+++ /dev/null
-/*
- * Device Tree Source for Meraki MR24 (Ikarem)
- *
- * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
- *
- * Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apm82181.dtsi"
-
-/ {
- model = "Meraki MR24 Access Point";
- compatible = "meraki,mr24", "meraki,ikarem", "apm,bluestone";
-
- aliases {
- serial0 = &UART1;
- led-boot = &status;
- led-failsafe = &failsafe;
- led-running = &status;
- led-upgrade = &status;
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial@ef600400";
- };
-
-};
-
-
-&CRYPTO {
- status = "okay";
-};
-
-&PKA {
- status = "okay";
-};
-
-&TRNG {
- status = "okay";
-};
-
-&EBC0 {
- /* Ikarem has 32MB of NAND */
- ndfc@1,0 {
- status = "okay";
- /* 32 MiB NAND Flash */
- nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x00170000>;
- read-only;
- };
-
- partition@170000 {
- label = "oops";
- reg = <0x00170000 0x00010000>;
- };
-
- partition@180000 {
- label = "ubi";
- reg = <0x00180000 0x01e80000>;
- };
- };
- };
-};
-
-&UART1 {
- status = "okay";
-};
-
-&GPIO0 {
- status = "okay";
-};
-
-&IIC0 {
- status = "okay";
- /* Boot ROM is at 0x52-0x53, do not touch */
- /* Unknown chip at 0x6e, not sure what it is */
-};
-
-&EMAC0 {
- status = "okay";
-};
-
-&POB0 {
- gpio-leds {
- compatible = "gpio-leds";
-
- status: power-green {
- label = "mr24:green:power";
- gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
- };
-
- failsafe: power-orange {
- label = "mr24:orange:power";
- gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "mr24:green:wan";
- gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
- };
-
- ssi-0 {
- label = "mr24:green:wifi1";
- gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
- };
-
- ssi-1 {
- label = "mr24:green:wifi2";
- gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
- };
-
- ssi-2 {
- label = "mr24:green:wifi3";
- gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
- };
-
- ssi-3 {
- label = "mr24:green:wifi4";
- gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_keys_polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <60>; /* 3 * 20 = 60ms */
- autorepeat;
-
- button@1 {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&PCIE0 {
- status = "okay";
-};
-
-&MSI {
- status = "okay";
-};
+++ /dev/null
-/*
- * Device Tree Source for Meraki MX60/MX60W (Buckminster)
- *
- * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
- *
- * Based on Cisco Meraki DTS extracted from release wired-12-217818
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apm82181.dtsi"
-
-/ {
- model = "Meraki MX60/MX60W Security Appliance";
- compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
-
- aliases {
- serial0 = &UART1;
- led-boot = &status;
- led-failsafe = &failsafe;
- led-running = &status;
- led-upgrade = &status;
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial@ef600400";
- };
-
-};
-
-&CRYPTO {
- status = "okay";
-};
-
-&PKA {
- status = "okay";
-};
-
-&TRNG {
- status = "okay";
-};
-
-&USBOTG0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&EBC0 {
- /* Buckminster has 1GiB of NAND */
- ndfc@1,0 {
- status = "okay";
- nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
-
- partition@100000 {
- label = "u-boot-env";
- reg = <0x00100000 0x00100000>;
- read-only;
- };
-
- partition@200000 {
- label = "oops";
- reg = <0x00200000 0x00040000>;
- };
-
- partition@240000 {
- label = "ubi";
- reg = <0x00240000 0x3fdc0000>;
- };
-
- all {
- label = "all";
- reg = <0x00000000 0x40000000>;
- };
- };
- };
-};
-
-&UART1 {
- status = "okay";
-};
-
-&GPIO0 {
- status = "okay";
-};
-
-&IIC0 {
- status = "okay";
-};
-
-&EMAC0 {
- status = "okay";
- phy-handle = <&phy0>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
- reg = <0>;
- qca,ar8327-initvals = <
- 0x0010 0x40000000
- 0x0624 0x007f7f7f
- 0x0004 0x07a00000 /* PAD0_MODE */
- 0x000c 0x01000000 /* PAD6_MODE */
- 0x007c 0x0000007e /* PORT0_STATUS */
- >;
- };
- };
-};
-
-&POB0 {
- gpio-leds {
- compatible = "gpio-leds";
-
- status: power-green {
- label = "mx60:green:power";
- gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
- };
-
- failsafe: power-orange {
- label = "mx60:orange:power";
- gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
- };
-
- wan-green {
- label = "mx60:green:wan";
- gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
- };
-
- wan-orange {
- label = "mx60:orange:wan";
- gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "mx60:green:lan1";
- gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "mx60:green:lan2";
- gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "mx60:green:lan3";
- gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "mx60:green:lan4";
- gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_keys_polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <60>; /* 3 * 20 = 60ms */
- autorepeat;
-
- button@1 {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&PCIE0 {
- /* Leave this enabled as u-boot on the MX60 will disable it for us */
- status = "okay";
-};
-
-&MSI {
- status = "okay";
-};
+++ /dev/null
-/*
- * Device Tree Source for AMCC Canyonlands (460EX)
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apollo3g.dtsi"
-
-/ {
- compatible = "wd,mybooklive-duo", "amcc,apollo3g";
- model = "MyBook Live Duo";
-};
-
-&SATA0 {
- status = "okay";
-};
-
-&USBOTG0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&GPIO1 {
- enable-usb {
- status = "okay";
- };
-
- enable-port0 {
- status = "okay";
- };
-};
+++ /dev/null
-/*
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apollo3g.dtsi"
-
-/ {
- compatible = "wd,mybooklive", "amcc,apollo3g";
- model = "MyBook Live";
-};
--- /dev/null
+/*
+ * Device Tree Source for Meraki MR24 (Ikarem)
+ *
+ * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apm82181.dtsi"
+
+/ {
+ model = "Meraki MR24 Access Point";
+ compatible = "meraki,mr24", "meraki,ikarem", "apm,bluestone";
+
+ aliases {
+ serial0 = &UART1;
+ led-boot = &status;
+ led-failsafe = &failsafe;
+ led-running = &status;
+ led-upgrade = &status;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600400";
+ };
+
+};
+
+
+&CRYPTO {
+ status = "okay";
+};
+
+&PKA {
+ status = "okay";
+};
+
+&TRNG {
+ status = "okay";
+};
+
+&EBC0 {
+ /* Ikarem has 32MB of NAND */
+ ndfc@1,0 {
+ status = "okay";
+ /* 32 MiB NAND Flash */
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00170000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "oops";
+ reg = <0x00170000 0x00010000>;
+ };
+
+ partition@180000 {
+ label = "ubi";
+ reg = <0x00180000 0x01e80000>;
+ };
+ };
+ };
+};
+
+&UART1 {
+ status = "okay";
+};
+
+&GPIO0 {
+ status = "okay";
+};
+
+&IIC0 {
+ status = "okay";
+ /* Boot ROM is at 0x52-0x53, do not touch */
+ /* Unknown chip at 0x6e, not sure what it is */
+};
+
+&EMAC0 {
+ status = "okay";
+};
+
+&POB0 {
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status: power-green {
+ label = "mr24:green:power";
+ gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ failsafe: power-orange {
+ label = "mr24:orange:power";
+ gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "mr24:green:wan";
+ gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ ssi-0 {
+ label = "mr24:green:wifi1";
+ gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ ssi-1 {
+ label = "mr24:green:wifi2";
+ gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ ssi-2 {
+ label = "mr24:green:wifi3";
+ gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ ssi-3 {
+ label = "mr24:green:wifi4";
+ gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+ autorepeat;
+
+ button@1 {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&PCIE0 {
+ status = "okay";
+};
+
+&MSI {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for Meraki MX60/MX60W (Buckminster)
+ *
+ * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * Based on Cisco Meraki DTS extracted from release wired-12-217818
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apm82181.dtsi"
+
+/ {
+ model = "Meraki MX60/MX60W Security Appliance";
+ compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
+
+ aliases {
+ serial0 = &UART1;
+ led-boot = &status;
+ led-failsafe = &failsafe;
+ led-running = &status;
+ led-upgrade = &status;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600400";
+ };
+
+};
+
+&CRYPTO {
+ status = "okay";
+};
+
+&PKA {
+ status = "okay";
+};
+
+&TRNG {
+ status = "okay";
+};
+
+&USBOTG0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&EBC0 {
+ /* Buckminster has 1GiB of NAND */
+ ndfc@1,0 {
+ status = "okay";
