bcm63xx: add support for linux 3.1-rc1
authorJonas Gorski <jogo@openwrt.org>
Tue, 9 Aug 2011 12:19:49 +0000 (12:19 +0000)
committerJonas Gorski <jogo@openwrt.org>
Tue, 9 Aug 2011 12:19:49 +0000 (12:19 +0000)
SVN-Revision: 27941

40 files changed:
target/linux/brcm63xx/config-3.1 [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/141-led_count.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/220-wl_exports.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/240-spi.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/441-board-NB4.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/449-board_hw553.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/454-board_livebox.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_ehci.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch [new file with mode: 0644]

diff --git a/target/linux/brcm63xx/config-3.1 b/target/linux/brcm63xx/config-3.1
new file mode 100644 (file)
index 0000000..5d45d67
--- /dev/null
@@ -0,0 +1,156 @@
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ATH79 is not set
+CONFIG_AUDIT=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BOARD_BCM963XX=y
+# CONFIG_BOARD_LIVEBOX is not set
+# CONFIG_BRCMUTIL is not set
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRAMFS=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_DEVICE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_CPU=y
+CONFIG_KEXEC=y
+# CONFIG_LANTIQ is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM963XX=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RELAY=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SPI=y
+# CONFIG_SPI_BCM63XX is not set
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch b/target/linux/brcm63xx/patches-3.1/001-6345_cpu.patch
new file mode 100644 (file)
index 0000000..0f250ca
--- /dev/null
@@ -0,0 +1,122 @@
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
+-      if (BCMCPU_IS_6345())
+-              return (8 * 1024 * 1024);
++      if (BCMCPU_IS_6345()) {
++              val = bcm_sdram_readl(SDRAM_MBASE_REG);
++              return (val * 8 * 1024 * 1024);
++      }
+       if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+               val = bcm_sdram_readl(SDRAM_CFG_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -734,6 +734,8 @@
+ #define SDRAM_CFG_BANK_SHIFT          13
+ #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
++#define SDRAM_MBASE_REG                       0xc
++
+ #define SDRAM_PRIO_REG                        0x2C
+ #define SDRAM_PRIO_MIPS_SHIFT         29
+ #define SDRAM_PRIO_MIPS_MASK          (1 << SDRAM_PRIO_MIPS_SHIFT)
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -709,15 +709,9 @@ void __init board_prom_init(void)
+       char cfe_version[32];
+       u32 val;
+-      /* read base address of boot chip select (0)
+-       * 6345 does not have MPI but boots from standard
+-       * MIPS Flash address */
+-      if (BCMCPU_IS_6345())
+-              val = 0x1fc00000;
+-      else {
+-              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-              val &= MPI_CSBASE_BASE_MASK;
+-      }
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
+       boot_addr = (u8 *)KSEG1ADDR(val);
+       /* dump cfe version */
+@@ -893,12 +887,9 @@ int __init board_register_devices(void)
+               bcm63xx_dsp_register(&board.dsp);
+       /* read base address of boot chip select (0) */
+-      if (BCMCPU_IS_6345())
+-              val = 0x1fc00000;
+-      else {
+-              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-              val &= MPI_CSBASE_BASE_MASK;
+-      }
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++
+       mtd_resources[0].start = val;
+       mtd_resources[0].end = 0x1FFFFFFF;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -163,7 +163,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_ENET0_BASE           (0xfffe1800)
+ #define BCM_6345_ENETDMA_BASE         (0xfffe2800)
+ #define BCM_6345_PCMCIA_BASE          (0xfffe2028)
+-#define BCM_6345_MPI_BASE             (0xdeadbeef)
++#define BCM_6345_MPI_BASE             (0xfffe2000)
+ #define BCM_6345_OHCI0_BASE           (0xfffe2100)
+ #define BCM_6345_OHCI_PRIV_BASE               (0xfffe2200)
+ #define BCM_6345_USBH_PRIV_BASE               (0xdeadbeef)
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -4,7 +4,7 @@
+  * for more details.
+  *
+  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
+  */
+ #include <linux/kernel.h>
+@@ -33,7 +33,10 @@ static void bcm63xx_gpio_set(struct gpio
+               BUG();
+       if (gpio < 32) {
+-              reg = GPIO_DATA_LO_REG;
++              if (!BCMCPU_IS_6345())
++                      reg = GPIO_DATA_LO_REG;
++              else
++                      reg = GPIO_DATA_HI_REG;
+               mask = 1 << gpio;
+               v = &gpio_out_low;
+       } else {
+@@ -60,7 +63,10 @@ static int bcm63xx_gpio_get(struct gpio_
+               BUG();
+       if (gpio < 32) {
+-              reg = GPIO_DATA_LO_REG;
++              if (!BCMCPU_IS_6345())
++                      reg = GPIO_DATA_LO_REG;
++              else
++                      reg = GPIO_DATA_HI_REG;
+               mask = 1 << gpio;
+       } else {
+               reg = GPIO_DATA_HI_REG;
+@@ -125,7 +131,11 @@ static struct gpio_chip bcm63xx_gpio_chi
+ int __init bcm63xx_gpio_init(void)
+ {
+-      gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
++      if (!BCMCPU_IS_6345())
++              gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
++      else
++              gpio_out_low = bcm_gpio_readl(GPIO_DATA_HI_REG);
++
+       gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+       bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+       pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
diff --git a/target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch b/target/linux/brcm63xx/patches-3.1/007-usb-ohci-support.patch
new file mode 100644 (file)
index 0000000..b30b3d1
--- /dev/null
@@ -0,0 +1,125 @@
+The bcm63xx SOC has an integrated OHCI controller, this patch adds
+platform device registration and change board code to register ohci
+device when necessary.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig                          |    6 ++
+ arch/mips/bcm63xx/Makefile                         |    3 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
+ arch/mips/bcm63xx/dev-usb-ohci.c                   |   49 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
+ 5 files changed, 67 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
+ config BCM63XX_CPU_6348
+       bool "support 6348 CPU"
+       select HW_HAS_PCI
++      select USB_ARCH_HAS_OHCI
++      select USB_OHCI_BIG_ENDIAN_DESC
++      select USB_OHCI_BIG_ENDIAN_MMIO
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+       select HW_HAS_PCI
++      select USB_ARCH_HAS_OHCI
++      select USB_OHCI_BIG_ENDIAN_DESC
++      select USB_OHCI_BIG_ENDIAN_MMIO
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,5 +1,6 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+-                 dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
++                 dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
++                 dev-usb-ohci.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -25,6 +25,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_dsp.h>
+ #include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <board_bcm963xx.h>
+ #define PFX   "board_bcm963xx: "
+@@ -883,6 +884,9 @@ int __init board_register_devices(void)
+           !board_get_mac_address(board.enet1.mac_addr))
+               bcm63xx_enet_register(1, &board.enet1);
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
+       if (board.has_dsp)
+               bcm63xx_dsp_register(&board.dsp);
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,49 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++      {
++              /* start & end filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              /* start filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ohci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ohci_device = {
++      .name           = "bcm63xx_ohci",
++      .id             = 0,
++      .num_resources  = ARRAY_SIZE(ohci_resources),
++      .resource       = ohci_resources,
++      .dev            = {
++              .dma_mask               = &ohci_dmamask,
++              .coherent_dma_mask      = 0xffffffff,
++      },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++      if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
++              return 0;
++
++      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++      ohci_resources[0].end = ohci_resources[0].start;
++      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++      return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch b/target/linux/brcm63xx/patches-3.1/008-usb-ehci-support.patch
new file mode 100644 (file)
index 0000000..e7f1f47
--- /dev/null
@@ -0,0 +1,117 @@
+The bcm63xx SOC has an integrated EHCI controller, this patch adds
+platform device registration and change board code to register
+EHCI device when necessary.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig                          |    2 +
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
+ arch/mips/bcm63xx/dev-usb-ehci.c                   |   49 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
+ 5 files changed, 62 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
+       select USB_ARCH_HAS_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC
+       select USB_OHCI_BIG_ENDIAN_MMIO
++      select USB_ARCH_HAS_EHCI
++      select USB_EHCI_BIG_ENDIAN_MMIO
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ohci.o
++                 dev-usb-ohci.o dev-usb-ehci.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_dsp.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <board_bcm963xx.h>
+ #define PFX   "board_bcm963xx: "
+@@ -884,6 +885,9 @@ int __init board_register_devices(void)
+           !board_get_mac_address(board.enet1.mac_addr))
+               bcm63xx_enet_register(1, &board.enet1);
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
+       if (board.has_ohci0)
+               bcm63xx_ohci_register();
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,49 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++      {
++              /* start & end filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              /* start filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ehci_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_ehci_device = {
++      .name           = "bcm63xx_ehci",
++      .id             = 0,
++      .num_resources  = ARRAY_SIZE(ehci_resources),
++      .resource       = ehci_resources,
++      .dev            = {
++              .dma_mask               = &ehci_dmamask,
++              .coherent_dma_mask      = 0xffffffff,
++      },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++      if (!BCMCPU_IS_6358())
++              return 0;
++
++      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++      ehci_resources[0].end = ehci_resources[0].start;
++      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++      return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch b/target/linux/brcm63xx/patches-3.1/010-add_bcm63xx_ohci_controller.patch
new file mode 100644 (file)
index 0000000..add74a5
--- /dev/null
@@ -0,0 +1,202 @@
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/usb/host/ohci-bcm63xx.c |  166 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ohci-hcd.c     |    5 +
+ drivers/usb/host/ohci.h         |    2 +-
+ 3 files changed, 172 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/usb/host/ohci-bcm63xx.c
+
+--- /dev/null
++++ b/drivers/usb/host/ohci-bcm63xx.c
+@@ -0,0 +1,166 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static struct clk *usb_host_clock;
++
++static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
++{
++      struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++      int ret;
++
++        /*
++         * port 2 can be shared with USB slave, but all boards seem to
++         * have only one host port populated, so we can hardcode it
++         */
++      ohci->num_ports = 1;
++
++      ret = ohci_init(ohci);
++      if (ret < 0)
++              return ret;
++
++      ret = ohci_run(ohci);
++      if (ret < 0) {
++              err("can't start %s", hcd->self.bus_name);
++              ohci_stop(hcd);
++              return ret;
++      }
++      return 0;
++}
++
++static const struct hc_driver ohci_bcm63xx_hc_driver = {
++      .description =          hcd_name,
++      .product_desc =         "BCM63XX integrated OHCI controller",
++      .hcd_priv_size =        sizeof(struct ohci_hcd),
++
++      .irq =                  ohci_irq,
++      .flags =                HCD_USB11 | HCD_MEMORY,
++      .start =                ohci_bcm63xx_start,
++      .stop =                 ohci_stop,
++      .shutdown =             ohci_shutdown,
++      .urb_enqueue =          ohci_urb_enqueue,
++      .urb_dequeue =          ohci_urb_dequeue,
++      .endpoint_disable =     ohci_endpoint_disable,
++      .get_frame_number =     ohci_get_frame,
++      .hub_status_data =      ohci_hub_status_data,
++      .hub_control =          ohci_hub_control,
++      .start_port_reset =     ohci_start_port_reset,
++};
++
++static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++      struct resource *res_mem;
++      struct usb_hcd *hcd;
++      struct ohci_hcd *ohci;
++      u32 reg;
++      int ret, irq;
++
++      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      irq = platform_get_irq(pdev, 0);
++      if (!res_mem || irq < 0)
++              return -ENODEV;
++
++      if (BCMCPU_IS_6348()) {
++              struct clk *clk;
++              /* enable USB host clock */
++              clk = clk_get(&pdev->dev, "usbh");
++              if (IS_ERR(clk))
++                      return -ENODEV;
++
++              clk_enable(clk);
++              usb_host_clock = clk;
++              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++
++      } else if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++      } else
++              return 0;
++
++      hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++      if (!hcd)
++              return -ENOMEM;
++      hcd->rsrc_start = res_mem->start;
++      hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++      if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++              pr_debug("request_mem_region failed\n");
++              ret = -EBUSY;
++              goto out;
++      }
++
++      hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++      if (!hcd->regs) {
++              pr_debug("ioremap failed\n");
++              ret = -EIO;
++              goto out1;
++      }
++
++      ohci = hcd_to_ohci(hcd);
++      ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
++              OHCI_QUIRK_FRAME_NO;
++      ohci_hcd_init(ohci);
++
++      ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++      if (ret)
++              goto out2;
++
++      platform_set_drvdata(pdev, hcd);
++      return 0;
++
++out2:
++      iounmap(hcd->regs);
++out1:
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++      usb_put_hcd(hcd);
++      return ret;
++}
++
++static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++      struct usb_hcd *hcd;
++
++      hcd = platform_get_drvdata(pdev);
++      usb_remove_hcd(hcd);
++      iounmap(hcd->regs);
++      usb_put_hcd(hcd);
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++      if (usb_host_clock) {
++              clk_disable(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++      platform_set_drvdata(pdev, NULL);
++      return 0;
++}
++
++static struct platform_driver ohci_hcd_bcm63xx_driver = {
++      .probe          = ohci_hcd_bcm63xx_drv_probe,
++      .remove         = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
++      .shutdown       = usb_hcd_platform_shutdown,
++      .driver         = {
++              .name   = "bcm63xx_ohci",
++              .owner  = THIS_MODULE,
++      },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ohci");
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1058,6 +1058,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER               ohci_hcd_da8xx_driver
+ #endif
++#ifdef CONFIG_BCM63XX
++#include "ohci-bcm63xx.c"
++#define PLATFORM_DRIVER               ohci_hcd_bcm63xx_driver
++#endif
++
+ #ifdef CONFIG_USB_OHCI_SH
+ #include "ohci-sh.c"
+ #define PLATFORM_DRIVER               ohci_hcd_sh_driver
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -646,7 +646,7 @@ static inline u32 hc32_to_cpup (const st
+  * some big-endian SOC implementations.  Same thing happens with PSW access.
