kirkwood: add diag LEDs for ZyXEL NSA325

This device has had no diag LEDs set up so far, so let's just
add them.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch
new file mode 100644 (file)
index 0000000..5d1963b
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch
@@ -0,0 +1,30 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+@@ -18,6 +18,13 @@
+       model = "ZyXEL NSA325";
+       compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+ 
++      aliases {
++              led-boot = &led_green_sys;
++              led-failsafe = &led_orange_sys;
++              led-running = &led_green_sys;
++              led-upgrade = &led_orange_sys;
++      };
++
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;
+@@ -165,11 +172,11 @@
+                            &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+               pinctrl-names = "default";
+ 
+-              green-sys {
++              led_green_sys: green-sys {
+                       label = "nsa325:green:sys";
+                       gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+               };
+-              orange-sys {
++              led_orange_sys: orange-sys {
+                       label = "nsa325:orange:sys";
+                       gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+               };

diff --git a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
new file mode 100644 (file)
index 0000000..aefb5c3
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
@@ -0,0 +1,30 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+@@ -15,6 +15,13 @@
+       model = "ZyXEL NSA325";
+       compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+ 
++      aliases {
++              led-boot = &led_green_sys;
++              led-failsafe = &led_orange_sys;
++              led-running = &led_green_sys;
++              led-upgrade = &led_orange_sys;
++      };
++
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;
+@@ -162,11 +169,11 @@
+                            &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+               pinctrl-names = "default";
+ 
+-              green-sys {
++              led_green_sys: green-sys {
+                       label = "nsa325:green:sys";
+                       gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+               };
+-              orange-sys {
++              led_orange_sys: orange-sys {
+                       label = "nsa325:orange:sys";
+                       gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+               };