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x00100000 0x00100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "oops";
+ reg = <0x00200000 0x00040000>;
+ };
+
+ partition@240000 {
+ label = "ubi";
+ reg = <0x00240000 0x3fdc0000>;
+ };
+
+ all {
+ label = "all";
+ reg = <0x00000000 0x40000000>;
+ };
+ };
+ };
+};
+
+&UART1 {
+ status = "okay";
+};
+
+&GPIO0 {
+ status = "okay";
+};
+
+&IIC0 {
+ status = "okay";
+};
+
+&EMAC0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x0010 0x40000000
+ 0x0624 0x007f7f7f
+ 0x0004 0x07a00000 /* PAD0_MODE */
+ 0x000c 0x01000000 /* PAD6_MODE */
+ 0x007c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+ };
+};
+
+&POB0 {
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status: power-green {
+ label = "mx60:green:power";
+ gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ failsafe: power-orange {
+ label = "mx60:orange:power";
+ gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-green {
+ label = "mx60:green:wan";
+ gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-orange {
+ label = "mx60:orange:wan";
+ gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "mx60:green:lan1";
+ gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "mx60:green:lan2";
+ gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3 {
+ label = "mx60:green:lan3";
+ gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ lan4 {
+ label = "mx60:green:lan4";
+ gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+ autorepeat;
+
+ button@1 {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&PCIE0 {
+ /* Leave this enabled as u-boot on the MX60 will disable it for us */
+ status = "okay";
+};
+
+&MSI {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for Netgear WNDR4700/WNDR4720 Series
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apm82181.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ model = "Netgear WNDR4700/WNDR4720 Series";
+ compatible = "netgear,wndr4700";
+
+ aliases {
+ serial0 = &UART0;
+ led-boot = &status;
+ led-failsafe = &failsafe;
+ led-running = &status;
+ led-upgrade = &status;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <10000>; /* milliseconds */
+ polling-delay = <20000>; /* milliseconds */
+
+ thermal-sensors = <&temp0 1>;
+
+ trips {
+ /*
+ * Once the thermal governers are a bit smarter
+ * and do hysteresis properly, we can disable
+ * the fan when the HDD and CPU has < 39 C.
+ */
+ cpu_alert0: cpu-alert0 {
+ temperature = <25000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_alert1: cpu-alert1 {
+ temperature = <27000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert2: cpu-alert2 {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert3: cpu-alert3 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert4: cpu-alert4 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert5: cpu-alert5 {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_alert6: cpu-alert6 {
+ temperature = <850000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT 0>;
+ };
+
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 87>;
+ };
+
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 88 100>;
+ };
+
+ map3 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&fan0 101 147>;
+ };
+
+ map4 {
+ trip = <&cpu_alert4>;
+ cooling-device = <&fan0 148 207>;
+ };
+
+ map5 {
+ trip = <&cpu_alert5>;
+ cooling-device = <&fan0 208 231>;
+ };
+
+ map6 {
+ trip = <&cpu_alert6>;
+ cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
+
+&CRYPTO {
+ status = "okay";
+};
+
+&PKA {
+ status = "okay";
+};
+
+&TRNG {
+ status = "okay";
+};
+
+&SATA1 {
+ status = "okay";
+};
+
+&USBOTG0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&EBC0 {
+ ndfc@1,0 {
+ status = "okay";
+ /* 128 MiB Nand Flash */
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0,0@0x00000000 {
+ label = "NAND 128MiB 3,3V 8-bit";
+ reg = <0x00000000 0x08000000>;
+ read-only;
+ };
+
+ partition0,1@0x00000000 {
+ label = "uboot";
+ reg = <0x00000000 0x00180000>;
+ read-only;
+ };
+
+ partition0,2@0x00180000 {
+ label = "device-tree";
+ reg = <0x00180000 0x00020000>;
+ };
+
+ partition0,3@0x001a0000 {
+ label = "kernel";
+ reg = <0x001a0000 0x001e0000>;
+ /*
+ * will also contain a fake/empty
+ * rootfs to fool Netgear's uboot
+ * rootfs integrety checks.
