Added some buffalo docs.
authorImre Kaloz <kaloz@openwrt.org>
Thu, 31 Mar 2005 21:25:39 +0000 (21:25 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Thu, 31 Mar 2005 21:25:39 +0000 (21:25 +0000)
SVN-Revision: 492

openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wbr2-g54/info.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wla2-g54l/info.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt [new file with mode: 0644]
openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt [new file with mode: 0644]

diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/cpuinfo.txt
new file mode 100644 (file)
index 0000000..335b012
--- /dev/null
@@ -0,0 +1,12 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.47
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
+
diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..4fc7384
--- /dev/null
@@ -0,0 +1,89 @@
+PU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Sun Mar 27 17:16:55 CEST 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 14028k/16384k available (1493k kernel code, 2356k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+PPP generic driver version 2.4.2
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+ Amd/Fujitsu Extended Query Table v1.3 at 0x0040
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+cramfs: wrong magic
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+device eth1 entered promiscuous mode
+br0: port 2(eth1) entering learning state
+br0: port 1(vlan0) entering learning state
+br0: port 2(eth1) entering forwarding state
+br0: topology change detected, propagating
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
+vlan1: add 01:00:5e:00:00:01 mcast address to master interface
diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/info.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/info.txt
new file mode 100644 (file)
index 0000000..60f1523
--- /dev/null
@@ -0,0 +1,19 @@
+Buffalo WBR2-G54
+
+Online Description from Buffalo:
+http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wbr2-g54
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller
+serial port possible
+JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
+
diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt
new file mode 100644 (file)
index 0000000..df73509
--- /dev/null
@@ -0,0 +1,100 @@
+wl0_net_mode=mixed
+os_ram_addr=80001000
+wl0_frameburst=off
+boardrev=0x10
+il0macaddr=00:0D:0B:1A:93:8D
+et0macaddr=00:0D:0B:1A:93:8C
+boot_wait=on
+watchdog=1000
+wl0_infra=1
+wl0_country_code=AU
+et0mdcport=0
+pmon_ver=CFE 3.51.21.10
+wl0_ifname=eth1
+gpio2=adm_eecs
+gpio3=adm_eesk
+gpio4=adm_eedi
+gpio5=adm_rc
+vlan0ports=1 2 3 4 5*
+wl0_mode=ap
+wl0_ap_isolate=0
+os_flash_addr=bfc40000
+wl0_gmode=6
+sromrev=2
+boardtype=0x0101
+lan_netmask=255.255.255.0
+wl0_dtim=1
+wl0_ssid=000D0B1A938D
+wl0_key1=
+wl0id=0x4320
+wl0_key2=
+wl0_key3=
+wl0_key4=
+pmon_date=Feb 20 2004 16:36:31
+ag0=255
+buffalo_id=29bb0332
+wl0_plcphdr=long
+wl0_rate=0
+wl0_closed=0
+wl0_macmode=disabled
+wl0gpio0=2
+wl0_radioids=BCM2050
+wl0gpio1=0
+wl0_phytype=g
+wl0gpio2=0
+wl0_lazywds=1
+wl0gpio3=0
+wl0gpio4=0
+wl0gpio5=0
+boardflags2=0
+wl0_afterburner=auto
+wl0_antdiv=-1
+wl0_wpa_psk=
+wl0_unit=0
+wl_country_code=AU
+memc_config=0x00048540
+pa0itssit=62
+wl0_wds=
+cctl=0
+wl0_radius_port=1812
+wl0_auth=0
+wl0_radius_ipaddr=
+pa0maxpwr=60
+clkfreq=200
+lan_ipaddr=192.168.11.1
+vlan1hwname=et0
+aa0=3
+wl0_phytypes=g
+wl0_frag=2346
+wl0_wep=disabled
+sdram_config=0x0032
+wl0_country=
+vlan1ports=0 5
+scratch=a0180000
+ccode=0
+wl0_rateset=default
+boardflags=0x0188
+sdram_refresh=0x0000
+sdram_ncdl=0x23
+wl0_rts=2347
+wl0_wpa_gtk_rekey=3600
+wl0_key=1
+et0phyaddr=30
+wl0_radio=1
+wl0_bcn=100
+wl0_hwaddr=00:0D:0B:1A:93:8D
+wl0_gmode_protection=auto
+pa0b0=0x1136
+wl0_maclist=
+pa0b1=0xfb93
+pa0b2=0xfea5
+sdram_init=0x0000
+vlan0hwname=et0
+dl_ram_addr=a0001000
+wl0_radius_key=
+wl0_corerev=7
+wl0_channel=11
+wl0_auth_mode=open
+wl0_crypto=tkip
+boardnum=00
+
diff --git a/openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt b/openwrt/docs/hardware/buffalo/wbr2-g54/pci.txt
new file mode 100644 (file)
index 0000000..5bf36ab
--- /dev/null
@@ -0,0 +1,38 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].