+  */
+-#ifdef CONFIG_PPC_MPC52xx
++#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
+ #define big_endian_frame_no_quirk(ohci)       (ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci)       0
diff --git a/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch b/target/linux/brcm63xx/patches-3.1/011-add_bcm63xx_ehci_controller.patch
new file mode 100644 (file)
index 0000000..397562c
--- /dev/null
@@ -0,0 +1,178 @@
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/usb/host/ehci-bcm63xx.c |  154 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/host/ehci-hcd.c     |    5 +
+ 2 files changed, 159 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-bcm63xx.c
+
+--- /dev/null
++++ b/drivers/usb/host/ehci-bcm63xx.c
+@@ -0,0 +1,154 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ */
++
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++
++static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
++{
++      struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++      int retval;
++
++      retval = ehci_halt(ehci);
++      if (retval)
++              return retval;
++
++      retval = ehci_init(hcd);
++      if (retval)
++              return retval;
++
++      ehci_reset(ehci);
++      ehci_port_power(ehci, 0);
++
++      return retval;
++}
++
++
++static const struct hc_driver ehci_bcm63xx_hc_driver = {
++      .description =          hcd_name,
++      .product_desc =         "BCM63XX integrated EHCI controller",
++      .hcd_priv_size =        sizeof(struct ehci_hcd),
++
++      .irq =                  ehci_irq,
++      .flags =                HCD_MEMORY | HCD_USB2,
++
++      .reset =                ehci_bcm63xx_setup,
++      .start =                ehci_run,
++      .stop =                 ehci_stop,
++      .shutdown =             ehci_shutdown,
++
++      .urb_enqueue =          ehci_urb_enqueue,
++      .urb_dequeue =          ehci_urb_dequeue,
++      .endpoint_disable =     ehci_endpoint_disable,
++
++      .get_frame_number =     ehci_get_frame,
++
++      .hub_status_data =      ehci_hub_status_data,
++      .hub_control =          ehci_hub_control,
++      .bus_suspend =          ehci_bus_suspend,
++      .bus_resume =           ehci_bus_resume,
++      .relinquish_port =      ehci_relinquish_port,
++      .port_handed_over =     ehci_port_handed_over,
++};
++
++static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
++{
++      struct resource *res_mem;
++      struct usb_hcd *hcd;
++      struct ehci_hcd *ehci;
++      u32 reg;
++      int ret, irq;
++
++      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      irq = platform_get_irq(pdev, 0);;
++      if (!res_mem || irq < 0)
++              return -ENODEV;
++
++      reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
++      reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
++      reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++      bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
++
++      /*
++       * The magic value comes for the original vendor BSP and is
++       * needed for USB to work. Datasheet does not help, so the
++       * magic value is used as-is.
++       */
++      bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
++
++      hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
++      if (!hcd)
++              return -ENOMEM;
++      hcd->rsrc_start = res_mem->start;
++      hcd->rsrc_len = res_mem->end - res_mem->start + 1;
++
++      if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++              pr_debug("request_mem_region failed\n");
++              ret = -EBUSY;
++              goto out;
++      }
++
++      hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++      if (!hcd->regs) {
++              pr_debug("ioremap failed\n");
++              ret = -EIO;
++              goto out1;
++      }
++
++      ehci = hcd_to_ehci(hcd);
++      ehci->big_endian_mmio = 1;
++      ehci->big_endian_desc = 0;
++      ehci->caps = hcd->regs;
++      ehci->regs = hcd->regs +
++              HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
++      ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++      ehci->sbrn = 0x20;
++
++      ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++      if (ret)
++              goto out2;
++
++      platform_set_drvdata(pdev, hcd);
++      return 0;
++
++out2:
++      iounmap(hcd->regs);
++out1:
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++out:
++      usb_put_hcd(hcd);
++      return ret;
++}
++
++static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
++{
++      struct usb_hcd *hcd;
++
++      hcd = platform_get_drvdata(pdev);
++      usb_remove_hcd(hcd);
++      iounmap(hcd->regs);
++      usb_put_hcd(hcd);
++      release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++      platform_set_drvdata(pdev, NULL);
++      return 0;
++}
++
++static struct platform_driver ehci_hcd_bcm63xx_driver = {
++      .probe          = ehci_hcd_bcm63xx_drv_probe,
++      .remove         = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
++      .shutdown       = usb_hcd_platform_shutdown,
++      .driver         = {
++              .name   = "bcm63xx_ehci",
++              .owner  = THIS_MODULE,
++      },
++};
++
++MODULE_ALIAS("platform:bcm63xx_ehci");
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1291,6 +1291,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER               ehci_grlib_driver
+ #endif
++#ifdef CONFIG_BCM63XX
++#include "ehci-bcm63xx.c"
++#define PLATFORM_DRIVER               ehci_hcd_bcm63xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.1/040-bcm963xx_flashmap.patch
new file mode 100644 (file)
index 0000000..c8d257f
--- /dev/null
@@ -0,0 +1,137 @@
+From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
+ drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
+ drivers/mtd/redboot.c                     |   13 +++++++++--
+ 3 files changed, 38 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -822,20 +822,6 @@ void __init board_setup(void)
+               panic("unexpected CPU for bcm963xx board");
+ }
+-static struct mtd_partition mtd_partitions[] = {
+-      {
+-              .name           = "cfe",
+-              .offset         = 0x0,
+-              .size           = 0x40000,
+-      }
+-};
+-
+-static struct physmap_flash_data flash_data = {
+-      .width                  = 2,
+-      .nr_parts               = ARRAY_SIZE(mtd_partitions),
+-      .parts                  = mtd_partitions,
+-};
+-
+ static struct resource mtd_resources[] = {
+       {
+               .start          = 0,    /* filled at runtime */
+@@ -845,12 +831,9 @@ static struct resource mtd_resources[] =
+ };
+ static struct platform_device mtd_dev = {
+-      .name                   = "physmap-flash",
++      .name                   = "bcm963xx-flash",
+       .resource               = mtd_resources,
+       .num_resources          = ARRAY_SIZE(mtd_resources),
+-      .dev                    = {
+-              .platform_data  = &flash_data,
+-      },
+ };
+ static struct gpio_led_platform_data bcm63xx_led_data;
+--- a/drivers/mtd/maps/bcm963xx-flash.c
++++ b/drivers/mtd/maps/bcm963xx-flash.c
+@@ -27,6 +27,8 @@
+ #include <linux/vmalloc.h>
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
++#include <linux/magic.h>
++#include <linux/jffs2.h>
+ #include <asm/mach-bcm63xx/bcm963xx_tag.h>
+@@ -35,6 +37,14 @@
+ #define PFX KBUILD_MODNAME ": "
++struct squashfs_super_block {
++      __le32 s_magic;
++      __le32 pad0[9];
++      __le64 bytes_used;
++};
++
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
++
+ static struct mtd_partition *parsed_parts;
+ static struct mtd_info *bcm963xx_mtd_info;
+@@ -219,9 +229,21 @@ probe_ok:
+                       }
+               }
+       } else {
+-              dev_info(&pdev->dev, "unsupported bootloader\n");
+-              err = -ENODEV;
+-              goto err_probe;
++              printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
++              if (bcm963xx_mtd_info->size > 0x00400000) {
++                      printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
++                      bcm963xx_map.virt = (u32)(BCM63XX_EXTENDED_SIZE);
++              }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++              if (parsed_nr_parts == 0) {
++                      int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
++                      if (ret > 0) {
++                              part_type = "RedBoot";
++                              parsed_nr_parts = ret;
++                      }
++              }
++#endif
+       }
+       return mtd_device_register(bcm963xx_mtd_info, parsed_parts,
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -57,7 +57,7 @@ static inline int redboot_checksum(struc
+       return 1;
+ }
+-static int parse_redboot_partitions(struct mtd_info *master,
++int parse_redboot_partitions(struct mtd_info *master,
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
+@@ -180,6 +180,14 @@ static int parse_redboot_partitions(stru
+               goto out;
+       }
++      if (!fis_origin) {
++              for (i = 0; i < numslots; i++) {
++                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
++                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
++                      }
++              }
++      }
++
+       for (i = 0; i < numslots; i++) {
+               struct fis_list *new_fl, **prev;
+@@ -202,9 +210,8 @@ static int parse_redboot_partitions(stru
+               new_fl->img = &buf[i];
+                 if (fis_origin) {
+                         buf[i].flash_base -= fis_origin;
+-                } else {
+-                        buf[i].flash_base &= master->size-1;
+                 }
++              buf[i].flash_base &= (master->size << 1) - 1;
+               /* I'm sure the JFFS2 code has done me permanent damage.
+                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.1/041-bcm963xx_real_rootfs_length.patch
new file mode 100644 (file)
index 0000000..67c0d71
--- /dev/null
@@ -0,0 +1,45 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
+@@ -86,8 +86,10 @@ struct bcm_tag {
+       char rootfs_crc[CRC_LEN];
+       /* 224-227: CRC32 of kernel partition */
+       char kernel_crc[CRC_LEN];
+-      /* 228-235: Unused at present */
+-      char reserved1[8];
++      /* 228-231: Image sequence number */
++      char image_sequence[4];
++      /* 222-235: Openwrt: real rootfs length */
++      char real_rootfs_length[4];
+       /* 236-239: CRC32 of header excluding last 20 bytes */
+       char header_crc[CRC_LEN];
+       /* 240-255: Unused at present */
+--- a/drivers/mtd/maps/bcm963xx-flash.c
++++ b/drivers/mtd/maps/bcm963xx-flash.c
+@@ -64,7 +64,7 @@ static int parse_cfe_partitions(struct m
+       int ret;
+       size_t retlen;
+       unsigned int rootfsaddr, kerneladdr, spareaddr;
+-      unsigned int rootfslen, kernellen, sparelen, totallen;
++      unsigned int rootfslen, kernellen, sparelen;
+       int namelen = 0;
+       int i;
+       char *boardid;
+@@ -85,7 +85,7 @@ static int parse_cfe_partitions(struct m
+       sscanf(buf->kernel_address, "%u", &kerneladdr);
+       sscanf(buf->kernel_length, "%u", &kernellen);
+-      sscanf(buf->total_length, "%u", &totallen);
++      rootfslen = *(uint32_t *)(&(buf->real_rootfs_length));
+       tagversion = &(buf->tag_version[0]);
+       boardid = &(buf->board_id[0]);
+@@ -94,7 +94,8 @@ static int parse_cfe_partitions(struct m
+       kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
+       rootfsaddr = kerneladdr + kernellen;
+-      spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
++      rootfslen = roundup(rootfslen, master->erasesize);
++      spareaddr = rootfsaddr + rootfslen;
+       sparelen = master->size - spareaddr - master->erasesize;
+       rootfslen = spareaddr - rootfsaddr;
diff --git a/target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.1/070_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644 (file)
index 0000000..95c5cff
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/net/bcm63xx_enet.c
++++ b/drivers/net/bcm63xx_enet.c
+@@ -1517,7 +1517,7 @@ static int compute_hw_mtu(struct bcm_ene
+       actual_mtu = mtu;
+       /* add ethernet header + vlan tag size */
+-      actual_mtu += VLAN_ETH_HLEN;
++      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+       if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
+               return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch b/target/linux/brcm63xx/patches-3.1/080-bcm6345_enet.patch
new file mode 100644 (file)
index 0000000..630662f
--- /dev/null
@@ -0,0 +1,530 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -29,16 +29,15 @@
+                                       CKCTL_6338_SAR_EN |             \
+                                       CKCTL_6338_SPI_EN)
+-#define CKCTL_6345_CPU_EN             (1 << 0)
+-#define CKCTL_6345_BUS_EN             (1 << 1)
+-#define CKCTL_6345_EBI_EN             (1 << 2)
+-#define CKCTL_6345_UART_EN            (1 << 3)
+-#define CKCTL_6345_ADSLPHY_EN         (1 << 4)
+-#define CKCTL_6345_ENET_EN            (1 << 7)
+-#define CKCTL_6345_USBH_EN            (1 << 8)
++#define CKCTL_6345_CPU_EN             (1 << 16)
++#define CKCTL_6345_BUS_EN             (1 << 17)
++#define CKCTL_6345_EBI_EN             (1 << 18)
++#define CKCTL_6345_UART_EN            (1 << 19)
++#define CKCTL_6345_ADSLPHY_EN         (1 << 20)
++#define CKCTL_6345_ENET_EN            (1 << 23)
++#define CKCTL_6345_USBH_EN            (1 << 24)
+-#define CKCTL_6345_ALL_SAFE_EN                (CKCTL_6345_ENET_EN |   \
+-                                      CKCTL_6345_USBH_EN |    \
++#define CKCTL_6345_ALL_SAFE_EN                (CKCTL_6345_USBH_EN |   \
+                                       CKCTL_6345_ADSLPHY_EN)
+ #define CKCTL_6348_ADSLPHY_EN         (1 << 0)
+@@ -547,6 +546,39 @@
+ #define ENETDMA_SRAM4_REG(x)          (0x20c + (x) * 0x10)
++/* Broadcom 6345 ENET DMA definitions */
++#define ENETDMA_6345_CHANCFG_REG(x)   (0x00 + (x) * 0x40)
++#define ENETDMA_6345_CHANCFG_EN_SHIFT 0
++#define ENETDMA_6345_CHANCFG_EN_MASK  (1 << ENETDMA_6345_CHANCFG_EN_SHIFT)
++#define ENETDMA_6345_PKTHALT_SHIFT    1
++#define ENETDMA_6345_PKTHALT_MASK     (1 << ENETDMA_6345_PKTHALT_SHIFT)
++#define ENETDMA_6345_CHAINING_SHIFT   2
++#define ENETDMA_6345_CHAINING_MASK    (1 << ENETDMA_6345_CHAINING_SHIFT)
++#define ENETDMA_6345_WRAP_EN_SHIFT    3
++#define ENETDMA_6345_WRAP_EN_MASK     (1 << ENETDMA_6345_WRAP_EN_SHIFT)
++#define ENETDMA_6345_FLOWC_EN_SHIFT   4
++#define ENETDMA_6345_FLOWC_EN_MASK    (1 << ENETDMA_6345_FLOWC_EN_SHIFT)
++
++#define ENETDMA_6345_MAXBURST_REG(x)  (0x04 + (x) * 0x40)
++
++#define ENETDMA_6345_RSTART_REG(x)    (0x08 + (x) * 0x40)
++
++#define ENETDMA_6345_LEN_REG(x)               (0x0C + (x) * 0x40)
++
++#define ENETDMA_6345_BSTAT_REG(x)     (0x10 + (x) * 0x40)
++
++#define ENETDMA_6345_IR_REG(x)                (0x14 + (x) * 0x40)
++#define ENETDMA_6345_IR_BUFDONE_MASK  (1 << 0)
++#define ENETDMA_6345_IR_PKTDONE_MASK  (1 << 1)
++#define ENETDMA_6345_IR_NOTOWNER_MASK (1 << 2)
++
++#define ENETDMA_6345_IRMASK_REG(x)    (0x18 + (x) * 0x40)
++
++#define ENETDMA_6345_FC_REG(x)                (0x1C + (x) * 0x40)
++
++#define ENETDMA_6345_BUFALLOC_REG(x)  (0x20 + (x) * 0x40)
++
++
+ /*************************************************************************
+  * _REG relative to RSET_OHCI_PRIV
+  *************************************************************************/
+--- a/drivers/net/bcm63xx_enet.c
++++ b/drivers/net/bcm63xx_enet.c
+@@ -32,6 +32,7 @@
+ #include <linux/if_vlan.h>
+ #include <bcm63xx_dev_enet.h>
++#include <bcm63xx_cpu.h>
+ #include "bcm63xx_enet.h"
+ static char bcm_enet_driver_name[] = "bcm63xx_enet";
+@@ -178,6 +179,7 @@ static void bcm_enet_mdio_write_mii(stru
+ static int bcm_enet_refill_rx(struct net_device *dev)
+ {
+       struct bcm_enet_priv *priv;
++      unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
+       priv = netdev_priv(dev);
+@@ -206,7 +208,7 @@ static int bcm_enet_refill_rx(struct net
+               len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
+               len_stat |= DMADESC_OWNER_MASK;
+               if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
+-                      len_stat |= DMADESC_WRAP_MASK;
++                      len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
+                       priv->rx_dirty_desc = 0;
