openwrt/staging/mkresin.git
6 months agobuild: remove duplicate mksercomfw image recipe
Mathias Kresin [Sat, 5 Jan 2019 20:02:33 +0000 (21:02 +0100)]
build: remove duplicate mksercomfw image recipe

Keep the ramips/mt76x8 copy, since it's only required for this target at
the moment.

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agofirmware-utils: mkdlinkfw: fix error handling
Mathias Kresin [Sat, 5 Jan 2019 06:40:55 +0000 (07:40 +0100)]
firmware-utils: mkdlinkfw: fix error handling

fread() doesn't set errno, ferror need to be used to check for errors.
While at it, check if we read the expect number of elements.

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agofirmware-utils: mkdlinkfw: create reproducible header
Mathias Kresin [Sat, 5 Jan 2019 06:34:02 +0000 (07:34 +0100)]
firmware-utils: mkdlinkfw: create reproducible header

Use the SOURCE_DATE_EPOCH environment variable if set instead of the
current time. The used timestamp matches the timestamp of the latest
commit this way and make the images reproducible.

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agofirmware-utils: mkdlinkfw: cleanup code
Mathias Kresin [Sat, 5 Jan 2019 11:08:09 +0000 (12:08 +0100)]
firmware-utils: mkdlinkfw: cleanup code

Drop unused function and macros. With the cleanup the gnu extension
typeof isn't used any longer and the gnu99 compile flag can be dropped.

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agouclient: add ALTERNATIVES for wget
Hans Dedecker [Fri, 11 Jan 2019 15:18:20 +0000 (16:18 +0100)]
uclient: add ALTERNATIVES for wget

Don't symlink uclient-fetch anymore to /bin/wget but rather use
the ALTERNATIVES support for wget to install it as /usr/bin/wget.
Let uclient-fetch provide wget

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agobusybox: add ALTERNATIVES for wget
Hans Dedecker [Fri, 11 Jan 2019 15:15:57 +0000 (16:15 +0100)]
busybox: add ALTERNATIVES for wget

Busybox wget applet conflicts with the version from uclient.
Fix this by using ALTERNATIVE support for wget in busybox.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agouboot-sunxi: Orange Pi Zero Plus: Fix SdCard detection
Hauke Mehrtens [Sun, 13 Jan 2019 16:16:42 +0000 (17:16 +0100)]
uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detection

The Detection pin is at PF6 and not at PH13 like defined before. I
checked the schematics and now I am am not seeing this error message any
more:
Loading Environment from FAT... Card did not respond to voltage select!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agouboot-sunxi: disable AXP209 on Olimex A13 Olinuxino
Zoltan HERPAI [Fri, 4 Jan 2019 12:11:26 +0000 (13:11 +0100)]
uboot-sunxi: disable AXP209 on Olimex A13 Olinuxino

Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the
core voltage correctly, which causes the board to freeze later at
kernel if CPU throttling is enabled (see below). This will almost
certainly kill the VGA output (which requires LDO3 to be set), but
this is still a better option than to disable CPU throttling for
all Cortex-A8 based devices.

[    2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz
[    2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
6 months agouboot-sunxi: update Theobroma A31 Pangolin support
Zoltan HERPAI [Mon, 31 Dec 2018 14:41:38 +0000 (15:41 +0100)]
uboot-sunxi: update Theobroma A31 Pangolin support

Drop removed pinctrl definitions from the i2c3 pin layout.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
6 months agoarm-trusted-firmware-sunxi: Replace with official ARM version
Hauke Mehrtens [Wed, 19 Dec 2018 12:12:49 +0000 (13:12 +0100)]
arm-trusted-firmware-sunxi: Replace with official ARM version

Instead of using a fork of the ARM trusted firmware specifically for the
Allwinner SoCs, use the official version from ARM now, this version
supports the Allwinner SoCs now and the older ATF repository is
deprecated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agouboot-sunxi: Update to version 2018.11
Hauke Mehrtens [Wed, 19 Dec 2018 11:53:52 +0000 (12:53 +0100)]
uboot-sunxi: Update to version 2018.11

This updates the uboot for the sunxi target to version 2018.11
The removed patches are applied upstream and not needed any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: Add support for kernel 4.19
Hauke Mehrtens [Mon, 26 Nov 2018 22:47:00 +0000 (23:47 +0100)]
sunxi: Add support for kernel 4.19

This adds supprot for kernel 4.19 to the sunxi target. The patches and
the configuration were copied from the kernel 4.14 patches folder and
adapted for kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: Refresh kernel 4.14 configuration
Hauke Mehrtens [Sat, 8 Dec 2018 17:33:17 +0000 (18:33 +0100)]
sunxi: Refresh kernel 4.14 configuration

Refresh the sunxi kernel configuration without doing any intentional
changes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: Use kernel specific sub target configuration
Hauke Mehrtens [Sat, 8 Dec 2018 15:37:14 +0000 (16:37 +0100)]
sunxi: Use kernel specific sub target configuration

To make it easier to support multiple kernel versions in parallel also
copy the sub target specific kernel configurations into kernel specific
files.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agosunxi: Remove unneeded patches
Hauke Mehrtens [Mon, 26 Nov 2018 23:17:05 +0000 (00:17 +0100)]
sunxi: Remove unneeded patches

In the device tree file the higher offsets of the reset controller are
not used, so this patch supporting higher bits is not needed.
The sunxi architecture switched to the simple reset controller with
kernel 4.19 and then this patch does not apply any more.
The sunxi target in OpenWrt is very close to mainline, so if the device
tree files from the mainline Linux kernel need this the mainline kernel
will get support for this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agokernel/modules: Add missing config option
Hauke Mehrtens [Sun, 13 Jan 2019 14:33:26 +0000 (15:33 +0100)]
kernel/modules: Add missing config option

This configuration option was added in kernel 4.15 and is missing in the
kernel 4.19 configuration.

Fixes: ed2839ac419 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agomalta: Add support for kernel 4.19
Hauke Mehrtens [Sun, 13 Jan 2019 13:50:44 +0000 (14:50 +0100)]
malta: Add support for kernel 4.19

This adds a kernel configuration file for kernel 4.19 on malta.
CONFIG_POWER_RESET_PIIX4_POWEROFF and CONFIG_POWER_RESET_SYSCON were
activated because malta now uses this driver for reboot.

