openwrt/staging/mkresin.git
6 years agoConfig.in: fix formating
Luka Perkov [Fri, 3 May 2013 15:16:48 +0000 (15:16 +0000)]
Config.in: fix formating

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36538

6 years agohostapd: enable 802.11r for the -full variant (#13250)
Felix Fietkau [Fri, 3 May 2013 10:39:57 +0000 (10:39 +0000)]
hostapd: enable 802.11r for the -full variant (#13250)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36533

6 years agomac80211: merge a client mode channel switch handling fix
Felix Fietkau [Fri, 3 May 2013 09:14:03 +0000 (09:14 +0000)]
mac80211: merge a client mode channel switch handling fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36531

6 years agoar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce...
Felix Fietkau [Fri, 3 May 2013 09:12:19 +0000 (09:12 +0000)]
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530

6 years agokernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by...
Felix Fietkau [Thu, 2 May 2013 15:59:57 +0000 (15:59 +0000)]
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529

6 years agobcm63xx: split into two subtargets, generic and SMP
Jonas Gorski [Thu, 2 May 2013 15:28:31 +0000 (15:28 +0000)]
bcm63xx: split into two subtargets, generic and SMP

Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527

6 years agobcm63xx: add SMP support for BCM6362 and BCM6368
Jonas Gorski [Thu, 2 May 2013 15:28:26 +0000 (15:28 +0000)]
bcm63xx: add SMP support for BCM6362 and BCM6368

BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526

6 years agokernel: generic: don't strip /proc/irq on SMP
Jonas Gorski [Thu, 2 May 2013 15:28:12 +0000 (15:28 +0000)]
kernel: generic: don't strip /proc/irq on SMP

/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525

6 years agobcm63xx: fix hsspi flash registration for BCM6362
Jonas Gorski [Thu, 2 May 2013 15:28:10 +0000 (15:28 +0000)]
bcm63xx: fix hsspi flash registration for BCM6362

Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524

6 years agobcm63xx: fix/enable livebox minipci
Jonas Gorski [Thu, 2 May 2013 15:28:07 +0000 (15:28 +0000)]
bcm63xx: fix/enable livebox minipci

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523

6 years agoscripts/config: fix an option processing error that caused duplication in diffconfig...
Felix Fietkau [Thu, 2 May 2013 14:06:10 +0000 (14:06 +0000)]
scripts/config: fix an option processing error that caused duplication in diffconfig.sh output (#13384)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36522

6 years agofirewall3: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 13:42:20 +0000 (13:42 +0000)]
firewall3: update to git head

- assume "tcp+udp" if no protcol is specified in rules or redirects (#13422, #13386)
- add support for fwmark matches and mark setting targets

SVN-Revision: 36521

6 years agouci: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 12:40:13 +0000 (12:40 +0000)]
uci: update to git head

- copy permission of config files to state files to allow access to state info by non root users
- properly handle empty string case when unsetting lists

SVN-Revision: 36518

6 years agotools/mtools: disable iconv support, it breaks on some systems
Felix Fietkau [Thu, 2 May 2013 12:39:31 +0000 (12:39 +0000)]
tools/mtools: disable iconv support, it breaks on some systems

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36516

6 years agoatheros: remove static gpio_request() from board setup and include generic kmod-gpio...
Jo-Philipp Wich [Thu, 2 May 2013 11:46:53 +0000 (11:46 +0000)]
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.

This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513

6 years agokernel: netfilter.mk: Explicitly set the order of autoloaded modules
Jo-Philipp Wich [Thu, 2 May 2013 11:25:18 +0000 (11:25 +0000)]
kernel: netfilter.mk: Explicitly set the order of autoloaded modules

In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.

