-Index: linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_chipcommon.c
-+++ linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-@@ -39,12 +39,14 @@ static inline void chipco_write32(struct
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -39,12 +39,14 @@
ssb_write32(cc->dev, offset, value);
}
}
void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
-@@ -355,16 +357,37 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
+@@ -355,16 +357,37 @@
{
return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
}
#ifdef CONFIG_SSB_SERIAL
int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.17/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_extif.c
-+++ linux-2.6.23.17/drivers/ssb/driver_extif.c
-@@ -27,12 +27,14 @@ static inline void extif_write32(struct
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -27,12 +27,14 @@
ssb_write32(extif->dev, offset, value);
}
}
#ifdef CONFIG_SSB_SERIAL
-@@ -114,16 +116,30 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
+@@ -114,16 +116,30 @@
{
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
}
+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
+}
+EXPORT_SYMBOL(ssb_extif_gpio_intmask);
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_chipcommon.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -382,11 +382,13 @@ extern void ssb_chipco_set_clockmode(str
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -382,11 +382,13 @@
extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
u32 ticks);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_extif.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_extif.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_extif.h
-@@ -171,11 +171,12 @@ extern void ssb_extif_get_clockcontrol(s
+--- a/include/linux/ssb/ssb_driver_extif.h
++++ b/include/linux/ssb/ssb_driver_extif.h
+@@ -171,11 +171,12 @@
extern void ssb_extif_timing_init(struct ssb_extif *extif,
unsigned long ns);
-Index: linux-2.6.23.17/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/Kconfig
-+++ linux-2.6.23.17/arch/mips/Kconfig
-@@ -4,6 +4,10 @@ config MIPS
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -4,6 +4,10 @@
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
mainmenu "Linux/MIPS Kernel Configuration"
menu "Machine selection"
-@@ -44,6 +48,23 @@ config BASLER_EXCITE_PROTOTYPE
+@@ -44,6 +48,23 @@
note that a kernel built with this option selected will not be
able to run on normal units.
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
-Index: linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/cpu-probe.c
-+++ linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-@@ -793,6 +793,28 @@ static inline void cpu_probe_philips(str
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -793,6 +793,28 @@
}
__init void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
-@@ -815,6 +837,9 @@ __init void cpu_probe(void)
+@@ -815,6 +837,9 @@
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c);
break;
-Index: linux-2.6.23.17/arch/mips/kernel/proc.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/proc.c
-+++ linux-2.6.23.17/arch/mips/kernel/proc.c
-@@ -82,6 +82,8 @@ static const char *cpu_name[] = {
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -82,6 +82,8 @@
[CPU_VR4181] = "NEC VR4181",
[CPU_VR4181A] = "NEC VR4181A",
[CPU_SR71000] = "Sandcraft SR71000",
[CPU_PR4450] = "Philips PR4450",
[CPU_LOONGSON2] = "ICT Loongson-2",
};
-Index: linux-2.6.23.17/arch/mips/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/Makefile
-+++ linux-2.6.23.17/arch/mips/Makefile
-@@ -533,6 +533,18 @@ libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mip
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -533,6 +533,18 @@
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
-Index: linux-2.6.23.17/arch/mips/mm/tlbex.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/tlbex.c
-+++ linux-2.6.23.17/arch/mips/mm/tlbex.c
-@@ -895,6 +895,8 @@ static __init void build_tlb_write_entry
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -895,6 +895,8 @@
case CPU_AU1550:
case CPU_AU1200:
case CPU_PR4450:
i_nop(p);
tlbw(p);
break;
-Index: linux-2.6.23.17/drivers/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/Kconfig
-+++ linux-2.6.23.17/drivers/Kconfig
-@@ -60,6 +60,8 @@ source "drivers/power/Kconfig"
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -60,6 +60,8 @@
source "drivers/hwmon/Kconfig"
source "drivers/mfd/Kconfig"
source "drivers/media/Kconfig"
-Index: linux-2.6.23.17/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.23.17/include/asm-mips/bootinfo.h
+--- a/include/asm-mips/bootinfo.h
++++ b/include/asm-mips/bootinfo.h
@@ -208,6 +208,12 @@
#define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
#define MACH_WRPPMC 1
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);
-Index: linux-2.6.23.17/include/asm-mips/cpu.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/cpu.h
-+++ linux-2.6.23.17/include/asm-mips/cpu.h
+--- a/include/asm-mips/cpu.h
++++ b/include/asm-mips/cpu.h
@@ -106,6 +106,13 @@
#define PRID_IMP_SR71000 0x0400
/*
* ISA Level encodings
-Index: linux-2.6.23.17/drivers/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/Makefile
-+++ linux-2.6.23.17/drivers/Makefile
-@@ -90,3 +90,4 @@ obj-$(CONFIG_HID) += hid/
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -89,3 +89,5 @@
+ obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
- obj-$(CONFIG_GPIO_DEVICE) += gpio/
+obj-$(CONFIG_SSB) += ssb/
-Index: linux-2.6.23.17/include/linux/pci_ids.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/pci_ids.h
-+++ linux-2.6.23.17/include/linux/pci_ids.h
++
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
@@ -1980,6 +1980,7 @@
#define PCI_DEVICE_ID_TIGON3_5906M 0x1713
#define PCI_DEVICE_ID_BCM4401 0x4401
-Index: linux-2.6.23.17/drivers/mtd/maps/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.23.17/drivers/mtd/maps/Kconfig
-@@ -352,6 +352,12 @@ config MTD_CFI_FLAGADM
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -352,6 +352,12 @@
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
depends on MTD_JEDECPROBE && WALNUT
-Index: linux-2.6.23.17/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.23.17/drivers/mtd/maps/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_PNC2000) += pnc2000.o
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -33,6 +33,7 @@
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
-Index: linux-2.6.23.17/drivers/net/b44.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/b44.c
-+++ linux-2.6.23.17/drivers/net/b44.c
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
@@ -1,7 +1,9 @@
-/* b44.c: Broadcom 4400 device driver.
+/* b44.c: Broadcom 4400/47xx device driver.
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
-@@ -96,18 +100,11 @@ static int b44_debug = -1; /* -1 == use
+@@ -96,18 +100,11 @@
module_param(b44_debug, int, 0);
MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
static void b44_halt(struct b44 *);
static void b44_init_rings(struct b44 *);
-@@ -119,6 +116,7 @@ static void b44_init_hw(struct b44 *, in
+@@ -119,6 +116,7 @@
static int dma_desc_align_mask;
static int dma_desc_sync_size;
static const char b44_gstrings[][ETH_GSTRING_LEN] = {
#define _B44(x...) # x,
-@@ -126,35 +124,24 @@ B44_STAT_REG_DECLARE
+@@ -126,35 +124,24 @@
#undef _B44
};
}
static int b44_wait_bit(struct b44 *bp, unsigned long reg,
-@@ -182,117 +169,29 @@ static int b44_wait_bit(struct b44 *bp,
+@@ -182,117 +169,29 @@
return 0;
}
{
u32 val;
-@@ -328,14 +227,14 @@ static void b44_enable_ints(struct b44 *
+@@ -328,14 +227,14 @@
bw32(bp, B44_IMASK, bp->imask);
}
(reg << MDIO_DATA_RA_SHIFT) |
(MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -344,18 +243,34 @@ static int b44_readphy(struct b44 *bp, i
+@@ -344,18 +243,34 @@
return err;
}
/* miilib interface */
/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
* due to code existing before miilib use was added to this driver.