+               } else {
+                       priv->rx_dirty_desc++;
+@@ -217,7 +219,10 @@ static int bcm_enet_refill_rx(struct net
+               priv->rx_desc_count++;
+               /* tell dma engine we allocated one buffer */
+-              enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
++              if (!BCMCPU_IS_6345())
++                      enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
++              else
++                      enet_dma_writel(priv, 1, ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
+       }
+       /* If rx ring is still empty, set a timer to try allocating
+@@ -255,6 +260,7 @@ static int bcm_enet_receive_queue(struct
+       struct bcm_enet_priv *priv;
+       struct device *kdev;
+       int processed;
++      unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
+       priv = netdev_priv(dev);
+       kdev = &priv->pdev->dev;
+@@ -293,7 +299,7 @@ static int bcm_enet_receive_queue(struct
+               /* if the packet does not have start of packet _and_
+                * end of packet flag set, then just recycle it */
+-              if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
++              if ((len_stat & (DMADESC_ESOP_MASK >> desc_shift)) != (DMADESC_ESOP_MASK >> desc_shift)) {
+                       dev->stats.rx_dropped++;
+                       continue;
+               }
+@@ -353,8 +359,15 @@ static int bcm_enet_receive_queue(struct
+               bcm_enet_refill_rx(dev);
+               /* kick rx dma */
+-              enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+-                              ENETDMA_CHANCFG_REG(priv->rx_chan));
++              if (!BCMCPU_IS_6345())
++                      enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++                                      ENETDMA_CHANCFG_REG(priv->rx_chan));
++              else
++                      enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
++                                            ENETDMA_6345_CHAINING_MASK |
++                                            ENETDMA_6345_WRAP_EN_MASK |
++                                            ENETDMA_6345_FLOWC_EN_MASK,
++                                      ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
+       }
+       return processed;
+@@ -429,10 +442,21 @@ static int bcm_enet_poll(struct napi_str
+       dev = priv->net_dev;
+       /* ack interrupts */
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IR_REG(priv->rx_chan));
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IR_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IR_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IR_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IR_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IR_REG(priv->tx_chan));
++      }
+       /* reclaim sent skb */
+       tx_work_done = bcm_enet_tx_reclaim(dev, 0);
+@@ -451,10 +475,21 @@ static int bcm_enet_poll(struct napi_str
+       napi_complete(napi);
+       /* restore rx/tx interrupt */
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IRMASK_REG(priv->rx_chan));
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IRMASK_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IRMASK_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IRMASK_REG(priv->tx_chan));
++      }
+       return rx_work_done;
+ }
+@@ -497,8 +532,13 @@ static irqreturn_t bcm_enet_isr_dma(int
+       priv = netdev_priv(dev);
+       /* mask rx/tx interrupts */
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
++      }
+       napi_schedule(&priv->napi);
+@@ -514,6 +554,7 @@ static int bcm_enet_start_xmit(struct sk
+       struct bcm_enet_desc *desc;
+       u32 len_stat;
+       int ret;
++      unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
+       priv = netdev_priv(dev);
+@@ -539,14 +580,13 @@ static int bcm_enet_start_xmit(struct sk
+                                      DMA_TO_DEVICE);
+       len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
+-      len_stat |= DMADESC_ESOP_MASK |
+-              DMADESC_APPEND_CRC |
+-              DMADESC_OWNER_MASK;
++      len_stat |= ((DMADESC_ESOP_MASK >> desc_shift) |
++                  DMADESC_APPEND_CRC | DMADESC_OWNER_MASK);
+       priv->tx_curr_desc++;
+       if (priv->tx_curr_desc == priv->tx_ring_size) {
+               priv->tx_curr_desc = 0;
+-              len_stat |= DMADESC_WRAP_MASK;
++              len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
+       }
+       priv->tx_desc_count--;
+@@ -557,8 +597,15 @@ static int bcm_enet_start_xmit(struct sk
+       wmb();
+       /* kick tx dma */
+-      enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+-                      ENETDMA_CHANCFG_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345())
++              enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++                              ENETDMA_CHANCFG_REG(priv->tx_chan));
++      else
++              enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
++                                      ENETDMA_6345_CHAINING_MASK |
++                                      ENETDMA_6345_WRAP_EN_MASK |
++                                      ENETDMA_6345_FLOWC_EN_MASK,
++                              ENETDMA_6345_CHANCFG_REG(priv->tx_chan));
+       /* stop queue if no more desc available */
+       if (!priv->tx_desc_count)
+@@ -686,6 +733,9 @@ static void bcm_enet_set_flow(struct bcm
+               val &= ~ENET_RXCFG_ENFLOW_MASK;
+       enet_writel(priv, val, ENET_RXCFG_REG);
++      if (BCMCPU_IS_6345())
++              return;
++
+       /* tx flow control (pause frame generation) */
+       val = enet_dma_readl(priv, ENETDMA_CFG_REG);
+       if (tx_en)
+@@ -833,8 +883,13 @@ static int bcm_enet_open(struct net_devi
+       /* mask all interrupts and request them */
+       enet_writel(priv, 0, ENET_IRMASK_REG);
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
++      }
+       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+       if (ret)
+@@ -913,8 +968,12 @@ static int bcm_enet_open(struct net_devi
+       priv->rx_curr_desc = 0;
+       /* initialize flow control buffer allocation */
+-      enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+-                      ENETDMA_BUFALLOC_REG(priv->rx_chan));
++      if (!BCMCPU_IS_6345())
++              enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
++                              ENETDMA_BUFALLOC_REG(priv->rx_chan));
++      else
++              enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
++                              ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
+       if (bcm_enet_refill_rx(dev)) {
+               dev_err(kdev, "cannot allocate rx skb queue\n");
+@@ -923,37 +982,62 @@ static int bcm_enet_open(struct net_devi
+       }
+       /* write rx & tx ring addresses */
+-      enet_dma_writel(priv, priv->rx_desc_dma,
+-                      ENETDMA_RSTART_REG(priv->rx_chan));
+-      enet_dma_writel(priv, priv->tx_desc_dma,
+-                      ENETDMA_RSTART_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, priv->rx_desc_dma,
++                              ENETDMA_RSTART_REG(priv->rx_chan));
++              enet_dma_writel(priv, priv->tx_desc_dma,
++                              ENETDMA_RSTART_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, priv->rx_desc_dma,
++                              ENETDMA_6345_RSTART_REG(priv->rx_chan));
++              enet_dma_writel(priv, priv->tx_desc_dma,
++                              ENETDMA_6345_RSTART_REG(priv->tx_chan));
++      }
+       /* clear remaining state ram for rx & tx channel */
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->tx_chan));
++      }
+       /* set max rx/tx length */
+       enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
+       enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
+       /* set dma maximum burst len */
+-      enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
+-                      ENETDMA_MAXBURST_REG(priv->rx_chan));
+-      enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
+-                      ENETDMA_MAXBURST_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++                              ENETDMA_MAXBURST_REG(priv->rx_chan));
++              enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++                              ENETDMA_MAXBURST_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++                              ENETDMA_6345_MAXBURST_REG(priv->rx_chan));
++              enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
++                              ENETDMA_6345_MAXBURST_REG(priv->tx_chan));
++      }
+       /* set correct transmit fifo watermark */
+       enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
+       /* set flow control low/high threshold to 1/3 / 2/3 */
+-      val = priv->rx_ring_size / 3;
+-      enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
+-      val = (priv->rx_ring_size * 2) / 3;
+-      enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
++      if (!BCMCPU_IS_6345()) {
++              val = priv->rx_ring_size / 3;
++              enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
++              val = (priv->rx_ring_size * 2) / 3;
++              enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
++      } else {
++              enet_dma_writel(priv, 5, ENETDMA_6345_FC_REG(priv->rx_chan));
++              enet_dma_writel(priv, priv->rx_ring_size, ENETDMA_6345_LEN_REG(priv->rx_chan));
++              enet_dma_writel(priv, priv->tx_ring_size, ENETDMA_6345_LEN_REG(priv->tx_chan));
++      }
+       /* all set, enable mac and interrupts, start dma engine and
+        * kick rx dma channel */
+@@ -961,27 +1045,58 @@ static int bcm_enet_open(struct net_devi
+       val = enet_readl(priv, ENET_CTL_REG);
+       val |= ENET_CTL_ENABLE_MASK;
+       enet_writel(priv, val, ENET_CTL_REG);
+-      enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+-      enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+-                      ENETDMA_CHANCFG_REG(priv->rx_chan));
++
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
++              enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
++                              ENETDMA_CHANCFG_REG(priv->rx_chan));
++      } else {
++              enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
++                                      ENETDMA_6345_CHAINING_MASK |
++                                      ENETDMA_6345_WRAP_EN_MASK |
++                                      ENETDMA_6345_FLOWC_EN_MASK,
++                              ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
++      }
+       /* watch "mib counters about to overflow" interrupt */
+       enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
+       enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
+       /* watch "packet transferred" interrupt in rx and tx */
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IR_REG(priv->rx_chan));
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IR_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IR_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IR_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IR_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IR_REG(priv->tx_chan));
++      }
+       /* make sure we enable napi before rx interrupt  */
+       napi_enable(&priv->napi);
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IRMASK_REG(priv->rx_chan));
+-      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+-                      ENETDMA_IRMASK_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
++                              ENETDMA_IRMASK_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
++                                      ENETDMA_IR_PKTDONE_MASK |
++                                      ENETDMA_IR_NOTOWNER_MASK,
++                              ENETDMA_6345_IRMASK_REG(priv->tx_chan));
++      }
+       if (priv->has_phy)
+               phy_start(priv->phydev);
+@@ -1061,13 +1176,19 @@ static void bcm_enet_disable_dma(struct
+ {
+       int limit;
+-      enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
++      if (!BCMCPU_IS_6345())
++              enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
++      else
++              enet_dma_writel(priv, 0, ENETDMA_6345_CHANCFG_REG(chan));
+       limit = 1000;
+       do {
+               u32 val;
+-              val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
++              if (!BCMCPU_IS_6345())
++                      val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
++              else
++                      val = enet_dma_readl(priv, ENETDMA_6345_CHANCFG_REG(chan));
+               if (!(val & ENETDMA_CHANCFG_EN_MASK))
+                       break;
+               udelay(1);
+@@ -1094,8 +1215,13 @@ static int bcm_enet_stop(struct net_devi
+       /* mask all interrupts */
+       enet_writel(priv, 0, ENET_IRMASK_REG);
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+-      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      if (!BCMCPU_IS_6345()) {
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
++      } else {
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
++              enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
++      }
+       /* make sure no mib update is scheduled */
+       cancel_work_sync(&priv->mib_update_task);
+@@ -1624,6 +1750,7 @@ static int __devinit bcm_enet_probe(stru
+       const char *clk_name;
+       unsigned int iomem_size;
+       int i, ret;
++      unsigned int chan_offset = 0;
+       /* stop if shared driver failed, assume driver->probe will be
+        * called in the same order we register devices (correct ?) */
+@@ -1663,10 +1790,13 @@ static int __devinit bcm_enet_probe(stru
+       priv->irq_tx = res_irq_tx->start;
+       priv->mac_id = pdev->id;
++      if (BCMCPU_IS_6345())
++              chan_offset = 1;
++
+       /* get rx & tx dma channel id for this mac */
+       if (priv->mac_id == 0) {
+-              priv->rx_chan = 0;
+-              priv->tx_chan = 1;
++              priv->rx_chan = 0 + chan_offset;
++              priv->tx_chan = 1 + chan_offset;
+               clk_name = "enet0";
+       } else {
+               priv->rx_chan = 2;
+--- a/drivers/net/bcm63xx_enet.h
++++ b/drivers/net/bcm63xx_enet.h
+@@ -46,6 +46,9 @@ struct bcm_enet_desc {
+ #define DMADESC_ESOP_MASK     (DMADESC_EOP_MASK | DMADESC_SOP_MASK)
+ #define DMADESC_WRAP_MASK     (1 << 12)
++/* Shift down for EOP, SOP and WRAP bits */
++#define DMADESC_6345_SHIFT    (3)
++
+ #define DMADESC_UNDER_MASK    (1 << 9)
+ #define DMADESC_APPEND_CRC    (1 << 8)
+ #define DMADESC_OVSIZE_MASK   (1 << 4)
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -104,7 +104,7 @@ int __init bcm63xx_enet_register(int uni
+       if (unit > 1)
+               return -ENODEV;
+-      if (unit == 1 && BCMCPU_IS_6338())
++      if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345()))
+               return -ENODEV;
+       if (!shared_device_registered) {
diff --git a/target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch b/target/linux/brcm63xx/patches-3.1/100-reset_buttons.patch
new file mode 100644 (file)
index 0000000..f1f69f4
--- /dev/null
@@ -0,0 +1,98 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -15,6 +15,8 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/gpio_buttons.h>
++#include <linux/input.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -296,6 +298,16 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+       },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
+ };
+ static struct board_info __initdata board_96348gw = {
+@@ -354,6 +366,16 @@ static struct board_info __initdata boar
+                       .active_low     = 1,
+               },
+       },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
+ };
+ static struct board_info __initdata board_FAST2404 = {
+@@ -844,12 +866,23 @@ static struct platform_device bcm63xx_gp
+       .dev.platform_data      = &bcm63xx_led_data,
+ };
++static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
++      .poll_interval  = 20,
++};
++
++static struct platform_device bcm63xx_gpio_buttons_device = {
++      .name           = "gpio-buttons",
++      .id             = 0,
++      .dev.platform_data = &bcm63xx_gpio_buttons_data,
++};
++
+ /*
+  * third stage init callback, register all board devices.
