--- /dev/null
+From 7762bb134e3b40e8ee2611365775b7432190a9c7 Mon Sep 17 00:00:00 2001
+From: Wright Feng <wright.feng@cypress.com>
+Date: Mon, 11 Dec 2017 15:38:21 +0800
+Subject: [PATCH] brcmfmac: enlarge buffer size of caps to 512 bytes
+
+The buffer size of return of cap iovar is greater than 256 bytes in some
+firmwares. For instance, the return size of cap iovar is 271 bytes in 4373
+13.10.246.79 firmare. It makes feature capability parsing failed because
+caps buffer is default value.
+So we enlarge caps buffer size to 512 bytes and add the error print for
+cap iovar error.
+
+Signed-off-by: Wright Feng <wright.feng@cypress.com>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+@@ -130,13 +130,19 @@ static void brcmf_feat_iovar_data_set(st
+ }
+ }
+
++#define MAX_CAPS_BUFFER_SIZE 512
+ static void brcmf_feat_firmware_capabilities(struct brcmf_if *ifp)
+ {
+- char caps[256];
++ char caps[MAX_CAPS_BUFFER_SIZE];
+ enum brcmf_feat_id id;
+- int i;
++ int i, err;
++
++ err = brcmf_fil_iovar_data_get(ifp, "cap", caps, sizeof(caps));
++ if (err) {
++ brcmf_err("could not get firmware cap (%d)\n", err);
++ return;
++ }
+
+- brcmf_fil_iovar_data_get(ifp, "cap", caps, sizeof(caps));
+ brcmf_dbg(INFO, "[ %s]\n", caps);
+
+ for (i = 0; i < ARRAY_SIZE(brcmf_fwcap_map); i++) {
--- /dev/null
+From 3d110df8f74781354051e4bb1e3e97fa368b2f80 Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:07 +0100
+Subject: [PATCH] brcmfmac: Remove {r,w}_sdreg32
+
+Remove yet another IO function from the code and replace with one
+that already exists.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+[arend: keep address calculation, ie. (base + offset) in one line]
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 88 +++++++++++-----------
+ 1 file changed, 42 insertions(+), 46 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -660,30 +660,6 @@ static bool data_ok(struct brcmf_sdio *b
+ ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
+ }
+
+-/*
+- * Reads a register in the SDIO hardware block. This block occupies a series of
+- * adresses on the 32 bit backplane bus.
+- */
+-static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
+-{
+- struct brcmf_core *core = bus->sdio_core;
+- int ret;
+-
+- *regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
+-
+- return ret;
+-}
+-
+-static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
+-{
+- struct brcmf_core *core = bus->sdio_core;
+- int ret;
+-
+- brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
+-
+- return ret;
+-}
+-
+ static int
+ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
+ {
+@@ -1078,6 +1054,8 @@ static void brcmf_sdio_get_console_addr(
+
+ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
+ {
++ struct brcmf_sdio_dev *sdiod = bus->sdiodev;
++ struct brcmf_core *core = bus->sdio_core;
+ u32 intstatus = 0;
+ u32 hmb_data;
+ u8 fcbits;
+@@ -1086,10 +1064,14 @@ static u32 brcmf_sdio_hostmail(struct br
+ brcmf_dbg(SDIO, "Enter\n");
+
+ /* Read mailbox data and ack that we did so */
+- ret = r_sdreg32(bus, &hmb_data, SD_REG(tohostmailboxdata));
++ hmb_data = brcmf_sdiod_readl(sdiod,
++ core->base + SD_REG(tohostmailboxdata),
++ &ret);
++
++ if (!ret)
++ brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox),
++ SMB_INT_ACK, &ret);
+
+- if (ret == 0)
+- w_sdreg32(bus, SMB_INT_ACK, SD_REG(tosbmailbox));
+ bus->sdcnt.f1regdata += 2;
+
+ /* dongle indicates the firmware has halted/crashed */
+@@ -1163,6 +1145,8 @@ static u32 brcmf_sdio_hostmail(struct br