-@@ -384,6 +299,8 @@ static int b44_phy_reset(struct b44 *bp)
+@@ -384,6 +299,8 @@
u32 val;
int err;
err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
if (err)
return err;
-@@ -442,11 +359,27 @@ static void b44_set_flow_ctrl(struct b44
+@@ -442,11 +359,27 @@
__b44_set_flow_ctrl(bp, pause_enab);
}
if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
goto out;
if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -542,6 +475,19 @@ static void b44_check_phy(struct b44 *bp
+@@ -542,6 +475,19 @@
{
u32 bmsr, aux;
if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
!b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
(bmsr != 0xffff)) {
-@@ -617,10 +563,10 @@ static void b44_tx(struct b44 *bp)
+@@ -617,10 +563,10 @@
BUG_ON(skb == NULL);
rp->skb = NULL;
dev_kfree_skb_irq(skb);
}
-@@ -657,9 +603,9 @@ static int b44_alloc_rx_skb(struct b44 *
+@@ -657,9 +603,9 @@
if (skb == NULL)
return -ENOMEM;
/* Hardware bug work-around, the chip is unable to do PCI DMA
to/from anything above 1GB :-( */
-@@ -667,18 +613,18 @@ static int b44_alloc_rx_skb(struct b44 *
+@@ -667,18 +613,18 @@
mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
/* Sigh... */
if (!dma_mapping_error(mapping))
dev_kfree_skb_any(skb);
return -ENOMEM;
}
-@@ -705,9 +651,9 @@ static int b44_alloc_rx_skb(struct b44 *
+@@ -705,9 +651,9 @@
dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
if (bp->flags & B44_FLAG_RX_RING_HACK)
return RX_PKT_BUF_SZ;
}
-@@ -734,9 +680,9 @@ static void b44_recycle_rx(struct b44 *b
+@@ -734,9 +680,9 @@
pci_unmap_addr(src_map, mapping));
if (bp->flags & B44_FLAG_RX_RING_HACK)
ctrl = src_desc->ctrl;
if (dest_idx == (B44_RX_RING_SIZE - 1))
-@@ -750,13 +696,13 @@ static void b44_recycle_rx(struct b44 *b
+@@ -750,13 +696,13 @@
src_map->skb = NULL;
if (bp->flags & B44_FLAG_RX_RING_HACK)
}
static int b44_rx(struct b44 *bp, int budget)
-@@ -776,9 +722,9 @@ static int b44_rx(struct b44 *bp, int bu
+@@ -776,9 +722,9 @@
struct rx_header *rh;
u16 len;
rh = (struct rx_header *) skb->data;
len = le16_to_cpu(rh->len);
if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
-@@ -810,8 +756,8 @@ static int b44_rx(struct b44 *bp, int bu
+@@ -810,8 +756,8 @@
skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
if (skb_size < 0)
goto drop_it;
/* Leave out rx_header */
skb_put(skb, len + RX_PKT_OFFSET);
skb_pull(skb, RX_PKT_OFFSET);
-@@ -982,24 +928,24 @@ static int b44_start_xmit(struct sk_buff
+@@ -982,24 +928,24 @@
goto err_out;
}
dev_kfree_skb_any(bounce_skb);
goto err_out;
}
-@@ -1022,9 +968,9 @@ static int b44_start_xmit(struct sk_buff
+@@ -1022,9 +968,9 @@
bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
if (bp->flags & B44_FLAG_TX_RING_HACK)
entry = NEXT_TX(entry);
-@@ -1097,10 +1043,10 @@ static void b44_free_rings(struct b44 *b
+@@ -1097,10 +1043,10 @@
if (rp->skb == NULL)
continue;
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
}
-@@ -1111,10 +1057,10 @@ static void b44_free_rings(struct b44 *b
+@@ -1111,10 +1057,10 @@
if (rp->skb == NULL)
continue;
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
}
-@@ -1136,14 +1082,14 @@ static void b44_init_rings(struct b44 *b
+@@ -1136,14 +1082,14 @@
memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
if (bp->flags & B44_FLAG_RX_RING_HACK)
for (i = 0; i < bp->rx_pending; i++) {
if (b44_alloc_rx_skb(bp, -1, i) < 0)
-@@ -1163,24 +1109,24 @@ static void b44_free_consistent(struct b
+@@ -1163,24 +1109,24 @@
bp->tx_buffers = NULL;
if (bp->rx_ring) {
if (bp->flags & B44_FLAG_RX_RING_HACK) {
bp->tx_ring, bp->tx_ring_dma);
bp->tx_ring = NULL;
bp->flags &= ~B44_FLAG_TX_RING_HACK;
-@@ -1206,7 +1152,7 @@ static int b44_alloc_consistent(struct b
+@@ -1206,7 +1152,7 @@
goto out_err;
size = DMA_TABLE_BYTES;
if (!bp->rx_ring) {
/* Allocation may have failed due to pci_alloc_consistent
insisting on use of GFP_DMA, which is more restrictive
-@@ -1218,9 +1164,9 @@ static int b44_alloc_consistent(struct b
+@@ -1218,9 +1164,9 @@
if (!rx_ring)
goto out_err;
if (dma_mapping_error(rx_ring_dma) ||
rx_ring_dma + size > DMA_30BIT_MASK) {
-@@ -1233,9 +1179,9 @@ static int b44_alloc_consistent(struct b
+@@ -1233,9 +1179,9 @@
bp->flags |= B44_FLAG_RX_RING_HACK;
}
insisting on use of GFP_DMA, which is more restrictive
than necessary... */
struct dma_desc *tx_ring;
-@@ -1245,9 +1191,9 @@ static int b44_alloc_consistent(struct b
+@@ -1245,9 +1191,9 @@
if (!tx_ring)
goto out_err;
if (dma_mapping_error(tx_ring_dma) ||
tx_ring_dma + size > DMA_30BIT_MASK) {
-@@ -1282,7 +1228,9 @@ static void b44_clear_stats(struct b44 *
+@@ -1282,7 +1228,9 @@
/* bp->lock is held. */
static void b44_chip_reset(struct b44 *bp)
{
bw32(bp, B44_RCV_LAZY, 0);
bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
-@@ -1294,19 +1242,24 @@ static void b44_chip_reset(struct b44 *b
+@@ -1294,19 +1242,24 @@
}
bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
br32(bp, B44_MDIO_CTRL);
if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-@@ -1349,6 +1302,7 @@ static int b44_set_mac_addr(struct net_d
+@@ -1349,6 +1302,7 @@
{
struct b44 *bp = netdev_priv(dev);
struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
-@@ -1359,7 +1313,11 @@ static int b44_set_mac_addr(struct net_d
+@@ -1359,7 +1313,11 @@
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
spin_lock_irq(&bp->lock);
spin_unlock_irq(&bp->lock);
return 0;
-@@ -1445,18 +1403,6 @@ out:
+@@ -1445,18 +1403,6 @@
return err;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling receive - used by netconsole and other diagnostic tools
-@@ -1570,7 +1516,6 @@ static void b44_setup_pseudo_magicp(stru
+@@ -1570,7 +1516,6 @@
static void b44_setup_wol(struct b44 *bp)
{
u32 val;
bw32(bp, B44_RXCONFIG, RXCONFIG_ALLMULTI);
-@@ -1594,13 +1539,6 @@ static void b44_setup_wol(struct b44 *bp
+@@ -1594,13 +1539,6 @@
} else {
b44_setup_pseudo_magicp(bp);
}
}
static int b44_close(struct net_device *dev)
-@@ -1700,7 +1638,7 @@ static void __b44_set_rx_mode(struct net
+@@ -1700,7 +1638,7 @@
val = br32(bp, B44_RXCONFIG);
val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
val |= RXCONFIG_PROMISC;
bw32(bp, B44_RXCONFIG, val);
