LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .121
LINUX_VERSION-4.9 = .111
-LINUX_VERSION-4.14 = .54
+LINUX_VERSION-4.14 = .59
LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.121 = 44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
LINUX_KERNEL_HASH-4.9.111 = 5966558959dc580f163766f3fdefd7e57c01b2b45d51202d00b3807c253759dd
-LINUX_KERNEL_HASH-4.14.54 = 451642ac28c539a91072f1fb83b1c061d6d44df870ddf5562400ade5e1c4b6c6
+LINUX_KERNEL_HASH-4.14.59 = 7ec633c661bba941239e340bb35391d356eda541fb4c323d07034d09d05b319b
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
+++ /dev/null
-From a728a196d253530f17da5c86dc7dfbe58c5f7094 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Fri, 25 Aug 2017 15:47:14 +0200
-Subject: [PATCH 01/25] crypto: crypto4xx - remove bad list_del
-
-alg entries are only added to the list, after the registration
-was successful. If the registration failed, it was never added
-to the list in the first place.
-
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1033,12 +1033,10 @@ int crypto4xx_register_alg(struct crypto
- break;
- }
-
-- if (rc) {
-- list_del(&alg->entry);
-+ if (rc)
- kfree(alg);
-- } else {
-+ else
- list_add_tail(&alg->entry, &sec_dev->alg_list);
-- }
- }
-
- return 0;
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -962,7 +962,7 @@ u32 crypto4xx_build_pd(struct crypto_asy
+@@ -964,7 +964,7 @@ u32 crypto4xx_build_pd(struct crypto_asy
sa->sa_command_1.bf.hash_crypto_offset = 0;
pd->pd_ctl.w = ctx->pd_ctl;
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1114,7 +1114,9 @@ struct crypto4xx_alg_common crypto4xx_al
+@@ -1116,7 +1116,9 @@ struct crypto4xx_alg_common crypto4xx_al
.cra_name = "cbc(aes)",
.cra_driver_name = "cbc-aes-ppc4xx",
.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -1079,7 +1079,6 @@ static void crypto4xx_bh_tasklet_cb(unsi
+@@ -1081,7 +1081,6 @@ static void crypto4xx_bh_tasklet_cb(unsi
pd->pd_ctl.bf.pe_done = 0;
crypto4xx_pd_done(core_dev->dev, tail);
crypto4xx_put_pd_to_pdr(core_dev->dev, tail);
#include <crypto/sha.h>
#include "crypto4xx_reg_def.h"
#include "crypto4xx_core.h"
-@@ -1133,6 +1134,103 @@ struct crypto4xx_alg_common crypto4xx_al
+@@ -1135,6 +1136,103 @@ struct crypto4xx_alg_common crypto4xx_al
}
}
}},
#include "crypto4xx_reg_def.h"
#include "crypto4xx_core.h"
#include "crypto4xx_sa.h"
-@@ -481,111 +482,44 @@ static inline struct ce_sd *crypto4xx_ge
+@@ -483,111 +484,44 @@ static inline struct ce_sd *crypto4xx_ge
return (struct ce_sd *)(dev->sdr + sizeof(struct ce_sd) * idx);
}
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -394,10 +394,9 @@ static u32 crypto4xx_build_sdr(struct cr
+@@ -396,10 +396,9 @@ static u32 crypto4xx_build_sdr(struct cr
if (!dev->sdr)
return -ENOMEM;
&dev->scatter_buffer_pa, GFP_ATOMIC);
if (!dev->scatter_buffer_va) {
dma_free_coherent(dev->core_dev->device,
-@@ -410,7 +409,7 @@ static u32 crypto4xx_build_sdr(struct cr
+@@ -412,7 +411,7 @@ static u32 crypto4xx_build_sdr(struct cr
for (i = 0; i < PPC4XX_NUM_SD; i++) {
sd_array[i].ptr = dev->scatter_buffer_pa +
}
return 0;
-@@ -425,7 +424,7 @@ static void crypto4xx_destroy_sdr(struct
+@@ -427,7 +426,7 @@ static void crypto4xx_destroy_sdr(struct
- if (dev->scatter_buffer_va != NULL)
+ if (dev->scatter_buffer_va)
dma_free_coherent(dev->core_dev->device,
- dev->scatter_buffer_size * PPC4XX_NUM_SD,
+ PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD,
+++ /dev/null
-From 5d59ad6eea82ef8df92b4109615a0dde9d8093e9 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Fri, 25 Aug 2017 15:47:24 +0200
-Subject: [PATCH 11/25] crypto: crypto4xx - fix crypto4xx_build_pdr,
- crypto4xx_build_sdr leak
-
-If one of the later memory allocations in rypto4xx_build_pdr()
-fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.
-
-crypto4xx_build_sdr() has the same issue with dev->sdr.
