brcm63xx: rename target to bcm63xx
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Sat, 8 Feb 2020 19:33:30 +0000 (20:33 +0100)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 14 Feb 2020 13:10:51 +0000 (14:10 +0100)
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
1006 files changed:
package/kernel/broadcom-wl/Makefile
package/kernel/linux/modules/other.mk
package/kernel/mac80211/broadcom.mk
package/system/mtd/src/Makefile
target/linux/bcm63xx/Makefile [new file with mode: 0644]
target/linux/bcm63xx/base-files/etc/board.d/01_leds [new file with mode: 0755]
target/linux/bcm63xx/base-files/etc/board.d/02_network [new file with mode: 0755]
target/linux/bcm63xx/base-files/etc/diag.sh [new file with mode: 0644]
target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom [new file with mode: 0644]
target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc [new file with mode: 0644]
target/linux/bcm63xx/base-files/lib/upgrade/platform.sh [new file with mode: 0644]
target/linux/bcm63xx/config-4.14 [new file with mode: 0644]
target/linux/bcm63xx/config-4.19 [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm3368.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6318.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm63268-inteno-vg50.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm63268.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6328.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338gw.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338w.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6338-d-link-dsl-2640u.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6338-dynalink-rta1320.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6338.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6345.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-belkin-f5d7633.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348r.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-comtrend-ct-5365.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-davolink-dv-201amr.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-dynalink-rta1025w.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-netgear-dg834g-v4.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-sagem-fast-2404.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-sagem-fast-2604.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-tecom-gw6000.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-telsey-cpva502plus.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-telsey-magic.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348-usrobotics-usr9108.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6348.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-alcatel-rg100a.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-comtrend-ct-6373.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-d-link-dsl-2650u.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-pirelli-a226g.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-pirelli-a226m.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-pirelli-agpf-s0.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6358.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6362.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg622.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6368.dtsi [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts [new file with mode: 0644]
target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts [new file with mode: 0644]
target/linux/bcm63xx/generic/target.mk [new file with mode: 0644]
target/linux/bcm63xx/image/Makefile [new file with mode: 0644]
target/linux/bcm63xx/image/README.images-bcm63xx [new file with mode: 0644]
target/linux/bcm63xx/image/bcm63xx.mk [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/Makefile [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.c [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/LzmaTypes.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/Makefile [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/board.c [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/cache.c [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/cache.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/cacheops.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/config.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/cp0regdef.h [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/head.S [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/loader.c [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/loader.lds [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/loader2.lds [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/lzma-data.lds [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/printf.c [new file with mode: 0644]
target/linux/bcm63xx/image/lzma-loader/src/printf.h [new file with mode: 0644]
target/linux/bcm63xx/modules.mk [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/501-board-NB4.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/508-board_hw553.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/528-board_nb6.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/534-board_hw556.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/565-board_hw520.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/574-board_HG622.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/598-board_sr102.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/800-wl_exports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/309-cfe_version_mod.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/310-cfe_simplify_detection.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/351-set-board-usbh-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/400-bcm963xx_flashmap.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/427-boards_probe_switch.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/500-board-D4PW.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/501-board-NB4.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/502-board-96338W2_E7T.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/503-board-CPVA642.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/505-board_spw500v.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/506-board_gw6200_gw6000.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/507-board-MAGIC.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/508-board_hw553.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/509-board_rta1320_16m.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/510-board_spw303v.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/511-board_V2500V.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/512-board_BTV2110.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/514-board_ct536_ct5621.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/516-board_96348A-122.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/519_board_CPVA502plus.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/525-board_96348w3.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/526-board_CT6373-1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/528-board_nb6.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/529-board_fast2604.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/530-board_A4001N1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/531-board_AR-5387un.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/532-board_AR-5381u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/533-board_rta770bw.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/534-board_hw556.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/535-board_rta770w.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/536-board_fast2704.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/537-board_fast2504n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/555-board_96318ref.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/556-board_96318ref_p300.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/557-board_bcm963269bhr.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/558-board_AR1004G.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/559-board_vw6339gu.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/560-board_963268gu_p300.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/561-board_WAP-5813n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/562-board_VR-3025u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/563-board_VR-3025un.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/565-board_hw520.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/566-board_A4001N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/569-board_homehub2a.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/570-board_HG655b.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/571-board_fast2704n.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/572-board_VR-3026e.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/573-board_R5010UNv2.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/574-board_HG622.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/575-board_EVG2000.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/576-board_AV4202N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/577-board_VH4032N.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/578-board_R1000H.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/579-board_AR-5315u.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/580-board_AD1018.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/598-board_sr102.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/800-wl_exports.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [new file with mode: 0644]
target/linux/bcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch [new file with mode: 0644]
target/linux/bcm63xx/profiles/default.mk [new file with mode: 0644]
target/linux/bcm63xx/smp/config-default [new file with mode: 0644]
target/linux/bcm63xx/smp/target.mk [new file with mode: 0644]
target/linux/brcm63xx/Makefile [deleted file]
target/linux/brcm63xx/base-files/etc/board.d/01_leds [deleted file]
target/linux/brcm63xx/base-files/etc/board.d/02_network [deleted file]
target/linux/brcm63xx/base-files/etc/diag.sh [deleted file]
target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom [deleted file]
target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc [deleted file]
target/linux/brcm63xx/base-files/lib/upgrade/platform.sh [deleted file]
target/linux/brcm63xx/config-4.14 [deleted file]
target/linux/brcm63xx/config-4.19 [deleted file]
target/linux/brcm63xx/dts/bcm3368-netgear-cvg834g.dts [deleted file]
target/linux/brcm63xx/dts/bcm3368.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm63168-sky-sr102.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318-sagem-fast-2704n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6318.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts [deleted file]
target/linux/brcm63xx/dts/bcm63268-inteno-vg50.dts [deleted file]
target/linux/brcm63xx/dts/bcm63268.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-adb-a4001n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-adb-a4001n1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-brcm-bcm963281tan.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-brcm-bcm96328avng.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5381u.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5387un.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-nucom-r5010un-v2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts [deleted file]
target/linux/brcm63xx/dts/bcm6328.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338gw.dts [deleted file]
target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338w.dts [deleted file]
target/linux/brcm63xx/dts/bcm6338-d-link-dsl-2640u.dts [deleted file]
target/linux/brcm63xx/dts/bcm6338-dynalink-rta1320.dts [deleted file]
target/linux/brcm63xx/dts/bcm6338.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6345-dynalink-rta770bw.dts [deleted file]
target/linux/brcm63xx/dts/bcm6345-dynalink-rta770w.dts [deleted file]
target/linux/brcm63xx/dts/bcm6345.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6348-asmax-ar-1004g.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-belkin-f5d7633.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348r.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-bt-voyager-2110.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-comtrend-ct-5365.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-comtrend-ct-536plus.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-davolink-dv-201amr.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-dynalink-rta1025w.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-inventel-livebox-1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-netgear-dg834g-v4.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-sagem-fast-2404.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-sagem-fast-2604.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-tecom-gw6000.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-tecom-gw6200.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-telsey-cpva502plus.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-telsey-magic.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348-usrobotics-usr9108.dts [deleted file]
target/linux/brcm63xx/dts/bcm6348.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6358-alcatel-rg100a.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-bt-home-hub-2-a.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-comtrend-ct-6373.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-d-link-dsl-2650u.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg553.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-pirelli-a226g.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-pirelli-a226m.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-pirelli-agpf-s0.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358-telsey-cpva642.dts [deleted file]
target/linux/brcm63xx/dts/bcm6358.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts [deleted file]
target/linux/brcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts [deleted file]
target/linux/brcm63xx/dts/bcm6362-sagem-fast-2504n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6362.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6368-actiontec-r1000h.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-adb-av4202n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025u.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025un.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3026e.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg622.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-observa-vh4032n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts [deleted file]
target/linux/brcm63xx/dts/bcm6368.dtsi [deleted file]
target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts [deleted file]
target/linux/brcm63xx/dts/bcm6369-netgear-evg2000.dts [deleted file]
target/linux/brcm63xx/generic/target.mk [deleted file]
target/linux/brcm63xx/image/Makefile [deleted file]
target/linux/brcm63xx/image/README.images-bcm63xx [deleted file]
target/linux/brcm63xx/image/bcm63xx.mk [deleted file]
target/linux/brcm63xx/image/lzma-loader/Makefile [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.c [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/LzmaTypes.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/Makefile [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/board.c [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/cache.c [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/cache.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/cacheops.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/config.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/cp0regdef.h [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/head.S [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/loader.c [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/loader.lds [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/loader2.lds [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/lzma-data.lds [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/printf.c [deleted file]
target/linux/brcm63xx/image/lzma-loader/src/printf.h [deleted file]
target/linux/brcm63xx/modules.mk [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch [deleted file]
target/linux/brcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch [deleted file]
target/linux/brcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/brcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/brcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/brcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/brcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch [deleted file]
target/linux/brcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch [deleted file]
target/linux/brcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch [deleted file]
target/linux/brcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch [deleted file]
target/linux/brcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch [deleted file]
target/linux/brcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch [deleted file]
target/linux/brcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch [deleted file]
target/linux/brcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch [deleted file]
target/linux/brcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch [deleted file]
target/linux/brcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch [deleted file]
target/linux/brcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch [deleted file]
target/linux/brcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [deleted file]
target/linux/brcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [deleted file]
target/linux/brcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [deleted file]
target/linux/brcm63xx/patches-4.14/309-cfe_version_mod.patch [deleted file]
target/linux/brcm63xx/patches-4.14/310-cfe_simplify_detection.patch [deleted file]
target/linux/brcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/brcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [deleted file]
target/linux/brcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [deleted file]
target/linux/brcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [deleted file]
target/linux/brcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [deleted file]
target/linux/brcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [deleted file]
target/linux/brcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch [deleted file]
target/linux/brcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [deleted file]
target/linux/brcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [deleted file]
target/linux/brcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch [deleted file]
target/linux/brcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [deleted file]
target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [deleted file]
target/linux/brcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [deleted file]
target/linux/brcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [deleted file]
target/linux/brcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [deleted file]
target/linux/brcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [deleted file]
target/linux/brcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.14/351-set-board-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [deleted file]
target/linux/brcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [deleted file]
target/linux/brcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [deleted file]
target/linux/brcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [deleted file]
target/linux/brcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [deleted file]
target/linux/brcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [deleted file]
target/linux/brcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [deleted file]
target/linux/brcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [deleted file]
target/linux/brcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [deleted file]
target/linux/brcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [deleted file]
target/linux/brcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [deleted file]
target/linux/brcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [deleted file]
target/linux/brcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch [deleted file]
target/linux/brcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch [deleted file]
target/linux/brcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [deleted file]
target/linux/brcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [deleted file]
target/linux/brcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [deleted file]
target/linux/brcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [deleted file]
target/linux/brcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [deleted file]
target/linux/brcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch [deleted file]
target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch [deleted file]
target/linux/brcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch [deleted file]
target/linux/brcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch [deleted file]
target/linux/brcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch [deleted file]
target/linux/brcm63xx/patches-4.14/400-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/brcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/brcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/brcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/brcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [deleted file]
target/linux/brcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch [deleted file]
target/linux/brcm63xx/patches-4.14/427-boards_probe_switch.patch [deleted file]
target/linux/brcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch [deleted file]
target/linux/brcm63xx/patches-4.14/500-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-4.14/501-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-4.14/502-board-96338W2_E7T.patch [deleted file]
target/linux/brcm63xx/patches-4.14/503-board-CPVA642.patch [deleted file]
target/linux/brcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/brcm63xx/patches-4.14/505-board_spw500v.patch [deleted file]
target/linux/brcm63xx/patches-4.14/506-board_gw6200_gw6000.patch [deleted file]
target/linux/brcm63xx/patches-4.14/507-board-MAGIC.patch [deleted file]
target/linux/brcm63xx/patches-4.14/508-board_hw553.patch [deleted file]
target/linux/brcm63xx/patches-4.14/509-board_rta1320_16m.patch [deleted file]
target/linux/brcm63xx/patches-4.14/510-board_spw303v.patch [deleted file]
target/linux/brcm63xx/patches-4.14/511-board_V2500V.patch [deleted file]
target/linux/brcm63xx/patches-4.14/512-board_BTV2110.patch [deleted file]
target/linux/brcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/514-board_ct536_ct5621.patch [deleted file]
target/linux/brcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/brcm63xx/patches-4.14/516-board_96348A-122.patch [deleted file]
target/linux/brcm63xx/patches-4.14/519_board_CPVA502plus.patch [deleted file]
target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/brcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/brcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/brcm63xx/patches-4.14/525-board_96348w3.patch [deleted file]
target/linux/brcm63xx/patches-4.14/526-board_CT6373-1.patch [deleted file]
target/linux/brcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/brcm63xx/patches-4.14/528-board_nb6.patch [deleted file]
target/linux/brcm63xx/patches-4.14/529-board_fast2604.patch [deleted file]
target/linux/brcm63xx/patches-4.14/530-board_A4001N1.patch [deleted file]
target/linux/brcm63xx/patches-4.14/531-board_AR-5387un.patch [deleted file]
target/linux/brcm63xx/patches-4.14/532-board_AR-5381u.patch [deleted file]
target/linux/brcm63xx/patches-4.14/533-board_rta770bw.patch [deleted file]
target/linux/brcm63xx/patches-4.14/534-board_hw556.patch [deleted file]
target/linux/brcm63xx/patches-4.14/535-board_rta770w.patch [deleted file]
target/linux/brcm63xx/patches-4.14/536-board_fast2704.patch [deleted file]
target/linux/brcm63xx/patches-4.14/537-board_fast2504n.patch [deleted file]
target/linux/brcm63xx/patches-4.14/555-board_96318ref.patch [deleted file]
target/linux/brcm63xx/patches-4.14/556-board_96318ref_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.14/557-board_bcm963269bhr.patch [deleted file]
target/linux/brcm63xx/patches-4.14/558-board_AR1004G.patch [deleted file]
target/linux/brcm63xx/patches-4.14/559-board_vw6339gu.patch [deleted file]
target/linux/brcm63xx/patches-4.14/560-board_963268gu_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.14/561-board_WAP-5813n.patch [deleted file]
target/linux/brcm63xx/patches-4.14/562-board_VR-3025u.patch [deleted file]
target/linux/brcm63xx/patches-4.14/563-board_VR-3025un.patch [deleted file]
target/linux/brcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch [deleted file]
target/linux/brcm63xx/patches-4.14/565-board_hw520.patch [deleted file]
target/linux/brcm63xx/patches-4.14/566-board_A4001N.patch [deleted file]
target/linux/brcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch [deleted file]
target/linux/brcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch [deleted file]
target/linux/brcm63xx/patches-4.14/569-board_homehub2a.patch [deleted file]
target/linux/brcm63xx/patches-4.14/570-board_HG655b.patch [deleted file]
target/linux/brcm63xx/patches-4.14/571-board_fast2704n.patch [deleted file]
target/linux/brcm63xx/patches-4.14/572-board_VR-3026e.patch [deleted file]
target/linux/brcm63xx/patches-4.14/573-board_R5010UNv2.patch [deleted file]
target/linux/brcm63xx/patches-4.14/574-board_HG622.patch [deleted file]
target/linux/brcm63xx/patches-4.14/575-board_EVG2000.patch [deleted file]
target/linux/brcm63xx/patches-4.14/576-board_AV4202N.patch [deleted file]
target/linux/brcm63xx/patches-4.14/577-board_VH4032N.patch [deleted file]
target/linux/brcm63xx/patches-4.14/578-board_R1000H.patch [deleted file]
target/linux/brcm63xx/patches-4.14/579-board_AR-5315u.patch [deleted file]
target/linux/brcm63xx/patches-4.14/580-board_AD1018.patch [deleted file]
target/linux/brcm63xx/patches-4.14/598-board_sr102.patch [deleted file]
target/linux/brcm63xx/patches-4.14/800-wl_exports.patch [deleted file]
target/linux/brcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch [deleted file]
target/linux/brcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [deleted file]
target/linux/brcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch [deleted file]
target/linux/brcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/brcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/brcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/brcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/brcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch [deleted file]
target/linux/brcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch [deleted file]
target/linux/brcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch [deleted file]
target/linux/brcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch [deleted file]
target/linux/brcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch [deleted file]
target/linux/brcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch [deleted file]
target/linux/brcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch [deleted file]
target/linux/brcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch [deleted file]
target/linux/brcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch [deleted file]
target/linux/brcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch [deleted file]
target/linux/brcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch [deleted file]
target/linux/brcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [deleted file]
target/linux/brcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [deleted file]
target/linux/brcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [deleted file]
target/linux/brcm63xx/patches-4.19/309-cfe_version_mod.patch [deleted file]
target/linux/brcm63xx/patches-4.19/310-cfe_simplify_detection.patch [deleted file]
target/linux/brcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/brcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [deleted file]
target/linux/brcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [deleted file]
target/linux/brcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [deleted file]
target/linux/brcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [deleted file]
target/linux/brcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [deleted file]
target/linux/brcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch [deleted file]
target/linux/brcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [deleted file]
target/linux/brcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [deleted file]
target/linux/brcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch [deleted file]
target/linux/brcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [deleted file]
target/linux/brcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [deleted file]
target/linux/brcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [deleted file]
target/linux/brcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [deleted file]
target/linux/brcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [deleted file]
target/linux/brcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [deleted file]
target/linux/brcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.19/351-set-board-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [deleted file]
target/linux/brcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [deleted file]
target/linux/brcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [deleted file]
target/linux/brcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [deleted file]
target/linux/brcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [deleted file]
target/linux/brcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [deleted file]
target/linux/brcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [deleted file]
target/linux/brcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [deleted file]
target/linux/brcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [deleted file]
target/linux/brcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [deleted file]
target/linux/brcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [deleted file]
target/linux/brcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [deleted file]
target/linux/brcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch [deleted file]
target/linux/brcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch [deleted file]
target/linux/brcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [deleted file]
target/linux/brcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [deleted file]
target/linux/brcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [deleted file]
target/linux/brcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [deleted file]
target/linux/brcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [deleted file]
target/linux/brcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch [deleted file]
target/linux/brcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch [deleted file]
target/linux/brcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch [deleted file]
target/linux/brcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch [deleted file]
target/linux/brcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch [deleted file]
target/linux/brcm63xx/patches-4.19/400-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/brcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/brcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [deleted file]
target/linux/brcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch [deleted file]
target/linux/brcm63xx/patches-4.19/427-boards_probe_switch.patch [deleted file]
target/linux/brcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch [deleted file]
target/linux/brcm63xx/patches-4.19/500-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-4.19/501-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-4.19/502-board-96338W2_E7T.patch [deleted file]
target/linux/brcm63xx/patches-4.19/503-board-CPVA642.patch [deleted file]
target/linux/brcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/brcm63xx/patches-4.19/505-board_spw500v.patch [deleted file]
target/linux/brcm63xx/patches-4.19/506-board_gw6200_gw6000.patch [deleted file]
target/linux/brcm63xx/patches-4.19/507-board-MAGIC.patch [deleted file]
target/linux/brcm63xx/patches-4.19/508-board_hw553.patch [deleted file]
target/linux/brcm63xx/patches-4.19/509-board_rta1320_16m.patch [deleted file]
target/linux/brcm63xx/patches-4.19/510-board_spw303v.patch [deleted file]
target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch [deleted file]
target/linux/brcm63xx/patches-4.19/512-board_BTV2110.patch [deleted file]
target/linux/brcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [deleted file]
target/linux/brcm63xx/patches-4.19/514-board_ct536_ct5621.patch [deleted file]
target/linux/brcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/brcm63xx/patches-4.19/516-board_96348A-122.patch [deleted file]
target/linux/brcm63xx/patches-4.19/519_board_CPVA502plus.patch [deleted file]
target/linux/brcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/brcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/brcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/brcm63xx/patches-4.19/525-board_96348w3.patch [deleted file]
target/linux/brcm63xx/patches-4.19/526-board_CT6373-1.patch [deleted file]
target/linux/brcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/brcm63xx/patches-4.19/528-board_nb6.patch [deleted file]
target/linux/brcm63xx/patches-4.19/529-board_fast2604.patch [deleted file]
target/linux/brcm63xx/patches-4.19/530-board_A4001N1.patch [deleted file]
target/linux/brcm63xx/patches-4.19/531-board_AR-5387un.patch [deleted file]
target/linux/brcm63xx/patches-4.19/532-board_AR-5381u.patch [deleted file]
target/linux/brcm63xx/patches-4.19/533-board_rta770bw.patch [deleted file]
target/linux/brcm63xx/patches-4.19/534-board_hw556.patch [deleted file]
target/linux/brcm63xx/patches-4.19/535-board_rta770w.patch [deleted file]
target/linux/brcm63xx/patches-4.19/536-board_fast2704.patch [deleted file]
target/linux/brcm63xx/patches-4.19/537-board_fast2504n.patch [deleted file]
target/linux/brcm63xx/patches-4.19/555-board_96318ref.patch [deleted file]
target/linux/brcm63xx/patches-4.19/556-board_96318ref_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.19/557-board_bcm963269bhr.patch [deleted file]
target/linux/brcm63xx/patches-4.19/558-board_AR1004G.patch [deleted file]
target/linux/brcm63xx/patches-4.19/559-board_vw6339gu.patch [deleted file]
target/linux/brcm63xx/patches-4.19/560-board_963268gu_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.19/561-board_WAP-5813n.patch [deleted file]
target/linux/brcm63xx/patches-4.19/562-board_VR-3025u.patch [deleted file]
target/linux/brcm63xx/patches-4.19/563-board_VR-3025un.patch [deleted file]
target/linux/brcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch [deleted file]
target/linux/brcm63xx/patches-4.19/565-board_hw520.patch [deleted file]
target/linux/brcm63xx/patches-4.19/566-board_A4001N.patch [deleted file]
target/linux/brcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch [deleted file]
target/linux/brcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch [deleted file]
target/linux/brcm63xx/patches-4.19/569-board_homehub2a.patch [deleted file]
target/linux/brcm63xx/patches-4.19/570-board_HG655b.patch [deleted file]
target/linux/brcm63xx/patches-4.19/571-board_fast2704n.patch [deleted file]
target/linux/brcm63xx/patches-4.19/572-board_VR-3026e.patch [deleted file]
target/linux/brcm63xx/patches-4.19/573-board_R5010UNv2.patch [deleted file]
target/linux/brcm63xx/patches-4.19/574-board_HG622.patch [deleted file]
target/linux/brcm63xx/patches-4.19/575-board_EVG2000.patch [deleted file]
target/linux/brcm63xx/patches-4.19/576-board_AV4202N.patch [deleted file]
target/linux/brcm63xx/patches-4.19/577-board_VH4032N.patch [deleted file]
target/linux/brcm63xx/patches-4.19/578-board_R1000H.patch [deleted file]
target/linux/brcm63xx/patches-4.19/579-board_AR-5315u.patch [deleted file]
target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch [deleted file]
target/linux/brcm63xx/patches-4.19/598-board_sr102.patch [deleted file]
target/linux/brcm63xx/patches-4.19/800-wl_exports.patch [deleted file]
target/linux/brcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch [deleted file]
target/linux/brcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [deleted file]
target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch [deleted file]
target/linux/brcm63xx/profiles/default.mk [deleted file]
target/linux/brcm63xx/smp/config-default [deleted file]
target/linux/brcm63xx/smp/target.mk [deleted file]

index 714cbab39cc252875f6881637499a2bcde001298..68581c27d07d7cfb0f7c66d2c0fafe69d60ac64c 100644 (file)
@@ -34,13 +34,13 @@ define Package/broadcom-wl/Default
   CATEGORY:=Kernel modules
   DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
   SUBMENU:=Proprietary BCM43xx WiFi driver
-  SUBMENUDEP:=(TARGET_bcm47xx||TARGET_brcm63xx)
+  SUBMENUDEP:=(TARGET_bcm47xx||TARGET_bcm63xx)
 endef
 
 define KernelPackage/brcm-wl/Default
   $(call Package/broadcom-wl/Default)
   SECTION:=kernel
-  DEPENDS:=@(TARGET_bcm47xx||TARGET_brcm63xx) +wireless-tools
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm63xx) +wireless-tools
   TITLE:=Kernel driver for BCM43xx chipsets
   FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
   AUTOLOAD:=$(call AutoProbe,wl)
index c79f1d9650fd4d8bb8069358b207f154ae2c5bb6..75495423087ac76f1168f6674283127e6fd9d96e 100644 (file)
@@ -418,7 +418,7 @@ $(eval $(call KernelPackage,softdog))
 define KernelPackage/ssb
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Silicon Sonics Backplane glue code
-  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_brcm63xx
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
   KCONFIG:=\
        CONFIG_SSB \
        CONFIG_SSB_B43_PCI_BRIDGE=y \
index 74d6b8d6ce261b50a972ce0078484cbf6b92dea6..c725c4924f555923302b50afa23a8efb9c6c2f81 100644 (file)
@@ -118,7 +118,7 @@ define KernelPackage/b43/config
 config PACKAGE_B43_USE_SSB
        select PACKAGE_kmod-ssb
        tristate
-       depends on !TARGET_bcm47xx && !TARGET_brcm63xx
+       depends on !TARGET_bcm47xx && !TARGET_bcm63xx
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
        default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 
@@ -347,7 +347,7 @@ define KernelPackage/b43legacy
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
   KCONFIG:= \
        CONFIG_HW_RANDOM=y
-  DEPENDS+= +kmod-mac80211 +!(TARGET_bcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_bcm47xx_mips74k +b43legacy-firmware
+  DEPENDS+= +kmod-mac80211 +!(TARGET_bcm47xx||TARGET_bcm63xx):kmod-ssb @!TARGET_bcm47xx_mips74k +b43legacy-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
   AUTOLOAD:=$(call AutoProbe,b43legacy)
   MENU:=1
index 7299d4d42fdb98cd01bf61f897f1be6a2df3a34f..7f06996e190667bc72bbaa790b95512552417986 100644 (file)
@@ -13,7 +13,7 @@ obj.gemini = $(obj.wrgg)
 obj.brcm = trx.o
 obj.bcm47xx = $(obj.brcm)
 obj.bcm53xx = $(obj.brcm) $(obj.seama)
-obj.brcm63xx = imagetag.o
+obj.bcm63xx = imagetag.o
 obj.ramips = $(obj.seama) $(obj.tpl) $(obj.wrg)
 obj.mvebu = linksys_bootcount.o
 obj.kirkwood = linksys_bootcount.o
diff --git a/target/linux/bcm63xx/Makefile b/target/linux/bcm63xx/Makefile
new file mode 100644 (file)
index 0000000..b31d86b
--- /dev/null
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2006-2019 OpenWrt.org
+# Copyright (C) 2016 LEDE project
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=bcm63xx
+BOARDNAME:=Broadcom BCM63xx
+SUBTARGETS:=generic smp
+FEATURES:=squashfs usb atm pci pcmcia usbgadget
+KERNEL_PATCHVER:=4.14
+KERNEL_TESTING_PATCHVER:=4.19
+MAINTAINER:=Jonas Gorski <jogo@openwrt.org>
+
+define Target/Description
+       Build firmware images for Broadcom based xDSL/routers
+       currently supports BCM6338, BCM6348 and BCM6358 based devices.
+       (e.g. Inventel Livebox, Siemens SE515, Neufbox 4)
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += swconfig kmod-gpio-button-hotplug
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/bcm63xx/base-files/etc/board.d/01_leds b/target/linux/bcm63xx/base-files/etc/board.d/01_leds
new file mode 100755 (executable)
index 0000000..dd1c565
--- /dev/null
@@ -0,0 +1,89 @@
+#!/bin/sh
+#
+# Copyright (C) 2013-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+actiontec,r1000h)
+       ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1"
+       ;;
+adb,a4001n)
+       ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
+       ;;
+adb,a4001n1)
+       ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0"
+       ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1"
+       ;;
+adb,av4202n)
+       ucidef_set_led_netdev "wlan0" "WLAN" "AV4202N:blue:wifi" "wlan0"
+       ;;
+bt,home-hub-2-a)
+       ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
+       ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
+       ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
+       ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
+       ;;
+comtrend,ar-5315u)
+       ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1"
+       ;;
+huawei,echolife-hg553)
+       ucidef_set_led_netdev "lan" "LAN" "HW553:blue:lan" "eth0"
+       ucidef_set_led_usbdev "usb1" "USB1" "HW553:red:hspa" "1-1"
+       ucidef_set_led_usbdev "usb2" "USB2" "HW553:blue:hspa" "1-2"
+       ;;
+huawei,echolife-hg556a-a|\
+huawei,echolife-hg556a-b|\
+huawei,echolife-hg556a-c)
+       ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
+       ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
+       ;;
+huawei,echolife-hg622)
+       ucidef_set_led_usbdev "usb" "USB" "HG622:green:usb" "1-2"
+       ;;
+huawei,echolife-hg655b)
+       ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
+       ;;
+inventel,livebox-1)
+       ucidef_set_led_netdev "lan" "LAN" "Livebox1:red:traffic" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
+       ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
+       ;;
+netgear,dgnd3700-v1)
+       ucidef_set_led_netdev "lan" "LAN" "DGND3700v1_3800B:green:lan" "eth0.1"
+       ucidef_set_led_netdev "wan" "WAN" "DGND3700v1_3800B:green:inet" "eth0.2"
+       ucidef_set_led_netdev "wlan0" "WIFI2G" "DGND3700v1_3800B:green:wifi2g" "wlan0"
+       ucidef_set_led_netdev "wlan1" "WIFI5G" "DGND3700v1_3800B:blue:wifi5g" "wlan1"
+       ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" "1-1"
+       ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front" "1-2"
+       ;;
+netgear,evg2000)
+       ucidef_set_led_netdev "lan" "LAN" "EVG2000:green:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "EVG2000:green:wan" "eth1"
+       ucidef_set_led_netdev "wlan0" "WIFI" "EVG2000:green:wireless" "wlan0"
+       ucidef_set_led_usbdev "usb1" "USB1" "EVG2000:green:voip1" "1-1"
+       ucidef_set_led_usbdev "usb2" "USB2" "EVG2000:green:voip2" "1-2"
+       ;;
+nucom,r5010un-v2)
+       ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
+       ;;
+sagem,fast-2704n)
+       ucidef_set_led_netdev "wan" "WAN" "F@ST2704N:green:inet" "eth0.2"
+       ;;
+sagem,fast-2704-v2)
+       ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
+       ;;
+sercomm,ad1018-nor)
+       ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
+       ;;
+telsey,cpva502plus)
+       ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0"
+       ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm63xx/base-files/etc/board.d/02_network b/target/linux/bcm63xx/base-files/etc/board.d/02_network
new file mode 100755 (executable)
index 0000000..7fa1514
--- /dev/null
@@ -0,0 +1,146 @@
+#!/bin/sh
+#
+# Copyright (C) 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+actiontec,r1000h|\
+dynalink,rta770bw|\
+dynalink,rta770w|\
+netgear,cvg834g|\
+netgear,evg2000|\
+t-com,speedport-w-303v|\
+t-com,speedport-w-500v)
+       ucidef_set_interface_lan "eth0"
+       ;;
+adb,a4001n1|\
+adb,a4001n|\
+adb,av4202n|\
+brcm,bcm963281tan|\
+brcm,bcm96328avng|\
+brcm,bcm96368mvngr|\
+comtrend,ar-5381u|\
+comtrend,ar-5387un|\
+comtrend,vr-3025u|\
+comtrend,vr-3025un|\
+comtrend,vr-3026e|\
+d-link,dsl-274xb-f1|\
+d-link,dsl-275xb-d1|\
+huawei,echolife-hg622|\
+huawei,echolife-hg655b|\
+nucom,r5010un-v2|\
+sagem,fast-2504n|\
+sagem,fast-2704-v2|\
+zyxel,p870hw-51a-v2)
+       ucidef_add_switch "switch0" \
+               "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0"
+       ;;
+alcatel,rg100a|\
+belkin,f5d7633|\
+brcm,bcm96348gw|\
+brcm,bcm96348gw-10|\
+brcm,bcm96348gw-11|\
+brcm,bcm96358vw|\
+brcm,bcm96358vw2|\
+bt,voyager-2500v-bb|\
+davolink,dv-201amr|\
+d-link,dsl-2650u|\
+dynalink,rta1025w|\
+netgear,dg834gt-pn|\
+pirelli,agpf-s0|\
+sagem,fast-2404|\
+telsey,magic|\
+tp-link,td-w8900gb|\
+usrobotics,usr9108)
+       ucidef_set_interfaces_lan_wan "eth1" "eth0"
+       ucidef_add_switch "switch0" \
+               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth1"
+       ;;
+asmax,ar-1004g|\
+brcm,bcm96338gw|\
+brcm,bcm96338w|\
+bt,voyager-2110|\
+comtrend,ct-5365|\
+comtrend,ct-536plus|\
+comtrend,ct-6373|\
+d-link,dsl-2640b-b|\
+d-link,dsl-2640u|\
+dynalink,rta1320|\
+netgear,dg834g-v4|\
+sagem,fast-2604|\
+telsey,cpva642)
+       ucidef_add_switch "switch0" \
+               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
+       ;;
+brcm,bcm963268bu-p300)
+       ucidef_add_switch "switch0" \
+               "0:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8t@eth0"
+       ;;
+brcm,bcm96368mvwg)
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "4:lan" "5:lan" "8t@eth0"
+       ;;
+bt,home-hub-2-a|\
+d-link,dsl-274xb-c2|\
+huawei,echolife-hg553|\
+huawei,echolife-hg556a-a|\
+huawei,echolife-hg556a-b|\
+huawei,echolife-hg556a-c)
+       ucidef_add_switch "switch0" \
+               "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
+       ;;
+comtrend,ar-5315u|\
+observa,vh4032n|\
+sagem,fast-2704n)
+       ucidef_add_switch "switch0" \
+               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
+       ;;
+comtrend,wap-5813n)
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
+       ;;
+d-link,dva-g3810bn-tl|\
+huawei,echolife-hg520v|\
+sfr,neufbox-4-foxconn-r1|\
+sfr,neufbox-4-sercomm-r0)
+       ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+       ucidef_add_switch "switch0" \
+               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth1"
+       ;;
+inteno,vg50)
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
+       ;;
+inventel,livebox-1|\
+telsey,cpva502plus)
+       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+       ;;
+netgear,dgnd3700-v1)
+       ucidef_add_switch "switch0" \
+               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "8t@eth0"
+       ;;
+sercomm,ad1018-nor)
+       ucidef_add_switch "switch0" \
+               "1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
+       ;;
+sfr,neufbox-6-sercomm-r0)
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
+       ;;
+sky,sr102)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "switch0" \
+               "0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
+       ;;
+*)
+       ucidef_set_interfaces_lan_wan "eth1" "eth0"
+       ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/bcm63xx/base-files/etc/diag.sh b/target/linux/bcm63xx/base-files/etc/diag.sh
new file mode 100644 (file)
index 0000000..4b6d8d6
--- /dev/null
@@ -0,0 +1,167 @@
+#!/bin/sh
+# Copyright (C) 2007-2013 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+set_state() {
+       case "$(board_name)" in
+       actiontec,r1000h)
+               status_led="R1000H:green:power"
+               ;;
+       adb,a4001n)
+               status_led="A4001N:green:power"
+               ;;
+       adb,a4001n1)
+               status_led="A4001N1:green:power"
+               ;;
+       adb,av4202n)
+               status_led="AV4202N:white:power"
+               ;;
+       asmax,ar-1004g)
+               status_led="AR1004G:green:power"
+               ;;
+       brcm,bcm963281tan)
+               status_led="963281TAN::power"
+               ;;
+       brcm,bcm96328avng)
+               status_led="96328avng::power"
+               ;;
+       brcm,bcm96348gw)
+               status_led="96348GW:green:power"
+               ;;
+       brcm,bcm96348gw-11)
+               status_led="96348GW-11:green:power"
+               ;;
+       bt,home-hub-2-a)
+               status_led="HOMEHUB2A:green:upgrading"
+               status_led2="HOMEHUB2A:blue:upgrading"
+               ;;
+       bt,voyager-2110)
+               status_led="V2110:power:green"
+               ;;
+       comtrend,ar-5315u)
+               status_led="AR-5315u:green:power"
+               ;;
+       comtrend,ar-5381u)
+               status_led="AR-5381u:green:power"
+               ;;
+       comtrend,ar-5387un)
+               status_led="AR-5387un:green:power"
+               ;;
+       comtrend,ct-536plus)
+               status_led="CT536_CT5621:green:power"
+               ;;
+       comtrend,vr-3025u)
+               status_led="VR-3025u:green:power"
+               ;;
+       comtrend,vr-3025un)
+               status_led="VR-3025un:green:power"
+               ;;
+       comtrend,vr-3026e)
+               status_led="VR-3026e:green:power"
+               ;;
+       comtrend,wap-5813n)
+               status_led="WAP-5813n:green:power"
+               ;;
+       d-link,dsl-2640b-b)
+               status_led="D-4P-W:green:power"
+               ;;
+       d-link,dsl-274xb-c2|\
+       d-link,dsl-274xb-f1)
+               status_led="dsl-274xb:green:power"
+               ;;
+       d-link,dsl-275xb-d1)
+               status_led="dsl-275xb:green:power"
+               ;;
+       dynalink,rta770bw)
+               status_led="RTA770BW:green:diag"
+               ;;
+       dynalink,rta770w)
+               status_led="RTA770W:green:diag"
+               ;;
+       huawei,echolife-hg520v)
+               status_led="HW520:green:net"
+               ;;
+       huawei,echolife-hg553)
+               status_led="HW553:blue:power"
+               ;;
+       huawei,echolife-hg556a-a|\
+       huawei,echolife-hg556a-b|\
+       huawei,echolife-hg556a-c)
+               status_led="HW556:red:power"
+               ;;
+       huawei,echolife-hg655b)
+               status_led="HW65x:green:power"
+               ;;
+       inventel,livebox-1)
+               status_led="Livebox1:red:adsl-fail-power"
+               ;;
+       netgear,cvg834g)
+               status_led="CVG834G:green:power"
+               ;;
+       netgear,dgnd3700-v1)
+               status_led="DGND3700v1_3800B:green:power"
+               ;;
+       netgear,evg2000)
+               status_led="EVG2000:green:power"
+               ;;
+       nucom,r5010un-v2)
+               status_led="R5010UNv2:green:power"
+               ;;
+       observa,vh4032n)
+               status_led="VH4032N:blue:power"
+               ;;
+       sagem,fast-2504n)
+               status_led="fast2504n:green:ok"
+               ;;
+       sagem,fast-2704n)
+               status_led2="F@ST2704N:red:power"
+               ;;
+       sagem,fast-2704-v2)
+               status_led="F@ST2704V2:green:power"
+               ;;
+       sercomm,ad1018-nor)
+               status_led="AD1018:green:power"
+               ;;
+       sky,sr102)
+               status_led="SR102:white:power"
+               status_led2="SR102:red:power"
+               ;;
+       t-com,speedport-w-303v)
+               status_led="spw303v:green:power+adsl"
+               ;;
+       t-com,speedport-w-500v)
+               status_led="SPW500V:green:power"
+               ;;
+       tecom,gw6200)
+               status_led="GW6200:green:line1"
+               status_led2="GW6200:green:tel"
+               ;;
+       telsey,cpva642)
+               status_led="CPVA642:green:power:"
+               ;;
+       zyxel,p870hw-51a-v2)
+               status_led="P870HW-51a:green:power"
+               ;;
+       esac
+
+       case "$1" in
+       preinit)
+               status_led_blink_preinit
+               ;;
+       failsafe)
+               status_led_blink_failsafe
+               ;;
+       preinit_regular)
+               status_led_blink_preinit_regular
+               ;;
+       done)
+               if [ "${status_led/power}" != "$status_led" ]; then
+                       status_led_on
+               else
+                       status_led_off
+               fi
+               ;;
+       esac
+}
diff --git a/target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/bcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
new file mode 100644 (file)
index 0000000..0e92481
--- /dev/null
@@ -0,0 +1,25 @@
+#!/bin/sh
+# Based on gabors ralink wisoc implementation.
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"rt2x00.eeprom" )
+       case $board in
+       huawei,echolife-hg556a-c)
+               caldata_extract "cal_data" 0x1fe00 0x200
+               ;;
+       huawei,echolife-hg622|\
+       huawei,echolife-hg655b)
+               caldata_extract "cal_data" 0x0 0x200
+               ;;
+       *)
+               caldata_die "board $board is not supported yet"
+               ;;
+       esac
+       ;;
+esac
diff --git a/target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm63xx/base-files/etc/uci-defaults/09_fix_crc
new file mode 100644 (file)
index 0000000..c33e56f
--- /dev/null
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+. /lib/functions.sh
+
+do_fixcrc() {
+       mtd fixtrx linux
+}
+
+case "$(board_name)" in
+       actiontec,r1000h|\
+       adb,a4001n|\
+       adb,a4001n1|\
+       brcm,bcm96328avng|\
+       brcm,bcm963281tan|\
+       bt,voyager-2110|\
+       bt,voyager-2500v-bb|\
+       comtrend,ar-5315u|\
+       comtrend,ar-5381u|\
+       comtrend,ar-5387un|\
+       comtrend,vr-3025u|\
+       comtrend,vr-3025un|\
+       comtrend,vr-3026e|\
+       comtrend,wap-5813n|\
+       comtrend,ct-6373|\
+       d-link,dsl-274xb-f1|\
+       dynalink,rta770bw|\
+       dynalink,rta770w|\
+       huawei,echolife-hg622|\
+       netgear,evg2000|\
+       nucom,r5010un-v2|\
+       observa,vh4032n|\
+       t-com,speedport-w-303v|\
+       telsey,cpva502plus|\
+       telsey,cpva642|\
+       telsey,magic|\
+       zyxel,p870hw-51a-v2)
+               do_fixcrc
+               ;;
+esac
diff --git a/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm63xx/base-files/lib/upgrade/platform.sh
new file mode 100644 (file)
index 0000000..5c9e2c2
--- /dev/null
@@ -0,0 +1,16 @@
+PART_NAME=linux
+platform_check_image() {
+       [ "$#" -gt 1 ] && return 1
+       case "$(get_magic_word "$1")" in
+               3600|3700|3800)
+                       # 6348GW-11 boards use openwrt-96348GW-11-squashfs-cfe.bin files
+                       return 0
+                       ;;
+               *)
+                       echo "Invalid image type. Please use only .bin files"
+                       return 1
+                       ;;
+       esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/bcm63xx/config-4.14 b/target/linux/bcm63xx/config-4.14
new file mode 100644 (file)
index 0000000..2a00195
--- /dev/null
@@ -0,0 +1,281 @@
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BCM6345_EXT_IRQ=y
+CONFIG_BCM6345_PERIPH_IRQ=y
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_3368=y
+CONFIG_BCM63XX_CPU_6318=y
+CONFIG_BCM63XX_CPU_63268=y
+CONFIG_BCM63XX_CPU_6328=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_CPU_6362=y
+CONFIG_BCM63XX_CPU_6368=y
+CONFIG_BCM63XX_EHCI=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_OHCI=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+# CONFIG_BCMA_DEBUG is not set
+# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
+# CONFIG_BCMA_DRIVER_MIPS is not set
+CONFIG_BCMA_DRIVER_PCI=y
+# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+# CONFIG_BCMA_HOST_SOC is not set
+CONFIG_BCM_NET_PHYLIB=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOARD_BCM63XX_DT=y
+CONFIG_BOARD_BCM963XX=y
+CONFIG_BOARD_LIVEBOX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_BMIPS=y
+CONFIG_CPU_BMIPS32_3300=y
+CONFIG_CPU_BMIPS4350=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_BCM63XX=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM63XX=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_LEDS_BCM6328=y
+CONFIG_LEDS_BCM6358=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_EXTERNAL_TIMER=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM63XX_PARTS=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PARSER_IMAGETAG=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM6318=y
+CONFIG_PINCTRL_BCM63268=y
+CONFIG_PINCTRL_BCM6328=y
+CONFIG_PINCTRL_BCM6348=y
+CONFIG_PINCTRL_BCM6358=y
+CONFIG_PINCTRL_BCM6362=y
+CONFIG_PINCTRL_BCM6368=y
+CONFIG_PINCTRL_BCM63XX=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RELAY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_BCM63XX=y
+CONFIG_SPI_BCM63XX_HSSPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SRCU=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_B53=y
+CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+CONFIG_SWCONFIG_B53_SPI_DRIVER=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWPHY=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_BMIPS=y
+CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
+CONFIG_SYS_HAS_CPU_BMIPS4350=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/bcm63xx/config-4.19 b/target/linux/bcm63xx/config-4.19
new file mode 100644 (file)
index 0000000..2a00195
--- /dev/null
@@ -0,0 +1,281 @@
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
+# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BCM6345_EXT_IRQ=y
+CONFIG_BCM6345_PERIPH_IRQ=y
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_3368=y
+CONFIG_BCM63XX_CPU_6318=y
+CONFIG_BCM63XX_CPU_63268=y
+CONFIG_BCM63XX_CPU_6328=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_CPU_6362=y
+CONFIG_BCM63XX_CPU_6368=y
+CONFIG_BCM63XX_EHCI=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_OHCI=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+# CONFIG_BCMA_DEBUG is not set
+# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
+# CONFIG_BCMA_DRIVER_MIPS is not set
+CONFIG_BCMA_DRIVER_PCI=y
+# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+# CONFIG_BCMA_HOST_SOC is not set
+CONFIG_BCM_NET_PHYLIB=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOARD_BCM63XX_DT=y
+CONFIG_BOARD_BCM963XX=y
+CONFIG_BOARD_LIVEBOX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_BMIPS=y
+CONFIG_CPU_BMIPS32_3300=y
+CONFIG_CPU_BMIPS4350=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_BCM63XX=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM63XX=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_LEDS_BCM6328=y
+CONFIG_LEDS_BCM6358=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_EXTERNAL_TIMER=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM63XX_PARTS=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PARSER_IMAGETAG=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM6318=y
+CONFIG_PINCTRL_BCM63268=y
+CONFIG_PINCTRL_BCM6328=y
+CONFIG_PINCTRL_BCM6348=y
+CONFIG_PINCTRL_BCM6358=y
+CONFIG_PINCTRL_BCM6362=y
+CONFIG_PINCTRL_BCM6368=y
+CONFIG_PINCTRL_BCM63XX=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RELAY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_BCM63XX=y
+CONFIG_SPI_BCM63XX_HSSPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SRCU=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_B53=y
+CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+CONFIG_SWCONFIG_B53_SPI_DRIVER=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWPHY=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_BMIPS=y
+CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
+CONFIG_SYS_HAS_CPU_BMIPS4350=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts b/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts
new file mode 100644 (file)
index 0000000..2b25d00
--- /dev/null
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+#include "bcm3368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Netgear CVG834G";
+       compatible = "netgear,cvg834g", "brcm,bcm3368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "CVG834G:green:power";
+                       gpios = <&gpio1 5 0>;
+                       default-state = "on";
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
+
+&uart1 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm3368.dtsi b/target/linux/bcm63xx/dts/bcm3368.dtsi
new file mode 100644 (file)
index 0000000..66cb6ab
--- /dev/null
@@ -0,0 +1,133 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm3368";
+
+       aliases {
+               pflash = &pflash;
+               gpio0 = &gpio0;
+               gpio1 = &gpio1;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi0 = &lsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       pflash: nor@1e000000 {
+               compatible = "cfi-flash";
+               reg = <0x1e000000 0x2000000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               status = "disabled";
+       };
+
+       ubus@fff00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               periph_intc: interrupt-controller@fff8c00c {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0xfff8c00c 0x8>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               ext_intc0: interrupt-controller@fff8c014 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfff8c014 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <25>, <26>, <27>, <28>;
+               };
+
+               gpio1: gpio-controller@fff8c080 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0xfff8c080 4>, <0xfff8c088 4>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ngpios = <8>;
+               };
+
+               gpio0: gpio-controller@fff8c084 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0xfff8c084 4>, <0xfff8c08c 4>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               uart0: serial@fff8c100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfff8c100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@fff8c120 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfff8c120 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <3>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@fff8c800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-spi";
+                       reg = <0xfff8c800 0x70c>;
+                       interrupts = <1>;
+                       /* clocks = <&clkctl 9>; */
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts b/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts
new file mode 100644 (file)
index 0000000..e47822a
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SKY SR102";
+       compatible = "sky,sr102", "brcm,bcm63168", "brcm,bcm63268";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 0>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan1_green {
+                       label = "SR102:green:lan1";
+                       gpios = <&pinctrl 1 1>;
+               };
+               power_red {
+                       label = "SR102:red:power";
+                       gpios = <&pinctrl 2 1>;
+               };
+               wifi_red {
+                       label = "SR102:red:wifi";
+                       gpios = <&pinctrl 3 1>;
+               };
+               inet_red {
+                       label = "SR102:red:inet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               inet_white {
+                       label = "SR102:white:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_white {
+                       label = "SR102:white:power";
+                       gpios = <&pinctrl 6 0>;
+                       default-state = "on";
+               };
+               wifi_white {
+                       label = "SR102:white:wifi";
+                       gpios = <&pinctrl 8 0>;
+               };
+               lan2_red {
+                       label = "SR102:red:lan2";
+                       gpios = <&pinctrl 9 1>;
+               };
+               lan3_red {
+                       label = "SR102:red:lan3";
+                       gpios = <&pinctrl 10 1>;
+               };
+               lan4_red {
+                       label = "SR102:red:lan4";
+                       gpios = <&pinctrl 11 1>;
+               };
+               lan1_red {
+                       label = "SR102:red:lan1";
+                       gpios = <&pinctrl 12 1>;
+               };
+               lan2_green {
+                       label = "SR102:green:lan2";
+                       gpios = <&pinctrl 13 0>;
+               };
+               lan3_green {
+                       label = "SR102:green:lan3";
+                       gpios = <&pinctrl 14 1>;
+               };
+               lan4_green {
+                       label = "SR102:green:lan4";
+                       gpios = <&pinctrl 15 1>;
+               };
+               hd_white {
+                       label = "SR102:white:hd";
+                       gpios = <&pinctrl 18 0>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts b/target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts
new file mode 100644 (file)
index 0000000..4edab64
--- /dev/null
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96318REF_P300 reference board";
+       compatible = "brcm,bcm96318ref-p300", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet {
+                       label = "96318REF_P300:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+
+               inet_fail {
+                       label = "96318REF_P300:red:inet-fail";
+                       gpios = <&pinctrl 9 1>;
+               };
+
+               post_failed {
+                       label = "96318REF_P300:red:post-failed";
+                       gpios = <&pinctrl 11 1>;
+               };
+
+               usb_pwron {
+                       label = "96318REF_P300::usb-pwron";
+                       gpios = <&pinctrl 13 1>;
+                       default-state = "on";
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_pwron>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref.dts b/target/linux/bcm63xx/dts/bcm6318-brcm-bcm96318ref.dts
new file mode 100644 (file)
index 0000000..f6136b5
--- /dev/null
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96318REF reference board";
+       compatible = "brcm,bcm96318ref", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet {
+                       label = "96318REF:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+
+               inet_fail {
+                       label = "96318REF:red:inet-fail";
+                       gpios = <&pinctrl 9 1>;
+               };
+
+               post_failed {
+                       label = "96318REF:red:post-failed";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_pwron>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts b/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
new file mode 100644 (file)
index 0000000..d1085e7
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend AR-5315u";
+       compatible = "comtrend,ar-5315u", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 3 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wps_green {
+                       label = "AR-5315u:green:wps";
+                       gpios = <&pinctrl 0 1>;
+               };
+               power_green {
+                       label = "AR-5315u:green:power";
+                       gpios = <&pinctrl 1 1>;
+                       default-state = "on";
+               };
+               usb_green {
+                       label = "AR-5315u:green:usb";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "AR-5315u:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               inet_red {
+                       label = "AR-5315u:red:inet";
+                       gpios = <&pinctrl 9 1>;
+               };
+               dsl_green {
+                       label = "AR-5315u:green:dsl";
+                       gpios = <&pinctrl 10 1>;
+               };
+               power_red {
+                       label = "AR-5315u:red:power";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0xfe0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts b/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts
new file mode 100644 (file)
index 0000000..cf5b296
--- /dev/null
@@ -0,0 +1,133 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2750B/DSL-2751 rev D1";
+       compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&pinctrl 2 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "dsl-275xb:green:power";
+                       gpios = <&pinctrl 3 1>;
+                       default-state = "on";
+               };
+
+               inet_green {
+                       label = "dsl-275xb:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+
+               inet_red {
+                       label = "dsl-275xb:red:inet-fail";
+                       gpios = <&pinctrl 9 1>;
+               };
+
+               power_red {
+                       label = "dsl-275xb:red:post-failed";
+                       gpios = <&pinctrl 11 1>;
+               };
+
+               wps_blue {
+                       label = "dsl-275xb:blue:wps";
+                       gpios = <&pinctrl 16 1>;
+               };
+
+               dsl_green {
+                       label = "dsl-275xb:green:dsl";
+                       gpios = <&pinctrl 17 1>;
+               };
+
+               usb_green {
+                       /* not user controllable? */
+                       label = "dsl-275xb:green:usb";
+                       gpios = <&pinctrl 49 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+
+       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts b/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts
new file mode 100644 (file)
index 0000000..f09310e
--- /dev/null
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sagem F@st 2704N";
+       compatible = "sagem,fast-2704n", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 1 0>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wps_green {
+                       label = "F@ST2704N:green:wps";
+                       gpios = <&pinctrl 2 1>;
+               };
+               lan1_green {
+                       label = "F@ST2704N:green:lan1";
+                       gpios = <&pinctrl 4 1>;
+               };
+               lan2_green {
+                       label = "F@ST2704N:green:lan2";
+                       gpios = <&pinctrl 5 1>;
+               };
+               lan3_green {
+                       label = "F@ST2704N:green:lan3";
+                       gpios = <&pinctrl 6 1>;
+               };
+               lan4_green {
+                       label = "F@ST2704N:green:lan4";
+                       gpios = <&pinctrl 7 1>;
+               };
+               inet_green {
+                       label = "F@ST2704N:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               inet_red {
+                       label = "F@ST2704N:red:inet";
+                       gpios = <&pinctrl 9 1>;
+               };
+               dsl_green {
+                       label = "F@ST2704N:green:dsl";
+                       gpios = <&pinctrl 10 1>;
+               };
+               power_red {
+                       label = "F@ST2704N:red:power";
+                       gpios = <&pinctrl 11 1>;
+               };
+               power_green {
+                       label = "F@ST2704N:green:power";
+                       gpios = <&pinctrl 47 1>;
+                       default-state = "on";
+               };
+               usb_green {
+                       label = "F@ST2704N:green:usb";
+                       gpios = <&pinctrl 49 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6318.dtsi b/target/linux/bcm63xx/dts/bcm6318.dtsi
new file mode 100644 (file)
index 0000000..a902c1b
--- /dev/null
@@ -0,0 +1,200 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6318";
+
+       aliases {
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               spi1 = &hsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips3300", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       ubus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               ext_intc: interrupt-controller@10000018 {
+                       compatible = "brcm,bcm6318-ext-intc";
+                       reg = <0x10000018 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <24>, <25>, <26>, <27>;
+               };
+
+               periph_intc: interrupt-controller@10000020 {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0x10000020 0x20>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               pinctrl: pin-controller@10000080 {
+                       compatible = "brcm,bcm6318-pinctrl";
+                       reg = <0x10000080 0x08>,
+                             <0x10000088 0x08>,
+                             <0x10000098 0x04>,
+                             <0x1000009c 0x0c>,
+                             <0x100000d4 0x18>;
+                       reg-names = "dirout", "dat", "mode", "mux", "pad";
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-parent = <&ext_intc>;
+                       interrupts = <0 0>, <1 0>;
+                       interrupt-names = "gpio33", "gpio34";
+
+                       pinctrl_ephy0_spd_led: ephy0_spd_led {
+                               function = "ephy0_spd_led";
+                               pins = "gpio0";
+                       };
+
+                       pinctrl_ephy1_spd_led: ephy1_spd_led {
+                               function = "ephy1_spd_led";
+                               pins = "gpio1";
+                       };
+
+                       pinctrl_ephy2_spd_led: ephy2_spd_led {
+                               function = "ephy2_spd_led";
+                               pins = "gpio2";
+                       };
+
+                       pinctrl_ephy3_spd_led: ephy3_spd_led {
+                               function = "ephy3_spd_led";
+                               pins = "gpio3";
+                       };
+
+                       pinctrl_ephy0_act_led: ephy0_act_led {
+                               function = "ephy0_act_led";
+                               pins = "gpio4";
+                       };
+
+                       pinctrl_ephy1_act_led: ephy1_act_led {
+                               function = "ephy1_act_led";
+                               pins = "gpio5";
+                       };
+
+                       pinctrl_ephy2_act_led: ephy2_act_led {
+                               function = "ephy2_act_led";
+                               pins = "gpio6";
+                       };
+
+                       pinctrl_ephy3_act_led: ephy3_act_led {
+                               function = "ephy3_act_led";
+                               pins = "gpio7";
+                       };
+
+                       pinctrl_serial_led: serial_led {
+                               pinctrl_serial_led_data: serial_led_data {
+                                       function = "serial_led_data";
+                                       pins = "gpio6";
+                               };
+
+                               pinctrl_serial_led_clk: serial_led_clk {
+                                       function = "serial_led_clk";
+                                       pins = "gpio7";
+                               };
+                       };
+
+                       pinctrl_inet_act_led: inet_act_led {
+                               function = "inet_act_led";
+                               pins = "gpio8";
+                       };
+
+                       pinctrl_inet_fail_led: inet_fail_led {
+                               function = "inet_fail_led";
+                               pins = "gpio9";
+                       };
+
+                       pinctrl_dsl_led: dsl_led {
+                               function = "dsl_led";
+                               pins = "gpio10";
+                       };
+
+                       pinctrl_post_fail_led: post_fail_led {
+                               function = "post_fail_led";
+                               pins = "gpio11";
+                       };
+
+                       pinctrl_wlan_wps_led: wlan_wps_led {
+                               function = "wlan_wps_led";
+                               pins = "gpio12";
+                       };
+
+                       pinctrl_usb_pwron: usb_pwron {
+                               function = "usb_pwron";
+                               pins = "gpio13";
+                       };
+
+                       pinctrl_usb_device_led: usb_device_led {
+                               function = "usb_device_led";
+                               pins = "gpio13";
+                       };
+
+                       pinctrl_usb_active: usb_active {
+                               function = "usb_active";
+                               pins = "gpio40";
+                       };
+               };
+
+               uart0: serial@10000100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <28>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               leds: led-controller@10000200 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-leds";
+                       reg = <0x10000200 0x24>;
+                       status = "disabled";
+               };
+
+               hsspi: spi@10003000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-hsspi";
+                       reg = <0x10003000 0x600>;
+                       interrupts = <29>;
+                       /* clocks = <&clkctl 25>; */
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts b/target/linux/bcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts
new file mode 100644 (file)
index 0000000..b417688
--- /dev/null
@@ -0,0 +1,59 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM963268BU_P300 reference board";
+       compatible = "brcm,bcm963268bu-p300", "brcm,bcm63268";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 32 0>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 0>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm63268-inteno-vg50.dts b/target/linux/bcm63xx/dts/bcm63268-inteno-vg50.dts
new file mode 100644 (file)
index 0000000..dbbea13
--- /dev/null
@@ -0,0 +1,59 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Inteno VG50";
+       compatible = "inteno,vg50", "brcm,bcm63268";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 32 0>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 34 0>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm63268.dtsi b/target/linux/bcm63xx/dts/bcm63268.dtsi
new file mode 100644 (file)
index 0000000..1b4b3e6
--- /dev/null
@@ -0,0 +1,250 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm63268";
+
+       aliases {
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi0 = &lsspi;
+               spi1 = &hsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       ubus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               ext_intc: interrupt-controller@10000018 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0x10000018 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <44>, <45>, <46>, <47>;
+               };
+
+               periph_intc: interrupt-controller@10000020 {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0x10000020 0x20>,
+                             <0x10000040 0x20>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>, <3>;
+               };
+
+               pinctrl: pin-controller@100000c0 {
+                       compatible = "brcm,bcm63268-pinctrl";
+                       reg = <0x100000c0 0x8>,
+                             <0x100000c8 0x8>,
+                             <0x100000d0 0x4>,
+                             <0x100000d8 0x4>,
+                             <0x100000dc 0x4>,
+                             <0x100000f8 0x4>;
+                       reg-names = "dirout", "dat", "led", "mode",
+                                   "ctrl", "basemode";
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
+                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
+
+                       pinctrl_serial_led: serial_led {
+                               pinctrl_serial_led_clk: serial_led_clk {
+                                       function = "serial_led_clk";
+                                       pins = "gpio0";
+                               };
+
+                               pinctrl_serial_led_data: serial_led_data {
+                                       function = "serial_led_data";
+                                       pins = "gpio1";
+                               };
+                       };
+
+                       pinctrl_hsspi_cs4: hsspi_cs4 {
+                               function = "hsspi_cs4";
+                               pins = "gpio16";
+                       };
+
+                       pinctrl_hsspi_cs5: hsspi_cs5 {
+                               function = "hsspi_cs5";
+                               pins = "gpio17";
+                       };
+
+                       pinctrl_hsspi_cs6: hsspi_cs6 {
+                               function = "hsspi_cs6";
+                               pins = "gpio8";
+                       };
+
+                       pinctrl_hsspi_cs7: hsspi_cs7 {
+                               function = "hsspi_cs7";
+                               pins = "gpio9";
+                       };
+
+                       pinctrl_adsl_spi: adsl_spi {
+                               pinctrl_adsl_spi_miso: adsl_spi_miso {
+                                       function = "adsl_spi_miso";
+                                       pins = "gpio18";
+                               };
+
+                               pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+                                       function = "adsl_spi_mosi";
+                                       pins = "gpio19";
+                               };
+                       };
+
+                       pinctrl_vreq_clk: vreq_clk {
+                               function = "vreq_clk";
+                               pins = "gpio22";
+                       };
+
+                       pinctrl_pcie_clkreq_b: pcie_clkreq_b {
+                               function = "pcie_clkreq_b";
+                               pins = "gpio23";
+                       };
+
+                       pinctrl_robosw_led_clk: robosw_led_clk {
+                               function = "robosw_led_clk";
+                               pins = "gpio30";
+                       };
+
+                       pinctrl_robosw_led_data: robosw_led_data {
+                               function = "robosw_led_data";
+                               pins = "gpio31";
+                       };
+
+                       pinctrl_nand: nand {
+                               function = "nand";
+                               group = "nand_grp";
+                       };
+
+                       pinctrl_gpio35_alt: gpio35_alt {
+                               function = "gpio35_alt";
+                               pin = "gpio35";
+                       };
+
+                       pinctrl_dectpd: dectpd {
+                               function = "dectpd";
+                               group = "dectpd_grp";
+                       };
+
+                       pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
+                               function = "vdsl_phy_override_0";
+                               group = "vdsl_phy_override_0_grp";
+                       };
+
+                       pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
+                               function = "vdsl_phy_override_1";
+                               group = "vdsl_phy_override_1_grp";
+                       };
+
+                       pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
+                               function = "vdsl_phy_override_2";
+                               group = "vdsl_phy_override_2_grp";
+                       };
+
+                       pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
+                               function = "vdsl_phy_override_3";
+                               group = "vdsl_phy_override_3_grp";
+                       };
+
+                       pinctrl_dsl_gpio8: dsl_gpio8 {
+                               function = "dsl_gpio8";
+                               group = "dsl_gpio8";
+                       };
+
+                       pinctrl_dsl_gpio9: dsl_gpio9 {
+                               function = "dsl_gpio9";
+                               group = "dsl_gpio9";
+                       };
+               };
+
+               uart0: serial@10000180 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000180 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <5>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@100001a0 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x100001a0 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <34>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@10000800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-spi";
+                       reg = <0x10000800 0x70c>;
+                       interrupts = <80>;
+                       /* clocks = <&clkctl 15>; */
+               };
+
+               hsspi: spi@10001000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-hsspi";
+                       reg = <0x10001000 0x600>;
+                       interrupts = <6>;
+                       /* clocks = <&clkctl 16>; */
+               };
+
+               leds: led-controller@10001900 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-leds";
+                       reg = <0x10001900 0x24>;
+                       status = "disabled";
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts b/target/linux/bcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts
new file mode 100644 (file)
index 0000000..bcd2286
--- /dev/null
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM963269BHR reference board";
+       compatible = "brcm,bcm963269bhr", "brcm,bcm63269", "brcm,bcm63268";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 32 0>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb1 {
+                       label = "963269BHR:green:usb1";
+                       gpios = <&pinctrl 9 1>;
+               };
+
+               usb2 {
+                       label = "963269BHR:green:usb2";
+                       gpios = <&pinctrl 10 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts
new file mode 100644 (file)
index 0000000..814274b
--- /dev/null
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ADB P.DG A4001N";
+       compatible = "adb,a4001n", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_red {
+                       label = "A4001N:red:inet";
+                       gpios = <&pinctrl 1 0>;
+               };
+               power_red {
+                       label = "A4001N:red:power";
+                       gpios = <&pinctrl 4 0>;
+               };
+               power_green {
+                       label = "A4001N:green:power";
+                       gpios = <&pinctrl 8 0>;
+                       default-state = "on";
+               };
+               usb_green {
+                       label = "A4001N:green:usb";
+                       gpios = <&pinctrl 10 1>;
+               };
+               dsl_green {
+                       label = "A4001N:green:dsl";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts
new file mode 100644 (file)
index 0000000..e58f865
--- /dev/null
@@ -0,0 +1,132 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ADB P.DG A4001N1";
+       compatible = "adb,a4001n1", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wlan";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_red {
+                       label = "A4001N1:red:inet";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "A4001N1:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "A4001N1:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               ppp_red {
+                       label = "A4001N1:red:ppp";
+                       gpios = <&pinctrl 5 1>;
+               };
+               usb_green {
+                       label = "A4001N1:green:3g";
+                       gpios = <&pinctrl 6 1>;
+               };
+               usb_red {
+                       label = "A4001N1:red:3g";
+                       gpios = <&pinctrl 7 1>;
+               };
+               power_red {
+                       label = "A4001N1:red:power";
+                       gpios = <&pinctrl 8 1>;
+               };
+               wlan_green {
+                       label = "A4001N1:green:wlan";
+                       gpios = <&pinctrl 9 1>;
+               };
+               wlan_red {
+                       label = "A4001N1:red:wlan";
+                       gpios = <&pinctrl 10 1>;
+               };
+               inet_green {
+                       label = "A4001N1:green:inet";
+                       gpios = <&pinctrl 11 1>;
+               };
+               eth_red {
+                       label = "A4001N1:red:eth";
+                       gpios = <&pinctrl 20 1>;
+               };
+               eth_green {
+                       label = "A4001N1:green:eth";
+                       gpios = <&pinctrl 31 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0xfe0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts
new file mode 100644 (file)
index 0000000..6fbac7d
--- /dev/null
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom bcm963281TAN reference board";
+       compatible = "brcm,bcm963281tan", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet {
+                       label = "963281TAN::internet";
+                       gpios = <&pinctrl 1 1>;
+               };
+               power {
+                       label = "963281TAN::power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               inet_fail {
+                       label = "963281TAN::internet-fail";
+                       gpios = <&pinctrl 7 1>;
+               };
+               power_fail {
+                       label = "963281TAN::power-fail";
+                       gpios = <&pinctrl 8 1>;
+               };
+               wps {
+                       label = "963281TAN::wps";
+                       gpios = <&pinctrl 9 1>;
+               };
+               dsl {
+                       label = "963281TAN::dsl";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts
new file mode 100644 (file)
index 0000000..a0a6c9e
--- /dev/null
@@ -0,0 +1,73 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96328avng reference board";
+       compatible = "brcm,bcm96328avng", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_fail {
+                       label = "96328avng::internet-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               dsl {
+                       label = "96328avng::dsl";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power {
+                       label = "96328avng::power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_fail {
+                       label = "96328avng::power-fail";
+                       gpios = <&pinctrl 8 1>;
+               };
+               wps {
+                       label = "96328avng::wps";
+                       gpios = <&pinctrl 9 1>;
+               };
+               inet {
+                       label = "96328avng::internet";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_port1_device>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts
new file mode 100644 (file)
index 0000000..e336024
--- /dev/null
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend AR-5381u";
+       compatible = "comtrend,ar-5381u", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               alarm_red {
+                       label = "AR-5381u:red:alarm";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "AR-5381u:green:inet";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "AR-5381u:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0xfe0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts
new file mode 100644 (file)
index 0000000..209eda3
--- /dev/null
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend AR-5387un";
+       compatible = "comtrend,ar-5387un", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_red {
+                       label = "AR-5387un:red:inet";
+                       gpios = <&pinctrl 1 0>;
+               };
+               power_red {
+                       label = "AR-5387un:red:power";
+                       gpios = <&pinctrl 4 0>;
+               };
+               inet_green {
+                       label = "AR-5387un:green:inet";
+                       gpios = <&pinctrl 7 0>;
+               };
+               power_green {
+                       label = "AR-5387un:green:power";
+                       gpios = <&pinctrl 8 0>;
+                       default-state = "on";
+               };
+               dsl_green {
+                       label = "AR-5387un:green:dsl";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0xfe0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts b/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts
new file mode 100644 (file)
index 0000000..f3fab05
--- /dev/null
@@ -0,0 +1,121 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2740B/DSL-2741B rev F1";
+       compatible = "d-link,dsl-274xb-f1", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_red {
+                       label = "dsl-274xb:red:internet";
+                       gpios = <&pinctrl 2 1>;
+               };
+               dsl_green {
+                       label = "dsl-274xb:green:dsl";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "dsl-274xb:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "dsl-274xb:red:power";
+                       gpios = <&pinctrl 8 1>;
+               };
+               wps_blue {
+                       label = "dsl-274xb:blue:wps";
+                       gpios = <&pinctrl 9 1>;
+               };
+               inet_green {
+                       label = "dsl-274xb:green:internet";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7c0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       cal_data@7d0000 {
+                               reg = <0x7d0000 0x010000>;
+                               label = "cal_data";
+                               read-only;
+                       };
+
+                       nvram@7e0000 {
+                               reg = <0x7e0000 0x020000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
new file mode 100644 (file)
index 0000000..5084bd8
--- /dev/null
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "NuCom R5010UN v2";
+       compatible = "nucom,r5010un-v2", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "R5010UNv2:green:inet";
+                       gpios = <&pinctrl 1 1>;
+               };
+               inet_fail_red {
+                       label = "R5010UNv2:red:inet-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               dsl_red {
+                       label = "R5010UNv2:green:dsl";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "R5010UNv2:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_fail_red {
+                       label = "R5010UNv2:red:power-fail";
+                       gpios = <&pinctrl 5 1>;
+               };
+               wps_green {
+                       label = "R5010UNv2:green:wps";
+                       gpios = <&pinctrl 10 1>;
+               };
+               usb_green {
+                       label = "R5010UNv2:green:usb";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts b/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts
new file mode 100644 (file)
index 0000000..d00d8fb
--- /dev/null
@@ -0,0 +1,119 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sagem F@st 2704 V2";
+       compatible = "sagem,fast-2704-v2", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&pinctrl 15 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb_green {
+                       label = "F@ST2704V2:green:usb";
+                       gpios = <&pinctrl 1 1>;
+               };
+               inet_red {
+                       label = "F@ST2704V2:red:inet";
+                       gpios = <&pinctrl 2 1>;
+               };
+               dsl_green {
+                       label = "F@ST2704V2:green:dsl";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "F@ST2704V2:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "F@ST2704V2:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               wps_green {
+                       label = "F@ST2704V2:green:wps";
+                       gpios = <&pinctrl 10 1>;
+               };
+               inet_green {
+                       label = "F@ST2704V2:green:inet";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts b/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts
new file mode 100644 (file)
index 0000000..36899a4
--- /dev/null
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sercomm AD1018 (SPI flash mod)";
+       compatible = "sercomm,ad1018-nor", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&pinctrl 25 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 31 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl_leds: leds {
+               function = "led";
+               pins = "gpio0", "gpio1";
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
+                    &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+       brcm,serial-leds;
+       brcm,serial-shift-inv;
+       brcm,serial-dat-low;
+
+       inet_red@0 {
+               reg = <0>;
+               active-low;
+               label = "AD1018:red:internet";
+       };
+
+       inet_green@1 {
+               reg = <1>;
+               active-low;
+               label = "AD1018:green:internet";
+       };
+
+       power_green@8 {
+               reg = <8>;
+               active-low;
+               label = "AD1018:green:power";
+               default-state = "on";
+       };
+
+       adsl_green@10 {
+               reg = <10>;
+               active-low;
+               label = "AD1018:green:adsl";
+       };
+
+       adsl_red@11 {
+               reg = <11>;
+               active-low;
+               label = "AD1018:red:adsl";
+       };
+
+       phone_green@12 {
+               reg = <12>;
+               active-low;
+               label = "AD1018:green:phone";
+       };
+
+       wps_green@13 {
+               reg = <13>;
+               active-low;
+               label = "AD1018:green:wps";
+       };
+
+       wifi_green@14 {
+               reg = <14>;
+               active-low;
+               label = "AD1018:green:wifi";
+       };
+
+       usb_green@15 {
+               reg = <15>;
+               active-low;
+               label = "AD1018:green:usb";
+       };
+
+       ephy0_spd@17 {
+               reg = <17>;
+               brcm,hardware-controlled;
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6328.dtsi b/target/linux/bcm63xx/dts/bcm6328.dtsi
new file mode 100644 (file)
index 0000000..d08b6ba
--- /dev/null
@@ -0,0 +1,199 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6328";
+
+       aliases {
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi1 = &hsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       ubus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               ext_intc: interrupt-controller@10000018 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0x10000018 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <24>, <25>, <26>, <27>;
+               };
+
+               periph_intc: interrupt-controller@10000020 {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0x10000020 0x10>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               pinctrl: pin-controller@10000080 {
+                       compatible = "brcm,bcm6328-pinctrl";
+                       reg = <0x10000080 0x8>,
+                             <0x10000088 0x8>,
+                             <0x10000098 0x4>,
+                             <0x1000009c 0xc>;
+                       reg-names = "dirout", "dat", "mode", "mux";
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-parent = <&ext_intc>;
+                       interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
+                       interrupt-names = "gpio12", "gpio15",
+                                         "gpio23", "gpio24";
+
+                       pinctrl_serial_led: serial_led {
+                               pinctrl_serial_led_data: serial_led_data {
+                                       function = "serial_led_data";
+                                       pins = "gpio6";
+                               };
+
+                               pinctrl_serial_led_clk: serial_led_clk {
+                                       function = "serial_led_clk";
+                                       pins = "gpio7";
+                               };
+                       };
+
+                       pinctrl_inet_act_led: inet_act_led {
+                               function = "inet_act_led";
+                               pins = "gpio11";
+                       };
+
+                       pinctrl_pcie_clkreq: pcie_clkreq {
+                               function = "pcie_clkreq";
+                               pins = "gpio16";
+                       };
+
+                       pinctrl_ephy0_spd_led: ephy0_spd_led {
+                               function = "led";
+                               pins = "gpio17";
+                       };
+
+                       pinctrl_ephy1_spd_led: ephy1_spd_led {
+                               function = "led";
+                               pins = "gpio18";
+                       };
+
+                       pinctrl_ephy2_spd_led: ephy2_spd_led {
+                               function = "led";
+                               pins = "gpio19";
+                       };
+
+                       pinctrl_ephy3_spd_led: ephy3_spd_led {
+                               function = "led";
+                               pins = "gpio20";
+                       };
+
+                       pinctrl_ephy0_act_led: ephy0_act_led {
+                               function = "ephy0_act_led";
+                               pins = "gpio25";
+                       };
+
+                       pinctrl_ephy1_act_led: ephy1_act_led {
+                               function = "ephy1_act_led";
+                               pins = "gpio26";
+                       };
+
+                       pinctrl_ephy2_act_led: ephy2_act_led {
+                               function = "ephy2_act_led";
+                               pins = "gpio27";
+                       };
+
+                       pinctrl_ephy3_act_led: ephy3_act_led {
+                               function = "ephy3_act_led";
+                               pins = "gpio28";
+                       };
+
+                       pinctrl_hsspi_cs1: hsspi_cs1 {
+                               function = "hsspi_cs1";
+                               pins = "hsspi_cs1";
+                       };
+
+                       pinctrl_usb_port1_device: usb_port1_device {
+                               function = "usb_device_port";
+                               pins = "usb_port1";
+                       };
+
+                       pinctrl_usb_port1_host: usb_port1_host {
+                               function = "usb_host_port";
+                               pins = "usb_port1";
+                       };
+               };
+
+               uart0: serial@10000100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <28>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@10000120 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000120 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <39>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               leds: led-controller@10000800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-leds";
+                       reg = <0x10000800 0x24>;
+                       status = "disabled";
+               };
+
+               hsspi: spi@10001000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-hsspi";
+                       reg = <0x10001000 0x600>;
+                       interrupts = <29>;
+                       /* clocks = <&clkctl 9>; */
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338gw.dts b/target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338gw.dts
new file mode 100644 (file)
index 0000000..92363ec
--- /dev/null
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include "bcm6338.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96338GW reference board";
+       compatible = "brcm,bcm96338gw", "brcm,bcm6338";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96338GW:green:power";
+                       gpios = <&gpio0 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96338GW:green:stop";
+                       gpios = <&gpio0 1 1>;
+               };
+               dsl_green {
+                       label = "96338GW:green:adsl";
+                       gpios = <&gpio0 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96338GW:green:ppp-fail";
+                       gpios = <&gpio0 4 1>;
+               };
+               ses_green {
+                       label = "96338GW:green:ses";
+                       gpios = <&gpio0 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338w.dts b/target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338w.dts
new file mode 100644 (file)
index 0000000..3f6e8c0
--- /dev/null
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include "bcm6338.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96338W reference board";
+       compatible = "brcm,bcm96338w", "brcm,bcm6338";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96338W:green:power";
+                       gpios = <&gpio0 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96338W:green:stop";
+                       gpios = <&gpio0 1 1>;
+               };
+               dsl_green {
+                       label = "96338W:green:adsl";
+                       gpios = <&gpio0 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96338W:green:ppp-fail";
+                       gpios = <&gpio0 4 1>;
+               };
+               ses_green {
+                       label = "96338W:green:ses";
+                       gpios = <&gpio0 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6338-d-link-dsl-2640u.dts b/target/linux/bcm63xx/dts/bcm6338-d-link-dsl-2640u.dts
new file mode 100644 (file)
index 0000000..8cf96a3
--- /dev/null
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+#include "bcm6338.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2640U/BRU/C";
+       compatible = "d-link,dsl-2640u", "brcm,bcm6338";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               green_power {
+                       label = "96338W2_E7T:green:power";
+                       gpios = <&gpio0 0 1>;
+                       default-state = "on";
+               };
+
+               green_stop {
+                       label = "96338W2_E7T:green:ppp";
+                       gpios = <&gpio0 4 1>;
+               };
+
+               green_adsl {
+                       label = "96338W2_E7T:green:ppp-fail";
+                       gpios = <&gpio0 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6338-dynalink-rta1320.dts b/target/linux/bcm63xx/dts/bcm6338-dynalink-rta1320.dts
new file mode 100644 (file)
index 0000000..bac6056
--- /dev/null
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "bcm6338.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Dynalink RTA1320";
+       compatible = "dynalink,rta1320", "brcm,bcm6338";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               green_power {
+                       label = "RTA1320_16M:green:power";
+                       gpios = <&gpio0 0 1>;
+                       default-state = "on";
+               };
+               green_stop {
+                       label = "RTA1320_16M:green:stop";
+                       gpios = <&gpio0 1 1>;
+               };
+               green_adsl {
+                       label = "RTA1320_16M:green:adsl";
+                       gpios = <&gpio0 3 1>;
+               };
+               green_ppp {
+                       label = "RTA1320_16M:green:ppp";
+                       gpios = <&gpio0 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6338.dtsi b/target/linux/bcm63xx/dts/bcm6338.dtsi
new file mode 100644 (file)
index 0000000..3d1c068
--- /dev/null
@@ -0,0 +1,105 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6338";
+
+       aliases {
+               pflash = &pflash;
+               gpio0 = &gpio0;
+               serial0 = &uart0;
+               spi0 = &lsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips3300", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       pflash: nor@1fc00000 {
+               compatible = "cfi-flash";
+               reg = <0x1fc00000 0x400000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               status = "disabled";
+       };
+
+       ubus@fff00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               periph_intc: interrupt-controller@fffe000c {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0xfffe000c 0x8>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               ext_intc: interrupt-controller@fffe0014 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfffe0014 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <3>, <4>, <5>, <6>;
+               };
+
+               gpio0: gpio-controller@fffe0404 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0xfffe0404 4>, <0xfffe040c 4>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ngpios = <8>;
+               };
+
+               uart0: serial@fffe0300 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfffe0300 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@fffe0c00 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6348-spi";
+                       reg = <0xfffe0c00 0x40>;
+                       interrupts = <1>;
+                       /* clocks = <&clkctl 9>; */
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts b/target/linux/bcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts
new file mode 100644 (file)
index 0000000..5aea2dd
--- /dev/null
@@ -0,0 +1,27 @@
+/dts-v1/;
+
+#include "bcm6345.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96345GW2 reference board";
+       compatible = "brcm,bcm96345gw2", "brcm,bcm6345";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts
new file mode 100644 (file)
index 0000000..f678762
--- /dev/null
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "bcm6345.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Siemens Gigaset SE515";
+       compatible = "dynalink,rta770bw", "brcm,bcm6345";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb {
+                       label = "RTA770BW:green:usb";
+                       gpios = <&gpio0 7 1>;
+               };
+
+               adsl {
+                       label = "RTA770BW:green:adsl";
+                       gpios = <&gpio0 8 0>;
+               };
+
+               diag {
+                       label = "RTA770BW:green:diag";
+                       gpios = <&gpio0 10 1>;
+               };
+
+               wlan {
+                       label = "RTA770BW:green:wlan";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts
new file mode 100644 (file)
index 0000000..ad0e7ce
--- /dev/null
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "bcm6345.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Dynalink RTA770W";
+       compatible = "dynalink,rta770w", "brcm,bcm6345";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb {
+                       label = "RTA770W:green:usb";
+                       gpios = <&gpio0 7 1>;
+               };
+
+               adsl {
+                       label = "RTA770W:green:adsl";
+                       gpios = <&gpio0 8 0>;
+               };
+
+               diag {
+                       label = "RTA770W:green:diag";
+                       gpios = <&gpio0 10 1>;
+               };
+
+               wlan {
+                       label = "RTA770W:green:wlan";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6345.dtsi b/target/linux/bcm63xx/dts/bcm6345.dtsi
new file mode 100644 (file)
index 0000000..7d5f79b
--- /dev/null
@@ -0,0 +1,94 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6345";
+
+       aliases {
+               pflash = &pflash;
+               serial0 = &uart0;
+               gpio0 = &gpio0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips32", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       pflash: nor@1fc00000 {
+               compatible = "cfi-flash";
+               reg = <0x1fc00000 0x400000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               status = "disabled";
+       };
+
+       ubus@fff00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+
+               periph_intc: interrupt-controller@fffe000c {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0xfffe000c 0x9>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               ext_intc: interrupt-controller@fffe0014 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfffe0014 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <3>, <4>, <5>, <6>;
+               };
+
+               uart0: serial@fffe0300 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfffe0300 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               gpio0: gpio-controller@fffe0404 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0xfffe0404 4>, <0xfffe0408 4>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ngpios = <16>;
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts b/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts
new file mode 100644 (file)
index 0000000..bf7b4a3
--- /dev/null
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ASMAX AR 1004g";
+       compatible = "asmax,ar-1004g", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "AR1004G:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               inet_green {
+                       label = "AR1004G:green:inet";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_red {
+                       label = "AR1004G:red:power";
+                       gpios = <&pinctrl 6 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ext_mii &pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-belkin-f5d7633.dts b/target/linux/bcm63xx/dts/bcm6348-belkin-f5d7633.dts
new file mode 100644 (file)
index 0000000..c39247d
--- /dev/null
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Belkin F5D7633";
+       compatible = "belkin,f5d7633", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 6 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW-10:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW-10:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW-10:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW-10:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW-10:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0x3c0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3e0000 {
+                       label = "nvram";
+                       reg = <0x3e0000 0x020000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts
new file mode 100644 (file)
index 0000000..014fd3f
--- /dev/null
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96348GW-10 reference board";
+       compatible = "brcm,bcm96348gw-10", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 6 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW-10:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW-10:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW-10:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW-10:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW-10:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts
new file mode 100644 (file)
index 0000000..aeda3c2
--- /dev/null
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96348GW-11 reference board";
+       compatible = "brcm,bcm96348gw-11", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW-11:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW-11:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW-11:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW-11:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW-11:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts
new file mode 100644 (file)
index 0000000..61a0a3d
--- /dev/null
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96348GW reference board";
+       compatible = "brcm,bcm96348gw", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348r.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348r.dts
new file mode 100644 (file)
index 0000000..20c88c4
--- /dev/null
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom 96348R reference board";
+       compatible = "brcm,bcm96348r", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348R:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348R:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348R:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348R:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348R:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts b/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts
new file mode 100644 (file)
index 0000000..1eac7e3
--- /dev/null
@@ -0,0 +1,90 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "BT Voyager 2110";
+       compatible = "bt,voyager-2110", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "V2110:green:power";
+                       gpios = <&pinctrl 0 1>;
+               };
+               power_red {
+                       label = "V2110:red:power";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_green {
+                       label = "V2110:green:adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "V2110:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               wireless_green {
+                       label = "V2110:green:wireless";
+                       gpios = <&pinctrl 6 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts b/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts
new file mode 100644 (file)
index 0000000..0975cff
--- /dev/null
@@ -0,0 +1,90 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "BT Voyager 2500V";
+       compatible = "bt,voyager-2500v-bb", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 31 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "V2500V_BB:green:power";
+                       gpios = <&pinctrl 0 1>;
+               };
+               power_red {
+                       label = "V2500V_BB:red:power";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_green {
+                       label = "V2500V_BB:green:adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "V2500V_BB:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               wireless_green {
+                       label = "V2500V_BB:green:wireless";
+                       gpios = <&pinctrl 6 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-5365.dts b/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-5365.dts
new file mode 100644 (file)
index 0000000..0d36aa2
--- /dev/null
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend CT-5365";
+       compatible = "comtrend,ct-5365", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348A-122:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               alarm_red {
+                       label = "96348A-122:red:alarm";
+                       gpios = <&pinctrl 2 1>;
+               };
+               wps_green {
+                       label = "96348A-122:green:wps";
+                       gpios = <&pinctrl 6 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts b/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts
new file mode 100644 (file)
index 0000000..ead9bc3
--- /dev/null
@@ -0,0 +1,79 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend CT-536+/CT-5621T";
+       compatible = "comtrend,ct-536plus", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "CT536_CT5621:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               adsl_fail_green {
+                       label = "CT536_CT5621:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts b/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts
new file mode 100644 (file)
index 0000000..4213822
--- /dev/null
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2640B rev B2";
+       compatible = "d-link,dsl-2640b-b", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 7 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "D-4P-W:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               status {
+                       label = "D-4P-W::status";
+                       gpios = <&pinctrl 3 1>;
+               };
+               inet_green {
+                       label = "D-4P-W:green:internet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               inet_red {
+                       label = "D-4P-W:red:internet";
+                       gpios = <&pinctrl 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-davolink-dv-201amr.dts b/target/linux/bcm63xx/dts/bcm6348-davolink-dv-201amr.dts
new file mode 100644 (file)
index 0000000..6cafc89
--- /dev/null
@@ -0,0 +1,51 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Davolink DV-201AMR";
+       compatible = "davolink,dv-201amr", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               backup@0 {
+                       label = "backup";
+                       reg = <0x000000 0x400000>;
+               };
+
+               cfe@400000 {
+                       label = "cfe";
+                       reg = <0x400000 0x010000>;
+                       read-only;
+               };
+
+               linux@410000 {
+                       label = "linux";
+                       reg = <0x410000 0x3f0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-dynalink-rta1025w.dts b/target/linux/bcm63xx/dts/bcm6348-dynalink-rta1025w.dts
new file mode 100644 (file)
index 0000000..122e049
--- /dev/null
@@ -0,0 +1,51 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Dynalink RTA1025W";
+       compatible = "dynalink,rta1025w", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts b/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts
new file mode 100644 (file)
index 0000000..6e80675
--- /dev/null
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Inventel Livebox 1";
+       compatible = "inventel,livebox-1", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               button1 {
+                       label = "1";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               button2 {
+                       label = "2";
+                       gpios = <&pinctrl 7 1>;
+                       linux,code = <BTN_2>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               red_adsl_fail {
+                       label = "Livebox1:red:adsl-fail-power";
+                       gpios = <&pinctrl 0 0>;
+                       default-state = "on";
+               };
+
+               red_adsl {
+                       label = "Livebox1:red:adsl";
+                       gpios = <&pinctrl 1 0>;
+               };
+
+               red_traffic {
+                       label = "Livebox1:red:traffic";
+                       gpios = <&pinctrl 2 0>;
+               };
+
+               red_phone {
+                       label = "Livebox1:red:phone";
+                       gpios = <&pinctrl 3 0>;
+               };
+
+               red_wifi {
+                       label = "Livebox1:red:wifi";
+                       gpios = <&pinctrl 4 0>;
+               };
+       };
+};
+
+&pflash {
+       reg = <0x1e400000 0x800000>;
+       status = "ok";
+
+       partitions {
+               compatible = "ecoscentric,redboot-fis-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-netgear-dg834g-v4.dts b/target/linux/bcm63xx/dts/bcm6348-netgear-dg834g-v4.dts
new file mode 100644 (file)
index 0000000..4ea096e
--- /dev/null
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Netgear DG834G v4";
+       compatible = "netgear,dg834g-v4", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 6 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348W3:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               status {
+                       label = "96348W3:red:power";
+                       gpios = <&pinctrl 1 1>;
+               };
+               inet_green {
+                       label = "96348W3::adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_red {
+                       label = "96348W3::internet";
+                       gpios = <&pinctrl 3 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts b/target/linux/bcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts
new file mode 100644 (file)
index 0000000..f7e2032
--- /dev/null
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Netgear DG834GT/PN";
+       compatible = "netgear,dg834gt-pn", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 6 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW-10:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW-10:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW-10:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW-10:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW-10:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-sagem-fast-2404.dts b/target/linux/bcm63xx/dts/bcm6348-sagem-fast-2404.dts
new file mode 100644 (file)
index 0000000..945fcc1
--- /dev/null
@@ -0,0 +1,51 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sagem F@st 2404";
+       compatible = "sagem,fast-2404", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-sagem-fast-2604.dts b/target/linux/bcm63xx/dts/bcm6348-sagem-fast-2604.dts
new file mode 100644 (file)
index 0000000..a2d2717
--- /dev/null
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sagem F@st 2604";
+       compatible = "sagem,fast-2604", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "F@ST2604:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "F@ST2604:red:power";
+                       gpios = <&pinctrl 1 1>;
+               };
+               inet_red {
+                       label = "F@ST2604:red:inet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               wps_green {
+                       label = "F@ST2604:green:wps";
+                       gpios = <&pinctrl 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts b/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts
new file mode 100644 (file)
index 0000000..8b0d1ca
--- /dev/null
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "T-Com Speedport W 500V";
+       compatible = "t-com,speedport-w-500v", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "SPW500V:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "SPW500V:red:power";
+                       gpios = <&pinctrl 1 1>;
+               };
+               ppp_green {
+                       label = "SPW500V:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               pstn_green {
+                       label = "SPW500V:green:pstn";
+                       gpios = <&pinctrl 28 1>;
+               };
+               voip_green {
+                       label = "SPW500V:green:voip";
+                       gpios = <&pinctrl 32 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-tecom-gw6000.dts b/target/linux/bcm63xx/dts/bcm6348-tecom-gw6000.dts
new file mode 100644 (file)
index 0000000..4822b04
--- /dev/null
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "TECOM GW6000";
+       compatible = "tecom,gw6000", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts b/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts
new file mode 100644 (file)
index 0000000..c86cbf9
--- /dev/null
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "TECOM GW6200";
+       compatible = "tecom,gw6200", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               line1_green {
+                       label = "GW6200:green:line1";
+                       gpios = <&pinctrl 4 1>;
+               };
+               line2_green {
+                       label = "GW6200:green:line2";
+                       gpios = <&pinctrl 5 1>;
+               };
+               line3_green {
+                       label = "GW6200:green:line3";
+                       gpios = <&pinctrl 6 1>;
+               };
+               tel_green {
+                       label = "GW6200:green:tel";
+                       gpios = <&pinctrl 7 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-telsey-cpva502plus.dts b/target/linux/bcm63xx/dts/bcm6348-telsey-cpva502plus.dts
new file mode 100644 (file)
index 0000000..71620bc
--- /dev/null
@@ -0,0 +1,79 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Telsey CPVA502+";
+       compatible = "telsey,cpva502plus", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               phone_green {
+                       label = "CPVA502+:green:phone";
+                       gpios = <&pinctrl 0 1>;
+               };
+
+               link_amber {
+                       label = "CPVA502+:amber:link";
+                       gpios = <&pinctrl 5 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-telsey-magic.dts b/target/linux/bcm63xx/dts/bcm6348-telsey-magic.dts
new file mode 100644 (file)
index 0000000..1358ebe
--- /dev/null
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Alice W-Gate";
+       compatible = "telsey,magic", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "MAGIC:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+
+               stop {
+                       label = "MAGIC:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+
+               hpna {
+                       label = "MAGIC:green:hpna";
+                       gpios = <&pinctrl 4 1>;
+               };
+
+               status {
+                       label = "MAGIC:green:adsl";
+                       gpios = <&pinctrl 5 1>;
+               };
+
+               voip {
+                       label = "MAGIC:green:voip";
+                       gpios = <&pinctrl 22 1>;
+               };
+
+               wifi {
+                       label = "MAGIC:green:wifi";
+                       gpios = <&pinctrl 28 0>;
+               };
+
+               usb {
+                       label = "MAGIC:green:usb";
+                       gpios = <&pinctrl 35 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts b/target/linux/bcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts
new file mode 100644 (file)
index 0000000..be111ed
--- /dev/null
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "TP-Link TD-W8900GB";
+       compatible = "tp-link,td-w8900gb", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96348GW-11:green:power";
+                       gpios = <&pinctrl 0 1>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96348GW-11:green:stop";
+                       gpios = <&pinctrl 1 1>;
+               };
+               adsl_fail_green {
+                       label = "96348GW-11:green:adsl-fail";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96348GW-11:green:ppp";
+                       gpios = <&pinctrl 3 1>;
+               };
+               ppp_fail_green {
+                       label = "96348GW-11:green:ppp-fail";
+                       gpios = <&pinctrl 4 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0x3d0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3e0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348-usrobotics-usr9108.dts b/target/linux/bcm63xx/dts/bcm6348-usrobotics-usr9108.dts
new file mode 100644 (file)
index 0000000..366eaf3
--- /dev/null
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "bcm6348.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "USRobotics USR9108";
+       compatible = "usrobotics,usr9108", "brcm,bcm6348";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb {
+                       label = "96348GW-A::usb";
+                       gpios = <&pinctrl 0 1>;
+               };
+               dsl {
+                       label = "96348GW-A::adsl";
+                       gpios = <&pinctrl 3 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6348.dtsi b/target/linux/bcm63xx/dts/bcm6348.dtsi
new file mode 100644 (file)
index 0000000..f3e17be
--- /dev/null
@@ -0,0 +1,153 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6348";
+
+       aliases {
+               pflash = &pflash;
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               spi0 = &lsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips3300", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       pflash: nor@1fc00000 {
+               compatible = "cfi-flash";
+               reg = <0x1fc00000 0x400000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               status = "disabled";
+       };
+
+       ubus@fff00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               periph_intc: interrupt-controller@fffe000c {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0xfffe000c 0x8>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>;
+               };
+
+               ext_intc: interrupt-controller@fffe0014 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfffe0014 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <3>, <4>, <5>, <6>;
+
+                       brcm,field-width = <5>;
+               };
+
+               pinctrl: pin-controller@fffe0400 {
+                       compatible = "brcm,bcm6348-pinctrl";
+                       reg = <0xfffe0400 0x8>,
+                             <0xfffe0408 0x8>,
+                             <0xfffe0418 0x4>;
+                       reg-names = "dirout", "dat", "mode";
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-parent = <&ext_intc>;
+                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
+                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
+
+                       pinctrl_ext_ephy: ext_ephy {
+                               function = "ext_ephy";
+                               groups = "group1", "group4";
+                       };
+
+                       pinctrl_mii_snoop: mii_snoop {
+                               function = "ext_ephy";
+                               groups = "group1", "group4";
+                       };
+
+                       pinctrl_legacy_led: legacy_led {
+                               function = "legacy_led";
+                               groups = "group4";
+                       };
+
+                       pinctrl_mii_pccard: mii_pccard {
+                               function = "mii_pccard";
+                               groups = "group1";
+                       };
+
+                       pinctrl_pci: pci {
+                               function = "pci";
+                               groups = "group2";
+                       };
+
+                       pinctrl_spi_master_uart: spi_master_uart {
+                               function = "spi_master_uart";
+                               groups = "group1";
+                       };
+
+                       pinctrl_ext_mii: ext_mii {
+                               function = "ext_mii";
+                               groups = "group0", "group3";
+                       };
+
+                       pinctrl_utopia: utopia {
+                               function = "utopia";
+                               groups = "group0", "group1", "group3";
+                       };
+               };
+
+               uart0: serial@fffe0300 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfffe0300 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@fffe0c00 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6348-spi";
+                       reg = <0xfffe0c00 0x40>;
+                       interrupts = <1>;
+                       /* clocks = <&clkctl 9>; */
+
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-alcatel-rg100a.dts b/target/linux/bcm63xx/dts/bcm6358-alcatel-rg100a.dts
new file mode 100644 (file)
index 0000000..22f50d5
--- /dev/null
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Alcatel RG100A";
+       compatible = "alcatel,rg100a", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               stop_green {
+                       label = "96358VW2:green:stop";
+                       gpios = <&pinctrl 4 1>;
+               };
+               power_green {
+                       label = "96358VW2:green:power";
+                       gpios = <&pinctrl 5 1>;
+                       default-state = "on";
+               };
+               adsl_green {
+                       label = "96358VW2:green:adsl";
+                       gpios = <&pinctrl 22 1>;
+               };
+               ppp_fail_green {
+                       label = "96358VW2:green:ppp-fail";
+                       gpios = <&pinctrl 23 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw.dts b/target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw.dts
new file mode 100644 (file)
index 0000000..669d194
--- /dev/null
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96358VW reference board";
+       compatible = "brcm,bcm96358vw", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "96358VW:green:power";
+                       gpios = <&pinctrl 4 0>;
+                       default-state = "on";
+               };
+               stop_green {
+                       label = "96358VW:green:stop";
+                       gpios = <&pinctrl 5 0>;
+               };
+               adsl_fail_green {
+                       label = "96358VW:green:adsl-fail";
+                       gpios = <&pinctrl 15 1>;
+               };
+               ppp_green {
+                       label = "96358VW:green:ppp";
+                       gpios = <&pinctrl 22 1>;
+               };
+               ppp_fail_green {
+                       label = "96358VW:green:ppp-fail";
+                       gpios = <&pinctrl 23 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts b/target/linux/bcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts
new file mode 100644 (file)
index 0000000..a4a977e
--- /dev/null
@@ -0,0 +1,49 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96358VW2 reference board";
+       compatible = "brcm,bcm96358vw2", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               stop_green {
+                       label = "96358VW2:green:stop";
+                       gpios = <&pinctrl 4 1>;
+               };
+               power_green {
+                       label = "96358VW2:green:power";
+                       gpios = <&pinctrl 5 1>;
+                       default-state = "on";
+               };
+               adsl_green {
+                       label = "96358VW2:green:adsl";
+                       gpios = <&pinctrl 22 1>;
+               };
+               ppp_fail_green {
+                       label = "96358VW2:green:ppp-fail";
+                       gpios = <&pinctrl 23 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts b/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts
new file mode 100644 (file)
index 0000000..351b294
--- /dev/null
@@ -0,0 +1,171 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "BT Home Hub 2.0 Type A";
+       compatible = "bt,home-hub-2-a", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               phone {
+                       label = "phone";
+                       gpios = <&pinctrl 1 1>;
+                       linux,code = <KEY_PHONE>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 9 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 11 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_serial_led>;
+
+       led@0 {
+               reg = <0>;
+               active-low;
+               label = "HOMEHUB2A:red:power";
+       };
+
+       led@1 {
+               reg = <0>;
+               active-low;
+               label = "HOMEHUB2A:green:power";
+               default-state = "on";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "HOMEHUB2A:blue:power";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "HOMEHUB2A:red:broadband";
+       };
+
+       led@4 {
+               reg = <4>;
+               active-low;
+               label = "HOMEHUB2A:green:broadband";
+       };
+
+       led@5 {
+               reg = <5>;
+               active-low;
+               label = "HOMEHUB2A:blue:broadband";
+       };
+
+       led@6 {
+               reg = <6>;
+               active-low;
+               label = "HOMEHUB2A:red:wireless";
+       };
+
+       led@7 {
+               reg = <7>;
+               active-low;
+               label = "HOMEHUB2A:green:wireless";
+       };
+
+       led@8 {
+               reg = <8>;
+               active-low;
+               label = "HOMEHUB2A:blue:wireless";
+       };
+
+       led@9 {
+               reg = <9>;
+               active-low;
+               label = "HOMEHUB2A:red:phone";
+       };
+
+       led@10 {
+               reg = <10>;
+               active-low;
+               label = "HOMEHUB2A:green:phone";
+       };
+
+       led@11 {
+               reg = <11>;
+               active-low;
+               label = "HOMEHUB2A:blue:phone";
+       };
+
+       led@12 {
+               reg = <12>;
+               active-low;
+               label = "HOMEHUB2A:red:upgrading";
+       };
+
+       led@13 {
+               reg = <13>;
+               active-low;
+               label = "HOMEHUB2A:green:upgrading";
+       };
+
+       led@14 {
+               reg = <14>;
+               active-low;
+               label = "HOMEHUB2A:blue:upgrading";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-comtrend-ct-6373.dts b/target/linux/bcm63xx/dts/bcm6358-comtrend-ct-6373.dts
new file mode 100644 (file)
index 0000000..c5e38ba
--- /dev/null
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend CT-6373";
+       compatible = "comtrend,ct-6373", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "CT6373-1:green:power";
+                       gpios = <&pinctrl 0 0>;
+                       default-state = "on";
+               };
+               usb_green {
+                       label = "CT6373-1:green:usb";
+                       gpios = <&pinctrl 3 1>;
+               };
+               wlan_green {
+                       label = "CT6373-1:green:wlan";
+                       gpios = <&pinctrl 9 1>;
+               };
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_serial_led>;
+
+       led@0 {
+               reg = <0>;
+               active-low;
+               label = "CT6373-1:green:adsl";
+       };
+
+       led@1 {
+               reg = <1>;
+               active-low;
+               label = "CT6373-1:green:line";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "CT6373-1:green:fxs1";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "CT6373-1:green:fxs2";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-2650u.dts b/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-2650u.dts
new file mode 100644 (file)
index 0000000..c2dad26
--- /dev/null
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2650U";
+       compatible = "d-link,dsl-2650u", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               stop_green {
+                       label = "96358VW2:green:stop";
+                       gpios = <&pinctrl 4 1>;
+               };
+               power_green {
+                       label = "96358VW2:green:power";
+                       gpios = <&pinctrl 5 1>;
+                       default-state = "on";
+               };
+               adsl_green {
+                       label = "96358VW2:green:adsl";
+                       gpios = <&pinctrl 22 1>;
+               };
+               ppp_fail_green {
+                       label = "96358VW2:green:ppp-fail";
+                       gpios = <&pinctrl 23 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts b/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts
new file mode 100644 (file)
index 0000000..6897378
--- /dev/null
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DSL-2740B/DSL-2741B rev C2/3";
+       compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "dsl-274xb:green:internet";
+                       gpios = <&pinctrl 2 0>;
+               };
+               power_red {
+                       label = "dsl-274xb:red:power";
+                       gpios = <&pinctrl 4 1>;
+               };
+               power_green {
+                       label = "dsl-274xb:green:power";
+                       gpios = <&pinctrl 5 1>;
+                       default-state = "on";
+               };
+               dsl_green {
+                       label = "dsl-274xb:green:adsl";
+                       gpios = <&pinctrl 9 1>;
+               };
+               inet_red {
+                       label = "dsl-274xb:red:internet";
+                       gpios = <&pinctrl 10 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts b/target/linux/bcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts
new file mode 100644 (file)
index 0000000..fcf112a
--- /dev/null
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "D-Link DVA-G3810BN/TL";
+       compatible = "d-link,dva-g3810bn-tl", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               voip {
+                       label = "DVAG3810BN::voip";
+                       gpios = <&pinctrl 1 0>;
+               };
+               power {
+                       label = "DVAG3810BN::power";
+                       gpios = <&pinctrl 4 0>;
+                       default-state = "on";
+               };
+               stop {
+                       label = "DVAG3810BN::stop";
+                       gpios = <&pinctrl 5 0>;
+               };
+               dsl {
+                       label = "DVAG3810BN::dsl";
+                       gpios = <&pinctrl 22 1>;
+               };
+               inet {
+                       label = "DVAG3810BN::internet";
+                       gpios = <&pinctrl 23 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts
new file mode 100644 (file)
index 0000000..d230668
--- /dev/null
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG553";
+       compatible = "huawei,echolife-hg553", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&pinctrl 9 1>;
+                       linux,code = <KEY_RFKILL>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "HW553:blue:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "HW553:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               hspa_red {
+                       label = "HW553:red:hspa";
+                       gpios = <&pinctrl 12 1>;
+               };
+               hspa_blue {
+                       label = "HW553:blue:hspa";
+                       gpios = <&pinctrl 13 1>;
+               };
+               lan_red {
+                       label = "HW553:red:lan";
+                       gpios = <&pinctrl 22 1>;
+               };
+               lan_blue {
+                       label = "HW553:blue:lan";
+                       gpios = <&pinctrl 23 1>;
+               };
+               wifi_red {
+                       label = "HW553:red:wifi";
+                       gpios = <&pinctrl 25 1>;
+               };
+               dsl_red {
+                       label = "HW553:red:adsl";
+                       gpios = <&pinctrl 34 1>;
+               };
+               dsl_blue {
+                       label = "HW553:blue:adsl";
+                       gpios = <&pinctrl 35 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts
new file mode 100644 (file)
index 0000000..1827e8e
--- /dev/null
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG556a (version A)";
+       compatible = "huawei,echolife-hg556a-a", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               help {
+                       label = "help";
+                       gpios = <&pinctrl 8 1>;
+                       linux,code = <KEY_HELP>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 9 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               restart {
+                       label = "restart";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 11 1>;
+                       linux,code = <KEY_CONFIG>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               message_red {
+                       label = "HW556:red:message";
+                       gpios = <&pinctrl 0 1>;
+               };
+               hspa_red {
+                       label = "HW556:red:hspa";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_red {
+                       label = "HW556:red:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               power_red {
+                       label = "HW556:red:power";
+                       gpios = <&pinctrl 3 1>;
+                       default-state = "on";
+               };
+               all_red {
+                       label = "HW556:red:all";
+                       gpios = <&pinctrl 6 1>;
+                       default-state = "on";
+               };
+               lan1_green {
+                       label = "HW556:green:lan1";
+                       gpios = <&pinctrl 12 1>;
+               };
+               lan1_red {
+                       label = "HW556:red:lan1";
+                       gpios = <&pinctrl 13 1>;
+               };
+               lan2_green {
+                       label = "HW556:green:lan2";
+                       gpios = <&pinctrl 15 1>;
+               };
+               lan2_red {
+                       label = "HW556:red:lan2";
+                       gpios = <&pinctrl 22 1>;
+               };
+               lan3_green {
+                       label = "HW556:green:lan3";
+                       gpios = <&pinctrl 23 1>;
+               };
+               lan3_red {
+                       label = "HW556:red:lan3";
+                       gpios = <&pinctrl 26 1>;
+               };
+               lan4_green {
+                       label = "HW556:green:lan4";
+                       gpios = <&pinctrl 27 1>;
+               };
+               lan4_red {
+                       label = "HW556:red:lan4";
+                       gpios = <&pinctrl 28 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xec0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               cal_data@ee0000 {
+                       label = "cal_data";
+                       reg = <0xee0000 0x100000>;
+                       read-only;
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts
new file mode 100644 (file)
index 0000000..fa804be
--- /dev/null
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG556a (version B)";
+       compatible = "huawei,echolife-hg556a-b", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               help {
+                       label = "help";
+                       gpios = <&pinctrl 8 1>;
+                       linux,code = <KEY_HELP>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 9 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               restart {
+                       label = "restart";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 11 1>;
+                       linux,code = <KEY_CONFIG>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               message_red {
+                       label = "HW556:red:message";
+                       gpios = <&pinctrl 0 1>;
+               };
+               hspa_red {
+                       label = "HW556:red:hspa";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_red {
+                       label = "HW556:red:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               power_red {
+                       label = "HW556:red:power";
+                       gpios = <&pinctrl 3 1>;
+                       default-state = "on";
+               };
+               all_red {
+                       label = "HW556:red:all";
+                       gpios = <&pinctrl 6 1>;
+                       default-state = "on";
+               };
+               lan1_green {
+                       label = "HW556:green:lan1";
+                       gpios = <&pinctrl 12 1>;
+               };
+               lan1_red {
+                       label = "HW556:red:lan1";
+                       gpios = <&pinctrl 13 1>;
+               };
+               lan2_green {
+                       label = "HW556:green:lan2";
+                       gpios = <&pinctrl 15 1>;
+               };
+               lan2_red {
+                       label = "HW556:red:lan2";
+                       gpios = <&pinctrl 22 1>;
+               };
+               lan3_green {
+                       label = "HW556:green:lan3";
+                       gpios = <&pinctrl 23 1>;
+               };
+               lan3_red {
+                       label = "HW556:red:lan3";
+                       gpios = <&pinctrl 26 1>;
+               };
+               lan4_green {
+                       label = "HW556:green:lan4";
+                       gpios = <&pinctrl 27 1>;
+               };
+               lan4_red {
+                       label = "HW556:red:lan4";
+                       gpios = <&pinctrl 28 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xec0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               cal_data@ee0000 {
+                       label = "cal_data";
+                       reg = <0xee0000 0x100000>;
+                       read-only;
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts
new file mode 100644 (file)
index 0000000..5ed847b
--- /dev/null
@@ -0,0 +1,141 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG556a (version C)";
+       compatible = "huawei,echolife-hg556a-c", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               help {
+                       label = "help";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_HELP>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 9 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               restart {
+                       label = "restart";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 11 1>;
+                       linux,code = <KEY_CONFIG>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan1_green {
+                       label = "HW556:green:lan1";
+                       gpios = <&pinctrl 0 1>;
+               };
+               lan2_green {
+                       label = "HW556:green:lan2";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_red {
+                       label = "HW556:red:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               power_red {
+                       label = "HW556:red:power";
+                       gpios = <&pinctrl 3 1>;
+                       default-state = "on";
+               };
+               message_red {
+                       label = "HW556:red:message";
+                       gpios = <&pinctrl 12 1>;
+               };
+               lan1_red {
+                       label = "HW556:red:lan1";
+                       gpios = <&pinctrl 13 1>;
+               };
+               hspa_red {
+                       label = "HW556:red:hspa";
+                       gpios = <&pinctrl 15 1>;
+               };
+               lan2_red {
+                       label = "HW556:red:lan2";
+                       gpios = <&pinctrl 22 1>;
+               };
+               lan3_green {
+                       label = "HW556:green:lan3";
+                       gpios = <&pinctrl 23 1>;
+               };
+               lan3_red {
+                       label = "HW556:red:lan3";
+                       gpios = <&pinctrl 26 1>;
+               };
+               lan4_green {
+                       label = "HW556:green:lan4";
+                       gpios = <&pinctrl 27 1>;
+               };
+               lan4_red {
+                       label = "HW556:red:lan4";
+                       gpios = <&pinctrl 28 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xec0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               cal_data@ee0000 {
+                       label = "cal_data";
+                       reg = <0xee0000 0x100000>;
+                       read-only;
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-pirelli-a226g.dts b/target/linux/bcm63xx/dts/bcm6358-pirelli-a226g.dts
new file mode 100644 (file)
index 0000000..44e297c
--- /dev/null
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Pirelli A226G";
+       compatible = "pirelli,a226g", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               voip_red {
+                       label = "DWV-S0:red:VoIP";
+                       gpios = <&pinctrl 0 1>;
+               };
+               eth_red {
+                       label = "DWV-S0:red:ethernet";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_green {
+                       label = "DWV-S0:green:ADSL";
+                       gpios = <&pinctrl 2 1>;
+               };
+               usb_green {
+                       label = "DWV-S0:green:USB";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "DWV-S0:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "DWV-S0:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               inet_red {
+                       label = "DWV-S0:red:internet";
+                       gpios = <&pinctrl 6 1>;
+               };
+               inet_green {
+                       label = "DWV-S0:green:internet";
+                       gpios = <&pinctrl 7 1>;
+               };
+               eth_green {
+                       label = "DWV-S0:green:ethernet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               voip_green {
+                       label = "DWV-S0:green:VoIP";
+                       gpios = <&pinctrl 9 1>;
+               };
+               wifi_red {
+                       label = "DWV-S0:red:wifi";
+                       gpios = <&pinctrl 10 1>;
+               };
+               usb_red {
+                       label = "DWV-S0:red:USB";
+                       gpios = <&pinctrl 11 1>;
+               };
+               dsl_red {
+                       label = "DWV-S0:red:ADSL";
+                       gpios = <&pinctrl 12 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts b/target/linux/bcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts
new file mode 100644 (file)
index 0000000..bb1cd29
--- /dev/null
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Pirelli A226M-FWB";
+       compatible = "pirelli,a226m-fwb", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               voip_red {
+                       label = "DWV-S0:red:VoIP";
+                       gpios = <&pinctrl 0 1>;
+               };
+               eth_red {
+                       label = "DWV-S0:red:ethernet";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_green {
+                       label = "DWV-S0:green:ADSL";
+                       gpios = <&pinctrl 2 1>;
+               };
+               usb_green {
+                       label = "DWV-S0:green:USB";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "DWV-S0:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "DWV-S0:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               inet_red {
+                       label = "DWV-S0:red:internet";
+                       gpios = <&pinctrl 6 1>;
+               };
+               inet_green {
+                       label = "DWV-S0:green:internet";
+                       gpios = <&pinctrl 7 1>;
+               };
+               eth_green {
+                       label = "DWV-S0:green:ethernet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               voip_green {
+                       label = "DWV-S0:green:VoIP";
+                       gpios = <&pinctrl 9 1>;
+               };
+               wifi_red {
+                       label = "DWV-S0:red:wifi";
+                       gpios = <&pinctrl 10 1>;
+               };
+               usb_red {
+                       label = "DWV-S0:red:USB";
+                       gpios = <&pinctrl 11 1>;
+               };
+               dsl_red {
+                       label = "DWV-S0:red:ADSL";
+                       gpios = <&pinctrl 12 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-pirelli-a226m.dts b/target/linux/bcm63xx/dts/bcm6358-pirelli-a226m.dts
new file mode 100644 (file)
index 0000000..e0a6b07
--- /dev/null
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Pirelli A226M";
+       compatible = "pirelli,a226m", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               voip_red {
+                       label = "DWV-S0:red:VoIP";
+                       gpios = <&pinctrl 0 1>;
+               };
+               eth_red {
+                       label = "DWV-S0:red:ethernet";
+                       gpios = <&pinctrl 1 1>;
+               };
+               dsl_green {
+                       label = "DWV-S0:green:ADSL";
+                       gpios = <&pinctrl 2 1>;
+               };
+               usb_green {
+                       label = "DWV-S0:green:USB";
+                       gpios = <&pinctrl 3 1>;
+               };
+               power_green {
+                       label = "DWV-S0:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "DWV-S0:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               inet_red {
+                       label = "DWV-S0:red:internet";
+                       gpios = <&pinctrl 6 1>;
+               };
+               inet_green {
+                       label = "DWV-S0:green:internet";
+                       gpios = <&pinctrl 7 1>;
+               };
+               eth_green {
+                       label = "DWV-S0:green:ethernet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               voip_green {
+                       label = "DWV-S0:green:VoIP";
+                       gpios = <&pinctrl 9 1>;
+               };
+               wifi_red {
+                       label = "DWV-S0:red:wifi";
+                       gpios = <&pinctrl 10 1>;
+               };
+               usb_red {
+                       label = "DWV-S0:red:USB";
+                       gpios = <&pinctrl 11 1>;
+               };
+               dsl_red {
+                       label = "DWV-S0:red:ADSL";
+                       gpios = <&pinctrl 12 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-pirelli-agpf-s0.dts b/target/linux/bcm63xx/dts/bcm6358-pirelli-agpf-s0.dts
new file mode 100644 (file)
index 0000000..0b9c397
--- /dev/null
@@ -0,0 +1,129 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Pirelli Alice Gate AGPF-S0";
+       compatible = "pirelli,agpf-s0", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "AGPF-S0:green:power";
+                       gpios = <&pinctrl 4 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "AGPF-S0:red:power";
+                       gpios = <&pinctrl 5 1>;
+               };
+               service_green {
+                       label = "AGPF-S0:green:service";
+                       gpios = <&pinctrl 6 1>;
+               };
+               service_red {
+                       label = "AGPF-S0:red:service";
+                       gpios = <&pinctrl 7 1>;
+               };
+               dsl_green {
+                       label = "AGPF-S0:green:adsl";
+                       gpios = <&pinctrl 9 1>;
+               };
+               dsl_red {
+                       label = "AGPF-S0:red:adsl";
+                       gpios = <&pinctrl 10 1>;
+               };
+               wifi_green {
+                       label = "AGPF-S0:green:wifi";
+                       gpios = <&pinctrl 22 1>;
+               };
+               wifi_red {
+                       label = "AGPF-S0:red:wifi";
+                       gpios = <&pinctrl 23 1>;
+               };
+               inet_red {
+                       label = "AGPF-S0:red:internet";
+                       gpios = <&pinctrl 24 1>;
+               };
+               inet_green {
+                       label = "AGPF-S0:green:internet";
+                       gpios = <&pinctrl 25 1>;
+               };
+               usr1_green {
+                       label = "AGPF-S0:green:usr1";
+                       gpios = <&pinctrl 26 1>;
+               };
+               usr1_red {
+                       label = "AGPF-S0:red:usr1";
+                       gpios = <&pinctrl 27 1>;
+               };
+               usr2_green {
+                       label = "AGPF-S0:green:usr2";
+                       gpios = <&pinctrl 29 1>;
+               };
+               usr2_red {
+                       label = "AGPF-S0:red:usr2";
+                       gpios = <&pinctrl 30 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts b/target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts
new file mode 100644 (file)
index 0000000..de22658
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SFR Neufbox 4 (Foxconn)";
+       compatible = "sfr,neufbox-4-foxconn-r1", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               service {
+                       label = "service";
+                       gpios = <&pinctrl 27 1>;
+                       linux,code = <BTN_0>;
+                       debounce-interval = <60>;
+               };
+
+               clip {
+                       label = "clip";
+                       gpios = <&pinctrl 31 1>;
+                       linux,code = <BTN_1>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               traffic_white {
+                       label = "NB4-FXC-r1:white:traffic";
+                       gpios = <&pinctrl 2 0>;
+               };
+               service_blue {
+                       label = "NB4-FXC-r1:blue:service";
+                       gpios = <&pinctrl 4 0>;
+               };
+               wifi_white {
+                       label = "NB4-FXC-r1:white:wifi";
+                       gpios = <&pinctrl 15 0>;
+               };
+               service_red {
+                       label = "NB4-FXC-r1:red:service";
+                       gpios = <&pinctrl 29 0>;
+               };
+               service_green {
+                       label = "NB4-FXC-r1:green:service";
+                       gpios = <&pinctrl 30 0>;
+               };
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_serial_led>;
+
+       led@0 {
+               reg = <0>;
+               active-low;
+               label = "NB4-FXC-r1:white:alarm";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "NB4-FXC-r1:white:tv";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "NB4-FXC-r1:white:tel";
+       };
+
+       led@4 {
+               reg = <4>;
+               active-low;
+               label = "NB4-FXC-r1:white:adsl";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts b/target/linux/bcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts
new file mode 100644 (file)
index 0000000..db6c5f3
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SFR Neufbox 4 (Sercomm)";
+       compatible = "sfr,neufbox-4-sercomm-r0", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               service {
+                       label = "service";
+                       gpios = <&pinctrl 27 1>;
+                       linux,code = <BTN_0>;
+                       debounce-interval = <60>;
+               };
+
+               clip {
+                       label = "clip";
+                       gpios = <&pinctrl 31 1>;
+                       linux,code = <BTN_1>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               traffic_white {
+                       label = "NB4-SER-r0:white:traffic";
+                       gpios = <&pinctrl 2 1>;
+               };
+               service_blue {
+                       label = "NB4-SER-r0:blue:service";
+                       gpios = <&pinctrl 4 1>;
+               };
+               wifi_white {
+                       label = "NB4-SER-r0:white:wifi";
+                       gpios = <&pinctrl 15 1>;
+               };
+               service_red {
+                       label = "NB4-SER-r0:red:service";
+                       gpios = <&pinctrl 29 1>;
+               };
+               service_green {
+                       label = "NB4-SER-r0:green:service";
+                       gpios = <&pinctrl 30 1>;
+               };
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_serial_led>;
+
+       led@0 {
+               reg = <0>;
+               active-low;
+               label = "NB4-SER-r0:white:alarm";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "NB4-SER-r0:white:tv";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "NB4-SER-r0:white:tel";
+       };
+
+       led@4 {
+               reg = <4>;
+               active-low;
+               label = "NB4-SER-r0:white:adsl";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts b/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts
new file mode 100644 (file)
index 0000000..4aed5f0
--- /dev/null
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "T-Com Speedport W 303V";
+       compatible = "t-com,speedport-w-303v", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 11 0>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               ses {
+                       label = "ses";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               ses_green {
+                       label = "spw303v:green:ses";
+                       gpios = <&pinctrl 0 1>;
+               };
+               power_adsl_red {
+                       label = "spw303v:red:power+adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "spw303v:green:ppp";
+                       gpios = <&pinctrl 5 1>;
+               };
+               power_adsl_green {
+                       label = "spw303v:green:power+adsl";
+                       gpios = <&pinctrl 22 1>;
+                       default-state = "on";
+               };
+               voip_green {
+                       label = "spw303v:green:voip";
+                       gpios = <&pinctrl 27 1>;
+               };
+               pots_green {
+                       label = "spw303v:green:pots";
+                       gpios = <&pinctrl 31 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts b/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts
new file mode 100644 (file)
index 0000000..e422912
--- /dev/null
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Telsey CPVA642-type (CPA-ZNTE60T)";
+       compatible = "telsey,cpva642", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 37 0>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               eth_green {
+                       label = "CPVA642:green:ether";
+                       gpios = <&pinctrl 1 1>;
+               };
+               phone2_green {
+                       label = "CPVA642:green:phone2";
+                       gpios = <&pinctrl 2 1>;
+               };
+               usb_green {
+                       label = "CPVA642:green:usb";
+                       gpios = <&pinctrl 3 1>;
+               };
+               phone1_green {
+                       label = "CPVA642:green:phone1";
+                       gpios = <&pinctrl 4 1>;
+               };
+               wifi_red {
+                       label = "CPVA642:red:wifi";
+                       gpios = <&pinctrl 6 1>;
+               };
+               link_red {
+                       label = "CPVA642:red:link";
+                       gpios = <&pinctrl 9 1>;
+               };
+               link_green {
+                       label = "CPVA642:green:link";
+                       gpios = <&pinctrl 10 1>;
+               };
+               power_green {
+                       label = "CPVA642:green:power";
+                       gpios = <&pinctrl 11 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "CPVA642:red:power";
+                       gpios = <&pinctrl 14 1>;
+               };
+               wifi_green {
+                       label = "CPVA642:green:wifi";
+                       gpios = <&pinctrl 28 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6358.dtsi b/target/linux/bcm63xx/dts/bcm6358.dtsi
new file mode 100644 (file)
index 0000000..a78cdef
--- /dev/null
@@ -0,0 +1,203 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6358";
+
+       aliases {
+               pflash = &pflash;
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi0 = &lsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       pflash: nor@1e000000 {
+               compatible = "cfi-flash";
+               reg = <0x1e000000 0x2000000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               status = "disabled";
+       };
+
+       ubus@fff00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               periph_intc: interrupt-controller@fffe000c {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0xfffe000c 0x8>,
+                             <0xfffe0038 0x8>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>, <3>;
+               };
+
+               ext_intc0: interrupt-controller@fffe0014 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfffe0014 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <25>, <26>, <27>, <28>;
+               };
+
+               ext_intc1: interrupt-controller@fffe001c {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0xfffe001c 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <20>, <21>;
+               };
+
+               pinctrl: pin-controller@fffe0080 {
+                       compatible = "brcm,bcm6358-pinctrl";
+                       reg = <0xfffe0080 0x8>,
+                             <0xfffe0088 0x8>;
+                       reg-names = "dirout", "dat", "mode";
+                       brcm,gpiomode = <&gpiomode>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupts-extended = <&ext_intc1 0 0>,
+                                             <&ext_intc1 1 0>,
+                                             <&ext_intc0 0 0>,
+                                             <&ext_intc0 1 0>,
+                                             <&ext_intc0 2 0>,
+                                             <&ext_intc0 3 0>;
+                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
+                                         "gpio36", "gpio37";
+
+                       pinctrl_ebi_cs: ebi_cs {
+                               function = "ebi_cs";
+                               groups = "ebi_cs_grp";
+                       };
+
+                       pinctrl_uart1: uart1 {
+                               function = "uart1";
+                               groups = "uart1_grp";
+                       };
+
+                       pinctrl_serial_led: serial_led {
+                               function = "serial_led";
+                               groups = "serial_led_grp";
+                       };
+
+                       pinctrl_legacy_led: legacy_led {
+                               function = "legacy_led";
+                               groups = "legacy_led_grp";
+                       };
+
+                       pinctrl_led: led {
+                               function = "led";
+                               groups = "led_grp";
+                       };
+
+                       pinctrl_spi_cs_23: spi_cs {
+                               function = "spi_cs";
+                               groups = "spi_cs_grp";
+                       };
+
+                       pinctrl_utopia: utopia {
+                               function = "utopia";
+                               groups = "utopia_grp";
+                       };
+
+                       pinctrl_pwm_syn_clk: pwm_syn_clk {
+                               function = "pwm_syn_clk";
+                               groups = "pwm_syn_clk_grp";
+                       };
+
+                       pinctrl_sys_irq: sys_irq {
+                               function = "sys_irq";
+                               groups = "sys_irq_grp";
+                       };
+               };
+
+               gpiomode: gpiomode@fffe0098 {
+                       compatible = "brcm,bcm6358-gpiomode", "syscon";
+                       reg = <0xfffe0098 0x4>;
+               };
+
+               leds: led-controller@fffe00d0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-leds";
+                       reg = <0xfffe00d0 0x8>;
+                       status = "disabled";
+               };
+
+               uart0: serial@fffe0100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfffe0100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@fffe0120 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0xfffe0120 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <3>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@fffe0800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-spi";
+                       reg = <0xfffe0800 0x70c>;
+                       interrupts = <1>;
+                       /* clocks = <&clkctl 9>; */
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts b/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts
new file mode 100644 (file)
index 0000000..5809b6d
--- /dev/null
@@ -0,0 +1,69 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG520v";
+       compatible = "huawei,echolife-hg520v", "brcm,bcm6359", "brcm,bcm6358";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 37 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "HW520:green:net";
+                       gpios = <&pinctrl 32 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts b/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts
new file mode 100644 (file)
index 0000000..4498272
--- /dev/null
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+#include "bcm6362.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SFR Neufbox 6 (Sercomm)";
+       compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6361", "brcm,bcm6362";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               service {
+                       label = "service";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <BTN_0>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 12 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 25 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       switch {
+               compatible = "realtek,rtl8367";
+               gpio-sda = <&pinctrl 18 0>;
+               gpio-sck = <&pinctrl 20 0>;
+
+               realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0xfe0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@ff0000 {
+                               reg = <0xff0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts b/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts
new file mode 100644 (file)
index 0000000..db8ce73
--- /dev/null
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+#include "bcm6362.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sagem F@st 2504N";
+       compatible = "sagem,fast-2504n", "brcm,bcm6362";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 25 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_orange {
+                       label = "fast2504n:orange:power";
+                       gpios = <&pinctrl 2 1>;
+               };
+               power_green {
+                       label = "fast2504n:green:power";
+                       gpios = <&pinctrl 10 1>;
+                       default-state = "on";
+               };
+               inet_red {
+                       label = "fast2504n:red:internet";
+                       gpios = <&pinctrl 26 1>;
+               };
+               ok_green {
+                       label = "fast2504n:green:ok";
+                       gpios = <&pinctrl 28 1>;
+               };
+               ok_orange {
+                       label = "fast2504n:orange:ok";
+                       gpios = <&pinctrl 29 1>;
+               };
+               wlan_orangee {
+                       label = "fast2504n:orange:wlan";
+                       gpios = <&pinctrl 30 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6362.dtsi b/target/linux/bcm63xx/dts/bcm6362.dtsi
new file mode 100644 (file)
index 0000000..2ff5c52
--- /dev/null
@@ -0,0 +1,294 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6362";
+
+       aliases {
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi0 = &lsspi;
+               spi1 = &hsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       ubus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               ext_intc: interrupt-controller@10000018 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0x10000018 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <40>, <41>, <42>, <43>;
+               };
+
+               periph_intc: interrupt-controller@10000020 {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0x10000020 0x10>,
+                             <0x10000030 0x10>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>, <3>;
+               };
+
+               pinctrl: pin-controller@10000080 {
+                       compatible = "brcm,bcm6362-pinctrl";
+                       reg = <0x10000080 0x8>,
+                             <0x10000088 0x8>,
+                             <0x10000090 0x4>,
+                             <0x10000098 0x4>,
+                             <0x1000009c 0x4>,
+                             <0x100000b8 0x4>;
+                       reg-names = "dirout", "dat", "led",
+                                   "mode", "ctrl", "basemode";
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-parent = <&ext_intc>;
+                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
+                       interrupt-names = "gpio24", "gpio25",
+                                         "gpio26", "gpio27";
+
+                       pinctrl_usb_device_led: usb_device_led {
+                               function = "usb_device_led";
+                               pins = "gpio0";
+                       };
+
+                       pinctrl_sys_irq: sys_irq {
+                               function = "sys_irq";
+                               pins = "gpio1";
+                       };
+
+                       pinctrl_serial_led: serial_led {
+                               pinctrl_serial_led_clk: serial_led_clk {
+                                       function = "serial_led_clk";
+                                       pins = "gpio2";
+                               };
+
+                               pinctrl_serial_led_data: serial_led_data {
+                                       function = "serial_led_data";
+                                       pins = "gpio3";
+                               };
+                       };
+
+                       pinctrl_robosw_led_data: robosw_led_data {
+                               function = "robosw_led_data";
+                               pins = "gpio4";
+                       };
+
+                       pinctrl_robosw_led_clk: robosw_led_clk {
+                               function = "robosw_led_clk";
+                               pins = "gpio5";
+                       };
+
+                       pinctrl_robosw_led0: robosw_led0 {
+                               function = "robosw_led0";
+                               pins = "gpio6";
+                       };
+
+                       pinctrl_robosw_led1: robosw_led1 {
+                               function = "robosw_led1";
+                               pins = "gpio7";
+                       };
+
+                       pinctrl_inet_led: inet_led {
+                               function = "inet_led";
+                               pins = "gpio8";
+                       };
+
+                       pinctrl_spi_cs2: spi_cs2 {
+                               function = "spi_cs2";
+                               pins = "gpio9";
+                       };
+
+                       pinctrl_spi_cs3: spi_cs3 {
+                               function = "spi_cs3";
+                               pins = "gpio10";
+                       };
+
+                       pinctrl_ntr_pulse: ntr_pulse {
+                               function = "ntr_pulse";
+                               pins = "gpio11";
+                       };
+
+                       pinctrl_uart1_scts: uart1_scts {
+                               function = "uart1_scts";
+                               pins = "gpio12";
+                       };
+
+                       pinctrl_uart1_srts: uart1_srts {
+                               function = "uart1_srts";
+                               pins = "gpio13";
+                       };
+
+
+                       pinctrl_uart1: uart1 {
+                               pinctrl_uart1_sdin: uart1_sdin {
+                                       function = "uart1_sdin";
+                                       pins = "gpio14";
+                               };
+
+                               pinctrl_uart1_sdout: uart1_sdout {
+                                       function = "uart1_sdout";
+                                       pins = "gpio15";
+                               };
+                       };
+
+                       pinctrl_adsl_spi: adsl_spi {
+                               pinctrl_adsl_spi_miso: adsl_spi_miso {
+                                       function = "adsl_spi_miso";
+                                       pins = "gpio16";
+                               };
+
+                               pinctrl_adsl_spi_mosi: adsl_spi_mosi {
+                                       function = "adsl_spi_mosi";
+                                       pins = "gpio17";
+                               };
+
+                               pinctrl_adsl_spi_clk: adsl_spi_clk {
+                                       function = "adsl_spi_clk";
+                                       pins = "gpio18";
+                               };
+
+                               pinctrl_adsl_spi_cs: adsl_spi_cs {
+                                       function = "adsl_spi_cs";
+                                       pins = "gpio19";
+                               };
+                       };
+
+                       pinctrl_ephy0_led: ephy0_led {
+                               function = "ephy0_led";
+                               pins = "gpio20";
+                       };
+
+                       pinctrl_ephy1_led: ephy1_led {
+                               function = "ephy1_led";
+                               pins = "gpio21";
+                       };
+
+                       pinctrl_ephy2_led: ephy2_led {
+                               function = "ephy2_led";
+                               pins = "gpio22";
+                       };
+
+                       pinctrl_ephy3_led: ephy3_led {
+                               function = "ephy3_led";
+                               pins = "gpio23";
+                       };
+
+                       pinctrl_ext_irq0: ext_irq0 {
+                               function = "ext_irq0";
+                               pins = "gpio24";
+                       };
+
+                       pinctrl_ext_irq1: ext_irq1 {
+                               function = "ext_irq1";
+                               pins = "gpio25";
+                       };
+
+                       pinctrl_ext_irq2: ext_irq2 {
+                               function = "ext_irq2";
+                               pins = "gpio26";
+                       };
+
+                       pinctrl_ext_irq3: ext_irq3 {
+                               function = "ext_irq3";
+                               pins = "gpio27";
+                       };
+
+                       pinctrl_nand: nand {
+                               function = "nand";
+                               group = "nand_grp";
+                       };
+               };
+
+               uart0: serial@10000100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <3>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@10000120 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000120 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <4>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@10000800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-spi";
+                       reg = <0x10000800 0x70c>;
+                       interrupts = <2>;
+                       /* clocks = <&clkctl 15>; */
+               };
+
+               hsspi: spi@10001000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-hsspi";
+                       reg = <0x10001000 0x600>;
+                       interrupts = <5>;
+                       /* clocks = <&clkctl 16>; */
+               };
+
+               leds: led-controller@10001900 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6328-leds";
+                       reg = <0x10001900 0x24>;
+                       status = "disabled";
+               };
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts b/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts
new file mode 100644 (file)
index 0000000..05198a1
--- /dev/null
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Actiontec R1000H";
+       compatible = "actiontec,r1000h", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "R1000H:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+
+               usb_green {
+                       label = "R1000H:green:usb";
+                       gpios = <&pinctrl 21 1>;
+               };
+
+               power_green {
+                       label = "R1000H:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+
+               wps_green {
+                       label = "R1000H:green:wps";
+                       gpios = <&pinctrl 23 1>;
+               };
+
+               power_red {
+                       label = "R1000H:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+
+               wps_red {
+                       label = "R1000H:red:wps";
+                       gpios = <&pinctrl 30 1>;
+               };
+
+               inet_red {
+                       label = "R1000H:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               CFE@0 {
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       reg = <0x020000 0x1fc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@1fe0000 {
+                       reg = <0x1fe0000 0x20000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
+
+&uart1 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts b/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts
new file mode 100644 (file)
index 0000000..df9dc71
--- /dev/null
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ADB P.DG AV4202N";
+       compatible = "adb,av4202n", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_white {
+                       label = "AV4202N:white:power";
+                       gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "AV4202N:red:power";
+                       gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
+               };
+               wan_white {
+                       label = "AV4202N:white:wan";
+                       gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
+               };
+               wan_red {
+                       label = "AV4202N:red:wan";
+                       gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
+               };
+               phone_white {
+                       label = "AV4202N:white:phone";
+                       gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
+               };
+               phone_red {
+                       label = "AV4202N:red:phone";
+                       gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
+               };
+               wifi {
+                       label = "AV4202N:blue:wifi";
+                       gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xfc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts b/target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts
new file mode 100644 (file)
index 0000000..3df1514
--- /dev/null
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96368MVNgr reference board";
+       compatible = "brcm,bcm96368mvngr", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "96368MVNgr:green:adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_fail_green {
+                       label = "96368MVNgr:green:inet-fail";
+                       gpios = <&pinctrl 3 0>;
+               };
+               inet_green {
+                       label = "96368MVNgr:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "96368MVNgr:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               wps_green {
+                       label = "96368MVNgr:green:wps";
+                       gpios = <&pinctrl 23 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts b/target/linux/bcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts
new file mode 100644 (file)
index 0000000..1004f88
--- /dev/null
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Broadcom BCM96368MVWG reference board";
+       compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "96368MVWG:green:adsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               ppp_green {
+                       label = "96368MVWG:green:ppp";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "96368MVWG:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               wps_green {
+                       label = "96368MVWG:green:wps";
+                       gpios = <&pinctrl 23 1>;
+               };
+               ppp_fail_red {
+                       label = "96368MVWG:red:ppp-fail";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "brcm,bcm963xx-cfe-nor-partitions";
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts
new file mode 100644 (file)
index 0000000..248ec1d
--- /dev/null
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend VR-3025u";
+       compatible = "comtrend,vr-3025u", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "VR-3025u:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "VR-3025u:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "VR-3025u:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "VR-3025u:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               inet_red {
+                       label = "VR-3025u:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x0000000 0x0020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x0020000 0x1fc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@1fe0000 {
+                       label = "nvram";
+                       reg = <0x1fe0000 0x020000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
+                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts
new file mode 100644 (file)
index 0000000..ac1f896
--- /dev/null
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend VR-3025un";
+       compatible = "comtrend,vr-3025un", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "VR-3025un:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "VR-3025un:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "VR-3025un:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "VR-3025un:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               inet_red {
+                       label = "VR-3025un:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
+                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts
new file mode 100644 (file)
index 0000000..8048d13
--- /dev/null
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend VR-3026e";
+       compatible = "comtrend,vr-3026e", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "VR-3026e:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "VR-3026e:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "VR-3026e:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "VR-3026e:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               inet_red {
+                       label = "VR-3026e:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
+                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg622.dts b/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg622.dts
new file mode 100644 (file)
index 0000000..77ecc62
--- /dev/null
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG622";
+       compatible = "huawei,echolife-hg622", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "HG622:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "HG622:green:inet";
+                       gpios = <&pinctrl 5 1>;
+               };
+               usb_green {
+                       label = "HG622:green:usb";
+                       gpios = <&pinctrl 11 1>;
+               };
+               power_green {
+                       label = "HG622:green:power";
+                       gpios = <&pinctrl 22 1>;
+                       default-state = "on";
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0xf80000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               cal_data@fa0000 {
+                       label = "cal_data";
+                       reg = <0xfa0000 0x020000>;
+                       read-only;
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0xfe0000 0x020000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci_gnt0 &pinctrl_pci_req0
+                    &pinctrl_pci_intb &pinctrl_pci_gnt1
+                    &pinctrl_pci_req1>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts b/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts
new file mode 100644 (file)
index 0000000..3f855bf
--- /dev/null
@@ -0,0 +1,121 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Huawei EchoLife HG655b";
+       compatible = "huawei,echolife-hg655b", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 12 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 23 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "HW65x:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               internet_green {
+                       label = "HW65x:green:internet";
+                       gpios = <&pinctrl 5 1>;
+               };
+
+               usb_green {
+                       label = "HW65x:green:usb";
+                       gpios = <&pinctrl 14 1>;
+               };
+               power_green {
+                       label = "HW65x:green:power";
+                       gpios = <&pinctrl 22 1>;
+                       default-state = "on";
+               };
+               voip_green {
+                       label = "HW65x:green:voip";
+                       gpios = <&pinctrl 25 1>;
+               };
+               wps_green {
+                       label = "HW65x:green:wps";
+                       gpios = <&pinctrl 27 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0x770000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               board_data@790000 {
+                       label = "board_data";
+                       reg = <0x790000 0x030000>;
+               };
+
+               cal_data@7c0000 {
+                       label = "cal_data";
+                       reg = <0x7c0000 0x020000>;
+                       read-only;
+               };
+
+               nvram@7d0000 {
+                       label = "nvram";
+                       reg = <0x7e0000 0x020000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
+                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts b/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts
new file mode 100644 (file)
index 0000000..0354d8e
--- /dev/null
@@ -0,0 +1,185 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Netgear DGND3700v1/DGND3800B";
+       compatible = "netgear,dgnd3700-v1", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 10 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 12 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_green {
+                       label = "DGND3700v1_3800B:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_red {
+                       label = "DGND3700v1_3800B:red:inet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               inet_green {
+                       label = "DGND3700v1_3800B:green:inet";
+                       gpios = <&pinctrl 5 1>;
+               };
+               wps_green {
+                       label = "DGND3700v1_3800B:green:wps";
+                       gpios = <&pinctrl 11 1>;
+               };
+               usbfront_green {
+                       label = "DGND3700v1_3800B:green:usb-front";
+                       gpios = <&pinctrl 13 1>;
+               };
+               usbback_green {
+                       label = "DGND3700v1_3800B:green:usb-back";
+                       gpios = <&pinctrl 14 1>;
+               };
+               power_red {
+                       label = "DGND3700v1_3800B:red:power";
+                       gpios = <&pinctrl 22 1>;
+               };
+               lan_green {
+                       label = "DGND3700v1_3800B:green:lan";
+                       gpios = <&pinctrl 23 1>;
+               };
+               power_green {
+                       label = "DGND3700v1_3800B:green:power";
+                       gpios = <&pinctrl 24 1>;
+                       default-state = "on";
+               };
+               wifi2g_green {
+                       label = "DGND3700v1_3800B:green:wifi2g";
+                       gpios = <&pinctrl 26 1>;
+               };
+               wifi5g_blue {
+                       label = "DGND3700v1_3800B:blue:wifi5g";
+                       gpios = <&pinctrl 27 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x020000 0x1e20000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               board_data@1e40000 {
+                       label = "board_data";
+                       reg = <0x1e40000 0x1a0000>;
+                       read-only;
+               };
+
+               nvram@1fe0000 {
+                       label = "nvram";
+                       reg = <0x1fe0000 0x20000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&lsspi {
+       switch@1 {
+               compatible = "brcm,bcm53115";
+               reg = <1>;
+               spi-max-frequency = <781000>;
+
+               lede,alias = "eth0";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       wan@0 {
+                               reg = <0>;
+                               label = "wan";
+                       };
+
+                       lan@1 {
+                               reg = <1>;
+                               label = "lan1";
+                       };
+
+                       lan@2 {
+                               reg = <2>;
+                               label = "lan2";
+                       };
+
+                       lan@3 {
+                               reg = <3>;
+                               label = "lan3";
+                       };
+
+                       lan@4 {
+                               reg = <4>;
+                               label = "lan4";
+                       };
+
+                       cpu@8 {
+                               reg = <8>;
+                               label = "cpu";
+
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                               };
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts b/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts
new file mode 100644 (file)
index 0000000..48f35b1
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Observa VH4032N";
+       compatible = "observa,vh4032n", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               dsl_blue {
+                       label = "VH4032N:blue:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               dsl_red {
+                       label = "VH4032N:red:dsl";
+                       gpios = <&pinctrl 5 1>;
+               };
+               hspa_blue {
+                       label = "VH4032N:blue:hspa";
+                       gpios = <&pinctrl 11 1>;
+               };
+               hspa_red {
+                       label = "VH4032N:red:hspa";
+                       gpios = <&pinctrl 12 1>;
+               };
+               power_blue {
+                       label = "VH4032N:blue:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "VH4032N:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               voice_blue {
+                       label = "VH4032N:blue:voice";
+                       gpios = <&pinctrl 25 1>;
+               };
+               voice_red {
+                       label = "VH4032N:red:voice";
+                       gpios = <&pinctrl 26 1>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
+                   &pinctrl_ephy2_led &pinctrl_ephy3_led>;
+
+       usb_hub_reset {
+               gpio-hog;
+               gpios = <27 0>;
+               output-high;
+               line-name = "usb-hub-reset-gpio";
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x0000000 0x0020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x0020000 0x1fc0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@1fe0000 {
+                       label = "nvram";
+                       reg = <0x1fe0000 0x020000>;
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts b/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts
new file mode 100644 (file)
index 0000000..c123832
--- /dev/null
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Zyxel P870HW-51a v2";
+       compatible = "zyxel,p870hw-51a-v2", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 36 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_green {
+                       label = "P870HW-51a:green:power";
+                       gpios = <&pinctrl 0 0>;
+                       default-state = "on";
+               };
+               dsl_green {
+                       label = "P870HW-51a:green:dsl";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "P870HW-51a:green:inet";
+                       gpios = <&pinctrl 22 1>;
+               };
+               wps_orange {
+                       label = "P870HW-51a:orange:wps";
+                       gpios = <&pinctrl 24 1>;
+               };
+               inet_red {
+                       label = "P870HW-51a:red:inet";
+                       gpios = <&pinctrl 33 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x3e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@3f0000 {
+                       label = "nvram";
+                       reg = <0x3f0000 0x010000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6368.dtsi b/target/linux/bcm63xx/dts/bcm6368.dtsi
new file mode 100644 (file)
index 0000000..b834f9e
--- /dev/null
@@ -0,0 +1,319 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "brcm,bcm6368";
+
+       aliases {
+               pflash = &pflash;
+               pinctrl = &pinctrl;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               spi0 = &lsspi;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "brcm,bmips4350", "mips,mips4Kc";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       cpu_intc: interrupt-controller {
+               #address-cells = <0>;
+               compatible = "mti,cpu-interrupt-controller";
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+
+       memory { device_type = "memory"; reg = <0 0>; };
+
+       ubus@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+               interrupt-parent = <&periph_intc>;
+
+               ext_intc0: interrupt-controller@10000018 {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0x10000018 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <20>, <21>, <22>, <23>;
+               };
+
+               ext_intc1: interrupt-controller@1000001c {
+                       compatible = "brcm,bcm6345-ext-intc";
+                       reg = <0x1000001c 0x4>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+
+                       interrupts = <24>, <25>;
+               };
+
+               periph_intc: interrupt-controller@10000020 {
+                       compatible = "brcm,bcm6345-l1-intc";
+                       reg = <0x10000020 0x10>,
+                             <0x10000030 0x10>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpu_intc>;
+                       interrupts = <2>, <3>;
+               };
+
+               pinctrl: pin-controller@10000080 {
+                       compatible = "brcm,bcm6368-pinctrl";
+                       reg = <0x10000080 0x8>,
+                             <0x10000088 0x8>,
+                             <0x10000098 0x4>;
+                       reg-names = "dirout", "dat", "mode";
+                       brcm,gpiobasemode = <&gpiobasemode>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupts-extended = <&ext_intc1 0 0>,
+                                             <&ext_intc1 1 0>,
+                                             <&ext_intc0 0 0>,
+                                             <&ext_intc0 1 0>,
+                                             <&ext_intc0 2 0>,
+                                             <&ext_intc0 3 0>;
+                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
+                                         "gpio36", "gpio37";
+
+                       pinctrl_analog_afe_0: analog_afe_0 {
+                               function = "analog_afe_0";
+                               pins = "gpio0";
+                       };
+
+                       pinctrl_analog_afe_1: analog_afe_1 {
+                               function = "analog_afe_1";
+                               pins = "gpio1";
+                       };
+
+                       pinctrl_sys_irq: sys_irq {
+                               function = "sys_irq";
+                               pins = "gpio2";
+                       };
+
+                       pinctrl_serial_led: serial_led {
+                               pinctrl_serial_led_data: serial_led_data {
+                                       function = "serial_led_data";
+                                       pins = "gpio3";
+                               };
+
+                               pinctrl_serial_led_clk: serial_led_clk {
+                                       function = "serial_led_clk";
+                                       pins = "gpio4";
+                               };
+                       };
+
+                       pinctrl_inet_led: inet_led {
+                               function = "inet_led";
+                               pins = "gpio5";
+                       };
+
+                       pinctrl_ephy0_led: ephy0_led {
+                               function = "ephy0_led";
+                               pins = "gpio6";
+                       };
+
+                       pinctrl_ephy1_led: ephy1_led {
+                               function = "ephy1_led";
+                               pins = "gpio7";
+                       };
+
+                       pinctrl_ephy2_led: ephy2_led {
+                               function = "ephy2_led";
+                               pins = "gpio8";
+                       };
+
+                       pinctrl_ephy3_led: ephy3_led {
+                               function = "ephy3_led";
+                               pins = "gpio9";
+                       };
+
+                       pinctrl_robosw_led_data: robosw_led_data {
+                               function = "robosw_led_data";
+                               pins = "gpio10";
+                       };
+
+                       pinctrl_robosw_led_clk: robosw_led_clk {
+                               function = "robosw_led_clk";
+                               pins = "gpio11";
+                       };
+
+                       pinctrl_robosw_led0: robosw_led0 {
+                               function = "robosw_led0";
+                               pins = "gpio12";
+                       };
+
+                       pinctrl_robosw_led1: robosw_led1 {
+                               function = "robosw_led1";
+                               pins = "gpio13";
+                       };
+
+                       pinctrl_usb_device_led: usb_device_led {
+                               function = "usb_device_led";
+                               pins = "gpio14";
+                       };
+
+                       pinctrl_pci: pci {
+                               pinctrl_pci_req1: pci_req1 {
+                                       function = "pci_req1";
+                                       pins = "gpio16";
+                               };
+
+                               pinctrl_pci_gnt1: pci_gnt1 {
+                                       function = "pci_gnt1";
+                                       pins = "gpio17";
+                               };
+
+                               pinctrl_pci_intb: pci_intb {
+                                       function = "pci_intb";
+                                       pins = "gpio18";
+                               };
+
+                               pinctrl_pci_req0: pci_req0 {
+                                       function = "pci_req0";
+                                       pins = "gpio19";
+                               };
+
+                               pinctrl_pci_gnt0: pci_gnt0 {
+                                       function = "pci_gnt0";
+                                       pins = "gpio20";
+                               };
+                       };
+
+                       pinctrl_pcmcia: pcmcia {
+                               pinctrl_pcmcia_cd1: pcmcia_cd1 {
+                                       function = "pcmcia_cd1";
+                                       pins = "gpio22";
+                               };
+
+                               pinctrl_pcmcia_cd2: pcmcia_cd2 {
+                                       function = "pcmcia_cd2";
+                                       pins = "gpio23";
+                               };
+
+                               pinctrl_pcmcia_vs1: pcmcia_vs1 {
+                                       function = "pcmcia_vs1";
+                                       pins = "gpio24";
+                               };
+
+                               pinctrl_pcmcia_vs2: pcmcia_vs2 {
+                                       function = "pcmcia_vs2";
+                                       pins = "gpio25";
+                               };
+                       };
+
+                       pinctrl_ebi_cs2: ebi_cs2 {
+                               function = "ebi_cs2";
+                               pins = "gpio26";
+                       };
+
+                       pinctrl_ebi_cs3: ebi_cs3 {
+                               function = "ebi_cs2";
+                               pins = "gpio27";
+                       };
+
+                       pinctrl_spi_cs2: spi_cs2 {
+                               function = "spi_cs2";
+                               pins = "gpio28";
+                       };
+
+                       pinctrl_spi_cs3: spi_cs3 {
+                               function = "spi_cs3";
+                               pins = "gpio29";
+                       };
+
+                       pinctrl_spi_cs4: spi_cs4 {
+                               function = "spi_cs4";
+                               pins = "gpio30";
+                       };
+
+                       pinctrl_spi_cs5: spi_cs5 {
+                               function = "spi_cs5";
+                               pins = "gpio31";
+                       };
+
+                       pinctrl_uart1: uart1 {
+                               function = "uart1";
+                               group = "uart1_grp";
+                       };
+               };
+
+               gpiobasemode: gpiobasemode@100000b8 {
+                       compatible = "brcm,bcm6368-gpiobasemode", "syscon";
+                       reg = <0x100000b8 0x4>;
+               };
+
+               leds: led-controller@100000d0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-leds";
+                       reg = <0x100000d0 0x8>;
+                       status = "disabled";
+               };
+
+               uart0: serial@10000100 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000100 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <2>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               uart1: serial@10000120 {
+                       compatible = "brcm,bcm6345-uart";
+                       reg = <0x10000120 0x18>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <3>;
+
+                       /* clocks = <&periph_clk>; */
+                       /* clock-names = "refclk"; */
+
+                       status = "disabled";
+               };
+
+               lsspi: spi@10000800 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,bcm6358-spi";
+                       reg = <0x10000800 0x70c>;
+                       interrupts = <1>;
+                       /* clocks = <&clkctl 9>; */
+               };
+       };
+
+       pflash: nor@18000000 {
+               compatible = "cfi-flash";
+               reg = <0x18000000 0x2000000>;
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               status = "disabled";
+       };
+};
diff --git a/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts b/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts
new file mode 100644 (file)
index 0000000..c6db272
--- /dev/null
@@ -0,0 +1,157 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend WAP-5813n";
+       compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 32 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "WAP-5813n:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "WAP-5813n:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               wps_green {
+                       label = "WAP-5813n:green:wps";
+                       gpios = <&pinctrl 23 1>;
+               };
+               power_red {
+                       label = "WAP-5813n:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               inet_red {
+                       label = "WAP-5813n:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&lsspi {
+       switch@0 {
+               compatible = "brcm,bcm53115";
+               reg = <0>;
+               spi-max-frequency = <781000>;
+
+               lede,alias = "eth0";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       lan@0 {
+                               reg = <0>;
+                               label = "lan4";
+                       };
+
+                       lan@1 {
+                               reg = <1>;
+                               label = "lan3";
+                       };
+
+                       lan@2 {
+                               reg = <2>;
+                               label = "lan2";
+                       };
+
+                       lan@3 {
+                               reg = <3>;
+                               label = "lan1";
+                       };
+
+                       wan@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       cpu@5 {
+                               reg = <5>;
+                               label = "cpu";
+
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                                       asym-pause;
+                                       pause;
+                               };
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts b/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts
new file mode 100644 (file)
index 0000000..93d4792
--- /dev/null
@@ -0,0 +1,124 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Netgear EVG2000";
+       compatible = "netgear,evg2000", "brcm,bcm6369", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 25 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 26 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               voip1_green {
+                       label = "EVG2000:green:voip1";
+                       gpios = <&pinctrl 14 1>;
+               };
+               voip2_green {
+                       label = "EVG2000:green:voip2";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_red {
+                       label = "EVG2000:red:inet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               inet_green {
+                       label = "EVG2000:green:inet";
+                       gpios = <&pinctrl 5 1>;
+               };
+               usb_green {
+                       label = "EVG2000:green:usb";
+                       gpios = <&pinctrl 15 1>;
+               };
+               power_green {
+                       label = "EVG2000:green:power";
+                       gpios = <&pinctrl 22 1>;
+                       default-state = "on";
+               };
+               power_red {
+                       label = "EVG2000:red:power";
+                       gpios = <&pinctrl 23 1>;
+               };
+               lan_green {
+                       label = "EVG2000:green:lan";
+                       gpios = <&pinctrl 24 1>;
+               };
+               wireless_green {
+                       label = "EVG2000:green:wireless";
+                       gpios = <&pinctrl 26 1>;
+               };
+               wan_green {
+                       label = "EVG2000:green:wan";
+                       gpios = <&pinctrl 27 1>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x00000000 0x00020000>;
+                       read-only;
+               };
+
+               linux@20000 {
+                       label = "linux";
+                       reg = <0x00020000 0x00f40000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               board_data@f60000 {
+                       label = "board_data";
+                       reg = <0x00f60000 0x00080000>;
+                       read-only;
+               };
+
+               nvram@fe0000 {
+                       label = "nvram";
+                       reg = <0x00fe0000 0x00020000>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};
diff --git a/target/linux/bcm63xx/generic/target.mk b/target/linux/bcm63xx/generic/target.mk
new file mode 100644 (file)
index 0000000..d43a37c
--- /dev/null
@@ -0,0 +1,7 @@
+BOARDNAME:=generic
+
+define Target/Description
+       Build firmware images for BCM63XX boards without SMP support.