CONFIG_BLK_DEV_SR was also added because it was also added to the kernel
default configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agomalta: Refresh kernel 4.14 configuration
Hauke Mehrtens [Sun, 13 Jan 2019 13:31:03 +0000 (14:31 +0100)]
malta: Refresh kernel 4.14 configuration

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agokernel: MIPS: Add CPU option reporting to /proc/cpuinfo
Hauke Mehrtens [Sun, 23 Dec 2018 17:41:51 +0000 (18:41 +0100)]
kernel: MIPS: Add CPU option reporting to /proc/cpuinfo

Many MIPS CPUs have optional CPU features which are not activates for
all CPU cores. Print the CPU options which are implemented in the core
in /proc/cpuinfo. This makes it possible to see what features are
supported and which are not supported. This should cover all standard
MIPS extensions, before it only printed information about the main MIPS
ASEs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agokernel/modules: Fix build of kmod-pmbus
Hauke Mehrtens [Sun, 13 Jan 2019 12:12:51 +0000 (13:12 +0100)]
kernel/modules: Fix build of kmod-pmbus

This fixes two build problems introduced with the recently added new
kernel module package.

Fixes: ed2839ac4190 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agogeneric: ar8216: ar8327: kill warnings
Chuanhong Guo [Thu, 10 Jan 2019 17:22:42 +0000 (01:22 +0800)]
generic: ar8216: ar8327: kill warnings

This fixed warnings caused by returning value in a void function

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
6 months agompc85xx: add support for Sophos RED 15w Rev.1
David Bauer [Tue, 8 Jan 2019 00:20:56 +0000 (01:20 +0100)]
mpc85xx: add support for Sophos RED 15w Rev.1

Hardware
========
CPU:  Freescale P1010 PowerPC
RAM:  128M DDR3
NAND: 128MiB
ETH:  RTL8211F SGMII PHY
      RTL8367B 5-port RGMII switch
      (not connected to SoC - unmanaged)
WiFi: SparkLan WPEA-121N
       - Atheros AR9382 2T2R abgn
USB:  1x USB 2.0
LED:  System, Router, Internet, Tunnel controllable
      LAN1-4, WAN, Power non-controllable
BTN:  None

Installation
============
1. Power on the device while attached to the Console port.

2. Halt the U-Boot by pressing Enter when prompted.

3. Set the correct bootcmd for booting OpenWRT:
 > setenv bootargs_owrt "setenv bootargs console=ttyS0,115200"
 > setenv bootcmd "run bootargs_owrt;
   nand read 0x1000000 0x300000 0x800000;
   bootm 0x1000000;"
 > saveenv

5. Rename OpenWRT initramfs image to 'kernel.bin' and place it in a
   TFTP server root-directory served on 192.168.1.2/24. Connect your
   computer to one of the LAN-ports.

4. Boot OpenWRT initramfs image with
 > run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin;
   bootm 0x1000000;

6. (Optional)
   Make a Backup of 'sophos-os1', 'sophos-os2' and 'sophos-data' in case
   you ever want to go back to the vendor firmware.

7. Create Ubi Volume on mtd4 by executing
 > ubiformat /dev/mtd4 -y

8. Transfer OpenWRT sysupgrade image to the device via SCP and install it
   with
 > sysupgrade -n <openwrt-image-file>

Back to Stock
=============
If you want to go back to the stock firmware, here is the bootcmd of the
vendor firmware:
 > setenv bootargs console=ttyS0,115200 root=/dev/mtdblock5;
   nand read 0xc00000 0x00300000  0x100000;
   nand read 0x1000000 0x00400000 0x00800000;
   bootm 0x1000000 - 0xc00000

Set it via 'setenv' from the U-Boot shell and don't forget to save it
using 'saveenv'!

After this, boot the OpenWRT initramfs image just like you would for
installation. Write back the three vendor partitions using mtd. Reboot
the device afterwards.

Signed-off-by: David Bauer <mail@david-bauer.net>
[refresh and reorder patches]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoapm821xx: 4.14: sync config
Christian Lamparter [Sat, 5 Jan 2019 21:21:40 +0000 (22:21 +0100)]
apm821xx: 4.14: sync config

This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agompc85xx: disable initramfs image in TL-WDR4900
Pawel Dembicki [Sun, 13 Jan 2019 07:18:55 +0000 (07:18 +0000)]
mpc85xx: disable initramfs image in TL-WDR4900

Initramfs image isn't required for this device and regular
initramfs generation isn't work properly. It create not working
binaries.

This patch disable initramfs image for TL-WDR4900.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
6 months agompc85xx: add support for Freescale (NXP) P2020RDB
Pawel Dembicki [Sun, 30 Dec 2018 07:38:45 +0000 (07:38 +0000)]
mpc85xx: add support for Freescale (NXP) P2020RDB

This commit add initial support for Freescale (NXP) P2020RDB

Hardware:
SoC: P2020 2x1GHz
DRAM: 512-1GB DDR3
2 + 4 GBE (2 separate ports and four in VSC7385)
Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR
PCIE x1 and mPCIE x1
SD Reader

Interfaces:
GBE RJ45 x6
USB2.0 x1
UART x2
I2C x2
JTAG x1
SD x1
PCIE x2 (PCIE and mPCIE)

Flash instructions:
Place sysupgrade image to 0x80000 address in NOR.
Eg. (no brakelines in setenv command):

setenv 'firmware_flash tftpboot $loadaddr $firmwarefile;
 protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize;
 cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize;
 cmp.b $loadaddr $norfdtaddr $filesize'
setenv firmwarefile firmware.bin
run firmware_flash

Boot (no brakeline in setenv command):
setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev,
$baudrate rootfstype=squashfs $othbootargs;
bootm $norfdtaddr'
saveenv
boot

Known issues:
-Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI)
-No SD reader support

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
6 months agokernel/modules: add kmod-pmbus-zl6100 module
Pawel Dembicki [Wed, 2 Jan 2019 19:59:05 +0000 (19:59 +0000)]
kernel/modules: add kmod-pmbus-zl6100 module

This patch adds the kmod packaging for the Intersil / Zilker Labs
ZL6100 and compatible digital DC-DC controllers as well as the
core kernel module for the Power Management Bus.

