include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-LOADADDR:=0x00008000
-
-define Image/Build/DTB
- cp $(KDIR)/zImage$(2) $(KDIR)/zImage$(2)-$(1);
- cat $(DTS_DIR)/$(1).dtb >> $(KDIR)/zImage$(2)-$(1);
- $(call Image/BuildKernel/MkuImage, \
- none, $(LOADADDR), $(LOADADDR), \
- $(KDIR)/zImage$(2)-$(1), $(KDIR)/uImage$(2)-$(1))
-endef
-
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-# $(4): Page Size
-# $(5): Sub-Page Size (optional)
-# $(6): VID offset (optional)
-define NANDProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/BuildSysupgrade
- $(call Image/Build/SysupgradeNAND,$(2),$$(1),$(KDIR)/uImage-$(2))
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- cp $(KDIR)/uImage-initramfs-$(2) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-initramfs
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(call Image/Build/UbinizeImage,$(2),,squashfs, -p $(3) -m $(4) $(if $(5),-s $(5)) $(if $(6),-O $(6)))
- endef
-
- PROFILES_LIST += $(1)
-endef
-
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-define UBINORProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(call Image/Build/UbinizeImage,$(2),,squashfs, -p $(3) -m 1)
- endef
-
- PROFILES_LIST += $(1)
-endef
-
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-define NORProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- ( \
- dd if=$(KDIR)/uImage-$(2) bs=$(3) conv=sync; \
- dd if=$(KDIR)/root.squashfs bs=$(3) conv=sync; \
- ) > $$(BIN_DIR)/$$(IMG_PREFIX)-$(2)-squashfs-firmware.bin
- endef
-
- PROFILES_LIST += $(1)
-endef
-
-# $(1): Profile Name
-# $(2): DTB Name
-define MMCProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- cp $(KDIR)/zImage-$(2) $(BIN_DIR)/zImage-$(1);
- cp $(DTS_DIR)/$(2).dtb $(BIN_DIR)/$(1).dtb;
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- cp $(KDIR)/uImage-initramfs-$(2) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-initramfs
- endef
-
- PROFILES_LIST += $(1)
-endef
-
-# $(1): Profile Name
-# $(2): Sub Profiles list
-define MultiProfile
- define Image/BuildKernel/Profile/$(1)
- $(foreach profile, $(2),
- $(call Image/BuildKernel/Profile/$(profile)))
- endef
-
- define Image/Build/Profile/$(1)/BuildSysupgrade
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/BuildSysupgrade,$$(1)))
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/Initramfs))
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/squashfs))
- endef
-endef
-
-# Boards with NAND, without subpages
-$(eval $(call NANDProfile,370-DB,armada-370-db,512KiB,4096))
-$(eval $(call NANDProfile,370-RD,armada-370-rd,512KiB,4096))
-$(eval $(call NANDProfile,385-DB-AP,armada-385-db-ap,256KiB,4096))
-$(eval $(call NANDProfile,Mirabox,armada-370-mirabox,512KiB,4096))
-$(eval $(call NANDProfile,XP-DB,armada-xp-db,512KiB,4096))
-$(eval $(call NANDProfile,XP-GP,armada-xp-gp,512KiB,4096))
-
-# Boards with NAND, with subpages
-$(eval $(call NANDProfile,Mamba,armada-xp-linksys-mamba,128KiB,2048,512,2048))
-$(eval $(call NANDProfile,Caiman,armada-385-linksys-caiman,128KiB,2048,512,2048))
-$(eval $(call NANDProfile,Cobra,armada-385-linksys-cobra,128KiB,2048,512,2048))
-$(eval $(call NANDProfile,Shelby,armada-385-linksys-shelby,128KiB,2048,512,2048))
-
-# Boards with large NOR, where we want to use UBI
-$(eval $(call UBINORProfile,OpenBlocks-AX-3-4,armada-xp-openblocks-ax3-4,128KiB))
-
-# Boards with small NOR, where UBI doesn't make sense