+  */
+ int __init board_register_devices(void)
+ {
+       u32 val;
++      int button_count = 0;
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -891,5 +924,16 @@ int __init board_register_devices(void)
+       platform_device_register(&bcm63xx_gpio_leds);
++      /* count number of BUTTONs defined by this device */
++      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++              button_count++;
++
++      if (button_count) {
++              bcm63xx_gpio_buttons_data.nbuttons = button_count;
++              bcm63xx_gpio_buttons_data.buttons = board.buttons;
++
++              platform_device_register(&bcm63xx_gpio_buttons_device);
++      }
++
+       return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -57,6 +57,9 @@ struct board_info {
+       /* GPIO LEDs */
+       struct gpio_led leds[5];
++
++      /* Buttons */
++      struct gpio_button buttons[2];
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/141-led_count.patch b/target/linux/brcm63xx/patches-3.1/141-led_count.patch
new file mode 100644 (file)
index 0000000..0e61d4d
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -883,6 +883,7 @@ int __init board_register_devices(void)
+ {
+       u32 val;
+       int button_count = 0;
++      int led_count = 0;
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -919,7 +920,11 @@ int __init board_register_devices(void)
+       platform_device_register(&mtd_dev);
+-      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
++      /* count number of LEDs defined by this device */
++      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++              led_count++;
++
++      bcm63xx_led_data.num_leds = led_count;
+       bcm63xx_led_data.leds = board.leds;
+       platform_device_register(&bcm63xx_gpio_leds);
diff --git a/target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch b/target/linux/brcm63xx/patches-3.1/180-udc_preliminary_support.patch
new file mode 100644 (file)
index 0000000..2787742
--- /dev/null
@@ -0,0 +1,243 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -29,6 +29,7 @@
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_usb_udc.h>
+ #include <board_bcm963xx.h>
+ #define PFX   "board_bcm963xx: "
+@@ -400,6 +401,8 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+       .has_pccard                     = 1,
+       .has_ehci0                      = 1,
++
++      .has_udc0                       = 1,
+ };
+ static struct board_info __initdata board_rta1025w_16 = {
+@@ -911,6 +914,9 @@ int __init board_register_devices(void)
+       if (board.has_dsp)
+               bcm63xx_dsp_register(&board.dsp);
++      if (board.has_udc0)
++              bcm63xx_udc_register();
++
+       /* read base address of boot chip select (0) */
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-udc.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <bcm63xx_cpu.h>
++
++static struct resource udc_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 udc_dmamask = ~(u32)0;
++
++static struct platform_device bcm63xx_udc_device = {
++      .name           = "bcm63xx-udc",
++      .id             = 0,
++      .num_resources  = ARRAY_SIZE(udc_resources),
++      .resource       = udc_resources,
++      .dev            = {
++              .dma_mask               = &udc_dmamask,
++              .coherent_dma_mask      = 0xffffffff,
++      },
++};
++
++int __init bcm63xx_udc_register(void)
++{
++      if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
++              return 0;
++
++      udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
++      udc_resources[0].end = udc_resources[0].start;
++      udc_resources[0].end += RSET_UDC_SIZE - 1;
++      udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
++      return platform_device_register(&bcm63xx_udc_device);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6338_UART1_BASE           (0xdeadbeef)
+ #define BCM_6338_GPIO_BASE            (0xfffe0400)
+ #define BCM_6338_SPI_BASE             (0xfffe0c00)
+-#define BCM_6338_UDC0_BASE            (0xdeadbeef)
++#define BCM_6338_UDC0_BASE            (0xfffe3000)
+ #define BCM_6338_USBDMA_BASE          (0xfffe2400)
+ #define BCM_6338_OHCI0_BASE           (0xdeadbeef)
+ #define BCM_6338_OHCI_PRIV_BASE               (0xfffe3000)
+@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6345_UART1_BASE           (0xdeadbeef)
+ #define BCM_6345_GPIO_BASE            (0xfffe0400)
+ #define BCM_6345_SPI_BASE             (0xdeadbeef)
+-#define BCM_6345_UDC0_BASE            (0xdeadbeef)
++#define BCM_6345_UDC0_BASE            (0xfffe2100)
+ #define BCM_6345_USBDMA_BASE          (0xfffe2800)
+ #define BCM_6345_ENET0_BASE           (0xfffe1800)
+ #define BCM_6345_ENETDMA_BASE         (0xfffe2800)
+@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_UART1_BASE           (0xfffe0120)
+ #define BCM_6358_GPIO_BASE            (0xfffe0080)
+ #define BCM_6358_SPI_BASE             (0xdeadbeef)
+-#define BCM_6358_UDC0_BASE            (0xfffe0800)
++#define BCM_6358_UDC0_BASE            (0xfffe0400)
+ #define BCM_6358_OHCI0_BASE           (0xfffe1400)
+ #define BCM_6358_OHCI_PRIV_BASE               (0xdeadbeef)
+ #define BCM_6358_USBH_PRIV_BASE               (0xfffe1500)
+@@ -444,6 +444,7 @@ enum bcm63xx_irq {
+       IRQ_UART0,
+       IRQ_UART1,
+       IRQ_DSL,
++      IRQ_UDC0,
+       IRQ_ENET0,
+       IRQ_ENET1,
+       IRQ_ENET_PHY,
+@@ -486,7 +487,7 @@ enum bcm63xx_irq {
+ #define BCM_6345_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6345_DSL_IRQ              (IRQ_INTERNAL_BASE + 3)
+ #define BCM_6345_ATM_IRQ              (IRQ_INTERNAL_BASE + 4)
+-#define BCM_6345_USB_IRQ              (IRQ_INTERNAL_BASE + 5)
++#define BCM_6345_UDC0_IRQ             (IRQ_INTERNAL_BASE + 5)
+ #define BCM_6345_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
+ #define BCM_6345_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
+ #define BCM_6345_ENET0_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 13 + 1)
+@@ -508,10 +509,17 @@ enum bcm63xx_irq {
+ #define BCM_6348_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
+ #define BCM_6348_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6348_DSL_IRQ              (IRQ_INTERNAL_BASE + 4)
++#define BCM_6348_UDC0_IRQ             (IRQ_INTERNAL_BASE + 6)
+ #define BCM_6348_ENET1_IRQ            (IRQ_INTERNAL_BASE + 7)
+ #define BCM_6348_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
+ #define BCM_6348_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
+ #define BCM_6348_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 12)
++#define BCM_6348_USB_CNTL_RX_DMA_IRQ  (IRQ_INTERNAL_BASE + 14)
++#define BCM_6348_USB_CNTL_TX_DMA_IRQ  (IRQ_INTERNAL_BASE + 15)
++#define BCM_6348_USB_BULK_RX_DMA_IRQ  (IRQ_INTERNAL_BASE + 16)
++#define BCM_6348_USB_BULK_TX_DMA_IRQ  (IRQ_INTERNAL_BASE + 17)
++#define BCM_6348_USB_ISO_RX_DMA_IRQ   (IRQ_INTERNAL_BASE + 18)
++#define BCM_6348_USB_ISO_TX_DMA_IRQ   (IRQ_INTERNAL_BASE + 19)
+ #define BCM_6348_ENET0_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 20)
+ #define BCM_6348_ENET0_TXDMA_IRQ      (IRQ_INTERNAL_BASE + 21)
+ #define BCM_6348_ENET1_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 22)
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_UDC_H_
++#define BCM63XX_DEV_USB_UDC_H_
++
++int bcm63xx_udc_register(void);
++
++#endif /* BCM63XX_DEV_USB_UDC_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -47,6 +47,7 @@ struct board_info {
+       unsigned int    has_dsp:1;
+       unsigned int    has_uart0:1;
+       unsigned int    has_uart1:1;
++      unsigned int    has_udc0:1;
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ohci.o dev-usb-ehci.o
++                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
+ };
+ /*
++ * USB slave clock
++ */
++static void usbs_set(struct clk *clk, int enable)
++{
++      u32 mask;
++
++      switch(bcm63xx_get_cpu_id()) {
++      case BCM6338_CPU_ID:
++              mask = CKCTL_6338_USBS_EN;
++              break;
++      case BCM6348_CPU_ID:
++              mask = CKCTL_6348_USBS_EN;
++              break;
++      default:
++              return;
++      }
++      bcm_hwclock_set(mask, enable);
++}
++
++static struct clk clk_usbs = {
++      .set    = usbs_set,
++};
++
++/*
+  * SPI clock
+  */
+ static void spi_set(struct clk *clk, int enable)
+@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
+               return &clk_ephy;
+       if (!strcmp(id, "usbh"))
+               return &clk_usbh;
++      if (!strcmp(id, "usbs"))
++              return &clk_usbs;
+       if (!strcmp(id, "spi"))
+               return &clk_spi;
+       if (!strcmp(id, "periph"))
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
+       select USB_ARCH_HAS_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC
+       select USB_OHCI_BIG_ENDIAN_MMIO
++      select USB_ARCH_HAS_UDC
+ config BCM63XX_CPU_6345
+       bool "support 6345 CPU"
+@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
+       select USB_ARCH_HAS_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC
+       select USB_OHCI_BIG_ENDIAN_MMIO
++      select USB_ARCH_HAS_UDC
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
diff --git a/target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.1/200-extended-platform-devices.patch
new file mode 100644 (file)
index 0000000..2ec70c1
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -917,6 +917,9 @@ int __init board_register_devices(void)
+       if (board.has_udc0)
+               bcm63xx_udc_register();
++      if (board.num_devs)
++              platform_add_devices(board.devs, board.num_devs);
++
+       /* read base address of boot chip select (0) */
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -61,6 +61,10 @@ struct board_info {
+       /* Buttons */
+       struct gpio_button buttons[2];
++
++      /* Additional platform devices */
++      struct platform_device **devs;
++      unsigned int    num_devs;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch b/target/linux/brcm63xx/patches-3.1/200-spi-board-info.patch
new file mode 100644 (file)
index 0000000..b82032f
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -920,6 +920,9 @@ int __init board_register_devices(void)
+       if (board.num_devs)
+               platform_add_devices(board.devs, board.num_devs);
++      if (board.num_spis)
++              spi_register_board_info(board.spis, board.num_spis);
++
+       /* read base address of boot chip select (0) */
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -65,6 +65,10 @@ struct board_info {
+       /* Additional platform devices */
+       struct platform_device **devs;
+       unsigned int    num_devs;
++
++      /* Additional platform devices */
++      struct spi_board_info *spis;
++      unsigned int    num_spis;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch b/target/linux/brcm63xx/patches-3.1/210-no_ehci_over_current_check.patch
new file mode 100644 (file)
index 0000000..bb5d9e7
--- /dev/null
@@ -0,0 +1,17 @@
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -816,12 +816,14 @@ static int ehci_hub_control (
+                        * power switching; they're allowed to just limit the
+                        * current.  khubd will turn the power back on.