} else {
-@@ -1747,12 +1685,8 @@ static void b44_set_msglevel(struct net_
+@@ -1747,12 +1685,8 @@
static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
{
}
static int b44_nway_reset(struct net_device *dev)
-@@ -2035,6 +1969,245 @@ static const struct ethtool_ops b44_etht
+@@ -2035,6 +1969,245 @@
.get_ethtool_stats = b44_get_ethtool_stats,
};
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
-@@ -2044,40 +2217,64 @@ static int b44_ioctl(struct net_device *
+@@ -2044,40 +2217,64 @@
if (!netif_running(dev))
goto out;
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
-@@ -2086,103 +2283,52 @@ static int __devinit b44_get_invariants(
+@@ -2086,103 +2283,52 @@
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
bp->rx_pending = B44_DEF_RX_RING_PENDING;
bp->tx_pending = B44_DEF_TX_RING_PENDING;
-@@ -2201,16 +2347,16 @@ static int __devinit b44_init_one(struct
+@@ -2201,16 +2347,16 @@
dev->poll_controller = b44_poll_controller;
#endif
dev->change_mtu = b44_change_mtu;
}
bp->mii_if.dev = dev;
-@@ -2229,61 +2375,52 @@ static int __devinit b44_init_one(struct
+@@ -2229,61 +2375,52 @@
err = register_netdev(dev);
if (err) {
del_timer_sync(&bp->timer);
-@@ -2301,33 +2438,22 @@ static int b44_suspend(struct pci_dev *p
+@@ -2301,33 +2438,22 @@
b44_init_hw(bp, B44_PARTIAL_RESET);
b44_setup_wol(bp);
}
return rc;
}
-@@ -2346,29 +2472,31 @@ static int b44_resume(struct pci_dev *pd
+@@ -2346,29 +2472,31 @@
return 0;
}
}
module_init(b44_init);
-Index: linux-2.6.23.17/drivers/net/b44.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/b44.h
-+++ linux-2.6.23.17/drivers/net/b44.h
+--- a/drivers/net/b44.h
++++ b/drivers/net/b44.h
@@ -129,6 +129,7 @@
#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
/* 4400 PHY registers */
#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
-@@ -346,10 +281,12 @@ struct rx_header {
+@@ -346,10 +281,12 @@
struct ring_info {
struct sk_buff *skb;
#define B44_STAT_REG_DECLARE \
_B44(tx_good_octets) \
-@@ -425,9 +362,10 @@ struct b44 {
+@@ -425,9 +362,10 @@
u32 dma_offset;
u32 flags;
#define B44_FLAG_PAUSE_AUTO 0x00008000
#define B44_FLAG_FULL_DUPLEX 0x00010000
#define B44_FLAG_100_BASE_T 0x00020000
-@@ -450,8 +388,7 @@ struct b44 {
+@@ -450,8 +388,7 @@
struct net_device_stats stats;
struct b44_hw_stats hw_stats;
struct net_device *dev;
dma_addr_t rx_ring_dma, tx_ring_dma;
-Index: linux-2.6.23.17/drivers/net/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/Kconfig
-+++ linux-2.6.23.17/drivers/net/Kconfig
-@@ -1577,7 +1577,7 @@ config APRICOT
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1577,7 +1577,7 @@
config B44
tristate "Broadcom 4400 ethernet support"
-Index: linux-2.6.23.17/drivers/net/b44.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/b44.c
-+++ linux-2.6.23.17/drivers/net/b44.c
-@@ -2273,6 +2273,10 @@ static int __devinit b44_get_invariants(
+--- a/drivers/net/b44.c
++++ b/drivers/net/b44.c
+@@ -2273,6 +2273,10 @@
bp->phy_addr = sdev->bus->sprom.et1phyaddr;
break;
}
-Index: linux-2.6.23.17/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/Kconfig
-+++ linux-2.6.23.17/arch/mips/Kconfig
-@@ -192,7 +192,6 @@ config MIPS_MALTA
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -192,7 +192,6 @@
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
select PCI_GT64XXX_PCI0
select MIPS_MSC
select SWAP_IO_SPACE
-@@ -1281,13 +1280,6 @@ config IP22_CPU_SCACHE
+@@ -1281,13 +1280,6 @@
bool
select BOARD_SCACHE
config R5000_CPU_SCACHE
bool
select BOARD_SCACHE
-Index: linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/cpu-probe.c
-+++ linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-@@ -701,6 +701,8 @@ static inline void cpu_probe_mips(struct
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -701,6 +701,8 @@
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
-Index: linux-2.6.23.17/arch/mips/mm/c-r4k.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/c-r4k.c
-+++ linux-2.6.23.17/arch/mips/mm/c-r4k.c
-@@ -1101,7 +1101,6 @@ static void __init loongson2_sc_init(voi
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -1101,7 +1101,6 @@
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
static void __init setup_scache(void)
{
-@@ -1155,29 +1154,17 @@ static void __init setup_scache(void)
+@@ -1155,29 +1154,17 @@
#endif
default:
/* compute a couple of other cache variables */
c->scache.waysize = scache_size / c->scache.ways;
-Index: linux-2.6.23.17/arch/mips/mm/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/Makefile
-+++ linux-2.6.23.17/arch/mips/mm/Makefile
-@@ -31,6 +31,5 @@ obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-
+--- a/arch/mips/mm/Makefile
++++ b/arch/mips/mm/Makefile
+@@ -31,6 +31,5 @@
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
-Index: linux-2.6.23.17/arch/mips/kernel/genex.S
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/genex.S
-+++ linux-2.6.23.17/arch/mips/kernel/genex.S
-@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp)
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -51,6 +51,10 @@
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
-Index: linux-2.6.23.17/arch/mips/mm/c-r4k.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/c-r4k.c
-+++ linux-2.6.23.17/arch/mips/mm/c-r4k.c
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
@@ -30,6 +30,9 @@
#include <asm/cacheflush.h> /* for run_uncached() */
/*
* Special Variant of smp_call_function for use by cache functions:
*
-@@ -94,6 +97,9 @@ static void __init r4k_blast_dcache_page
+@@ -94,6 +97,9 @@
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -108,6 +114,9 @@ static void __init r4k_blast_dcache_page
+@@ -108,6 +114,9 @@
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -122,6 +131,9 @@ static void __init r4k_blast_dcache_setu
+@@ -122,6 +131,9 @@
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
-@@ -638,6 +650,8 @@ static void local_r4k_flush_cache_sigtra
+@@ -638,6 +650,8 @@
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
-@@ -1213,6 +1227,17 @@ static void __init coherency_setup(void)
+@@ -1213,6 +1227,17 @@
* silly idea of putting something else there ...