-
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -209,7 +209,7 @@ static u32 crypto4xx_build_pdr(struct cr
- dev->pdr_pa);
- return -ENOMEM;
- }
-- memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD);
-+ memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD);
- dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device,
- 256 * PPC4XX_NUM_PD,
- &dev->shadow_sa_pool_pa,
-@@ -242,13 +242,15 @@ static u32 crypto4xx_build_pdr(struct cr
-
- static void crypto4xx_destroy_pdr(struct crypto4xx_device *dev)
- {
-- if (dev->pdr != NULL)
-+ if (dev->pdr)
- dma_free_coherent(dev->core_dev->device,
- sizeof(struct ce_pd) * PPC4XX_NUM_PD,
- dev->pdr, dev->pdr_pa);
-+
- if (dev->shadow_sa_pool)
- dma_free_coherent(dev->core_dev->device, 256 * PPC4XX_NUM_PD,
- dev->shadow_sa_pool, dev->shadow_sa_pool_pa);
-+
- if (dev->shadow_sr_pool)
- dma_free_coherent(dev->core_dev->device,
- sizeof(struct sa_state_record) * PPC4XX_NUM_PD,
-@@ -417,12 +419,12 @@ static u32 crypto4xx_build_sdr(struct cr
-
- static void crypto4xx_destroy_sdr(struct crypto4xx_device *dev)
- {
-- if (dev->sdr != NULL)
-+ if (dev->sdr)
- dma_free_coherent(dev->core_dev->device,
- sizeof(struct ce_sd) * PPC4XX_NUM_SD,
- dev->sdr, dev->sdr_pa);
-
-- if (dev->scatter_buffer_va != NULL)
-+ if (dev->scatter_buffer_va)
- dma_free_coherent(dev->core_dev->device,
- PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD,
- dev->scatter_buffer_va,
-@@ -1223,7 +1225,7 @@ static int crypto4xx_probe(struct platfo
-
- rc = crypto4xx_build_gdr(core_dev->dev);
- if (rc)
-- goto err_build_gdr;
-+ goto err_build_pdr;
-
- rc = crypto4xx_build_sdr(core_dev->dev);
- if (rc)
-@@ -1266,12 +1268,11 @@ err_iomap:
- err_request_irq:
- irq_dispose_mapping(core_dev->irq);
- tasklet_kill(&core_dev->tasklet);
-- crypto4xx_destroy_sdr(core_dev->dev);
- err_build_sdr:
-+ crypto4xx_destroy_sdr(core_dev->dev);
- crypto4xx_destroy_gdr(core_dev->dev);
--err_build_gdr:
-- crypto4xx_destroy_pdr(core_dev->dev);
- err_build_pdr:
-+ crypto4xx_destroy_pdr(core_dev->dev);
- kfree(core_dev->dev);
- err_alloc_dev:
- kfree(core_dev);
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1850,6 +1850,7 @@ struct xhci_hcd {
+@@ -1854,6 +1854,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
+++ /dev/null
-From 54204ef3edbb1aa2390cabba61fe185a12cc39f0 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 08:35:44 +0100
-Subject: [PATCH 11/27] MIPS: ath79: fix register address in
- ath79_ddr_wb_flush()
-
-ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets
-need to be a multiple of 4.
-
-Cc: Alban Bedel <albeu@free.fr>
-Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/ath79/common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
-
- void ath79_ddr_wb_flush(u32 reg)
- {
-- void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
-+ void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4);
-
- /* Flush the DDR write buffer. */
- __raw_writel(0x1, flush_reg);
&sin->sin6_addr);
sin->sin6_scope_id = 0;
}
-@@ -833,12 +833,12 @@ int ip6_datagram_send_ctl(struct net *ne
+@@ -836,12 +836,12 @@ int ip6_datagram_send_ctl(struct net *ne
}
if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
return neigh_create(&arp_tbl, pkey, dev);
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
-@@ -449,48 +449,53 @@ static void tcp_options_write(__be32 *pt
+@@ -454,48 +454,53 @@ static void tcp_options_write(__be32 *pt
u16 options = opts->options; /* mungable copy */
if (unlikely(OPTION_MD5 & options)) {
}
if (unlikely(opts->num_sack_blocks)) {
-@@ -498,16 +503,17 @@ static void tcp_options_write(__be32 *pt
+@@ -503,16 +508,17 @@ static void tcp_options_write(__be32 *pt
tp->duplicate_sack : tp->selective_acks;
int this_sack;
}
tp->rx_opt.dsack = 0;
-@@ -520,13 +526,14 @@ static void tcp_options_write(__be32 *pt
+@@ -525,13 +531,14 @@ static void tcp_options_write(__be32 *pt
if (foc->exp) {
len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
EXPORT_SYMBOL(xfrm_parse_spi);
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
-@@ -3844,14 +3844,16 @@ static bool tcp_parse_aligned_timestamp(
+@@ -3854,14 +3854,16 @@ static bool tcp_parse_aligned_timestamp(
{
const __be32 *ptr = (const __be32 *)(th + 1);
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1831,6 +1831,7 @@ struct xhci_hcd {
+@@ -1835,6 +1835,7 @@ struct xhci_hcd {
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
#define XHCI_U2_DISABLE_WAKE (1 << 27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
-@@ -231,6 +232,33 @@ static struct fixed_phy_status bcm47xx_f
+@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
-@@ -250,6 +278,7 @@ static int __init bcm47xx_register_bus_c
+@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
+++ /dev/null
-From d0423d3e4fa7ae305729cb50369427f075ccb279 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 25 Feb 2017 12:41:28 +0100
-Subject: [PATCH 1/6] bcm63xx_enet: correct clock usage
-
-Check the return code of prepare_enable and change one last instance of
-enable only to prepare_enable. Also properly disable and release the
-clock in error paths and on remove for enetsw.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 +++++++++++++++++++++-------
- 1 file changed, 23 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1773,7 +1773,9 @@ static int bcm_enet_probe(struct platfor
- ret = PTR_ERR(priv->mac_clk);
- goto out;
- }
-- clk_prepare_enable(priv->mac_clk);
-+ ret = clk_prepare_enable(priv->mac_clk);
-+ if (ret)
-+ goto out_put_clk_mac;
-
- /* initialize default and fetch platform data */
- priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-@@ -1805,9 +1807,11 @@ static int bcm_enet_probe(struct platfor
