target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ar9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 cpu@0 {
  18                         compatible = "mips,mips34K";
  19                 };
  20         };
  21
  22         biu@1f800000 {
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25                 compatible = "lantiq,biu", "simple-bus";
  26                 reg = <0x1f800000 0x800000>;
  27                 ranges = <0x0 0x1f800000 0x7fffff>;
  28
  29                 icu0: icu@80200 {
  30                         #interrupt-cells = <1>;
  31                         interrupt-controller;
  32                         compatible = "lantiq,icu";
  33                         reg = <0x80200 0x28
  34                                 0x80228 0x28
  35                                 0x80250 0x28
  36                                 0x80278 0x28
  37                                 0x802a0 0x28>;
  38                 };
  39
  40                 watchdog@803f0 {
  41                         compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
  42                         reg = <0x803f0 0x10>;
  43
  44                         regmap = <&rcu0>;
  45                 };
  46         };
  47
  48         sram@1f000000 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "lantiq,sram", "simple-bus";
  52                 reg = <0x1f000000 0x800000>;
  53                 ranges = <0x0 0x1f000000 0x7fffff>;
  54
  55                 eiu0: eiu@101000 {
  56                         #interrupt-cells = <1>;
  57                         interrupt-controller;
  58                         compatible = "lantiq,eiu-xway";
  59                         reg = <0x101000 0x1000>;
  60                         interrupt-parent = <&icu0>;
  61                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  62                 };
  63
  64                 pmu0: pmu@102000 {
  65                         compatible = "lantiq,pmu-xway";
  66                         reg = <0x102000 0x1000>;
  67                 };
  68
  69                 cgu0: cgu@103000 {
  70                         compatible = "lantiq,cgu-xway";
  71                         reg = <0x103000 0x1000>;
  72                         #clock-cells = <1>;
  73                 };
  74
  75                 rcu0: rcu@203000 {
  76                         compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
  77                         reg = <0x203000 0x1000>;
  78                         ranges = <0x0 0x203000 0x100>;
  79                         big-endian;
  80
  81                         reset: reset-controller@10 {
  82                                 compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
  83                                 reg = <0x10 4>, <0x14 4>;
  84
  85                                 #reset-cells = <2>;
  86                         };
  87
  88                         usb_phy0: usb2-phy@18 {
  89                                 compatible = "lantiq,xrx100-usb2-phy";
  90                                 reg = <0x18 4>;
  91                                 status = "disabled";
  92
  93                                 resets = <&reset 4 4>;
  94                                 reset-names = "ctrl";
  95                                 #phy-cells = <0>;
  96                         };
  97
  98                         usb_phy1: usb2-phy@34 {
  99                                 compatible = "lantiq,xrx100-usb2-phy";
 100                                 reg = <0x34 4>;
 101                                 status = "disabled";
 102
 103                                 resets = <&reset 28 28>;
 104                                 reset-names = "ctrl";
 105                                 #phy-cells = <0>;
 106                         };
 107
 108                         reboot@10 {
 109                                 compatible = "syscon-reboot";
 110                                 reg = <0x10 4>;
 111
 112                                 regmap = <&rcu0>;
 113                                 offset = <0x10>;
 114                                 mask = <0x40000000>;
 115                         };
 116                 };
 117         };
 118
 119         fpi@10000000 {
 120                 #address-cells = <1>;
 121                 #size-cells = <1>;
 122                 compatible = "lantiq,fpi", "simple-bus";
 123                 ranges = <0x0 0x10000000 0xeefffff>;
 124                 reg = <0x10000000 0xef00000>;
 125
 126                 localbus: localbus@0 {
 127                         #address-cells = <2>;
 128                         #size-cells = <1>;
 129                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 130                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 131                         compatible = "lantiq,localbus", "simple-bus";
 132                 };
 133
 134                 gptu@e100a00 {
 135                         compatible = "lantiq,gptu-xway";
 136                         reg = <0xe100a00 0x100>;
 137                         interrupt-parent = <&icu0>;
 138                         interrupts = <126 127 128 129 130 131>;
 139                 };
 140
 141                 asc0: serial@e100400 {
 142                         compatible = "lantiq,asc";