*/
switch (current_cpu_data.cputype) {
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
-@@ -1243,6 +1268,15 @@ void __init r4k_cache_init(void)
+@@ -1243,6 +1268,15 @@
/* Default cache error handler for R4000 and R5000 family */
set_uncached_handler (0x100, &except_vec2_generic, 0x80);
probe_pcache();
setup_scache();
-@@ -1288,5 +1322,13 @@ void __init r4k_cache_init(void)
+@@ -1288,5 +1322,13 @@
build_clear_page();
build_copy_page();
local_r4k___flush_cache_all(NULL);
coherency_setup();
+#endif
}
-Index: linux-2.6.23.17/arch/mips/mm/tlbex.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/tlbex.c
-+++ linux-2.6.23.17/arch/mips/mm/tlbex.c
-@@ -1273,6 +1273,9 @@ static void __init build_r4000_tlb_refil
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -1273,6 +1273,9 @@
/* No need for i_nop */
}
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
-@@ -1708,6 +1711,9 @@ build_r4000_tlbchange_handler_head(u32 *
+@@ -1708,6 +1711,9 @@
struct reloc **r, unsigned int pte,
unsigned int ptr)
{
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else
-Index: linux-2.6.23.17/include/asm-mips/r4kcache.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/r4kcache.h
-+++ linux-2.6.23.17/include/asm-mips/r4kcache.h
+--- a/include/asm-mips/r4kcache.h
++++ b/include/asm-mips/r4kcache.h
@@ -17,6 +17,20 @@
#include <asm/cpu-features.h>
#include <asm/mipsmtregs.h>
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
-@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+@@ -150,6 +164,7 @@
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
-@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+@@ -169,6 +184,7 @@
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
-@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+@@ -176,6 +192,7 @@
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
-@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+@@ -208,6 +225,7 @@
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
protected_cache_op(Hit_Invalidate_I, addr);
}
-@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+@@ -219,6 +237,7 @@
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
-@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+@@ -339,8 +358,52 @@
: "r" (base), \
"i" (op));
static inline void blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
-@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+@@ -352,6 +415,7 @@
\
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws,indexop); \
-@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+@@ -366,6 +430,7 @@
\
__##pfx##flush_prologue \
\
do { \
cache##lsize##_unroll32(start,hitop); \
start += lsize * 32; \
-@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+@@ -384,6 +449,8 @@
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -393,28 +460,30 @@ static inline void blast_##pfx##cache##l
+@@ -393,28 +460,30 @@
__##pfx##flush_epilogue \
}
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
-@@ -424,13 +493,13 @@ static inline void prot##blast_##pfx##ca
+@@ -424,13 +493,13 @@
__##pfx##flush_epilogue \
}
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
#endif /* _ASM_R4KCACHE_H */
-Index: linux-2.6.23.17/include/asm-mips/stackframe.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/stackframe.h
-+++ linux-2.6.23.17/include/asm-mips/stackframe.h
+--- a/include/asm-mips/stackframe.h
++++ b/include/asm-mips/stackframe.h
@@ -350,6 +350,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
-Index: linux-2.6.23.17/arch/mips/mm/init.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/init.c
-+++ linux-2.6.23.17/arch/mips/mm/init.c
-@@ -211,7 +211,7 @@ void copy_user_highpage(struct page *to,
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -211,7 +211,7 @@
void *vfrom, *vto;
vto = kmap_atomic(to, KM_USER1);
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent();
-@@ -234,7 +234,7 @@ void copy_to_user_page(struct vm_area_st
+@@ -234,7 +234,7 @@
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent();
-@@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_
+@@ -250,7 +250,7 @@
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
void *vfrom =
kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
-Index: linux-2.6.23.17/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
++++ b/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+#define cpu_use_kmap_coherent 0
+
+#endif /* __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H */
-Index: linux-2.6.23.17/include/asm-mips/cpu-features.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/cpu-features.h
-+++ linux-2.6.23.17/include/asm-mips/cpu-features.h
+--- a/include/asm-mips/cpu-features.h
++++ b/include/asm-mips/cpu-features.h
@@ -101,6 +101,9 @@
#ifndef cpu_has_pindexed_dcache
#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
-Index: linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/kernel/cpu-probe.c
-+++ linux-2.6.23.17/arch/mips/kernel/cpu-probe.c
-@@ -159,6 +159,7 @@ static inline void check_wait(void)
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -159,6 +159,7 @@
case CPU_5KC:
case CPU_25KF:
case CPU_PR4450:
-Index: linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_chipcommon.c
-+++ linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-@@ -270,6 +270,8 @@ void ssb_chipco_resume(struct ssb_chipco
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -270,6 +270,8 @@
void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-@@ -293,6 +295,8 @@ void ssb_chipco_get_clockcpu(struct ssb_
+@@ -293,6 +295,8 @@
void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
u32 *plltype, u32 *n, u32 *m)
{
*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
switch (*plltype) {
-Index: linux-2.6.23.17/drivers/ssb/driver_mipscore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_mipscore.c
-+++ linux-2.6.23.17/drivers/ssb/driver_mipscore.c
-@@ -161,6 +161,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -161,6 +161,8 @@
if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
rate = 200000000;
} else {
rate = ssb_calc_clock_rate(pll_type, n, m);
}
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -862,6 +862,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -862,6 +862,8 @@
if (bus->chip_id == 0x5365) {
rate = 100000000;
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
-Index: linux-2.6.23.17/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.23.17/drivers/usb/host/Kconfig
-@@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -154,6 +154,19 @@
Enables support for PCI-bus plug-in USB controller cards.