+ */
+ };
+
+ partition0,4@0x00380000 {
+ label = "ubi";
+ reg = <0x00380000 0x01660000>;
+ };
+
+ partition0,5@0x019e0000 {
+ label = "config";
+ reg = <0x019e0000 0x00080000>;
+ read-only;
+ };
+
+ partition0,6@0x01a60000 {
+ label = "pot";
+ reg = <0x01a60000 0x00080000>;
+ read-only;
+ };
+
+ partition0,7@0x01ae0000 {
+ label = "traffic_meter";
+ reg = <0x01ae0000 0x00300000>;
+ read-only;
+ };
+
+ partition0,8@0x01de0000 {
+ label = "language";
+ reg = <0x01de0000 0x001c0000>;
+ read-only;
+ };
+
+ partition0,9@0x01fa0000 {
+ label = "ecos";
+ reg = <0x01fa0000 0x06020000>;
+ read-only;
+ };
+
+ partition0,10@0x07fc0000 {
+ label = "wifi_data";
+ reg = <0x07fc0000 0x00040000>;
+ read-only;
+ };
+
+ partition0,11@0x00180000 {
+ label = "firmware";
+ reg = <0x00180000 0x01860000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&UART0 {
+ status = "okay";
+};
+
+&GPIO0 {
+ status = "okay";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&UIC1 0x14>,
+ <&UIC1 0x1e>,
+ <&UIC1 0x1f>,
+ <&UIC2 0x19>;
+};
+
+&IIC0 {
+ status = "okay";
+
+ fan0: fan@1b {
+ compatible = "microchip,tc654";
+ reg = <0x1b>;
+ cooling-min-level = <0>;
+ cooling-max-level = <255>;
+ #cooling-cells = <2>; /* min followed by max */
+
+ gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */
+ alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */
+ };
+
+ temp0: temp@4d {
+ compatible = "gmt,g781";
+ reg = <0x4d>;
+ #thermal-sensor-cells = <1>;
+
+ /*
+ * The LM90 has two sensors:
+ * temp0 -> internal to LM90
+ * temp1 -> external NTC near CPU
+ */
+ };
+};
+
+
+&EMAC0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x0010 0x40000000
+ 0x0624 0x007f7f7f
+ 0x0004 0x07a00000 /* PAD0_MODE */
+ 0x000c 0x01000000 /* PAD6_MODE */
+ 0x007c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+ };
+};
+
+&POB0 {
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ autorepeat;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ backup_hd {
+ label = "Backup HD button";
+ gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ rfkill {
+ label = "RFKILL button";
+ gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ wps {
+ label = "WPS button";
+ gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ sdcard {
+ label = "SDCard inserted";
+ gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status: power-green {
+ label = "wndr4700:green:power";
+ gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ failsafe: power-orange {
+ label = "wndr4700:orange:power";
+ gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "panic";
+ };
+
+ usb-blue {
+ label = "wndr4700:blue:usb";
+ gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ logo-white {
+ label = "wndr4700:white:logo";
+ gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan-yellow {
+ label = "wndr4700:yellow:wan";
+ gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan-green {
+ label = "wndr4700:green:wan";
+ gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ hd-green {
+ label = "wndr4700:green:hd";
+ gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ hd-red {
+ label = "wndr4700:red:hd";
+ gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan-blue {
+ label = "wndr4700:blue:wlan";
+ gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&PCIE0 {
+ status = "okay";
+};
+
+&MSI {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apollo3g.dtsi"
+
+/ {
+ compatible = "wd,mybooklive-duo", "amcc,apollo3g";
+ model = "MyBook Live Duo";
+};
+
+&SATA0 {
+ status = "okay";
+};
+
+&USBOTG0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&GPIO1 {
+ enable-usb {
+ status = "okay";
+ };
+
+ enable-port0 {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apollo3g.dtsi"
+
+/ {
+ compatible = "wd,mybooklive", "amcc,apollo3g";
+ model = "MyBook Live";
+};
+++ /dev/null
-/*
- * Device Tree Source for Netgear WNDR4700/WNDR4720 Series
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apm82181.dtsi"
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- model = "Netgear WNDR4700/WNDR4720 Series";
- compatible = "netgear,wndr4700";
-
- aliases {
- serial0 = &UART0;
- led-boot = &status;
- led-failsafe = &failsafe;
- led-running = &status;
- led-upgrade = &status;
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial@ef600300";
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <10000>; /* milliseconds */
- polling-delay = <20000>; /* milliseconds */
-
- thermal-sensors = <&temp0 1>;
-
- trips {
- /*
- * Once the thermal governers are a bit smarter
- * and do hysteresis properly, we can disable
- * the fan when the HDD and CPU has < 39 C.
