lantiq: kernel 4.14: cleanup dts files

[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / FRITZ7320.dts

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts
index 34d0df9b3b39b7ee326cc722cb1487d8fe3dc3f1..e6334d46df8ae8a83f8f706dadc46a3241deaa60 100644 (file)
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts
@@ -26,80 +26,6 @@
                reg = <0x0 0x4000000>;
        };
 
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x1000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       ath9k_cal: partition@0 {
-                                               label = "urlader";
-                                               reg = <0x00000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       partition@20000 {
-                                               label = "firmware";
-                                               reg = <0x20000 0xf60000>;
-                                       };
-
-                                       partition@f80000 {
-                                               label = "tffs (1)";
-                                               reg = <0xf80000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       partition@fc0000 {
-                                               label = "tffs (2)";
-                                               reg = <0xfc0000 0x40000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               pci {
-                                       lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
-                                       lantiq,function = "pci";
-                               };
-                               pci-in {
-                                       lantiq,groups = "req1", "req2", "req3", "req4";
-                                       lantiq,output = <0>;
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                               };
-                               pci-out {
-                                       lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
-                                       lantiq,output = <1>;
-                                       lantiq,pull = <0>;
-                               };
-                       };
-               };
-
-               etop@E180000 {
-                       phy-mode = "mii";
-                       mtd-mac-address = <&ath9k_cal 0xa91>;
-                       mtd-mac-address-increment = <(-2)>;
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-               };
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -148,6 +74,74 @@
        };
 };
 
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci {
+                       lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
+                       lantiq,function = "pci";
+               };
+               pci-in {
+                       lantiq,groups = "req1", "req2", "req3", "req4";
+                       lantiq,output = <0>;
+                       lantiq,open-drain = <1>;
+                       lantiq,pull = <2>;
+               };
+               pci-out {
+                       lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
+                       lantiq,output = <1>;
+                       lantiq,pull = <0>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mtd-mac-address = <&ath9k_cal 0xa91>;
+       mtd-mac-address-increment = <(-2)>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x1000000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       ath9k_cal: partition@0 {
+                               label = "urlader";
+                               reg = <0x00000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x20000 0xf60000>;
+                       };
+
+                       partition@f80000 {
+                               label = "tffs (1)";
+                               reg = <0xf80000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "tffs (2)";
+                               reg = <0xfc0000 0x40000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
 &pci0 {
        status = "okay";
        req-mask = <0xf>;
@@ -159,3 +153,7 @@
                qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
        };
 };
+
+&usb0 {
+       status = "okay";
+};