+
diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/cpuinfo.txt
new file mode 100644 (file)
index 0000000..1e91441
--- /dev/null
@@ -0,0 +1,11 @@
+system type             : Broadcom BCM947XX
+processor               : 0
+cpu model               : BCM3302 V0.7
+BogoMIPS                : 199.47
+wait instruction        : no
+microsecond timers      : yes
+tlb_entries             : 32
+extra interrupt vector  : no
+hardware watchpoint     : no
+VCED exceptions         : not available
+VCEI exceptions         : not available
diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt
new file mode 100644 (file)
index 0000000..a0c93c2
--- /dev/null
@@ -0,0 +1,85 @@
+CPU revision is: 00029007
+Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
+Primary data cache 4kB, 2-way, linesize 16 bytes.
+Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
+Determined physical RAM map:
+ memory: 01000000 @ 00000000 (usable)
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
+CPU: BCM4712 rev 1 at 200 MHz
+Using 100.000 MHz high precision timer.
+Calibrating delay loop... 199.47 BogoMIPS
+Memory: 14096k/16384k available (1463k kernel code, 2288k reserved, 104k data, 88k init, 0k highmem)
+Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
+Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
+Mount cache hash table entries: 512 (order: 0, 4096 bytes)
+Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Checking for 'wait' instruction...  unavailable.
+POSIX conformance testing by UNIFIX
+PCI: Disabled
+PCI: Fixing up bus 0
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd
+devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x1
+JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
+Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
+pty: 256 Unix98 ptys configured
+Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xb8000300 (irq = 3) is a 16550A
+ttyS01 at 0xb8000400 (irq = 0) is a 16550A
+Software Watchdog Timer: 0.05, timer margin: 60 sec
+loop: loaded (max 8 devices)
+Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
+Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
+ Amd/Fujitsu Extended Query Table v1.0 at 0x0040
+number of CFI chips: 1
+cfi_cmdset_0002: Disabling fast programming due to code brokenness.
+Flash device: 0x400000 at 0x1c000000
+Creating 4 MTD partitions on "Physically mapped flash":
+0x00000000-0x00040000 : "pmon"
+0x00040000-0x003f0000 : "linux"
+0x000f0000-0x003f0000 : "rootfs"
+0x003f0000-0x00400000 : "nvram"
+sflash: found no supported devices
+Initializing Cryptographic API
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP, IGMP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 2048)
+ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
+ip_tables: (C) 2000-2002 Netfilter core team
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+NET4: Ethernet Bridge 008 for NET4.0
+Bridge firewalling registered
+802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
+All bugs added by David S. Miller <davem@redhat.com>
+VFS: Mounted root (jffs2 filesystem) readonly.
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k freed
+Algorithmics/MIPS FPU Emulator v1.5
+diag boardtype: 00000101
+using v2 hardware
+jffs2.bbc: SIZE compression mode activated.