- */
- cpu_alert0: cpu-alert0 {
- temperature = <25000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_alert1: cpu-alert1 {
- temperature = <27000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert2: cpu-alert2 {
- temperature = <65000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert3: cpu-alert3 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert4: cpu-alert4 {
- temperature = <75000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert5: cpu-alert5 {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert6: cpu-alert6 {
- temperature = <850000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_crit: cpu-crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&fan0 THERMAL_NO_LIMIT 0>;
- };
-
- map1 {
- trip = <&cpu_alert1>;
- cooling-device = <&fan0 1 87>;
- };
-
- map2 {
- trip = <&cpu_alert2>;
- cooling-device = <&fan0 88 100>;
- };
-
- map3 {
- trip = <&cpu_alert3>;
- cooling-device = <&fan0 101 147>;
- };
-
- map4 {
- trip = <&cpu_alert4>;
- cooling-device = <&fan0 148 207>;
- };
-
- map5 {
- trip = <&cpu_alert5>;
- cooling-device = <&fan0 208 231>;
- };
-
- map6 {
- trip = <&cpu_alert6>;
- cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-};
-
-&CRYPTO {
- status = "okay";
-};
-
-&PKA {
- status = "okay";
-};
-
-&TRNG {
- status = "okay";
-};
-
-&SATA1 {
- status = "okay";
-};
-
-&USBOTG0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&EBC0 {
- ndfc@1,0 {
- status = "okay";
- /* 128 MiB Nand Flash */
- nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0,0@0x00000000 {
- label = "NAND 128MiB 3,3V 8-bit";
- reg = <0x00000000 0x08000000>;
- read-only;
- };
-
- partition0,1@0x00000000 {
- label = "uboot";
- reg = <0x00000000 0x00180000>;
- read-only;
- };
-
- partition0,2@0x00180000 {
- label = "device-tree";
- reg = <0x00180000 0x00020000>;
- };
-
- partition0,3@0x001a0000 {
- label = "kernel";
- reg = <0x001a0000 0x001e0000>;
- /*
- * will also contain a fake/empty
- * rootfs to fool Netgear's uboot
- * rootfs integrety checks.
- */
- };
-
- partition0,4@0x00380000 {
- label = "ubi";
- reg = <0x00380000 0x01660000>;
- };
-
- partition0,5@0x019e0000 {
- label = "config";
- reg = <0x019e0000 0x00080000>;
- read-only;
- };
-
- partition0,6@0x01a60000 {
- label = "pot";
- reg = <0x01a60000 0x00080000>;
- read-only;
- };
-
- partition0,7@0x01ae0000 {
- label = "traffic_meter";
- reg = <0x01ae0000 0x00300000>;
- read-only;
- };
-
- partition0,8@0x01de0000 {
- label = "language";
- reg = <0x01de0000 0x001c0000>;
- read-only;
- };
-
- partition0,9@0x01fa0000 {
- label = "ecos";
- reg = <0x01fa0000 0x06020000>;
- read-only;
- };
-
- partition0,10@0x07fc0000 {
- label = "wifi_data";
- reg = <0x07fc0000 0x00040000>;
- read-only;
- };
-
- partition0,11@0x00180000 {
- label = "firmware";
- reg = <0x00180000 0x01860000>;
- read-only;
- };
- };
- };
-};
-
-&UART0 {
- status = "okay";
-};
-
-&GPIO0 {
- status = "okay";
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupts-extended = <&UIC1 0x14>,
- <&UIC1 0x1e>,
- <&UIC1 0x1f>,
- <&UIC2 0x19>;
-};
-
-&IIC0 {
- status = "okay";
-
- fan0: fan@1b {
- compatible = "microchip,tc654";
- reg = <0x1b>;
- cooling-min-level = <0>;
- cooling-max-level = <255>;
- #cooling-cells = <2>; /* min followed by max */
-
- gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */
- alarm-gpios = <&GPIO0 5 GPIO_ACTIVE_LOW>; /* fault */
- interrupt-parent = <&UIC3>;
- interrupts = <0x16 IRQ_TYPE_EDGE_FALLING>; /* fault */
- };
-
- temp0: temp@4d {
- compatible = "gmt,g781";
- reg = <0x4d>;
- #thermal-sensor-cells = <1>;
-
