From e3bf92edf5564cf72de8234b32364f0d4919524f Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Fri, 23 Mar 2018 14:59:39 +0900 Subject: [PATCH] ramips: fix switch and MAC address for WHR-G300N WHR-G300N has 5 ethernet ports (lan: 4, wan: 1), but there was no correct configuration in 02_network script and 6 ports was configured on the switch. Also, since the MAC address was not acquired from factory partition, incorrect values was set to LAN and WAN interfaces. This commit fixes these issues. Signed-off-by: INAGAKI Hiroshi --- target/linux/ramips/base-files/etc/board.d/02_network | 4 +++- target/linux/ramips/dts/WHR-G300N.dts | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 03f718ee30..4441b2293e 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ramips_setup_interfaces() u7621-06-256M-16M|\ vr500|\ wf-2881|\ + whr-g300n|\ witi|\ wl-wn575a3|\ wndr3700v5|\ @@ -440,7 +441,8 @@ ramips_setup_macs() e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; - gl-mt300n-v2) + gl-mt300n-v2|\ + whr-g300n) wan_mac=$(mtd_get_mac_binary factory 4) ;; hc5*61|\ diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts index da861ce66e..a7c28341b2 100644 --- a/target/linux/ramips/dts/WHR-G300N.dts +++ b/target/linux/ramips/dts/WHR-G300N.dts @@ -107,6 +107,10 @@ }; }; +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + &esw { mediatek,portmap = <0x2f>; }; -- 2.30.2