ath79: merge glinet gl-x750 dtsi and dts
authorMathias Kresin <dev@kresin.me>
Mon, 26 Nov 2018 14:46:14 +0000 (15:46 +0100)
committerMathias Kresin <dev@kresin.me>
Tue, 27 Nov 2018 20:11:54 +0000 (21:11 +0100)
The board doesn't come in different flash type flavours, hence there is
no need to keep a dtsi + dts for this purpose.

While at it, fix some whitespace issues.

Signed-off-by: Mathias Kresin <dev@kresin.me>
target/linux/ath79/dts/qca9533_glinet_gl-x750.dts
target/linux/ath79/dts/qca9533_glinet_x750.dtsi [deleted file]

index 7313f96..14bad8a 100644 (file)
@@ -4,7 +4,83 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca9533_glinet_x750.dtsi"
+#include "qca9533.dtsi"
+
+/ {
+       compatible = "glinet,gl-x750", "qca,qca9533";
+       model = "GL.iNet GL-X750";
+
+       keys {
+               compatible = "gpio-keys-polled";
+
+               poll-interval = <20>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&jtag_disable_pins>;
+
+               button0 {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "gl-x750:green:power";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "gl-x750:green:wlan2g";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wlan5g {
+                       label = "gl-x750:green:wlan5g";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wan {
+                       label = "gl-x750:green:wan";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               4g {
+                       label = "gl-x750:green:4g";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
 
 &spi {
        status = "okay";
                                reg = <0x040000 0x010000>;
                        };
 
-                        art: partition@50000 {
-                                label = "art";
-                                reg = <0x050000 0x010000>;
-                        };
+                       art: partition@50000 {
+                               label = "art";
+                               reg = <0x050000 0x010000>;
+                       };
 
                        partition@60000 {
                                label = "firmware";
                                reg = <0x060000 0xfa0000>;
                        };
-
                };
        };
 };
+
+&eth0 {
+       status = "okay";
+       mtd-mac-address = <&art 0x0>;
+       phy-handle = <&swphy4>;
+};
+
+&eth1 {
+       mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x1002>;
+};
diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi
deleted file mode 100644 (file)
index e1f95d5..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "qca9533.dtsi"
-
-/ {
-       compatible = "glinet,gl-x750", "qca,qca9533";
-       model = "GL.iNet GL-X750";
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&jtag_disable_pins>;
-
-               button0 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power {
-                       label = "gl-x750:green:power";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               wlan2g {
-                       label = "gl-x750:green:wlan2g";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wlan5g {
-                       label = "gl-x750:green:wlan5g";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wan {
-                       label = "gl-x750:green:wan";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-               4g {
-                       label = "gl-x750:green:4g";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-       };
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&usb0 {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&eth0 {
-       status = "okay";
-       mtd-mac-address = <&art 0x0>;
-       phy-handle = <&swphy4>;
-};
-
-&eth1 {
-       mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&art 0x1002>;
-};