Add:
kmod-pmbus-core
kmod-pmbus-zl6100

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
6 months agox86: Add support for kernel 4.19
Hauke Mehrtens [Thu, 1 Nov 2018 17:03:00 +0000 (18:03 +0100)]
x86: Add support for kernel 4.19

This adds initial support for kernel 4.19 to the x86 target.
The patches and the kernel configurations were copied from kernel 4.14
and then refreshed.

The legacy and the genode target will not support PAE any more because
they use a CPU type which does not support PAE, the generic sub target
still supports PAE.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agox86: Refresh kernel 4.14 configuration
Hauke Mehrtens [Sun, 30 Dec 2018 18:05:18 +0000 (19:05 +0100)]
x86: Refresh kernel 4.14 configuration

This refreshes the kernel configuration for kernel 4.14.
First this was run for the legacy target:
make kernel_oldconfig
Then for all targets including the legacy target this was run:
make kernel_oldconfig CONFIG_TARGET=subtarget
The option CONFIG_104_QUAD_8 was added to the generic configuration
because it would have been automatically removed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agox86: Use kernel specific subtarget configurations
Hauke Mehrtens [Sat, 8 Dec 2018 12:09:14 +0000 (13:09 +0100)]
x86: Use kernel specific subtarget configurations

This makes it possible to use different sub target configurations for
kernel 4.19 for example.
To support kernel 4.9 and kernel 4.14 with the same configuration file
already needed some extra work this will not be needed for kernel 4.19
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agogdb: The signal definitions of musl and gdb collide
Hauke Mehrtens [Wed, 2 Jan 2019 15:32:35 +0000 (16:32 +0100)]
gdb: The signal definitions of musl and gdb collide

This fixes compilation of gdb on arm64.

The kernel defines "struct sigcontext" in asm/sigcontext.h and musl libc
defines it in signal.h, which collides.
Kernel 4.14 misses the definitions of struct user_sve_header so we still
have to use the aarch64-sve-linux-sigcontext.h header file which also
provides that and make sure aarch64-sve-linux-sigcontext.h does not
provide the same headers as the kernel or musl.

Fixes: FS#2040
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agobzip2: fix hardening build
Hauke Mehrtens [Tue, 1 Jan 2019 23:22:41 +0000 (00:22 +0100)]
bzip2: fix hardening build

Set the LDFLAGS otherwise it will not get the target hardening flags or
any other generic flags provided in the LDFLAGS

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agotools/firmware-utils: fix sysupgrade typo in mkdapimg2
Hans Dedecker [Sat, 12 Jan 2019 18:47:02 +0000 (19:47 +0100)]
tools/firmware-utils: fix sysupgrade typo in mkdapimg2

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agotools/firmware-utils: fix sysupgrade typo in mkdapimg
Hans Dedecker [Sat, 12 Jan 2019 18:42:56 +0000 (19:42 +0100)]
tools/firmware-utils: fix sysupgrade typo in mkdapimg

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agoocteon: fix typo in platform.sh
Hans Dedecker [Sat, 12 Jan 2019 18:39:01 +0000 (19:39 +0100)]
octeon: fix typo in platform.sh

Fix upgrade typo

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agocryptodev-linux: Update to 1.10
Daniel Engberg [Mon, 24 Dec 2018 10:34:22 +0000 (11:34 +0100)]
cryptodev-linux: Update to 1.10

Update cryptodev-linux to 1.10
Switch from git to codeload generated tarball

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
6 months agomt76: fix typo in version number
Felix Fietkau [Fri, 11 Jan 2019 16:23:29 +0000 (17:23 +0100)]
mt76: fix typo in version number

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 months agomt76: update to the latest version
Felix Fietkau [Fri, 11 Jan 2019 16:03:40 +0000 (17:03 +0100)]
mt76: update to the latest version

58988a3 mt76: fix signedness of rx status signal field
bce700d mt7603: fix signal strength reporting on single-stream devices
148219d mt7603: fix checkpatch issues
2a092e2 mt7603: fix per-rate retry accounting
962152b mt7603: fix WMM TXOP limit configuration
24ec040 mt7603: fix BSSID configuration in AP mode
48fb011 mt7603: fix CF-End transmit rate when 11b stations are connected
9daa5ff mt76: make const array 'data' static, shrinks object size
7d4a95c mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb
f84b008 mt76: fix tx status reporting for non-probing frames
8167074 Revert "mt7603: update firmware to 20161027164355"
2ad54b2 mt76: move wcid rssi ewma init to mt76 core
d77c861 mt76: fix rssi ewma tracking
eca96cd mt76: use proper name for __MT76x02_H macro
d1bc504 mt76: fix building without CONFIG_LEDS_CLASS
a946b78 mt76: add led support to mt76x0e driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 months agoodhcp6c: update to latest git HEAD
Hans Dedecker [Fri, 11 Jan 2019 14:20:53 +0000 (15:20 +0100)]
odhcp6c: update to latest git HEAD

d2e247d odhcp6c: align further with RFC8415
ce83a23 dhcpv6: avoid parsing unncessary IAs
b079733 dhcpv6: set cnt to correct IOV enum
41494da dhcpv6: get rid of request_prefix
f7437e4 dhcpv6: sanitize option request list

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agokernel: add bcma fix for subdevices DMA parameters
Rafał Miłecki [Fri, 11 Jan 2019 06:31:58 +0000 (07:31 +0100)]
kernel: add bcma fix for subdevices DMA parameters

This fixes bgmac DMA allocations with kernel 4.19.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agokernel: backport bcma patches that improve printing functions
Rafał Miłecki [Thu, 10 Jan 2019 15:46:21 +0000 (16:46 +0100)]
kernel: backport bcma patches that improve printing functions

Updated printing functions use dev_* helpers to provide more meaningful
messages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agosamba36: add package with hotplug.d script for auto sharing
Rafał Miłecki [Wed, 26 Dec 2018 09:51:28 +0000 (10:51 +0100)]
samba36: add package with hotplug.d script for auto sharing

The new samba36-hotplug package provides a hotplug.d script for the
"mount" subsystem. It automatically shares every mounted block device.