+                        */
++#ifndef CONFIG_BCM63XX
+                       if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
+                               ehci_writel(ehci,
+                                       temp & ~(PORT_RWC_BITS | PORT_POWER),
+                                       status_reg);
+                               temp = ehci_readl(ehci, status_reg);
+                       }
++#endif
+               }
+               /* whoever resumes must GetPortStatus to complete it!! */
diff --git a/target/linux/brcm63xx/patches-3.1/220-wl_exports.patch b/target/linux/brcm63xx/patches-3.1/220-wl_exports.patch
new file mode 100644 (file)
index 0000000..fbf28ad
--- /dev/null
@@ -0,0 +1,34 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -39,6 +39,13 @@ static unsigned int mac_addr_used;
+ static struct board_info board;
+ /*
++ * Required export for WL
++ */
++#define NVRAM_SPACE 0x8000
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
++
++/*
+  * known 6338 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6338
+@@ -752,6 +759,7 @@ void __init board_prom_init(void)
+       /* extract nvram data */
+       memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
++      memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
+       /* check checksum before using data */
+       if (nvram.version <= 4)
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.1/230-6358-enet1-external-mii-clk.patch
new file mode 100644 (file)
index 0000000..75a728f
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -823,6 +823,8 @@ void __init board_prom_init(void)
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G3_EXT_MII |
+                               GPIO_MODE_6348_G0_EXT_MII;
++              else if (BCMCPU_IS_6358())
++                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -400,6 +400,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
+ #define GPIO_MODE_6358_UTOPIA         (1 << 12)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
+ /*************************************************************************
diff --git a/target/linux/brcm63xx/patches-3.1/240-spi.patch b/target/linux/brcm63xx/patches-3.1/240-spi.patch
new file mode 100644 (file)
index 0000000..113d7b0
--- /dev/null
@@ -0,0 +1,930 @@
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -58,6 +58,7 @@ static const unsigned long bcm96338_regs
+ static const int bcm96338_irqs[] = {
+       [IRQ_TIMER]             = BCM_6338_TIMER_IRQ,
++      [IRQ_SPI]               = BCM_6338_SPI_IRQ,
+       [IRQ_UART0]             = BCM_6338_UART0_IRQ,
+       [IRQ_DSL]               = BCM_6338_DSL_IRQ,
+       [IRQ_ENET0]             = BCM_6338_ENET0_IRQ,
+@@ -132,6 +133,7 @@ static const unsigned long bcm96348_regs
+ static const int bcm96348_irqs[] = {
+       [IRQ_TIMER]             = BCM_6348_TIMER_IRQ,
++      [IRQ_SPI]               = BCM_6348_SPI_IRQ,
+       [IRQ_UART0]             = BCM_6348_UART0_IRQ,
+       [IRQ_DSL]               = BCM_6348_DSL_IRQ,
+       [IRQ_ENET0]             = BCM_6348_ENET0_IRQ,
+@@ -175,6 +177,7 @@ static const unsigned long bcm96358_regs
+ static const int bcm96358_irqs[] = {
+       [IRQ_TIMER]             = BCM_6358_TIMER_IRQ,
++      [IRQ_SPI]               = BCM_6358_SPI_IRQ,
+       [IRQ_UART0]             = BCM_6358_UART0_IRQ,
+       [IRQ_UART1]             = BCM_6358_UART1_IRQ,
+       [IRQ_DSL]               = BCM_6358_DSL_IRQ,
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -0,0 +1,98 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_spi.h>
++#include <bcm63xx_regs.h>
++
++#ifdef BCMCPU_RUNTIME_DETECT
++/*
++ * register offsets
++ */
++static const unsigned long bcm96338_regs_spi[] = {
++      __GEN_SPI_REGS_TABLE(6338)
++};
++
++static const unsigned long bcm96348_regs_spi[] = {
++      __GEN_SPI_REGS_TABLE(6348)
++};
++
++static const unsigned long bcm96358_regs_spi[] = {
++      __GEN_SPI_REGS_TABLE(6358)
++};
++
++const unsigned long *bcm63xx_regs_spi;
++EXPORT_SYMBOL(bcm63xx_regs_spi);
++
++static __init void bcm63xx_spi_regs_init(void)
++{
++      if (BCMCPU_IS_6338())
++              bcm63xx_regs_spi = bcm96338_regs_spi;
++      if (BCMCPU_IS_6348())
++              bcm63xx_regs_spi = bcm96348_regs_spi;
++      if (BCMCPU_IS_6358())
++              bcm63xx_regs_spi = bcm96358_regs_spi;
++}
++#else
++static __init void bcm63xx_spi_regs_init(void) { }
++#endif
++
++static struct resource spi_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static struct bcm63xx_spi_pdata spi_pdata = {
++      .bus_num                = 0,
++      .num_chipselect         = 8,
++      .speed_hz               = 50000000,     /* Fclk */
++};
++
++static struct platform_device bcm63xx_spi_device = {
++      .name           = "bcm63xx-spi",
++      .id             = 0,
++      .num_resources  = ARRAY_SIZE(spi_resources),
++      .resource       = spi_resources,
++      .dev            = {
++              .platform_data = &spi_pdata,
++      },
++};
++
++int __init bcm63xx_spi_register(void)
++{
++      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
++      spi_resources[0].end = spi_resources[0].start;
++      spi_resources[0].end += RSET_SPI_SIZE - 1;
++      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
++
++      if (BCMCPU_IS_6345())
++              return -ENODEV;
++
++      /* Fill in platform data */
++      if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
++              spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE;
++
++      if (BCMCPU_IS_6358())
++              spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE;
++
++      bcm63xx_spi_regs_init();
++
++      return platform_device_register(&bcm63xx_spi_device);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -109,6 +109,7 @@ enum bcm63xx_regs_set {
+ #define RSET_WDT_SIZE                 12
+ #define RSET_ENET_SIZE                        2048
+ #define RSET_ENETDMA_SIZE             2048
++#define RSET_SPI_SIZE                 256
+ #define RSET_UART_SIZE                        24
+ #define RSET_UDC_SIZE                 256
+ #define RSET_OHCI_SIZE                        256
+@@ -214,7 +215,7 @@ enum bcm63xx_regs_set {
+ #define BCM_6358_UART0_BASE           (0xfffe0100)
+ #define BCM_6358_UART1_BASE           (0xfffe0120)
+ #define BCM_6358_GPIO_BASE            (0xfffe0080)
+-#define BCM_6358_SPI_BASE             (0xdeadbeef)
++#define BCM_6358_SPI_BASE             (0xfffe0800)
+ #define BCM_6358_UDC0_BASE            (0xfffe0400)
+ #define BCM_6358_OHCI0_BASE           (0xfffe1400)
+ #define BCM_6358_OHCI_PRIV_BASE               (0xdeadbeef)
+@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs
+  */
+ enum bcm63xx_irq {
+       IRQ_TIMER = 0,
++      IRQ_SPI,
+       IRQ_UART0,
+       IRQ_UART1,
+       IRQ_DSL,
+@@ -507,6 +509,7 @@ enum bcm63xx_irq {
+  * 6348 irqs
+  */
+ #define BCM_6348_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
++#define BCM_6348_SPI_IRQ              (IRQ_INTERNAL_BASE + 1)
+ #define BCM_6348_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6348_DSL_IRQ              (IRQ_INTERNAL_BASE + 4)
+ #define BCM_6348_UDC0_IRQ             (IRQ_INTERNAL_BASE + 6)
+@@ -531,6 +534,7 @@ enum bcm63xx_irq {
+  * 6358 irqs
+  */
+ #define BCM_6358_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
++#define BCM_6358_SPI_IRQ              (IRQ_INTERNAL_BASE + 1)
+ #define BCM_6358_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
+ #define BCM_6358_UART1_IRQ            (IRQ_INTERNAL_BASE + 3)
+ #define BCM_6358_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -804,4 +804,116 @@
+ #define DMIPSPLLCFG_N2_SHIFT          29
+ #define DMIPSPLLCFG_N2_MASK           (0x7 << DMIPSPLLCFG_N2_SHIFT)
++/*************************************************************************
++ * _REG relative to RSET_SPI
++ *************************************************************************/
++
++/* BCM 6338 SPI core */
++#define SPI_BCM_6338_SPI_CMD          0x00    /* 16-bits register */
++#define SPI_BCM_6338_SPI_INT_STATUS   0x02
++#define SPI_BCM_6338_SPI_INT_MASK_ST  0x03
++#define SPI_BCM_6338_SPI_INT_MASK     0x04
++#define SPI_BCM_6338_SPI_ST           0x05
++#define SPI_BCM_6338_SPI_CLK_CFG      0x06
++#define SPI_BCM_6338_SPI_FILL_BYTE    0x07
++#define SPI_BCM_6338_SPI_MSG_TAIL     0x09
++#define SPI_BCM_6338_SPI_RX_TAIL      0x0b
++#define SPI_BCM_6338_SPI_MSG_CTL      0x40
++#define SPI_BCM_6338_SPI_MSG_DATA     0x41
++#define SPI_BCM_6338_SPI_MSG_DATA_SIZE        0x3f
++#define SPI_BCM_6338_SPI_RX_DATA      0x80
++#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f
++
++/* BCM 6348 SPI core */
++#define SPI_BCM_6348_SPI_CMD          0x00    /* 16-bits register */
++#define SPI_BCM_6348_SPI_INT_STATUS   0x02
++#define SPI_BCM_6348_SPI_INT_MASK_ST  0x03
++#define SPI_BCM_6348_SPI_INT_MASK     0x04
++#define SPI_BCM_6348_SPI_ST           0x05
++#define SPI_BCM_6348_SPI_CLK_CFG      0x06
++#define SPI_BCM_6348_SPI_FILL_BYTE    0x07
++#define SPI_BCM_6348_SPI_MSG_TAIL     0x09
++#define SPI_BCM_6348_SPI_RX_TAIL      0x0b
++#define SPI_BCM_6348_SPI_MSG_CTL      0x40
++#define SPI_BCM_6348_SPI_MSG_DATA     0x41
++#define SPI_BCM_6348_SPI_MSG_DATA_SIZE        0x3f
++#define SPI_BCM_6348_SPI_RX_DATA      0x80
++#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f
++
++/* BCM 6358 SPI core */
++#define SPI_BCM_6358_SPI_MSG_CTL      0x00    /* 16-bits register */
++
++#define SPI_BCM_6358_SPI_MSG_DATA     0x02
++#define SPI_BCM_6358_SPI_MSG_DATA_SIZE        0x21e
++
++#define SPI_BCM_6358_SPI_RX_DATA      0x400
++#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220
++
++#define SPI_BCM_6358_SPI_CMD          0x700   /* 16-bits register */
++
++#define SPI_BCM_6358_SPI_INT_STATUS   0x702
++#define SPI_BCM_6358_SPI_INT_MASK_ST  0x703
++
++#define SPI_BCM_6358_SPI_INT_MASK     0x704
++
++#define SPI_BCM_6358_SPI_ST           0x705
++
++#define SPI_BCM_6358_SPI_CLK_CFG      0x706
++
++#define SPI_BCM_6358_SPI_FILL_BYTE    0x707
++#define SPI_BCM_6358_SPI_MSG_TAIL     0x709
++#define SPI_BCM_6358_SPI_RX_TAIL      0x70B
++
++/* Shared SPI definitions */
++
++/* Message configuration */
++#define SPI_FD_RW                     0x00
++#define SPI_HD_W                      0x01
++#define SPI_HD_R                      0x02
++#define SPI_BYTE_CNT_SHIFT            0
++#define SPI_MSG_TYPE_SHIFT            14
++
++/* Command */
++#define SPI_CMD_NOOP                  0x00
++#define SPI_CMD_SOFT_RESET            0x01
++#define SPI_CMD_HARD_RESET            0x02
++#define SPI_CMD_START_IMMEDIATE               0x03
++#define SPI_CMD_COMMAND_SHIFT         0
++#define SPI_CMD_COMMAND_MASK          0x000f
++#define SPI_CMD_DEVICE_ID_SHIFT               4
++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT        8
++#define SPI_CMD_ONE_BYTE_SHIFT                11
++#define SPI_CMD_ONE_WIRE_SHIFT                12
++#define SPI_DEV_ID_0                  0
++#define SPI_DEV_ID_1                  1
++#define SPI_DEV_ID_2                  2
++#define SPI_DEV_ID_3                  3
++
++/* Interrupt mask */
++#define SPI_INTR_CMD_DONE             0x01
++#define SPI_INTR_RX_OVERFLOW          0x02
++#define SPI_INTR_TX_UNDERFLOW         0x04
++#define SPI_INTR_TX_OVERFLOW          0x08
++#define SPI_INTR_RX_UNDERFLOW         0x10
++#define SPI_INTR_CLEAR_ALL            0x1f
++
++/* Status */
++#define SPI_RX_EMPTY                  0x02
++#define SPI_CMD_BUSY                  0x04
++#define SPI_SERIAL_BUSY                       0x08
++
++/* Clock configuration */
++#define SPI_CLK_20MHZ                 0x00
++#define SPI_CLK_0_391MHZ              0x01
++#define SPI_CLK_0_781MHZ              0x02 /* default */
++#define SPI_CLK_1_563MHZ              0x03
++#define SPI_CLK_3_125MHZ              0x04
++#define SPI_CLK_6_250MHZ              0x05
++#define SPI_CLK_12_50MHZ              0x06
++#define SPI_CLK_25MHZ                 0x07
++#define SPI_CLK_MASK                  0x07
++#define SPI_SSOFFTIME_MASK            0x38
++#define SPI_SSOFFTIME_SHIFT           3
++#define SPI_BYTE_SWAP                 0x80
++
+ #endif /* BCM63XX_REGS_H_ */
+--- /dev/null
++++ b/drivers/spi/bcm63xx_spi.c
+@@ -0,0 +1,496 @@
++/*
++ * Broadcom BCM63xx SPI controller support
++ *
++ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++#include <linux/completion.h>
++#include <linux/err.h>
++
++#include <bcm63xx_dev_spi.h>
++
++#define PFX           KBUILD_MODNAME
++#define DRV_VER               "0.1.2"
++
++struct bcm63xx_spi {
++      spinlock_t              lock;
++      int                     stopping;
++        struct completion     done;
++
++      void __iomem            *regs;
++      int                     irq;
++
++      /* Platform data */
++        u32                   speed_hz;
++      unsigned                fifo_size;
++
++      /* Data buffers */
++      const unsigned char     *tx_ptr;
++      unsigned char           *rx_ptr;
++
++      /* data iomem */
++      u8 __iomem              *tx_io;
++      const u8 __iomem        *rx_io;
++
++      int                     remaining_bytes;
++
++      struct clk              *clk;
++      struct platform_device  *pdev;
++};
++
++static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
++                              unsigned int offset)
++{
++      return bcm_readw(bs->regs + bcm63xx_spireg(offset));
++}
++
++static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
