lantiq: dts: bus or bridge
authorMathias Kresin <dev@kresin.me>
Sun, 27 Jan 2019 14:13:52 +0000 (15:13 +0100)
committerMathias Kresin <dev@kresin.me>
Tue, 29 Jan 2019 20:15:35 +0000 (21:15 +0100)
Are they different busses or pci bridges. If they are pci bridges, we
need ranges.

Signed-off-by: Mathias Kresin <dev@kresin.me>
target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370-REV2.dtsi
target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts
target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi
target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi

index 5713d6e..980b2a6 100644 (file)
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
-               device_type = "pci";
 
                wifi@0,0 {
                        compatible = "pci0,0";
index f07849e..dddf9d8 100644 (file)
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
-               device_type = "pci";
 
                wifi@168c,002e {
                        compatible = "pci168c,002e";
index 6589b44..7d087a1 100644 (file)
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
-               device_type = "pci";
 
                ath9k: wifi@168c,002e {
                        compatible = "pci168c,002e";
index b31212c..1903e7e 100644 (file)
                        interrupt-parent = <&icu0>;
                        interrupts = <161 144>;
 
-                       device_type = "pci";
-
                        gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
                };