So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512

6 years agotoolchain: add missing patch to gcc v4.8.0
Jo-Philipp Wich [Thu, 2 May 2013 11:25:13 +0000 (11:25 +0000)]
toolchain: add missing patch to gcc v4.8.0

SVN-Revision: 36511

6 years agoFix install of iptables pkg-config files.
Jo-Philipp Wich [Thu, 2 May 2013 08:10:55 +0000 (08:10 +0000)]
Fix install of iptables pkg-config files.

libiptc.pc depends on libip[4|6]tc.pc, thus all of those need to be
installed.
Should fix collectd build and thus #13146; which should make collectd
appear in snapshots again.

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36509

6 years agokernel: update linux 3.8 to 3.8.11
Gabor Juhos [Wed, 1 May 2013 22:15:18 +0000 (22:15 +0000)]
kernel: update linux 3.8 to 3.8.11

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507

6 years agobrcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:52:25 +0000 (21:52 +0000)]
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch

And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506

6 years agobrcm63xx: add missing binary operands to BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:12:40 +0000 (21:12 +0000)]
brcm63xx: add missing binary operands to BCM6345 ethernet patch

Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505

6 years agobrcm63xx: remove 3.7 kernel support
Florian Fainelli [Wed, 1 May 2013 21:12:26 +0000 (21:12 +0000)]
brcm63xx: remove 3.7 kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504

6 years agokernel: add md5sum for 3.9 final
Gabor Juhos [Tue, 30 Apr 2013 11:29:38 +0000 (11:29 +0000)]
kernel: add md5sum for 3.9 final

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36499

6 years agoar71xx: rename WNR2000v3 support patch
Gabor Juhos [Tue, 30 Apr 2013 10:44:11 +0000 (10:44 +0000)]
ar71xx: rename WNR2000v3 support patch

Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498

6 years agofirmware-utils/mktplinkfw: add description for -W option into usage output
Gabor Juhos [Tue, 30 Apr 2013 10:44:10 +0000 (10:44 +0000)]
firmware-utils/mktplinkfw: add description for -W option into usage output

Add description for -W <hwrev> option into usage output of mktplinkfw.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497

6 years agox86/geos: switch to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:44:09 +0000 (10:44 +0000)]
x86/geos: switch to 3.8.10

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496

6 years agolinux/3.9: implement pcibios_get_phb_of_node for MIPS
Gabor Juhos [Tue, 30 Apr 2013 10:44:08 +0000 (10:44 +0000)]
linux/3.9: implement pcibios_get_phb_of_node for MIPS

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495

6 years agolinux/3.8: use backported pcibios_get_phb_of_node patches
Gabor Juhos [Tue, 30 Apr 2013 10:44:07 +0000 (10:44 +0000)]
linux/3.8: use backported pcibios_get_phb_of_node patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494

6 years agokernel: update linux 3.8 to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:43:59 +0000 (10:43 +0000)]
kernel: update linux 3.8 to 3.8.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493

6 years agoat91: add missing config symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:58 +0000 (10:43 +0000)]
at91: add missing config symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492

6 years agolinux/3.{8,9}: add missing symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:57 +0000 (10:43 +0000)]
linux/3.{8,9}: add missing symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491

6 years agolinux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
Gabor Juhos [Tue, 30 Apr 2013 10:43:56 +0000 (10:43 +0000)]
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL

It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490

6 years agoramips: move dlink profile to correct sub folder - 2nd try
John Crispin [Tue, 30 Apr 2013 10:34:20 +0000 (10:34 +0000)]
ramips: move dlink profile to correct sub folder - 2nd try

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489

6 years agoramips: move dlink profile to correct sub folder
John Crispin [Tue, 30 Apr 2013 08:24:26 +0000 (08:24 +0000)]
ramips: move dlink profile to correct sub folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487

6 years agotoolchain: gcc: backport fixes for gcc bug 54295
Jonas Gorski [Mon, 29 Apr 2013 15:40:21 +0000 (15:40 +0000)]
toolchain: gcc: backport fixes for gcc bug 54295

Fix "Widening multiply-accumulate operation uses wrong value extension"
for 4.7, 4.7-linaro and 4.6-linaro, which backported the broken code to 4.6.
Vanilla 4.6 is unaffected.