+PCI: Setting latency timer of device 00:02.0 to 64
+5325E   phy=FFFFFFFF
+5325E   VLAN programming for BCM5325E-MDIO I/F switch
+eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
+PCI: Setting latency timer of device 00:01.0 to 64
+eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
+device eth0 entered promiscuous mode
+vlan0: add 01:00:5e:00:00:01 mcast address to master interface
+br0: port 1(vlan0) entering learning state
+br0: port 1(vlan0) entering forwarding state
+br0: topology change detected, propagating
diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/info.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/info.txt
new file mode 100644 (file)
index 0000000..b979cdd
--- /dev/null
@@ -0,0 +1,18 @@
+Buffalo WLA2-G54L
+
+Online Description from Buffalo:
+http://www.buffalotech.co.uk/webcontent/products/wireless/index.php?cat=G54&itemID=wla2-g54l
+
+CPU: BCM4712 at 200 MHz
+RAM: 16 MB
+Flash: 4 MB
+1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
+1 Broadcom BCM4320 802.11 Wireless Controller
+serial port possible
+no JTAG interface
+
+List of files:
+nvram.txt: contents of NVRAM after OpenWRT upgrade
+cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
+pci.txt:  contents of /proc/pci (2.4.29)
+dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/nvram.txt
new file mode 100644 (file)
index 0000000..8545f1a
--- /dev/null
@@ -0,0 +1,455 @@
+ni_netmask=255.255.255.0
+wl_radius_port=1812
+pppoe_demand_select_1=1
+pppoe_demand_select_2=1
+pppoe_demand_select_3=1
+os_ram_addr=80001000
+dhcp_except=
+pppoe_demand_select_4=1
+wl0_net_mode=mixed
+log_send_forward=0
+wl0_frameburst=on
+log_send_enable=0
+il0macaddr=00:0D:0B:41:8A:C3
+boardrev=0x10
+filter_udp=
+ntp_interval=24
+forward_ipmasq_time=5
+hostname=
+et0macaddr=00:0D:0B:41:8A:C2
+pppoe_demand_1=0
+wl_gmode_protection_cts=1
+pppoe_demand_2=0
+wl_pwrout_per=100
+wep_ascii_select1=1
+log_dhcp_cli=1
+pppoe_demand_3=0
+d11b_rateset=default
+d11a_channel=64
+d11g_mode=5
+wep_ascii_select2=1
+pppoe_demand_4=0
+wl0_wep_buf=
+watchdog=1000
+boot_wait=on
+wep_ascii_select3=1
+wep_ascii_select4=1
+wl0_macmode1=disabled
+ini_ipaddr=192.168.11.100
+wl0_infra=1
+et0mdcport=0
+wl0_country_code=AU
+d11b_bcn=100
+pppoe_keepalive=1
+log_send_config=1
+pppoe_label_1=
+pppoe_label_2=
+pmon_ver=CFE 3.51.21.10
+pppoe_label_3=
+d11g_protection=0
+restore_defaults=0
+attack_spoofing=0
+pppoe_label_4=
+wan_lease=864000
+d11b_frag=2346
+d11g_dtim=1
+filter_melco=
+http_wanport=
+wl_radius_ipaddr=
+pppoe_label=
+pppoe_demand_select=1
+wan_hwaddr_select_def=1
+pppoe_mtu_1=1454
+wl0_ifname=eth1
+pppoe_mtu_2=1454
+timer_interval=3600
+pppoe_mtu_3=1454
+gpio2=adm_eecs
+filter_lansetup=0
+pppoe_mtu_4=1454
+gpio3=adm_eesk
+gpio4=adm_eedi
+dhcp_manual=