It works by updating /var/run/config/samba file which:
1) Is read by procd init script
2) Gets wiped on reboot providing a consistent state
3) Can be safely updated without flash wearing or conflicting with user
   changes being made in /etc/config/samba

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agosamba36: append config from /var/run/config/ for runtime shares
Rafał Miłecki [Tue, 25 Dec 2018 19:30:12 +0000 (20:30 +0100)]
samba36: append config from /var/run/config/ for runtime shares

This will allow automation/hotplug.d scripts to store runtime shares in
the /var/run/config/samba. It's useful e.g. for USB drives that user
wants to be automatically shared.

Using /var/run/config/ provides:
1) Automated cleaning on reboots
   It's important for consistency (to avoid sharing non-existing drives)
2) Safety for user non-commited changes
   Automated scripts should never call "uci [foo] commit" as that could
   flush incomplete config.

Another minor gain is avoiding flash wearing for runtime setup.

Cc: Rosy Song <rosysong@rosinson.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agobrcm47xx: backport MIPS fix adding struct device for the SoC
Rafał Miłecki [Thu, 10 Jan 2019 05:41:10 +0000 (06:41 +0100)]
brcm47xx: backport MIPS fix adding struct device for the SoC

It's needed to:
1) Fix GPIOLIB_IRQCHIP as in 4.19 there is no bcma revert anymore
2) Fix /sys/devices/
3) Fix dma_zalloc_coherent() regression

It still needs a bcma change that will follow later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agobrcm47xx: backport a final/accepted Netgear WNDR3400v3 patch
Rafał Miłecki [Thu, 10 Jan 2019 05:29:46 +0000 (06:29 +0100)]
brcm47xx: backport a final/accepted Netgear WNDR3400v3 patch

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agomac80211: brcmfmac: backport fixes from the 5.0-rc1
Rafał Miłecki [Tue, 8 Jan 2019 07:27:26 +0000 (08:27 +0100)]
mac80211: brcmfmac: backport fixes from the 5.0-rc1

This fixes:
1) Getting STA info with newer firmwares
2) Getting DMI / UEFI / OF data
3) Possible memory corruption in firmware loading code

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agomac80211: brcmfmac: trivial patches rename to use v5.0
Rafał Miłecki [Tue, 8 Jan 2019 06:20:47 +0000 (07:20 +0100)]
mac80211: brcmfmac: trivial patches rename to use v5.0

This matches Linus releasing 5.0-rc1 in place of 4.21-rc1.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agobison: update to 3.2.4
Egor Mikhaylov [Fri, 4 Jan 2019 14:58:42 +0000 (06:58 -0800)]
bison: update to 3.2.4

Signed-off-by: Egor Mikhaylov <nagakamira@gmail.com>
6 months agomac80211: brcmfmac: fix use-after-free & possible NULL pointer dereference
Rafał Miłecki [Mon, 7 Jan 2019 16:11:23 +0000 (17:11 +0100)]
mac80211: brcmfmac: fix use-after-free & possible NULL pointer dereference

1) Using fwctx variable after brcmf_fw_request_done() was executed meant
   accessing freed memory.
2) Using fwctx->completion for the wait_for_completion_timeout() call
   could reuslt in NULL pointer dereference on fw loading error or if
   brcmf_fw_request_done() was executed quickly enough.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agocns3xxx: use actual size reads for PCIe
Koen Vandeputte [Mon, 7 Jan 2019 10:59:49 +0000 (11:59 +0100)]
cns3xxx: use actual size reads for PCIe

upstream commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
which preserved the property of only doing 32-bit reads.

It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.

Due to:
- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended

It makes perfectly sense to also swap 32 bit reading in favor of actual size.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agogdb: bump to 8.2.1
Koen Vandeputte [Mon, 7 Jan 2019 11:35:34 +0000 (12:35 +0100)]
gdb: bump to 8.2.1

PR build/23516 (gdb build error under msys+mingw: strip can't handle gdb-add-index.exe)
PR build/23623 (install-strip fails)
PR rust/23626 (gdb crashes in upstream rust nil-enum test)
PR rust/23650 (rust field name access error mentions "foo")
PR gdb/23663 (gdb 8.1.1: undefined rpl_stat function with musl toolchains)
PR python/23669 (gdb.execute("show commands") doesn't work)
PR python/23714 (Command repetition stops working after gdb.execute)
PR gdb/23838 (8.2 regression for invalid -data-directory)
PR gdb/23974 ("info os" crash when specifying invalid object)
PR gdb/23999 (SYMBOL_LANGUAGE assertion failure on AIX)
PR gdb/24003 (Error when binary searching CUs for a specific DIE when using DWZ)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agotoolchain/gdb: bump to 8.2.1
Koen Vandeputte [Mon, 7 Jan 2019 11:35:20 +0000 (12:35 +0100)]
toolchain/gdb: bump to 8.2.1

PR build/23516 (gdb build error under msys+mingw: strip can't handle gdb-add-index.exe)
PR build/23623 (install-strip fails)
PR rust/23626 (gdb crashes in upstream rust nil-enum test)
PR rust/23650 (rust field name access error mentions "foo")
PR gdb/23663 (gdb 8.1.1: undefined rpl_stat function with musl toolchains)
PR python/23669 (gdb.execute("show commands") doesn't work)
PR python/23714 (Command repetition stops working after gdb.execute)
PR gdb/23838 (8.2 regression for invalid -data-directory)
PR gdb/23974 ("info os" crash when specifying invalid object)
PR gdb/23999 (SYMBOL_LANGUAGE assertion failure on AIX)
PR gdb/24003 (Error when binary searching CUs for a specific DIE when using DWZ)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agokernel: bump 4.14 to 4.14.91
Koen Vandeputte [Mon, 7 Jan 2019 10:04:01 +0000 (11:04 +0100)]
kernel: bump 4.14 to 4.14.91

Refreshed all patches.