- /*
- * The LM90 has two sensors:
- * temp0 -> internal to LM90
- * temp1 -> external NTC near CPU
- */
- };
-};
-
-
-&EMAC0 {
- status = "okay";
- phy-handle = <&phy0>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
- reg = <0>;
- qca,ar8327-initvals = <
- 0x0010 0x40000000
- 0x0624 0x007f7f7f
- 0x0004 0x07a00000 /* PAD0_MODE */
- 0x000c 0x01000000 /* PAD6_MODE */
- 0x007c 0x0000007e /* PORT0_STATUS */
- >;
- };
- };
-};
-
-&POB0 {
- gpio_keys_polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <2>;
- autorepeat;
- poll-interval = <60>; /* 3 * 20 = 60ms */
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&UIC1>;
- interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
- };
-
- backup_hd {
- label = "Backup HD button";
- gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_0>;
- interrupt-parent = <&UIC1>;
- interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
- };
-
- rfkill {
- label = "RFKILL button";
- gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- interrupt-parent = <&UIC1>;
- interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
- };
-
- wps {
- label = "WPS button";
- gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- interrupt-parent = <&UIC2>;
- interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
- };
-
- sdcard {
- label = "SDCard inserted";
- gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- status: power-green {
- label = "wndr4700:green:power";
- gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>;
- };
-
- failsafe: power-orange {
- label = "wndr4700:orange:power";
- gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "panic";
- };
-
- usb-blue {
- label = "wndr4700:blue:usb";
- gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
- };
-
- logo-white {
- label = "wndr4700:white:logo";
- gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan-yellow {
- label = "wndr4700:yellow:wan";
- gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
- };
-
- wan-green {
- label = "wndr4700:green:wan";
- gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>;
- };
-
- hd-green {
- label = "wndr4700:green:hd";
- gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
- };
-
- hd-red {
- label = "wndr4700:red:hd";
- gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
- };
-
- wlan-blue {
- label = "wndr4700:blue:wlan";
- gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&PCIE0 {
- status = "okay";
-};
-
-&MSI {
- status = "okay";
-};
DEVICE_TITLE := Cisco Meraki MR24
DEVICE_PACKAGES := kmod-spi-gpio
BOARD_NAME := mr24
- DEVICE_DTS := MR24
+ DEVICE_DTS := meraki-mr24
BLOCKSIZE := 63k
IMAGES := sysupgrade.tar
DTB_SIZE := 64512
DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-ledtrig-usbport kmod-usb-dwc2 \
kmod-usb-storage block-mount
BOARD_NAME := mx60
- DEVICE_DTS := MX60
+ DEVICE_DTS := meraki-mx60
BLOCKSIZE := 63k
IMAGES := sysupgrade.tar
DTB_SIZE := 64512
kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \
partx-utils
BOARD_NAME := wndr4700
- DEVICE_DTS := wndr4700
+ DEVICE_DTS := netgear-wndr4700
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
define Device/MyBookLiveSingle
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live
- DEVICE_DTS := apollo3g
+ DEVICE_DTS := wd-mybooklive
endef
TARGET_DEVICES += MyBookLiveSingle
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live Duo
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
- DEVICE_DTS := apollo3g-duo
+ DEVICE_DTS := wd-mybooklive-duo
endef
TARGET_DEVICES += MyBookLiveDuo
projects / openwrt / staging / mkresin.git / commitdiff