+
+ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
+ {
++ struct brcmf_sdio_dev *sdiod = bus->sdiodev;
++ struct brcmf_core *core = bus->sdio_core;
+ uint retries = 0;
+ u16 lastrbc;
+ u8 hi, lo;
+@@ -1204,7 +1188,8 @@ static void brcmf_sdio_rxfail(struct brc
+
+ if (rtx) {
+ bus->sdcnt.rxrtx++;
+- err = w_sdreg32(bus, SMB_NAK, SD_REG(tosbmailbox));
++ brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox),
++ SMB_NAK, &err);
+
+ bus->sdcnt.f1regdata++;
+ if (err == 0)
+@@ -2291,6 +2276,7 @@ static uint brcmf_sdio_sendfromq(struct
+ {
+ struct sk_buff *pkt;
+ struct sk_buff_head pktq;
++ u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus);
+ u32 intstatus = 0;
+ int ret = 0, prec_out, i;
+ uint cnt = 0;
+@@ -2329,7 +2315,8 @@ static uint brcmf_sdio_sendfromq(struct
+ if (!bus->intr) {
+ /* Check device status, signal pending interrupt */
+ sdio_claim_host(bus->sdiodev->func[1]);
+- ret = r_sdreg32(bus, &intstatus, SD_REG(intstatus));
++ intstatus = brcmf_sdiod_readl(bus->sdiodev,
++ intstat_addr, &ret);
+ sdio_release_host(bus->sdiodev->func[1]);
+ bus->sdcnt.f2txdata++;
+ if (ret != 0)
+@@ -2413,12 +2400,13 @@ static int brcmf_sdio_tx_ctrlframe(struc
+
+ static void brcmf_sdio_bus_stop(struct device *dev)
+ {
+- u32 local_hostintmask;
+- u8 saveclk;
+- int err;
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ struct brcmf_sdio *bus = sdiodev->bus;
++ struct brcmf_core *core = bus->sdio_core;
++ u32 local_hostintmask;
++ u8 saveclk;
++ int err;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+@@ -2435,7 +2423,9 @@ static void brcmf_sdio_bus_stop(struct d
+ brcmf_sdio_bus_sleep(bus, false, false);
+
+ /* Disable and clear interrupts at the chip level also */
+- w_sdreg32(bus, 0, SD_REG(hostintmask));
++ brcmf_sdiod_writel(sdiodev, core->base + SD_REG(hostintmask),
++ 0, NULL);
++
+ local_hostintmask = bus->hostintmask;
+ bus->hostintmask = 0;
+
+@@ -2454,7 +2444,8 @@ static void brcmf_sdio_bus_stop(struct d
+ sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+
+ /* Clear any pending interrupts now that F2 is disabled */
+- w_sdreg32(bus, local_hostintmask, SD_REG(intstatus));
++ brcmf_sdiod_writel(sdiodev, core->base + SD_REG(intstatus),
++ local_hostintmask, NULL);
+
+ sdio_release_host(sdiodev->func[1]);
+ }
+@@ -2521,7 +2512,9 @@ static int brcmf_sdio_intr_rstatus(struc
+
+ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
+ {
++ struct brcmf_sdio_dev *sdiod = bus->sdiodev;
+ u32 newstatus = 0;
++ u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus);
+ unsigned long intstatus;
+ uint txlimit = bus->txbound; /* Tx frames to send before resched */
+ uint framecnt; /* Temporary counter of tx/rx frames */
+@@ -2576,9 +2569,10 @@ static void brcmf_sdio_dpc(struct brcmf_
+ */
+ if (intstatus & I_HMB_FC_CHANGE) {
+ intstatus &= ~I_HMB_FC_CHANGE;
+- err = w_sdreg32(bus, I_HMB_FC_CHANGE, SD_REG(intstatus));
++ brcmf_sdiod_writel(sdiod, intstat_addr, I_HMB_FC_CHANGE, &err);
++
++ newstatus = brcmf_sdiod_readl(sdiod, intstat_addr, &err);
+
+- err = r_sdreg32(bus, &newstatus, SD_REG(intstatus));
+ bus->sdcnt.f1regdata += 2;
+ atomic_set(&bus->fcstate,
+ !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
+@@ -4017,22 +4011,21 @@ static void brcmf_sdio_firmware_callback
+ const struct firmware *code,
+ void *nvram, u32 nvram_len)
+ {
+- struct brcmf_bus *bus_if;
+- struct brcmf_sdio_dev *sdiodev;
+- struct brcmf_sdio *bus;
++ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
++ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
++ struct brcmf_sdio *bus = sdiodev->bus;
++ struct brcmf_sdio_dev *sdiod = bus->sdiodev;
++ struct brcmf_core *core = bus->sdio_core;
+ u8 saveclk;
+
+ brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
+- bus_if = dev_get_drvdata(dev);
+- sdiodev = bus_if->bus_priv.sdio;
++
+ if (err)
+ goto fail;
+
+ if (!bus_if->drvr)
+ return;
+
+- bus = sdiodev->bus;
+-
+ /* try to download image and nvram to the dongle */
+ bus->alp_only = true;
+ err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+@@ -4063,8 +4056,9 @@ static void brcmf_sdio_firmware_callback
+ }
+
+ /* Enable function 2 (frame transfers) */
+- w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
+- SD_REG(tosbmailboxdata));
++ brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata),
++ SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
++
+ err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
+
+
+@@ -4074,7 +4068,9 @@ static void brcmf_sdio_firmware_callback
+ if (!err) {
+ /* Set up the interrupt mask and enable interrupts */
+ bus->hostintmask = HOSTINTMASK;
+- w_sdreg32(bus, bus->hostintmask, SD_REG(hostintmask));
++ brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask),
++ bus->hostintmask, NULL);
++
+
+ brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+ } else {
--- /dev/null
+From dbda7dacb79a377e8ed9d38ce0e4a58b70aa9060 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 19 Dec 2017 13:47:08 +0100
+Subject: [PATCH] brcmfmac: Rename buscore to core for consistency
+
+Avoid confusion with unrelated _buscore labels.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+[arend: only do the rename]
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -2485,12 +2485,12 @@ static inline void brcmf_sdio_clrintr(st
+
+ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
+ {
+- struct brcmf_core *buscore = bus->sdio_core;
++ struct brcmf_core *core = bus->sdio_core;
+ u32 addr;
+ unsigned long val;
+ int ret;
+
+- addr = buscore->base + SD_REG(intstatus);
++ addr = core->base + SD_REG(intstatus);
+
+ val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
+ bus->sdcnt.f1regdata++;
--- /dev/null
+From 874bb8e49b7c6368f8ff9f2566c7bd06a2249be0 Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:09 +0100
+Subject: [PATCH] brcmfmac: stabilise the value of ->sbwad in use for some xfer
+ routines.
+
+The IO functions operate within the Chipcommon IO window. Explicitly
+set this, rather than relying on the last initialisation IO access to
+leave it set to the right value by chance.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 ++++----
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 1 +
+ 3 files changed, 10 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -529,7 +529,7 @@ int brcmf_sdiod_recv_buf(struct brcmf_sd
+
+ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
+ {
+- u32 addr = sdiodev->sbwad;
++ u32 addr = sdiodev->cc_core->base;
+ int err = 0;
+
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
+@@ -552,7 +552,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_
+ {
+ struct sk_buff *glom_skb = NULL;
+ struct sk_buff *skb;
+- u32 addr = sdiodev->sbwad;
++ u32 addr = sdiodev->cc_core->base;
+ int err = 0;
+
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
+@@ -593,7 +593,7 @@ done:
+ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
+ {
+ struct sk_buff *mypkt;
+- u32 addr = sdiodev->sbwad;
++ u32 addr = sdiodev->cc_core->base;
+ int err;
+