+endef
+
+
diff --git a/target/linux/bcm63xx/image/Makefile b/target/linux/bcm63xx/image/Makefile
new file mode 100644 (file)
index 0000000..cc1660a
--- /dev/null
@@ -0,0 +1,179 @@
+#
+# Copyright (C) 2006-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE project
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+LOADADDR = 0x80010000          # RAM start + 64K
+KERNEL_ENTRY = $(LOADADDR)     # Newer kernels add a jmp to the kernel_entry at the start of the binary
+LOADER_ENTRY = 0x80a00000      # RAM start + 10M, for relocate
+RAMSIZE = 0x02000000           # 32MB
+LZMA_TEXT_START = 0x81800000   # 32MB - 8MB
+
+LOADER_MAKEOPTS= \
+               KDIR=$(KDIR) \
+               LOADADDR=$(LOADADDR) \
+               KERNEL_ENTRY=$(KERNEL_ENTRY) \
+               RAMSIZE=$(RAMSIZE) \
+               LZMA_TEXT_START=$(LZMA_TEXT_START) \
+
+RELOCATE_MAKEOPTS= \
+               CACHELINE_SIZE=16 \
+               KERNEL_ADDR=$(KERNEL_ENTRY) \
+               CROSS_COMPILE=$(TARGET_CROSS) \
+               LZMA_TEXT_START=$(LOADER_ENTRY)
+
+define Build/Compile
+       rm -rf $(KDIR)/relocate
+       $(CP) ../../generic/image/relocate $(KDIR)
+       $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
+endef
+
+### Kernel scripts ###
+define Build/hcs-initramfs
+       $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
+               --rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
+               --output_file=$@.hcs --ldaddress=$(LOADADDR)
+       mv $@.hcs $@
+endef
+
+define Build/loader-lzma
+       rm -rf $@.src
+       $(MAKE) -C lzma-loader \
+               $(LOADER_MAKEOPTS) \
+               PKG_BUILD_DIR="$@.src" \
+               TARGET_DIR="$(dir $@)" \
+               LOADER_DATA="$@" \
+               LOADER_NAME="$(notdir $@)" \
+               compile loader.$(1)
+       mv "$@.$(1)" "$@"
+       rm -rf $@.src
+endef
+
+define Build/lzma
+       # CFE is a LZMA nazi! It took me hours to find out the parameters!
+       # Also I think lzma has a bug cause it generates different output depending on
+       # if you use stdin / stdout or not. Use files instead of stdio here, cause
+       # otherwise CFE will complain and not boot the image.
+       $(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma
+       mv $@.lzma $@
+endef
+
+define Build/lzma-cfe
+       # Strip out the length, CFE doesn't like this
+       dd if=$@ of=$@.lzma.cfe bs=5 count=1
+       dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+       mv $@.lzma.cfe $@
+endef
+
+define Build/relocate-kernel
+       # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
+       # kernel might get larger than that, so let CFE unpack and load at a
+       # higher address and make the kernel relocate itself to the expected
+       # location.
+       ( \
+               dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
+               perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
+               cat $@ \
+       ) > $@.relocate
+       mv $@.relocate $@
+endef
+
+### Image scripts ###
+define rootfspad/jffs2-128k
+--align-rootfs
+endef
+define rootfspad/jffs2-64k
+--align-rootfs
+endef
+define rootfspad/squashfs
+endef
+
+define Image/LimitName16
+$(shell expr substr "$(1)" 1 16)
+endef
+
+define Image/FileSystemStrip
+$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
+endef
+
+define Build/cfe-bin
+       $(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
+               --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+               --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+               --info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
+               --info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \
+               $(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
+               $(CFE_EXTRAS) $(1)
+endef
+
+define Build/cfe-old-bin
+       $(TOPDIR)/scripts/brcmImage.pl -t -p \
+               -o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
+               -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
+               -k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) \
+               $(CFE_EXTRAS)
+endef
+
+define Build/cfe-spw303v-bin
+       $(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
+               --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+               --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+               $(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
+               $(CFE_EXTRAS) $(1)
+endef
+
+define Build/spw303v-bin
+       $(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
+       mv $@.spw303v $@
+endef
+
+define Build/zyxel-bin
+       $(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
+       mv $@.zyxel $@
+endef
+
+define Build/redboot-bin
+       # Prepare kernel and rootfs
+       dd if=$(IMAGE_KERNEL) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
+       dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) bs=64k conv=sync
+       echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))
+       # Generate the scripted image
+       $(TOPDIR)/scripts/redboot-script.pl \
+               -k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
+               -r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) \
+               -a $(strip $(LOADER_ENTRY)) -f 0xbe430000 -l 0x7c0000 \
+               -s 0x1000 -t 20 -o $@.redbootscript
+       dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
+       cat \
+               "$@.redbootscript.padded" \
+               "$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
+               "$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))" \
+               > "$@"
+endef
+
+define Device/Default
+  PROFILES = Default $$(DEVICE_NAME)
+  KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
+  KERNEL_INITRAMFS_SUFFIX := .elf
+  DEVICE_DTS_DIR := ../dts
+  SOC = bcm$$(CFE_CHIP_ID)
+  DEVICE_DTS = $$(SOC)-$(subst _,-,$(1))
+endef
+
+ATH5K_PACKAGES := kmod-ath5k wpad-basic
+ATH9K_PACKAGES := kmod-ath9k wpad-basic
+B43_PACKAGES := kmod-b43 wpad-basic
+BRCMWL_PACKAGES := kmod-brcm-wl nas wlc
+RT28_PACKAGES := kmod-rt2800-pci wpad-basic
+RT61_PACKAGES := kmod-rt61-pci wpad-basic
+USB1_PACKAGES := kmod-usb-ohci kmod-usb-ledtrig-usbport
+USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+
+include bcm63xx.mk
+
+$(eval $(call BuildImage))
diff --git a/target/linux/bcm63xx/image/README.images-bcm63xx b/target/linux/bcm63xx/image/README.images-bcm63xx
new file mode 100644 (file)
index 0000000..91b6d01
--- /dev/null
@@ -0,0 +1,127 @@
+The image neede to flash onto a Broadcom 63xx-series board depends on the
+board, method you are using to flash, and, for web-based flash, on the version
+of the Broadcom code your router uses.
+
+There are two major revisions of the Broadcom code as far as imagetags are
+concerned, before 3.08 and after 3.08, however there are some variations 
+within in that, either due to vendor differences or due to changes at 
+Broadcom (it's not clear yet which is the case).  In addtion Pirelli modified
+the Broadcom code, so Alice Gate models use a different imagetag than any 
+other vendor.
+
+The imagetag format for flashing via CFE is the same for almost all the 
+boards, and is the same for all images generated by the imagetag utility.
+Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
+
+The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
+and is known to be correct as the source code GPL and is available for reading.
+
+Broadcom code 2.21 is based on the BT Voyager firmware image I looked at.  It
+may in fact be BT Voyager-specific.  2.21 is actually more difficult to deal
+with the imagetag from 3.00 as it has three different CRC calculations in
+addtition to the header CRC.
+
+Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and 
+Tecom GW6000, and is the version of the flashing that was present before the
+imagetags were split by broadcom code version (early June 2009)
+
+3.04 is guessed to be the same as 3.00-3.02 based on available information
+
+Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06 
+this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
+which is known to be different due to vendor (Pirelli) modifications to the
+Broadcom code.
+
+Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
+versions, and has been tested on the Tecom GW6200.  This version introdec changes to
+the imagetag to deal with TR69 (a remote rouer management system developed by the
+DSL forum).  There is a field for vendor-specific information, that at least in some
+cases is not optional.  It is based on the hexedit of a neufbox4 firmware image, the
+information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
+GW6200 image.
+
+Some boards share the same tag format, but require vendor-specific fields in
+the board.  In that case the tagid is shared, but the filename of the generated
+image reflects the router for which the image was created.
+
+router        |method       | codever |filename
++-------------+-------------+---------+---------------------------------------
+|any          |cfe+most web |   any   |openwrt-<board>-<fs>-cfe.bin
+|AGVoIP2+WiFi |cfe          |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
+|AGVoIP2+WiFi |web          |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
+|CT536        |web          |3.02     |openwrt-CT536_CT5621-<fs>-cfe.bin
+|CT5621       |web          |3.02     |openwrt-CT536_CT5621-<fs>-cfe.bin
+|DG834GT      |web          |3.02     |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
+|DG834PN      |web          |3.02     |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
+|DSL-2640B    |web          |3.10     |openwrt-DSL2640B-<fs>-cfe.bin
+|DSL-2740B    |web          |3.10     |openwrt-DSL2670B-<fs>-cfe.bin
+|F5D7633      |web          |3.10     |openwrt-F5D7633-<fs>-cfe.bin
+|F@ST2404     |web          |3.0X?    |openwrt-F@ST2404-cfe-<fs>-cfe.bin
+|F@ST2404     |web          |3.1X?    |openwrt-F@ST2404-<fs>-cfe.bin
+|GW6000       |web          |3.00     |openwrt-GW6000-<fs>-cfe.bin
+|GW6200       |web          |3.10     |openwrt-GW6200-<fs>-cfe.bin
+|Neufbox4     |web          |3.12     |openwrt-NEUFBOX4-<fs>-cfe.bin
+|TD8810A      |web          |3.06     |openwrt-TD8810-<fs>-cfe.bin
+|TD8810B      |web          |3.06     |openwrt-TD8810-<fs>-cfe.bin
+|TD8811A      |web          |3.06     |openwrt-TD8811-<fs>-cfe.bin
+|TD8811B      |web          |3.06     |openwrt-TD881-<fs>-cfe.bin
+|TD8900GB     |web          |3.06     |openwrt-TD8900DB<fs>-cfe.bin
+|USR9108      |web          |3.0X?    |openwrt-USR9108-<fs>-cfe.bin
+|V2091_BTR    |web          |2.21     |openwrt-V2091_BTR-<fs>-cfe.bin
+|V2091_ROI    |web          |2.21     |openwrt-V2091-<fs>-cfe.bin
+|V2091_WB     |web          |2.21     |openwrt-V2091-<fs>-cfe.bin
+|V210_BTR     |web          |2.21     |openwrt-V210_BTR-<fs>-cfe.bin
+|V210_ROI     |web          |2.21     |openwrt-V210-ROI_WB<fs>-cfe.bin
+|V210_WB      |web          |2.21     |openwrt-V210-ROI_WB<fs>-cfe.bin
+|V2110        |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
+|V2110_AA     |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
+|V2110_ROI    |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
+|V2500V       |web          |2.21     |openwrt-V2500V<fs>-cfe.bin
+|V2500V_AA    |web          |2.21     |openwrt-V2500V-<fs>-cfe.bin
+|V2500V_SIP_CLUB |web       |2.21     |openwrt-V2500V-<fs>-cfe.bin
+
+Old imagetag routers
+--------------------
+Davolink DV201AMR
+
+Redboot routers
+---------------
+Inventel Livebox
+
+Known router->code versions
+---------------------------
+
+Vendor                     |Model                                     |Code Ver
+---------------------------+------------------------------------------+--------
+Belkin                     |F5D7633                                   |3.10
+British Telecom (BT)       |Voyager V2091_BTR                         |2.21
+British Telecom (BT)       |Voyager V2091_ROI                         |2.21
+British Telecom (BT)       |Voyager V2091_WB                          |2.21
+British Telecom (BT)       |Voyager V210_BTR                          |2.21
+British Telecom (BT)       |Voyager V210_ROI                          |2.21
+British Telecom (BT)       |Voyager V210_WB                           |2.21
+British Telecom (BT)       |Voyager V2110                             |2.21
+British Telecom (BT)       |Voyager V2110_AA                          |2.21
+British Telecom (BT)       |Voyager V2110_ROI                         |2.21
+British Telecom (BT)       |Voyager V220V                             |2.21
+British Telecom (BT)       |Voyager V2500V                            |2.21
+British Telecom (BT)       |Voyager V2500V_AA                         |2.21
+British Telecom (BT)       |Voyager V2500V_SIP_CLUB                   |2.21
+Comtrend                   |CT-5261                                   |3.02
+Comtrend                   |CT-536                                    |3.02
+D-Link                     |DSL-2640B                                 |3.10
+D-Link                     |DSL-2670B                                 |3.10
+NetGear                           |DG834GT                                   |3.02
+NetGear                           |DG834PN                                   |3.02
+Neuf Cegetel               |Neufbox 4                                 |3.12
+Pirelli                    |Alice Gate Wi-Fi (+VoIP models?)          |ag 3.06
+Sagem                     |F@ST2404                                  |?
+TP-Link                    |TD-8810A                                  |3.06
+TP-Link                           |TD-8810B                                  |3.06
+TP-Link                           |TD-8811A                                  |3.06
+TP-Link                           |TD-8811B                                  |3.06
+TP-Link                           |TD-W8900GB                                |3.06
+Tecom                      |GW6000                                    |3.00
+Tecom                      |GW6200                                    |3.10
+USR                       |9108                                      |?
+
diff --git a/target/linux/bcm63xx/image/bcm63xx.mk b/target/linux/bcm63xx/image/bcm63xx.mk
new file mode 100644 (file)
index 0000000..265fa09
--- /dev/null
@@ -0,0 +1,1151 @@
+
+#
+# BCM33XX/BCM63XX Profiles
+#
+
+define Device/bcm33xx
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs
+  IMAGES :=
+  HCS_MAGIC_BYTES :=
+  HCS_REV_MIN :=
+  HCS_REV_MAJ :=
+endef
+DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
+
+define Device/bcm63xx
+  FILESYSTEMS := squashfs jffs2-64k jffs2-128k
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | lzma-cfe
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+  IMAGES := cfe.bin
+  IMAGE/cfe.bin := cfe-bin --pad $$$$(shell expr $$$$(FLASH_MB) / 2)
+  IMAGE/cfe-4M.bin := cfe-bin --pad 2
+  IMAGE/cfe-8M.bin := cfe-bin --pad 4
+  IMAGE/cfe-16M.bin := cfe-bin --pad 8
+  IMAGE/cfe-bc221.bin := cfe-bin --layoutver 5
+  IMAGE/cfe-old.bin := cfe-old-bin
+  IMAGE/sysupgrade.bin := cfe-bin
+  BLOCK_SIZE := 0x10000
+  IMAGE_OFFSET :=
+  FLASH_MB := 4
+  CFE_BOARD_ID :=
+  CFE_CHIP_ID :=
+  CFE_EXTRAS = --block-size $$(BLOCK_SIZE) --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCK_SIZE))
+endef
+DEVICE_VARS += BLOCK_SIZE FLASH_MB IMAGE_OFFSET
+DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
+
+define Device/bcm63xx_netgear
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := NETGEAR
+  IMAGES := factory.chk sysupgrade.bin
+  IMAGE/factory.chk := cfe-bin | netgear-chk
+  NETGEAR_BOARD_ID :=
+  NETGEAR_REGION :=
+endef
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
+
+define Device/bcm63xx_redboot
+  FILESYSTEMS := squashfs
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | gzip
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+  IMAGES := redboot.bin
+  IMAGE/redboot.bin := redboot-bin
+  REDBOOT_PREFIX := $$(IMAGE_PREFIX)
+endef
+DEVICE_VARS += REDBOOT_PREFIX
+
+### Generic ###
+define Device/brcm_bcm963281tan
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 963281TAN
+  IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
+  CFE_BOARD_ID := 963281TAN
+  CFE_CHIP_ID := 6328
+endef
+TARGET_DEVICES += brcm_bcm963281tan
+
+define Device/brcm_bcm96328avng
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96328avng
+  IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
+  CFE_BOARD_ID := 96328avng
+  CFE_CHIP_ID := 6328
+endef
+TARGET_DEVICES += brcm_bcm96328avng
+
+define Device/brcm_bcm96338gw
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96338GW
+  CFE_BOARD_ID := 6338GW
+  CFE_CHIP_ID := 6338
+endef
+TARGET_DEVICES += brcm_bcm96338gw
+
+define Device/brcm_bcm96338w
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96338W
+  CFE_BOARD_ID := 6338W
+  CFE_CHIP_ID := 6338
+endef
+TARGET_DEVICES += brcm_bcm96338w
+
+define Device/brcm_bcm96345gw2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96345GW2
+  IMAGES += cfe-bc221.bin
+  CFE_BOARD_ID := 96345GW2
+  CFE_CHIP_ID := 6345
+  DEFAULT := n
+endef
+TARGET_DEVICES += brcm_bcm96345gw2
+
+define Device/brcm_bcm96348gw
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96348GW
+  IMAGES += cfe-bc221.bin
+  CFE_BOARD_ID := 96348GW
+  CFE_CHIP_ID := 6348
+endef
+TARGET_DEVICES += brcm_bcm96348gw
+
+define Device/brcm_bcm96348gw-10
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96348GW-10
+  CFE_BOARD_ID := 96348GW-10
+  CFE_CHIP_ID := 6348
+endef
+TARGET_DEVICES += brcm_bcm96348gw-10
+
+define Device/brcm_bcm96348gw-11
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96348GW-11
+  CFE_BOARD_ID := 96348GW-11
+  CFE_CHIP_ID := 6348
+endef
+TARGET_DEVICES += brcm_bcm96348gw-11
+
+define Device/brcm_bcm96348r
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96348R
+  CFE_BOARD_ID := 96348R
+  CFE_CHIP_ID := 6348
+endef
+TARGET_DEVICES += brcm_bcm96348r
+
+define Device/brcm_bcm96358vw
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96358VW
+  CFE_BOARD_ID := 96358VW
+  CFE_CHIP_ID := 6358
+endef
+TARGET_DEVICES += brcm_bcm96358vw
+
+define Device/brcm_bcm96358vw2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96358VW2
+  CFE_BOARD_ID := 96358VW2
+  CFE_CHIP_ID := 6358
+endef
+TARGET_DEVICES += brcm_bcm96358vw2
+
+define Device/brcm_bcm96368mvngr
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96368MVNgr
+  CFE_BOARD_ID := 96368MVNgr
+  CFE_CHIP_ID := 6368
+endef
+TARGET_DEVICES += brcm_bcm96368mvngr
+
+define Device/brcm_bcm96368mvwg
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Generic
+  DEVICE_MODEL := 96368MVWG
+  CFE_BOARD_ID := 96368MVWG
+  CFE_CHIP_ID := 6368
+endef
+TARGET_DEVICES += brcm_bcm96368mvwg
+
+### Actiontec ###
+define Device/actiontec_r1000h
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Actiontec
+  DEVICE_MODEL := R1000H
+  FILESYSTEMS := squashfs
+  CFE_BOARD_ID := 96368MVWG
+  CFE_CHIP_ID := 6368
+  FLASH_MB := 32
+  IMAGE_OFFSET := 0x20000
+  DEVICE_PACKAGES := $(USB2_PACKAGES) $(BRCMWL_PACKAGES)
+endef
+TARGET_DEVICES += actiontec_r1000h
+
+### ADB ###
+define Device/adb_a4001n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := ADB
+  DEVICE_MODEL := P.DG A4001N
+  CFE_BOARD_ID := 96328dg2x2
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
+endef
+TARGET_DEVICES += adb_a4001n
+
+define Device/adb_a4001n1
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := ADB
+  DEVICE_MODEL := P.DG A4001N1
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 963281T_TEF
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
+endef
+TARGET_DEVICES += adb_a4001n1
+
+define Device/adb_av4202n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := ADB
+  DEVICE_MODEL := P.DG AV4202N
+  IMAGE_OFFSET := 0x20000
+  CFE_BOARD_ID := 96368_Swiss_S1
+  CFE_CHIP_ID := 6368
+  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
+endef
+TARGET_DEVICES += adb_av4202n
+
+### Alcatel ###
+define Device/alcatel_rg100a
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Alcatel
+  DEVICE_MODEL := RG100A
+  CFE_BOARD_ID := 96358VW2
+  CFE_CHIP_ID := 6358
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
+endef
+TARGET_DEVICES += alcatel_rg100a
+
+### Asmax ###
+define Device/asmax_ar-1004g
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Asmax
+  DEVICE_MODEL := AR 1004g
+  CFE_BOARD_ID := 96348GW-10
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += asmax_ar-1004g
+
+### Belkin ###
+define Device/belkin_f5d7633
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Belkin
+  DEVICE_MODEL := F5D7633
+  CFE_BOARD_ID := 96348GW-10
+  CFE_CHIP_ID := 6348
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += belkin_f5d7633
+
+### Broadcom ###
+define Device/brcm_bcm96318ref
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Broadcom
+  DEVICE_MODEL := BCM96318REF reference board
+  IMAGES :=
+  CFE_BOARD_ID := 96318REF
+  CFE_CHIP_ID := 6318
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES) kmod-bcm63xx-udc
+endef
+TARGET_DEVICES += brcm_bcm96318ref
+
+define Device/brcm_bcm96318ref-p300
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Broadcom
+  DEVICE_MODEL := BCM96318REF_P300 reference board
+  IMAGES :=
+  CFE_BOARD_ID := 96318REF_P300
+  CFE_CHIP_ID := 6318
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES) kmod-bcm63xx-udc
+endef
+TARGET_DEVICES += brcm_bcm96318ref-p300
+
+define Device/brcm_bcm963268bu-p300
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Broadcom
+  DEVICE_MODEL := BCM963268BU_P300 reference board
+  IMAGES :=
+  CFE_BOARD_ID := 963268BU_P300
+  CFE_CHIP_ID := 63268
+  DEVICE_PACKAGES := $(USB2_PACKAGES) kmod-bcm63xx-udc
+endef
+TARGET_DEVICES += brcm_bcm963268bu-p300
+
+define Device/brcm_bcm963269bhr
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Broadcom
+  DEVICE_MODEL := BCM963269BHR reference board
+  IMAGES :=
+  CFE_BOARD_ID := 963269BHR
+  CFE_CHIP_ID := 63268
+  SOC := bcm63269
+  DEVICE_PACKAGES := $(USB2_PACKAGES) kmod-bcm63xx-udc
+endef
+TARGET_DEVICES += brcm_bcm963269bhr
+
+### BT ###
+define Device/bt_home-hub-2-a
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := BT
+  DEVICE_MODEL := Home Hub 2.0
+  DEVICE_VARIANT := A
+  CFE_BOARD_ID := HOMEHUB2A
+  CFE_CHIP_ID := 6358
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += bt_home-hub-2-a
+
+define Device/bt_voyager-2110
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := BT
+  DEVICE_MODEL := Voyager 2110
+  CFE_BOARD_ID := V2110
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --layoutver 5
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += bt_voyager-2110
+
+define Device/bt_voyager-2500v-bb
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := BT
+  DEVICE_MODEL := Voyager 2500V
+  CFE_BOARD_ID := V2500V_BB
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --layoutver 5
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += bt_voyager-2500v-bb
+
+### Comtrend ###
+define Device/comtrend_ar-5315u
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5315u
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96318A-1441N1
+  CFE_CHIP_ID := 6318
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_ar-5315u
+
+define Device/comtrend_ar-5381u
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5381u
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96328A-1241N
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_ar-5381u
+
+define Device/comtrend_ar-5387un
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := AR-5387un
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96328A-1441N1
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_ar-5387un
+
+define Device/comtrend_ct-536plus
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := CT-536+
+  DEVICE_ALT0_VENDOR := Comtrend
+  DEVICE_ALT0_MODEL := CT-5621
+  CFE_BOARD_ID := 96348GW-11
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += comtrend_ct-536plus
+
+define Device/comtrend_ct-5365
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := CT-5365
+  CFE_BOARD_ID := 96348A-122
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += comtrend_ct-5365
+
+define Device/comtrend_ct-6373
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := CT-6373
+  CFE_BOARD_ID := CT6373-1
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_ct-6373
+
+define Device/comtrend_vr-3025u
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VR-3025u
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96368M-1541N
+  CFE_CHIP_ID := 6368
+  BLOCK_SIZE := 0x20000
+  FLASH_MB := 32
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_vr-3025u
+
+define Device/comtrend_vr-3025un
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VR-3025un
+  CFE_BOARD_ID := 96368M-1341N
+  CFE_CHIP_ID := 6368
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_vr-3025un
+
+define Device/comtrend_vr-3026e
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := VR-3026e
+  CFE_BOARD_ID := 96368MT-1341N1
+  CFE_CHIP_ID := 6368
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_vr-3026e
+
+define Device/comtrend_wap-5813n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Comtrend
+  DEVICE_MODEL := WAP-5813n
+  CFE_BOARD_ID := 96369R-1231N
+  CFE_CHIP_ID := 6368
+  FLASH_MB := 8
+  SOC := bcm6369
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += comtrend_wap-5813n
+
+### D-Link ###
+define Device/d-link_dsl-2640b-b
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2640B
+  DEVICE_VARIANT := B2
+  CFE_BOARD_ID := D-4P-W
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += d-link_dsl-2640b-b
+
+define Device/d-link_dsl-2640u
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2640U
+  DEVICE_VARIANT := C1
+  DEVICE_ALT0_VENDOR := D-Link
+  DEVICE_ALT0_MODEL := DSL-2640U/BRU/C
+  CFE_BOARD_ID := 96338W2_E7T
+  CFE_CHIP_ID := 6338
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += d-link_dsl-2640u
+
+define Device/d-link_dsl-2650u
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2650U
+  CFE_BOARD_ID := 96358VW2
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dsl-2650u
+
+define Device/d-link_dsl-274xb-c2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2740B
+  DEVICE_VARIANT := C2
+  DEVICE_ALT0_VENDOR := D-Link
+  DEVICE_ALT0_MODEL := DSL-2741B
+  DEVICE_ALT0_VARIANT := C2
+  CFE_BOARD_ID := 96358GW
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dsl-274xb-c2
+
+define Device/d-link_dsl-274xb-c3
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2740B
+  DEVICE_VARIANT := C3
+  DEVICE_ALT0_VENDOR := D-Link
+  DEVICE_ALT0_MODEL := DSL-2741B
+  DEVICE_ALT0_VARIANT := C3
+  DEVICE_DTS := bcm6358-d-link-dsl-274xb-c2
+  CFE_BOARD_ID := AW4139
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dsl-274xb-c3
+
+define Device/d-link_dsl-274xb-f1
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2740B
+  DEVICE_VARIANT := F1
+  DEVICE_ALT0_VENDOR := D-Link
+  DEVICE_ALT0_MODEL := DSL-2741B
+  DEVICE_ALT0_VARIANT := F1
+  CFE_BOARD_ID := AW4339U
+  CFE_CHIP_ID := 6328
+  IMAGES := cfe-EU.bin cfe-AU.bin
+  IMAGE/cfe-AU.bin := cfe-bin --signature2 "4.06.01.AUF1" --pad 4
+  IMAGE/cfe-EU.bin := cfe-bin --signature2 "4.06.01.EUF1" --pad 4
+  DEVICE_PACKAGES := $(ATH9K_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dsl-274xb-f1
+
+define Device/d-link_dsl-275xb-d1
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DSL-2750B
+  DEVICE_VARIANT := D1
+  DEVICE_ALT0_VENDOR := D-Link
+  DEVICE_ALT0_MODEL := DSL-2751
+  DEVICE_ALT0_VARIANT := D1
+  CFE_BOARD_ID := AW5200B
+  CFE_CHIP_ID := 6318
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dsl-275xb-d1
+
+define Device/d-link_dva-g3810bn-tl
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DVA-G3810BN/TL
+  CFE_BOARD_ID := 96358VW
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += d-link_dva-g3810bn-tl
+
+### Davolink ###
+define Device/davolink_dv-201amr
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Davolink
+  DEVICE_MODEL := DV-201AMR
+  IMAGES := cfe-old.bin
+  CFE_BOARD_ID := DV201AMR
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += davolink_dv-201amr
+
+### Dynalink ###
+define Device/dynalink_rta770bw
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Dynalink
+  DEVICE_MODEL := RTA770BW
+  DEVICE_ALT0_VENDOR := Siemens
+  DEVICE_ALT0_MODEL := SE515
+  IMAGES =
+  CFE_BOARD_ID := RTA770BW
+  CFE_CHIP_ID := 6345
+  CFE_EXTRAS += --layoutver 5
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += dynalink_rta770bw
+
+define Device/dynalink_rta770w
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Dynalink
+  DEVICE_MODEL := RTA770W
+  IMAGES =
+  CFE_BOARD_ID := RTA770W
+  CFE_CHIP_ID := 6345
+  CFE_EXTRAS += --layoutver 5
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += dynalink_rta770w
+
+define Device/dynalink_rta1025w
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Dynalink
+  DEVICE_MODEL := RTA1025W
+  CFE_BOARD_ID := RTA1025W_16
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --layoutver 5
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += dynalink_rta1025w
+
+define Device/dynalink_rta1320
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Dynalink
+  DEVICE_MODEL := RTA1320
+  CFE_BOARD_ID := RTA1320_16M
+  CFE_CHIP_ID := 6338
+  CFE_EXTRAS += --layoutver 5
+  DEFAULT := n
+endef
+TARGET_DEVICES += dynalink_rta1320
+
+### Huawei ###
+define Device/huawei_echolife-hg520v
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG520v
+  CFE_BOARD_ID := HW6358GW_B
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG520v"
+  SOC := bcm6359
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg520v
+
+define Device/huawei_echolife-hg553
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG553
+  CFE_BOARD_ID := HW553
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG553" --tag-version 7
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg553
+
+define Device/huawei_echolife-hg556a-a
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG556a
+  DEVICE_VARIANT := A
+  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version A (Atheros)
+  CFE_BOARD_ID := HW556
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
+  IMAGE_OFFSET := 0x20000
+  DEVICE_PACKAGES := $(ATH9K_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg556a-a
+
+define Device/huawei_echolife-hg556a-b
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG556a
+  DEVICE_VARIANT := B
+  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version B (Atheros)
+  CFE_BOARD_ID := HW556
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(ATH9K_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg556a-b
+
+define Device/huawei_echolife-hg556a-c
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG556a
+  DEVICE_VARIANT := C
+  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version C (Ralink)
+  CFE_BOARD_ID := HW556
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg556a-c
+
+define Device/huawei_echolife-hg622
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG622
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96368MVWG_hg622
+  CFE_CHIP_ID := 6368
+  CFE_EXTRAS += --tag-version 7
+  BLOCK_SIZE := 0x20000
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg622
+
+define Device/huawei_echolife-hg655b
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Huawei
+  DEVICE_MODEL := EchoLife HG655b
+  CFE_BOARD_ID := HW65x
+  CFE_CHIP_ID := 6368
+  CFE_EXTRAS += --tag-version 7
+  IMAGE_OFFSET := 0x20000
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += huawei_echolife-hg655b
+
+### Inteno ###
+define Device/inteno_vg50
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Inteno
+  DEVICE_MODEL := VG50 Multi-WAN CPE
+  IMAGES :=
+  CFE_BOARD_ID := VW6339GU
+  CFE_CHIP_ID := 63268
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += inteno_vg50
+
+### Inventel ###
+define Device/inventel_livebox-1
+  $(Device/bcm63xx_redboot)
+  DEVICE_VENDOR := Inventel
+  DEVICE_MODEL := Livebox 1
+  SOC := bcm6348
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB1_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += inventel_livebox-1
+
+### Netgear ###
+define Device/netgear_cvg834g
+  $(Device/bcm33xx)
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := CVG834G
+  SOC := bcm3368
+  HCS_MAGIC_BYTES := 0xa020
+  HCS_REV_MIN := 0001
+  HCS_REV_MAJ := 0022
+endef
+TARGET_DEVICES += netgear_cvg834g
+
+define Device/netgear_dg834gt-pn
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := DG834GT
+  DEVICE_ALT0_VENDOR := NETGEAR
+  DEVICE_ALT0_MODEL := DG834PN
+  CFE_BOARD_ID := 96348GW-10
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(ATH5K_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += netgear_dg834gt-pn
+
+define Device/netgear_dg834g-v4
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := DG834G
+  DEVICE_VARIANT := v4
+  IMAGES :=
+  CFE_BOARD_ID := 96348W3
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += netgear_dg834g-v4
+
+define Device/netgear_dgnd3700-v1
+  $(Device/bcm63xx_netgear)
+  DEVICE_MODEL := DGND3700
+  DEVICE_VARIANT := v1
+  CFE_BOARD_ID := 96368MVWG
+  CFE_CHIP_ID := 6368
+  BLOCK_SIZE := 0x20000
+  NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
+  NETGEAR_REGION := 1
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += netgear_dgnd3700-v1
+
+define Device/netgear_dgnd3800b
+  $(Device/bcm63xx_netgear)
+  DEVICE_MODEL := DGND3800B
+  DEVICE_DTS := bcm6368-netgear-dgnd3700-v1
+  CFE_BOARD_ID := 96368MVWG
+  CFE_CHIP_ID := 6368
+  BLOCK_SIZE := 0x20000
+  NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
+  NETGEAR_REGION := 1
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += netgear_dgnd3800b
+
+define Device/netgear_evg2000
+  $(Device/bcm63xx_netgear)
+  DEVICE_MODEL := EVG2000
+  CFE_BOARD_ID := 96369PVG
+  CFE_CHIP_ID := 6368
+  BLOCK_SIZE := 0x20000
+  NETGEAR_BOARD_ID := U12H154T90_NETGEAR
+  NETGEAR_REGION := 1
+  SOC := bcm6369
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += netgear_evg2000
+
+### NuCom ###
+define Device/nucom_r5010un-v2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := NuCom
+  DEVICE_MODEL := R5010UN
+  DEVICE_VARIANT := v2
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96328ang
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 16
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += nucom_r5010un-v2
+
+### Observa ###
+define Device/observa_vh4032n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Observa
+  DEVICE_MODEL := VH4032N
+  IMAGES += sysupgrade.bin
+  CFE_BOARD_ID := 96368VVW
+  CFE_CHIP_ID := 6368
+  BLOCK_SIZE := 0x20000
+  FLASH_MB := 32
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += observa_vh4032n
+
+### Pirelli ###
+define Device/pirelli_a226g
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Pirelli
+  DEVICE_MODEL := A226G
+  CFE_BOARD_ID := DWV-S0
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += pirelli_a226g
+
+define Device/pirelli_a226m
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Pirelli
+  DEVICE_MODEL := A226M
+  CFE_BOARD_ID := DWV-S0
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += pirelli_a226m
+
+define Device/pirelli_a226m-fwb
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Pirelli
+  DEVICE_MODEL := A226M-FWB
+  CFE_BOARD_ID := DWV-S0
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += pirelli_a226m-fwb
+
+define Device/pirelli_agpf-s0
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Pirelli
+  DEVICE_MODEL := Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
+  CFE_BOARD_ID := AGPF-S0
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
+  BLOCK_SIZE := 0x20000
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += pirelli_agpf-s0
+
+### Sagem ###
+define Device/sagem_fast-2404
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sagemcom
+  DEVICE_MODEL := F@st 2404
+  CFE_BOARD_ID := F@ST2404
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += sagem_fast-2404
+
+define Device/sagem_fast-2504n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sagemcom
+  DEVICE_MODEL := F@st 2504N
+  CFE_BOARD_ID := F@ST2504n
+  CFE_CHIP_ID := 6362
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += sagem_fast-2504n
+
+define Device/sagem_fast-2604
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sagemcom
+  DEVICE_MODEL := F@st 2604
+  CFE_BOARD_ID := F@ST2604
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += sagem_fast-2604
+
+define Device/sagem_fast-2704n
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sagemcom
+  DEVICE_MODEL := F@st 2704N
+  CFE_BOARD_ID := F@ST2704N
+  CFE_CHIP_ID := 6318
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sagem_fast-2704n
+
+define Device/sagem_fast-2704-v2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sagemcom
+  DEVICE_MODEL := F@st 2704
+  DEVICE_VARIANT := V2
+  CFE_BOARD_ID := F@ST2704V2
+  CFE_CHIP_ID := 6328
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sagem_fast-2704-v2
+
+### Sercomm ###
+define Device/sercomm_ad1018-nor
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Sercomm
+  DEVICE_MODEL := AD1018
+  DEVICE_VARIANT := SPI flash mod
+  CFE_BOARD_ID := 96328avngr
+  CFE_CHIP_ID := 6328
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sercomm_ad1018-nor
+
+### SFR ###
+define Device/sfr_neufbox-4-sercomm-r0
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := SFR
+  DEVICE_MODEL := Neufbox 4
+  DEVICE_VARIANT := Sercomm
+  CFE_BOARD_ID := 96358VW
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sfr_neufbox-4-sercomm-r0
+
+define Device/sfr_neufbox-4-foxconn-r1
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := SFR
+  DEVICE_MODEL := Neufbox 4
+  DEVICE_VARIANT := Foxconn
+  CFE_BOARD_ID := 96358VW
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sfr_neufbox-4-foxconn-r1
+
+define Device/sfr_neufbox-6-sercomm-r0
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := SFR
+  DEVICE_MODEL := Neufbox 6
+  CFE_BOARD_ID := NB6-SER-r0
+  CFE_CHIP_ID := 6362
+  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+  SOC := bcm6361
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sfr_neufbox-6-sercomm-r0
+
+define Device/sky_sr102
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := SKY
+  DEVICE_MODEL := SR102
+  CFE_BOARD_ID := BSKYB_63168
+  CFE_CHIP_ID := 63268
+  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+  SOC := bcm63168
+  DEVICE_PACKAGES := $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += sky_sr102
+
+### T-Com ###
+define Device/t-com_speedport-w-303v
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := T-Com
+  DEVICE_MODEL := Speedport W 303V
+  IMAGES := factory.bin sysupgrade.bin
+  IMAGE/factory.bin := cfe-spw303v-bin --pad 4 | spw303v-bin | xor-image
+  IMAGE/sysupgrade.bin := cfe-spw303v-bin | spw303v-bin
+  CFE_BOARD_ID := 96358-502V
+  CFE_CHIP_ID := 6358
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += t-com_speedport-w-303v
+
+define Device/t-com_speedport-w-500v
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := T-Com
+  DEVICE_MODEL := Speedport W 500V
+  CFE_BOARD_ID := 96348GW
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += t-com_speedport-w-500v
+
+### Tecom ###
+define Device/tecom_gw6000
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Tecom
+  DEVICE_MODEL := GW6000
+  CFE_BOARD_ID := 96348GW
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(BRCMWL_PACKAGES) $(USB1_PACKAGES)
+endef
+TARGET_DEVICES += tecom_gw6000
+
+define Device/tecom_gw6200
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Tecom
+  DEVICE_MODEL := GW6200
+  CFE_BOARD_ID := 96348GW
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --rsa-signature "$(shell printf '\x99')"
+  DEVICE_PACKAGES := $(BRCMWL_PACKAGES) $(USB1_PACKAGES)
+endef
+TARGET_DEVICES += tecom_gw6200
+
+### Telsey ###
+define Device/telsey_cpva502plus
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Telsey
+  DEVICE_MODEL := CPVA502+
+  CFE_BOARD_ID := CPVA502+
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999"
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += telsey_cpva502plus
+
+define Device/telsey_cpva642
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Telsey
+  DEVICE_MODEL := CPVA642-type (CPA-ZNTE60T)
+  CFE_BOARD_ID := CPVA642
+  CFE_CHIP_ID := 6358
+  CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0"
+  FLASH_MB := 8
+  DEVICE_PACKAGES := $(RT63_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += telsey_cpva642
+
+define Device/telsey_magic
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := Alice
+  DEVICE_MODEL := W-Gate
+  DEVICE_ALT0_VENDOR := Telsey
+  DEVICE_ALT0_MODEL := MAGIC
+  IMAGES :=
+  CFE_BOARD_ID := MAGIC
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(RT63_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += telsey_magic
+
+### TP-Link ###
+define Device/tp-link_td-w8900gb
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := TD-W8900GB
+  CFE_BOARD_ID := 96348GW-11
+  CFE_CHIP_ID := 6348
+  CFE_EXTRAS += --rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')"
+  IMAGE_OFFSET := 0x20000
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += tp-link_td-w8900gb
+
+### USRobotics ###
+define Device/usrobotics_usr9108
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := USRobotics
+  DEVICE_MODEL := USR9108
+  CFE_BOARD_ID := 96348GW-A
+  CFE_CHIP_ID := 6348
+  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB1_PACKAGES)
+  DEFAULT := n
+endef
+TARGET_DEVICES += usrobotics_usr9108
+
+### ZyXEL ###
+define Device/zyxel_p870hw-51a-v2
+  $(Device/bcm63xx)
+  DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := P870HW-51a
+  DEVICE_VARIANT := v2
+  IMAGES := factory.bin
+  IMAGE/factory.bin := cfe-bin | zyxel-bin
+  CFE_BOARD_ID := 96368VVW
+  CFE_CHIP_ID := 6368
+  CFE_EXTRAS += --rsa-signature "ZyXEL" --signature "ZyXEL_0001"
+  DEVICE_PACKAGES := $(B43_PACKAGES)
+endef
+TARGET_DEVICES += zyxel_p870hw-51a-v2
diff --git a/target/linux/bcm63xx/image/lzma-loader/Makefile b/target/linux/bcm63xx/image/lzma-loader/Makefile
new file mode 100644 (file)
index 0000000..8d36691
--- /dev/null
@@ -0,0 +1,62 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LZMA_TEXT_START        := 0x80a00000
+LOADER         := loader.bin
+LOADER_NAME    := $(basename $(notdir $(LOADER)))
+LOADER_DATA    :=
+TARGET_DIR     :=
+FLASH_OFFS     :=
+FLASH_MAX      :=
+
+ifeq ($(TARGET_DIR),)
+TARGET_DIR     := $(KDIR)
+endif
+
+LOADER_BIN     := $(TARGET_DIR)/$(LOADER_NAME).bin
+LOADER_GZ      := $(TARGET_DIR)/$(LOADER_NAME).gz
+LOADER_ELF     := $(TARGET_DIR)/$(LOADER_NAME).elf
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
+
+.PHONY : loader-compile loader.bin loader.elf loader.gz
+
+$(PKG_BUILD_DIR)/.prepared:
+       mkdir $(PKG_BUILD_DIR)
+       $(CP) ./src/* $(PKG_BUILD_DIR)/
+       touch $@
+
+loader-compile: $(PKG_BUILD_DIR)/.prepared
+       $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
+               LZMA_TEXT_START=$(LZMA_TEXT_START) \
+               LOADER_DATA=$(LOADER_DATA) \
+               FLASH_OFFS=$(FLASH_OFFS) \
+               FLASH_MAX=$(FLASH_MAX) \
+               clean all
+
+loader.gz: $(PKG_BUILD_DIR)/loader.bin
+       gzip -nc9 $< > $(LOADER_GZ)
+
+loader.elf: $(PKG_BUILD_DIR)/loader.elf
+       $(CP) $< $(LOADER_ELF)
+
+loader.bin: $(PKG_BUILD_DIR)/loader.bin
+       $(CP) $< $(LOADER_BIN)
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: loader-compile
+
+install:
+
+clean:
+       rm -rf $(PKG_BUILD_DIR)
+
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.c
new file mode 100644 (file)
index 0000000..cb83453
--- /dev/null
@@ -0,0 +1,584 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+  
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to 
+  statically or dynamically link your Code (or bind by name) to the 
+  interfaces of this file without subjecting your linked Code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
+  
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+  unsigned char prop0;
+  if (size < LZMA_PROPERTIES_SIZE)
+    return LZMA_RESULT_DATA_ERROR;
+  prop0 = propsData[0];
+  if (prop0 >= (9 * 5 * 5))
+    return LZMA_RESULT_DATA_ERROR;
+  {
+    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+    propsRes->lc = prop0;
+    /*
+    unsigned char remainder = (unsigned char)(prop0 / 9);
+    propsRes->lc = prop0 % 9;
+    propsRes->pb = remainder / 5;
+    propsRes->lp = remainder % 5;
+    */
+  }
+
+  #ifdef _LZMA_OUT_READ
+  {
+    int i;
+    propsRes->DictionarySize = 0;
+    for (i = 0; i < 4; i++)
+      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+    if (propsRes->DictionarySize == 0)
+      propsRes->DictionarySize = 1;
+  }
+  #endif
+  return LZMA_RESULT_OK;
+}
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+  CProb *p = vs->Probs;
+  SizeT nowPos = 0;
+  Byte previousByte = 0;
+  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+  int lc = vs->Properties.lc;
+
+  #ifdef _LZMA_OUT_READ
+  
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  const Byte *Buffer = vs->Buffer;
+  const Byte *BufferLim = vs->BufferLim;
+  #else
+  const Byte *Buffer = inStream;
+  const Byte *BufferLim = inStream + inSize;
+  #endif
+  int state = vs->State;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+  UInt32 distanceLimit = vs->DistanceLimit;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->Properties.DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+  if (len == kLzmaStreamWasFinishedId)
+    return LZMA_RESULT_OK;
+
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == kLzmaNeedInitId)
+  {
+    {
+      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+      UInt32 i;
+      for (i = 0; i < numProbs; i++)
+        p[i] = kBitModelTotal >> 1; 
+      rep0 = rep1 = rep2 = rep3 = 1;
+      state = 0;
+      globalPos = 0;
+      distanceLimit = 0;
+      dictionaryPos = 0;
+      dictionary[dictionarySize - 1] = 0;
+      #ifdef _LZMA_IN_CB
+      RC_INIT;
+      #else
+      RC_INIT(inStream, inSize);
+      #endif
+    }
+    len = 0;
+  }
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+
+  #else /* if !_LZMA_OUT_READ */
+
+  int state = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  int len = 0;
+  const Byte *Buffer;
+  const Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+
+  {
+    UInt32 i;
+    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+    for (i = 0; i < numProbs; i++)
+      p[i] = kBitModelTotal >> 1;
+  }
+  
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+
+  #endif /* _LZMA_OUT_READ */
+
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      if (distanceLimit < dictionarySize)
+        distanceLimit++;
+
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else             
+    {
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+            
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit == 0)
+            #else
+            if (nowPos == 0)
+            #endif
+              return LZMA_RESULT_DATA_ERROR;
+            
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit < dictionarySize)
+              distanceLimit++;
+            #endif
+
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else 
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = kLzmaStreamWasFinishedId;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      #ifdef _LZMA_OUT_READ
+      if (rep0 > distanceLimit) 
+      #else
+      if (rep0 > nowPos)
+      #endif
+        return LZMA_RESULT_DATA_ERROR;
+
+      #ifdef _LZMA_OUT_READ
+      if (dictionarySize - distanceLimit > (UInt32)len)
+        distanceLimit += len;
+      else
+        distanceLimit = dictionarySize;
+      #endif
+
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + (UInt32)nowPos;
+  vs->DistanceLimit = distanceLimit;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  #ifdef _LZMA_IN_CB
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  #else
+  *inSizeProcessed = (SizeT)(Buffer - inStream);
+  #endif
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/bcm63xx/image/lzma-loader/src/LzmaDecode.h
new file mode 100644 (file)
index 0000000..2870eeb
--- /dev/null
@@ -0,0 +1,113 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+#include "LzmaTypes.h"
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb UInt16
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+  int lc;
+  int lp;
+  int pb;
+  #ifdef _LZMA_OUT_READ
+  UInt32 DictionarySize;
+  #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+  CLzmaProperties Properties;
+  CProb *Probs;
+
+  #ifdef _LZMA_IN_CB
+  const unsigned char *Buffer;
+  const unsigned char *BufferLim;
+  #endif
+
+  #ifdef _LZMA_OUT_READ
+  unsigned char *Dictionary;
+  UInt32 Range;
+  UInt32 Code;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 DistanceLimit;
+  UInt32 Reps[4];
+  int State;
+  int RemainLen;
+  unsigned char TempDictionary[4];
+  #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/LzmaTypes.h b/target/linux/bcm63xx/image/lzma-loader/src/LzmaTypes.h
new file mode 100644 (file)
index 0000000..9c27290
--- /dev/null
@@ -0,0 +1,45 @@
+/* 
+LzmaTypes.h 
+
+Types for LZMA Decoder
+
+This file written and distributed to public domain by Igor Pavlov.
+This file is part of LZMA SDK 4.40 (2006-05-01)
+*/
+
+#ifndef __LZMATYPES_H
+#define __LZMATYPES_H
+
+#ifndef _7ZIP_BYTE_DEFINED
+#define _7ZIP_BYTE_DEFINED
+typedef unsigned char Byte;
+#endif 
+
+#ifndef _7ZIP_UINT16_DEFINED
+#define _7ZIP_UINT16_DEFINED
+typedef unsigned short UInt16;
+#endif 
+
+#ifndef _7ZIP_UINT32_DEFINED
+#define _7ZIP_UINT32_DEFINED
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef unsigned long UInt32;
+#else
+typedef unsigned int UInt32;
+#endif
+#endif 
+
+/* #define _LZMA_NO_SYSTEM_SIZE_T */
+/* You can use it, if you don't want <stddef.h> */
+
+#ifndef _7ZIP_SIZET_DEFINED
+#define _7ZIP_SIZET_DEFINED
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+#include <stddef.h>
+typedef size_t SizeT;
+#endif
+#endif
+
+#endif
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/Makefile b/target/linux/bcm63xx/image/lzma-loader/src/Makefile
new file mode 100644 (file)
index 0000000..167bf64
--- /dev/null
@@ -0,0 +1,87 @@
+#
+# Makefile for the LZMA compressed kernel loader for
+# Atheros AR7XXX/AR9XXX based boards
+#
+# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+#
+# Some parts of this file was based on the OpenWrt specific lzma-loader
+# for the BCM47xx and ADM5120 based boards:
+#      Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+#      Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
+#      Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+
+LOADADDR       :=
+LZMA_TEXT_START        := 0x80a00000
+LOADER_DATA    :=
+
+CC             := $(CROSS_COMPILE)gcc
+LD             := $(CROSS_COMPILE)ld
+OBJCOPY                := $(CROSS_COMPILE)objcopy
+OBJDUMP                := $(CROSS_COMPILE)objdump
+
+BIN_FLAGS      := -O binary -R .reginfo -R .note -R .comment -R .mdebug \
+                  -R .MIPS.abiflags -S
+
+CFLAGS         = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+                 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
+                 -mno-abicalls -fno-pic -ffunction-sections -pipe \
+                 -ffreestanding -fhonour-copts \
+                 -mabi=32 -march=mips32 \
+                 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS         += -D_LZMA_PROB32
+
+ASFLAGS                = $(CFLAGS) -D__ASSEMBLY__
+
+LDFLAGS                = -static --gc-sections -no-warn-mismatch
+LDFLAGS                += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
+
+O_FORMAT       = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+OBJECTS                := head.o loader.o cache.o board.o printf.o LzmaDecode.o
+
+ifneq ($(strip $(LOADER_DATA)),)
+OBJECTS                += data.o
+CFLAGS         += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
+endif
+
+
+all: loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+%.o : %.c
+       $(CC) $(CFLAGS) -c -o $@ $<
+
+%.o : %.S
+       $(CC) $(ASFLAGS) -c -o $@ $<
+
+data.o: $(LOADER_DATA)
+       $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
+
+loader: $(OBJECTS)
+       $(LD) $(LDFLAGS) -o $@ $(OBJECTS)
+
+loader.bin: loader
+       $(OBJCOPY) $(BIN_FLAGS) $< $@
+
+loader2.o: loader.bin
+       $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
+
+loader.elf: loader2.o
+       $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
+
+mrproper: clean
+
+clean:
+       rm -f loader *.elf *.bin *.o
+
+
+
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/board.c b/target/linux/bcm63xx/image/lzma-loader/src/board.c
new file mode 100644 (file)
index 0000000..6a1b132
--- /dev/null
@@ -0,0 +1,111 @@
+/*
+ * BCM63XX specific implementation parts
+ *
+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <stddef.h>
+#include "config.h"
+#include "cp0regdef.h"
+
+#define READREG(r)     *(volatile unsigned int *)(r)
+#define WRITEREG(r,v)  *(volatile unsigned int *)(r) = v
+
+#define UART_IR_REG    0x10
+#define UART_FIFO_REG  0x14
+
+unsigned long uart_base;
+
+static void wait_xfered(void)
+{
+        unsigned int val;
+
+        do {
+                val = READREG(uart_base + UART_IR_REG);
+                if (val & (1 << 5))
+                        break;
+        } while (1);
+}
+
+void board_putc(int ch)
+{
+       if (!uart_base)
+               return;
+
+       wait_xfered();
+        WRITEREG(uart_base + UART_FIFO_REG, ch);
+       wait_xfered();
+}
+
+#define PRID_IMP_BMIPS32_REV4  0x4000
+#define PRID_IMP_BMIPS32_REV8  0x8000
+#define PRID_IMP_BMIPS3300     0x9000
+#define PRID_IMP_BMIPS3300_ALT 0x9100
+#define PRID_IMP_BMIPS3300_BUG 0x0000
+#define PRID_IMP_BMIPS43XX     0xa000
+
+void board_init(void)
+{
+       unsigned long prid, chipid, chipid_reg;
+
+       prid = read_32bit_c0_register($15, 0);
+
+       switch (prid & 0xff00) {
+       case PRID_IMP_BMIPS32_REV4:
+       case PRID_IMP_BMIPS32_REV8:
+       case PRID_IMP_BMIPS3300_ALT:
+       case PRID_IMP_BMIPS3300_BUG:
+               chipid_reg = 0xfffe0000;
+               break;
+       case PRID_IMP_BMIPS3300:
+               if ((prid & 0xff) >= 0x33)
+                       chipid_reg = 0xb0000000;
+               else
+                       chipid_reg = 0xfffe0000;
+               break;
+       case PRID_IMP_BMIPS43XX:
+               if ((prid & 0xff) == 0x04)
+                       chipid_reg = 0xfff8c000;
+               else if ((prid & 0xff) == 0x70)
+                       return; /* FIXME: 0002a070 can be 6362 and 3380 */
+               else if ((prid & 0xff) >= 0x30)
+                       chipid_reg = 0xb0000000;
+               else
+                       chipid_reg = 0xfffe0000;
+               break;
+       default:
+               return;
+       }
+
+       chipid = READREG(chipid_reg);
+
+       switch (chipid >> 16) {
+       case 0x3368:
+       case 0x6318:
+       case 0x6328:
+       case 0x6358:
+       case 0x6362:
+       case 0x6368:
+       case 0x6369:
+               uart_base = chipid_reg + 0x100;
+               break;
+       case 0x6316:
+       case 0x6326:
+               uart_base = chipid_reg + 0x180;
+               break;
+       case 0x3380:
+               uart_base = chipid_reg + 0x200;
+               break;
+       case 0x6338:
+       case 0x6345:
+       case 0x6348:
+               uart_base = chipid_reg + 0x300;
+               break;
+       default:
+               return;
+       }
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/cache.c b/target/linux/bcm63xx/image/lzma-loader/src/cache.c
new file mode 100644 (file)
index 0000000..93751c3
--- /dev/null
@@ -0,0 +1,46 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * The cache manipulation routine has been taken from the U-Boot project.
+ *     (C) Copyright 2003
+ *     Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include "cache.h"
+#include "cacheops.h"
+#include "config.h"
+#include "printf.h"
+
+#define cache_op(op,addr)                                              \
+       __asm__ __volatile__(                                           \
+       "       .set    push                                    \n"     \
+       "       .set    noreorder                               \n"     \
+       "       .set    mips3\n\t                               \n"     \
+       "       cache   %0, %1                                  \n"     \
+       "       .set    pop                                     \n"     \
+       :                                                               \
+       : "i" (op), "R" (*(unsigned char *)(addr)))
+
+void flush_cache(unsigned long start_addr, unsigned long size)
+{
+       unsigned long lsize = CONFIG_CACHELINE_SIZE;
+       unsigned long addr = start_addr & ~(lsize - 1);
+       unsigned long aend = (start_addr + size + (lsize - 1)) & ~(lsize - 1);
+
+       printf("blasting from 0x%08x to 0x%08x (0x%08x - 0x%08x)\n", start_addr, size, addr, aend);
+
+       while (1) {
+               cache_op(Hit_Writeback_Inv_D, addr);
+               cache_op(Hit_Invalidate_I, addr);
+               if (addr == aend)
+                       break;
+               addr += lsize;
+       }
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/cache.h b/target/linux/bcm63xx/image/lzma-loader/src/cache.h
new file mode 100644 (file)
index 0000000..506a235
--- /dev/null
@@ -0,0 +1,17 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef __CACHE_H
+#define __CACHE_H
+
+void flush_cache(unsigned long start_addr, unsigned long size);
+
+#endif /* __CACHE_H */
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/cacheops.h b/target/linux/bcm63xx/image/lzma-loader/src/cacheops.h
new file mode 100644 (file)
index 0000000..70bcad7
--- /dev/null
@@ -0,0 +1,85 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef        __ASM_CACHEOPS_H
+#define        __ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I      0x00
+#define Index_Writeback_Inv_D   0x01
+#define Index_Load_Tag_I       0x04
+#define Index_Load_Tag_D       0x05
+#define Index_Store_Tag_I      0x08
+#define Index_Store_Tag_D      0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I       0x00
+#else
+#define Hit_Invalidate_I       0x10
+#endif
+#define Hit_Invalidate_D       0x11
+#define Hit_Writeback_Inv_D    0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D    0x0d
+#define Fill                   0x14
+#define Hit_Writeback_I                0x18
+#define Hit_Writeback_D                0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI     0x02
+#define Index_Writeback_Inv_SD  0x03
+#define Index_Load_Tag_SI      0x06
+#define Index_Load_Tag_SD      0x07
+#define Index_Store_Tag_SI     0x0A
+#define Index_Store_Tag_SD     0x0B
+#define Create_Dirty_Excl_SD   0x0f
+#define Hit_Invalidate_SI      0x12
+#define Hit_Invalidate_SD      0x13
+#define Hit_Writeback_Inv_SD   0x17
+#define Hit_Writeback_SD       0x1b
+#define Hit_Set_Virtual_SI     0x1e
+#define Hit_Set_Virtual_SD     0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S  0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T      0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S  0x03
+#define Index_Load_Tag_S       0x07
+#define Index_Store_Tag_S      0x0B
+#define Hit_Invalidate_S       0x13
+#define Cache_Barrier          0x14
+#define Hit_Writeback_Inv_S    0x17
+#define Index_Load_Data_I      0x18
+#define Index_Load_Data_D      0x19
+#define Index_Load_Data_S      0x1b
+#define Index_Store_Data_I     0x1c
+#define Index_Store_Data_D     0x1d
+#define Index_Store_Data_S     0x1f
+
+#endif /* __ASM_CACHEOPS_H */
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/config.h b/target/linux/bcm63xx/image/lzma-loader/src/config.h
new file mode 100644 (file)
index 0000000..ce391f8
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+#define CONFIG_ICACHE_SIZE     (32 * 1024)
+#define CONFIG_DCACHE_SIZE     (32 * 1024)
+#define CONFIG_CACHELINE_SIZE  16
+
+#ifndef CONFIG_FLASH_OFFS
+#define CONFIG_FLASH_OFFS      0
+#endif
+
+#ifndef CONFIG_FLASH_MAX
+#define CONFIG_FLASH_MAX       0
+#endif
+
+#ifndef CONFIG_FLASH_STEP
+#define CONFIG_FLASH_STEP      0x1000
+#endif
+
+#endif /* _CONFIG_H_ */
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/cp0regdef.h b/target/linux/bcm63xx/image/lzma-loader/src/cp0regdef.h
new file mode 100644 (file)
index 0000000..0d824f4
--- /dev/null
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ *
+ * Copyright (C) 2001, Monta Vista Software
+ * Author: jsun@mvista.com or jsun@junsun.net
+ */
+#ifndef _cp0regdef_h_
+#define _cp0regdef_h_
+
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+
+#define read_32bit_c0_register(reg,sel)                                        \
+({     int __res;                                                      \
+       if (sel == 0)                                                   \
+               __asm__ __volatile__(                                   \
+                       "mfc0\t%0, " #reg "\n\t"                        \
+                       : "=r" (__res));                                \
+       else                                                            \
+               __asm__ __volatile__(                                   \
+                       ".set\tmips32\n\t"                              \
+                       "mfc0\t%0, " #reg ", " #sel "\n\t"              \
+                       ".set mips0\n\t"                                \
+                       : "=r" (__res));                                \
+       __res;                                                          \
+})
+
+#endif
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/head.S b/target/linux/bcm63xx/image/lzma-loader/src/head.S
new file mode 100644 (file)
index 0000000..47a7c9b
--- /dev/null
@@ -0,0 +1,121 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *     Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *     Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "cp0regdef.h"
+#include "cacheops.h"
+#include "config.h"
+
+#define KSEG0          0x80000000
+
+       .macro  ehb
+       sll     zero, 3
+       .endm
+
+       .text
+
+LEAF(startup)
+       .set noreorder
+       .set mips32
+
+       mtc0    zero, CP0_WATCHLO       # clear watch registers
+       mtc0    zero, CP0_WATCHHI
+       mtc0    zero, CP0_CAUSE         # clear before writing status register
+
+       mfc0    t0, CP0_STATUS
+       li      t1, 0x1000001f
+       or      t0, t1
+       xori    t0, 0x1f
+       mtc0    t0, CP0_STATUS
+       ehb
+
+       mtc0    zero, CP0_COUNT
+       mtc0    zero, CP0_COMPARE
+       ehb
+
+       la      t0, __reloc_label       # get linked address of label
+       bal     __reloc_label           # branch and link to label to
+       nop                             # get actual address
+__reloc_label:
+       subu    t0, ra, t0              # get reloc_delta
+
+       beqz    t0, __reloc_done         # if delta is 0 we are in the right place
+       nop
+
+       /* Copy our code to the right place */
+       la      t1, _code_start         # get linked address of _code_start
+       la      t2, _code_end           # get linked address of _code_end
+       addu    t0, t0, t1              # calculate actual address of _code_start
+
+__reloc_copy:
+       lw      t3, 0(t0)
+       sw      t3, 0(t1)
+       add     t1, 4
+       blt     t1, t2, __reloc_copy
+       add     t0, 4
+
+       /* flush cache */
+       la      t0, _code_start
+       la      t1, _code_end
+
+       li      t2, ~(CONFIG_CACHELINE_SIZE - 1)
+       and     t0, t2
+       and     t1, t2
+       li      t2, CONFIG_CACHELINE_SIZE
+
+       b       __flush_check
+       nop
+
+__flush_line:
+       cache   Hit_Writeback_Inv_D, 0(t0)
+       cache   Hit_Invalidate_I, 0(t0)
+       add     t0, t2
+
+__flush_check:
+       bne     t0, t1, __flush_line
+       nop
+
+       sync
+
+__reloc_done:
+
+       /* clear bss */
+       la      t0, _bss_start
+       la      t1, _bss_end
+       b       __bss_check
+       nop
+
+__bss_fill:
+       sw      zero, 0(t0)
+       addi    t0, 4
+
+__bss_check:
+       bne     t0, t1, __bss_fill
+       nop
+
+       /* Setup new "C" stack */
+       la      sp, _stack
+
+       /* reserve stack space for a0-a3 registers */
+       subu    sp, 16
+
+       /* jump to the decompressor routine */
+       la      t0, loader_main
+       jr      t0
+       nop
+
+       .set reorder
+END(startup)
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/loader.c b/target/linux/bcm63xx/image/lzma-loader/src/loader.c
new file mode 100644 (file)
index 0000000..0848ce6
--- /dev/null
@@ -0,0 +1,175 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *     Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *     Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
+ *     Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * The image_header structure has been taken from the U-Boot project.
+ *     (C) Copyright 2008 Semihalf
+ *     (C) Copyright 2000-2005
+ *     Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "config.h"
+#include "cache.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define KSEG0                  0x80000000
+#define KSEG1                  0xa0000000
+
+#define KSEG1ADDR(a)           ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#undef LZMA_DEBUG
+
+#ifdef LZMA_DEBUG
+#  define DBG(f, a...) printf(f, ## a)
+#else
+#  define DBG(f, a...) do {} while (0)
+#endif
+
+/* beyond the image end, size not known in advance */
+extern unsigned char workspace[];
+
+
+extern void board_init(void);
+
+static CLzmaDecoderState lzma_state;
+static unsigned char *lzma_data;
+static unsigned long lzma_datasize;
+static unsigned long lzma_outsize;
+static unsigned long kernel_la;
+
+static void halt(void)
+{
+       printf("\nSystem halted!\n");
+       for(;;);
+}
+
+static __inline__ unsigned char lzma_get_byte(void)
+{
+       unsigned char c;
+
+       lzma_datasize--;
+       c = *lzma_data++;
+
+       return c;
+}
+
+static int lzma_init_props(void)
+{
+       unsigned char props[LZMA_PROPERTIES_SIZE];
+       int res;
+       int i;
+
+       /* read lzma properties */
+       for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
+               props[i] = lzma_get_byte();
+
+       /* read the lower half of uncompressed size in the header */
+       lzma_outsize = ((SizeT) lzma_get_byte()) +
+                      ((SizeT) lzma_get_byte() << 8) +
+                      ((SizeT) lzma_get_byte() << 16) +
+                      ((SizeT) lzma_get_byte() << 24);
+
+       /* skip rest of the header (upper half of uncompressed size) */
+       for (i = 0; i < 4; i++)
+               lzma_get_byte();
+
+       res = LzmaDecodeProperties(&lzma_state.Properties, props,
+                                       LZMA_PROPERTIES_SIZE);
+       return res;
+}
+
+static int lzma_decompress(unsigned char *outStream)
+{
+       SizeT ip, op;
+       int ret;
+
+       lzma_state.Probs = (CProb *) workspace;
+
+       ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
+                        lzma_outsize, &op);
+
+       if (ret != LZMA_RESULT_OK) {
+               int i;
+
+               DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
+                   ret, lzma_data + ip, lzma_outsize, ip, op);
+
+               for (i = 0; i < 16; i++)
+                       DBG("%02x ", lzma_data[ip + i]);
+
+               DBG("\n");
+       }
+
+       return ret;
+}
+
+static void lzma_init_data(void)
+{
+       extern unsigned char _lzma_data_start[];
+       extern unsigned char _lzma_data_end[];
+
+       kernel_la = LOADADDR;
+       lzma_data = _lzma_data_start;
+       lzma_datasize = _lzma_data_end - _lzma_data_start;
+}
+
+void loader_main(unsigned long reg_a0, unsigned long reg_a1,
+                unsigned long reg_a2, unsigned long reg_a3)
+{
+       void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
+                             unsigned long);
+       int res;
+
+       board_init();
+
+       printf("\n\nOpenWrt kernel loader for BCM63XX\n");
+       printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
+       printf("Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>\n");
+
+       lzma_init_data();
+
+       res = lzma_init_props();
+       if (res != LZMA_RESULT_OK) {
+               printf("Incorrect LZMA stream properties!\n");
+               halt();
+       }
+
+       printf("Decompressing kernel... ");
+
+       res = lzma_decompress((unsigned char *) kernel_la);
+       if (res != LZMA_RESULT_OK) {
+               printf("failed, ");
+               switch (res) {
+               case LZMA_RESULT_DATA_ERROR:
+                       printf("data error!\n");
+                       break;
+               default:
+                       printf("unknown error %d!\n", res);
+               }
+               halt();
+       } else {
+               printf("done!\n");
+       }
+
+       flush_cache(kernel_la, lzma_outsize);
+
+       printf("Starting kernel at %08x...\n\n", kernel_la);
+
+       kernel_entry = (void *) kernel_la;
+       kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/loader.lds b/target/linux/bcm63xx/image/lzma-loader/src/loader.lds
new file mode 100644 (file)
index 0000000..01ff852
--- /dev/null
@@ -0,0 +1,34 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+       .text : {
+               _code_start = .;
+               *(.text)
+               *(.text.*)
+               *(.rodata)
+               *(.rodata.*)
+               *(.data.lzma)
+       }
+
+       . = ALIGN(32);
+       .data : {
+               *(.data)
+               *(.data.*)
+       }
+
+       . = ALIGN(32);
+       _code_end = .;
+
+       _bss_start = .;
+       .bss : {
+               *(.bss)
+               *(.bss.*)
+       }
+
+       . = ALIGN(32);
+       _bss_end = .;
+
+       . = . + 8192;
+       _stack = .;
+
+       workspace = .;
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/loader2.lds b/target/linux/bcm63xx/image/lzma-loader/src/loader2.lds
new file mode 100644 (file)
index 0000000..db0bb46
--- /dev/null
@@ -0,0 +1,10 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+       .text : {
+               startup = .;
+               *(.text)
+               *(.text.*)
+               *(.data)
+               *(.data.*)
+       }
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/lzma-data.lds b/target/linux/bcm63xx/image/lzma-loader/src/lzma-data.lds
new file mode 100644 (file)
index 0000000..abf756b
--- /dev/null
@@ -0,0 +1,8 @@
+OUTPUT_ARCH(mips)
+SECTIONS {
+       .data.lzma : {
+               _lzma_data_start = .;
+               *(.data)
+               _lzma_data_end = .;
+       }
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/printf.c b/target/linux/bcm63xx/image/lzma-loader/src/printf.c
new file mode 100644 (file)
index 0000000..7bb5a86
--- /dev/null
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include       "printf.h"
+
+extern void board_putc(int ch);
+
+/* this is the maximum width for a variable */
+#define                LP_MAX_BUF      256
+
+/* macros */
+#define                IsDigit(x)      ( ((x) >= '0') && ((x) <= '9') )
+#define                Ctod(x)         ( (x) - '0')
+
+/* forward declaration */
+static int PrintChar(char *, char, int, int);
+static int PrintString(char *, char *, int, int);
+static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+static void
+lp_Print(void (*output)(void *, char *, int),
+        void * arg,
+        char *fmt,
+        va_list ap)
+{
+
+#define        OUTPUT(arg, s, l)  \
+  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+    } else { \
+      (*output)(arg, s, l); \
+    } \
+  }
+
+    char buf[LP_MAX_BUF];
+
+    char c;
+    char *s;
+    long int num;
+
+    int longFlag;
+    int negFlag;
+    int width;
+    int prec;
+    int ladjust;
+    char padc;
+
+    int length;
+
+    for(;;) {
+       {
+           /* scan for the next '%' */
+           char *fmtStart = fmt;
+           while ( (*fmt != '\0') && (*fmt != '%')) {
+               fmt ++;
+           }
+
+           /* flush the string found so far */
+           OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+           /* are we hitting the end? */
+           if (*fmt == '\0') break;
+       }
+
+       /* we found a '%' */
+       fmt ++;
+
+       /* check for long */
+       if (*fmt == 'l') {
+           longFlag = 1;
+           fmt ++;
+       } else {
+           longFlag = 0;
+       }
+
+       /* check for other prefixes */
+       width = 0;
+       prec = -1;
+       ladjust = 0;
+       padc = ' ';
+
+       if (*fmt == '-') {
+           ladjust = 1;
+           fmt ++;
+       }
+
+       if (*fmt == '0') {
+           padc = '0';
+           fmt++;
+       }
+
+       if (IsDigit(*fmt)) {
+           while (IsDigit(*fmt)) {
+               width = 10 * width + Ctod(*fmt++);
+           }
+       }
+
+       if (*fmt == '.') {
+           fmt ++;
+           if (IsDigit(*fmt)) {
+               prec = 0;
+               while (IsDigit(*fmt)) {
+                   prec = prec*10 + Ctod(*fmt++);
+               }
+           }
+       }
+
+
+       /* check format flag */
+       negFlag = 0;
+       switch (*fmt) {
+        case 'b':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'd':
+        case 'D':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           if (num < 0) {
+               num = - num;
+               negFlag = 1;
+           }
+           length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'o':
+        case 'O':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'u':
+        case 'U':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'x':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'X':
+           if (longFlag) {
+               num = va_arg(ap, long int);
+           } else {
+               num = va_arg(ap, int);
+           }
+           length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 'c':
+           c = (char)va_arg(ap, int);
+           length = PrintChar(buf, c, width, ladjust);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case 's':
+           s = (char*)va_arg(ap, char *);
+           length = PrintString(buf, s, width, ladjust);
+           OUTPUT(arg, buf, length);
+           break;
+
+        case '\0':
+           fmt --;
+           break;
+
+        default:
+           /* output this char as it is */
+           OUTPUT(arg, fmt, 1);
+       }       /* switch (*fmt) */
+
+       fmt ++;
+    }          /* for(;;) */
+
+    /* special termination call */
+    OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+static int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+    int i;
+
+    if (length < 1) length = 1;
+    if (ladjust) {
+       *buf = c;
+       for (i=1; i< length; i++) buf[i] = ' ';
+    } else {
+       for (i=0; i< length-1; i++) buf[i] = ' ';
+       buf[length - 1] = c;
+    }
+    return length;
+}
+
+static int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+    int i;
+    int len=0;
+    char* s1 = s;
+    while (*s1++) len++;
+    if (length < len) length = len;
+
+    if (ladjust) {
+       for (i=0; i< len; i++) buf[i] = s[i];
+       for (i=len; i< length; i++) buf[i] = ' ';
+    } else {
+       for (i=0; i< length-len; i++) buf[i] = ' ';
+       for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+    }
+    return length;
+}
+
+static int
+PrintNum(char * buf, unsigned long u, int base, int negFlag,
+        int length, int ladjust, char padc, int upcase)
+{
+    /* algorithm :
+     *  1. prints the number from left to right in reverse form.
+     *  2. fill the remaining spaces with padc if length is longer than
+     *     the actual length
+     *     TRICKY : if left adjusted, no "0" padding.
+     *             if negtive, insert  "0" padding between "0" and number.
+     *  3. if (!ladjust) we reverse the whole string including paddings
+     *  4. otherwise we only reverse the actual string representing the num.
+     */
+
+    int actualLength =0;
+    char *p = buf;
+    int i;
+
+    do {
+       int tmp = u %base;
+       if (tmp <= 9) {
+           *p++ = '0' + tmp;
+       } else if (upcase) {
+           *p++ = 'A' + tmp - 10;
+       } else {
+           *p++ = 'a' + tmp - 10;
+       }
+       u /= base;
+    } while (u != 0);
+
+    if (negFlag) {
+       *p++ = '-';
+    }
+
+    /* figure out actual length and adjust the maximum length */
+    actualLength = p - buf;
+    if (length < actualLength) length = actualLength;
+
+    /* add padding */
+    if (ladjust) {
+       padc = ' ';
+    }
+    if (negFlag && !ladjust && (padc == '0')) {
+       for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+       buf[length -1] = '-';
+    } else {
+       for (i = actualLength; i< length; i++) buf[i] = padc;
+    }
+
+
+    /* prepare to reverse the string */
+    {
+       int begin = 0;
+       int end;
+       if (ladjust) {
+           end = actualLength - 1;
+       } else {
+           end = length -1;
+       }
+
+       while (end > begin) {
+           char tmp = buf[begin];
+           buf[begin] = buf[end];
+           buf[end] = tmp;
+           begin ++;
+           end --;
+       }
+    }
+
+    /* adjust the string pointer */
+    return length;
+}
+
+static void printf_output(void *arg, char *s, int l)
+{
+    int i;
+
+    // special termination call
+    if ((l==1) && (s[0] == '\0')) return;
+
+    for (i=0; i< l; i++) {
+       board_putc(s[i]);
+       if (s[i] == '\n') board_putc('\r');
+    }
+}
+
+void printf(char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    lp_Print(printf_output, 0, fmt, ap);
+    va_end(ap);
+}
diff --git a/target/linux/bcm63xx/image/lzma-loader/src/printf.h b/target/linux/bcm63xx/image/lzma-loader/src/printf.h
new file mode 100644 (file)
index 0000000..9b1c1df
--- /dev/null
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */
diff --git a/target/linux/bcm63xx/modules.mk b/target/linux/bcm63xx/modules.mk
new file mode 100644 (file)
index 0000000..bc244c8
--- /dev/null
@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define KernelPackage/pcmcia-bcm63xx
+  SUBMENU:=$(PCMCIA_MENU)
+  TITLE:=Broadcom BCM63xx PCMCIA support
+  DEPENDS:=@TARGET_bcm63xx +kmod-pcmcia-rsrc
+  KCONFIG:=CONFIG_PCMCIA_BCM63XX
+  FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.ko
+  AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
+endef
+
+define KernelPackage/pcmcia-bcm63xx/description
+  Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
+endef
+
+$(eval $(call KernelPackage,pcmcia-bcm63xx))
+
+define KernelPackage/bcm63xx-udc
+  SUBMENU:=$(USB_MENU)
+  TITLE:=Broadcom BCM63xx UDC support
+  DEPENDS:=@TARGET_bcm63xx +kmod-usb-gadget
+  KCONFIG:=CONFIG_USB_BCM63XX_UDC
+  FILES:= \
+       $(LINUX_DIR)/drivers/usb/gadget/udc/bcm63xx_udc.ko
+  AUTOLOAD:=$(call AutoLoad,51,bcm63xx_udc)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/bcm63xx-udc/description
+  Kernel support for the USB gadget (device) controller on the BCM63xx SoC
+endef
+
+$(eval $(call KernelPackage,bcm63xx-udc))
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch
new file mode 100644 (file)
index 0000000..b6d755d
--- /dev/null
@@ -0,0 +1,210 @@
+From e74caf41aec5338b8cbbd0a1483650848f16f532 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:23:47 +0200
+Subject: [PATCH V2 1/8] MIPS: BCM63XX: add clkdev lookup support
+
+Enable clkdev lookup support to allow us providing clocks under
+different names to devices more easily, so we don't need to care
+about clock name clashes anymore.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/Kconfig       |   1 +
+ arch/mips/bcm63xx/clk.c | 150 +++++++++++++++++++++++++++++++++++++-----------
+ 2 files changed, 116 insertions(+), 35 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -279,6 +279,7 @@ config BCM63XX
+       select GPIOLIB
+       select HAVE_CLK
+       select MIPS_L1_CACHE_SHIFT_4
++      select CLKDEV_LOOKUP
+       help
+        Support for BCM63XX based boards
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -11,6 +11,7 @@
+ #include <linux/mutex.h>
+ #include <linux/err.h>
+ #include <linux/clk.h>
++#include <linux/clkdev.h>
+ #include <linux/delay.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_io.h>
+@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns
+ }
+ EXPORT_SYMBOL_GPL(clk_round_rate);
+-struct clk *clk_get(struct device *dev, const char *id)
+-{
+-      if (!strcmp(id, "enet0"))
+-              return &clk_enet0;
+-      if (!strcmp(id, "enet1"))
+-              return &clk_enet1;
+-      if (!strcmp(id, "enetsw"))
+-              return &clk_enetsw;
+-      if (!strcmp(id, "ephy"))
+-              return &clk_ephy;
+-      if (!strcmp(id, "usbh"))
+-              return &clk_usbh;
+-      if (!strcmp(id, "usbd"))
+-              return &clk_usbd;
+-      if (!strcmp(id, "spi"))
+-              return &clk_spi;
+-      if (!strcmp(id, "hsspi"))
+-              return &clk_hsspi;
+-      if (!strcmp(id, "xtm"))
+-              return &clk_xtm;
+-      if (!strcmp(id, "periph"))
+-              return &clk_periph;
+-      if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
+-              return &clk_pcm;
+-      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
+-              return &clk_ipsec;
+-      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
+-              return &clk_pcie;
+-      return ERR_PTR(-ENOENT);
+-}
+-
+-EXPORT_SYMBOL(clk_get);
+-
+-void clk_put(struct clk *clk)
+-{
+-}
+-
+-EXPORT_SYMBOL(clk_put);
++static struct clk_lookup bcm3368_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
++      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
++      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
++};
++
++static struct clk_lookup bcm6328_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++};
++
++static struct clk_lookup bcm6338_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
++      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
++      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++};
++
++static struct clk_lookup bcm6345_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
++      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
++      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++};
++
++static struct clk_lookup bcm6348_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
++      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
++      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++};
++
++static struct clk_lookup bcm6358_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
++      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
++      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
++};
++
++static struct clk_lookup bcm6362_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
++};
++
++static struct clk_lookup bcm6368_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "xtm", &clk_xtm),
++      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
++};
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put);
+ static int __init bcm63xx_clk_init(void)
+ {
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM3368_CPU_ID:
++              clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
++              break;
+       case BCM6328_CPU_ID:
+               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
++              clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
++              break;
++      case BCM6338_CPU_ID:
++              clkdev_add_table(bcm6338_clks, ARRAY_SIZE(bcm6338_clks));
++              break;
++      case BCM6345_CPU_ID:
++              clkdev_add_table(bcm6345_clks, ARRAY_SIZE(bcm6345_clks));
++              break;
++      case BCM6348_CPU_ID:
++              clkdev_add_table(bcm6348_clks, ARRAY_SIZE(bcm6348_clks));
++              break;
++      case BCM6358_CPU_ID:
++              clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
+               break;
+       case BCM6362_CPU_ID:
+               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
++              clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
++              break;
++      case BCM6368_CPU_ID:
++              clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
+               break;
+       }
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch
new file mode 100644 (file)
index 0000000..2be6f4c
--- /dev/null
@@ -0,0 +1,84 @@
+From d0322bf7bebe87012b4f95c85be6b5ba0cb6f344 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:31:44 +0200
+Subject: [PATCH V2 2/8] MIPS: BCM63XX: provide periph clock as refclk for uart
+
+Add a lookup as "refclk" to describe its function for the uarts.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
+ static struct clk_lookup bcm3368_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[]
+ static struct clk_lookup bcm6328_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[]
+ static struct clk_lookup bcm6338_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[]
+ static struct clk_lookup bcm6345_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[]
+ static struct clk_lookup bcm6348_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[]
+ static struct clk_lookup bcm6358_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[]
+ static struct clk_lookup bcm6362_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[]
+ static struct clk_lookup bcm6368_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch
new file mode 100644 (file)
index 0000000..986732e
--- /dev/null
@@ -0,0 +1,26 @@
+From 8124706e6040b1cf0d2dd3a05759df6cec4bddfb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:32:37 +0200
+Subject: [PATCH V2 3/8] tty/bcm63xx_uart: use refclk for the expected clock
+ name
+
+We now have the clock available under refclk, so use that.
+
+Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/tty/serial/bcm63xx_uart.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/tty/serial/bcm63xx_uart.c
++++ b/drivers/tty/serial/bcm63xx_uart.c
+@@ -847,7 +847,7 @@ static int bcm_uart_probe(struct platfor
+               return -ENODEV;
+       clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
+-                                clk_get(&pdev->dev, "periph");
++                                clk_get(&pdev->dev, "refclk");
+       if (IS_ERR(clk))
+               return -ENODEV;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch
new file mode 100644 (file)
index 0000000..2f82830
--- /dev/null
@@ -0,0 +1,55 @@
+From 317f8659bba01b307cbe4e9902d4e3d333fd7164 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:39:17 +0200
+Subject: [PATCH V2 4/8] tty/bcm63xx_uart: allow naming clock in device tree
+
+Codify using a named clock for the refclk of the uart. This makes it
+easier if we might need to add a gating clock (like present on the
+BCM6345).
+
+Acked-by: Rob Herring <robh@kernel.org>
+Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++
+ drivers/tty/serial/bcm63xx_uart.c                              | 6 ++++--
+ 2 files changed, 10 insertions(+), 2 deletions(-)
+
+--- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
++++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
+@@ -11,6 +11,11 @@ Required properties:
+ - clocks: Clock driving the hardware; used to figure out the baud rate
+   divisor.
++
++Optional properties:
++
++- clock-names: Should be "refclk".
++
+ Example:
+       uart0: serial@14e00520 {
+@@ -19,6 +24,7 @@ Example:
+               interrupt-parent = <&periph_intc>;
+               interrupts = <2>;
+               clocks = <&periph_clk>;
++              clock-names = "refclk";
+       };
+       clocks {
+--- a/drivers/tty/serial/bcm63xx_uart.c
++++ b/drivers/tty/serial/bcm63xx_uart.c
+@@ -846,8 +846,10 @@ static int bcm_uart_probe(struct platfor
+       if (!res_irq)
+               return -ENODEV;
+-      clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
+-                                clk_get(&pdev->dev, "refclk");
++      clk = clk_get(&pdev->dev, "refclk");
++      if (IS_ERR(clk) && pdev->dev.of_node)
++              clk = of_clk_get(pdev->dev.of_node, 0);
++
+       if (IS_ERR(clk))
+               return -ENODEV;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch
new file mode 100644 (file)
index 0000000..a69998d
--- /dev/null
@@ -0,0 +1,62 @@
+From cb86630379c8f3432c916d62045b5176f17f4123 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:57:21 +0200
+Subject: [PATCH V2 6/8] MIPS: BCM63XX: move the HSSPI PLL HZ into its own
+ clock
+
+Split up the HSSPL clock into rate and a gate clock, to more closely
+match the actual hardware.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -248,6 +248,10 @@ static struct clk clk_hsspi = {
+       .set    = hsspi_set,
+ };
++/*
++ * HSSPI PLL
++ */
++static struct clk clk_hsspi_pll;
+ /*
+  * XTM clock
+@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void)
+               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
+               break;
+       case BCM6328_CPU_ID:
+-              clk_hsspi.rate = HSSPI_PLL_HZ_6328;
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
+               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
+               break;
+       case BCM6338_CPU_ID:
+@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void)
+               clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
+               break;
+       case BCM6362_CPU_ID:
+-              clk_hsspi.rate = HSSPI_PLL_HZ_6362;
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
+               clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
+               break;
+       case BCM6368_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch
new file mode 100644 (file)
index 0000000..eb30b2d
--- /dev/null
@@ -0,0 +1,60 @@
+From 6d43970a2eb1c7ee88caf7328d201f9c001262e9 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:48:41 +0200
+Subject: [PATCH V2 7/8] MIPS: BCM63XX: provide enet clocks as "enet" to the
+ ethernet devices
+
+Add lookups to provide the appropriate enetX clocks as just "enet" to
+the ethernet devices.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[]
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
+       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
++      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
++      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
+ };
+ static struct clk_lookup bcm6328_clks[] = {
+@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[]
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
+ };
+ static struct clk_lookup bcm6345_clks[] = {
+@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[]
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
+ };
+ static struct clk_lookup bcm6348_clks[] = {
+@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[]
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
++      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet_misc),
+ };
+ static struct clk_lookup bcm6358_clks[] = {
+@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[]
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
+       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
++      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
++      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
+ };
+ static struct clk_lookup bcm6362_clks[] = {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch
new file mode 100644 (file)
index 0000000..b5b36e5
--- /dev/null
@@ -0,0 +1,105 @@
+From b98027285bd1fa95da0645a4234a5fc1f1a83f92 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 26 Feb 2017 11:59:52 +0100
+Subject: [PATCH V2 8/8] MIPS: BCM63XX: split out swpkt_sar/usb clocks
+
+Make the secondary switch clocks their own clocks. This allows proper
+enable reference counting between SAR/XTM and the main switch clocks,
+and controlling them individually from drivers.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c | 61 +++++++++++++++++++++++++++++++++++++++++--------
+ 1 file changed, 51 insertions(+), 10 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -122,21 +122,56 @@ static struct clk clk_ephy = {
+ };
+ /*
++ * Ethernet switch SAR clock
++ */
++static void swpkt_sar_set(struct clk *clk, int enable)
++{
++      if (BCMCPU_IS_6368())
++              bcm_hwclock_set(CKCTL_6368_SWPKT_SAR_EN, enable);
++      else
++              return;
++}
++
++static struct clk clk_swpkt_sar = {
++      .set    = swpkt_sar_set,
++};
++
++/*
++ * Ethernet switch USB clock
++ */
++static void swpkt_usb_set(struct clk *clk, int enable)
++{
++      if (BCMCPU_IS_6368())
++              bcm_hwclock_set(CKCTL_6368_SWPKT_USB_EN, enable);
++      else
++              return;
++}
++
++static struct clk clk_swpkt_usb = {
++      .set    = swpkt_usb_set,
++};
++
++/*
+  * Ethernet switch clock
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
+-      else if (BCMCPU_IS_6368())
+-              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
+-                              CKCTL_6368_SWPKT_USB_EN |
+-                              CKCTL_6368_SWPKT_SAR_EN,
+-                              enable);
+-      else
++      } else if (BCMCPU_IS_6368()) {
++              if (enable) {
++                      clk_enable_unlocked(&clk_swpkt_sar);
++                      clk_enable_unlocked(&clk_swpkt_usb);
++              } else {
++                      clk_disable_unlocked(&clk_swpkt_usb);
++                      clk_disable_unlocked(&clk_swpkt_sar);
++              }
++              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
++      } else {
+               return;
++      }
+       if (enable) {
+               /* reset switch core afer clock change */
+@@ -261,8 +296,12 @@ static void xtm_set(struct clk *clk, int
+       if (!BCMCPU_IS_6368())
+               return;
+-      bcm_hwclock_set(CKCTL_6368_SAR_EN |
+-                      CKCTL_6368_SWPKT_SAR_EN, enable);
++      if (enable)
++              clk_enable_unlocked(&clk_swpkt_sar);
++      else
++              clk_disable_unlocked(&clk_swpkt_sar);
++
++      bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
+       if (enable) {
+               /* reset sar core afer clock change */
+@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[]
+       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
+       CLKDEV_INIT(NULL, "spi", &clk_spi),
+       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
++      CLKDEV_INIT(NULL, "swpkt_sar", &clk_swpkt_sar),
++      CLKDEV_INIT(NULL, "swpkt_usb", &clk_swpkt_usb),
+       CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
+       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
+ };
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch
new file mode 100644 (file)
index 0000000..b339580
--- /dev/null
@@ -0,0 +1,41 @@
+From 71710bb6cbc82f411a4e5faafa0c3178e48e7137 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 30 May 2017 13:31:45 +0200
+Subject: [PATCH 3/6] bcm63xx_enet: do not rely on probe order
+
+Do not rely on the shared device being probed before the enet(sw)
+devices. This makes it easier to eventually move out the shared
+device as a dma controller driver (what it should be).