 143                         reg = <0xe100400 0x400>;
 144                         interrupt-parent = <&icu0>;
 145                         interrupts = <104 105 106>;
 146                         status = "disabled";
 147                 };
 148
 149                 spi: spi@e100800 {
 150                         compatible = "lantiq,xrx100-spi";
 151                         reg = <0xe100800 0x100>;
 152                         interrupt-parent = <&icu0>;
 153                         interrupts = <22 23 24>;
 154                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 155                                         "spi_frm";
 156                         #address-cells = <1>;
 157                         #size-cells = <1>;
 158                         status = "disabled";
 159                 };
 160
 161                 gpio: pinmux@e100b10 {
 162                         compatible = "lantiq,xrx100-pinctrl";
 163                         #gpio-cells = <2>;
 164                         gpio-controller;
 165                         reg = <0xe100b10 0xa0>;
 166                 };
 167
 168                 stp: stp@e100bb0 {
 169                         #gpio-cells = <2>;
 170                         compatible = "lantiq,gpio-stp-xway";
 171                         gpio-controller;
 172                         reg = <0xe100bb0 0x40>;
 173                         status = "disabled";
 174                 };
 175
 176                 asc1: serial@e100c00 {
 177                         compatible = "lantiq,asc";
 178                         reg = <0xe100c00 0x400>;
 179                         interrupt-parent = <&icu0>;
 180                         interrupts = <112 113 114>;
 181                 };
 182
 183                 usb0: usb@e101000 {
 184                         compatible = "lantiq,arx100-usb";
 185                         reg = <0xe101000 0x1000
 186                                 0xe120000 0x3f000>;
 187                         interrupt-parent = <&icu0>;
 188                         interrupts = <62 91>;
 189                         dr_mode = "host";
 190                         phys = <&usb_phy0>;
 191                         phy-names = "usb2-phy";
 192                         status = "disabled";
 193                 };
 194
 195                 usb1: usb@e106000 {
 196                         compatible = "lantiq,arx100-usb";
 197                         reg = <0xe106000 0x1000
 198                                 0xe1e0000 0x3f000>;
 199                         interrupt-parent = <&icu0>;
 200                         interrupts = <91>;
 201                         dr_mode = "host";
 202                         phys = <&usb_phy1>;
 203                         phy-names = "usb2-phy";
 204                         status = "disabled";
 205                 };
 206
 207                 deu@e103100 {
 208                         compatible = "lantiq,deu-arx100";
 209                         reg = <0xe103100 0xf00>;
 210                 };
 211
 212                 dma0: dma@e104100 {
 213                         compatible = "lantiq,dma-xway";
 214                         reg = <0xe104100 0x800>;
 215                 };
 216
 217                 ebu0: ebu@e105300 {
 218                         compatible = "lantiq,ebu-xway";
 219                         reg = <0xe105300 0x100>;
 220                 };
 221
 222                 mei@e116000 {
 223                         compatible = "lantiq,mei-xway";
 224                         interrupt-parent = <&icu0>;
 225                         interrupts = <63>;
 226                 };
 227
 228                 gsw: etop@e180000 {
 229                         compatible = "lantiq,etop-xway";
 230                         reg = <0xe180000 0x40000
 231                                 0xe108000 0x200>;
 232                         interrupt-parent = <&icu0>;
 233                         interrupts = <73 72>;
 234                         mac-address = [ 00 11 22 33 44 55 ];
 235                 };
 236
 237                 ppe@e234000 {
 238                         compatible = "lantiq,ppe-arx100";
 239                         interrupt-parent = <&icu0>;
 240                         interrupts = <96>;
 241                 };
 242
 243                 pci0: pci@e105400 {
 244                         status = "disabled";
 245                         #address-cells = <3>;
 246                         #size-cells = <2>;
 247                         #interrupt-cells = <1>;
 248                         compatible = "lantiq,pci-xway";
 249                         bus-range = <0x0 0x0>;
 250                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 251                                   0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 252                         reg = <0x7000000 0x8000         /* config space */
 253                                 0xe105400 0x400>;       /* pci bridge */
 254                         lantiq,bus-clock = <33333333>;
 255                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 256                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 257                         req-mask = <0x1>;
 258                 };
 259         };
 260
 261         adsl {
 262                 compatible = "lantiq,adsl-arx100";
 263         };
 264 };