If unsure, say Y.
config USB_OHCI_BIG_ENDIAN_DESC
bool
depends on USB_OHCI_HCD
-Index: linux-2.6.23.17/drivers/usb/host/ohci-hcd.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/usb/host/ohci-hcd.c
-+++ linux-2.6.23.17/drivers/usb/host/ohci-hcd.c
-@@ -926,11 +926,17 @@ MODULE_LICENSE ("GPL");
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -926,11 +926,17 @@
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
#endif
#error "missing bus glue for ohci-hcd"
#endif
-@@ -975,10 +981,20 @@ static int __init ohci_hcd_mod_init(void
+@@ -975,10 +981,20 @@
goto error_pci;
#endif
error_pci:
#endif
#ifdef SA1111_DRIVER
-@@ -1003,6 +1019,9 @@ module_init(ohci_hcd_mod_init);
+@@ -1003,6 +1019,9 @@
static void __exit ohci_hcd_mod_exit(void)
{
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
#endif
-Index: linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
@@ -0,0 +1,247 @@
+/*
+ * Sonics Silicon Backplane
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
-Index: linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/usb/host/ohci-ssb.c
-+++ linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-@@ -117,8 +117,10 @@ static const struct hc_driver ssb_ohci_h
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -117,8 +117,10 @@
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
.hub_irq_enable = ohci_rhsc_enable,
-Index: linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/usb/host/ohci-ssb.c
-+++ linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-@@ -142,10 +142,59 @@ static int ssb_ohci_attach(struct ssb_de
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -142,10 +142,59 @@
int err = -ENOMEM;
u32 tmp, flags = 0;
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev->dev->bus_id);
-@@ -235,6 +284,7 @@ static int ssb_ohci_resume(struct ssb_de
+@@ -235,6 +284,7 @@
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-Index: linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/usb/host/ohci-ssb.c
-+++ linux-2.6.23.17/drivers/usb/host/ohci-ssb.c
-@@ -195,6 +195,11 @@ static int ssb_ohci_attach(struct ssb_de
+--- a/drivers/usb/host/ohci-ssb.c
++++ b/drivers/usb/host/ohci-ssb.c
+@@ -195,6 +195,11 @@
else
ssb_device_enable(dev, 0);
-Index: linux-2.6.23.17/include/asm-mips/cacheflush.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/cacheflush.h
-+++ linux-2.6.23.17/include/asm-mips/cacheflush.h
+--- a/include/asm-mips/cacheflush.h
++++ b/include/asm-mips/cacheflush.h
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
-Index: linux-2.6.23.17/arch/mips/mm/init.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/mm/init.c
-+++ linux-2.6.23.17/arch/mips/mm/init.c
-@@ -205,31 +205,6 @@ void kunmap_coherent(void)
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -205,31 +205,6 @@
preempt_check_resched();
}
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
-Index: linux-2.6.23.17/include/asm-mips/page.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-mips/page.h
-+++ linux-2.6.23.17/include/asm-mips/page.h
+--- a/include/asm-mips/page.h
++++ b/include/asm-mips/page.h
@@ -35,6 +35,7 @@
#ifndef __ASSEMBLY__
#include <asm/io.h>
/*
-@@ -67,13 +68,16 @@ static inline void clear_user_page(void
+@@ -67,13 +68,16 @@
flush_data_cache_page((unsigned long)addr);
}
-Index: linux-2.6.23.17/drivers/ide/pci/aec62xx.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ide/pci/aec62xx.c
-+++ linux-2.6.23.17/drivers/ide/pci/aec62xx.c
-@@ -248,7 +248,14 @@ static int __devinit init_setup_aec62xx(
+--- a/drivers/ide/pci/aec62xx.c
++++ b/drivers/ide/pci/aec62xx.c
+@@ -248,7 +248,14 @@
static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
{
if (inb(dma_base + 2) & 0x10) {
d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
-@@ -256,7 +263,11 @@ static int __devinit init_setup_aec6x80(
+@@ -256,7 +263,11 @@
d->udma_mask = 0x7f; /* udma0-6 */
}
-Index: linux-2.6.23.17/scripts/gen_initramfs_list.sh
-===================================================================
---- linux-2.6.23.17.orig/scripts/gen_initramfs_list.sh
-+++ linux-2.6.23.17/scripts/gen_initramfs_list.sh
-@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -287,7 +287,7 @@
if [ "${is_cpio_compressed}" = "compressed" ]; then
cat ${cpio_tfile} > ${output_file}
else
fi
[ -z ${cpio_file} ] && rm ${cpio_tfile}
fi
-Index: linux-2.6.23.17/init/initramfs.c
-===================================================================
---- linux-2.6.23.17.orig/init/initramfs.c
-+++ linux-2.6.23.17/init/initramfs.c
-@@ -441,6 +441,69 @@ static void __init flush_window(void)
+--- a/init/initramfs.c
++++ b/init/initramfs.c
+@@ -441,6 +441,69 @@
outcnt = 0;
}
static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
{
int written;
-@@ -475,12 +538,28 @@ static char * __init unpack_to_rootfs(ch
+@@ -475,12 +538,28 @@
inptr = 0;
outcnt = 0; /* bytes in output buffer */
bytes_out = 0;
-Index: linux-2.6.23.17/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_pcicore.c
-+++ linux-2.6.23.17/drivers/ssb/driver_pcicore.c
-@@ -66,6 +66,7 @@ int pcibios_plat_dev_init(struct pci_dev
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -66,6 +66,7 @@
base = &ssb_pcicore_pcibus_iobase;
else
base = &ssb_pcicore_pcibus_membase;
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
-@@ -88,10 +89,12 @@ int pcibios_plat_dev_init(struct pci_dev
+@@ -88,10 +89,12 @@
static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
{
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
-@@ -101,7 +104,10 @@ static void __init ssb_fixup_pcibridge(s
+@@ -101,7 +104,10 @@
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
/* Make sure our latency is high enough to handle the devices behind us */
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
-@@ -279,14 +285,14 @@ static struct resource ssb_pcicore_mem_r
+@@ -279,14 +285,14 @@
.name = "SSB PCIcore external memory",
.start = SSB_PCI_DMA,
.end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
};
static struct pci_controller ssb_pcicore_controller = {
-@@ -344,7 +350,8 @@ static void ssb_pcicore_init_hostmode(st
+@@ -344,7 +350,8 @@
/* Ok, ready to run, register it to the system.
* The following needs change, if we want to port hostmode
* to non-MIPS platform. */
However, the pcicore PCI-fixup routine fixes these collisions afterwards.
Remove this sanity check for now until we find a better solution.
