ramips/dts: Add support for Archer C50

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts
new file mode 100644 (file)
index 0000000..4fc8ff4
--- /dev/null
+++ b/target/linux/ramips/dts/ArcherC50.dts
@@ -0,0 +1,156 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "TP-Link Archer C50";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               lan {
+                       label = "tp-link:blue:lan";
+                       gpios = <&gpio0 1 1>;
+               };
+
+               power {
+                       label = "tp-link:blue:power";
+                       gpios = <&gpio0 7 0>;
+               };
+
+               usb {
+                       label = "tp-link:blue:usb";
+                       gpios = <&gpio0 9 1>;
+               };
+
+               wlan5g {
+                       label = "tp-link:blue:wlan5g";
+                       gpios = <&gpio0 11 1>;
+               };
+
+               wlan2g {
+                       label = "tp-link:blue:wlan2g";
+                       gpios = <&gpio3 0 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0x198>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio0 2 1>;
+                       linux,code = <0xf7>;
+               };      };
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               linux,modalias = "m25p80", "mx25l6405d";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x20000>;
+                       read-only;
+               };
+
+               partition@20000 {
+                       label = "firmware";
+                       reg = <0x20000 0x7a0000>;
+               };
+
+               partition@7c0000 {
+                       label = "config";
+                       reg = <0x7c0000 0x10000>;
+               };
+
+               rom: partition@7d0000 {
+                       label = "rom";
+                       reg = <0x7d0000 0x10000>;
+               };
+
+               partition@7e0000 {
+                       label = "romfile";
+                       reg = <0x7e0000 0x10000>;
+               };
+
+               radio: partition@7f0000 {
+                       label = "radio";
+                       reg = <0x7f0000 0x10000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+               mtd-mac-address = <&rom 0xf100>;
+               mediatek,portmap = "wllll";
+       };
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&gsw {
+       mediatek,port4 = "ephy";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&radio 0>;
+};
+
+&pcie {
+       status = "okay";
+
+       pcie-bridge {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&radio 32768>;
+                       mediatek,2ghz = <0>;
+               };
+       };
+};