Fixes #13420.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36486

6 years agomove packages related to telephony into its own feed
Mirko Vogt [Mon, 29 Apr 2013 02:17:02 +0000 (02:17 +0000)]
move packages related to telephony into its own feed

remove telephony related packages from packages.svn
and add new feed 'telephony.git' to feeds.conf.default

SVN-Revision: 36485

6 years agobroadcom-diag: support for the WNDR3700v3
Hauke Mehrtens [Sun, 28 Apr 2013 21:11:17 +0000 (21:11 +0000)]
broadcom-diag: support for the WNDR3700v3

I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482

6 years agoacx-mac80211: make it compile with recent mac80211 again
Hauke Mehrtens [Sun, 28 Apr 2013 18:53:20 +0000 (18:53 +0000)]
acx-mac80211: make it compile with recent mac80211 again

SVN-Revision: 36481

6 years agobrcm47xx: use kernel 3.8.10 as default kernel
Hauke Mehrtens [Sun, 28 Apr 2013 18:25:16 +0000 (18:25 +0000)]
brcm47xx: use kernel 3.8.10 as default kernel

The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480

6 years agobroadcom-wl: read channel using wlc on detect
Hauke Mehrtens [Sun, 28 Apr 2013 18:21:34 +0000 (18:21 +0000)]
broadcom-wl: read channel using wlc on detect

Hardcoding channel number to 11 is a bad idea, it may be even not
available on some devices. If there are two single-band radios, the
one for 5GHz doesn't have 11 channel.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36479

6 years agobrcm47xx: add board detection for NETGEAR WNDR4500 V2
Hauke Mehrtens [Sun, 28 Apr 2013 18:19:31 +0000 (18:19 +0000)]
brcm47xx: add board detection for NETGEAR WNDR4500 V2

SVN-Revision: 36478

6 years agomac80211: brcmsmac: remove initial support for core rev 28
Hauke Mehrtens [Sun, 28 Apr 2013 17:59:24 +0000 (17:59 +0000)]
mac80211: brcmsmac: remove initial support for core rev 28

To add support for core rev 28 there are a lot more changes needed.

SVN-Revision: 36477

6 years agomac80211: b43: only use gpio 0 and 1 for the wifi led
Hauke Mehrtens [Sun, 28 Apr 2013 17:57:30 +0000 (17:57 +0000)]
mac80211: b43: only use gpio 0 and 1 for the wifi led

sometimes b43 truned the gpio for the switch reset on.

SVN-Revision: 36476

6 years agokernel: fix a memory leak in split_rootfs_data()
Hauke Mehrtens [Sun, 28 Apr 2013 17:01:56 +0000 (17:01 +0000)]
kernel: fix a memory leak in split_rootfs_data()

allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475

6 years agomac80211: b43: Handle DMA RX descriptor underrun
Hauke Mehrtens [Sun, 28 Apr 2013 16:55:53 +0000 (16:55 +0000)]
mac80211: b43: Handle DMA RX descriptor underrun

SVN-Revision: 36474

6 years agokernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master...
Hauke Mehrtens [Sun, 28 Apr 2013 16:52:11 +0000 (16:52 +0000)]
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.

SVN-Revision: 36473

6 years agoiwinfo: fix iwinfo_hardware() return value if chip id is not found
Jo-Philipp Wich [Sun, 28 Apr 2013 14:04:39 +0000 (14:04 +0000)]
iwinfo: fix iwinfo_hardware() return value if chip id is not found

SVN-Revision: 36471

6 years agokernel: update linux 3.9 patches to rc8
Jonas Gorski [Sun, 28 Apr 2013 11:55:23 +0000 (11:55 +0000)]
kernel: update linux 3.9 patches to rc8