+ mypkt = brcmu_pkt_buf_get_skb(nbytes);
+@@ -625,7 +625,7 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd
+ struct sk_buff_head *pktq)
+ {
+ struct sk_buff *skb;
+- u32 addr = sdiodev->sbwad;
++ u32 addr = sdiodev->cc_core->base;
+ int err;
+
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3842,6 +3842,11 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ if (!bus->sdio_core)
+ goto fail;
+
++ /* Pick up the CHIPCOMMON core info struct, for bulk IO in bcmsdh.c */
++ sdiodev->cc_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_CHIPCOMMON);
++ if (!sdiodev->cc_core)
++ goto fail;
++
+ sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
+ BRCMF_BUSTYPE_SDIO,
+ bus->ci->chip,
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -178,6 +178,7 @@ struct brcmf_sdio_dev {
+ struct sdio_func *func[SDIO_MAX_FUNCS];
+ u8 num_funcs; /* Supported funcs on client */
+ u32 sbwad; /* Save backplane window address */
++ struct brcmf_core *cc_core; /* chipcommon core info struct */
+ struct brcmf_sdio *bus;
+ struct device *dev;
+ struct brcmf_bus *bus_if;
--- /dev/null
+From 508422f3695bf66f7b85fb4723c22f5166003ec6 Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:10 +0100
+Subject: [PATCH] brcmfmac: Correctly handle accesses to SDIO func0
+
+Rather than workaround the restrictions on func0 addressing in the
+driver, set MMC_QUIRK_LENIENT_FN0
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++++
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 4 ++--
+ 2 files changed, 6 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -995,6 +995,10 @@ static int brcmf_ops_sdio_probe(struct s
+ brcmf_dbg(SDIO, "Function#: %d\n", func->num);
+
+ dev = &func->dev;
++
++ /* Set MMC_QUIRK_LENIENT_FN0 for this card */
++ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
++
+ /* prohibit ACPI power management for this device */
+ brcmf_sdiod_acpi_set_power_manageable(dev, 0);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -297,10 +297,10 @@ void brcmf_sdiod_intr_unregister(struct
+ /* SDIO device register access interface */
+ /* Accessors for SDIO Function 0 */
+ #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
+- sdio_readb((sdiodev)->func[0], (addr), (r))
++ sdio_f0_readb((sdiodev)->func[0], (addr), (r))
+
+ #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
+- sdio_writeb((sdiodev)->func[0], (v), (addr), (ret))
++ sdio_f0_writeb((sdiodev)->func[0], (v), (addr), (ret))
+
+ /* Accessors for SDIO Function 1 */
+ #define brcmf_sdiod_readb(sdiodev, addr, r) \
--- /dev/null
+From 99d7b6fdfc8c24052c92c720330d31ca1332f996 Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:11 +0100
+Subject: [PATCH] brcmfmac: Remove func0 from function array
+
+func0 is not provided by the mmc stack as a function when probing.
+Instead providing specific access functions to read/write it.
+
+This prepares for a patch to remove the actual array entry itself.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+[arend: rephrased the commit message]
+[arend: removed unrelated comment for which separate patch is warranted]
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 5 +----
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 ++++---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 13 ++++++-------
+ 3 files changed, 11 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -1022,8 +1022,7 @@ static int brcmf_ops_sdio_probe(struct s
+ /* store refs to functions used. mmc_card does
+ * not hold the F0 function pointer.
