0d45feec153263a16525692baec26e71c4214680
[openwrt/staging/mkresin.git] / target / linux / ramips / dts / HC5661A.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
10 model = "HiWiFi HC5661A";
11
12 aliases {
13 led-status = &led_system;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200";
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x8000000>;
23 };
24
25 sdhci@10130000 {
26 status = "okay";
27 };
28
29 gpio-leds {
30 compatible = "gpio-leds";
31
32 led_system: system {
33 label = "hc5661a:blue:system";
34 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
35 };
36 internet {
37 label = "hc5661a:blue:internet";
38 gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
39 };
40 wlan2g {
41 label = "hc5661a:blue:wlan2g";
42 gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
43 };
44 };
45
46 gpio-keys {
47 compatible = "gpio-keys-polled";
48 poll-interval = <20>;
49
50 reset {
51 label = "reset";
52 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_RESTART>;
54 };
55 };
56 };
57
58 &pinctrl {
59 state_default: pinctrl0 {
60 gpio {
61 ralink,group = "i2c", "refclk", "wled_an";
62 ralink,function = "gpio";
63 };
64 };
65 };
66
67 &spi0 {
68 status = "okay";
69
70 m25p80@0 {
71 compatible = "jedec,spi-nor";
72 reg = <0>;
73 linux,modalias = "m25p80", "w25q128";
74 spi-max-frequency = <10000000>;
75 m25p,chunked-io = <32>;
76
77 partitions {
78 compatible = "fixed-partitions";
79 #address-cells = <1>;
80 #size-cells = <1>;
81
82 partition@0 {
83 label = "u-boot";
84 reg = <0x0 0x30000>;
85 read-only;
86 };
87
88 partition@30000 {
89 label = "hw_panic";
90 reg = <0x30000 0x10000>;
91 read-only;
92 };
93
94 factory: partition@40000 {
95 label = "factory";
96 reg = <0x40000 0x10000>;
97 read-only;
98 };
99
100 partition@50000 {
101 label = "firmware";
102 reg = <0x50000 0xf70000>;
103 };
104
105 partition@fc0000 {
106 label = "oem";
107 reg = <0xfc0000 0x20000>;
108 read-only;
109 };
110
111 bdinfo: partition@fe0000 {
112 label = "bdinfo";
113 reg = <0xfe0000 0x10000>;
114 read-only;
115 };
116
117 partition@ff0000 {
118 label = "backup";
119 reg = <0xff0000 0x10000>;
120 read-only;
121 };
122 };
123 };
124 };
125
126 &ethernet {
127 mtd-mac-address = <&factory 0x4>;
128 mediatek,portmap = "wllll";
129 };
130
131 &wmac {
132 status = "okay";
133 };