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36469

6 years agokernel: add missing bcma defines and header file for bcrmfmac
Jonas Gorski [Sun, 28 Apr 2013 11:10:42 +0000 (11:10 +0000)]
kernel: add missing bcma defines and header file for bcrmfmac

Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468

6 years agoath9k: fix keycache handling with many connected clients
Felix Fietkau [Sat, 27 Apr 2013 09:56:18 +0000 (09:56 +0000)]
ath9k: fix keycache handling with many connected clients

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36467

6 years agomac80211: refresh patch
Felix Fietkau [Sat, 27 Apr 2013 09:56:14 +0000 (09:56 +0000)]
mac80211: refresh patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36466

6 years agonetifd: update to git head - disables multicast snooping by default on bridges
Jo-Philipp Wich [Sat, 27 Apr 2013 09:28:40 +0000 (09:28 +0000)]
netifd: update to git head - disables multicast snooping by default on bridges

SVN-Revision: 36463

6 years agoar71xx: add user-space support for WNR2000v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:54 +0000 (17:00 +0000)]
ar71xx: add user-space support for WNR2000v3

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461

6 years agoar71xx: add profile and build image for WNR2000v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:53 +0000 (17:00 +0000)]
ar71xx: add profile and build image for WNR2000v3

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460

6 years agoar71xx: Add Netgear WNR2000v3 support
Gabor Juhos [Fri, 26 Apr 2013 17:00:52 +0000 (17:00 +0000)]
ar71xx: Add Netgear WNR2000v3 support

Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459

6 years agoar71xx: add profile and build image for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:50 +0000 (17:00 +0000)]
ar71xx: add profile and build image for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458

6 years agoar71xx: add user-space support for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:49 +0000 (17:00 +0000)]
ar71xx: add user-space support for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457

6 years agoar71xx: add kernel support for TPLINK WR720N v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:48 +0000 (17:00 +0000)]
ar71xx: add kernel support for TPLINK WR720N v3

Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456

6 years agofirmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:47 +0000 (17:00 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455

6 years agompc85xx: Add subtargets Generic and P1020
Gabor Juhos [Fri, 26 Apr 2013 16:57:43 +0000 (16:57 +0000)]
mpc85xx: Add subtargets Generic and P1020

Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36454

6 years agokernel: update linux 3.8 to 3.8.9
Gabor Juhos [Fri, 26 Apr 2013 16:55:42 +0000 (16:55 +0000)]
kernel: update linux 3.8 to 3.8.9

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453

6 years agoat91: upgrade to kernel 3.8.7 and use devicetree
Gabor Juhos [Fri, 26 Apr 2013 16:55:40 +0000 (16:55 +0000)]
at91: upgrade to kernel 3.8.7 and use devicetree

This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36452

6 years agoramips: rt3883: fix build error
Gabor Juhos [Fri, 26 Apr 2013 16:55:28 +0000 (16:55 +0000)]
ramips: rt3883: fix build error

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451

6 years agoiwinfo: add hw database file
Jo-Philipp Wich [Fri, 26 Apr 2013 13:21:01 +0000 (13:21 +0000)]
iwinfo: add hw database file

SVN-Revision: 36450

6 years agoiwinfo: move builtin hardware database to /usr/share/libiwinfo/hardware.txt
Jo-Philipp Wich [Fri, 26 Apr 2013 13:20:15 +0000 (13:20 +0000)]
iwinfo: move builtin hardware database to /usr/share/libiwinfo/hardware.txt

SVN-Revision: 36449

6 years agomac80211: update to wireless-testing 2013-04-16 + backports
Felix Fietkau [Fri, 26 Apr 2013 10:52:03 +0000 (10:52 +0000)]
mac80211: update to wireless-testing 2013-04-16 + backports

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36448

6 years agoprocd: fix wrap around bug in logread time handling code
John Crispin [Thu, 25 Apr 2013 19:51:08 +0000 (19:51 +0000)]
procd: fix wrap around bug in logread time handling code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36447