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 ++-------
+ 1 file changed, 2 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1723,10 +1723,8 @@ static int bcm_enet_probe(struct platfor
+       const char *clk_name;
+       int i, ret;
+-      /* stop if shared driver failed, assume driver->probe will be
+-       * called in the same order we register devices (correct ?) */
+       if (!bcm_enet_shared_base[0])
+-              return -ENODEV;
++              return -EPROBE_DEFER;
+       res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+@@ -2701,11 +2699,8 @@ static int bcm_enetsw_probe(struct platf
+       struct resource *res_mem;
+       int ret, irq_rx, irq_tx;
+-      /* stop if shared driver failed, assume driver->probe will be
+-       * called in the same order we register devices (correct ?)
+-       */
+       if (!bcm_enet_shared_base[0])
+-              return -ENODEV;
++              return -EPROBE_DEFER;
+       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       irq_rx = platform_get_irq(pdev, 0);
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch
new file mode 100644 (file)
index 0000000..cf0971c
--- /dev/null
@@ -0,0 +1,150 @@
+From 179a445ae4ef36ec44f4aea18e5f42d21334d186 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sat, 25 Feb 2017 12:39:25 +0100
+Subject: [PATCH 4/6] bcm63xx_enet: use managed functions for clock/ioremap
+
+Use managed functions where possible to reduce the amount of resource
+handling on error and remove paths.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 54 +++++++---------------------
+ 1 file changed, 12 insertions(+), 42 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1768,14 +1768,14 @@ static int bcm_enet_probe(struct platfor
+               clk_name = "enet1";
+       }
+-      priv->mac_clk = clk_get(&pdev->dev, clk_name);
++      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
+       if (IS_ERR(priv->mac_clk)) {
+               ret = PTR_ERR(priv->mac_clk);
+               goto out;
+       }
+       ret = clk_prepare_enable(priv->mac_clk);
+       if (ret)
+-              goto out_put_clk_mac;
++              goto out;
+       /* initialize default and fetch platform data */
+       priv->rx_ring_size = BCMENET_DEF_RX_DESC;
+@@ -1803,7 +1803,7 @@ static int bcm_enet_probe(struct platfor
+       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
+               /* using internal PHY, enable clock */
+-              priv->phy_clk = clk_get(&pdev->dev, "ephy");
++              priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
+               if (IS_ERR(priv->phy_clk)) {
+                       ret = PTR_ERR(priv->phy_clk);
+                       priv->phy_clk = NULL;
+@@ -1811,7 +1811,7 @@ static int bcm_enet_probe(struct platfor
+               }
+               ret = clk_prepare_enable(priv->phy_clk);
+               if (ret)
+-                      goto out_put_clk_phy;
++                      goto out_disable_clk_mac;
+       }
+       /* do minimal hardware init to be able to probe mii bus */
+@@ -1908,14 +1908,8 @@ out_uninit_hw:
+       if (priv->phy_clk)
+               clk_disable_unprepare(priv->phy_clk);
+-out_put_clk_phy:
+-      if (priv->phy_clk)
+-              clk_put(priv->phy_clk);
+-
+ out_disable_clk_mac:
+       clk_disable_unprepare(priv->mac_clk);
+-out_put_clk_mac:
+-      clk_put(priv->mac_clk);
+ out:
+       free_netdev(dev);
+       return ret;
+@@ -1951,12 +1945,10 @@ static int bcm_enet_remove(struct platfo
+       }
+       /* disable hw block clocks */
+-      if (priv->phy_clk) {
++      if (priv->phy_clk)
+               clk_disable_unprepare(priv->phy_clk);
+-              clk_put(priv->phy_clk);
+-      }
++
+       clk_disable_unprepare(priv->mac_clk);
+-      clk_put(priv->mac_clk);
+       free_netdev(dev);
+       return 0;
+@@ -2739,26 +2731,20 @@ static int bcm_enetsw_probe(struct platf
+       if (ret)
+               goto out;
+-      if (!request_mem_region(res_mem->start, resource_size(res_mem),
+-                              "bcm63xx_enetsw")) {
+-              ret = -EBUSY;
++      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
++      if (IS_ERR(priv->base)) {
++              ret = PTR_ERR(priv->base);
+               goto out;
+       }
+-      priv->base = ioremap(res_mem->start, resource_size(res_mem));
+-      if (priv->base == NULL) {
+-              ret = -ENOMEM;
+-              goto out_release_mem;
+-      }
+-
+-      priv->mac_clk = clk_get(&pdev->dev, "enetsw");
++      priv->mac_clk = devm_clk_get(&pdev->dev, "enetsw");
+       if (IS_ERR(priv->mac_clk)) {
+               ret = PTR_ERR(priv->mac_clk);
+-              goto out_unmap;
++              goto out;
+       }
+       ret = clk_prepare_enable(priv->mac_clk);
+       if (ret)
+-              goto out_put_clk;
++              goto out;
+       priv->rx_chan = 0;
+       priv->tx_chan = 1;
+@@ -2790,15 +2776,6 @@ static int bcm_enetsw_probe(struct platf
+ out_disable_clk:
+       clk_disable_unprepare(priv->mac_clk);
+-
+-out_put_clk:
+-      clk_put(priv->mac_clk);
+-
+-out_unmap:
+-      iounmap(priv->base);
+-
+-out_release_mem:
+-      release_mem_region(res_mem->start, resource_size(res_mem));
+ out:
+       free_netdev(dev);
+       return ret;
+@@ -2810,20 +2787,13 @@ static int bcm_enetsw_remove(struct plat
+ {
+       struct bcm_enet_priv *priv;
+       struct net_device *dev;
+-      struct resource *res;
+       /* stop netdevice */
+       dev = platform_get_drvdata(pdev);
+       priv = netdev_priv(dev);
+       unregister_netdev(dev);
+-      /* release device resources */
+-      iounmap(priv->base);
+-      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-      release_mem_region(res->start, resource_size(res));
+-
+       clk_disable_unprepare(priv->mac_clk);
+-      clk_put(priv->mac_clk);
+       free_netdev(dev);
+       return 0;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch
new file mode 100644 (file)
index 0000000..34fdd5c
--- /dev/null
@@ -0,0 +1,36 @@
+From 555baec974ede81e616ca88ac6d3fca09239368f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 18 Jul 2017 13:18:01 +0200
+Subject: [PATCH 5/6] bcm63xx_enet: drop unneeded NULL phy_clk check
+
+clk_disable and clk_unprepare are NULL-safe, so need to duplicate the
+NULL check of the functions.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1905,8 +1905,7 @@ out_free_mdio:
+ out_uninit_hw:
+       /* turn off mdc clock */
+       enet_writel(priv, 0, ENET_MIISC_REG);
+-      if (priv->phy_clk)
+-              clk_disable_unprepare(priv->phy_clk);
++      clk_disable_unprepare(priv->phy_clk);
+ out_disable_clk_mac:
+       clk_disable_unprepare(priv->mac_clk);
+@@ -1945,9 +1944,7 @@ static int bcm_enet_remove(struct platfo
+       }
+       /* disable hw block clocks */
+-      if (priv->phy_clk)
+-              clk_disable_unprepare(priv->phy_clk);
+-
++      clk_disable_unprepare(priv->phy_clk);
+       clk_disable_unprepare(priv->mac_clk);
+       free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch
new file mode 100644 (file)
index 0000000..41a6b57
--- /dev/null
@@ -0,0 +1,22 @@
+From 77364ce98037972fb1c57d0ee0418eb1c2b26521 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 29 May 2017 13:11:14 +0200
+Subject: [PATCH 6/6] bcm63xx_enet: remove unneeded include
+
+We don't use anyhing from that file, so drop it.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -9,7 +9,6 @@
+ #include <linux/platform_device.h>
+ #include <bcm63xx_regs.h>
+-#include <bcm63xx_irq.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_iudma.h>
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch
new file mode 100644 (file)
index 0000000..c489001
--- /dev/null
@@ -0,0 +1,39 @@
+From 943b0832e0cf3afe5bd40ffb1885d06106122c5d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 16 Jul 2017 12:49:49 +0200
+Subject: [PATCH 1/4] bcm63xx_enet: just use "enet" as the clock name
+
+Now that we have the individual clocks available as "enet" we
+don't need to rely on the device id for them anymore.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1720,7 +1720,6 @@ static int bcm_enet_probe(struct platfor
+       struct bcm63xx_enet_platform_data *pd;
+       struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
+       struct mii_bus *bus;
+-      const char *clk_name;
+       int i, ret;
+       if (!bcm_enet_shared_base[0])
+@@ -1761,14 +1760,12 @@ static int bcm_enet_probe(struct platfor
+       if (priv->mac_id == 0) {
+               priv->rx_chan = 0;
+               priv->tx_chan = 1;
+-              clk_name = "enet0";
+       } else {
+               priv->rx_chan = 2;
+               priv->tx_chan = 3;
+-              clk_name = "enet1";
+       }
+-      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
++      priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
+       if (IS_ERR(priv->mac_clk)) {
+               ret = PTR_ERR(priv->mac_clk);
+               goto out;
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch
new file mode 100644 (file)
index 0000000..f3ddd74
--- /dev/null
@@ -0,0 +1,72 @@
+From b7d1d1f345bb3b25c360c1df812d98866e2ee7fb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sat, 30 Sep 2017 13:50:03 +0200
+Subject: [PATCH 2/4] bcm63xx_enet: use platform data for dma channel numbers
+
+To reduce the reliance on device ids, pass the dma channel numbers to
+the enet devices as platform data.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-enet.c                          |  8 ++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h |  4 ++++
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c          | 11 ++---------
+ 3 files changed, 14 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int uni
+               dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
+       }
++      if (unit == 0) {
++              dpd->rx_chan = 0;
++              dpd->tx_chan = 1;
++      } else {
++              dpd->rx_chan = 2;
++              dpd->tx_chan = 3;
++      }
++
+       ret = platform_device_register(pdev);
+       if (ret)
+               return ret;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data {
+       /* DMA descriptor shift */
+       unsigned int dma_desc_shift;
++
++      /* dma channel ids */
++      int rx_chan;
++      int tx_chan;
+ };
+ /*
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1756,15 +1756,6 @@ static int bcm_enet_probe(struct platfor
+       priv->irq_tx = res_irq_tx->start;
+       priv->mac_id = pdev->id;
+-      /* get rx & tx dma channel id for this mac */
+-      if (priv->mac_id == 0) {
+-              priv->rx_chan = 0;
+-              priv->tx_chan = 1;
+-      } else {
+-              priv->rx_chan = 2;
+-              priv->tx_chan = 3;
+-      }
+-
+       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
+       if (IS_ERR(priv->mac_clk)) {
+               ret = PTR_ERR(priv->mac_clk);
+@@ -1796,6 +1787,8 @@ static int bcm_enet_probe(struct platfor
+               priv->dma_chan_width = pd->dma_chan_width;
+               priv->dma_has_sram = pd->dma_has_sram;
+               priv->dma_desc_shift = pd->dma_desc_shift;
++              priv->rx_chan = pd->rx_chan;
++              priv->tx_chan = pd->tx_chan;
+       }
+       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch
new file mode 100644 (file)
index 0000000..a656e4f
--- /dev/null
@@ -0,0 +1,25 @@
+From 8c61608e5dd2e15575c171ee9cd558ddc3b94962 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 17 Dec 2017 12:54:30 +0100
+Subject: [PATCH 3/4] bcm63xx_enet: remove pointless mac_id check
+
+Enabling the ephy clock for mac 1 is harmless, and the actual usage of
+the ephy is not restricted to mac 0, so we might as well remove the
+check.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1791,7 +1791,7 @@ static int bcm_enet_probe(struct platfor
+               priv->tx_chan = pd->tx_chan;
+       }
+-      if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
++      if (priv->has_phy && !priv->use_external_mii) {
+               /* using internal PHY, enable clock */
+               priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
+               if (IS_ERR(priv->phy_clk)) {
diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch
new file mode 100644 (file)
index 0000000..cab9e5a
--- /dev/null
@@ -0,0 +1,46 @@
+From faea89cd893a1a7af81185f026a64dad603ef72f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 17 Dec 2017 12:58:12 +0100
+Subject: [PATCH 4/4] bcm63xx_enet: use platform device id directly for miibus
+ name
+
+Directly use the platform device for generating the miibus name. This removes
+the last user of bcm_enet_priv::mac_id and we can remove the field.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 +--
+ drivers/net/ethernet/broadcom/bcm63xx_enet.h | 3 ---
+ 2 files changed, 1 insertion(+), 5 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1754,7 +1754,6 @@ static int bcm_enet_probe(struct platfor
+       dev->irq = priv->irq = res_irq->start;
+       priv->irq_rx = res_irq_rx->start;
+       priv->irq_tx = res_irq_tx->start;
+-      priv->mac_id = pdev->id;
+       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
+       if (IS_ERR(priv->mac_clk)) {
+@@ -1822,7 +1821,7 @@ static int bcm_enet_probe(struct platfor
+               bus->priv = priv;
+               bus->read = bcm_enet_mdio_read_phylib;
+               bus->write = bcm_enet_mdio_write_phylib;
+-              sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id);
++              sprintf(bus->id, "%s-%d", pdev->name, pdev->id);
+               /* only probe bus where we think the PHY is, because
+                * the mdio read operation return 0 instead of 0xffff
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -193,9 +193,6 @@ struct bcm_enet_mib_counters {
+ struct bcm_enet_priv {
+-      /* mac id (from platform device id) */
+-      int mac_id;
+-
+       /* base remapped address of device */
+       void __iomem *base;
diff --git a/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
new file mode 100644 (file)
index 0000000..3974b9b
--- /dev/null
@@ -0,0 +1,28 @@
+From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:19 +0100
+Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
+
+Knowledge of the clock setup delay should remain at the clock level (so
+it can be clock specific and CPU specific). Add the 100 milliseconds
+required clock delay for the USB host clock when it gets enabled.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else
++              return;
++
++      if (enable)
++              msleep(100);
+ }
+ static struct clk clk_usbh = {
diff --git a/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
new file mode 100644 (file)
index 0000000..a9651d0
--- /dev/null
@@ -0,0 +1,41 @@
+From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:20 +0100
+Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
+ clock code
+
+This patch adds the required 10 micro seconds delay to the USB device
+clock enable operation. Put this where the correct clock knowledege is,
+which is in the clock code, and remove this delay from the bcm63xx_udc
+gadget driver where it was before.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c          |    5 +++++
+ drivers/usb/gadget/bcm63xx_udc.c |    1 -
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else
++              return;
++
++      if (enable)
++              udelay(10);
+ }
+ static struct clk clk_usbd = {
+--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
++++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
+@@ -410,7 +410,6 @@ static inline void set_clocks(struct bcm
+       if (is_enabled) {
+               clk_enable(udc->usbh_clk);
+               clk_enable(udc->usbd_clk);
+-              udelay(10);
+       } else {
+               clk_disable(udc->usbd_clk);
+               clk_disable(udc->usbh_clk);
diff --git a/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
new file mode 100644 (file)
index 0000000..7ccb64c
--- /dev/null
@@ -0,0 +1,151 @@
+From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:21 +0100
+Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
+ register
+
+This patch moves the code touching the USB private register in the
+bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
+preparation for adding support for OHCI and EHCI host controllers which
+will also touch the USB private register.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
+ drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
+ 4 files changed, 67 insertions(+), 24 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/usb-common.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-usbd.o
++                 dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -0,0 +1,53 @@
++/*
++ * Broadcom BCM63xx common USB device configuration code
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
++ * Copyright (C) 2012 Broadcom Corporation
++ *
++ */
++#include <linux/export.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_device) {
++              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      } else {
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      }
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++      if (is_device)
++              val |= USBH_PRIV_SWAP_USBD_MASK;
++      else
++              val &= ~USBH_PRIV_SWAP_USBD_MASK;
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
++
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_on)
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      else
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -0,0 +1,9 @@
++#ifndef BCM63XX_USB_PRIV_H_
++#define BCM63XX_USB_PRIV_H_
++
++#include <linux/types.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++
++#endif /* BCM63XX_USB_PRIV_H_ */
+--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
++++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
+@@ -39,6 +39,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_usb_priv.h>
+ #define DRV_MODULE_NAME               "bcm63xx_udc"
+@@ -887,22 +888,7 @@ static void bcm63xx_select_phy_mode(stru
+               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+       }
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_device) {
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      } else {
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      }
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+-
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+-      if (is_device)
+-              val |= USBH_PRIV_SWAP_USBD_MASK;
+-      else
+-              val &= ~USBH_PRIV_SWAP_USBD_MASK;
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
+ }
+ /**
+@@ -916,14 +902,9 @@ static void bcm63xx_select_phy_mode(stru
+  */
+ static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+ {
+-      u32 val, portmask = BIT(udc->pd->port_no);
++      u32 portmask = BIT(udc->pd->port_no);
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_on)
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      else
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++      bcm63xx_usb_priv_select_pullup(portmask, is_on);
+ }
+ /**
diff --git a/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
new file mode 100644 (file)
index 0000000..40bbe08
--- /dev/null
@@ -0,0 +1,169 @@
+From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:22 +0100
+Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
+ common USB code
+
+This patch updates the common USB code touching the USB private
+registers with the specific bits to properly enable OHCI and EHCI
+controllers on BCM63xx SoCs. As a result we now need to protect access
+to Read Modify Write sequences using a spinlock because we cannot
+guarantee that any of the exposed helper will not be called
+concurrently.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
+ 2 files changed, 99 insertions(+)
+
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -5,10 +5,12 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+  * Copyright (C) 2012 Broadcom Corporation
+  *
+  */
++#include <linux/spinlock.h>
+ #include <linux/export.h>
+ #include <bcm63xx_cpu.h>
+@@ -16,9 +18,14 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_usb_priv.h>
++static DEFINE_SPINLOCK(usb_priv_reg_lock);
++
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_device) {
+@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
+       else
+               val &= ~USBH_PRIV_SWAP_USBD_MASK;
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_on)
+@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
+       else
+               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
++
++/* The following array represents the meaning of the DESC/DATA
++ * endian swapping with respect to the CPU configured endianness
++ *
++ * DATA       ENDN    mmio    descriptor
++ * 0  0       BE      invalid
++ * 0  1       BE      LE
++ * 1  0       BE      BE
++ * 1  1       BE      invalid
++ *
++ * Since BCM63XX SoCs are configured to be in big-endian mode
++ * we want configuration at line 3.
++ */
++void bcm63xx_usb_priv_ohci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6348())
++              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++      else if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
++
++void bcm63xx_usb_priv_ehci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -5,5 +5,7 @@
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++void bcm63xx_usb_priv_ohci_cfg_set(void);
++void bcm63xx_usb_priv_ehci_cfg_set(void);
+ #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..64ea473
--- /dev/null
@@ -0,0 +1,62 @@
+From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:23 +0100
+Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+OHCI controller, and ensures that all relevant OHCI-related
+configuration options are correctly selected. So far, OHCI support is
+available for the 6328, 6348, 6358 and 6358 SoCs.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++config BCM63XX_OHCI
++      bool
++      select USB_ARCH_HAS_OHCI
++      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
++      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
+       bool "support 6348 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
new file mode 100644 (file)
index 0000000..8a532fe
--- /dev/null
@@ -0,0 +1,138 @@
+From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:24 +0100
+Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
+driven by the ohci-platform generic driver by using specific power
+on/off/suspend callback to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
+ 3 files changed, 101 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-usbd.o usb-common.o
++                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,94 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ohci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ohci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ohci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .no_big_frame_no        = 1,
++      .num_ports              = 1,
++      .power_on               = bcm63xx_ohci_power_on,
++      .power_off              = bcm63xx_ohci_power_off,
++      .power_suspend          = bcm63xx_ohci_power_off,
++};
++
++static struct platform_device bcm63xx_ohci_device = {
++      .name           = "ohci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ohci_resources),
++      .resource       = ohci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ohci_pdata,
++              .dma_mask               = &ohci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
++              return -ENODEV;
++
++      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++      ohci_resources[0].end = ohci_resources[0].start;
++      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++
++      return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..6fc5551
--- /dev/null
@@ -0,0 +1,36 @@
+From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:25 +0100
+Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
+ enables it
+
+BCM63XX-based boards can control the registration of the OHCI controller
+by setting their has_ohci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to
+register the OHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -27,6 +27,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -881,6 +882,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+        */
diff --git a/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..f7311a8
--- /dev/null
@@ -0,0 +1,62 @@
+From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:26 +0100
+Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+EHCI controller, and ensures that all relevant EHCI-related
+configuration options are selected. So far BCM6328, BCM6358 and BCM6368
+have an EHCI controller and do select this symbol. Update
+drivers/usb/host/Kconfig with BCM63XX to update direct unmet
+dependencies.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |    9 +++++++++
+ drivers/usb/host/Kconfig  |    5 +++--
+ 2 files changed, 12 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -13,11 +13,18 @@ config BCM63XX_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
+       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++config BCM63XX_EHCI
++      bool
++      select USB_ARCH_HAS_EHCI
++      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
++      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
new file mode 100644 (file)
index 0000000..7d0a35c
--- /dev/null
@@ -0,0 +1,136 @@
+From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:27 +0100
+Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
+driven by the generic ehci-platform driver by using specific power
+on/off/suspend callbacks to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
+ 3 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,92 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/usb/ehci_pdriver.h>
++#include <linux/dma-mapping.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ehci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ehci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ehci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ehci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .power_on               = bcm63xx_ehci_power_on,
++      .power_off              = bcm63xx_ehci_power_off,
++      .power_suspend          = bcm63xx_ehci_power_off,
++};
++
++static struct platform_device bcm63xx_ehci_device = {
++      .name           = "ehci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ehci_resources),
++      .resource       = ehci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ehci_pdata,
++              .dma_mask               = &ehci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              return 0;
++
++      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++      ehci_resources[0].end = ehci_resources[0].start;
++      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++
++      return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..3db82bb
--- /dev/null
@@ -0,0 +1,36 @@
+From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:28 +0100
+Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
+ enables it
+
+BCM63XX-based board can control the registration of the EHCI controller
+by setting their has_ehci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to register
+the EHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -27,6 +27,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -882,6 +883,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
+       if (board.has_ohci0)
+               bcm63xx_ohci_register();
diff --git a/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
new file mode 100644 (file)
index 0000000..6d91129
--- /dev/null
@@ -0,0 +1,24 @@
+From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:30 +0100
+Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
+ overcurrent
+
+This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
+does not support proper overcurrent reporting.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
+ static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
++      .ignore_oc              = 1,
+       .power_on               = bcm63xx_ehci_power_on,
+       .power_off              = bcm63xx_ehci_power_off,
+       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch
new file mode 100644 (file)
index 0000000..6a714eb
--- /dev/null
@@ -0,0 +1,481 @@
+From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:29:43 +0200
+Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser
+
+Move the bcm963xx Image Tag parsing into its own partition parser. This
+Allows reusing the parser with different full flash parsers.
+
+While moving it, rename it to bcm963* to better reflect it isn't chip
+but board specific.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+I tried to keep the code as-is, to keep the changes as small as
+possible.
+
+One side effect is that the partitions get renumbered, which means any
+root=/dev/mtdblock* will now point to the wrong mtd device. But since
+bcm963xx boards will require these hardcoded in the kernel commandline
+anyway this should b a non issue, as it can be easily updated.
+
+There is no such thing in the mips/bcm63xx defconfig, so nothing to update
+there.
+
+ drivers/mtd/Kconfig                   |   1 +
+ drivers/mtd/bcm63xxpart.c             | 155 ++----------------------
+ drivers/mtd/parsers/Kconfig           |  11 ++
+ drivers/mtd/parsers/Makefile          |   1 +
+ drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++
+ 5 files changed, 235 insertions(+), 147 deletions(-)
+ create mode 100644 drivers/mtd/parsers/parser_imagetag.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -163,6 +163,7 @@ config MTD_BCM63XX_PARTS
+       tristate "BCM63XX CFE partitioning support"
+       depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+       select CRC32
++      select MTD_PARSER_IMAGETAG
+       help
+         This provides partions parsing for BCM63xx devices with CFE
+         bootloaders.
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd
+       return 0;
+ }
+-static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
+-      loff_t tag_offset, struct bcm_tag *buf)
+-{
+-      int ret;
+-      size_t retlen;
+-      u32 computed_crc;
+-
+-      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
+-      if (ret)
+-              return ret;
+-
+-      if (retlen != sizeof(*buf))
+-              return -EIO;
+-
+-      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
+-                              offsetof(struct bcm_tag, header_crc));
+-      if (computed_crc == buf->header_crc) {
+-              STR_NULL_TERMINATE(buf->board_id);
+-              STR_NULL_TERMINATE(buf->tag_version);
+-
+-              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
+-                      name, tag_offset, buf->tag_version, buf->board_id);
+-
+-              return 0;
+-      }
+-
+-      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
+-              name, tag_offset, buf->header_crc, computed_crc);
+-      return 1;
+-}
++static const char * const bcm63xx_cfe_part_types[] = {
++      "bcm963xx-imagetag",
++      NULL,
++};
+ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
+       const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
+ {
+-      /* CFE, NVRAM and global Linux are always present */
+-      int nrparts = 3, curpart = 0;
+-      struct bcm_tag *buf = NULL;
+       struct mtd_partition *parts;
+-      int ret;
+-      unsigned int rootfsaddr, kerneladdr, spareaddr;
+-      unsigned int rootfslen, kernellen, sparelen, totallen;
++      int nrparts = 3, curpart = 0;
+       unsigned int cfelen, nvramlen;
+       unsigned int cfe_erasesize;
+       int i;
+-      bool rootfs_first = false;
+       cfe_erasesize = max_t(uint32_t, master->erasesize,
+                             BCM963XX_CFE_BLOCK_SIZE);
+@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti
+       nvramlen = nvram->psi_size * SZ_1K;
+       nvramlen = roundup(nvramlen, cfe_erasesize);
+-      buf = vmalloc(sizeof(struct bcm_tag));
+-      if (!buf)
+-              return -ENOMEM;
+-
+-      /* Get the tag */
+-      ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
+-      if (!ret) {
+-              STR_NULL_TERMINATE(buf->flash_image_start);
+-              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
+-                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
+-                      pr_err("invalid rootfs address: %*ph\n",
+-                              (int)sizeof(buf->flash_image_start),
+-                              buf->flash_image_start);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->kernel_address);
+-              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
+-                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
+-                      pr_err("invalid kernel address: %*ph\n",
+-                              (int)sizeof(buf->kernel_address),
+-                              buf->kernel_address);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->kernel_length);
+-              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
+-                      pr_err("invalid kernel length: %*ph\n",
+-                              (int)sizeof(buf->kernel_length),
+-                              buf->kernel_length);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->total_length);
+-              if (kstrtouint(buf->total_length, 10, &totallen)) {
+-                      pr_err("invalid total length: %*ph\n",
+-                              (int)sizeof(buf->total_length),
+-                              buf->total_length);
+-                      goto invalid_tag;
+-              }
+-
+-              kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
+-              rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
+-              spareaddr = roundup(totallen, master->erasesize) + cfelen;
+-
+-              if (rootfsaddr < kerneladdr) {
+-                      /* default Broadcom layout */
+-                      rootfslen = kerneladdr - rootfsaddr;
+-                      rootfs_first = true;
+-              } else {
+-                      /* OpenWrt layout */
+-                      rootfsaddr = kerneladdr + kernellen;
+-                      rootfslen = spareaddr - rootfsaddr;
+-              }
+-      } else if (ret > 0) {
+-invalid_tag:
+-              kernellen = 0;
+-              rootfslen = 0;
+-              rootfsaddr = 0;
+-              spareaddr = cfelen;
+-      } else {
+-              goto out;
+-      }
+-      sparelen = master->size - spareaddr - nvramlen;
+-
+-      /* Determine number of partitions */
+-      if (rootfslen > 0)
+-              nrparts++;
+-
+-      if (kernellen > 0)
+-              nrparts++;
+-
+       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+-      if (!parts) {
+-              ret = -ENOMEM;
+-              goto out;
+-      }
++      if (!parts)
++              return -ENOMEM;
+       /* Start building partition list */
+       parts[curpart].name = "CFE";
+@@ -230,30 +124,6 @@ invalid_tag:
+       parts[curpart].size = cfelen;
+       curpart++;
+-      if (kernellen > 0) {
+-              int kernelpart = curpart;
+-
+-              if (rootfslen > 0 && rootfs_first)
+-                      kernelpart++;
+-              parts[kernelpart].name = "kernel";
+-              parts[kernelpart].offset = kerneladdr;
+-              parts[kernelpart].size = kernellen;
+-              curpart++;
+-      }
+-
+-      if (rootfslen > 0) {
+-              int rootfspart = curpart;
+-
+-              if (kernellen > 0 && rootfs_first)
+-                      rootfspart--;
+-              parts[rootfspart].name = "rootfs";
+-              parts[rootfspart].offset = rootfsaddr;
+-              parts[rootfspart].size = rootfslen;
+-              if (sparelen > 0  && !rootfs_first)
+-                      parts[rootfspart].size += sparelen;
+-              curpart++;
+-      }
+-
+       parts[curpart].name = "nvram";
+       parts[curpart].offset = master->size - nvramlen;
+       parts[curpart].size = nvramlen;
+@@ -263,22 +133,13 @@ invalid_tag:
+       parts[curpart].name = "linux";
+       parts[curpart].offset = cfelen;
+       parts[curpart].size = master->size - cfelen - nvramlen;
++      parts[curpart].types = bcm63xx_cfe_part_types;
+       for (i = 0; i < nrparts; i++)
+               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+                       parts[i].name, parts[i].offset, parts[i].size);
+-      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
+-              sparelen);
+-
+       *pparts = parts;
+-      ret = 0;
+-
+-out:
+-      vfree(buf);
+-
+-      if (ret)
+-              return ret;
+       return nrparts;
+ }
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -1,3 +1,14 @@
++config MTD_PARSER_IMAGETAG
++      tristate "Parser for BCM963XX Image Tag format partitions"
++      depends on BCM63XX || BMIPS || COMPILE_TEST
++      select CRC32
++      help
++        Image Tag is the firmware header used by broadcom on their xDSL line
++        of devices. It is used to describe the offsets and lengths of kernel
++        and rootfs partitions.
++        This driver adds support for parsing a partition with an Image Tag
++        header and creates up to two partitions, kernel and rootfs.
++
+ config MTD_PARSER_TRX
+       tristate "Parser for TRX format partitions"
+       depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -1 +1,2 @@
++obj-$(CONFIG_MTD_PARSER_IMAGETAG)     += parser_imagetag.o
+ obj-$(CONFIG_MTD_PARSER_TRX)          += parser_trx.o
+--- /dev/null
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -0,0 +1,214 @@
++/*
++ * BCM63XX CFE image tag parser
++ *
++ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
++ *                      Mike Albon <malbon@openwrt.org>
++ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
++ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++
++#include <linux/bcm963xx_tag.h>
++#include <linux/crc32.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++/* Ensure strings read from flash structs are null terminated */
++#define STR_NULL_TERMINATE(x) \
++      do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
++
++static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
++      loff_t tag_offset, struct bcm_tag *buf)
++{
++      int ret;
++      size_t retlen;
++      u32 computed_crc;
++
++      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
++      if (ret)
++              return ret;
++
++      if (retlen != sizeof(*buf))
++              return -EIO;
++
++      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
++                              offsetof(struct bcm_tag, header_crc));
++      if (computed_crc == buf->header_crc) {
++              STR_NULL_TERMINATE(buf->board_id);
++              STR_NULL_TERMINATE(buf->tag_version);
++
++              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
++                      name, tag_offset, buf->tag_version, buf->board_id);
++
++              return 0;
++      }
++
++      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
++              name, tag_offset, buf->header_crc, computed_crc);
++      return -EINVAL;
++}
++
++static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
++                                      const struct mtd_partition **pparts,
++                                      struct mtd_part_parser_data *data)
++{
++      /* CFE, NVRAM and global Linux are always present */
++      int nrparts = 0, curpart = 0;
++      struct bcm_tag *buf = NULL;
++      struct mtd_partition *parts;
++      int ret;
++      unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
++      unsigned int rootfslen, kernellen, sparelen, totallen;
++      int i;
++      bool rootfs_first = false;
++
++      buf = vmalloc(sizeof(struct bcm_tag));
++      if (!buf)
++              return -ENOMEM;
++
++      /* Get the tag */
++      ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
++      if (!ret) {
++              STR_NULL_TERMINATE(buf->flash_image_start);
++              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
++                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
++                      pr_err("invalid rootfs address: %*ph\n",
++                              (int)sizeof(buf->flash_image_start),
++                              buf->flash_image_start);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->kernel_address);
++              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
++                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
++                      pr_err("invalid kernel address: %*ph\n",
++                              (int)sizeof(buf->kernel_address),
++                              buf->kernel_address);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->kernel_length);
++              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
++                      pr_err("invalid kernel length: %*ph\n",
++                              (int)sizeof(buf->kernel_length),
++                              buf->kernel_length);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->total_length);
++              if (kstrtouint(buf->total_length, 10, &totallen)) {
++                      pr_err("invalid total length: %*ph\n",
++                              (int)sizeof(buf->total_length),
++                              buf->total_length);
++                      goto out;
++              }
++
++              /*
++               * Addresses are flash absolute, so convert to partition
++               * relative addresses. Assume either kernel or rootfs will
++               * directly follow the image tag.
++               */
++              if (rootfsaddr < kerneladdr)
++                      offset = rootfsaddr - sizeof(struct bcm_tag);
++              else
++                      offset = kerneladdr - sizeof(struct bcm_tag);
++
++              kerneladdr = kerneladdr - offset;
++              rootfsaddr = rootfsaddr - offset;
++              spareaddr = roundup(totallen, master->erasesize);
++
++              if (rootfsaddr < kerneladdr) {
++                      /* default Broadcom layout */
++                      rootfslen = kerneladdr - rootfsaddr;
++                      rootfs_first = true;
++              } else {
++                      /* OpenWrt layout */
++                      rootfsaddr = kerneladdr + kernellen;
++                      rootfslen = spareaddr - rootfsaddr;
++              }
++      } else {
++              goto out;
++      }
++      sparelen = master->size - spareaddr;
++
++      /* Determine number of partitions */
++      if (rootfslen > 0)
++              nrparts++;
++
++      if (kernellen > 0)
++              nrparts++;
++
++      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
++      if (!parts) {
++              ret = -ENOMEM;
++              goto out;
++      }
++
++      /* Start building partition list */
++      if (kernellen > 0) {
++              int kernelpart = curpart;
++
++              if (rootfslen > 0 && rootfs_first)
++                      kernelpart++;
++              parts[kernelpart].name = "kernel";
++              parts[kernelpart].offset = kerneladdr;
++              parts[kernelpart].size = kernellen;
++              curpart++;
++      }
++
++      if (rootfslen > 0) {
++              int rootfspart = curpart;
++
++              if (kernellen > 0 && rootfs_first)
++                      rootfspart--;
++              parts[rootfspart].name = "rootfs";
++              parts[rootfspart].offset = rootfsaddr;
++              parts[rootfspart].size = rootfslen;
++              if (sparelen > 0  && !rootfs_first)
++                      parts[rootfspart].size += sparelen;
++              curpart++;
++      }
++
++      for (i = 0; i < nrparts; i++)
++              pr_info("Partition %d is %s offset %llx and length %llx\n", i,
++                      parts[i].name, parts[i].offset, parts[i].size);
++
++      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
++              sparelen);
++
++      *pparts = parts;
++      ret = 0;
++
++out:
++      vfree(buf);
++
++      if (ret)
++              return ret;
++
++      return nrparts;
++}
++
++static struct mtd_part_parser bcm963xx_imagetag_parser = {
++      .parse_fn = bcm963xx_parse_imagetag_partitions,
++      .name = "bcm963xx-imagetag",
++};
++module_mtd_part_parser(bcm963xx_imagetag_parser);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
++MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
++MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch b/target/linux/bcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch
new file mode 100644 (file)
index 0000000..9b3f2c4
--- /dev/null
@@ -0,0 +1,37 @@
+From 89cd5efa4a0d342b860a726bb1d382e4db4b96a4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:34:42 +0200
+Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/bcm63xxpart.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -34,6 +34,7 @@
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+ #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
+@@ -172,9 +173,16 @@ out:
+       return ret;
+ };
++static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
++      { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
++      {},
++};
++MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
++
+ static struct mtd_part_parser bcm63xx_cfe_parser = {
+       .parse_fn = bcm63xx_parse_cfe_partitions,
+       .name = "bcm63xxpart",
++      .of_match_table = parse_bcm63xx_cfe_match_table,
+ };
+ module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch
new file mode 100644 (file)
index 0000000..04978b3
--- /dev/null
@@ -0,0 +1,37 @@
+From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:37:12 +0200
+Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/parsers/parser_imagetag.c
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -24,6 +24,7 @@
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+ /* Ensure strings read from flash structs are null terminated */
+ #define STR_NULL_TERMINATE(x) \
+@@ -200,9 +201,16 @@ out:
+       return nrparts;
+ }
++static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
++      { .compatible = "brcm,bcm963xx-imagetag" },
++      {},
++};
++MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
++
+ static struct mtd_part_parser bcm963xx_imagetag_parser = {
+       .parse_fn = bcm963xx_parse_imagetag_partitions,
+       .name = "bcm963xx-imagetag",
++      .of_match_table = parse_bcm963xx_imagetag_match_table,
+ };
+ module_mtd_part_parser(bcm963xx_imagetag_parser);
diff --git a/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch
new file mode 100644 (file)
index 0000000..53e8932
--- /dev/null
@@ -0,0 +1,226 @@
+From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:07:42 +0200
+Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
+
+Setup directory and add a helper for bcm63xx pinctrl support.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/Kconfig                   |   1 +
+ drivers/pinctrl/Makefile                  |   1 +
+ drivers/pinctrl/bcm63xx/Kconfig           |   3 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
+ 7 files changed, 163 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
+ create mode 100644 drivers/pinctrl/bcm63xx/Makefile
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
+
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -351,6 +351,7 @@ config PINCTRL_RK805
+ source "drivers/pinctrl/aspeed/Kconfig"
+ source "drivers/pinctrl/bcm/Kconfig"
++source "drivers/pinctrl/bcm63xx/Kconfig"
+ source "drivers/pinctrl/berlin/Kconfig"
+ source "drivers/pinctrl/freescale/Kconfig"
+ source "drivers/pinctrl/intel/Kconfig"
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_RK805)  += pinctrl-r
+ obj-$(CONFIG_ARCH_ASPEED)     += aspeed/
+ obj-y                         += bcm/
++obj-y                         += bcm63xx/
+ obj-$(CONFIG_PINCTRL_BERLIN)  += berlin/
+ obj-y                         += freescale/
+ obj-$(CONFIG_X86)             += intel/
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -0,0 +1,3 @@
++config PINCTRL_BCM63XX
++      bool
++      select GPIO_GENERIC
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
+@@ -0,0 +1,155 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/device.h>
++#include <linux/gpio/driver.h>
++#include <linux/of_irq.h>
++
++#include "pinctrl-bcm63xx.h"
++#include "../core.h"
++
++#define BANK_SIZE     sizeof(u32)
++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
++
++#ifdef CONFIG_OF
++static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
++                               const struct of_phandle_args *gpiospec,
++                               u32 *flags)
++{
++      struct gpio_chip *base = gpiochip_get_data(gc);
++      int pin = gpiospec->args[0];
++
++      if (gc != &base[pin / PINS_PER_BANK])
++              return -EINVAL;
++
++      pin = pin % PINS_PER_BANK;
++
++      if (pin >= gc->ngpio)
++              return -EINVAL;
++
++      if (flags)
++              *flags = gpiospec->args[1];
++
++      return pin;
++}
++#endif
++
++static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++      struct gpio_chip *base = gpiochip_get_data(chip);
++      char irq_name[7]; /* "gpioXX" */
++
++      /* FIXME: this is ugly */
++      sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
++      return of_irq_get_byname(chip->of_node, irq_name);
++}
++
++static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
++                            void __iomem *dirout, void __iomem *data,
++                            size_t sz, int ngpio)
++
++{
++      int banks, chips, i, ret = -EINVAL;
++
++      chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
++      banks = sz / BANK_SIZE;
++
++      for (i = 0; i < chips; i++) {
++              int offset, pins;
++              int reg_offset;
++              char *label;
++
++              label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
++              if (!label)
++                      return -ENOMEM;
++
++              offset = i * PINS_PER_BANK;
++              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
++
++              /* the registers are treated like a huge big endian register */
++              reg_offset = (banks - i - 1) * BANK_SIZE;
++
++              ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
++                               NULL, NULL, dirout + reg_offset, NULL,
++                               BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++              if (ret)
++                      return ret;
++
++              gc[i].request = gpiochip_generic_request;
++              gc[i].free = gpiochip_generic_free;
++
++              if (of_get_property(dev->of_node, "interrupt-names", NULL))
++                      gc[i].to_irq = bcm63xx_gpio_to_irq;
++
++#ifdef CONFIG_OF
++              gc[i].of_gpio_n_cells = 2;
++              gc[i].of_xlate = bcm63xx_gpio_of_xlate;
++#endif
++
++              gc[i].label = label;
++              gc[i].ngpio = pins;
++
++              devm_gpiochip_add_data(dev, &gc[i], gc);
++      }
++
++      return 0;
++}
++
++static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
++                                  int ngpio)
++{
++      int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
++
++      for (i = 0; i < chips; i++) {
++              int offset, pins;
++
++              offset = i * PINS_PER_BANK;
++              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
++
++              gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
++      }
++}
++
++struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
++                                           struct pinctrl_desc *desc,
++                                           void *priv, struct gpio_chip *gc,
++                                           int ngpio)
++{
++      struct pinctrl_dev *pctldev;
++      struct resource *res;
++      void __iomem *dirout, *data;
++      size_t sz;
++      int ret;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
++      dirout = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(dirout))
++              return ERR_CAST(dirout);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
++      data = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(data))
++              return ERR_CAST(data);
++
++      sz = resource_size(res);
++
++      ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
++      if (ret)
++              return ERR_PTR(ret);
++
++      pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
++      if (IS_ERR(pctldev))
++              return pctldev;
++
++      bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
++
++      dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
++
++      return pctldev;
++}
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
+@@ -0,0 +1,14 @@
++#ifndef __PINCTRL_BCM63XX
++#define __PINCTRL_BCM63XX
++
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/platform_device.h>
++
++struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
++                                           struct pinctrl_desc *desc,
++                                           void *priv, struct gpio_chip *gc,
++                                           int ngpio);
++
++#endif
diff --git a/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..3a2a781
--- /dev/null
@@ -0,0 +1,78 @@
+From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:33:56 +0200
+Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6328 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
+@@ -0,0 +1,61 @@
++* Broadcom BCM6328 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6328-pinctrl".
++- reg: Register specifies of dirout, dat, mode, mux registers.
++- reg-names: Must be "dirout", "dat", "mode", "mux".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6328-pinctrl";
++      reg = <0x10000080 0x8>,
++            <0x10000088 0x8>,
++            <0x10000098 0x4>,
++            <0x1000009c 0xc>;
++      reg-names = "dirout", "dat", "mode", "mux";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       led
++gpio1         1       led
++gpio2         2       led
++gpio3         3       led
++gpio4         4       led
++gpio5         5       led
++gpio6         6       led, serial_led_data
++gpio7         7       led, serial_led_clk
++gpio8         8       led
++gpio9         9       led
++gpio10                10      led
++gpio11                11      led
++gpio12                12      led
++gpio13                13      led
++gpio14                14      led
++gpio15                15      led
++gpio16                16      led, pcie_clkreq
++gpio17                17      led
++gpio18                18      led
++gpio19                19      led
++gpio20                20      led
++gpio21                21      led
++gpio22                22      led
++gpio23                23      led
++gpio24                24      -
++gpio25                25      ephy0_act_led
++gpio26                26      ephy1_act_led
++gpio27                27      ephy2_act_led
++gpio28                28      ephy3_act_led
++gpio29                29      -
++gpio30                30      -
++gpio31                31      -
++hsspi_cs1     -       hsspi_cs1
++usb_port1     -       usb_host_port, usb_device_port
diff --git a/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
new file mode 100644 (file)
index 0000000..3c5f15b
--- /dev/null
@@ -0,0 +1,495 @@
+From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:12:50 +0200
+Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
+
+Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
+GPIOs, as LEDs for the integrated LED controller, or various other
+functions. Its pincontrol mux registers also control other aspects, like
+switching the second USB port between host and device mode.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
+ 3 files changed, 464 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -1,3 +1,10 @@
+ config PINCTRL_BCM63XX
+       bool
+       select GPIO_GENERIC
++
++config PINCTRL_BCM6328
++      bool "BCM6328 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
++obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
+@@ -0,0 +1,456 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/machine.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6328_MUX_LO_REG    0x4
++#define BCM6328_MUX_HI_REG    0x0
++#define BCM6328_MUX_OTHER_REG 0x8
++
++#define BCM6328_NGPIO         32
++
++struct bcm6328_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6328_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned mode_val:1;
++      unsigned mux_val:2;
++};
++
++struct bcm6328_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      void __iomem *mux[3];
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio;
++};
++
++static const struct pinctrl_pin_desc bcm6328_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++
++      /*
++       * No idea where they really are; so let's put them according
++       * to their mux offsets.
++       */
++      PINCTRL_PIN(36, "hsspi_cs1"),
++      PINCTRL_PIN(38, "usb_p2"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++
++static unsigned hsspi_cs1_pins[] = { 36 };
++static unsigned usb_port1_pins[] = { 38 };
++
++#define BCM6328_GROUP(n)                                      \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm6328_pingroup bcm6328_groups[] = {
++      BCM6328_GROUP(gpio0),
++      BCM6328_GROUP(gpio1),
++      BCM6328_GROUP(gpio2),
++      BCM6328_GROUP(gpio3),
++      BCM6328_GROUP(gpio4),
++      BCM6328_GROUP(gpio5),
++      BCM6328_GROUP(gpio6),
++      BCM6328_GROUP(gpio7),
++      BCM6328_GROUP(gpio8),
++      BCM6328_GROUP(gpio9),
++      BCM6328_GROUP(gpio10),
++      BCM6328_GROUP(gpio11),
++      BCM6328_GROUP(gpio12),
++      BCM6328_GROUP(gpio13),
++      BCM6328_GROUP(gpio14),
++      BCM6328_GROUP(gpio15),
++      BCM6328_GROUP(gpio16),
++      BCM6328_GROUP(gpio17),
++      BCM6328_GROUP(gpio18),
++      BCM6328_GROUP(gpio19),
++      BCM6328_GROUP(gpio20),
++      BCM6328_GROUP(gpio21),
++      BCM6328_GROUP(gpio22),
++      BCM6328_GROUP(gpio23),
++      BCM6328_GROUP(gpio24),
++      BCM6328_GROUP(gpio25),
++      BCM6328_GROUP(gpio26),
++      BCM6328_GROUP(gpio27),
++      BCM6328_GROUP(gpio28),
++      BCM6328_GROUP(gpio29),
++      BCM6328_GROUP(gpio30),
++      BCM6328_GROUP(gpio31),
++
++      BCM6328_GROUP(hsspi_cs1),
++      BCM6328_GROUP(usb_port1),
++};
++
++/* GPIO_MODE */
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++/* PINMUX_SEL */
++static const char * const serial_led_data_groups[] = {
++      "gpio6",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_act_led_groups[] = {
++      "gpio11",
++};
++
++static const char * const pcie_clkreq_groups[] = {
++      "gpio16",
++};
++
++static const char * const ephy0_act_led_groups[] = {
++      "gpio25",
++};
++
++static const char * const ephy1_act_led_groups[] = {
++      "gpio26",
++};
++
++static const char * const ephy2_act_led_groups[] = {
++      "gpio27",
++};
++
++static const char * const ephy3_act_led_groups[] = {
++      "gpio28",
++};
++
++static const char * const hsspi_cs1_groups[] = {
++      "hsspi_cs1"
++};
++
++static const char * const usb_host_port_groups[] = {
++      "usb_port1",
++};
++
++static const char * const usb_device_port_groups[] = {
++      "usb_port1",
++};
++
++#define BCM6328_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mode_val = 1,                          \
++      }
++
++#define BCM6328_MUX_FUN(n, mux)                               \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mux_val = mux,                         \
++      }
++
++static const struct bcm6328_function bcm6328_funcs[] = {
++      BCM6328_MODE_FUN(led),
++      BCM6328_MUX_FUN(serial_led_data, 2),
++      BCM6328_MUX_FUN(serial_led_clk, 2),
++      BCM6328_MUX_FUN(inet_act_led, 1),
++      BCM6328_MUX_FUN(pcie_clkreq, 2),
++      BCM6328_MUX_FUN(ephy0_act_led, 1),
++      BCM6328_MUX_FUN(ephy1_act_led, 1),
++      BCM6328_MUX_FUN(ephy2_act_led, 1),
++      BCM6328_MUX_FUN(ephy3_act_led, 1),
++      BCM6328_MUX_FUN(hsspi_cs1, 2),
++      BCM6328_MUX_FUN(usb_host_port, 1),
++      BCM6328_MUX_FUN(usb_device_port, 2),
++};
++
++static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6328_groups);
++}
++
++static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6328_groups[group].name;
++}
++
++static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6328_groups[group].pins;
++      *num_pins = bcm6328_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6328_funcs);
++}
++
++static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6328_funcs[selector].name;
++}
++
++static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6328_funcs[selector].groups;
++      *num_groups = bcm6328_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
++                          u32 mode, u32 mux)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (pin < 32) {
++              reg = __raw_readl(pctl->mode);
++              reg &= ~BIT(pin);
++              if (mode)
++                      reg |= BIT(pin);
++              __raw_writel(reg, pctl->mode);
++      }
++
++      reg = __raw_readl(pctl->mux[pin / 16]);
++      reg &= ~(3UL << ((pin % 16) * 2));
++      reg |= mux << ((pin % 16) * 2);
++      __raw_writel(reg, pctl->mux[pin / 16]);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
++      const struct bcm6328_function *f = &bcm6328_funcs[selector];
++
++      bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
++
++      return 0;
++}
++
++static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm6328_rmw_mux(pctl, offset, 0, 0);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6328_pctl_ops = {
++      .get_groups_count       = bcm6328_pinctrl_get_group_count,
++      .get_group_name         = bcm6328_pinctrl_get_group_name,
++      .get_group_pins         = bcm6328_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6328_pmx_ops = {
++      .get_functions_count    = bcm6328_pinctrl_get_func_count,
++      .get_function_name      = bcm6328_pinctrl_get_func_name,
++      .get_function_groups    = bcm6328_pinctrl_get_groups,
++      .set_mux                = bcm6328_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6328_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6328_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6328_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode, *mux;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
++      mux = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mux))
++              return PTR_ERR(mux);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++      pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
++      pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
++      pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6328_pctl_ops;
++      pctl->desc.pmxops = &bcm6328_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
++      pctl->desc.pins = bcm6328_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               &pctl->gpio, BCM6328_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6328_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6328-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6328_pinctrl_driver = {
++      .probe = bcm6328_pinctrl_probe,
++      .driver = {
++              .name = "bcm6328-pinctrl",
++              .of_match_table = bcm6328_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..6bac903
--- /dev/null
@@ -0,0 +1,49 @@
+From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:35:45 +0200
+Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6348 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
+ 1 file changed, 32 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
+@@ -0,0 +1,32 @@
++* Broadcom BCM6348 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6348-pinctrl".
++- reg: register Specifiers of dirout, dat, mode registers.
++- reg-names: Must be "dirout", "dat", "mode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@fffe0080 {
++      compatible = "brcm,bcm6348-pinctrl";
++      reg = <0xfffe0080 0x8>,
++            <0xfffe0088 0x8>,
++            <0xfffe0098 0x4>;
++      reg-names = "dirout", "dat", "mode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++group0                32-36   ext_mii, utopia, diag
++group1                22-31   ext_ephy, mii_snoop, mii_pccard,
++                      spi_master_uart, utopia, diag
++group2                16-21   pci, diag
++group3                8-15    ext_mii, utopia
++group4                0-7     ext_ephy, mii_snoop, legacy_led, diag
diff --git a/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
new file mode 100644 (file)
index 0000000..b48723c
--- /dev/null
@@ -0,0 +1,431 @@
+From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:14:13 +0200
+Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
+
+Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
+up to ten gpios into fourteen potential functions. It does not allow
+muxing individual pins. Some functions require more than one group to be
+muxed to the same function.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
+ 3 files changed, 399 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6348
++      bool "BCM6348 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,2 +1,3 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
++obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
+@@ -0,0 +1,391 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/machine.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6348_NGPIO         37
++
++#define MAX_GROUP             4
++#define PINS_PER_GROUP                8
++#define PIN_TO_GROUP(pin)     (MAX_GROUP - ((pin) / PINS_PER_GROUP))
++#define GROUP_SHIFT(pin)      (PIN_TO_GROUP(pin) * 4)
++#define GROUP_MASK(pin)               (0xf << GROUP_SHIFT(pin))
++
++struct bcm6348_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6348_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++      unsigned int value;
++};
++
++struct bcm6348_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6348_PIN(a, b, group)              \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)(group),    \
++      }
++
++static const struct pinctrl_pin_desc bcm6348_pins[] = {
++      BCM6348_PIN(0, "gpio0", 4),
++      BCM6348_PIN(1, "gpio1", 4),
++      BCM6348_PIN(2, "gpio2", 4),
++      BCM6348_PIN(3, "gpio3", 4),
++      BCM6348_PIN(4, "gpio4", 4),
++      BCM6348_PIN(5, "gpio5", 4),
++      BCM6348_PIN(6, "gpio6", 4),
++      BCM6348_PIN(7, "gpio7", 4),
++      BCM6348_PIN(8, "gpio8", 3),
++      BCM6348_PIN(9, "gpio9", 3),
++      BCM6348_PIN(10, "gpio10", 3),
++      BCM6348_PIN(11, "gpio11", 3),
++      BCM6348_PIN(12, "gpio12", 3),
++      BCM6348_PIN(13, "gpio13", 3),
++      BCM6348_PIN(14, "gpio14", 3),
++      BCM6348_PIN(15, "gpio15", 3),
++      BCM6348_PIN(16, "gpio16", 2),
++      BCM6348_PIN(17, "gpio17", 2),
++      BCM6348_PIN(18, "gpio18", 2),
++      BCM6348_PIN(19, "gpio19", 2),
++      BCM6348_PIN(20, "gpio20", 2),
++      BCM6348_PIN(21, "gpio21", 2),
++      BCM6348_PIN(22, "gpio22", 1),
++      BCM6348_PIN(23, "gpio23", 1),
++      BCM6348_PIN(24, "gpio24", 1),
++      BCM6348_PIN(25, "gpio25", 1),
++      BCM6348_PIN(26, "gpio26", 1),
++      BCM6348_PIN(27, "gpio27", 1),
++      BCM6348_PIN(28, "gpio28", 1),
++      BCM6348_PIN(29, "gpio29", 1),
++      BCM6348_PIN(30, "gpio30", 1),
++      BCM6348_PIN(31, "gpio31", 1),
++      BCM6348_PIN(32, "gpio32", 0),
++      BCM6348_PIN(33, "gpio33", 0),
++      BCM6348_PIN(34, "gpio34", 0),
++      BCM6348_PIN(35, "gpio35", 0),
++      BCM6348_PIN(36, "gpio36", 0),
++};
++
++enum bcm6348_muxes {
++      BCM6348_MUX_GPIO = 0,
++      BCM6348_MUX_EXT_EPHY,
++      BCM6348_MUX_MII_SNOOP,
++      BCM6348_MUX_LEGACY_LED,
++      BCM6348_MUX_MII_PCCARD,
++      BCM6348_MUX_PCI,
++      BCM6348_MUX_SPI_MASTER_UART,
++      BCM6348_MUX_EXT_MII,
++      BCM6348_MUX_UTOPIA,
++      BCM6348_MUX_DIAG,
++};
++
++static unsigned group0_pins[] = {
++      32, 33, 34, 35, 36,
++};
++
++static unsigned group1_pins[] = {
++      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned group2_pins[] = {
++      16, 17, 18, 19, 20, 21,
++};
++
++static unsigned group3_pins[] = {
++      8, 9, 10, 11, 12, 13, 14, 15,
++};
++
++static unsigned group4_pins[] = {
++      0, 1, 2, 3, 4, 5, 6, 7,
++};
++
++#define BCM6348_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      } \
++
++static struct bcm6348_pingroup bcm6348_groups[] = {
++      BCM6348_GROUP(group0),
++      BCM6348_GROUP(group1),
++      BCM6348_GROUP(group2),
++      BCM6348_GROUP(group3),
++      BCM6348_GROUP(group4),
++};
++
++static const char * const ext_mii_groups[] = {
++      "group0",
++      "group3",
++};
++
++static const char * const ext_ephy_groups[] = {
++      "group1",
++      "group4"
++};
++
++static const char * const mii_snoop_groups[] = {
++      "group1",
++      "group4",
++};
++
++static const char * const legacy_led_groups[] = {
++      "group4",
++};
++
++static const char * const mii_pccard_groups[] = {
++      "group1",
++};
++
++static const char * const pci_groups[] = {
++      "group2",
++};
++
++static const char * const spi_master_uart_groups[] = {
++      "group1",
++};
++
++static const char * const utopia_groups[] = {
++      "group0",
++      "group1",
++      "group3",
++};
++
++static const char * const diag_groups[] = {
++      "group0",
++      "group1",
++      "group2",
++      "group4",
++};
++
++#define BCM6348_FUN(n, f)                             \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .value = BCM6348_MUX_##f,               \
++      }
++
++static const struct bcm6348_function bcm6348_funcs[] = {
++      BCM6348_FUN(ext_mii, EXT_MII),
++      BCM6348_FUN(ext_ephy, EXT_EPHY),
++      BCM6348_FUN(mii_snoop, MII_SNOOP),
++      BCM6348_FUN(legacy_led, LEGACY_LED),
++      BCM6348_FUN(mii_pccard, MII_PCCARD),
++      BCM6348_FUN(pci, PCI),
++      BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
++      BCM6348_FUN(utopia, UTOPIA),
++      BCM6348_FUN(diag, DIAG),
++};
++
++static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6348_groups);
++}
++
++static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6348_groups[group].name;
++}
++
++static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6348_groups[group].pins;
++      *num_pins = bcm6348_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6348_funcs);
++}
++
++static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6348_funcs[selector].name;
++}
++
++static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6348_funcs[selector].groups;
++      *num_groups = bcm6348_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++
++      reg = __raw_readl(pctl->mode);
++      reg &= ~mask;
++      reg |= val & mask;
++      __raw_writel(reg, pctl->mode);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
++      const struct bcm6348_function *f = &bcm6348_funcs[selector];
++      u32 mask, val;
++
++      /*
++       * pins n..(n+7) share the same group, so we only need to look at
++       * the first pin.
++       */
++      mask = GROUP_MASK(grp->pins[0]);
++      val = f->value << GROUP_SHIFT(grp->pins[0]);
++
++      bcm6348_rmw_mux(pctl, mask, val);
++
++      return 0;
++}
++
++static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      struct pin_desc *desc;
++      u32 mask;
++
++      /* don't reconfigure if already muxed */
++      desc = pin_desc_get(pctldev, offset);
++      if (desc->mux_usecount)
++              return 0;
++
++      mask = GROUP_MASK(offset);
++
++      /* disable all functions using this pin */
++      bcm6348_rmw_mux(pctl, mask, 0);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6348_pctl_ops = {
++      .get_groups_count       = bcm6348_pinctrl_get_group_count,
++      .get_group_name         = bcm6348_pinctrl_get_group_name,
++      .get_group_pins         = bcm6348_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6348_pmx_ops = {
++      .get_functions_count    = bcm6348_pinctrl_get_func_count,
++      .get_function_name      = bcm6348_pinctrl_get_func_name,
++      .get_function_groups    = bcm6348_pinctrl_get_groups,
++      .set_mux                = bcm6348_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6348_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6348_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6348_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      /* disable all muxes by default */
++      __raw_writel(0, pctl->mode);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6348_pctl_ops;
++      pctl->desc.pmxops = &bcm6348_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
++      pctl->desc.pins = bcm6348_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6348_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6348_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6348-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6348_pinctrl_driver = {
++      .probe = bcm6348_pinctrl_probe,
++      .driver = {
++              .name = "bcm6348-pinctrl",
++              .of_match_table = bcm6348_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..e8a7479
--- /dev/null
@@ -0,0 +1,61 @@
+From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:00 +0200
+Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6358 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
+ 1 file changed, 44 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
+@@ -0,0 +1,44 @@
++* Broadcom BCM6358 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6358-pinctrl".
++- reg: Register specifiers of dirout, dat registers.
++- reg-names: Must be "dirout", "dat".
++- brcm,gpiomode: Phandle to the shared gpiomode register.
++- gpio-controller: Identifies this node as a gpio-controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@fffe0080 {
++      compatible = "brcm,bcm6358-pinctrl";
++      reg = <0xfffe0080 0x8>,
++            <0xfffe0088 0x8>,
++            <0xfffe0098 0x4>;
++      reg-names = "dirout", "dat";
++      brcm,gpiomode = <&gpiomode>;
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++gpiomode: syscon@fffe0098 {
++      compatible = "brcm,bcm6358-gpiomode", "syscon";
++      reg = <0xfffe0098 0x4>;
++      native-endian;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++ebi_cs_grp    30-31           ebi_cs
++uart1_grp     28-31           uart1
++spi_cs_grp    32-33           spi_cs
++async_modem_grp       12-15           async_modem
++legacy_led_grp        9-15            legacy_led
++serial_led_grp        6-7             serial_led
++led_grp               0-3             led
++utopia_grp    12-15, 22-31    utopia
++pwm_syn_clk_grp       8               pwm_syn_clk
++sys_irq_grp   5               sys_irq
diff --git a/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
new file mode 100644 (file)
index 0000000..87dc741
--- /dev/null
@@ -0,0 +1,436 @@
+From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:16:01 +0200
+Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
+
+Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
+functions onto the GPIO pins. It does not support configuring individual
+pins but only whole groups. These groups may overlap, and still require
+the directions to be set correctly in the GPIO register. In addition the
+functions register controls other, not directly mux related functions.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   8 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
+ 3 files changed, 402 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6358
++      bool "BCM6358 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++      select MFD_SYSCON
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
++obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
+@@ -0,0 +1,393 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/mfd/syscon.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/regmap.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++/* GPIO_MODE register */
++#define BCM6358_MODE_MUX_NONE         0
++
++/* overlays on gpio pins */
++#define BCM6358_MODE_MUX_EBI_CS               BIT(5)
++#define BCM6358_MODE_MUX_UART1                BIT(6)
++#define BCM6358_MODE_MUX_SPI_CS               BIT(7)
++#define BCM6358_MODE_MUX_ASYNC_MODEM  BIT(8)
++#define BCM6358_MODE_MUX_LEGACY_LED   BIT(9)
++#define BCM6358_MODE_MUX_SERIAL_LED   BIT(10)
++#define BCM6358_MODE_MUX_LED          BIT(11)
++#define BCM6358_MODE_MUX_UTOPIA               BIT(12)
++#define BCM6358_MODE_MUX_CLKRST               BIT(13)
++#define BCM6358_MODE_MUX_PWM_SYN_CLK  BIT(14)
++#define BCM6358_MODE_MUX_SYS_IRQ      BIT(15)
++
++#define BCM6358_NGPIO                 40
++
++struct bcm6358_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++
++      const u16 mode_val;
++
++      /* non-GPIO function muxes require the gpio direction to be set */
++      const u16 direction;
++};
++
++struct bcm6358_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++};
++
++struct bcm6358_pinctrl {
++      struct device *dev;
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      struct regmap_field *overlays;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)              \
++      {                                                       \
++              .number = a,                                    \
++              .name = b,                                      \
++              .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |  \
++                                   BCM6358_MODE_MUX_##bit2 |  \
++                                   BCM6358_MODE_MUX_##bit3),  \
++      }
++
++static const struct pinctrl_pin_desc bcm6358_pins[] = {
++      BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
++      PINCTRL_PIN(4, "gpio4"),
++      BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
++      BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
++      BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
++      BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
++      BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
++      BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
++      BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
++      BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++};
++
++static unsigned ebi_cs_grp_pins[] = { 30, 31 };
++
++static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
++
++static unsigned spi_cs_grp_pins[] = { 32, 33 };
++
++static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
++
++static unsigned serial_led_grp_pins[] = { 6, 7 };
++
++static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
++
++static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
++
++static unsigned utopia_grp_pins[] = {
++      12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned pwm_syn_clk_grp_pins[] = { 8 };
++
++static unsigned sys_irq_grp_pins[] = { 5 };
++
++#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)                   \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++              .mode_val = BCM6358_MODE_MUX_##bit,             \
++              .direction = dir,                               \
++      }
++
++static const struct bcm6358_pingroup bcm6358_groups[] = {
++      BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
++      BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
++      BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
++      BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
++      BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
++      BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
++      BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
++      BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
++      BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
++      BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
++};
++
++static const char * const ebi_cs_groups[] = {
++      "ebi_cs_grp"
++};
++
++static const char * const uart1_groups[] = {
++      "uart1_grp"
++};
++
++static const char * const spi_cs_2_3_groups[] = {
++      "spi_cs_2_3_grp"
++};
++
++static const char * const async_modem_groups[] = {
++      "async_modem_grp"
++};
++
++static const char * const legacy_led_groups[] = {
++      "legacy_led_grp",
++};
++
++static const char * const serial_led_groups[] = {
++      "serial_led_grp",
++};
++
++static const char * const led_groups[] = {
++      "led_grp",
++};
++
++static const char * const clkrst_groups[] = {
++      "clkrst_grp",
++};
++
++static const char * const pwm_syn_clk_groups[] = {
++      "pwm_syn_clk_grp",
++};
++
++static const char * const sys_irq_groups[] = {
++      "sys_irq_grp",
++};
++
++#define BCM6358_FUN(n)                                        \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++      }
++
++static const struct bcm6358_function bcm6358_funcs[] = {
++      BCM6358_FUN(ebi_cs),
++      BCM6358_FUN(uart1),
++      BCM6358_FUN(spi_cs_2_3),
++      BCM6358_FUN(async_modem),
++      BCM6358_FUN(legacy_led),
++      BCM6358_FUN(serial_led),
++      BCM6358_FUN(led),
++      BCM6358_FUN(clkrst),
++      BCM6358_FUN(pwm_syn_clk),
++      BCM6358_FUN(sys_irq),
++};
++
++static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6358_groups);
++}
++
++static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6358_groups[group].name;
++}
++
++static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6358_groups[group].pins;
++      *num_pins = bcm6358_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6358_funcs);
++}
++
++static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6358_funcs[selector].name;
++}
++
++static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6358_funcs[selector].groups;
++      *num_groups = bcm6358_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
++      u32 val = grp->mode_val;
++      u32 mask = val;
++      unsigned pin;
++
++      for (pin = 0; pin < grp->num_pins; pin++)
++              mask |= (unsigned long)bcm6358_pins[pin].drv_data;
++
++      regmap_field_update_bits(pctl->overlays, mask, val);
++
++      for (pin = 0; pin < grp->num_pins; pin++) {
++              int hw_gpio = bcm6358_pins[pin].number;
++              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
++
++              if (grp->direction & BIT(pin))
++                      gc->direction_output(gc, hw_gpio % 32, 0);
++              else
++                      gc->direction_input(gc, hw_gpio % 32);
++      }
++
++      return 0;
++}
++
++static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      u32 mask;
++
++      mask = (unsigned long)bcm6358_pins[offset].drv_data;
++      if (!mask)
++              return 0;
++
++      /* disable all functions using this pin */
++      return regmap_field_update_bits(pctl->overlays, mask, 0);
++}
++
++static struct pinctrl_ops bcm6358_pctl_ops = {
++      .get_groups_count       = bcm6358_pinctrl_get_group_count,
++      .get_group_name         = bcm6358_pinctrl_get_group_name,
++      .get_group_pins         = bcm6358_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6358_pmx_ops = {
++      .get_functions_count    = bcm6358_pinctrl_get_func_count,
++      .get_function_name      = bcm6358_pinctrl_get_func_name,
++      .get_function_groups    = bcm6358_pinctrl_get_groups,
++      .set_mux                = bcm6358_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6358_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6358_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6358_pinctrl *pctl;
++      struct regmap *mode;
++      struct reg_field overlays = REG_FIELD(0, 0, 15);
++
++      if (pdev->dev.of_node)
++              mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
++                                                     "brcm,gpiomode");
++      else
++              mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
++
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
++      if (IS_ERR(pctl->overlays))
++              return PTR_ERR(pctl->overlays);
++
++      /* disable all muxes by default */
++      regmap_field_write(pctl->overlays, 0);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6358_pctl_ops;
++      pctl->desc.pmxops = &bcm6358_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
++      pctl->desc.pins = bcm6358_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6358_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6358_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6358-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6358_pinctrl_driver = {
++      .probe = bcm6358_pinctrl_probe,
++      .driver = {
++              .name = "bcm6358-pinctrl",
++              .of_match_table = bcm6358_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..9fc424c
--- /dev/null
@@ -0,0 +1,96 @@
+From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:18 +0200
+Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6362 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
+ 1 file changed, 79 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
+@@ -0,0 +1,79 @@
++* Broadcom BCM6362 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6362-pinctrl"
++- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
++- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6362-pinctrl";
++      reg = <0x10000080 0x8>,
++            <0x10000088 0x8>,
++            <0x10000090 0x4>,
++            <0x10000098 0x4>,
++            <0x1000009c 0x4>,
++            <0x100000b8 0x4>;
++      reg-names = "dirout", "dat", "led",
++                  "mode", "ctrl", "basemode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++gpio0         0               led, usb_device_led
++gpio1         1               led, sys_irq
++gpio2         2               led, serial_led_clk
++gpio3         3               led, serial_led_data
++gpio4         4               led, robosw_led_data
++gpio5         5               led, robosw_led_clk
++gpio6         6               led, robosw_led0
++gpio7         7               led, robosw_led1
++gpio8         8               led, inet_led
++gpio9         9               led, spi_cs2
++gpio10                10              led, spi_cs3
++gpio11                11              led, ntr_pulse
++gpio12                12              led, uart1_scts
++gpio13                13              led, uart1_srts
++gpio14                14              led, uart1_sdin
++gpio15                15              led, uart1_sdout
++gpio16                16              led, adsl_spi_miso
++gpio17                17              led, adsl_spi_mosi
++gpio18                18              led, adsl_spi_clk
++gpio19                19              led, adsl_spi_cs
++gpio20                20              led, ephy0_led
++gpio21                21              led, ephy1_led
++gpio22                22              led, ephy2_led
++gpio23                23              led, ephy3_led
++gpio24                24              ext_irq0
++gpio25                25              ext_irq1
++gpio26                26              ext_irq2
++gpio27                27              ext_irq3
++gpio28                28              -
++gpio29                29              -
++gpio30                30              -
++gpio31                31              -
++gpio32                32              wifi
++gpio33                33              wifi
++gpio34                34              wifi
++gpio35                35              wifi
++gpio36                36              wifi
++gpio37                37              wifi
++gpio38                38              wifi
++gpio39                39              wifi
++gpio40                40              wifi
++gpio41                41              wifi
++gpio42                42              wifi
++gpio43                43              wifi
++gpio44                44              wifi
++gpio45                45              wifi
++gpio46                46              wifi
++gpio47                47              wifi
++nand_grp      8, 12-23, 27    nand
diff --git a/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..726a97f
--- /dev/null
@@ -0,0 +1,733 @@
+From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:17:20 +0200
+Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
+
+Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
+GPIO pins to the LED controller, to be available by the integrated
+wifi, or other functions. It also supports overlay groups, of which
+only NAND is documented.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
+ 3 files changed, 700 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
+       select MFD_SYSCON
++
++config PINCTRL_BCM6362
++      bool "BCM6362 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
++obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
+@@ -0,0 +1,692 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6362_NGPIO 48
++
++/* GPIO_BASEMODE register */
++#define BASEMODE_NAND BIT(2)
++
++enum bcm6362_pinctrl_reg {
++      BCM6362_LEDCTRL,
++      BCM6362_MODE,
++      BCM6362_CTRL,
++      BCM6362_BASEMODE,
++};
++
++struct bcm6362_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6362_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      enum bcm6362_pinctrl_reg reg;
++      u32 basemode_mask;
++};
++
++struct bcm6362_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *led;
++      void __iomem *mode;
++      void __iomem *ctrl;
++      void __iomem *basemode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6362_PIN(a, b, mask)                       \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)(mask),     \
++      }
++
++static const struct pinctrl_pin_desc bcm6362_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
++      BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
++      BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
++      BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
++      BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
++      BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
++      BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
++      BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
++      BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
++      BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
++      BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
++      BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++
++static unsigned nand_grp_pins[] = {
++      8, 12, 13, 14, 15, 16, 17,
++      18, 19, 20, 21, 22, 23, 27,
++};
++
++#define BCM6362_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      }
++
++static struct bcm6362_pingroup bcm6362_groups[] = {
++      BCM6362_GROUP(gpio0),
++      BCM6362_GROUP(gpio1),
++      BCM6362_GROUP(gpio2),
++      BCM6362_GROUP(gpio3),
++      BCM6362_GROUP(gpio4),
++      BCM6362_GROUP(gpio5),
++      BCM6362_GROUP(gpio6),
++      BCM6362_GROUP(gpio7),
++      BCM6362_GROUP(gpio8),
++      BCM6362_GROUP(gpio9),
++      BCM6362_GROUP(gpio10),
++      BCM6362_GROUP(gpio11),
++      BCM6362_GROUP(gpio12),
++      BCM6362_GROUP(gpio13),
++      BCM6362_GROUP(gpio14),
++      BCM6362_GROUP(gpio15),
++      BCM6362_GROUP(gpio16),
++      BCM6362_GROUP(gpio17),
++      BCM6362_GROUP(gpio18),
++      BCM6362_GROUP(gpio19),
++      BCM6362_GROUP(gpio20),
++      BCM6362_GROUP(gpio21),
++      BCM6362_GROUP(gpio22),
++      BCM6362_GROUP(gpio23),
++      BCM6362_GROUP(gpio24),
++      BCM6362_GROUP(gpio25),
++      BCM6362_GROUP(gpio26),
++      BCM6362_GROUP(gpio27),
++      BCM6362_GROUP(gpio28),
++      BCM6362_GROUP(gpio29),
++      BCM6362_GROUP(gpio30),
++      BCM6362_GROUP(gpio31),
++      BCM6362_GROUP(gpio32),
++      BCM6362_GROUP(gpio33),
++      BCM6362_GROUP(gpio34),
++      BCM6362_GROUP(gpio35),
++      BCM6362_GROUP(gpio36),
++      BCM6362_GROUP(gpio37),
++      BCM6362_GROUP(gpio38),
++      BCM6362_GROUP(gpio39),
++      BCM6362_GROUP(gpio40),
++      BCM6362_GROUP(gpio41),
++      BCM6362_GROUP(gpio42),
++      BCM6362_GROUP(gpio43),
++      BCM6362_GROUP(gpio44),
++      BCM6362_GROUP(gpio45),
++      BCM6362_GROUP(gpio46),
++      BCM6362_GROUP(gpio47),
++      BCM6362_GROUP(nand_grp),
++};
++
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio0",
++};
++
++static const char * const sys_irq_groups[] = {
++      "gpio1",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio2",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio3",
++};
++
++static const char * const robosw_led_data_groups[] = {
++      "gpio4",
++};
++
++static const char * const robosw_led_clk_groups[] = {
++      "gpio5",
++};
++
++static const char * const robosw_led0_groups[] = {
++      "gpio6",
++};
++
++static const char * const robosw_led1_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const spi_cs2_groups[] = {
++      "gpio9",
++};
++
++static const char * const spi_cs3_groups[] = {
++      "gpio10",
++};
++
++static const char * const ntr_pulse_groups[] = {
++      "gpio11",
++};
++
++static const char * const uart1_scts_groups[] = {
++      "gpio12",
++};
++
++static const char * const uart1_srts_groups[] = {
++      "gpio13",
++};
++
++static const char * const uart1_sdin_groups[] = {
++      "gpio14",
++};
++
++static const char * const uart1_sdout_groups[] = {
++      "gpio15",
++};
++
++static const char * const adsl_spi_miso_groups[] = {
++      "gpio16",
++};
++
++static const char * const adsl_spi_mosi_groups[] = {
++      "gpio17",
++};
++
++static const char * const adsl_spi_clk_groups[] = {
++      "gpio18",
++};
++
++static const char * const adsl_spi_cs_groups[] = {
++      "gpio19",
++};
++
++static const char * const ephy0_led_groups[] = {
++      "gpio20",
++};
++
++static const char * const ephy1_led_groups[] = {
++      "gpio21",
++};
++
++static const char * const ephy2_led_groups[] = {
++      "gpio22",
++};
++
++static const char * const ephy3_led_groups[] = {
++      "gpio23",
++};
++
++static const char * const ext_irq0_groups[] = {
++      "gpio24",
++};
++
++static const char * const ext_irq1_groups[] = {
++      "gpio25",
++};
++
++static const char * const ext_irq2_groups[] = {
++      "gpio26",
++};
++
++static const char * const ext_irq3_groups[] = {
++      "gpio27",
++};
++
++static const char * const wifi_groups[] = {
++      "gpio32",
++      "gpio33",
++      "gpio34",
++      "gpio35",
++      "gpio36",
++      "gpio37",
++      "gpio38",
++      "gpio39",
++      "gpio40",
++      "gpio41",
++      "gpio42",
++      "gpio43",
++      "gpio44",
++      "gpio45",
++      "gpio46",
++      "gpio47",
++};
++
++static const char * const nand_groups[] = {
++      "nand_grp",
++};
++
++#define BCM6362_LED_FUN(n)                            \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_LEDCTRL,                 \
++      }
++
++#define BCM6362_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_MODE,                    \
++      }
++
++#define BCM6362_CTRL_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_CTRL,                    \
++      }
++
++#define BCM6362_BASEMODE_FUN(n, mask)                 \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_BASEMODE,                \
++              .basemode_mask = (mask),                \
++      }
++
++static const struct bcm6362_function bcm6362_funcs[] = {
++      BCM6362_LED_FUN(led),
++      BCM6362_MODE_FUN(usb_device_led),
++      BCM6362_MODE_FUN(sys_irq),
++      BCM6362_MODE_FUN(serial_led_clk),
++      BCM6362_MODE_FUN(serial_led_data),
++      BCM6362_MODE_FUN(robosw_led_data),
++      BCM6362_MODE_FUN(robosw_led_clk),
++      BCM6362_MODE_FUN(robosw_led0),
++      BCM6362_MODE_FUN(robosw_led1),
++      BCM6362_MODE_FUN(inet_led),
++      BCM6362_MODE_FUN(spi_cs2),
++      BCM6362_MODE_FUN(spi_cs3),
++      BCM6362_MODE_FUN(ntr_pulse),
++      BCM6362_MODE_FUN(uart1_scts),
++      BCM6362_MODE_FUN(uart1_srts),
++      BCM6362_MODE_FUN(uart1_sdin),
++      BCM6362_MODE_FUN(uart1_sdout),
++      BCM6362_MODE_FUN(adsl_spi_miso),
++      BCM6362_MODE_FUN(adsl_spi_mosi),
++      BCM6362_MODE_FUN(adsl_spi_clk),
++      BCM6362_MODE_FUN(adsl_spi_cs),
++      BCM6362_MODE_FUN(ephy0_led),
++      BCM6362_MODE_FUN(ephy1_led),
++      BCM6362_MODE_FUN(ephy2_led),
++      BCM6362_MODE_FUN(ephy3_led),
++      BCM6362_MODE_FUN(ext_irq0),
++      BCM6362_MODE_FUN(ext_irq1),
++      BCM6362_MODE_FUN(ext_irq2),
++      BCM6362_MODE_FUN(ext_irq3),
++      BCM6362_CTRL_FUN(wifi),
++      BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
++};
++
++static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6362_groups);
++}
++
++static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6362_groups[group].name;
++}
++
++static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6362_groups[group].pins;
++      *num_pins = bcm6362_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6362_funcs);
++}
++
++static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6362_funcs[selector].name;
++}
++
++static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6362_funcs[selector].groups;
++      *num_groups = bcm6362_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
++                          u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 tmp;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= val & mask;
++      __raw_writel(tmp, reg);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
++{
++      const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
++      u32 mask = BIT(pin % 32);
++
++      if (desc->drv_data)
++              bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
++
++      if (pin < 32) {
++              /* base mode 0 => gpio 1 => mux function */
++              bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
++
++              /* pins 0-23 might be muxed to led */
++              if (pin < 24)
++                      bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
++      } else {
++              /* ctrl reg 0 => wifi function 1 => gpio */
++              bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
++      }
++}
++
++static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
++      const struct bcm6362_function *f = &bcm6362_funcs[selector];
++      unsigned i;
++      void __iomem *reg;
++      u32 val, mask;
++
++      for (i = 0; i < grp->num_pins; i++)
++              bcm6362_set_gpio(pctl, grp->pins[i]);
++
++      switch (f->reg) {
++      case BCM6362_LEDCTRL:
++              reg = pctl->led;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM6362_MODE:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM6362_CTRL:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = 0;
++              break;
++      case BCM6362_BASEMODE:
++              reg = pctl->basemode;
++              mask = f->basemode_mask;
++              val = f->basemode_mask;
++              break;
++      default:
++              WARN_ON(1);
++              return -EINVAL;
++      }
++
++      bcm6362_rmw_mux(pctl, reg, mask, val);
++
++      return 0;
++}
++
++static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm6362_set_gpio(pctl, offset);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6362_pctl_ops = {
++      .get_groups_count       = bcm6362_pinctrl_get_group_count,
++      .get_group_name         = bcm6362_pinctrl_get_group_name,
++      .get_group_pins         = bcm6362_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6362_pmx_ops = {
++      .get_functions_count    = bcm6362_pinctrl_get_func_count,
++      .get_function_name      = bcm6362_pinctrl_get_func_name,
++      .get_function_groups    = bcm6362_pinctrl_get_groups,
++      .set_mux                = bcm6362_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6362_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6362_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6362_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *led, *mode, *ctrl, *basemode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
++      led = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(led))
++              return PTR_ERR(led);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
++      ctrl = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(ctrl))
++              return PTR_ERR(ctrl);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
++      basemode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->led = led;
++      pctl->mode = mode;
++      pctl->ctrl = ctrl;
++      pctl->basemode = basemode;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6362_pctl_ops;
++      pctl->desc.pmxops = &bcm6362_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
++      pctl->desc.pins = bcm6362_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6362_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6362_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6362-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6362_pinctrl_driver = {
++      .probe = bcm6362_pinctrl_probe,
++      .driver = {
++              .name = "bcm6362-pinctrl",
++              .of_match_table = bcm6362_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..e0a698f
--- /dev/null
@@ -0,0 +1,84 @@
+From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:51 +0200
+Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6368 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
+ 1 file changed, 67 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
+@@ -0,0 +1,67 @@
++* Broadcom BCM6368 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6368-pinctrl".
++- reg: Register specifiers of dirout, dat, mode registers.
++- reg-names: Must be "dirout", "dat", "mode".
++- brcm,gpiobasemode: Phandle to the gpio basemode register.
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6368-pinctrl";
++      reg = <0x10000080 0x08>,
++            <0x10000088 0x08>,
++            <0x10000098 0x04>;
++      reg-names = "dirout", "dat", "mode";
++      brcm,gpiobasemode = <&gpiobasemode>;
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++gpiobasemode: syscon@100000b8 {
++      compatible = "brcm,bcm6368-gpiobasemode", "syscon";
++      reg = <0x100000b8 4>;
++      native-endian;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       analog_afe0
++gpio1         1       analog_afe1
++gpio2         2       sys_irq
++gpio3         3       serial_led_data
++gpio4         4       serial_led_clk
++gpio5         5       inet_led
++gpio6         6       ephy0_led
++gpio7         7       ephy1_led
++gpio8         8       ephy2_led
++gpio9         9       ephy3_led
++gpio10                10      robosw_led_data
++gpio11                11      robosw_led_clk
++gpio12                12      robosw_led0
++gpio13                13      robosw_led1
++gpio14                14      usb_device_led
++gpio15                15      -
++gpio16                16      pci_req1
++gpio17                17      pci_gnt1
++gpio18                18      pci_intb
++gpio19                19      pci_req0
++gpio20                20      pci_gnt0
++gpio21                21      -
++gpio22                22      pcmcia_cd1
++gpio23                23      pcmcia_cd2
++gpio24                24      pcmcia_vs1
++gpio25                25      pcmcia_vs2
++gpio26                26      ebi_cs2
++gpio27                27      ebi_cs3
++gpio28                28      spi_cs2
++gpio29                29      spi_cs3
++gpio30                30      spi_cs4
++gpio31                31      spi_cs5
++uart1_grp     30-33   uart1
diff --git a/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
new file mode 100644 (file)
index 0000000..6a9b9e0
--- /dev/null
@@ -0,0 +1,620 @@
+From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:18:25 +0200
+Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
+
+Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
+GPIOs onto alternative functions. Not all are documented.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |  15 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
+ 3 files changed, 589 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6368
++      bool "BCM6368 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++      select MFD_SYSCON
++
++config PINCTRL_BCM63268
++      bool "BCM63268 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+ obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
++obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
+@@ -0,0 +1,573 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/mfd/syscon.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_gpio.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6368_NGPIO 38
++
++#define BCM6368_BASEMODE_MASK 0x7
++#define BCM6368_BASEMODE_GPIO 0x0
++#define BCM6368_BASEMODE_UART1        0x1
++
++struct bcm6368_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6368_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned dir_out:16;
++      unsigned basemode:3;
++};
++
++struct bcm6368_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      struct regmap_field *overlay;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6368_BASEMODE_PIN(a, b)            \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)true        \
++      }
++
++static const struct pinctrl_pin_desc bcm6368_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      BCM6368_BASEMODE_PIN(30, "gpio30"),
++      BCM6368_BASEMODE_PIN(31, "gpio31"),
++      BCM6368_BASEMODE_PIN(32, "gpio32"),
++      BCM6368_BASEMODE_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
++
++#define BCM6368_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      }
++
++static struct bcm6368_pingroup bcm6368_groups[] = {
++      BCM6368_GROUP(gpio0),
++      BCM6368_GROUP(gpio1),
++      BCM6368_GROUP(gpio2),
++      BCM6368_GROUP(gpio3),
++      BCM6368_GROUP(gpio4),
++      BCM6368_GROUP(gpio5),
++      BCM6368_GROUP(gpio6),
++      BCM6368_GROUP(gpio7),
++      BCM6368_GROUP(gpio8),
++      BCM6368_GROUP(gpio9),
++      BCM6368_GROUP(gpio10),
++      BCM6368_GROUP(gpio11),
++      BCM6368_GROUP(gpio12),
++      BCM6368_GROUP(gpio13),
++      BCM6368_GROUP(gpio14),
++      BCM6368_GROUP(gpio15),
++      BCM6368_GROUP(gpio16),
++      BCM6368_GROUP(gpio17),
++      BCM6368_GROUP(gpio18),
++      BCM6368_GROUP(gpio19),
++      BCM6368_GROUP(gpio20),
++      BCM6368_GROUP(gpio21),
++      BCM6368_GROUP(gpio22),
++      BCM6368_GROUP(gpio23),
++      BCM6368_GROUP(gpio24),
++      BCM6368_GROUP(gpio25),
++      BCM6368_GROUP(gpio26),
++      BCM6368_GROUP(gpio27),
++      BCM6368_GROUP(gpio28),
++      BCM6368_GROUP(gpio29),
++      BCM6368_GROUP(gpio30),
++      BCM6368_GROUP(gpio31),
++      BCM6368_GROUP(uart1_grp),
++};
++
++static const char * const analog_afe_0_groups[] = {
++      "gpio0",
++};
++
++static const char * const analog_afe_1_groups[] = {
++      "gpio1",
++};
++
++static const char * const sys_irq_groups[] = {
++      "gpio2",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio3",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio4",
++};
++
++static const char * const inet_led_groups[] = {
++      "gpio5",
++};
++
++static const char * const ephy0_led_groups[] = {
++      "gpio6",
++};
++
++static const char * const ephy1_led_groups[] = {
++      "gpio7",
++};
++
++static const char * const ephy2_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const ephy3_led_groups[] = {
++      "gpio9",
++};
++
++static const char * const robosw_led_data_groups[] = {
++      "gpio10",
++};
++
++static const char * const robosw_led_clk_groups[] = {
++      "gpio11",
++};
++
++static const char * const robosw_led0_groups[] = {
++      "gpio12",
++};
++
++static const char * const robosw_led1_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio14",
++};
++
++static const char * const pci_req1_groups[] = {
++      "gpio16",
++};
++
++static const char * const pci_gnt1_groups[] = {
++      "gpio17",
++};
++
++static const char * const pci_intb_groups[] = {
++      "gpio18",
++};
++
++static const char * const pci_req0_groups[] = {
++      "gpio19",
++};
++
++static const char * const pci_gnt0_groups[] = {
++      "gpio20",
++};
++
++static const char * const pcmcia_cd1_groups[] = {
++      "gpio22",
++};
++
++static const char * const pcmcia_cd2_groups[] = {
++      "gpio23",
++};
++
++static const char * const pcmcia_vs1_groups[] = {
++      "gpio24",
++};
++
++static const char * const pcmcia_vs2_groups[] = {
++      "gpio25",
++};
++
++static const char * const ebi_cs2_groups[] = {
++      "gpio26",
++};
++
++static const char * const ebi_cs3_groups[] = {
++      "gpio27",
++};
++
++static const char * const spi_cs2_groups[] = {
++      "gpio28",
++};
++
++static const char * const spi_cs3_groups[] = {
++      "gpio29",
++};
++
++static const char * const spi_cs4_groups[] = {
++      "gpio30",
++};
++
++static const char * const spi_cs5_groups[] = {
++      "gpio31",
++};
++
++static const char * const uart1_groups[] = {
++      "uart1_grp",
++};
++
++#define BCM6368_FUN(n, out)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .dir_out = out,                         \
++      }
++
++#define BCM6368_BASEMODE_FUN(n, val, out)             \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .basemode = BCM6368_BASEMODE_##val,     \
++              .dir_out = out,                         \
++      }
++
++static const struct bcm6368_function bcm6368_funcs[] = {
++      BCM6368_FUN(analog_afe_0, 1),
++      BCM6368_FUN(analog_afe_1, 1),
++      BCM6368_FUN(sys_irq, 1),
++      BCM6368_FUN(serial_led_data, 1),
++      BCM6368_FUN(serial_led_clk, 1),
++      BCM6368_FUN(inet_led, 1),
++      BCM6368_FUN(ephy0_led, 1),
++      BCM6368_FUN(ephy1_led, 1),
++      BCM6368_FUN(ephy2_led, 1),
++      BCM6368_FUN(ephy3_led, 1),
++      BCM6368_FUN(robosw_led_data, 1),
++      BCM6368_FUN(robosw_led_clk, 1),
++      BCM6368_FUN(robosw_led0, 1),
++      BCM6368_FUN(robosw_led1, 1),
++      BCM6368_FUN(usb_device_led, 1),
++      BCM6368_FUN(pci_req1, 0),
++      BCM6368_FUN(pci_gnt1, 0),
++      BCM6368_FUN(pci_intb, 0),
++      BCM6368_FUN(pci_req0, 0),
++      BCM6368_FUN(pci_gnt0, 0),
++      BCM6368_FUN(pcmcia_cd1, 0),
++      BCM6368_FUN(pcmcia_cd2, 0),
++      BCM6368_FUN(pcmcia_vs1, 0),
++      BCM6368_FUN(pcmcia_vs2, 0),
++      BCM6368_FUN(ebi_cs2, 1),
++      BCM6368_FUN(ebi_cs3, 1),
++      BCM6368_FUN(spi_cs2, 1),
++      BCM6368_FUN(spi_cs3, 1),
++      BCM6368_FUN(spi_cs4, 1),
++      BCM6368_FUN(spi_cs5, 1),
++      BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
++};
++
++static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6368_groups);
++}
++
++static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6368_groups[group].name;
++}
++
++static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6368_groups[group].pins;
++      *num_pins = bcm6368_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6368_funcs);
++}
++
++static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6368_funcs[selector].name;
++}
++
++static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6368_funcs[selector].groups;
++      *num_groups = bcm6368_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
++                          u32 mask, u32 val)
++{
++      u32 tmp;
++
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= (val & mask);
++      __raw_writel(tmp, reg);
++}
++
++static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
++      const struct bcm6368_function *fun = &bcm6368_funcs[selector];
++      unsigned long flags;
++      int i, pin;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (fun->basemode) {
++              u32 mask = 0;
++
++              for (i = 0; i < grp->num_pins; i++) {
++                      pin = grp->pins[i];
++                      if (pin < 32)
++                              mask |= BIT(pin);
++              }
++
++              bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
++              regmap_field_write(pctl->overlay, fun->basemode);
++      } else {
++              pin = grp->pins[0];
++
++              if (bcm6368_pins[pin].drv_data)
++                      regmap_field_write(pctl->overlay,
++                                         BCM6368_BASEMODE_GPIO);
++
++              bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
++      }
++      spin_unlock_irqrestore(&pctl->lock, flags);
++
++      for (pin = 0; pin < grp->num_pins; pin++) {
++              int hw_gpio = bcm6368_pins[pin].number;
++              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
++
++              if (fun->dir_out & BIT(pin))
++                      gc->direction_output(gc, hw_gpio % 32, 0);
++              else
++                      gc->direction_input(gc, hw_gpio % 32);
++      }
++
++      return 0;
++}
++
++static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      unsigned long flags;
++
++      if (offset >= 32 && !bcm6368_pins[offset].drv_data)
++              return 0;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      /* disable all functions using this pin */
++      if (offset < 32)
++              bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
++
++      if (bcm6368_pins[offset].drv_data)
++              regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6368_pctl_ops = {
++      .get_groups_count       = bcm6368_pinctrl_get_group_count,
++      .get_group_name         = bcm6368_pinctrl_get_group_name,
++      .get_group_pins         = bcm6368_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6368_pmx_ops = {
++      .get_functions_count    = bcm6368_pinctrl_get_func_count,
++      .get_function_name      = bcm6368_pinctrl_get_func_name,
++      .get_function_groups    = bcm6368_pinctrl_get_groups,
++      .set_mux                = bcm6368_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6368_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6368_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6368_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode;
++      struct regmap *basemode;
++      struct reg_field overlay = REG_FIELD(0, 0, 3);
++
++      if (pdev->dev.of_node)
++              basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
++                                                         "brcm,gpiobasemode");
++      else
++              basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
++
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
++      if (IS_ERR(pctl->overlay))
++              return PTR_ERR(pctl->overlay);
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      /* disable all muxes by default */
++      __raw_writel(0, pctl->mode);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6368_pctl_ops;
++      pctl->desc.pmxops = &bcm6368_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
++      pctl->desc.pins = bcm6368_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6368_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6368_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6368-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6368_pinctrl_driver = {
++      .probe = bcm6368_pinctrl_probe,
++      .driver = {
++              .name = "bcm6368-pinctrl",
++              .of_match_table = bcm6368_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
new file mode 100644 (file)
index 0000000..ffe842f
--- /dev/null
@@ -0,0 +1,106 @@
+From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:37:08 +0200
+Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in the BCM63268
+family SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
+ 1 file changed, 88 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
+@@ -0,0 +1,88 @@
++* Broadcom BCM63268 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6362-pinctrl".
++- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
++- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@100000c0 {
++      compatible = "brcm,bcm63268-pinctrl";
++      reg = <0x100000c0 0x8>,
++            <0x100000c8 0x8>,
++            <0x100000d0 0x4>,
++            <0x100000d8 0x4>,
++            <0x100000dc 0x4>,
++            <0x100000f8 0x4>;
++      reg-names = "dirout", "dat", "led", "mode",
++                  "ctrl", "basemode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++gpio0         0               led, serial_led_clk
++gpio1         1               led, serial_led_data
++gpio2         2               led,
++gpio3         3               led,
++gpio4         4               led,
++gpio5         5               led,
++gpio6         6               led,
++gpio7         7               led,
++gpio8         8               led, hsspi_cs6
++gpio9         9               led, hsspi_cs7
++gpio10                10              led, uart1_scts
++gpio11                11              led, uart1_srts
++gpio12                12              led, uart1_sdin
++gpio13                13              led, uart1_sdout
++gpio14                14              led, ntr_pulse_in
++gpio15                15              led, dsl_ntr_pulse_out
++gpio16                16              led, hsspi_cs4
++gpio17                17              led, hsspi_cs5
++gpio18                18              led, adsl_spi_miso
++gpio19                19              led, adsl_spi_mosi
++gpio20                20              led,
++gpio21                21              led,
++gpio22                22              led, vreg_clk
++gpio23                23              led, pcie_clkreq_b
++gpio24                24              uart1_scts
++gpio25                25              uart1_srts
++gpio26                26              uart1_sdin
++gpio27                27              uart1_sdout
++gpio28                28              ntr_pulse_in
++gpio29                29              dsl_ntr_pulse_out
++gpio30                30              switch_led_clk
++gpio31                31              switch_led_data
++gpio32                32              wifi
++gpio33                33              wifi
++gpio34                34              wifi
++gpio35                35              wifi
++gpio36                36              wifi
++gpio37                37              wifi
++gpio38                38              wifi
++gpio39                39              wifi
++gpio40                40              wifi
++gpio41                41              wifi
++gpio42                42              wifi
++gpio43                43              wifi
++gpio44                44              wifi
++gpio45                45              wifi
++gpio46                46              wifi
++gpio47                47              wifi
++gpio48                48              wifi
++gpio49                49              wifi
++gpio50                50              wifi
++gpio51                51              wifi
++nand_grp      2-7,24-31       nand
++dect_pd_grp   8-9             dect_pd
++vdsl_phy0_grp 10-11           vdsl_phy0
++vdsl_phy1_grp 12-13           vdsl_phy1
++vdsl_phy2_grp 24-25           vdsl_phy2
++vdsl_phy3_grp 26-27           vdsl_phy3
diff --git a/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..089d14e
--- /dev/null
@@ -0,0 +1,736 @@
+From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:19:12 +0200
+Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
+
+Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
+to different functions. Depending on the mux, these are either single
+pin configurations or whole pin groups.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Makefile           |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
+ 2 files changed, 711 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
+
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+ obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+ obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
++obj-$(CONFIG_PINCTRL_BCM63268)        += pinctrl-bcm63268.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
+@@ -0,0 +1,710 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM63268_NGPIO                        52
++
++/* GPIO_BASEMODE register */
++#define BASEMODE_NAND                 BIT(2) /* GPIOs 2-7, 24-31 */
++#define BASEMODE_GPIO35                       BIT(4) /* GPIO 35 */
++#define BASEMODE_DECTPD                       BIT(5) /* GPIOs 8/9 */
++#define BASEMODE_VDSL_PHY_0           BIT(6) /* GPIOs 10/11 */
++#define BASEMODE_VDSL_PHY_1           BIT(7) /* GPIOs 12/13 */
++#define BASEMODE_VDSL_PHY_2           BIT(8) /* GPIOs 24/25 */
++#define BASEMODE_VDSL_PHY_3           BIT(9) /* GPIOs 26/27 */
++
++enum bcm63268_pinctrl_reg {
++      BCM63268_LEDCTRL,
++      BCM63268_MODE,
++      BCM63268_CTRL,
++      BCM63268_BASEMODE,
++};
++
++struct bcm63268_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm63268_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      enum bcm63268_pinctrl_reg reg;
++      u32 mask;
++};
++
++struct bcm63268_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *led;
++      void __iomem *mode;
++      void __iomem *ctrl;
++      void __iomem *basemode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM63268_PIN(a, b, basemode)                  \
++      {                                               \
++              .number = a,                            \
++              .name = b,                              \
++              .drv_data = (void *)(basemode)          \
++      }
++
++static const struct pinctrl_pin_desc bcm63268_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
++      BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
++      BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
++      BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
++      BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
++      BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
++      BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
++      BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
++      BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
++      BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
++      BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
++      BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
++      BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
++      BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
++      BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
++      BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
++      BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
++      BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
++      BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++      PINCTRL_PIN(48, "gpio48"),
++      PINCTRL_PIN(49, "gpio49"),
++      PINCTRL_PIN(50, "gpio50"),
++      PINCTRL_PIN(51, "gpio51"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++static unsigned gpio48_pins[] = { 48 };
++static unsigned gpio49_pins[] = { 49 };
++static unsigned gpio50_pins[] = { 50 };
++static unsigned gpio51_pins[] = { 51 };
++
++static unsigned nand_grp_pins[] = {
++      2, 3, 4, 5, 6, 7, 24,
++      25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned dectpd_grp_pins[] = { 8, 9 };
++static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
++static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
++static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
++static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
++
++#define BCM63268_GROUP(n)                                     \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm63268_pingroup bcm63268_groups[] = {
++      BCM63268_GROUP(gpio0),
++      BCM63268_GROUP(gpio1),
++      BCM63268_GROUP(gpio2),
++      BCM63268_GROUP(gpio3),
++      BCM63268_GROUP(gpio4),
++      BCM63268_GROUP(gpio5),
++      BCM63268_GROUP(gpio6),
++      BCM63268_GROUP(gpio7),
++      BCM63268_GROUP(gpio8),
++      BCM63268_GROUP(gpio9),
++      BCM63268_GROUP(gpio10),
++      BCM63268_GROUP(gpio11),
++      BCM63268_GROUP(gpio12),
++      BCM63268_GROUP(gpio13),
++      BCM63268_GROUP(gpio14),
++      BCM63268_GROUP(gpio15),
++      BCM63268_GROUP(gpio16),
++      BCM63268_GROUP(gpio17),
++      BCM63268_GROUP(gpio18),
++      BCM63268_GROUP(gpio19),
++      BCM63268_GROUP(gpio20),
++      BCM63268_GROUP(gpio21),
++      BCM63268_GROUP(gpio22),
++      BCM63268_GROUP(gpio23),
++      BCM63268_GROUP(gpio24),
++      BCM63268_GROUP(gpio25),
++      BCM63268_GROUP(gpio26),
++      BCM63268_GROUP(gpio27),
++      BCM63268_GROUP(gpio28),
++      BCM63268_GROUP(gpio29),
++      BCM63268_GROUP(gpio30),
++      BCM63268_GROUP(gpio31),
++      BCM63268_GROUP(gpio32),
++      BCM63268_GROUP(gpio33),
++      BCM63268_GROUP(gpio34),
++      BCM63268_GROUP(gpio35),
++      BCM63268_GROUP(gpio36),
++      BCM63268_GROUP(gpio37),
++      BCM63268_GROUP(gpio38),
++      BCM63268_GROUP(gpio39),
++      BCM63268_GROUP(gpio40),
++      BCM63268_GROUP(gpio41),
++      BCM63268_GROUP(gpio42),
++      BCM63268_GROUP(gpio43),
++      BCM63268_GROUP(gpio44),
++      BCM63268_GROUP(gpio45),
++      BCM63268_GROUP(gpio46),
++      BCM63268_GROUP(gpio47),
++      BCM63268_GROUP(gpio48),
++      BCM63268_GROUP(gpio49),
++      BCM63268_GROUP(gpio50),
++      BCM63268_GROUP(gpio51),
++
++      /* multi pin groups */
++      BCM63268_GROUP(nand_grp),
++      BCM63268_GROUP(dectpd_grp),
++      BCM63268_GROUP(vdsl_phy0_grp),
++      BCM63268_GROUP(vdsl_phy1_grp),
++      BCM63268_GROUP(vdsl_phy2_grp),
++      BCM63268_GROUP(vdsl_phy3_grp),
++};
++
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio0",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio1",
++};
++
++static const char * const hsspi_cs4_groups[] = {
++      "gpio16",
++};
++
++static const char * const hsspi_cs5_groups[] = {
++      "gpio17",
++};
++
++static const char * const hsspi_cs6_groups[] = {
++      "gpio8",
++};
++
++static const char * const hsspi_cs7_groups[] = {
++      "gpio9",
++};
++
++static const char * const uart1_scts_groups[] = {
++      "gpio10",
++      "gpio24",
++};
++
++static const char * const uart1_srts_groups[] = {
++      "gpio11",
++      "gpio25",
++};
++
++static const char * const uart1_sdin_groups[] = {
++      "gpio12",
++      "gpio26",
++};
++
++static const char * const uart1_sdout_groups[] = {
++      "gpio13",
++      "gpio27",
++};
++
++static const char * const ntr_pulse_in_groups[] = {
++      "gpio14",
++      "gpio28",
++};
++
++static const char * const dsl_ntr_pulse_out_groups[] = {
++      "gpio15",
++      "gpio29",
++};
++
++static const char * const adsl_spi_miso_groups[] = {
++      "gpio18",
++};
++
++static const char * const adsl_spi_mosi_groups[] = {
++      "gpio19",
++};
++
++static const char * const vreg_clk_groups[] = {
++      "gpio22",
++};
++
++static const char * const pcie_clkreq_b_groups[] = {
++      "gpio23",
++};
++
++static const char * const switch_led_clk_groups[] = {
++      "gpio30",
++};
++
++static const char * const switch_led_data_groups[] = {
++      "gpio31",
++};
++
++static const char * const wifi_groups[] = {
++      "gpio32",
++      "gpio33",
++      "gpio34",
++      "gpio35",
++      "gpio36",
++      "gpio37",
++      "gpio38",
++      "gpio39",
++      "gpio40",
++      "gpio41",
++      "gpio42",
++      "gpio43",
++      "gpio44",
++      "gpio45",
++      "gpio46",
++      "gpio47",
++      "gpio48",
++      "gpio49",
++      "gpio50",
++      "gpio51",
++};
++
++static const char * const nand_groups[] = {
++      "nand_grp",
++};
++
++static const char * const dectpd_groups[] = {
++      "dectpd_grp",
++};
++
++static const char * const vdsl_phy_override_0_groups[] = {
++      "vdsl_phy_override_0_grp",
++};
++
++static const char * const vdsl_phy_override_1_groups[] = {
++      "vdsl_phy_override_1_grp",
++};
++
++static const char * const vdsl_phy_override_2_groups[] = {
++      "vdsl_phy_override_2_grp",
++};
++
++static const char * const vdsl_phy_override_3_groups[] = {
++      "vdsl_phy_override_3_grp",
++};
++
++#define BCM63268_LED_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_LEDCTRL,                \
++      }
++
++#define BCM63268_MODE_FUN(n)                          \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_MODE,                   \
++      }
++
++#define BCM63268_CTRL_FUN(n)                          \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_CTRL,                   \
++      }
++
++#define BCM63268_BASEMODE_FUN(n, val)                 \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_BASEMODE,               \
++              .mask = val,                            \
++      }
++
++static const struct bcm63268_function bcm63268_funcs[] = {
++      BCM63268_LED_FUN(led),
++      BCM63268_MODE_FUN(serial_led_clk),
++      BCM63268_MODE_FUN(serial_led_data),
++      BCM63268_MODE_FUN(hsspi_cs6),
++      BCM63268_MODE_FUN(hsspi_cs7),
++      BCM63268_MODE_FUN(uart1_scts),
++      BCM63268_MODE_FUN(uart1_srts),
++      BCM63268_MODE_FUN(uart1_sdin),
++      BCM63268_MODE_FUN(uart1_sdout),
++      BCM63268_MODE_FUN(ntr_pulse_in),
++      BCM63268_MODE_FUN(dsl_ntr_pulse_out),
++      BCM63268_MODE_FUN(hsspi_cs4),
++      BCM63268_MODE_FUN(hsspi_cs5),
++      BCM63268_MODE_FUN(adsl_spi_miso),
++      BCM63268_MODE_FUN(adsl_spi_mosi),
++      BCM63268_MODE_FUN(vreg_clk),
++      BCM63268_MODE_FUN(pcie_clkreq_b),
++      BCM63268_MODE_FUN(switch_led_clk),
++      BCM63268_MODE_FUN(switch_led_data),
++      BCM63268_CTRL_FUN(wifi),
++      BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
++      BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
++};
++
++static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm63268_groups);
++}
++
++static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                 unsigned group)
++{
++      return bcm63268_groups[group].name;
++}
++
++static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                         unsigned group,
++                                         const unsigned **pins,
++                                         unsigned *num_pins)
++{
++      *pins = bcm63268_groups[group].pins;
++      *num_pins = bcm63268_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm63268_funcs);
++}
++
++static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                                unsigned selector)
++{
++      return bcm63268_funcs[selector].name;
++}
++
++static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                     unsigned selector,
++                                     const char * const **groups,
++                                     unsigned * const num_groups)
++{
++      *groups = bcm63268_funcs[selector].groups;
++      *num_groups = bcm63268_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
++                           u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 tmp;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= val;
++      __raw_writel(tmp, reg);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
++{
++      const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
++      u32 basemode = (unsigned long)desc->drv_data;
++      u32 mask = BIT(pin % 32);
++
++      if (basemode)
++              bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
++
++      if (pin < 32) {
++              /* base mode: 0 => gpio, 1 => mux function */
++              bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
++
++              /* pins 0-23 might be muxed to led */
++              if (pin < 24)
++                      bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
++      } else if (pin < 52) {
++              /* ctrl reg: 0 => wifi function, 1 => gpio */
++              bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
++      }
++}
++
++static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                  unsigned selector, unsigned group)
++{
++      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
++      const struct bcm63268_function *f = &bcm63268_funcs[selector];
++      unsigned i;
++      void __iomem *reg;
++      u32 val, mask;
++
++      for (i = 0; i < grp->num_pins; i++)
++              bcm63268_set_gpio(pctl, grp->pins[i]);
++
++      switch (f->reg) {
++      case BCM63268_LEDCTRL:
++              reg = pctl->led;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM63268_MODE:
++              reg = pctl->mode;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM63268_CTRL:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = 0;
++              break;
++      case BCM63268_BASEMODE:
++              reg = pctl->basemode;
++              mask = f->mask;
++              val = f->mask;
++              break;
++      default:
++              WARN_ON(1);
++              return -EINVAL;
++      }
++
++      bcm63268_rmw_mux(pctl, reg, mask, val);
++
++      return 0;
++}
++
++static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                      struct pinctrl_gpio_range *range,
++                                      unsigned offset)
++{
++      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm63268_set_gpio(pctl, offset);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm63268_pctl_ops = {
++      .get_groups_count       = bcm63268_pinctrl_get_group_count,
++      .get_group_name         = bcm63268_pinctrl_get_group_name,
++      .get_group_pins         = bcm63268_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm63268_pmx_ops = {
++      .get_functions_count    = bcm63268_pinctrl_get_func_count,
++      .get_function_name      = bcm63268_pinctrl_get_func_name,
++      .get_function_groups    = bcm63268_pinctrl_get_groups,
++      .set_mux                = bcm63268_pinctrl_set_mux,
++      .gpio_request_enable    = bcm63268_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm63268_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm63268_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *led, *mode, *ctrl, *basemode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
++      led = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(led))
++              return PTR_ERR(led);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
++      ctrl = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(ctrl))
++              return PTR_ERR(ctrl);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
++      basemode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->led = led;
++      pctl->mode = mode;
++      pctl->ctrl = ctrl;
++      pctl->basemode = basemode;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm63268_pctl_ops;
++      pctl->desc.pmxops = &bcm63268_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
++      pctl->desc.pins = bcm63268_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM63268_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm63268_pinctrl_match[] = {
++      { .compatible = "brcm,bcm63268-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm63268_pinctrl_driver = {
++      .probe = bcm63268_pinctrl_probe,
++      .driver = {
++              .name = "bcm63268-pinctrl",
++              .of_match_table = bcm63268_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
new file mode 100644 (file)
index 0000000..bbd3981
--- /dev/null
@@ -0,0 +1,134 @@
+From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 26 Nov 2017 12:07:31 +0100
+Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
+ controllers
+
+For dual role gpio and pincontrol controller, the device registration
+path is often:
+
+  pinctrl_register(...);
+  gpiochip_add_data(...);
+  gpiochip_add_pin_range(...);
+
+If the device tree node has any gpio-hogs, the code will try to apply them
+in the gpiochip_add_data step, but fail as they cannot be requested, as the
+ranges are missing. But we also cannot first add the pinranges, as the
+appropriate data structures are only initialized in gpiochip_add_data.
+
+To fix this, defer gpio-hogs to the time pin ranges get added instead of
+directly at chip request time, if the gpio-chip has a request method.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+
+ drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
+ drivers/gpio/gpiolib.c    |  5 +++--
+ drivers/gpio/gpiolib.h    |  8 ++++++++
+ 3 files changed, 26 insertions(+), 7 deletions(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -237,12 +237,15 @@ static struct gpio_desc *of_parse_own_gp
+ /**
+  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
+  * @chip:     gpio chip to act on
++ * @start:    first gpio to check
++ * @num:      number of gpios to check
+  *
+- * This is only used by of_gpiochip_add to request/set GPIO initial
+- * configuration.
++ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
++ * gpiochip_add_pin_range to request/set GPIO initial configuration.
+  * It returns error if it fails otherwise 0 on success.
+  */
+-static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
++int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
++                         unsigned int num)
+ {
+       struct gpio_desc *desc = NULL;
+       struct device_node *np;
+@@ -250,7 +253,7 @@ static int of_gpiochip_scan_gpios(struct
+       enum gpio_lookup_flags lflags;
+       enum gpiod_flags dflags;
+       unsigned int i;
+-      int ret;
++      int ret, hwgpio;
+       for_each_available_child_of_node(chip->of_node, np) {
+               if (!of_property_read_bool(np, "gpio-hog"))
+@@ -262,6 +265,10 @@ static int of_gpiochip_scan_gpios(struct
+                       if (IS_ERR(desc))
+                               break;
++                      hwgpio = gpio_chip_hwgpio(desc);
++                      if (hwgpio < start || hwgpio >= (start + num))
++                              continue;
++
+                       ret = gpiod_hog(desc, name, lflags, dflags);
+                       if (ret < 0) {
+                               of_node_put(np);
+@@ -499,12 +506,13 @@ int of_gpiochip_add(struct gpio_chip *ch
+       of_node_get(chip->of_node);
+-      status = of_gpiochip_scan_gpios(chip);
+-      if (status) {
+-              of_node_put(chip->of_node);
+-              gpiochip_remove_pin_ranges(chip);
++      if (!chip->request) {
++              status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
++              if (status) {
++                      of_node_put(chip->of_node);
++                      gpiochip_remove_pin_ranges(chip);
++              }
+       }
+-
+       return status;
+ }
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -1958,7 +1958,8 @@ int gpiochip_add_pingroup_range(struct g
+       list_add_tail(&pin_range->node, &gdev->pin_ranges);
+-      return 0;
++      return of_gpiochip_scan_gpios(chip, gpio_offset,
++                                    pin_range->range.npins);
+ }
+ EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
+@@ -2010,7 +2011,7 @@ int gpiochip_add_pin_range(struct gpio_c
+       list_add_tail(&pin_range->node, &gdev->pin_ranges);
+-      return 0;
++      return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
+ }
+ EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
+--- a/drivers/gpio/gpiolib.h
++++ b/drivers/gpio/gpiolib.h
+@@ -99,6 +99,8 @@ struct gpio_desc *of_get_named_gpiod_fla
+                  const char *list_name, int index, enum of_gpio_flags *flags);
+ int of_gpiochip_add(struct gpio_chip *gc);
+ void of_gpiochip_remove(struct gpio_chip *gc);
++int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
++                         unsigned int num);
+ #else
+ static inline struct gpio_desc *of_find_gpio(struct device *dev,
+                                            const char *con_id,
+@@ -114,6 +116,12 @@ static inline struct gpio_desc *of_get_n
+ }
+ static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
+ static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
++static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
++                                       unsigned int start,
++                                       unsigned int num)
++{
++      return 0;
++}
+ #endif /* CONFIG_OF_GPIO */
+ #ifdef CONFIG_ACPI
diff --git a/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
new file mode 100644 (file)
index 0000000..e7ebb0b
--- /dev/null
@@ -0,0 +1,66 @@
+From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 19 Jan 2014 12:18:03 +0100
+Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
+
+In the same way as the ohci platform driver allows limiting ports,
+enable the same for ehci. This prevents a mismatch in the available
+ports between ehci/ohci on USB 2.0 controllers.
+
+This is needed if the USB host controller always reports the maximum
+number of ports regardless of the number of available ports (because
+one might be set to be usb device).
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      | 4 ++++
+ drivers/usb/host/ehci-platform.c | 2 ++
+ drivers/usb/host/ehci.h          | 1 +
+ include/linux/usb/ehci_pdriver.h | 1 +
+ 4 files changed, 8 insertions(+)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -678,6 +678,10 @@ int ehci_setup(struct usb_hcd *hcd)
+       /* cache this readonly data; minimize chip reads */
+       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++      if (ehci->num_ports) {
++              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
++              ehci->hcs_params |= ehci->num_ports;
++      }
+       ehci->sbrn = HCD_USB2;
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -62,6 +62,9 @@ static int ehci_platform_reset(struct us
+       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
++      if (pdata->num_ports && pdata->num_ports <= 15)
++              ehci->num_ports = pdata->num_ports;
++
+       if (pdata->pre_setup) {
+               retval = pdata->pre_setup(hcd);
+               if (retval < 0)
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -216,6 +216,7 @@ struct ehci_hcd {                  /* one per controlle
+       u32                     command;
+       /* SILICON QUIRKS */
++      unsigned int            num_ports;
+       unsigned                no_selective_suspend:1;
+       unsigned                has_fsl_port_bug:1; /* FreeScale */
+       unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -42,6 +42,7 @@ struct usb_hcd;
+  */
+ struct usb_ehci_pdata {
+       int             caps_offset;
++      unsigned int    num_ports;
+       unsigned        has_tt:1;
+       unsigned        has_synopsys_hc_bug:1;
+       unsigned        big_endian_desc:1;
diff --git a/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
new file mode 100644 (file)
index 0000000..90b1640
--- /dev/null
@@ -0,0 +1,484 @@
+From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 03:54:05 +0100
+Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
+ own file
+
+Move device registration code into its own file to allow sharing it
+between board implementations.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Makefile         |   1 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
+ arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |   8 ++
+ 4 files changed, 223 insertions(+), 183 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.c
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.h
+
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1 +1,2 @@
++obj-y                                 += board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,33 +12,21 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+-#include <linux/platform_device.h>
+-#include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_nvram.h>
+-#include <bcm63xx_dev_pci.h>
+-#include <bcm63xx_dev_enet.h>
+-#include <bcm63xx_dev_flash.h>
+-#include <bcm63xx_dev_hsspi.h>
+-#include <bcm63xx_dev_pcmcia.h>
+-#include <bcm63xx_dev_spi.h>
+-#include <bcm63xx_dev_usb_ehci.h>
+-#include <bcm63xx_dev_usb_ohci.h>
+-#include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include "board_common.h"
++
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #define HCS_OFFSET_128K                       0x20000
+-static struct board_info board;
+-
+ /*
+  * known 3368 boards
+  */
+@@ -695,52 +683,6 @@ static const struct board_info __initcon
+ };
+ /*
+- * Register a sane SPROMv2 to make the on-board
+- * bcm4318 WLAN work
+- */
+-#ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
+-      .revision               = 0x02,
+-      .board_rev              = 0x17,
+-      .country_code           = 0x0,
+-      .ant_available_bg       = 0x3,
+-      .pa0b0                  = 0x15ae,
+-      .pa0b1                  = 0xfa85,
+-      .pa0b2                  = 0xfe8d,
+-      .pa1b0                  = 0xffff,
+-      .pa1b1                  = 0xffff,
+-      .pa1b2                  = 0xffff,
+-      .gpio0                  = 0xff,
+-      .gpio1                  = 0xff,
+-      .gpio2                  = 0xff,
+-      .gpio3                  = 0xff,
+-      .maxpwr_bg              = 0x004c,
+-      .itssi_bg               = 0x00,
+-      .boardflags_lo          = 0x2848,
+-      .boardflags_hi          = 0x0000,
+-};
+-
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+-{
+-      if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+-              return 0;
+-      } else {
+-              pr_err("unable to fill SPROM for given bustype\n");
+-              return -EINVAL;
+-      }
+-}
+-#endif
+-
+-/*
+- * return board name for /proc/cpuinfo
+- */
+-const char *board_get_name(void)
+-{
+-      return board.name;
+-}
+-
+-/*
+  * early init callback, read nvram data from flash and checksum it
+  */
+ void __init board_prom_init(void)
+@@ -785,137 +727,15 @@ void __init board_prom_init(void)
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+                       continue;
+               /* copy, board desc array is marked initdata */
+-              memcpy(&board, bcm963xx_boards[i], sizeof(board));
++              board_early_setup(bcm963xx_boards[i]);
+               break;
+       }
+-      /* bail out if board is not found, will complain later */
+-      if (!board.name[0]) {
++      /* warn if board is not found, will complain later */
++      if (i == ARRAY_SIZE(bcm963xx_boards)) {
+               char name[17];
+               memcpy(name, board_name, 16);
+               name[16] = 0;
+               pr_err("unknown bcm963xx board: %s\n", name);
+-              return;
+-      }
+-
+-      /* setup pin multiplexing depending on board enabled device,
+-       * this has to be done this early since PCI init is done
+-       * inside arch_initcall */
+-      val = 0;
+-
+-#ifdef CONFIG_PCI
+-      if (board.has_pci) {
+-              bcm63xx_pci_enabled = 1;
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G2_PCI;
+       }
+-#endif
+-
+-      if (board.has_pccard) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
+-      }
+-
+-      if (board.has_enet0 && !board.enet0.use_internal_phy) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G3_EXT_MII |
+-                              GPIO_MODE_6348_G0_EXT_MII;
+-      }
+-
+-      if (board.has_enet1 && !board.enet1.use_internal_phy) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G3_EXT_MII |
+-                              GPIO_MODE_6348_G0_EXT_MII;
+-      }
+-
+-      bcm_gpio_writel(val, GPIO_MODE_REG);
+-}
+-
+-/*
+- * second stage init callback, good time to panic if we couldn't
+- * identify on which board we're running since early printk is working
+- */
+-void __init board_setup(void)
+-{
+-      if (!board.name[0])
+-              panic("unable to detect bcm963xx board");
+-      pr_info("board name: %s\n", board.name);
+-
+-      /* make sure we're running on expected cpu */
+-      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+-              panic("unexpected CPU for bcm963xx board");
+-}
+-
+-static struct gpio_led_platform_data bcm63xx_led_data;
+-
+-static struct platform_device bcm63xx_gpio_leds = {
+-      .name                   = "leds-gpio",
+-      .id                     = 0,
+-      .dev.platform_data      = &bcm63xx_led_data,
+-};
+-
+-/*
+- * third stage init callback, register all board devices.