+ap_name=AP000D0B418AC2
+pppoe_mtu=1454
+vlan0ports=1 2 3 4 5*
+gpio5=adm_rc
+log_disp_name=NEWEST
+route_pppoe=
+filter_tcp=
+pppoe_keepalive_1=1
+pppoe_keepalive_2=1
+log_attack=0
+pppoe_keepalive_3=1
+wl0_mode=ap
+dhcp_start=192.168.11.2
+pppoe_keepalive_4=1
+wl0_ap_isolate=0
+httpc_auth_ipaddr_tmp=
+dhcp_end=192.168.11.17
+log_send_dhcp_serv=0
+os_flash_addr=bfc40000
+domain=
+log_send_dhcp_cli=1
+sromrev=2
+ap_wl_version=
+wl0_gmode=5
+httpc_login_off_time=5
+pppoe_username_1=
+boardtype=0x0101
+pppoe_username_2=
+attack_cm_addr=
+pppoe_username_3=
+wl_gmode=5
+pppoe_username_4=
+stats_server=
+log_pppoe=0
+static_route=
+d11g_rate=0
+log_ntpcli=1
+lan_netmask=255.255.255.0
+log_send_pppoe=0
+attack_select=0
+wl0_wep_last=
+http_username=root
+wl0_ssid=000D0B418AC2
+wl0_dtim=1
+pmon_upgrade=0
+http_lanport=80
+wl_plcphdr=long
+wl_macmode=disabled
+lcp_echo_failure_1=6
+wan_hwname=
+log_disp_page=0
+lcp_echo_failure_2=6
+wl0id=0x4320
+wan_netmask=255.255.255.0
+d11a_dtim=1
+lcp_echo_failure_3=6
+wl_phytype=g
+wl0_key1=
+wl_lazywds=0
+lcp_echo_failure_4=6
+wl0_key2=
+wl0_key3=
+wl0_key4=
+wl_auth_mode=disabled
+log_etc=1
+pppoe_mru_1=1454
+pppoe_mru_2=1454
+dhcp_domain_select=NONE
+attack_mail_pop_addr=
+pppoe_mru_3=1454
+d11g_rts=2347
+pppoe_mru_4=1454
+pmon_date=Mar 12 2004 14:29:18
+ag0=255
+http_passwd=
+wl_wpa_psk=
+d11b_channel=11
+melco_web_carrier_select=
+wl_wds_list=
+log_level_notice=1
+log_power=1
+lan_stp=0
+forward_melco=
+dhcp_dns_ip1=
+log_wired=1
+wan_ipaddr_bak=
+buffalo_id=29129
+wl_mode=ap
+dhcp_dns_ip2=
+log_send_power=1
+log_send_wired=1
+melco_web_lan=0
+wl0_closed=0
+wl0_rate=0
+wl0_plcphdr=long
+wl0gpio0=2
+wl_wpa_gtk_rekey=0
+d11g_rateset=default
+wl0_macmode=disabled
+wl0gpio1=0
+wl0_radioids=BCM2050
+wl0gpio2=0
+wl0_phytype=g
+wl0gpio3=0
+wl0_lazywds=0
+wl0gpio4=0
+dhcp_gw_select=AP
+wl0gpio5=0
+pppoe_disable_1=0
+boardflags2=0
+pppoe_disable_2=0
+log_level_err=1
+pppoe_disable_3=0
+wl0_afterburner=auto
+d11a_rate=0
+log_filter=1
+pppoe_disable_4=0
+lan_hwaddr=
+wl0_antdiv=-1
+asts_data=
+wl_ssid=000D0B418AC2
+wl_dtim=1
+wl0_wpa_psk=
+d11g_bcn=100
+time_zone_melco=GMT+6
+log_send_level_notice=1
+pppoe_hostuniq_1=
+httpc_auth_ipaddr=
+pppoe_hostuniq_2=
+wl0_mac_list=
+dhcp_wins=
+pppoe_hostuniq_3=
+os_server=
+ap_fw_code=00
+pppoe_hostuniq_4=
+wan_proto=dhcp
+wl_key1=
+wl_key2=
+wl_key3=
+wl0_unit=0
+wl_key4=
+wl_country_code=AU
+memc_config=0x0004854a
+wl_hwaddr=00:0D:0B:41:8A:C3
+pppoe_session_default=-1
+pppoe_manual=0
+dhcp_wins_select=NONE
+pa0itssit=62
+flash_recover=1
+wl_txpwr=22
+wl_mac_melco=
+ntp_enable=0
+time_backup=2003.01.01-00:00:00
+melco_web_wan=0
+attack_threshold=5
+pppoe_passwd_confirm=
+dhcp_range=16
+log_send_etc=1
+d11g_frag=2346
+wl0_wds=
+wl_rate=0