++                              unsigned int offset)
++{
++      return bcm_readw(bs->regs + bcm63xx_spireg(offset));
++}
++
++static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
++                                u8 value, unsigned int offset)
++{
++      bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
++}
++
++static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
++                                u16 value, unsigned int offset)
++{
++      bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
++}
++
++static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
++                                    struct spi_transfer *t)
++{
++      u8 bits_per_word;
++      u8 clk_cfg;
++      u32 hz;
++      unsigned int div;
++
++      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++
++      bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
++      hz = (t) ? t->speed_hz : spi->max_speed_hz;
++      if (bits_per_word != 8) {
++              dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
++                      __func__, bits_per_word);
++              return -EINVAL;
++        }
++
++      if (spi->chip_select > spi->master->num_chipselect) {
++              dev_err(&spi->dev, "%s, unsupported slave %d\n",
++                      __func__, spi->chip_select);
++              return -EINVAL;
++      }
++
++      /* Check clock setting */
++      div = (bs->speed_hz / hz);
++      switch (div) {
++      case 2:
++              clk_cfg = SPI_CLK_25MHZ;
++              break;
++      case 4:
++              clk_cfg = SPI_CLK_12_50MHZ;
++              break;
++      case 8:
++              clk_cfg = SPI_CLK_6_250MHZ;
++              break;
++      case 16:
++              clk_cfg = SPI_CLK_3_125MHZ;
++              break;
++      case 32:
++              clk_cfg = SPI_CLK_1_563MHZ;
++              break;
++      case 64:
++              clk_cfg = SPI_CLK_0_781MHZ;
++              break;
++      case 128:
++      default:
++              /* Set to slowest mode for compatibility */
++              clk_cfg = SPI_CLK_0_391MHZ;
++              break;
++      }
++
++      bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG);
++      dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
++              div, hz, clk_cfg);
++
++      return 0;
++}
++
++/* the spi->mode bits understood by this driver: */
++#define MODEBITS (SPI_CPOL | SPI_CPHA)
++
++static int bcm63xx_spi_setup(struct spi_device *spi)
++{
++      struct bcm63xx_spi *bs;
++      int ret;
++
++      bs = spi_master_get_devdata(spi->master);
++
++      if (bs->stopping)
++              return -ESHUTDOWN;
++
++      if (!spi->bits_per_word)
++              spi->bits_per_word = 8;
++
++      if (spi->mode & ~MODEBITS) {
++              dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
++                      __func__, spi->mode & ~MODEBITS);
++              return -EINVAL;
++      }
++
++      ret = bcm63xx_spi_setup_transfer(spi, NULL);
++      if (ret < 0) {
++              dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
++                      spi->mode & ~MODEBITS);
++              return ret;
++      }
++
++      dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
++              __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
++
++      return 0;
++}
++
++/* Fill the TX FIFO with as many bytes as possible */
++static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
++{
++      u8 size;
++
++        /* Fill the Tx FIFO with as many bytes as possible */
++      size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
++              bs->fifo_size;
++      memcpy_toio(bs->tx_io, bs->tx_ptr, size);
++      bs->remaining_bytes -= size;
++}
++
++static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++      u16 msg_ctl;
++      u16 cmd;
++
++      dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
++              t->tx_buf, t->rx_buf, t->len);
++
++      /* Transmitter is inhibited */
++      bs->tx_ptr = t->tx_buf;
++      bs->rx_ptr = t->rx_buf;
++      init_completion(&bs->done);
++
++      if (t->tx_buf) {
++              bs->remaining_bytes = t->len;
++              bcm63xx_spi_fill_tx_fifo(bs);
++      }
++
++      /* Enable the command done interrupt which
++       * we use to determine completion of a command */
++      bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
++
++      /* Fill in the Message control register */
++      msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
++
++      if (t->rx_buf && t->tx_buf)
++              msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
++      else if (t->rx_buf)
++              msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
++      else if (t->tx_buf)
++              msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
++
++      bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
++
++      /* Issue the transfer */
++      cmd = SPI_CMD_START_IMMEDIATE;
++      cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
++      cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
++      bcm_spi_writew(bs, cmd, SPI_CMD);
++      wait_for_completion(&bs->done);
++
++      /* Disable the CMD_DONE interrupt */
++      bcm_spi_writeb(bs, 0, SPI_INT_MASK);
++
++      return t->len - bs->remaining_bytes;
++}
++
++static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
++{
++      struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
++      struct spi_transfer *t;
++      int ret = 0;
++
++      if (unlikely(list_empty(&m->transfers)))
++              return -EINVAL;
++
++      if (bs->stopping)
++              return -ESHUTDOWN;
++
++      list_for_each_entry(t, &m->transfers, transfer_list) {
++              ret += bcm63xx_txrx_bufs(spi, t);
++      }
++
++      m->complete(m->context);
++
++      return ret;
++}
++
++/* This driver supports single master mode only. Hence
++ * CMD_DONE is the only interrupt we care about
++ */
++static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
++{
++      struct spi_master *master = (struct spi_master *)dev_id;
++      struct bcm63xx_spi *bs = spi_master_get_devdata(master);
++      u8 intr;
++      u16 cmd;
++
++      /* Read interupts and clear them immediately */
++      intr = bcm_spi_readb(bs, SPI_INT_STATUS);
++      bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
++      bcm_spi_writeb(bs, 0, SPI_INT_MASK);
++
++      /* A tansfer completed */
++      if (intr & SPI_INTR_CMD_DONE) {
++              u8 rx_tail;
++
++              rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
++
++              /* Read out all the data */
++              if (rx_tail)
++                      memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
++
++              /* See if there is more data to send */
++              if (bs->remaining_bytes > 0) {
++                      bcm63xx_spi_fill_tx_fifo(bs);
++
++                      /* Start the transfer */
++                      bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
++                                     SPI_MSG_CTL);
++                      cmd = bcm_spi_readw(bs, SPI_CMD);
++                      cmd |= SPI_CMD_START_IMMEDIATE;
++                      cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
++                      bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
++                      bcm_spi_writew(bs, cmd, SPI_CMD);
++              } else {
++                      complete(&bs->done);
++              }
++      }
++
++      return IRQ_HANDLED;
++}
++
++
++static int __init bcm63xx_spi_probe(struct platform_device *pdev)
++{
++      struct resource *r;
++      struct device *dev = &pdev->dev;
++      struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
++      int irq;
++      struct spi_master *master;
++      struct clk *clk;
++      struct bcm63xx_spi *bs;
++      int ret;
++
++      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!r) {
++              dev_err(dev, "no iomem\n");
++              ret = -ENXIO;
++              goto out;
++      }
++
++      irq = platform_get_irq(pdev, 0);
++      if (irq < 0) {
++              dev_err(dev, "no irq\n");
++              ret = -ENXIO;
++              goto out;
++      }
++
++      clk = clk_get(dev, "spi");
++      if (IS_ERR(clk)) {
++              dev_err(dev, "no clock for device\n");
++              ret = -ENODEV;
++              goto out;
++      }
++
++      master = spi_alloc_master(dev, sizeof(*bs));
++      if (!master) {
++              dev_err(dev, "out of memory\n");
++              ret = -ENOMEM;
++              goto out_free;
++      }
++
++      bs = spi_master_get_devdata(master);
++      init_completion(&bs->done);
++
++      platform_set_drvdata(pdev, master);
++      bs->pdev = pdev;
++
++      if (!request_mem_region(r->start, r->end - r->start, PFX)) {
++              dev_err(dev, "iomem request failed\n");
++              ret = -ENXIO;
++              goto out_put_master;
++      }
++
++      bs->regs = ioremap_nocache(r->start, r->end - r->start);
++      if (!bs->regs) {
++              dev_err(dev, "unable to ioremap regs\n");
++              ret = -ENOMEM;
++              goto out_put_master;
++      }
++      bs->irq = irq;
++      bs->clk = clk;
++      bs->fifo_size = pdata->fifo_size;
++
++      ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master);
++      if (ret) {
++              dev_err(dev, "unable to request irq\n");
++              goto out_unmap;
++      }
++
++      master->bus_num = pdata->bus_num;
++      master->num_chipselect = pdata->num_chipselect;
++      master->setup = bcm63xx_spi_setup;
++      master->transfer = bcm63xx_transfer;
++      bs->speed_hz = pdata->speed_hz;
++      bs->stopping = 0;
++      bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
++      bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
++      spin_lock_init(&bs->lock);
++
++      /* Initialize hardware */
++      clk_enable(bs->clk);
++      bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
++
++      /* register and we are done */
++      ret = spi_register_master(master);
++      if (ret) {
++              dev_err(dev, "spi register failed\n");
++              goto out_reset_hw;
++      }
++
++      dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
++               r->start, irq, bs->fifo_size, DRV_VER);
++
++      return 0;
++
++out_reset_hw:
++      clk_disable(clk);
++      free_irq(irq, master);
++out_unmap:
++      iounmap(bs->regs);
++out_put_master:
++      spi_master_put(master);
++out_free:
++      clk_put(clk);
++out:
++      return ret;
++}
++
++static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
++{
++      struct spi_master       *master = platform_get_drvdata(pdev);
++      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
++      struct resource         *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++      /* reset spi block */
++      bcm_spi_writeb(bs, 0, SPI_INT_MASK);
++      spin_lock(&bs->lock);
++      bs->stopping = 1;
++
++      /* HW shutdown */
++      clk_disable(bs->clk);
++      clk_put(bs->clk);
++
++      spin_unlock(&bs->lock);
++
++      free_irq(bs->irq, master);
++      iounmap(bs->regs);
++      release_mem_region(r->start, r->end - r->start);
++      platform_set_drvdata(pdev, 0);
++      spi_unregister_master(master);
++
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++      struct spi_master       *master = platform_get_drvdata(pdev);
++      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
++
++        clk_disable(bs->clk);
++
++      return 0;
++}
++
++static int bcm63xx_spi_resume(struct platform_device *pdev)
++{
++      struct spi_master       *master = platform_get_drvdata(pdev);
++      struct bcm63xx_spi      *bs = spi_master_get_devdata(master);
++
++      clk_enable(bs->clk);
++
++      return 0;
++}
++#else
++#define bcm63xx_spi_suspend   NULL
++#define bcm63xx_spi_resume    NULL
++#endif
++
++static struct platform_driver bcm63xx_spi_driver = {
++      .driver = {
++              .name   = "bcm63xx-spi",
++              .owner  = THIS_MODULE,
++      },
++      .probe          = bcm63xx_spi_probe,
++      .remove         = __exit_p(bcm63xx_spi_remove),
++      .suspend        = bcm63xx_spi_suspend,
++      .resume         = bcm63xx_spi_resume,
++};
++
++
++static int __init bcm63xx_spi_init(void)
++{
++      return platform_driver_register(&bcm63xx_spi_driver);
++}
++
++static void __exit bcm63xx_spi_exit(void)
++{
++      platform_driver_unregister(&bcm63xx_spi_driver);
++}
++
++module_init(bcm63xx_spi_init);
++module_exit(bcm63xx_spi_exit);
++
++MODULE_ALIAS("platform:bcm63xx_spi");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
++MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VER);
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -74,6 +74,12 @@ config SPI_ATMEL
+         This selects a driver for the Atmel SPI Controller, present on
+         many AT32 (AVR32) and AT91 (ARM) chips.
++config SPI_BCM63XX
++      tristate "Broadcom BCM63xx SPI controller"
++      depends on BCM63XX
++      help
++        This is the SPI controller master driver for Broadcom BCM63xx SoC.
++
+ config SPI_BFIN
+       tristate "SPI controller driver for ADI Blackfin5xx"
+       depends on BLACKFIN
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_ALTERA)             += spi-altera.