-$(eval $(call NORProfile,388-RD,armada-388-rd,256KiB))
-
-$(eval $(call MMCProfile,Solidrun-Clearfog-A1,armada-388-clearfog))
-
-###
-### Linksys
-###
-
-# Caiman: Linksys WRT1200AC
-define Image/Build/Profile/Caiman/squashfs
- $(call Image/Build/UbinizeImage,armada-385-linksys-caiman,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048)
- ( \
- dd if=$(KDIR)/uImage-armada-385-linksys-caiman bs=6M conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-385-linksys-caiman-squashfs-ubinized.bin \
- bs=2048 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-385-linksys-caiman-squashfs-factory.img
-endef
-
-# Cobra: Linksys WRT1900ACv2
-define Image/Build/Profile/Cobra/squashfs
- $(call Image/Build/UbinizeImage,armada-385-linksys-cobra,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048)
- ( \
- dd if=$(KDIR)/uImage-armada-385-linksys-cobra bs=6M conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-385-linksys-cobra-squashfs-ubinized.bin \
- bs=2048 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-385-linksys-cobra-squashfs-factory.img
-endef
-
-# Mamba: Linksys WRT1900AC
-define Image/Build/Profile/Mamba/squashfs
- $(call Image/Build/UbinizeImage,armada-xp-linksys-mamba,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048)
- ( \
- dd if=$(KDIR)/uImage-armada-xp-linksys-mamba bs=3072k conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-xp-linksys-mamba-squashfs-ubinized.bin \
- bs=2048 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-xp-linksys-mamba-squashfs-factory.img
-endef
-
-# Shelby: Linksys WRT1900ACS
-define Image/Build/Profile/Shelby/squashfs
- $(call Image/Build/UbinizeImage,armada-385-linksys-shelby,,squashfs, -p 128KiB -m 2048 -s 512 -O 2048)
- ( \
- dd if=$(KDIR)/uImage-armada-385-linksys-shelby bs=6M conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-385-linksys-shelby-squashfs-ubinized.bin \
- bs=2048 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-385-linksys-shelby-squashfs-factory.img
-endef
-
-###
-### Marvell
-###
-
-# Marvell Armada 385 Access Point Development board (DB-88F6820-AP)
-define Image/Build/Profile/385-DB-AP/squashfs
- $(call Image/Build/UbinizeImage,armada-385-db-ap,,squashfs, -p 256KiB -m 4096)
- ( \
- dd if=$(KDIR)/uImage-armada-385-db-ap bs=8M conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-385-db-ap-squashfs-ubinized.bin \
- bs=4096 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-385-db-ap-squashfs-factory.img
-endef
-
-
-# The Default profile should build everything
-$(eval $(call MultiProfile,Default,$(PROFILES_LIST)))
+KERNEL_LOADADDR := 0x00008000
-define Image/BuildKernel
- $(call Image/BuildKernel/Profile/$(PROFILE))
-endef
+DEVICE_VARS += KERNEL_SIZE
-define Image/Build/squashfs
- # Align the squashfs image size before calling the profiles,
- # otherwise the size would keep growing
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- $(call Image/Build/Profile/$(PROFILE)/squashfs)
+define Build/dtb
+ $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
endef
-
-define Image/Build
- $(call Image/Build/$(1))
- $(call Image/Build/Profile/$(PROFILE)/BuildSysupgrade,$(1))
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile/$(PROFILE)/Initramfs)
-endif
+
+define Build/clearfog-bundle
+ rm -f $@.new
+ $(TAR) -cp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@.new -C $(TARGET_DIR)/ .
