From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Fri, 23 Mar 2018 05:59:39 +0000 (+0900)
Subject: ramips: fix switch and MAC address for WHR-G300N
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fmkresin.git;a=commitdiff_plain;h=e3bf92edf5564cf72de8234b32364f0d4919524f

ramips: fix switch and MAC address for WHR-G300N

WHR-G300N has 5 ethernet ports (lan: 4, wan: 1), but there was no
correct configuration in 02_network script and 6 ports was configured
on the switch.
Also, since the MAC address was not acquired from factory partition,
incorrect values was set to LAN and WAN interfaces.

This commit fixes these issues.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 03f718ee30..4441b2293e 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -110,6 +110,7 @@ ramips_setup_interfaces()
 	u7621-06-256M-16M|\
 	vr500|\
 	wf-2881|\
+	whr-g300n|\
 	witi|\
 	wl-wn575a3|\
 	wndr3700v5|\
@@ -440,7 +441,8 @@ ramips_setup_macs()
 	e1700)
 		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
 		;;
-	gl-mt300n-v2)
+	gl-mt300n-v2|\
+	whr-g300n)
 		wan_mac=$(mtd_get_mac_binary factory 4)
 		;;
 	hc5*61|\
diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
index da861ce66e..a7c28341b2 100644
--- a/target/linux/ramips/dts/WHR-G300N.dts
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -107,6 +107,10 @@
 	};
 };
 
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
 &esw {
 	mediatek,portmap = <0x2f>;
 };