+ obj-$(CONFIG_SPI_ATMEL)                       += spi-atmel.o
+ obj-$(CONFIG_SPI_ATH79)                       += spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550)              += spi-au1550.o
++obj-$(CONFIG_SPI_BCM63XX)             += bcm63xx_spi.o
+ obj-$(CONFIG_SPI_BFIN)                        += spi-bfin5xx.o
+ obj-$(CONFIG_SPI_BFIN_SPORT)          += spi-bfin-sport.o
+ obj-$(CONFIG_SPI_BITBANG)             += spi-bitbang.o
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -0,0 +1,85 @@
++#ifndef BCM63XX_DEV_SPI_H
++#define BCM63XX_DEV_SPI_H
++
++#include <linux/types.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_regs.h>
++
++int __init bcm63xx_spi_register(void);
++
++struct bcm63xx_spi_pdata {
++      unsigned int    fifo_size;
++      int             bus_num;
++      int             num_chipselect;
++      u32             speed_hz;
++};
++
++enum bcm63xx_regs_spi {
++        SPI_CMD,
++        SPI_INT_STATUS,
++        SPI_INT_MASK_ST,
++        SPI_INT_MASK,
++        SPI_ST,
++        SPI_CLK_CFG,
++        SPI_FILL_BYTE,
++        SPI_MSG_TAIL,
++        SPI_RX_TAIL,
++        SPI_MSG_CTL,
++        SPI_MSG_DATA,
++        SPI_RX_DATA,
++};
++
++#define __GEN_SPI_RSET_BASE(__cpu, __rset)                            \
++      case SPI_## __rset:                                             \
++              return SPI_BCM_## __cpu ##_SPI_## __rset;
++
++#define __GEN_SPI_RSET(__cpu)                                         \
++      switch (reg) {                                                  \
++      __GEN_SPI_RSET_BASE(__cpu, CMD)                                 \
++      __GEN_SPI_RSET_BASE(__cpu, INT_STATUS)                          \
++      __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)                         \
++      __GEN_SPI_RSET_BASE(__cpu, INT_MASK)                            \
++      __GEN_SPI_RSET_BASE(__cpu, ST)                                  \
++      __GEN_SPI_RSET_BASE(__cpu, CLK_CFG)                             \
++      __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)                           \
++      __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)                            \
++      __GEN_SPI_RSET_BASE(__cpu, RX_TAIL)                             \
++      __GEN_SPI_RSET_BASE(__cpu, MSG_CTL)                             \
++      __GEN_SPI_RSET_BASE(__cpu, MSG_DATA)                            \
++      __GEN_SPI_RSET_BASE(__cpu, RX_DATA)                             \
++      }
++
++#define __GEN_SPI_REGS_TABLE(__cpu)                                   \
++      [SPI_CMD]               = SPI_BCM_## __cpu ##_SPI_CMD,          \
++      [SPI_INT_STATUS]        = SPI_BCM_## __cpu ##_SPI_INT_STATUS,   \
++      [SPI_INT_MASK_ST]       = SPI_BCM_## __cpu ##_SPI_INT_MASK_ST,  \
++      [SPI_INT_MASK]          = SPI_BCM_## __cpu ##_SPI_INT_MASK,     \
++      [SPI_ST]                = SPI_BCM_## __cpu ##_SPI_ST,           \
++      [SPI_CLK_CFG]           = SPI_BCM_## __cpu ##_SPI_CLK_CFG,      \
++      [SPI_FILL_BYTE]         = SPI_BCM_## __cpu ##_SPI_FILL_BYTE,    \
++      [SPI_MSG_TAIL]          = SPI_BCM_## __cpu ##_SPI_MSG_TAIL,     \
++      [SPI_RX_TAIL]           = SPI_BCM_## __cpu ##_SPI_RX_TAIL,      \
++      [SPI_MSG_CTL]           = SPI_BCM_## __cpu ##_SPI_MSG_CTL,      \
++      [SPI_MSG_DATA]          = SPI_BCM_## __cpu ##_SPI_MSG_DATA,     \
++      [SPI_RX_DATA]           = SPI_BCM_## __cpu ##_SPI_RX_DATA,
++
++static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
++{
++#ifdef BCMCPU_RUNTIME_DETECT
++      extern const unsigned long *bcm63xx_regs_spi;
++        return bcm63xx_regs_spi[reg];
++#else
++#ifdef CONFIG_BCM63XX_CPU_6338
++      __GEN_SPI_RSET(6338)
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6348
++      __GEN_SPI_RSET(6348)
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6358
++      __GEN_SPI_RSET(6358)
++#endif
++#endif
++      return 0;
++}
++
++#endif /* BCM63XX_DEV_SPI_H */
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,6 +1,6 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
++                 dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -30,6 +30,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_udc.h>
++#include <bcm63xx_dev_spi.h>
+ #include <board_bcm963xx.h>
+ #define PFX   "board_bcm963xx: "
+@@ -933,6 +934,8 @@ int __init board_register_devices(void)
+       if (board.num_spis)
+               spi_register_board_info(board.spis, board.num_spis);
++      bcm63xx_spi_register();
++
+       /* read base address of boot chip select (0) */
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
diff --git a/target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.1/250-boardid_fixup.patch
new file mode 100644 (file)
index 0000000..a80a23f
--- /dev/null
@@ -0,0 +1,58 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -32,9 +32,13 @@
+ #include <bcm63xx_dev_usb_udc.h>
+ #include <bcm63xx_dev_spi.h>
+ #include <board_bcm963xx.h>
++#include <bcm_tag.h>
+ #define PFX   "board_bcm963xx: "
++#define CFE_OFFSET_64K                0x10000
++#define CFE_OFFSET_128K               0x20000
++
+ static struct bcm963xx_nvram nvram;
+ static unsigned int mac_addr_used;
+ static struct board_info board;
+@@ -734,6 +738,29 @@ static int board_get_mac_address(u8 *mac
+       return 0;
+ }
++static void __init boardid_fixup(u8 *boot_addr)
++{
++      struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
++
++      /* check if bcm_tag is at 64k offset */
++      if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
++              /* else try 128k */
++              tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
++              if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
++                      /* No tag found */
++                      printk(KERN_DEBUG "No bcm_tag found!\n");
++                      return;
++              }
++      }
++      /* check if we should override the boardid */
++      if (tag->information1[0] != '+')
++              return;
++
++      strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
++
++      printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
++}
++
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+@@ -776,6 +803,11 @@ void __init board_prom_init(void)
+               return;
+       }
++      if (strcmp(cfe_version, "unknown") != 0) {
++              /* cfe present */
++              boardid_fixup(boot_addr);
++      }
++
+       /* find board by name */
+       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+               if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch b/target/linux/brcm63xx/patches-3.1/260-ssb_sprom_mac_pool.patch
new file mode 100644 (file)
index 0000000..6321ed1
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -861,18 +861,6 @@ void __init board_prom_init(void)
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
+-
+-      /* Generate MAC address for WLAN and
+-       * register our SPROM */
+-#ifdef CONFIG_SSB_PCIHOST
+-      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+-              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              if (ssb_arch_register_fallback_sprom(
+-                              &bcm63xx_get_fallback_sprom) < 0)
+-                      printk(KERN_ERR PFX "failed to register fallback SPROM\n");
+-      }
+-#endif
+ }
+ /*
+@@ -948,6 +936,19 @@ int __init board_register_devices(void)
+           !board_get_mac_address(board.enet1.mac_addr))
+               bcm63xx_enet_register(1, &board.enet1);
++      /* Generate MAC address for WLAN and
++       * register our SPROM, do this after registering enet devices
++       */
++#ifdef CONFIG_SSB_PCIHOST
++      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
++              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              if (ssb_arch_register_fallback_sprom(
++                              &bcm63xx_get_fallback_sprom) < 0)
++                      printk(KERN_ERR PFX "failed to register fallback SPROM\n");
++      }
++#endif
++
+       if (board.has_ehci0)
+               bcm63xx_ehci_register();
diff --git a/target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.1/300-alice_gate2_leds.patch
new file mode 100644 (file)
index 0000000..f54fab7
--- /dev/null
@@ -0,0 +1,113 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -603,6 +603,99 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
++
++      .leds = {
++              /*Each led on alice gate is bi-color */
++              {
++                      .name           = "power:red",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power:green",
++                      .gpio           = 4,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl:red",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl:green",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi:red",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi:green",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internet:red",
++                      .gpio           = 25,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internet:green",
++                      .gpio           = 24,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usr1:red",
++                      .gpio           = 27,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usr1:green",
++                      .gpio           = 26,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usr2:red",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usr2:green",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 37,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
+ };
+ static struct board_info __initdata board_DWVS0 = {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -57,7 +57,7 @@ struct board_info {
+       struct bcm63xx_dsp_platform_data dsp;
+       /* GPIO LEDs */
+-      struct gpio_led leds[5];
++      struct gpio_led leds[14];
+       /* Buttons */
+       struct gpio_button buttons[2];
diff --git a/target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.1/310-96348gw_a_leds.patch
new file mode 100644 (file)
index 0000000..7c5027f
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -475,6 +475,19 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usb",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              }
++      },
+ };
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch b/target/linux/brcm63xx/patches-3.1/440-board-D4PW.patch
new file mode 100644 (file)
index 0000000..07f6159
--- /dev/null
@@ -0,0 +1,66 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -489,6 +489,55 @@ static struct board_info __initdata boar
+               }
+       },
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++      .name                           = "D-4P-W",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .has_uart0                      = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "power:green",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "status",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internet:green",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internet:red",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 7,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -753,6 +802,7 @@ static const struct board_info __initdat
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
++      &board_96348_D4PW,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/441-board-NB4.patch b/target/linux/brcm63xx/patches-3.1/441-board-NB4.patch
new file mode 100644 (file)
index 0000000..b2fb0e2
--- /dev/null
@@ -0,0 +1,569 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -17,6 +17,9 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_buttons.h>
+ #include <linux/input.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/spi/74x164.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -39,6 +42,12 @@
+ #define CFE_OFFSET_64K                0x10000
+ #define CFE_OFFSET_128K               0x20000
++#define NB4_PID_OFFSET                0xff80
++#define NB4_74X164_GPIO_BASE  64
++#define NB4_SPI_GPIO_MOSI     7
++#define NB4_SPI_GPIO_CLK      6
++#define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
++
+ static struct bcm963xx_nvram nvram;
+ static unsigned int mac_addr_used;
+ static struct board_info board;
+@@ -780,6 +789,502 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++
++struct spi_gpio_platform_data nb4_spi_gpio_data = {
++      .sck            = NB4_SPI_GPIO_CLK,
++      .mosi           = NB4_SPI_GPIO_MOSI,
++      .miso           = SPI_GPIO_NO_MISO,
++      .num_chipselect = 1,
++};
++
++
++static struct platform_device nb4_spi_gpio = {
++      .name = "spi_gpio",
++      .id   = 1,
++      .dev = {
++              .platform_data = &nb4_spi_gpio_data,
++      },
++};
++
++static struct platform_device * __initdata nb4_devices[] = {
++      &nb4_spi_gpio,
++};
++
++const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
++      .base = NB4_74X164_GPIO_BASE
++};
++
++static struct spi_board_info nb4_spi_devices[] = {
++      {
++              .modalias = "74x164",
++              .max_speed_hz = 781000,
++              .bus_num = 1,
++              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++              .mode = SPI_MODE_0,
++              .platform_data = &nb4_74x164_platform_data
++      }
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++      .name                           = "NB4-SER-r0",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .has_udc0                       = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r1 = {
++      .name                           = "NB4-SER-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .has_udc0                       = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r2 = {
++      .name                           = "NB4-SER-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++      .name                           = "NB4-FXC-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .has_udc0                       = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r2 = {
++      .name                           = "NB4-FXC-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
+ #endif
+ /*
+@@ -810,9 +1315,30 @@ static const struct board_info __initdat
+       &board_96358vw2,
+       &board_AGPFS0,
+       &board_DWVS0,
++      &board_nb4_ser_r0,
++      &board_nb4_ser_r1,
++      &board_nb4_ser_r2,
++      &board_nb4_fxc_r1,
++      &board_nb4_fxc_r2,
+ #endif
+ };
++static void __init nb4_nvram_fixup(void)
++{
++      u8 *boot_addr, *p;
++      u32 val;
++
++      if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
++              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++              val &= MPI_CSBASE_BASE_MASK;
++              boot_addr = (u8 *)KSEG1ADDR(val);
++              /* Extract nb4 PID */
++              p = boot_addr + NB4_PID_OFFSET;
++              if (!memcmp(p, "NB4-", 4))
++                      memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
++      }
++}
++
+ /*
+  * Register a sane SPROMv2 to make the on-board
+  * bcm4318 WLAN work
+@@ -964,6 +1490,9 @@ void __init board_prom_init(void)
+               boardid_fixup(boot_addr);
+       }
++      /* Fixup broken nb4 board name */
++      nb4_nvram_fixup();
++
+       /* find board by name */
+       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+               if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.1/442-board-96338W2_E7T.patch
new file mode 100644 (file)
index 0000000..66ced55
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -146,6 +146,38 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96338w2_e7t = {
++      .name                           = "96338W2_E7T",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++              .leds = {
++              {
++                      .name           = "ppp",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "ppp-fail",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++
++              },
++      },
++};
+ #endif
+ /*
+@@ -1294,6 +1326,7 @@ static const struct board_info __initdat
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+       &board_96338w,
++      &board_96338w2_e7t,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.1/443-board-CPVA642.patch
new file mode 100644 (file)
index 0000000..0ace02d
--- /dev/null
@@ -0,0 +1,109 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -685,6 +685,98 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_CPVA642 = {
++      .name                           = "CPVA642",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++          /* bi-color */
++              {
++                      .name           = "power:red",
++                      .gpio           = 14,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power:green",
++                      .gpio           = 11,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "wifi:red",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi:green",
++                      .gpio           = 28,
++                      .active_low     = 0,
++              },
++              {
++                      .name           = "link:red",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "link:green",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              /* green only */
++              {
++                      .name           = "ether",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "phone1",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "phone2",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "usb",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++    },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+@@ -1347,6 +1439,7 @@ static const struct board_info __initdat
+       &board_96358vw,
+       &board_96358vw2,
+       &board_AGPFS0,
++      &board_CPVA642,
+       &board_DWVS0,
+       &board_nb4_ser_r0,
+       &board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.1/444-board_dsl_274xb_rev_c.patch
new file mode 100644 (file)
index 0000000..5bafc77
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -914,6 +914,59 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++      .name                           = "AW4139",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "dsl-274xb:green:power",
++                      .gpio           = 5,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "dsl-274xb:red:power",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:adsl",
++                      .gpio           = 9,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "dsl-274xb:green:internet",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "dsl-274xb:red:internet",