Removed upstreamed:
- 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agokernel: bump 4.9 to 4.9.148
Koen Vandeputte [Mon, 7 Jan 2019 10:03:29 +0000 (11:03 +0100)]
kernel: bump 4.9 to 4.9.148

Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Removed upstreamed:
- 424-v4.20-net-dsa-fix-88e6060-roaming.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agokernel: bump 3.18 to 3.18.131
Koen Vandeputte [Mon, 7 Jan 2019 09:55:44 +0000 (10:55 +0100)]
kernel: bump 3.18 to 3.18.131

Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
6 months agoramips: whitespace cleanup inside hnat driver
John Crispin [Mon, 7 Jan 2019 14:45:51 +0000 (15:45 +0100)]
ramips: whitespace cleanup inside hnat driver

Signed-off-by: John Crispin <john@phrozen.org>
6 months agoramips: add two-way hashing scheme for MT7621
HsiuWen Yen [Mon, 7 Jan 2019 08:29:35 +0000 (16:29 +0800)]
ramips: add two-way hashing scheme for MT7621

Sometimes the tuples might be hashed to the same FOE entry.
When this hash collision problem occurs, some of the
connections will not be bound and consequently the CPU
idle rate cannot reach 100%. Therefore, two-way hashing
is adopted to alleviate this problem.

Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
6 months agoglibc: update to latest 2.27 commit (BZ #24018)
Hans Dedecker [Mon, 7 Jan 2019 14:13:39 +0000 (15:13 +0100)]
glibc: update to latest 2.27 commit (BZ #24018)

68c2930a56 NEWS: add entries for bugs 23275, 23861, and 23907
766e8fb932 intl: Do not return NULL on asprintf failure in gettext [BZ #24018]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agomac80211: add ABI_VERSION to fix rebuild of dependent packages after upgrades
Felix Fietkau [Sun, 6 Jan 2019 20:48:02 +0000 (21:48 +0100)]
mac80211: add ABI_VERSION to fix rebuild of dependent packages after upgrades

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 months agoipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE
David Bauer [Fri, 4 Jan 2019 20:17:20 +0000 (21:17 +0100)]
ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE

Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from
there) to fix image generation using the image-builder.

Also remove the bootloader from DEVICE_PACKAGES and instead use the
BUILD_DEVICES directive from within the U-Boot makefile.

This fixes eva-image generation using the OpenWRT image-builder.

Signed-off-by: David Bauer <mail@david-bauer.net>
6 months agompc85xx: 4.19: refresh kernel config
Christian Lamparter [Sat, 5 Jan 2019 21:31:27 +0000 (22:31 +0100)]
mpc85xx: 4.19: refresh kernel config

This patch syncs the 4.19 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agompc85xx: 4.14: refresh kernel config
Christian Lamparter [Sat, 5 Jan 2019 21:30:25 +0000 (22:30 +0100)]
mpc85xx: 4.14: refresh kernel config

This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoipq40xx: 4.14: Sync kernel config
Robert Marko [Thu, 3 Jan 2019 22:32:47 +0000 (23:32 +0100)]
ipq40xx: 4.14: Sync kernel config

This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agoipq40xx: 4.19: Sync kernel config
Robert Marko [Wed, 2 Jan 2019 13:21:48 +0000 (14:21 +0100)]
ipq40xx: 4.19: Sync kernel config

This patch syncs the 4.19 kernel config since the
KERNEL_STACKPROTECTOR and compiler options are
now part of the 4.19 generic config.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agoipq40xx: fix 4.14 ImageBuilder build woes
Christian Lamparter [Thu, 3 Jan 2019 22:24:16 +0000 (23:24 +0100)]
ipq40xx: fix 4.14 ImageBuilder build woes

Robert Marko reported an issue with the current imagebuilder images:
"Imagebuilder includes the new kmod-usb-dwc3-qcom USB driver
package by default even on 4.14. [...] the current state imagebuilder
can't build images under 4.14 at all as the kmod-usb-dwc3-qcom does
not exist in it so it throws and error and exits."

This patch reverts the Makefile to just kmod-usb-dwc3-of-simple and
once the switch to 4.19 is done. It also removes the
kmod-usb-phy-qcom-dwc3 as they only contain the usb-phy drivers for
the ipq806x generation.

Dynamic switching based on the KERNEL_PATCHVER is possible by using:
   $(if $(filter 4.14,$(KERNEL_PATCHVER)),kmod-usb-dwc3-of-simple,kmod-usb-dwc3-qcom)
though it

Fixes: 13321fa1429 ("ipq40xx: Use kmod-usb-dwc3-qcom by default")
Fixes: 6e58fb2c33e ("ipq40xx: kmod-usb-dwc3-of-simple vs kmod-usb-dwc3-qcom")
Reported-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoapm821xx: MBL: fix kernel/apollo3g.dtb artifact build
Christian Lamparter [Thu, 3 Jan 2019 22:01:31 +0000 (23:01 +0100)]
apm821xx: MBL: fix kernel/apollo3g.dtb artifact build

The name for the artifact should have been apollo3g.dtb
and not kernel.dtb.

Fixes: 908bdbfce9f9 ("apm821xx: utilize build ARTIFACTs")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agompc85xx: add kernel 4.19 support
Pawel Dembicki [Tue, 1 Jan 2019 11:16:32 +0000 (11:16 +0000)]
mpc85xx: add kernel 4.19 support

Copied config from 4.14

Add patches for 4.19

Drop patch 103-powerpc-fix-build-cross32ar.patch,
because issue was fixed in upstream.

Compiled: generic p1020
Compiled and tested: (unofficial) P2020, TP-Link TL-WDR4900

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agokernel: 4.19: kmod-ptp-gianfar follow upstream changes
Pawel Dembicki [Wed, 2 Jan 2019 12:30:37 +0000 (13:30 +0100)]
kernel: 4.19: kmod-ptp-gianfar follow upstream changes

This patch deprecates the kmod-ptp-gianfar package and
introduces kmod-ptp-qoriq for 4.19+ in its place. This
has become necessary due to the linux kernel commit
ceefc71d4c05 ("ptp: rework gianfar_ptp as QorIQ common PTP driver")

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agompc85xx: tl-wdr4900-v1: convert to mtdsplit image
Pawel Dembicki [Thu, 3 Jan 2019 16:08:51 +0000 (16:08 +0000)]
mpc85xx: tl-wdr4900-v1: convert to mtdsplit image

Currently, the image creation process for the TP-Link tl-wdr4900-v1
needs a fixed sized kernel and places the rootfs partition at a
fixed offset. With the upcoming move to 4.19 the kernel will no
longer fit into the existing allocated space for the kernel
partition.