+pppoe_incom_1=0
+cctl=0
+log_level=1
+d11a_rts=2347
+filter_ident=0
+pppoe_incom_2=0
+ntp_server=
+pppoe_incom_3=0
+wan_hwaddr=
+pppoe_incom_4=0
+lan_ifnames=eth0 eth2
+wl_limit_select=0
+pppoe_ifname=
+filter_wdssetup=0
+pppoe_auth_1=AUTO
+wl0_auth=0
+wl0_mac_deny=
+wl0_radius_port=1812
+pppoe_auth_2=AUTO
+pppoe_auth_3=AUTO
+wl0_radius_ipaddr=
+pppoe_service=
+pppoe_auth_4=AUTO
+wl_country=Worldwide
+pa0maxpwr=60
+attack_synfd_iplimit=5
+lcp_echo_interval=60
+wl_rateset=default
+log_send_attack=0
+pppoe_retransmit_1=4
+http_passwd_confirm=
+pppoe_retransmit_2=4
+pppoe_retransmit_3=4
+dhcp_start_melco=192.168.11.2
+pppoe_retransmit_4=4
+lan_ipaddr=192.168.11.100
+clkfreq=200
+os_name=linux
+lan_proto=static
+wl_radius_key=
+aa0=3
+vlan1hwname=et0
+dns_manual0=
+wl_unit=0
+filter_wanping=1
+dns_manual1=
+wan_connecttime=
+wl0_phytypes=g
+d11a_bcn=100
+d11g_channel=11
+wl0_wep=off
+wl0_frag=2346
+wins=
+pppoe_incom=0
+pppoe_passwd=
+pppoe_registered_1=0
+sdram_config=0x0032
+filter_nbt=0
+log_send_ntpcli=1
+melco_web_select=
+pppoe_registered_2=0
+pppoe_registered_3=0
+wl0_country=Worldwide
+vlan1ports=0 5
+dmz_ipaddr=
+pppoe_registered_4=0
+wl_wds=
+scratch=a0180000
+dns=
+d11a_frag=2346
+ccode=0
+filter_ip=
+melco_web_setuzoku=0
+wl0_rateset=default
+attack_mail_to=
+pppoe_idletime_1=20
+log_firewall=1
+pppoe_idletime_2=20
+lcp_echo_failure=6
+wl0_wep_bit=64
+pppoe_idletime=20
+pppoe_idletime_3=20
+log_server=
+asts_enable=1
+pppoe_idletime_4=20
+lan_ifname=br0
+attack_mail_pop_pass=
+boardflags=0x0188
+rip_wan_recv=0
+sdram_refresh=0x0000
+log_config=1
+wl0_afterburner_override=-1
+dhcp_domain=
+wl_auth=0
+sdram_ncdl=0x20422
+filter_mac=
+wl_frameburst=on
+attack_cm_select=0
+filter_wlansetup=0
+log_forward=0
+wan_ipaddr=1.1.1.1
+forward_enable=1
+asts_sta_data=
+wl0_passphrase=
+gateway_manual=
+lcp_echo_interval_1=60
+attack_mail_select=0
+attack_synfd_limit=0
+lcp_echo_interval_2=60
+wl0_rts=2347
+wl_ssid_mac=1
+pppoe_passwd_1=
+lcp_echo_interval_3=60
+pppoe_passwd_2=
+lcp_echo_interval_4=60
+wl_ifname=eth2
+wl_wep=off
+pppoe_passwd_3=
+d11b_dtim=1
+d11b_plcphdr=long
+dhcp_gw_ip=
+pppoe_passwd_4=
+os_version=3.60.9.0
+wan_speed=AUTO
+pppoe_username=
+wl_gmode_protection=auto
+gateway=0.0.0.0
+asts_deny_mac=
+wl0_wpa_gtk_rekey=0
+log_dhcp_serv=0
+wl_frag=2346
+httpc_ipaddr=
+wl0_key=1
+log_send_filter=1
+wl0_active_mac=
+wl_maclist=
+et0phyaddr=30
+console_loglevel=1
+time_zone=PST8PDT
+d11a_rateset=default
+d11g_shortslot_restrict=0
+wl_ssid_input=
+wan_mdi=0
+pppoe_ac_name=
+pppoe_passwd_confirm_1=
+log_send_level_err=1
+log_send_firewall=1
+pppoe_passwd_confirm_2=
+wan_ifname=
+attack_mail_from=
+pppoe_disable=0
+pppoe_passwd_confirm_3=
+d11a_hwaddr=
+rip_lan_recv=3
+ap_version=BUFFALO Ver.1.00