+ */
+- sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL);
+- sdiodev->func[0]->num = 0;
++ sdiodev->func[0] = NULL;
+ sdiodev->func[1] = func->card->sdio_func[0];
+ sdiodev->func[2] = func;
+
+@@ -1049,7 +1048,6 @@ static int brcmf_ops_sdio_probe(struct s
+ fail:
+ dev_set_drvdata(&func->dev, NULL);
+ dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
+- kfree(sdiodev->func[0]);
+ kfree(sdiodev);
+ kfree(bus_if);
+ return err;
+@@ -1082,7 +1080,6 @@ static void brcmf_ops_sdio_remove(struct
+ dev_set_drvdata(&sdiodev->func[2]->dev, NULL);
+
+ kfree(bus_if);
+- kfree(sdiodev->func[0]);
+ kfree(sdiodev);
+ }
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3771,9 +3771,10 @@ static u32 brcmf_sdio_buscore_read32(voi
+ u32 val, rev;
+
+ val = brcmf_sdiod_readl(sdiodev, addr, NULL);
+- if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
+- sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
+- addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
++
++ if ((sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
++ sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
++ addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
+ rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+ if (rev >= 2) {
+ val &= ~CID_ID_MASK;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -21,7 +21,9 @@
+ #include <linux/firmware.h>
+ #include "firmware.h"
+
+-#define SDIO_FUNC_0 0
++/* Maximum number of I/O funcs */
++#define NUM_SDIO_FUNCS 3
++
+ #define SDIO_FUNC_1 1
+ #define SDIO_FUNC_2 2
+
+@@ -39,9 +41,6 @@
+ #define INTR_STATUS_FUNC1 0x2
+ #define INTR_STATUS_FUNC2 0x4
+
+-/* Maximum number of I/O funcs */
+-#define SDIOD_MAX_IOFUNCS 7
+-
+ /* mask of register map */
+ #define REG_F0_REG_MASK 0x7FF
+ #define REG_F1_MISC_MASK 0x1FFFF
+@@ -175,7 +174,7 @@ struct brcmf_sdio;
+ struct brcmf_sdiod_freezer;
+
+ struct brcmf_sdio_dev {
+- struct sdio_func *func[SDIO_MAX_FUNCS];
++ struct sdio_func *func[NUM_SDIO_FUNCS];
+ u8 num_funcs; /* Supported funcs on client */
+ u32 sbwad; /* Save backplane window address */
+ struct brcmf_core *cc_core; /* chipcommon core info struct */
+@@ -297,10 +296,10 @@ void brcmf_sdiod_intr_unregister(struct
+ /* SDIO device register access interface */
+ /* Accessors for SDIO Function 0 */
+ #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
+- sdio_f0_readb((sdiodev)->func[0], (addr), (r))
++ sdio_f0_readb((sdiodev)->func[1], (addr), (r))
+
+ #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
+- sdio_f0_writeb((sdiodev)->func[0], (v), (addr), (ret))
++ sdio_f0_writeb((sdiodev)->func[1], (v), (addr), (ret))
+
+ /* Accessors for SDIO Function 1 */
+ #define brcmf_sdiod_readb(sdiodev, addr, r) \
--- /dev/null
+From bcadaaa097c7ec103fe75f9da41f8fe52693b644 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 19 Dec 2017 13:47:12 +0100
+Subject: [PATCH] brcmfmac: More efficient and slightly easier to read fixup
+ for 4339 chips
+
+Its more efficient to test the register we're interested in first,
+potentially avoiding two more comparisons, and therefore always avoiding
+one comparison per call on all other chips.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+[arend: fix some checkpatch warnings]
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3772,15 +3772,16 @@ static u32 brcmf_sdio_buscore_read32(voi
+
+ val = brcmf_sdiod_readl(sdiodev, addr, NULL);
+
+- if ((sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
+- sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
+- addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
++ if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) &&
++ (sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
++ sdiodev->func[1]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {
+ rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
+ if (rev >= 2) {
+ val &= ~CID_ID_MASK;
+ val |= BRCM_CC_4339_CHIP_ID;
+ }
+ }
++
+ return val;
+ }
+
--- /dev/null
+From 00eb62cfc5f806b003fe5d54c8b5fe9a9665482f Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:13 +0100
+Subject: [PATCH] brcmfmac: Replace function index with function pointer
+
+In preparation for removing the function array, remove all code that
+refers to function by index and replace with pointers to the function
+itself.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+[arend: replace BUG() with WARN() macro]
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 85 ++++++++++++----------
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 15 ++--
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 6 +-
+ 3 files changed, 56 insertions(+), 50 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -291,8 +291,9 @@ out:
+ *ret = retval;
+ }
+
+-static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
+- u32 addr, struct sk_buff *pkt)
++static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev,
++ struct sdio_func *func, u32 addr,
++ struct sk_buff *pkt)
+ {
+ unsigned int req_sz;
+ int err;
+@@ -301,13 +302,19 @@ static int brcmf_sdiod_buff_read(struct
+ req_sz = pkt->len + 3;
+ req_sz &= (uint)~3;
+
+- if (fn == 1)
+- err = sdio_memcpy_fromio(sdiodev->func[fn],
+- ((u8 *)(pkt->data)), addr, req_sz);
+- else
+- /* function 2 read is FIFO operation */
+- err = sdio_readsb(sdiodev->func[fn],
+- ((u8 *)(pkt->data)), addr, req_sz);
++ switch (func->num) {
++ case 1:
++ err = sdio_memcpy_fromio(func, ((u8 *)(pkt->data)), addr,
++ req_sz);
++ break;
++ case 2:
++ err = sdio_readsb(func, ((u8 *)(pkt->data)), addr, req_sz);
++ break;
++ default:
++ /* bail out as things are really fishy here */
++ WARN(1, "invalid sdio function number: %d\n", func->num);
++ err = -ENOMEDIUM;
++ };
+
+ if (err == -ENOMEDIUM)
+ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+@@ -315,8 +322,9 @@ static int brcmf_sdiod_buff_read(struct
+ return err;
+ }
+
+-static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
+- u32 addr, struct sk_buff *pkt)
++static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev,
++ struct sdio_func *func, u32 addr,
++ struct sk_buff *pkt)
+ {
+ unsigned int req_sz;
+ int err;
+@@ -325,8 +333,7 @@ static int brcmf_sdiod_buff_write(struct
+ req_sz = pkt->len + 3;
+ req_sz &= (uint)~3;
+
+- err = sdio_memcpy_toio(sdiodev->func[fn], addr,
+- ((u8 *)(pkt->data)), req_sz);
++ err = sdio_memcpy_toio(func, addr, ((u8 *)(pkt->data)), req_sz);
+
+ if (err == -ENOMEDIUM)
+ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+@@ -337,7 +344,7 @@ static int brcmf_sdiod_buff_write(struct
+ /**
+ * brcmf_sdiod_sglist_rw - SDIO interface function for block data access
+ * @sdiodev: brcmfmac sdio device
+- * @fn: SDIO function number
++ * @func: SDIO function
+ * @write: direction flag
+ * @addr: dongle memory address as source/destination
+ * @pkt: skb pointer
+@@ -346,7 +353,8 @@ static int brcmf_sdiod_buff_write(struct
+ * stack for block data access. It assumes that the skb passed down by the
+ * caller has already been padded and aligned.
+ */
+-static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
++static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev,
++ struct sdio_func *func,
+ bool write, u32 addr,
+ struct sk_buff_head *pktlist)
+ {
+@@ -372,7 +380,7 @@ static int brcmf_sdiod_sglist_rw(struct
+ req_sz = 0;
+ skb_queue_walk(pktlist, pkt_next)
+ req_sz += pkt_next->len;
+- req_sz = ALIGN(req_sz, sdiodev->func[fn]->cur_blksize);
++ req_sz = ALIGN(req_sz, func->cur_blksize);
+ while (req_sz > PAGE_SIZE) {
+ pkt_next = brcmu_pkt_buf_get_skb(PAGE_SIZE);
+ if (pkt_next == NULL) {
+@@ -391,7 +399,7 @@ static int brcmf_sdiod_sglist_rw(struct
+ target_list = &local_list;
+ }
+
+- func_blk_sz = sdiodev->func[fn]->cur_blksize;
++ func_blk_sz = func->cur_blksize;
+ max_req_sz = sdiodev->max_request_size;
+ max_seg_cnt = min_t(unsigned short, sdiodev->max_segment_count,
+ target_list->qlen);
+@@ -408,10 +416,10 @@ static int brcmf_sdiod_sglist_rw(struct
+ mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ mmc_cmd.opcode = SD_IO_RW_EXTENDED;
+ mmc_cmd.arg = write ? 1<<31 : 0; /* write flag */
+- mmc_cmd.arg |= (fn & 0x7) << 28; /* SDIO func num */
+- mmc_cmd.arg |= 1<<27; /* block mode */
++ mmc_cmd.arg |= (func->num & 0x7) << 28; /* SDIO func num */
++ mmc_cmd.arg |= 1 << 27; /* block mode */
+ /* for function 1 the addr will be incremented */
+- mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
++ mmc_cmd.arg |= (func->num == 1) ? 1 << 26 : 0;
+ mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+ mmc_req.cmd = &mmc_cmd;
+ mmc_req.data = &mmc_dat;
+@@ -457,11 +465,11 @@ static int brcmf_sdiod_sglist_rw(struct
