From 6c56e968c1b3601bfebff7c60683652d85d92c62 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Sat, 16 Dec 2017 15:43:02 +0100 Subject: [PATCH] ar71xx: fix TP-Link Archer C7 v4 switch LEDs Match mapping of the switch LEDs according to the TP-Link firmware behavior. LAN port 1 triggers the most right LAN LED, LAN port 2 the second LAN LED from the right and so on. Signed-off-by: David Bauer --- .../ar71xx/base-files/etc/board.d/01_leds | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index fac9dfa7ab..fb1f29dcfa 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -58,8 +58,7 @@ sc1750|\ sc450) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; -archer-c25-v1|\ -archer-c7-v4) +archer-c25-v1) ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" @@ -67,12 +66,6 @@ archer-c7-v4) ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - case "$board" in - archer-c7-v4) - ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1" - ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1" - ;; - esac ;; archer-c58-v1|\ archer-c59-v1|\ @@ -782,6 +775,17 @@ archer-c7) ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt" ;; +archer-c7-v4) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" + ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02" + ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan4" "switch0" "0x04" + ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan3" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan2" "switch0" "0x10" + ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan1" "switch0" "0x20" + ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1" + ;; tl-wpa8630) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" -- 2.30.2