- if (IS_ERR(priv->phy_clk)) {
- ret = PTR_ERR(priv->phy_clk);
- priv->phy_clk = NULL;
-- goto out_put_clk_mac;
-+ goto out_disable_clk_mac;
- }
-- clk_prepare_enable(priv->phy_clk);
-+ ret = clk_prepare_enable(priv->phy_clk);
-+ if (ret)
-+ goto out_put_clk_phy;
- }
-
- /* do minimal hardware init to be able to probe mii bus */
-@@ -1901,13 +1905,16 @@ out_free_mdio:
- out_uninit_hw:
- /* turn off mdc clock */
- enet_writel(priv, 0, ENET_MIISC_REG);
-- if (priv->phy_clk) {
-+ if (priv->phy_clk)
- clk_disable_unprepare(priv->phy_clk);
-+
-+out_put_clk_phy:
-+ if (priv->phy_clk)
- clk_put(priv->phy_clk);
-- }
-
--out_put_clk_mac:
-+out_disable_clk_mac:
- clk_disable_unprepare(priv->mac_clk);
-+out_put_clk_mac:
- clk_put(priv->mac_clk);
- out:
- free_netdev(dev);
-@@ -2752,7 +2759,9 @@ static int bcm_enetsw_probe(struct platf
- ret = PTR_ERR(priv->mac_clk);
- goto out_unmap;
- }
-- clk_enable(priv->mac_clk);
-+ ret = clk_prepare_enable(priv->mac_clk);
-+ if (ret)
-+ goto out_put_clk;
-
- priv->rx_chan = 0;
- priv->tx_chan = 1;
-@@ -2773,7 +2782,7 @@ static int bcm_enetsw_probe(struct platf
-
- ret = register_netdev(dev);
- if (ret)
-- goto out_put_clk;
-+ goto out_disable_clk;
-
- netif_carrier_off(dev);
- platform_set_drvdata(pdev, dev);
-@@ -2782,6 +2791,9 @@ static int bcm_enetsw_probe(struct platf
-
- return 0;
-
-+out_disable_clk:
-+ clk_disable_unprepare(priv->mac_clk);
-+
- out_put_clk:
- clk_put(priv->mac_clk);
-
-@@ -2813,6 +2825,9 @@ static int bcm_enetsw_remove(struct plat
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
-+ clk_disable_unprepare(priv->mac_clk);
-+ clk_put(priv->mac_clk);
-+
- free_netdev(dev);
- return 0;
- }
+++ /dev/null
-From 23d94cb855b6f4f0ee1c01679224472104ac6440 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 30 Sep 2017 14:10:18 +0200
-Subject: [PATCH 2/6] bcm63xx_enet: do not write to random DMA channel on
- BCM6345
-
-The DMA controller regs actually point to DMA channel 0, so the write to
-ENETDMA_CFG_REG will actually modify a random DMA channel.
-
-Since DMA controller registers do not exist on BCM6345, guard the write
-with the usual check for dma_has_sram.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1062,7 +1062,8 @@ static int bcm_enet_open(struct net_devi
- val = enet_readl(priv, ENET_CTL_REG);
- val |= ENET_CTL_ENABLE_MASK;
- enet_writel(priv, val, ENET_CTL_REG);
-- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+ if (priv->dma_has_sram)
-+ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
- enet_dmac_writel(priv, priv->dma_chan_en_mask,
- ENETDMAC_CHANCFG, priv->rx_chan);
-
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
-@@ -343,3 +343,28 @@
+@@ -358,3 +358,28 @@
* code
*/
#define uninitialized_var(x) x = x
* Before updating sk_refcnt, we must commit prior changes to memory
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
-@@ -1671,7 +1671,7 @@ u32 tcp_tso_autosize(const struct sock *
+@@ -1683,7 +1683,7 @@ u32 tcp_tso_autosize(const struct sock *
{
u32 bytes, segs;
sk->sk_gso_max_size - 1 - MAX_TCP_HEADER);
/* Goal is to send at least one packet per ms,
-@@ -2172,7 +2172,7 @@ static bool tcp_small_queue_check(struct
+@@ -2184,7 +2184,7 @@ static bool tcp_small_queue_check(struct
{
unsigned int limit;
/**
* dwc2_enable_host_interrupts() - Enables the Host mode interrupts
*
-@@ -3276,6 +3293,7 @@ static void dwc2_conn_id_status_change(s
+@@ -3278,6 +3295,7 @@ static void dwc2_conn_id_status_change(s
/* B-Device connector (Device Mode) */
if (gotgctl & GOTGCTL_CONID_B) {
/* Wait for switch to device mode */
dev_dbg(hsotg->dev, "connId B\n");
if (hsotg->bus_suspended) {
-@@ -4382,6 +4400,9 @@ static int _dwc2_hcd_start(struct usb_hc
+@@ -4384,6 +4402,9 @@ static int _dwc2_hcd_start(struct usb_hc
}
spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
-@@ -4409,6 +4430,8 @@ static void _dwc2_hcd_stop(struct usb_hc
+@@ -4411,6 +4432,8 @@ static void _dwc2_hcd_stop(struct usb_hc
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
spin_unlock_irqrestore(&hsotg->lock, flags);
usleep_range(1000, 3000);
}
-@@ -4445,6 +4468,7 @@ static int _dwc2_hcd_suspend(struct usb_
+@@ -4447,6 +4470,7 @@ static int _dwc2_hcd_suspend(struct usb_
hprt0 |= HPRT0_SUSP;
hprt0 &= ~HPRT0_PWR;
dwc2_writel(hprt0, hsotg->regs + HPRT0);
}
/* Enter hibernation */
-@@ -4525,6 +4549,8 @@ static int _dwc2_hcd_resume(struct usb_h
+@@ -4527,6 +4551,8 @@ static int _dwc2_hcd_resume(struct usb_h
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_port_resume(hsotg);
} else {
return regulator_enable(hsotg->vbus_supply);
}
-@@ -4401,9 +4406,7 @@ static int _dwc2_hcd_start(struct usb_hc
+@@ -4403,9 +4408,7 @@ static int _dwc2_hcd_start(struct usb_hc
spin_unlock_irqrestore(&hsotg->lock, flags);
+++ /dev/null
-From 9bbe60a67be5a1c6f79b3c9be5003481a50529ff Mon Sep 17 00:00:00 2001
-From: David Woodhouse <dwmw2@infradead.org>
-Date: Sat, 16 Jun 2018 11:55:44 +0100
-Subject: atm: Preserve value of skb->truesize when accounting to vcc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on
-which they are to be sent. But it doesn't take ownership of those
-packets from the sock (if any) which originally owned them. They should
-remain owned by their actual sender until they've left the box.
-
-There's a hack in pskb_expand_head() to avoid adjusting skb->truesize
-for certain skbs, precisely to avoid messing up sk_wmem_alloc
-accounting. Ideally that hack would cover the ATM use case too, but it
-doesn't — skbs which aren't owned by any sock, for example PPP control
-frames, still get their truesize adjusted when the low-level ATM driver
-adds headroom.