+- */
+-int __init board_register_devices(void)
+-{
+-      if (board.has_uart0)
+-              bcm63xx_uart_register(0);
+-
+-      if (board.has_uart1)
+-              bcm63xx_uart_register(1);
+-
+-      if (board.has_pccard)
+-              bcm63xx_pcmcia_register();
+-
+-      if (board.has_enet0 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
+-              bcm63xx_enet_register(0, &board.enet0);
+-
+-      if (board.has_enet1 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
+-              bcm63xx_enet_register(1, &board.enet1);
+-
+-      if (board.has_enetsw &&
+-          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+-              bcm63xx_enetsw_register(&board.enetsw);
+-
+-      if (board.has_usbd)
+-              bcm63xx_usbd_register(&board.usbd);
+-
+-      if (board.has_ehci0)
+-              bcm63xx_ehci_register();
+-
+-      if (board.has_ohci0)
+-              bcm63xx_ohci_register();
+-
+-      /* Generate MAC address for WLAN and register our SPROM,
+-       * do this after registering enet devices
+-       */
+-#ifdef CONFIG_SSB_PCIHOST
+-      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+-              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              if (ssb_arch_register_fallback_sprom(
+-                              &bcm63xx_get_fallback_sprom) < 0)
+-                      pr_err("failed to register fallback SPROM\n");
+-      }
+-#endif
+-
+-      bcm63xx_spi_register();
+-
+-      bcm63xx_hsspi_register();
+-
+-      bcm63xx_flash_register();
+-
+-      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+-      bcm63xx_led_data.leds = board.leds;
+-
+-      platform_device_register(&bcm63xx_gpio_leds);
+-
+-      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+-              gpio_request_one(board.ephy_reset_gpio,
+-                              board.ephy_reset_gpio_flags, "ephy-reset");
+-
+-      return 0;
+ }
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -0,0 +1,214 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/ssb/ssb.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_gpio.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_usbd.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "board: "
++
++static struct board_info board;
++
++/*
++ * Register a sane SPROMv2 to make the on-board
++ * bcm4318 WLAN work
++ */
++#ifdef CONFIG_SSB_PCIHOST
++static struct ssb_sprom bcm63xx_sprom = {
++      .revision               = 0x02,
++      .board_rev              = 0x17,
++      .country_code           = 0x0,
++      .ant_available_bg       = 0x3,
++      .pa0b0                  = 0x15ae,
++      .pa0b1                  = 0xfa85,
++      .pa0b2                  = 0xfe8d,
++      .pa1b0                  = 0xffff,
++      .pa1b1                  = 0xffff,
++      .pa1b2                  = 0xffff,
++      .gpio0                  = 0xff,
++      .gpio1                  = 0xff,
++      .gpio2                  = 0xff,
++      .gpio3                  = 0xff,
++      .maxpwr_bg              = 0x004c,
++      .itssi_bg               = 0x00,
++      .boardflags_lo          = 0x2848,
++      .boardflags_hi          = 0x0000,
++};
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->bustype == SSB_BUSTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++      return board.name;
++}
++
++/*
++ * setup board for device registration
++ */
++void __init board_early_setup(const struct board_info *target)
++{
++      u32 val;
++
++      memcpy(&board, target, sizeof(board));
++
++      /* setup pin multiplexing depending on board enabled device,
++       * this has to be done this early since PCI init is done
++       * inside arch_initcall */
++      val = 0;
++
++#ifdef CONFIG_PCI
++      if (board.has_pci) {
++              bcm63xx_pci_enabled = 1;
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G2_PCI;
++      }
++#endif
++
++      if (board.has_pccard) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
++      }
++
++      if (board.has_enet0 && !board.enet0.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      if (board.has_enet1 && !board.enet1.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++      if (!board.name[0])
++              panic("unable to detect bcm963xx board");
++      printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++      /* make sure we're running on expected cpu */
++      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++              panic("unexpected CPU for bcm963xx board");
++}
++
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++      .name                   = "leds-gpio",
++      .id                     = 0,
++      .dev.platform_data      = &bcm63xx_led_data,
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++      if (board.has_uart0)
++              bcm63xx_uart_register(0);
++
++      if (board.has_uart1)
++              bcm63xx_uart_register(1);
++
++      if (board.has_pccard)
++              bcm63xx_pcmcia_register();
++
++      if (board.has_enet0 &&
++          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++              bcm63xx_enet_register(0, &board.enet0);
++
++      if (board.has_enet1 &&
++          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++              bcm63xx_enet_register(1, &board.enet1);
++
++      if (board.has_enetsw &&
++          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++              bcm63xx_enetsw_register(&board.enetsw);
++
++      if (board.has_usbd)
++              bcm63xx_usbd_register(&board.usbd);
++
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
++      /* Generate MAC address for WLAN and register our SPROM,
++       * do this after registering enet devices
++       */
++#ifdef CONFIG_SSB_PCIHOST
++      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              if (ssb_arch_register_fallback_sprom(
++                              &bcm63xx_get_fallback_sprom) < 0)
++                      pr_err(PFX "failed to register fallback SPROM\n");
++      }
++#endif
++
++      bcm63xx_spi_register();
++
++      bcm63xx_hsspi_register();
++
++      bcm63xx_flash_register();
++
++      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
++      bcm63xx_led_data.leds = board.leds;
++
++      platform_device_register(&bcm63xx_gpio_leds);
++
++      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
++              gpio_request_one(board.ephy_reset_gpio,
++                              board.ephy_reset_gpio_flags, "ephy-reset");
++
++      return 0;
++}
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -0,0 +1,8 @@
++#ifndef __BOARD_COMMON_H
++#define __BOARD_COMMON_H
++
++#include <board_bcm963xx.h>
++
++void board_early_setup(const struct board_info *board);
++
++#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
new file mode 100644 (file)
index 0000000..7f9479b
--- /dev/null
@@ -0,0 +1,100 @@
+From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:08:06 +0100
+Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
+ setup
+
+Pass a mac address allocator to board setup code to allow board
+implementations to work with third party bootloaders not using nvram
+for configuration storage.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
+ arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
+ arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
+ 3 files changed, 14 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -727,7 +727,8 @@ void __init board_prom_init(void)
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+                       continue;
+               /* copy, board desc array is marked initdata */
+-              board_early_setup(bcm963xx_boards[i]);
++              board_early_setup(bcm963xx_boards[i],
++                                bcm63xx_nvram_get_mac_address);
+               break;
+       }
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -18,7 +18,6 @@
+ #include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+-#include <bcm63xx_nvram.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_dev_pci.h>
+ #include <bcm63xx_dev_enet.h>
+@@ -81,15 +80,20 @@ const char *board_get_name(void)
+       return board.name;
+ }
++static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
++
+ /*
+  * setup board for device registration
+  */
+-void __init board_early_setup(const struct board_info *target)
++void __init board_early_setup(const struct board_info *target,
++                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
+ {
+       u32 val;
+       memcpy(&board, target, sizeof(board));
++      board_get_mac_address = get_mac_address;
++
+       /* setup pin multiplexing depending on board enabled device,
+        * this has to be done this early since PCI init is done
+        * inside arch_initcall */
+@@ -162,15 +166,15 @@ int __init board_register_devices(void)
+               bcm63xx_pcmcia_register();
+       if (board.has_enet0 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++          !board_get_mac_address(board.enet0.mac_addr))
+               bcm63xx_enet_register(0, &board.enet0);
+       if (board.has_enet1 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++          !board_get_mac_address(board.enet1.mac_addr))
+               bcm63xx_enet_register(1, &board.enet1);
+       if (board.has_enetsw &&
+-          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++          !board_get_mac_address(board.enetsw.mac_addr))
+               bcm63xx_enetsw_register(&board.enetsw);
+       if (board.has_usbd)
+@@ -186,7 +190,7 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+ #ifdef CONFIG_SSB_PCIHOST
+-      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               if (ssb_arch_register_fallback_sprom(
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -3,6 +3,7 @@
+ #include <board_bcm963xx.h>
+-void board_early_setup(const struct board_info *board);
++void board_early_setup(const struct board_info *board,
++                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch b/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch
new file mode 100644 (file)
index 0000000..fe6c6d2
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -707,10 +707,20 @@ void __init board_prom_init(void)
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+-      if (!memcmp(cfe, "cfe-v", 5))
+-              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+-                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+-      else
++      if (strstarts(cfe, "cfe-")) {
++              if(cfe[4] == 'v') {
++                      if(cfe[5] == 'd')
++                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
++                      else if (cfe[10] > 0)
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
++                      else
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++              } else {
++                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
++              }
++      } else
+               strcpy(cfe_version, "unknown");
+       pr_info("CFE version: %s\n", cfe_version);
diff --git a/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch b/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch
new file mode 100644 (file)
index 0000000..0e4e759
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
+@@ -2,6 +2,8 @@
+ #ifndef BCM63XX_BOARD_H_
+ #define BCM63XX_BOARD_H_
++#include <asm/bootinfo.h>
++
+ const char *board_get_name(void);
+ void board_prom_init(void);
+@@ -10,4 +12,8 @@ void board_setup(void);
+ int board_register_devices(void);
++static inline bool bcm63xx_is_cfe_present(void) {
++      return fw_arg3 == 0x43464531;
++}
++
+ #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch b/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch
new file mode 100644 (file)
index 0000000..bca6adb
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -35,6 +35,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/of.h>
++ 
++#include <asm/mach-bcm63xx/bcm63xx_board.h>
+ #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
+@@ -46,30 +48,6 @@
+ #define STR_NULL_TERMINATE(x) \
+       do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
+-static int bcm63xx_detect_cfe(struct mtd_info *master)
+-{
+-      char buf[9];
+-      int ret;
+-      size_t retlen;
+-
+-      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      if (ret)
+-              return ret;
+-
+-      if (strncmp("cfe-v", buf, 5) == 0)
+-              return 0;
+-
+-      /* very old CFE's do not have the cfe-v string, so check for magic */
+-      ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      return strncmp("CFE1CFE1", buf, 8);
+-}
+-
+ static int bcm63xx_read_nvram(struct mtd_info *master,
+       struct bcm963xx_nvram *nvram)
+ {
+@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
+       struct bcm963xx_nvram *nvram = NULL;
+       int ret;
+-      if (bcm63xx_detect_cfe(master))
++      if (!bcm63xx_is_cfe_present())
+               return -EINVAL;
+       nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
new file mode 100644 (file)
index 0000000..7235d1f
--- /dev/null
@@ -0,0 +1,455 @@
+From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:53:12 +0100
+Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
+ controller
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ .../brcm,bcm6345-periph-intc.txt                   |   50 +++
+ drivers/irqchip/Kconfig                            |    4 +
+ drivers/irqchip/Makefile                           |    1 +
+ drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
+ include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
+ 5 files changed, 410 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
+ create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
+ create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
+@@ -0,0 +1,50 @@
++Broadcom BCM6345 Level 1 periphery interrupt controller
++
++This block is a  interrupt controller that is typically connected directly
++to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
++BCM6345 has contained this hardware.
++
++Key elements of the hardware design include:
++
++- 32, 64, or 128 incoming level IRQ lines
++
++- All onchip peripherals are wired directly to an L2 input
++
++- A separate instance of the register set for each CPU, allowing individual
++  peripheral IRQs to be routed to any CPU
++
++- No atomic mask/unmask operations
++
++- No polarity/level/edge settings
++
++- No FIFO or priority encoder logic; software is expected to read all
++  1-4 status words to determine which IRQs are pending
++
++Required properties:
++
++- compatible: Should be "brcm,bcm6345-periph-intc".
++- reg: Specifies the base physical address and size of the registers.
++  Multiple register addresses may be specified, and must match the amount of
++  parent interrupts.
++- interrupt-controller: Identifies the node as an interrupt controller.
++- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
++  source, should be 1.
++- interrupt-parent: Specifies the phandle to the parent interrupt controller
++  this one is cascaded from.
++- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
++  node, valid values depend on the type of parent interrupt controller.
++  Multiple lines are used to route interrupts to different cpus, with the first
++  assumed to be for the boot CPU.
++
++Example:
++
++periph_intc: interrupt-controller@f0406800 {
++      compatible = "brcm,bcm6345-periph-intc";
++      reg = <0x10000020 0x10>, <0x10000030 0x10>;
++
++      interrupt-controller;
++      #interrupt-cells = <1>;
++
++      interrupt-parent = <&cpu_intc>;
++      interrupts = <2>, <3>;
++};
+--- a/drivers/irqchip/Kconfig
++++ b/drivers/irqchip/Kconfig
+@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
+       select GENERIC_IRQ_CHIP
+       select IRQ_DOMAIN
++config BCM6345_PERIPH_IRQ
++      bool
++      select IRQ_DOMAIN
++
+ config DW_APB_ICTL
+       bool
+       select GENERIC_IRQ_CHIP
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
+ obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
+ obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
+ obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
++obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
+ obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
+ obj-$(CONFIG_METAG)                   += irq-metag-ext.o
+ obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)  += irq-metag.o
+--- /dev/null
++++ b/drivers/irqchip/irq-bcm6345-periph.c
+@@ -0,0 +1,339 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/chained_irq.h>
++#include <linux/irqchip/irq-bcm6345-periph.h>
++#include <linux/kernel.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#ifdef CONFIG_BCM63XX
++#include <asm/mach-bcm63xx/bcm63xx_irq.h>
++
++#define VIRQ_BASE     IRQ_INTERNAL_BASE
++#else
++#define VIRQ_BASE     0
++#endif
++
++#define MAX_WORDS     4
++#define MAX_PARENT_IRQS       2
++#define IRQS_PER_WORD 32
++
++struct intc_block {
++      int parent_irq;
++      void __iomem *base;
++      void __iomem *en_reg[MAX_WORDS];
++      void __iomem *status_reg[MAX_WORDS];
++      u32 mask_cache[MAX_WORDS];
++};
++
++struct intc_data {
++      struct irq_chip chip;
++      struct intc_block block[MAX_PARENT_IRQS];
++
++      int num_words;
++
++      struct irq_domain *domain;
++      raw_spinlock_t lock;
++};
++
++static void bcm6345_periph_irq_handle(struct irq_desc *desc)
++{
++      struct intc_data *data = irq_desc_get_handler_data(desc);
++      struct irq_chip *chip = irq_desc_get_chip(desc);
++      struct intc_block *block;
++      unsigned int irq = irq_desc_get_irq(desc);
++      unsigned int idx;
++
++      chained_irq_enter(chip, desc);
++
++      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
++              if (irq == data->block[idx].parent_irq)
++                      block = &data->block[idx];
++
++      for (idx = 0; idx < data->num_words; idx++) {
++              int base = idx * IRQS_PER_WORD;
++              unsigned long pending;
++              int hw_irq;
++
++              raw_spin_lock(&data->lock);
++              pending = __raw_readl(block->en_reg[idx]) &
++                        __raw_readl(block->status_reg[idx]);
++              raw_spin_unlock(&data->lock);
++
++              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
++                      int virq;
++
++                      virq  = irq_find_mapping(data->domain, base + hw_irq);
++                      generic_handle_irq(virq);
++              }
++      }
++
++      chained_irq_exit(chip, desc);
++}
++
++static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
++                                  bool enable)
++{
++      u32 val;
++
++      val = __raw_readl(block->en_reg[reg]);
++      if (enable)
++              val |= BIT(bit);
++      else
++              val &= ~BIT(bit);
++      __raw_writel(val, block->en_reg[reg]);
++}
++
++static void bcm6345_periph_irq_mask(struct irq_data *data)
++{
++      unsigned int i, reg, bit;
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      raw_spin_lock(&priv->lock);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              __bcm6345_periph_enable(block, reg, bit, false);
++      }
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_periph_irq_unmask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      unsigned int i, reg, bit;
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      raw_spin_lock(&priv->lock);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              if (block->mask_cache[reg] & BIT(bit))
++                      __bcm6345_periph_enable(block, reg, bit, true);
++              else
++                      __bcm6345_periph_enable(block, reg, bit, false);
++      }
++      raw_spin_unlock(&priv->lock);
++}
++
++#ifdef CONFIG_SMP
++static int bcm6345_periph_set_affinity(struct irq_data *data,
++                                     const struct cpumask *mask, bool force)
++{
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      struct intc_data *priv = data->domain->host_data;
++      unsigned int i, reg, bit;
++      unsigned long flags;
++      bool enabled;
++      int cpu;
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      /* we could route to more than one cpu, but performance
++         suffers, so fix it to one.
++       */
++      cpu = cpumask_any_and(mask, cpu_online_mask);
++      if (cpu >= nr_cpu_ids)
++              return -EINVAL;
++
++      if (cpu >= MAX_PARENT_IRQS)
++              return -EINVAL;
++
++      if (!priv->block[cpu].parent_irq)
++              return -EINVAL;
++
++      raw_spin_lock_irqsave(&priv->lock, flags);
++      enabled = !irqd_irq_masked(data);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              if (i == cpu) {
++                      block->mask_cache[reg] |= BIT(bit);
++                      __bcm6345_periph_enable(block, reg, bit, enabled);
++              } else {
++                      block->mask_cache[reg] &= ~BIT(bit);
++                      __bcm6345_periph_enable(block, reg, bit, false);
++              }
++      }
++      raw_spin_unlock_irqrestore(&priv->lock, flags);
++
++      return 0;
++}
++#endif
++
++static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
++                            irq_hw_number_t hw)
++{
++      struct intc_data *priv = d->host_data;
++
++      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
++
++      return 0;
++}
++
++static const struct irq_domain_ops bcm6345_periph_domain_ops = {
++      .xlate = irq_domain_xlate_onecell,
++      .map = bcm6345_periph_map,
++};
++
++static int __init __bcm6345_periph_intc_init(struct device_node *node,
++                                           int num_blocks, int *irq,
++                                           void __iomem **base, int num_words)
++{
++      struct intc_data *data;
++      unsigned int i, w, status_offset;
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (!data)
++              return -ENOMEM;
++
++      raw_spin_lock_init(&data->lock);
++
++      status_offset = num_words * sizeof(u32);
++
++      for (i = 0; i < num_blocks; i++) {
++              struct intc_block *block = &data->block[i];
++
++              block->parent_irq = irq[i];
++              block->base = base[i];
++
++              for (w = 0; w < num_words; w++) {
++                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
++
++                      block->en_reg[w] = base[i] + word_offset;
++                      block->status_reg[w] = base[i] + status_offset;
++                      block->status_reg[w] += word_offset;
++
++                      /* route all interrupts to line 0 by default */
++                      if (i == 0)
++                              block->mask_cache[w] = 0xffffffff;
++              }
++
++              irq_set_handler_data(block->parent_irq, data);
++              irq_set_chained_handler(block->parent_irq,
++                                      bcm6345_periph_irq_handle);
++      }
++
++      data->num_words = num_words;
++
++      data->chip.name = "bcm6345-periph-intc";
++      data->chip.irq_mask = bcm6345_periph_irq_mask;
++      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
++
++#ifdef CONFIG_SMP
++      if (num_blocks > 1)
++              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
++#endif
++
++      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
++                                           VIRQ_BASE,
++                                           &bcm6345_periph_domain_ops, data);
++      if (!data->domain) {
++              kfree(data);
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
++                                   void __iomem **base, int num_words)
++{
++      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
++}
++
++#ifdef CONFIG_OF
++static int __init bcm6345_periph_of_init(struct device_node *node,
++                                       struct device_node *parent)
++{
++      struct resource res;
++      int num_irqs, ret = -EINVAL;
++      int irqs[MAX_PARENT_IRQS] = { 0 };
++      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
++      int words = 0;
++      int i;
++
++      num_irqs = of_irq_count(node);
++
++      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
++              return -EINVAL;
++
++      for (i = 0; i < num_irqs; i++) {
++              resource_size_t size;
++
++              irqs[i] = irq_of_parse_and_map(node, i);
++              if (!irqs[i])
++                      goto out_unmap;
++
++              if (of_address_to_resource(node, i, &res))
++                      goto out_unmap;
++
++              size = resource_size(&res);
++              switch (size) {
++              case 8:
++              case 16:
++              case 32:
++                      size = size / 8;
++                      break;
++              default:
++                      goto out_unmap;
++              }
++
++              if (words && words != size) {
++                      ret = -EINVAL;
++                      goto out_unmap;
++              }
++              words = size;
++
++              bases[i] = of_iomap(node, i);
++              if (!bases[i]) {
++                      ret = -ENOMEM;
++                      goto out_unmap;
++              }
++      }
++
++      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
++      if (!ret)
++              return 0;
++
++out_unmap:
++      for (i = 0; i < num_irqs; i++) {
++              iounmap(bases[i]);
++              irq_dispose_mapping(irqs[i]);
++      }
++
++      return ret;
++}
++
++IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
++              bcm6345_periph_of_init);
++#endif
+--- /dev/null
++++ b/include/linux/irqchip/irq-bcm6345-periph.h
+@@ -0,0 +1,16 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
++ */
++
++#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
++#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
++
++void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
++                            int num_words);
++
++#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
new file mode 100644 (file)
index 0000000..b5df035
--- /dev/null
@@ -0,0 +1,394 @@
+From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:54:27 +0100
+Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
+ interrupt controller
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
+ drivers/irqchip/Kconfig                            |    4 +
+ drivers/irqchip/Makefile                           |    1 +
+ drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
+ include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
+ 5 files changed, 335 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
+ create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
+ create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
+@@ -0,0 +1,29 @@
++Broadcom BCM6345-style external interrupt controller
++
++Required properties:
++
++- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
++- reg: Specifies the base physical addresses and size of the registers.
++- interrupt-controller: identifies the node as an interrupt controller.
++- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
++  source, Should be 2.
++- interrupt-parent: Specifies the phandle to the parent interrupt controller
++  this one is cascaded from.
++- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
++  node, valid values depend on the type of parent interrupt controller.
++
++Optional properties:
++
++- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
++  register. Defaults to 4.
++
++Example:
++
++ext_intc: interrupt-controller@10000018 {
++      compatible = "brcm,bcm6345-ext-intc";
++      interrupt-parent = <&periph_intc>;
++      #interrupt-cells = <2>;
++      reg = <0x10000018 0x4>;
++      interrupt-controller;
++      interrupts = <24>, <25>, <26>, <27>;
++};
+--- a/drivers/irqchip/Kconfig
++++ b/drivers/irqchip/Kconfig
+@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
+       select GENERIC_IRQ_CHIP
+       select IRQ_DOMAIN
++config BCM6345_EXT_IRQ
++      bool
++      select IRQ_DOMAIN
++
+ config BCM6345_PERIPH_IRQ
+       bool
+       select IRQ_DOMAIN
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
+ obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
+ obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
+ obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
++obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
+ obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
+ obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
+ obj-$(CONFIG_METAG)                   += irq-metag-ext.o
+--- /dev/null
++++ b/drivers/irqchip/irq-bcm6345-ext.c
+@@ -0,0 +1,301 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/chained_irq.h>
++#include <linux/irqchip/irq-bcm6345-ext.h>
++#include <linux/kernel.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#ifdef CONFIG_BCM63XX
++#include <asm/mach-bcm63xx/bcm63xx_irq.h>
++
++#define VIRQ_BASE             IRQ_EXTERNAL_BASE
++#else
++#define VIRQ_BASE             0
++#endif
++
++#define MAX_IRQS              4
++
++#define EXTIRQ_CFG_SENSE      0
++#define EXTIRQ_CFG_STAT               1
++#define EXTIRQ_CFG_CLEAR      2
++#define EXTIRQ_CFG_MASK               3
++#define EXTIRQ_CFG_BOTHEDGE   4
++#define EXTIRQ_CFG_LEVELSENSE 5
++
++struct intc_data {
++      struct irq_chip chip;
++      struct irq_domain *domain;
++      raw_spinlock_t lock;
++
++      int parent_irq[MAX_IRQS];
++      void __iomem *reg;
++      int shift;
++      unsigned int toggle_clear_on_ack:1;
++};
++
++static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
++{
++      struct intc_data *data = irq_desc_get_handler_data(desc);
++      struct irq_chip *chip = irq_desc_get_chip(desc);
++      unsigned int irq = irq_desc_get_irq(desc);
++      unsigned int idx;
++
++      chained_irq_enter(chip, desc);
++
++      for (idx = 0; idx < MAX_IRQS; idx++) {
++              if (data->parent_irq[idx] != irq)
++                      continue;
++
++              generic_handle_irq(irq_find_mapping(data->domain, idx));
++      }
++
++      chained_irq_exit(chip, desc);
++}
++
++static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
++                   priv->reg);
++      if (priv->toggle_clear_on_ack)
++              __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static int bcm6345_ext_intc_set_type(struct irq_data *data,
++                                   unsigned int flow_type)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      bool levelsense = 0, sense = 0, bothedge = 0;
++      u32 reg;
++
++      flow_type &= IRQ_TYPE_SENSE_MASK;
++
++      if (flow_type == IRQ_TYPE_NONE)
++              flow_type = IRQ_TYPE_LEVEL_LOW;
++
++      switch (flow_type) {
++      case IRQ_TYPE_EDGE_BOTH:
++              bothedge = 1;
++              break;
++
++      case IRQ_TYPE_EDGE_RISING:
++              sense = 1;
++              break;
++
++      case IRQ_TYPE_EDGE_FALLING:
++              break;
++
++      case IRQ_TYPE_LEVEL_HIGH:
++              levelsense = 1;
++              sense = 1;
++              break;
++
++      case IRQ_TYPE_LEVEL_LOW:
++              levelsense = 1;
++              break;
++
++      default:
++              pr_err("bogus flow type combination given!\n");
++              return -EINVAL;
++      }
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++
++      if (levelsense)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
++      if (sense)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
++      if (bothedge)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
++
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++
++      irqd_set_trigger_type(data, flow_type);
++      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++              irq_set_handler_locked(data, handle_level_irq);
++      else
++              irq_set_handler_locked(data, handle_edge_irq);
++
++      return 0;
++}
++
++static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
++                              irq_hw_number_t hw)
++{
++      struct intc_data *priv = d->host_data;
++
++      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
++
++      return 0;
++}
++
++static const struct irq_domain_ops bcm6345_ext_domain_ops = {
++      .xlate = irq_domain_xlate_twocell,
++      .map = bcm6345_ext_intc_map,
++};
++
++static int __init __bcm6345_ext_intc_init(struct device_node *node,
++                                        int num_irqs, int *irqs,
++                                        void __iomem *reg, int shift,
++                                        bool toggle_clear_on_ack)
++{
++      struct intc_data *data;
++      unsigned int i;
++      int start = VIRQ_BASE;
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (!data)
++              return -ENOMEM;
++
++      raw_spin_lock_init(&data->lock);
++
++      for (i = 0; i < num_irqs; i++) {
++              data->parent_irq[i] = irqs[i];
++
++              irq_set_handler_data(irqs[i], data);
++              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
++      }
++
++      data->reg = reg;
++      data->shift = shift;
++      data->toggle_clear_on_ack = toggle_clear_on_ack;
++
++      data->chip.name = "bcm6345-ext-intc";
++      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
++      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
++      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
++      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
++
++      /*
++       * If we have less than 4 irqs, this is the second controller on
++       * bcm63xx. So increase the VIRQ start to not overlap with the first
++       * one, but only do so if we actually use a non-zero start.
++       *
++       * This can be removed when bcm63xx has no legacy users anymore.
++       */
++      if (start && num_irqs < 4)
++              start += 4;
++
++      data->domain = irq_domain_add_simple(node, num_irqs, start,
++                                           &bcm6345_ext_domain_ops, data);
++      if (!data->domain) {
++              kfree(data);
++              return -ENOMEM;
++      }
++
++      return 0;
++}
++
++void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
++                                int shift)
++{
++      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
++}
++
++#ifdef CONFIG_OF
++static int __init bcm6345_ext_intc_of_init(struct device_node *node,
++                                         struct device_node *parent)
++{
++      int num_irqs, ret = -EINVAL;
++      unsigned i;
++      void __iomem *base;
++      int irqs[MAX_IRQS] = { 0 };
++      u32 shift;
++      bool toggle_clear_on_ack = false;
++
++      num_irqs = of_irq_count(node);
++
++      if (!num_irqs || num_irqs > MAX_IRQS)
++              return -EINVAL;
++
++      if (of_property_read_u32(node, "brcm,field-width", &shift))
++              shift = 4;
++
++      /* on BCM6318 setting CLEAR seems to continuously mask interrupts */
++      if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
++              toggle_clear_on_ack = true;
++
++      for (i = 0; i < num_irqs; i++) {
++              irqs[i] = irq_of_parse_and_map(node, i);
++              if (!irqs[i]) {
++                      ret = -ENOMEM;
++                      goto out_unmap;
++              }
++      }
++
++      base = of_iomap(node, 0);
++      if (!base)
++              goto out_unmap;
++
++      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
++                                    toggle_clear_on_ack);
++      if (!ret)
++              return 0;
++out_unmap:
++      iounmap(base);
++
++      for (i = 0; i < num_irqs; i++)
++              irq_dispose_mapping(irqs[i]);
++
++      return ret;
++}
++
++IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
++              bcm6345_ext_intc_of_init);
++IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
++              bcm6345_ext_intc_of_init);
++#endif
+--- /dev/null
++++ b/include/linux/irqchip/irq-bcm6345-ext.h
+@@ -0,0 +1,14 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
++#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
++
++void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
++
++#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
new file mode 100644 (file)
index 0000000..d04d89c
--- /dev/null
@@ -0,0 +1,695 @@
+From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:55:02 +0100
+Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
+
+Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
+switch to using them.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/Kconfig       |   3 +
+ arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
+ 2 files changed, 108 insertions(+), 507 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -272,6 +272,9 @@ config BCM63XX
+       select SYNC_R4K
+       select DMA_NONCOHERENT
+       select IRQ_MIPS_CPU
++      select BCM6345_EXT_IRQ
++      select BCM6345_PERIPH_IRQ
++      select IRQ_DOMAIN
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_HAS_EARLY_PRINTK
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -11,7 +11,9 @@
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+-#include <linux/spinlock.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/irq-bcm6345-ext.h>
++#include <linux/irqchip/irq-bcm6345-periph.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -19,544 +21,140 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+-
+-static DEFINE_SPINLOCK(ipic_lock);
+-static DEFINE_SPINLOCK(epic_lock);
+-
+-static u32 irq_stat_addr[2];
+-static u32 irq_mask_addr[2];
+-static void (*dispatch_internal)(int cpu);
+-static int is_ext_irq_cascaded;
+-static unsigned int ext_irq_count;
+-static unsigned int ext_irq_start, ext_irq_end;
+-static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+-static void (*internal_irq_mask)(struct irq_data *d);
+-static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
+-
+-
+-static inline u32 get_ext_irq_perf_reg(int irq)
+-{
+-      if (irq < 4)
+-              return ext_irq_cfg_reg1;
+-      return ext_irq_cfg_reg2;
+-}
+-
+-static inline void handle_internal(int intbit)
+-{
+-      if (is_ext_irq_cascaded &&
+-          intbit >= ext_irq_start && intbit <= ext_irq_end)
+-              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
+-      else
+-              do_IRQ(intbit + IRQ_INTERNAL_BASE);
+-}
+-
+-static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
+-                                   const struct cpumask *m)
+-{
+-      bool enable = cpu_online(cpu);
+-
+-#ifdef CONFIG_SMP
+-      if (m)
+-              enable &= cpumask_test_cpu(cpu, m);
+-      else if (irqd_affinity_was_set(d))
+-              enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
+-#endif
+-      return enable;
+-}
+-
+-/*
+- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+- * prioritize any interrupt relatively to another. the static counter
+- * will resume the loop where it ended the last time we left this
+- * function.
+- */
+-
+-#define BUILD_IPIC_INTERNAL(width)                                    \
+-void __dispatch_internal_##width(int cpu)                             \
+-{                                                                     \
+-      u32 pending[width / 32];                                        \
+-      unsigned int src, tgt;                                          \
+-      bool irqs_pending = false;                                      \
+-      static unsigned int i[2];                                       \
+-      unsigned int *next = &i[cpu];                                   \
+-      unsigned long flags;                                            \
+-                                                                      \
+-      /* read registers in reverse order */                           \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
+-              u32 val;                                                \
+-                                                                      \
+-              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
+-              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
+-              pending[--tgt] = val;                                   \
+-                                                                      \
+-              if (val)                                                \
+-                      irqs_pending = true;                            \
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-                                                                      \
+-      if (!irqs_pending)                                              \
+-              return;                                                 \
+-                                                                      \
+-      while (1) {                                                     \
+-              unsigned int to_call = *next;                           \
+-                                                                      \
+-              *next = (*next + 1) & (width - 1);                      \
+-              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
+-                      handle_internal(to_call);                       \
+-                      break;                                          \
+-              }                                                       \
+-      }                                                               \
+-}                                                                     \
+-                                                                      \
+-static void __internal_irq_mask_##width(struct irq_data *d)           \
+-{                                                                     \
+-      u32 val;                                                        \
+-      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+-      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+-      unsigned bit = irq & 0x1f;                                      \
+-      unsigned long flags;                                            \
+-      int cpu;                                                        \
+-                                                                      \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for_each_present_cpu(cpu) {                                     \
+-              if (!irq_mask_addr[cpu])                                \
+-                      break;                                          \
+-                                                                      \
+-              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-              val &= ~(1 << bit);                                     \
+-              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-}                                                                     \
+-                                                                      \
+-static void __internal_irq_unmask_##width(struct irq_data *d,         \
+-                                        const struct cpumask *m)      \
+-{                                                                     \
+-      u32 val;                                                        \
+-      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+-      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+-      unsigned bit = irq & 0x1f;                                      \
+-      unsigned long flags;                                            \
+-      int cpu;                                                        \
+-                                                                      \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for_each_present_cpu(cpu) {                                     \
+-              if (!irq_mask_addr[cpu])                                \
+-                      break;                                          \
+-                                                                      \
+-              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-              if (enable_irq_for_cpu(cpu, d, m))                      \
+-                      val |= (1 << bit);                              \
+-              else                                                    \
+-                      val &= ~(1 << bit);                             \
+-              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-}
+-
+-BUILD_IPIC_INTERNAL(32);
+-BUILD_IPIC_INTERNAL(64);
+-
+-asmlinkage void plat_irq_dispatch(void)
+-{
+-      u32 cause;
+-
+-      do {
+-              cause = read_c0_cause() & read_c0_status() & ST0_IM;
+-
+-              if (!cause)
+-                      break;
+-
+-              if (cause & CAUSEF_IP7)
+-                      do_IRQ(7);
+-              if (cause & CAUSEF_IP0)
+-                      do_IRQ(0);
+-              if (cause & CAUSEF_IP1)
+-                      do_IRQ(1);
+-              if (cause & CAUSEF_IP2)
+-                      dispatch_internal(0);
+-              if (is_ext_irq_cascaded) {
+-                      if (cause & CAUSEF_IP3)
+-                              dispatch_internal(1);
+-              } else {
+-                      if (cause & CAUSEF_IP3)
+-                              do_IRQ(IRQ_EXT_0);
+-                      if (cause & CAUSEF_IP4)
+-                              do_IRQ(IRQ_EXT_1);
+-                      if (cause & CAUSEF_IP5)
+-                              do_IRQ(IRQ_EXT_2);
+-                      if (cause & CAUSEF_IP6)
+-                              do_IRQ(IRQ_EXT_3);
+-              }
+-      } while (1);
+-}
+-
+-/*
+- * internal IRQs operations: only mask/unmask on PERF irq mask
+- * register.
+- */
+-static void bcm63xx_internal_irq_mask(struct irq_data *d)
+-{
+-      internal_irq_mask(d);
+-}
+-
+-static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+-{
+-      internal_irq_unmask(d, NULL);
+-}
+-
+-/*
+- * external IRQs operations: mask/unmask and clear on PERF external
+- * irq control register.
+- */
+-static void bcm63xx_external_irq_mask(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
+-      else
+-              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      if (is_ext_irq_cascaded)
+-              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
+-}
+-
+-static void bcm63xx_external_irq_unmask(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
+-      else
+-              reg |= EXTIRQ_CFG_MASK(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      if (is_ext_irq_cascaded)
+-              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
+-                                  NULL);
+-}
+-
+-static void bcm63xx_external_irq_clear(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
+-      else
+-              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-}
+-
+-static int bcm63xx_external_irq_set_type(struct irq_data *d,
+-                                       unsigned int flow_type)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      int levelsense, sense, bothedge;
+-      unsigned long flags;
+-
+-      flow_type &= IRQ_TYPE_SENSE_MASK;
+-
+-      if (flow_type == IRQ_TYPE_NONE)
+-              flow_type = IRQ_TYPE_LEVEL_LOW;
+-
+-      levelsense = sense = bothedge = 0;
+-      switch (flow_type) {
+-      case IRQ_TYPE_EDGE_BOTH:
+-              bothedge = 1;
+-              break;
+-
+-      case IRQ_TYPE_EDGE_RISING:
+-              sense = 1;
+-              break;
+-
+-      case IRQ_TYPE_EDGE_FALLING:
+-              break;
+-
+-      case IRQ_TYPE_LEVEL_HIGH:
+-              levelsense = 1;
+-              sense = 1;
+-              break;
+-
+-      case IRQ_TYPE_LEVEL_LOW:
+-              levelsense = 1;
+-              break;
+-
+-      default:
+-              pr_err("bogus flow type combination given !\n");
+-              return -EINVAL;
+-      }
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-      irq %= 4;
+-
+-      switch (bcm63xx_get_cpu_id()) {
+-      case BCM6348_CPU_ID:
+-              if (levelsense)
+-                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
+-              if (sense)
+-                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
+-              if (bothedge)
+-                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
+-              break;
+-
+-      case BCM3368_CPU_ID:
+-      case BCM6328_CPU_ID:
+-      case BCM6338_CPU_ID:
+-      case BCM6345_CPU_ID:
+-      case BCM6358_CPU_ID:
+-      case BCM6362_CPU_ID:
+-      case BCM6368_CPU_ID:
+-              if (levelsense)
+-                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+-              if (sense)
+-                      reg |= EXTIRQ_CFG_SENSE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_SENSE(irq);
+-              if (bothedge)
+-                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+-              break;
+-      default:
+-              BUG();
+-      }
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      irqd_set_trigger_type(d, flow_type);
+-      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+-              irq_set_handler_locked(d, handle_level_irq);
+-      else
+-              irq_set_handler_locked(d, handle_edge_irq);
+-
+-      return IRQ_SET_MASK_OK_NOCOPY;
+-}
+-
+-#ifdef CONFIG_SMP
+-static int bcm63xx_internal_set_affinity(struct irq_data *data,
+-                                       const struct cpumask *dest,
+-                                       bool force)
+-{
+-      if (!irqd_irq_disabled(data))
+-              internal_irq_unmask(data, dest);
+-
+-      return 0;
+-}
+-#endif
+-
+-static struct irq_chip bcm63xx_internal_irq_chip = {
+-      .name           = "bcm63xx_ipic",
+-      .irq_mask       = bcm63xx_internal_irq_mask,
+-      .irq_unmask     = bcm63xx_internal_irq_unmask,
+-};
+-
+-static struct irq_chip bcm63xx_external_irq_chip = {
+-      .name           = "bcm63xx_epic",
+-      .irq_ack        = bcm63xx_external_irq_clear,
+-
+-      .irq_mask       = bcm63xx_external_irq_mask,
+-      .irq_unmask     = bcm63xx_external_irq_unmask,
+-
+-      .irq_set_type   = bcm63xx_external_irq_set_type,
+-};
+-
+-static struct irqaction cpu_ip2_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_ip2",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-
+-#ifdef CONFIG_SMP
+-static struct irqaction cpu_ip3_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_ip3",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-#endif
+-
+-static struct irqaction cpu_ext_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_extirq",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-
+-static void bcm63xx_init_irq(void)
++void __init arch_init_irq(void)
+ {
+-      int irq_bits;
+-
+-      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
+-      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
++      void __iomem *periph_bases[2];
++      void __iomem *ext_intc_bases[2];
++      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
++      int periph_irqs[2] = { 2, 3 };
++      int ext_irqs[6];
++
++      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM3368_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
++              periph_bases[0] += PERF_IRQMASK_3368_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_3368_EXT_IRQ0;
++              ext_irqs[1] = BCM_3368_EXT_IRQ1;
++              ext_irqs[2] = BCM_3368_EXT_IRQ2;
++              ext_irqs[3] = BCM_3368_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6328_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
++              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6328_EXT_IRQ0;
++              ext_irqs[1] = BCM_6328_EXT_IRQ1;
++              ext_irqs[2] = BCM_6328_EXT_IRQ2;
++              ext_irqs[3] = BCM_6328_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6338_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
++              periph_bases[0] += PERF_IRQMASK_6338_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 4;
+               break;
+       case BCM6345_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
++              periph_bases[0] += PERF_IRQMASK_6345_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 4;
+               break;
+       case BCM6348_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
++              periph_bases[0] += PERF_IRQMASK_6348_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 5;
+               break;
+       case BCM6358_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
++              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
++              periph_irq_count = 2;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6358_EXT_IRQ0;
++              ext_irqs[1] = BCM_6358_EXT_IRQ1;
++              ext_irqs[2] = BCM_6358_EXT_IRQ2;
++              ext_irqs[3] = BCM_6358_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6362_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
++              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6362_EXT_IRQ0;
++              ext_irqs[1] = BCM_6362_EXT_IRQ1;
++              ext_irqs[2] = BCM_6362_EXT_IRQ2;
++              ext_irqs[3] = BCM_6362_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6368_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
+-              irq_bits = 64;
++              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
++              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
+               ext_irq_count = 6;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+-              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
++              ext_irqs[0] = BCM_6368_EXT_IRQ0;
++              ext_irqs[1] = BCM_6368_EXT_IRQ1;
++              ext_irqs[2] = BCM_6368_EXT_IRQ2;
++              ext_irqs[3] = BCM_6368_EXT_IRQ3;
++              ext_irqs[4] = BCM_6368_EXT_IRQ4;
++              ext_irqs[5] = BCM_6368_EXT_IRQ5;
++              ext_shift = 4;
+               break;
+       default:
+               BUG();
+       }
+-      if (irq_bits == 32) {
+-              dispatch_internal = __dispatch_internal_32;
+-              internal_irq_mask = __internal_irq_mask_32;
+-              internal_irq_unmask = __internal_irq_unmask_32;
+-      } else {
+-              dispatch_internal = __dispatch_internal_64;
+-              internal_irq_mask = __internal_irq_mask_64;
+-              internal_irq_unmask = __internal_irq_unmask_64;
+-      }
+-}
+-
+-void __init arch_init_irq(void)
+-{
+-      int i;
+-
+-      bcm63xx_init_irq();
+       mips_cpu_irq_init();
+-      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
+-              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
+-                                       handle_level_irq);
+-
+-      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
+-              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
+-                                       handle_edge_irq);
+-
+-      if (!is_ext_irq_cascaded) {
+-              for (i = 3; i < 3 + ext_irq_count; ++i)
+-                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+-      }
+-
+-      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+-#ifdef CONFIG_SMP
+-      if (is_ext_irq_cascaded) {
+-              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+-              bcm63xx_internal_irq_chip.irq_set_affinity =
+-                      bcm63xx_internal_set_affinity;
+-
+-              cpumask_clear(irq_default_affinity);
+-              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
+-      }
+-#endif
++      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
++                               periph_width);
++      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
++      if (ext_irq_count > 4)
++              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
++                                    ext_shift);
+ }
diff --git a/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
new file mode 100644 (file)
index 0000000..e911f0e
--- /dev/null
@@ -0,0 +1,57 @@
+From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 20:20:30 +0100
+Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
+ and 5
+
+Due to the external interrupts being non consecutive, the previous
+implementation did not support them. Now that we treat both registers
+as separate irq controllers, there is no such limitation anymore and
+we can expose them for drivers to use.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c                           |    5 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
+ 3 files changed, 7 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
+               periph_width = 1;
+               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
+-              ext_irq_count = 4;
++              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
++              ext_irq_count = 6;
+               ext_irqs[0] = BCM_6358_EXT_IRQ0;
+               ext_irqs[1] = BCM_6358_EXT_IRQ1;
+               ext_irqs[2] = BCM_6358_EXT_IRQ2;
+               ext_irqs[3] = BCM_6358_EXT_IRQ3;
++              ext_irqs[4] = BCM_6358_EXT_IRQ4;
++              ext_irqs[5] = BCM_6358_EXT_IRQ5;
+               ext_shift = 4;
+               break;
+       case BCM6362_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -896,6 +896,8 @@ enum bcm63xx_irq {
+ #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
+ #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
+ #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
++#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
++#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
+ /*
+  * 6362 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -244,6 +244,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
++#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+ /* for 6348 only */
diff --git a/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
new file mode 100644 (file)
index 0000000..07d3f9d
--- /dev/null
@@ -0,0 +1,77 @@
+From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:08:36 +0100
+Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
+ 2 files changed, 28 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
+ u16 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
++static u32 bcm63xx_cpu_variant __read_mostly;
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
+ };
++u32 bcm63xx_get_cpu_variant(void)
++{
++      return bcm63xx_cpu_variant;
++}
++
++EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
++
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+       return bcm63xx_cpu_rev;
+@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -20,6 +20,7 @@
+ #define BCM6368_CPU_ID                0x6368
+ void __init bcm63xx_cpu_init(void);
++u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_3368() \
++      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6328() \
++      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_6338() \
++      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
++#define BCMCPU_VARIANT_IS_6345() \
++      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
++#define BCMCPU_VARIANT_IS_6348() \
++      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
++#define BCMCPU_VARIANT_IS_6358() \
++      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6362() \
++      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
++#define BCMCPU_VARIANT_IS_6368() \
++      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+  * address of these sets do change.
diff --git a/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch
new file mode 100644 (file)
index 0000000..57af836
--- /dev/null
@@ -0,0 +1,23 @@
+From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:22:41 +0100
+Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
+
+Some SoC have a variant id field in the chip id register.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -10,6 +10,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_VARID_SHIFT                       12
++#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+ #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
new file mode 100644 (file)
index 0000000..a05a4b3
--- /dev/null
@@ -0,0 +1,68 @@
+From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:30:59 +0100
+Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
+ 2 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
+       unsigned int tmp;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+       chipid_reg = 0;
+@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
++      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6328_CPU_ID:
+               bcm63xx_regs_base = bcm6328_regs_base;
+               bcm63xx_irqs = bcm6328_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
++              else if (varid == 3)
++                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
++              else
++                      pr_warn("unknown BCM6328 variant: %x\n", varid);
++
+               break;
+       case BCM6338_CPU_ID:
+               bcm63xx_regs_base = bcm6338_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -12,6 +12,8 @@
+  */
+ #define BCM3368_CPU_ID                0x3368
+ #define BCM6328_CPU_ID                0x6328
++#define BCM63281_CPU_ID               0x63281
++#define BCM63283_CPU_ID               0x63283
+ #define BCM6338_CPU_ID                0x6338
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+-#define BCMCPU_VARIANT_IS_6328() \
+-      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_63281() \
++      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
++#define BCMCPU_VARIANT_IS_63283() \
++      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6338() \
+       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
new file mode 100644 (file)
index 0000000..2efbf36
--- /dev/null
@@ -0,0 +1,46 @@
+From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:33:28 +0100
+Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 11 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6362_CPU_ID:
+               bcm63xx_regs_base = bcm6362_regs_base;
+               bcm63xx_irqs = bcm6362_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
++              else if (varid == 2)
++                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
++              else
++                      pr_warn("unknown BCM6362 variant: %x\n", varid);
++
+               break;
+       case BCM6368_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -18,6 +18,7 @@
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+ #define BCM6358_CPU_ID                0x6358
++#define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6358() \
+       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6361() \
++      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6362() \
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
new file mode 100644 (file)
index 0000000..64bcd8f
--- /dev/null
@@ -0,0 +1,48 @@
+From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:36:56 +0100
+Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
+
+The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
+from missing DSL, there is no difference to BCM6368, so treat it such.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          | 4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       case BCM6368_CPU_ID:
++      case BCM6369_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+               bcm63xx_irqs = bcm6368_irqs;
++
++              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
++              bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -21,6 +21,7 @@
+ #define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
++#define BCM6369_CPU_ID                0x6369
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6369() \
++      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
new file mode 100644 (file)
index 0000000..54900d7
--- /dev/null
@@ -0,0 +1,20 @@
+From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:05:54 +0100
+Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -42,7 +42,7 @@
+                                       BCM_CB_MEM_SIZE - 1)
+ #define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
++#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
new file mode 100644 (file)
index 0000000..05142a8
--- /dev/null
@@ -0,0 +1,70 @@
+From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:13:06 +0100
+Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
+
+Different SoCs use different memory windows (and sizes), so don't
+hardcode it.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
+ arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
+ 2 files changed, 14 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,10 +41,10 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
+-#define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+-#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+-                                      BCM_PCIE_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
++#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
++                                      BCM_PCIE_MEM_SIZE_6328 - 1)
+ /*
+  * Internal registers are accessed through KSEG3
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
+ static struct resource bcm_pcie_mem_resource = {
+       .name   = "bcm63xx PCIe memory space",
+-      .start  = BCM_PCIE_MEM_BASE_PA,
+-      .end    = BCM_PCIE_MEM_END_PA,
++      .start  = 0,
++      .end    = 0,
+       .flags  = IORESOURCE_MEM,
+ };
+@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+       /* set bar0 to little endian */
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+       val |= BASEMASK_REMAP_EN;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+       register_pci_controller(&bcm63xx_pcie_controller);
+@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      }
++
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
new file mode 100644 (file)
index 0000000..c38b431
--- /dev/null
@@ -0,0 +1,56 @@
+From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:54:51 +0100
+Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+-u16 bcm63xx_cpu_id __read_mostly;
++u32 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
+ static u32 bcm63xx_cpu_variant __read_mostly;
+@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
+ static unsigned int detect_cpu_clock(void)
+ {
+-      u16 cpu_id = bcm63xx_get_cpu_id();
++      u32 cpu_id = bcm63xx_get_cpu_id();
+       switch (cpu_id) {
+       case BCM3368_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+-static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
+ {
+       switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
+       return cpu_id;
+ }
+-extern u16 bcm63xx_cpu_id;
++extern u32 bcm63xx_cpu_id;
+-static inline u16 __pure bcm63xx_get_cpu_id(void)
++static inline u32 __pure bcm63xx_get_cpu_id(void)
+ {
+-      const u16 cpu_id = bcm63xx_cpu_id;
++      const u32 cpu_id = bcm63xx_cpu_id;
+       return __bcm63xx_get_cpu_id(cpu_id);
+ }
diff --git a/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
new file mode 100644 (file)
index 0000000..1809a3c
--- /dev/null
@@ -0,0 +1,39 @@
+From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:46:26 +0100
+Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
+
+Newer SoCs have 128 bit wide irq registers, thus 128 available internal
+interupts.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
+ arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
+@@ -2,10 +2,12 @@
+ #ifndef BCM63XX_IRQ_H_
+ #define BCM63XX_IRQ_H_
++#include <irq.h>
+ #include <bcm63xx_cpu.h>
+ #define IRQ_INTERNAL_BASE             8
+-#define IRQ_EXTERNAL_BASE             100
++#define NR_INTERNAL_IRQS              128
++#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
+ #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
+ #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
+ #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
+--- a/arch/mips/include/asm/mach-bcm63xx/irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
+@@ -2,7 +2,7 @@
+ #ifndef __ASM_MACH_BCM63XX_IRQ_H
+ #define __ASM_MACH_BCM63XX_IRQ_H
+-#define NR_IRQS 128
++#define NR_IRQS 256
+ #define MIPS_CPU_IRQ_BASE 0
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..65ca976
--- /dev/null
@@ -0,0 +1,737 @@
+From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 17:14:17 +0100
+Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
+ arch/mips/bcm63xx/dev-flash.c                     |   6 +
+ arch/mips/bcm63xx/dev-spi.c                       |   4 +-
+ arch/mips/bcm63xx/irq.c                           |  20 +++-
+ arch/mips/bcm63xx/reset.c                         |  21 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 12 files changed, 342 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++
++config BCM63XX_CPU_63268
++      bool "support 63268 CPU"
++      select SYS_HAS_CPU_BMIPS4350
++      select HW_HAS_PCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -697,7 +697,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
+                       clk_disable_unlocked(&clk_swpkt_sar);
+               }
+               bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
++      } else if (BCMCPU_IS_63268()) {
++              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
+       } else {
+               return;
+       }
+@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+       else
+               return;
+@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
+       else
+               return;
+@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
+               mask = CKCTL_6358_SPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_SPI_EN;
+-      else
+-              /* BCMCPU_IS_6368 */
++      else if (BCMCPU_IS_6368())
+               mask = CKCTL_6368_SPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_SPI_EN;
++      else
++              return;
++
+       bcm_hwclock_set(mask, enable);
+ }
+@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_HSSPI_EN;
+       else
+               return;
+@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+       else if (BCMCPU_IS_6362())
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
+ }
+ static struct clk clk_pcie = {
+@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
+       CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
+ };
++static struct clk_lookup bcm63268_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++};
++
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
+       case BCM6368_CPU_ID:
+               clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
+               break;
++      case BCM63268_CPU_ID:
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
++              clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
++              break;
+       }
+       return 0;
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
+ };
++static const unsigned long bcm63268_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(63268)
++};
++
++static const int bcm63268_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(63268)
++
++};
++
+ u32 bcm63xx_get_cpu_variant(void)
+ {
+       return bcm63xx_cpu_variant;
+@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
+               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
+       }
++      case BCM63268_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
++                              STRAPBUS_63268_FCVO_SHIFT;
++              switch (mips_pll_fcvo) {
++              case 0x3:
++              case 0xe:
++                      return 320000000;
++              case 0xa:
++                      return 333000000;
++              case 0x2:
++              case 0xb:
++              case 0xf:
++                      return 400000000;
++              default:
++                      return 0;
++              }
++      }
+       default:
+               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
+@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+       if (BCMCPU_IS_6345()) {
+@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
+       unsigned int tmp;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      bool long_chipid = false;
+       u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
+               case 0x10:
+                       chipid_reg = BCM_6345_PERF_BASE;
+                       break;
++              case 0x80:
++                      long_chipid = true;
++                      /* fall-through */
+               default:
+                       chipid_reg = BCM_6368_PERF_BASE;
+                       break;
+@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       }
++
+       /*
+        * really early to panic, but delaying panic would not help since we
+        * will never get any working console
+@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+-      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+-      bcm63xx_cpu_variant = bcm63xx_cpu_id;
++
++      if (long_chipid) {
++              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
++              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
++      } else {
++              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      }
++
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+-      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
+               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
+               bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
++      case BCM63168_CPU_ID:
++      case BCM63169_CPU_ID:
++      case BCM63268_CPU_ID:
++      case BCM63269_CPU_ID:
++              bcm63xx_regs_base = bcm63268_regs_base;
++              bcm63xx_irqs = bcm63268_irqs;
++
++              bcm63xx_cpu_id = BCM63268_CPU_ID;
++              break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+               break;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
+               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+                       return BCM63XX_FLASH_TYPE_PARALLEL;
+               }
++      case BCM63268_CPU_ID:
++              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
++                      return BCM63XX_FLASH_TYPE_SERIAL;
++              else
++                      return BCM63XX_FLASH_TYPE_NAND;
+       default:
+               return -EINVAL;
+       }
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
+       }
+       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-              BCMCPU_IS_6368()) {
++              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+               bcm63xx_spi_device.name = "bcm6358-spi",
+               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+       }
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
+               ext_irqs[5] = BCM_6368_EXT_IRQ5;
+               ext_shift = 4;
+               break;
++      case BCM63268_CPU_ID:
++              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
++              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
++              periph_irq_count = 2;
++              periph_width = 4;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_63268_EXT_IRQ0;
++              ext_irqs[1] = BCM_63268_EXT_IRQ1;
++              ext_irqs[2] = BCM_63268_EXT_IRQ2;
++              ext_irqs[3] = BCM_63268_EXT_IRQ3;
++              ext_shift = 4;
++              break;
+       default:
+               BUG();
+       }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -126,6 +126,20 @@
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
++#define BCM63268_RESET_ENET   0
++#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
++#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
++#define BCM63268_RESET_DSL    0
++#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
++#define BCM63268_RESET_EPHY   0
++#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
++#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
++#define BCM63268_RESET_MPI    0
++#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
++                               SOFTRESET_63268_PCIE_CORE_MASK)
++#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++
+ /*
+  * core reset bits
+  */
+@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(6368)
+ };
++static const u32 bcm63268_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(63268)
++};
++
+ const u32 *bcm63xx_reset_bits;
+ static int reset_reg;
+@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
+       } else if (BCMCPU_IS_6368()) {
+               reset_reg = PERF_SOFTRESET_6368_REG;
+               bcm63xx_reset_bits = bcm6368_reset_bits;
++      } else if (BCMCPU_IS_63268()) {
++              reset_reg = PERF_SOFTRESET_63268_REG;
++              bcm63xx_reset_bits = bcm63268_reset_bits;
+       }
+       return 0;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -22,6 +22,10 @@
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+ #define BCM6369_CPU_ID                0x6369
++#define BCM63168_CPU_ID               0x63168
++#define BCM63169_CPU_ID               0x63169
++#define BCM63268_CPU_ID               0x63268
++#define BCM63269_CPU_ID               0x63269
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c
+ #ifdef CONFIG_BCM63XX_CPU_6368
+               case BCM6368_CPU_ID:
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_63268
++              case BCM63268_CPU_ID:
++#endif
+               break;
+       default:
+               unreachable();
+@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6369() \
+       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
++#define BCMCPU_VARIANT_IS_63168() \
++      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
++#define BCMCPU_VARIANT_IS_63169() \
++      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
++#define BCMCPU_VARIANT_IS_63268() \
++      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
++#define BCMCPU_VARIANT_IS_63269() \
++      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+@@ -574,6 +591,52 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_RNG_BASE             (0xb0004180)
+ #define BCM_6368_MISC_BASE            (0xdeadbeef)
++/*
++ * 63268 register sets base address
++ */
++#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
++#define BCM_63268_PERF_BASE           (0xb0000000)
++#define BCM_63268_TIMER_BASE          (0xb0000080)
++#define BCM_63268_WDT_BASE            (0xb000009c)
++#define BCM_63268_UART0_BASE          (0xb0000180)
++#define BCM_63268_UART1_BASE          (0xb00001a0)
++#define BCM_63268_GPIO_BASE           (0xb00000c0)
++#define BCM_63268_SPI_BASE            (0xb0000800)
++#define BCM_63268_HSSPI_BASE          (0xb0001000)
++#define BCM_63268_UDC0_BASE           (0xdeadbeef)
++#define BCM_63268_USBDMA_BASE         (0xb000c800)
++#define BCM_63268_OHCI0_BASE          (0xb0002600)
++#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
++#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
++#define BCM_63268_USBD_BASE           (0xb0002400)
++#define BCM_63268_MPI_BASE            (0xdeadbeef)
++#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
++#define BCM_63268_PCIE_BASE           (0xb06e0000)
++#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
++#define BCM_63268_DSL_BASE            (0xdeadbeef)
++#define BCM_63268_UBUS_BASE           (0xdeadbeef)
++#define BCM_63268_ENET0_BASE          (0xdeadbeef)
++#define BCM_63268_ENET1_BASE          (0xdeadbeef)
++#define BCM_63268_ENETDMA_BASE                (0xb000d800)
++#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
++#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
++#define BCM_63268_ENETSW_BASE         (0xb0700000)
++#define BCM_63268_EHCI0_BASE          (0xb0002500)
++#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
++#define BCM_63268_MEMC_BASE           (0xdeadbeef)
++#define BCM_63268_DDR_BASE            (0xb0003000)
++#define BCM_63268_M2M_BASE            (0xdeadbeef)
++#define BCM_63268_ATM_BASE            (0xdeadbeef)
++#define BCM_63268_XTM_BASE            (0xb0007000)
++#define BCM_63268_XTMDMA_BASE         (0xb000b800)
++#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_PCM_BASE            (0xb000b000)
++#define BCM_63268_PCMDMA_BASE         (0xb000b800)
++#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_RNG_BASE            (0xdeadbeef)
++#define BCM_63268_MISC_BASE           (0xb0001800)
+ extern const unsigned long *bcm63xx_regs_base;
+@@ -1042,6 +1105,73 @@ enum bcm63xx_irq {
+ #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
+ #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
++/*
++ * 63268 irqs
++ */
++#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
++#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
++
++#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
++#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
++#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
++#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
++#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
++#define BCM_63268_UDC0_IRQ            0
++#define BCM_63268_ENET0_IRQ           0
++#define BCM_63268_ENET1_IRQ           0
++#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
++#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
++#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
++#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
++#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
++#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
++#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
++#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
++#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
++#define BCM_63268_PCMCIA_IRQ          0
++#define BCM_63268_ENET0_RXDMA_IRQ     0
++#define BCM_63268_ENET0_TXDMA_IRQ     0
++#define BCM_63268_ENET1_RXDMA_IRQ     0
++#define BCM_63268_ENET1_TXDMA_IRQ     0
++#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
++#define BCM_63268_ATM_IRQ             0
++#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
++#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
++#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
++#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
++#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
++#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
++#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
++#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
++#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
++#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
++
++#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
++#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
++#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
++#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
++#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
++#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
++#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
++#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
++#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
++#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
++#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
++#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
++#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
++#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
++#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
++#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
++#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
++#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
++#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
++#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
++#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
++
+ extern const int *bcm63xx_irqs;
+ #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
+               return 48;
+       case BCM6368_CPU_ID:
+               return 38;
++      case BCM63268_CPU_ID:
++              return 52;
+       case BCM6348_CPU_ID:
+       default:
+               return 37;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -10,6 +10,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_LONG_CHIPID_SHIFT         12
++#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
+ #define REV_VARID_SHIFT                       12
+ #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+@@ -212,6 +214,52 @@
+                                       CKCTL_6368_NAND_EN |            \
+                                       CKCTL_6368_IPSEC_EN)
++#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
++#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
++#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
++#define CKCTL_63268_VDSL_EN           (1 << 3)
++#define CKCTL_63268_MIPS_EN           (1 << 4)
++#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
++#define CKCTL_63268_DECT_EN           (1 << 6)
++#define CKCTL_63268_FAP0_EN           (1 << 7)
++#define CKCTL_63268_FAP1_EN           (1 << 8)
++#define CKCTL_63268_SAR_EN            (1 << 9)
++#define CKCTL_63268_ROBOSW_EN         (1 << 10)
++#define CKCTL_63268_PCM_EN            (1 << 11)
++#define CKCTL_63268_USBD_EN           (1 << 12)
++#define CKCTL_63268_USBH_EN           (1 << 13)
++#define CKCTL_63268_IPSEC_EN          (1 << 14)
++#define CKCTL_63268_SPI_EN            (1 << 15)
++#define CKCTL_63268_HSSPI_EN          (1 << 16)
++#define CKCTL_63268_PCIE_EN           (1 << 17)
++#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
++#define CKCTL_63268_GMAC_EN           (1 << 19)
++#define CKCTL_63268_NAND_EN           (1 << 20)
++#define CKCTL_63268_TBUS_EN           (1 << 27)
++#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
++
++#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
++                                      CKCTL_63268_VDSL_AFE_EN |       \
++                                      CKCTL_63268_VDSL_EN |           \
++                                      CKCTL_63268_WLAN_OCP_EN |       \
++                                      CKCTL_63268_DECT_EN |           \
++                                      CKCTL_63268_FAP0_EN |           \
++                                      CKCTL_63268_FAP1_EN |           \
++                                      CKCTL_63268_SAR_EN |            \
++                                      CKCTL_63268_ROBOSW_EN |         \
++                                      CKCTL_63268_PCM_EN |            \
++                                      CKCTL_63268_USBD_EN |           \
++                                      CKCTL_63268_USBH_EN |           \
++                                      CKCTL_63268_IPSEC_EN |          \
++                                      CKCTL_63268_SPI_EN |            \
++                                      CKCTL_63268_HSSPI_EN |          \
++                                      CKCTL_63268_PCIE_EN |           \
++                                      CKCTL_63268_PHYMIPS_EN |        \
++                                      CKCTL_63268_GMAC_EN |           \
++                                      CKCTL_63268_NAND_EN |           \
++                                      CKCTL_63268_TBUS_EN |           \
++                                      CKCTL_63268_ROBOSW250_EN)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+@@ -225,6 +273,7 @@
+ #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
+ #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
++#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
+@@ -235,6 +284,7 @@
+ #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
+ #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
+@@ -245,6 +295,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6358      0x14
+ #define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
++#define PERF_EXTIRQ_CFG_REG_63268     0x18
+ #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+@@ -275,6 +326,7 @@
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+ #define PERF_SOFTRESET_6368_REG               0x10
++#define PERF_SOFTRESET_63268_REG      0x10
+ #define SOFTRESET_3368_SPI_MASK               (1 << 0)
+ #define SOFTRESET_3368_ENET_MASK      (1 << 2)
+@@ -368,6 +420,26 @@
+ #define SOFTRESET_6368_USBH_MASK      (1 << 12)
+ #define SOFTRESET_6368_PCM_MASK               (1 << 13)
++#define SOFTRESET_63268_SPI_MASK      (1 << 0)
++#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
++#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
++#define SOFTRESET_63268_SAR_MASK      (1 << 3)
++#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
++#define SOFTRESET_63268_USBS_MASK     (1 << 5)
++#define SOFTRESET_63268_USBH_MASK     (1 << 6)
++#define SOFTRESET_63268_PCM_MASK      (1 << 7)
++#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
++#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
++#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
++#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
++#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
++#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
++#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
++#define SOFTRESET_63268_DECT_MASK     (1 << 15)
++#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
++#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
++#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
++
+ /* MIPS PLL control register */
+ #define PERF_MIPSPLLCTL_REG           0x34
+ #define MIPSPLLCTL_N1_SHIFT           20
+@@ -1367,6 +1439,13 @@
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
++#define MISC_STRAPBUS_63268_REG               0x14
++#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
++#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
++#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
++#define STRAPBUS_63268_FCVO_SHIFT     21
++#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
++      case BCM63268_CPU_ID:
+               if (offset >= 0xb0000000 && offset < 0xb1000000)
+                       return 1;
+               break;
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,7 +176,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++              BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -284,7 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -305,6 +307,8 @@ bcm63xx_enetsw_register(const struct bcm
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
++      else if (BCMCPU_IS_63268())
++              enetsw_pd.num_ports = ENETSW_PORTS_63268;
+       enetsw_pd.dma_has_sram = true;
+       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
+ #define ENETSW_MAX_PORT       8
+ #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
+ #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
++#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
+ #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..e9f9e2b
--- /dev/null
@@ -0,0 +1,55 @@
+From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:22:40 +0100
+Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
+
+---
+ arch/mips/bcm63xx/reset.c                       | 3 ++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
+ arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
+ 3 files changed, 11 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -137,7 +137,8 @@
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+ #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK)
++                               SOFTRESET_63268_PCIE_CORE_MASK | \
++                               SOFTRESET_63268_PCIE_HARD_MASK)
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -46,6 +46,11 @@
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+                                       BCM_PCIE_MEM_SIZE_6328 - 1)
++#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
++#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
++                                      BCM_PCIE_MEM_SIZE_63268 - 1)
++
+ /*
+  * Internal registers are accessed through KSEG3
+  */
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      } else if (BCMCPU_IS_63268()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
+       }
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
++      case BCM63268_CPU_ID:
+               return bcm63xx_register_pcie();
+       case BCM3368_CPU_ID:
+       case BCM6348_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..1b2cbfb
--- /dev/null
@@ -0,0 +1,697 @@
+From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 01:24:09 +0100
+Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
+
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |   8 +-
+ arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
+ arch/mips/bcm63xx/dev-flash.c                     |   3 +
+ arch/mips/bcm63xx/dev-spi.c                       |   2 +-
+ arch/mips/bcm63xx/irq.c                           |  10 ++
+ arch/mips/bcm63xx/prom.c                          |   2 +-
+ arch/mips/bcm63xx/reset.c                         |  24 +++++
+ arch/mips/bcm63xx/setup.c                         |   5 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 13 files changed, 291 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -19,6 +19,11 @@ config BCM63XX_EHCI
+       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++config BCM63XX_CPU_6318
++      bool "support 6318 CPU"
++      select SYS_HAS_CPU_BMIPS32_3300
++      select HW_HAS_PCI
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -697,7 +697,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
+ {
+       u32 mask;
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318())
++              mask = CKCTL_6318_HSSPI_EN;
++      else if (BCMCPU_IS_6328())
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
+@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
+       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
+ };
++static struct clk_lookup bcm6318_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbh),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++};
++
+ static struct clk_lookup bcm6328_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
+       CLKDEV_INIT(NULL, "pcie", &clk_pcie),
+ };
++#define HSSPI_PLL_HZ_6318     250000000
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
+       case BCM3368_CPU_ID:
+               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
+               break;
++      case BCM6318_CPU_ID:
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
++              clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
++              break;
+       case BCM6328_CPU_ID:
+               clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
+               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
+       __GEN_CPU_IRQ_TABLE(3368)
+ };
++static const unsigned long bcm6318_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(6318)
++};
++
++static const int bcm6318_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(6318)
++};
++
+ static const unsigned long bcm6328_regs_base[] = {
+       __GEN_CPU_REGS_TABLE(6328)
+ };
+@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
+       return bcm63xx_memory_size;
+ }
++#define STRAP_OVERRIDE_BUS_REG                0x0
++#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
++#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
++
+ static unsigned int detect_cpu_clock(void)
+ {
+       u32 cpu_id = bcm63xx_get_cpu_id();
+@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
+       case BCM3368_CPU_ID:
+               return 300000000;
++      case BCM6318_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
++
++              pr_info("strap_override_bus = %08x\n", tmp);
++
++              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
++                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
++
++              switch (mips_pll_fcvo) {
++              case 0:
++                      return 166000000;
++              case 1:
++                      return 400000000;
++              case 2:
++                      return 250000000;
++              case 3:
++                      return 333000000;
++              };
++      }
+       case BCM6328_CPU_ID:
+       {
+               unsigned int tmp, mips_pll_fcvo;
+@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
++      if (BCMCPU_IS_6318()) {
++              val = bcm_sdram_readl(SDRAM_CFG_REG);
++              val = val & SDRAM_CFG_6318_SPACE_MASK;
++              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
++              return 1 << (val + 20);
++      }
++
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
+       switch (current_cpu_type()) {
+       case CPU_BMIPS3300:
++              if ((read_c0_prid() & 0xff) >= 0x33) {
++                      /* BCM6318 */
++                      chipid_reg = BCM_6368_PERF_BASE;
++                      break;
++              }
++
+               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
+                       __cpu_name[cpu] = "Broadcom BCM6338";
+               /* fall-through */
+@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
++      case BCM6318_CPU_ID:
++              bcm63xx_regs_base = bcm6318_regs_base;
++              bcm63xx_irqs = bcm6318_irqs;
++              break;
+       case BCM3368_CPU_ID:
+               bcm63xx_regs_base = bcm3368_regs_base;
+               bcm63xx_irqs = bcm3368_irqs;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
+       u32 val;
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              /* only support serial flash */
++              return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
+ int __init bcm63xx_spi_register(void)
+ {
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
+               ext_irqs[3] = BCM_3368_EXT_IRQ3;
+               ext_shift = 4;
+               break;
++      case BCM6318_CPU_ID:
++              periph_bases[0] += PERF_IRQMASK_6318_REG;
++              periph_irq_count = 1;
++              periph_width = 4;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6318_EXT_IRQ0;
++              ext_irqs[1] = BCM_6318_EXT_IRQ0;
++              ext_irqs[2] = BCM_6318_EXT_IRQ0;
++              ext_irqs[3] = BCM_6318_EXT_IRQ0;
++              ext_shift = 4;
++              break;
+       case BCM6328_CPU_ID:
+               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
+               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -68,7 +68,7 @@ void __init prom_init(void)
+                       if (reg & OTP_6328_REG3_TP1_DISABLED)
+                               bmips_smp_enabled = 0;
+-              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
++              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+                       bmips_smp_enabled = 0;
+               }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -44,6 +44,23 @@
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++
++#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
++#define BCM6318_RESET_ENET    0
++#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
++#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
++#define BCM6318_RESET_DSL     0
++#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
++#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
++#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
++#define BCM6318_RESET_PCM     0
++#define BCM6318_RESET_MPI     0
++#define BCM6318_RESET_PCIE    \
++                              (SOFTRESET_6318_PCIE_MASK |             \
++                               SOFTRESET_6318_PCIE_CORE_MASK |        \
++                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+ #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
+@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(3368)
+ };
++static const u32 bcm6318_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(6318)
++};
++
+ static const u32 bcm6328_reset_bits[] = {
+       __GEN_RESET_BITS_TABLE(6328)
+ };
+@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
+       if (BCMCPU_IS_3368()) {
+               reset_reg = PERF_SOFTRESET_6358_REG;
+               bcm63xx_reset_bits = bcm3368_reset_bits;
++      } else if (BCMCPU_IS_6318()) {
++              reset_reg = PERF_SOFTRESET_6318_REG;
++              bcm63xx_reset_bits = bcm6318_reset_bits;
+       } else if (BCMCPU_IS_6328()) {
+               reset_reg = PERF_SOFTRESET_6328_REG;
+               bcm63xx_reset_bits = bcm6328_reset_bits;
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
+       case BCM3368_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+               break;
++      case BCM6318_CPU_ID:
++              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
++              break;
+       case BCM6328_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+               break;
+@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
+               bcm6348_a1_reboot();
+       pr_info("triggering watchdog soft-reset...\n");
+-      if (BCMCPU_IS_6328()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
+               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+       } else {
+               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -11,6 +11,7 @@
+  * arm mach-types)
+  */
+ #define BCM3368_CPU_ID                0x3368
++#define BCM6318_CPU_ID                0x6318
+ #define BCM6328_CPU_ID                0x6328
+ #define BCM63281_CPU_ID               0x63281
+ #define BCM63283_CPU_ID               0x63283
+@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
+               case BCM3368_CPU_ID:
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++              case BCM6318_CPU_ID:
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6328
+               case BCM6328_CPU_ID:
+ #endif
+@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ }
+ #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
+ #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+ #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+ #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6318() \
++      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63281() \
+       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63283() \
+@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
+ #define BCM_3368_MISC_BASE            (0xdeadbeef)
+ /*
++ * 6318 register sets base address
++ */
++#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
++#define BCM_6318_PERF_BASE            (0xb0000000)
++#define BCM_6318_TIMER_BASE           (0xb0000040)
++#define BCM_6318_WDT_BASE             (0xb0000068)
++#define BCM_6318_UART0_BASE           (0xb0000100)
++#define BCM_6318_UART1_BASE           (0xdeadbeef)
++#define BCM_6318_GPIO_BASE            (0xb0000080)
++#define BCM_6318_SPI_BASE             (0xdeadbeef)
++#define BCM_6318_HSSPI_BASE           (0xb0003000)
++#define BCM_6318_UDC0_BASE            (0xdeadbeef)
++#define BCM_6318_USBDMA_BASE          (0xb0006800)
++#define BCM_6318_OHCI0_BASE           (0xb0005100)
++#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
++#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
++#define BCM_6318_USBD_BASE            (0xb0006000)
++#define BCM_6318_MPI_BASE             (0xdeadbeef)
++#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
++#define BCM_6318_PCIE_BASE            (0xb0010000)
++#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
++#define BCM_6318_DSL_BASE             (0xdeadbeef)
++#define BCM_6318_UBUS_BASE            (0xdeadbeef)
++#define BCM_6318_ENET0_BASE           (0xdeadbeef)
++#define BCM_6318_ENET1_BASE           (0xdeadbeef)
++#define BCM_6318_ENETDMA_BASE         (0xb0088000)
++#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
++#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
++#define BCM_6318_ENETSW_BASE          (0xb0080000)
++#define BCM_6318_EHCI0_BASE           (0xb0005000)
++#define BCM_6318_SDRAM_BASE           (0xb0004000)
++#define BCM_6318_MEMC_BASE            (0xdeadbeef)
++#define BCM_6318_DDR_BASE             (0xdeadbeef)
++#define BCM_6318_M2M_BASE             (0xdeadbeef)
++#define BCM_6318_ATM_BASE             (0xdeadbeef)
++#define BCM_6318_XTM_BASE             (0xdeadbeef)
++#define BCM_6318_XTMDMA_BASE          (0xb000c000)
++#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_PCM_BASE             (0xdeadbeef)
++#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
++#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_RNG_BASE             (0xdeadbeef)
++#define BCM_6318_MISC_BASE            (0xb0000280)
++#define BCM_6318_OTP_BASE             (0xdeadbeef)
++
++#define BCM_6318_STRAP_BASE           (0xb0000900)
++
++/*
+  * 6328 register sets base address
+  */
+ #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
+@@ -775,6 +833,55 @@ enum bcm63xx_irq {
+ #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
+ #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
++/*
++ * 6318 irqs
++ */
++#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
++#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
++
++#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
++#define BCM_6318_SPI_IRQ              0
++#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
++#define BCM_6318_UART1_IRQ            0
++#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
++#define BCM_6318_UDC0_IRQ             0
++#define BCM_6318_ENET0_IRQ            0
++#define BCM_6318_ENET1_IRQ            0
++#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
++#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
++#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
++#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
++#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
++#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
++#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
++#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
++#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
++#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
++#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
++#define BCM_6318_PCMCIA_IRQ           0
++#define BCM_6318_ENET0_RXDMA_IRQ      0
++#define BCM_6318_ENET0_TXDMA_IRQ      0
++#define BCM_6318_ENET1_RXDMA_IRQ      0
++#define BCM_6318_ENET1_TXDMA_IRQ      0
++#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
++#define BCM_6318_ATM_IRQ              0
++#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
++#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
++#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
++#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
++#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
++#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
++#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
++#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
++#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
++#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
++
++#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
++#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
++#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
++#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
++#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
++#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
+ /*
+  * 6328 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -53,6 +53,39 @@
+                                        CKCTL_3368_EMUSB_EN | \
+                                        CKCTL_3368_USBU_EN)
++#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
++#define CKCTL_6318_USB_ASB_EN         (1 << 1)
++#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
++#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
++#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
++#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
++#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
++#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
++#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
++#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
++#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
++#define CKCTL_6318_ADSL_EN            (1 << 11)
++#define CKCTL_6318_SAR125_EN          (1 << 12)
++#define CKCTL_6318_MIPS_EN            (1 << 13)
++#define CKCTL_6318_PCIE_EN            (1 << 14)
++#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
++#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
++#define CKCTL_6318_SDR_EN             (1 << 19)
++#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
++#define CKCTL_6318_HSSPI_EN           (1 << 25)
++#define CKCTL_6318_PCIE25_EN          (1 << 27)
++#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
++#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
++#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
++
++#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
++                                      CKCTL_6318_ADSL_QPROC_EN |      \
++                                      CKCTL_6318_ADSL_AFE_EN |        \
++                                      CKCTL_6318_ADSL_EN |            \
++                                      CKCTL_6318_SAR_EN  |            \
++                                      CKCTL_6318_USB_EN |             \
++                                      CKCTL_6318_PCIE_EN)
++
+ #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
+ #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
+ #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
+@@ -260,12 +293,27 @@
+                                       CKCTL_63268_TBUS_EN |           \
+                                       CKCTL_63268_ROBOSW250_EN)
++/* UBUS Clock Control register */
++#define PERF_UB_CKCTL_REG             0x10
++
++#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
++#define UB_CKCTL_6318_ARB_EN          (1 << 1)
++#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
++#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
++#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
++#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
++#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
++#define UB_CKCTL_6318_SAR_EN          (1 << 7)
++#define UB_CKCTL_6318_SDR_EN          (1 << 8)
++#define UB_CKCTL_6318_USB_EN          (1 << 9)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG         0xc
++#define PERF_IRQMASK_6318_REG         0x20
+ #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG         0xc
+ #define PERF_IRQMASK_6345_REG         0xc
+@@ -277,6 +325,7 @@
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
++#define PERF_IRQSTAT_6318_REG         0x30
+ #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG         0x10
+ #define PERF_IRQSTAT_6345_REG         0x10
+@@ -288,6 +337,7 @@
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
++#define PERF_EXTIRQ_CFG_REG_6318      0x18
+ #define PERF_EXTIRQ_CFG_REG_6328      0x18
+ #define PERF_EXTIRQ_CFG_REG_6338      0x14
+ #define PERF_EXTIRQ_CFG_REG_6345      0x14
+@@ -322,6 +372,7 @@
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG            0x28
++#define PERF_SOFTRESET_6318_REG               0x10
+ #define PERF_SOFTRESET_6328_REG               0x10
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+@@ -335,6 +386,18 @@
+ #define SOFTRESET_3368_USBS_MASK      (1 << 11)
+ #define SOFTRESET_3368_PCM_MASK               (1 << 13)
++#define SOFTRESET_6318_SPI_MASK               (1 << 0)
++#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
++#define SOFTRESET_6318_SAR_MASK               (1 << 2)
++#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
++#define SOFTRESET_6318_USBS_MASK      (1 << 4)
++#define SOFTRESET_6318_USBH_MASK      (1 << 5)
++#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
++#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
++#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
++#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
++#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
++
+ #define SOFTRESET_6328_SPI_MASK               (1 << 0)
+ #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
+ #define SOFTRESET_6328_SAR_MASK               (1 << 2)
+@@ -506,8 +569,17 @@
+ #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
+ #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
++#define TIMER_IRQMASK_6318_REG                0x0
++#define TIMER_IRQSTAT_6318_REG                0x4
++#define IRQSTATMASK_TIMER0            (1 << 0)
++#define IRQSTATMASK_TIMER1            (1 << 1)
++#define IRQSTATMASK_TIMER2            (1 << 2)
++#define IRQSTATMASK_TIMER3            (1 << 3)
++#define IRQSTATMASK_WDT                       (1 << 4)
++
+ /* Timer control register */
+ #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
++#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
+ #define TIMER_CTL0_REG                        0x4
+ #define TIMER_CTL1_REG                        0x8
+ #define TIMER_CTL2_REG                        0xC
+@@ -1254,6 +1326,8 @@
+ #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
+ #define SDRAM_CFG_BANK_SHIFT          13
+ #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
++#define SDRAM_CFG_6318_SPACE_SHIFT    4
++#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
+ #define SDRAM_MBASE_REG                       0xc
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
+               if (offset >= 0xfff00000)
+                       return 1;
+               break;
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-usb-usbd.c
++++ b/arch/mips/bcm63xx/dev-usb-usbd.c
+@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
+               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
+       int i;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+               return 0;
+       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,8 +176,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+-              BCMCPU_IS_63268())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++              BCMCPU_IS_6368() || BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -285,8 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
+-              !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -303,7 +303,7 @@ bcm63xx_enetsw_register(const struct bcm
+       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              return 50;
+       case BCM6328_CPU_ID:
+               return 32;
+       case BCM3368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
new file mode 100644 (file)
index 0000000..e359311
--- /dev/null
@@ -0,0 +1,156 @@
+From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 14:17:50 +0100
+Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
+
+---
+ arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
+ arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
+ 3 files changed, 34 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -29,7 +29,9 @@
+       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
+       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
+       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
+-      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
++      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
++      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
++      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
+ #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
+ #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
+@@ -43,6 +45,8 @@
+ #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++#define BCM3368_RESET_PCIE_CORE       0
++#define BCM3368_RESET_PCIE_HARD       0
+ #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
+@@ -55,11 +59,10 @@
+ #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
+ #define BCM6318_RESET_PCM     0
+ #define BCM6318_RESET_MPI     0
+-#define BCM6318_RESET_PCIE    \
+-                              (SOFTRESET_6318_PCIE_MASK |             \
+-                               SOFTRESET_6318_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
+ #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
++#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+@@ -71,11 +74,10 @@
+ #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
+ #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
+ #define BCM6328_RESET_MPI     0
+-#define BCM6328_RESET_PCIE    \
+-                              (SOFTRESET_6328_PCIE_MASK |             \
+-                               SOFTRESET_6328_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6328_PCIE_HARD_MASK)
++#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
+ #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
++#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
++#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
+ #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
+ #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
+@@ -89,6 +91,8 @@
+ #define BCM6338_RESET_MPI     0
+ #define BCM6338_RESET_PCIE    0
+ #define BCM6338_RESET_PCIE_EXT        0
++#define BCM6338_RESET_PCIE_CORE       0
++#define BCM6338_RESET_PCIE_HARD       0
+ #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
+ #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
+@@ -102,6 +106,8 @@
+ #define BCM6348_RESET_MPI     0
+ #define BCM6348_RESET_PCIE    0
+ #define BCM6348_RESET_PCIE_EXT        0
++#define BCM6348_RESET_PCIE_CORE       0
++#define BCM6348_RESET_PCIE_HARD       0
+ #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
+ #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
+@@ -115,6 +121,8 @@
+ #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
+ #define BCM6358_RESET_PCIE    0
+ #define BCM6358_RESET_PCIE_EXT        0
++#define BCM6358_RESET_PCIE_CORE       0
++#define BCM6358_RESET_PCIE_HARD       0
+ #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
+ #define BCM6362_RESET_ENET    0
+@@ -126,9 +134,10 @@
+ #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
+ #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
+ #define BCM6362_RESET_MPI     0
+-#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
+-                               SOFTRESET_6362_PCIE_CORE_MASK)
++#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
+ #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
++#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
++#define BCM6362_RESET_PCIE_HARD       0
+ #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
+ #define BCM6368_RESET_ENET    0
+@@ -142,6 +151,8 @@
+ #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM6368_RESET_PCIE_CORE       0
++#define BCM6368_RESET_PCIE_HARD       0
+ #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
+ #define BCM63268_RESET_ENET   0
+@@ -153,10 +164,10 @@
+ #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+-#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK | \
+-                               SOFTRESET_63268_PCIE_HARD_MASK)
++#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
++#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
+ /*
+  * core reset bits
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
+@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
+       BCM63XX_RESET_MPI,
+       BCM63XX_RESET_PCIE,
+       BCM63XX_RESET_PCIE_EXT,
++      BCM63XX_RESET_PCIE_CORE,
++      BCM63XX_RESET_PCIE_HARD,
+ };
+ void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
+       /* reset the PCIe core */
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
++              mdelay(10);
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
++      }
+       mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
+       mdelay(10);
diff --git a/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..3d9835d
--- /dev/null
@@ -0,0 +1,333 @@
+From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:47:34 +0100
+Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
+
+---
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
+ arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
+ arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
+ 5 files changed, 184 insertions(+), 29 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
+       bcm_perf_writel(reg, PERF_CKCTL_REG);
+ }
++static void bcm_ub_hwclock_set(u32 mask, int enable)
++{
++      u32 reg;
++
++      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
++      if (enable)
++              reg |= mask;
++      else
++              reg &= ~mask;
++      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
+ static void pcie_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
++              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
++      }
+ }
+ static struct clk clk_pcie = {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,6 +41,12 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
++#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
++                                      BCM_PCIE_MEM_SIZE_6318 - 1)
++
++
+ #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
+ #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1530,6 +1530,17 @@
+  * _REG relative to RSET_PCIE
+  *************************************************************************/
++#define PCIE_SPECIFIC_REG             0x188
++#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
++#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
++#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
++#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
++#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
++#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
++
+ #define PCIE_CONFIG2_REG              0x408
+ #define CONFIG2_BAR1_SIZE_EN          1
+ #define CONFIG2_BAR1_SIZE_MASK                0xf
+@@ -1575,7 +1586,54 @@
+ #define PCIE_RC_INT_C                 (1 << 2)
+ #define PCIE_RC_INT_D                 (1 << 3)
+-#define PCIE_DEVICE_OFFSET            0x8000
++#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
++#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
++#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
++#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
++#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
++#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
++#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
++
++#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
++#define RC_BAR_CFG_LO_SIZE_256MB      0xd
++#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
++#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
++
++#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
++#define C2P_BASELIMIT_LIMIT_SHIFT     20
++#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
++#define C2P_BASELIMIT_BASE_SHIFT      4
++#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
++
++#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
++#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
++#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
++#define BAR1_CFG_REMAP_ACCESS_EN      1
++
++#define PCIE_HARD_DEBUG_REG           0x4204
++#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
++
++#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
++#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
++#define CPU_INT_PCIE_INTA             (1 << 1)
++#define CPU_INT_PCIE_INTB             (1 << 2)
++#define CPU_INT_PCIE_INTC             (1 << 3)
++#define CPU_INT_PCIE_INTD             (1 << 4)
++#define CPU_INT_PCIE_INTR             (1 << 5)
++#define CPU_INT_PCIE_NMI              (1 << 6)
++#define CPU_INT_PCIE_UBUS             (1 << 7)
++#define CPU_INT_IPI                   (1 << 8)
++
++#define PCIE_EXT_CFG_INDEX_REG                0x8400
++#define EXT_CFG_FUNC_NUM_SHIFT                12
++#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
++#define EXT_CFG_DEV_NUM_SHIFT         15
++#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
++#define EXT_CFG_BUS_NUM_SHIFT         20
++#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
++
++#define PCIE_DEVICE_OFFSET_6318               0x9000
++#define PCIE_DEVICE_OFFSET_6328               0x8000
+ /*************************************************************************
+  * _REG relative to RSET_OTP
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
+ void __iomem *pci_iospace_start;
+-static void __init bcm63xx_reset_pcie(void)
++static void __init bcm63xx_reset_pcie_gen1(void)
+ {
+       u32 val;
+       u32 reg;
+@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
+       mdelay(200);
+ }
+-static struct clk *pcie_clk;
+-
+-static int __init bcm63xx_register_pcie(void)
++static void __init bcm63xx_reset_pcie_gen2(void)
+ {
+       u32 val;
+-      /* enable clock */
+-      pcie_clk = clk_get(NULL, "pcie");
+-      if (IS_ERR_OR_NULL(pcie_clk))
+-              return -ENODEV;
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
+-      clk_prepare_enable(pcie_clk);
++      /* reset the PCIe core */
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
++      mdelay(10);
++      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
++      val &= ~HARD_DEBUG_SERDES_IDDQ;
++      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
++      mdelay(200);
++}
+-      bcm63xx_reset_pcie();
++static void __init bcm63xx_init_pcie_gen1(void)
++{
++      u32 val;
+       /* configure the PCIe bridge */
+       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
+       val |= OPT2_CFG_TYPE1_BD_SEL;
+       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
++      /* set bar0 to little endian */
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
++      val |= BASEMASK_REMAP_EN;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
++
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
++}
++
++static void __init bcm63xx_init_pcie_gen2(void)
++{
++      u32 val;
++
++      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
++                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
++                      PCIE_CPU_INT1_MASK_CLEAR_REG);
++
++      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
++      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
++             C2P_BASELIMIT_BASE_SHIFT;
++
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
++
++      /* set bar0 to little endian */
++      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
++      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++
++      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
++      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
++      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
++
++      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
++                      PCIE_EXT_CFG_INDEX_REG);
++}
++
++static struct clk *pcie_clk;
++
++static int __init bcm63xx_register_pcie(void)
++{
++      u32 val;
++
++      /* enable clock */
++      pcie_clk = clk_get(NULL, "pcie");
++      if (IS_ERR_OR_NULL(pcie_clk))
++              return -ENODEV;
++
++      clk_prepare_enable(pcie_clk);
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++              bcm63xx_reset_pcie_gen1();
++              bcm63xx_init_pcie_gen1();
++      } else {
++              bcm63xx_reset_pcie_gen2();
++              bcm63xx_init_pcie_gen2();
++      }
++
+       /* setup class code as bridge */
+       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+       val &= ~IDVAL3_CLASS_CODE_MASK;
+@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
+       val &= ~CONFIG2_BAR1_SIZE_MASK;
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+-      /* set bar0 to little endian */
+-      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+-      val |= BASEMASK_REMAP_EN;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-
+-      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+-
+       register_pci_controller(&bcm63xx_pcie_controller);
+       return 0;
+@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6318()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
++      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
+       } else if (BCMCPU_IS_63268()) {
+@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
+       }
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM63268_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
new file mode 100644 (file)
index 0000000..298fffd
--- /dev/null
@@ -0,0 +1,74 @@
+From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 12:26:57 +0100
+Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
+ result
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
+ arch/mips/bcm63xx/prom.c                               |  4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 3 files changed, 13 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -22,6 +22,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
++static int flash_type;
++
+ static struct mtd_partition mtd_partitions[] = {
+       {
+               .name           = "cfe",
+@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++void __init bcm63xx_flash_detect(void)
++{
++      flash_type = bcm63xx_detect_flash_type();
++}
++
+ int __init bcm63xx_flash_register(void)
+ {
+-      int flash_type;
+       u32 val;
+-      flash_type = bcm63xx_detect_flash_type();
+-
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+               /* read base address of boot chip select (0) */
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -17,6 +17,7 @@
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_dev_flash.h>
+ void __init prom_init(void)
+ {
+@@ -52,6 +53,9 @@ void __init prom_init(void)
+       reg &= ~mask;
+       bcm_perf_writel(reg, PERF_CKCTL_REG);
++      /* detect and setup flash access */
++      bcm63xx_flash_detect();
++
+       /* do low level board init */
+       board_prom_init();
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -8,6 +8,8 @@ enum {
+       BCM63XX_FLASH_TYPE_NAND,
+ };
++void bcm63xx_flash_detect(void);
++
+ int __init bcm63xx_flash_register(void);
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644 (file)
index 0000000..329a156
--- /dev/null
@@ -0,0 +1,84 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 51 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -16,6 +16,7 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/mtd/spi-nor.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++#define HSSPI_FLASH_CTRL_REG          0x14
++#define FLASH_CTRL_READ_OPCODE_MASK   0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
++#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
++#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
++#define FLASH_CTRL_MB_EN              (1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+       flash_type = bcm63xx_detect_flash_type();
++
++      /* ensure flash mapping has sane values */
++      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++           BCMCPU_IS_63268())) {
++              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++              if (val & FLASH_CTRL_MB_EN) {
++                      /* cfe might configure non working dual-io mode */
++                      val &= ~FLASH_CTRL_MB_EN;
++                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
++                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
++
++                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++                      case FLASH_CTRL_ADDR_BYTES_3:
++                              val |= SPINOR_OP_READ_FAST;
++                              break;
++                      case FLASH_CTRL_ADDR_BYTES_4:
++                              val |= SPINOR_OP_READ_FAST_4B;
++                              break;
++                      case FLASH_CTRL_ADDR_BYTES_2:
++                      default:
++                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
++                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
++                              return;
++                      }
++              } else {
++                      /* ensure dummy bytes is set to 1 for _FAST reads */
++                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
++
++                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
++                              return;
++
++                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
++                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
++              }
++
++              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++      }
+ }
+ int __init bcm63xx_flash_register(void)
diff --git a/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
new file mode 100644 (file)
index 0000000..a8eea5b
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328()) {
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
++                              CKCTL_6318_ROBOSW025_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
+       } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
+@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
+  */
+ static void usbh_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
+-      else if (BCMCPU_IS_6348())
++      } else if (BCMCPU_IS_6348()) {
+               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+-      else if (BCMCPU_IS_6368())
++      } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+-      else
++      } else {
+               return;
++      }
+       if (enable)
+               msleep(100);
diff --git a/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch
new file mode 100644 (file)
index 0000000..92c37c1
--- /dev/null
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -682,6 +682,12 @@
+ #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
+ #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
++#define GPIO_PINMUX_SEL0_6318         0x1c
++#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
++#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
+ #define GPIO_PINMUX_OTHR_REG          0x24
+ #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
+@@ -1000,6 +1006,7 @@
+ #define USBH_PRIV_SWAP_6358_REG               0x0
+ #define USBH_PRIV_SWAP_6368_REG               0x1c
++#define USBH_PRIV_SWAP_6318_REG               0x0c
+ #define USBH_PRIV_SWAP_USBD_SHIFT     6
+ #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
+@@ -1025,6 +1032,13 @@
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
++#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
++#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
++
+ /*************************************************************************
+  * _REG relative to RSET_USBD
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
++
++#if IS_ENABLED(CONFIG_USB)
++      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
++              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
++              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
++              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
++              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
++      }
++#endif
+ }
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
+       bool "support 6318 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
diff --git a/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
new file mode 100644 (file)
index 0000000..cdff8d5
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -587,6 +587,9 @@
+ #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
+ #define TIMER_CTL_ENABLE_MASK         (1 << 31)
++/* Clock reset control (63268 only) */
++#define TIMER_CLK_RST_CTL_REG         0x2c
++#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
+ /*************************************************************************
+  * _REG relative to RSET_WDT
+@@ -1534,6 +1537,11 @@
+ #define STRAPBUS_63268_FCVO_SHIFT     21
+ #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++#define MISC_IDDQ_CTRL_6328_REG               0x48
++#define MISC_IDDQ_CTRL_63268_REG      0x4c
++
++#define IDDQ_CTRL_63268_USBH          (1 << 4)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
+       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
+ }
++static void bcm_misc_iddq_set(u32 mask, int enable)
++{
++      u32 offset;
++      u32 reg;
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++              offset = MISC_IDDQ_CTRL_6328_REG;
++      else if (BCMCPU_IS_63268())
++              offset = MISC_IDDQ_CTRL_63268_REG;
++      else
++              return;
++
++      reg = bcm_misc_readl(offset);
++      if (enable)
++              reg &= ~mask;
++      else
++              reg |= mask;
++      bcm_misc_writel(reg, offset);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
+       } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+       } else if (BCMCPU_IS_63268()) {
++              u32 reg;
++
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
++              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
++              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
++              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
++              if (enable)
++                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
++              else
++                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
++              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
+       } else {
+               return;
+       }
diff --git a/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
new file mode 100644 (file)
index 0000000..41f48b9
--- /dev/null
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1034,11 +1034,18 @@
+ #define USBH_PRIV_SETUP_6368_REG      0x28
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_IPP_SHIFT     5
++#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
+ #define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
+ #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
+-#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
+-#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++
++#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
++#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
++#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
++
+ #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
+ #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
+       bool "support 63268 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+-              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
+@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
new file mode 100644 (file)
index 0000000..35c2ef6
--- /dev/null
@@ -0,0 +1,108 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -40,6 +40,7 @@ struct board_info {
+       /* USB config */
+       struct bcm63xx_usbd_platform_data usbd;
++      unsigned int num_usbh_ports:2;
+       /* GPIO LEDs */
+       struct gpio_led leds[5];
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_EHCI_H_
+ #define BCM63XX_DEV_USB_EHCI_H_
+-int bcm63xx_ehci_register(void);
++int bcm63xx_ehci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_OHCI_H_
+ #define BCM63XX_DEV_USB_OHCI_H_
+-int bcm63xx_ohci_register(void);
++int bcm63xx_ohci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
+  */
+ int __init board_register_devices(void)
+ {
++      int usbh_ports = 0;
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -186,14 +188,21 @@ int __init board_register_devices(void)
+           !board_get_mac_address(board.enetsw.mac_addr))
+               bcm63xx_enetsw_register(&board.enetsw);
++      if ((board.has_ohci0 || board.has_ehci0)) {
++              usbh_ports = board.num_usbh_ports;
++
++              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
++                      usbh_ports = 1;
++      }
++
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
+       if (board.has_ehci0)
+-              bcm63xx_ehci_register();
++              bcm63xx_ehci_register(usbh_ports);
+       if (board.has_ohci0)
+-              bcm63xx_ohci_register();
++              bcm63xx_ohci_register(usbh_ports);
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
+       },
+ };
+-int __init bcm63xx_ehci_register(void)
++int __init bcm63xx_ehci_register(unsigned int num_ports)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
++      bcm63xx_ehci_pdata.num_ports = num_ports;       
++
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+       ehci_resources[0].end = ehci_resources[0].start;
+       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
+       .no_big_frame_no        = 1,
+-      .num_ports              = 1,
+       .power_on               = bcm63xx_ohci_power_on,
+       .power_off              = bcm63xx_ohci_power_off,
+       .power_suspend          = bcm63xx_ohci_power_off,
+@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
+       },
+ };
+-int __init bcm63xx_ohci_register(void)
++int __init bcm63xx_ohci_register(unsigned int num_ports)
+ {
+       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+               return -ENODEV;
++      bcm63xx_ohci_pdata.num_ports = num_ports;
++
+       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+       ohci_resources[0].end = ohci_resources[0].start;
+       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch
new file mode 100644 (file)
index 0000000..531adc9
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -576,6 +576,7 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
+       .leds = {
+               {
diff --git a/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
new file mode 100644 (file)
index 0000000..37d3ff7
--- /dev/null
@@ -0,0 +1,96 @@
+From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Jun 2014 12:47:49 +0200
+Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
+ board type
+
+Use the arguments passed to the kernel to detect being booted with
+CFE as the indicator for bcm963xx board support, allowing the
+non presence of CFE_EPTSEAL to assume a different board type.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
+ arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
+ 4 files changed, 23 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -1,12 +1,11 @@
+ # SPDX-License-Identifier: GPL-2.0
+-choice
+-      prompt "Board support"
++menu "Board support"
+       depends on BCM63XX
+-      default BOARD_BCM963XX
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
++      default y
+        help
+-endchoice
++endmenu
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -686,7 +686,7 @@ static const struct board_info __initcon
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+-void __init board_prom_init(void)
++void __init board_bcm963xx_init(void)
+ {
+       unsigned int i;
+       u8 *boot_addr, *cfe;
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -13,6 +13,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/fw/cfe/cfe_api.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_uart.h>
+@@ -30,6 +32,8 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include "board_common.h"
++
+ #define PFX   "board: "
+ static struct board_info board;
+@@ -80,6 +84,15 @@ const char *board_get_name(void)
+       return board.name;
+ }
++void __init board_prom_init(void)
++{
++      /* detect bootloader */
++      if (fw_arg3 == CFE_EPTSEAL)
++              board_bcm963xx_init();
++      else
++              panic("unsupported bootloader detected");
++}
++
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+ /*
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -6,4 +6,10 @@
+ void board_early_setup(const struct board_info *board,
+                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
++#if defined(CONFIG_BOARD_BCM963XX)
++void board_bcm963xx_init(void);
++#else
++static inline void board_bcm963xx_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
new file mode 100644 (file)
index 0000000..846f0b8
--- /dev/null
@@ -0,0 +1,61 @@
+From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:28:14 +0100
+Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
+ flash address
+
+Allow board implementations to force the physmap address.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 2 files changed, 16 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
+       },
+ };
++void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
++{
++      mtd_resources[0].start = start;
++      mtd_resources[0].end = end;
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+       u32 val;
+@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+-              /* read base address of boot chip select (0) */
+-              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-              val &= MPI_CSBASE_BASE_MASK;
+-              mtd_resources[0].start = val;
+-              mtd_resources[0].end = 0x1FFFFFFF;
++              if (!mtd_resources[0].start) {
++                      /* read base address of boot chip select (0) */
++                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++                      val &= MPI_CSBASE_BASE_MASK;
++
++                      mtd_resources[0].start = val;
++                      mtd_resources[0].end = 0x1FFFFFFF;
++              }
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -10,6 +10,8 @@ enum {
+ void bcm63xx_flash_detect(void);
++void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
++
+ int __init bcm63xx_flash_register(void);
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
new file mode 100644 (file)
index 0000000..886fb2d
--- /dev/null
@@ -0,0 +1,189 @@
+From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:31:12 +0200
+Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
+ unit
+
+In preparation for enhancing it, move it into its own file. Require a
+mac address to be passed as the argument to always "reserve" the mac
+regardless of the inclusion state of SSB.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |  2 +-
+ arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
+ arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
+ 4 files changed, 83 insertions(+), 48 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/sprom.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,8 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
++                 sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -39,44 +39,6 @@
+ static struct board_info board;
+ /*
+- * Register a sane SPROMv2 to make the on-board
+- * bcm4318 WLAN work
+- */
+-#ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
+-      .revision               = 0x02,
+-      .board_rev              = 0x17,
+-      .country_code           = 0x0,
+-      .ant_available_bg       = 0x3,
+-      .pa0b0                  = 0x15ae,
+-      .pa0b1                  = 0xfa85,
+-      .pa0b2                  = 0xfe8d,
+-      .pa1b0                  = 0xffff,
+-      .pa1b1                  = 0xffff,
+-      .pa1b2                  = 0xffff,
+-      .gpio0                  = 0xff,
+-      .gpio1                  = 0xff,
+-      .gpio2                  = 0xff,
+-      .gpio3                  = 0xff,
+-      .maxpwr_bg              = 0x004c,
+-      .itssi_bg               = 0x00,
+-      .boardflags_lo          = 0x2848,
+-      .boardflags_hi          = 0x0000,
+-};
+-
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+-{
+-      if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+-              return 0;
+-      } else {
+-              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+-              return -EINVAL;
+-      }
+-}
+-#endif
+-
+-/*
+  * return board name for /proc/cpuinfo
+  */
+ const char *board_get_name(void)
+@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++      u8 mac[ETH_ALEN];
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -220,15 +183,10 @@ int __init board_register_devices(void)
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+        */
+-#ifdef CONFIG_SSB_PCIHOST
+-      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+-              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              if (ssb_arch_register_fallback_sprom(
+-                              &bcm63xx_get_fallback_sprom) < 0)
+-                      pr_err(PFX "failed to register fallback SPROM\n");
+-      }
+-#endif
++
++      if (board_get_mac_address(mac) ||
++          bcm63xx_register_fallback_sprom(mac))
++              pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- /dev/null
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -0,0 +1,70 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/ssb/ssb.h>
++#include <bcm63xx_fallback_sprom.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "sprom: "
++
++/*
++ * Register a sane SPROMv2 to make the on-board
++ * bcm4318 WLAN work
++ */
++#ifdef CONFIG_SSB_PCIHOST
++static struct ssb_sprom bcm63xx_sprom = {
++      .revision               = 0x02,
++      .board_rev              = 0x17,
++      .country_code           = 0x0,
++      .ant_available_bg       = 0x3,
++      .pa0b0                  = 0x15ae,
++      .pa0b1                  = 0xfa85,
++      .pa0b2                  = 0xfe8d,
++      .pa1b0                  = 0xffff,
++      .pa1b1                  = 0xffff,
++      .pa1b2                  = 0xffff,
++      .gpio0                  = 0xff,
++      .gpio1                  = 0xff,
++      .gpio2                  = 0xff,
++      .gpio3                  = 0xff,
++      .maxpwr_bg              = 0x004c,
++      .itssi_bg               = 0x00,
++      .boardflags_lo          = 0x2848,
++      .boardflags_hi          = 0x0000,
++};
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->bustype == SSB_BUSTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
++
++int __init bcm63xx_register_fallback_sprom(u8 *mac)
++{
++      int ret = 0;
++
++#ifdef CONFIG_SSB_PCIHOST
++      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
++
++      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
++#endif
++      return ret;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -0,0 +1,6 @@
++#ifndef __BCM63XX_FALLBACK_SPROM
++#define __BCM63XX_FALLBACK_SPROM
++
++int bcm63xx_register_fallback_sprom(u8 *mac);
++
++#endif
diff --git a/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
new file mode 100644 (file)
index 0000000..d0e37ef
--- /dev/null
@@ -0,0 +1,95 @@
+From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:43:49 +0200
+Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
+
+Similar to ethernet setup, use a platform data struct for passing
+the mac. This eliminates the requirement to allocate an array on
+stack for the mac passed.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
+ arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
+ 4 files changed, 17 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
+-      u8 mac[ETH_ALEN];
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -184,8 +183,8 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+-      if (board_get_mac_address(mac) ||
+-          bcm63xx_register_fallback_sprom(mac))
++      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
++          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
+               pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
+ }
+ #endif
+-int __init bcm63xx_register_fallback_sprom(u8 *mac)
++int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
+ {
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
+-      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
+       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -1,6 +1,12 @@
+ #ifndef __BCM63XX_FALLBACK_SPROM
+ #define __BCM63XX_FALLBACK_SPROM
+-int bcm63xx_register_fallback_sprom(u8 *mac);
++#include <linux/if_ether.h>
++
++struct fallback_sprom_data {
++      u8 mac_addr[ETH_ALEN];
++};
++
++int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -7,6 +7,7 @@
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
++#include <bcm63xx_fallback_sprom.h>
+ /*
+  * flash mapping
+@@ -50,6 +51,9 @@ struct board_info {
+       /* External PHY reset GPIO flags from gpio.h */
+       unsigned long ephy_reset_gpio_flags;
++
++      /* fallback sprom config */
++      struct fallback_sprom_data fallback_sprom;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
new file mode 100644 (file)
index 0000000..f540eab
--- /dev/null
@@ -0,0 +1,140 @@
+From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:52:56 +0200
+Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
+
+Some devices do not provide enough mac addresses to populate wifi in
+addition to ethernet.
+
+Use having pci enabled as a rough heuristic which boards should have it
+enabled.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
+ arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
+ 3 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -70,6 +70,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .has_usbd                       = 0,
++      .use_fallback_sprom             = 1,
+       .usbd = {
+               .use_fullspeed          = 0,
+@@ -219,6 +220,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -264,6 +266,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -316,6 +319,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -370,6 +374,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -420,6 +425,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -443,6 +449,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -461,6 +468,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .has_ohci0                      = 1,
+       .has_enet0                      = 1,
+@@ -483,6 +491,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -509,6 +518,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -561,6 +571,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -632,6 +643,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -183,8 +183,9 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+-      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
+-          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
++      if (board.use_fallback_sprom &&
++          (board_get_mac_address(board.fallback_sprom.mac_addr) ||
++           bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
+               pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -33,6 +33,7 @@ struct board_info {
+       unsigned int    has_usbd:1;
+       unsigned int    has_uart0:1;
+       unsigned int    has_uart1:1;
++      unsigned int    use_fallback_sprom:1;
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
new file mode 100644 (file)
index 0000000..0c4a9be
--- /dev/null
@@ -0,0 +1,66 @@
+From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:58:38 +0200
+Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
+
+Different chips require different sprom contents, so prepare for
+supplying the appropriate sprom type.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
+ 2 files changed, 17 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -22,7 +22,7 @@
+  * bcm4318 WLAN work
+  */
+ #ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
++static __initconst struct ssb_sprom bcm63xx_default_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+       .country_code           = 0x0,
+@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
+       .boardflags_hi          = 0x0000,
+ };
++static struct ssb_sprom bcm63xx_sprom;
++
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
++      switch (data->type) {
++      case SPROM_DEFAULT:
++              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
++                     sizeof(bcm63xx_sprom));
++              break;
++      default:
++              return -EINVAL;
++      }
++
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -3,8 +3,13 @@
+ #include <linux/if_ether.h>
++enum sprom_type {
++      SPROM_DEFAULT, /* default fallback sprom */
++};
++
+ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
++      enum sprom_type type;
+ };
+ int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
new file mode 100644 (file)
index 0000000..42502eb
--- /dev/null
@@ -0,0 +1,517 @@
+From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:16:36 +0200
+Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
+
+Allow using raw sprom content as templates.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 482 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
+               return -EINVAL;
+       }
+ }
++
++/* FIXME: use lib_sprom after submission upstream */
++
++/* Get the word-offset for a SSB_SPROM_XXX define. */
++#define SPOFF(offset) ((offset) / sizeof(u16))
++/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
++#define SPEX16(_outvar, _offset, _mask, _shift)       \
++      out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift)       \
++      out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++                         in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++      SPEX16(_outvar, _offset, _mask, _shift)
++
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift)   \
++      do {    \
++              SPEX(_field[0], _offset +  0, _mask, _shift);   \
++              SPEX(_field[1], _offset +  2, _mask, _shift);   \
++              SPEX(_field[2], _offset +  4, _mask, _shift);   \
++              SPEX(_field[3], _offset +  6, _mask, _shift);   \
++              SPEX(_field[4], _offset +  8, _mask, _shift);   \
++              SPEX(_field[5], _offset + 10, _mask, _shift);   \
++              SPEX(_field[6], _offset + 12, _mask, _shift);   \
++              SPEX(_field[7], _offset + 14, _mask, _shift);   \
++      } while (0)
++
++
++static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
++                             u16 mask, u16 shift)
++{
++      u16 v;
++      u8 gain;
++
++      v = in[SPOFF(SSB_SPROM1_AGAIN)];
++      gain = (v & mask) >> shift;
++      if (gain == 0xFF)
++              gain = 2; /* If unset use 2dBm */
++      if (sprom_revision == 1) {
++              /* Convert to Q5.2 */
++              gain <<= 2;
++      } else {
++              /* Q5.2 Fractional part is stored in 0xC0 */
++              gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
++      }
++
++      return (s8)gain;
++}
++
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++      SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++      SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++      SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++      SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++      SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++      SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++      SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++      SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++      SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++      SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++           SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
++static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
++{
++      u16 loc[3];
++
++      if (out->revision == 3)                 /* rev 3 moved MAC */
++              loc[0] = SSB_SPROM3_IL0MAC;
++      else {
++              loc[0] = SSB_SPROM1_IL0MAC;
++              loc[1] = SSB_SPROM1_ET0MAC;
++              loc[2] = SSB_SPROM1_ET1MAC;
++      }
++
++      SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
++      SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
++           SSB_SPROM1_ETHPHY_ET1A_SHIFT);
++      SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
++      SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
++      SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      if (out->revision == 1)
++              SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
++                   SSB_SPROM1_BINF_CCODE_SHIFT);
++      SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
++           SSB_SPROM1_BINF_ANTA_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
++           SSB_SPROM1_BINF_ANTBG_SHIFT);
++      SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
++      SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
++      SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
++      SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
++      SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
++      SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
++      SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
++      SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
++           SSB_SPROM1_GPIOA_P1_SHIFT);
++      SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
++      SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
++           SSB_SPROM1_GPIOB_P3_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
++           SSB_SPROM1_MAXPWR_A_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
++      SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
++           SSB_SPROM1_ITSSI_A_SHIFT);
++      SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
++      SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
++
++      SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
++      SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
++
++      /* Extract the antenna gain values. */
++      out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++                                                  SSB_SPROM1_AGAIN_BG,
++                                                  SSB_SPROM1_AGAIN_BG_SHIFT);
++      out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++                                                  SSB_SPROM1_AGAIN_A,
++                                                  SSB_SPROM1_AGAIN_A_SHIFT);
++      if (out->revision >= 2)
++              sprom_extract_r23(out, in);
++}
++
++/* Revs 4 5 and 8 have partially shared layout */
++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
++{
++      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
++      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
++      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
++      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
++
++      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
++      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
++      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
++      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
++
++      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
++      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
++      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
++      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
++
++      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
++      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
++      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
++      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
++}
++
++static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
++{
++      u16 il0mac_offset;
++
++      if (out->revision == 4)
++              il0mac_offset = SSB_SPROM4_IL0MAC;
++      else
++              il0mac_offset = SSB_SPROM5_IL0MAC;
++
++      SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
++      SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
++           SSB_SPROM4_ETHPHY_ET1A_SHIFT);
++      SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      if (out->revision == 4) {
++              SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
++              SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
++              SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
++              SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
++      } else {
++              SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
++              SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
++              SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
++              SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
++      }
++      SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
++           SSB_SPROM4_ANTAVAIL_A_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
++           SSB_SPROM4_ANTAVAIL_BG_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
++      SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
++           SSB_SPROM4_ITSSI_BG_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
++      SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
++           SSB_SPROM4_ITSSI_A_SHIFT);
++      if (out->revision == 4) {
++              SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
++              SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
++                   SSB_SPROM4_GPIOA_P1_SHIFT);
++              SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
++              SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
++                   SSB_SPROM4_GPIOB_P3_SHIFT);
++      } else {
++              SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
++              SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
++                   SSB_SPROM5_GPIOA_P1_SHIFT);
++              SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
++              SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
++                   SSB_SPROM5_GPIOB_P3_SHIFT);
++      }
++
++      /* Extract the antenna gain values. */
++      SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
++           SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
++      SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
++           SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
++      SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
++           SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
++      SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
++           SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
++
++      sprom_extract_r458(out, in);
++
++      /* TODO - get remaining rev 4 stuff needed */
++}
++
++static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
++{
++      int i;
++      u16 o;
++      u16 pwr_info_offset[] = {
++              SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++              SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++      };
++      BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++                      ARRAY_SIZE(out->core_pwr_info));
++
++      SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++      SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
++      SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
++      SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++      SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++      SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
++      SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
++           SSB_SPROM8_ANTAVAIL_A_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
++           SSB_SPROM8_ANTAVAIL_BG_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
++      SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
++           SSB_SPROM8_ITSSI_BG_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
++      SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
++           SSB_SPROM8_ITSSI_A_SHIFT);
++      SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++      SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++           SSB_SPROM8_MAXP_AL_SHIFT);
++      SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
++      SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
++           SSB_SPROM8_GPIOA_P1_SHIFT);
++      SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
++      SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
++           SSB_SPROM8_GPIOB_P3_SHIFT);
++      SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++      SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++           SSB_SPROM8_TRI5G_SHIFT);
++      SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++      SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++           SSB_SPROM8_TRI5GH_SHIFT);
++      SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++      SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++           SSB_SPROM8_RXPO5G_SHIFT);
++      SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++      SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++           SSB_SPROM8_RSSISMC2G_SHIFT);
++      SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++           SSB_SPROM8_RSSISAV2G_SHIFT);
++      SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++           SSB_SPROM8_BXA2G_SHIFT);
++      SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++      SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++           SSB_SPROM8_RSSISMC5G_SHIFT);
++      SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++           SSB_SPROM8_RSSISAV5G_SHIFT);
++      SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++           SSB_SPROM8_BXA5G_SHIFT);
++      SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++      SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++      SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++      SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++      SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++      SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++      SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++      SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++      SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++      SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++      SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++      SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++      SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++      SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
++
++      /* Extract the antenna gain values. */
++      SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
++           SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
++      SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
++           SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
++      SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
++           SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
++      SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
++           SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
++
++      /* Extract cores power info info */
++      for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++              o = pwr_info_offset[i];
++              SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++                      SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++              SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++                      SSB_SPROM8_2G_MAXP, 0);
++
++              SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++              SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++                      SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++              SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++                      SSB_SPROM8_5G_MAXP, 0);
++              SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++                      SSB_SPROM8_5GH_MAXP, 0);
++              SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++                      SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++              SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++      }
++
++      /* Extract FEM info */
++      SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++      SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++      SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++      SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++      SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++      SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++      SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++      SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++      SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++      SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++      SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++           SSB_SPROM8_LEDDC_ON_SHIFT);
++      SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++           SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++      SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++           SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++      SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++           SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++      SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++           SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++      SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++      SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++      SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++           SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++      SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++           SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++      SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++      SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++           SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++      SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++           SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++           SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++      SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++      SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++      SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++           SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++      SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++      SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++      SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++      SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++      SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++           SSB_SPROM8_THERMAL_TRESH_SHIFT);
++      SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++           SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++      SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++           SSB_SPROM8_TEMPDELTA_PHYCAL,
++           SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++      SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++           SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++      SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++           SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++           SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
++      sprom_extract_r458(out, in);
++
++      /* TODO - get remaining rev 8 stuff needed */
++}
++
++static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
++{
++      memset(out, 0, sizeof(*out));
++
++      out->revision = in[size - 1] & 0x00FF;
++      memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
++      memset(out->et1mac, 0xFF, 6);
++
++      switch (out->revision) {
++      case 1:
++      case 2:
++      case 3:
++              sprom_extract_r123(out, in);
++              break;
++      case 4:
++      case 5:
++              sprom_extract_r45(out, in);
++              break;
++      case 8:
++              sprom_extract_r8(out, in);
++              break;
++      default:
++              pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++                       out->revision);
++              out->revision = 1;
++              sprom_extract_r123(out, in);
++      }
++
++      if (out->boardflags_lo == 0xFFFF)
++              out->boardflags_lo = 0;  /* per specs */
++      if (out->boardflags_hi == 0xFFFF)
++              out->boardflags_hi = 0;  /* per specs */
++
++      return 0;
++}
++
++static __initdata u16 template_sprom[220];
+ #endif
++
+ int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
+ {
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
++      u16 size = 0;
++
+       switch (data->type) {
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
+               return -EINVAL;
+       }
++      if (size > 0)
++              sprom_extract(&bcm63xx_sprom, template_sprom, size);
++
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
new file mode 100644 (file)
index 0000000..65c00b5
--- /dev/null
@@ -0,0 +1,181 @@
+From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:33:38 +0200
+Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
+ ssb cards
+
+Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
+ 2 files changed, 142 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
+       .boardflags_hi          = 0x0000,
+ };
++
++static __initconst u16 bcm4306_sprom[] = {
++      0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
++      0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
++      0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
++};
++
++static __initconst u16 bcm4318_sprom[] = {
++      0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
++      0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
++      0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
++};
++
++static __initconst u16 bcm4321_sprom[] = {
++      0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
++      0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0004,
++};
++
++static __initconst u16 bcm4322_sprom[] = {
++      0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
++      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43222_sprom[] = {
++      0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
++      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
+ static struct ssb_sprom bcm63xx_sprom;
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
+       u16 size = 0;
+       switch (data->type) {
++      case SPROM_BCM4306:
++              memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
++              size = ARRAY_SIZE(bcm4306_sprom);
++              break;
++      case SPROM_BCM4318:
++              memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
++              size = ARRAY_SIZE(bcm4318_sprom);
++              break;
++      case SPROM_BCM4321:
++              memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
++              size = ARRAY_SIZE(bcm4321_sprom);
++              break;
++      case SPROM_BCM4322:
++              memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
++              size = ARRAY_SIZE(bcm4322_sprom);
++              break;
++      case SPROM_BCM43222:
++              memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
++              size = ARRAY_SIZE(bcm43222_sprom);
++              break;
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -5,6 +5,12 @@
+ enum sprom_type {
+       SPROM_DEFAULT, /* default fallback sprom */
++      /* SSB based */
++      SPROM_BCM4306,
++      SPROM_BCM4318,
++      SPROM_BCM4321,
++      SPROM_BCM4322,
++      SPROM_BCM43222,
+ };
+ struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
new file mode 100644 (file)
index 0000000..416aa9d
--- /dev/null
@@ -0,0 +1,128 @@
+From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:48:26 +0200
+Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
+
+Similar to SSB, register a fallback sprom handler for BCMA.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig |  1 +
+ arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
+ 2 files changed, 36 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -5,6 +5,7 @@ menu "Board support"
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
++      select BCMA
+       default y
+        help
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -12,6 +12,7 @@
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
+ #include <bcm63xx_fallback_sprom.h>
+ #include <board_bcm963xx.h>
+@@ -21,7 +22,7 @@
+  * Register a sane SPROMv2 to make the on-board
+  * bcm4318 WLAN work
+  */
+-#ifdef CONFIG_SSB_PCIHOST
++#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
+ static __initconst struct ssb_sprom bcm63xx_default_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
+       .boardflags_hi          = 0x0000,
+ };
+-
++#if defined (CONFIG_SSB_PCIHOST)
+ static __initconst u16 bcm4306_sprom[] = {
+       0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
+       0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
+@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
+       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+       0xffff, 0xffff, 0xffff, 0x0008,
+ };
++#endif /* CONFIG_SSB_PCIHOST */
+ static struct ssb_sprom bcm63xx_sprom;
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++#if defined(CONFIG_SSB_PCIHOST)
++int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
+               return -EINVAL;
+       }
+ }
++#endif
++
++#if defined(CONFIG_BCMA_HOST_PCI)
++int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
+ /* FIXME: use lib_sprom after submission upstream */
+@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
+ {
+       int ret = 0;
+-#ifdef CONFIG_SSB_PCIHOST
++#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
+       u16 size = 0;
+       switch (data->type) {
++#if defined(CONFIG_SSB_PCIHOST)
+       case SPROM_BCM4306:
+               memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
+               size = ARRAY_SIZE(bcm4306_sprom);
+@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
+               memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
+               size = ARRAY_SIZE(bcm43222_sprom);
+               break;
++#endif
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
++#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
++
++#if defined(CONFIG_SSB_PCIHOST)
++      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
++      if (ret)
++              return ret;
++
++#endif
+-      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
++#if defined(CONFIG_BCMA_HOST_PCI)
++      ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
++      if (ret)
++              return ret;
+ #endif
+       return ret;
+ }
diff --git a/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
new file mode 100644 (file)
index 0000000..5c0abb9
--- /dev/null
@@ -0,0 +1,303 @@
+From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 30 Jul 2014 23:14:27 +0200
+Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
+
+Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
+BCM43228, and BCM4331.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
+ 2 files changed, 264 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
+ };
+ #endif /* CONFIG_SSB_PCIHOST */
++#if defined(CONFIG_BCMA_HOST_PCI)
++static __initconst u16 bcm4313_sprom[] = {
++      0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
++      0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
++      0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0008,
++};
++
++static __initconst u16 bcm43131_sprom[] = {
++      0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
++      0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43217_sprom[] = {
++      0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x7a08,
++};
++
++static __initconst u16 bcm43225_sprom[] = {
++      0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
++      0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43227_sprom[] = {
++      0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43228_sprom[] = {
++      0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
++      0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
++      0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
++      0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
++      0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
++      0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xf008,
++};
++
++static __initconst u16 bcm4331_sprom[] = {
++      0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
++      0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
++      0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
++      0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
++      0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
++      0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
++      0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0009,
++};
++
++#endif  /* CONFIG_BCMA_HOST_PCI */
++
+ static struct ssb_sprom bcm63xx_sprom;
+ #if defined(CONFIG_SSB_PCIHOST)
+@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
+               size = ARRAY_SIZE(bcm43222_sprom);
+               break;
+ #endif
++#if defined(CONFIG_BCMA_HOST_PCI)
++      case SPROM_BCM4313:
++              memcpy(&template_sprom, &bcm4313_sprom,
++                       sizeof(bcm4313_sprom));
++              size = ARRAY_SIZE(bcm4313_sprom);
++              break;
++      case SPROM_BCM43131:
++              memcpy(&template_sprom, &bcm43131_sprom,
++                     sizeof(bcm43131_sprom));
++              size = ARRAY_SIZE(bcm43131_sprom);
++              break;
++      case SPROM_BCM43217:
++              memcpy(&template_sprom, &bcm43217_sprom,
++                     sizeof(bcm43217_sprom));
++              size = ARRAY_SIZE(bcm43217_sprom);
++              break;
++      case SPROM_BCM43225:
++              memcpy(&template_sprom, &bcm43225_sprom,
++                     sizeof(bcm43225_sprom));
++              size = ARRAY_SIZE(bcm43225_sprom);
++              break;
++      case SPROM_BCM43227:
++              memcpy(&template_sprom, &bcm43227_sprom,
++                     sizeof(bcm43227_sprom));
++              size = ARRAY_SIZE(bcm43227_sprom);
++              break;
++      case SPROM_BCM43228:
++              memcpy(&template_sprom, &bcm43228_sprom,
++                     sizeof(bcm43228_sprom));
++              size = ARRAY_SIZE(bcm43228_sprom);
++              break;
++      case SPROM_BCM4331:
++              memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
++              size = ARRAY_SIZE(bcm4331_sprom);
++              break;
++#endif
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -11,6 +11,14 @@ enum sprom_type {
+       SPROM_BCM4321,
+       SPROM_BCM4322,
+       SPROM_BCM43222,
++      /* BCMA based */
++      SPROM_BCM4313,
++      SPROM_BCM43131,
++      SPROM_BCM43217,
++      SPROM_BCM43225,
++      SPROM_BCM43227,
++      SPROM_BCM43228,
++      SPROM_BCM4331,
+ };
+ struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
new file mode 100644 (file)
index 0000000..74c2846
--- /dev/null
@@ -0,0 +1,67 @@
+From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 31 Jul 2014 19:12:33 +0200
+Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
+ fixups
+
+Allow board_info files to supply fixups for the base sproms to adapt
+them to the actual used sprom contents in case they do not use the
+default ones.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
+ 2 files changed, 21 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
+       return 0;
+ }
++void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
++{
++      unsigned int i;
++
++      for (i = 0; i < n; i++)
++              sprom[fixups[i].offset] = fixups[i].value;
++}
++
+ static __initdata u16 template_sprom[220];
+ #endif
+@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
+               return -EINVAL;
+       }
+-      if (size > 0)
++      if (size > 0) {
++              sprom_apply_fixups(template_sprom, data->board_fixups,
++                                 data->num_board_fixups);
++
+               sprom_extract(&bcm63xx_sprom, template_sprom, size);
++      }
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -21,9 +21,17 @@ enum sprom_type {
+       SPROM_BCM4331,
+ };
++struct sprom_fixup {
++      u16 offset;
++      u16 value;
++};
++
+ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
+       enum sprom_type type;
++
++      struct sprom_fixup *board_fixups;
++      unsigned int num_board_fixups;
+ };
+ int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
new file mode 100644 (file)
index 0000000..40591e5
--- /dev/null
@@ -0,0 +1,102 @@
+From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 31 Jul 2014 20:39:44 +0200
+Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
+ fallback sprom
+
+Warn if the set pci bus/slot does not match the actual request.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
+ 2 files changed, 29 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
+ #endif  /* CONFIG_BCMA_HOST_PCI */
+-static struct ssb_sprom bcm63xx_sprom;
++struct fallback_sprom_match {
++      u8 pci_bus;
++      u8 pci_dev;
++      struct ssb_sprom sprom;
++};
++
++static struct fallback_sprom_match fallback_sprom;
+ #if defined(CONFIG_SSB_PCIHOST)
+ int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
++                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
++                      pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                              bus->host_pci->bus->number,
++                              PCI_SLOT(bus->host_pci->devfn));
++              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
+               return 0;
+       } else {
+               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
+ int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
++                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
++                      pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                              bus->host_pci->bus->number,
++                              PCI_SLOT(bus->host_pci->devfn));
++              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
+               return 0;
+       } else {
+               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
+               break;
+ #endif
+       case SPROM_DEFAULT:
+-              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+-                     sizeof(bcm63xx_sprom));
++              memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
++                     sizeof(bcm63xx_default_sprom));
+               break;
+       default:
+               return -EINVAL;
+@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
+               sprom_apply_fixups(template_sprom, data->board_fixups,
+                                  data->num_board_fixups);
+-              sprom_extract(&bcm63xx_sprom, template_sprom, size);
++              sprom_extract(&fallback_sprom.sprom, template_sprom, size);
+       }
+-      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
++
++      fallback_sprom.pci_bus = data->pci_bus;
++      fallback_sprom.pci_dev = data->pci_dev;
+ #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
+ #if defined(CONFIG_SSB_PCIHOST)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -30,6 +30,9 @@ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
+       enum sprom_type type;
++      u8 pci_bus;
++      u8 pci_dev;
++
+       struct sprom_fixup *board_fixups;
+       unsigned int num_board_fixups;
+ };
diff --git a/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
new file mode 100644 (file)
index 0000000..a491816
--- /dev/null
@@ -0,0 +1,118 @@
+From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 24 Jun 2014 10:57:51 +0200
+Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
+ arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/prom.c                |    6 ++++++
+ 3 files changed, 44 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -2,6 +2,10 @@
+ menu "Board support"
+       depends on BCM63XX
++config BOARD_BCM63XX_DT
++      bool "Device Tree boards (experimential)"
++      select USE_OF
++
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -10,11 +10,14 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
++#include <linux/of_fdt.h>
++#include <linux/of_platform.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+ #include <asm/fw/cfe/cfe_api.h>
++#include <asm/prom.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_uart.h>
+@@ -125,8 +128,23 @@ void __init board_setup(void)
+       /* make sure we're running on expected cpu */
+       if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+               panic("unexpected CPU for bcm963xx board");
++
++#if CONFIG_OF
++      if (initial_boot_params)
++              __dt_setup_arch(initial_boot_params);
++#endif
+ }
++#if CONFIG_OF
++void __init device_tree_init(void)
++{
++      if (!initial_boot_params)
++              return;
++
++      unflatten_and_copy_device_tree();
++}
++#endif
++
+ static struct gpio_led_platform_data bcm63xx_led_data;
+ static struct platform_device bcm63xx_gpio_leds = {
+@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
+       .dev.platform_data      = &bcm63xx_led_data,
+ };
++#if CONFIG_OF
++static struct of_device_id of_ids[] = {
++      { /* filled at runtime */ },
++      { .compatible = "simple-bus" },
++      { },
++};
++#endif
+ /*
+  * third stage init callback, register all board devices.
+  */
+@@ -142,6 +167,15 @@ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++#if CONFIG_OF
++      if (of_have_populated_dt()) {
++              snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
++                       "brcm,bcm%x", bcm63xx_get_cpu_id());
++
++              of_platform_populate(NULL, of_ids, NULL, NULL);
++      }
++#endif
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -8,6 +8,7 @@
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
++#include <linux/of_fdt.h>
+ #include <linux/smp.h>
+ #include <asm/bootinfo.h>
+ #include <asm/bmips.h>
+@@ -23,6 +24,11 @@ void __init prom_init(void)
+ {
+       u32 reg, mask;
++#if CONFIG_OF
++      if (fw_passed_dtb)
++              early_init_dt_verify((void *)fw_passed_dtb);
++#endif
++
+       bcm63xx_cpu_init();
+       /* stop any running watchdog */
diff --git a/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
new file mode 100644 (file)
index 0000000..7069c23
--- /dev/null
@@ -0,0 +1,95 @@
+From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 26 Jun 2014 12:51:00 +0200
+Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
+ by dtb
+
+Allow using the passed dtb's compatible property to match board_info
+structs instead of nvram's boardname field, which is not unique anyway.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |    3 +++
+ 3 files changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -695,6 +695,10 @@ static const struct board_info __initcon
+ #endif
+ };
++static struct of_device_id const bcm963xx_boards_dt[] = {
++      { },
++};
++
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void)
+       char *board_name = NULL;
+       u32 val;
+       struct bcm_hcs *hcs;
++      const struct of_device_id *board_match;
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void)
+       } else {
+               board_name = bcm63xx_nvram_get_name();
+       }
++
++      /* find board by compat */
++      board_match = bcm63xx_match_board(bcm963xx_boards_dt);
++      if (board_match) {
++              board_early_setup(board_match->data,
++                                bcm63xx_nvram_get_mac_address);
++
++              return;
++      }
++
+       /* find board by name */
+       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -239,3 +239,21 @@ int __init board_register_devices(void)
+       return 0;
+ }
++
++const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
++{
++      const struct of_device_id *match;
++      unsigned long dt_root;
++
++      if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
++              return NULL;
++
++      dt_root = of_get_flat_dt_root();
++
++      for (match = m; match->compatible[0]; match++) {
++              if (of_flat_dt_is_compatible(dt_root, match->compatible))
++                      return match;
++      }
++
++      return NULL;
++}
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -1,11 +1,14 @@
+ #ifndef __BOARD_COMMON_H
+ #define __BOARD_COMMON_H
++#include <linux/of.h>
+ #include <board_bcm963xx.h>
+ void board_early_setup(const struct board_info *board,
+                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
++const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
++
+ #if defined(CONFIG_BOARD_BCM963XX)
+ void board_bcm963xx_init(void);
+ #else
diff --git a/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
new file mode 100644 (file)
index 0000000..5dd4cba
--- /dev/null
@@ -0,0 +1,65 @@
+From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 21 Nov 2014 16:54:06 +0100
+Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
+ list
+
+Populate the compatible to board_info list to allow dtbs to be used
+for known boards.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -696,6 +696,48 @@ static const struct board_info __initcon
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
++#ifdef CONFIG_OF
++#ifdef CONFIG_BCM63XX_CPU_3368
++      { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6338
++      { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
++      { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6345
++      { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6348
++      { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
++      { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
++      { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
++      { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
++      { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
++      { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
++      { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
++      { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
++      { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6358
++      { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
++      { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
++      { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
++      { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
++      { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
++      { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6368
++#endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++#endif
++#endif /* CONFIG_OF */
+       { },
+ };
diff --git a/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch b/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch
new file mode 100644 (file)
index 0000000..026eff3
--- /dev/null
@@ -0,0 +1,37 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -143,6 +143,18 @@ void __init device_tree_init(void)
+       unflatten_and_copy_device_tree();
+ }
++
++int board_of_device_present(const char *alias)
++{
++      bool present;
++      struct device_node *np;
++
++      np = of_find_node_by_path(alias);
++      present = of_device_is_available(np);
++      of_node_put(np);
++
++      return present;
++}
+ #endif
+ static struct gpio_led_platform_data bcm63xx_led_data;
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
+ static inline void board_bcm963xx_init(void) { }
+ #endif
++#if defined(CONFIG_OF)
++int board_of_device_present(const char *alias);
++#else
++static inline void board_of_device_present(const char *alias)
++{
++      return 0;
++}
++#endif
++
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch
new file mode 100644 (file)
index 0000000..25384eb
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -23,6 +23,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
++#include "boards/board_common.h"
++
+ static int flash_type;
+ static struct mtd_partition mtd_partitions[] = {
+@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void)
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
++              /* don't register when already registered through from dtb */
++              if (board_of_device_present("pflash"))
++                      return 0;
+               if (!mtd_resources[0].start) {
+                       /* read base address of boot chip select (0) */
diff --git a/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
new file mode 100644 (file)
index 0000000..c5041a9
--- /dev/null
@@ -0,0 +1,45 @@
+From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Dec 2014 00:20:07 +0100
+Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c |   12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -14,6 +14,8 @@
+ #include <linux/irqchip.h>
+ #include <linux/irqchip/irq-bcm6345-ext.h>
+ #include <linux/irqchip/irq-bcm6345-periph.h>
++#include <linux/of.h>
++#include <linux/of_fdt.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -21,6 +23,9 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
++IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
++           mips_cpu_irq_of_init);
++
+ void __init arch_init_irq(void)
+ {
+       void __iomem *periph_bases[2];
+@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
+       int periph_irqs[2] = { 2, 3 };
+       int ext_irqs[6];
++#ifdef CONFIG_OF
++      if (initial_boot_params) {
++              irqchip_init();
++              return;
++      }
++#endif
++
+       periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
new file mode 100644 (file)
index 0000000..e0fa439
--- /dev/null
@@ -0,0 +1,178 @@
+From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 19:55:32 +0100
+Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/Kconfig        |    8 +++
+ drivers/gpio/Makefile       |    1 +
+ drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 131 insertions(+)
+ create mode 100644 drivers/gpio/gpio-bcm63xx.c
+
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -134,6 +134,13 @@ config GPIO_BCM_KONA
+       help
+         Turn on GPIO support for Broadcom "Kona" chips.
++config GPIO_BCM63XX
++      bool "Broadcom BCM63XX GPIO"
++      depends on MIPS || COMPILE_TEST
++      select GPIO_GENERIC
++      help
++        Turn on GPIO support for Broadcom BCM63XX xDSL chips.
++
+ config GPIO_BRCMSTB
+       tristate "BRCMSTB GPIO support"
+       default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79)     += gpio-ath79.o
+ obj-$(CONFIG_GPIO_ASPEED)     += gpio-aspeed.o
+ obj-$(CONFIG_GPIO_AXP209)     += gpio-axp209.o
+ obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
++obj-$(CONFIG_GPIO_BCM63XX)    += gpio-bcm63xx.o
+ obj-$(CONFIG_GPIO_BD9571MWV)  += gpio-bd9571mwv.o
+ obj-$(CONFIG_GPIO_BRCMSTB)    += gpio-brcmstb.o
+ obj-$(CONFIG_GPIO_BT8XX)      += gpio-bt8xx.o
+--- /dev/null
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -0,0 +1,135 @@
++/*
++ * Driver for BCM63XX memory-mapped GPIO controllers, based on
++ * Generic driver for memory-mapped GPIO controllers.
++ *
++ * Copyright 2008 MontaVista Software, Inc.
++ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
++ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/compiler.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/log2.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_gpio.h>
++
++static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++      char irq_name[7]; /* "gpioXX" */
++
++      sprintf(irq_name, "gpio%d", gpio);
++      return of_irq_get_byname(chip->of_node, irq_name);
++}
++
++static int bcm63xx_gpio_probe(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct resource *dat_r, *dirout_r;
++      void __iomem *dat;
++      void __iomem *dirout;
++      unsigned long sz;
++      int err;
++      struct gpio_chip *gc;
++      struct bgpio_pdata *pdata = dev_get_platdata(dev);
++
++      dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++      if (!dat_r || !dirout_r)
++              return -EINVAL;
++
++      if (resource_size(dat_r) != resource_size(dirout_r))
++              return -EINVAL;
++
++      sz = resource_size(dat_r);
++
++      dat = devm_ioremap_resource(dev, dat_r);
++      if (IS_ERR(dat))
++              return PTR_ERR(dat);
++
++      dirout = devm_ioremap_resource(dev, dirout_r);
++      if (IS_ERR(dirout))
++              return PTR_ERR(dirout);
++
++      gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
++      if (!gc)
++              return -ENOMEM;
++
++      err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
++                       BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++      if (err)
++              return err;
++
++      platform_set_drvdata(pdev, gc);
++
++      if (dev->of_node) {
++              int id = of_alias_get_id(dev->of_node, "gpio");
++              u32 ngpios;
++
++              if (id >= 0)
++                      gc->label = devm_kasprintf(dev, GFP_KERNEL,
++                                                 "bcm63xx-gpio.%d", id);
++
++              if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
++                      gc->ngpio = ngpios;
++
++              if (of_get_property(dev->of_node, "interrupt-names", NULL))
++                      gc->to_irq = bcm63xx_gpio_to_irq;
++
++      } else if (pdata) {
++              gc->base = pdata->base;
++              if (pdata->ngpio > 0)
++                      gc->ngpio = pdata->ngpio;
++      }
++
++      return gpiochip_add(gc);
++}
++
++static int bcm63xx_gpio_remove(struct platform_device *pdev)
++{
++      struct gpio_chip *gc = platform_get_drvdata(pdev);
++
++      gpiochip_remove(gc);
++      return 0;
++}
++
++#ifdef CONFIG_OF
++static struct of_device_id bcm63xx_gpio_of_match[] = {
++      { .compatible = "brcm,bcm6345-gpio" },
++      { },
++};
++#endif
++
++static struct platform_driver bcm63xx_gpio_driver = {
++      .probe = bcm63xx_gpio_probe,
++      .remove = bcm63xx_gpio_remove,
++      .driver = {
++              .name = "bcm63xx-gpio",
++              .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
++      },
++};
++
++module_platform_driver(bcm63xx_gpio_driver);
++
++MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
++MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
new file mode 100644 (file)
index 0000000..fe56da0
--- /dev/null
@@ -0,0 +1,215 @@
+From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 23:58:54 +0100
+Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c |    2 +
+ arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
+ arch/mips/bcm63xx/setup.c |   3 -
+ 3 files changed, 32 insertions(+), 118 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -188,6 +188,8 @@ int __init board_register_devices(void)
+       }
+ #endif
++      bcm63xx_gpio_init();
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -5,147 +5,62 @@
+  *
+  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+  */
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+-#include <linux/spinlock.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio/driver.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+-#include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+-static u32 gpio_out_low_reg;
+-
+-static void bcm63xx_gpio_out_low_reg_init(void)
++static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+-      switch (bcm63xx_get_cpu_id()) {
+-      case BCM6345_CPU_ID:
+-              gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
+-              break;
+-      default:
+-              gpio_out_low_reg = GPIO_DATA_LO_REG;
+-              break;
+-      }
+-}
+-
+-static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+-static u32 gpio_out_low, gpio_out_high;
++      struct resource res[2];
++      struct bgpio_pdata pdata;
+-static void bcm63xx_gpio_set(struct gpio_chip *chip,
+-                           unsigned gpio, int val)
+-{
+-      u32 reg;
+-      u32 mask;
+-      u32 *v;
+-      unsigned long flags;
+-
+-      if (gpio >= chip->ngpio)
+-              BUG();
+-
+-      if (gpio < 32) {
+-              reg = gpio_out_low_reg;
+-              mask = 1 << gpio;
+-              v = &gpio_out_low;
+-      } else {
+-              reg = GPIO_DATA_HI_REG;
+-              mask = 1 << (gpio - 32);
+-              v = &gpio_out_high;
+-      }
+-
+-      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+-      if (val)
+-              *v |= mask;
+-      else
+-              *v &= ~mask;
+-      bcm_gpio_writel(*v, reg);
+-      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+-}
++      memset(res, 0, sizeof(res));
++      memset(&pdata, 0, sizeof(pdata));
+-static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+-{
+-      u32 reg;
+-      u32 mask;
++      res[0].flags = IORESOURCE_MEM;
++      res[0].start = bcm63xx_regset_address(RSET_GPIO);
++      res[0].start += dir;
+-      if (gpio >= chip->ngpio)
+-              BUG();
++      res[0].end = res[0].start + 3;
+-      if (gpio < 32) {
+-              reg = gpio_out_low_reg;
+-              mask = 1 << gpio;
+-      } else {
+-              reg = GPIO_DATA_HI_REG;
+-              mask = 1 << (gpio - 32);
+-      }
++      res[1].flags = IORESOURCE_MEM;
++      res[1].start = bcm63xx_regset_address(RSET_GPIO);
++      res[1].start += data;
+-      return !!(bcm_gpio_readl(reg) & mask);
+-}
++      res[1].end = res[1].start + 3;
+-static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+-                                    unsigned gpio, int dir)
+-{
+-      u32 reg;
+-      u32 mask;
+-      u32 tmp;
+-      unsigned long flags;
+-
+-      if (gpio >= chip->ngpio)
+-              BUG();
+-
+-      if (gpio < 32) {
+-              reg = GPIO_CTL_LO_REG;
+-              mask = 1 << gpio;
+-      } else {
+-              reg = GPIO_CTL_HI_REG;
+-              mask = 1 << (gpio - 32);
+-      }
+-
+-      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+-      tmp = bcm_gpio_readl(reg);
+-      if (dir == BCM63XX_GPIO_DIR_IN)
+-              tmp &= ~mask;
+-      else
+-              tmp |= mask;
+-      bcm_gpio_writel(tmp, reg);
+-      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++      pdata.base = id * 32;
++      pdata.ngpio = ngpio;
+-      return 0;
++      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
++                                        &pdata, sizeof(pdata));
+ }
+-static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++int __init bcm63xx_gpio_init(void)
+ {
+-      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
+-}
++      int ngpio = bcm63xx_gpio_count();
++      int data_low_reg;
+-static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+-                                       unsigned gpio, int value)
+-{
+-      bcm63xx_gpio_set(chip, gpio, value);
+-      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
+-}
++      if (BCMCPU_IS_6345())
++              data_low_reg = GPIO_DATA_LO_REG_6345;
++      else
++              data_low_reg = GPIO_DATA_LO_REG;
++      bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
+-static struct gpio_chip bcm63xx_gpio_chip = {
+-      .label                  = "bcm63xx-gpio",
+-      .direction_input        = bcm63xx_gpio_direction_input,
+-      .direction_output       = bcm63xx_gpio_direction_output,
+-      .get                    = bcm63xx_gpio_get,
+-      .set                    = bcm63xx_gpio_set,
+-      .base                   = 0,
+-};
++      if (ngpio <= 32)
++              return 0;
+-int __init bcm63xx_gpio_init(void)
+-{
+-      bcm63xx_gpio_out_low_reg_init();
++      bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
+-      gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
+-      if (!BCMCPU_IS_6345())
+-              gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+-      bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+-      pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
++      return 0;
+-      return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
+ }
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
+ int __init bcm63xx_register_devices(void)
+ {
+-      /* register gpiochip */
+-      bcm63xx_gpio_init();
+-
+       return board_register_devices();
+ }
diff --git a/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
new file mode 100644 (file)
index 0000000..c061ec4
--- /dev/null
@@ -0,0 +1,129 @@
+From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:21:59 +0100
+Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
+ arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
+ arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
+ 5 files changed, 42 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -55,7 +55,7 @@ static struct board_info __initdata boar
+       },
+       .ephy_reset_gpio                = 36,
+-      .ephy_reset_gpio_flags          = GPIOF_INIT_HIGH,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+ #endif
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -247,9 +247,10 @@ int __init board_register_devices(void)
+       platform_device_register(&bcm63xx_gpio_leds);
+-      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+-              gpio_request_one(board.ephy_reset_gpio,
+-                              board.ephy_reset_gpio_flags, "ephy-reset");
++      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
++              bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
++                                      board.ephy_reset_gpio_flags);
++      }
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -8,15 +8,23 @@
+  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+  */
++#include <asm/addrspace.h>
++
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio/driver.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
++static const char * const gpio_chip_labels[] = {
++      "bcm63xx-gpio.0",
++      "bcm63xx-gpio.1",
++};
++
+ static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+       struct resource res[2];
+@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
+       return 0;
+ }
++
++static struct gpiod_lookup_table ephy_reset = {
++      .dev_id = "bcm63xx_enet-0",
++      .table = {
++              { /* filled at runtime */ },
++              { },
++      },
++};
++
++
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
++{
++      if (ephy_reset.table[0].chip_label)
++              return;
++
++      ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
++      ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
++      ephy_reset.table[0].con_id = "reset";
++      ephy_reset.table[0].flags = flags;
++
++      gpiod_add_lookup_table(&ephy_reset);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -3,9 +3,11 @@
+ #define BCM63XX_GPIO_H
+ #include <linux/init.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cpu.h>
+ int __init bcm63xx_gpio_init(void);
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/gpio.h>
++#include <linux/gpio/machine.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -50,8 +51,8 @@ struct board_info {
+       /* External PHY reset GPIO */
+       unsigned int ephy_reset_gpio;
+-      /* External PHY reset GPIO flags from gpio.h */
+-      unsigned long ephy_reset_gpio_flags;
++      /* External PHY reset GPIO flags from gpio/machine.h */
++      enum gpio_lookup_flags ephy_reset_gpio_flags;
+       /* fallback sprom config */
+       struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
new file mode 100644 (file)
index 0000000..6eb1bd0
--- /dev/null
@@ -0,0 +1,35 @@
+From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:26:50 +0100
+Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
+present in dtb
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/gpio.c |   7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -20,6 +20,8 @@
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
++#include "boards/board_common.h"
++
+ static const char * const gpio_chip_labels[] = {
+       "bcm63xx-gpio.0",
+       "bcm63xx-gpio.1",
+@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
+       pdata.base = id * 32;
+       pdata.ngpio = ngpio;
+-      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+-                                        &pdata, sizeof(pdata));
++      if (!board_of_device_present("gpio0") &&
++          !board_of_device_present("pinctrl"))
++              platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
++                                                2, &pdata, sizeof(pdata));
+ }
+ int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
new file mode 100644 (file)
index 0000000..b571999
--- /dev/null
@@ -0,0 +1,59 @@
+From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 25 Mar 2015 13:52:02 +0100
+Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
+ ready gpio
+
+To prepare for a time when gpiobases don't need to be fixed anymore.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-pcmcia.c
++++ b/arch/mips/bcm63xx/dev-pcmcia.c
+@@ -10,6 +10,7 @@
+ #include <linux/kernel.h>
+ #include <asm/bootinfo.h>
+ #include <linux/platform_device.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cs.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_pcmcia.h>
+@@ -101,6 +102,14 @@ static const struct {
+       },
+ };
++static struct gpiod_lookup_table pcmcia_gpios_table = {
++      .dev_id = "bcm63xx_pcmcia.0",
++      .table = {
++              GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
++              { },
++      },
++};
++
+ int __init bcm63xx_pcmcia_register(void)
+ {
+       int ret, i;
+@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6348_CPU_ID:
+               pd.ready_gpio = 22;
++              pcmcia_gpios_table.table[0].chip_hwnum = 22;
+               break;
+       case BCM6358_CPU_ID:
+               pd.ready_gpio = 18;
++              pcmcia_gpios_table.table[0].chip_hwnum = 18;
+               break;
+       default:
+               return -ENODEV;
+       }
++      gpiod_add_lookup_table(&pcmcia_gpios_table);
++
+       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+       pcmcia_resources[0].end = pcmcia_resources[0].start +
+               RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
new file mode 100644 (file)
index 0000000..2534171
--- /dev/null
@@ -0,0 +1,59 @@
+From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 25 Mar 2015 13:54:56 +0100
+Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
+
+Use the new named gpio instead of relying on the hardware gpio numbers
+matching the virtual gpio numbers.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
+ drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/pcmcia/bcm63xx_pcmcia.c
++++ b/drivers/pcmcia/bcm63xx_pcmcia.c
+@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
+               stat |= SS_XVCARD;
+       stat |= SS_POWERON;
+-      if (gpio_get_value(skt->pd->ready_gpio))
++      if (gpiod_get_value(skt->ready_gpio))
+               stat |= SS_READY;
+       return stat;
+@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
+               goto err;
+       }
++      /* get ready gpio */
++      skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
++      if (IS_ERR(skt->ready_gpio)) {
++              ret = PTR_ERR(skt->ready_gpio);
++              goto err;
++      }
++
+       /* resources are static */
+       sock->resource_ops = &pccard_static_ops;
+       sock->ops = &bcm63xx_pcmcia_operations;
+--- a/drivers/pcmcia/bcm63xx_pcmcia.h
++++ b/drivers/pcmcia/bcm63xx_pcmcia.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/timer.h>
++#include <linux/gpio/consumer.h>
+ #include <pcmcia/ss.h>
+ #include <bcm63xx_dev_pcmcia.h>
+@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
+       /* base address of io memory */
+       void __iomem *io_base;
++
++      /* ready gpio */
++      struct gpio_desc *ready_gpio;
+ };
+ #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..5d4265f
--- /dev/null
@@ -0,0 +1,96 @@
+From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:38:05 +0200
+Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6318 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
+ 1 file changed, 79 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
+@@ -0,0 +1,79 @@
++* Broadcom BCM6318 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6318-pinctrl".
++- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
++- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
++- gpio-controller: Identifies this node as a gpio controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6318-pinctrl";
++      reg = <0x10000080 0x08>,
++            <0x10000088 0x08>,
++            <0x10000098 0x04>,
++            <0x1000009c 0x0c>,
++            <0x100000d4 0x18>;
++      reg-names = "dirout", "dat", "mode", "mux", "pad";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       led, ephy0_spd_led
++gpio1         1       led, ephy1_spd_led
++gpio2         2       led, ephy2_spd_led
++gpio3         3       led, ephy3_spd_led
++gpio4         4       led, ephy0_act_led
++gpio5         5       led, ephy1_act_led
++gpio6         6       led, ephy2_act_led, serial_led_data
++gpio7         7       led, ephy3_act_led, serial_led_clk
++gpio8         8       led, inet_act_led
++gpio9         9       led, inet_fail_led
++gpio10                10      led, dsl_led
++gpio11                11      led, post_fail_led
++gpio12                12      led, wlan_wps_led
++gpio13                13      led, usb_pwron, usb_device_led
++gpio14                14      led
++gpio15                15      led
++gpio16                16      led
++gpio17                17      led
++gpio18                18      led
++gpio19                19      led
++gpio20                20      led
++gpio21                21      led
++gpio22                22      led
++gpio23                23      led
++gpio24                24      -
++gpio25                25      -
++gpio26                26      -
++gpio27                27      -
++gpio28                28      -
++gpio29                29      -
++gpio30                30      -
++gpio31                31      -
++gpio32                32      -
++gpio33                33      -
++gpio34                34      -
++gpio35                35      -
++gpio36                36      -
++gpio37                37      -
++gpio38                38      -
++gpio39                39      -
++gpio40                40      usb_active
++gpio41                41      -
++gpio42                42      -
++gpio43                43      -
++gpio44                44      -
++gpio45                45      -
++gpio46                46      -
++gpio47                47      -
++gpio48                48      -
++gpio49                49      -
diff --git a/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..2a89dde
--- /dev/null
@@ -0,0 +1,609 @@
+From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:20:39 +0200
+Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
+
+Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
+to different functions. BCM6318 is similar to BCM6328 with the addition
+of a pad register, and the GPIO meaning of the mux register changes
+based on the GPIO number.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
+ 3 files changed, 572 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
+       bool
+       select GPIO_GENERIC
++config PINCTRL_BCM6318
++      bool "BCM6318 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++
+ config PINCTRL_BCM6328
+       bool "BCM6328 pincontrol driver" if COMPILE_TEST
+       select PINMUX
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
++obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
+@@ -0,0 +1,564 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6318_NGPIO         50
++
++struct bcm6318_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6318_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned mode_val:1;
++      unsigned mux_val:2;
++};
++
++struct bcm6318_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      void __iomem *mux[3];
++      void __iomem *pad[6];
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++static const struct pinctrl_pin_desc bcm6318_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++      PINCTRL_PIN(48, "gpio48"),
++      PINCTRL_PIN(49, "gpio49"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++static unsigned gpio48_pins[] = { 48 };
++static unsigned gpio49_pins[] = { 49 };
++
++#define BCM6318_GROUP(n)                                      \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm6318_pingroup bcm6318_groups[] = {
++      BCM6318_GROUP(gpio0),
++      BCM6318_GROUP(gpio1),
++      BCM6318_GROUP(gpio2),
++      BCM6318_GROUP(gpio3),
++      BCM6318_GROUP(gpio4),
++      BCM6318_GROUP(gpio5),
++      BCM6318_GROUP(gpio6),
++      BCM6318_GROUP(gpio7),
++      BCM6318_GROUP(gpio8),
++      BCM6318_GROUP(gpio9),
++      BCM6318_GROUP(gpio10),
++      BCM6318_GROUP(gpio11),
++      BCM6318_GROUP(gpio12),
++      BCM6318_GROUP(gpio13),
++      BCM6318_GROUP(gpio14),
++      BCM6318_GROUP(gpio15),
++      BCM6318_GROUP(gpio16),
++      BCM6318_GROUP(gpio17),
++      BCM6318_GROUP(gpio18),
++      BCM6318_GROUP(gpio19),
++      BCM6318_GROUP(gpio20),
++      BCM6318_GROUP(gpio21),
++      BCM6318_GROUP(gpio22),
++      BCM6318_GROUP(gpio23),
++      BCM6318_GROUP(gpio24),
++      BCM6318_GROUP(gpio25),
++      BCM6318_GROUP(gpio26),
++      BCM6318_GROUP(gpio27),
++      BCM6318_GROUP(gpio28),
++      BCM6318_GROUP(gpio29),
++      BCM6318_GROUP(gpio30),
++      BCM6318_GROUP(gpio31),
++      BCM6318_GROUP(gpio32),
++      BCM6318_GROUP(gpio33),
++      BCM6318_GROUP(gpio34),
++      BCM6318_GROUP(gpio35),
++      BCM6318_GROUP(gpio36),
++      BCM6318_GROUP(gpio37),
++      BCM6318_GROUP(gpio38),
++      BCM6318_GROUP(gpio39),
++      BCM6318_GROUP(gpio40),
++      BCM6318_GROUP(gpio41),
++      BCM6318_GROUP(gpio42),
++      BCM6318_GROUP(gpio43),
++      BCM6318_GROUP(gpio44),
++      BCM6318_GROUP(gpio45),
++      BCM6318_GROUP(gpio46),
++      BCM6318_GROUP(gpio47),
++      BCM6318_GROUP(gpio48),
++      BCM6318_GROUP(gpio49),
++};
++
++/* GPIO_MODE */
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++/* PINMUX_SEL */
++static const char * const ephy0_spd_led_groups[] = {
++      "gpio0",
++};
++
++static const char * const ephy1_spd_led_groups[] = {
++      "gpio1",
++};
++
++static const char * const ephy2_spd_led_groups[] = {
++      "gpio2",
++};
++
++static const char * const ephy3_spd_led_groups[] = {
++      "gpio3",
++};
++
++static const char * const ephy0_act_led_groups[] = {
++      "gpio4",
++};
++
++static const char * const ephy1_act_led_groups[] = {
++      "gpio5",
++};
++
++static const char * const ephy2_act_led_groups[] = {
++      "gpio6",
++};
++
++static const char * const ephy3_act_led_groups[] = {
++      "gpio7",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio6",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_act_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const inet_fail_led_groups[] = {
++      "gpio9",
++};
++
++static const char * const dsl_led_groups[] = {
++      "gpio10",
++};
++
++static const char * const post_fail_led_groups[] = {
++      "gpio11",
++};
++
++static const char * const wlan_wps_led_groups[] = {
++      "gpio12",
++};
++
++static const char * const usb_pwron_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_active_groups[] = {
++      "gpio40",
++};
++
++#define BCM6318_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mode_val = 1,                          \
++      }
++
++#define BCM6318_MUX_FUN(n, mux)                               \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mux_val = mux,                         \
++      }
++
++static const struct bcm6318_function bcm6318_funcs[] = {
++      BCM6318_MODE_FUN(led),
++      BCM6318_MUX_FUN(ephy0_spd_led, 1),
++      BCM6318_MUX_FUN(ephy1_spd_led, 1),
++      BCM6318_MUX_FUN(ephy2_spd_led, 1),
++      BCM6318_MUX_FUN(ephy3_spd_led, 1),
++      BCM6318_MUX_FUN(ephy0_act_led, 1),
++      BCM6318_MUX_FUN(ephy1_act_led, 1),
++      BCM6318_MUX_FUN(ephy2_act_led, 1),
++      BCM6318_MUX_FUN(ephy3_act_led, 1),
++      BCM6318_MUX_FUN(serial_led_data, 3),
++      BCM6318_MUX_FUN(serial_led_clk, 3),
++      BCM6318_MUX_FUN(inet_act_led, 1),
++      BCM6318_MUX_FUN(inet_fail_led, 1),
++      BCM6318_MUX_FUN(dsl_led, 1),
++      BCM6318_MUX_FUN(post_fail_led, 1),
++      BCM6318_MUX_FUN(wlan_wps_led, 1),
++      BCM6318_MUX_FUN(usb_pwron, 1),
++      BCM6318_MUX_FUN(usb_device_led, 2),
++      BCM6318_MUX_FUN(usb_active, 2),
++};
++
++static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6318_groups);
++}
++
++static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6318_groups[group].name;
++}
++
++static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6318_groups[group].pins;
++      *num_pins = bcm6318_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6318_funcs);
++}
++
++static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6318_funcs[selector].name;
++}
++
++static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6318_funcs[selector].groups;
++      *num_groups = bcm6318_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
++                          u32 mode, u32 mux)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (pin < 32) {
++              reg = __raw_readl(pctl->mode);
++              reg &= ~BIT(pin);
++              if (mode)
++                      reg |= BIT(pin);
++              __raw_writel(reg, pctl->mode);
++      }
++
++      if (pin < 48) {
++              reg = __raw_readl(pctl->mux[pin / 16]);
++              reg &= ~(3UL << ((pin % 16) * 2));
++              reg |= mux << ((pin % 16) * 2);
++              __raw_writel(reg, pctl->mux[pin / 16]);
++      }
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      reg = __raw_readl(pctl->pad[pin / 8]);
++      reg &= ~(0xfUL << ((pin % 8) * 4));
++      reg |= val << ((pin % 8) * 4);
++      __raw_writel(reg, pctl->pad[pin / 8]);
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
++      const struct bcm6318_function *f = &bcm6318_funcs[selector];
++
++      bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
++
++      return 0;
++}
++
++static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      if (offset < 13) {
++              /* GPIOs 0-12 use mux 0 as GPIO function */
++              bcm6318_rmw_mux(pctl, offset, 0, 0);
++      } else if (offset < 42) {
++              /* GPIOs 13-41 use mux 3 as GPIO function */
++              bcm6318_rmw_mux(pctl, offset, 0, 3);
++
++              /* FIXME: revert to old value for non gpio? */
++              bcm6318_set_pad(pctl, offset, 0);
++      } else {
++              /* no idea, really */
++      }
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6318_pctl_ops = {
++      .get_groups_count       = bcm6318_pinctrl_get_group_count,
++      .get_group_name         = bcm6318_pinctrl_get_group_name,
++      .get_group_pins         = bcm6318_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6318_pmx_ops = {
++      .get_functions_count    = bcm6318_pinctrl_get_func_count,
++      .get_function_name      = bcm6318_pinctrl_get_func_name,
++      .get_function_groups    = bcm6318_pinctrl_get_groups,
++      .set_mux                = bcm6318_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6318_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6318_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6318_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode, *mux, *pad;
++      unsigned i;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
++      mux = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mux))
++              return PTR_ERR(mux);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
++      pad = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(pad))
++              return PTR_ERR(pad);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      for (i = 0; i < 3; i++)
++              pctl->mux[i] = mux + (i * 4);
++
++      for (i = 0; i < 6; i++)
++              pctl->pad[i] = pad + (i * 4);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6318_pctl_ops;
++      pctl->desc.pmxops = &bcm6318_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
++      pctl->desc.pins = bcm6318_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6318_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6318_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6318-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6318_pinctrl_driver = {
++      .probe = bcm6318_pinctrl_probe,
++      .driver = {
++              .name = "bcm6318-pinctrl",
++              .of_match_table = bcm6318_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch b/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch
new file mode 100644 (file)
index 0000000..67c8cee
--- /dev/null
@@ -0,0 +1,65 @@
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6318
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6328
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select PINCTRL
++      select PINCTRL_BCM6348
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6358
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6362
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6368
+ config BCM63XX_CPU_63268
+       bool "support 63268 CPU"
+@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM63268
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
new file mode 100644 (file)
index 0000000..fe4dbe3
--- /dev/null
@@ -0,0 +1,105 @@
+From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 31 Jul 2017 20:10:36 +0200
+Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
+
+---
+ arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
new file mode 100644 (file)
index 0000000..03b8bfc
--- /dev/null
@@ -0,0 +1,172 @@
+From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sat, 4 Feb 2017 12:58:50 +0100
+Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
+
+We now register them through DT, so no need to keep them here.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -27,9 +27,7 @@
+ #include <bcm63xx_dev_pci.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_flash.h>
+-#include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+-#include <bcm63xx_dev_spi.h>
+ #include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -236,10 +234,6 @@ int __init board_register_devices(void)
+            bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
+               pr_err(PFX "failed to register fallback SPROM\n");
+-      bcm63xx_spi_register();
+-
+-      bcm63xx_hsspi_register();
+-
+       bcm63xx_flash_register();
+       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+-                 dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
++                 dev-rng.o dev-uart.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+                  sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/platform_device.h>
+-
+-#include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_hsspi.h>
+-#include <bcm63xx_regs.h>
+-
+-static struct resource spi_resources[] = {
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .end            = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_hsspi_device = {
+-      .name           = "bcm63xx-hsspi",
+-      .id             = 0,
+-      .num_resources  = ARRAY_SIZE(spi_resources),
+-      .resource       = spi_resources,
+-};
+-
+-int __init bcm63xx_hsspi_register(void)
+-{
+-      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
+-              !BCMCPU_IS_63268())
+-              return -ENODEV;
+-
+-      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+-      spi_resources[0].end = spi_resources[0].start;
+-      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+-      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+-
+-      return platform_device_register(&bcm63xx_hsspi_device);
+-}
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ /dev/null
+@@ -1,60 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/export.h>
+-#include <linux/platform_device.h>
+-#include <linux/err.h>
+-#include <linux/clk.h>
+-
+-#include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_spi.h>
+-#include <bcm63xx_regs.h>
+-
+-static struct resource spi_resources[] = {
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .end            = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_spi_device = {
+-      .id             = -1,
+-      .num_resources  = ARRAY_SIZE(spi_resources),
+-      .resource       = spi_resources,
+-};
+-
+-int __init bcm63xx_spi_register(void)
+-{
+-      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+-              return -ENODEV;
+-
+-      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+-      spi_resources[0].end = spi_resources[0].start;
+-      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+-
+-      if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+-              bcm63xx_spi_device.name = "bcm6348-spi",
+-              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
+-      }
+-
+-      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+-              bcm63xx_spi_device.name = "bcm6358-spi",
+-              spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+-      }
+-
+-      return platform_device_register(&bcm63xx_spi_device);
+-}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
++++ /dev/null
+@@ -1,9 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
+-#ifndef BCM63XX_DEV_HSSPI_H
+-#define BCM63XX_DEV_HSSPI_H
+-
+-#include <linux/types.h>
+-
+-int bcm63xx_hsspi_register(void);
+-
+-#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch
new file mode 100644 (file)
index 0000000..e9d4481
--- /dev/null
@@ -0,0 +1,259 @@
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+-                 dev-rng.o dev-uart.o dev-wdt.o \
++                 dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+                  sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+--- a/arch/mips/bcm63xx/dev-uart.c
++++ /dev/null
+@@ -1,76 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/platform_device.h>
+-#include <bcm63xx_cpu.h>
+-
+-static struct resource uart0_resources[] = {
+-      {
+-              /* start & end filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              /* start filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct resource uart1_resources[] = {
+-      {
+-              /* start & end filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              /* start filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_uart_devices[] = {
+-      {
+-              .name           = "bcm63xx_uart",
+-              .id             = 0,
+-              .num_resources  = ARRAY_SIZE(uart0_resources),
+-              .resource       = uart0_resources,
+-      },
+-
+-      {
+-              .name           = "bcm63xx_uart",
+-              .id             = 1,
+-              .num_resources  = ARRAY_SIZE(uart1_resources),
+-              .resource       = uart1_resources,
+-      }
+-};
+-
+-int __init bcm63xx_uart_register(unsigned int id)
+-{
+-      if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+-              return -ENODEV;
+-
+-      if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
+-              !BCMCPU_IS_6368()))
+-              return -ENODEV;
+-
+-      if (id == 0) {
+-              uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+-              uart0_resources[0].end = uart0_resources[0].start +
+-                      RSET_UART_SIZE - 1;
+-              uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+-      }
+-
+-      if (id == 1) {
+-              uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
+-              uart1_resources[0].end = uart1_resources[0].start +
+-                      RSET_UART_SIZE - 1;
+-              uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
+-      }
+-
+-      return platform_device_register(&bcm63xx_uart_devices[id]);
+-}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
++++ /dev/null
+@@ -1,7 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
+-#ifndef BCM63XX_DEV_UART_H_
+-#define BCM63XX_DEV_UART_H_
+-
+-int bcm63xx_uart_register(unsigned int id);
+-
+-#endif /* BCM63XX_DEV_UART_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -32,8 +32,6 @@ struct board_info {
+       unsigned int    has_ohci0:1;
+       unsigned int    has_ehci0:1;
+       unsigned int    has_usbd:1;
+-      unsigned int    has_uart0:1;
+-      unsigned int    has_uart1:1;
+       unsigned int    use_fallback_sprom:1;
+       /* ethernet config */
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -20,7 +20,6 @@
+ #include <asm/prom.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_gpio.h>
+@@ -188,12 +187,6 @@ int __init board_register_devices(void)
+       bcm63xx_gpio_init();
+-      if (board.has_uart0)
+-              bcm63xx_uart_register(0);
+-
+-      if (board.has_uart1)
+-              bcm63xx_uart_register(1);
+-
+       if (board.has_pccard)
+               bcm63xx_pcmcia_register();
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -35,9 +35,6 @@ static struct board_info __initdata boar
+       .name                           = "CVG834G_E15R3921",
+       .expected_cpu_id                = 0x3368,
+-      .has_uart0                      = 1,
+-      .has_uart1                      = 1,
+-
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
+@@ -67,7 +64,6 @@ static struct board_info __initdata boar
+       .name                           = "96328avng",
+       .expected_cpu_id                = 0x6328,
+-      .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .has_usbd                       = 0,
+       .use_fallback_sprom             = 1,
+@@ -116,7 +112,6 @@ static struct board_info __initdata boar
+       .name                           = "96338GW",
+       .expected_cpu_id                = 0x6338,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+@@ -159,7 +154,6 @@ static struct board_info __initdata boar
+       .name                           = "96338W",
+       .expected_cpu_id                = 0x6338,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+@@ -204,8 +198,6 @@ static struct board_info __initdata boar
+ static struct board_info __initdata board_96345gw2 = {
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+-
+-      .has_uart0                      = 1,
+ };
+ #endif
+@@ -217,7 +209,6 @@ static struct board_info __initdata boar
+       .name                           = "96348R",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
+       .use_fallback_sprom             = 1,
+@@ -262,7 +253,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-10",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -315,7 +305,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-11",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -370,7 +359,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -421,7 +409,6 @@ static struct board_info __initdata boar
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -466,7 +453,6 @@ static struct board_info __initdata boar
+       .name                           = "DV201AMR",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .use_fallback_sprom             = 1,
+       .has_ohci0                      = 1,
+@@ -487,7 +473,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-A",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -514,7 +499,6 @@ static struct board_info __initdata boar
+       .name                           = "96358VW",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -567,7 +551,6 @@ static struct board_info __initdata boar
+       .name                           = "96358VW2",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -617,7 +600,6 @@ static struct board_info __initdata boar
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
diff --git a/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
new file mode 100644 (file)
index 0000000..e139426
--- /dev/null
@@ -0,0 +1,343 @@
+From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Feb 2015 17:52:32 +0100
+Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
+ 1 file changed, 262 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -43,14 +43,6 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+-      .leds = {
+-              {
+-                      .name           = "CVG834G:green:power",
+-                      .gpio           = 37,
+-                      .default_trigger= "default-on",
+-              },
+-      },
+-
+       .ephy_reset_gpio                = 36,
+       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+@@ -72,35 +64,6 @@ static struct board_info __initdata boar
+               .use_fullspeed          = 0,
+               .port_no                = 0,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "96328avng::ppp-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::power",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "96328avng::power-fail",
+-                      .gpio           = 8,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::wps",
+-                      .gpio           = 9,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::ppp",
+-                      .gpio           = 11,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ #endif
+@@ -119,35 +82,6 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ses",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              }
+-      },
+ };
+ static struct board_info __initdata board_96338w = {
+@@ -159,35 +93,6 @@ static struct board_info __initdata boar
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ses",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ #endif
+@@ -217,36 +122,6 @@ static struct board_info __initdata boar
+               .has_phy                = 1,
+               .use_internal_phy       = 1,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw_10 = {
+@@ -270,35 +145,6 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+       .has_pccard                     = 1,
+       .has_ehci0                      = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw_11 = {
+@@ -324,35 +170,6 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw = {
+@@ -374,35 +191,6 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_FAST2404 = {
+@@ -518,33 +306,6 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 15,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 22,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 23,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 4,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 5,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96358vw2 = {
+@@ -571,29 +332,6 @@ static struct board_info __initdata boar
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+       .num_usbh_ports                 = 2,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 22,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 23,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch b/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch
new file mode 100644 (file)
index 0000000..c693ace
--- /dev/null
@@ -0,0 +1,65 @@
+From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
+ drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
+ drivers/mtd/redboot.c                     |   13 +++++++++--
+ 3 files changed, 38 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
+       }
+ };
+-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
++static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ static struct physmap_flash_data flash_data = {
+       .width                  = 2,
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
+       int nulllen = 0;
+       int numslots;
+       unsigned long offset;
++      unsigned long fis_origin = 0;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+       static char nullstring[] = "unallocated";
+ #endif
+@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
+               goto out;
+       }
++      if (data && data->origin) {
++              fis_origin = data->origin;
++      } else {
++              for (i = 0; i < numslots; i++) {
++                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
++                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
++                      }
++              }
++      }
++
+       for (i = 0; i < numslots; i++) {
+               struct fis_list *new_fl, **prev;
+@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
+                       goto out;
+               }
+               new_fl->img = &buf[i];
+-              if (data && data->origin)
+-                      buf[i].flash_base -= data->origin;
+-              else
+-                      buf[i].flash_base &= master->size-1;
++              if (fis_origin)
++                      buf[i].flash_base -= fis_origin;
++
++              buf[i].flash_base &= (master->size << 1) - 1;
+               /* I'm sure the JFFS2 code has done me permanent damage.
+                * I now think the following is _normal_
diff --git a/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch
new file mode 100644 (file)
index 0000000..efefba4
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/include/linux/bcm963xx_tag.h
++++ b/include/linux/bcm963xx_tag.h
+@@ -92,8 +92,10 @@ struct bcm_tag {
+       __u32 rootfs_crc;
+       /* 224-227: CRC32 of kernel partition */
+       __u32 kernel_crc;
+-      /* 228-235: Unused at present */
+-      char reserved1[8];
++      /* 228-231: Unused at present */
++      char reserved1[4];
++      /* 222-235: Openwrt: real rootfs length */
++      __u32 real_rootfs_length;
+       /* 236-239: CRC32 of header excluding last 20 bytes */
+       __u32 header_crc;
+       /* 240-255: Unused at present */
+--- a/drivers/mtd/parsers/parser_imagetag.c
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti
+               } else {
+                       /* OpenWrt layout */
+                       rootfsaddr = kerneladdr + kernellen;
+-                      rootfslen = spareaddr - rootfsaddr;
++                      rootfslen = buf->real_rootfs_length;
++                      spareaddr = rootfsaddr + rootfslen;
+               }
+       } else {
+               goto out;
diff --git a/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644 (file)
index 0000000..3604910
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1637,7 +1637,7 @@ static int bcm_enet_change_mtu(struct ne
+               return -EBUSY;
+       /* add ethernet header + vlan tag size */
+-      actual_mtu += VLAN_ETH_HLEN;
++      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+       /*
+        * setup maximum size before we get overflow mark in
diff --git a/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch b/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch
new file mode 100644 (file)
index 0000000..efd9763
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G3_EXT_MII |
+                               GPIO_MODE_6348_G0_EXT_MII;
++              else if (BCMCPU_IS_6358())
++                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -652,6 +652,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
+ #define GPIO_MODE_6358_UTOPIA         (1 << 12)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
+ #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
+ #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
new file mode 100644 (file)
index 0000000..c9532e6
--- /dev/null
@@ -0,0 +1,269 @@
+From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 6 Jan 2012 12:24:18 +0100
+Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
+
+Only connect/disconnect the phy during probe and remove, not during any
+open/close. The phy seldom changes during the runtime, and disconnecting
+the phy during close will prevent it from keeping any configuration over
+a down/up cycle.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
+ 1 file changed, 78 insertions(+), 80 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
+       struct bcm_enet_priv *priv;
+       struct sockaddr addr;
+       struct device *kdev;
+-      struct phy_device *phydev;
+       int i, ret;
+       unsigned int size;
+-      char phy_id[MII_BUS_ID_SIZE + 3];
+       void *p;
+       u32 val;
+@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
+       kdev = &priv->pdev->dev;
+       if (priv->has_phy) {
+-              /* connect to PHY */
+-              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+-                       priv->mii_bus->id, priv->phy_id);
+-
+-              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
+-                                   PHY_INTERFACE_MODE_MII);
+-
+-              if (IS_ERR(phydev)) {
+-                      dev_err(kdev, "could not attach to PHY\n");
+-                      return PTR_ERR(phydev);
+-              }
+-
+-              /* mask with MAC supported features */
+-              phydev->supported &= (SUPPORTED_10baseT_Half |
+-                                    SUPPORTED_10baseT_Full |
+-                                    SUPPORTED_100baseT_Half |
+-                                    SUPPORTED_100baseT_Full |
+-                                    SUPPORTED_Autoneg |
+-                                    SUPPORTED_Pause |
+-                                    SUPPORTED_MII);
+-              phydev->advertising = phydev->supported;
+-
+-              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
+-                      phydev->advertising |= SUPPORTED_Pause;
+-              else
+-                      phydev->advertising &= ~SUPPORTED_Pause;
+-
+-              phy_attached_info(phydev);
+-
++              /* Reset state */
+               priv->old_link = 0;
+               priv->old_duplex = -1;
+               priv->old_pause = -1;
+-      } else {
+-              phydev = NULL;
+       }
+       /* mask all interrupts and request them */
+@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
+       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+       if (ret)
+-              goto out_phy_disconnect;
++              return ret;
+       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
+                         dev->name, dev);
+@@ -1086,8 +1054,8 @@ static int bcm_enet_open(struct net_devi
+       enet_dmac_writel(priv, priv->dma_chan_int_mask,
+                        ENETDMAC_IRMASK, priv->tx_chan);
+-      if (phydev)
+-              phy_start(phydev);
++      if (priv->has_phy)
++              phy_start(dev->phydev);
+       else
+               bcm_enet_adjust_link(dev);
+@@ -1128,10 +1096,6 @@ out_freeirq_rx:
+ out_freeirq:
+       free_irq(dev->irq, dev);
+-out_phy_disconnect:
+-      if (phydev)
+-              phy_disconnect(phydev);
+-
+       return ret;
+ }
+@@ -1236,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi
+       free_irq(priv->irq_rx, dev);
+       free_irq(dev->irq, dev);
+-      /* release phy */
+-      if (priv->has_phy)
+-              phy_disconnect(dev->phydev);
+-
+       return 0;
+ }
+@@ -1805,14 +1765,49 @@ static int bcm_enet_probe(struct platfor
+       /* do minimal hardware init to be able to probe mii bus */
+       bcm_enet_hw_preinit(priv);
++      spin_lock_init(&priv->rx_lock);
++
++      /* init rx timeout (used for oom) */
++      init_timer(&priv->rx_timeout);
++      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
++      priv->rx_timeout.data = (unsigned long)dev;
++
++      /* init the mib update lock&work */
++      mutex_init(&priv->mib_update_lock);
++      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
++
++      /* zero mib counters */
++      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
++              enet_writel(priv, 0, ENET_MIB_REG(i));
++
++      /* register netdevice */
++      dev->netdev_ops = &bcm_enet_ops;
++      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
++
++      dev->ethtool_ops = &bcm_enet_ethtool_ops;
++      /* MTU range: 46 - 2028 */
++      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
++      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
++      SET_NETDEV_DEV(dev, &pdev->dev);
++
++      ret = register_netdev(dev);
++      if (ret)
++              goto out_uninit_hw;
++
++      netif_carrier_off(dev);
++      platform_set_drvdata(pdev, dev);
++      priv->pdev = pdev;
++      priv->net_dev = dev;
+       /* MII bus registration */
+       if (priv->has_phy) {
++              struct phy_device *phydev;
++              char phy_id[MII_BUS_ID_SIZE + 3];
+               priv->mii_bus = mdiobus_alloc();
+               if (!priv->mii_bus) {
+                       ret = -ENOMEM;
+-                      goto out_uninit_hw;
++                      goto out_unregister_netdev;
+               }
+               bus = priv->mii_bus;
+@@ -1836,6 +1831,35 @@ static int bcm_enet_probe(struct platfor
+                       dev_err(&pdev->dev, "unable to register mdio bus\n");
+                       goto out_free_mdio;
+               }
++
++              /* connect to PHY */
++              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
++                       priv->mii_bus->id, priv->phy_id);
++
++              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
++                                   PHY_INTERFACE_MODE_MII);
++
++              if (IS_ERR(phydev)) {
++                      dev_err(&pdev->dev, "could not attach to PHY\n");
++                      goto out_unregister_mdio;
++              }
++
++              /* mask with MAC supported features */
++              phydev->supported &= (SUPPORTED_10baseT_Half |
++                                    SUPPORTED_10baseT_Full |
++                                    SUPPORTED_100baseT_Half |
++                                    SUPPORTED_100baseT_Full |
++                                    SUPPORTED_Autoneg |
++                                    SUPPORTED_Pause |
++                                    SUPPORTED_MII);
++              phydev->advertising = phydev->supported;
++
++              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
++                      phydev->advertising |= SUPPORTED_Pause;
++              else
++                      phydev->advertising &= ~SUPPORTED_Pause;
++
++              phy_attached_info(phydev);
+       } else {
+               /* run platform code to initialize PHY device */
+@@ -1843,47 +1867,16 @@ static int bcm_enet_probe(struct platfor
+                   pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
+                                  bcm_enet_mdio_write_mii)) {
+                       dev_err(&pdev->dev, "unable to configure mdio bus\n");
+-                      goto out_uninit_hw;
++                      goto out_unregister_netdev;
+               }
+       }
+-      spin_lock_init(&priv->rx_lock);
+-
+-      /* init rx timeout (used for oom) */
+-      init_timer(&priv->rx_timeout);
+-      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
+-      priv->rx_timeout.data = (unsigned long)dev;
+-
+-      /* init the mib update lock&work */
+-      mutex_init(&priv->mib_update_lock);
+-      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
+-
+-      /* zero mib counters */
+-      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
+-              enet_writel(priv, 0, ENET_MIB_REG(i));
+-
+-      /* register netdevice */
+-      dev->netdev_ops = &bcm_enet_ops;
+-      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
+-
+-      dev->ethtool_ops = &bcm_enet_ethtool_ops;
+-      /* MTU range: 46 - 2028 */
+-      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
+-      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
+-      SET_NETDEV_DEV(dev, &pdev->dev);
+-
+-      ret = register_netdev(dev);
+-      if (ret)
+-              goto out_unregister_mdio;
+-
+-      netif_carrier_off(dev);
+-      platform_set_drvdata(pdev, dev);
+-      priv->pdev = pdev;
+-      priv->net_dev = dev;
+-
+       return 0;
+ out_unregister_mdio:
++      if (dev->phydev)
++              phy_disconnect(dev->phydev);
++
+       if (priv->mii_bus)
+               mdiobus_unregister(priv->mii_bus);
+@@ -1891,6 +1884,9 @@ out_free_mdio:
+       if (priv->mii_bus)
+               mdiobus_free(priv->mii_bus);
++out_unregister_netdev:
++      unregister_netdev(dev);
++
+ out_uninit_hw:
+       /* turn off mdc clock */
+       enet_writel(priv, 0, ENET_MIISC_REG);
+@@ -1921,6 +1917,7 @@ static int bcm_enet_remove(struct platfo
+       enet_writel(priv, 0, ENET_MIISC_REG);
+       if (priv->has_phy) {
++              phy_disconnect(dev->phydev);
+               mdiobus_unregister(priv->mii_bus);
+               mdiobus_free(priv->mii_bus);
+       } else {
diff --git a/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
new file mode 100644 (file)
index 0000000..7bd1e51
--- /dev/null
@@ -0,0 +1,53 @@
+From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 15 Jul 2012 20:08:57 +0200
+Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
+ 2 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -968,6 +968,19 @@
+ #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
+ #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
++/* Port RGMII control register */
++#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
++#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
++#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
++#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
++#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
++#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
++#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
++#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
++
++/* Port RGMII timing register */
++#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
++
+ /* MDIO control register */
+ #define ENETSW_MDIOC_REG              (0xb0)
+ #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2192,6 +2192,18 @@ static int bcm_enetsw_open(struct net_de
+               priv->sw_port_link[i] = 0;
+       }
++      /* enable external ports */
++      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
++              u8 rgmii_ctrl;
++
++              if (!priv->used_ports[i].used)
++                      continue;
++
++              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
++              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
++      }
++
+       /* reset mib */
+       val = enetsw_readb(priv, ENETSW_GMCR_REG);
+       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
new file mode 100644 (file)
index 0000000..a91494d
--- /dev/null
@@ -0,0 +1,157 @@
+From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 15:00:38 +0200
+Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
+ 2 files changed, 33 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -17,6 +17,9 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/mtd/spi-nor.h>
++#include <linux/of.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
+       mtd_resources[0].end = end;
+ }
++static struct spi_board_info bcm63xx_spi_flash_info[] = {
++      {
++              .bus_num        = 0,
++              .chip_select    = 0,
++              .mode           = 0,
++              .max_speed_hz   = 781000,
++              .modalias       = "m25p80",
++      },
++};
++
++static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
++                                             unsigned int new_hz)
++{
++      struct property *max_hz;
++      __be32 *hz;
++
++      max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
++      if (!max_hz)
++              return;
++
++      max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
++      if (!max_hz->name) {
++              kfree(max_hz);
++              return;
++      }
++
++      max_hz->value = max_hz + 1;
++      max_hz->length = sizeof(*hz);
++
++      hz = max_hz->value;
++      *hz = cpu_to_be32(new_hz);
++
++      of_update_property(np, max_hz);
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+       u32 val;
+@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6318_CPU_ID:
+               /* only support serial flash */
++              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
+               return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
++
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6362_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+                       return BCM63XX_FLASH_TYPE_NAND;
+       case BCM6368_CPU_ID:
+               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
++              if (val & STRAPBUS_6368_SPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+               case STRAPBUS_6368_BOOT_SEL_NAND:
+                       return BCM63XX_FLASH_TYPE_NAND;
+@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t
+               }
+       case BCM63268_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void)
+ int __init bcm63xx_flash_register(void)
+ {
++      struct device_node *np;
+       u32 val;
+       switch (flash_type) {
+@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void)
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+-              pr_warn("unsupported serial flash detected\n");
+-              return -ENODEV;
++              np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
++              if (np) {
++                      bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
++                      of_node_put(np);
++                      return 0;
++              } else {
++                      return -ENODEV;
++              }
+       case BCM63XX_FLASH_TYPE_NAND:
+               pr_warn("unsupported NAND flash detected\n");
+               return -ENODEV;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -709,6 +709,7 @@
+ #define GPIO_STRAPBUS_REG             0x40
+ #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
+ #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
++#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
+ #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
+ #define STRAPBUS_6368_BOOT_SEL_NAND   0
+ #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
+@@ -1565,6 +1566,7 @@
+ #define IDDQ_CTRL_63268_USBH          (1 << 4)
+ #define MISC_STRAPBUS_6328_REG                0x240
++#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+ #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
new file mode 100644 (file)
index 0000000..16d47b4
--- /dev/null
@@ -0,0 +1,72 @@
+From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:40:03 +0200
+Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
+ 2 files changed, 18 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -31,6 +31,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include <pci_ath9k_fixup.h>
+ #include "board_common.h"
+@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++      int i;
+ #if CONFIG_OF
+       if (of_have_populated_dt()) {
+@@ -241,6 +243,10 @@ int __init board_register_devices(void)
+                                       board.ephy_reset_gpio_flags);
+       }
++      /* register any fixups */
++      for (i = 0; i < board.has_caldata; i++)
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++
+       return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -9,6 +9,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_fallback_sprom.h>
++#include <pci_ath9k_fixup.h>
+ /*
+  * flash mapping
+@@ -16,6 +17,11 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
++struct ath9k_caldata {
++      unsigned int    slot;
++      u32             caldata_offset;
++};
++
+ /*
+  * board definition
+  */
+@@ -33,6 +39,10 @@ struct board_info {
+       unsigned int    has_ehci0:1;
+       unsigned int    has_usbd:1;
+       unsigned int    use_fallback_sprom:1;
++      unsigned int    has_caldata:2;
++
++      /* wifi calibration data config */
++      struct ath9k_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
new file mode 100644 (file)
index 0000000..9fbfae4
--- /dev/null
@@ -0,0 +1,31 @@
+From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 13 Jan 2014 12:12:30 +0100
+Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void)
+               return -ENODEV;
+       }
+ }
++
++int bcm63xx_flash_get_type(void)
++{
++      return flash_type;
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
+ int __init bcm63xx_flash_register(void);
++int bcm63xx_flash_get_type(void);
++
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
new file mode 100644 (file)
index 0000000..c9d2ee1
--- /dev/null
@@ -0,0 +1,237 @@
+From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:36:11 +0200
+Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    3 +-
+ arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
+ 3 files changed, 199 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+-                 sprom.o
++                 pci-ath9k-fixup.o sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -0,0 +1,200 @@
++/*
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  Based on
++ *
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/ath9k_platform.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_flash.h>
++#include <pci_ath9k_fixup.h>
++
++#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
++
++struct ath9k_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct ath9k_platform_data pdata;
++};
++
++static int ath9k_num_fixups;
++static struct ath9k_fixup ath9k_fixups[2] = {
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++};
++
++static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
++{
++      u32 addr;
++
++      if (BCMCPU_IS_6328()) {
++              addr = 0x18000000;
++      } else {
++              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
++              addr &= MPI_CSBASE_BASE_MASK;
++      }
++
++      switch (bcm63xx_flash_get_type()) {
++      case BCM63XX_FLASH_TYPE_PARALLEL:
++              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++              return eeprom;
++      case BCM63XX_FLASH_TYPE_SERIAL:
++              /* the first megabyte is memory mapped */
++              if (offset < 0x100000) {
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      return eeprom;
++              }
++
++              if (BCMCPU_IS_6328()) {
++                      /* we can change the memory mapped megabyte */
++                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      bcm_hsspi_writel(0, 0x18);
++                      return eeprom;
++              }
++              /* can't do anything here without talking to the SPI controller. */
++      case BCM63XX_FLASH_TYPE_NAND:
++      default:
++              return NULL;
++      }
++}
++
++static void ath9k_pci_fixup(struct pci_dev *dev)
++{
++      void __iomem *mem;
++      struct ath9k_platform_data *pdata = NULL;
++      struct pci_dev *bridge = pci_upstream_bridge(dev);
++      u16 *cal_data = NULL;
++      u16 cmd;
++      u32 bar0;
++      u32 val;
++      unsigned i;
++
++      for (i = 0; i < ath9k_num_fixups; i++) {
++              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              cal_data = ath9k_fixups[i].pdata.eeprom_data;
++              pdata = &ath9k_fixups[i].pdata;
++              break;
++      }
++
++      if (cal_data == NULL)
++              return;
++
++      if (*cal_data != 0xa55a) {
++              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++              return;
++      }
++
++      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++      switch (bcm63xx_get_cpu_id()) {
++      case BCM6328_CPU_ID:
++              val = BCM_PCIE_MEM_BASE_PA_6328;
++              break;
++      case BCM6348_CPU_ID:
++      case BCM6358_CPU_ID:
++      case BCM6368_CPU_ID:
++              val = BCM_PCI_MEM_BASE_PA;
++              break;
++      default:
++              BUG();
++      }
++
++      mem = ioremap(val, 0x10000);
++      if (!mem) {
++              pr_err("pci %s: ioremap error\n", pci_name(dev));
++              return;
++      }
++
++      if (bridge)
++              pci_enable_device(bridge);
++
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      /* set offset to first reg address */
++      cal_data += 3;
++      while(*cal_data != 0xffff) {
++              u32 reg;
++              reg = *cal_data++;
++              val = *cal_data++;
++              val |= (*cal_data++) << 16;
++
++              writel(val, mem + reg);
++              udelay(100);
++      }
++
++      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++      dev->vendor = val & 0xffff;
++      dev->device = (val >> 16) & 0xffff;
++
++      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++      dev->revision = val & 0xff;
++      dev->class = val >> 8; /* upper 3 bytes */
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++      if (bridge)
++              pci_disable_device(bridge);
++
++      iounmap(mem);
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
++
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++{
++      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].slot = slot;
++
++      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
++              return;
++
++      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
++      ath9k_num_fixups++;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -0,0 +1,7 @@
++#ifndef _PCI_ATH9K_FIXUP
++#define _PCI_ATH9K_FIXUP
++
++
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++
++#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch
new file mode 100644 (file)
index 0000000..2076879
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -2,6 +2,7 @@
+ #define _PCI_ATH9K_FIXUP
+-void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -20,6 +20,7 @@
+ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
++      unsigned int    endian_check:1;
+ };
+ /*
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+-void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
++      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -245,7 +245,8 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
++                      board.caldata[i].endian_check);
+       return 0;
+ }
diff --git a/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch
new file mode 100644 (file)
index 0000000..bb111dc
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -246,7 +246,7 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check);
++                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+ void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check)
++      unsigned endian_check, int led_pin, bool led_active_high)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
+       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
++      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
++      ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -21,6 +21,8 @@ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
+       unsigned int    endian_check:1;
++      int             led_pin;
++      bool            led_active_high;
+ };
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -3,6 +3,6 @@
+ void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check) __init;
++      unsigned endian_check, int led_pin, bool led_active_high) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
new file mode 100644 (file)
index 0000000..cc980a1
--- /dev/null
@@ -0,0 +1,185 @@
+From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 7 Jan 2013 17:45:39 +0100
+Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
+ arch/mips/bcm63xx/dev-flash.c                      |    2 +-
+ arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
+ .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
+ 7 files changed, 104 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+-                 pci-ath9k-fixup.o sprom.o
++                 pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -32,6 +32,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ #include "board_common.h"
+@@ -244,9 +245,19 @@ int __init board_register_devices(void)
+       }
+       /* register any fixups */
+-      for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
++      for (i = 0; i < board.has_caldata; i++) {
++              switch (board.caldata[i].vendor) {
++              case PCI_VENDOR_ID_ATHEROS:
++                      pci_enable_ath9k_fixup(board.caldata[i].slot,
++                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
++                              board.caldata[i].led_pin, board.caldata[i].led_active_high);
++                      break;
++              case PCI_VENDOR_ID_RALINK:
++                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
++                              board.caldata[i].eeprom);
++                      break;
++              }
++      }
+       return 0;
+ }
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
+@@ -0,0 +1,72 @@
++/*
++ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
++ *
++ *  Based on
++ *
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++#include <bcm63xx_nvram.h>
++#include <pci_rt2x00_fixup.h>
++
++struct rt2x00_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct rt2x00_platform_data pdata;
++};
++
++static int rt2x00_num_fixups;
++static struct rt2x00_fixup rt2x00_fixups[2] = {
++      {
++              .slot = 255,
++      },
++      {
++              .slot = 255,
++      },
++};
++
++static void rt2x00_pci_fixup(struct pci_dev *dev)
++{
++      unsigned i;
++      struct rt2x00_platform_data *pdata = NULL;
++
++      for (i = 0; i < rt2x00_num_fixups; i++) {
++              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              pdata = &rt2x00_fixups[i].pdata;
++              break;
++      }
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
++
++void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
++{
++      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
++      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++
++      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
++      rt2x00_num_fixups++;
++}
++
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -10,6 +10,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_fallback_sprom.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ /*
+  * flash mapping
+@@ -17,12 +18,16 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
+-struct ath9k_caldata {
++struct bcm63xx_caldata {
++      unsigned int    vendor;
+       unsigned int    slot;
+       u32             caldata_offset;
++      /* Atheros */
+       unsigned int    endian_check:1;
+       int             led_pin;
+       bool            led_active_high;
++      /* Ralink */
++      char*           eeprom;
+ };
+ /*
+@@ -45,7 +50,7 @@ struct board_info {
+       unsigned int    has_caldata:2;
+       /* wifi calibration data config */
+-      struct ath9k_caldata caldata[2];
++      struct bcm63xx_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+@@ -0,0 +1,9 @@
++#ifndef _PCI_RT2X00_FIXUP
++#define _PCI_RT2X00_FIXUP
++
++#define PCI_VENDOR_ID_RALINK 0x1814
++
++void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
++
++#endif /* _PCI_RT2X00_FIXUP */
++
diff --git a/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch
new file mode 100644 (file)
index 0000000..58f1b13
--- /dev/null
@@ -0,0 +1,169 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -332,6 +332,9 @@ struct bcm_enet_priv {
+       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+       int sw_port_link[ENETSW_MAX_PORT];
++      /* platform device for associated switch */
++      struct platform_device *b53_device;
++
+       /* used to poll switch port state */
+       struct timer_list swphy_poll;
+       spinlock_t enetsw_mdio_lock;
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/platform_data/b53.h>
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -1937,7 +1938,8 @@ static int bcm_enet_remove(struct platfo
+       return 0;
+ }
+-struct platform_driver bcm63xx_enet_driver = {
++
++static struct platform_driver bcm63xx_enet_driver = {
+       .probe  = bcm_enet_probe,
+       .remove = bcm_enet_remove,
+       .driver = {
+@@ -1946,6 +1948,42 @@ struct platform_driver bcm63xx_enet_driv
+       },
+ };
++struct b53_platform_data bcm63xx_b53_pdata = {
++      .chip_id = 0x6300,
++      .big_endian = 1,
++};
++
++struct platform_device bcm63xx_b53_dev = {
++      .name           = "b53-switch",
++      .id             = -1,
++      .dev            = {
++              .platform_data = &bcm63xx_b53_pdata,
++      },
++};
++
++static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
++{
++      int ret;
++
++      bcm63xx_b53_pdata.regs = priv->base;
++      bcm63xx_b53_pdata.enabled_ports = port_mask;
++      bcm63xx_b53_pdata.alias = priv->net_dev->name;
++
++      ret = platform_device_register(&bcm63xx_b53_dev);
++      if (!ret)
++              priv->b53_device = &bcm63xx_b53_dev;
++
++      return ret;
++}
++
++static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
++{
++      if (priv->b53_device)
++              platform_device_unregister(&bcm63xx_b53_dev);
++
++      priv->b53_device = NULL;
++}
++
+ /*
+  * switch mii access callbacks
+  */
+@@ -2204,29 +2242,6 @@ static int bcm_enetsw_open(struct net_de
+               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+       }
+-      /* reset mib */
+-      val = enetsw_readb(priv, ENETSW_GMCR_REG);
+-      val |= ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-      val &= ~ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-
+-      /* force CPU port state */
+-      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
+-      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
+-      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
+-
+-      /* enable switch forward engine */
+-      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
+-      val |= ENETSW_SWMODE_FWD_EN_MASK;
+-      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
+-
+-      /* enable jumbo on all ports */
+-      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
+-      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
+-
+       /* initialize flow control buffer allocation */
+       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
+@@ -2685,6 +2700,9 @@ static int bcm_enetsw_probe(struct platf
+       struct bcm63xx_enetsw_platform_data *pd;
+       struct resource *res_mem;
+       int ret, irq_rx, irq_tx;
++      unsigned i, num_ports = 0;
++      u16 port_mask = BIT(8);
++      u8 val;
+       if (!bcm_enet_shared_base[0])
+               return -EPROBE_DEFER;
+@@ -2767,6 +2785,43 @@ static int bcm_enetsw_probe(struct platf
+       priv->pdev = pdev;
+       priv->net_dev = dev;
++      /* reset mib */
++      val = enetsw_readb(priv, ENETSW_GMCR_REG);
++      val |= ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++      val &= ~ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++
++      /* force CPU port state */
++      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
++      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
++      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
++
++      /* enable switch forward engine */
++      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
++      val |= ENETSW_SWMODE_FWD_EN_MASK;
++      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
++
++      /* enable jumbo on all ports */
++      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
++      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
++
++      for (i = 0; i < priv->num_ports; i++) {
++              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
++
++              if (!port->used)
++                      continue;
++
++              num_ports++;
++              port_mask |= BIT(i);
++      }
++
++      /* only register if there is more than one external port */
++      if (num_ports > 1)
++              bcmenet_switch_register(priv, port_mask);
++
+       return 0;
+ out_disable_clk:
+@@ -2788,6 +2843,9 @@ static int bcm_enetsw_remove(struct plat
+       priv = netdev_priv(dev);
+       unregister_netdev(dev);
++      /* remove switch */
++      bcmenet_switch_unregister(priv);
++
+       clk_disable_unprepare(priv->mac_clk);
+       free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch
new file mode 100644 (file)
index 0000000..6235c8c
--- /dev/null
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2744,9 +2744,9 @@ static int bcm_enetsw_probe(struct platf
+       if (ret)
+               goto out;
+-      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
+-      if (IS_ERR(priv->base)) {
+-              ret = PTR_ERR(priv->base);
++      priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
++      if (priv->base == NULL) {
++              ret = -ENOMEM;
+               goto out;
+       }
diff --git a/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch b/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch
new file mode 100644 (file)
index 0000000..4b206a2
--- /dev/null
@@ -0,0 +1,119 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -77,6 +77,8 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -90,6 +92,8 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -138,6 +142,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -162,6 +168,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -186,6 +194,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -208,6 +218,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -231,6 +243,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -252,6 +266,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -271,6 +287,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -298,6 +316,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -323,6 +343,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -348,6 +370,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -371,6 +395,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
diff --git a/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch b/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch
new file mode 100644 (file)
index 0000000..dd63183
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -46,7 +46,7 @@ static struct board_info __initdata boar
+       .ephy_reset_gpio                = 36,
+       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_3368 */
+ /*
+  * known 6328 boards
+@@ -65,7 +65,7 @@ static struct board_info __initdata boar
+               .port_no                = 0,
+       },
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+  * known 6338 boards
+@@ -98,7 +98,7 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+  * known 6345 boards
+@@ -108,7 +108,7 @@ static struct board_info __initdata boar
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+  * known 6348 boards
+@@ -295,7 +295,7 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+  * known 6358 boards
+@@ -403,7 +403,7 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+  * all boards
diff --git a/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch b/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch
new file mode 100644 (file)
index 0000000..456b2a4
--- /dev/null
@@ -0,0 +1,40 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -295,6 +295,21 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++      .name                           = "D-4P-W",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -431,6 +446,7 @@ static const struct board_info __initcon
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
++      &board_96348_D4PW,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch b/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch
new file mode 100644 (file)
index 0000000..41c8a7e
--- /dev/null
@@ -0,0 +1,81 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -418,6 +418,60 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++      .name                           = "NB4-SER-r0",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++      .name                           = "NB4-FXC-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -454,6 +508,8 @@ static const struct board_info __initcon
+       &board_96358vw2,
+       &board_AGPFS0,
+       &board_DWVS0,
++      &board_nb4_ser_r0,
++      &board_nb4_fxc_r1,
+ #endif
+ };
+@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
++      { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
++      { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch b/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch
new file mode 100644 (file)
index 0000000..69cc716
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -98,6 +98,20 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct board_info __initdata board_96338w2_e7t = {
++      .name                           = "96338W2_E7T",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+@@ -487,6 +501,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+       &board_96338w,
++      &board_96338w2_e7t,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
+       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++      { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch b/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch
new file mode 100644 (file)
index 0000000..9e3c4e0
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -385,6 +385,25 @@ static struct board_info __initdata boar
+       .num_usbh_ports                 = 2,
+ };
++static struct board_info __initdata board_CPVA642 = {
++      .name                           = "CPVA642",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+@@ -522,6 +541,7 @@ static const struct board_info __initcon
+       &board_96358vw,
+       &board_96358vw2,
+       &board_AGPFS0,
++      &board_CPVA642,
+       &board_DWVS0,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
+       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
++      { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch b/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch
new file mode 100644 (file)
index 0000000..e78832e
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -452,6 +452,22 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++      .name                           = "AW4139",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
+ static struct board_info __initdata board_nb4_ser_r0 = {
+       .name                           = "NB4-SER-r0",
+       .expected_cpu_id                = 0x6358,
+@@ -543,6 +559,7 @@ static const struct board_info __initcon
+       &board_AGPFS0,
+       &board_CPVA642,
+       &board_DWVS0,
++      &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+ #endif
+@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch b/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch
new file mode 100644 (file)
index 0000000..f5ca73d
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -324,6 +324,36 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct sprom_fixup __initdata spw500v_fixups[] = {
++      { .offset = 46, .value = 0x3046 },
++      { .offset = 47, .value = 0x15a7 },
++      { .offset = 48, .value = 0xfa89 },
++      { .offset = 49, .value = 0xfe79 },
++      { .offset = 57, .value = 0x6a49 },
++};
++
++static struct board_info __initdata board_spw500v = {
++      .name                           = "SPW500V",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4318,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++              .board_fixups           = spw500v_fixups,
++              .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -551,6 +581,7 @@ static const struct board_info __initcon
+       &board_96348gw_a,
+       &board_rta1025w_16,
+       &board_96348_D4PW,
++      &board_spw500v,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch b/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch
new file mode 100644 (file)
index 0000000..77948d1
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -217,6 +217,48 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++static struct board_info __initdata board_gw6200 = {
++      .name                           = "GW6200",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++};
++
++static struct board_info __initdata board_gw6000 = {
++      .name                           = "GW6000",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+@@ -574,6 +616,8 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+       &board_96348gw,
++      &board_gw6000,
++      &board_gw6200,
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
+@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
++      { .compatible = "tecom,gw6000", .data = &board_gw6000, },
++      { .compatible = "tecom,gw6200", .data = &board_gw6200, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch b/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch
new file mode 100644 (file)
index 0000000..3a88e01
--- /dev/null
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -396,6 +396,31 @@ static struct board_info __initdata boar
+               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
+       },
+ };
++
++static struct board_info __initdata board_96348sv = {
++      .name                           = "MAGIC",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              /* it has BP_ENET_EXTERNAL_PHY */
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++      .has_ehci0                      = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -626,6 +651,7 @@ static const struct board_info __initcon
+       &board_rta1025w_16,
+       &board_96348_D4PW,
+       &board_spw500v,
++      &board_96348sv,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
++      { .compatible = "telsey,magic", .data = &board_96348sv, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch b/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch
new file mode 100644 (file)
index 0000000..e6e94f7
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -618,6 +618,32 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+       .num_usbh_ports                 = 2,
+ };
++
++static struct board_info __initdata board_HW553 = {
++      .name                           = "HW553",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -663,6 +689,7 @@ static const struct board_info __initcon
+       &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
++      &board_HW553,
+ #endif
+ };
+@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch b/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch
new file mode 100644 (file)
index 0000000..cfe5555
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -112,6 +112,20 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct board_info __initdata board_rta1320_16m = {
++      .name                           = "RTA1320_16M",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+@@ -660,6 +674,7 @@ static const struct board_info __initcon
+       &board_96338gw,
+       &board_96338w,
+       &board_96338w2_e7t,
++      &board_rta1320_16m,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
+       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++      { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
+       { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch b/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch
new file mode 100644 (file)
index 0000000..69432c9
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -658,6 +658,20 @@ static struct board_info __initdata boar
+               .pci_dev                        = 1,
+       },
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++      .name                   = "96358-502V",
++      .expected_cpu_id        = 0x6358,
++
++      .has_enet0              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -705,6 +719,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_HW553,
++      &board_spw303v,
+ #endif
+ };
+@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
+       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
++      { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch b/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch
new file mode 100644 (file)
index 0000000..c77eb00
--- /dev/null
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -435,6 +435,26 @@ static struct board_info __initdata boar
+       .has_pccard                     = 1,
+       .has_ehci0                      = 1,
+ };
++
++static struct board_info __initdata board_V2500V_BB = {
++      .name                           = "V2500V_BB",
++        .expected_cpu_id                = 0x6348,
++
++        .has_enet0                      = 1,
++        .has_enet1                      = 1,
++        .has_pci                        = 1,
++
++        .enet0 = {
++                .has_phy                = 1,
++                .use_internal_phy       = 1,
++        },
++        .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++                .force_speed_100        = 1,
++                .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -707,6 +727,7 @@ static const struct board_info __initcon
+       &board_96348_D4PW,
+       &board_spw500v,
+       &board_96348sv,
++      &board_V2500V_BB,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
+               val &= MPI_CSBASE_BASE_MASK;
+       }
+       boot_addr = (u8 *)KSEG1ADDR(val);
++      pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
++
++      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
++      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
++      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
++      /* Do an early check of CFE and then select bank 0 */
++
++      if (boot_addr == (u8 *)0xbf800000) {
++              u8 *tmp_boot_addr = (u8*)0xbfc00000;
++
++              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
++              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
++                      pr_info("V2500V: nvram bank 0\n");
++                      boot_addr = tmp_boot_addr;
++              }
++      }
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -21,6 +21,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+ #include <bcm63xx_regs.h>
+@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
+                       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+                       val &= MPI_CSBASE_BASE_MASK;
++                      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++                      /* Loading from CFE always uses Bank 0 */
++                      if (!strcmp(board_get_name(), "V2500V_BB")) {
++                              pr_info("V2500V: Start in Bank 0\n");
++                              val = val + 0x400000; // Select Bank 0 start address
++                      }
++
+                       mtd_resources[0].start = val;
+                       mtd_resources[0].end = 0x1FFFFFFF;
+               }
diff --git a/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch b/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..4c14ea4
--- /dev/null
@@ -0,0 +1,43 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -208,6 +208,24 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -728,6 +746,7 @@ static const struct board_info __initcon
+       &board_spw500v,
+       &board_96348sv,
+       &board_V2500V_BB,
++      &board_V2110,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
new file mode 100644 (file)
index 0000000..f98e19d
--- /dev/null
@@ -0,0 +1,215 @@
+From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:55:52 +0100
+Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+
+---
+ arch/mips/bcm63xx/boards/Kconfig         |    6 +
+ arch/mips/bcm63xx/boards/Makefile        |    1 +
+ arch/mips/bcm63xx/boards/board_common.c  |    2 +-
+ arch/mips/bcm63xx/boards/board_common.h  |    6 +
+ arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
+ 5 files changed, 229 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -13,4 +13,10 @@ config BOARD_BCM963XX
+       default y
+        help
++config BOARD_LIVEBOX
++      bool "Inventel Livebox(es) boards"
++      select SSB
++      help
++        Inventel Livebox boards using the RedBoot bootloader.
++
+ endmenu
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1,2 +1,3 @@
+ obj-y                                 += board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -54,7 +54,7 @@ void __init board_prom_init(void)
+       if (fw_arg3 == CFE_EPTSEAL)
+               board_bcm963xx_init();
+       else
+-              panic("unsupported bootloader detected");
++              board_livebox_init();
+ }
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -24,4 +24,10 @@ static inline void board_of_device_prese
+ }
+ #endif
++#if defined(CONFIG_BOARD_LIVEBOX)
++void board_livebox_init(void);
++#else
++static inline void board_livebox_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,155 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/input.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_flash.h>
++#include <board_bcm963xx.h>
++
++#include "board_common.h"
++
++#define PFX   "board_livebox: "
++
++static unsigned int mac_addr_used = 0;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox_blue5g = {
++      .name                           = "Livebox-blue-5g",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++                .has_phy              = 1,
++                .phy_id               = 31,
++      },
++
++      .ephy_reset_gpio                = 6,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++      &board_livebox_blue5g
++#endif
++};
++
++static struct of_device_id const livebox_boards_dt[] = {
++      { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
++      { }
++};
++
++/*
++ * register & return a new board mac address
++ */
++static int livebox_get_mac_address(u8 *mac)
++{
++      u8 *p;
++      int count;
++
++      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++      p = mac + ETH_ALEN - 1;
++      count = mac_addr_used;
++
++      while (count--) {
++              do {
++                      (*p)++;
++                      if (*p != 0)
++                              break;
++                      p--;
++              } while (p != mac);
++      }
++
++      if (p == mac) {
++              printk(KERN_ERR PFX "unable to fetch mac address\n");
++              return -ENODEV;
++      }
++        mac_addr_used++;
++
++      return 0;
++}
++
++/*
++ * early init callback
++ */
++#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
++#define LIVEBOX_BOOT_ADDR             0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9           0x90
++
++void __init board_livebox_init(void)
++{
++      u32 val;
++      u8 hw_version;
++      const struct board_info *board;
++      const struct of_device_id *board_match;
++
++      /* find board by compat */
++      board_match = bcm63xx_match_board(livebox_boards_dt);
++      if (board_match) {
++              board = board_match->data;
++      } else {
++              /* Get hardware version */
++              val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++              val &= ~LIVEBOX_GPIO_DETECT_MASK;
++              bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++              hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
++              hw_version &= LIVEBOX_GPIO_DETECT_MASK;
++
++              switch (hw_version) {
++              case LIVEBOX_HW_BLUE5G_9:
++                      printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++                      board = bcm963xx_boards[0];
++                      break;
++              default:
++                      printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
++                             hw_version);
++                      /* use default livebox configuration */
++                      board = bcm963xx_boards[0];
++                      break;
++              }
++      }
++
++      /* use default livebox configuration */
++      board_early_setup(board, livebox_get_mac_address);
++
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++      if (val != LIVEBOX_BOOT_ADDR) {
++              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++                      val, LIVEBOX_BOOT_ADDR);
++              bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
++      }
++}
diff --git a/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch b/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch
new file mode 100644 (file)
index 0000000..acb533d
--- /dev/null
@@ -0,0 +1,53 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -226,6 +226,33 @@ static struct board_info __initdata boar
+ };
++static struct board_info __initdata board_ct536_ct5621 = {
++      .name                           = "CT536_CT5621",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 0,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -747,6 +774,7 @@ static const struct board_info __initcon
+       &board_96348sv,
+       &board_V2500V_BB,
+       &board_V2110,
++      &board_ct536_ct5621,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
+       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
++      { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
++      { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch
new file mode 100644 (file)
index 0000000..9ccb29b
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -626,6 +626,7 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
+ };
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch b/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch
new file mode 100644 (file)
index 0000000..a6de00d
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -253,6 +253,30 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96348A_122 = {
++      .name                           = "96348A-122",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -776,6 +800,7 @@ static const struct board_info __initcon
+       &board_V2500V_BB,
+       &board_V2110,
+       &board_ct536_ct5621,
++      &board_96348A_122,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
++      { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
+       { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch b/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch
new file mode 100644 (file)
index 0000000..25e7f9f
--- /dev/null
@@ -0,0 +1,52 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -225,6 +225,33 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_CPVA502plus = {
++      .name                           = "CPVA502+",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++      },
++
++      .ephy_reset_gpio                = 4,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
+ static struct board_info __initdata board_ct536_ct5621 = {
+       .name                           = "CT536_CT5621",
+@@ -801,6 +828,7 @@ static const struct board_info __initcon
+       &board_V2110,
+       &board_ct536_ct5621,
+       &board_96348A_122,
++      &board_CPVA502plus,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
++      { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
+       { .compatible = "telsey,magic", .data = &board_96348sv, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
new file mode 100644 (file)
index 0000000..17087b3
--- /dev/null
@@ -0,0 +1,118 @@
+From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Wed, 20 Jan 2010 16:21:30 +0100
+Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
+ 2 files changed, 97 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -792,6 +792,58 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
++ * known 6368 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_96368mvwg = {
++      .name                           = "96368MVWG",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port1",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0x12,
++                              .name   = "port0",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 0x11,
++                              .name   = "port3",
++                      },
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
++#endif /* CONFIG_BCM63XX_CPU_6368 */
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -843,6 +895,10 @@ static const struct board_info __initcon
+       &board_HW553,
+       &board_spw303v,
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_6368
++      &board_96368mvwg,
++#endif
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ #endif
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
+               bcm63xx_pci_enabled = 1;
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G2_PCI;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCI_REQ1 |
++                              GPIO_MODE_6368_PCI_GNT1 |
++                              GPIO_MODE_6368_PCI_INTB |
++                              GPIO_MODE_6368_PCI_REQ0 |
++                              GPIO_MODE_6368_PCI_GNT0;
+       }
+ #endif
+       if (board.has_pccard) {
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
++                              GPIO_MODE_6368_PCMCIA_CD2 |
++                              GPIO_MODE_6368_PCMCIA_VS1 |
++                              GPIO_MODE_6368_PCMCIA_VS2;
+       }
+       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
new file mode 100644 (file)
index 0000000..03bda96
--- /dev/null
@@ -0,0 +1,73 @@
+From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 4 Nov 2011 12:33:48 +0100
+Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
+ 1 files changed, 67 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -841,6 +841,45 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
+ };
++
++static struct board_info __initdata board_96368mvngr = {
++      .name                           = "96368MVNgr",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
+@@ -898,6 +937,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
++      &board_96368mvngr,
+ #endif
+ };
+@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
new file mode 100644 (file)
index 0000000..e482b20
--- /dev/null
@@ -0,0 +1,45 @@
+From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 10:52:25 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
+ 1 files changed, 77 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -64,6 +64,33 @@ static struct board_info __initdata boar
+               .use_fullspeed          = 0,
+               .port_no                = 0,
+       },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
+ };
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
new file mode 100644 (file)
index 0000000..522d999
--- /dev/null
@@ -0,0 +1,68 @@
+From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 11:01:12 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
+ 1 files changed, 71 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -92,6 +92,40 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_963281TAN = {
++      .name                           = "963281TAN",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -918,6 +952,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_963281TAN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch b/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch
new file mode 100644 (file)
index 0000000..b91fff0
--- /dev/null
@@ -0,0 +1,80 @@
+From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 30 Apr 2012 09:10:51 +0200
+Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
+ DSL-274xB rev F1
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
+ 1 files changed, 104 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -126,6 +126,51 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++      .name                           = "AW4339U",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor         = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset = 0x7d1000,
++                      .slot           = 0,
++                      .led_pin        = -1,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 1",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -953,6 +998,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch b/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch
new file mode 100644 (file)
index 0000000..3a27db8
--- /dev/null
@@ -0,0 +1,43 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -568,6 +568,24 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++/* NetGear DG834G v4 */
++static struct board_info __initdata board_96348W3 = {
++      .name                           = "96348W3",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++};
++
+ static struct board_info __initdata board_96348_D4PW = {
+       .name                           = "D-4P-W",
+       .expected_cpu_id                = 0x6348,
+@@ -1028,6 +1046,7 @@ static const struct board_info __initcon
+       &board_ct536_ct5621,
+       &board_96348A_122,
+       &board_CPVA502plus,
++      &board_96348W3,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
++      { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch b/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch
new file mode 100644 (file)
index 0000000..0cfcc17
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -874,6 +874,30 @@ static struct board_info __initdata boar
+       .num_usbh_ports                 = 2,
+ };
++static struct board_info __initdata board_ct6373_1 = {
++      .name                           = "CT6373-1",
++      .expected_cpu_id        = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -1058,6 +1082,7 @@ static const struct board_info __initcon
+       &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
++      &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
+ #endif
+@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch
new file mode 100644 (file)
index 0000000..45e8717
--- /dev/null
@@ -0,0 +1,52 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -937,6 +937,33 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++      .name                   = "DVAG3810BN",
++      .expected_cpu_id        = 0x6358,
++
++      .has_enet0              = 1,
++      .has_enet1              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0              = 1,
++      .has_pccard             = 1,
++      .has_ehci0              = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -1085,6 +1112,7 @@ static const struct board_info __initcon
+       &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
++      &board_DVAG3810BN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch b/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch
new file mode 100644 (file)
index 0000000..b4de7cb
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -966,6 +966,32 @@ static struct board_info __initdata boar
+ };
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
++#ifdef CONFIG_BCM63XX_CPU_6362
++static struct board_info __initdata board_nb6 = {
++      .name                           = "NB6",
++      .expected_cpu_id                = 0x6362,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name   = "RGMII",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_6362 */
++
+ /*
+  * known 6368 boards
+  */
+@@ -1115,6 +1141,10 @@ static const struct board_info __initcon
+       &board_DVAG3810BN,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      &board_nb6,
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
+@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch b/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch
new file mode 100644 (file)
index 0000000..9e42c40
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -501,6 +501,22 @@ static struct board_info __initdata boar
+       .has_ehci0                      = 1,
+ };
++static struct board_info __initdata board_FAST2604 = {
++      .name                                           = "F@ST2604",
++      .expected_cpu_id                        = 0x6348,
++
++      .has_pci                                        = 1,
++      .has_ohci0                                      = 1,
++
++      .has_enet1                                      = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
+@@ -1112,6 +1128,7 @@ static const struct board_info __initcon
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
++      &board_FAST2604,
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
+@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch b/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch
new file mode 100644 (file)
index 0000000..0cecd9c
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -127,6 +127,49 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_A4001N1 = {
++      .name                                   = "963281T_TEF",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ static struct board_info __initdata board_dsl_274xb_f1 = {
+       .name                           = "AW4339U",
+       .expected_cpu_id                = 0x6328,
+@@ -1109,6 +1152,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_A4001N1,
+       &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch b/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch
new file mode 100644 (file)
index 0000000..f2af2c5
--- /dev/null
@@ -0,0 +1,97 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -93,6 +93,78 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5387un_fixups[] = {
++      { .offset = 2, .value = 0x05bb },
++      { .offset = 65, .value = 0x1204 },
++      { .offset = 78, .value = 0x0303 },
++      { .offset = 79, .value = 0x0202 },
++      { .offset = 80, .value = 0xff02 },
++      { .offset = 87, .value = 0x0315 },
++      { .offset = 88, .value = 0x0315 },
++      { .offset = 96, .value = 0x2048 },
++      { .offset = 97, .value = 0xff11 },
++      { .offset = 98, .value = 0x1567 },
++      { .offset = 99, .value = 0xfb24 },
++      { .offset = 100, .value = 0x3e3c },
++      { .offset = 101, .value = 0x4038 },
++      { .offset = 102, .value = 0xfe7f },
++      { .offset = 103, .value = 0x1279 },
++      { .offset = 112, .value = 0x2048 },
++      { .offset = 113, .value = 0xff03 },
++      { .offset = 114, .value = 0x154c },
++      { .offset = 115, .value = 0xfb27 },
++      { .offset = 116, .value = 0x3e3c },
++      { .offset = 117, .value = 0x4038 },
++      { .offset = 118, .value = 0xfe87 },
++      { .offset = 119, .value = 0x1233 },
++      { .offset = 203, .value = 0x2226 },
++};
++
++static struct board_info __initdata board_AR5387un = {
++      .name                                   = "96328A-1441N1",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5387un_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5387un_fixups),
++      },
++};
++
+ static struct board_info __initdata board_963281TAN = {
+       .name                           = "963281TAN",
+       .expected_cpu_id                = 0x6328,
+@@ -1151,6 +1223,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AR5387un,
+       &board_963281TAN,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch b/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch
new file mode 100644 (file)
index 0000000..dc8efed
--- /dev/null
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -93,6 +93,60 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5381u_fixups[] = {
++      { .offset = 97, .value = 0xfee5 },
++      { .offset = 98, .value = 0x157c },
++      { .offset = 99, .value = 0xfae7 },
++      { .offset = 113, .value = 0xfefa },
++      { .offset = 114, .value = 0x15d6 },
++      { .offset = 115, .value = 0xfaf8 },
++};
++
++static struct board_info __initdata board_AR5381u = {
++      .name                                   = "96328A-1241N",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5381u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5387un_fixups[] = {
+       { .offset = 2, .value = 0x05bb },
+       { .offset = 65, .value = 0x1204 },
+@@ -1223,6 +1277,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+       &board_A4001N1,
+@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch b/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch
new file mode 100644 (file)
index 0000000..d56df55
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -411,6 +411,20 @@ static struct board_info __initdata boar
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+ };
++
++static struct board_info __initdata board_rta770bw = {
++      .name                           = "RTA770BW",
++      .expected_cpu_id                = 0x6345,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+@@ -1291,6 +1305,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
++      &board_rta770bw,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
++      { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch b/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch
new file mode 100644 (file)
index 0000000..cf55255
--- /dev/null
@@ -0,0 +1,123 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,6 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
++#include <linux/pci_ids.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HW556_C = {
++      .name                                   = "HW556_C",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0xeffe00,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++static struct board_info __initdata board_HW556_A = {
++      .name                                   = "HW556_A",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xf7e000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++static struct board_info __initdata board_HW556_B = {
++      .name                                   = "HW556_B",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xefe000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++
+  /* T-Home Speedport W 303V Typ B */
+ static struct board_info __initdata board_spw303v = {
+       .name                   = "96358-502V",
+@@ -1341,6 +1428,9 @@ static const struct board_info __initcon
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
+       &board_HW553,
++      &board_HW556_A,
++      &board_HW556_B,
++      &board_HW556_C,
+       &board_spw303v,
+       &board_DVAG3810BN,
+ #endif
+@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
++      { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
++      { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
++      { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch b/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch
new file mode 100644 (file)
index 0000000..c78e59e
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -426,6 +426,25 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+@@ -1393,6 +1412,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
+       { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
++      { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch b/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch
new file mode 100644 (file)
index 0000000..358e974
--- /dev/null
@@ -0,0 +1,74 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -341,6 +341,43 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_FAST2704V2 = {
++      .name                           = "F@ST2704V2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .has_usbd                       = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -1402,6 +1439,7 @@ static const struct board_info __initcon
+       &board_963281TAN,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
++      &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
++      { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch b/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch
new file mode 100644 (file)
index 0000000..ff04407
--- /dev/null
@@ -0,0 +1,66 @@
+From: Max Staudt <openwrt.max@enpas.org>
+Date: Wed, 15 Jan 2014 18:51:13 +0000
+Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26)
+
+Signed-off-by: Max Staudt <openwrt.max@enpas.org>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_fast2504n = {
++      .name                           = "F@ST2504n",
++      .expected_cpu_id                = 0x6362,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
+ /*
+@@ -1495,6 +1530,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       &board_nb6,
++      &board_fast2504n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
++      { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch b/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch
new file mode 100644 (file)
index 0000000..c9c532d
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -50,6 +50,55 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++      .name                           = "96318REF",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_6318 */
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -1467,6 +1516,9 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       &board_cvg834g,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      &board_96318ref,
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_AR5381u,
+@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
diff --git a/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch b/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch
new file mode 100644 (file)
index 0000000..f4ff4fd
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -96,6 +96,50 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96318ref_p300 = {
++      .name                           = "96318REF_P300",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -1518,6 +1562,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
++      &board_96318ref_p300,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++      { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
diff --git a/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch b/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch
new file mode 100644 (file)
index 0000000..d5af2f0
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++      .name                           = "963269BHR",
++      .expected_cpu_id                = 0x63268,
++
++      .has_pci                        = 1,
++
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_63268 */
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -1634,6 +1678,9 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963269bhr,
++#endif
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch b/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch
new file mode 100644 (file)
index 0000000..85521b4
--- /dev/null
@@ -0,0 +1,48 @@
+From: "mexit@o2.pl" <mexit@o2.pl>
+Date: Sun, 24 Nov 2013 21:33:38 +0000
+Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router
+
+Support for Asmax AR 1004g router
+
+Signed-off-by: Adrian Feliks <mexit@o2.pl>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -647,6 +647,21 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++      .name                           = "AR1004G",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
+ /* BT Voyager 2110 */
+ static struct board_info __initdata board_V2110 = {
+@@ -1649,6 +1664,7 @@ static const struct board_info __initcon
+       &board_96348A_122,
+       &board_CPVA502plus,
+       &board_96348W3,
++      &board_96348gw_10_AR1004G,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
++      { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch b/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch
new file mode 100644 (file)
index 0000000..355bdb2
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_vw6339gu = {
++      .name                           = "VW6339GU",
++      .expected_cpu_id                = 0x63268,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN2",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN4",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 7,
++                              .name   = "WAN",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ /*
+@@ -1696,6 +1741,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963269bhr,
++      &board_vw6339gu,
+ #endif
+ };
+@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
++      { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch b/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch
new file mode 100644 (file)
index 0000000..b8a2af4
--- /dev/null
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar
+  * known 63268/63269 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++      .name                           = "963268BU_P300",
++      .expected_cpu_id                = 0x63268,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 17,
++                              .name   = "FE1",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "GbE2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0,
++                              .name   = "GbE3",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "GbE1",
++                      },
++
++                      [6] = {
++                              .used   = 1,
++                              .phy_id = 24,
++                              .name   = "GbE4",
++                      },
++
++                      [7] = {
++                              .used   = 1,
++                              .phy_id = 25,
++                              .name   = "GbE5",
++                      },
++              },
++      },
++};
++
+ static struct board_info __initdata board_963269bhr = {
+       .name                           = "963269BHR",
+       .expected_cpu_id                = 0x63268,
+@@ -1740,6 +1798,7 @@ static const struct board_info __initcon
+       &board_96368mvngr,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963268bu_p300,
+       &board_963269bhr,
+       &board_vw6339gu,
+ #endif
+@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch b/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch
new file mode 100644 (file)
index 0000000..8b8b1ed
--- /dev/null
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -13,6 +13,8 @@
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/pci_ids.h>
++#include <linux/platform_data/b53.h>
++#include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
+ };
++
++static struct sprom_fixup __initdata wap5813n_fixups[] = {
++      { .offset = 97, .value = 0xfeed },
++      { .offset = 98, .value = 0x15d1 },
++      { .offset = 99, .value = 0xfb0d },
++      { .offset = 113, .value = 0xfef7 },
++      { .offset = 114, .value = 0x15f7 },
++      { .offset = 115, .value = 0xfb1a },
++};
++
++static struct board_info __initdata board_WAP5813n = {
++      .name                           = "96369R-1231N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [4] = {
++                              .used = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name = "RGMII",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = wap5813n_fixups,
++              .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
+@@ -1796,6 +1839,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963268bu_p300,
+@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++      { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch b/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch
new file mode 100644 (file)
index 0000000..36014ea
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct sprom_fixup __initdata vr3025u_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025u = {
++      .name                                   = "96368M-1541N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3025u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -1839,6 +1892,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_VR3025u,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch b/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch
new file mode 100644 (file)
index 0000000..a34b7a1
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vr3025un_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025un = {
++      .name                                   = "96368M-1341N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3025un_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -1893,6 +1946,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_VR3025u,
++      &board_VR3025un,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
++      { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch b/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch
new file mode 100644 (file)
index 0000000..9e06802
--- /dev/null
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3
+       { .offset = 115, .value = 0xfad9 },
+ };
++static struct board_info __initdata board_P870HW51A_V2 = {
++      .name                           = "P870HW-51a_v2",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+       .name                                   = "96368M-1541N",
+       .expected_cpu_id                = 0x6368,
+@@ -1945,6 +1987,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+       &board_WAP5813n,
+@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch b/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch
new file mode 100644 (file)
index 0000000..517df7d
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HW520 = {
++      .name                           = "HW6358GW_B",
++      .expected_cpu_id                = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet0                      = 1,
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -1971,6 +2001,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
++      &board_HW520,
+       &board_HW553,
+       &board_HW556_A,
+       &board_HW556_B,
+@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
++      { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
+       { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch b/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch
new file mode 100644 (file)
index 0000000..2dc61d5
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -349,6 +349,49 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_A4001N = {
++      .name                           = "96328dg2x2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ static struct board_info __initdata board_A4001N1 = {
+       .name                                   = "963281T_TEF",
+       .expected_cpu_id                        = 0x6328,
+@@ -1952,6 +1995,7 @@ static const struct board_info __initcon
+       &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
++      &board_A4001N,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+       &board_FAST2704V2,
+@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "adb,a4001n", .data = &board_A4001N, },
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch
new file mode 100644 (file)
index 0000000..b7e155d
--- /dev/null
@@ -0,0 +1,93 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -142,6 +142,74 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe9d },
++      { .offset = 98, .value = 0x1854 },
++      { .offset = 99, .value = 0xfa59 },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfe79 },
++      { .offset = 114, .value = 0x17f5 },
++      { .offset = 115, .value = 0xfa47 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 162, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 170, .value = 0x2222 },
++      { .offset = 171, .value = 0x5555 },
++      { .offset = 172, .value = 0x5555 },
++      { .offset = 173, .value = 0x4444 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x5555 },
++      { .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++      .name                           = "AW5200B",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = dsl2751b_e1_fixups,
++              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_dsl_2751b_d1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++      { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch b/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch
new file mode 100644 (file)
index 0000000..29263bc
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct board_info __initdata board_DGND3700v1_3800B = {
++      .name                           = "DGND3700v1_3800B",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used  = 1,
++                              .phy_id  = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name  = "RGMII",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2131,6 +2155,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_DGND3700v1_3800B,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch b/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch
new file mode 100644 (file)
index 0000000..9909994
--- /dev/null
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_homehub2a = {
++      .name                           = "HOMEHUB2A",
++      .expected_cpu_id                = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4322,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW520 = {
+       .name                           = "HW6358GW_B",
+       .expected_cpu_id                = 0x6358,
+@@ -2138,6 +2163,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
++      &board_homehub2a,
+       &board_HW520,
+       &board_HW553,
+       &board_HW556_A,
+@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
+       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
++      { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
diff --git a/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch b/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch
new file mode 100644 (file)
index 0000000..7b4d1fc
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HG655b = {
++      .name                           = "HW65x",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0x7c0000,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2182,6 +2228,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_HG655b,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch b/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch
new file mode 100644 (file)
index 0000000..fb84d8d
--- /dev/null
@@ -0,0 +1,64 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -210,6 +210,45 @@ static struct board_info __initdata boar
+               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
+       },
+ };
++
++static struct board_info __initdata board_FAST2704N = {
++      .name                           = "F@ST2704N",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -2153,6 +2192,7 @@ static const struct board_info __initcon
+       &board_96318ref,
+       &board_96318ref_p300,
+       &board_dsl_2751b_d1,
++      &board_FAST2704N,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
++      { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch b/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch
new file mode 100644 (file)
index 0000000..dec8adf
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++      .name                                   = "96368MT-1341N1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3026e_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -2272,6 +2325,7 @@ static const struct board_info __initcon
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
++      &board_VR3026e,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch b/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch
new file mode 100644 (file)
index 0000000..ab3e6fe
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -623,6 +623,50 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_R5010UNV2 = {
++      .name                                   = "96328ang",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -2256,6 +2300,7 @@ static const struct board_info __initcon
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+       &board_FAST2704V2,
++      &board_R5010UNV2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
++      { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
+       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch b/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch
new file mode 100644 (file)
index 0000000..3a14751
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HG622 = {
++      .name                           = "96368MVWG_hg622",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0xfa0000,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2366,6 +2412,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch b/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch
new file mode 100644 (file)
index 0000000..1619376
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata EVG2000_fixups[] = {
++  { .offset = 219, .value = 0xec08 },
++};
++
++static struct board_info __initdata board_EVG2000 = {
++      .name                           = "96369PVG",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name = "RGMII",
++                      },
++              },
++      },
++      .use_fallback_sprom     = 1,
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4322,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++              .board_fixups           = EVG2000_fixups,
++              .num_board_fixups       = ARRAY_SIZE(EVG2000_fixups),
++      },
++};
++
+ static struct board_info __initdata board_HG655b = {
+       .name                           = "HW65x",
+       .expected_cpu_id                = 0x6368,
+@@ -2412,6 +2448,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_EVG2000,
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
+@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
++      { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch b/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch
new file mode 100644 (file)
index 0000000..c61fcdd
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar
+  * known 6368 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_AV4202N = {
++      .name                           = "96368_Swiss_S1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++      .use_fallback_sprom     = 1,
++      .fallback_sprom = {
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++      },
++
++};
++
+ static struct board_info __initdata board_96368mvwg = {
+       .name                           = "96368MVWG",
+       .expected_cpu_id                = 0x6368,
+@@ -2445,6 +2490,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      &board_AV4202N,
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
+@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "adb,av4202n", .data = &board_AV4202N, },
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch b/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch
new file mode 100644 (file)
index 0000000..baed99c
--- /dev/null
@@ -0,0 +1,125 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vh4032n_fixups[] = {
++      { .offset = 2, .value = 0x04d2 },
++      { .offset = 4, .value = 0x4350 },
++      { .offset = 65, .value = 0x1300 },
++      { .offset = 68, .value = 0x0402 },
++      { .offset = 70, .value = 0x0090 },
++      { .offset = 71, .value = 0x4c19 },
++      { .offset = 72, .value = 0x2345 },
++      { .offset = 87, .value = 0x0315 },
++      { .offset = 88, .value = 0x0315 },
++      { .offset = 96, .value = 0x2048 },
++      { .offset = 97, .value = 0xfed7 },
++      { .offset = 98, .value = 0x15a6 },
++      { .offset = 99, .value = 0xfaee },
++      { .offset = 100, .value = 0x3e3a },
++      { .offset = 101, .value = 0x3a36 },
++      { .offset = 102, .value = 0xff7f },
++      { .offset = 103, .value = 0x11b9 },
++      { .offset = 104, .value = 0xfc53 },
++      { .offset = 105, .value = 0xffe6 },
++      { .offset = 106, .value = 0xfdd2 },
++      { .offset = 107, .value = 0xfe49 },
++      { .offset = 108, .value = 0xff6a },
++      { .offset = 109, .value = 0x136e },
++      { .offset = 110, .value = 0xfbed },
++      { .offset = 111, .value = 0x0000 },
++      { .offset = 112, .value = 0x2048 },
++      { .offset = 113, .value = 0xfee2 },
++      { .offset = 114, .value = 0x15e5 },
++      { .offset = 115, .value = 0xfaed },
++      { .offset = 116, .value = 0x3e3a },
++      { .offset = 117, .value = 0x3a36 },
++      { .offset = 118, .value = 0xffc8 },
++      { .offset = 119, .value = 0x12b8 },
++      { .offset = 120, .value = 0xfca1 },
++      { .offset = 121, .value = 0xff9b },
++      { .offset = 122, .value = 0x122a },
++      { .offset = 123, .value = 0xfcc8 },
++      { .offset = 124, .value = 0xff95 },
++      { .offset = 125, .value = 0x146b },
++      { .offset = 126, .value = 0xfbba },
++      { .offset = 127, .value = 0x0000 },
++      { .offset = 161, .value = 0x0000 },
++      { .offset = 162, .value = 0x0000 },
++      { .offset = 169, .value = 0x0000 },
++      { .offset = 170, .value = 0x0000 },
++      { .offset = 171, .value = 0x0000 },
++      { .offset = 172, .value = 0x0000 },
++      { .offset = 173, .value = 0x0000 },
++      { .offset = 174, .value = 0x0000 },
++      { .offset = 175, .value = 0x0000 },
++      { .offset = 176, .value = 0x0000 },
++      { .offset = 219, .value = 0x1108 },
++};
++
++static struct board_info __initdata board_VH4032N = {
++      .name                           = "VH4032N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vh4032n_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vh4032n_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -2498,6 +2598,7 @@ static const struct board_info __initcon
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
++      &board_VH4032N,
+       &board_VR3025u,
+       &board_VR3025un,
+       &board_VR3026e,
+@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
++      { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch b/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch
new file mode 100644 (file)
index 0000000..f2b2e1e
--- /dev/null
@@ -0,0 +1,48 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_R1000H = {
++      .name                           = "R1000H",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used  = 1,
++                              .phy_id  = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name  = "RGMII",
++                      },
++              },
++      },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+       .name                                   = "96368M-1541N",
+       .expected_cpu_id                = 0x6368,
+@@ -2598,6 +2621,7 @@ static const struct board_info __initcon
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
++      &board_R1000H,
+       &board_VH4032N,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
+       { .compatible = "adb,av4202n", .data = &board_AV4202N, },
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch b/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch
new file mode 100644 (file)
index 0000000..0393d46
--- /dev/null
@@ -0,0 +1,86 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -143,6 +143,67 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5315u_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1255 },
++      { .offset = 97, .value = 0xfe55 },
++      { .offset = 98, .value = 0x171d },
++      { .offset = 99, .value = 0xfa42 },
++      { .offset = 113, .value = 0xfeb7 },
++      { .offset = 114, .value = 0x18cd },
++      { .offset = 115, .value = 0xfa4f },
++      { .offset = 162, .value = 0x6444 },
++      { .offset = 170, .value = 0x6444 },
++      { .offset = 172, .value = 0x6444 },
++};
++
++static struct board_info __initdata board_AR5315u = {
++      .name                           = "96318A-1441N1",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5315u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
+       { .offset = 96, .value = 0x2046 },
+       { .offset = 97, .value = 0xfe9d },
+@@ -2538,6 +2599,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_AR5315u,
+       &board_dsl_2751b_d1,
+       &board_FAST2704N,
+ #endif
+@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
+       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
+       { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch b/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch
new file mode 100644 (file)
index 0000000..a48ecf9
--- /dev/null
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -357,6 +357,73 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ad1018_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1256 },
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe69 },
++      { .offset = 98, .value = 0x1726 },
++      { .offset = 99, .value = 0xfa5c },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfea8 },
++      { .offset = 114, .value = 0x1978 },
++      { .offset = 115, .value = 0xfa26 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 171, .value = 0x2222 },
++      { .offset = 173, .value = 0x2222 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x2222 },
++      { .offset = 176, .value = 0x4444 },
++};
++
++static struct board_info __initdata board_AD1018 = {
++      .name                                   = "96328avngr",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "FIBRE",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "LAN3",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "LAN2",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ad1018_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5381u_fixups[] = {
+       { .offset = 97, .value = 0xfee5 },
+       { .offset = 98, .value = 0x157c },
+@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AD1018,
+       &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+       { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
+       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
++      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch b/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch
new file mode 100644 (file)
index 0000000..c8db6c1
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_BSKYB_63168 = {
++      .name                           = "BSKYB_63168",
++      .expected_cpu_id                = 0x63268,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 0,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ /*
+@@ -2762,6 +2805,7 @@ static const struct board_info __initcon
+       &board_963268bu_p300,
+       &board_963269bhr,
+       &board_vw6339gu,
++      &board_BSKYB_63168,
+ #endif
+ };
+@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++      { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch b/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch
new file mode 100644 (file)
index 0000000..5f5b1c2
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/nvram.c
++++ b/arch/mips/bcm63xx/nvram.c
+@@ -24,6 +24,12 @@
+ static struct bcm963xx_nvram nvram;
+ static int mac_addr_used;
++/*
++ * Required export for WL
++ */
++u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
++EXPORT_SYMBOL(nvram_buf);
++
+ void __init bcm63xx_nvram_init(void *addr)
+ {
+       u32 crc, expected_crc;
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
diff --git a/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch b/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch
new file mode 100644 (file)
index 0000000..11a8353
--- /dev/null
@@ -0,0 +1,31 @@
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -8,6 +8,7 @@
+  */
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+@@ -387,7 +388,19 @@ struct fallback_sprom_match {
+       struct ssb_sprom sprom;
+ };
+-static struct fallback_sprom_match fallback_sprom;
++struct fallback_sprom_match fallback_sprom;
++
++int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
++{
++      if (pci_bus != fallback_sprom.pci_bus ||
++          pci_slot != fallback_sprom.pci_dev)
++              pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                      fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                      pci_bus, pci_slot);
++      memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
++      return 0;
++}
++EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
+ #if defined(CONFIG_SSB_PCIHOST)
+ int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch
new file mode 100644 (file)
index 0000000..2aca2f3
--- /dev/null
@@ -0,0 +1,30 @@
+From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
+From: Miguel GAIO <miguel.gaio@efixo.com>
+Date: Fri, 6 Jul 2012 14:12:33 +0200
+Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
+
+---
+ drivers/net/phy/rtl8367.c  |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/phy/rtl8367.c
++++ b/drivers/net/phy/rtl8367.c
+@@ -146,6 +146,10 @@
+ #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
+ #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
++#define RTL8367_PHY_AD_REG                    0x130f
++#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
++#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
++
+ #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
+ #define   RTL8367_DI_FORCE_MODE                       BIT(12)
+ #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
+@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
+       case RTL8367_EXTIF_MODE_RGMII_33V:
+               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
+               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
++              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
+               break;
+       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
new file mode 100644 (file)
index 0000000..7a3c2f0
--- /dev/null
@@ -0,0 +1,26 @@
+From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 6 Apr 2014 22:33:16 +0200
+Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
+
+Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
+it by ensuring we are always doing aligned copies.