6 years agohotplug2: make it depend on !PROCD_INIT
John Crispin [Thu, 25 Apr 2013 19:16:54 +0000 (19:16 +0000)]
hotplug2: make it depend on !PROCD_INIT

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36446

6 years agolantiq: make leds and network work on VG3503J
John Crispin [Thu, 25 Apr 2013 19:03:41 +0000 (19:03 +0000)]
lantiq: make leds and network work on VG3503J

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445

6 years agolantiq: fix board detection helpers
John Crispin [Thu, 25 Apr 2013 19:03:37 +0000 (19:03 +0000)]
lantiq: fix board detection helpers

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444

6 years agolantiq: move dts files to thir own folder
John Crispin [Thu, 25 Apr 2013 19:03:32 +0000 (19:03 +0000)]
lantiq: move dts files to thir own folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443

6 years agogeneric: fix rtl8366_smi compile warning
John Crispin [Thu, 25 Apr 2013 19:03:29 +0000 (19:03 +0000)]
generic: fix rtl8366_smi compile warning

drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36442

6 years agolantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
John Crispin [Thu, 25 Apr 2013 19:03:25 +0000 (19:03 +0000)]
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441

6 years agolantiq: make lzma-loader based images for VG3503J
John Crispin [Thu, 25 Apr 2013 19:03:21 +0000 (19:03 +0000)]
lantiq: make lzma-loader based images for VG3503J

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440

6 years agolantiq: update VG3503J.dts to match new partition layout
John Crispin [Thu, 25 Apr 2013 19:03:17 +0000 (19:03 +0000)]
lantiq: update VG3503J.dts to match new partition layout

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439

6 years agolantiq: add lzma-loader source
John Crispin [Thu, 25 Apr 2013 19:03:13 +0000 (19:03 +0000)]
lantiq: add lzma-loader source

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438

6 years agoramips: add profile for Dlink DIR-615 H1
John Crispin [Thu, 25 Apr 2013 19:03:09 +0000 (19:03 +0000)]
ramips: add profile for Dlink DIR-615 H1

Hello,
this adds the profile for Dlink DIR-615 H1 without the usb default packages
since this router does not have a usb port and while all the needed definitions
for building are already in target/linux/ramips/image/Makefile this also allows
users to select the exact target in RT305x based boards menuconfig for this router
and compile its firmware.

Signed-off-by: Daniel Petre <dani@ip6.ro>
Patchwork: http://patchwork.openwrt.org/patch/3529/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36437

6 years agoramips: remove now unneeded user-space board detection
John Crispin [Thu, 25 Apr 2013 19:03:05 +0000 (19:03 +0000)]
ramips: remove now unneeded user-space board detection

Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436

6 years agoramips: introduce DTS for ALL5003
John Crispin [Thu, 25 Apr 2013 19:03:01 +0000 (19:03 +0000)]
ramips: introduce DTS for ALL5003

Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435

6 years agoramips: set preinit interface to eth0 by default.
John Crispin [Thu, 25 Apr 2013 19:02:57 +0000 (19:02 +0000)]
ramips: set preinit interface to eth0 by default.

This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434

6 years agoramips: Add Alpha ASL-26555 support.
John Crispin [Thu, 25 Apr 2013 19:02:53 +0000 (19:02 +0000)]
ramips: Add Alpha ASL-26555 support.

This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433

6 years agoramips: Add support of D-link DIR-620D1
John Crispin [Thu, 25 Apr 2013 19:02:48 +0000 (19:02 +0000)]
ramips: Add support of D-link DIR-620D1

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432

6 years agoramips: sync kernel patches with the mips-next tree
John Crispin [Thu, 25 Apr 2013 19:02:42 +0000 (19:02 +0000)]
ramips: sync kernel patches with the mips-next tree

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431

6 years agopreinit: move cmdline failsafe= handling ot the generic code
John Crispin [Thu, 25 Apr 2013 19:02:37 +0000 (19:02 +0000)]
preinit: move cmdline failsafe= handling ot the generic code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430