-
-This has always been an issue, it seems. The truesize of a packet
-increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't
-for normal traffic, only for control frames. So I think we just got away
-with it, and we probably needed to send 2GiB of LCP echo frames before
-the misaccounting would ever have caused a problem and caused
-atm_may_send() to start refusing packets.
-
-Commit 14afee4b609 ("net: convert sock.sk_wmem_alloc from atomic_t to
-refcount_t") did exactly what it was intended to do, and turned this
-mostly-theoretical problem into a real one, causing PPPoATM to fail
-immediately as sk_wmem_alloc underflows and atm_may_send() *immediately*
-starts refusing to allow new packets.
-
-The least intrusive solution to this problem is to stash the value of
-skb->truesize that was accounted to the VCC, in a new member of the
-ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that
-value instead of the then-current value of skb->truesize.
-
-Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()")
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/atmdev.h | 15 +++++++++++++++
- net/atm/br2684.c | 3 +--
- net/atm/clip.c | 3 +--
- net/atm/common.c | 3 +--
- net/atm/lec.c | 3 +--
- net/atm/mpc.c | 3 +--
- net/atm/pppoatm.c | 3 +--
- net/atm/raw.c | 4 ++--
- 8 files changed, 23 insertions(+), 14 deletions(-)
-
---- a/include/linux/atmdev.h
-+++ b/include/linux/atmdev.h
-@@ -214,6 +214,7 @@ struct atmphy_ops {
- struct atm_skb_data {
- struct atm_vcc *vcc; /* ATM VCC */
- unsigned long atm_options; /* ATM layer options */
-+ unsigned int acct_truesize; /* truesize accounted to vcc */
- };
-
- #define VCC_HTABLE_SIZE 32
-@@ -241,6 +242,20 @@ void vcc_insert_socket(struct sock *sk);
-
- void atm_dev_release_vccs(struct atm_dev *dev);
-
-+static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb)
-+{
-+ /*
-+ * Because ATM skbs may not belong to a sock (and we don't
-+ * necessarily want to), skb->truesize may be adjusted,
-+ * escaping the hack in pskb_expand_head() which avoids
-+ * doing so for some cases. So stash the value of truesize
-+ * at the time we accounted it, and atm_pop_raw() can use
-+ * that value later, in case it changes.
-+ */
-+ refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
-+ ATM_SKB(skb)->acct_truesize = skb->truesize;
-+ ATM_SKB(skb)->atm_options = vcc->atm_options;
-+}
-
- static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
- {
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -252,8 +252,7 @@ static int br2684_xmit_vcc(struct sk_buf
-
- ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
- pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
-- refcount_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
-- ATM_SKB(skb)->atm_options = atmvcc->atm_options;
-+ atm_account_tx(atmvcc, skb);
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
---- a/net/atm/clip.c
-+++ b/net/atm/clip.c
-@@ -381,8 +381,7 @@ static netdev_tx_t clip_start_xmit(struc
- memcpy(here, llc_oui, sizeof(llc_oui));
- ((__be16 *) here)[3] = skb->protocol;
- }
-- refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
-- ATM_SKB(skb)->atm_options = vcc->atm_options;
-+ atm_account_tx(vcc, skb);
- entry->vccs->last_use = jiffies;
- pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev);
- old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */
---- a/net/atm/common.c
-+++ b/net/atm/common.c
-@@ -630,10 +630,9 @@ int vcc_sendmsg(struct socket *sock, str
- goto out;
- }
- pr_debug("%d += %d\n", sk_wmem_alloc_get(sk), skb->truesize);
-- refcount_add(skb->truesize, &sk->sk_wmem_alloc);
-+ atm_account_tx(vcc, skb);
-
- skb->dev = NULL; /* for paths shared with net_device interfaces */
-- ATM_SKB(skb)->atm_options = vcc->atm_options;
- if (!copy_from_iter_full(skb_put(skb, size), size, &m->msg_iter)) {
- kfree_skb(skb);
- error = -EFAULT;
---- a/net/atm/lec.c
-+++ b/net/atm/lec.c
-@@ -182,9 +182,8 @@ lec_send(struct atm_vcc *vcc, struct sk_
- struct net_device *dev = skb->dev;
-
- ATM_SKB(skb)->vcc = vcc;
-- ATM_SKB(skb)->atm_options = vcc->atm_options;
-+ atm_account_tx(vcc, skb);
-
-- refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
- if (vcc->send(vcc, skb) < 0) {
- dev->stats.tx_dropped++;
- return;
---- a/net/atm/mpc.c
-+++ b/net/atm/mpc.c
-@@ -555,8 +555,7 @@ static int send_via_shortcut(struct sk_b
- sizeof(struct llc_snap_hdr));
- }
-
-- refcount_add(skb->truesize, &sk_atm(entry->shortcut)->sk_wmem_alloc);
-- ATM_SKB(skb)->atm_options = entry->shortcut->atm_options;
-+ atm_account_tx(entry->shortcut, skb);
- entry->shortcut->send(entry->shortcut, skb);
- entry->packets_fwded++;
- mpc->in_ops->put(entry);
---- a/net/atm/pppoatm.c
-+++ b/net/atm/pppoatm.c
-@@ -350,8 +350,7 @@ static int pppoatm_send(struct ppp_chann
- return 1;
- }
-
-- refcount_add(skb->truesize, &sk_atm(ATM_SKB(skb)->vcc)->sk_wmem_alloc);
-- ATM_SKB(skb)->atm_options = ATM_SKB(skb)->vcc->atm_options;
-+ atm_account_tx(vcc, skb);
- pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n",
- skb, ATM_SKB(skb)->vcc, ATM_SKB(skb)->vcc->dev);
- ret = ATM_SKB(skb)->vcc->send(ATM_SKB(skb)->vcc, skb)
---- a/net/atm/raw.c
-+++ b/net/atm/raw.c
-@@ -35,8 +35,8 @@ static void atm_pop_raw(struct atm_vcc *
- struct sock *sk = sk_atm(vcc);
-
- pr_debug("(%d) %d -= %d\n",
-- vcc->vci, sk_wmem_alloc_get(sk), skb->truesize);
-- WARN_ON(refcount_sub_and_test(skb->truesize, &sk->sk_wmem_alloc));