--mb
-Index: linux-2.6.23.17/arch/mips/pci/pci.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/pci/pci.c
-+++ linux-2.6.23.17/arch/mips/pci/pci.c
-@@ -177,10 +177,8 @@ static int pcibios_enable_resources(stru
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -177,10 +177,8 @@
continue;
r = &dev->resource[idx];
-Index: linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_chipcommon.c
-+++ linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-@@ -403,6 +403,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -403,6 +403,7 @@
unsigned int irq;
u32 baud_base, div;
u32 i, n;
plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
irq = ssb_mips_irq(cc->dev);
-@@ -414,14 +415,39 @@ int ssb_chipco_serial_init(struct ssb_ch
+@@ -414,14 +415,39 @@
chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
div = 1;
} else {
/* Internal backplane clock */
baud_base = ssb_clockspeed(bus);
div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
-@@ -433,7 +459,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+@@ -433,7 +459,7 @@
}
/* Clock source depends on strapping if UartClkOverride is unset */
!(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
SSB_CHIPCO_CAP_UARTCLK_INT) {
-@@ -455,7 +481,7 @@ int ssb_chipco_serial_init(struct ssb_ch
+@@ -455,7 +481,7 @@
cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
/* Offset changed at after rev 0 */
uart_regs += (i * 8);
else
uart_regs += (i * 256);
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_chipcommon.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -51,9 +51,12 @@
#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
-Index: linux-2.6.23.17/drivers/ssb/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/Kconfig
-+++ linux-2.6.23.17/drivers/ssb/Kconfig
-@@ -105,6 +105,12 @@ config SSB_DRIVER_MIPS
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -105,6 +105,12 @@
If unsure, say N
config SSB_DRIVER_EXTIF
bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
depends on SSB_DRIVER_MIPS && EXPERIMENTAL
-Index: linux-2.6.23.17/drivers/ssb/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/Makefile
-+++ linux-2.6.23.17/drivers/ssb/Makefile
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
@@ -1,5 +1,6 @@
# core
ssb-y += main.o scan.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
-Index: linux-2.6.23.17/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_extif.c
-+++ linux-2.6.23.17/drivers/ssb/driver_extif.c
-@@ -37,6 +37,12 @@ static inline u32 extif_write32_masked(s
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -37,6 +37,12 @@
return value;
}
#ifdef CONFIG_SSB_SERIAL
static bool serial_exists(u8 *regs)
{
-Index: linux-2.6.23.17/drivers/ssb/embedded.c
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
@@ -0,0 +1,26 @@
+/*
+ * Sonics Silicon Backplane
+ }
+ return -ENODEV;
+}
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_chipcommon.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -360,6 +360,11 @@ struct ssb_chipcommon {
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -360,6 +360,11 @@
u16 fast_pwrup_delay;
};
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
#include <linux/pm.h>
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_extif.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_extif.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_extif.h
-@@ -178,6 +178,9 @@ u32 ssb_extif_gpio_outen(struct ssb_exti
+--- a/include/linux/ssb/ssb_driver_extif.h
++++ b/include/linux/ssb/ssb_driver_extif.h
+@@ -178,6 +178,9 @@
u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_extif_serial_init(struct ssb_extif *extif,
struct ssb_serial_port *ports);
-@@ -201,5 +204,11 @@ void ssb_extif_get_clockcontrol(struct s
+@@ -201,5 +204,11 @@
{
}
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
-Index: linux-2.6.23.17/include/linux/ssb/ssb_embedded.h
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/include/linux/ssb/ssb_embedded.h
++++ b/include/linux/ssb/ssb_embedded.h
@@ -0,0 +1,10 @@
+#ifndef LINUX_SSB_EMBEDDED_H_
+#define LINUX_SSB_EMBEDDED_H_
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -1163,7 +1163,9 @@ static int __init ssb_modinit(void)
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1163,7 +1163,9 @@
/* ssb must be initialized after PCI but before the ssb drivers.
* That means we must use some initcall between subsys_initcall
* and device_initcall. */
-Index: linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_chipcommon.c
-+++ linux-2.6.23.17/drivers/ssb/driver_chipcommon.c
-@@ -361,37 +361,31 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -361,37 +361,31 @@
{
return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
}
#ifdef CONFIG_SSB_SERIAL
int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-Index: linux-2.6.23.17/drivers/ssb/driver_extif.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_extif.c
-+++ linux-2.6.23.17/drivers/ssb/driver_extif.c
-@@ -122,30 +122,25 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -122,30 +122,25 @@
{
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
}
return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
}
-EXPORT_SYMBOL(ssb_extif_gpio_intmask);
-Index: linux-2.6.23.17/drivers/ssb/embedded.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/embedded.c
-+++ linux-2.6.23.17/drivers/ssb/embedded.c
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
@@ -11,6 +11,8 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
{
-@@ -24,3 +26,107 @@ int ssb_watchdog_timer_set(struct ssb_bu
+@@ -24,3 +26,107 @@
}
return -ENODEV;
}
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_polarity);
-Index: linux-2.6.23.17/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb.h
-@@ -283,6 +283,11 @@ struct ssb_bus {
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -283,6 +283,11 @@
/* Contents of the SPROM. */
struct ssb_sprom sprom;
/* Internal-only stuff follows. Do not touch. */
struct list_head list;
#ifdef CONFIG_SSB_DEBUG
-Index: linux-2.6.23.17/include/linux/ssb/ssb_embedded.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_embedded.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_embedded.h
+--- a/include/linux/ssb/ssb_embedded.h
++++ b/include/linux/ssb/ssb_embedded.h
@@ -7,4 +7,12 @@
extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+
#endif /* LINUX_SSB_EMBEDDED_H_ */
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -571,6 +571,9 @@ static int ssb_bus_register(struct ssb_b
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -571,6 +571,9 @@
spin_lock_init(&bus->bar_lock);
INIT_LIST_HEAD(&bus->list);
-Index: linux-2.6.23.17/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_pcicore.c
-+++ linux-2.6.23.17/drivers/ssb/driver_pcicore.c
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
@@ -11,6 +11,7 @@
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
#include "ssb_private.h"
-@@ -27,6 +28,18 @@ void pcicore_write32(struct ssb_pcicore
+@@ -27,6 +28,18 @@
ssb_write32(pc->dev, offset, value);
}
/**************************************************
* Code for hostmode operation.
**************************************************/
-@@ -123,8 +136,10 @@ static u32 get_cfgspace_addr(struct ssb_
+@@ -123,8 +136,10 @@
u32 addr = 0;
u32 tmp;
if (bus == 0) {
/* Type 0 transaction */
if (unlikely(dev >= SSB_PCI_SLOT_MAX))
-@@ -324,7 +339,16 @@ static void ssb_pcicore_init_hostmode(st
+@@ -324,7 +339,16 @@
pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
udelay(1); /* Assertion time demanded by the PCI standard */
/* 64MB I/O window */
pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -559,6 +559,7 @@ static int ssb_fetch_invariants(struct s
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -559,6 +559,7 @@
goto out;
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
out:
return err;
}
-Index: linux-2.6.23.17/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb.h
-@@ -282,6 +282,8 @@ struct ssb_bus {
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -282,6 +282,8 @@
struct ssb_boardinfo boardinfo;
/* Contents of the SPROM. */
struct ssb_sprom sprom;
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
-@@ -299,8 +301,13 @@ struct ssb_bus {
+@@ -299,8 +301,13 @@
/* The initialization-invariants. */
struct ssb_init_invariants {
};
/* Type of function to fetch the invariants. */
typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_pci.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_pci.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_pci.h
+--- a/include/linux/ssb/ssb_driver_pci.h
++++ b/include/linux/ssb/ssb_driver_pci.h
@@ -51,6 +51,11 @@
#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
Add support for 8bit reads/writes to SSB.
