kernel: update linux 3.2 to 3.2.13 and refresh patches
[openwrt/staging/mkresin.git] / target / linux / lantiq / patches-3.2 / 0041-MIPS-lantiq-add-xway-nand-driver.patch
1 From 9c7a6f8804aef7559ee8edcb7466676ee7d00c09 Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Sat, 27 Aug 2011 20:08:14 +0200
4 Subject: [PATCH 41/70] MIPS: lantiq: add xway nand driver
5
6 This patch adds a nand driver for XWAY SoCs. The patch makes use of the
7 plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the
8 endianess swap problem on read. To workaround this problem we make the
9 read_byte() callback available via the plat_nand driver causing the nand
10 layer to do byte reads.
11
12 Signed-off-by: John Crispin <blogic@openwrt.org>
13
14 TODO : memory ranges
15 cs lines
16 plat dev
17 ebu2 and not ebu1 ?
18 ---
19 .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +
20 arch/mips/lantiq/xway/Makefile | 2 +-
21 arch/mips/lantiq/xway/devices.h | 1 +
22 arch/mips/lantiq/xway/nand.c | 216 ++++++++++++++++++++
23 drivers/mtd/nand/plat_nand.c | 1 +
24 include/linux/mtd/nand.h | 1 +
25 6 files changed, 222 insertions(+), 1 deletions(-)
26 create mode 100644 arch/mips/lantiq/xway/nand.c
27
28 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
29 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
30 @@ -145,6 +145,8 @@
31 /* register access macros for EBU and CGU */
32 #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
33 #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
34 +#define ltq_ebu_w32_mask(x, y, z) \
35 + ltq_w32_mask(x, y, ltq_ebu_membase + (z))
36 #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
37 #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
38
39 --- a/arch/mips/lantiq/xway/Makefile
40 +++ b/arch/mips/lantiq/xway/Makefile
41 @@ -1,4 +1,4 @@
42 -obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
43 +obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
44
45 obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
46 obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
47 --- a/arch/mips/lantiq/xway/devices.h
48 +++ b/arch/mips/lantiq/xway/devices.h
49 @@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
50 extern void ltq_register_gpio_stp(void);
51 extern void ltq_register_ase_asc(void);
52 extern void ltq_register_etop(struct ltq_eth_data *eth);
53 +extern void xway_register_nand(struct mtd_partition *parts, int count);
54
55 #endif
56 --- /dev/null
57 +++ b/arch/mips/lantiq/xway/nand.c
58 @@ -0,0 +1,216 @@
59 +/*
60 + * This program is free software; you can redistribute it and/or modify it
61 + * under the terms of the GNU General Public License version 2 as published
62 + * by the Free Software Foundation.
63 + *
64 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
65 + */
66 +
67 +#include <linux/mtd/physmap.h>
68 +#include <linux/mtd/nand.h>
69 +#include <linux/platform_device.h>
70 +#include <linux/io.h>
71 +
72 +#include <lantiq_soc.h>
73 +#include <lantiq_irq.h>
74 +#include <lantiq_platform.h>
75 +
76 +#include "devices.h"
77 +
78 +/* nand registers */
79 +#define LTQ_EBU_NAND_WAIT 0xB4
80 +#define LTQ_EBU_NAND_ECC0 0xB8
81 +#define LTQ_EBU_NAND_ECC_AC 0xBC
82 +#define LTQ_EBU_NAND_CON 0xB0
83 +#define LTQ_EBU_ADDSEL1 0x24
84 +
85 +/* gpio definitions */
86 +#define PIN_ALE 13
87 +#define PIN_CLE 24
88 +#define PIN_CS1 23
89 +#define PIN_RDY 48 /* NFLASH_READY */
90 +#define PIN_RD 49 /* NFLASH_READ_N */
91 +
92 +#define NAND_CMD_ALE (1 << 2)
93 +#define NAND_CMD_CLE (1 << 3)
94 +#define NAND_CMD_CS (1 << 4)
95 +#define NAND_WRITE_CMD_RESET 0xff
96 +#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
97 +#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
98 +#define NAND_WRITE_DATA (NAND_CMD_CS)
99 +#define NAND_READ_DATA (NAND_CMD_CS)
100 +#define NAND_WAIT_WR_C (1 << 3)
101 +#define NAND_WAIT_RD (0x1)
102 +
103 +#define ADDSEL1_MASK(x) (x << 4)
104 +#define ADDSEL1_REGEN 1
105 +#define BUSCON1_SETUP (1 << 22)
106 +#define BUSCON1_BCGEN_RES (0x3 << 12)
107 +#define BUSCON1_WAITWRC2 (2 << 8)
108 +#define BUSCON1_WAITRDC2 (2 << 6)
109 +#define BUSCON1_HOLDC1 (1 << 4)
110 +#define BUSCON1_RECOVC1 (1 << 2)
111 +#define BUSCON1_CMULT4 1
112 +#define NAND_CON_NANDM 1
113 +#define NAND_CON_CSMUX (1 << 1)
114 +#define NAND_CON_CS_P (1 << 4)
115 +#define NAND_CON_SE_P (1 << 5)
116 +#define NAND_CON_WP_P (1 << 6)
117 +#define NAND_CON_PRE_P (1 << 7)
118 +#define NAND_CON_IN_CS0 0
119 +#define NAND_CON_OUT_CS0 0
120 +#define NAND_CON_IN_CS1 (1 << 8)
121 +#define NAND_CON_OUT_CS1 (1 << 10)
122 +#define NAND_CON_CE (1 << 20)
123 +
124 +#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000)
125 +
126 +static const char *part_probes[] = { "cmdlinepart", NULL };
127 +
128 +static void xway_select_chip(struct mtd_info *mtd, int chip)
129 +{
130 + switch (chip) {
131 + case -1:
132 + ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
133 + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
134 + break;
135 + case 0:
136 + ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