-+ vcc->vci, sk_wmem_alloc_get(sk), ATM_SKB(skb)->acct_truesize);
-+ WARN_ON(refcount_sub_and_test(ATM_SKB(skb)->acct_truesize, &sk->sk_wmem_alloc));
- dev_kfree_skb_any(skb);
- sk->sk_write_space(sk);
- }
static struct pernet_operations nfnl_log_net_ops = {
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
-@@ -1512,10 +1512,15 @@ static int __net_init nfnl_queue_net_ini
+@@ -1515,10 +1515,15 @@ static int __net_init nfnl_queue_net_ini
static void __net_exit nfnl_queue_net_exit(struct net *net)
{
--- /dev/null
+From 5012284700775a4e6e3fbe7eac4c543c4874b559 Mon Sep 17 00:00:00 2001
+From: Theodore Ts'o <tytso@mit.edu>
+Date: Sat, 28 Jul 2018 08:12:04 -0400
+Subject: [PATCH] ext4: fix check to prevent initializing reserved inodes
+
+Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is
+valid" will complain if block group zero does not have the
+EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
+since a freshly created file system has this flag cleared. It gets
+almost immediately after the file system is mounted read-write --- but
+the following somewhat unlikely sequence will end up triggering a
+false positive report of a corrupted file system:
+
+ mkfs.ext4 /dev/vdc
+ mount -o ro /dev/vdc /vdc
+ mount -o remount,rw /dev/vdc
+
+Instead, when initializing the inode table for block group zero, test
+to make sure that itable_unused count is not too large, since that is
+the case that will result in some or all of the reserved inodes
+getting cleared.
+
+This fixes the failures reported by Eric Whiteney when running
+generic/230 and generic/231 in the the nojournal test case.
+
+Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid")
+Reported-by: Eric Whitney <enwlinux@gmail.com>
+Signed-off-by: Theodore Ts'o <tytso@mit.edu>
+---
+ fs/ext4/ialloc.c | 5 ++++-
+ fs/ext4/super.c | 8 +-------
+ 2 files changed, 5 insertions(+), 8 deletions(-)
+
+--- a/fs/ext4/ialloc.c
++++ b/fs/ext4/ialloc.c
+@@ -1394,7 +1394,10 @@ int ext4_init_inode_table(struct super_b
+ ext4_itable_unused_count(sb, gdp)),
+ sbi->s_inodes_per_block);
+
+- if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group)) {
++ if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group) ||
++ ((group == 0) && ((EXT4_INODES_PER_GROUP(sb) -
++ ext4_itable_unused_count(sb, gdp)) <
++ EXT4_FIRST_INO(sb)))) {
+ ext4_error(sb, "Something is wrong with group %u: "
+ "used itable blocks: %d; "
+ "itable unused count: %u",
+--- a/fs/ext4/super.c
++++ b/fs/ext4/super.c
+@@ -3103,14 +3103,8 @@ static ext4_group_t ext4_has_uninit_itab
+ if (!gdp)
+ continue;
+
+- if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED))
+- continue;
+- if (group != 0)
++ if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)))
+ break;
+- ext4_error(sb, "Inode table for bg 0 marked as "
+- "needing zeroing");
+- if (sb_rdonly(sb))
+- return ngroups;
+ }
+
+ return group;
--- a/Makefile
+++ b/Makefile
-@@ -1227,7 +1227,6 @@ all: modules
+@@ -1228,7 +1228,6 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-@@ -1256,7 +1255,6 @@ _modinst_:
+@@ -1257,7 +1256,6 @@ _modinst_:
rm -f $(MODLIB)/build ; \
ln -s $(CURDIR) $(MODLIB)/build ; \
fi
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
-@@ -97,4 +97,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$
+@@ -98,4 +98,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$
###
## HOSTCC C flags
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -781,11 +786,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
+@@ -782,11 +787,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
endif
}
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
-@@ -1946,10 +1946,12 @@ void __init init_mm_internals(void)
+@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void)
start_shepherd_timer();
#endif
#ifdef CONFIG_PROC_FS
drivers/w1/masters/w1-gpio.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
-diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
-index a90728ceec5a..7b80762941af 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
-@@ -112,17 +112,16 @@ static int w1_gpio_probe_dt(struct platform_device *pdev)
+@@ -112,17 +112,16 @@ static int w1_gpio_probe_dt(struct platf
static int w1_gpio_probe(struct platform_device *pdev)
{
struct w1_bus_master *master;
if (!pdata) {
dev_err(&pdev->dev, "No configuration data\n");
return -ENXIO;
---
-2.14.1
-
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
-@@ -357,6 +357,8 @@ static inline int is_sp_move_ins(union m
+@@ -358,6 +358,8 @@ static inline int is_sp_move_ins(union m
if (ip->i_format.opcode == addiu_op ||
ip->i_format.opcode == daddiu_op) {
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
-@@ -238,7 +238,8 @@ static int br_handle_local_finish(struct
+@@ -239,7 +239,8 @@ static int br_handle_local_finish(struct
{
struct net_bridge_port *p = br_port_get_rcu(skb->dev);
BR_INPUT_SKB_CB(skb)->brdev = p->br->dev;
br_pass_frame_up(skb);
-@@ -326,6 +327,15 @@ rx_handler_result_t br_handle_frame(stru
+@@ -327,6 +328,15 @@ rx_handler_result_t br_handle_frame(stru
forward:
switch (p->state) {
+++ /dev/null
-From 028c9191bdf88f120f65626920a6a679170fcc3e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= <a.seppala@gmail.com>
-Date: Thu, 5 Jul 2018 11:37:03 +0300
-Subject: [PATCH 1/2] usb: dwc2: Fix DMA alignment to start at allocated
- boundary
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more
-supported way") introduced a common way to align DMA allocations.