+pppoe_passwd_confirm_4=
+wl_mac=
+pppoe_service_1=
+wl0_radio=1
+pppoe_service_2=
+wl_channel=11
+d11g_hwaddr=
+pppoe_service_3=
+pppoe_service_4=
+wl0_bcn=100
+dhcp_dns_select=AP
+wl_wds_enable=0
+forward_udp=
+wl_radio=1
+wl0_hwaddr=00:0D:0B:41:8A:C3
+d11b_rate=0
+forward_group=
+rip_wan_send=0
+ap_hw_code=00
+wl0_wep_gen=
+pa0b0=0x1136
+dhcp_lease_time=48
+log_wlcli=1
+wl0_gmode_protection=auto
+pa0b1=0xfb93
+attack_dos_rules=0
+wl0_maclist=
+pa0b2=0xfea5
+sdram_init=0x000a
+wl_rts=2347
+log_send_wlcli=1
+pppoe_hostuniq=
+ping_ipaddr=192.168.11.1
+vlan0hwname=et0
+dl_ram_addr=a0001000
+lan_hwnames=et0 wl0
+attack_mail_pop_user=
+pppoe_registered=0
+pppoe_retransmit=4
+pppoe_demand=0
+pmon_upgrade_mode=0
+pppoe_ac_name_1=
+wl0_radius_key=
+pppoe_ac_name_2=
+pppoe_ac_name_3=
+wl0_corerev=7
+wl_key=1
+lan_speed=AUTO
+pppoe_ac_name_4=
+pppoe_mru=1454
+wl0_channel=11
+phytst=0
+pppoe_auth=AUTO
+upnp_enable=1
+wl_ps=0
+product_name=Product_name
+wl_closed=0
+wl0_auth_mode=disabled
+wl0_crypto=tkip
+boardnum=00
+attack_mail_smtp_addr=
+boardtype_2=0
+wl_bcn=100
+d11b_rts=2347
+forward_tcp=
+d11b_hwaddr=
+rip_lan_send=0
diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/pci.txt
new file mode 100644 (file)
index 0000000..2be1726
--- /dev/null
@@ -0,0 +1,37 @@
+PCI devices found:
+  Bus  0, device   0, function  0:
+    Class 0501: PCI device 14e4:0800 (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
+      Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff].
+      Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff].
+      Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff].
+  Bus  0, device   1, function  0:
+    Class 0280: PCI device 14e4:4320 (rev 1).
+      IRQ 4.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
+  Bus  0, device   2, function  0:
+    Class 0200: PCI device 14e4:4713 (rev 1).
+      IRQ 5.
+      Master Capable.  Latency=64.
+      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
+  Bus  0, device   3, function  0:
+    Class 0c03: PCI device 14e4:4717 (rev 1).
+      IRQ 6.
+      Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
+  Bus  0, device   4, function  0:
+    Class 0c03: PCI device 14e4:4716 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
+  Bus  0, device   5, function  0:
+    Class 0b30: PCI device 14e4:0816 (rev 1).
+      IRQ 2.
+      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
+  Bus  0, device   6, function  0:
+    Class 0500: PCI device 14e4:080f (rev 1).
+      IRQ 3.
+      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
+      Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
+      Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
+      Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff].