brcm2708-gpu-fw: add fw required for camera module

To be able to use the camera module, start_x=1 has to be set in
config.txt. This will cause the bootloader to load the GPU firmware that
contain the extra video codecs. Install these firmware files.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

diff --git a/package/kernel/brcm2708-gpu-fw/Makefile b/package/kernel/brcm2708-gpu-fw/Makefile
index e98add03bd0b76b9cadb656a7b38f8fa93260658..2d6dc3d81c4c1651346acede87833100ad43fe1c 100644 (file)
--- a/package/kernel/brcm2708-gpu-fw/Makefile
+++ b/package/kernel/brcm2708-gpu-fw/Makefile
@@ -53,6 +53,14 @@ define Download/fixup_cd_dat
 endef
 $(eval $(call Download,fixup_cd_dat))
 
+define Download/fixup_x_dat
+  FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
+  URL:=$(RPI_FIRMWARE_URL)
+  HASH:=ec99af78227d9ffa2e46ab80a96aa762187467fe33876e4d8085377e7d0f76c2
+  URL_FILE:=fixup_x.dat
+endef
+$(eval $(call Download,fixup_x_dat))
+
 define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
@@ -69,6 +77,14 @@ define Download/start_cd_elf
 endef
 $(eval $(call Download,start_cd_elf))
 
+define Download/start_x_elf
+  FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
+  URL:=$(RPI_FIRMWARE_URL)
+  HASH:=4fa98ee8eca7427aa013c1ad4a70d7b4cd01dcc08264307d1cb62f7c9ddfeed9
+  URL_FILE:=start_x.elf
+endef
+$(eval $(call Download,start_x_elf))
+
 define Package/brcm2708-gpu-fw
   SECTION:=boot
   CATEGORY:=Boot Loaders
@@ -88,8 +104,10 @@ define Build/Prepare
        cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-bootcode.bin $(PKG_BUILD_DIR)/bootcode.bin
        cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup.dat $(PKG_BUILD_DIR)/fixup.dat
        cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup_cd.dat $(PKG_BUILD_DIR)/fixup_cd.dat
+       cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup_x.dat $(PKG_BUILD_DIR)/fixup_x.dat
        cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start.elf $(PKG_BUILD_DIR)/start.elf
        cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start_cd.elf $(PKG_BUILD_DIR)/start_cd.elf
+       cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start_x.elf $(PKG_BUILD_DIR)/start_x.elf
 endef
 
 define Build/Compile
@@ -105,8 +123,10 @@ define Build/InstallDev
        $(CP) $(PKG_BUILD_DIR)/LICENCE.broadcom $(KERNEL_BUILD_DIR)
        $(CP) $(PKG_BUILD_DIR)/start.elf $(KERNEL_BUILD_DIR)
        $(CP) $(PKG_BUILD_DIR)/start_cd.elf $(KERNEL_BUILD_DIR)
+       $(CP) $(PKG_BUILD_DIR)/start_x.elf $(KERNEL_BUILD_DIR)
        $(CP) $(PKG_BUILD_DIR)/fixup.dat $(KERNEL_BUILD_DIR)
        $(CP) $(PKG_BUILD_DIR)/fixup_cd.dat $(KERNEL_BUILD_DIR)
+       $(CP) $(PKG_BUILD_DIR)/fixup_x.dat $(KERNEL_BUILD_DIR)
 endef
 
 $(eval $(call BuildPackage,brcm2708-gpu-fw))

diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile
index 3272a2cf5aef10aa13a53d9794547441db687b9b..b9dfa8f21fad82293e3686cbc10fe986858447c8 100644 (file)
--- a/target/linux/brcm2708/image/Makefile
+++ b/target/linux/brcm2708/image/Makefile
@@ -29,8 +29,10 @@ define Build/boot-img
        mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
        mcopy -i $@.boot $(KDIR)/start.elf ::
        mcopy -i $@.boot $(KDIR)/start_cd.elf ::
+       mcopy -i $@.boot $(KDIR)/start_x.elf ::
        mcopy -i $@.boot $(KDIR)/fixup.dat ::
        mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
+       mcopy -i $@.boot $(KDIR)/fixup_x.dat ::
        mcopy -i $@.boot cmdline.txt ::
        mcopy -i $@.boot config.txt ::
        mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)