-The code in the commit aligns the struct dma_aligned_buffer but the
-actual DMA address pointed by data[0] gets aligned to an offset from
-the allocated boundary by the kmalloc_ptr and the old_xfer_buffer
-pointers.
-
-This is against the recommendation in Documentation/DMA-API.txt which
-states:
-
- Therefore, it is recommended that driver writers who don't take
- special care to determine the cache line size at run time only map
- virtual regions that begin and end on page boundaries (which are
- guaranteed also to be cache line boundaries).
-
-The effect of this is that architectures with non-coherent DMA caches
-may run into memory corruption or kernel crashes with Unhandled
-kernel unaligned accesses exceptions.
-
-Fix the alignment by positioning the DMA area in front of the allocation
-and use memory at the end of the area for storing the orginal
-transfer_buffer pointer. This may have the added benefit of increased
-performance as the DMA area is now fully aligned on all architectures.
-
-Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM).
-
-Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more
-supported way")
-
-Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
----
- drivers/usb/dwc2/hcd.c | 44 +++++++++++++++++++++++---------------------
- 1 file changed, 23 insertions(+), 21 deletions(-)
-
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -2628,34 +2628,29 @@ static void dwc2_hc_init_xfer(struct dwc
-
- #define DWC2_USB_DMA_ALIGN 4
-
--struct dma_aligned_buffer {
-- void *kmalloc_ptr;
-- void *old_xfer_buffer;
-- u8 data[0];
--};
--
- static void dwc2_free_dma_aligned_buffer(struct urb *urb)
- {
-- struct dma_aligned_buffer *temp;
-+ void *stored_xfer_buffer;
-
- if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
- return;
-
-- temp = container_of(urb->transfer_buffer,
-- struct dma_aligned_buffer, data);
-+ /* Restore urb->transfer_buffer from the end of the allocated area */
-+ memcpy(&stored_xfer_buffer, urb->transfer_buffer +
-+ urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
-
- if (usb_urb_dir_in(urb))
-- memcpy(temp->old_xfer_buffer, temp->data,
-+ memcpy(stored_xfer_buffer, urb->transfer_buffer,
- urb->transfer_buffer_length);
-- urb->transfer_buffer = temp->old_xfer_buffer;
-- kfree(temp->kmalloc_ptr);
-+ kfree(urb->transfer_buffer);
-+ urb->transfer_buffer = stored_xfer_buffer;
-
- urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
- }
-
- static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
- {
-- struct dma_aligned_buffer *temp, *kmalloc_ptr;
-+ void *kmalloc_ptr;
- size_t kmalloc_size;
-
- if (urb->num_sgs || urb->sg ||
-@@ -2663,22 +2658,29 @@ static int dwc2_alloc_dma_aligned_buffer
- !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1)))
- return 0;
-
-- /* Allocate a buffer with enough padding for alignment */
-+ /*
-+ * Allocate a buffer with enough padding for original transfer_buffer
-+ * pointer. This allocation is guaranteed to be aligned properly for
-+ * DMA
-+ */
- kmalloc_size = urb->transfer_buffer_length +
-- sizeof(struct dma_aligned_buffer) + DWC2_USB_DMA_ALIGN - 1;
-+ sizeof(urb->transfer_buffer);
-
- kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
- if (!kmalloc_ptr)
- return -ENOMEM;
-
-- /* Position our struct dma_aligned_buffer such that data is aligned */
-- temp = PTR_ALIGN(kmalloc_ptr + 1, DWC2_USB_DMA_ALIGN) - 1;
-- temp->kmalloc_ptr = kmalloc_ptr;
-- temp->old_xfer_buffer = urb->transfer_buffer;
-+ /*
-+ * Position value of original urb->transfer_buffer pointer to the end
-+ * of allocation for later referencing
-+ */
-+ memcpy(kmalloc_ptr + urb->transfer_buffer_length,
-+ &urb->transfer_buffer, sizeof(urb->transfer_buffer));
-+
- if (usb_urb_dir_out(urb))
-- memcpy(temp->data, urb->transfer_buffer,
-+ memcpy(kmalloc_ptr, urb->transfer_buffer,
- urb->transfer_buffer_length);
-- urb->transfer_buffer = temp->data;
-+ urb->transfer_buffer = kmalloc_ptr;
-
- urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
-
--- a/Makefile
+++ b/Makefile
-@@ -645,12 +645,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
+@@ -646,12 +646,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
return -ENOMEM;
-@@ -817,6 +845,7 @@ copy_entries_to_user(unsigned int total_
+@@ -818,6 +846,7 @@ copy_entries_to_user(unsigned int total_
const struct xt_table_info *private = table->private;
int ret = 0;
const void *loc_cpu_entry;
counters = alloc_counters(table);
if (IS_ERR(counters))
-@@ -844,6 +873,14 @@ copy_entries_to_user(unsigned int total_
+@@ -845,6 +874,14 @@ copy_entries_to_user(unsigned int total_
goto free_counters;
}
for (i = sizeof(struct ipt_entry);
i < e->target_offset;
i += m->u.match_size) {
-@@ -1226,12 +1263,15 @@ compat_copy_entry_to_user(struct ipt_ent
+@@ -1227,12 +1264,15 @@ compat_copy_entry_to_user(struct ipt_ent
compat_uint_t origsize;
const struct xt_entry_match *ematch;
int ret = 0;
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
-@@ -3262,6 +3264,7 @@ static int packet_create(struct net *net
+@@ -3260,6 +3262,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
-@@ -3875,6 +3878,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3873,6 +3876,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
default:
return -ENOPROTOOPT;
}
-@@ -3927,6 +3940,13 @@ static int packet_getsockopt(struct sock
+@@ -3925,6 +3938,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
-@@ -5117,6 +5130,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
qc = __ata_qc_from_tag(ap, tag);
qc->tag = tag;
-@@ -6018,6 +6034,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
ata_sff_port_init(ap);
return ap;
-@@ -6039,6 +6058,12 @@ static void ata_host_release(struct devi
+@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
-@@ -6485,7 +6510,23 @@ int ata_host_register(struct ata_host *h
+@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
-@@ -889,6 +892,12 @@ struct ata_port {
+@@ -890,6 +893,12 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
+++ /dev/null
-The gen_stats facility will add a header for the toplevel nlattr of type
-TCA_STATS2 that contains all stats added by qdisc callbacks. A reference
-to this header is stored in the gnet_dump struct, and when all the
-per-qdisc callbacks have finished adding their stats, the length of the
-containing header will be adjusted to the right value.