++                      .gpio           = 10,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
+ struct spi_gpio_platform_data nb4_spi_gpio_data = {
+       .sck            = NB4_SPI_GPIO_CLK,
+       .mosi           = NB4_SPI_GPIO_MOSI,
+@@ -1441,6 +1494,7 @@ static const struct board_info __initdat
+       &board_AGPFS0,
+       &board_CPVA642,
+       &board_DWVS0,
++      &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_ser_r1,
+       &board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch b/target/linux/brcm63xx/patches-3.1/445-board_spw500v.patch
new file mode 100644 (file)
index 0000000..e2215f2
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -579,6 +579,67 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_spw500v = {
++      .name                           = "SPW500V",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 6,
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "power:red",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power:green",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {       .name           = "pstn",
++                      .gpio           = 28,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "voip",
++                      .gpio           = 32,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -1486,6 +1547,7 @@ static const struct board_info __initdat
+       &board_96348gw_a,
+       &board_rta1025w_16,
+       &board_96348_D4PW,
++      &board_spw500v,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.1/447-board_gw6200_gw6000.patch
new file mode 100644 (file)
index 0000000..c06fda9
--- /dev/null
@@ -0,0 +1,129 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -432,6 +432,117 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_gw6200 = {
++      .name                           = "GW6200",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .has_dsp                        = 1,
++              .dsp = {
++        .gpio_rst             = 8, /* FIXME: What is real GPIO here? */
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "line1",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "line2",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "line3",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                  .name               = "ethernet",
++                  .gpio               = 35,
++                  .active_low = 1,
++              }, 
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
++static struct board_info __initdata board_gw6000 = {
++      .name                           = "GW6000",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 6,
++              .gpio_int               = 34,
++              .ext_irq                = 2,
++              .cs                     = 2,
++      },
++
++      /* GW6000 has no GPIO-controlled leds */
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 36,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+@@ -1540,6 +1651,8 @@ static const struct board_info __initdat
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+       &board_96348gw,
++      &board_gw6000,
++      &board_gw6200,
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.1/448-board-MAGIC.patch
new file mode 100644 (file)
index 0000000..47e7db1
--- /dev/null
@@ -0,0 +1,87 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -751,6 +751,76 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96348sv = {
++      .name                           = "MAGIC",
++      .expected_cpu_id        = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                        = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              /* is has BP_ENET_EXTERNAL_PHY */
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++      .has_ehci0                      = 1,
++
++      .has_dsp                        = 1,
++      .dsp = {
++              .gpio_rst               = 25,
++              .gpio_int               = 34,
++              .cs                             = 2,
++              .ext_irq                = 2,
++      },
++
++      .leds = {
++              {
++                      .name           = "voip",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 28,
++              },
++              {
++                      .name           = "usb",
++                      .gpio           = 35,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "hpna",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "stop",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -1661,6 +1731,7 @@ static const struct board_info __initdat
+       &board_rta1025w_16,
+       &board_96348_D4PW,
+       &board_spw500v,
++      &board_96348sv,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/449-board_hw553.patch b/target/linux/brcm63xx/patches-3.1/449-board_hw553.patch
new file mode 100644 (file)
index 0000000..964f46c
--- /dev/null
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1704,6 +1704,81 @@ static struct board_info __initdata boar
+       .spis = nb4_spi_devices,
+       .num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++static struct board_info __initdata board_HW553 = {
++      .name                           = "HW553",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              /*Each led on HW553 is bi-color (except wifi) */
++              {
++                      .name           = "lan:red",
++                      .gpio           = 34,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "lan:blue",
++                      .gpio           = 35,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl:red",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl:blue",
++                      .gpio           = 23,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power:red",
++                      .gpio           = 5,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++
++              {
++                      .name           = "power:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi:red",
++                      .gpio           = 25,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internetkey:red",
++                      .gpio           = 12,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "internetkey:blue",
++                      .gpio           = 13,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1746,6 +1821,7 @@ static const struct board_info __initdat
+       &board_nb4_ser_r2,
+       &board_nb4_fxc_r1,
+       &board_nb4_fxc_r2,
++      &board_HW553,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.1/450-board_rta1320_16m.patch
new file mode 100644 (file)
index 0000000..ed5a33b
--- /dev/null
@@ -0,0 +1,54 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -178,6 +178,43 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_rta1320_16m = {
++      .name                           = "RTA1320_16M",
++      .expected_cpu_id                = 0x6338,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++              .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "ppp",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "stop",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ /*
+@@ -1789,6 +1826,7 @@ static const struct board_info __initdat
+       &board_96338gw,
+       &board_96338w,
+       &board_96338w2_e7t,
++      &board_rta1320_16m,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch b/target/linux/brcm63xx/patches-3.1/451-board_spw303v.patch
new file mode 100644 (file)
index 0000000..db8d352
--- /dev/null
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1816,6 +1816,72 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++      .name                   = "96358-502V",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0              = 1,
++      .has_enet0              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "spw303v:green:power+adsl",
++                      .gpio           = 22,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:red:power+adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:ppp",
++                      .gpio           = 5,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:ses",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:voip",
++                      .gpio           = 27,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "spw303v:green:pots",
++                      .gpio           = 31,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 11,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "ses",
++                      .gpio           = 37,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      }
++};
+ #endif
+ /*
+@@ -1860,6 +1926,7 @@ static const struct board_info __initdat
+       &board_nb4_fxc_r1,
+       &board_nb4_fxc_r2,
+       &board_HW553,
++      &board_spw303v,
+ #endif
+ };
diff --git a/target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch b/target/linux/brcm63xx/patches-3.1/452-board_V2500V.patch
new file mode 100644 (file)
index 0000000..f28a10d
--- /dev/null
@@ -0,0 +1,111 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -858,6 +858,63 @@ static struct board_info __initdata boar
+       },
+ };
++      static struct board_info __initdata board_V2500V_BB = {
++        .name                           = "V2500V_BB",
++        .expected_cpu_id                = 0x6348,
++
++        .has_uart0                      = 1,
++        .has_enet0                      = 1,
++        .has_enet1                      = 1,
++        .has_pci                        = 1,
++
++        .enet0 = {
++                .has_phy                = 1,
++                .use_internal_phy       = 1,
++        },
++        .enet1 = {
++                .force_speed_100        = 1,
++                .force_duplex_full      = 1,
++        },
++
++      .leds = {
++              {
++                      .name           = "power:green",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "power:red",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 31,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
+ #endif
+ /*
+@@ -1911,6 +1968,7 @@ static const struct board_info __initdat
+       &board_96348_D4PW,
+       &board_spw500v,
+       &board_96348sv,
++      &board_V2500V_BB,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -2064,6 +2122,22 @@ void __init board_prom_init(void)
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
+       boot_addr = (u8 *)KSEG1ADDR(val);
++      printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
++
++      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
++      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
++      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
++      /* Do an early check of CFE and then select bank 0 */
++
++              if (boot_addr == (u8 *)0xbf800000) {
++              u8 *tmp_boot_addr;
++              tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0
++              memcpy(&nvram, tmp_boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
++              if (!strcmp(nvram.name, "V2500V_BB")) {
++                      printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
++                      boot_addr = (u8 *)0xbfc00000; // Bank 0
++              }
++      }
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+@@ -2265,6 +2339,13 @@ int __init board_register_devices(void)
+       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+       val &= MPI_CSBASE_BASE_MASK;
++      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++      /* Loading from CFE always uses Bank 0 */
++      if (!strcmp(board.name, "V2500V_BB")) {
++              printk(KERN_INFO PFX "V2500V: Start in Bank 0\n");
++              val = val + 0x400000; // Select Bank 0 start address
++      }
++
+       mtd_resources[0].start = val;
+       mtd_resources[0].end = 0x1FFFFFFF;
diff --git a/target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.1/453-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..a9e49eb
--- /dev/null
@@ -0,0 +1,73 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -401,6 +401,62 @@ static struct board_info __initdata boar
+       },
+ };
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "V2110:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "V2110:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "V2110:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -1969,6 +2025,7 @@ static const struct board_info __initdat
+       &board_spw500v,
+       &board_96348sv,
+       &board_V2500V_BB,
++      &board_V2110,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/454-board_livebox.patch b/target/linux/brcm63xx/patches-3.1/454-board_livebox.patch
new file mode 100644 (file)
index 0000000..b00c152
--- /dev/null
@@ -0,0 +1,251 @@
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -8,4 +8,10 @@ config BOARD_BCM963XX
+       select SSB
+        help
++config BOARD_LIVEBOX
++      bool "Inventel Livebox(es) boards"
++      select SSB
++      help
++       Inventel Livebox boards using the RedBoot bootloader.
++
+ endchoice
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
+ ccflags-y := -Werror
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,228 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/input.h>
++#include <linux/gpio_buttons.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "board_livebox: "
++
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox = {
++      .name                           = "Livebox",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++      .has_ehci0                      = 1,
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++      &board_livebox
++#endif
++};
++
++/*
++ * early init callback
++ */
++void __init board_prom_init(void)
++{
++      u32 val;
++
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++
++      /* assume board is a Livebox */
++      memcpy(&board, bcm963xx_boards[0], sizeof(board));
++
++      /* setup pin multiplexing depending on board enabled device,
++       * this has to be done this early since PCI init is done
++       * inside arch_initcall */
++      val = 0;
++
++      if (board.has_pci) {
++              bcm63xx_pci_enabled = 1;
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G2_PCI;
++      }
++
++      if (board.has_pccard) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
++      }
++
++      if (board.has_enet0 && !board.enet0.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      if (board.has_enet1 && !board.enet1.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++      if (!board.name[0])
++              panic("unable to detect bcm963xx board");
++      printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++      /* make sure we're running on expected cpu */
++      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++              panic("unexpected CPU for bcm963xx board");
++}
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++      return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++
++static int board_get_mac_address(u8 *mac)
++{
++      u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
++      u8 *p;
++      int count;
++
++      memcpy(mac, default_mac, ETH_ALEN);
++
++      p = mac + ETH_ALEN - 1;
++      count = mac_addr_used;
++
++      while (count--) {
++              do {
++                      (*p)++;
++                      if (*p != 0)
++                              break;
++                      p--;
++              } while (p != mac);
++      }
++
++      if (p == mac) {
++              printk(KERN_ERR PFX "unable to fetch mac address\n");
++              return -ENODEV;
++      }
++        mac_addr_used++;
++
++      return 0;
++}
++
++static struct resource mtd_resources[] = {
++      {
++              .start          = 0,    /* filled at runtime */
++              .end            = 0,    /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      }
++};
++
++static struct platform_device mtd_dev = {
++      .name                   = "bcm963xx-flash",
++      .resource               = mtd_resources,
++      .num_resources          = ARRAY_SIZE(mtd_resources),
++};
++
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++      u32 val;
++
++      if (board.has_uart0)
++              bcm63xx_uart_register(0);
++
++      if (board.has_pccard)
++              bcm63xx_pcmcia_register();
++
++      if (board.has_enet0 &&
++          !board_get_mac_address(board.enet0.mac_addr))
++              bcm63xx_enet_register(0, &board.enet0);
++
++      if (board.has_enet1 &&
++          !board_get_mac_address(board.enet1.mac_addr))
++              bcm63xx_enet_register(1, &board.enet1);
++
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
++
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++      mtd_resources[0].start = val;
++      mtd_resources[0].end = 0x1FFFFFFF;
++
++      platform_device_register(&mtd_dev);
++
++      return 0;
++}
++
diff --git a/target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.1/455-board_ct536_ct5621.patch
new file mode 100644 (file)
index 0000000..cdb931f
--- /dev/null
@@ -0,0 +1,60 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -457,6 +457,49 @@ static struct board_info __initdata boar
+ };
++static struct board_info __initdata board_ct536_ct5621 = {
++      .name                           = "CT536_CT5621",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 0,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl-fail",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -2026,6 +2069,7 @@ static const struct board_info __initdat
+       &board_96348sv,
+       &board_V2500V_BB,
+       &board_V2110,
++      &board_ct536_ct5621,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_ehci.patch b/target/linux/brcm63xx/patches-3.1/456-board_DWV-S0_ehci.patch
new file mode 100644 (file)
index 0000000..76ffa1e
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1347,6 +1347,7 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
+ };
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.1/977-ssb_export_fallback_sprom.patch
new file mode 100644 (file)
index 0000000..efedd24
--- /dev/null
@@ -0,0 +1,19 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2111,7 +2111,7 @@ static void __init nb4_nvram_fixup(void)
+  * bcm4318 WLAN work
+  */
+ #ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
++struct ssb_sprom bcm63xx_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+       .country_code           = 0x0,
+@@ -2131,6 +2131,7 @@ static struct ssb_sprom bcm63xx_sprom =
+       .boardflags_lo          = 0x2848,
+       .boardflags_hi          = 0x0000,
+ };
++EXPORT_SYMBOL(bcm63xx_sprom);
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {