target/linux/ramips/dts/WNCE2001.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,wnce2001", "ralink,rt3052-soc";
  10         model = "Netgear WNCE2001";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         gpio-leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power_green: power-green {
  27                         label = "wnce2001:green:power";
  28                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 power-red {
  32                         label = "wnce2001:red:power";
  33                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 wlan-green {
  37                         label = "wnce2001:green:wlan";
  38                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  39                 };
  40
  41                 wlan-red {
  42                         label = "wnce2001:red:wlan";
  43                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  44                 };
  45         };
  46
  47         gpio-keys-polled {
  48                 compatible = "gpio-keys-polled";
  49                 poll-interval = <20>;
  50
  51                 reset {
  52                         label = "reset";
  53                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56
  57                 wps {
  58                         label = "wps";
  59                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_WPS_BUTTON>;
  61                 };
  62
  63                 rt {
  64                         label = "rt";
  65                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  66                         linux,code = <BTN_0>;
  67                 };
  68
  69                 ap {
  70                         label = "ap";
  71                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  72                         linux,code = <BTN_1>;
  73                 };
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         m25p80@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <10000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x30000>;
  93                                 read-only;
  94                         };
  95
  96                         factory: partition@30000 {
  97                                 label = "factory";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@40000 {
 103                                 label = "config";
 104                                 reg = <0x40000 0x20000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@60000 {
 109                                 label = "language";
 110                                 reg = <0x60000 0x30000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@90000 {
 115                                 label = "pot";
 116                                 reg = <0x90000 0x10000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@a0000 {
 121                                 label = "checksum";
 122                                 reg = <0xa0000 0x10000>;
 123                         };
 124
 125                         partition@b0000 {
 126                                 label = "firmware";
 127                                 reg = <0xb0000 0x350000>;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &pinctrl {
 134         state_default: pinctrl0 {
 135                 gpio {
 136                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 137                         ralink,function = "gpio";
 138                 };
 139         };
 140 };
 141
 142 &ethernet {
 143         mtd-mac-address = <&factory 0x28>;
 144 };
 145
 146 &wmac {
 147         ralink,mtd-eeprom = <&factory 0>;
 148 };