-
-However, on architectures that need padding (i.e., that don't set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added
-before the stats, which means that the stored pointer will point to the
-padding, and so when the header is fixed up, the result is just a very
-big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS
-struct, this problem has been mostly invisible, but we exposed it with
-the netlink attribute-based statistics in CAKE.
-
-Fix the issue by fixing up the stored pointer if it points to a padding
-nlattr.
-
-Tested-by: Pete Heist <pete@heistp.net>
-Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
-Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
----
- net/core/gen_stats.c | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
---- a/net/core/gen_stats.c
-+++ b/net/core/gen_stats.c
-@@ -77,8 +77,20 @@ gnet_stats_start_copy_compat(struct sk_b
- d->lock = lock;
- spin_lock_bh(lock);
- }
-- if (d->tail)
-- return gnet_stats_copy(d, type, NULL, 0, padattr);
-+ if (d->tail) {
-+ int ret = gnet_stats_copy(d, type, NULL, 0, padattr);
-+
-+ /* The initial attribute added in gnet_stats_copy() may be
-+ * preceded by a padding attribute, in which case d->tail will
-+ * end up pointing at the padding instead of the real attribute.
-+ * Fix this so gnet_stats_finish_copy() adjusts the length of
-+ * the right attribute.
-+ */
-+ if (ret == 0 && d->tail->nla_type == padattr)
-+ d->tail = (struct nlattr *)((char *)d->tail +
-+ NLA_ALIGN(d->tail->nla_len));
-+ return ret;
-+ }
-
- return 0;
- }
drivers/soc/qcom/spm.c | 3 +++
1 file changed, 3 insertions(+)
-diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
-index f9d7a85b2822..53807e839664 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
-@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
cpumask_t mask;
bool use_scm_power_down = false;
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
---
-2.11.0
-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-index 98b9850ed2a0..3289b3a6c10e 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -316,7 +316,7 @@
+@@ -262,7 +262,7 @@
saw0: regulator@b089000 {
compatible = "qcom,saw2";
regulator;
};
---
-2.11.0
-
arch/arm/mach-qcom/Kconfig | 5 +++++
2 files changed, 6 insertions(+)
-Index: linux-4.14.54/arch/arm/Makefile
-===================================================================
---- linux-4.14.54.orig/arch/arm/Makefile
-+++ linux-4.14.54/arch/arm/Makefile
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ endif
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-Index: linux-4.14.54/arch/arm/mach-qcom/Kconfig
-===================================================================
---- linux-4.14.54.orig/arch/arm/mach-qcom/Kconfig
-+++ linux-4.14.54/arch/arm/mach-qcom/Kconfig
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
@@ -27,4 +27,9 @@ config ARCH_MDM9615
bool "Enable support for MDM9615"
select CLKSRC_QCOM
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-new file mode 100644
-index 000000000000..362877fcafed
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
@@ -0,0 +1,21 @@
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+};
---
-2.11.0
-
3 files changed, 196 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig
-===================================================================
---- linux-4.14.54.orig/drivers/phy/qualcomm/Kconfig
-+++ linux-4.14.54/drivers/phy/qualcomm/Kconfig
+--- a/drivers/phy/qualcomm/Kconfig
++++ b/drivers/phy/qualcomm/Kconfig
@@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA
depends on OF
select GENERIC_PHY
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
-Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-===================================================================
--- /dev/null
-+++ linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
++++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
-Index: linux-4.14.54/drivers/phy/qualcomm/Makefile
-===================================================================
---- linux-4.14.54.orig/drivers/phy/qualcomm/Makefile
-+++ linux-4.14.54/drivers/phy/qualcomm/Makefile
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
2 files changed, 94 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-index 418f9a022336..2ee5f05d5a43 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,5 +109,25 @@
+@@ -101,5 +101,25 @@
wifi@a800000 {
status = "ok";
};
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-index e5e52adbd5a3..e6b12129f0e4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -553,5 +553,79 @@
+@@ -410,5 +410,79 @@
"legacy";
status = "disabled";
};
+ };
};
};
---
-2.11.0
-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 156 ++++++++++++++++++++++++--
2 files changed, 146 insertions(+), 12 deletions(-)
-diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-index ef8d8c88ed7b..418f9a022336 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -69,7 +69,7 @@
+@@ -61,7 +61,7 @@
status = "ok";
};
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "ok";
-diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-index 2efc8a2d41a7..737097e9fb4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -40,8 +40,10 @@
- };
+@@ -24,8 +24,10 @@
+ interrupt-parent = <&intc>;
aliases {
- spi0 = &spi_0;
};
cpus {
-@@ -120,6 +122,12 @@
+@@ -132,6 +134,12 @@
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 2 0xf08>,
-@@ -165,13 +173,13 @@
+@@ -177,13 +185,13 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
-@@ -179,7 +187,7 @@
+@@ -191,7 +199,7 @@
status = "disabled";
};
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x78b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-@@ -188,10 +196,26 @@
+@@ -200,10 +208,26 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-@@ -200,14 +224,29 @@
+@@ -212,14 +236,29 @@
clock-names = "iface", "core";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
-@@ -275,7 +314,7 @@
- blsp1_uart1: serial@78af000 {
+@@ -293,7 +332,7 @@
+ serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
- interrupts = <0 107 0>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
-@@ -287,7 +326,7 @@
+@@ -305,7 +344,7 @@
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
-@@ -309,6 +348,101 @@
+@@ -327,6 +366,101 @@
reg = <0x4ab000 0x4>;
};
wifi0: wifi@a000000 {
compatible = "qcom,ipq4019-wifi";
reg = <0xa000000 0x200000>;
-@@ -342,7 +476,7 @@
+@@ -360,7 +494,7 @@
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
-@@ -384,7 +518,7 @@
+@@ -402,7 +536,7 @@
<GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
---
-2.11.0
-
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -359,7 +359,7 @@
+@@ -381,7 +381,7 @@
#size-cells = <2>;
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -166,6 +166,7 @@
+@@ -182,6 +182,7 @@
compatible = "qcom,ipq4019-pinctrl";
reg = <0x01000000 0x300000>;
gpio-controller;
drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
-diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c
-index 46cb256b4aa2..4ec43f7d2e52 100644
--- a/drivers/clk/qcom/gcc-ipq4019.c
+++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = {
+@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe
.reg = 0x2f020,
};
/*
* Round rate function for APSS CPU PLL Clock divider.
* It looks up the frequency table and returns the next higher frequency
-@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate,
+@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc
struct clk_hw *p_hw;
const struct freq_tbl *f;
if (!f)
return -EINVAL;
-@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate,
+@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c
u32 mask;
int ret;
struct clk_fepll *pll = to_clk_fepll(hw);
u32 cdiv, pre_div;
u64 rate;
-@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw,
+@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
do_div(rate, pre_div);
};
static const struct clk_ops clk_regmap_cpu_div_ops = {
---
-2.11.0
-
+ };
+
aliases {
- spi0 = &spi_0;
- spi1 = &spi_1;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp1_spi2;
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
-@@ -1184,6 +1184,9 @@ static void __init ubi_auto_attach(void)
+@@ -1187,6 +1187,9 @@ static void __init ubi_auto_attach(void)
mtd = open_mtd_device("ubi");
if (IS_ERR(mtd))
mtd = open_mtd_device("data");
+ if (IS_ERR(mtd))
+ mtd = open_mtd_device("UBI_DEV");
- if (!IS_ERR(mtd)) {
- size_t len;
+ if (IS_ERR(mtd))
+ return;
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -540,6 +540,34 @@
+@@ -562,6 +562,34 @@
status = "disabled";
};
+ };
+
usb3_ss_phy: ssphy@9a000 {
- compatible = "qca,uni-ssphy";
- reg = <0x9a000 0x800>;
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -568,6 +568,29 @@
+@@ -590,6 +590,29 @@
};
};
+ };
+
usb3_ss_phy: ssphy@9a000 {
- compatible = "qca,uni-ssphy";
- reg = <0x9a000 0x800>;
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
-Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
-===================================================================
---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -44,6 +44,8 @@
spi1 = &blsp1_spi2;
i2c0 = &blsp1_i2c3;
};
cpus {
-@@ -606,6 +608,64 @@
+@@ -613,6 +615,64 @@
status = "disabled";
};
-Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-===================================================================
---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -15,12 +15,39 @@
*/
usb3_ss_phy: ssphy@9a000 {
status = "ok";
};
-Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-===================================================================
---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,73 @@
/ {
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -185,18 +185,18 @@
+@@ -186,18 +186,18 @@
};
partition@a0000 {
reg = <0x400000 0x1C00000>;
};
};
-@@ -210,7 +210,7 @@
+@@ -211,7 +211,7 @@
};
ð0 {
+ status = "disabled";
ethernet0-port@0 {
speed = <1000>;
- duplex = <1>;
\ No newline at end of file
+ duplex = <1>;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1929,7 +1929,7 @@ static struct phy_driver genphy_driver =
+@@ -1926,7 +1926,7 @@ static struct phy_driver genphy_driver =
.config_init = genphy_config_init,
.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
SUPPORTED_AUI | SUPPORTED_FIBRE |
/* Set the HCD state before we enable the irqs */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1726,6 +1726,8 @@ struct xhci_hcd {
+@@ -1730,6 +1730,8 @@ struct xhci_hcd {
u8 max_interrupters;
u8 max_ports;
u8 isoc_threshold;
create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts
create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 3fec84fa0..e685ce9a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623n-rfb-nand.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
-diff --git a/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts
-new file mode 100644
-index 000000000..3b14eccd3
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts
@@ -0,0 +1,17 @@
+ reg = <0 0x80000000 0 0x20000000>;
+ };
+};
-diff --git a/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-new file mode 100644
-index 000000000..436b02f2d
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
@@ -0,0 +1,375 @@
+ status = "okay";
+};
+
---
-2.14.1
-
/* initialize internal qc */
/* XXX: Tag 0 is used for drivers with legacy EH as some
-@@ -5124,6 +5132,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -5127,6 +5135,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
/* libsas case */
if (ap->flags & ATA_FLAG_SAS_HOST) {
tag = ata_sas_allocate_tag(ap);
-@@ -5169,6 +5180,8 @@ void ata_qc_free(struct ata_queued_cmd *
+@@ -5172,6 +5183,8 @@ void ata_qc_free(struct ata_queued_cmd *
qc->tag = ATA_TAG_POISON;
if (ap->flags & ATA_FLAG_SAS_HOST)
ata_sas_free_tag(tag, ap);
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
-@@ -918,6 +918,8 @@ struct ata_port_operations {
+@@ -919,6 +919,8 @@ struct ata_port_operations {
void (*qc_prep)(struct ata_queued_cmd *qc);
unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
/*
* Configuration and exception handling
-@@ -1008,6 +1010,9 @@ struct ata_port_operations {
+@@ -1009,6 +1011,9 @@ struct ata_port_operations {
void (*phy_reset)(struct ata_port *ap);
void (*eng_timeout)(struct ata_port *ap);
+++ /dev/null
-From 8e72a3a1be8f6328bd7ef491332ba541547b6086 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:38:51 +0200
-Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2295,7 +2295,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -2385,7 +2385,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
- #define MAX_WORD_RETRIES 3
+ #define MAX_RETRIES 3
@@ -51,7 +51,9 @@
projects / openwrt / staging / mkresin.git / commitdiff