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -507,6 +507,14 @@ error:
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -507,6 +507,14 @@
return err;
}
static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
-@@ -523,6 +531,14 @@ static u32 ssb_ssb_read32(struct ssb_dev
+@@ -523,6 +531,14 @@
return readl(bus->mmio + offset);
}
static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
-@@ -541,8 +557,10 @@ static void ssb_ssb_write32(struct ssb_d
+@@ -541,8 +557,10 @@
/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
static const struct ssb_bus_ops ssb_ssb_ops = {
.write16 = ssb_ssb_write16,
.write32 = ssb_ssb_write32,
};
-Index: linux-2.6.23.17/drivers/ssb/pci.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/pci.c
-+++ linux-2.6.23.17/drivers/ssb/pci.c
-@@ -572,6 +572,19 @@ static inline int ssb_pci_assert_buspowe
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -572,6 +572,19 @@
}
#endif /* DEBUG */
static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
-@@ -598,6 +611,19 @@ static u32 ssb_pci_read32(struct ssb_dev
+@@ -598,6 +611,19 @@
return ioread32(bus->mmio + offset);
}
static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
-@@ -626,8 +652,10 @@ static void ssb_pci_write32(struct ssb_d
+@@ -626,8 +652,10 @@
/* Not "static", as it's used in main.c */
const struct ssb_bus_ops ssb_pci_ops = {
.write16 = ssb_pci_write16,
.write32 = ssb_pci_write32,
};
-Index: linux-2.6.23.17/drivers/ssb/pcmcia.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/pcmcia.c
-+++ linux-2.6.23.17/drivers/ssb/pcmcia.c
-@@ -172,6 +172,22 @@ static int select_core_and_segment(struc
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -172,6 +172,22 @@
return 0;
}
static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
-@@ -206,6 +222,20 @@ static u32 ssb_pcmcia_read32(struct ssb_
+@@ -206,6 +222,20 @@
return (lo | (hi << 16));
}
static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
-@@ -238,8 +268,10 @@ static void ssb_pcmcia_write32(struct ss
+@@ -238,8 +268,10 @@
/* Not "static", as it's used in main.c */
const struct ssb_bus_ops ssb_pcmcia_ops = {
.write16 = ssb_pcmcia_write16,
.write32 = ssb_pcmcia_write32,
};
-Index: linux-2.6.23.17/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb.h
-@@ -72,8 +72,10 @@ struct ssb_device;
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -72,8 +72,10 @@
/* Lowlevel read/write operations on the device MMIO.
* Internal, don't use that outside of ssb. */
struct ssb_bus_ops {
void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
};
-@@ -344,6 +346,10 @@ void ssb_device_disable(struct ssb_devic
+@@ -344,6 +346,10 @@
/* Device MMIO register read/write functions. */
static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
{
return dev->ops->read16(dev, offset);
-@@ -352,6 +358,10 @@ static inline u32 ssb_read32(struct ssb_
+@@ -352,6 +358,10 @@
{
return dev->ops->read32(dev, offset);
}
Allow registering PCI devices after early boot.
This is an ugly hack and needs to be rewritten before going upstream.
-Index: linux-2.6.23.17/arch/mips/pci/pci.c
-===================================================================
---- linux-2.6.23.17.orig/arch/mips/pci/pci.c
-+++ linux-2.6.23.17/arch/mips/pci/pci.c
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
@@ -21,6 +21,17 @@
*/
int pci_probe_only;
#define PCI_ASSIGN_ALL_BUSSES 1
unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
-@@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
+@@ -75,8 +86,32 @@
res->start = start;
}
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
goto out;
if (request_resource(&ioport_resource, hose->io_resource) < 0) {
-@@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
+@@ -84,9 +119,6 @@
goto out;
}
/*
* Do not panic here but later - this might hapen before console init.
*/
-@@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
+@@ -94,41 +126,47 @@
printk(KERN_WARNING
"registering PCI controller with io_map_base unset\n");
}
/* Scan all of the recorded PCI controllers. */
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-@@ -157,6 +195,7 @@ static int __init pcibios_init(void)
+@@ -157,6 +195,7 @@
if (!pci_probe_only)
pci_assign_unassigned_resources();
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
return 0;
}
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
-@@ -1185,9 +1185,7 @@ static int __init ssb_modinit(void)
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -1185,9 +1185,7 @@
/* ssb must be initialized after PCI but before the ssb drivers.
* That means we must use some initcall between subsys_initcall
* and device_initcall. */
-Index: linux-2.6.23.17/drivers/ssb/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/Kconfig
-+++ linux-2.6.23.17/drivers/ssb/Kconfig
-@@ -120,4 +120,13 @@ config SSB_DRIVER_EXTIF
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -120,4 +120,13 @@
If unsure, say N
+ If unsure, say N
+
endmenu
-Index: linux-2.6.23.17/drivers/ssb/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/Makefile
-+++ linux-2.6.23.17/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
+--- a/drivers/ssb/Makefile
++++ b/drivers/ssb/Makefile
+@@ -11,6 +11,7 @@
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
-Index: linux-2.6.23.17/drivers/ssb/driver_gige.c
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/drivers/ssb/driver_gige.c
++++ b/drivers/ssb/driver_gige.c
@@ -0,0 +1,294 @@
+/*
+ * Sonics Silicon Backplane
+{
+ return ssb_driver_register(&ssb_gige_driver);
+}
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_gige.h
-===================================================================
--- /dev/null
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,174 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
-Index: linux-2.6.23.17/drivers/ssb/driver_pcicore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_pcicore.c
-+++ linux-2.6.23.17/drivers/ssb/driver_pcicore.c
-@@ -60,74 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -60,74 +60,6 @@
/* Core to access the external PCI config space. Can only have one. */
static struct ssb_pcicore *extpci_core;
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
unsigned int bus, unsigned int dev,
-@@ -317,6 +249,92 @@ static struct pci_controller ssb_pcicore
+@@ -317,6 +249,92 @@
.mem_offset = 0x24000000,
};
static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
-Index: linux-2.6.23.17/drivers/ssb/embedded.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/embedded.c
-+++ linux-2.6.23.17/drivers/ssb/embedded.c
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
@@ -10,6 +10,9 @@
#include <linux/ssb/ssb.h>
#include "ssb_private.h"
-@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
+@@ -130,3 +133,90 @@
return res;
}
EXPORT_SYMBOL(ssb_gpio_polarity);
+
+ return -ENODEV;
+}
-Index: linux-2.6.23.17/include/linux/ssb/ssb.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb.h
-@@ -422,5 +422,12 @@ extern int ssb_bus_powerup(struct ssb_bu
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -422,5 +422,12 @@
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
-Index: linux-2.6.23.17/include/linux/ssb/ssb_driver_pci.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/ssb/ssb_driver_pci.h