+
+Should fix filename corruption in jffs2 with SMP.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ fs/jffs2/nodelist.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/fs/jffs2/nodelist.h
++++ b/fs/jffs2/nodelist.h
+@@ -259,7 +259,7 @@ struct jffs2_full_dirent
+       uint32_t ino; /* == zero for unlink */
+       unsigned int nhash;
+       unsigned char type;
+-      unsigned char name[0];
++      unsigned char name[0] __attribute__((aligned((sizeof(long)))));
+ };
+ /*
diff --git a/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch
new file mode 100644 (file)
index 0000000..2d990f7
--- /dev/null
@@ -0,0 +1,13 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2239,6 +2239,10 @@ static int bcm_enetsw_open(struct net_de
+               rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
+               rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++              if (BCMCPU_IS_63268()) {
++                      rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
++                      rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
++              }
+               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+       }
diff --git a/target/linux/bcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/bcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
new file mode 100644 (file)
index 0000000..3974b9b
--- /dev/null
@@ -0,0 +1,28 @@
+From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:19 +0100
+Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
+
+Knowledge of the clock setup delay should remain at the clock level (so
+it can be clock specific and CPU specific). Add the 100 milliseconds
+required clock delay for the USB host clock when it gets enabled.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else
++              return;
++
++      if (enable)
++              msleep(100);
+ }
+ static struct clk clk_usbh = {
diff --git a/target/linux/bcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/bcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
new file mode 100644 (file)
index 0000000..0bbf7c8
--- /dev/null
@@ -0,0 +1,41 @@
+From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:20 +0100
+Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
+ clock code
+
+This patch adds the required 10 micro seconds delay to the USB device
+clock enable operation. Put this where the correct clock knowledege is,
+which is in the clock code, and remove this delay from the bcm63xx_udc
+gadget driver where it was before.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c          |    5 +++++
+ drivers/usb/gadget/bcm63xx_udc.c |    1 -
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else
++              return;
++
++      if (enable)
++              udelay(10);
+ }
+ static struct clk clk_usbd = {
+--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
++++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
+@@ -402,7 +402,6 @@ static inline void set_clocks(struct bcm
+       if (is_enabled) {
+               clk_enable(udc->usbh_clk);
+               clk_enable(udc->usbd_clk);
+-              udelay(10);
+       } else {
+               clk_disable(udc->usbd_clk);
+               clk_disable(udc->usbh_clk);
diff --git a/target/linux/bcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/bcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
new file mode 100644 (file)
index 0000000..d276e08
--- /dev/null
@@ -0,0 +1,151 @@
+From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:21 +0100
+Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
+ register
+
+This patch moves the code touching the USB private register in the
+bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
+preparation for adding support for OHCI and EHCI host controllers which
+will also touch the USB private register.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
+ drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
+ 4 files changed, 67 insertions(+), 24 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/usb-common.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-usbd.o
++                 dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -0,0 +1,53 @@
++/*
++ * Broadcom BCM63xx common USB device configuration code
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
++ * Copyright (C) 2012 Broadcom Corporation
++ *
++ */
++#include <linux/export.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_device) {
++              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      } else {
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      }
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++      if (is_device)
++              val |= USBH_PRIV_SWAP_USBD_MASK;
++      else
++              val &= ~USBH_PRIV_SWAP_USBD_MASK;
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
++
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
++{
++      u32 val;
++
++      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++      if (is_on)
++              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      else
++              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -0,0 +1,9 @@
++#ifndef BCM63XX_USB_PRIV_H_
++#define BCM63XX_USB_PRIV_H_
++
++#include <linux/types.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++
++#endif /* BCM63XX_USB_PRIV_H_ */
+--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
++++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
+@@ -35,6 +35,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_usb_priv.h>
+ #define DRV_MODULE_NAME               "bcm63xx_udc"
+@@ -879,22 +880,7 @@ static void bcm63xx_select_phy_mode(stru
+               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+       }
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_device) {
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      } else {
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      }
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+-
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+-      if (is_device)
+-              val |= USBH_PRIV_SWAP_USBD_MASK;
+-      else
+-              val &= ~USBH_PRIV_SWAP_USBD_MASK;
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
+ }
+ /**
+@@ -908,14 +894,9 @@ static void bcm63xx_select_phy_mode(stru
+  */
+ static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+ {
+-      u32 val, portmask = BIT(udc->pd->port_no);
++      u32 portmask = BIT(udc->pd->port_no);
+-      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-      if (is_on)
+-              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      else
+-              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++      bcm63xx_usb_priv_select_pullup(portmask, is_on);
+ }
+ /**
diff --git a/target/linux/bcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/bcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
new file mode 100644 (file)
index 0000000..40bbe08
--- /dev/null
@@ -0,0 +1,169 @@
+From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:22 +0100
+Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
+ common USB code
+
+This patch updates the common USB code touching the USB private
+registers with the specific bits to properly enable OHCI and EHCI
+controllers on BCM63xx SoCs. As a result we now need to protect access
+to Read Modify Write sequences using a spinlock because we cannot
+guarantee that any of the exposed helper will not be called
+concurrently.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
+ 2 files changed, 99 insertions(+)
+
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -5,10 +5,12 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+  * Copyright (C) 2012 Broadcom Corporation
+  *
+  */
++#include <linux/spinlock.h>
+ #include <linux/export.h>
+ #include <bcm63xx_cpu.h>
+@@ -16,9 +18,14 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_usb_priv.h>
++static DEFINE_SPINLOCK(usb_priv_reg_lock);
++
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_device) {
+@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
+       else
+               val &= ~USBH_PRIV_SWAP_USBD_MASK;
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
+ {
+       u32 val;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
+       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+       if (is_on)
+@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
+       else
+               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
++
++/* The following array represents the meaning of the DESC/DATA
++ * endian swapping with respect to the CPU configured endianness
++ *
++ * DATA       ENDN    mmio    descriptor
++ * 0  0       BE      invalid
++ * 0  1       BE      LE
++ * 1  0       BE      BE
++ * 1  1       BE      invalid
++ *
++ * Since BCM63XX SoCs are configured to be in big-endian mode
++ * we want configuration at line 3.
++ */
++void bcm63xx_usb_priv_ohci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6348())
++              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++      else if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
++
++void bcm63xx_usb_priv_ehci_cfg_set(void)
++{
++      u32 reg;
++      unsigned long flags;
++
++      spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++      if (BCMCPU_IS_6358()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++
++              /*
++               * The magic value comes for the original vendor BSP
++               * and is needed for USB to work. Datasheet does not
++               * help, so the magic value is used as-is.
++               */
++              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++                              USBH_PRIV_TEST_6358_REG);
++
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      }
++
++      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -5,5 +5,7 @@
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++void bcm63xx_usb_priv_ohci_cfg_set(void);
++void bcm63xx_usb_priv_ehci_cfg_set(void);
+ #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..64ea473
--- /dev/null
@@ -0,0 +1,62 @@
+From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:23 +0100
+Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+OHCI controller, and ensures that all relevant OHCI-related
+configuration options are correctly selected. So far, OHCI support is
+available for the 6328, 6348, 6358 and 6358 SoCs.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++config BCM63XX_OHCI
++      bool
++      select USB_ARCH_HAS_OHCI
++      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
++      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
+       bool "support 6348 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/bcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
new file mode 100644 (file)
index 0000000..8a532fe
--- /dev/null
@@ -0,0 +1,138 @@
+From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:24 +0100
+Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
+driven by the ohci-platform generic driver by using specific power
+on/off/suspend callback to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
+ 3 files changed, 101 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-usbd.o usb-common.o
++                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,94 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ohci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ohci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ohci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .no_big_frame_no        = 1,
++      .num_ports              = 1,
++      .power_on               = bcm63xx_ohci_power_on,
++      .power_off              = bcm63xx_ohci_power_off,
++      .power_suspend          = bcm63xx_ohci_power_off,
++};
++
++static struct platform_device bcm63xx_ohci_device = {
++      .name           = "ohci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ohci_resources),
++      .resource       = ohci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ohci_pdata,
++              .dma_mask               = &ohci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
++              return -ENODEV;
++
++      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++      ohci_resources[0].end = ohci_resources[0].start;
++      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++
++      return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..6fc5551
--- /dev/null
@@ -0,0 +1,36 @@
+From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:25 +0100
+Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
+ enables it
+
+BCM63XX-based boards can control the registration of the OHCI controller
+by setting their has_ohci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to
+register the OHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -27,6 +27,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -881,6 +882,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+        */
diff --git a/target/linux/bcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
new file mode 100644 (file)
index 0000000..f7311a8
--- /dev/null
@@ -0,0 +1,62 @@
+From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:26 +0100
+Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+EHCI controller, and ensures that all relevant EHCI-related
+configuration options are selected. So far BCM6328, BCM6358 and BCM6368
+have an EHCI controller and do select this symbol. Update
+drivers/usb/host/Kconfig with BCM63XX to update direct unmet
+dependencies.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |    9 +++++++++
+ drivers/usb/host/Kconfig  |    5 +++--
+ 2 files changed, 12 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -13,11 +13,18 @@ config BCM63XX_OHCI
+       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
+       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++config BCM63XX_EHCI
++      bool
++      select USB_ARCH_HAS_EHCI
++      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
++      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/bcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
new file mode 100644 (file)
index 0000000..7d0a35c
--- /dev/null
@@ -0,0 +1,136 @@
+From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:27 +0100
+Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
+driven by the generic ehci-platform driver by using specific power
+on/off/suspend callbacks to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
+ 3 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,92 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/usb/ehci_pdriver.h>
++#include <linux/dma-mapping.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++      {
++              .start          = -1, /* filled at runtime */
++              .end            = -1, /* filled at runtime */
++              .flags          = IORESOURCE_MEM,
++      },
++      {
++              .start          = -1, /* filled at runtime */
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++static u64 ehci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ehci_power_on(struct platform_device *pdev)
++{
++      usb_host_clock = clk_get(&pdev->dev, "usbh");
++      if (IS_ERR_OR_NULL(usb_host_clock))
++              return -ENODEV;
++
++      clk_prepare_enable(usb_host_clock);
++
++      bcm63xx_usb_priv_ehci_cfg_set();
++
++      return 0;
++}
++
++static void bcm63xx_ehci_power_off(struct platform_device *pdev)
++{
++      if (!IS_ERR_OR_NULL(usb_host_clock)) {
++              clk_disable_unprepare(usb_host_clock);
++              clk_put(usb_host_clock);
++      }
++}
++
++static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
++      .big_endian_desc        = 1,
++      .big_endian_mmio        = 1,
++      .power_on               = bcm63xx_ehci_power_on,
++      .power_off              = bcm63xx_ehci_power_off,
++      .power_suspend          = bcm63xx_ehci_power_off,
++};
++
++static struct platform_device bcm63xx_ehci_device = {
++      .name           = "ehci-platform",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(ehci_resources),
++      .resource       = ehci_resources,
++      .dev            = {
++              .platform_data          = &bcm63xx_ehci_pdata,
++              .dma_mask               = &ehci_dmamask,
++              .coherent_dma_mask      = DMA_BIT_MASK(32),
++      },
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              return 0;
++
++      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++      ehci_resources[0].end = ehci_resources[0].start;
++      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++
++      return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
new file mode 100644 (file)
index 0000000..3db82bb
--- /dev/null
@@ -0,0 +1,36 @@
+From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:28 +0100
+Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
+ enables it
+
+BCM63XX-based board can control the registration of the EHCI controller
+by setting their has_ehci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to register
+the EHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -27,6 +27,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -882,6 +883,9 @@ int __init board_register_devices(void)
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
+       if (board.has_ohci0)
+               bcm63xx_ohci_register();
diff --git a/target/linux/bcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/bcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
new file mode 100644 (file)
index 0000000..6d91129
--- /dev/null
@@ -0,0 +1,24 @@
+From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:30 +0100
+Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
+ overcurrent
+
+This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
+does not support proper overcurrent reporting.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
+ static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
++      .ignore_oc              = 1,
+       .power_on               = bcm63xx_ehci_power_on,
+       .power_off              = bcm63xx_ehci_power_off,
+       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/bcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/bcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch
new file mode 100644 (file)
index 0000000..6fd5cbb
--- /dev/null
@@ -0,0 +1,482 @@
+From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:29:43 +0200
+Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser
+
+Move the bcm963xx Image Tag parsing into its own partition parser. This
+Allows reusing the parser with different full flash parsers.
+
+While moving it, rename it to bcm963* to better reflect it isn't chip
+but board specific.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+I tried to keep the code as-is, to keep the changes as small as
+possible.
+
+One side effect is that the partitions get renumbered, which means any
+root=/dev/mtdblock* will now point to the wrong mtd device. But since
+bcm963xx boards will require these hardcoded in the kernel commandline
+anyway this should b a non issue, as it can be easily updated.
+
+There is no such thing in the mips/bcm63xx defconfig, so nothing to update
+there.
+
+ drivers/mtd/Kconfig                   |   1 +
+ drivers/mtd/bcm63xxpart.c             | 155 ++----------------------
+ drivers/mtd/parsers/Kconfig           |  11 ++
+ drivers/mtd/parsers/Makefile          |   1 +
+ drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++
+ 5 files changed, 235 insertions(+), 147 deletions(-)
+ create mode 100644 drivers/mtd/parsers/parser_imagetag.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -162,6 +162,7 @@ config MTD_BCM63XX_PARTS
+       tristate "BCM63XX CFE partitioning support"
+       depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+       select CRC32
++      select MTD_PARSER_IMAGETAG
+       help
+         This provides partions parsing for BCM63xx devices with CFE
+         bootloaders.
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd
+       return 0;
+ }
+-static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
+-      loff_t tag_offset, struct bcm_tag *buf)
+-{
+-      int ret;
+-      size_t retlen;
+-      u32 computed_crc;
+-
+-      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
+-      if (ret)
+-              return ret;
+-
+-      if (retlen != sizeof(*buf))
+-              return -EIO;
+-
+-      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
+-                              offsetof(struct bcm_tag, header_crc));
+-      if (computed_crc == buf->header_crc) {
+-              STR_NULL_TERMINATE(buf->board_id);
+-              STR_NULL_TERMINATE(buf->tag_version);
+-
+-              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
+-                      name, tag_offset, buf->tag_version, buf->board_id);
+-
+-              return 0;
+-      }
+-
+-      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
+-              name, tag_offset, buf->header_crc, computed_crc);
+-      return 1;
+-}
++static const char * const bcm63xx_cfe_part_types[] = {
++      "bcm963xx-imagetag",
++      NULL,
++};
+ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
+       const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
+ {
+-      /* CFE, NVRAM and global Linux are always present */
+-      int nrparts = 3, curpart = 0;
+-      struct bcm_tag *buf = NULL;
+       struct mtd_partition *parts;
+-      int ret;
+-      unsigned int rootfsaddr, kerneladdr, spareaddr;
+-      unsigned int rootfslen, kernellen, sparelen, totallen;
++      int nrparts = 3, curpart = 0;
+       unsigned int cfelen, nvramlen;
+       unsigned int cfe_erasesize;
+       int i;
+-      bool rootfs_first = false;
+       cfe_erasesize = max_t(uint32_t, master->erasesize,
+                             BCM963XX_CFE_BLOCK_SIZE);
+@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti
+       nvramlen = nvram->psi_size * SZ_1K;
+       nvramlen = roundup(nvramlen, cfe_erasesize);
+-      buf = vmalloc(sizeof(struct bcm_tag));
+-      if (!buf)
+-              return -ENOMEM;
+-
+-      /* Get the tag */
+-      ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
+-      if (!ret) {
+-              STR_NULL_TERMINATE(buf->flash_image_start);
+-              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
+-                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
+-                      pr_err("invalid rootfs address: %*ph\n",
+-                              (int)sizeof(buf->flash_image_start),
+-                              buf->flash_image_start);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->kernel_address);
+-              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
+-                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
+-                      pr_err("invalid kernel address: %*ph\n",
+-                              (int)sizeof(buf->kernel_address),
+-                              buf->kernel_address);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->kernel_length);
+-              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
+-                      pr_err("invalid kernel length: %*ph\n",
+-                              (int)sizeof(buf->kernel_length),
+-                              buf->kernel_length);
+-                      goto invalid_tag;
+-              }
+-
+-              STR_NULL_TERMINATE(buf->total_length);
+-              if (kstrtouint(buf->total_length, 10, &totallen)) {
+-                      pr_err("invalid total length: %*ph\n",
+-                              (int)sizeof(buf->total_length),
+-                              buf->total_length);
+-                      goto invalid_tag;
+-              }
+-
+-              kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
+-              rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
+-              spareaddr = roundup(totallen, master->erasesize) + cfelen;
+-
+-              if (rootfsaddr < kerneladdr) {
+-                      /* default Broadcom layout */
+-                      rootfslen = kerneladdr - rootfsaddr;
+-                      rootfs_first = true;
+-              } else {
+-                      /* OpenWrt layout */
+-                      rootfsaddr = kerneladdr + kernellen;
+-                      rootfslen = spareaddr - rootfsaddr;
+-              }
+-      } else if (ret > 0) {
+-invalid_tag:
+-              kernellen = 0;
+-              rootfslen = 0;
+-              rootfsaddr = 0;
+-              spareaddr = cfelen;
+-      } else {
+-              goto out;
+-      }
+-      sparelen = master->size - spareaddr - nvramlen;
+-
+-      /* Determine number of partitions */
+-      if (rootfslen > 0)
+-              nrparts++;
+-
+-      if (kernellen > 0)
+-              nrparts++;
+-
+       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+-      if (!parts) {
+-              ret = -ENOMEM;
+-              goto out;
+-      }
++      if (!parts)
++              return -ENOMEM;
+       /* Start building partition list */
+       parts[curpart].name = "CFE";
+@@ -230,30 +124,6 @@ invalid_tag:
+       parts[curpart].size = cfelen;
+       curpart++;
+-      if (kernellen > 0) {
+-              int kernelpart = curpart;
+-
+-              if (rootfslen > 0 && rootfs_first)
+-                      kernelpart++;
+-              parts[kernelpart].name = "kernel";
+-              parts[kernelpart].offset = kerneladdr;
+-              parts[kernelpart].size = kernellen;
+-              curpart++;
+-      }
+-
+-      if (rootfslen > 0) {
+-              int rootfspart = curpart;
+-
+-              if (kernellen > 0 && rootfs_first)
+-                      rootfspart--;
+-              parts[rootfspart].name = "rootfs";
+-              parts[rootfspart].offset = rootfsaddr;
+-              parts[rootfspart].size = rootfslen;
+-              if (sparelen > 0  && !rootfs_first)
+-                      parts[rootfspart].size += sparelen;
+-              curpart++;
+-      }
+-
+       parts[curpart].name = "nvram";
+       parts[curpart].offset = master->size - nvramlen;
+       parts[curpart].size = nvramlen;
+@@ -263,22 +133,13 @@ invalid_tag:
+       parts[curpart].name = "linux";
+       parts[curpart].offset = cfelen;
+       parts[curpart].size = master->size - cfelen - nvramlen;
++      parts[curpart].types = bcm63xx_cfe_part_types;
+       for (i = 0; i < nrparts; i++)
+               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+                       parts[i].name, parts[i].offset, parts[i].size);
+-      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
+-              sparelen);
+-
+       *pparts = parts;
+-      ret = 0;
+-
+-out:
+-      vfree(buf);
+-
+-      if (ret)
+-              return ret;
+       return nrparts;
+ }
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -1,3 +1,14 @@
++config MTD_PARSER_IMAGETAG
++      tristate "Parser for BCM963XX Image Tag format partitions"
++      depends on BCM63XX || BMIPS || COMPILE_TEST
++      select CRC32
++      help
++        Image Tag is the firmware header used by broadcom on their xDSL line
++        of devices. It is used to describe the offsets and lengths of kernel
++        and rootfs partitions.
++        This driver adds support for parsing a partition with an Image Tag
++        header and creates up to two partitions, kernel and rootfs.
++
+ config MTD_PARSER_TRX
+       tristate "Parser for TRX format partitions"
+       depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -1,2 +1,3 @@
++obj-$(CONFIG_MTD_PARSER_IMAGETAG)     += parser_imagetag.o
+ obj-$(CONFIG_MTD_PARSER_TRX)          += parser_trx.o
+ obj-$(CONFIG_MTD_SHARPSL_PARTS)               += sharpslpart.o
+--- /dev/null
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -0,0 +1,214 @@
++/*
++ * BCM63XX CFE image tag parser
++ *
++ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
++ *                      Mike Albon <malbon@openwrt.org>
++ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
++ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++
++#include <linux/bcm963xx_tag.h>
++#include <linux/crc32.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/sizes.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++/* Ensure strings read from flash structs are null terminated */
++#define STR_NULL_TERMINATE(x) \
++      do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
++
++static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
++      loff_t tag_offset, struct bcm_tag *buf)
++{
++      int ret;
++      size_t retlen;
++      u32 computed_crc;
++
++      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
++      if (ret)
++              return ret;
++
++      if (retlen != sizeof(*buf))
++              return -EIO;
++
++      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
++                              offsetof(struct bcm_tag, header_crc));
++      if (computed_crc == buf->header_crc) {
++              STR_NULL_TERMINATE(buf->board_id);
++              STR_NULL_TERMINATE(buf->tag_version);
++
++              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
++                      name, tag_offset, buf->tag_version, buf->board_id);
++
++              return 0;
++      }
++
++      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
++              name, tag_offset, buf->header_crc, computed_crc);
++      return -EINVAL;
++}
++
++static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
++                                      const struct mtd_partition **pparts,
++                                      struct mtd_part_parser_data *data)
++{
++      /* CFE, NVRAM and global Linux are always present */
++      int nrparts = 0, curpart = 0;
++      struct bcm_tag *buf = NULL;
++      struct mtd_partition *parts;
++      int ret;
++      unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
++      unsigned int rootfslen, kernellen, sparelen, totallen;
++      int i;
++      bool rootfs_first = false;
++
++      buf = vmalloc(sizeof(struct bcm_tag));
++      if (!buf)
++              return -ENOMEM;
++
++      /* Get the tag */
++      ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
++      if (!ret) {
++              STR_NULL_TERMINATE(buf->flash_image_start);
++              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
++                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
++                      pr_err("invalid rootfs address: %*ph\n",
++                              (int)sizeof(buf->flash_image_start),
++                              buf->flash_image_start);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->kernel_address);
++              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
++                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
++                      pr_err("invalid kernel address: %*ph\n",
++                              (int)sizeof(buf->kernel_address),
++                              buf->kernel_address);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->kernel_length);
++              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
++                      pr_err("invalid kernel length: %*ph\n",
++                              (int)sizeof(buf->kernel_length),
++                              buf->kernel_length);
++                      goto out;
++              }
++
++              STR_NULL_TERMINATE(buf->total_length);
++              if (kstrtouint(buf->total_length, 10, &totallen)) {
++                      pr_err("invalid total length: %*ph\n",
++                              (int)sizeof(buf->total_length),
++                              buf->total_length);
++                      goto out;
++              }
++
++              /*
++               * Addresses are flash absolute, so convert to partition
++               * relative addresses. Assume either kernel or rootfs will
++               * directly follow the image tag.
++               */
++              if (rootfsaddr < kerneladdr)
++                      offset = rootfsaddr - sizeof(struct bcm_tag);
++              else
++                      offset = kerneladdr - sizeof(struct bcm_tag);
++
++              kerneladdr = kerneladdr - offset;
++              rootfsaddr = rootfsaddr - offset;
++              spareaddr = roundup(totallen, master->erasesize);
++
++              if (rootfsaddr < kerneladdr) {
++                      /* default Broadcom layout */
++                      rootfslen = kerneladdr - rootfsaddr;
++                      rootfs_first = true;
++              } else {
++                      /* OpenWrt layout */
++                      rootfsaddr = kerneladdr + kernellen;
++                      rootfslen = spareaddr - rootfsaddr;
++              }
++      } else {
++              goto out;
++      }
++      sparelen = master->size - spareaddr;
++
++      /* Determine number of partitions */
++      if (rootfslen > 0)
++              nrparts++;
++
++      if (kernellen > 0)
++              nrparts++;
++
++      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
++      if (!parts) {
++              ret = -ENOMEM;
++              goto out;
++      }
++
++      /* Start building partition list */
++      if (kernellen > 0) {
++              int kernelpart = curpart;
++
++              if (rootfslen > 0 && rootfs_first)
++                      kernelpart++;
++              parts[kernelpart].name = "kernel";
++              parts[kernelpart].offset = kerneladdr;
++              parts[kernelpart].size = kernellen;
++              curpart++;
++      }
++
++      if (rootfslen > 0) {
++              int rootfspart = curpart;
++
++              if (kernellen > 0 && rootfs_first)
++                      rootfspart--;
++              parts[rootfspart].name = "rootfs";
++              parts[rootfspart].offset = rootfsaddr;
++              parts[rootfspart].size = rootfslen;
++              if (sparelen > 0  && !rootfs_first)
++                      parts[rootfspart].size += sparelen;
++              curpart++;
++      }
++
++      for (i = 0; i < nrparts; i++)
++              pr_info("Partition %d is %s offset %llx and length %llx\n", i,
++                      parts[i].name, parts[i].offset, parts[i].size);
++
++      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
++              sparelen);
++
++      *pparts = parts;
++      ret = 0;
++
++out:
++      vfree(buf);
++
++      if (ret)
++              return ret;
++
++      return nrparts;
++}
++
++static struct mtd_part_parser bcm963xx_imagetag_parser = {
++      .parse_fn = bcm963xx_parse_imagetag_partitions,
++      .name = "bcm963xx-imagetag",
++};
++module_mtd_part_parser(bcm963xx_imagetag_parser);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
++MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
++MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
++MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
++MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/target/linux/bcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch b/target/linux/bcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch
new file mode 100644 (file)
index 0000000..9b3f2c4
--- /dev/null
@@ -0,0 +1,37 @@
+From 89cd5efa4a0d342b860a726bb1d382e4db4b96a4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:34:42 +0200
+Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/bcm63xxpart.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -34,6 +34,7 @@
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+ #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
+@@ -172,9 +173,16 @@ out:
+       return ret;
+ };
++static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
++      { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
++      {},
++};
++MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
++
+ static struct mtd_part_parser bcm63xx_cfe_parser = {
+       .parse_fn = bcm63xx_parse_cfe_partitions,
+       .name = "bcm63xxpart",
++      .of_match_table = parse_bcm63xx_cfe_match_table,
+ };
+ module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/target/linux/bcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/bcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch
new file mode 100644 (file)
index 0000000..04978b3
--- /dev/null
@@ -0,0 +1,37 @@
+From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 28 Jun 2017 18:37:12 +0200
+Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/parsers/parser_imagetag.c
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -24,6 +24,7 @@
+ #include <linux/vmalloc.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+ /* Ensure strings read from flash structs are null terminated */
+ #define STR_NULL_TERMINATE(x) \
+@@ -200,9 +201,16 @@ out:
+       return nrparts;
+ }
++static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
++      { .compatible = "brcm,bcm963xx-imagetag" },
++      {},
++};
++MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
++
+ static struct mtd_part_parser bcm963xx_imagetag_parser = {
+       .parse_fn = bcm963xx_parse_imagetag_partitions,
+       .name = "bcm963xx-imagetag",
++      .of_match_table = parse_bcm963xx_imagetag_match_table,
+ };
+ module_mtd_part_parser(bcm963xx_imagetag_parser);
diff --git a/target/linux/bcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch
new file mode 100644 (file)
index 0000000..19ea476
--- /dev/null
@@ -0,0 +1,226 @@
+From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:07:42 +0200
+Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
+
+Setup directory and add a helper for bcm63xx pinctrl support.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/Kconfig                   |   1 +
+ drivers/pinctrl/Makefile                  |   1 +
+ drivers/pinctrl/bcm63xx/Kconfig           |   3 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
+ 7 files changed, 163 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
+ create mode 100644 drivers/pinctrl/bcm63xx/Makefile
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
+
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -341,6 +341,7 @@ config PINCTRL_OCELOT
+ source "drivers/pinctrl/actions/Kconfig"
+ source "drivers/pinctrl/aspeed/Kconfig"
+ source "drivers/pinctrl/bcm/Kconfig"
++source "drivers/pinctrl/bcm63xx/Kconfig"
+ source "drivers/pinctrl/berlin/Kconfig"
+ source "drivers/pinctrl/freescale/Kconfig"
+ source "drivers/pinctrl/intel/Kconfig"
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-
+ obj-y                         += actions/
+ obj-$(CONFIG_ARCH_ASPEED)     += aspeed/
+ obj-y                         += bcm/
++obj-y                         += bcm63xx/
+ obj-$(CONFIG_PINCTRL_BERLIN)  += berlin/
+ obj-y                         += freescale/
+ obj-$(CONFIG_X86)             += intel/
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -0,0 +1,3 @@
++config PINCTRL_BCM63XX
++      bool
++      select GPIO_GENERIC
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
+@@ -0,0 +1,155 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/device.h>
++#include <linux/gpio/driver.h>
++#include <linux/of_irq.h>
++
++#include "pinctrl-bcm63xx.h"
++#include "../core.h"
++
++#define BANK_SIZE     sizeof(u32)
++#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
++
++#ifdef CONFIG_OF
++static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
++                               const struct of_phandle_args *gpiospec,
++                               u32 *flags)
++{
++      struct gpio_chip *base = gpiochip_get_data(gc);
++      int pin = gpiospec->args[0];
++
++      if (gc != &base[pin / PINS_PER_BANK])
++              return -EINVAL;
++
++      pin = pin % PINS_PER_BANK;
++
++      if (pin >= gc->ngpio)
++              return -EINVAL;
++
++      if (flags)
++              *flags = gpiospec->args[1];
++
++      return pin;
++}
++#endif
++
++static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++      struct gpio_chip *base = gpiochip_get_data(chip);
++      char irq_name[7]; /* "gpioXX" */
++
++      /* FIXME: this is ugly */
++      sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
++      return of_irq_get_byname(chip->of_node, irq_name);
++}
++
++static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
++                            void __iomem *dirout, void __iomem *data,
++                            size_t sz, int ngpio)
++
++{
++      int banks, chips, i, ret = -EINVAL;
++
++      chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
++      banks = sz / BANK_SIZE;
++
++      for (i = 0; i < chips; i++) {
++              int offset, pins;
++              int reg_offset;
++              char *label;
++
++              label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
++              if (!label)
++                      return -ENOMEM;
++
++              offset = i * PINS_PER_BANK;
++              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
++
++              /* the registers are treated like a huge big endian register */
++              reg_offset = (banks - i - 1) * BANK_SIZE;
++
++              ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
++                               NULL, NULL, dirout + reg_offset, NULL,
++                               BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++              if (ret)
++                      return ret;
++
++              gc[i].request = gpiochip_generic_request;
++              gc[i].free = gpiochip_generic_free;
++
++              if (of_get_property(dev->of_node, "interrupt-names", NULL))
++                      gc[i].to_irq = bcm63xx_gpio_to_irq;
++
++#ifdef CONFIG_OF
++              gc[i].of_gpio_n_cells = 2;
++              gc[i].of_xlate = bcm63xx_gpio_of_xlate;
++#endif
++
++              gc[i].label = label;
++              gc[i].ngpio = pins;
++
++              devm_gpiochip_add_data(dev, &gc[i], gc);
++      }
++
++      return 0;
++}
++
++static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
++                                  int ngpio)
++{
++      int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
++
++      for (i = 0; i < chips; i++) {
++              int offset, pins;
++
++              offset = i * PINS_PER_BANK;
++              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
++
++              gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
++      }
++}
++
++struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
++                                           struct pinctrl_desc *desc,
++                                           void *priv, struct gpio_chip *gc,
++                                           int ngpio)
++{
++      struct pinctrl_dev *pctldev;
++      struct resource *res;
++      void __iomem *dirout, *data;
++      size_t sz;
++      int ret;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
++      dirout = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(dirout))
++              return ERR_CAST(dirout);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
++      data = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(data))
++              return ERR_CAST(data);
++
++      sz = resource_size(res);
++
++      ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
++      if (ret)
++              return ERR_PTR(ret);
++
++      pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
++      if (IS_ERR(pctldev))
++              return pctldev;
++
++      bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
++
++      dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
++
++      return pctldev;
++}
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
+@@ -0,0 +1,14 @@
++#ifndef __PINCTRL_BCM63XX
++#define __PINCTRL_BCM63XX
++
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/platform_device.h>
++
++struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
++                                           struct pinctrl_desc *desc,
++                                           void *priv, struct gpio_chip *gc,
++                                           int ngpio);
++
++#endif
diff --git a/target/linux/bcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..3a2a781
--- /dev/null
@@ -0,0 +1,78 @@
+From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:33:56 +0200
+Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6328 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
+@@ -0,0 +1,61 @@
++* Broadcom BCM6328 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6328-pinctrl".
++- reg: Register specifies of dirout, dat, mode, mux registers.
++- reg-names: Must be "dirout", "dat", "mode", "mux".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6328-pinctrl";
++      reg = <0x10000080 0x8>,
++            <0x10000088 0x8>,
++            <0x10000098 0x4>,
++            <0x1000009c 0xc>;
++      reg-names = "dirout", "dat", "mode", "mux";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       led
++gpio1         1       led
++gpio2         2       led
++gpio3         3       led
++gpio4         4       led
++gpio5         5       led
++gpio6         6       led, serial_led_data
++gpio7         7       led, serial_led_clk
++gpio8         8       led
++gpio9         9       led
++gpio10                10      led
++gpio11                11      led
++gpio12                12      led
++gpio13                13      led
++gpio14                14      led
++gpio15                15      led
++gpio16                16      led, pcie_clkreq
++gpio17                17      led
++gpio18                18      led
++gpio19                19      led
++gpio20                20      led
++gpio21                21      led
++gpio22                22      led
++gpio23                23      led
++gpio24                24      -
++gpio25                25      ephy0_act_led
++gpio26                26      ephy1_act_led
++gpio27                27      ephy2_act_led
++gpio28                28      ephy3_act_led
++gpio29                29      -
++gpio30                30      -
++gpio31                31      -
++hsspi_cs1     -       hsspi_cs1
++usb_port1     -       usb_host_port, usb_device_port
diff --git a/target/linux/bcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
new file mode 100644 (file)
index 0000000..3c5f15b
--- /dev/null
@@ -0,0 +1,495 @@
+From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:12:50 +0200
+Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
+
+Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
+GPIOs, as LEDs for the integrated LED controller, or various other
+functions. Its pincontrol mux registers also control other aspects, like
+switching the second USB port between host and device mode.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
+ 3 files changed, 464 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -1,3 +1,10 @@
+ config PINCTRL_BCM63XX
+       bool
+       select GPIO_GENERIC
++
++config PINCTRL_BCM6328
++      bool "BCM6328 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
++obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
+@@ -0,0 +1,456 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/machine.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6328_MUX_LO_REG    0x4
++#define BCM6328_MUX_HI_REG    0x0
++#define BCM6328_MUX_OTHER_REG 0x8
++
++#define BCM6328_NGPIO         32
++
++struct bcm6328_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6328_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned mode_val:1;
++      unsigned mux_val:2;
++};
++
++struct bcm6328_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      void __iomem *mux[3];
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio;
++};
++
++static const struct pinctrl_pin_desc bcm6328_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++
++      /*
++       * No idea where they really are; so let's put them according
++       * to their mux offsets.
++       */
++      PINCTRL_PIN(36, "hsspi_cs1"),
++      PINCTRL_PIN(38, "usb_p2"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++
++static unsigned hsspi_cs1_pins[] = { 36 };
++static unsigned usb_port1_pins[] = { 38 };
++
++#define BCM6328_GROUP(n)                                      \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm6328_pingroup bcm6328_groups[] = {
++      BCM6328_GROUP(gpio0),
++      BCM6328_GROUP(gpio1),
++      BCM6328_GROUP(gpio2),
++      BCM6328_GROUP(gpio3),
++      BCM6328_GROUP(gpio4),
++      BCM6328_GROUP(gpio5),
++      BCM6328_GROUP(gpio6),
++      BCM6328_GROUP(gpio7),
++      BCM6328_GROUP(gpio8),
++      BCM6328_GROUP(gpio9),
++      BCM6328_GROUP(gpio10),
++      BCM6328_GROUP(gpio11),
++      BCM6328_GROUP(gpio12),
++      BCM6328_GROUP(gpio13),
++      BCM6328_GROUP(gpio14),
++      BCM6328_GROUP(gpio15),
++      BCM6328_GROUP(gpio16),
++      BCM6328_GROUP(gpio17),
++      BCM6328_GROUP(gpio18),
++      BCM6328_GROUP(gpio19),
++      BCM6328_GROUP(gpio20),
++      BCM6328_GROUP(gpio21),
++      BCM6328_GROUP(gpio22),
++      BCM6328_GROUP(gpio23),
++      BCM6328_GROUP(gpio24),
++      BCM6328_GROUP(gpio25),
++      BCM6328_GROUP(gpio26),
++      BCM6328_GROUP(gpio27),
++      BCM6328_GROUP(gpio28),
++      BCM6328_GROUP(gpio29),
++      BCM6328_GROUP(gpio30),
++      BCM6328_GROUP(gpio31),
++
++      BCM6328_GROUP(hsspi_cs1),
++      BCM6328_GROUP(usb_port1),
++};
++
++/* GPIO_MODE */
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++/* PINMUX_SEL */
++static const char * const serial_led_data_groups[] = {
++      "gpio6",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_act_led_groups[] = {
++      "gpio11",
++};
++
++static const char * const pcie_clkreq_groups[] = {
++      "gpio16",
++};
++
++static const char * const ephy0_act_led_groups[] = {
++      "gpio25",
++};
++
++static const char * const ephy1_act_led_groups[] = {
++      "gpio26",
++};
++
++static const char * const ephy2_act_led_groups[] = {
++      "gpio27",
++};
++
++static const char * const ephy3_act_led_groups[] = {
++      "gpio28",
++};
++
++static const char * const hsspi_cs1_groups[] = {
++      "hsspi_cs1"
++};
++
++static const char * const usb_host_port_groups[] = {
++      "usb_port1",
++};
++
++static const char * const usb_device_port_groups[] = {
++      "usb_port1",
++};
++
++#define BCM6328_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mode_val = 1,                          \
++      }
++
++#define BCM6328_MUX_FUN(n, mux)                               \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mux_val = mux,                         \
++      }
++
++static const struct bcm6328_function bcm6328_funcs[] = {
++      BCM6328_MODE_FUN(led),
++      BCM6328_MUX_FUN(serial_led_data, 2),
++      BCM6328_MUX_FUN(serial_led_clk, 2),
++      BCM6328_MUX_FUN(inet_act_led, 1),
++      BCM6328_MUX_FUN(pcie_clkreq, 2),
++      BCM6328_MUX_FUN(ephy0_act_led, 1),
++      BCM6328_MUX_FUN(ephy1_act_led, 1),
++      BCM6328_MUX_FUN(ephy2_act_led, 1),
++      BCM6328_MUX_FUN(ephy3_act_led, 1),
++      BCM6328_MUX_FUN(hsspi_cs1, 2),
++      BCM6328_MUX_FUN(usb_host_port, 1),
++      BCM6328_MUX_FUN(usb_device_port, 2),
++};
++
++static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6328_groups);
++}
++
++static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6328_groups[group].name;
++}
++
++static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6328_groups[group].pins;
++      *num_pins = bcm6328_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6328_funcs);
++}
++
++static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6328_funcs[selector].name;
++}
++
++static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6328_funcs[selector].groups;
++      *num_groups = bcm6328_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
++                          u32 mode, u32 mux)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (pin < 32) {
++              reg = __raw_readl(pctl->mode);
++              reg &= ~BIT(pin);
++              if (mode)
++                      reg |= BIT(pin);
++              __raw_writel(reg, pctl->mode);
++      }
++
++      reg = __raw_readl(pctl->mux[pin / 16]);
++      reg &= ~(3UL << ((pin % 16) * 2));
++      reg |= mux << ((pin % 16) * 2);
++      __raw_writel(reg, pctl->mux[pin / 16]);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
++      const struct bcm6328_function *f = &bcm6328_funcs[selector];
++
++      bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
++
++      return 0;
++}
++
++static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm6328_rmw_mux(pctl, offset, 0, 0);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6328_pctl_ops = {
++      .get_groups_count       = bcm6328_pinctrl_get_group_count,
++      .get_group_name         = bcm6328_pinctrl_get_group_name,
++      .get_group_pins         = bcm6328_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6328_pmx_ops = {
++      .get_functions_count    = bcm6328_pinctrl_get_func_count,
++      .get_function_name      = bcm6328_pinctrl_get_func_name,
++      .get_function_groups    = bcm6328_pinctrl_get_groups,
++      .set_mux                = bcm6328_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6328_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6328_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6328_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode, *mux;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
++      mux = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mux))
++              return PTR_ERR(mux);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++      pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
++      pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
++      pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6328_pctl_ops;
++      pctl->desc.pmxops = &bcm6328_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
++      pctl->desc.pins = bcm6328_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               &pctl->gpio, BCM6328_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6328_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6328-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6328_pinctrl_driver = {
++      .probe = bcm6328_pinctrl_probe,
++      .driver = {
++              .name = "bcm6328-pinctrl",
++              .of_match_table = bcm6328_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..6bac903
--- /dev/null
@@ -0,0 +1,49 @@
+From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:35:45 +0200
+Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6348 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
+ 1 file changed, 32 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
+@@ -0,0 +1,32 @@
++* Broadcom BCM6348 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6348-pinctrl".
++- reg: register Specifiers of dirout, dat, mode registers.
++- reg-names: Must be "dirout", "dat", "mode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@fffe0080 {
++      compatible = "brcm,bcm6348-pinctrl";
++      reg = <0xfffe0080 0x8>,
++            <0xfffe0088 0x8>,
++            <0xfffe0098 0x4>;
++      reg-names = "dirout", "dat", "mode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++group0                32-36   ext_mii, utopia, diag
++group1                22-31   ext_ephy, mii_snoop, mii_pccard,
++                      spi_master_uart, utopia, diag
++group2                16-21   pci, diag
++group3                8-15    ext_mii, utopia
++group4                0-7     ext_ephy, mii_snoop, legacy_led, diag
diff --git a/target/linux/bcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/bcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
new file mode 100644 (file)
index 0000000..b48723c
--- /dev/null
@@ -0,0 +1,431 @@
+From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:14:13 +0200
+Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
+
+Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
+up to ten gpios into fourteen potential functions. It does not allow
+muxing individual pins. Some functions require more than one group to be
+muxed to the same function.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
+ 3 files changed, 399 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6348
++      bool "BCM6348 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,2 +1,3 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
++obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
+@@ -0,0 +1,391 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/machine.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6348_NGPIO         37
++
++#define MAX_GROUP             4
++#define PINS_PER_GROUP                8
++#define PIN_TO_GROUP(pin)     (MAX_GROUP - ((pin) / PINS_PER_GROUP))
++#define GROUP_SHIFT(pin)      (PIN_TO_GROUP(pin) * 4)
++#define GROUP_MASK(pin)               (0xf << GROUP_SHIFT(pin))
++
++struct bcm6348_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6348_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++      unsigned int value;
++};
++
++struct bcm6348_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6348_PIN(a, b, group)              \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)(group),    \
++      }
++
++static const struct pinctrl_pin_desc bcm6348_pins[] = {
++      BCM6348_PIN(0, "gpio0", 4),
++      BCM6348_PIN(1, "gpio1", 4),
++      BCM6348_PIN(2, "gpio2", 4),
++      BCM6348_PIN(3, "gpio3", 4),
++      BCM6348_PIN(4, "gpio4", 4),
++      BCM6348_PIN(5, "gpio5", 4),
++      BCM6348_PIN(6, "gpio6", 4),
++      BCM6348_PIN(7, "gpio7", 4),
++      BCM6348_PIN(8, "gpio8", 3),
++      BCM6348_PIN(9, "gpio9", 3),
++      BCM6348_PIN(10, "gpio10", 3),
++      BCM6348_PIN(11, "gpio11", 3),
++      BCM6348_PIN(12, "gpio12", 3),
++      BCM6348_PIN(13, "gpio13", 3),
++      BCM6348_PIN(14, "gpio14", 3),
++      BCM6348_PIN(15, "gpio15", 3),
++      BCM6348_PIN(16, "gpio16", 2),
++      BCM6348_PIN(17, "gpio17", 2),
++      BCM6348_PIN(18, "gpio18", 2),
++      BCM6348_PIN(19, "gpio19", 2),
++      BCM6348_PIN(20, "gpio20", 2),
++      BCM6348_PIN(21, "gpio21", 2),
++      BCM6348_PIN(22, "gpio22", 1),
++      BCM6348_PIN(23, "gpio23", 1),
++      BCM6348_PIN(24, "gpio24", 1),
++      BCM6348_PIN(25, "gpio25", 1),
++      BCM6348_PIN(26, "gpio26", 1),
++      BCM6348_PIN(27, "gpio27", 1),
++      BCM6348_PIN(28, "gpio28", 1),
++      BCM6348_PIN(29, "gpio29", 1),
++      BCM6348_PIN(30, "gpio30", 1),
++      BCM6348_PIN(31, "gpio31", 1),
++      BCM6348_PIN(32, "gpio32", 0),
++      BCM6348_PIN(33, "gpio33", 0),
++      BCM6348_PIN(34, "gpio34", 0),
++      BCM6348_PIN(35, "gpio35", 0),
++      BCM6348_PIN(36, "gpio36", 0),
++};
++
++enum bcm6348_muxes {
++      BCM6348_MUX_GPIO = 0,
++      BCM6348_MUX_EXT_EPHY,
++      BCM6348_MUX_MII_SNOOP,
++      BCM6348_MUX_LEGACY_LED,
++      BCM6348_MUX_MII_PCCARD,
++      BCM6348_MUX_PCI,
++      BCM6348_MUX_SPI_MASTER_UART,
++      BCM6348_MUX_EXT_MII,
++      BCM6348_MUX_UTOPIA,
++      BCM6348_MUX_DIAG,
++};
++
++static unsigned group0_pins[] = {
++      32, 33, 34, 35, 36,
++};
++
++static unsigned group1_pins[] = {
++      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned group2_pins[] = {
++      16, 17, 18, 19, 20, 21,
++};
++
++static unsigned group3_pins[] = {
++      8, 9, 10, 11, 12, 13, 14, 15,
++};
++
++static unsigned group4_pins[] = {
++      0, 1, 2, 3, 4, 5, 6, 7,
++};
++
++#define BCM6348_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      } \
++
++static struct bcm6348_pingroup bcm6348_groups[] = {
++      BCM6348_GROUP(group0),
++      BCM6348_GROUP(group1),
++      BCM6348_GROUP(group2),
++      BCM6348_GROUP(group3),
++      BCM6348_GROUP(group4),
++};
++
++static const char * const ext_mii_groups[] = {
++      "group0",
++      "group3",
++};
++
++static const char * const ext_ephy_groups[] = {
++      "group1",
++      "group4"
++};
++
++static const char * const mii_snoop_groups[] = {
++      "group1",
++      "group4",
++};
++
++static const char * const legacy_led_groups[] = {
++      "group4",
++};
++
++static const char * const mii_pccard_groups[] = {
++      "group1",
++};
++
++static const char * const pci_groups[] = {
++      "group2",
++};
++
++static const char * const spi_master_uart_groups[] = {
++      "group1",
++};
++
++static const char * const utopia_groups[] = {
++      "group0",
++      "group1",
++      "group3",
++};
++
++static const char * const diag_groups[] = {
++      "group0",
++      "group1",
++      "group2",
++      "group4",
++};
++
++#define BCM6348_FUN(n, f)                             \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .value = BCM6348_MUX_##f,               \
++      }
++
++static const struct bcm6348_function bcm6348_funcs[] = {
++      BCM6348_FUN(ext_mii, EXT_MII),
++      BCM6348_FUN(ext_ephy, EXT_EPHY),
++      BCM6348_FUN(mii_snoop, MII_SNOOP),
++      BCM6348_FUN(legacy_led, LEGACY_LED),
++      BCM6348_FUN(mii_pccard, MII_PCCARD),
++      BCM6348_FUN(pci, PCI),
++      BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
++      BCM6348_FUN(utopia, UTOPIA),
++      BCM6348_FUN(diag, DIAG),
++};
++
++static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6348_groups);
++}
++
++static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6348_groups[group].name;
++}
++
++static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6348_groups[group].pins;
++      *num_pins = bcm6348_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6348_funcs);
++}
++
++static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6348_funcs[selector].name;
++}
++
++static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6348_funcs[selector].groups;
++      *num_groups = bcm6348_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++
++      reg = __raw_readl(pctl->mode);
++      reg &= ~mask;
++      reg |= val & mask;
++      __raw_writel(reg, pctl->mode);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
++      const struct bcm6348_function *f = &bcm6348_funcs[selector];
++      u32 mask, val;
++
++      /*
++       * pins n..(n+7) share the same group, so we only need to look at
++       * the first pin.
++       */
++      mask = GROUP_MASK(grp->pins[0]);
++      val = f->value << GROUP_SHIFT(grp->pins[0]);
++
++      bcm6348_rmw_mux(pctl, mask, val);
++
++      return 0;
++}
++
++static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      struct pin_desc *desc;
++      u32 mask;
++
++      /* don't reconfigure if already muxed */
++      desc = pin_desc_get(pctldev, offset);
++      if (desc->mux_usecount)
++              return 0;
++
++      mask = GROUP_MASK(offset);
++
++      /* disable all functions using this pin */
++      bcm6348_rmw_mux(pctl, mask, 0);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6348_pctl_ops = {
++      .get_groups_count       = bcm6348_pinctrl_get_group_count,
++      .get_group_name         = bcm6348_pinctrl_get_group_name,
++      .get_group_pins         = bcm6348_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6348_pmx_ops = {
++      .get_functions_count    = bcm6348_pinctrl_get_func_count,
++      .get_function_name      = bcm6348_pinctrl_get_func_name,
++      .get_function_groups    = bcm6348_pinctrl_get_groups,
++      .set_mux                = bcm6348_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6348_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6348_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6348_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      /* disable all muxes by default */
++      __raw_writel(0, pctl->mode);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6348_pctl_ops;
++      pctl->desc.pmxops = &bcm6348_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
++      pctl->desc.pins = bcm6348_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6348_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6348_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6348-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6348_pinctrl_driver = {
++      .probe = bcm6348_pinctrl_probe,
++      .driver = {
++              .name = "bcm6348-pinctrl",
++              .of_match_table = bcm6348_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..e8a7479
--- /dev/null
@@ -0,0 +1,61 @@
+From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:00 +0200
+Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6358 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
+ 1 file changed, 44 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
+@@ -0,0 +1,44 @@
++* Broadcom BCM6358 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6358-pinctrl".
++- reg: Register specifiers of dirout, dat registers.
++- reg-names: Must be "dirout", "dat".
++- brcm,gpiomode: Phandle to the shared gpiomode register.
++- gpio-controller: Identifies this node as a gpio-controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@fffe0080 {
++      compatible = "brcm,bcm6358-pinctrl";
++      reg = <0xfffe0080 0x8>,
++            <0xfffe0088 0x8>,
++            <0xfffe0098 0x4>;
++      reg-names = "dirout", "dat";
++      brcm,gpiomode = <&gpiomode>;
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++gpiomode: syscon@fffe0098 {
++      compatible = "brcm,bcm6358-gpiomode", "syscon";
++      reg = <0xfffe0098 0x4>;
++      native-endian;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++ebi_cs_grp    30-31           ebi_cs
++uart1_grp     28-31           uart1
++spi_cs_grp    32-33           spi_cs
++async_modem_grp       12-15           async_modem
++legacy_led_grp        9-15            legacy_led
++serial_led_grp        6-7             serial_led
++led_grp               0-3             led
++utopia_grp    12-15, 22-31    utopia
++pwm_syn_clk_grp       8               pwm_syn_clk
++sys_irq_grp   5               sys_irq
diff --git a/target/linux/bcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
new file mode 100644 (file)
index 0000000..87dc741
--- /dev/null
@@ -0,0 +1,436 @@
+From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:16:01 +0200
+Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
+
+Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
+functions onto the GPIO pins. It does not support configuring individual
+pins but only whole groups. These groups may overlap, and still require
+the directions to be set correctly in the GPIO register. In addition the
+functions register controls other, not directly mux related functions.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   8 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
+ 3 files changed, 402 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6358
++      bool "BCM6358 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++      select MFD_SYSCON
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
++obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
+@@ -0,0 +1,393 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/mfd/syscon.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/regmap.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++/* GPIO_MODE register */
++#define BCM6358_MODE_MUX_NONE         0
++
++/* overlays on gpio pins */
++#define BCM6358_MODE_MUX_EBI_CS               BIT(5)
++#define BCM6358_MODE_MUX_UART1                BIT(6)
++#define BCM6358_MODE_MUX_SPI_CS               BIT(7)
++#define BCM6358_MODE_MUX_ASYNC_MODEM  BIT(8)
++#define BCM6358_MODE_MUX_LEGACY_LED   BIT(9)
++#define BCM6358_MODE_MUX_SERIAL_LED   BIT(10)
++#define BCM6358_MODE_MUX_LED          BIT(11)
++#define BCM6358_MODE_MUX_UTOPIA               BIT(12)
++#define BCM6358_MODE_MUX_CLKRST               BIT(13)
++#define BCM6358_MODE_MUX_PWM_SYN_CLK  BIT(14)
++#define BCM6358_MODE_MUX_SYS_IRQ      BIT(15)
++
++#define BCM6358_NGPIO                 40
++
++struct bcm6358_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++
++      const u16 mode_val;
++
++      /* non-GPIO function muxes require the gpio direction to be set */
++      const u16 direction;
++};
++
++struct bcm6358_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++};
++
++struct bcm6358_pinctrl {
++      struct device *dev;
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      struct regmap_field *overlays;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)              \
++      {                                                       \
++              .number = a,                                    \
++              .name = b,                                      \
++              .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |  \
++                                   BCM6358_MODE_MUX_##bit2 |  \
++                                   BCM6358_MODE_MUX_##bit3),  \
++      }
++
++static const struct pinctrl_pin_desc bcm6358_pins[] = {
++      BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
++      BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
++      PINCTRL_PIN(4, "gpio4"),
++      BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
++      BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
++      BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
++      BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
++      BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
++      BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
++      BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
++      BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
++      BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
++      BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++};
++
++static unsigned ebi_cs_grp_pins[] = { 30, 31 };
++
++static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
++
++static unsigned spi_cs_grp_pins[] = { 32, 33 };
++
++static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
++
++static unsigned serial_led_grp_pins[] = { 6, 7 };
++
++static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
++
++static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
++
++static unsigned utopia_grp_pins[] = {
++      12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned pwm_syn_clk_grp_pins[] = { 8 };
++
++static unsigned sys_irq_grp_pins[] = { 5 };
++
++#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)                   \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++              .mode_val = BCM6358_MODE_MUX_##bit,             \
++              .direction = dir,                               \
++      }
++
++static const struct bcm6358_pingroup bcm6358_groups[] = {
++      BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
++      BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
++      BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
++      BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
++      BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
++      BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
++      BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
++      BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
++      BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
++      BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
++};
++
++static const char * const ebi_cs_groups[] = {
++      "ebi_cs_grp"
++};
++
++static const char * const uart1_groups[] = {
++      "uart1_grp"
++};
++
++static const char * const spi_cs_2_3_groups[] = {
++      "spi_cs_2_3_grp"
++};
++
++static const char * const async_modem_groups[] = {
++      "async_modem_grp"
++};
++
++static const char * const legacy_led_groups[] = {
++      "legacy_led_grp",
++};
++
++static const char * const serial_led_groups[] = {
++      "serial_led_grp",
++};
++
++static const char * const led_groups[] = {
++      "led_grp",
++};
++
++static const char * const clkrst_groups[] = {
++      "clkrst_grp",
++};
++
++static const char * const pwm_syn_clk_groups[] = {
++      "pwm_syn_clk_grp",
++};
++
++static const char * const sys_irq_groups[] = {
++      "sys_irq_grp",
++};
++
++#define BCM6358_FUN(n)                                        \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++      }
++
++static const struct bcm6358_function bcm6358_funcs[] = {
++      BCM6358_FUN(ebi_cs),
++      BCM6358_FUN(uart1),
++      BCM6358_FUN(spi_cs_2_3),
++      BCM6358_FUN(async_modem),
++      BCM6358_FUN(legacy_led),
++      BCM6358_FUN(serial_led),
++      BCM6358_FUN(led),
++      BCM6358_FUN(clkrst),
++      BCM6358_FUN(pwm_syn_clk),
++      BCM6358_FUN(sys_irq),
++};
++
++static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6358_groups);
++}
++
++static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6358_groups[group].name;
++}
++
++static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6358_groups[group].pins;
++      *num_pins = bcm6358_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6358_funcs);
++}
++
++static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6358_funcs[selector].name;
++}
++
++static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6358_funcs[selector].groups;
++      *num_groups = bcm6358_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
++      u32 val = grp->mode_val;
++      u32 mask = val;
++      unsigned pin;
++
++      for (pin = 0; pin < grp->num_pins; pin++)
++              mask |= (unsigned long)bcm6358_pins[pin].drv_data;
++
++      regmap_field_update_bits(pctl->overlays, mask, val);
++
++      for (pin = 0; pin < grp->num_pins; pin++) {
++              int hw_gpio = bcm6358_pins[pin].number;
++              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
++
++              if (grp->direction & BIT(pin))
++                      gc->direction_output(gc, hw_gpio % 32, 0);
++              else
++                      gc->direction_input(gc, hw_gpio % 32);
++      }
++
++      return 0;
++}
++
++static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      u32 mask;
++
++      mask = (unsigned long)bcm6358_pins[offset].drv_data;
++      if (!mask)
++              return 0;
++
++      /* disable all functions using this pin */
++      return regmap_field_update_bits(pctl->overlays, mask, 0);
++}
++
++static struct pinctrl_ops bcm6358_pctl_ops = {
++      .get_groups_count       = bcm6358_pinctrl_get_group_count,
++      .get_group_name         = bcm6358_pinctrl_get_group_name,
++      .get_group_pins         = bcm6358_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6358_pmx_ops = {
++      .get_functions_count    = bcm6358_pinctrl_get_func_count,
++      .get_function_name      = bcm6358_pinctrl_get_func_name,
++      .get_function_groups    = bcm6358_pinctrl_get_groups,
++      .set_mux                = bcm6358_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6358_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6358_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6358_pinctrl *pctl;
++      struct regmap *mode;
++      struct reg_field overlays = REG_FIELD(0, 0, 15);
++
++      if (pdev->dev.of_node)
++              mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
++                                                     "brcm,gpiomode");
++      else
++              mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
++
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
++      if (IS_ERR(pctl->overlays))
++              return PTR_ERR(pctl->overlays);
++
++      /* disable all muxes by default */
++      regmap_field_write(pctl->overlays, 0);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6358_pctl_ops;
++      pctl->desc.pmxops = &bcm6358_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
++      pctl->desc.pins = bcm6358_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6358_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6358_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6358-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6358_pinctrl_driver = {
++      .probe = bcm6358_pinctrl_probe,
++      .driver = {
++              .name = "bcm6358-pinctrl",
++              .of_match_table = bcm6358_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..9fc424c
--- /dev/null
@@ -0,0 +1,96 @@
+From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:18 +0200
+Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6362 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
+ 1 file changed, 79 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
+@@ -0,0 +1,79 @@
++* Broadcom BCM6362 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6362-pinctrl"
++- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
++- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6362-pinctrl";
++      reg = <0x10000080 0x8>,
++            <0x10000088 0x8>,
++            <0x10000090 0x4>,
++            <0x10000098 0x4>,
++            <0x1000009c 0x4>,
++            <0x100000b8 0x4>;
++      reg-names = "dirout", "dat", "led",
++                  "mode", "ctrl", "basemode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++gpio0         0               led, usb_device_led
++gpio1         1               led, sys_irq
++gpio2         2               led, serial_led_clk
++gpio3         3               led, serial_led_data
++gpio4         4               led, robosw_led_data
++gpio5         5               led, robosw_led_clk
++gpio6         6               led, robosw_led0
++gpio7         7               led, robosw_led1
++gpio8         8               led, inet_led
++gpio9         9               led, spi_cs2
++gpio10                10              led, spi_cs3
++gpio11                11              led, ntr_pulse
++gpio12                12              led, uart1_scts
++gpio13                13              led, uart1_srts
++gpio14                14              led, uart1_sdin
++gpio15                15              led, uart1_sdout
++gpio16                16              led, adsl_spi_miso
++gpio17                17              led, adsl_spi_mosi
++gpio18                18              led, adsl_spi_clk
++gpio19                19              led, adsl_spi_cs
++gpio20                20              led, ephy0_led
++gpio21                21              led, ephy1_led
++gpio22                22              led, ephy2_led
++gpio23                23              led, ephy3_led
++gpio24                24              ext_irq0
++gpio25                25              ext_irq1
++gpio26                26              ext_irq2
++gpio27                27              ext_irq3
++gpio28                28              -
++gpio29                29              -
++gpio30                30              -
++gpio31                31              -
++gpio32                32              wifi
++gpio33                33              wifi
++gpio34                34              wifi
++gpio35                35              wifi
++gpio36                36              wifi
++gpio37                37              wifi
++gpio38                38              wifi
++gpio39                39              wifi
++gpio40                40              wifi
++gpio41                41              wifi
++gpio42                42              wifi
++gpio43                43              wifi
++gpio44                44              wifi
++gpio45                45              wifi
++gpio46                46              wifi
++gpio47                47              wifi
++nand_grp      8, 12-23, 27    nand
diff --git a/target/linux/bcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..726a97f
--- /dev/null
@@ -0,0 +1,733 @@
+From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:17:20 +0200
+Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
+
+Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
+GPIO pins to the LED controller, to be available by the integrated
+wifi, or other functions. It also supports overlay groups, of which
+only NAND is documented.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
+ 3 files changed, 700 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
+       select MFD_SYSCON
++
++config PINCTRL_BCM6362
++      bool "BCM6362 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
++obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
+@@ -0,0 +1,692 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6362_NGPIO 48
++
++/* GPIO_BASEMODE register */
++#define BASEMODE_NAND BIT(2)
++
++enum bcm6362_pinctrl_reg {
++      BCM6362_LEDCTRL,
++      BCM6362_MODE,
++      BCM6362_CTRL,
++      BCM6362_BASEMODE,
++};
++
++struct bcm6362_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6362_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      enum bcm6362_pinctrl_reg reg;
++      u32 basemode_mask;
++};
++
++struct bcm6362_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *led;
++      void __iomem *mode;
++      void __iomem *ctrl;
++      void __iomem *basemode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6362_PIN(a, b, mask)                       \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)(mask),     \
++      }
++
++static const struct pinctrl_pin_desc bcm6362_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
++      BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
++      BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
++      BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
++      BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
++      BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
++      BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
++      BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
++      BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
++      BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
++      BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
++      BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++
++static unsigned nand_grp_pins[] = {
++      8, 12, 13, 14, 15, 16, 17,
++      18, 19, 20, 21, 22, 23, 27,
++};
++
++#define BCM6362_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      }
++
++static struct bcm6362_pingroup bcm6362_groups[] = {
++      BCM6362_GROUP(gpio0),
++      BCM6362_GROUP(gpio1),
++      BCM6362_GROUP(gpio2),
++      BCM6362_GROUP(gpio3),
++      BCM6362_GROUP(gpio4),
++      BCM6362_GROUP(gpio5),
++      BCM6362_GROUP(gpio6),
++      BCM6362_GROUP(gpio7),
++      BCM6362_GROUP(gpio8),
++      BCM6362_GROUP(gpio9),
++      BCM6362_GROUP(gpio10),
++      BCM6362_GROUP(gpio11),
++      BCM6362_GROUP(gpio12),
++      BCM6362_GROUP(gpio13),
++      BCM6362_GROUP(gpio14),
++      BCM6362_GROUP(gpio15),
++      BCM6362_GROUP(gpio16),
++      BCM6362_GROUP(gpio17),
++      BCM6362_GROUP(gpio18),
++      BCM6362_GROUP(gpio19),
++      BCM6362_GROUP(gpio20),
++      BCM6362_GROUP(gpio21),
++      BCM6362_GROUP(gpio22),
++      BCM6362_GROUP(gpio23),
++      BCM6362_GROUP(gpio24),
++      BCM6362_GROUP(gpio25),
++      BCM6362_GROUP(gpio26),
++      BCM6362_GROUP(gpio27),
++      BCM6362_GROUP(gpio28),
++      BCM6362_GROUP(gpio29),
++      BCM6362_GROUP(gpio30),
++      BCM6362_GROUP(gpio31),
++      BCM6362_GROUP(gpio32),
++      BCM6362_GROUP(gpio33),
++      BCM6362_GROUP(gpio34),
++      BCM6362_GROUP(gpio35),
++      BCM6362_GROUP(gpio36),
++      BCM6362_GROUP(gpio37),
++      BCM6362_GROUP(gpio38),
++      BCM6362_GROUP(gpio39),
++      BCM6362_GROUP(gpio40),
++      BCM6362_GROUP(gpio41),
++      BCM6362_GROUP(gpio42),
++      BCM6362_GROUP(gpio43),
++      BCM6362_GROUP(gpio44),
++      BCM6362_GROUP(gpio45),
++      BCM6362_GROUP(gpio46),
++      BCM6362_GROUP(gpio47),
++      BCM6362_GROUP(nand_grp),
++};
++
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio0",
++};
++
++static const char * const sys_irq_groups[] = {
++      "gpio1",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio2",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio3",
++};
++
++static const char * const robosw_led_data_groups[] = {
++      "gpio4",
++};
++
++static const char * const robosw_led_clk_groups[] = {
++      "gpio5",
++};
++
++static const char * const robosw_led0_groups[] = {
++      "gpio6",
++};
++
++static const char * const robosw_led1_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const spi_cs2_groups[] = {
++      "gpio9",
++};
++
++static const char * const spi_cs3_groups[] = {
++      "gpio10",
++};
++
++static const char * const ntr_pulse_groups[] = {
++      "gpio11",
++};
++
++static const char * const uart1_scts_groups[] = {
++      "gpio12",
++};
++
++static const char * const uart1_srts_groups[] = {
++      "gpio13",
++};
++
++static const char * const uart1_sdin_groups[] = {
++      "gpio14",
++};
++
++static const char * const uart1_sdout_groups[] = {
++      "gpio15",
++};
++
++static const char * const adsl_spi_miso_groups[] = {
++      "gpio16",
++};
++
++static const char * const adsl_spi_mosi_groups[] = {
++      "gpio17",
++};
++
++static const char * const adsl_spi_clk_groups[] = {
++      "gpio18",
++};
++
++static const char * const adsl_spi_cs_groups[] = {
++      "gpio19",
++};
++
++static const char * const ephy0_led_groups[] = {
++      "gpio20",
++};
++
++static const char * const ephy1_led_groups[] = {
++      "gpio21",
++};
++
++static const char * const ephy2_led_groups[] = {
++      "gpio22",
++};
++
++static const char * const ephy3_led_groups[] = {
++      "gpio23",
++};
++
++static const char * const ext_irq0_groups[] = {
++      "gpio24",
++};
++
++static const char * const ext_irq1_groups[] = {
++      "gpio25",
++};
++
++static const char * const ext_irq2_groups[] = {
++      "gpio26",
++};
++
++static const char * const ext_irq3_groups[] = {
++      "gpio27",
++};
++
++static const char * const wifi_groups[] = {
++      "gpio32",
++      "gpio33",
++      "gpio34",
++      "gpio35",
++      "gpio36",
++      "gpio37",
++      "gpio38",
++      "gpio39",
++      "gpio40",
++      "gpio41",
++      "gpio42",
++      "gpio43",
++      "gpio44",
++      "gpio45",
++      "gpio46",
++      "gpio47",
++};
++
++static const char * const nand_groups[] = {
++      "nand_grp",
++};
++
++#define BCM6362_LED_FUN(n)                            \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_LEDCTRL,                 \
++      }
++
++#define BCM6362_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_MODE,                    \
++      }
++
++#define BCM6362_CTRL_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_CTRL,                    \
++      }
++
++#define BCM6362_BASEMODE_FUN(n, mask)                 \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM6362_BASEMODE,                \
++              .basemode_mask = (mask),                \
++      }
++
++static const struct bcm6362_function bcm6362_funcs[] = {
++      BCM6362_LED_FUN(led),
++      BCM6362_MODE_FUN(usb_device_led),
++      BCM6362_MODE_FUN(sys_irq),
++      BCM6362_MODE_FUN(serial_led_clk),
++      BCM6362_MODE_FUN(serial_led_data),
++      BCM6362_MODE_FUN(robosw_led_data),
++      BCM6362_MODE_FUN(robosw_led_clk),
++      BCM6362_MODE_FUN(robosw_led0),
++      BCM6362_MODE_FUN(robosw_led1),
++      BCM6362_MODE_FUN(inet_led),
++      BCM6362_MODE_FUN(spi_cs2),
++      BCM6362_MODE_FUN(spi_cs3),
++      BCM6362_MODE_FUN(ntr_pulse),
++      BCM6362_MODE_FUN(uart1_scts),
++      BCM6362_MODE_FUN(uart1_srts),
++      BCM6362_MODE_FUN(uart1_sdin),
++      BCM6362_MODE_FUN(uart1_sdout),
++      BCM6362_MODE_FUN(adsl_spi_miso),
++      BCM6362_MODE_FUN(adsl_spi_mosi),
++      BCM6362_MODE_FUN(adsl_spi_clk),
++      BCM6362_MODE_FUN(adsl_spi_cs),
++      BCM6362_MODE_FUN(ephy0_led),
++      BCM6362_MODE_FUN(ephy1_led),
++      BCM6362_MODE_FUN(ephy2_led),
++      BCM6362_MODE_FUN(ephy3_led),
++      BCM6362_MODE_FUN(ext_irq0),
++      BCM6362_MODE_FUN(ext_irq1),
++      BCM6362_MODE_FUN(ext_irq2),
++      BCM6362_MODE_FUN(ext_irq3),
++      BCM6362_CTRL_FUN(wifi),
++      BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
++};
++
++static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6362_groups);
++}
++
++static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6362_groups[group].name;
++}
++
++static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6362_groups[group].pins;
++      *num_pins = bcm6362_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6362_funcs);
++}
++
++static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6362_funcs[selector].name;
++}
++
++static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6362_funcs[selector].groups;
++      *num_groups = bcm6362_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
++                          u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 tmp;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= val & mask;
++      __raw_writel(tmp, reg);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
++{
++      const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
++      u32 mask = BIT(pin % 32);
++
++      if (desc->drv_data)
++              bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
++
++      if (pin < 32) {
++              /* base mode 0 => gpio 1 => mux function */
++              bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
++
++              /* pins 0-23 might be muxed to led */
++              if (pin < 24)
++                      bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
++      } else {
++              /* ctrl reg 0 => wifi function 1 => gpio */
++              bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
++      }
++}
++
++static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
++      const struct bcm6362_function *f = &bcm6362_funcs[selector];
++      unsigned i;
++      void __iomem *reg;
++      u32 val, mask;
++
++      for (i = 0; i < grp->num_pins; i++)
++              bcm6362_set_gpio(pctl, grp->pins[i]);
++
++      switch (f->reg) {
++      case BCM6362_LEDCTRL:
++              reg = pctl->led;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM6362_MODE:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM6362_CTRL:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = 0;
++              break;
++      case BCM6362_BASEMODE:
++              reg = pctl->basemode;
++              mask = f->basemode_mask;
++              val = f->basemode_mask;
++              break;
++      default:
++              WARN_ON(1);
++              return -EINVAL;
++      }
++
++      bcm6362_rmw_mux(pctl, reg, mask, val);
++
++      return 0;
++}
++
++static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm6362_set_gpio(pctl, offset);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6362_pctl_ops = {
++      .get_groups_count       = bcm6362_pinctrl_get_group_count,
++      .get_group_name         = bcm6362_pinctrl_get_group_name,
++      .get_group_pins         = bcm6362_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6362_pmx_ops = {
++      .get_functions_count    = bcm6362_pinctrl_get_func_count,
++      .get_function_name      = bcm6362_pinctrl_get_func_name,
++      .get_function_groups    = bcm6362_pinctrl_get_groups,
++      .set_mux                = bcm6362_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6362_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6362_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6362_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *led, *mode, *ctrl, *basemode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
++      led = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(led))
++              return PTR_ERR(led);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
++      ctrl = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(ctrl))
++              return PTR_ERR(ctrl);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
++      basemode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->led = led;
++      pctl->mode = mode;
++      pctl->ctrl = ctrl;
++      pctl->basemode = basemode;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6362_pctl_ops;
++      pctl->desc.pmxops = &bcm6362_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
++      pctl->desc.pins = bcm6362_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6362_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6362_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6362-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6362_pinctrl_driver = {
++      .probe = bcm6362_pinctrl_probe,
++      .driver = {
++              .name = "bcm6362-pinctrl",
++              .of_match_table = bcm6362_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..e0a698f
--- /dev/null
@@ -0,0 +1,84 @@
+From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:36:51 +0200
+Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6368 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
+ 1 file changed, 67 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
+@@ -0,0 +1,67 @@
++* Broadcom BCM6368 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6368-pinctrl".
++- reg: Register specifiers of dirout, dat, mode registers.
++- reg-names: Must be "dirout", "dat", "mode".
++- brcm,gpiobasemode: Phandle to the gpio basemode register.
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6368-pinctrl";
++      reg = <0x10000080 0x08>,
++            <0x10000088 0x08>,
++            <0x10000098 0x04>;
++      reg-names = "dirout", "dat", "mode";
++      brcm,gpiobasemode = <&gpiobasemode>;
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++gpiobasemode: syscon@100000b8 {
++      compatible = "brcm,bcm6368-gpiobasemode", "syscon";
++      reg = <0x100000b8 4>;
++      native-endian;
++};
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       analog_afe0
++gpio1         1       analog_afe1
++gpio2         2       sys_irq
++gpio3         3       serial_led_data
++gpio4         4       serial_led_clk
++gpio5         5       inet_led
++gpio6         6       ephy0_led
++gpio7         7       ephy1_led
++gpio8         8       ephy2_led
++gpio9         9       ephy3_led
++gpio10                10      robosw_led_data
++gpio11                11      robosw_led_clk
++gpio12                12      robosw_led0
++gpio13                13      robosw_led1
++gpio14                14      usb_device_led
++gpio15                15      -
++gpio16                16      pci_req1
++gpio17                17      pci_gnt1
++gpio18                18      pci_intb
++gpio19                19      pci_req0
++gpio20                20      pci_gnt0
++gpio21                21      -
++gpio22                22      pcmcia_cd1
++gpio23                23      pcmcia_cd2
++gpio24                24      pcmcia_vs1
++gpio25                25      pcmcia_vs2
++gpio26                26      ebi_cs2
++gpio27                27      ebi_cs3
++gpio28                28      spi_cs2
++gpio29                29      spi_cs3
++gpio30                30      spi_cs4
++gpio31                31      spi_cs5
++uart1_grp     30-33   uart1
diff --git a/target/linux/bcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
new file mode 100644 (file)
index 0000000..6a9b9e0
--- /dev/null
@@ -0,0 +1,620 @@
+From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:18:25 +0200
+Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
+
+Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
+GPIOs onto alternative functions. Not all are documented.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |  15 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
+ 3 files changed, 589 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
+       select PINCONF
+       select PINCTRL_BCM63XX
+       select GENERIC_PINCONF
++
++config PINCTRL_BCM6368
++      bool "BCM6368 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++      select MFD_SYSCON
++
++config PINCTRL_BCM63268
++      bool "BCM63268 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+ obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
++obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
+@@ -0,0 +1,573 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/bitops.h>
++#include <linux/kernel.h>
++#include <linux/gpio.h>
++#include <linux/mfd/syscon.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_gpio.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6368_NGPIO 38
++
++#define BCM6368_BASEMODE_MASK 0x7
++#define BCM6368_BASEMODE_GPIO 0x0
++#define BCM6368_BASEMODE_UART1        0x1
++
++struct bcm6368_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6368_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned dir_out:16;
++      unsigned basemode:3;
++};
++
++struct bcm6368_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      struct regmap_field *overlay;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM6368_BASEMODE_PIN(a, b)            \
++      {                                       \
++              .number = a,                    \
++              .name = b,                      \
++              .drv_data = (void *)true        \
++      }
++
++static const struct pinctrl_pin_desc bcm6368_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      BCM6368_BASEMODE_PIN(30, "gpio30"),
++      BCM6368_BASEMODE_PIN(31, "gpio31"),
++      BCM6368_BASEMODE_PIN(32, "gpio32"),
++      BCM6368_BASEMODE_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
++
++#define BCM6368_GROUP(n)                              \
++      {                                               \
++              .name = #n,                             \
++              .pins = n##_pins,                       \
++              .num_pins = ARRAY_SIZE(n##_pins),       \
++      }
++
++static struct bcm6368_pingroup bcm6368_groups[] = {
++      BCM6368_GROUP(gpio0),
++      BCM6368_GROUP(gpio1),
++      BCM6368_GROUP(gpio2),
++      BCM6368_GROUP(gpio3),
++      BCM6368_GROUP(gpio4),
++      BCM6368_GROUP(gpio5),
++      BCM6368_GROUP(gpio6),
++      BCM6368_GROUP(gpio7),
++      BCM6368_GROUP(gpio8),
++      BCM6368_GROUP(gpio9),
++      BCM6368_GROUP(gpio10),
++      BCM6368_GROUP(gpio11),
++      BCM6368_GROUP(gpio12),
++      BCM6368_GROUP(gpio13),
++      BCM6368_GROUP(gpio14),
++      BCM6368_GROUP(gpio15),
++      BCM6368_GROUP(gpio16),
++      BCM6368_GROUP(gpio17),
++      BCM6368_GROUP(gpio18),
++      BCM6368_GROUP(gpio19),
++      BCM6368_GROUP(gpio20),
++      BCM6368_GROUP(gpio21),
++      BCM6368_GROUP(gpio22),
++      BCM6368_GROUP(gpio23),
++      BCM6368_GROUP(gpio24),
++      BCM6368_GROUP(gpio25),
++      BCM6368_GROUP(gpio26),
++      BCM6368_GROUP(gpio27),
++      BCM6368_GROUP(gpio28),
++      BCM6368_GROUP(gpio29),
++      BCM6368_GROUP(gpio30),
++      BCM6368_GROUP(gpio31),
++      BCM6368_GROUP(uart1_grp),
++};
++
++static const char * const analog_afe_0_groups[] = {
++      "gpio0",
++};
++
++static const char * const analog_afe_1_groups[] = {
++      "gpio1",
++};
++
++static const char * const sys_irq_groups[] = {
++      "gpio2",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio3",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio4",
++};
++
++static const char * const inet_led_groups[] = {
++      "gpio5",
++};
++
++static const char * const ephy0_led_groups[] = {
++      "gpio6",
++};
++
++static const char * const ephy1_led_groups[] = {
++      "gpio7",
++};
++
++static const char * const ephy2_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const ephy3_led_groups[] = {
++      "gpio9",
++};
++
++static const char * const robosw_led_data_groups[] = {
++      "gpio10",
++};
++
++static const char * const robosw_led_clk_groups[] = {
++      "gpio11",
++};
++
++static const char * const robosw_led0_groups[] = {
++      "gpio12",
++};
++
++static const char * const robosw_led1_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio14",
++};
++
++static const char * const pci_req1_groups[] = {
++      "gpio16",
++};
++
++static const char * const pci_gnt1_groups[] = {
++      "gpio17",
++};
++
++static const char * const pci_intb_groups[] = {
++      "gpio18",
++};
++
++static const char * const pci_req0_groups[] = {
++      "gpio19",
++};
++
++static const char * const pci_gnt0_groups[] = {
++      "gpio20",
++};
++
++static const char * const pcmcia_cd1_groups[] = {
++      "gpio22",
++};
++
++static const char * const pcmcia_cd2_groups[] = {
++      "gpio23",
++};
++
++static const char * const pcmcia_vs1_groups[] = {
++      "gpio24",
++};
++
++static const char * const pcmcia_vs2_groups[] = {
++      "gpio25",
++};
++
++static const char * const ebi_cs2_groups[] = {
++      "gpio26",
++};
++
++static const char * const ebi_cs3_groups[] = {
++      "gpio27",
++};
++
++static const char * const spi_cs2_groups[] = {
++      "gpio28",
++};
++
++static const char * const spi_cs3_groups[] = {
++      "gpio29",
++};
++
++static const char * const spi_cs4_groups[] = {
++      "gpio30",
++};
++
++static const char * const spi_cs5_groups[] = {
++      "gpio31",
++};
++
++static const char * const uart1_groups[] = {
++      "uart1_grp",
++};
++
++#define BCM6368_FUN(n, out)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .dir_out = out,                         \
++      }
++
++#define BCM6368_BASEMODE_FUN(n, val, out)             \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .basemode = BCM6368_BASEMODE_##val,     \
++              .dir_out = out,                         \
++      }
++
++static const struct bcm6368_function bcm6368_funcs[] = {
++      BCM6368_FUN(analog_afe_0, 1),
++      BCM6368_FUN(analog_afe_1, 1),
++      BCM6368_FUN(sys_irq, 1),
++      BCM6368_FUN(serial_led_data, 1),
++      BCM6368_FUN(serial_led_clk, 1),
++      BCM6368_FUN(inet_led, 1),
++      BCM6368_FUN(ephy0_led, 1),
++      BCM6368_FUN(ephy1_led, 1),
++      BCM6368_FUN(ephy2_led, 1),
++      BCM6368_FUN(ephy3_led, 1),
++      BCM6368_FUN(robosw_led_data, 1),
++      BCM6368_FUN(robosw_led_clk, 1),
++      BCM6368_FUN(robosw_led0, 1),
++      BCM6368_FUN(robosw_led1, 1),
++      BCM6368_FUN(usb_device_led, 1),
++      BCM6368_FUN(pci_req1, 0),
++      BCM6368_FUN(pci_gnt1, 0),
++      BCM6368_FUN(pci_intb, 0),
++      BCM6368_FUN(pci_req0, 0),
++      BCM6368_FUN(pci_gnt0, 0),
++      BCM6368_FUN(pcmcia_cd1, 0),
++      BCM6368_FUN(pcmcia_cd2, 0),
++      BCM6368_FUN(pcmcia_vs1, 0),
++      BCM6368_FUN(pcmcia_vs2, 0),
++      BCM6368_FUN(ebi_cs2, 1),
++      BCM6368_FUN(ebi_cs3, 1),
++      BCM6368_FUN(spi_cs2, 1),
++      BCM6368_FUN(spi_cs3, 1),
++      BCM6368_FUN(spi_cs4, 1),
++      BCM6368_FUN(spi_cs5, 1),
++      BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
++};
++
++static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6368_groups);
++}
++
++static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6368_groups[group].name;
++}
++
++static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6368_groups[group].pins;
++      *num_pins = bcm6368_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6368_funcs);
++}
++
++static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6368_funcs[selector].name;
++}
++
++static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6368_funcs[selector].groups;
++      *num_groups = bcm6368_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
++                          u32 mask, u32 val)
++{
++      u32 tmp;
++
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= (val & mask);
++      __raw_writel(tmp, reg);
++}
++
++static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
++      const struct bcm6368_function *fun = &bcm6368_funcs[selector];
++      unsigned long flags;
++      int i, pin;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (fun->basemode) {
++              u32 mask = 0;
++
++              for (i = 0; i < grp->num_pins; i++) {
++                      pin = grp->pins[i];
++                      if (pin < 32)
++                              mask |= BIT(pin);
++              }
++
++              bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
++              regmap_field_write(pctl->overlay, fun->basemode);
++      } else {
++              pin = grp->pins[0];
++
++              if (bcm6368_pins[pin].drv_data)
++                      regmap_field_write(pctl->overlay,
++                                         BCM6368_BASEMODE_GPIO);
++
++              bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
++      }
++      spin_unlock_irqrestore(&pctl->lock, flags);
++
++      for (pin = 0; pin < grp->num_pins; pin++) {
++              int hw_gpio = bcm6368_pins[pin].number;
++              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
++
++              if (fun->dir_out & BIT(pin))
++                      gc->direction_output(gc, hw_gpio % 32, 0);
++              else
++                      gc->direction_input(gc, hw_gpio % 32);
++      }
++
++      return 0;
++}
++
++static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      unsigned long flags;
++
++      if (offset >= 32 && !bcm6368_pins[offset].drv_data)
++              return 0;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      /* disable all functions using this pin */
++      if (offset < 32)
++              bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
++
++      if (bcm6368_pins[offset].drv_data)
++              regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6368_pctl_ops = {
++      .get_groups_count       = bcm6368_pinctrl_get_group_count,
++      .get_group_name         = bcm6368_pinctrl_get_group_name,
++      .get_group_pins         = bcm6368_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6368_pmx_ops = {
++      .get_functions_count    = bcm6368_pinctrl_get_func_count,
++      .get_function_name      = bcm6368_pinctrl_get_func_name,
++      .get_function_groups    = bcm6368_pinctrl_get_groups,
++      .set_mux                = bcm6368_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6368_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6368_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6368_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode;
++      struct regmap *basemode;
++      struct reg_field overlay = REG_FIELD(0, 0, 3);
++
++      if (pdev->dev.of_node)
++              basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
++                                                         "brcm,gpiobasemode");
++      else
++              basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
++
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
++      if (IS_ERR(pctl->overlay))
++              return PTR_ERR(pctl->overlay);
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      /* disable all muxes by default */
++      __raw_writel(0, pctl->mode);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6368_pctl_ops;
++      pctl->desc.pmxops = &bcm6368_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
++      pctl->desc.pins = bcm6368_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6368_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6368_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6368-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6368_pinctrl_driver = {
++      .probe = bcm6368_pinctrl_probe,
++      .driver = {
++              .name = "bcm6368-pinctrl",
++              .of_match_table = bcm6368_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
new file mode 100644 (file)
index 0000000..ffe842f
--- /dev/null
@@ -0,0 +1,106 @@
+From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:37:08 +0200
+Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in the BCM63268
+family SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
+ 1 file changed, 88 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
+@@ -0,0 +1,88 @@
++* Broadcom BCM63268 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6362-pinctrl".
++- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
++- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
++- gpio-controller: Identifies this node as a GPIO controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@100000c0 {
++      compatible = "brcm,bcm63268-pinctrl";
++      reg = <0x100000c0 0x8>,
++            <0x100000c8 0x8>,
++            <0x100000d0 0x4>,
++            <0x100000d8 0x4>,
++            <0x100000dc 0x4>,
++            <0x100000f8 0x4>;
++      reg-names = "dirout", "dat", "led", "mode",
++                  "ctrl", "basemode";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++Available pins/groups and functions:
++
++name          pins            functions
++-----------------------------------------------------------
++gpio0         0               led, serial_led_clk
++gpio1         1               led, serial_led_data
++gpio2         2               led,
++gpio3         3               led,
++gpio4         4               led,
++gpio5         5               led,
++gpio6         6               led,
++gpio7         7               led,
++gpio8         8               led, hsspi_cs6
++gpio9         9               led, hsspi_cs7
++gpio10                10              led, uart1_scts
++gpio11                11              led, uart1_srts
++gpio12                12              led, uart1_sdin
++gpio13                13              led, uart1_sdout
++gpio14                14              led, ntr_pulse_in
++gpio15                15              led, dsl_ntr_pulse_out
++gpio16                16              led, hsspi_cs4
++gpio17                17              led, hsspi_cs5
++gpio18                18              led, adsl_spi_miso
++gpio19                19              led, adsl_spi_mosi
++gpio20                20              led,
++gpio21                21              led,
++gpio22                22              led, vreg_clk
++gpio23                23              led, pcie_clkreq_b
++gpio24                24              uart1_scts
++gpio25                25              uart1_srts
++gpio26                26              uart1_sdin
++gpio27                27              uart1_sdout
++gpio28                28              ntr_pulse_in
++gpio29                29              dsl_ntr_pulse_out
++gpio30                30              switch_led_clk
++gpio31                31              switch_led_data
++gpio32                32              wifi
++gpio33                33              wifi
++gpio34                34              wifi
++gpio35                35              wifi
++gpio36                36              wifi
++gpio37                37              wifi
++gpio38                38              wifi
++gpio39                39              wifi
++gpio40                40              wifi
++gpio41                41              wifi
++gpio42                42              wifi
++gpio43                43              wifi
++gpio44                44              wifi
++gpio45                45              wifi
++gpio46                46              wifi
++gpio47                47              wifi
++gpio48                48              wifi
++gpio49                49              wifi
++gpio50                50              wifi
++gpio51                51              wifi
++nand_grp      2-7,24-31       nand
++dect_pd_grp   8-9             dect_pd
++vdsl_phy0_grp 10-11           vdsl_phy0
++vdsl_phy1_grp 12-13           vdsl_phy1
++vdsl_phy2_grp 24-25           vdsl_phy2
++vdsl_phy3_grp 26-27           vdsl_phy3
diff --git a/target/linux/bcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..089d14e
--- /dev/null
@@ -0,0 +1,736 @@
+From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:19:12 +0200
+Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
+
+Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
+to different functions. Depending on the mux, these are either single
+pin configurations or whole pin groups.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Makefile           |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
+ 2 files changed, 711 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
+
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)  += pinctrl
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+ obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
+ obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
++obj-$(CONFIG_PINCTRL_BCM63268)        += pinctrl-bcm63268.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
+@@ -0,0 +1,710 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM63268_NGPIO                        52
++
++/* GPIO_BASEMODE register */
++#define BASEMODE_NAND                 BIT(2) /* GPIOs 2-7, 24-31 */
++#define BASEMODE_GPIO35                       BIT(4) /* GPIO 35 */
++#define BASEMODE_DECTPD                       BIT(5) /* GPIOs 8/9 */
++#define BASEMODE_VDSL_PHY_0           BIT(6) /* GPIOs 10/11 */
++#define BASEMODE_VDSL_PHY_1           BIT(7) /* GPIOs 12/13 */
++#define BASEMODE_VDSL_PHY_2           BIT(8) /* GPIOs 24/25 */
++#define BASEMODE_VDSL_PHY_3           BIT(9) /* GPIOs 26/27 */
++
++enum bcm63268_pinctrl_reg {
++      BCM63268_LEDCTRL,
++      BCM63268_MODE,
++      BCM63268_CTRL,
++      BCM63268_BASEMODE,
++};
++
++struct bcm63268_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm63268_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      enum bcm63268_pinctrl_reg reg;
++      u32 mask;
++};
++
++struct bcm63268_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *led;
++      void __iomem *mode;
++      void __iomem *ctrl;
++      void __iomem *basemode;
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++#define BCM63268_PIN(a, b, basemode)                  \
++      {                                               \
++              .number = a,                            \
++              .name = b,                              \
++              .drv_data = (void *)(basemode)          \
++      }
++
++static const struct pinctrl_pin_desc bcm63268_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
++      BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
++      BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
++      BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
++      BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
++      BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
++      BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
++      BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
++      BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
++      BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
++      BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
++      BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
++      BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
++      BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
++      BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
++      BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
++      BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
++      BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
++      BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++      PINCTRL_PIN(48, "gpio48"),
++      PINCTRL_PIN(49, "gpio49"),
++      PINCTRL_PIN(50, "gpio50"),
++      PINCTRL_PIN(51, "gpio51"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++static unsigned gpio48_pins[] = { 48 };
++static unsigned gpio49_pins[] = { 49 };
++static unsigned gpio50_pins[] = { 50 };
++static unsigned gpio51_pins[] = { 51 };
++
++static unsigned nand_grp_pins[] = {
++      2, 3, 4, 5, 6, 7, 24,
++      25, 26, 27, 28, 29, 30, 31,
++};
++
++static unsigned dectpd_grp_pins[] = { 8, 9 };
++static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
++static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
++static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
++static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
++
++#define BCM63268_GROUP(n)                                     \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm63268_pingroup bcm63268_groups[] = {
++      BCM63268_GROUP(gpio0),
++      BCM63268_GROUP(gpio1),
++      BCM63268_GROUP(gpio2),
++      BCM63268_GROUP(gpio3),
++      BCM63268_GROUP(gpio4),
++      BCM63268_GROUP(gpio5),
++      BCM63268_GROUP(gpio6),
++      BCM63268_GROUP(gpio7),
++      BCM63268_GROUP(gpio8),
++      BCM63268_GROUP(gpio9),
++      BCM63268_GROUP(gpio10),
++      BCM63268_GROUP(gpio11),
++      BCM63268_GROUP(gpio12),
++      BCM63268_GROUP(gpio13),
++      BCM63268_GROUP(gpio14),
++      BCM63268_GROUP(gpio15),
++      BCM63268_GROUP(gpio16),
++      BCM63268_GROUP(gpio17),
++      BCM63268_GROUP(gpio18),
++      BCM63268_GROUP(gpio19),
++      BCM63268_GROUP(gpio20),
++      BCM63268_GROUP(gpio21),
++      BCM63268_GROUP(gpio22),
++      BCM63268_GROUP(gpio23),
++      BCM63268_GROUP(gpio24),
++      BCM63268_GROUP(gpio25),
++      BCM63268_GROUP(gpio26),
++      BCM63268_GROUP(gpio27),
++      BCM63268_GROUP(gpio28),
++      BCM63268_GROUP(gpio29),
++      BCM63268_GROUP(gpio30),
++      BCM63268_GROUP(gpio31),
++      BCM63268_GROUP(gpio32),
++      BCM63268_GROUP(gpio33),
++      BCM63268_GROUP(gpio34),
++      BCM63268_GROUP(gpio35),
++      BCM63268_GROUP(gpio36),
++      BCM63268_GROUP(gpio37),
++      BCM63268_GROUP(gpio38),
++      BCM63268_GROUP(gpio39),
++      BCM63268_GROUP(gpio40),
++      BCM63268_GROUP(gpio41),
++      BCM63268_GROUP(gpio42),
++      BCM63268_GROUP(gpio43),
++      BCM63268_GROUP(gpio44),
++      BCM63268_GROUP(gpio45),
++      BCM63268_GROUP(gpio46),
++      BCM63268_GROUP(gpio47),
++      BCM63268_GROUP(gpio48),
++      BCM63268_GROUP(gpio49),
++      BCM63268_GROUP(gpio50),
++      BCM63268_GROUP(gpio51),
++
++      /* multi pin groups */
++      BCM63268_GROUP(nand_grp),
++      BCM63268_GROUP(dectpd_grp),
++      BCM63268_GROUP(vdsl_phy0_grp),
++      BCM63268_GROUP(vdsl_phy1_grp),
++      BCM63268_GROUP(vdsl_phy2_grp),
++      BCM63268_GROUP(vdsl_phy3_grp),
++};
++
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio0",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio1",
++};
++
++static const char * const hsspi_cs4_groups[] = {
++      "gpio16",
++};
++
++static const char * const hsspi_cs5_groups[] = {
++      "gpio17",
++};
++
++static const char * const hsspi_cs6_groups[] = {
++      "gpio8",
++};
++
++static const char * const hsspi_cs7_groups[] = {
++      "gpio9",
++};
++
++static const char * const uart1_scts_groups[] = {
++      "gpio10",
++      "gpio24",
++};
++
++static const char * const uart1_srts_groups[] = {
++      "gpio11",
++      "gpio25",
++};
++
++static const char * const uart1_sdin_groups[] = {
++      "gpio12",
++      "gpio26",
++};
++
++static const char * const uart1_sdout_groups[] = {
++      "gpio13",
++      "gpio27",
++};
++
++static const char * const ntr_pulse_in_groups[] = {
++      "gpio14",
++      "gpio28",
++};
++
++static const char * const dsl_ntr_pulse_out_groups[] = {
++      "gpio15",
++      "gpio29",
++};
++
++static const char * const adsl_spi_miso_groups[] = {
++      "gpio18",
++};
++
++static const char * const adsl_spi_mosi_groups[] = {
++      "gpio19",
++};
++
++static const char * const vreg_clk_groups[] = {
++      "gpio22",
++};
++
++static const char * const pcie_clkreq_b_groups[] = {
++      "gpio23",
++};
++
++static const char * const switch_led_clk_groups[] = {
++      "gpio30",
++};
++
++static const char * const switch_led_data_groups[] = {
++      "gpio31",
++};
++
++static const char * const wifi_groups[] = {
++      "gpio32",
++      "gpio33",
++      "gpio34",
++      "gpio35",
++      "gpio36",
++      "gpio37",
++      "gpio38",
++      "gpio39",
++      "gpio40",
++      "gpio41",
++      "gpio42",
++      "gpio43",
++      "gpio44",
++      "gpio45",
++      "gpio46",
++      "gpio47",
++      "gpio48",
++      "gpio49",
++      "gpio50",
++      "gpio51",
++};
++
++static const char * const nand_groups[] = {
++      "nand_grp",
++};
++
++static const char * const dectpd_groups[] = {
++      "dectpd_grp",
++};
++
++static const char * const vdsl_phy_override_0_groups[] = {
++      "vdsl_phy_override_0_grp",
++};
++
++static const char * const vdsl_phy_override_1_groups[] = {
++      "vdsl_phy_override_1_grp",
++};
++
++static const char * const vdsl_phy_override_2_groups[] = {
++      "vdsl_phy_override_2_grp",
++};
++
++static const char * const vdsl_phy_override_3_groups[] = {
++      "vdsl_phy_override_3_grp",
++};
++
++#define BCM63268_LED_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_LEDCTRL,                \
++      }
++
++#define BCM63268_MODE_FUN(n)                          \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_MODE,                   \
++      }
++
++#define BCM63268_CTRL_FUN(n)                          \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_CTRL,                   \
++      }
++
++#define BCM63268_BASEMODE_FUN(n, val)                 \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .reg = BCM63268_BASEMODE,               \
++              .mask = val,                            \
++      }
++
++static const struct bcm63268_function bcm63268_funcs[] = {
++      BCM63268_LED_FUN(led),
++      BCM63268_MODE_FUN(serial_led_clk),
++      BCM63268_MODE_FUN(serial_led_data),
++      BCM63268_MODE_FUN(hsspi_cs6),
++      BCM63268_MODE_FUN(hsspi_cs7),
++      BCM63268_MODE_FUN(uart1_scts),
++      BCM63268_MODE_FUN(uart1_srts),
++      BCM63268_MODE_FUN(uart1_sdin),
++      BCM63268_MODE_FUN(uart1_sdout),
++      BCM63268_MODE_FUN(ntr_pulse_in),
++      BCM63268_MODE_FUN(dsl_ntr_pulse_out),
++      BCM63268_MODE_FUN(hsspi_cs4),
++      BCM63268_MODE_FUN(hsspi_cs5),
++      BCM63268_MODE_FUN(adsl_spi_miso),
++      BCM63268_MODE_FUN(adsl_spi_mosi),
++      BCM63268_MODE_FUN(vreg_clk),
++      BCM63268_MODE_FUN(pcie_clkreq_b),
++      BCM63268_MODE_FUN(switch_led_clk),
++      BCM63268_MODE_FUN(switch_led_data),
++      BCM63268_CTRL_FUN(wifi),
++      BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
++      BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
++      BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
++};
++
++static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm63268_groups);
++}
++
++static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                 unsigned group)
++{
++      return bcm63268_groups[group].name;
++}
++
++static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                         unsigned group,
++                                         const unsigned **pins,
++                                         unsigned *num_pins)
++{
++      *pins = bcm63268_groups[group].pins;
++      *num_pins = bcm63268_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm63268_funcs);
++}
++
++static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                                unsigned selector)
++{
++      return bcm63268_funcs[selector].name;
++}
++
++static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                     unsigned selector,
++                                     const char * const **groups,
++                                     unsigned * const num_groups)
++{
++      *groups = bcm63268_funcs[selector].groups;
++      *num_groups = bcm63268_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
++                           u32 mask, u32 val)
++{
++      unsigned long flags;
++      u32 tmp;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      tmp = __raw_readl(reg);
++      tmp &= ~mask;
++      tmp |= val;
++      __raw_writel(tmp, reg);
++
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
++{
++      const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
++      u32 basemode = (unsigned long)desc->drv_data;
++      u32 mask = BIT(pin % 32);
++
++      if (basemode)
++              bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
++
++      if (pin < 32) {
++              /* base mode: 0 => gpio, 1 => mux function */
++              bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
++
++              /* pins 0-23 might be muxed to led */
++              if (pin < 24)
++                      bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
++      } else if (pin < 52) {
++              /* ctrl reg: 0 => wifi function, 1 => gpio */
++              bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
++      }
++}
++
++static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                  unsigned selector, unsigned group)
++{
++      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
++      const struct bcm63268_function *f = &bcm63268_funcs[selector];
++      unsigned i;
++      void __iomem *reg;
++      u32 val, mask;
++
++      for (i = 0; i < grp->num_pins; i++)
++              bcm63268_set_gpio(pctl, grp->pins[i]);
++
++      switch (f->reg) {
++      case BCM63268_LEDCTRL:
++              reg = pctl->led;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM63268_MODE:
++              reg = pctl->mode;
++              mask = BIT(grp->pins[0]);
++              val = BIT(grp->pins[0]);
++              break;
++      case BCM63268_CTRL:
++              reg = pctl->ctrl;
++              mask = BIT(grp->pins[0]);
++              val = 0;
++              break;
++      case BCM63268_BASEMODE:
++              reg = pctl->basemode;
++              mask = f->mask;
++              val = f->mask;
++              break;
++      default:
++              WARN_ON(1);
++              return -EINVAL;
++      }
++
++      bcm63268_rmw_mux(pctl, reg, mask, val);
++
++      return 0;
++}
++
++static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                      struct pinctrl_gpio_range *range,
++                                      unsigned offset)
++{
++      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      bcm63268_set_gpio(pctl, offset);
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm63268_pctl_ops = {
++      .get_groups_count       = bcm63268_pinctrl_get_group_count,
++      .get_group_name         = bcm63268_pinctrl_get_group_name,
++      .get_group_pins         = bcm63268_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm63268_pmx_ops = {
++      .get_functions_count    = bcm63268_pinctrl_get_func_count,
++      .get_function_name      = bcm63268_pinctrl_get_func_name,
++      .get_function_groups    = bcm63268_pinctrl_get_groups,
++      .set_mux                = bcm63268_pinctrl_set_mux,
++      .gpio_request_enable    = bcm63268_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm63268_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm63268_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *led, *mode, *ctrl, *basemode;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
++      led = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(led))
++              return PTR_ERR(led);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
++      ctrl = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(ctrl))
++              return PTR_ERR(ctrl);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
++      basemode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(basemode))
++              return PTR_ERR(basemode);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->led = led;
++      pctl->mode = mode;
++      pctl->ctrl = ctrl;
++      pctl->basemode = basemode;
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm63268_pctl_ops;
++      pctl->desc.pmxops = &bcm63268_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
++      pctl->desc.pins = bcm63268_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM63268_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm63268_pinctrl_match[] = {
++      { .compatible = "brcm,bcm63268-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm63268_pinctrl_driver = {
++      .probe = bcm63268_pinctrl_probe,
++      .driver = {
++              .name = "bcm63268-pinctrl",
++              .of_match_table = bcm63268_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/bcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
new file mode 100644 (file)
index 0000000..13225be
--- /dev/null
@@ -0,0 +1,134 @@
+From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 26 Nov 2017 12:07:31 +0100
+Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
+ controllers
+
+For dual role gpio and pincontrol controller, the device registration
+path is often:
+
+  pinctrl_register(...);
+  gpiochip_add_data(...);
+  gpiochip_add_pin_range(...);
+
+If the device tree node has any gpio-hogs, the code will try to apply them
+in the gpiochip_add_data step, but fail as they cannot be requested, as the
+ranges are missing. But we also cannot first add the pinranges, as the
+appropriate data structures are only initialized in gpiochip_add_data.
+
+To fix this, defer gpio-hogs to the time pin ranges get added instead of
+directly at chip request time, if the gpio-chip has a request method.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+
+ drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
+ drivers/gpio/gpiolib.c    |  5 +++--
+ drivers/gpio/gpiolib.h    |  8 ++++++++
+ 3 files changed, 26 insertions(+), 7 deletions(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -363,12 +363,15 @@ static struct gpio_desc *of_parse_own_gp
+ /**
+  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
+  * @chip:     gpio chip to act on
++ * @start:    first gpio to check
++ * @num:      number of gpios to check
+  *
+- * This is only used by of_gpiochip_add to request/set GPIO initial
+- * configuration.
++ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
++ * gpiochip_add_pin_range to request/set GPIO initial configuration.
+  * It returns error if it fails otherwise 0 on success.
+  */
+-static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
++int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
++                         unsigned int num)
+ {
+       struct gpio_desc *desc = NULL;
+       struct device_node *np;
+@@ -376,7 +379,7 @@ static int of_gpiochip_scan_gpios(struct
+       enum gpio_lookup_flags lflags;
+       enum gpiod_flags dflags;
+       unsigned int i;
+-      int ret;
++      int ret, hwgpio;
+       for_each_available_child_of_node(chip->of_node, np) {
+               if (!of_property_read_bool(np, "gpio-hog"))
+@@ -388,6 +391,10 @@ static int of_gpiochip_scan_gpios(struct
+                       if (IS_ERR(desc))
+                               break;
++                      hwgpio = gpio_chip_hwgpio(desc);
++                      if (hwgpio < start || hwgpio >= (start + num))
++                              continue;
++
+                       ret = gpiod_hog(desc, name, lflags, dflags);
+                       if (ret < 0) {
+                               of_node_put(np);
+@@ -646,12 +653,13 @@ int of_gpiochip_add(struct gpio_chip *ch
+       of_node_get(chip->of_node);
+-      status = of_gpiochip_scan_gpios(chip);
+-      if (status) {
+-              of_node_put(chip->of_node);
+-              gpiochip_remove_pin_ranges(chip);
++      if (!chip->request) {
++              status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
++              if (status) {
++                      of_node_put(chip->of_node);
++                      gpiochip_remove_pin_ranges(chip);
++              }
+       }
+-
+       return status;
+ }
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -2205,7 +2205,8 @@ int gpiochip_add_pingroup_range(struct g
+       list_add_tail(&pin_range->node, &gdev->pin_ranges);
+-      return 0;
++      return of_gpiochip_scan_gpios(chip, gpio_offset,
++                                    pin_range->range.npins);
+ }
+ EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
+@@ -2262,7 +2263,7 @@ int gpiochip_add_pin_range(struct gpio_c
+       list_add_tail(&pin_range->node, &gdev->pin_ranges);
+-      return 0;
++      return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
+ }
+ EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
+--- a/drivers/gpio/gpiolib.h
++++ b/drivers/gpio/gpiolib.h
+@@ -103,6 +103,8 @@ struct gpio_desc *of_get_named_gpiod_fla
+                  const char *list_name, int index, enum of_gpio_flags *flags);
+ int of_gpiochip_add(struct gpio_chip *gc);
+ void of_gpiochip_remove(struct gpio_chip *gc);
++int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
++                         unsigned int num);
+ #else
+ static inline struct gpio_desc *of_find_gpio(struct device *dev,
+                                            const char *con_id,
+@@ -118,6 +120,12 @@ static inline struct gpio_desc *of_get_n
+ }
+ static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
+ static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
++static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
++                                       unsigned int start,
++                                       unsigned int num)
++{
++      return 0;
++}
+ #endif /* CONFIG_OF_GPIO */
+ #ifdef CONFIG_ACPI
diff --git a/target/linux/bcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/bcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
new file mode 100644 (file)
index 0000000..6425869
--- /dev/null
@@ -0,0 +1,66 @@
+From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 19 Jan 2014 12:18:03 +0100
+Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
+
+In the same way as the ohci platform driver allows limiting ports,
+enable the same for ehci. This prevents a mismatch in the available
+ports between ehci/ohci on USB 2.0 controllers.
+
+This is needed if the USB host controller always reports the maximum
+number of ports regardless of the number of available ports (because
+one might be set to be usb device).
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      | 4 ++++
+ drivers/usb/host/ehci-platform.c | 2 ++
+ drivers/usb/host/ehci.h          | 1 +
+ include/linux/usb/ehci_pdriver.h | 1 +
+ 4 files changed, 8 insertions(+)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -665,6 +665,10 @@ int ehci_setup(struct usb_hcd *hcd)
+       /* cache this readonly data; minimize chip reads */
+       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++      if (ehci->num_ports) {
++              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
++              ehci->hcs_params |= ehci->num_ports;
++      }
+       ehci->sbrn = HCD_USB2;
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -57,6 +57,9 @@ static int ehci_platform_reset(struct us
+       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
++      if (pdata->num_ports && pdata->num_ports <= 15)
++              ehci->num_ports = pdata->num_ports;
++
+       if (pdata->pre_setup) {
+               retval = pdata->pre_setup(hcd);
+               if (retval < 0)
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -203,6 +203,7 @@ struct ehci_hcd {                  /* one per controlle
+       u32                     command;
+       /* SILICON QUIRKS */
++      unsigned int            num_ports;
+       unsigned                no_selective_suspend:1;
+       unsigned                has_fsl_port_bug:1; /* FreeScale */
+       unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -43,6 +43,7 @@ struct usb_hcd;
+  */
+ struct usb_ehci_pdata {
+       int             caps_offset;
++      unsigned int    num_ports;
+       unsigned        has_tt:1;
+       unsigned        has_synopsys_hc_bug:1;
+       unsigned        big_endian_desc:1;
diff --git a/target/linux/bcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/bcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
new file mode 100644 (file)
index 0000000..90b1640
--- /dev/null
@@ -0,0 +1,484 @@
+From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 03:54:05 +0100
+Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
+ own file
+
+Move device registration code into its own file to allow sharing it
+between board implementations.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Makefile         |   1 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
+ arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |   8 ++
+ 4 files changed, 223 insertions(+), 183 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.c
+ create mode 100644 arch/mips/bcm63xx/boards/board_common.h
+
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1 +1,2 @@
++obj-y                                 += board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,33 +12,21 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+-#include <linux/platform_device.h>
+-#include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_nvram.h>
+-#include <bcm63xx_dev_pci.h>
+-#include <bcm63xx_dev_enet.h>
+-#include <bcm63xx_dev_flash.h>
+-#include <bcm63xx_dev_hsspi.h>
+-#include <bcm63xx_dev_pcmcia.h>
+-#include <bcm63xx_dev_spi.h>
+-#include <bcm63xx_dev_usb_ehci.h>
+-#include <bcm63xx_dev_usb_ohci.h>
+-#include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include "board_common.h"
++
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #define HCS_OFFSET_128K                       0x20000
+-static struct board_info board;
+-
+ /*
+  * known 3368 boards
+  */
+@@ -695,52 +683,6 @@ static const struct board_info __initcon
+ };
+ /*
+- * Register a sane SPROMv2 to make the on-board
+- * bcm4318 WLAN work
+- */
+-#ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
+-      .revision               = 0x02,
+-      .board_rev              = 0x17,
+-      .country_code           = 0x0,
+-      .ant_available_bg       = 0x3,
+-      .pa0b0                  = 0x15ae,
+-      .pa0b1                  = 0xfa85,
+-      .pa0b2                  = 0xfe8d,
+-      .pa1b0                  = 0xffff,
+-      .pa1b1                  = 0xffff,
+-      .pa1b2                  = 0xffff,
+-      .gpio0                  = 0xff,
+-      .gpio1                  = 0xff,
+-      .gpio2                  = 0xff,
+-      .gpio3                  = 0xff,
+-      .maxpwr_bg              = 0x004c,
+-      .itssi_bg               = 0x00,
+-      .boardflags_lo          = 0x2848,
+-      .boardflags_hi          = 0x0000,
+-};
+-
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+-{
+-      if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+-              return 0;
+-      } else {
+-              pr_err("unable to fill SPROM for given bustype\n");
+-              return -EINVAL;
+-      }
+-}
+-#endif
+-
+-/*
+- * return board name for /proc/cpuinfo
+- */
+-const char *board_get_name(void)
+-{
+-      return board.name;
+-}
+-
+-/*
+  * early init callback, read nvram data from flash and checksum it
+  */
+ void __init board_prom_init(void)
+@@ -785,137 +727,15 @@ void __init board_prom_init(void)
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+                       continue;
+               /* copy, board desc array is marked initdata */
+-              memcpy(&board, bcm963xx_boards[i], sizeof(board));
++              board_early_setup(bcm963xx_boards[i]);
+               break;
+       }
+-      /* bail out if board is not found, will complain later */
+-      if (!board.name[0]) {
++      /* warn if board is not found, will complain later */
++      if (i == ARRAY_SIZE(bcm963xx_boards)) {
+               char name[17];
+               memcpy(name, board_name, 16);
+               name[16] = 0;
+               pr_err("unknown bcm963xx board: %s\n", name);
+-              return;
+-      }
+-
+-      /* setup pin multiplexing depending on board enabled device,
+-       * this has to be done this early since PCI init is done
+-       * inside arch_initcall */
+-      val = 0;
+-
+-#ifdef CONFIG_PCI
+-      if (board.has_pci) {
+-              bcm63xx_pci_enabled = 1;
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G2_PCI;
+       }
+-#endif
+-
+-      if (board.has_pccard) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
+-      }
+-
+-      if (board.has_enet0 && !board.enet0.use_internal_phy) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G3_EXT_MII |
+-                              GPIO_MODE_6348_G0_EXT_MII;
+-      }
+-
+-      if (board.has_enet1 && !board.enet1.use_internal_phy) {
+-              if (BCMCPU_IS_6348())
+-                      val |= GPIO_MODE_6348_G3_EXT_MII |
+-                              GPIO_MODE_6348_G0_EXT_MII;
+-      }
+-
+-      bcm_gpio_writel(val, GPIO_MODE_REG);
+-}
+-
+-/*
+- * second stage init callback, good time to panic if we couldn't
+- * identify on which board we're running since early printk is working
+- */
+-void __init board_setup(void)
+-{
+-      if (!board.name[0])
+-              panic("unable to detect bcm963xx board");
+-      pr_info("board name: %s\n", board.name);
+-
+-      /* make sure we're running on expected cpu */
+-      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+-              panic("unexpected CPU for bcm963xx board");
+-}
+-
+-static struct gpio_led_platform_data bcm63xx_led_data;
+-
+-static struct platform_device bcm63xx_gpio_leds = {
+-      .name                   = "leds-gpio",
+-      .id                     = 0,
+-      .dev.platform_data      = &bcm63xx_led_data,
+-};
+-
+-/*
+- * third stage init callback, register all board devices.
+- */
+-int __init board_register_devices(void)
+-{
+-      if (board.has_uart0)
+-              bcm63xx_uart_register(0);
+-
+-      if (board.has_uart1)
+-              bcm63xx_uart_register(1);
+-
+-      if (board.has_pccard)
+-              bcm63xx_pcmcia_register();
+-
+-      if (board.has_enet0 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
+-              bcm63xx_enet_register(0, &board.enet0);
+-
+-      if (board.has_enet1 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
+-              bcm63xx_enet_register(1, &board.enet1);
+-
+-      if (board.has_enetsw &&
+-          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+-              bcm63xx_enetsw_register(&board.enetsw);
+-
+-      if (board.has_usbd)
+-              bcm63xx_usbd_register(&board.usbd);
+-
+-      if (board.has_ehci0)
+-              bcm63xx_ehci_register();
+-
+-      if (board.has_ohci0)
+-              bcm63xx_ohci_register();
+-
+-      /* Generate MAC address for WLAN and register our SPROM,
+-       * do this after registering enet devices
+-       */
+-#ifdef CONFIG_SSB_PCIHOST
+-      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+-              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              if (ssb_arch_register_fallback_sprom(
+-                              &bcm63xx_get_fallback_sprom) < 0)
+-                      pr_err("failed to register fallback SPROM\n");
+-      }
+-#endif
+-
+-      bcm63xx_spi_register();
+-
+-      bcm63xx_hsspi_register();
+-
+-      bcm63xx_flash_register();
+-
+-      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+-      bcm63xx_led_data.leds = board.leds;
+-
+-      platform_device_register(&bcm63xx_gpio_leds);
+-
+-      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+-              gpio_request_one(board.ephy_reset_gpio,
+-                              board.ephy_reset_gpio_flags, "ephy-reset");
+-
+-      return 0;
+ }
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -0,0 +1,214 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/ssb/ssb.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_gpio.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_usbd.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "board: "
++
++static struct board_info board;
++
++/*
++ * Register a sane SPROMv2 to make the on-board
++ * bcm4318 WLAN work
++ */
++#ifdef CONFIG_SSB_PCIHOST
++static struct ssb_sprom bcm63xx_sprom = {
++      .revision               = 0x02,
++      .board_rev              = 0x17,
++      .country_code           = 0x0,
++      .ant_available_bg       = 0x3,
++      .pa0b0                  = 0x15ae,
++      .pa0b1                  = 0xfa85,
++      .pa0b2                  = 0xfe8d,
++      .pa1b0                  = 0xffff,
++      .pa1b1                  = 0xffff,
++      .pa1b2                  = 0xffff,
++      .gpio0                  = 0xff,
++      .gpio1                  = 0xff,
++      .gpio2                  = 0xff,
++      .gpio3                  = 0xff,
++      .maxpwr_bg              = 0x004c,
++      .itssi_bg               = 0x00,
++      .boardflags_lo          = 0x2848,
++      .boardflags_hi          = 0x0000,
++};
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->bustype == SSB_BUSTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
++
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++      return board.name;
++}
++
++/*
++ * setup board for device registration
++ */
++void __init board_early_setup(const struct board_info *target)
++{
++      u32 val;
++
++      memcpy(&board, target, sizeof(board));
++
++      /* setup pin multiplexing depending on board enabled device,
++       * this has to be done this early since PCI init is done
++       * inside arch_initcall */
++      val = 0;
++
++#ifdef CONFIG_PCI
++      if (board.has_pci) {
++              bcm63xx_pci_enabled = 1;
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G2_PCI;
++      }
++#endif
++
++      if (board.has_pccard) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
++      }
++
++      if (board.has_enet0 && !board.enet0.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      if (board.has_enet1 && !board.enet1.use_internal_phy) {
++              if (BCMCPU_IS_6348())
++                      val |= GPIO_MODE_6348_G3_EXT_MII |
++                              GPIO_MODE_6348_G0_EXT_MII;
++      }
++
++      bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++      if (!board.name[0])
++              panic("unable to detect bcm963xx board");
++      printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++      /* make sure we're running on expected cpu */
++      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++              panic("unexpected CPU for bcm963xx board");
++}
++
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++      .name                   = "leds-gpio",
++      .id                     = 0,
++      .dev.platform_data      = &bcm63xx_led_data,
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++      if (board.has_uart0)
++              bcm63xx_uart_register(0);
++
++      if (board.has_uart1)
++              bcm63xx_uart_register(1);
++
++      if (board.has_pccard)
++              bcm63xx_pcmcia_register();
++
++      if (board.has_enet0 &&
++          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++              bcm63xx_enet_register(0, &board.enet0);
++
++      if (board.has_enet1 &&
++          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++              bcm63xx_enet_register(1, &board.enet1);
++
++      if (board.has_enetsw &&
++          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++              bcm63xx_enetsw_register(&board.enetsw);
++
++      if (board.has_usbd)
++              bcm63xx_usbd_register(&board.usbd);
++
++      if (board.has_ehci0)
++              bcm63xx_ehci_register();
++
++      if (board.has_ohci0)
++              bcm63xx_ohci_register();
++
++      /* Generate MAC address for WLAN and register our SPROM,
++       * do this after registering enet devices
++       */
++#ifdef CONFIG_SSB_PCIHOST
++      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
++              if (ssb_arch_register_fallback_sprom(
++                              &bcm63xx_get_fallback_sprom) < 0)
++                      pr_err(PFX "failed to register fallback SPROM\n");
++      }
++#endif
++
++      bcm63xx_spi_register();
++
++      bcm63xx_hsspi_register();
++
++      bcm63xx_flash_register();
++
++      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
++      bcm63xx_led_data.leds = board.leds;
++
++      platform_device_register(&bcm63xx_gpio_leds);
++
++      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
++              gpio_request_one(board.ephy_reset_gpio,
++                              board.ephy_reset_gpio_flags, "ephy-reset");
++
++      return 0;
++}
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -0,0 +1,8 @@
++#ifndef __BOARD_COMMON_H
++#define __BOARD_COMMON_H
++
++#include <board_bcm963xx.h>
++
++void board_early_setup(const struct board_info *board);
++
++#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/bcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
new file mode 100644 (file)
index 0000000..7f9479b
--- /dev/null
@@ -0,0 +1,100 @@
+From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:08:06 +0100
+Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
+ setup
+
+Pass a mac address allocator to board setup code to allow board
+implementations to work with third party bootloaders not using nvram
+for configuration storage.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
+ arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
+ arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
+ 3 files changed, 14 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -727,7 +727,8 @@ void __init board_prom_init(void)
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+                       continue;
+               /* copy, board desc array is marked initdata */
+-              board_early_setup(bcm963xx_boards[i]);
++              board_early_setup(bcm963xx_boards[i],
++                                bcm63xx_nvram_get_mac_address);
+               break;
+       }
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -18,7 +18,6 @@
+ #include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+-#include <bcm63xx_nvram.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_dev_pci.h>
+ #include <bcm63xx_dev_enet.h>
+@@ -81,15 +80,20 @@ const char *board_get_name(void)
+       return board.name;
+ }
++static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
++
+ /*
+  * setup board for device registration
+  */
+-void __init board_early_setup(const struct board_info *target)
++void __init board_early_setup(const struct board_info *target,
++                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
+ {
+       u32 val;
+       memcpy(&board, target, sizeof(board));
++      board_get_mac_address = get_mac_address;
++
+       /* setup pin multiplexing depending on board enabled device,
+        * this has to be done this early since PCI init is done
+        * inside arch_initcall */
+@@ -162,15 +166,15 @@ int __init board_register_devices(void)
+               bcm63xx_pcmcia_register();
+       if (board.has_enet0 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
++          !board_get_mac_address(board.enet0.mac_addr))
+               bcm63xx_enet_register(0, &board.enet0);
+       if (board.has_enet1 &&
+-          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
++          !board_get_mac_address(board.enet1.mac_addr))
+               bcm63xx_enet_register(1, &board.enet1);
+       if (board.has_enetsw &&
+-          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
++          !board_get_mac_address(board.enetsw.mac_addr))
+               bcm63xx_enetsw_register(&board.enetsw);
+       if (board.has_usbd)
+@@ -186,7 +190,7 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+ #ifdef CONFIG_SSB_PCIHOST
+-      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+               if (ssb_arch_register_fallback_sprom(
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -3,6 +3,7 @@
+ #include <board_bcm963xx.h>
+-void board_early_setup(const struct board_info *board);
++void board_early_setup(const struct board_info *board,
++                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.19/309-cfe_version_mod.patch b/target/linux/bcm63xx/patches-4.19/309-cfe_version_mod.patch
new file mode 100644 (file)
index 0000000..fe6c6d2
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -707,10 +707,20 @@ void __init board_prom_init(void)
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+-      if (!memcmp(cfe, "cfe-v", 5))
+-              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+-                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+-      else
++      if (strstarts(cfe, "cfe-")) {
++              if(cfe[4] == 'v') {
++                      if(cfe[5] == 'd')
++                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
++                      else if (cfe[10] > 0)
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
++                      else
++                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++              } else {
++                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
++              }
++      } else
+               strcpy(cfe_version, "unknown");
+       pr_info("CFE version: %s\n", cfe_version);
diff --git a/target/linux/bcm63xx/patches-4.19/310-cfe_simplify_detection.patch b/target/linux/bcm63xx/patches-4.19/310-cfe_simplify_detection.patch
new file mode 100644 (file)
index 0000000..0e4e759
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
+@@ -2,6 +2,8 @@
+ #ifndef BCM63XX_BOARD_H_
+ #define BCM63XX_BOARD_H_
++#include <asm/bootinfo.h>
++
+ const char *board_get_name(void);
+ void board_prom_init(void);
+@@ -10,4 +12,8 @@ void board_setup(void);
+ int board_register_devices(void);
++static inline bool bcm63xx_is_cfe_present(void) {
++      return fw_arg3 == 0x43464531;
++}
++
+ #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch b/target/linux/bcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch
new file mode 100644 (file)
index 0000000..bca6adb
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -35,6 +35,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/of.h>
++ 
++#include <asm/mach-bcm63xx/bcm63xx_board.h>
+ #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
+@@ -46,30 +48,6 @@
+ #define STR_NULL_TERMINATE(x) \
+       do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
+-static int bcm63xx_detect_cfe(struct mtd_info *master)
+-{
+-      char buf[9];
+-      int ret;
+-      size_t retlen;
+-
+-      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      if (ret)
+-              return ret;
+-
+-      if (strncmp("cfe-v", buf, 5) == 0)
+-              return 0;
+-
+-      /* very old CFE's do not have the cfe-v string, so check for magic */
+-      ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
+-                     (void *)buf);
+-      buf[retlen] = 0;
+-
+-      return strncmp("CFE1CFE1", buf, 8);
+-}
+-
+ static int bcm63xx_read_nvram(struct mtd_info *master,
+       struct bcm963xx_nvram *nvram)
+ {
+@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
+       struct bcm963xx_nvram *nvram = NULL;
+       int ret;
+-      if (bcm63xx_detect_cfe(master))
++      if (!bcm63xx_is_cfe_present())
+               return -EINVAL;
+       nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/bcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/bcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
new file mode 100644 (file)
index 0000000..b75987e
--- /dev/null
@@ -0,0 +1,455 @@
+From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:53:12 +0100
+Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
+ controller
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ .../brcm,bcm6345-periph-intc.txt                   |   50 +++
+ drivers/irqchip/Kconfig                            |    4 +
+ drivers/irqchip/Makefile                           |    1 +
+ drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
+ include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
+ 5 files changed, 410 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
+ create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
+ create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
+@@ -0,0 +1,50 @@
++Broadcom BCM6345 Level 1 periphery interrupt controller
++
++This block is a  interrupt controller that is typically connected directly
++to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
++BCM6345 has contained this hardware.