+ $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@.new -C $(dir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL)) $(notdir $(IMAGE_KERNEL).dtb)
+ gzip -9n -c $@.new > $@
+endef
+
+
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS := $(1)
+ BOARD_NAME = $$(DEVICE_DTS)
+ KERNEL_NAME := zImage
+ KERNEL := kernel-bin | append-dtb | uImage none
+endef
+
+define Device/UBI
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar
+endef
+
+define Device/UBI-factory
+ $(Device/UBI)
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+endef
+
+define Device/NAND-128K
+ $(Device/UBI)
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+endef
+
+define Device/NAND-256K
+ $(Device/UBI)
+ BLOCKSIZE := 256KiB
+ PAGESIZE := 4096
+endef
+
+define Device/NAND-512K
+ $(Device/UBI)
+ BLOCKSIZE := 512KiB
+ PAGESIZE := 4096
+endef
+
+define Device/linksys
+ DEVICE_TITLE := Linksys $(1)
+ DEVICE_PACKAGES := kmod-mwlwifi wpad-mini swconfig
+endef
+
+define Device/armada-385-linksys
+ $(Device/NAND-128K)
+ $(Device/UBI-factory)
+ KERNEL_SIZE := 6144k
+endef
+
+define Device/linksys-wrt1200ac
+ $(call Device/linksys,WRT1200AC (Caiman))
+ $(Device/armada-385-linksys)
+ DEVICE_DTS := armada-385-linksys-caiman
+endef
+TARGET_DEVICES += linksys-wrt1200ac
+
+define Device/linksys-wrt1900acv2
+ $(call Device/linksys,WRT1900ACv2 (Cobra))
+ $(Device/armada-385-linksys)
+ DEVICE_DTS := armada-385-linksys-cobra
+endef
+TARGET_DEVICES += linksys-wrt1900acv2
+
+define Device/linksys-wrt1900acs
+ $(call Device/linksys,WRT1900ACS (Shelby))
+ $(Device/armada-385-linksys)
+ DEVICE_DTS := armada-385-linksys-shelby
+endef
+TARGET_DEVICES += linksys-wrt1900acs
+
+define Device/linksys-wrt1900ac
+ $(call Device/linksys,WRT1900AC (Mamba))
+ DEVICE_DTS := armada-xp-linksys-mamba
+ $(Device/NAND-128K)
+ $(Device/UBI-factory)
+ KERNEL_SIZE := 3072k
+endef
+TARGET_DEVICES += linksys-wrt1900ac
+
+define Device/openblocks-ax3
+ $(Device/UBI-factory)
+ DEVICE_DTS := armada-xp-openblocks-ax3-4
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 1
+ IMAGE/factory.img := append-kernel $$$$(KERNEL_SIZE) | append-ubi
+ DEVICE_TITLE := Plat'Home OpenBlocks AX3
+endef
+TARGET_DEVICES += openblocks-ax3
+
+define Device/armada-385-db-ap
+ $(Device/NAND-256K)
+ $(Device/UBI-factory)
+ KERNEL_SIZE := 8192k
+ DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
+endef
+TARGET_DEVICES += armada-385-db-ap
+
+define Device/marvell-nand
+ $(Device/NAND-512K)
+ DEVICE_TITLE := Marvell Armada $(1)
+endef
+
+Device/armada-370-db = $(call Device/marvell-nand,370 DB (DB-88F6710-BP-DDR3))
+Device/armada-370-rd = $(call Device/marvell-nand,370 RD (RD-88F6710-A1))
+Device/armada-xp-db = $(call Device/marvell-nand,XP DB (DB-78460-BP))
+Device/armada-xp-gp = $(call Device/marvell-nand,XP GP (DB-MV784MP-GP))
+TARGET_DEVICES += armada-370-db armada-370-rd armada-xp-db armada-xp-gp
+
+define Device/armada-388-rd
+ DEVICE_TITLE := Marvell Armada 388 RD (RD-88F6820-AP)
+ IMAGES := firmware.bin
+ IMAGE/firmware.bin := append-kernel 256k | append-rootfs | pad-rootfs
+endef
+TARGET_DEVICES += armada-388-rd
+
+define Device/armada-388-clearfog
+ KERNEL_INSTALL := 1
+ KERNEL := dtb | kernel-bin
+ DEVICE_TITLE := SolidRun ClearFog
+ DEVICE_PACKAGES := uboot-mvebu-clearfog
+ IMAGES := bundle.tar.gz
+ IMAGE/bundle.tar.gz := clearfog-bundle
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(2)
+endef
+TARGET_DEVICES += armada-388-clearfog
+
+define Device/globalscale-mirabox
+ $(Device/NAND-512K)
+ DEVICE_DTS := armada-370-mirabox
+ DEVICE_TITLE := Globalscale Mirabox
endef
+TARGET_DEVICES += globalscale-mirabox
$(eval $(call BuildImage))
projects / openwrt / staging / mkresin.git / blobdiff