X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fmkresin.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=fca3398f2d3e34f2c597db27469293480f222673;hp=f958ac2bd081f0193b7c05153f6098fc770347b4;hb=7bf6b5972419d95745b894bf86a20de45883ca7f;hpb=9f0e2335764674d0324dd90adb3e185cc8befe5f

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f958ac2bd0..fca3398f2d 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -33,6 +33,7 @@ ramips_setup_interfaces()
 	case $board in
 	11acnas|\
 	d-team,newifi-d2|\
+	dir-615-h1|\
 	w2914nsv2|\
 	zbt-we2026)
 		ucidef_add_switch "switch0" \
@@ -107,7 +108,6 @@ ramips_setup_interfaces()
 	mtc,wr1201|\
 	mzk-750dhp|\
 	mzk-w300nh2|\
-	netgear,r6120|\
 	nixcore-x1-8M|\
 	nixcore-x1-16M|\
 	oy-0001|\
@@ -142,6 +142,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
+	gehua,ghl-r-001)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+		;;
 	alfa-network,awusfree1|\
 	cs-qr10|\
 	d105|\
@@ -218,13 +222,14 @@ ramips_setup_interfaces()
 	jhr-n805r|\
 	jhr-n825r|\
 	jhr-n926r|\
+	mikrotik,rb750gr3|\
 	mikrotik,rbm33g|\
 	mzk-wdpr|\
-	rb750gr3|\
 	rt-n14u|\
 	skylab,skw92a|\
 	tplink,c20-v4|\
 	tplink,c50-v3|\
+	tplink,c50-v4|\
 	tplink,tl-mr3420-v5|\
 	tplink,tl-wr842n-v5|\
 	tl-wr840n-v4|\
@@ -313,6 +318,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
 		;;
+	iodata,wn-ac1167gr)
+		ucidef_add_switch "switch1" \
+			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+		;;
 	kn_rf)
 		ucidef_add_switch "switch0" \
 			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
@@ -331,6 +340,10 @@ ramips_setup_interfaces()
 			"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
 		ucidef_set_interface_wan "usb0"
 		;;
+	netgear,r6120)
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+		;;
 	hc5761)
 		ucidef_add_switch "switch0" \
 			"1:lan" "4:lan" "0:wan" "6@eth0"
@@ -519,6 +532,9 @@ ramips_setup_macs()
 		[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
+	iodata,wn-ac1167gr)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" -1)
+		;;
 	iodata,wn-ax1167gr|\
 	iodata,wn-gx300gr)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)