++
++Key elements of the hardware design include:
++
++- 32, 64, or 128 incoming level IRQ lines
++
++- All onchip peripherals are wired directly to an L2 input
++
++- A separate instance of the register set for each CPU, allowing individual
++  peripheral IRQs to be routed to any CPU
++
++- No atomic mask/unmask operations
++
++- No polarity/level/edge settings
++
++- No FIFO or priority encoder logic; software is expected to read all
++  1-4 status words to determine which IRQs are pending
++
++Required properties:
++
++- compatible: Should be "brcm,bcm6345-periph-intc".
++- reg: Specifies the base physical address and size of the registers.
++  Multiple register addresses may be specified, and must match the amount of
++  parent interrupts.
++- interrupt-controller: Identifies the node as an interrupt controller.
++- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
++  source, should be 1.
++- interrupt-parent: Specifies the phandle to the parent interrupt controller
++  this one is cascaded from.
++- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
++  node, valid values depend on the type of parent interrupt controller.
++  Multiple lines are used to route interrupts to different cpus, with the first
++  assumed to be for the boot CPU.
++
++Example:
++
++periph_intc: interrupt-controller@f0406800 {
++      compatible = "brcm,bcm6345-periph-intc";
++      reg = <0x10000020 0x10>, <0x10000030 0x10>;
++
++      interrupt-controller;
++      #interrupt-cells = <1>;
++
++      interrupt-parent = <&cpu_intc>;
++      interrupts = <2>, <3>;
++};
+--- a/drivers/irqchip/Kconfig
++++ b/drivers/irqchip/Kconfig
+@@ -129,6 +129,10 @@ config BRCMSTB_L2_IRQ
+       select GENERIC_IRQ_CHIP
+       select IRQ_DOMAIN
++config BCM6345_PERIPH_IRQ
++      bool
++      select IRQ_DOMAIN
++
+ config DW_APB_ICTL
+       bool
+       select GENERIC_IRQ_CHIP
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
+ obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
+ obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
+ obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
++obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
+ obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
+ obj-$(CONFIG_CLPS711X_IRQCHIP)                += irq-clps711x.o
+ obj-$(CONFIG_OMPIC)                   += irq-ompic.o
+--- /dev/null
++++ b/drivers/irqchip/irq-bcm6345-periph.c
+@@ -0,0 +1,339 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/chained_irq.h>
++#include <linux/irqchip/irq-bcm6345-periph.h>
++#include <linux/kernel.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#ifdef CONFIG_BCM63XX
++#include <asm/mach-bcm63xx/bcm63xx_irq.h>
++
++#define VIRQ_BASE     IRQ_INTERNAL_BASE
++#else
++#define VIRQ_BASE     0
++#endif
++
++#define MAX_WORDS     4
++#define MAX_PARENT_IRQS       2
++#define IRQS_PER_WORD 32
++
++struct intc_block {
++      int parent_irq;
++      void __iomem *base;
++      void __iomem *en_reg[MAX_WORDS];
++      void __iomem *status_reg[MAX_WORDS];
++      u32 mask_cache[MAX_WORDS];
++};
++
++struct intc_data {
++      struct irq_chip chip;
++      struct intc_block block[MAX_PARENT_IRQS];
++
++      int num_words;
++
++      struct irq_domain *domain;
++      raw_spinlock_t lock;
++};
++
++static void bcm6345_periph_irq_handle(struct irq_desc *desc)
++{
++      struct intc_data *data = irq_desc_get_handler_data(desc);
++      struct irq_chip *chip = irq_desc_get_chip(desc);
++      struct intc_block *block;
++      unsigned int irq = irq_desc_get_irq(desc);
++      unsigned int idx;
++
++      chained_irq_enter(chip, desc);
++
++      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
++              if (irq == data->block[idx].parent_irq)
++                      block = &data->block[idx];
++
++      for (idx = 0; idx < data->num_words; idx++) {
++              int base = idx * IRQS_PER_WORD;
++              unsigned long pending;
++              int hw_irq;
++
++              raw_spin_lock(&data->lock);
++              pending = __raw_readl(block->en_reg[idx]) &
++                        __raw_readl(block->status_reg[idx]);
++              raw_spin_unlock(&data->lock);
++
++              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
++                      int virq;
++
++                      virq  = irq_find_mapping(data->domain, base + hw_irq);
++                      generic_handle_irq(virq);
++              }
++      }
++
++      chained_irq_exit(chip, desc);
++}
++
++static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
++                                  bool enable)
++{
++      u32 val;
++
++      val = __raw_readl(block->en_reg[reg]);
++      if (enable)
++              val |= BIT(bit);
++      else
++              val &= ~BIT(bit);
++      __raw_writel(val, block->en_reg[reg]);
++}
++
++static void bcm6345_periph_irq_mask(struct irq_data *data)
++{
++      unsigned int i, reg, bit;
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      raw_spin_lock(&priv->lock);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              __bcm6345_periph_enable(block, reg, bit, false);
++      }
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_periph_irq_unmask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      unsigned int i, reg, bit;
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      raw_spin_lock(&priv->lock);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              if (block->mask_cache[reg] & BIT(bit))
++                      __bcm6345_periph_enable(block, reg, bit, true);
++              else
++                      __bcm6345_periph_enable(block, reg, bit, false);
++      }
++      raw_spin_unlock(&priv->lock);
++}
++
++#ifdef CONFIG_SMP
++static int bcm6345_periph_set_affinity(struct irq_data *data,
++                                     const struct cpumask *mask, bool force)
++{
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      struct intc_data *priv = data->domain->host_data;
++      unsigned int i, reg, bit;
++      unsigned long flags;
++      bool enabled;
++      int cpu;
++
++      reg = hwirq / IRQS_PER_WORD;
++      bit = hwirq % IRQS_PER_WORD;
++
++      /* we could route to more than one cpu, but performance
++         suffers, so fix it to one.
++       */
++      cpu = cpumask_any_and(mask, cpu_online_mask);
++      if (cpu >= nr_cpu_ids)
++              return -EINVAL;
++
++      if (cpu >= MAX_PARENT_IRQS)
++              return -EINVAL;
++
++      if (!priv->block[cpu].parent_irq)
++              return -EINVAL;
++
++      raw_spin_lock_irqsave(&priv->lock, flags);
++      enabled = !irqd_irq_masked(data);
++      for (i = 0; i < MAX_PARENT_IRQS; i++) {
++              struct intc_block *block = &priv->block[i];
++
++              if (!block->parent_irq)
++                      break;
++
++              if (i == cpu) {
++                      block->mask_cache[reg] |= BIT(bit);
++                      __bcm6345_periph_enable(block, reg, bit, enabled);
++              } else {
++                      block->mask_cache[reg] &= ~BIT(bit);
++                      __bcm6345_periph_enable(block, reg, bit, false);
++              }
++      }
++      raw_spin_unlock_irqrestore(&priv->lock, flags);
++
++      return 0;
++}
++#endif
++
++static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
++                            irq_hw_number_t hw)
++{
++      struct intc_data *priv = d->host_data;
++
++      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
++
++      return 0;
++}
++
++static const struct irq_domain_ops bcm6345_periph_domain_ops = {
++      .xlate = irq_domain_xlate_onecell,
++      .map = bcm6345_periph_map,
++};
++
++static int __init __bcm6345_periph_intc_init(struct device_node *node,
++                                           int num_blocks, int *irq,
++                                           void __iomem **base, int num_words)
++{
++      struct intc_data *data;
++      unsigned int i, w, status_offset;
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (!data)
++              return -ENOMEM;
++
++      raw_spin_lock_init(&data->lock);
++
++      status_offset = num_words * sizeof(u32);
++
++      for (i = 0; i < num_blocks; i++) {
++              struct intc_block *block = &data->block[i];
++
++              block->parent_irq = irq[i];
++              block->base = base[i];
++
++              for (w = 0; w < num_words; w++) {
++                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
++
++                      block->en_reg[w] = base[i] + word_offset;
++                      block->status_reg[w] = base[i] + status_offset;
++                      block->status_reg[w] += word_offset;
++
++                      /* route all interrupts to line 0 by default */
++                      if (i == 0)
++                              block->mask_cache[w] = 0xffffffff;
++              }
++
++              irq_set_handler_data(block->parent_irq, data);
++              irq_set_chained_handler(block->parent_irq,
++                                      bcm6345_periph_irq_handle);
++      }
++
++      data->num_words = num_words;
++
++      data->chip.name = "bcm6345-periph-intc";
++      data->chip.irq_mask = bcm6345_periph_irq_mask;
++      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
++
++#ifdef CONFIG_SMP
++      if (num_blocks > 1)
++              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
++#endif
++
++      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
++                                           VIRQ_BASE,
++                                           &bcm6345_periph_domain_ops, data);
++      if (!data->domain) {
++              kfree(data);
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
++                                   void __iomem **base, int num_words)
++{
++      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
++}
++
++#ifdef CONFIG_OF
++static int __init bcm6345_periph_of_init(struct device_node *node,
++                                       struct device_node *parent)
++{
++      struct resource res;
++      int num_irqs, ret = -EINVAL;
++      int irqs[MAX_PARENT_IRQS] = { 0 };
++      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
++      int words = 0;
++      int i;
++
++      num_irqs = of_irq_count(node);
++
++      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
++              return -EINVAL;
++
++      for (i = 0; i < num_irqs; i++) {
++              resource_size_t size;
++
++              irqs[i] = irq_of_parse_and_map(node, i);
++              if (!irqs[i])
++                      goto out_unmap;
++
++              if (of_address_to_resource(node, i, &res))
++                      goto out_unmap;
++
++              size = resource_size(&res);
++              switch (size) {
++              case 8:
++              case 16:
++              case 32:
++                      size = size / 8;
++                      break;
++              default:
++                      goto out_unmap;
++              }
++
++              if (words && words != size) {
++                      ret = -EINVAL;
++                      goto out_unmap;
++              }
++              words = size;
++
++              bases[i] = of_iomap(node, i);
++              if (!bases[i]) {
++                      ret = -ENOMEM;
++                      goto out_unmap;
++              }
++      }
++
++      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
++      if (!ret)
++              return 0;
++
++out_unmap:
++      for (i = 0; i < num_irqs; i++) {
++              iounmap(bases[i]);
++              irq_dispose_mapping(irqs[i]);
++      }
++
++      return ret;
++}
++
++IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
++              bcm6345_periph_of_init);
++#endif
+--- /dev/null
++++ b/include/linux/irqchip/irq-bcm6345-periph.h
+@@ -0,0 +1,16 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
++ */
++
++#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
++#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
++
++void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
++                            int num_words);
++
++#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/bcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/bcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
new file mode 100644 (file)
index 0000000..4db80ef
--- /dev/null
@@ -0,0 +1,394 @@
+From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:54:27 +0100
+Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
+ interrupt controller
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
+ drivers/irqchip/Kconfig                            |    4 +
+ drivers/irqchip/Makefile                           |    1 +
+ drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
+ include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
+ 5 files changed, 335 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
+ create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
+ create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
+@@ -0,0 +1,29 @@
++Broadcom BCM6345-style external interrupt controller
++
++Required properties:
++
++- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
++- reg: Specifies the base physical addresses and size of the registers.
++- interrupt-controller: identifies the node as an interrupt controller.
++- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
++  source, Should be 2.
++- interrupt-parent: Specifies the phandle to the parent interrupt controller
++  this one is cascaded from.
++- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
++  node, valid values depend on the type of parent interrupt controller.
++
++Optional properties:
++
++- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
++  register. Defaults to 4.
++
++Example:
++
++ext_intc: interrupt-controller@10000018 {
++      compatible = "brcm,bcm6345-ext-intc";
++      interrupt-parent = <&periph_intc>;
++      #interrupt-cells = <2>;
++      reg = <0x10000018 0x4>;
++      interrupt-controller;
++      interrupts = <24>, <25>, <26>, <27>;
++};
+--- a/drivers/irqchip/Kconfig
++++ b/drivers/irqchip/Kconfig
+@@ -129,6 +129,10 @@ config BRCMSTB_L2_IRQ
+       select GENERIC_IRQ_CHIP
+       select IRQ_DOMAIN
++config BCM6345_EXT_IRQ
++      bool
++      select IRQ_DOMAIN
++
+ config BCM6345_PERIPH_IRQ
+       bool
+       select IRQ_DOMAIN
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
+ obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
+ obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
+ obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
++obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
+ obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
+ obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
+ obj-$(CONFIG_CLPS711X_IRQCHIP)                += irq-clps711x.o
+--- /dev/null
++++ b/drivers/irqchip/irq-bcm6345-ext.c
+@@ -0,0 +1,301 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#include <linux/ioport.h>
++#include <linux/irq.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/chained_irq.h>
++#include <linux/irqchip/irq-bcm6345-ext.h>
++#include <linux/kernel.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#ifdef CONFIG_BCM63XX
++#include <asm/mach-bcm63xx/bcm63xx_irq.h>
++
++#define VIRQ_BASE             IRQ_EXTERNAL_BASE
++#else
++#define VIRQ_BASE             0
++#endif
++
++#define MAX_IRQS              4
++
++#define EXTIRQ_CFG_SENSE      0
++#define EXTIRQ_CFG_STAT               1
++#define EXTIRQ_CFG_CLEAR      2
++#define EXTIRQ_CFG_MASK               3
++#define EXTIRQ_CFG_BOTHEDGE   4
++#define EXTIRQ_CFG_LEVELSENSE 5
++
++struct intc_data {
++      struct irq_chip chip;
++      struct irq_domain *domain;
++      raw_spinlock_t lock;
++
++      int parent_irq[MAX_IRQS];
++      void __iomem *reg;
++      int shift;
++      unsigned int toggle_clear_on_ack:1;
++};
++
++static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
++{
++      struct intc_data *data = irq_desc_get_handler_data(desc);
++      struct irq_chip *chip = irq_desc_get_chip(desc);
++      unsigned int irq = irq_desc_get_irq(desc);
++      unsigned int idx;
++
++      chained_irq_enter(chip, desc);
++
++      for (idx = 0; idx < MAX_IRQS; idx++) {
++              if (data->parent_irq[idx] != irq)
++                      continue;
++
++              generic_handle_irq(irq_find_mapping(data->domain, idx));
++      }
++
++      chained_irq_exit(chip, desc);
++}
++
++static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
++                   priv->reg);
++      if (priv->toggle_clear_on_ack)
++              __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      u32 reg;
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++      reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++}
++
++static int bcm6345_ext_intc_set_type(struct irq_data *data,
++                                   unsigned int flow_type)
++{
++      struct intc_data *priv = data->domain->host_data;
++      irq_hw_number_t hwirq = irqd_to_hwirq(data);
++      bool levelsense = 0, sense = 0, bothedge = 0;
++      u32 reg;
++
++      flow_type &= IRQ_TYPE_SENSE_MASK;
++
++      if (flow_type == IRQ_TYPE_NONE)
++              flow_type = IRQ_TYPE_LEVEL_LOW;
++
++      switch (flow_type) {
++      case IRQ_TYPE_EDGE_BOTH:
++              bothedge = 1;
++              break;
++
++      case IRQ_TYPE_EDGE_RISING:
++              sense = 1;
++              break;
++
++      case IRQ_TYPE_EDGE_FALLING:
++              break;
++
++      case IRQ_TYPE_LEVEL_HIGH:
++              levelsense = 1;
++              sense = 1;
++              break;
++
++      case IRQ_TYPE_LEVEL_LOW:
++              levelsense = 1;
++              break;
++
++      default:
++              pr_err("bogus flow type combination given!\n");
++              return -EINVAL;
++      }
++
++      raw_spin_lock(&priv->lock);
++      reg = __raw_readl(priv->reg);
++
++      if (levelsense)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
++      if (sense)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
++      if (bothedge)
++              reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
++      else
++              reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
++
++      __raw_writel(reg, priv->reg);
++      raw_spin_unlock(&priv->lock);
++
++      irqd_set_trigger_type(data, flow_type);
++      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
++              irq_set_handler_locked(data, handle_level_irq);
++      else
++              irq_set_handler_locked(data, handle_edge_irq);
++
++      return 0;
++}
++
++static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
++                              irq_hw_number_t hw)
++{
++      struct intc_data *priv = d->host_data;
++
++      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
++
++      return 0;
++}
++
++static const struct irq_domain_ops bcm6345_ext_domain_ops = {
++      .xlate = irq_domain_xlate_twocell,
++      .map = bcm6345_ext_intc_map,
++};
++
++static int __init __bcm6345_ext_intc_init(struct device_node *node,
++                                        int num_irqs, int *irqs,
++                                        void __iomem *reg, int shift,
++                                        bool toggle_clear_on_ack)
++{
++      struct intc_data *data;
++      unsigned int i;
++      int start = VIRQ_BASE;
++
++      data = kzalloc(sizeof(*data), GFP_KERNEL);
++      if (!data)
++              return -ENOMEM;
++
++      raw_spin_lock_init(&data->lock);
++
++      for (i = 0; i < num_irqs; i++) {
++              data->parent_irq[i] = irqs[i];
++
++              irq_set_handler_data(irqs[i], data);
++              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
++      }
++
++      data->reg = reg;
++      data->shift = shift;
++      data->toggle_clear_on_ack = toggle_clear_on_ack;
++
++      data->chip.name = "bcm6345-ext-intc";
++      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
++      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
++      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
++      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
++
++      /*
++       * If we have less than 4 irqs, this is the second controller on
++       * bcm63xx. So increase the VIRQ start to not overlap with the first
++       * one, but only do so if we actually use a non-zero start.
++       *
++       * This can be removed when bcm63xx has no legacy users anymore.
++       */
++      if (start && num_irqs < 4)
++              start += 4;
++
++      data->domain = irq_domain_add_simple(node, num_irqs, start,
++                                           &bcm6345_ext_domain_ops, data);
++      if (!data->domain) {
++              kfree(data);
++              return -ENOMEM;
++      }
++
++      return 0;
++}
++
++void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
++                                int shift)
++{
++      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
++}
++
++#ifdef CONFIG_OF
++static int __init bcm6345_ext_intc_of_init(struct device_node *node,
++                                         struct device_node *parent)
++{
++      int num_irqs, ret = -EINVAL;
++      unsigned i;
++      void __iomem *base;
++      int irqs[MAX_IRQS] = { 0 };
++      u32 shift;
++      bool toggle_clear_on_ack = false;
++
++      num_irqs = of_irq_count(node);
++
++      if (!num_irqs || num_irqs > MAX_IRQS)
++              return -EINVAL;
++
++      if (of_property_read_u32(node, "brcm,field-width", &shift))
++              shift = 4;
++
++      /* on BCM6318 setting CLEAR seems to continuously mask interrupts */
++      if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
++              toggle_clear_on_ack = true;
++
++      for (i = 0; i < num_irqs; i++) {
++              irqs[i] = irq_of_parse_and_map(node, i);
++              if (!irqs[i]) {
++                      ret = -ENOMEM;
++                      goto out_unmap;
++              }
++      }
++
++      base = of_iomap(node, 0);
++      if (!base)
++              goto out_unmap;
++
++      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
++                                    toggle_clear_on_ack);
++      if (!ret)
++              return 0;
++out_unmap:
++      iounmap(base);
++
++      for (i = 0; i < num_irqs; i++)
++              irq_dispose_mapping(irqs[i]);
++
++      return ret;
++}
++
++IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
++              bcm6345_ext_intc_of_init);
++IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
++              bcm6345_ext_intc_of_init);
++#endif
+--- /dev/null
++++ b/include/linux/irqchip/irq-bcm6345-ext.h
+@@ -0,0 +1,14 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
++ */
++
++#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
++#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
++
++void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
++
++#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/bcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
new file mode 100644 (file)
index 0000000..f0ffc65
--- /dev/null
@@ -0,0 +1,695 @@
+From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 14:55:02 +0100
+Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
+
+Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
+switch to using them.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/Kconfig       |   3 +
+ arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
+ 2 files changed, 108 insertions(+), 507 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -283,6 +283,9 @@ config BCM63XX
+       select SYNC_R4K
+       select DMA_NONCOHERENT
+       select IRQ_MIPS_CPU
++      select BCM6345_EXT_IRQ
++      select BCM6345_PERIPH_IRQ
++      select IRQ_DOMAIN
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_HAS_EARLY_PRINTK
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -11,7 +11,9 @@
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+-#include <linux/spinlock.h>
++#include <linux/irqchip.h>
++#include <linux/irqchip/irq-bcm6345-ext.h>
++#include <linux/irqchip/irq-bcm6345-periph.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -19,544 +21,140 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+-
+-static DEFINE_SPINLOCK(ipic_lock);
+-static DEFINE_SPINLOCK(epic_lock);
+-
+-static u32 irq_stat_addr[2];
+-static u32 irq_mask_addr[2];
+-static void (*dispatch_internal)(int cpu);
+-static int is_ext_irq_cascaded;
+-static unsigned int ext_irq_count;
+-static unsigned int ext_irq_start, ext_irq_end;
+-static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+-static void (*internal_irq_mask)(struct irq_data *d);
+-static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
+-
+-
+-static inline u32 get_ext_irq_perf_reg(int irq)
+-{
+-      if (irq < 4)
+-              return ext_irq_cfg_reg1;
+-      return ext_irq_cfg_reg2;
+-}
+-
+-static inline void handle_internal(int intbit)
+-{
+-      if (is_ext_irq_cascaded &&
+-          intbit >= ext_irq_start && intbit <= ext_irq_end)
+-              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
+-      else
+-              do_IRQ(intbit + IRQ_INTERNAL_BASE);
+-}
+-
+-static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
+-                                   const struct cpumask *m)
+-{
+-      bool enable = cpu_online(cpu);
+-
+-#ifdef CONFIG_SMP
+-      if (m)
+-              enable &= cpumask_test_cpu(cpu, m);
+-      else if (irqd_affinity_was_set(d))
+-              enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
+-#endif
+-      return enable;
+-}
+-
+-/*
+- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+- * prioritize any interrupt relatively to another. the static counter
+- * will resume the loop where it ended the last time we left this
+- * function.
+- */
+-
+-#define BUILD_IPIC_INTERNAL(width)                                    \
+-void __dispatch_internal_##width(int cpu)                             \
+-{                                                                     \
+-      u32 pending[width / 32];                                        \
+-      unsigned int src, tgt;                                          \
+-      bool irqs_pending = false;                                      \
+-      static unsigned int i[2];                                       \
+-      unsigned int *next = &i[cpu];                                   \
+-      unsigned long flags;                                            \
+-                                                                      \
+-      /* read registers in reverse order */                           \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
+-              u32 val;                                                \
+-                                                                      \
+-              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
+-              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
+-              pending[--tgt] = val;                                   \
+-                                                                      \
+-              if (val)                                                \
+-                      irqs_pending = true;                            \
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-                                                                      \
+-      if (!irqs_pending)                                              \
+-              return;                                                 \
+-                                                                      \
+-      while (1) {                                                     \
+-              unsigned int to_call = *next;                           \
+-                                                                      \
+-              *next = (*next + 1) & (width - 1);                      \
+-              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
+-                      handle_internal(to_call);                       \
+-                      break;                                          \
+-              }                                                       \
+-      }                                                               \
+-}                                                                     \
+-                                                                      \
+-static void __internal_irq_mask_##width(struct irq_data *d)           \
+-{                                                                     \
+-      u32 val;                                                        \
+-      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+-      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+-      unsigned bit = irq & 0x1f;                                      \
+-      unsigned long flags;                                            \
+-      int cpu;                                                        \
+-                                                                      \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for_each_present_cpu(cpu) {                                     \
+-              if (!irq_mask_addr[cpu])                                \
+-                      break;                                          \
+-                                                                      \
+-              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-              val &= ~(1 << bit);                                     \
+-              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-}                                                                     \
+-                                                                      \
+-static void __internal_irq_unmask_##width(struct irq_data *d,         \
+-                                        const struct cpumask *m)      \
+-{                                                                     \
+-      u32 val;                                                        \
+-      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
+-      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
+-      unsigned bit = irq & 0x1f;                                      \
+-      unsigned long flags;                                            \
+-      int cpu;                                                        \
+-                                                                      \
+-      spin_lock_irqsave(&ipic_lock, flags);                           \
+-      for_each_present_cpu(cpu) {                                     \
+-              if (!irq_mask_addr[cpu])                                \
+-                      break;                                          \
+-                                                                      \
+-              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-              if (enable_irq_for_cpu(cpu, d, m))                      \
+-                      val |= (1 << bit);                              \
+-              else                                                    \
+-                      val &= ~(1 << bit);                             \
+-              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
+-      }                                                               \
+-      spin_unlock_irqrestore(&ipic_lock, flags);                      \
+-}
+-
+-BUILD_IPIC_INTERNAL(32);
+-BUILD_IPIC_INTERNAL(64);
+-
+-asmlinkage void plat_irq_dispatch(void)
+-{
+-      u32 cause;
+-
+-      do {
+-              cause = read_c0_cause() & read_c0_status() & ST0_IM;
+-
+-              if (!cause)
+-                      break;
+-
+-              if (cause & CAUSEF_IP7)
+-                      do_IRQ(7);
+-              if (cause & CAUSEF_IP0)
+-                      do_IRQ(0);
+-              if (cause & CAUSEF_IP1)
+-                      do_IRQ(1);
+-              if (cause & CAUSEF_IP2)
+-                      dispatch_internal(0);
+-              if (is_ext_irq_cascaded) {
+-                      if (cause & CAUSEF_IP3)
+-                              dispatch_internal(1);
+-              } else {
+-                      if (cause & CAUSEF_IP3)
+-                              do_IRQ(IRQ_EXT_0);
+-                      if (cause & CAUSEF_IP4)
+-                              do_IRQ(IRQ_EXT_1);
+-                      if (cause & CAUSEF_IP5)
+-                              do_IRQ(IRQ_EXT_2);
+-                      if (cause & CAUSEF_IP6)
+-                              do_IRQ(IRQ_EXT_3);
+-              }
+-      } while (1);
+-}
+-
+-/*
+- * internal IRQs operations: only mask/unmask on PERF irq mask
+- * register.
+- */
+-static void bcm63xx_internal_irq_mask(struct irq_data *d)
+-{
+-      internal_irq_mask(d);
+-}
+-
+-static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+-{
+-      internal_irq_unmask(d, NULL);
+-}
+-
+-/*
+- * external IRQs operations: mask/unmask and clear on PERF external
+- * irq control register.
+- */
+-static void bcm63xx_external_irq_mask(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
+-      else
+-              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      if (is_ext_irq_cascaded)
+-              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
+-}
+-
+-static void bcm63xx_external_irq_unmask(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
+-      else
+-              reg |= EXTIRQ_CFG_MASK(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      if (is_ext_irq_cascaded)
+-              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
+-                                  NULL);
+-}
+-
+-static void bcm63xx_external_irq_clear(struct irq_data *d)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      unsigned long flags;
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-
+-      if (BCMCPU_IS_6348())
+-              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
+-      else
+-              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-}
+-
+-static int bcm63xx_external_irq_set_type(struct irq_data *d,
+-                                       unsigned int flow_type)
+-{
+-      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+-      u32 reg, regaddr;
+-      int levelsense, sense, bothedge;
+-      unsigned long flags;
+-
+-      flow_type &= IRQ_TYPE_SENSE_MASK;
+-
+-      if (flow_type == IRQ_TYPE_NONE)
+-              flow_type = IRQ_TYPE_LEVEL_LOW;
+-
+-      levelsense = sense = bothedge = 0;
+-      switch (flow_type) {
+-      case IRQ_TYPE_EDGE_BOTH:
+-              bothedge = 1;
+-              break;
+-
+-      case IRQ_TYPE_EDGE_RISING:
+-              sense = 1;
+-              break;
+-
+-      case IRQ_TYPE_EDGE_FALLING:
+-              break;
+-
+-      case IRQ_TYPE_LEVEL_HIGH:
+-              levelsense = 1;
+-              sense = 1;
+-              break;
+-
+-      case IRQ_TYPE_LEVEL_LOW:
+-              levelsense = 1;
+-              break;
+-
+-      default:
+-              pr_err("bogus flow type combination given !\n");
+-              return -EINVAL;
+-      }
+-
+-      regaddr = get_ext_irq_perf_reg(irq);
+-      spin_lock_irqsave(&epic_lock, flags);
+-      reg = bcm_perf_readl(regaddr);
+-      irq %= 4;
+-
+-      switch (bcm63xx_get_cpu_id()) {
+-      case BCM6348_CPU_ID:
+-              if (levelsense)
+-                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
+-              if (sense)
+-                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
+-              if (bothedge)
+-                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
+-              break;
+-
+-      case BCM3368_CPU_ID:
+-      case BCM6328_CPU_ID:
+-      case BCM6338_CPU_ID:
+-      case BCM6345_CPU_ID:
+-      case BCM6358_CPU_ID:
+-      case BCM6362_CPU_ID:
+-      case BCM6368_CPU_ID:
+-              if (levelsense)
+-                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+-              if (sense)
+-                      reg |= EXTIRQ_CFG_SENSE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_SENSE(irq);
+-              if (bothedge)
+-                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+-              else
+-                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+-              break;
+-      default:
+-              BUG();
+-      }
+-
+-      bcm_perf_writel(reg, regaddr);
+-      spin_unlock_irqrestore(&epic_lock, flags);
+-
+-      irqd_set_trigger_type(d, flow_type);
+-      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+-              irq_set_handler_locked(d, handle_level_irq);
+-      else
+-              irq_set_handler_locked(d, handle_edge_irq);
+-
+-      return IRQ_SET_MASK_OK_NOCOPY;
+-}
+-
+-#ifdef CONFIG_SMP
+-static int bcm63xx_internal_set_affinity(struct irq_data *data,
+-                                       const struct cpumask *dest,
+-                                       bool force)
+-{
+-      if (!irqd_irq_disabled(data))
+-              internal_irq_unmask(data, dest);
+-
+-      return 0;
+-}
+-#endif
+-
+-static struct irq_chip bcm63xx_internal_irq_chip = {
+-      .name           = "bcm63xx_ipic",
+-      .irq_mask       = bcm63xx_internal_irq_mask,
+-      .irq_unmask     = bcm63xx_internal_irq_unmask,
+-};
+-
+-static struct irq_chip bcm63xx_external_irq_chip = {
+-      .name           = "bcm63xx_epic",
+-      .irq_ack        = bcm63xx_external_irq_clear,
+-
+-      .irq_mask       = bcm63xx_external_irq_mask,
+-      .irq_unmask     = bcm63xx_external_irq_unmask,
+-
+-      .irq_set_type   = bcm63xx_external_irq_set_type,
+-};
+-
+-static struct irqaction cpu_ip2_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_ip2",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-
+-#ifdef CONFIG_SMP
+-static struct irqaction cpu_ip3_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_ip3",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-#endif
+-
+-static struct irqaction cpu_ext_cascade_action = {
+-      .handler        = no_action,
+-      .name           = "cascade_extirq",
+-      .flags          = IRQF_NO_THREAD,
+-};
+-
+-static void bcm63xx_init_irq(void)
++void __init arch_init_irq(void)
+ {
+-      int irq_bits;
+-
+-      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
+-      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
+-      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
++      void __iomem *periph_bases[2];
++      void __iomem *ext_intc_bases[2];
++      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
++      int periph_irqs[2] = { 2, 3 };
++      int ext_irqs[6];
++
++      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
++      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM3368_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
++              periph_bases[0] += PERF_IRQMASK_3368_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_3368_EXT_IRQ0;
++              ext_irqs[1] = BCM_3368_EXT_IRQ1;
++              ext_irqs[2] = BCM_3368_EXT_IRQ2;
++              ext_irqs[3] = BCM_3368_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6328_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
++              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6328_EXT_IRQ0;
++              ext_irqs[1] = BCM_6328_EXT_IRQ1;
++              ext_irqs[2] = BCM_6328_EXT_IRQ2;
++              ext_irqs[3] = BCM_6328_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6338_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
++              periph_bases[0] += PERF_IRQMASK_6338_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 4;
+               break;
+       case BCM6345_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
++              periph_bases[0] += PERF_IRQMASK_6345_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 4;
+               break;
+       case BCM6348_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
+-              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
+-              irq_stat_addr[1] = 0;
+-              irq_mask_addr[1] = 0;
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
++              periph_bases[0] += PERF_IRQMASK_6348_REG;
++              periph_irq_count = 1;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
++              ext_irq_count = 4;
++              ext_irqs[0] = 3;
++              ext_irqs[1] = 4;
++              ext_irqs[2] = 5;
++              ext_irqs[3] = 6;
++              ext_shift = 5;
+               break;
+       case BCM6358_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
+-              irq_bits = 32;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
++              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
++              periph_irq_count = 2;
++              periph_width = 1;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6358_EXT_IRQ0;
++              ext_irqs[1] = BCM_6358_EXT_IRQ1;
++              ext_irqs[2] = BCM_6358_EXT_IRQ2;
++              ext_irqs[3] = BCM_6358_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6362_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
+-              irq_bits = 64;
+-              ext_irq_count = 4;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
++              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6362_EXT_IRQ0;
++              ext_irqs[1] = BCM_6362_EXT_IRQ1;
++              ext_irqs[2] = BCM_6362_EXT_IRQ2;
++              ext_irqs[3] = BCM_6362_EXT_IRQ3;
++              ext_shift = 4;
+               break;
+       case BCM6368_CPU_ID:
+-              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
+-              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
+-              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
+-              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
+-              irq_bits = 64;
++              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
++              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
++              periph_irq_count = 2;
++              periph_width = 2;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
++              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
+               ext_irq_count = 6;
+-              is_ext_irq_cascaded = 1;
+-              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+-              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+-              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
++              ext_irqs[0] = BCM_6368_EXT_IRQ0;
++              ext_irqs[1] = BCM_6368_EXT_IRQ1;
++              ext_irqs[2] = BCM_6368_EXT_IRQ2;
++              ext_irqs[3] = BCM_6368_EXT_IRQ3;
++              ext_irqs[4] = BCM_6368_EXT_IRQ4;
++              ext_irqs[5] = BCM_6368_EXT_IRQ5;
++              ext_shift = 4;
+               break;
+       default:
+               BUG();
+       }
+-      if (irq_bits == 32) {
+-              dispatch_internal = __dispatch_internal_32;
+-              internal_irq_mask = __internal_irq_mask_32;
+-              internal_irq_unmask = __internal_irq_unmask_32;
+-      } else {
+-              dispatch_internal = __dispatch_internal_64;
+-              internal_irq_mask = __internal_irq_mask_64;
+-              internal_irq_unmask = __internal_irq_unmask_64;
+-      }
+-}
+-
+-void __init arch_init_irq(void)
+-{
+-      int i;
+-
+-      bcm63xx_init_irq();
+       mips_cpu_irq_init();
+-      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
+-              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
+-                                       handle_level_irq);
+-
+-      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
+-              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
+-                                       handle_edge_irq);
+-
+-      if (!is_ext_irq_cascaded) {
+-              for (i = 3; i < 3 + ext_irq_count; ++i)
+-                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+-      }
+-
+-      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+-#ifdef CONFIG_SMP
+-      if (is_ext_irq_cascaded) {
+-              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
+-              bcm63xx_internal_irq_chip.irq_set_affinity =
+-                      bcm63xx_internal_set_affinity;
+-
+-              cpumask_clear(irq_default_affinity);
+-              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
+-      }
+-#endif
++      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
++                               periph_width);
++      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
++      if (ext_irq_count > 4)
++              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
++                                    ext_shift);
+ }
diff --git a/target/linux/bcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/bcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
new file mode 100644 (file)
index 0000000..e911f0e
--- /dev/null
@@ -0,0 +1,57 @@
+From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 30 Nov 2014 20:20:30 +0100
+Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
+ and 5
+
+Due to the external interrupts being non consecutive, the previous
+implementation did not support them. Now that we treat both registers
+as separate irq controllers, there is no such limitation anymore and
+we can expose them for drivers to use.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c                           |    5 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
+ 3 files changed, 7 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
+               periph_width = 1;
+               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
+-              ext_irq_count = 4;
++              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
++              ext_irq_count = 6;
+               ext_irqs[0] = BCM_6358_EXT_IRQ0;
+               ext_irqs[1] = BCM_6358_EXT_IRQ1;
+               ext_irqs[2] = BCM_6358_EXT_IRQ2;
+               ext_irqs[3] = BCM_6358_EXT_IRQ3;
++              ext_irqs[4] = BCM_6358_EXT_IRQ4;
++              ext_irqs[5] = BCM_6358_EXT_IRQ5;
+               ext_shift = 4;
+               break;
+       case BCM6362_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -896,6 +896,8 @@ enum bcm63xx_irq {
+ #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
+ #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
+ #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
++#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
++#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
+ /*
+  * 6362 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -244,6 +244,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
++#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+ /* for 6348 only */
diff --git a/target/linux/bcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/bcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
new file mode 100644 (file)
index 0000000..07d3f9d
--- /dev/null
@@ -0,0 +1,77 @@
+From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:08:36 +0100
+Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
+ 2 files changed, 28 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
+ u16 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
++static u32 bcm63xx_cpu_variant __read_mostly;
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
+ };
++u32 bcm63xx_get_cpu_variant(void)
++{
++      return bcm63xx_cpu_variant;
++}
++
++EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
++
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+       return bcm63xx_cpu_rev;
+@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -20,6 +20,7 @@
+ #define BCM6368_CPU_ID                0x6368
+ void __init bcm63xx_cpu_init(void);
++u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_3368() \
++      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6328() \
++      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_6338() \
++      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
++#define BCMCPU_VARIANT_IS_6345() \
++      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
++#define BCMCPU_VARIANT_IS_6348() \
++      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
++#define BCMCPU_VARIANT_IS_6358() \
++      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6362() \
++      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
++#define BCMCPU_VARIANT_IS_6368() \
++      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+  * address of these sets do change.
diff --git a/target/linux/bcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/bcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch
new file mode 100644 (file)
index 0000000..57af836
--- /dev/null
@@ -0,0 +1,23 @@
+From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:22:41 +0100
+Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
+
+Some SoC have a variant id field in the chip id register.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -10,6 +10,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_VARID_SHIFT                       12
++#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+ #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/bcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/bcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
new file mode 100644 (file)
index 0000000..a05a4b3
--- /dev/null
@@ -0,0 +1,68 @@
+From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:30:59 +0100
+Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
+ 2 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
+       unsigned int tmp;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+       chipid_reg = 0;
+@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
++      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6328_CPU_ID:
+               bcm63xx_regs_base = bcm6328_regs_base;
+               bcm63xx_irqs = bcm6328_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
++              else if (varid == 3)
++                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
++              else
++                      pr_warn("unknown BCM6328 variant: %x\n", varid);
++
+               break;
+       case BCM6338_CPU_ID:
+               bcm63xx_regs_base = bcm6338_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -12,6 +12,8 @@
+  */
+ #define BCM3368_CPU_ID                0x3368
+ #define BCM6328_CPU_ID                0x6328
++#define BCM63281_CPU_ID               0x63281
++#define BCM63283_CPU_ID               0x63283
+ #define BCM6338_CPU_ID                0x6338
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+-#define BCMCPU_VARIANT_IS_6328() \
+-      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_63281() \
++      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
++#define BCMCPU_VARIANT_IS_63283() \
++      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6338() \
+       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/bcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/bcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
new file mode 100644 (file)
index 0000000..2efbf36
--- /dev/null
@@ -0,0 +1,46 @@
+From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:33:28 +0100
+Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 11 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
+       case BCM6362_CPU_ID:
+               bcm63xx_regs_base = bcm6362_regs_base;
+               bcm63xx_irqs = bcm6362_irqs;
++
++              if (varid == 1)
++                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
++              else if (varid == 2)
++                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
++              else
++                      pr_warn("unknown BCM6362 variant: %x\n", varid);
++
+               break;
+       case BCM6368_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -18,6 +18,7 @@
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+ #define BCM6358_CPU_ID                0x6358
++#define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6358() \
+       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6361() \
++      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6362() \
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/bcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/bcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
new file mode 100644 (file)
index 0000000..64bcd8f
--- /dev/null
@@ -0,0 +1,48 @@
+From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:36:56 +0100
+Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
+
+The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
+from missing DSL, there is no difference to BCM6368, so treat it such.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          | 4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       case BCM6368_CPU_ID:
++      case BCM6369_CPU_ID:
+               bcm63xx_regs_base = bcm6368_regs_base;
+               bcm63xx_irqs = bcm6368_irqs;
++
++              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
++              bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -21,6 +21,7 @@
+ #define BCM6361_CPU_ID                0x6361
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
++#define BCM6369_CPU_ID                0x6369
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6369() \
++      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/bcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/bcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
new file mode 100644 (file)
index 0000000..54900d7
--- /dev/null
@@ -0,0 +1,20 @@
+From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:05:54 +0100
+Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -42,7 +42,7 @@
+                                       BCM_CB_MEM_SIZE - 1)
+ #define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
++#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/bcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/bcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
new file mode 100644 (file)
index 0000000..05142a8
--- /dev/null
@@ -0,0 +1,70 @@
+From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:13:06 +0100
+Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
+
+Different SoCs use different memory windows (and sizes), so don't
+hardcode it.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
+ arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
+ 2 files changed, 14 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,10 +41,10 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
+-#define BCM_PCIE_MEM_BASE_PA          0x10f00000
+-#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
+-#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
+-                                      BCM_PCIE_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
++#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
++                                      BCM_PCIE_MEM_SIZE_6328 - 1)
+ /*
+  * Internal registers are accessed through KSEG3
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
+ static struct resource bcm_pcie_mem_resource = {
+       .name   = "bcm63xx PCIe memory space",
+-      .start  = BCM_PCIE_MEM_BASE_PA,
+-      .end    = BCM_PCIE_MEM_END_PA,
++      .start  = 0,
++      .end    = 0,
+       .flags  = IORESOURCE_MEM,
+ };
+@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+       /* set bar0 to little endian */
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+       val |= BASEMASK_REMAP_EN;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+       register_pci_controller(&bcm63xx_pcie_controller);
+@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      }
++
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/bcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch
new file mode 100644 (file)
index 0000000..c38b431
--- /dev/null
@@ -0,0 +1,56 @@
+From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:54:51 +0100
+Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+-u16 bcm63xx_cpu_id __read_mostly;
++u32 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
+ static u32 bcm63xx_cpu_variant __read_mostly;
+@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
+ static unsigned int detect_cpu_clock(void)
+ {
+-      u16 cpu_id = bcm63xx_get_cpu_id();
++      u32 cpu_id = bcm63xx_get_cpu_id();
+       switch (cpu_id) {
+       case BCM3368_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+-static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
+ {
+       switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
+       return cpu_id;
+ }
+-extern u16 bcm63xx_cpu_id;
++extern u32 bcm63xx_cpu_id;
+-static inline u16 __pure bcm63xx_get_cpu_id(void)
++static inline u32 __pure bcm63xx_get_cpu_id(void)
+ {
+-      const u16 cpu_id = bcm63xx_cpu_id;
++      const u32 cpu_id = bcm63xx_cpu_id;
+       return __bcm63xx_get_cpu_id(cpu_id);
+ }
diff --git a/target/linux/bcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/bcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
new file mode 100644 (file)
index 0000000..1809a3c
--- /dev/null
@@ -0,0 +1,39 @@
+From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:46:26 +0100
+Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
+
+Newer SoCs have 128 bit wide irq registers, thus 128 available internal
+interupts.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
+ arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
+@@ -2,10 +2,12 @@
+ #ifndef BCM63XX_IRQ_H_
+ #define BCM63XX_IRQ_H_
++#include <irq.h>
+ #include <bcm63xx_cpu.h>
+ #define IRQ_INTERNAL_BASE             8
+-#define IRQ_EXTERNAL_BASE             100
++#define NR_INTERNAL_IRQS              128
++#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
+ #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
+ #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
+ #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
+--- a/arch/mips/include/asm/mach-bcm63xx/irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
+@@ -2,7 +2,7 @@
+ #ifndef __ASM_MACH_BCM63XX_IRQ_H
+ #define __ASM_MACH_BCM63XX_IRQ_H
+-#define NR_IRQS 128
++#define NR_IRQS 256
+ #define MIPS_CPU_IRQ_BASE 0
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..54ec472
--- /dev/null
@@ -0,0 +1,737 @@
+From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 17:14:17 +0100
+Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
+ arch/mips/bcm63xx/dev-flash.c                     |   6 +
+ arch/mips/bcm63xx/dev-spi.c                       |   4 +-
+ arch/mips/bcm63xx/irq.c                           |  20 +++-
+ arch/mips/bcm63xx/reset.c                         |  21 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 12 files changed, 342 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++
++config BCM63XX_CPU_63268
++      bool "support 63268 CPU"
++      select SYS_HAS_CPU_BMIPS4350
++      select HW_HAS_PCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -697,7 +697,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
+                       clk_disable_unlocked(&clk_swpkt_sar);
+               }
+               bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
++      } else if (BCMCPU_IS_63268()) {
++              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
+       } else {
+               return;
+       }
+@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+       else
+               return;
+@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
+       else
+               return;
+@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
+               mask = CKCTL_6358_SPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_SPI_EN;
+-      else
+-              /* BCMCPU_IS_6368 */
++      else if (BCMCPU_IS_6368())
+               mask = CKCTL_6368_SPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_SPI_EN;
++      else
++              return;
++
+       bcm_hwclock_set(mask, enable);
+ }
+@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
++      else if (BCMCPU_IS_63268())
++              mask = CKCTL_63268_HSSPI_EN;
+       else
+               return;
+@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+       else if (BCMCPU_IS_6362())
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
++      else if (BCMCPU_IS_63268())
++              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
+ }
+ static struct clk clk_pcie = {
+@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
+       CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
+ };
++static struct clk_lookup bcm63268_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
++      CLKDEV_INIT(NULL, "spi", &clk_spi),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++};
++
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
+       case BCM6368_CPU_ID:
+               clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
+               break;
++      case BCM63268_CPU_ID:
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
++              clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
++              break;
+       }
+       return 0;
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
+ };
++static const unsigned long bcm63268_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(63268)
++};
++
++static const int bcm63268_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(63268)
++
++};
++
+ u32 bcm63xx_get_cpu_variant(void)
+ {
+       return bcm63xx_cpu_variant;
+@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
+               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
+       }
++      case BCM63268_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
++                              STRAPBUS_63268_FCVO_SHIFT;
++              switch (mips_pll_fcvo) {
++              case 0x3:
++              case 0xe:
++                      return 320000000;
++              case 0xa:
++                      return 333000000;
++              case 0x2:
++              case 0xb:
++              case 0xf:
++                      return 400000000;
++              default:
++                      return 0;
++              }
++      }
+       default:
+               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
+@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+       if (BCMCPU_IS_6345()) {
+@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
+       unsigned int tmp;
+       unsigned int cpu = smp_processor_id();
+       u32 chipid_reg;
++      bool long_chipid = false;
+       u8 __maybe_unused varid = 0;
+       /* soc registers location depends on cpu type */
+@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
+               case 0x10:
+                       chipid_reg = BCM_6345_PERF_BASE;
+                       break;
++              case 0x80:
++                      long_chipid = true;
++                      /* fall-through */
+               default:
+                       chipid_reg = BCM_6368_PERF_BASE;
+                       break;
+@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
+               break;
+       }
++
+       /*
+        * really early to panic, but delaying panic would not help since we
+        * will never get any working console
+@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
+       /* read out CPU type */
+       tmp = bcm_readl(chipid_reg);
+-      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+-      bcm63xx_cpu_variant = bcm63xx_cpu_id;
++
++      if (long_chipid) {
++              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
++              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
++      } else {
++              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      }
++
+       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+-      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++      bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
+       case BCM3368_CPU_ID:
+@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
+               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
+               bcm63xx_cpu_id = BCM6368_CPU_ID;
+               break;
++      case BCM63168_CPU_ID:
++      case BCM63169_CPU_ID:
++      case BCM63268_CPU_ID:
++      case BCM63269_CPU_ID:
++              bcm63xx_regs_base = bcm63268_regs_base;
++              bcm63xx_irqs = bcm63268_irqs;
++
++              bcm63xx_cpu_id = BCM63268_CPU_ID;
++              break;
+       default:
+               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+               break;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
+               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+                       return BCM63XX_FLASH_TYPE_PARALLEL;
+               }
++      case BCM63268_CPU_ID:
++              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
++                      return BCM63XX_FLASH_TYPE_SERIAL;
++              else
++                      return BCM63XX_FLASH_TYPE_NAND;
+       default:
+               return -EINVAL;
+       }
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
+       }
+       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-              BCMCPU_IS_6368()) {
++              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+               bcm63xx_spi_device.name = "bcm6358-spi",
+               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+       }
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
+               ext_irqs[5] = BCM_6368_EXT_IRQ5;
+               ext_shift = 4;
+               break;
++      case BCM63268_CPU_ID:
++              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
++              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
++              periph_irq_count = 2;
++              periph_width = 4;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_63268_EXT_IRQ0;
++              ext_irqs[1] = BCM_63268_EXT_IRQ1;
++              ext_irqs[2] = BCM_63268_EXT_IRQ2;
++              ext_irqs[3] = BCM_63268_EXT_IRQ3;
++              ext_shift = 4;
++              break;
+       default:
+               BUG();
+       }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -126,6 +126,20 @@
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
++#define BCM63268_RESET_ENET   0
++#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
++#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
++#define BCM63268_RESET_DSL    0
++#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
++#define BCM63268_RESET_EPHY   0
++#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
++#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
++#define BCM63268_RESET_MPI    0
++#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
++                               SOFTRESET_63268_PCIE_CORE_MASK)
++#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++
+ /*
+  * core reset bits
+  */
+@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(6368)
+ };
++static const u32 bcm63268_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(63268)
++};
++
+ const u32 *bcm63xx_reset_bits;
+ static int reset_reg;
+@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
+       } else if (BCMCPU_IS_6368()) {
+               reset_reg = PERF_SOFTRESET_6368_REG;
+               bcm63xx_reset_bits = bcm6368_reset_bits;
++      } else if (BCMCPU_IS_63268()) {
++              reset_reg = PERF_SOFTRESET_63268_REG;
++              bcm63xx_reset_bits = bcm63268_reset_bits;
+       }
+       return 0;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -22,6 +22,10 @@
+ #define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+ #define BCM6369_CPU_ID                0x6369
++#define BCM63168_CPU_ID               0x63168
++#define BCM63169_CPU_ID               0x63169
++#define BCM63268_CPU_ID               0x63268
++#define BCM63269_CPU_ID               0x63269
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c
+ #ifdef CONFIG_BCM63XX_CPU_6368
+               case BCM6368_CPU_ID:
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_63268
++              case BCM63268_CPU_ID:
++#endif
+               break;
+       default:
+               unreachable();
+@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+ #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu
+       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6369() \
+       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
++#define BCMCPU_VARIANT_IS_63168() \
++      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
++#define BCMCPU_VARIANT_IS_63169() \
++      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
++#define BCMCPU_VARIANT_IS_63268() \
++      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
++#define BCMCPU_VARIANT_IS_63269() \
++      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+@@ -574,6 +591,52 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_RNG_BASE             (0xb0004180)
+ #define BCM_6368_MISC_BASE            (0xdeadbeef)
++/*
++ * 63268 register sets base address
++ */
++#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
++#define BCM_63268_PERF_BASE           (0xb0000000)
++#define BCM_63268_TIMER_BASE          (0xb0000080)
++#define BCM_63268_WDT_BASE            (0xb000009c)
++#define BCM_63268_UART0_BASE          (0xb0000180)
++#define BCM_63268_UART1_BASE          (0xb00001a0)
++#define BCM_63268_GPIO_BASE           (0xb00000c0)
++#define BCM_63268_SPI_BASE            (0xb0000800)
++#define BCM_63268_HSSPI_BASE          (0xb0001000)
++#define BCM_63268_UDC0_BASE           (0xdeadbeef)
++#define BCM_63268_USBDMA_BASE         (0xb000c800)
++#define BCM_63268_OHCI0_BASE          (0xb0002600)
++#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
++#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
++#define BCM_63268_USBD_BASE           (0xb0002400)
++#define BCM_63268_MPI_BASE            (0xdeadbeef)
++#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
++#define BCM_63268_PCIE_BASE           (0xb06e0000)
++#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
++#define BCM_63268_DSL_BASE            (0xdeadbeef)
++#define BCM_63268_UBUS_BASE           (0xdeadbeef)
++#define BCM_63268_ENET0_BASE          (0xdeadbeef)
++#define BCM_63268_ENET1_BASE          (0xdeadbeef)
++#define BCM_63268_ENETDMA_BASE                (0xb000d800)
++#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
++#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
++#define BCM_63268_ENETSW_BASE         (0xb0700000)
++#define BCM_63268_EHCI0_BASE          (0xb0002500)
++#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
++#define BCM_63268_MEMC_BASE           (0xdeadbeef)
++#define BCM_63268_DDR_BASE            (0xb0003000)
++#define BCM_63268_M2M_BASE            (0xdeadbeef)
++#define BCM_63268_ATM_BASE            (0xdeadbeef)
++#define BCM_63268_XTM_BASE            (0xb0007000)
++#define BCM_63268_XTMDMA_BASE         (0xb000b800)
++#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_PCM_BASE            (0xb000b000)
++#define BCM_63268_PCMDMA_BASE         (0xb000b800)
++#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
++#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
++#define BCM_63268_RNG_BASE            (0xdeadbeef)
++#define BCM_63268_MISC_BASE           (0xb0001800)
+ extern const unsigned long *bcm63xx_regs_base;
+@@ -1042,6 +1105,73 @@ enum bcm63xx_irq {
+ #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
+ #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
++/*
++ * 63268 irqs
++ */
++#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
++#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
++
++#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
++#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
++#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
++#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
++#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
++#define BCM_63268_UDC0_IRQ            0
++#define BCM_63268_ENET0_IRQ           0
++#define BCM_63268_ENET1_IRQ           0
++#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
++#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
++#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
++#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
++#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
++#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
++#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
++#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
++#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
++#define BCM_63268_PCMCIA_IRQ          0
++#define BCM_63268_ENET0_RXDMA_IRQ     0
++#define BCM_63268_ENET0_TXDMA_IRQ     0
++#define BCM_63268_ENET1_RXDMA_IRQ     0
++#define BCM_63268_ENET1_TXDMA_IRQ     0
++#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
++#define BCM_63268_ATM_IRQ             0
++#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
++#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
++#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
++#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
++#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
++#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
++#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
++#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
++#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
++#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
++
++#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
++#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
++#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
++#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
++#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
++#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
++#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
++#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
++#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
++#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
++#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
++#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
++#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
++#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
++#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
++#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
++#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
++#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
++#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
++#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
++#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
++
+ extern const int *bcm63xx_irqs;
+ #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
+               return 48;
+       case BCM6368_CPU_ID:
+               return 38;
++      case BCM63268_CPU_ID:
++              return 52;
+       case BCM6348_CPU_ID:
+       default:
+               return 37;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -10,6 +10,8 @@
+ #define PERF_REV_REG                  0x0
+ #define REV_CHIPID_SHIFT              16
+ #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
++#define REV_LONG_CHIPID_SHIFT         12
++#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
+ #define REV_VARID_SHIFT                       12
+ #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT                       0
+@@ -212,6 +214,52 @@
+                                       CKCTL_6368_NAND_EN |            \
+                                       CKCTL_6368_IPSEC_EN)
++#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
++#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
++#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
++#define CKCTL_63268_VDSL_EN           (1 << 3)
++#define CKCTL_63268_MIPS_EN           (1 << 4)
++#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
++#define CKCTL_63268_DECT_EN           (1 << 6)
++#define CKCTL_63268_FAP0_EN           (1 << 7)
++#define CKCTL_63268_FAP1_EN           (1 << 8)
++#define CKCTL_63268_SAR_EN            (1 << 9)
++#define CKCTL_63268_ROBOSW_EN         (1 << 10)
++#define CKCTL_63268_PCM_EN            (1 << 11)
++#define CKCTL_63268_USBD_EN           (1 << 12)
++#define CKCTL_63268_USBH_EN           (1 << 13)
++#define CKCTL_63268_IPSEC_EN          (1 << 14)
++#define CKCTL_63268_SPI_EN            (1 << 15)
++#define CKCTL_63268_HSSPI_EN          (1 << 16)
++#define CKCTL_63268_PCIE_EN           (1 << 17)
++#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
++#define CKCTL_63268_GMAC_EN           (1 << 19)
++#define CKCTL_63268_NAND_EN           (1 << 20)
++#define CKCTL_63268_TBUS_EN           (1 << 27)
++#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
++
++#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
++                                      CKCTL_63268_VDSL_AFE_EN |       \
++                                      CKCTL_63268_VDSL_EN |           \
++                                      CKCTL_63268_WLAN_OCP_EN |       \
++                                      CKCTL_63268_DECT_EN |           \
++                                      CKCTL_63268_FAP0_EN |           \
++                                      CKCTL_63268_FAP1_EN |           \
++                                      CKCTL_63268_SAR_EN |            \
++                                      CKCTL_63268_ROBOSW_EN |         \
++                                      CKCTL_63268_PCM_EN |            \
++                                      CKCTL_63268_USBD_EN |           \
++                                      CKCTL_63268_USBH_EN |           \
++                                      CKCTL_63268_IPSEC_EN |          \
++                                      CKCTL_63268_SPI_EN |            \
++                                      CKCTL_63268_HSSPI_EN |          \
++                                      CKCTL_63268_PCIE_EN |           \
++                                      CKCTL_63268_PHYMIPS_EN |        \
++                                      CKCTL_63268_GMAC_EN |           \
++                                      CKCTL_63268_NAND_EN |           \
++                                      CKCTL_63268_TBUS_EN |           \
++                                      CKCTL_63268_ROBOSW250_EN)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+@@ -225,6 +273,7 @@
+ #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
+ #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
++#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
+@@ -235,6 +284,7 @@
+ #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
+ #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
+@@ -245,6 +295,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6358      0x14
+ #define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
++#define PERF_EXTIRQ_CFG_REG_63268     0x18
+ #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+@@ -275,6 +326,7 @@
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+ #define PERF_SOFTRESET_6368_REG               0x10
++#define PERF_SOFTRESET_63268_REG      0x10
+ #define SOFTRESET_3368_SPI_MASK               (1 << 0)
+ #define SOFTRESET_3368_ENET_MASK      (1 << 2)
+@@ -368,6 +420,26 @@
+ #define SOFTRESET_6368_USBH_MASK      (1 << 12)
+ #define SOFTRESET_6368_PCM_MASK               (1 << 13)
++#define SOFTRESET_63268_SPI_MASK      (1 << 0)
++#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
++#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
++#define SOFTRESET_63268_SAR_MASK      (1 << 3)
++#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
++#define SOFTRESET_63268_USBS_MASK     (1 << 5)
++#define SOFTRESET_63268_USBH_MASK     (1 << 6)
++#define SOFTRESET_63268_PCM_MASK      (1 << 7)
++#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
++#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
++#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
++#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
++#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
++#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
++#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
++#define SOFTRESET_63268_DECT_MASK     (1 << 15)
++#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
++#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
++#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
++
+ /* MIPS PLL control register */
+ #define PERF_MIPSPLLCTL_REG           0x34
+ #define MIPSPLLCTL_N1_SHIFT           20
+@@ -1367,6 +1439,13 @@
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
++#define MISC_STRAPBUS_63268_REG               0x14
++#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
++#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
++#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
++#define STRAPBUS_63268_FCVO_SHIFT     21
++#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
++      case BCM63268_CPU_ID:
+               if (offset >= 0xb0000000 && offset < 0xb1000000)
+                       return 1;
+               break;
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -184,7 +184,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++              BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -292,7 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -313,6 +315,8 @@ bcm63xx_enetsw_register(const struct bcm
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
++      else if (BCMCPU_IS_63268())
++              enetsw_pd.num_ports = ENETSW_PORTS_63268;
+       enetsw_pd.dma_has_sram = true;
+       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
+ #define ENETSW_MAX_PORT       8
+ #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
+ #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
++#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
+ #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/bcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
new file mode 100644 (file)
index 0000000..e9f9e2b
--- /dev/null
@@ -0,0 +1,55 @@
+From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:22:40 +0100
+Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
+
+---
+ arch/mips/bcm63xx/reset.c                       | 3 ++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
+ arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
+ 3 files changed, 11 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -137,7 +137,8 @@
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+ #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK)
++                               SOFTRESET_63268_PCIE_CORE_MASK | \
++                               SOFTRESET_63268_PCIE_HARD_MASK)
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -46,6 +46,11 @@
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+                                       BCM_PCIE_MEM_SIZE_6328 - 1)
++#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
++#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
++                                      BCM_PCIE_MEM_SIZE_63268 - 1)
++
+ /*
+  * Internal registers are accessed through KSEG3
+  */
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++      } else if (BCMCPU_IS_63268()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
+       }
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
++      case BCM63268_CPU_ID:
+               return bcm63xx_register_pcie();
+       case BCM3368_CPU_ID:
+       case BCM6348_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..b6119e9
--- /dev/null
@@ -0,0 +1,697 @@
+From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 01:24:09 +0100
+Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
+
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |   8 +-
+ arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
+ arch/mips/bcm63xx/dev-flash.c                     |   3 +
+ arch/mips/bcm63xx/dev-spi.c                       |   2 +-
+ arch/mips/bcm63xx/irq.c                           |  10 ++
+ arch/mips/bcm63xx/prom.c                          |   2 +-
+ arch/mips/bcm63xx/reset.c                         |  24 +++++
+ arch/mips/bcm63xx/setup.c                         |   5 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 13 files changed, 291 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -19,6 +19,11 @@ config BCM63XX_EHCI
+       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++config BCM63XX_CPU_6318
++      bool "support 6318 CPU"
++      select SYS_HAS_CPU_BMIPS32_3300
++      select HW_HAS_PCI
++
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -697,7 +697,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+        */
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+               val = 0x18000000;
+       } else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
+ {
+       u32 mask;
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318())
++              mask = CKCTL_6318_HSSPI_EN;
++      else if (BCMCPU_IS_6328())
+               mask = CKCTL_6328_HSSPI_EN;
+       else if (BCMCPU_IS_6362())
+               mask = CKCTL_6362_HSSPI_EN;
+@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
+       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
+ };
++static struct clk_lookup bcm6318_clks[] = {
++      /* fixed rate clocks */
++      CLKDEV_INIT(NULL, "periph", &clk_periph),
++      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      /* gated clocks */
++      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
++      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
++      CLKDEV_INIT(NULL, "usbd", &clk_usbh),
++      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
++      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
++};
++
+ static struct clk_lookup bcm6328_clks[] = {
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
+       CLKDEV_INIT(NULL, "pcie", &clk_pcie),
+ };
++#define HSSPI_PLL_HZ_6318     250000000
+ #define HSSPI_PLL_HZ_6328     133333333
+ #define HSSPI_PLL_HZ_6362     400000000
+@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
+       case BCM3368_CPU_ID:
+               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
+               break;
++      case BCM6318_CPU_ID:
++              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
++              clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
++              break;
+       case BCM6328_CPU_ID:
+               clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
+               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
+       __GEN_CPU_IRQ_TABLE(3368)
+ };
++static const unsigned long bcm6318_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(6318)
++};
++
++static const int bcm6318_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(6318)
++};
++
+ static const unsigned long bcm6328_regs_base[] = {
+       __GEN_CPU_REGS_TABLE(6328)
+ };
+@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
+       return bcm63xx_memory_size;
+ }
++#define STRAP_OVERRIDE_BUS_REG                0x0
++#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
++#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
++
+ static unsigned int detect_cpu_clock(void)
+ {
+       u32 cpu_id = bcm63xx_get_cpu_id();
+@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
+       case BCM3368_CPU_ID:
+               return 300000000;
++      case BCM6318_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
++
++              pr_info("strap_override_bus = %08x\n", tmp);
++
++              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
++                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
++
++              switch (mips_pll_fcvo) {
++              case 0:
++                      return 166000000;
++              case 1:
++                      return 400000000;
++              case 2:
++                      return 250000000;
++              case 3:
++                      return 333000000;
++              };
++      }
+       case BCM6328_CPU_ID:
+       {
+               unsigned int tmp, mips_pll_fcvo;
+@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
++      if (BCMCPU_IS_6318()) {
++              val = bcm_sdram_readl(SDRAM_CFG_REG);
++              val = val & SDRAM_CFG_6318_SPACE_MASK;
++              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
++              return 1 << (val + 20);
++      }
++
+       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
+       switch (current_cpu_type()) {
+       case CPU_BMIPS3300:
++              if ((read_c0_prid() & 0xff) >= 0x33) {
++                      /* BCM6318 */
++                      chipid_reg = BCM_6368_PERF_BASE;
++                      break;
++              }
++
+               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
+                       __cpu_name[cpu] = "Broadcom BCM6338";
+               /* fall-through */
+@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
+       bcm63xx_cpu_variant = bcm63xx_cpu_id;
+       switch (bcm63xx_cpu_id) {
++      case BCM6318_CPU_ID:
++              bcm63xx_regs_base = bcm6318_regs_base;
++              bcm63xx_irqs = bcm6318_irqs;
++              break;
+       case BCM3368_CPU_ID:
+               bcm63xx_regs_base = bcm3368_regs_base;
+               bcm63xx_irqs = bcm3368_irqs;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
+       u32 val;
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              /* only support serial flash */
++              return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
+ int __init bcm63xx_spi_register(void)
+ {
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
+               ext_irqs[3] = BCM_3368_EXT_IRQ3;
+               ext_shift = 4;
+               break;
++      case BCM6318_CPU_ID:
++              periph_bases[0] += PERF_IRQMASK_6318_REG;
++              periph_irq_count = 1;
++              periph_width = 4;
++
++              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
++              ext_irq_count = 4;
++              ext_irqs[0] = BCM_6318_EXT_IRQ0;
++              ext_irqs[1] = BCM_6318_EXT_IRQ0;
++              ext_irqs[2] = BCM_6318_EXT_IRQ0;
++              ext_irqs[3] = BCM_6318_EXT_IRQ0;
++              ext_shift = 4;
++              break;
+       case BCM6328_CPU_ID:
+               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
+               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -68,7 +68,7 @@ void __init prom_init(void)
+                       if (reg & OTP_6328_REG3_TP1_DISABLED)
+                               bmips_smp_enabled = 0;
+-              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
++              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+                       bmips_smp_enabled = 0;
+               }
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -44,6 +44,23 @@
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++
++#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
++#define BCM6318_RESET_ENET    0
++#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
++#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
++#define BCM6318_RESET_DSL     0
++#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
++#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
++#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
++#define BCM6318_RESET_PCM     0
++#define BCM6318_RESET_MPI     0
++#define BCM6318_RESET_PCIE    \
++                              (SOFTRESET_6318_PCIE_MASK |             \
++                               SOFTRESET_6318_PCIE_CORE_MASK |        \
++                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+ #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
+@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
+       __GEN_RESET_BITS_TABLE(3368)
+ };
++static const u32 bcm6318_reset_bits[] = {
++      __GEN_RESET_BITS_TABLE(6318)
++};
++
+ static const u32 bcm6328_reset_bits[] = {
+       __GEN_RESET_BITS_TABLE(6328)
+ };
+@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
+       if (BCMCPU_IS_3368()) {
+               reset_reg = PERF_SOFTRESET_6358_REG;
+               bcm63xx_reset_bits = bcm3368_reset_bits;
++      } else if (BCMCPU_IS_6318()) {
++              reset_reg = PERF_SOFTRESET_6318_REG;
++              bcm63xx_reset_bits = bcm6318_reset_bits;
+       } else if (BCMCPU_IS_6328()) {
+               reset_reg = PERF_SOFTRESET_6328_REG;
+               bcm63xx_reset_bits = bcm6328_reset_bits;
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
+       case BCM3368_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+               break;
++      case BCM6318_CPU_ID:
++              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
++              break;
+       case BCM6328_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+               break;
+@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
+               bcm6348_a1_reboot();
+       pr_info("triggering watchdog soft-reset...\n");
+-      if (BCMCPU_IS_6328()) {
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
+               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+       } else {
+               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -11,6 +11,7 @@
+  * arm mach-types)
+  */
+ #define BCM3368_CPU_ID                0x3368
++#define BCM6318_CPU_ID                0x6318
+ #define BCM6328_CPU_ID                0x6328
+ #define BCM63281_CPU_ID               0x63281
+ #define BCM63283_CPU_ID               0x63283
+@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
+               case BCM3368_CPU_ID:
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++              case BCM6318_CPU_ID:
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6328
+               case BCM6328_CPU_ID:
+ #endif
+@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ }
+ #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
+ #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+ #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+ #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_VARIANT_IS_3368() \
+       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6318() \
++      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63281() \
+       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63283() \
+@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
+ #define BCM_3368_MISC_BASE            (0xdeadbeef)
+ /*
++ * 6318 register sets base address
++ */
++#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
++#define BCM_6318_PERF_BASE            (0xb0000000)
++#define BCM_6318_TIMER_BASE           (0xb0000040)
++#define BCM_6318_WDT_BASE             (0xb0000068)
++#define BCM_6318_UART0_BASE           (0xb0000100)
++#define BCM_6318_UART1_BASE           (0xdeadbeef)
++#define BCM_6318_GPIO_BASE            (0xb0000080)
++#define BCM_6318_SPI_BASE             (0xdeadbeef)
++#define BCM_6318_HSSPI_BASE           (0xb0003000)
++#define BCM_6318_UDC0_BASE            (0xdeadbeef)
++#define BCM_6318_USBDMA_BASE          (0xb0006800)
++#define BCM_6318_OHCI0_BASE           (0xb0005100)
++#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
++#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
++#define BCM_6318_USBD_BASE            (0xb0006000)
++#define BCM_6318_MPI_BASE             (0xdeadbeef)
++#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
++#define BCM_6318_PCIE_BASE            (0xb0010000)
++#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
++#define BCM_6318_DSL_BASE             (0xdeadbeef)
++#define BCM_6318_UBUS_BASE            (0xdeadbeef)
++#define BCM_6318_ENET0_BASE           (0xdeadbeef)
++#define BCM_6318_ENET1_BASE           (0xdeadbeef)
++#define BCM_6318_ENETDMA_BASE         (0xb0088000)
++#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
++#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
++#define BCM_6318_ENETSW_BASE          (0xb0080000)
++#define BCM_6318_EHCI0_BASE           (0xb0005000)
++#define BCM_6318_SDRAM_BASE           (0xb0004000)
++#define BCM_6318_MEMC_BASE            (0xdeadbeef)
++#define BCM_6318_DDR_BASE             (0xdeadbeef)
++#define BCM_6318_M2M_BASE             (0xdeadbeef)
++#define BCM_6318_ATM_BASE             (0xdeadbeef)
++#define BCM_6318_XTM_BASE             (0xdeadbeef)
++#define BCM_6318_XTMDMA_BASE          (0xb000c000)
++#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_PCM_BASE             (0xdeadbeef)
++#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
++#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
++#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
++#define BCM_6318_RNG_BASE             (0xdeadbeef)
++#define BCM_6318_MISC_BASE            (0xb0000280)
++#define BCM_6318_OTP_BASE             (0xdeadbeef)
++
++#define BCM_6318_STRAP_BASE           (0xb0000900)
++
++/*
+  * 6328 register sets base address
+  */
+ #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
+@@ -775,6 +833,55 @@ enum bcm63xx_irq {
+ #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
+ #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
++/*
++ * 6318 irqs
++ */
++#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
++#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
++
++#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
++#define BCM_6318_SPI_IRQ              0
++#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
++#define BCM_6318_UART1_IRQ            0
++#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
++#define BCM_6318_UDC0_IRQ             0
++#define BCM_6318_ENET0_IRQ            0
++#define BCM_6318_ENET1_IRQ            0
++#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
++#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
++#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
++#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
++#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
++#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
++#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
++#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
++#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
++#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
++#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
++#define BCM_6318_PCMCIA_IRQ           0
++#define BCM_6318_ENET0_RXDMA_IRQ      0
++#define BCM_6318_ENET0_TXDMA_IRQ      0
++#define BCM_6318_ENET1_RXDMA_IRQ      0
++#define BCM_6318_ENET1_TXDMA_IRQ      0
++#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
++#define BCM_6318_ATM_IRQ              0
++#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
++#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
++#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
++#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
++#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
++#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
++#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
++#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
++#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
++#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
++
++#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
++#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
++#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
++#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
++#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
++#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
+ /*
+  * 6328 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -53,6 +53,39 @@
+                                        CKCTL_3368_EMUSB_EN | \
+                                        CKCTL_3368_USBU_EN)
++#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
++#define CKCTL_6318_USB_ASB_EN         (1 << 1)
++#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
++#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
++#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
++#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
++#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
++#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
++#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
++#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
++#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
++#define CKCTL_6318_ADSL_EN            (1 << 11)
++#define CKCTL_6318_SAR125_EN          (1 << 12)
++#define CKCTL_6318_MIPS_EN            (1 << 13)
++#define CKCTL_6318_PCIE_EN            (1 << 14)
++#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
++#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
++#define CKCTL_6318_SDR_EN             (1 << 19)
++#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
++#define CKCTL_6318_HSSPI_EN           (1 << 25)
++#define CKCTL_6318_PCIE25_EN          (1 << 27)
++#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
++#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
++#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
++
++#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
++                                      CKCTL_6318_ADSL_QPROC_EN |      \
++                                      CKCTL_6318_ADSL_AFE_EN |        \
++                                      CKCTL_6318_ADSL_EN |            \
++                                      CKCTL_6318_SAR_EN  |            \
++                                      CKCTL_6318_USB_EN |             \
++                                      CKCTL_6318_PCIE_EN)
++
+ #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
+ #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
+ #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
+@@ -260,12 +293,27 @@
+                                       CKCTL_63268_TBUS_EN |           \
+                                       CKCTL_63268_ROBOSW250_EN)
++/* UBUS Clock Control register */
++#define PERF_UB_CKCTL_REG             0x10
++
++#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
++#define UB_CKCTL_6318_ARB_EN          (1 << 1)
++#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
++#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
++#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
++#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
++#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
++#define UB_CKCTL_6318_SAR_EN          (1 << 7)
++#define UB_CKCTL_6318_SDR_EN          (1 << 8)
++#define UB_CKCTL_6318_USB_EN          (1 << 9)
++
+ /* System PLL Control register        */
+ #define PERF_SYS_PLL_CTL_REG          0x8
+ #define SYS_PLL_SOFT_RESET            0x1
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG         0xc
++#define PERF_IRQMASK_6318_REG         0x20
+ #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG         0xc
+ #define PERF_IRQMASK_6345_REG         0xc
+@@ -277,6 +325,7 @@
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG         0x10
++#define PERF_IRQSTAT_6318_REG         0x30
+ #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG         0x10
+ #define PERF_IRQSTAT_6345_REG         0x10
+@@ -288,6 +337,7 @@
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368      0x14
++#define PERF_EXTIRQ_CFG_REG_6318      0x18
+ #define PERF_EXTIRQ_CFG_REG_6328      0x18
+ #define PERF_EXTIRQ_CFG_REG_6338      0x14
+ #define PERF_EXTIRQ_CFG_REG_6345      0x14
+@@ -322,6 +372,7 @@
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG            0x28
++#define PERF_SOFTRESET_6318_REG               0x10
+ #define PERF_SOFTRESET_6328_REG               0x10
+ #define PERF_SOFTRESET_6358_REG               0x34
+ #define PERF_SOFTRESET_6362_REG               0x10
+@@ -335,6 +386,18 @@
+ #define SOFTRESET_3368_USBS_MASK      (1 << 11)
+ #define SOFTRESET_3368_PCM_MASK               (1 << 13)
++#define SOFTRESET_6318_SPI_MASK               (1 << 0)
++#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
++#define SOFTRESET_6318_SAR_MASK               (1 << 2)
++#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
++#define SOFTRESET_6318_USBS_MASK      (1 << 4)
++#define SOFTRESET_6318_USBH_MASK      (1 << 5)
++#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
++#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
++#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
++#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
++#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
++
+ #define SOFTRESET_6328_SPI_MASK               (1 << 0)
+ #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
+ #define SOFTRESET_6328_SAR_MASK               (1 << 2)
+@@ -506,8 +569,17 @@
+ #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
+ #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
++#define TIMER_IRQMASK_6318_REG                0x0
++#define TIMER_IRQSTAT_6318_REG                0x4
++#define IRQSTATMASK_TIMER0            (1 << 0)
++#define IRQSTATMASK_TIMER1            (1 << 1)
++#define IRQSTATMASK_TIMER2            (1 << 2)
++#define IRQSTATMASK_TIMER3            (1 << 3)
++#define IRQSTATMASK_WDT                       (1 << 4)
++
+ /* Timer control register */
+ #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
++#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
+ #define TIMER_CTL0_REG                        0x4
+ #define TIMER_CTL1_REG                        0x8
+ #define TIMER_CTL2_REG                        0xC
+@@ -1254,6 +1326,8 @@
+ #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
+ #define SDRAM_CFG_BANK_SHIFT          13
+ #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
++#define SDRAM_CFG_6318_SPACE_SHIFT    4
++#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
+ #define SDRAM_MBASE_REG                       0xc
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
+               if (offset >= 0xfff00000)
+                       return 1;
+               break;
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_63268())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-usb-usbd.c
++++ b/arch/mips/bcm63xx/dev-usb-usbd.c
+@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
+               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
+       int i;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+               return 0;
+       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -184,8 +184,8 @@ static int __init register_shared(void)
+       else
+               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+-              BCMCPU_IS_63268())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++              BCMCPU_IS_6368() || BCMCPU_IS_63268())
+               chan_count = 32;
+       else if (BCMCPU_IS_6345())
+               chan_count = 8;
+@@ -293,8 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
+-              !BCMCPU_IS_63268())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return -ENODEV;
+       ret = register_shared();
+@@ -311,7 +311,7 @@ bcm63xx_enetsw_register(const struct bcm
+       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
+       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
++              return 50;
+       case BCM6328_CPU_ID:
+               return 32;
+       case BCM3368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/bcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/bcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
new file mode 100644 (file)
index 0000000..e359311
--- /dev/null
@@ -0,0 +1,156 @@
+From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 14:17:50 +0100
+Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
+
+---
+ arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
+ arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
+ 3 files changed, 34 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -29,7 +29,9 @@
+       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
+       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
+       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
+-      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
++      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
++      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
++      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
+ #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
+ #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
+@@ -43,6 +45,8 @@
+ #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
+ #define BCM3368_RESET_PCIE    0
+ #define BCM3368_RESET_PCIE_EXT        0
++#define BCM3368_RESET_PCIE_CORE       0
++#define BCM3368_RESET_PCIE_HARD       0
+ #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
+@@ -55,11 +59,10 @@
+ #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
+ #define BCM6318_RESET_PCM     0
+ #define BCM6318_RESET_MPI     0
+-#define BCM6318_RESET_PCIE    \
+-                              (SOFTRESET_6318_PCIE_MASK |             \
+-                               SOFTRESET_6318_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
+ #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
++#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
++#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
+ #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET    0
+@@ -71,11 +74,10 @@
+ #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
+ #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
+ #define BCM6328_RESET_MPI     0
+-#define BCM6328_RESET_PCIE    \
+-                              (SOFTRESET_6328_PCIE_MASK |             \
+-                               SOFTRESET_6328_PCIE_CORE_MASK |        \
+-                               SOFTRESET_6328_PCIE_HARD_MASK)
++#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
+ #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
++#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
++#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
+ #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
+ #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
+@@ -89,6 +91,8 @@
+ #define BCM6338_RESET_MPI     0
+ #define BCM6338_RESET_PCIE    0
+ #define BCM6338_RESET_PCIE_EXT        0
++#define BCM6338_RESET_PCIE_CORE       0
++#define BCM6338_RESET_PCIE_HARD       0
+ #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
+ #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
+@@ -102,6 +106,8 @@
+ #define BCM6348_RESET_MPI     0
+ #define BCM6348_RESET_PCIE    0
+ #define BCM6348_RESET_PCIE_EXT        0
++#define BCM6348_RESET_PCIE_CORE       0
++#define BCM6348_RESET_PCIE_HARD       0
+ #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
+ #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
+@@ -115,6 +121,8 @@
+ #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
+ #define BCM6358_RESET_PCIE    0
+ #define BCM6358_RESET_PCIE_EXT        0
++#define BCM6358_RESET_PCIE_CORE       0
++#define BCM6358_RESET_PCIE_HARD       0
+ #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
+ #define BCM6362_RESET_ENET    0
+@@ -126,9 +134,10 @@
+ #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
+ #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
+ #define BCM6362_RESET_MPI     0
+-#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
+-                               SOFTRESET_6362_PCIE_CORE_MASK)
++#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
+ #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
++#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
++#define BCM6362_RESET_PCIE_HARD       0
+ #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
+ #define BCM6368_RESET_ENET    0
+@@ -142,6 +151,8 @@
+ #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
+ #define BCM6368_RESET_PCIE    0
+ #define BCM6368_RESET_PCIE_EXT        0
++#define BCM6368_RESET_PCIE_CORE       0
++#define BCM6368_RESET_PCIE_HARD       0
+ #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
+ #define BCM63268_RESET_ENET   0
+@@ -153,10 +164,10 @@
+ #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
+ #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI    0
+-#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
+-                               SOFTRESET_63268_PCIE_CORE_MASK | \
+-                               SOFTRESET_63268_PCIE_HARD_MASK)
++#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
+ #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
++#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
++#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
+ /*
+  * core reset bits
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
+@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
+       BCM63XX_RESET_MPI,
+       BCM63XX_RESET_PCIE,
+       BCM63XX_RESET_PCIE_EXT,
++      BCM63XX_RESET_PCIE_CORE,
++      BCM63XX_RESET_PCIE_HARD,
+ };
+ void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
+       /* reset the PCIe core */
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
++              mdelay(10);
++              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
++      }
+       mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
+       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
+       mdelay(10);
diff --git a/target/linux/bcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..3d9835d
--- /dev/null
@@ -0,0 +1,333 @@
+From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:47:34 +0100
+Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
+
+---
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
+ arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
+ arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
+ 5 files changed, 184 insertions(+), 29 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
+       bcm_perf_writel(reg, PERF_CKCTL_REG);
+ }
++static void bcm_ub_hwclock_set(u32 mask, int enable)
++{
++      u32 reg;
++
++      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
++      if (enable)
++              reg |= mask;
++      else
++              reg &= ~mask;
++      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
+ static void pcie_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
++              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
++      }
+ }
+ static struct clk clk_pcie = {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,6 +41,12 @@
+ #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
+                                       BCM_CB_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
++#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
++                                      BCM_PCIE_MEM_SIZE_6318 - 1)
++
++
+ #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
+ #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1530,6 +1530,17 @@
+  * _REG relative to RSET_PCIE
+  *************************************************************************/
++#define PCIE_SPECIFIC_REG             0x188
++#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
++#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
++#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
++#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
++#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
++#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
++
+ #define PCIE_CONFIG2_REG              0x408
+ #define CONFIG2_BAR1_SIZE_EN          1
+ #define CONFIG2_BAR1_SIZE_MASK                0xf
+@@ -1575,7 +1586,54 @@
+ #define PCIE_RC_INT_C                 (1 << 2)
+ #define PCIE_RC_INT_D                 (1 << 3)
+-#define PCIE_DEVICE_OFFSET            0x8000
++#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
++#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
++#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
++#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
++#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
++#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
++#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
++
++#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
++#define RC_BAR_CFG_LO_SIZE_256MB      0xd
++#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
++#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
++
++#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
++#define C2P_BASELIMIT_LIMIT_SHIFT     20
++#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
++#define C2P_BASELIMIT_BASE_SHIFT      4
++#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
++
++#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
++#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
++#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
++#define BAR1_CFG_REMAP_ACCESS_EN      1
++
++#define PCIE_HARD_DEBUG_REG           0x4204
++#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
++
++#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
++#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
++#define CPU_INT_PCIE_INTA             (1 << 1)
++#define CPU_INT_PCIE_INTB             (1 << 2)
++#define CPU_INT_PCIE_INTC             (1 << 3)
++#define CPU_INT_PCIE_INTD             (1 << 4)
++#define CPU_INT_PCIE_INTR             (1 << 5)
++#define CPU_INT_PCIE_NMI              (1 << 6)
++#define CPU_INT_PCIE_UBUS             (1 << 7)
++#define CPU_INT_IPI                   (1 << 8)
++
++#define PCIE_EXT_CFG_INDEX_REG                0x8400
++#define EXT_CFG_FUNC_NUM_SHIFT                12
++#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
++#define EXT_CFG_DEV_NUM_SHIFT         15
++#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
++#define EXT_CFG_BUS_NUM_SHIFT         20
++#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
++
++#define PCIE_DEVICE_OFFSET_6318               0x9000
++#define PCIE_DEVICE_OFFSET_6328               0x8000
+ /*************************************************************************
+  * _REG relative to RSET_OTP
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
+       if (!bcm63xx_pcie_can_access(bus, devfn))
+               return PCIBIOS_DEVICE_NOT_FOUND;
+-      if (bus->number == PCIE_BUS_DEVICE)
+-              reg += PCIE_DEVICE_OFFSET;
++      if (bus->number == PCIE_BUS_DEVICE) {
++              if (BCMCPU_IS_6318())
++                      reg += PCIE_DEVICE_OFFSET_6318;
++              else
++                      reg += PCIE_DEVICE_OFFSET_6328;
++      }
+       data = bcm_pcie_readl(reg);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
+ void __iomem *pci_iospace_start;
+-static void __init bcm63xx_reset_pcie(void)
++static void __init bcm63xx_reset_pcie_gen1(void)
+ {
+       u32 val;
+       u32 reg;
+@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
+       mdelay(200);
+ }
+-static struct clk *pcie_clk;
+-
+-static int __init bcm63xx_register_pcie(void)
++static void __init bcm63xx_reset_pcie_gen2(void)
+ {
+       u32 val;
+-      /* enable clock */
+-      pcie_clk = clk_get(NULL, "pcie");
+-      if (IS_ERR_OR_NULL(pcie_clk))
+-              return -ENODEV;
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
+-      clk_prepare_enable(pcie_clk);
++      /* reset the PCIe core */
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
++      mdelay(10);
++      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
++      val &= ~HARD_DEBUG_SERDES_IDDQ;
++      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
++      mdelay(10);
++      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
++      mdelay(200);
++}
+-      bcm63xx_reset_pcie();
++static void __init bcm63xx_init_pcie_gen1(void)
++{
++      u32 val;
+       /* configure the PCIe bridge */
+       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
+       val |= OPT2_CFG_TYPE1_BD_SEL;
+       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
++      /* set bar0 to little endian */
++      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
++      val |= BASEMASK_REMAP_EN;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
++
++      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
++      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
++}
++
++static void __init bcm63xx_init_pcie_gen2(void)
++{
++      u32 val;
++
++      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
++                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
++                      PCIE_CPU_INT1_MASK_CLEAR_REG);
++
++      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
++      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
++             C2P_BASELIMIT_BASE_SHIFT;
++
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
++
++      /* set bar0 to little endian */
++      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
++      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
++      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++
++      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
++      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
++      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
++
++      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
++                      PCIE_EXT_CFG_INDEX_REG);
++}
++
++static struct clk *pcie_clk;
++
++static int __init bcm63xx_register_pcie(void)
++{
++      u32 val;
++
++      /* enable clock */
++      pcie_clk = clk_get(NULL, "pcie");
++      if (IS_ERR_OR_NULL(pcie_clk))
++              return -ENODEV;
++
++      clk_prepare_enable(pcie_clk);
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++              bcm63xx_reset_pcie_gen1();
++              bcm63xx_init_pcie_gen1();
++      } else {
++              bcm63xx_reset_pcie_gen2();
++              bcm63xx_init_pcie_gen2();
++      }
++
+       /* setup class code as bridge */
+       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+       val &= ~IDVAL3_CLASS_CODE_MASK;
+@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
+       val &= ~CONFIG2_BAR1_SIZE_MASK;
+       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+-      /* set bar0 to little endian */
+-      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
+-      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+-      val |= BASEMASK_REMAP_EN;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-
+-      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+-      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+-
+       register_pci_controller(&bcm63xx_pcie_controller);
+       return 0;
+@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
+       if (!bcm63xx_pci_enabled)
+               return -ENODEV;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++      if (BCMCPU_IS_6318()) {
++              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
++              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
++      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
+       } else if (BCMCPU_IS_63268()) {
+@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
+       }
+       switch (bcm63xx_get_cpu_id()) {
++      case BCM6318_CPU_ID:
+       case BCM6328_CPU_ID:
+       case BCM6362_CPU_ID:
+       case BCM63268_CPU_ID:
diff --git a/target/linux/bcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/bcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
new file mode 100644 (file)
index 0000000..298fffd
--- /dev/null
@@ -0,0 +1,74 @@
+From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 12:26:57 +0100
+Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
+ result
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
+ arch/mips/bcm63xx/prom.c                               |  4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 3 files changed, 13 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -22,6 +22,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
++static int flash_type;
++
+ static struct mtd_partition mtd_partitions[] = {
+       {
+               .name           = "cfe",
+@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++void __init bcm63xx_flash_detect(void)
++{
++      flash_type = bcm63xx_detect_flash_type();
++}
++
+ int __init bcm63xx_flash_register(void)
+ {
+-      int flash_type;
+       u32 val;
+-      flash_type = bcm63xx_detect_flash_type();
+-
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+               /* read base address of boot chip select (0) */
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -17,6 +17,7 @@
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_dev_flash.h>
+ void __init prom_init(void)
+ {
+@@ -52,6 +53,9 @@ void __init prom_init(void)
+       reg &= ~mask;
+       bcm_perf_writel(reg, PERF_CKCTL_REG);
++      /* detect and setup flash access */
++      bcm63xx_flash_detect();
++
+       /* do low level board init */
+       board_prom_init();
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -8,6 +8,8 @@ enum {
+       BCM63XX_FLASH_TYPE_NAND,
+ };
++void bcm63xx_flash_detect(void);
++
+ int __init bcm63xx_flash_register(void);
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/bcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644 (file)
index 0000000..329a156
--- /dev/null
@@ -0,0 +1,84 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 51 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -16,6 +16,7 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/mtd/spi-nor.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
+       }
+ }
++#define HSSPI_FLASH_CTRL_REG          0x14
++#define FLASH_CTRL_READ_OPCODE_MASK   0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
++#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
++#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
++#define FLASH_CTRL_MB_EN              (1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+       flash_type = bcm63xx_detect_flash_type();
++
++      /* ensure flash mapping has sane values */
++      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++           BCMCPU_IS_63268())) {
++              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++              if (val & FLASH_CTRL_MB_EN) {
++                      /* cfe might configure non working dual-io mode */
++                      val &= ~FLASH_CTRL_MB_EN;
++                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
++                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
++
++                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++                      case FLASH_CTRL_ADDR_BYTES_3:
++                              val |= SPINOR_OP_READ_FAST;
++                              break;
++                      case FLASH_CTRL_ADDR_BYTES_4:
++                              val |= SPINOR_OP_READ_FAST_4B;
++                              break;
++                      case FLASH_CTRL_ADDR_BYTES_2:
++                      default:
++                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
++                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
++                              return;
++                      }
++              } else {
++                      /* ensure dummy bytes is set to 1 for _FAST reads */
++                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
++
++                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
++                              return;
++
++                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
++                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
++              }
++
++              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++      }
+ }
+ int __init bcm63xx_flash_register(void)
diff --git a/target/linux/bcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/bcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
new file mode 100644 (file)
index 0000000..a8eea5b
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328()) {
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
++                              CKCTL_6318_ROBOSW025_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
+       } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
+@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
+  */
+ static void usbh_set(struct clk *clk, int enable)
+ {
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6318()) {
++              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
++              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
++      } else if (BCMCPU_IS_6328()) {
+               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
+-      else if (BCMCPU_IS_6348())
++      } else if (BCMCPU_IS_6348()) {
+               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+-      else if (BCMCPU_IS_6362())
++      } else if (BCMCPU_IS_6362()) {
+               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+-      else if (BCMCPU_IS_6368())
++      } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+-      else if (BCMCPU_IS_63268())
++      } else if (BCMCPU_IS_63268()) {
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+-      else
++      } else {
+               return;
++      }
+       if (enable)
+               msleep(100);
diff --git a/target/linux/bcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch b/target/linux/bcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch
new file mode 100644 (file)
index 0000000..92c37c1
--- /dev/null
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_6318()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+       }
+       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -682,6 +682,12 @@
+ #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
+ #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
++#define GPIO_PINMUX_SEL0_6318         0x1c
++#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
++#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
+ #define GPIO_PINMUX_OTHR_REG          0x24
+ #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
+@@ -1000,6 +1006,7 @@
+ #define USBH_PRIV_SWAP_6358_REG               0x0
+ #define USBH_PRIV_SWAP_6368_REG               0x1c
++#define USBH_PRIV_SWAP_6318_REG               0x0c
+ #define USBH_PRIV_SWAP_USBD_SHIFT     6
+ #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
+@@ -1025,6 +1032,13 @@
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
++#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
++#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
++
+ /*************************************************************************
+  * _REG relative to RSET_USBD
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
++
++#if IS_ENABLED(CONFIG_USB)
++      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
++              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
++              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
++              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
++              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
++      }
++#endif
+ }
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
+       bool "support 6318 CPU"
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
diff --git a/target/linux/bcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/bcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
new file mode 100644 (file)
index 0000000..cdff8d5
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -587,6 +587,9 @@
+ #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
+ #define TIMER_CTL_ENABLE_MASK         (1 << 31)
++/* Clock reset control (63268 only) */
++#define TIMER_CLK_RST_CTL_REG         0x2c
++#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
+ /*************************************************************************
+  * _REG relative to RSET_WDT
+@@ -1534,6 +1537,11 @@
+ #define STRAPBUS_63268_FCVO_SHIFT     21
+ #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
++#define MISC_IDDQ_CTRL_6328_REG               0x48
++#define MISC_IDDQ_CTRL_63268_REG      0x4c
++
++#define IDDQ_CTRL_63268_USBH          (1 << 4)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
+       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
+ }
++static void bcm_misc_iddq_set(u32 mask, int enable)
++{
++      u32 offset;
++      u32 reg;
++
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++              offset = MISC_IDDQ_CTRL_6328_REG;
++      else if (BCMCPU_IS_63268())
++              offset = MISC_IDDQ_CTRL_63268_REG;
++      else
++              return;
++
++      reg = bcm_misc_readl(offset);
++      if (enable)
++              reg &= ~mask;
++      else
++              reg |= mask;
++      bcm_misc_writel(reg, offset);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
+       } else if (BCMCPU_IS_6368()) {
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+       } else if (BCMCPU_IS_63268()) {
++              u32 reg;
++
+               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
++              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
++              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
++              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
++              if (enable)
++                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
++              else
++                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
++              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
+       } else {
+               return;
+       }
diff --git a/target/linux/bcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/bcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
new file mode 100644 (file)
index 0000000..41f48b9
--- /dev/null
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1034,11 +1034,18 @@
+ #define USBH_PRIV_SETUP_6368_REG      0x28
+ #define USBH_PRIV_SETUP_IOC_SHIFT     4
+ #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_IPP_SHIFT     5
++#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
+ #define USBH_PRIV_SETUP_6318_REG      0x00
++#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
+ #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
+-#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
+-#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
++
++#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
++#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
++#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
++#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
++
+ #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
+ #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
+       bool "support 63268 CPU"
+       select SYS_HAS_CPU_BMIPS4350
+       select HW_HAS_PCI
++      select BCM63XX_OHCI
++      select BCM63XX_EHCI
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+-              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
+@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+               reg |= USBH_PRIV_SETUP_IOC_MASK;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++      } else if (BCMCPU_IS_63268()) {
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++              reg |= USBH_PRIV_SETUP_IOC_MASK;
++              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+       } else if (BCMCPU_IS_6318()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/bcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/bcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
new file mode 100644 (file)
index 0000000..35c2ef6
--- /dev/null
@@ -0,0 +1,108 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -40,6 +40,7 @@ struct board_info {
+       /* USB config */
+       struct bcm63xx_usbd_platform_data usbd;
++      unsigned int num_usbh_ports:2;
+       /* GPIO LEDs */
+       struct gpio_led leds[5];
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_EHCI_H_
+ #define BCM63XX_DEV_USB_EHCI_H_
+-int bcm63xx_ehci_register(void);
++int bcm63xx_ehci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_OHCI_H_
+ #define BCM63XX_DEV_USB_OHCI_H_
+-int bcm63xx_ohci_register(void);
++int bcm63xx_ohci_register(unsigned int num_ports);
+ #endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
+  */
+ int __init board_register_devices(void)
+ {
++      int usbh_ports = 0;
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -186,14 +188,21 @@ int __init board_register_devices(void)
+           !board_get_mac_address(board.enetsw.mac_addr))
+               bcm63xx_enetsw_register(&board.enetsw);
++      if ((board.has_ohci0 || board.has_ehci0)) {
++              usbh_ports = board.num_usbh_ports;
++
++              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
++                      usbh_ports = 1;
++      }
++
+       if (board.has_usbd)
+               bcm63xx_usbd_register(&board.usbd);
+       if (board.has_ehci0)
+-              bcm63xx_ehci_register();
++              bcm63xx_ehci_register(usbh_ports);
+       if (board.has_ohci0)
+-              bcm63xx_ohci_register();
++              bcm63xx_ohci_register(usbh_ports);
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
+       },
+ };
+-int __init bcm63xx_ehci_register(void)
++int __init bcm63xx_ehci_register(unsigned int num_ports)
+ {
+       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+               return 0;
++      bcm63xx_ehci_pdata.num_ports = num_ports;       
++
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+       ehci_resources[0].end = ehci_resources[0].start;
+       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
+       .no_big_frame_no        = 1,
+-      .num_ports              = 1,
+       .power_on               = bcm63xx_ohci_power_on,
+       .power_off              = bcm63xx_ohci_power_off,
+       .power_suspend          = bcm63xx_ohci_power_off,
+@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
+       },
+ };
+-int __init bcm63xx_ohci_register(void)
++int __init bcm63xx_ohci_register(unsigned int num_ports)
+ {
+       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+               return -ENODEV;
++      bcm63xx_ohci_pdata.num_ports = num_ports;
++
+       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+       ohci_resources[0].end = ohci_resources[0].start;
+       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.19/351-set-board-usbh-ports.patch b/target/linux/bcm63xx/patches-4.19/351-set-board-usbh-ports.patch
new file mode 100644 (file)
index 0000000..531adc9
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -576,6 +576,7 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
+       .leds = {
+               {
diff --git a/target/linux/bcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/bcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
new file mode 100644 (file)
index 0000000..deca226
--- /dev/null
@@ -0,0 +1,95 @@
+From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Jun 2014 12:47:49 +0200
+Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
+ board type
+
+Use the arguments passed to the kernel to detect being booted with
+CFE as the indicator for bcm963xx board support, allowing the
+non presence of CFE_EPTSEAL to assume a different board type.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
+ arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
+ 4 files changed, 23 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -1,11 +1,10 @@
+ # SPDX-License-Identifier: GPL-2.0
+-choice
+-      prompt "Board support"
++menu "Board support"
+       depends on BCM63XX
+-      default BOARD_BCM963XX
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
++      default y
+-endchoice
++endmenu
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -686,7 +686,7 @@ static const struct board_info __initcon
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+-void __init board_prom_init(void)
++void __init board_bcm963xx_init(void)
+ {
+       unsigned int i;
+       u8 *boot_addr, *cfe;
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -13,6 +13,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/fw/cfe/cfe_api.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_uart.h>
+@@ -30,6 +32,8 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include "board_common.h"
++
+ #define PFX   "board: "
+ static struct board_info board;
+@@ -80,6 +84,15 @@ const char *board_get_name(void)
+       return board.name;
+ }
++void __init board_prom_init(void)
++{
++      /* detect bootloader */
++      if (fw_arg3 == CFE_EPTSEAL)
++              board_bcm963xx_init();
++      else
++              panic("unsupported bootloader detected");
++}
++
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+ /*
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -6,4 +6,10 @@
+ void board_early_setup(const struct board_info *board,
+                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
++#if defined(CONFIG_BOARD_BCM963XX)
++void board_bcm963xx_init(void);
++#else
++static inline void board_bcm963xx_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
new file mode 100644 (file)
index 0000000..846f0b8
--- /dev/null
@@ -0,0 +1,61 @@
+From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:28:14 +0100
+Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
+ flash address
+
+Allow board implementations to force the physmap address.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 2 files changed, 16 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
+       },
+ };
++void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
++{
++      mtd_resources[0].start = start;
++      mtd_resources[0].end = end;
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+       u32 val;
+@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
+-              /* read base address of boot chip select (0) */
+-              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+-              val &= MPI_CSBASE_BASE_MASK;
+-              mtd_resources[0].start = val;
+-              mtd_resources[0].end = 0x1FFFFFFF;
++              if (!mtd_resources[0].start) {
++                      /* read base address of boot chip select (0) */
++                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++                      val &= MPI_CSBASE_BASE_MASK;
++
++                      mtd_resources[0].start = val;
++                      mtd_resources[0].end = 0x1FFFFFFF;
++              }
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -10,6 +10,8 @@ enum {
+ void bcm63xx_flash_detect(void);
++void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
++
+ int __init bcm63xx_flash_register(void);
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/bcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
new file mode 100644 (file)
index 0000000..886fb2d
--- /dev/null
@@ -0,0 +1,189 @@
+From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:31:12 +0200
+Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
+ unit
+
+In preparation for enhancing it, move it into its own file. Require a
+mac address to be passed as the argument to always "reserve" the mac
+regardless of the inclusion state of SSB.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |  2 +-
+ arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
+ arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
+ 4 files changed, 83 insertions(+), 48 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/sprom.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,8 @@
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
+-                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
++                 sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -39,44 +39,6 @@
+ static struct board_info board;
+ /*
+- * Register a sane SPROMv2 to make the on-board
+- * bcm4318 WLAN work
+- */
+-#ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
+-      .revision               = 0x02,
+-      .board_rev              = 0x17,
+-      .country_code           = 0x0,
+-      .ant_available_bg       = 0x3,
+-      .pa0b0                  = 0x15ae,
+-      .pa0b1                  = 0xfa85,
+-      .pa0b2                  = 0xfe8d,
+-      .pa1b0                  = 0xffff,
+-      .pa1b1                  = 0xffff,
+-      .pa1b2                  = 0xffff,
+-      .gpio0                  = 0xff,
+-      .gpio1                  = 0xff,
+-      .gpio2                  = 0xff,
+-      .gpio3                  = 0xff,
+-      .maxpwr_bg              = 0x004c,
+-      .itssi_bg               = 0x00,
+-      .boardflags_lo          = 0x2848,
+-      .boardflags_hi          = 0x0000,
+-};
+-
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+-{
+-      if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+-              return 0;
+-      } else {
+-              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+-              return -EINVAL;
+-      }
+-}
+-#endif
+-
+-/*
+  * return board name for /proc/cpuinfo
+  */
+ const char *board_get_name(void)
+@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++      u8 mac[ETH_ALEN];
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -220,15 +183,10 @@ int __init board_register_devices(void)
+       /* Generate MAC address for WLAN and register our SPROM,
+        * do this after registering enet devices
+        */
+-#ifdef CONFIG_SSB_PCIHOST
+-      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+-              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+-              if (ssb_arch_register_fallback_sprom(
+-                              &bcm63xx_get_fallback_sprom) < 0)
+-                      pr_err(PFX "failed to register fallback SPROM\n");
+-      }
+-#endif
++
++      if (board_get_mac_address(mac) ||
++          bcm63xx_register_fallback_sprom(mac))
++              pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- /dev/null
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -0,0 +1,70 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/ssb/ssb.h>
++#include <bcm63xx_fallback_sprom.h>
++#include <board_bcm963xx.h>
++
++#define PFX   "sprom: "
++
++/*
++ * Register a sane SPROMv2 to make the on-board
++ * bcm4318 WLAN work
++ */
++#ifdef CONFIG_SSB_PCIHOST
++static struct ssb_sprom bcm63xx_sprom = {
++      .revision               = 0x02,
++      .board_rev              = 0x17,
++      .country_code           = 0x0,
++      .ant_available_bg       = 0x3,
++      .pa0b0                  = 0x15ae,
++      .pa0b1                  = 0xfa85,
++      .pa0b2                  = 0xfe8d,
++      .pa1b0                  = 0xffff,
++      .pa1b1                  = 0xffff,
++      .pa1b2                  = 0xffff,
++      .gpio0                  = 0xff,
++      .gpio1                  = 0xff,
++      .gpio2                  = 0xff,
++      .gpio3                  = 0xff,
++      .maxpwr_bg              = 0x004c,
++      .itssi_bg               = 0x00,
++      .boardflags_lo          = 0x2848,
++      .boardflags_hi          = 0x0000,
++};
++
++int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->bustype == SSB_BUSTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
++
++int __init bcm63xx_register_fallback_sprom(u8 *mac)
++{
++      int ret = 0;
++
++#ifdef CONFIG_SSB_PCIHOST
++      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
++
++      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
++#endif
++      return ret;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -0,0 +1,6 @@
++#ifndef __BCM63XX_FALLBACK_SPROM
++#define __BCM63XX_FALLBACK_SPROM
++
++int bcm63xx_register_fallback_sprom(u8 *mac);
++
++#endif
diff --git a/target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
new file mode 100644 (file)
index 0000000..d0e37ef
--- /dev/null
@@ -0,0 +1,95 @@
+From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:43:49 +0200
+Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
+
+Similar to ethernet setup, use a platform data struct for passing
+the mac. This eliminates the requirement to allocate an array on
+stack for the mac passed.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
+ arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
+ 4 files changed, 17 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
+-      u8 mac[ETH_ALEN];
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+@@ -184,8 +183,8 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+-      if (board_get_mac_address(mac) ||
+-          bcm63xx_register_fallback_sprom(mac))
++      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
++          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
+               pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
+ }
+ #endif
+-int __init bcm63xx_register_fallback_sprom(u8 *mac)
++int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
+ {
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
+-      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
++      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
++      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
+       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -1,6 +1,12 @@
+ #ifndef __BCM63XX_FALLBACK_SPROM
+ #define __BCM63XX_FALLBACK_SPROM
+-int bcm63xx_register_fallback_sprom(u8 *mac);
++#include <linux/if_ether.h>
++
++struct fallback_sprom_data {
++      u8 mac_addr[ETH_ALEN];
++};
++
++int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -7,6 +7,7 @@
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
++#include <bcm63xx_fallback_sprom.h>
+ /*
+  * flash mapping
+@@ -50,6 +51,9 @@ struct board_info {
+       /* External PHY reset GPIO flags from gpio.h */
+       unsigned long ephy_reset_gpio_flags;
++
++      /* fallback sprom config */
++      struct fallback_sprom_data fallback_sprom;
+ };
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/bcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
new file mode 100644 (file)
index 0000000..f540eab
--- /dev/null
@@ -0,0 +1,140 @@
+From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:52:56 +0200
+Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
+
+Some devices do not provide enough mac addresses to populate wifi in
+addition to ethernet.
+
+Use having pci enabled as a rough heuristic which boards should have it
+enabled.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
+ arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
+ 3 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -70,6 +70,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .has_usbd                       = 0,
++      .use_fallback_sprom             = 1,
+       .usbd = {
+               .use_fullspeed          = 0,
+@@ -219,6 +220,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -264,6 +266,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -316,6 +319,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -370,6 +374,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -420,6 +425,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -443,6 +449,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -461,6 +468,7 @@ static struct board_info __initdata boar
+       .has_uart0                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .has_ohci0                      = 1,
+       .has_enet0                      = 1,
+@@ -483,6 +491,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -509,6 +518,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -561,6 +571,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+@@ -632,6 +643,7 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
+       .enet0 = {
+               .has_phy                = 1,
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -183,8 +183,9 @@ int __init board_register_devices(void)
+        * do this after registering enet devices
+        */
+-      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
+-          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
++      if (board.use_fallback_sprom &&
++          (board_get_mac_address(board.fallback_sprom.mac_addr) ||
++           bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
+               pr_err(PFX "failed to register fallback SPROM\n");
+       bcm63xx_spi_register();
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -33,6 +33,7 @@ struct board_info {
+       unsigned int    has_usbd:1;
+       unsigned int    has_uart0:1;
+       unsigned int    has_uart1:1;
++      unsigned int    use_fallback_sprom:1;
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/bcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
new file mode 100644 (file)
index 0000000..0c4a9be
--- /dev/null
@@ -0,0 +1,66 @@
+From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 21:58:38 +0200
+Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
+
+Different chips require different sprom contents, so prepare for
+supplying the appropriate sprom type.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
+ 2 files changed, 17 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -22,7 +22,7 @@
+  * bcm4318 WLAN work
+  */
+ #ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
++static __initconst struct ssb_sprom bcm63xx_default_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+       .country_code           = 0x0,
+@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
+       .boardflags_hi          = 0x0000,
+ };
++static struct ssb_sprom bcm63xx_sprom;
++
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
++      switch (data->type) {
++      case SPROM_DEFAULT:
++              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
++                     sizeof(bcm63xx_sprom));
++              break;
++      default:
++              return -EINVAL;
++      }
++
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -3,8 +3,13 @@
+ #include <linux/if_ether.h>
++enum sprom_type {
++      SPROM_DEFAULT, /* default fallback sprom */
++};
++
+ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
++      enum sprom_type type;
+ };
+ int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/bcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
new file mode 100644 (file)
index 0000000..42502eb
--- /dev/null
@@ -0,0 +1,517 @@
+From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:16:36 +0200
+Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
+
+Allow using raw sprom content as templates.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 482 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
+               return -EINVAL;
+       }
+ }
++
++/* FIXME: use lib_sprom after submission upstream */
++
++/* Get the word-offset for a SSB_SPROM_XXX define. */
++#define SPOFF(offset) ((offset) / sizeof(u16))
++/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
++#define SPEX16(_outvar, _offset, _mask, _shift)       \
++      out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift)       \
++      out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++                         in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++      SPEX16(_outvar, _offset, _mask, _shift)
++
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift)   \
++      do {    \
++              SPEX(_field[0], _offset +  0, _mask, _shift);   \
++              SPEX(_field[1], _offset +  2, _mask, _shift);   \
++              SPEX(_field[2], _offset +  4, _mask, _shift);   \
++              SPEX(_field[3], _offset +  6, _mask, _shift);   \
++              SPEX(_field[4], _offset +  8, _mask, _shift);   \
++              SPEX(_field[5], _offset + 10, _mask, _shift);   \
++              SPEX(_field[6], _offset + 12, _mask, _shift);   \
++              SPEX(_field[7], _offset + 14, _mask, _shift);   \
++      } while (0)
++
++
++static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
++                             u16 mask, u16 shift)
++{
++      u16 v;
++      u8 gain;
++
++      v = in[SPOFF(SSB_SPROM1_AGAIN)];
++      gain = (v & mask) >> shift;
++      if (gain == 0xFF)
++              gain = 2; /* If unset use 2dBm */
++      if (sprom_revision == 1) {
++              /* Convert to Q5.2 */
++              gain <<= 2;
++      } else {
++              /* Q5.2 Fractional part is stored in 0xC0 */
++              gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
++      }
++
++      return (s8)gain;
++}
++
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++      SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++      SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++      SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++      SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++      SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++      SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++      SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++      SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++      SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++      SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++           SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
++static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
++{
++      u16 loc[3];
++
++      if (out->revision == 3)                 /* rev 3 moved MAC */
++              loc[0] = SSB_SPROM3_IL0MAC;
++      else {
++              loc[0] = SSB_SPROM1_IL0MAC;
++              loc[1] = SSB_SPROM1_ET0MAC;
++              loc[2] = SSB_SPROM1_ET1MAC;
++      }
++
++      SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
++      SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
++           SSB_SPROM1_ETHPHY_ET1A_SHIFT);
++      SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
++      SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
++      SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      if (out->revision == 1)
++              SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
++                   SSB_SPROM1_BINF_CCODE_SHIFT);
++      SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
++           SSB_SPROM1_BINF_ANTA_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
++           SSB_SPROM1_BINF_ANTBG_SHIFT);
++      SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
++      SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
++      SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
++      SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
++      SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
++      SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
++      SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
++      SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
++           SSB_SPROM1_GPIOA_P1_SHIFT);
++      SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
++      SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
++           SSB_SPROM1_GPIOB_P3_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
++           SSB_SPROM1_MAXPWR_A_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
++      SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
++           SSB_SPROM1_ITSSI_A_SHIFT);
++      SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
++      SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
++
++      SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
++      SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
++
++      /* Extract the antenna gain values. */
++      out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++                                                  SSB_SPROM1_AGAIN_BG,
++                                                  SSB_SPROM1_AGAIN_BG_SHIFT);
++      out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++                                                  SSB_SPROM1_AGAIN_A,
++                                                  SSB_SPROM1_AGAIN_A_SHIFT);
++      if (out->revision >= 2)
++              sprom_extract_r23(out, in);
++}
++
++/* Revs 4 5 and 8 have partially shared layout */
++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
++{
++      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
++      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
++           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
++      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
++      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
++           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
++
++      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
++      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
++           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
++      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
++      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
++           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
++
++      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
++      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
++           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
++      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
++      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
++           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
++
++      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
++      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
++           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
++      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
++      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
++           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
++}
++
++static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
++{
++      u16 il0mac_offset;
++
++      if (out->revision == 4)
++              il0mac_offset = SSB_SPROM4_IL0MAC;
++      else
++              il0mac_offset = SSB_SPROM5_IL0MAC;
++
++      SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
++      SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
++           SSB_SPROM4_ETHPHY_ET1A_SHIFT);
++      SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      if (out->revision == 4) {
++              SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
++              SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
++              SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
++              SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
++      } else {
++              SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
++              SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
++              SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
++              SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
++              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
++              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
++      }
++      SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
++           SSB_SPROM4_ANTAVAIL_A_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
++           SSB_SPROM4_ANTAVAIL_BG_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
++      SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
++           SSB_SPROM4_ITSSI_BG_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
++      SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
++           SSB_SPROM4_ITSSI_A_SHIFT);
++      if (out->revision == 4) {
++              SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
++              SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
++                   SSB_SPROM4_GPIOA_P1_SHIFT);
++              SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
++              SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
++                   SSB_SPROM4_GPIOB_P3_SHIFT);
++      } else {
++              SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
++              SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
++                   SSB_SPROM5_GPIOA_P1_SHIFT);
++              SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
++              SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
++                   SSB_SPROM5_GPIOB_P3_SHIFT);
++      }
++
++      /* Extract the antenna gain values. */
++      SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
++           SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
++      SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
++           SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
++      SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
++           SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
++      SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
++           SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
++
++      sprom_extract_r458(out, in);
++
++      /* TODO - get remaining rev 4 stuff needed */
++}
++
++static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
++{
++      int i;
++      u16 o;
++      u16 pwr_info_offset[] = {
++              SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++              SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++      };
++      BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++                      ARRAY_SIZE(out->core_pwr_info));
++
++      SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
++      SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++      SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
++      SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
++      SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++      SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++      SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
++      SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
++           SSB_SPROM8_ANTAVAIL_A_SHIFT);
++      SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
++           SSB_SPROM8_ANTAVAIL_BG_SHIFT);
++      SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
++      SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
++           SSB_SPROM8_ITSSI_BG_SHIFT);
++      SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
++      SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
++           SSB_SPROM8_ITSSI_A_SHIFT);
++      SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++      SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++           SSB_SPROM8_MAXP_AL_SHIFT);
++      SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
++      SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
++           SSB_SPROM8_GPIOA_P1_SHIFT);
++      SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
++      SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
++           SSB_SPROM8_GPIOB_P3_SHIFT);
++      SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++      SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++           SSB_SPROM8_TRI5G_SHIFT);
++      SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++      SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++           SSB_SPROM8_TRI5GH_SHIFT);
++      SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++      SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++           SSB_SPROM8_RXPO5G_SHIFT);
++      SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++      SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++           SSB_SPROM8_RSSISMC2G_SHIFT);
++      SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++           SSB_SPROM8_RSSISAV2G_SHIFT);
++      SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++           SSB_SPROM8_BXA2G_SHIFT);
++      SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++      SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++           SSB_SPROM8_RSSISMC5G_SHIFT);
++      SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++           SSB_SPROM8_RSSISAV5G_SHIFT);
++      SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++           SSB_SPROM8_BXA5G_SHIFT);
++      SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++      SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++      SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++      SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++      SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++      SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++      SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++      SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++      SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++      SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++      SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++      SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++      SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++      SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++      SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
++
++      /* Extract the antenna gain values. */
++      SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
++           SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
++      SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
++           SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
++      SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
++           SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
++      SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
++           SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
++
++      /* Extract cores power info info */
++      for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++              o = pwr_info_offset[i];
++              SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++                      SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++              SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++                      SSB_SPROM8_2G_MAXP, 0);
++
++              SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++              SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++                      SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++              SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++                      SSB_SPROM8_5G_MAXP, 0);
++              SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++                      SSB_SPROM8_5GH_MAXP, 0);
++              SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++                      SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++              SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++              SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++      }
++
++      /* Extract FEM info */
++      SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++      SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++      SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++      SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++      SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
++              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++      SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
++      SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
++      SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
++      SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
++      SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
++              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
++
++      SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++           SSB_SPROM8_LEDDC_ON_SHIFT);
++      SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++           SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++      SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++           SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++      SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++           SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++      SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++           SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++      SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++      SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++      SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++      SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++           SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++      SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++           SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++      SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++      SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++           SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++      SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++           SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++           SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++      SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++      SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++      SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++           SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++      SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++      SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++      SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++      SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++      SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++           SSB_SPROM8_THERMAL_TRESH_SHIFT);
++      SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++           SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++      SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++           SSB_SPROM8_TEMPDELTA_PHYCAL,
++           SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++      SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++           SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++      SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++           SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++           SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
++      sprom_extract_r458(out, in);
++
++      /* TODO - get remaining rev 8 stuff needed */
++}
++
++static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
++{
++      memset(out, 0, sizeof(*out));
++
++      out->revision = in[size - 1] & 0x00FF;
++      memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
++      memset(out->et1mac, 0xFF, 6);
++
++      switch (out->revision) {
++      case 1:
++      case 2:
++      case 3:
++              sprom_extract_r123(out, in);
++              break;
++      case 4:
++      case 5:
++              sprom_extract_r45(out, in);
++              break;
++      case 8:
++              sprom_extract_r8(out, in);
++              break;
++      default:
++              pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++                       out->revision);
++              out->revision = 1;
++              sprom_extract_r123(out, in);
++      }
++
++      if (out->boardflags_lo == 0xFFFF)
++              out->boardflags_lo = 0;  /* per specs */
++      if (out->boardflags_hi == 0xFFFF)
++              out->boardflags_hi = 0;  /* per specs */
++
++      return 0;
++}
++
++static __initdata u16 template_sprom[220];
+ #endif
++
+ int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
+ {
+       int ret = 0;
+ #ifdef CONFIG_SSB_PCIHOST
++      u16 size = 0;
++
+       switch (data->type) {
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
+               return -EINVAL;
+       }
++      if (size > 0)
++              sprom_extract(&bcm63xx_sprom, template_sprom, size);
++
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/bcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/bcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
new file mode 100644 (file)
index 0000000..65c00b5
--- /dev/null
@@ -0,0 +1,181 @@
+From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:33:38 +0200
+Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
+ ssb cards
+
+Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
+ 2 files changed, 142 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
+       .boardflags_hi          = 0x0000,
+ };
++
++static __initconst u16 bcm4306_sprom[] = {
++      0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
++      0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
++      0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
++};
++
++static __initconst u16 bcm4318_sprom[] = {
++      0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
++      0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
++      0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
++};
++
++static __initconst u16 bcm4321_sprom[] = {
++      0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
++      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
++      0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0004,
++};
++
++static __initconst u16 bcm4322_sprom[] = {
++      0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
++      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43222_sprom[] = {
++      0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
++      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
+ static struct ssb_sprom bcm63xx_sprom;
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
+       u16 size = 0;
+       switch (data->type) {
++      case SPROM_BCM4306:
++              memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
++              size = ARRAY_SIZE(bcm4306_sprom);
++              break;
++      case SPROM_BCM4318:
++              memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
++              size = ARRAY_SIZE(bcm4318_sprom);
++              break;
++      case SPROM_BCM4321:
++              memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
++              size = ARRAY_SIZE(bcm4321_sprom);
++              break;
++      case SPROM_BCM4322:
++              memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
++              size = ARRAY_SIZE(bcm4322_sprom);
++              break;
++      case SPROM_BCM43222:
++              memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
++              size = ARRAY_SIZE(bcm43222_sprom);
++              break;
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -5,6 +5,12 @@
+ enum sprom_type {
+       SPROM_DEFAULT, /* default fallback sprom */
++      /* SSB based */
++      SPROM_BCM4306,
++      SPROM_BCM4318,
++      SPROM_BCM4321,
++      SPROM_BCM4322,
++      SPROM_BCM43222,
+ };
+ struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/bcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
new file mode 100644 (file)
index 0000000..11153c1
--- /dev/null
@@ -0,0 +1,128 @@
+From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 29 Jul 2014 22:48:26 +0200
+Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
+
+Similar to SSB, register a fallback sprom handler for BCMA.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig |  1 +
+ arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
+ 2 files changed, 36 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -5,6 +5,7 @@ menu "Board support"
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
++      select BCMA
+       default y
+ endmenu
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -12,6 +12,7 @@
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/bcma/bcma.h>
+ #include <bcm63xx_fallback_sprom.h>
+ #include <board_bcm963xx.h>
+@@ -21,7 +22,7 @@
+  * Register a sane SPROMv2 to make the on-board
+  * bcm4318 WLAN work
+  */
+-#ifdef CONFIG_SSB_PCIHOST
++#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
+ static __initconst struct ssb_sprom bcm63xx_default_sprom = {
+       .revision               = 0x02,
+       .board_rev              = 0x17,
+@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
+       .boardflags_hi          = 0x0000,
+ };
+-
++#if defined (CONFIG_SSB_PCIHOST)
+ static __initconst u16 bcm4306_sprom[] = {
+       0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
+       0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
+@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
+       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+       0xffff, 0xffff, 0xffff, 0x0008,
+ };
++#endif /* CONFIG_SSB_PCIHOST */
+ static struct ssb_sprom bcm63xx_sprom;
+-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
++#if defined(CONFIG_SSB_PCIHOST)
++int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
+               return -EINVAL;
+       }
+ }
++#endif
++
++#if defined(CONFIG_BCMA_HOST_PCI)
++int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
++{
++      if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
++              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              return 0;
++      } else {
++              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
++              return -EINVAL;
++      }
++}
++#endif
+ /* FIXME: use lib_sprom after submission upstream */
+@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
+ {
+       int ret = 0;
+-#ifdef CONFIG_SSB_PCIHOST
++#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
+       u16 size = 0;
+       switch (data->type) {
++#if defined(CONFIG_SSB_PCIHOST)
+       case SPROM_BCM4306:
+               memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
+               size = ARRAY_SIZE(bcm4306_sprom);
+@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
+               memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
+               size = ARRAY_SIZE(bcm43222_sprom);
+               break;
++#endif
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
++#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
++
++#if defined(CONFIG_SSB_PCIHOST)
++      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
++      if (ret)
++              return ret;
++
++#endif
+-      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
++#if defined(CONFIG_BCMA_HOST_PCI)
++      ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
++      if (ret)
++              return ret;
+ #endif
+       return ret;
+ }
diff --git a/target/linux/bcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/bcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
new file mode 100644 (file)
index 0000000..5c0abb9
--- /dev/null
@@ -0,0 +1,303 @@
+From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 30 Jul 2014 23:14:27 +0200
+Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
+
+Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
+BCM43228, and BCM4331.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
+ 2 files changed, 264 insertions(+)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
+ };
+ #endif /* CONFIG_SSB_PCIHOST */
++#if defined(CONFIG_BCMA_HOST_PCI)
++static __initconst u16 bcm4313_sprom[] = {
++      0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
++      0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
++      0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0008,
++};
++
++static __initconst u16 bcm43131_sprom[] = {
++      0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
++      0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43217_sprom[] = {
++      0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x7a08,
++};
++
++static __initconst u16 bcm43225_sprom[] = {
++      0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
++      0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43227_sprom[] = {
++      0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
++      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
++      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0008,
++};
++
++static __initconst u16 bcm43228_sprom[] = {
++      0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
++      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
++      0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
++      0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
++      0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
++      0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
++      0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
++      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xf008,
++};
++
++static __initconst u16 bcm4331_sprom[] = {
++      0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
++      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
++      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
++      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
++      0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
++      0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
++      0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
++      0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
++      0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
++      0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
++      0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
++      0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
++      0xffff, 0xffff, 0xffff, 0x0009,
++};
++
++#endif  /* CONFIG_BCMA_HOST_PCI */
++
+ static struct ssb_sprom bcm63xx_sprom;
+ #if defined(CONFIG_SSB_PCIHOST)
+@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
+               size = ARRAY_SIZE(bcm43222_sprom);
+               break;
+ #endif
++#if defined(CONFIG_BCMA_HOST_PCI)
++      case SPROM_BCM4313:
++              memcpy(&template_sprom, &bcm4313_sprom,
++                       sizeof(bcm4313_sprom));
++              size = ARRAY_SIZE(bcm4313_sprom);
++              break;
++      case SPROM_BCM43131:
++              memcpy(&template_sprom, &bcm43131_sprom,
++                     sizeof(bcm43131_sprom));
++              size = ARRAY_SIZE(bcm43131_sprom);
++              break;
++      case SPROM_BCM43217:
++              memcpy(&template_sprom, &bcm43217_sprom,
++                     sizeof(bcm43217_sprom));
++              size = ARRAY_SIZE(bcm43217_sprom);
++              break;
++      case SPROM_BCM43225:
++              memcpy(&template_sprom, &bcm43225_sprom,
++                     sizeof(bcm43225_sprom));
++              size = ARRAY_SIZE(bcm43225_sprom);
++              break;
++      case SPROM_BCM43227:
++              memcpy(&template_sprom, &bcm43227_sprom,
++                     sizeof(bcm43227_sprom));
++              size = ARRAY_SIZE(bcm43227_sprom);
++              break;
++      case SPROM_BCM43228:
++              memcpy(&template_sprom, &bcm43228_sprom,
++                     sizeof(bcm43228_sprom));
++              size = ARRAY_SIZE(bcm43228_sprom);
++              break;
++      case SPROM_BCM4331:
++              memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
++              size = ARRAY_SIZE(bcm4331_sprom);
++              break;
++#endif
+       case SPROM_DEFAULT:
+               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+                      sizeof(bcm63xx_sprom));
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -11,6 +11,14 @@ enum sprom_type {
+       SPROM_BCM4321,
+       SPROM_BCM4322,
+       SPROM_BCM43222,
++      /* BCMA based */
++      SPROM_BCM4313,
++      SPROM_BCM43131,
++      SPROM_BCM43217,
++      SPROM_BCM43225,
++      SPROM_BCM43227,
++      SPROM_BCM43228,
++      SPROM_BCM4331,
+ };
+ struct fallback_sprom_data {
diff --git a/target/linux/bcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/bcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
new file mode 100644 (file)
index 0000000..74c2846
--- /dev/null
@@ -0,0 +1,67 @@
+From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 31 Jul 2014 19:12:33 +0200
+Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
+ fixups
+
+Allow board_info files to supply fixups for the base sproms to adapt
+them to the actual used sprom contents in case they do not use the
+default ones.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
+ .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
+ 2 files changed, 21 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
+       return 0;
+ }
++void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
++{
++      unsigned int i;
++
++      for (i = 0; i < n; i++)
++              sprom[fixups[i].offset] = fixups[i].value;
++}
++
+ static __initdata u16 template_sprom[220];
+ #endif
+@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
+               return -EINVAL;
+       }
+-      if (size > 0)
++      if (size > 0) {
++              sprom_apply_fixups(template_sprom, data->board_fixups,
++                                 data->num_board_fixups);
++
+               sprom_extract(&bcm63xx_sprom, template_sprom, size);
++      }
+       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -21,9 +21,17 @@ enum sprom_type {
+       SPROM_BCM4331,
+ };
++struct sprom_fixup {
++      u16 offset;
++      u16 value;
++};
++
+ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
+       enum sprom_type type;
++
++      struct sprom_fixup *board_fixups;
++      unsigned int num_board_fixups;
+ };
+ int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/bcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/bcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
new file mode 100644 (file)
index 0000000..40591e5
--- /dev/null
@@ -0,0 +1,102 @@
+From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 31 Jul 2014 20:39:44 +0200
+Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
+ fallback sprom
+
+Warn if the set pci bus/slot does not match the actual request.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
+ .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
+ 2 files changed, 29 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
+ #endif  /* CONFIG_BCMA_HOST_PCI */
+-static struct ssb_sprom bcm63xx_sprom;
++struct fallback_sprom_match {
++      u8 pci_bus;
++      u8 pci_dev;
++      struct ssb_sprom sprom;
++};
++
++static struct fallback_sprom_match fallback_sprom;
+ #if defined(CONFIG_SSB_PCIHOST)
+ int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->bustype == SSB_BUSTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
++                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
++                      pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                              bus->host_pci->bus->number,
++                              PCI_SLOT(bus->host_pci->devfn));
++              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
+               return 0;
+       } else {
+               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
+ int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
+ {
+       if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
+-              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
++              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
++                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
++                      pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                              bus->host_pci->bus->number,
++                              PCI_SLOT(bus->host_pci->devfn));
++              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
+               return 0;
+       } else {
+               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
+               break;
+ #endif
+       case SPROM_DEFAULT:
+-              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
+-                     sizeof(bcm63xx_sprom));
++              memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
++                     sizeof(bcm63xx_default_sprom));
+               break;
+       default:
+               return -EINVAL;
+@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
+               sprom_apply_fixups(template_sprom, data->board_fixups,
+                                  data->num_board_fixups);
+-              sprom_extract(&bcm63xx_sprom, template_sprom, size);
++              sprom_extract(&fallback_sprom.sprom, template_sprom, size);
+       }
+-      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
+-      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
++      memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
++
++      fallback_sprom.pci_bus = data->pci_bus;
++      fallback_sprom.pci_dev = data->pci_dev;
+ #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
+ #if defined(CONFIG_SSB_PCIHOST)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
+@@ -30,6 +30,9 @@ struct fallback_sprom_data {
+       u8 mac_addr[ETH_ALEN];
+       enum sprom_type type;
++      u8 pci_bus;
++      u8 pci_dev;
++
+       struct sprom_fixup *board_fixups;
+       unsigned int num_board_fixups;
+ };
diff --git a/target/linux/bcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/bcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
new file mode 100644 (file)
index 0000000..a491816
--- /dev/null
@@ -0,0 +1,118 @@
+From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 24 Jun 2014 10:57:51 +0200
+Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
+ arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/prom.c                |    6 ++++++
+ 3 files changed, 44 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -2,6 +2,10 @@
+ menu "Board support"
+       depends on BCM63XX
++config BOARD_BCM63XX_DT
++      bool "Device Tree boards (experimential)"
++      select USE_OF
++
+ config BOARD_BCM963XX
+        bool "Generic Broadcom 963xx boards"
+       select SSB
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -10,11 +10,14 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
++#include <linux/of_fdt.h>
++#include <linux/of_platform.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+ #include <asm/fw/cfe/cfe_api.h>
++#include <asm/prom.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_uart.h>
+@@ -125,8 +128,23 @@ void __init board_setup(void)
+       /* make sure we're running on expected cpu */
+       if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+               panic("unexpected CPU for bcm963xx board");
++
++#if CONFIG_OF
++      if (initial_boot_params)
++              __dt_setup_arch(initial_boot_params);
++#endif
+ }
++#if CONFIG_OF
++void __init device_tree_init(void)
++{
++      if (!initial_boot_params)
++              return;
++
++      unflatten_and_copy_device_tree();
++}
++#endif
++
+ static struct gpio_led_platform_data bcm63xx_led_data;
+ static struct platform_device bcm63xx_gpio_leds = {
+@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
+       .dev.platform_data      = &bcm63xx_led_data,
+ };
++#if CONFIG_OF
++static struct of_device_id of_ids[] = {
++      { /* filled at runtime */ },
++      { .compatible = "simple-bus" },
++      { },
++};
++#endif
+ /*
+  * third stage init callback, register all board devices.