This patch converts the device to utilize the established
tplink,firmware mtdsplitter, which can deal with a dynamic
kernel/rootfs size.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agoath79: add support for devolo WiFi pro 1200i
David Bauer [Tue, 1 Jan 2019 18:17:23 +0000 (19:17 +0100)]
ath79: add support for devolo WiFi pro 1200i

Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
6 months agoath79: add support for devolo WiFi pro 1750i
David Bauer [Tue, 1 Jan 2019 18:17:22 +0000 (19:17 +0100)]
ath79: add support for devolo WiFi pro 1750i

Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
6 months agoramips: cleanup the RB750Gr3 support
Anton Arapov [Sat, 29 Dec 2018 00:28:27 +0000 (01:28 +0100)]
ramips: cleanup the RB750Gr3 support

Always enable the pwr led and use the usr led for boot status indication.

Rename nodes in the dts, to match what is recommend in the devicetree
specification.

Increase the maximum spi frequency to 20MHz and drop the m25p,chunked-io
which isn't required on mt7621.

Use the BTN_0 keycode for the mode button. This board doesn't have any
wireless.

Use a more descriptive label for the reset button and the GPIO enabling
the usb vcc supply.

Use the beeper kernel module for the buzzer.

Fix the pinmux to switch only pins used as GPIOs to the GPIO function.
Add support for the PoE enable GPIO to the userspace. The PoE power
status can be read via GPIO7. Since OpenWrt doesn't have support for
reading inputs from userspace, prepare only the pinmux for the GPIO.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agoramips: add RB750Gr3 native support
Anton Arapov [Sat, 29 Dec 2018 00:28:27 +0000 (01:28 +0100)]
ramips: add RB750Gr3 native support

This patch adds support of MikroTik RouterBOARD 750Gr3, without the need
to reflashing the bootloader.

Installation through RouterBoot follows the usual MikroTik method
https://openwrt.org/toh/mikrotik/common

Since the image isn't compatible with RouterBOARD 750Gr3 installations
which have replaced the bootloader, the former used userspace boardname
is not added to the SUPPORTED_DEVICES, to prevent a brick while trying
to upgrade to the image with native support.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agobusybox: Add ALTERNATIVES for findutils
Daniel F. Dickinson [Wed, 2 Jan 2019 10:55:30 +0000 (05:55 -0500)]
busybox: Add ALTERNATIVES for findutils

Currently busybox find and xargs conflict with the versions from
findutils package.  Fix this by using ALTERNATIVES in busybox
and the related findutils (from packages feed) commit.

The conflict is due to the binaries being in the the same place
in rootfs and opkg not being happy about that.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
6 months agokernel: Fix kmod-w1 dependency on hwmon-core for 4.19
Petr Štetiar [Tue, 18 Dec 2018 10:07:28 +0000 (11:07 +0100)]
kernel: Fix kmod-w1 dependency on hwmon-core for 4.19

kmod-w1 depends on kmod-hwmon-core since Linux 4.14

Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 months agokernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19
Petr Štetiar [Tue, 18 Dec 2018 10:08:16 +0000 (11:08 +0100)]
kernel: Fix rtc-ds1307 dependency on hwmon-core for 4.19

It seems, that since Linux 4.18-rc1 rtc-ds1307 depends on hwmon-core.

 commit 6b583a64fd1e019fd01626b46892ebf2361951c5
 Author: Heiner Kallweit <hkallweit1@gmail.com>
 Date:   Wed Sep 27 22:41:26 2017 +0200

    rtc: ds1307: simplify hwmon config

    We don't have to define an extra config symbol, IS_REACHABLE does
    what we need. And having this config symbol just to save the few
    bytes of hwmon support on non-DS3231 chips isn't worth it IMO
    (especially as the symbol is set per default).

While at it, use the same dependency check for `kmod-regmap` as well, so
it's future proof as well.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 months agofirewall: update to latest git HEAD
Hans Dedecker [Thu, 3 Jan 2019 16:04:52 +0000 (17:04 +0100)]
firewall: update to latest git HEAD

70f8785 zones: add zone identifying local traffic in raw OUTPUT chain
6920de7 utils: Free args in __fw3_command_pipe()
6ba9105 options: redirects: Fix possible buffer overflows

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agoath79: merge cases in 02_network
Paul Wassi [Wed, 2 Jan 2019 12:23:51 +0000 (13:23 +0100)]
ath79: merge cases in 02_network

Merge some duplicate cases in /etc/board.d/02_network

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 months agobuild: Drop user/group ID/name from sysupgrade.tar
Sven Eckelmann [Thu, 6 Dec 2018 10:23:00 +0000 (11:23 +0100)]
build: Drop user/group ID/name from sysupgrade.tar

Tar will automatically record the user/group ID and name for
files/directories. This reduces the reproducibility of the sysupgrade.tar
because most of the people don't use the same username as the OpenWrt
buildserver.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agobuild: Use stable file ordering in sysupgrade.tar
Sven Eckelmann [Thu, 6 Dec 2018 10:09:18 +0000 (11:09 +0100)]
build: Use stable file ordering in sysupgrade.tar

The file ordering in the current sysupgrade depends on the order of file in
a filesystem. This is often already in a sane (alphabetical order) but this
is not always the case. For example, the OpenWrt build servers return a
different ordering.

This breaks the reproducibility of the sysupgrade tarballs significantly
and also resulted in images which cannot be used for upgrades on devices
like the OpenMesh A42/A62.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
6 months agouboot-envtools: Add domywifi dw33d support
shanpo [Fri, 21 Dec 2018 05:11:17 +0000 (13:11 +0800)]
uboot-envtools: Add domywifi dw33d support

Signed-off-by: shanpo <jwdsccd@gmail.com>
6 months agouboot-envtools: ipq40xx: Configuration for GL.iNet GL-B1300
Ibrahim Tachijian [Wed, 10 Oct 2018 09:50:53 +0000 (11:50 +0200)]
uboot-envtools: ipq40xx: Configuration for GL.iNet GL-B1300

This commit adds the nescessary settings to allow reading the uboot environment variables on the GL.iNet GL-B1300 board.

Signed-off-by: Ibrahim Tachijian <barhom@netsat.se>
6 months agox86: enable kmod-bnx2 on 64-bit by default
Alberto Bursi [Sun, 23 Dec 2018 05:41:39 +0000 (06:41 +0100)]
x86: enable kmod-bnx2 on 64-bit by default

Gigabit ethernet adapters using BCM5706/5708/5709/5716 chipset are
common on servers and as easy/cheap to get as Intel based ones.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
6 months agokernel: mtd: add support for EN25QH64 in spi-nor.c
Roger Pueyo Centelles [Mon, 24 Dec 2018 14:39:32 +0000 (15:39 +0100)]
kernel: mtd: add support for EN25QH64 in spi-nor.c

The Eon EN25QH64 is a 64 Mbit SPI NOR flash memory chip. Its 32, 128 and
256 Mbits siblings are supported upstream but this particular size wasn't.
This commit includes patches for kernels 4.14 and 4.19.

Tested on a COMFAST CF-E120A v3 (ath79).

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
6 months agohostapd: update to version 2018-12-02 (2.7)
Hauke Mehrtens [Mon, 10 Dec 2018 22:13:42 +0000 (23:13 +0100)]
hostapd: update to version 2018-12-02 (2.7)

This updates hostapd to version the git version from 2018-12-02 which
matches the 2.7 release.

The removed patches were are already available in the upstream code, one
additional backport is needed to fix a compile problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
6 months agofstools: update to the latest master branch
Rafał Miłecki [Wed, 2 Jan 2019 06:13:19 +0000 (07:13 +0100)]
fstools: update to the latest master branch

This is a big block(d) cleanup with new feature of generating "mount"
hotplug.d events.

It's an important update for those who were using mountd in the
pre-18.06 releases. Due to the mountd being replaced with blockd a
support for "mountd" hotplug.d events has been lost. It broke all kind
of shell scripts that were e.g. managing services depending on an
external USB drive availability.

This basically (re-)adds support for calling /etc/hotplug.d/mount/
scripts with ACTION ("add" or "remove") and DEVICE set.

af93f4b block(d): improve hotplug.d "mount" events for the autofs
3bb3352 blockd: unmount device explicitly when it disappears
28753b3 block: remove target directory after unmounting
c8c7ca5 block: cleanup handling "start" action of the "autofs" command
f1bb762 block: make blockd_notify() return an int instead of void
71c2bde block: generate hotplug.d mount events
30f5096 block: validate amount of arguments for the "autofs" command
dc6a462 blockd: don't reparse blob msg in the vlist callbacks
f6a9686 blockd: don't unmount device when removing it from the list
1913fea block: don't duplicate unmounting code in the mount_action()
6b445fa block: make umount_device() function more generic
a778468 block: don't duplicate mounting code in the mount_device()
5dc631d block: simplify code picking mount target directory
2971779 block: move blockd_notify() call out of the conditional blocks
b86bd6e block: fix formatting & indent in the mount_device()
e12c0d6 fstools: use EXIT_FAILURE when indicating error on exit
091aa3d fstools: guard usage of WEXITSTATUS

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
6 months agoglibc: update to latest 2.27 commit (BZ #24027, BZ #23927)
Hans Dedecker [Tue, 1 Jan 2019 14:30:28 +0000 (15:30 +0100)]
glibc: update to latest 2.27 commit (BZ #24027, BZ #23927)

3981fc3453 malloc: Always call memcpy in _int_realloc [BZ #24027]
f6d0e8c36f Fix rwlock stall with PREFER_WRITER_NONRECURSIVE_NP (bug 23861)
2794474c65 powerpc: Add missing CFI register information (bug #23614)
d8ca7a0c71 Fix _dl_profile_fixup data-dependency issue (Bug 23690)
f1e211096b inet/tst-if_index-long: New test case for CVE-2018-19591 [BZ #23927]
4e9f34e54f support: Implement <support/descriptors.h> to track file descriptors
e75481a7a7 support: Close original descriptors in support_capture_subprocess
0f79dc0be3 support_quote_string: Do not use str parameter name
6b2dd53aa0 support: Implement support_quote_string
50477165b9 malloc: Add another test for tcache double free check.
4b246928bd malloc: tcache double free check

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 months agoath79: align GL-AR750S boardname to other GL.iNet devices
Christoph Krapp [Tue, 1 Jan 2019 12:03:20 +0000 (12:03 +0000)]
ath79: align GL-AR750S boardname to other GL.iNet devices

As the official device name is GL-AR750S, rename the board accordingly.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
6 months agoapm821xx: sata: boot-part feature integration
Christian Lamparter [Thu, 27 Dec 2018 18:12:23 +0000 (19:12 +0100)]
apm821xx: sata: boot-part feature integration

This patch adds the boot-part feature to the apm82181 sata target.
This makes it possible to configure the boot partition size with
the generic CONFIG_TARGET_KERNEL_PARTSIZE symbol.

Please note: For people using custom images: Just like with
CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause
sysupgrade to repartition the device!

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoapm821xx: use bin file extension for sysupgrade-tar images
Christian Lamparter [Thu, 27 Dec 2018 22:02:18 +0000 (23:02 +0100)]
apm821xx: use bin file extension for sysupgrade-tar images

Use the file extension bin for sysupgrade-tar images with
metadata to unify the file extension across the target/tree.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoapm821xx: utilize build ARTIFACTs
Christian Lamparter [Thu, 27 Dec 2018 21:56:08 +0000 (22:56 +0100)]
apm821xx: utilize build ARTIFACTs

The exported kernel dtbs can be build as artifacts.
This way, the MyBook Live's DTB is not generated twice.

While at it, give the artifacts their proper name.
For the wndr4700 use the "device-tree" partition name and
for the MyBook Live: "apollo3g.dtb" to match the mbl_boot.scr.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agoipq806x: add support for Buffalo WXR-2533DHP
INAGAKI Hiroshi [Mon, 24 Dec 2018 06:20:25 +0000 (15:20 +0900)]
ipq806x: add support for Buffalo WXR-2533DHP

Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.

The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.

specifications:

- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
  - J3: Vcc, GND, TX, RX from USB port side
  - 115200n8

Boot instructions for the initramfs image:

1. Prepare the TFTP server with the initramfs image renamed to
   "wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
   The WXR-2533DHP will grab the image from TFTP server and will boot it.

Flashing instructions:

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
6 months agobase-files: allow non-standard rootfs volume name in UBI in sysupgrade
INAGAKI Hiroshi [Tue, 1 Jan 2019 00:15:34 +0000 (09:15 +0900)]
base-files: allow non-standard rootfs volume name in UBI in sysupgrade

This commit allows to use non-standard UBI volume name as the rootfs
volume in sysupgrade.

ex.:
  The U-Boot on Buffalo WXR-2533DHP checks existence and checksum of
  "ubi_rootfs" volume when booting, so this name is required.

OpenWrt currently provides several patches:

490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
491-ubi-auto-create-ubiblock-device-for-rootfs.patch
492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch

to facilitate ubi rootfs automount. However the upstream kernel
also supports the means of booting from a fully custom ubi
partition name and ubi volume name via bootargs/kernel's cmdline
parameters:

ubi.mtd=mtd_partition_name
ubi.block=rootfs_volume_name
root=/dev/ubiblock$X_$Y

For more information and examples visit the wiki over at linux-mtd:
<http://www.linux-mtd.infradead.org/faq/ubifs.html>
<http://www.linux-mtd.infradead.org/doc/ubi.html>

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agoipq806x: add ramdisk feature
INAGAKI Hiroshi [Sun, 30 Dec 2018 03:01:41 +0000 (12:01 +0900)]
ipq806x: add ramdisk feature

This commits adds the "ramdisk" feature to ipq806x target. The
main driving force behind this decision is to facilitate the
installation of OpenWrt on some locked IPQ806x devices.

Examples:

- NEC Aterm WG2600HP

  The U-Boot on WG2600HP is protected with a password which prevents
  users from gaining access to the u-boot prompt in order to install
  the images from there.

  Therefore, on this device, installing OpenWrt by the user involves
  changing the bootcmd as follows so that WG2600HP downloads and
  executes initramfs image from TFTP server.

  ex.:
    bootcmd="ping ${serverip} && tftpboot 0x44000000 wg2600hp-initramfs.bin; bootipq"

- Buffalo WXR-2533DHP

  The U-Boot on WXR-2533DHP has built-in firmware recovery mode.
  It's activated by holding the "AOSS" button during boot. This
  will trigger the device to download the firmware from an TFTP
  server and booting from it. By using this, the user  can the
  install OpenWrt firmware without having access to the UART
  console.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
6 months agokernel: Add missing symbols to 4.19
Christian Lamparter [Sat, 29 Dec 2018 20:05:09 +0000 (21:05 +0100)]
kernel: Add missing symbols to 4.19

Tested with apm82181 and ipq40xx minimal image versions.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
6 months agobusybox: update to 1.30.0
Hannu Nyman [Mon, 31 Dec 2018 13:29:50 +0000 (15:29 +0200)]
busybox: update to 1.30.0

Update busybox to 1.30.0.
Refresh patches.
Leave new features disabled by default.

Config refreshed via:

  cd package/utils/busybox/config/
  ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0

  make package/busybox/compile

  cd package/utils/busybox
  ./convert_defaults.pl < ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
6 months agoath79: fix case statement in 01_leds
Paul Wassi [Tue, 1 Jan 2019 00:35:17 +0000 (01:35 +0100)]
ath79: fix case statement in 01_leds

Fix a missing 'end-of-case' recently introduced in 01_leds

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 months agoath79: rework elecom-header recipe
Mathias Kresin [Mon, 31 Dec 2018 15:41:07 +0000 (16:41 +0100)]
ath79: rework elecom-header recipe

Replace the code with a more readable version. Rename the recipe
to reflect the real usecase.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
6 months agotreewide: fix spaces vs. tabs
Paul Wassi [Mon, 31 Dec 2018 15:15:06 +0000 (16:15 +0100)]
treewide: fix spaces vs. tabs

Fix spaces vs. tabs issues in ath79 and ramips.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 months agoath79: tweak the position of factory partition for wr818
Rosy Song [Fri, 7 Dec 2018 03:41:57 +0000 (11:41 +0800)]
ath79: tweak the position of factory partition for wr818

The 'factory' partition will move to 0x50000-0x60000 in 2019. As
the webserver in bootloader is compatible with different mtdlayout,
all the users still can upgrade firmware whatever on ath79 or ar71xx.

Signed-off-by: Rosy Song <rosysong@rosinson.com>
6 months agoath79: add support for COMFAST CF-E110N
Roger Pueyo Centelles [Mon, 10 Dec 2018 14:44:56 +0000 (15:44 +0100)]
ath79: add support for COMFAST CF-E110N

This patch adds support for the COMFAST CF-E110N, an outdoor wireless
CPE with two Ethernet ports and a 802.11bgn radio.

Specifications:

 - 650/400/216 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, both with PoE-in support
 - 64 MB of RAM (DDR2)
 - 16 MB of FLASH
 - 2T2R 2.4 GHz, up to 26 dBm
 - 11 dBi built-in antenna
 - POWER/LAN/WAN/WLAN green LEDs
 - 4x RSSI LEDs (2x red, 2x green)
 - UART (115200 8N1) and GPIO (J9) headers on PCB

Flashing instructions:

 The original firmware is based on OpenWrt so a sysupgrade image can be
 installed via the stock web GUI. Settings from the original firmware
 will be saved and restored on the new want, so a factory reset will be
 needed: once the new firmware is flashed, perform the factory reset by
 pushing the reset button several times during the boot process, while the
 WAN LED flashes, until it starts flashing quicker.

 The U-boot bootloader contains a recovery HTTP server to upload the
 firmware. Push the reset button while powering the device on and keep it
 pressed for >10 seconds. The recovery page will be at http://192.168.1.1

Notes:

 The device is advertised, sold and labeled as "CF-E110N", but the
 bootloader and the stock firmware identify it as "v2".

Acknowledgments:

 Petr Štetiar <ynezz@true.cz>
 Sebastian Kemper <sebastian_ml@gmx.net>
 Chuanhong Guo <gch981213@gmail.com>

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[drop unused labels from devicetree source file]
Signed-off-by: Mathias Kresin <dev@kresin.me>