lantiq: dts: drop falcon clock node
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / WBMR.dts
1 /dts-v1/;
2
3 #include "ar9.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
9 model = "Buffalo WBMR-HP-G300H";
10
11 chosen {
12 bootargs = "console=ttyLTQ0,115200";
13 };
14
15 aliases {
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
19 led-upgrade = &power_green;
20
21 led-dsl = &dsl;
22 led-internet = &online_green;
23 led-usb = &led_usb;
24 led-wifi = &wifi;
25 };
26
27 memory@0 {
28 device_type = "memory";
29 reg = <0x0 0x4000000>;
30 };
31
32 gpio-keys-polled {
33 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
35
36 wps {
37 label = "wps";
38 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_WPS_BUTTON>;
40 };
41 reset {
42 label = "reset";
43 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
45 };
46 eject {
47 label = "eject";
48 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_EJECTCD>;
50 };
51 movie {
52 label = "movie";
53 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_VIDEO>;
55 };
56 };
57
58 gpio-leds {
59 compatible = "gpio-leds";
60
61 power_green: power {
62 label = "wbmr:green:power";
63 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
64 default-state = "keep";
65 };
66 power_red: power2 {
67 label = "wbmr:red:power";
68 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
69 };
70 security {
71 label = "wbmr:yellow:security";
72 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
73 };
74 wifi: wifi {
75 label = "wbmr:green:wireless";
76 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
77 };
78 dsl: dsl {
79 label = "wbmr:green:dsl";
80 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
81 };
82 online_green: online {
83 label = "wbmr:green:internet";
84 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
85 };
86 online2 {
87 label = "wbmr:red:internet";
88 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
89 };
90 movie {
91 label = "wbmr:blue:movie";
92 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
93 };
94 led_usb: usb {
95 label = "wbmr:green:usb";
96 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
97 default-state = "on";
98 };
99 };
100
101 usb_vbus: regulator-usb-vbus {
102 compatible = "regulator-fixed";
103
104 regulator-name = "USB_VBUS";
105
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
108
109 gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
110 enable-active-high;
111 };
112 };
113
114 &gpio {
115 pinctrl-names = "default";
116 pinctrl-0 = <&state_default>;
117
118 state_default: pinmux {
119 pci-in {
120 lantiq,groups = "req1";
121 lantiq,output = <0>;
122 lantiq,open-drain = <1>;
123 lantiq,pull = <2>;
124 };
125 pci-out {
126 lantiq,groups = "gnt1";
127 lantiq,output = <1>;
128 lantiq,pull = <0>;
129 };
130 pci_rst {
131 lantiq,pins = "io21";
132 lantiq,pull = <0>;
133 lantiq,output = <1>;
134 };
135 };
136 };
137
138 &gsw {
139 phy-mode = "rgmii";
140 mtd-mac-address = <&boardconfig 0x10024>;
141 };
142
143 &pci0 {
144 status = "okay";
145 };
146
147 &localbus {
148 nor@0 {
149 compatible = "lantiq,nor";
150 bank-width = <2>;
151 reg = <0 0x0 0x2000000>;
152
153 partitions {
154 compatible = "fixed-partitions";
155 #address-cells = <1>;
156 #size-cells = <1>;
157
158 partition@0 {
159 label = "uboot";
160 reg = <0x00000 0x40000>;
161 read-only;
162 };
163
164 partition@40000 {
165 label = "uboot_env";
166 reg = <0x40000 0x20000>;
167 read-only;
168 };
169
170 partition@20000 {
171 label = "firmware";
172 reg = <0x60000 0x1f20000>;
173 };
174
175 boardconfig: partition@1fc0000 {
176 label = "board";
177 reg = <0x1fc0000 0x20000>;
178 read-only;
179 };
180
181 partition@1fe0000 {
182 label = "calibration";
183 reg = <0x1fe0000 0x20000>;
184 read-only;
185 };
186 };
187 };
188 };
189
190 &usb_phy0 {
191 status = "okay";
192 };
193
194 &usb0 {
195 status = "okay";
196 vbus-supply = <&usb_vbus>;
197 };