-+++ linux-2.6.23.17/include/linux/ssb/ssb_driver_pci.h
+--- a/include/linux/ssb/ssb_driver_pci.h
++++ b/include/linux/ssb/ssb_driver_pci.h
@@ -1,6 +1,11 @@
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
-@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_
+@@ -88,6 +93,9 @@
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
#else /* CONFIG_SSB_DRIVER_PCICORE */
-@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+@@ -107,5 +115,16 @@
return 0;
}
+
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
-Index: linux-2.6.23.17/drivers/ssb/main.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/main.c
-+++ linux-2.6.23.17/drivers/ssb/main.c
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/ssb/ssb.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
-@@ -68,6 +69,25 @@ found:
+@@ -68,6 +69,25 @@
}
#endif /* CONFIG_SSB_PCIHOST */
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
if (dev)
-@@ -1175,7 +1195,14 @@ static int __init ssb_modinit(void)
+@@ -1175,7 +1195,14 @@
err = b43_pci_ssb_bridge_init();
if (err) {
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
/* don't fail SSB init because of this */
err = 0;
}
-@@ -1189,6 +1216,7 @@ fs_initcall(ssb_modinit);
+@@ -1189,6 +1216,7 @@
static void __exit ssb_modexit(void)
{
b43_pci_ssb_bridge_exit();
bus_unregister(&ssb_bustype);
}
-Index: linux-2.6.23.17/drivers/ssb/ssb_private.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/ssb_private.h
-+++ linux-2.6.23.17/drivers/ssb/ssb_private.h
-@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -118,6 +118,8 @@
extern int ssb_devices_freeze(struct ssb_bus *bus);
extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_PCIHOST
-Index: linux-2.6.23.17/drivers/net/tg3.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/tg3.c
-+++ linux-2.6.23.17/drivers/net/tg3.c
+--- a/drivers/net/tg3.c
++++ b/drivers/net/tg3.c
@@ -38,6 +38,7 @@
#include <linux/workqueue.h>
#include <linux/prefetch.h>
#include <net/checksum.h>
#include <net/ip.h>
-@@ -410,8 +411,9 @@ static void _tw32_flush(struct tg3 *tp,
+@@ -410,8 +411,9 @@
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
tp->read32_mbox(tp, off);
}
-@@ -623,7 +625,7 @@ static void tg3_switch_clocks(struct tg3
+@@ -623,7 +625,7 @@
#define PHY_BUSY_LOOPS 5000
{
u32 frame_val;
unsigned int loops;
-@@ -637,7 +639,7 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -637,7 +639,7 @@
*val = 0x0;
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -672,7 +674,12 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -672,7 +674,12 @@
return ret;
}
{
u32 frame_val;
unsigned int loops;
-@@ -688,7 +695,7 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -688,7 +695,7 @@
udelay(80);
}
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -721,6 +728,11 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -721,6 +728,11 @@
return ret;
}
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
{
u32 phy;
-@@ -1988,6 +2000,14 @@ static int tg3_setup_copper_phy(struct t
+@@ -1988,6 +2000,14 @@
tp->link_config.active_duplex = current_duplex;
}
if (current_link_up == 1 &&
(tp->link_config.active_duplex == DUPLEX_FULL) &&
(tp->link_config.autoneg == AUTONEG_ENABLE)) {
-@@ -4813,6 +4833,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+@@ -4813,6 +4833,11 @@
int i;
u32 val;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
-@@ -5040,6 +5065,14 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -5040,6 +5065,14 @@
tw32(0x5000, 0x400);
}
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -5308,9 +5341,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+@@ -5308,9 +5341,12 @@
return -ENODEV;
}
return 0;
}
-@@ -5391,6 +5427,11 @@ static int tg3_load_5701_a0_firmware_fix
+@@ -5391,6 +5427,11 @@
struct fw_info info;
int err, i;
info.text_base = TG3_FW_TEXT_ADDR;
info.text_len = TG3_FW_TEXT_LEN;
info.text_data = &tg3FwText[0];
-@@ -5949,6 +5990,11 @@ static int tg3_load_tso_firmware(struct
+@@ -5949,6 +5990,11 @@
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
return 0;
-@@ -6850,6 +6896,11 @@ static void tg3_timer(unsigned long __op
+@@ -6850,6 +6896,11 @@
spin_lock(&tp->lock);
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
-@@ -8432,6 +8483,11 @@ static int tg3_test_nvram(struct tg3 *tp
+@@ -8432,6 +8483,11 @@
u32 *buf, csum, magic;
int i, j, err = 0, size;
if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
return -EIO;
-@@ -9154,7 +9210,7 @@ static int tg3_ioctl(struct net_device *
+@@ -9154,7 +9210,7 @@
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
-@@ -9173,7 +9229,7 @@ static int tg3_ioctl(struct net_device *
+@@ -9173,7 +9229,7 @@
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
return err;
-@@ -9571,6 +9627,12 @@ static void __devinit tg3_get_5906_nvram
+@@ -9571,6 +9627,12 @@
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -9706,6 +9768,9 @@ static int tg3_nvram_read(struct tg3 *tp
+@@ -9706,6 +9768,9 @@
{
int ret;
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
-@@ -9938,6 +10003,9 @@ static int tg3_nvram_write_block(struct
+@@ -9938,6 +10003,9 @@
{
int ret;
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -10804,7 +10872,6 @@ static int __devinit tg3_get_invariants(
+@@ -10804,7 +10872,6 @@
tp->write32 = tg3_write_flush_reg32;
}
if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
-@@ -10840,6 +10907,11 @@ static int __devinit tg3_get_invariants(
+@@ -10840,6 +10907,11 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
-@@ -11184,6 +11256,10 @@ static int __devinit tg3_get_device_addr
+@@ -11184,6 +11256,10 @@
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC64
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
-@@ -11675,6 +11751,7 @@ static char * __devinit tg3_phy_string(s
+@@ -11675,6 +11751,7 @@
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
-@@ -11859,6 +11936,13 @@ static int __devinit tg3_init_one(struct
+@@ -11859,6 +11936,13 @@
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
-Index: linux-2.6.23.17/drivers/net/tg3.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/tg3.h
-+++ linux-2.6.23.17/drivers/net/tg3.h
-@@ -2279,6 +2279,10 @@ struct tg3 {
+--- a/drivers/net/tg3.h
++++ b/drivers/net/tg3.h
+@@ -2279,6 +2279,10 @@
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
struct timer_list timer;
u16 timer_counter;
-@@ -2333,6 +2337,7 @@ struct tg3 {
+@@ -2333,6 +2337,7 @@
#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM5755 0xbc050cc0
#define PHY_ID_BCM5787 0xbc050ce0
#define PHY_ID_BCM5756 0xbc050ed0
#define PHY_ID_BCM5906 0xdc00ac40
-@@ -2364,7 +2369,8 @@ struct tg3 {
+@@ -2364,7 +2369,8 @@
(X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
(X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
(X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
-Index: linux-2.6.23.17/drivers/ssb/driver_mipscore.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/ssb/driver_mipscore.c
-+++ linux-2.6.23.17/drivers/ssb/driver_mipscore.c
-@@ -212,6 +212,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -212,6 +212,7 @@
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
projects / openwrt / staging / mkresin.git / commitdiff