137 + ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
138 + /* reset the nand chip */
139 + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
140 + ;
141 + ltq_w32(NAND_WRITE_CMD_RESET,
142 + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
143 + break;
144 + default:
145 + BUG();
146 + }
147 +}
148 +
149 +static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
150 +{
151 + struct nand_chip *this = mtd->priv;
152 +
153 + if (ctrl & NAND_CTRL_CHANGE) {
154 + if (ctrl & NAND_CLE)
155 + this->IO_ADDR_W = (void __iomem *)
156 + (NAND_BASE_ADDRESS | NAND_WRITE_CMD);
157 + else if (ctrl & NAND_ALE)
158 + this->IO_ADDR_W = (void __iomem *)
159 + (NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
160 + }
161 +
162 + if (data != NAND_CMD_NONE) {
163 + *(volatile u8*) ((u32) this->IO_ADDR_W) = data;
164 + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
165 + ;
166 + }
167 +}
168 +
169 +static int xway_dev_ready(struct mtd_info *mtd)
170 +{
171 + return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
172 +}
173 +
174 +void nand_write(unsigned int addr, unsigned int val)
175 +{
176 + ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr)));
177 + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
178 + ;
179 +}
180 +
181 +unsigned char xway_read_byte(struct mtd_info *mtd)
182 +{
183 + return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
184 +}
185 +
186 +static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
187 +{
188 + int i;
189 +
190 + for (i = 0; i < len; i++)
191 + {
192 + unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
193 + buf[i] = res8;
194 + }
195 +}
196 +
197 +static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
198 +{
199 + int i;
200 +
201 + for (i = 0; i < len; i++)
202 + {
203 + ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA))));
204 + while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
205 + }
206 +}
207 +
208 +int xway_probe(struct platform_device *pdev)
209 +{
210 + /* might need this later ?
211 + ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1");
212 + */
213 + ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE");
214 + ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE");
215 + if (ltq_is_ar9() || ltq_is_vr9()) {
216 + ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY");
217 + ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD");
218 + }
219 +
220 + ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
221 + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
222 +
223 + ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
224 + | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
225 + | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
226 +
227 + ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
228 + | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
229 + | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
230 +
231 + ltq_w32(NAND_WRITE_CMD_RESET,
232 + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
233 + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
234 + ;
235 +
236 + return 0;
237 +}
238 +
239 +static struct platform_nand_data falcon_flash_nand_data = {
240 + .chip = {
241 + .nr_chips = 1,
242 + .chip_delay = 30,
243 + .part_probe_types = part_probes,
244 + },
245 + .ctrl = {
246 + .probe = xway_probe,
247 + .cmd_ctrl = xway_cmd_ctrl,
248 + .dev_ready = xway_dev_ready,
249 + .select_chip = xway_select_chip,
250 + .read_byte = xway_read_byte,
251 + .read_buf = xway_read_buf,
252 + .write_buf = xway_write_buf,
253 + }
254 +};
255 +
256 +static struct resource ltq_nand_res =
257 + MEM_RES("nand", 0x14000000, 0x7ffffff);
258 +
259 +static struct platform_device ltq_flash_nand = {
260 + .name = "gen_nand",
261 + .id = -1,
262 + .num_resources = 1,
263 + .resource = &ltq_nand_res,
264 + .dev = {
265 + .platform_data = &falcon_flash_nand_data,
266 + },
267 +};
268 +
269 +void __init xway_register_nand(struct mtd_partition *parts, int count)
270 +{
271 + falcon_flash_nand_data.chip.partitions = parts;
272 + falcon_flash_nand_data.chip.nr_partitions = count;
273 + platform_device_register(&ltq_flash_nand);
274 +}
275 --- a/drivers/mtd/nand/plat_nand.c
276 +++ b/drivers/mtd/nand/plat_nand.c
277 @@ -75,6 +75,7 @@ static int __devinit plat_nand_probe(str
278 data->chip.select_chip = pdata->ctrl.select_chip;
279 data->chip.write_buf = pdata->ctrl.write_buf;
280 data->chip.read_buf = pdata->ctrl.read_buf;
281 + data->chip.read_byte = pdata->ctrl.read_byte;
282 data->chip.chip_delay = pdata->chip.chip_delay;
283 data->chip.options |= pdata->chip.options;
284 data->chip.bbt_options |= pdata->chip.bbt_options;
285 --- a/include/linux/mtd/nand.h
286 +++ b/include/linux/mtd/nand.h
287 @@ -651,6 +651,7 @@ struct platform_nand_ctrl {
288 void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
289 void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
290 void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
291 + unsigned char (*read_byte)(struct mtd_info *mtd);
292 void *priv;
293 };
294