6 years agomount_root: prepare base-files
John Crispin [Thu, 25 Apr 2013 19:02:32 +0000 (19:02 +0000)]
mount_root: prepare base-files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36429

6 years agoboot: make use of kmodloader if it is available
John Crispin [Thu, 25 Apr 2013 19:02:28 +0000 (19:02 +0000)]
boot: make use of kmodloader if it is available

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36428

6 years agoubox: add ubox package
John Crispin [Thu, 25 Apr 2013 19:02:24 +0000 (19:02 +0000)]
ubox: add ubox package

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36427

6 years agoprocd: update to latest git version
John Crispin [Thu, 25 Apr 2013 19:02:20 +0000 (19:02 +0000)]
procd: update to latest git version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36426

6 years agonetifd: update to the latest version, fixes interface reload issues when removing...
Felix Fietkau [Thu, 25 Apr 2013 16:28:19 +0000 (16:28 +0000)]
netifd: update to the latest version, fixes interface reload issues when removing the ifname option

SVN-Revision: 36424

6 years ago6relayd: Fix generation of RA-messages
Steven Barth [Wed, 24 Apr 2013 18:22:08 +0000 (18:22 +0000)]
6relayd: Fix generation of RA-messages

SVN-Revision: 36419

6 years agoiwinfo: add SR71-15 radio info, fix nl80211 channel/frequency reporting on some archi...
Jo-Philipp Wich [Wed, 24 Apr 2013 14:44:20 +0000 (14:44 +0000)]
iwinfo: add SR71-15 radio info, fix nl80211 channel/frequency reporting on some architectures

SVN-Revision: 36417

6 years agofirewall3: Make IPv6 ULA-Border generation dynamic
Steven Barth [Wed, 24 Apr 2013 14:17:24 +0000 (14:17 +0000)]
firewall3: Make IPv6 ULA-Border generation dynamic

This fixes working behind another router which gives out ULAs.

SVN-Revision: 36416

6 years agoEnable hidraw support.
Jo-Philipp Wich [Wed, 24 Apr 2013 09:49:09 +0000 (09:49 +0000)]
Enable hidraw support.

It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415

6 years agoAdd kernel module package for hid-generic driver.
Jo-Philipp Wich [Wed, 24 Apr 2013 09:49:03 +0000 (09:49 +0000)]
Add kernel module package for hid-generic driver.

Needed to support e.g. keyboards and mice.

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36414

6 years ago6relayd: update package description
Steven Barth [Wed, 24 Apr 2013 07:21:42 +0000 (07:21 +0000)]
6relayd: update package description

SVN-Revision: 36413

6 years agodnsmasq: update to 2.66 Thanks to Christoph König for patches.
Steven Barth [Wed, 24 Apr 2013 05:55:39 +0000 (05:55 +0000)]
dnsmasq: update to 2.66 Thanks to Christoph König for patches.

SVN-Revision: 36412

6 years agoodhcp6c: Set default SOL_MAX_RT to 1h
Steven Barth [Wed, 24 Apr 2013 05:02:45 +0000 (05:02 +0000)]
odhcp6c: Set default SOL_MAX_RT to 1h

SVN-Revision: 36411

6 years agohostapd: return the frequency to some ubus calls to make integration easier
Felix Fietkau [Tue, 23 Apr 2013 18:35:50 +0000 (18:35 +0000)]
hostapd: return the frequency to some ubus calls to make integration easier

SVN-Revision: 36410

6 years agomac80211: use the original mac address for the first virtual interface
Felix Fietkau [Tue, 23 Apr 2013 16:32:24 +0000 (16:32 +0000)]
mac80211: use the original mac address for the first virtual interface

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36408

6 years agobcm63xx: update patches with upstream submissions
Jonas Gorski [Tue, 23 Apr 2013 13:55:36 +0000 (13:55 +0000)]
bcm63xx: update patches with upstream submissions

SVN-Revision: 36407