+ mmc_cmd.arg |= (addr & 0x1FFFF) << 9; /* address */
+ mmc_cmd.arg |= mmc_dat.blocks & 0x1FF; /* block count */
+ /* incrementing addr for function 1 */
+- if (fn == 1)
++ if (func->num == 1)
+ addr += req_sz;
+
+- mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
+- mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
++ mmc_set_data_timeout(&mmc_dat, func->card);
++ mmc_wait_for_req(func->card->host, &mmc_req);
+
+ ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
+ if (ret == -ENOMEDIUM) {
+@@ -541,7 +549,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sd
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
++ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr, pkt);
+
+ done:
+ return err;
+@@ -566,13 +574,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ if (pktq->qlen == 1)
+- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
++ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
+ pktq->next);
+ else if (!sdiodev->sg_support) {
+ glom_skb = brcmu_pkt_buf_get_skb(totlen);
+ if (!glom_skb)
+ return -ENOMEM;
+- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
++ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
+ glom_skb);
+ if (err)
+ goto done;
+@@ -582,8 +590,8 @@ int brcmf_sdiod_recv_chain(struct brcmf_
+ skb_pull(glom_skb, skb->len);
+ }
+ } else
+- err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
+- pktq);
++ err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], false,
++ addr, pktq);
+
+ done:
+ brcmu_pkt_buf_free_skb(glom_skb);
+@@ -614,7 +622,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sd
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ if (!err)
+- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
++ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2], addr,
++ mypkt);
+
+ brcmu_pkt_buf_free_skb(mypkt);
+
+@@ -639,14 +648,14 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd
+
+ if (pktq->qlen == 1 || !sdiodev->sg_support) {
+ skb_queue_walk(pktq, skb) {
+- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
++ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2],
+ addr, skb);
+ if (err)
+ break;
+ }
+ } else {
+- err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
+- pktq);
++ err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], true,
++ addr, pktq);
+ }
+
+ return err;
+@@ -696,10 +705,10 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev
+
+ if (write) {
+ memcpy(pkt->data, data, dsize);
+- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1,
++ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[1],
+ sdaddr, pkt);
+ } else {
+- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1,
++ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[1],
+ sdaddr, pkt);
+ }
+
+@@ -728,12 +737,12 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev
+ return err;
+ }
+
+-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
++int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func)
+ {
+ brcmf_dbg(SDIO, "Enter\n");
+
+ /* Issue abort cmd52 command through F0 */
+- brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
++ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, func->num, NULL);
+
+ brcmf_dbg(SDIO, "Exit\n");
+ return 0;
+@@ -1105,7 +1114,7 @@ static int brcmf_ops_sdio_suspend(struct
+
+ func = container_of(dev, struct sdio_func, dev);
+ brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
+- if (func->num != SDIO_FUNC_1)
++ if (func->num != 1)
+ return 0;
+
+
+@@ -1134,7 +1143,7 @@ static int brcmf_ops_sdio_resume(struct
+ struct sdio_func *func = container_of(dev, struct sdio_func, dev);
+
+ brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
+- if (func->num != SDIO_FUNC_2)
++ if (func->num != 2)
+ return 0;
+
+ brcmf_sdiod_freezer_off(sdiodev);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -1157,7 +1157,7 @@ static void brcmf_sdio_rxfail(struct brc
+ rtx ? ", send NAK" : "");
+
+ if (abort)
+- brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
++ brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func[2]);
+
+ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
+ &err);
+@@ -1209,7 +1209,7 @@ static void brcmf_sdio_txfail(struct brc
+ brcmf_err("sdio error, abort command and terminate frame\n");
+ bus->sdcnt.tx_sderrs++;
+
+- brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
++ brcmf_sdiod_abort(sdiodev, sdiodev->func[2]);
+ brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
+ bus->sdcnt.f1regdata++;
+
+@@ -2072,7 +2072,7 @@ static int brcmf_sdio_txpkt_prep_sg(stru
+ int ntail, ret;
+
+ sdiodev = bus->sdiodev;
+- blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize;
++ blksize = sdiodev->func[2]->cur_blksize;
+ /* sg entry alignment should be a divisor of block size */
+ WARN_ON(blksize % bus->sgentry_align);
+
+@@ -2441,7 +2441,7 @@ static void brcmf_sdio_bus_stop(struct d
+
+ /* Turn off the bus (F2), free any pending packets */
+ brcmf_dbg(INTR, "disable SDIO interrupts\n");
+- sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
++ sdio_disable_func(sdiodev->func[2]);
+
+ /* Clear any pending interrupts now that F2 is disabled */
+ brcmf_sdiod_writel(sdiodev, core->base + SD_REG(intstatus),
+@@ -4066,8 +4066,7 @@ static void brcmf_sdio_firmware_callback
+ brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata),
+ SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
+
+- err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
+-
++ err = sdio_enable_func(sdiodev->func[2]);
+
+ brcmf_dbg(INFO, "enable F2: err=%d\n", err);
+
+@@ -4082,7 +4081,7 @@ static void brcmf_sdio_firmware_callback
+ brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+ } else {
+ /* Disable F2 again */
+- sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
++ sdio_disable_func(sdiodev->func[2]);
+ goto release;
+ }
+
+@@ -4219,7 +4218,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ sdio_claim_host(bus->sdiodev->func[1]);
+
+ /* Disable F2 to clear any intermediate frame state on the dongle */
+- sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
++ sdio_disable_func(bus->sdiodev->func[2]);
+
+ bus->rxflow = false;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -45,9 +45,6 @@
+ #define REG_F0_REG_MASK 0x7FF
+ #define REG_F1_MISC_MASK 0x1FFFF
+
+-/* as of sdiod rev 0, supports 3 functions */
+-#define SBSDIO_NUM_FUNCTION 3
+-
+ /* function 0 vendor specific CCCR registers */
+
+ #define SDIO_CCCR_BRCM_CARDCAP 0xf0
+@@ -350,7 +347,8 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_
+ u8 *data, uint size);
+
+ /* Issue an abort to the specified function */
+-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn);
++int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
++
+ void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
+ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
+ enum brcmf_sdiod_state state);
--- /dev/null
+From 9c3438ed215adba7025268ee1f0b6f7a2af12316 Mon Sep 17 00:00:00 2001
+From: Ian Molton <ian@mnementh.co.uk>
+Date: Tue, 19 Dec 2017 13:47:14 +0100
+Subject: [PATCH] brcmfmac: Clean up interrupt macros
+
+Make it more obvious that this code acually enables interrupts, and
+provide nice definitions for the bits in the register.
+
+Signed-off-by: Ian Molton <ian@mnementh.co.uk>
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 3 ++-
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 8 +++++---
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -149,7 +149,8 @@ int brcmf_sdiod_intr_register(struct brc
+
+ /* must configure SDIO_CCCR_IENx to enable irq */
+ data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
+- data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
++ data |= SDIO_CCCR_IEN_FUNC1 | SDIO_CCCR_IEN_FUNC2 |
++ SDIO_CCCR_IEN_FUNC0;
+ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
+
+ /* redirect, configure and enable io for interrupt signal */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -24,9 +24,6 @@
+ /* Maximum number of I/O funcs */
+ #define NUM_SDIO_FUNCS 3
+
+-#define SDIO_FUNC_1 1
+-#define SDIO_FUNC_2 2
+-
+ #define SDIOD_FBR_SIZE 0x100
+
+ /* io_en */
+@@ -52,6 +49,11 @@
+ #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT BIT(2)
+ #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC BIT(3)
+
++/* Interrupt enable bits for each function */
++#define SDIO_CCCR_IEN_FUNC0 BIT(0)
++#define SDIO_CCCR_IEN_FUNC1 BIT(1)
++#define SDIO_CCCR_IEN_FUNC2 BIT(2)
++
+ #define SDIO_CCCR_BRCM_CARDCTRL 0xf1
+ #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET BIT(1)
+
projects / openwrt / staging / mkresin.git / commitdiff