+  */
+@@ -142,6 +167,15 @@ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++#if CONFIG_OF
++      if (of_have_populated_dt()) {
++              snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
++                       "brcm,bcm%x", bcm63xx_get_cpu_id());
++
++              of_platform_populate(NULL, of_ids, NULL, NULL);
++      }
++#endif
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -8,6 +8,7 @@
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
++#include <linux/of_fdt.h>
+ #include <linux/smp.h>
+ #include <asm/bootinfo.h>
+ #include <asm/bmips.h>
+@@ -23,6 +24,11 @@ void __init prom_init(void)
+ {
+       u32 reg, mask;
++#if CONFIG_OF
++      if (fw_passed_dtb)
++              early_init_dt_verify((void *)fw_passed_dtb);
++#endif
++
+       bcm63xx_cpu_init();
+       /* stop any running watchdog */
diff --git a/target/linux/bcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/bcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
new file mode 100644 (file)
index 0000000..7069c23
--- /dev/null
@@ -0,0 +1,95 @@
+From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 26 Jun 2014 12:51:00 +0200
+Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
+ by dtb
+
+Allow using the passed dtb's compatible property to match board_info
+structs instead of nvram's boardname field, which is not unique anyway.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
+ arch/mips/bcm63xx/boards/board_common.h   |    3 +++
+ 3 files changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -695,6 +695,10 @@ static const struct board_info __initcon
+ #endif
+ };
++static struct of_device_id const bcm963xx_boards_dt[] = {
++      { },
++};
++
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void)
+       char *board_name = NULL;
+       u32 val;
+       struct bcm_hcs *hcs;
++      const struct of_device_id *board_match;
+       /* read base address of boot chip select (0)
+        * 6328/6362 do not have MPI but boot from a fixed address
+@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void)
+       } else {
+               board_name = bcm63xx_nvram_get_name();
+       }
++
++      /* find board by compat */
++      board_match = bcm63xx_match_board(bcm963xx_boards_dt);
++      if (board_match) {
++              board_early_setup(board_match->data,
++                                bcm63xx_nvram_get_mac_address);
++
++              return;
++      }
++
+       /* find board by name */
+       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -239,3 +239,21 @@ int __init board_register_devices(void)
+       return 0;
+ }
++
++const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
++{
++      const struct of_device_id *match;
++      unsigned long dt_root;
++
++      if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
++              return NULL;
++
++      dt_root = of_get_flat_dt_root();
++
++      for (match = m; match->compatible[0]; match++) {
++              if (of_flat_dt_is_compatible(dt_root, match->compatible))
++                      return match;
++      }
++
++      return NULL;
++}
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -1,11 +1,14 @@
+ #ifndef __BOARD_COMMON_H
+ #define __BOARD_COMMON_H
++#include <linux/of.h>
+ #include <board_bcm963xx.h>
+ void board_early_setup(const struct board_info *board,
+                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
++const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
++
+ #if defined(CONFIG_BOARD_BCM963XX)
+ void board_bcm963xx_init(void);
+ #else
diff --git a/target/linux/bcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
new file mode 100644 (file)
index 0000000..5dd4cba
--- /dev/null
@@ -0,0 +1,65 @@
+From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 21 Nov 2014 16:54:06 +0100
+Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
+ list
+
+Populate the compatible to board_info list to allow dtbs to be used
+for known boards.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -696,6 +696,48 @@ static const struct board_info __initcon
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
++#ifdef CONFIG_OF
++#ifdef CONFIG_BCM63XX_CPU_3368
++      { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6338
++      { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
++      { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6345
++      { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6348
++      { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
++      { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
++      { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
++      { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
++      { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
++      { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
++      { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
++      { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
++      { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6358
++      { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
++      { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
++      { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
++      { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
++      { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
++      { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
++#endif
++#ifdef CONFIG_BCM63XX_CPU_6368
++#endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++#endif
++#endif /* CONFIG_OF */
+       { },
+ };
diff --git a/target/linux/bcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch b/target/linux/bcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch
new file mode 100644 (file)
index 0000000..026eff3
--- /dev/null
@@ -0,0 +1,37 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -143,6 +143,18 @@ void __init device_tree_init(void)
+       unflatten_and_copy_device_tree();
+ }
++
++int board_of_device_present(const char *alias)
++{
++      bool present;
++      struct device_node *np;
++
++      np = of_find_node_by_path(alias);
++      present = of_device_is_available(np);
++      of_node_put(np);
++
++      return present;
++}
+ #endif
+ static struct gpio_led_platform_data bcm63xx_led_data;
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
+ static inline void board_bcm963xx_init(void) { }
+ #endif
++#if defined(CONFIG_OF)
++int board_of_device_present(const char *alias);
++#else
++static inline void board_of_device_present(const char *alias)
++{
++      return 0;
++}
++#endif
++
+ #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/bcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/bcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch
new file mode 100644 (file)
index 0000000..25384eb
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -23,6 +23,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
++#include "boards/board_common.h"
++
+ static int flash_type;
+ static struct mtd_partition mtd_partitions[] = {
+@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void)
+       switch (flash_type) {
+       case BCM63XX_FLASH_TYPE_PARALLEL:
++              /* don't register when already registered through from dtb */
++              if (board_of_device_present("pflash"))
++                      return 0;
+               if (!mtd_resources[0].start) {
+                       /* read base address of boot chip select (0) */
diff --git a/target/linux/bcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/bcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
new file mode 100644 (file)
index 0000000..c5041a9
--- /dev/null
@@ -0,0 +1,45 @@
+From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 1 Dec 2014 00:20:07 +0100
+Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c |   12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -14,6 +14,8 @@
+ #include <linux/irqchip.h>
+ #include <linux/irqchip/irq-bcm6345-ext.h>
+ #include <linux/irqchip/irq-bcm6345-periph.h>
++#include <linux/of.h>
++#include <linux/of_fdt.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -21,6 +23,9 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
++IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
++           mips_cpu_irq_of_init);
++
+ void __init arch_init_irq(void)
+ {
+       void __iomem *periph_bases[2];
+@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
+       int periph_irqs[2] = { 2, 3 };
+       int ext_irqs[6];
++#ifdef CONFIG_OF
++      if (initial_boot_params) {
++              irqchip_init();
++              return;
++      }
++#endif
++
+       periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
+       ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/bcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/bcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
new file mode 100644 (file)
index 0000000..6307d56
--- /dev/null
@@ -0,0 +1,178 @@
+From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 19:55:32 +0100
+Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/gpio/Kconfig        |    8 +++
+ drivers/gpio/Makefile       |    1 +
+ drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 131 insertions(+)
+ create mode 100644 drivers/gpio/gpio-bcm63xx.c
+
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -151,6 +151,13 @@ config GPIO_BCM_KONA
+       help
+         Turn on GPIO support for Broadcom "Kona" chips.
++config GPIO_BCM63XX
++      bool "Broadcom BCM63XX GPIO"
++      depends on MIPS || COMPILE_TEST
++      select GPIO_GENERIC
++      help
++        Turn on GPIO support for Broadcom BCM63XX xDSL chips.
++
+ config GPIO_BRCMSTB
+       tristate "BRCMSTB GPIO support"
+       default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79)     += gpio-ath79.o
+ obj-$(CONFIG_GPIO_ASPEED)     += gpio-aspeed.o
+ obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)    += gpio-raspberrypi-exp.o
+ obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
++obj-$(CONFIG_GPIO_BCM63XX)    += gpio-bcm63xx.o
+ obj-$(CONFIG_GPIO_BD9571MWV)  += gpio-bd9571mwv.o
+ obj-$(CONFIG_GPIO_BRCMSTB)    += gpio-brcmstb.o
+ obj-$(CONFIG_GPIO_BT8XX)      += gpio-bt8xx.o
+--- /dev/null
++++ b/drivers/gpio/gpio-bcm63xx.c
+@@ -0,0 +1,135 @@
++/*
++ * Driver for BCM63XX memory-mapped GPIO controllers, based on
++ * Generic driver for memory-mapped GPIO controllers.
++ *
++ * Copyright 2008 MontaVista Software, Inc.
++ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
++ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/compiler.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/log2.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_gpio.h>
++
++static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++      char irq_name[7]; /* "gpioXX" */
++
++      sprintf(irq_name, "gpio%d", gpio);
++      return of_irq_get_byname(chip->of_node, irq_name);
++}
++
++static int bcm63xx_gpio_probe(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct resource *dat_r, *dirout_r;
++      void __iomem *dat;
++      void __iomem *dirout;
++      unsigned long sz;
++      int err;
++      struct gpio_chip *gc;
++      struct bgpio_pdata *pdata = dev_get_platdata(dev);
++
++      dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++      if (!dat_r || !dirout_r)
++              return -EINVAL;
++
++      if (resource_size(dat_r) != resource_size(dirout_r))
++              return -EINVAL;
++
++      sz = resource_size(dat_r);
++
++      dat = devm_ioremap_resource(dev, dat_r);
++      if (IS_ERR(dat))
++              return PTR_ERR(dat);
++
++      dirout = devm_ioremap_resource(dev, dirout_r);
++      if (IS_ERR(dirout))
++              return PTR_ERR(dirout);
++
++      gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
++      if (!gc)
++              return -ENOMEM;
++
++      err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
++                       BGPIOF_BIG_ENDIAN_BYTE_ORDER);
++      if (err)
++              return err;
++
++      platform_set_drvdata(pdev, gc);
++
++      if (dev->of_node) {
++              int id = of_alias_get_id(dev->of_node, "gpio");
++              u32 ngpios;
++
++              if (id >= 0)
++                      gc->label = devm_kasprintf(dev, GFP_KERNEL,
++                                                 "bcm63xx-gpio.%d", id);
++
++              if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
++                      gc->ngpio = ngpios;
++
++              if (of_get_property(dev->of_node, "interrupt-names", NULL))
++                      gc->to_irq = bcm63xx_gpio_to_irq;
++
++      } else if (pdata) {
++              gc->base = pdata->base;
++              if (pdata->ngpio > 0)
++                      gc->ngpio = pdata->ngpio;
++      }
++
++      return gpiochip_add(gc);
++}
++
++static int bcm63xx_gpio_remove(struct platform_device *pdev)
++{
++      struct gpio_chip *gc = platform_get_drvdata(pdev);
++
++      gpiochip_remove(gc);
++      return 0;
++}
++
++#ifdef CONFIG_OF
++static struct of_device_id bcm63xx_gpio_of_match[] = {
++      { .compatible = "brcm,bcm6345-gpio" },
++      { },
++};
++#endif
++
++static struct platform_driver bcm63xx_gpio_driver = {
++      .probe = bcm63xx_gpio_probe,
++      .remove = bcm63xx_gpio_remove,
++      .driver = {
++              .name = "bcm63xx-gpio",
++              .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
++      },
++};
++
++module_platform_driver(bcm63xx_gpio_driver);
++
++MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
++MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/bcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
new file mode 100644 (file)
index 0000000..fe56da0
--- /dev/null
@@ -0,0 +1,215 @@
+From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 20 Feb 2015 23:58:54 +0100
+Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_common.c |    2 +
+ arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
+ arch/mips/bcm63xx/setup.c |   3 -
+ 3 files changed, 32 insertions(+), 118 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -188,6 +188,8 @@ int __init board_register_devices(void)
+       }
+ #endif
++      bcm63xx_gpio_init();
++
+       if (board.has_uart0)
+               bcm63xx_uart_register(0);
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -5,147 +5,62 @@
+  *
+  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
++ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+  */
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+-#include <linux/spinlock.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio/driver.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+-#include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+-static u32 gpio_out_low_reg;
+-
+-static void bcm63xx_gpio_out_low_reg_init(void)
++static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+-      switch (bcm63xx_get_cpu_id()) {
+-      case BCM6345_CPU_ID:
+-              gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
+-              break;
+-      default:
+-              gpio_out_low_reg = GPIO_DATA_LO_REG;
+-              break;
+-      }
+-}
+-
+-static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+-static u32 gpio_out_low, gpio_out_high;
++      struct resource res[2];
++      struct bgpio_pdata pdata;
+-static void bcm63xx_gpio_set(struct gpio_chip *chip,
+-                           unsigned gpio, int val)
+-{
+-      u32 reg;
+-      u32 mask;
+-      u32 *v;
+-      unsigned long flags;
+-
+-      if (gpio >= chip->ngpio)
+-              BUG();
+-
+-      if (gpio < 32) {
+-              reg = gpio_out_low_reg;
+-              mask = 1 << gpio;
+-              v = &gpio_out_low;
+-      } else {
+-              reg = GPIO_DATA_HI_REG;
+-              mask = 1 << (gpio - 32);
+-              v = &gpio_out_high;
+-      }
+-
+-      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+-      if (val)
+-              *v |= mask;
+-      else
+-              *v &= ~mask;
+-      bcm_gpio_writel(*v, reg);
+-      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+-}
++      memset(res, 0, sizeof(res));
++      memset(&pdata, 0, sizeof(pdata));
+-static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+-{
+-      u32 reg;
+-      u32 mask;
++      res[0].flags = IORESOURCE_MEM;
++      res[0].start = bcm63xx_regset_address(RSET_GPIO);
++      res[0].start += dir;
+-      if (gpio >= chip->ngpio)
+-              BUG();
++      res[0].end = res[0].start + 3;
+-      if (gpio < 32) {
+-              reg = gpio_out_low_reg;
+-              mask = 1 << gpio;
+-      } else {
+-              reg = GPIO_DATA_HI_REG;
+-              mask = 1 << (gpio - 32);
+-      }
++      res[1].flags = IORESOURCE_MEM;
++      res[1].start = bcm63xx_regset_address(RSET_GPIO);
++      res[1].start += data;
+-      return !!(bcm_gpio_readl(reg) & mask);
+-}
++      res[1].end = res[1].start + 3;
+-static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+-                                    unsigned gpio, int dir)
+-{
+-      u32 reg;
+-      u32 mask;
+-      u32 tmp;
+-      unsigned long flags;
+-
+-      if (gpio >= chip->ngpio)
+-              BUG();
+-
+-      if (gpio < 32) {
+-              reg = GPIO_CTL_LO_REG;
+-              mask = 1 << gpio;
+-      } else {
+-              reg = GPIO_CTL_HI_REG;
+-              mask = 1 << (gpio - 32);
+-      }
+-
+-      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+-      tmp = bcm_gpio_readl(reg);
+-      if (dir == BCM63XX_GPIO_DIR_IN)
+-              tmp &= ~mask;
+-      else
+-              tmp |= mask;
+-      bcm_gpio_writel(tmp, reg);
+-      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
++      pdata.base = id * 32;
++      pdata.ngpio = ngpio;
+-      return 0;
++      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
++                                        &pdata, sizeof(pdata));
+ }
+-static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
++int __init bcm63xx_gpio_init(void)
+ {
+-      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
+-}
++      int ngpio = bcm63xx_gpio_count();
++      int data_low_reg;
+-static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+-                                       unsigned gpio, int value)
+-{
+-      bcm63xx_gpio_set(chip, gpio, value);
+-      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
+-}
++      if (BCMCPU_IS_6345())
++              data_low_reg = GPIO_DATA_LO_REG_6345;
++      else
++              data_low_reg = GPIO_DATA_LO_REG;
++      bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
+-static struct gpio_chip bcm63xx_gpio_chip = {
+-      .label                  = "bcm63xx-gpio",
+-      .direction_input        = bcm63xx_gpio_direction_input,
+-      .direction_output       = bcm63xx_gpio_direction_output,
+-      .get                    = bcm63xx_gpio_get,
+-      .set                    = bcm63xx_gpio_set,
+-      .base                   = 0,
+-};
++      if (ngpio <= 32)
++              return 0;
+-int __init bcm63xx_gpio_init(void)
+-{
+-      bcm63xx_gpio_out_low_reg_init();
++      bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
+-      gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
+-      if (!BCMCPU_IS_6345())
+-              gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+-      bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+-      pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
++      return 0;
+-      return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
+ }
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
+ int __init bcm63xx_register_devices(void)
+ {
+-      /* register gpiochip */
+-      bcm63xx_gpio_init();
+-
+       return board_register_devices();
+ }
diff --git a/target/linux/bcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/bcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
new file mode 100644 (file)
index 0000000..c061ec4
--- /dev/null
@@ -0,0 +1,129 @@
+From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:21:59 +0100
+Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
+
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
+ arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
+ arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
+ 5 files changed, 42 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -55,7 +55,7 @@ static struct board_info __initdata boar
+       },
+       .ephy_reset_gpio                = 36,
+-      .ephy_reset_gpio_flags          = GPIOF_INIT_HIGH,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+ #endif
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -247,9 +247,10 @@ int __init board_register_devices(void)
+       platform_device_register(&bcm63xx_gpio_leds);
+-      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+-              gpio_request_one(board.ephy_reset_gpio,
+-                              board.ephy_reset_gpio_flags, "ephy-reset");
++      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
++              bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
++                                      board.ephy_reset_gpio_flags);
++      }
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -8,15 +8,23 @@
+  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
+  */
++#include <asm/addrspace.h>
++
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio/driver.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
++static const char * const gpio_chip_labels[] = {
++      "bcm63xx-gpio.0",
++      "bcm63xx-gpio.1",
++};
++
+ static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
+ {
+       struct resource res[2];
+@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
+       return 0;
+ }
++
++static struct gpiod_lookup_table ephy_reset = {
++      .dev_id = "bcm63xx_enet-0",
++      .table = {
++              { /* filled at runtime */ },
++              { },
++      },
++};
++
++
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
++{
++      if (ephy_reset.table[0].chip_label)
++              return;
++
++      ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
++      ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
++      ephy_reset.table[0].con_id = "reset";
++      ephy_reset.table[0].flags = flags;
++
++      gpiod_add_lookup_table(&ephy_reset);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -3,9 +3,11 @@
+ #define BCM63XX_GPIO_H
+ #include <linux/init.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cpu.h>
+ int __init bcm63xx_gpio_init(void);
++void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/gpio.h>
++#include <linux/gpio/machine.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -50,8 +51,8 @@ struct board_info {
+       /* External PHY reset GPIO */
+       unsigned int ephy_reset_gpio;
+-      /* External PHY reset GPIO flags from gpio.h */
+-      unsigned long ephy_reset_gpio_flags;
++      /* External PHY reset GPIO flags from gpio/machine.h */
++      enum gpio_lookup_flags ephy_reset_gpio_flags;
+       /* fallback sprom config */
+       struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/bcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/bcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
new file mode 100644 (file)
index 0000000..6eb1bd0
--- /dev/null
@@ -0,0 +1,35 @@
+From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 21 Feb 2015 17:26:50 +0100
+Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
+present in dtb
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/gpio.c |   7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -20,6 +20,8 @@
+ #include <bcm63xx_gpio.h>
+ #include <bcm63xx_regs.h>
++#include "boards/board_common.h"
++
+ static const char * const gpio_chip_labels[] = {
+       "bcm63xx-gpio.0",
+       "bcm63xx-gpio.1",
+@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
+       pdata.base = id * 32;
+       pdata.ngpio = ngpio;
+-      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
+-                                        &pdata, sizeof(pdata));
++      if (!board_of_device_present("gpio0") &&
++          !board_of_device_present("pinctrl"))
++              platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
++                                                2, &pdata, sizeof(pdata));
+ }
+ int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/bcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/bcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
new file mode 100644 (file)
index 0000000..b571999
--- /dev/null
@@ -0,0 +1,59 @@
+From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 25 Mar 2015 13:52:02 +0100
+Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
+ ready gpio
+
+To prepare for a time when gpiobases don't need to be fixed anymore.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-pcmcia.c
++++ b/arch/mips/bcm63xx/dev-pcmcia.c
+@@ -10,6 +10,7 @@
+ #include <linux/kernel.h>
+ #include <asm/bootinfo.h>
+ #include <linux/platform_device.h>
++#include <linux/gpio/machine.h>
+ #include <bcm63xx_cs.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_pcmcia.h>
+@@ -101,6 +102,14 @@ static const struct {
+       },
+ };
++static struct gpiod_lookup_table pcmcia_gpios_table = {
++      .dev_id = "bcm63xx_pcmcia.0",
++      .table = {
++              GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
++              { },
++      },
++};
++
+ int __init bcm63xx_pcmcia_register(void)
+ {
+       int ret, i;
+@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6348_CPU_ID:
+               pd.ready_gpio = 22;
++              pcmcia_gpios_table.table[0].chip_hwnum = 22;
+               break;
+       case BCM6358_CPU_ID:
+               pd.ready_gpio = 18;
++              pcmcia_gpios_table.table[0].chip_hwnum = 18;
+               break;
+       default:
+               return -ENODEV;
+       }
++      gpiod_add_lookup_table(&pcmcia_gpios_table);
++
+       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+       pcmcia_resources[0].end = pcmcia_resources[0].start +
+               RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/bcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/bcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
new file mode 100644 (file)
index 0000000..2534171
--- /dev/null
@@ -0,0 +1,59 @@
+From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Wed, 25 Mar 2015 13:54:56 +0100
+Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
+
+Use the new named gpio instead of relying on the hardware gpio numbers
+matching the virtual gpio numbers.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
+ drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+--- a/drivers/pcmcia/bcm63xx_pcmcia.c
++++ b/drivers/pcmcia/bcm63xx_pcmcia.c
+@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
+               stat |= SS_XVCARD;
+       stat |= SS_POWERON;
+-      if (gpio_get_value(skt->pd->ready_gpio))
++      if (gpiod_get_value(skt->ready_gpio))
+               stat |= SS_READY;
+       return stat;
+@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
+               goto err;
+       }
++      /* get ready gpio */
++      skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
++      if (IS_ERR(skt->ready_gpio)) {
++              ret = PTR_ERR(skt->ready_gpio);
++              goto err;
++      }
++
+       /* resources are static */
+       sock->resource_ops = &pccard_static_ops;
+       sock->ops = &bcm63xx_pcmcia_operations;
+--- a/drivers/pcmcia/bcm63xx_pcmcia.h
++++ b/drivers/pcmcia/bcm63xx_pcmcia.h
+@@ -4,6 +4,7 @@
+ #include <linux/types.h>
+ #include <linux/timer.h>
++#include <linux/gpio/consumer.h>
+ #include <pcmcia/ss.h>
+ #include <bcm63xx_dev_pcmcia.h>
+@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
+       /* base address of io memory */
+       void __iomem *io_base;
++
++      /* ready gpio */
++      struct gpio_desc *ready_gpio;
+ };
+ #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/bcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
new file mode 100644 (file)
index 0000000..5d4265f
--- /dev/null
@@ -0,0 +1,96 @@
+From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Wed, 27 Jul 2016 11:38:05 +0200
+Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
+ documentation
+
+Add binding documentation for the pincontrol core found in BCM6318 SoCs.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
+ 1 file changed, 79 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
+@@ -0,0 +1,79 @@
++* Broadcom BCM6318 pin controller
++
++Required properties:
++- compatible: Must be "brcm,bcm6318-pinctrl".
++- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
++- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
++- gpio-controller: Identifies this node as a gpio controller.
++- #gpio-cells: Must be <2>.
++
++Example:
++
++pinctrl: pin-controller@10000080 {
++      compatible = "brcm,bcm6318-pinctrl";
++      reg = <0x10000080 0x08>,
++            <0x10000088 0x08>,
++            <0x10000098 0x04>,
++            <0x1000009c 0x0c>,
++            <0x100000d4 0x18>;
++      reg-names = "dirout", "dat", "mode", "mux", "pad";
++
++      gpio-controller;
++      #gpio-cells = <2>;
++};
++
++
++Available pins/groups and functions:
++
++name          pins    functions
++-----------------------------------------------------------
++gpio0         0       led, ephy0_spd_led
++gpio1         1       led, ephy1_spd_led
++gpio2         2       led, ephy2_spd_led
++gpio3         3       led, ephy3_spd_led
++gpio4         4       led, ephy0_act_led
++gpio5         5       led, ephy1_act_led
++gpio6         6       led, ephy2_act_led, serial_led_data
++gpio7         7       led, ephy3_act_led, serial_led_clk
++gpio8         8       led, inet_act_led
++gpio9         9       led, inet_fail_led
++gpio10                10      led, dsl_led
++gpio11                11      led, post_fail_led
++gpio12                12      led, wlan_wps_led
++gpio13                13      led, usb_pwron, usb_device_led
++gpio14                14      led
++gpio15                15      led
++gpio16                16      led
++gpio17                17      led
++gpio18                18      led
++gpio19                19      led
++gpio20                20      led
++gpio21                21      led
++gpio22                22      led
++gpio23                23      led
++gpio24                24      -
++gpio25                25      -
++gpio26                26      -
++gpio27                27      -
++gpio28                28      -
++gpio29                29      -
++gpio30                30      -
++gpio31                31      -
++gpio32                32      -
++gpio33                33      -
++gpio34                34      -
++gpio35                35      -
++gpio36                36      -
++gpio37                37      -
++gpio38                38      -
++gpio39                39      -
++gpio40                40      usb_active
++gpio41                41      -
++gpio42                42      -
++gpio43                43      -
++gpio44                44      -
++gpio45                45      -
++gpio46                46      -
++gpio47                47      -
++gpio48                48      -
++gpio49                49      -
diff --git a/target/linux/bcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
new file mode 100644 (file)
index 0000000..2a89dde
--- /dev/null
@@ -0,0 +1,609 @@
+From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 24 Jun 2016 22:20:39 +0200
+Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
+
+Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
+to different functions. BCM6318 is similar to BCM6328 with the addition
+of a pad register, and the GPIO meaning of the mux register changes
+based on the GPIO number.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/pinctrl/bcm63xx/Kconfig           |   7 +
+ drivers/pinctrl/bcm63xx/Makefile          |   1 +
+ drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
+ 3 files changed, 572 insertions(+)
+ create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
+
+--- a/drivers/pinctrl/bcm63xx/Kconfig
++++ b/drivers/pinctrl/bcm63xx/Kconfig
+@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
+       bool
+       select GPIO_GENERIC
++config PINCTRL_BCM6318
++      bool "BCM6318 pincontrol driver" if COMPILE_TEST
++      select PINMUX
++      select PINCONF
++      select PINCTRL_BCM63XX
++      select GENERIC_PINCONF
++
+ config PINCTRL_BCM6328
+       bool "BCM6328 pincontrol driver" if COMPILE_TEST
+       select PINMUX
+--- a/drivers/pinctrl/bcm63xx/Makefile
++++ b/drivers/pinctrl/bcm63xx/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
++obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
+ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
+ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
+ obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
+--- /dev/null
++++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
+@@ -0,0 +1,564 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinconf-generic.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/machine.h>
++
++#include "../core.h"
++#include "../pinctrl-utils.h"
++
++#include "pinctrl-bcm63xx.h"
++
++#define BCM6318_NGPIO         50
++
++struct bcm6318_pingroup {
++      const char *name;
++      const unsigned * const pins;
++      const unsigned num_pins;
++};
++
++struct bcm6318_function {
++      const char *name;
++      const char * const *groups;
++      const unsigned num_groups;
++
++      unsigned mode_val:1;
++      unsigned mux_val:2;
++};
++
++struct bcm6318_pinctrl {
++      struct pinctrl_dev *pctldev;
++      struct pinctrl_desc desc;
++
++      void __iomem *mode;
++      void __iomem *mux[3];
++      void __iomem *pad[6];
++
++      /* register access lock */
++      spinlock_t lock;
++
++      struct gpio_chip gpio[2];
++};
++
++static const struct pinctrl_pin_desc bcm6318_pins[] = {
++      PINCTRL_PIN(0, "gpio0"),
++      PINCTRL_PIN(1, "gpio1"),
++      PINCTRL_PIN(2, "gpio2"),
++      PINCTRL_PIN(3, "gpio3"),
++      PINCTRL_PIN(4, "gpio4"),
++      PINCTRL_PIN(5, "gpio5"),
++      PINCTRL_PIN(6, "gpio6"),
++      PINCTRL_PIN(7, "gpio7"),
++      PINCTRL_PIN(8, "gpio8"),
++      PINCTRL_PIN(9, "gpio9"),
++      PINCTRL_PIN(10, "gpio10"),
++      PINCTRL_PIN(11, "gpio11"),
++      PINCTRL_PIN(12, "gpio12"),
++      PINCTRL_PIN(13, "gpio13"),
++      PINCTRL_PIN(14, "gpio14"),
++      PINCTRL_PIN(15, "gpio15"),
++      PINCTRL_PIN(16, "gpio16"),
++      PINCTRL_PIN(17, "gpio17"),
++      PINCTRL_PIN(18, "gpio18"),
++      PINCTRL_PIN(19, "gpio19"),
++      PINCTRL_PIN(20, "gpio20"),
++      PINCTRL_PIN(21, "gpio21"),
++      PINCTRL_PIN(22, "gpio22"),
++      PINCTRL_PIN(23, "gpio23"),
++      PINCTRL_PIN(24, "gpio24"),
++      PINCTRL_PIN(25, "gpio25"),
++      PINCTRL_PIN(26, "gpio26"),
++      PINCTRL_PIN(27, "gpio27"),
++      PINCTRL_PIN(28, "gpio28"),
++      PINCTRL_PIN(29, "gpio29"),
++      PINCTRL_PIN(30, "gpio30"),
++      PINCTRL_PIN(31, "gpio31"),
++      PINCTRL_PIN(32, "gpio32"),
++      PINCTRL_PIN(33, "gpio33"),
++      PINCTRL_PIN(34, "gpio34"),
++      PINCTRL_PIN(35, "gpio35"),
++      PINCTRL_PIN(36, "gpio36"),
++      PINCTRL_PIN(37, "gpio37"),
++      PINCTRL_PIN(38, "gpio38"),
++      PINCTRL_PIN(39, "gpio39"),
++      PINCTRL_PIN(40, "gpio40"),
++      PINCTRL_PIN(41, "gpio41"),
++      PINCTRL_PIN(42, "gpio42"),
++      PINCTRL_PIN(43, "gpio43"),
++      PINCTRL_PIN(44, "gpio44"),
++      PINCTRL_PIN(45, "gpio45"),
++      PINCTRL_PIN(46, "gpio46"),
++      PINCTRL_PIN(47, "gpio47"),
++      PINCTRL_PIN(48, "gpio48"),
++      PINCTRL_PIN(49, "gpio49"),
++};
++
++static unsigned gpio0_pins[] = { 0 };
++static unsigned gpio1_pins[] = { 1 };
++static unsigned gpio2_pins[] = { 2 };
++static unsigned gpio3_pins[] = { 3 };
++static unsigned gpio4_pins[] = { 4 };
++static unsigned gpio5_pins[] = { 5 };
++static unsigned gpio6_pins[] = { 6 };
++static unsigned gpio7_pins[] = { 7 };
++static unsigned gpio8_pins[] = { 8 };
++static unsigned gpio9_pins[] = { 9 };
++static unsigned gpio10_pins[] = { 10 };
++static unsigned gpio11_pins[] = { 11 };
++static unsigned gpio12_pins[] = { 12 };
++static unsigned gpio13_pins[] = { 13 };
++static unsigned gpio14_pins[] = { 14 };
++static unsigned gpio15_pins[] = { 15 };
++static unsigned gpio16_pins[] = { 16 };
++static unsigned gpio17_pins[] = { 17 };
++static unsigned gpio18_pins[] = { 18 };
++static unsigned gpio19_pins[] = { 19 };
++static unsigned gpio20_pins[] = { 20 };
++static unsigned gpio21_pins[] = { 21 };
++static unsigned gpio22_pins[] = { 22 };
++static unsigned gpio23_pins[] = { 23 };
++static unsigned gpio24_pins[] = { 24 };
++static unsigned gpio25_pins[] = { 25 };
++static unsigned gpio26_pins[] = { 26 };
++static unsigned gpio27_pins[] = { 27 };
++static unsigned gpio28_pins[] = { 28 };
++static unsigned gpio29_pins[] = { 29 };
++static unsigned gpio30_pins[] = { 30 };
++static unsigned gpio31_pins[] = { 31 };
++static unsigned gpio32_pins[] = { 32 };
++static unsigned gpio33_pins[] = { 33 };
++static unsigned gpio34_pins[] = { 34 };
++static unsigned gpio35_pins[] = { 35 };
++static unsigned gpio36_pins[] = { 36 };
++static unsigned gpio37_pins[] = { 37 };
++static unsigned gpio38_pins[] = { 38 };
++static unsigned gpio39_pins[] = { 39 };
++static unsigned gpio40_pins[] = { 40 };
++static unsigned gpio41_pins[] = { 41 };
++static unsigned gpio42_pins[] = { 42 };
++static unsigned gpio43_pins[] = { 43 };
++static unsigned gpio44_pins[] = { 44 };
++static unsigned gpio45_pins[] = { 45 };
++static unsigned gpio46_pins[] = { 46 };
++static unsigned gpio47_pins[] = { 47 };
++static unsigned gpio48_pins[] = { 48 };
++static unsigned gpio49_pins[] = { 49 };
++
++#define BCM6318_GROUP(n)                                      \
++      {                                                       \
++              .name = #n,                                     \
++              .pins = n##_pins,                               \
++              .num_pins = ARRAY_SIZE(n##_pins),               \
++      }
++
++static struct bcm6318_pingroup bcm6318_groups[] = {
++      BCM6318_GROUP(gpio0),
++      BCM6318_GROUP(gpio1),
++      BCM6318_GROUP(gpio2),
++      BCM6318_GROUP(gpio3),
++      BCM6318_GROUP(gpio4),
++      BCM6318_GROUP(gpio5),
++      BCM6318_GROUP(gpio6),
++      BCM6318_GROUP(gpio7),
++      BCM6318_GROUP(gpio8),
++      BCM6318_GROUP(gpio9),
++      BCM6318_GROUP(gpio10),
++      BCM6318_GROUP(gpio11),
++      BCM6318_GROUP(gpio12),
++      BCM6318_GROUP(gpio13),
++      BCM6318_GROUP(gpio14),
++      BCM6318_GROUP(gpio15),
++      BCM6318_GROUP(gpio16),
++      BCM6318_GROUP(gpio17),
++      BCM6318_GROUP(gpio18),
++      BCM6318_GROUP(gpio19),
++      BCM6318_GROUP(gpio20),
++      BCM6318_GROUP(gpio21),
++      BCM6318_GROUP(gpio22),
++      BCM6318_GROUP(gpio23),
++      BCM6318_GROUP(gpio24),
++      BCM6318_GROUP(gpio25),
++      BCM6318_GROUP(gpio26),
++      BCM6318_GROUP(gpio27),
++      BCM6318_GROUP(gpio28),
++      BCM6318_GROUP(gpio29),
++      BCM6318_GROUP(gpio30),
++      BCM6318_GROUP(gpio31),
++      BCM6318_GROUP(gpio32),
++      BCM6318_GROUP(gpio33),
++      BCM6318_GROUP(gpio34),
++      BCM6318_GROUP(gpio35),
++      BCM6318_GROUP(gpio36),
++      BCM6318_GROUP(gpio37),
++      BCM6318_GROUP(gpio38),
++      BCM6318_GROUP(gpio39),
++      BCM6318_GROUP(gpio40),
++      BCM6318_GROUP(gpio41),
++      BCM6318_GROUP(gpio42),
++      BCM6318_GROUP(gpio43),
++      BCM6318_GROUP(gpio44),
++      BCM6318_GROUP(gpio45),
++      BCM6318_GROUP(gpio46),
++      BCM6318_GROUP(gpio47),
++      BCM6318_GROUP(gpio48),
++      BCM6318_GROUP(gpio49),
++};
++
++/* GPIO_MODE */
++static const char * const led_groups[] = {
++      "gpio0",
++      "gpio1",
++      "gpio2",
++      "gpio3",
++      "gpio4",
++      "gpio5",
++      "gpio6",
++      "gpio7",
++      "gpio8",
++      "gpio9",
++      "gpio10",
++      "gpio11",
++      "gpio12",
++      "gpio13",
++      "gpio14",
++      "gpio15",
++      "gpio16",
++      "gpio17",
++      "gpio18",
++      "gpio19",
++      "gpio20",
++      "gpio21",
++      "gpio22",
++      "gpio23",
++};
++
++/* PINMUX_SEL */
++static const char * const ephy0_spd_led_groups[] = {
++      "gpio0",
++};
++
++static const char * const ephy1_spd_led_groups[] = {
++      "gpio1",
++};
++
++static const char * const ephy2_spd_led_groups[] = {
++      "gpio2",
++};
++
++static const char * const ephy3_spd_led_groups[] = {
++      "gpio3",
++};
++
++static const char * const ephy0_act_led_groups[] = {
++      "gpio4",
++};
++
++static const char * const ephy1_act_led_groups[] = {
++      "gpio5",
++};
++
++static const char * const ephy2_act_led_groups[] = {
++      "gpio6",
++};
++
++static const char * const ephy3_act_led_groups[] = {
++      "gpio7",
++};
++
++static const char * const serial_led_data_groups[] = {
++      "gpio6",
++};
++
++static const char * const serial_led_clk_groups[] = {
++      "gpio7",
++};
++
++static const char * const inet_act_led_groups[] = {
++      "gpio8",
++};
++
++static const char * const inet_fail_led_groups[] = {
++      "gpio9",
++};
++
++static const char * const dsl_led_groups[] = {
++      "gpio10",
++};
++
++static const char * const post_fail_led_groups[] = {
++      "gpio11",
++};
++
++static const char * const wlan_wps_led_groups[] = {
++      "gpio12",
++};
++
++static const char * const usb_pwron_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_device_led_groups[] = {
++      "gpio13",
++};
++
++static const char * const usb_active_groups[] = {
++      "gpio40",
++};
++
++#define BCM6318_MODE_FUN(n)                           \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mode_val = 1,                          \
++      }
++
++#define BCM6318_MUX_FUN(n, mux)                               \
++      {                                               \
++              .name = #n,                             \
++              .groups = n##_groups,                   \
++              .num_groups = ARRAY_SIZE(n##_groups),   \
++              .mux_val = mux,                         \
++      }
++
++static const struct bcm6318_function bcm6318_funcs[] = {
++      BCM6318_MODE_FUN(led),
++      BCM6318_MUX_FUN(ephy0_spd_led, 1),
++      BCM6318_MUX_FUN(ephy1_spd_led, 1),
++      BCM6318_MUX_FUN(ephy2_spd_led, 1),
++      BCM6318_MUX_FUN(ephy3_spd_led, 1),
++      BCM6318_MUX_FUN(ephy0_act_led, 1),
++      BCM6318_MUX_FUN(ephy1_act_led, 1),
++      BCM6318_MUX_FUN(ephy2_act_led, 1),
++      BCM6318_MUX_FUN(ephy3_act_led, 1),
++      BCM6318_MUX_FUN(serial_led_data, 3),
++      BCM6318_MUX_FUN(serial_led_clk, 3),
++      BCM6318_MUX_FUN(inet_act_led, 1),
++      BCM6318_MUX_FUN(inet_fail_led, 1),
++      BCM6318_MUX_FUN(dsl_led, 1),
++      BCM6318_MUX_FUN(post_fail_led, 1),
++      BCM6318_MUX_FUN(wlan_wps_led, 1),
++      BCM6318_MUX_FUN(usb_pwron, 1),
++      BCM6318_MUX_FUN(usb_device_led, 2),
++      BCM6318_MUX_FUN(usb_active, 2),
++};
++
++static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6318_groups);
++}
++
++static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
++                                                unsigned group)
++{
++      return bcm6318_groups[group].name;
++}
++
++static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
++                                        unsigned group, const unsigned **pins,
++                                        unsigned *num_pins)
++{
++      *pins = bcm6318_groups[group].pins;
++      *num_pins = bcm6318_groups[group].num_pins;
++
++      return 0;
++}
++
++static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
++{
++      return ARRAY_SIZE(bcm6318_funcs);
++}
++
++static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
++                                               unsigned selector)
++{
++      return bcm6318_funcs[selector].name;
++}
++
++static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
++                                    unsigned selector,
++                                    const char * const **groups,
++                                    unsigned * const num_groups)
++{
++      *groups = bcm6318_funcs[selector].groups;
++      *num_groups = bcm6318_funcs[selector].num_groups;
++
++      return 0;
++}
++
++static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
++                          u32 mode, u32 mux)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      if (pin < 32) {
++              reg = __raw_readl(pctl->mode);
++              reg &= ~BIT(pin);
++              if (mode)
++                      reg |= BIT(pin);
++              __raw_writel(reg, pctl->mode);
++      }
++
++      if (pin < 48) {
++              reg = __raw_readl(pctl->mux[pin / 16]);
++              reg &= ~(3UL << ((pin % 16) * 2));
++              reg |= mux << ((pin % 16) * 2);
++              __raw_writel(reg, pctl->mux[pin / 16]);
++      }
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
++{
++      unsigned long flags;
++      u32 reg;
++
++      spin_lock_irqsave(&pctl->lock, flags);
++      reg = __raw_readl(pctl->pad[pin / 8]);
++      reg &= ~(0xfUL << ((pin % 8) * 4));
++      reg |= val << ((pin % 8) * 4);
++      __raw_writel(reg, pctl->pad[pin / 8]);
++      spin_unlock_irqrestore(&pctl->lock, flags);
++}
++
++static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
++                                 unsigned selector, unsigned group)
++{
++      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++      const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
++      const struct bcm6318_function *f = &bcm6318_funcs[selector];
++
++      bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
++
++      return 0;
++}
++
++static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
++                                     struct pinctrl_gpio_range *range,
++                                     unsigned offset)
++{
++      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
++
++      /* disable all functions using this pin */
++      if (offset < 13) {
++              /* GPIOs 0-12 use mux 0 as GPIO function */
++              bcm6318_rmw_mux(pctl, offset, 0, 0);
++      } else if (offset < 42) {
++              /* GPIOs 13-41 use mux 3 as GPIO function */
++              bcm6318_rmw_mux(pctl, offset, 0, 3);
++
++              /* FIXME: revert to old value for non gpio? */
++              bcm6318_set_pad(pctl, offset, 0);
++      } else {
++              /* no idea, really */
++      }
++
++      return 0;
++}
++
++static struct pinctrl_ops bcm6318_pctl_ops = {
++      .get_groups_count       = bcm6318_pinctrl_get_group_count,
++      .get_group_name         = bcm6318_pinctrl_get_group_name,
++      .get_group_pins         = bcm6318_pinctrl_get_group_pins,
++#ifdef CONFIG_OF
++      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
++      .dt_free_map            = pinctrl_utils_free_map,
++#endif
++};
++
++static struct pinmux_ops bcm6318_pmx_ops = {
++      .get_functions_count    = bcm6318_pinctrl_get_func_count,
++      .get_function_name      = bcm6318_pinctrl_get_func_name,
++      .get_function_groups    = bcm6318_pinctrl_get_groups,
++      .set_mux                = bcm6318_pinctrl_set_mux,
++      .gpio_request_enable    = bcm6318_gpio_request_enable,
++      .strict                 = true,
++};
++
++static int bcm6318_pinctrl_probe(struct platform_device *pdev)
++{
++      struct bcm6318_pinctrl *pctl;
++      struct resource *res;
++      void __iomem *mode, *mux, *pad;
++      unsigned i;
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
++      mode = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mode))
++              return PTR_ERR(mode);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
++      mux = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(mux))
++              return PTR_ERR(mux);
++
++      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
++      pad = devm_ioremap_resource(&pdev->dev, res);
++      if (IS_ERR(pad))
++              return PTR_ERR(pad);
++
++      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
++      if (!pctl)
++              return -ENOMEM;
++
++      spin_lock_init(&pctl->lock);
++
++      pctl->mode = mode;
++
++      for (i = 0; i < 3; i++)
++              pctl->mux[i] = mux + (i * 4);
++
++      for (i = 0; i < 6; i++)
++              pctl->pad[i] = pad + (i * 4);
++
++      pctl->desc.name = dev_name(&pdev->dev);
++      pctl->desc.owner = THIS_MODULE;
++      pctl->desc.pctlops = &bcm6318_pctl_ops;
++      pctl->desc.pmxops = &bcm6318_pmx_ops;
++
++      pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
++      pctl->desc.pins = bcm6318_pins;
++
++      platform_set_drvdata(pdev, pctl);
++
++      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
++                                               pctl->gpio, BCM6318_NGPIO);
++      if (IS_ERR(pctl->pctldev))
++              return PTR_ERR(pctl->pctldev);
++
++      return 0;
++}
++
++static const struct of_device_id bcm6318_pinctrl_match[] = {
++      { .compatible = "brcm,bcm6318-pinctrl", },
++      { },
++};
++
++static struct platform_driver bcm6318_pinctrl_driver = {
++      .probe = bcm6318_pinctrl_probe,
++      .driver = {
++              .name = "bcm6318-pinctrl",
++              .of_match_table = bcm6318_pinctrl_match,
++      },
++};
++
++builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/bcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch b/target/linux/bcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch
new file mode 100644 (file)
index 0000000..67c8cee
--- /dev/null
@@ -0,0 +1,65 @@
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6318
+ config BCM63XX_CPU_6328
+       bool "support 6328 CPU"
+@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6328
+ config BCM63XX_CPU_6338
+       bool "support 6338 CPU"
+@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
+       select SYS_HAS_CPU_BMIPS32_3300
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
++      select PINCTRL
++      select PINCTRL_BCM6348
+ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6358
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6362
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM6368
+ config BCM63XX_CPU_63268
+       bool "support 63268 CPU"
+@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
+       select HW_HAS_PCI
+       select BCM63XX_OHCI
+       select BCM63XX_EHCI
++      select PINCTRL
++      select PINCTRL_BCM63268
+ endmenu
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/bcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
new file mode 100644 (file)
index 0000000..fe4dbe3
--- /dev/null
@@ -0,0 +1,105 @@
+From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 31 Jul 2017 20:10:36 +0200
+Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
+
+---
+ arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
+       /* fixed rate clocks */
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
+       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
+@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
+@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
+       CLKDEV_INIT(NULL, "periph", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
++      CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
++      CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
+       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
++      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
+       /* gated clocks */
+       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
+       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/bcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/bcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
new file mode 100644 (file)
index 0000000..03b8bfc
--- /dev/null
@@ -0,0 +1,172 @@
+From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sat, 4 Feb 2017 12:58:50 +0100
+Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
+
+We now register them through DT, so no need to keep them here.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -27,9 +27,7 @@
+ #include <bcm63xx_dev_pci.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_flash.h>
+-#include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+-#include <bcm63xx_dev_spi.h>
+ #include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -236,10 +234,6 @@ int __init board_register_devices(void)
+            bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
+               pr_err(PFX "failed to register fallback SPROM\n");
+-      bcm63xx_spi_register();
+-
+-      bcm63xx_hsspi_register();
+-
+       bcm63xx_flash_register();
+       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+-                 dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
++                 dev-rng.o dev-uart.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+                  sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/platform_device.h>
+-
+-#include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_hsspi.h>
+-#include <bcm63xx_regs.h>
+-
+-static struct resource spi_resources[] = {
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .end            = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_hsspi_device = {
+-      .name           = "bcm63xx-hsspi",
+-      .id             = 0,
+-      .num_resources  = ARRAY_SIZE(spi_resources),
+-      .resource       = spi_resources,
+-};
+-
+-int __init bcm63xx_hsspi_register(void)
+-{
+-      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
+-              !BCMCPU_IS_63268())
+-              return -ENODEV;
+-
+-      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+-      spi_resources[0].end = spi_resources[0].start;
+-      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+-      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+-
+-      return platform_device_register(&bcm63xx_hsspi_device);
+-}
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ /dev/null
+@@ -1,60 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/export.h>
+-#include <linux/platform_device.h>
+-#include <linux/err.h>
+-#include <linux/clk.h>
+-
+-#include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_spi.h>
+-#include <bcm63xx_regs.h>
+-
+-static struct resource spi_resources[] = {
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .end            = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              .start          = -1, /* filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_spi_device = {
+-      .id             = -1,
+-      .num_resources  = ARRAY_SIZE(spi_resources),
+-      .resource       = spi_resources,
+-};
+-
+-int __init bcm63xx_spi_register(void)
+-{
+-      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+-              return -ENODEV;
+-
+-      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+-      spi_resources[0].end = spi_resources[0].start;
+-      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+-
+-      if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+-              bcm63xx_spi_device.name = "bcm6348-spi",
+-              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
+-      }
+-
+-      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+-              bcm63xx_spi_device.name = "bcm6358-spi",
+-              spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+-      }
+-
+-      return platform_device_register(&bcm63xx_spi_device);
+-}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
++++ /dev/null
+@@ -1,9 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
+-#ifndef BCM63XX_DEV_HSSPI_H
+-#define BCM63XX_DEV_HSSPI_H
+-
+-#include <linux/types.h>
+-
+-int bcm63xx_hsspi_register(void);
+-
+-#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/bcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/bcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch
new file mode 100644 (file)
index 0000000..e9d4481
--- /dev/null
@@ -0,0 +1,259 @@
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+-                 dev-rng.o dev-uart.o dev-wdt.o \
++                 dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+                  sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+--- a/arch/mips/bcm63xx/dev-uart.c
++++ /dev/null
+@@ -1,76 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+- */
+-
+-#include <linux/init.h>
+-#include <linux/kernel.h>
+-#include <linux/platform_device.h>
+-#include <bcm63xx_cpu.h>
+-
+-static struct resource uart0_resources[] = {
+-      {
+-              /* start & end filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              /* start filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct resource uart1_resources[] = {
+-      {
+-              /* start & end filled at runtime */
+-              .flags          = IORESOURCE_MEM,
+-      },
+-      {
+-              /* start filled at runtime */
+-              .flags          = IORESOURCE_IRQ,
+-      },
+-};
+-
+-static struct platform_device bcm63xx_uart_devices[] = {
+-      {
+-              .name           = "bcm63xx_uart",
+-              .id             = 0,
+-              .num_resources  = ARRAY_SIZE(uart0_resources),
+-              .resource       = uart0_resources,
+-      },
+-
+-      {
+-              .name           = "bcm63xx_uart",
+-              .id             = 1,
+-              .num_resources  = ARRAY_SIZE(uart1_resources),
+-              .resource       = uart1_resources,
+-      }
+-};
+-
+-int __init bcm63xx_uart_register(unsigned int id)
+-{
+-      if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+-              return -ENODEV;
+-
+-      if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
+-              !BCMCPU_IS_6368()))
+-              return -ENODEV;
+-
+-      if (id == 0) {
+-              uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+-              uart0_resources[0].end = uart0_resources[0].start +
+-                      RSET_UART_SIZE - 1;
+-              uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+-      }
+-
+-      if (id == 1) {
+-              uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
+-              uart1_resources[0].end = uart1_resources[0].start +
+-                      RSET_UART_SIZE - 1;
+-              uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
+-      }
+-
+-      return platform_device_register(&bcm63xx_uart_devices[id]);
+-}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
++++ /dev/null
+@@ -1,7 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
+-#ifndef BCM63XX_DEV_UART_H_
+-#define BCM63XX_DEV_UART_H_
+-
+-int bcm63xx_uart_register(unsigned int id);
+-
+-#endif /* BCM63XX_DEV_UART_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -32,8 +32,6 @@ struct board_info {
+       unsigned int    has_ohci0:1;
+       unsigned int    has_ehci0:1;
+       unsigned int    has_usbd:1;
+-      unsigned int    has_uart0:1;
+-      unsigned int    has_uart1:1;
+       unsigned int    use_fallback_sprom:1;
+       /* ethernet config */
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -20,7 +20,6 @@
+ #include <asm/prom.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+-#include <bcm63xx_dev_uart.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_gpio.h>
+@@ -188,12 +187,6 @@ int __init board_register_devices(void)
+       bcm63xx_gpio_init();
+-      if (board.has_uart0)
+-              bcm63xx_uart_register(0);
+-
+-      if (board.has_uart1)
+-              bcm63xx_uart_register(1);
+-
+       if (board.has_pccard)
+               bcm63xx_pcmcia_register();
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -35,9 +35,6 @@ static struct board_info __initdata boar
+       .name                           = "CVG834G_E15R3921",
+       .expected_cpu_id                = 0x3368,
+-      .has_uart0                      = 1,
+-      .has_uart1                      = 1,
+-
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
+@@ -67,7 +64,6 @@ static struct board_info __initdata boar
+       .name                           = "96328avng",
+       .expected_cpu_id                = 0x6328,
+-      .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .has_usbd                       = 0,
+       .use_fallback_sprom             = 1,
+@@ -116,7 +112,6 @@ static struct board_info __initdata boar
+       .name                           = "96338GW",
+       .expected_cpu_id                = 0x6338,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+@@ -159,7 +154,6 @@ static struct board_info __initdata boar
+       .name                           = "96338W",
+       .expected_cpu_id                = 0x6338,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+@@ -204,8 +198,6 @@ static struct board_info __initdata boar
+ static struct board_info __initdata board_96345gw2 = {
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+-
+-      .has_uart0                      = 1,
+ };
+ #endif
+@@ -217,7 +209,6 @@ static struct board_info __initdata boar
+       .name                           = "96348R",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_pci                        = 1,
+       .use_fallback_sprom             = 1,
+@@ -262,7 +253,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-10",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -315,7 +305,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-11",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -370,7 +359,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -421,7 +409,6 @@ static struct board_info __initdata boar
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -466,7 +453,6 @@ static struct board_info __initdata boar
+       .name                           = "DV201AMR",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_pci                        = 1,
+       .use_fallback_sprom             = 1,
+       .has_ohci0                      = 1,
+@@ -487,7 +473,6 @@ static struct board_info __initdata boar
+       .name                           = "96348GW-A",
+       .expected_cpu_id                = 0x6348,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -514,7 +499,6 @@ static struct board_info __initdata boar
+       .name                           = "96358VW",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -567,7 +551,6 @@ static struct board_info __initdata boar
+       .name                           = "96358VW2",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
+@@ -617,7 +600,6 @@ static struct board_info __initdata boar
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+-      .has_uart0                      = 1,
+       .has_enet0                      = 1,
+       .has_enet1                      = 1,
+       .has_pci                        = 1,
diff --git a/target/linux/bcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/bcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
new file mode 100644 (file)
index 0000000..e139426
--- /dev/null
@@ -0,0 +1,343 @@
+From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Feb 2015 17:52:32 +0100
+Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
+ 1 file changed, 262 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -43,14 +43,6 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+-      .leds = {
+-              {
+-                      .name           = "CVG834G:green:power",
+-                      .gpio           = 37,
+-                      .default_trigger= "default-on",
+-              },
+-      },
+-
+       .ephy_reset_gpio                = 36,
+       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+@@ -72,35 +64,6 @@ static struct board_info __initdata boar
+               .use_fullspeed          = 0,
+               .port_no                = 0,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "96328avng::ppp-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::power",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "96328avng::power-fail",
+-                      .gpio           = 8,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::wps",
+-                      .gpio           = 9,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "96328avng::ppp",
+-                      .gpio           = 11,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ #endif
+@@ -119,35 +82,6 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ses",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              }
+-      },
+ };
+ static struct board_info __initdata board_96338w = {
+@@ -159,35 +93,6 @@ static struct board_info __initdata boar
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ses",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ #endif
+@@ -217,36 +122,6 @@ static struct board_info __initdata boar
+               .has_phy                = 1,
+               .use_internal_phy       = 1,
+       },
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw_10 = {
+@@ -270,35 +145,6 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+       .has_pccard                     = 1,
+       .has_ehci0                      = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw_11 = {
+@@ -324,35 +170,6 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96348gw = {
+@@ -374,35 +191,6 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 2,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 3,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 0,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 1,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_FAST2404 = {
+@@ -518,33 +306,6 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl-fail",
+-                      .gpio           = 15,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp",
+-                      .gpio           = 22,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 23,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 4,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 5,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_96358vw2 = {
+@@ -571,29 +332,6 @@ static struct board_info __initdata boar
+       .has_pccard = 1,
+       .has_ehci0 = 1,
+       .num_usbh_ports                 = 2,
+-
+-      .leds = {
+-              {
+-                      .name           = "adsl",
+-                      .gpio           = 22,
+-                      .active_low     = 1,
+-              },
+-              {
+-                      .name           = "ppp-fail",
+-                      .gpio           = 23,
+-              },
+-              {
+-                      .name           = "power",
+-                      .gpio           = 5,
+-                      .active_low     = 1,
+-                      .default_trigger = "default-on",
+-              },
+-              {
+-                      .name           = "stop",
+-                      .gpio           = 4,
+-                      .active_low     = 1,
+-              },
+-      },
+ };
+ static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/bcm63xx/patches-4.19/400-bcm963xx_flashmap.patch b/target/linux/bcm63xx/patches-4.19/400-bcm963xx_flashmap.patch
new file mode 100644 (file)
index 0000000..c693ace
--- /dev/null
@@ -0,0 +1,65 @@
+From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
+ drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
+ drivers/mtd/redboot.c                     |   13 +++++++++--
+ 3 files changed, 38 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
+       }
+ };
+-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
++static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ static struct physmap_flash_data flash_data = {
+       .width                  = 2,
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
+       int nulllen = 0;
+       int numslots;
+       unsigned long offset;
++      unsigned long fis_origin = 0;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+       static char nullstring[] = "unallocated";
+ #endif
+@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
+               goto out;
+       }
++      if (data && data->origin) {
++              fis_origin = data->origin;
++      } else {
++              for (i = 0; i < numslots; i++) {
++                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
++                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
++                      }
++              }
++      }
++
+       for (i = 0; i < numslots; i++) {
+               struct fis_list *new_fl, **prev;
+@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
+                       goto out;
+               }
+               new_fl->img = &buf[i];
+-              if (data && data->origin)
+-                      buf[i].flash_base -= data->origin;
+-              else
+-                      buf[i].flash_base &= master->size-1;
++              if (fis_origin)
++                      buf[i].flash_base -= fis_origin;
++
++              buf[i].flash_base &= (master->size << 1) - 1;
+               /* I'm sure the JFFS2 code has done me permanent damage.
+                * I now think the following is _normal_
diff --git a/target/linux/bcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch b/target/linux/bcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch
new file mode 100644 (file)
index 0000000..efefba4
--- /dev/null
@@ -0,0 +1,27 @@
+--- a/include/linux/bcm963xx_tag.h
++++ b/include/linux/bcm963xx_tag.h
+@@ -92,8 +92,10 @@ struct bcm_tag {
+       __u32 rootfs_crc;
+       /* 224-227: CRC32 of kernel partition */
+       __u32 kernel_crc;
+-      /* 228-235: Unused at present */
+-      char reserved1[8];
++      /* 228-231: Unused at present */
++      char reserved1[4];
++      /* 222-235: Openwrt: real rootfs length */
++      __u32 real_rootfs_length;
+       /* 236-239: CRC32 of header excluding last 20 bytes */
+       __u32 header_crc;
+       /* 240-255: Unused at present */
+--- a/drivers/mtd/parsers/parser_imagetag.c
++++ b/drivers/mtd/parsers/parser_imagetag.c
+@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti
+               } else {
+                       /* OpenWrt layout */
+                       rootfsaddr = kerneladdr + kernellen;
+-                      rootfslen = spareaddr - rootfsaddr;
++                      rootfslen = buf->real_rootfs_length;
++                      spareaddr = rootfsaddr + rootfslen;
+               }
+       } else {
+               goto out;
diff --git a/target/linux/bcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/bcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644 (file)
index 0000000..c3b5778
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1634,7 +1634,7 @@ static int bcm_enet_change_mtu(struct ne
+               return -EBUSY;
+       /* add ethernet header + vlan tag size */
+-      actual_mtu += VLAN_ETH_HLEN;
++      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+       /*
+        * setup maximum size before we get overflow mark in
diff --git a/target/linux/bcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch b/target/linux/bcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch
new file mode 100644 (file)
index 0000000..efd9763
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G3_EXT_MII |
+                               GPIO_MODE_6348_G0_EXT_MII;
++              else if (BCMCPU_IS_6358())
++                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+       }
+       bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -652,6 +652,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
+ #define GPIO_MODE_6358_UTOPIA         (1 << 12)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
+ #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
+ #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/bcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
new file mode 100644 (file)
index 0000000..e30bd5b
--- /dev/null
@@ -0,0 +1,265 @@
+From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 6 Jan 2012 12:24:18 +0100
+Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
+
+Only connect/disconnect the phy during probe and remove, not during any
+open/close. The phy seldom changes during the runtime, and disconnecting
+the phy during close will prevent it from keeping any configuration over
+a down/up cycle.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
+ 1 file changed, 78 insertions(+), 80 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -867,10 +867,8 @@ static int bcm_enet_open(struct net_devi
+       struct bcm_enet_priv *priv;
+       struct sockaddr addr;
+       struct device *kdev;
+-      struct phy_device *phydev;
+       int i, ret;
+       unsigned int size;
+-      char phy_id[MII_BUS_ID_SIZE + 3];
+       void *p;
+       u32 val;
+@@ -878,40 +876,10 @@ static int bcm_enet_open(struct net_devi
+       kdev = &priv->pdev->dev;
+       if (priv->has_phy) {
+-              /* connect to PHY */
+-              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+-                       priv->mii_bus->id, priv->phy_id);
+-
+-              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
+-                                   PHY_INTERFACE_MODE_MII);
+-
+-              if (IS_ERR(phydev)) {
+-                      dev_err(kdev, "could not attach to PHY\n");
+-                      return PTR_ERR(phydev);
+-              }
+-
+-              /* mask with MAC supported features */
+-              phydev->supported &= (SUPPORTED_10baseT_Half |
+-                                    SUPPORTED_10baseT_Full |
+-                                    SUPPORTED_100baseT_Half |
+-                                    SUPPORTED_100baseT_Full |
+-                                    SUPPORTED_Autoneg |
+-                                    SUPPORTED_Pause |
+-                                    SUPPORTED_MII);
+-              phydev->advertising = phydev->supported;
+-
+-              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
+-                      phydev->advertising |= SUPPORTED_Pause;
+-              else
+-                      phydev->advertising &= ~SUPPORTED_Pause;
+-
+-              phy_attached_info(phydev);
+-
++              /* Reset state */
+               priv->old_link = 0;
+               priv->old_duplex = -1;
+               priv->old_pause = -1;
+-      } else {
+-              phydev = NULL;
+       }
+       /* mask all interrupts and request them */
+@@ -921,7 +889,7 @@ static int bcm_enet_open(struct net_devi
+       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+       if (ret)
+-              goto out_phy_disconnect;
++              return ret;
+       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
+                         dev->name, dev);
+@@ -1083,8 +1051,8 @@ static int bcm_enet_open(struct net_devi
+       enet_dmac_writel(priv, priv->dma_chan_int_mask,
+                        ENETDMAC_IRMASK, priv->tx_chan);
+-      if (phydev)
+-              phy_start(phydev);
++      if (priv->has_phy)
++              phy_start(dev->phydev);
+       else
+               bcm_enet_adjust_link(dev);
+@@ -1125,10 +1093,6 @@ out_freeirq_rx:
+ out_freeirq:
+       free_irq(dev->irq, dev);
+-out_phy_disconnect:
+-      if (phydev)
+-              phy_disconnect(phydev);
+-
+       return ret;
+ }
+@@ -1233,10 +1197,6 @@ static int bcm_enet_stop(struct net_devi
+       free_irq(priv->irq_rx, dev);
+       free_irq(dev->irq, dev);
+-      /* release phy */
+-      if (priv->has_phy)
+-              phy_disconnect(dev->phydev);
+-
+       return 0;
+ }
+@@ -1802,14 +1762,47 @@ static int bcm_enet_probe(struct platfor
+       /* do minimal hardware init to be able to probe mii bus */
+       bcm_enet_hw_preinit(priv);
++      spin_lock_init(&priv->rx_lock);
++
++      /* init rx timeout (used for oom) */
++      timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
++
++      /* init the mib update lock&work */
++      mutex_init(&priv->mib_update_lock);
++      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
++
++      /* zero mib counters */
++      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
++              enet_writel(priv, 0, ENET_MIB_REG(i));
++
++      /* register netdevice */
++      dev->netdev_ops = &bcm_enet_ops;
++      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
++
++      dev->ethtool_ops = &bcm_enet_ethtool_ops;
++      /* MTU range: 46 - 2028 */
++      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
++      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
++      SET_NETDEV_DEV(dev, &pdev->dev);
++
++      ret = register_netdev(dev);
++      if (ret)
++              goto out_uninit_hw;
++
++      netif_carrier_off(dev);
++      platform_set_drvdata(pdev, dev);
++      priv->pdev = pdev;
++      priv->net_dev = dev;
+       /* MII bus registration */
+       if (priv->has_phy) {
++              struct phy_device *phydev;
++              char phy_id[MII_BUS_ID_SIZE + 3];
+               priv->mii_bus = mdiobus_alloc();
+               if (!priv->mii_bus) {
+                       ret = -ENOMEM;
+-                      goto out_uninit_hw;
++                      goto out_unregister_netdev;
+               }
+               bus = priv->mii_bus;
+@@ -1833,6 +1826,35 @@ static int bcm_enet_probe(struct platfor
+                       dev_err(&pdev->dev, "unable to register mdio bus\n");
+                       goto out_free_mdio;
+               }
++
++              /* connect to PHY */
++              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
++                       priv->mii_bus->id, priv->phy_id);
++
++              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
++                                   PHY_INTERFACE_MODE_MII);
++
++              if (IS_ERR(phydev)) {
++                      dev_err(&pdev->dev, "could not attach to PHY\n");
++                      goto out_unregister_mdio;
++              }
++
++              /* mask with MAC supported features */
++              phydev->supported &= (SUPPORTED_10baseT_Half |
++                                    SUPPORTED_10baseT_Full |
++                                    SUPPORTED_100baseT_Half |
++                                    SUPPORTED_100baseT_Full |
++                                    SUPPORTED_Autoneg |
++                                    SUPPORTED_Pause |
++                                    SUPPORTED_MII);
++              phydev->advertising = phydev->supported;
++
++              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
++                      phydev->advertising |= SUPPORTED_Pause;
++              else
++                      phydev->advertising &= ~SUPPORTED_Pause;
++
++              phy_attached_info(phydev);
+       } else {
+               /* run platform code to initialize PHY device */
+@@ -1840,45 +1862,16 @@ static int bcm_enet_probe(struct platfor
+                   pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
+                                  bcm_enet_mdio_write_mii)) {
+                       dev_err(&pdev->dev, "unable to configure mdio bus\n");
+-                      goto out_uninit_hw;
++                      goto out_unregister_netdev;
+               }
+       }
+-      spin_lock_init(&priv->rx_lock);
+-
+-      /* init rx timeout (used for oom) */
+-      timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
+-
+-      /* init the mib update lock&work */
+-      mutex_init(&priv->mib_update_lock);
+-      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
+-
+-      /* zero mib counters */
+-      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
+-              enet_writel(priv, 0, ENET_MIB_REG(i));
+-
+-      /* register netdevice */
+-      dev->netdev_ops = &bcm_enet_ops;
+-      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
+-
+-      dev->ethtool_ops = &bcm_enet_ethtool_ops;
+-      /* MTU range: 46 - 2028 */
+-      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
+-      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
+-      SET_NETDEV_DEV(dev, &pdev->dev);
+-
+-      ret = register_netdev(dev);
+-      if (ret)
+-              goto out_unregister_mdio;
+-
+-      netif_carrier_off(dev);
+-      platform_set_drvdata(pdev, dev);
+-      priv->pdev = pdev;
+-      priv->net_dev = dev;
+-
+       return 0;
+ out_unregister_mdio:
++      if (dev->phydev)
++              phy_disconnect(dev->phydev);
++
+       if (priv->mii_bus)
+               mdiobus_unregister(priv->mii_bus);
+@@ -1886,6 +1879,9 @@ out_free_mdio:
+       if (priv->mii_bus)
+               mdiobus_free(priv->mii_bus);
++out_unregister_netdev:
++      unregister_netdev(dev);
++
+ out_uninit_hw:
+       /* turn off mdc clock */
+       enet_writel(priv, 0, ENET_MIISC_REG);
+@@ -1916,6 +1912,7 @@ static int bcm_enet_remove(struct platfo
+       enet_writel(priv, 0, ENET_MIISC_REG);
+       if (priv->has_phy) {
++              phy_disconnect(dev->phydev);
+               mdiobus_unregister(priv->mii_bus);
+               mdiobus_free(priv->mii_bus);
+       } else {
diff --git a/target/linux/bcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/bcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
new file mode 100644 (file)
index 0000000..86940ae
--- /dev/null
@@ -0,0 +1,53 @@
+From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 15 Jul 2012 20:08:57 +0200
+Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
+ 2 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -968,6 +968,19 @@
+ #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
+ #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
++/* Port RGMII control register */
++#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
++#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
++#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
++#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
++#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
++#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
++#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
++#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
++
++/* Port RGMII timing register */
++#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
++
+ /* MDIO control register */
+ #define ENETSW_MDIOC_REG              (0xb0)
+ #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2185,6 +2185,18 @@ static int bcm_enetsw_open(struct net_de
+               priv->sw_port_link[i] = 0;
+       }
++      /* enable external ports */
++      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
++              u8 rgmii_ctrl;
++
++              if (!priv->used_ports[i].used)
++                      continue;
++
++              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
++              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
++      }
++
+       /* reset mib */
+       val = enetsw_readb(priv, ENETSW_GMCR_REG);
+       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/bcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/bcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
new file mode 100644 (file)
index 0000000..a91494d
--- /dev/null
@@ -0,0 +1,157 @@
+From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 15:00:38 +0200
+Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
+ 2 files changed, 33 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -17,6 +17,9 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
+ #include <linux/mtd/spi-nor.h>
++#include <linux/of.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
+       mtd_resources[0].end = end;
+ }
++static struct spi_board_info bcm63xx_spi_flash_info[] = {
++      {
++              .bus_num        = 0,
++              .chip_select    = 0,
++              .mode           = 0,
++              .max_speed_hz   = 781000,
++              .modalias       = "m25p80",
++      },
++};
++
++static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
++                                             unsigned int new_hz)
++{
++      struct property *max_hz;
++      __be32 *hz;
++
++      max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
++      if (!max_hz)
++              return;
++
++      max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
++      if (!max_hz->name) {
++              kfree(max_hz);
++              return;
++      }
++
++      max_hz->value = max_hz + 1;
++      max_hz->length = sizeof(*hz);
++
++      hz = max_hz->value;
++      *hz = cpu_to_be32(new_hz);
++
++      of_update_property(np, max_hz);
++}
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+       u32 val;
+@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6318_CPU_ID:
+               /* only support serial flash */
++              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
+               return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6328_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
++
+               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+       case BCM6362_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+                       return BCM63XX_FLASH_TYPE_NAND;
+       case BCM6368_CPU_ID:
+               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
++              if (val & STRAPBUS_6368_SPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+               case STRAPBUS_6368_BOOT_SEL_NAND:
+                       return BCM63XX_FLASH_TYPE_NAND;
+@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t
+               }
+       case BCM63268_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
+                       return BCM63XX_FLASH_TYPE_SERIAL;
+               else
+@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void)
+ int __init bcm63xx_flash_register(void)
+ {
++      struct device_node *np;
+       u32 val;
+       switch (flash_type) {
+@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void)
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+-              pr_warn("unsupported serial flash detected\n");
+-              return -ENODEV;
++              np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
++              if (np) {
++                      bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
++                      of_node_put(np);
++                      return 0;
++              } else {
++                      return -ENODEV;
++              }
+       case BCM63XX_FLASH_TYPE_NAND:
+               pr_warn("unsupported NAND flash detected\n");
+               return -ENODEV;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -709,6 +709,7 @@
+ #define GPIO_STRAPBUS_REG             0x40
+ #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
+ #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
++#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
+ #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
+ #define STRAPBUS_6368_BOOT_SEL_NAND   0
+ #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
+@@ -1565,6 +1566,7 @@
+ #define IDDQ_CTRL_63268_USBH          (1 << 4)
+ #define MISC_STRAPBUS_6328_REG                0x240
++#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+ #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/bcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/bcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
new file mode 100644 (file)
index 0000000..16d47b4
--- /dev/null
@@ -0,0 +1,72 @@
+From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:40:03 +0200
+Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
+ 2 files changed, 18 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -31,6 +31,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include <pci_ath9k_fixup.h>
+ #include "board_common.h"
+@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
+ int __init board_register_devices(void)
+ {
+       int usbh_ports = 0;
++      int i;
+ #if CONFIG_OF
+       if (of_have_populated_dt()) {
+@@ -241,6 +243,10 @@ int __init board_register_devices(void)
+                                       board.ephy_reset_gpio_flags);
+       }
++      /* register any fixups */
++      for (i = 0; i < board.has_caldata; i++)
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++
+       return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -9,6 +9,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_fallback_sprom.h>
++#include <pci_ath9k_fixup.h>
+ /*
+  * flash mapping
+@@ -16,6 +17,11 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
++struct ath9k_caldata {
++      unsigned int    slot;
++      u32             caldata_offset;
++};
++
+ /*
+  * board definition
+  */
+@@ -33,6 +39,10 @@ struct board_info {
+       unsigned int    has_ehci0:1;
+       unsigned int    has_usbd:1;
+       unsigned int    use_fallback_sprom:1;
++      unsigned int    has_caldata:2;
++
++      /* wifi calibration data config */
++      struct ath9k_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/bcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/bcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
new file mode 100644 (file)
index 0000000..9fbfae4
--- /dev/null
@@ -0,0 +1,31 @@
+From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 13 Jan 2014 12:12:30 +0100
+Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void)
+               return -ENODEV;
+       }
+ }
++
++int bcm63xx_flash_get_type(void)
++{
++      return flash_type;
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
+ int __init bcm63xx_flash_register(void);
++int bcm63xx_flash_get_type(void);
++
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/bcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/bcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
new file mode 100644 (file)
index 0000000..c9d2ee1
--- /dev/null
@@ -0,0 +1,237 @@
+From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:36:11 +0200
+Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    3 +-
+ arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
+ 3 files changed, 199 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+-                 sprom.o
++                 pci-ath9k-fixup.o sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -0,0 +1,200 @@
++/*
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  Based on
++ *
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/ath9k_platform.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_flash.h>
++#include <pci_ath9k_fixup.h>
++
++#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
++
++struct ath9k_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct ath9k_platform_data pdata;
++};
++
++static int ath9k_num_fixups;
++static struct ath9k_fixup ath9k_fixups[2] = {
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++      {
++              .slot = 255,
++              .pdata = {
++                      .led_pin        = -1,
++              },
++      },
++};
++
++static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
++{
++      u32 addr;
++
++      if (BCMCPU_IS_6328()) {
++              addr = 0x18000000;
++      } else {
++              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
++              addr &= MPI_CSBASE_BASE_MASK;
++      }
++
++      switch (bcm63xx_flash_get_type()) {
++      case BCM63XX_FLASH_TYPE_PARALLEL:
++              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++              return eeprom;
++      case BCM63XX_FLASH_TYPE_SERIAL:
++              /* the first megabyte is memory mapped */
++              if (offset < 0x100000) {
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      return eeprom;
++              }
++
++              if (BCMCPU_IS_6328()) {
++                      /* we can change the memory mapped megabyte */
++                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
++                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++                      bcm_hsspi_writel(0, 0x18);
++                      return eeprom;
++              }
++              /* can't do anything here without talking to the SPI controller. */
++      case BCM63XX_FLASH_TYPE_NAND:
++      default:
++              return NULL;
++      }
++}
++
++static void ath9k_pci_fixup(struct pci_dev *dev)
++{
++      void __iomem *mem;
++      struct ath9k_platform_data *pdata = NULL;
++      struct pci_dev *bridge = pci_upstream_bridge(dev);
++      u16 *cal_data = NULL;
++      u16 cmd;
++      u32 bar0;
++      u32 val;
++      unsigned i;
++
++      for (i = 0; i < ath9k_num_fixups; i++) {
++              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              cal_data = ath9k_fixups[i].pdata.eeprom_data;
++              pdata = &ath9k_fixups[i].pdata;
++              break;
++      }
++
++      if (cal_data == NULL)
++              return;
++
++      if (*cal_data != 0xa55a) {
++              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++              return;
++      }
++
++      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++      switch (bcm63xx_get_cpu_id()) {
++      case BCM6328_CPU_ID:
++              val = BCM_PCIE_MEM_BASE_PA_6328;
++              break;
++      case BCM6348_CPU_ID:
++      case BCM6358_CPU_ID:
++      case BCM6368_CPU_ID:
++              val = BCM_PCI_MEM_BASE_PA;
++              break;
++      default:
++              BUG();
++      }
++
++      mem = ioremap(val, 0x10000);
++      if (!mem) {
++              pr_err("pci %s: ioremap error\n", pci_name(dev));
++              return;
++      }
++
++      if (bridge)
++              pci_enable_device(bridge);
++
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      /* set offset to first reg address */
++      cal_data += 3;
++      while(*cal_data != 0xffff) {
++              u32 reg;
++              reg = *cal_data++;
++              val = *cal_data++;
++              val |= (*cal_data++) << 16;
++
++              writel(val, mem + reg);
++              udelay(100);
++      }
++
++      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++      dev->vendor = val & 0xffff;
++      dev->device = (val >> 16) & 0xffff;
++
++      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++      dev->revision = val & 0xff;
++      dev->class = val >> 8; /* upper 3 bytes */
++
++      pci_read_config_word(dev, PCI_COMMAND, &cmd);
++      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++      pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++      if (bridge)
++              pci_disable_device(bridge);
++
++      iounmap(mem);
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
++
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++{
++      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].slot = slot;
++
++      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
++              return;
++
++      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
++              return;
++
++      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
++      ath9k_num_fixups++;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -0,0 +1,7 @@
++#ifndef _PCI_ATH9K_FIXUP
++#define _PCI_ATH9K_FIXUP
++
++
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++
++#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/bcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch
new file mode 100644 (file)
index 0000000..2076879
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -2,6 +2,7 @@
+ #define _PCI_ATH9K_FIXUP
+-void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -20,6 +20,7 @@
+ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
++      unsigned int    endian_check:1;
+ };
+ /*
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+-void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++      unsigned endian_check)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
++      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -245,7 +245,8 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
++                      board.caldata[i].endian_check);
+       return 0;
+ }
diff --git a/target/linux/bcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/bcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch
new file mode 100644 (file)
index 0000000..bb111dc
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -246,7 +246,7 @@ int __init board_register_devices(void)
+       /* register any fixups */
+       for (i = 0; i < board.has_caldata; i++)
+               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check);
++                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
+       return 0;
+ }
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+ void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check)
++      unsigned endian_check, int led_pin, bool led_active_high)
+ {
+       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+               return;
+       ath9k_fixups[ath9k_num_fixups].slot = slot;
+       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
++      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
++      ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
+       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+               return;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -21,6 +21,8 @@ struct ath9k_caldata {
+       unsigned int    slot;
+       u32             caldata_offset;
+       unsigned int    endian_check:1;
++      int             led_pin;
++      bool            led_active_high;
+ };
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -3,6 +3,6 @@
+ void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-      unsigned endian_check) __init;
++      unsigned endian_check, int led_pin, bool led_active_high) __init;
+ #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/bcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/bcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
new file mode 100644 (file)
index 0000000..cc980a1
--- /dev/null
@@ -0,0 +1,185 @@
+From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 7 Jan 2013 17:45:39 +0100
+Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
+ arch/mips/bcm63xx/dev-flash.c                      |    2 +-
+ arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
+ .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
+ 7 files changed, 104 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
+                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+                  dev-rng.o dev-wdt.o \
+                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
+-                 pci-ath9k-fixup.o sprom.o
++                 pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
+ obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
+ obj-y         += boards/
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -32,6 +32,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ #include "board_common.h"
+@@ -244,9 +245,19 @@ int __init board_register_devices(void)
+       }
+       /* register any fixups */
+-      for (i = 0; i < board.has_caldata; i++)
+-              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
++      for (i = 0; i < board.has_caldata; i++) {
++              switch (board.caldata[i].vendor) {
++              case PCI_VENDOR_ID_ATHEROS:
++                      pci_enable_ath9k_fixup(board.caldata[i].slot,
++                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
++                              board.caldata[i].led_pin, board.caldata[i].led_active_high);
++                      break;
++              case PCI_VENDOR_ID_RALINK:
++                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
++                              board.caldata[i].eeprom);
++                      break;
++              }
++      }
+       return 0;
+ }
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
+@@ -0,0 +1,72 @@
++/*
++ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
++ *
++ *  Based on
++ *
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++#include <bcm63xx_nvram.h>
++#include <pci_rt2x00_fixup.h>
++
++struct rt2x00_fixup {
++      unsigned slot;
++      u8 mac[ETH_ALEN];
++      struct rt2x00_platform_data pdata;
++};
++
++static int rt2x00_num_fixups;
++static struct rt2x00_fixup rt2x00_fixups[2] = {
++      {
++              .slot = 255,
++      },
++      {
++              .slot = 255,
++      },
++};
++
++static void rt2x00_pci_fixup(struct pci_dev *dev)
++{
++      unsigned i;
++      struct rt2x00_platform_data *pdata = NULL;
++
++      for (i = 0; i < rt2x00_num_fixups; i++) {
++              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
++                      continue;
++
++              pdata = &rt2x00_fixups[i].pdata;
++              break;
++      }
++
++      dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
++
++void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
++{
++      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
++      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++
++      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
++              return;
++
++      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
++      rt2x00_num_fixups++;
++}
++
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -10,6 +10,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_fallback_sprom.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ /*
+  * flash mapping
+@@ -17,12 +18,16 @@
+ #define BCM963XX_CFE_VERSION_OFFSET   0x570
+ #define BCM963XX_NVRAM_OFFSET         0x580
+-struct ath9k_caldata {
++struct bcm63xx_caldata {
++      unsigned int    vendor;
+       unsigned int    slot;
+       u32             caldata_offset;
++      /* Atheros */
+       unsigned int    endian_check:1;
+       int             led_pin;
+       bool            led_active_high;
++      /* Ralink */
++      char*           eeprom;
+ };
+ /*
+@@ -45,7 +50,7 @@ struct board_info {
+       unsigned int    has_caldata:2;
+       /* wifi calibration data config */
+-      struct ath9k_caldata caldata[2];
++      struct bcm63xx_caldata caldata[2];
+       /* ethernet config */
+       struct bcm63xx_enet_platform_data enet0;
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+@@ -0,0 +1,9 @@
++#ifndef _PCI_RT2X00_FIXUP
++#define _PCI_RT2X00_FIXUP
++
++#define PCI_VENDOR_ID_RALINK 0x1814
++
++void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
++
++#endif /* _PCI_RT2X00_FIXUP */
++
diff --git a/target/linux/bcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch b/target/linux/bcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch
new file mode 100644 (file)
index 0000000..3f093cf
--- /dev/null
@@ -0,0 +1,169 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -332,6 +332,9 @@ struct bcm_enet_priv {
+       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+       int sw_port_link[ENETSW_MAX_PORT];
++      /* platform device for associated switch */
++      struct platform_device *b53_device;
++
+       /* used to poll switch port state */
+       struct timer_list swphy_poll;
+       spinlock_t enetsw_mdio_lock;
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/platform_data/b53.h>
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -1932,7 +1933,8 @@ static int bcm_enet_remove(struct platfo
+       return 0;
+ }
+-struct platform_driver bcm63xx_enet_driver = {
++
++static struct platform_driver bcm63xx_enet_driver = {
+       .probe  = bcm_enet_probe,
+       .remove = bcm_enet_remove,
+       .driver = {
+@@ -1941,6 +1943,42 @@ struct platform_driver bcm63xx_enet_driv
+       },
+ };
++struct b53_platform_data bcm63xx_b53_pdata = {
++      .chip_id = 0x6300,
++      .big_endian = 1,
++};
++
++struct platform_device bcm63xx_b53_dev = {
++      .name           = "b53-switch",
++      .id             = -1,
++      .dev            = {
++              .platform_data = &bcm63xx_b53_pdata,
++      },
++};
++
++static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
++{
++      int ret;
++
++      bcm63xx_b53_pdata.regs = priv->base;
++      bcm63xx_b53_pdata.enabled_ports = port_mask;
++      bcm63xx_b53_pdata.alias = priv->net_dev->name;
++
++      ret = platform_device_register(&bcm63xx_b53_dev);
++      if (!ret)
++              priv->b53_device = &bcm63xx_b53_dev;
++
++      return ret;
++}
++
++static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
++{
++      if (priv->b53_device)
++              platform_device_unregister(&bcm63xx_b53_dev);
++
++      priv->b53_device = NULL;
++}
++
+ /*
+  * switch mii access callbacks
+  */
+@@ -2197,29 +2235,6 @@ static int bcm_enetsw_open(struct net_de
+               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+       }
+-      /* reset mib */
+-      val = enetsw_readb(priv, ENETSW_GMCR_REG);
+-      val |= ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-      val &= ~ENETSW_GMCR_RST_MIB_MASK;
+-      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-      mdelay(1);
+-
+-      /* force CPU port state */
+-      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
+-      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
+-      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
+-
+-      /* enable switch forward engine */
+-      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
+-      val |= ENETSW_SWMODE_FWD_EN_MASK;
+-      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
+-
+-      /* enable jumbo on all ports */
+-      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
+-      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
+-
+       /* initialize flow control buffer allocation */
+       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
+@@ -2675,6 +2690,9 @@ static int bcm_enetsw_probe(struct platf
+       struct bcm63xx_enetsw_platform_data *pd;
+       struct resource *res_mem;
+       int ret, irq_rx, irq_tx;
++      unsigned i, num_ports = 0;
++      u16 port_mask = BIT(8);
++      u8 val;
+       if (!bcm_enet_shared_base[0])
+               return -EPROBE_DEFER;
+@@ -2755,6 +2773,43 @@ static int bcm_enetsw_probe(struct platf
+       priv->pdev = pdev;
+       priv->net_dev = dev;
++      /* reset mib */
++      val = enetsw_readb(priv, ENETSW_GMCR_REG);
++      val |= ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++      val &= ~ENETSW_GMCR_RST_MIB_MASK;
++      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++      mdelay(1);
++
++      /* force CPU port state */
++      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
++      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
++      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
++
++      /* enable switch forward engine */
++      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
++      val |= ENETSW_SWMODE_FWD_EN_MASK;
++      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
++
++      /* enable jumbo on all ports */
++      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
++      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
++
++      for (i = 0; i < priv->num_ports; i++) {
++              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
++
++              if (!port->used)
++                      continue;
++
++              num_ports++;
++              port_mask |= BIT(i);
++      }
++
++      /* only register if there is more than one external port */
++      if (num_ports > 1)
++              bcmenet_switch_register(priv, port_mask);
++
+       return 0;
+ out_disable_clk:
+@@ -2776,6 +2831,9 @@ static int bcm_enetsw_remove(struct plat
+       priv = netdev_priv(dev);
+       unregister_netdev(dev);
++      /* remove switch */
++      bcmenet_switch_unregister(priv);
++
+       clk_disable_unprepare(priv->mac_clk);
+       free_netdev(dev);
diff --git a/target/linux/bcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/bcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch
new file mode 100644 (file)
index 0000000..e956dea
--- /dev/null
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2734,9 +2734,9 @@ static int bcm_enetsw_probe(struct platf
+       if (ret)
+               goto out;
+-      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
+-      if (IS_ERR(priv->base)) {
+-              ret = PTR_ERR(priv->base);
++      priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
++      if (priv->base == NULL) {
++              ret = -ENOMEM;
+               goto out;
+       }
diff --git a/target/linux/bcm63xx/patches-4.19/427-boards_probe_switch.patch b/target/linux/bcm63xx/patches-4.19/427-boards_probe_switch.patch
new file mode 100644 (file)
index 0000000..4b206a2
--- /dev/null
@@ -0,0 +1,119 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -77,6 +77,8 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -90,6 +92,8 @@ static struct board_info __initdata boar
+       .has_enet0                      = 1,
+       .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -138,6 +142,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -162,6 +168,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -186,6 +194,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -208,6 +218,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -231,6 +243,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -252,6 +266,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -271,6 +287,8 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -298,6 +316,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -323,6 +343,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -348,6 +370,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
+@@ -371,6 +395,8 @@ static struct board_info __initdata boar
+       },
+       .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       },
diff --git a/target/linux/bcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch b/target/linux/bcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch
new file mode 100644 (file)
index 0000000..dd63183
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -46,7 +46,7 @@ static struct board_info __initdata boar
+       .ephy_reset_gpio                = 36,
+       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_3368 */
+ /*
+  * known 6328 boards
+@@ -65,7 +65,7 @@ static struct board_info __initdata boar
+               .port_no                = 0,
+       },
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+  * known 6338 boards
+@@ -98,7 +98,7 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+  * known 6345 boards
+@@ -108,7 +108,7 @@ static struct board_info __initdata boar
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+  * known 6348 boards
+@@ -295,7 +295,7 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+  * known 6358 boards
+@@ -403,7 +403,7 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
+-#endif
++#endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+  * all boards
diff --git a/target/linux/bcm63xx/patches-4.19/500-board-D4PW.patch b/target/linux/bcm63xx/patches-4.19/500-board-D4PW.patch
new file mode 100644 (file)
index 0000000..456b2a4
--- /dev/null
@@ -0,0 +1,40 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -295,6 +295,21 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++      .name                           = "D-4P-W",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -431,6 +446,7 @@ static const struct board_info __initcon
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
++      &board_96348_D4PW,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.19/501-board-NB4.patch b/target/linux/bcm63xx/patches-4.19/501-board-NB4.patch
new file mode 100644 (file)
index 0000000..41c8a7e
--- /dev/null
@@ -0,0 +1,81 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -418,6 +418,60 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++      .name                           = "NB4-SER-r0",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++      .name                           = "NB4-FXC-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -454,6 +508,8 @@ static const struct board_info __initcon
+       &board_96358vw2,
+       &board_AGPFS0,
+       &board_DWVS0,
++      &board_nb4_ser_r0,
++      &board_nb4_fxc_r1,
+ #endif
+ };
+@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
++      { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
++      { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/502-board-96338W2_E7T.patch b/target/linux/bcm63xx/patches-4.19/502-board-96338W2_E7T.patch
new file mode 100644 (file)
index 0000000..69cc716
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -98,6 +98,20 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct board_info __initdata board_96338w2_e7t = {
++      .name                           = "96338W2_E7T",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+@@ -487,6 +501,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+       &board_96338w,
++      &board_96338w2_e7t,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
+       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++      { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/bcm63xx/patches-4.19/503-board-CPVA642.patch b/target/linux/bcm63xx/patches-4.19/503-board-CPVA642.patch
new file mode 100644 (file)
index 0000000..9e3c4e0
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -385,6 +385,25 @@ static struct board_info __initdata boar
+       .num_usbh_ports                 = 2,
+ };
++static struct board_info __initdata board_CPVA642 = {
++      .name                           = "CPVA642",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+       .name                           = "AGPF-S0",
+       .expected_cpu_id                = 0x6358,
+@@ -522,6 +541,7 @@ static const struct board_info __initcon
+       &board_96358vw,
+       &board_96358vw2,
+       &board_AGPFS0,
++      &board_CPVA642,
+       &board_DWVS0,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
+       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
++      { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch b/target/linux/bcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch
new file mode 100644 (file)
index 0000000..e78832e
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -452,6 +452,22 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++      .name                           = "AW4139",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
+ static struct board_info __initdata board_nb4_ser_r0 = {
+       .name                           = "NB4-SER-r0",
+       .expected_cpu_id                = 0x6358,
+@@ -543,6 +559,7 @@ static const struct board_info __initcon
+       &board_AGPFS0,
+       &board_CPVA642,
+       &board_DWVS0,
++      &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+ #endif
+@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.19/505-board_spw500v.patch b/target/linux/bcm63xx/patches-4.19/505-board_spw500v.patch
new file mode 100644 (file)
index 0000000..f5ca73d
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -324,6 +324,36 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct sprom_fixup __initdata spw500v_fixups[] = {
++      { .offset = 46, .value = 0x3046 },
++      { .offset = 47, .value = 0x15a7 },
++      { .offset = 48, .value = 0xfa89 },
++      { .offset = 49, .value = 0xfe79 },
++      { .offset = 57, .value = 0x6a49 },
++};
++
++static struct board_info __initdata board_spw500v = {
++      .name                           = "SPW500V",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4318,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++              .board_fixups           = spw500v_fixups,
++              .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -551,6 +581,7 @@ static const struct board_info __initcon
+       &board_96348gw_a,
+       &board_rta1025w_16,
+       &board_96348_D4PW,
++      &board_spw500v,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/506-board_gw6200_gw6000.patch b/target/linux/bcm63xx/patches-4.19/506-board_gw6200_gw6000.patch
new file mode 100644 (file)
index 0000000..77948d1
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -217,6 +217,48 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++static struct board_info __initdata board_gw6200 = {
++      .name                           = "GW6200",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++};
++
++static struct board_info __initdata board_gw6000 = {
++      .name                           = "GW6000",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+       .name                           = "F@ST2404",
+       .expected_cpu_id                = 0x6348,
+@@ -574,6 +616,8 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+       &board_96348gw,
++      &board_gw6000,
++      &board_gw6200,
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
+@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
++      { .compatible = "tecom,gw6000", .data = &board_gw6000, },
++      { .compatible = "tecom,gw6200", .data = &board_gw6200, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/507-board-MAGIC.patch b/target/linux/bcm63xx/patches-4.19/507-board-MAGIC.patch
new file mode 100644 (file)
index 0000000..3a88e01
--- /dev/null
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -396,6 +396,31 @@ static struct board_info __initdata boar
+               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
+       },
+ };
++
++static struct board_info __initdata board_96348sv = {
++      .name                           = "MAGIC",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              /* it has BP_ENET_EXTERNAL_PHY */
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++      .has_ehci0                      = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -626,6 +651,7 @@ static const struct board_info __initcon
+       &board_rta1025w_16,
+       &board_96348_D4PW,
+       &board_spw500v,
++      &board_96348sv,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
++      { .compatible = "telsey,magic", .data = &board_96348sv, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/508-board_hw553.patch b/target/linux/bcm63xx/patches-4.19/508-board_hw553.patch
new file mode 100644 (file)
index 0000000..e6e94f7
--- /dev/null
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -618,6 +618,32 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+       .num_usbh_ports                 = 2,
+ };
++
++static struct board_info __initdata board_HW553 = {
++      .name                           = "HW553",
++      .expected_cpu_id                = 0x6358,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++      .num_usbh_ports                 = 2,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -663,6 +689,7 @@ static const struct board_info __initcon
+       &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
++      &board_HW553,
+ #endif
+ };
+@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.19/509-board_rta1320_16m.patch b/target/linux/bcm63xx/patches-4.19/509-board_rta1320_16m.patch
new file mode 100644 (file)
index 0000000..cfe5555
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -112,6 +112,20 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++static struct board_info __initdata board_rta1320_16m = {
++      .name                           = "RTA1320_16M",
++      .expected_cpu_id                = 0x6338,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6338 */
+ /*
+@@ -660,6 +674,7 @@ static const struct board_info __initcon
+       &board_96338gw,
+       &board_96338w,
+       &board_96338w2_e7t,
++      &board_rta1320_16m,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
+       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
++      { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
+       { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/bcm63xx/patches-4.19/510-board_spw303v.patch b/target/linux/bcm63xx/patches-4.19/510-board_spw303v.patch
new file mode 100644 (file)
index 0000000..69432c9
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -658,6 +658,20 @@ static struct board_info __initdata boar
+               .pci_dev                        = 1,
+       },
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++      .name                   = "96358-502V",
++      .expected_cpu_id        = 0x6358,
++
++      .has_enet0              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -705,6 +719,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_HW553,
++      &board_spw303v,
+ #endif
+ };
+@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
+       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
++      { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.19/511-board_V2500V.patch b/target/linux/bcm63xx/patches-4.19/511-board_V2500V.patch
new file mode 100644 (file)
index 0000000..c77eb00
--- /dev/null
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -435,6 +435,26 @@ static struct board_info __initdata boar
+       .has_pccard                     = 1,
+       .has_ehci0                      = 1,
+ };
++
++static struct board_info __initdata board_V2500V_BB = {
++      .name                           = "V2500V_BB",
++        .expected_cpu_id                = 0x6348,
++
++        .has_enet0                      = 1,
++        .has_enet1                      = 1,
++        .has_pci                        = 1,
++
++        .enet0 = {
++                .has_phy                = 1,
++                .use_internal_phy       = 1,
++        },
++        .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++                .force_speed_100        = 1,
++                .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ /*
+@@ -707,6 +727,7 @@ static const struct board_info __initcon
+       &board_96348_D4PW,
+       &board_spw500v,
+       &board_96348sv,
++      &board_V2500V_BB,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
+               val &= MPI_CSBASE_BASE_MASK;
+       }
+       boot_addr = (u8 *)KSEG1ADDR(val);
++      pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
++
++      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
++      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
++      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
++      /* Do an early check of CFE and then select bank 0 */
++
++      if (boot_addr == (u8 *)0xbf800000) {
++              u8 *tmp_boot_addr = (u8*)0xbfc00000;
++
++              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
++              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
++                      pr_info("V2500V: nvram bank 0\n");
++                      boot_addr = tmp_boot_addr;
++              }
++      }
+       /* dump cfe version */
+       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -21,6 +21,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+ #include <bcm63xx_regs.h>
+@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
+                       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+                       val &= MPI_CSBASE_BASE_MASK;
++                      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++                      /* Loading from CFE always uses Bank 0 */
++                      if (!strcmp(board_get_name(), "V2500V_BB")) {
++                              pr_info("V2500V: Start in Bank 0\n");
++                              val = val + 0x400000; // Select Bank 0 start address
++                      }
++
+                       mtd_resources[0].start = val;
+                       mtd_resources[0].end = 0x1FFFFFFF;
+               }
diff --git a/target/linux/bcm63xx/patches-4.19/512-board_BTV2110.patch b/target/linux/bcm63xx/patches-4.19/512-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..4c14ea4
--- /dev/null
@@ -0,0 +1,43 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -208,6 +208,24 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -728,6 +746,7 @@ static const struct board_info __initcon
+       &board_spw500v,
+       &board_96348sv,
+       &board_V2500V_BB,
++      &board_V2110,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
++      { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
new file mode 100644 (file)
index 0000000..53ea56b
--- /dev/null
@@ -0,0 +1,215 @@
+From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 9 Mar 2014 04:55:52 +0100
+Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
+
+---
+ arch/mips/bcm63xx/boards/Kconfig         |    6 +
+ arch/mips/bcm63xx/boards/Makefile        |    1 +
+ arch/mips/bcm63xx/boards/board_common.c  |    2 +-
+ arch/mips/bcm63xx/boards/board_common.h  |    6 +
+ arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
+ 5 files changed, 229 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
+
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -12,4 +12,10 @@ config BOARD_BCM963XX
+       select BCMA
+       default y
++config BOARD_LIVEBOX
++      bool "Inventel Livebox(es) boards"
++      select SSB
++      help
++        Inventel Livebox boards using the RedBoot bootloader.
++
+ endmenu
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1,2 +1,3 @@
+ obj-y                                 += board_common.o
+ obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -54,7 +54,7 @@ void __init board_prom_init(void)
+       if (fw_arg3 == CFE_EPTSEAL)
+               board_bcm963xx_init();
+       else
+-              panic("unsupported bootloader detected");
++              board_livebox_init();
+ }
+ static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
+--- a/arch/mips/bcm63xx/boards/board_common.h
++++ b/arch/mips/bcm63xx/boards/board_common.h
+@@ -24,4 +24,10 @@ static inline void board_of_device_prese
+ }
+ #endif
++#if defined(CONFIG_BOARD_LIVEBOX)
++void board_livebox_init(void);
++#else
++static inline void board_livebox_init(void) { }
++#endif
++
+ #endif /* __BOARD_COMMON_H */
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,155 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/input.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_flash.h>
++#include <board_bcm963xx.h>
++
++#include "board_common.h"
++
++#define PFX   "board_livebox: "
++
++static unsigned int mac_addr_used = 0;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox_blue5g = {
++      .name                           = "Livebox-blue-5g",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++                .has_phy              = 1,
++                .phy_id               = 31,
++      },
++
++      .ephy_reset_gpio                = 6,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
++
++      .has_ohci0                      = 1,
++      .has_pccard                     = 1,
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++      &board_livebox_blue5g
++#endif
++};
++
++static struct of_device_id const livebox_boards_dt[] = {
++      { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
++      { }
++};
++
++/*
++ * register & return a new board mac address
++ */
++static int livebox_get_mac_address(u8 *mac)
++{
++      u8 *p;
++      int count;
++
++      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++      p = mac + ETH_ALEN - 1;
++      count = mac_addr_used;
++
++      while (count--) {
++              do {
++                      (*p)++;
++                      if (*p != 0)
++                              break;
++                      p--;
++              } while (p != mac);
++      }
++
++      if (p == mac) {
++              printk(KERN_ERR PFX "unable to fetch mac address\n");
++              return -ENODEV;
++      }
++        mac_addr_used++;
++
++      return 0;
++}
++
++/*
++ * early init callback
++ */
++#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
++#define LIVEBOX_BOOT_ADDR             0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9           0x90
++
++void __init board_livebox_init(void)
++{
++      u32 val;
++      u8 hw_version;
++      const struct board_info *board;
++      const struct of_device_id *board_match;
++
++      /* find board by compat */
++      board_match = bcm63xx_match_board(livebox_boards_dt);
++      if (board_match) {
++              board = board_match->data;
++      } else {
++              /* Get hardware version */
++              val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++              val &= ~LIVEBOX_GPIO_DETECT_MASK;
++              bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++              hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
++              hw_version &= LIVEBOX_GPIO_DETECT_MASK;
++
++              switch (hw_version) {
++              case LIVEBOX_HW_BLUE5G_9:
++                      printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++                      board = bcm963xx_boards[0];
++                      break;
++              default:
++                      printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
++                             hw_version);
++                      /* use default livebox configuration */
++                      board = bcm963xx_boards[0];
++                      break;
++              }
++      }
++
++      /* use default livebox configuration */
++      board_early_setup(board, livebox_get_mac_address);
++
++      /* read base address of boot chip select (0) */
++      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++      val &= MPI_CSBASE_BASE_MASK;
++      if (val != LIVEBOX_BOOT_ADDR) {
++              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++                      val, LIVEBOX_BOOT_ADDR);
++              bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
++      }
++}
diff --git a/target/linux/bcm63xx/patches-4.19/514-board_ct536_ct5621.patch b/target/linux/bcm63xx/patches-4.19/514-board_ct536_ct5621.patch
new file mode 100644 (file)
index 0000000..acb533d
--- /dev/null
@@ -0,0 +1,53 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -226,6 +226,33 @@ static struct board_info __initdata boar
+ };
++static struct board_info __initdata board_ct536_ct5621 = {
++      .name                           = "CT536_CT5621",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 0,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -747,6 +774,7 @@ static const struct board_info __initcon
+       &board_96348sv,
+       &board_V2500V_BB,
+       &board_V2110,
++      &board_ct536_ct5621,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
+       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
++      { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
++      { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/bcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch
new file mode 100644 (file)
index 0000000..9ccb29b
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -626,6 +626,7 @@ static struct board_info __initdata boar
+       },
+       .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
+ };
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/bcm63xx/patches-4.19/516-board_96348A-122.patch b/target/linux/bcm63xx/patches-4.19/516-board_96348A-122.patch
new file mode 100644 (file)
index 0000000..a6de00d
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -253,6 +253,30 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_96348A_122 = {
++      .name                           = "96348A-122",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0 = 1,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -776,6 +800,7 @@ static const struct board_info __initcon
+       &board_V2500V_BB,
+       &board_V2110,
+       &board_ct536_ct5621,
++      &board_96348A_122,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
+       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
+       { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
++      { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
+       { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/bcm63xx/patches-4.19/519_board_CPVA502plus.patch b/target/linux/bcm63xx/patches-4.19/519_board_CPVA502plus.patch
new file mode 100644 (file)
index 0000000..25e7f9f
--- /dev/null
@@ -0,0 +1,52 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -225,6 +225,33 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_CPVA502plus = {
++      .name                           = "CPVA502+",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++      },
++
++      .ephy_reset_gpio                = 4,
++      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
+ static struct board_info __initdata board_ct536_ct5621 = {
+       .name                           = "CT536_CT5621",
+@@ -801,6 +828,7 @@ static const struct board_info __initcon
+       &board_V2110,
+       &board_ct536_ct5621,
+       &board_96348A_122,
++      &board_CPVA502plus,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
++      { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
+       { .compatible = "telsey,magic", .data = &board_96348sv, },
+       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/bcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch
new file mode 100644 (file)
index 0000000..17087b3
--- /dev/null
@@ -0,0 +1,118 @@
+From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Wed, 20 Jan 2010 16:21:30 +0100
+Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
+ 2 files changed, 97 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -792,6 +792,58 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
++ * known 6368 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_96368mvwg = {
++      .name                           = "96368MVWG",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port1",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0x12,
++                              .name   = "port0",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 0x11,
++                              .name   = "port3",
++                      },
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
++#endif /* CONFIG_BCM63XX_CPU_6368 */
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -843,6 +895,10 @@ static const struct board_info __initcon
+       &board_HW553,
+       &board_spw303v,
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_6368
++      &board_96368mvwg,
++#endif
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ #endif
+--- a/arch/mips/bcm63xx/boards/board_common.c
++++ b/arch/mips/bcm63xx/boards/board_common.c
+@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
+               bcm63xx_pci_enabled = 1;
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G2_PCI;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCI_REQ1 |
++                              GPIO_MODE_6368_PCI_GNT1 |
++                              GPIO_MODE_6368_PCI_INTB |
++                              GPIO_MODE_6368_PCI_REQ0 |
++                              GPIO_MODE_6368_PCI_GNT0;
+       }
+ #endif
+       if (board.has_pccard) {
+               if (BCMCPU_IS_6348())
+                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
++
++              if (BCMCPU_IS_6368())
++                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
++                              GPIO_MODE_6368_PCMCIA_CD2 |
++                              GPIO_MODE_6368_PCMCIA_VS1 |
++                              GPIO_MODE_6368_PCMCIA_VS2;
+       }
+       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/bcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch
new file mode 100644 (file)
index 0000000..03bda96
--- /dev/null
@@ -0,0 +1,73 @@
+From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 4 Nov 2011 12:33:48 +0100
+Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
+ 1 files changed, 67 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -841,6 +841,45 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
+ };
++
++static struct board_info __initdata board_96368mvngr = {
++      .name                           = "96368MVNgr",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .has_ohci0 = 1,
++      .has_ehci0 = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
+@@ -898,6 +937,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
++      &board_96368mvngr,
+ #endif
+ };
+@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
new file mode 100644 (file)
index 0000000..e482b20
--- /dev/null
@@ -0,0 +1,45 @@
+From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 10:52:25 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
+ 1 files changed, 77 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -64,6 +64,33 @@ static struct board_info __initdata boar
+               .use_fullspeed          = 0,
+               .port_no                = 0,
+       },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
+ };
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/bcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
new file mode 100644 (file)
index 0000000..522d999
--- /dev/null
@@ -0,0 +1,68 @@
+From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 11:01:12 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
+ 1 files changed, 71 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -92,6 +92,40 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_963281TAN = {
++      .name                           = "963281TAN",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -918,6 +952,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_963281TAN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch b/target/linux/bcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch
new file mode 100644 (file)
index 0000000..b91fff0
--- /dev/null
@@ -0,0 +1,80 @@
+From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 30 Apr 2012 09:10:51 +0200
+Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
+ DSL-274xB rev F1
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
+ 1 files changed, 104 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -126,6 +126,51 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++      .name                           = "AW4339U",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor         = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset = 0x7d1000,
++                      .slot           = 0,
++                      .led_pin        = -1,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 1",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -953,6 +998,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.19/525-board_96348w3.patch b/target/linux/bcm63xx/patches-4.19/525-board_96348w3.patch
new file mode 100644 (file)
index 0000000..3a27db8
--- /dev/null
@@ -0,0 +1,43 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -568,6 +568,24 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+ };
++/* NetGear DG834G v4 */
++static struct board_info __initdata board_96348W3 = {
++      .name                           = "96348W3",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .has_ohci0                      = 1,
++};
++
+ static struct board_info __initdata board_96348_D4PW = {
+       .name                           = "D-4P-W",
+       .expected_cpu_id                = 0x6348,
+@@ -1028,6 +1046,7 @@ static const struct board_info __initcon
+       &board_ct536_ct5621,
+       &board_96348A_122,
+       &board_CPVA502plus,
++      &board_96348W3,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
++      { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/bcm63xx/patches-4.19/526-board_CT6373-1.patch b/target/linux/bcm63xx/patches-4.19/526-board_CT6373-1.patch
new file mode 100644 (file)
index 0000000..0cfcc17
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -874,6 +874,30 @@ static struct board_info __initdata boar
+       .num_usbh_ports                 = 2,
+ };
++static struct board_info __initdata board_ct6373_1 = {
++      .name                           = "CT6373-1",
++      .expected_cpu_id        = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -1058,6 +1082,7 @@ static const struct board_info __initcon
+       &board_dsl_274xb_rev_c,
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
++      &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
+ #endif
+@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
+       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
+       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
++      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/bcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch b/target/linux/bcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch
new file mode 100644 (file)
index 0000000..45e8717
--- /dev/null
@@ -0,0 +1,52 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -937,6 +937,33 @@ static struct board_info __initdata boar
+               .use_internal_phy       = 1,
+       },
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++      .name                   = "DVAG3810BN",
++      .expected_cpu_id        = 0x6358,
++
++      .has_enet0              = 1,
++      .has_enet1              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0              = 1,
++      .has_pccard             = 1,
++      .has_ehci0              = 1,
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ /*
+@@ -1085,6 +1112,7 @@ static const struct board_info __initcon
+       &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
++      &board_DVAG3810BN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++      { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.19/528-board_nb6.patch b/target/linux/bcm63xx/patches-4.19/528-board_nb6.patch
new file mode 100644 (file)
index 0000000..b4de7cb
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -966,6 +966,32 @@ static struct board_info __initdata boar
+ };
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
++#ifdef CONFIG_BCM63XX_CPU_6362
++static struct board_info __initdata board_nb6 = {
++      .name                           = "NB6",
++      .expected_cpu_id                = 0x6362,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name   = "RGMII",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_6362 */
++
+ /*
+  * known 6368 boards
+  */
+@@ -1115,6 +1141,10 @@ static const struct board_info __initcon
+       &board_DVAG3810BN,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      &board_nb6,
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
+@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x
+       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.19/529-board_fast2604.patch b/target/linux/bcm63xx/patches-4.19/529-board_fast2604.patch
new file mode 100644 (file)
index 0000000..9e42c40
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -501,6 +501,22 @@ static struct board_info __initdata boar
+       .has_ehci0                      = 1,
+ };
++static struct board_info __initdata board_FAST2604 = {
++      .name                                           = "F@ST2604",
++      .expected_cpu_id                        = 0x6348,
++
++      .has_pci                                        = 1,
++      .has_ohci0                                      = 1,
++
++      .has_enet1                                      = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
+@@ -1112,6 +1128,7 @@ static const struct board_info __initcon
+       &board_96348gw_10,
+       &board_96348gw_11,
+       &board_FAST2404,
++      &board_FAST2604,
+       &board_DV201AMR,
+       &board_96348gw_a,
+       &board_rta1025w_16,
+@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
+       { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
+       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
++      { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
+       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
+       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/bcm63xx/patches-4.19/530-board_A4001N1.patch b/target/linux/bcm63xx/patches-4.19/530-board_A4001N1.patch
new file mode 100644 (file)
index 0000000..0cecd9c
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -127,6 +127,49 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_A4001N1 = {
++      .name                                   = "963281T_TEF",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ static struct board_info __initdata board_dsl_274xb_f1 = {
+       .name                           = "AW4339U",
+       .expected_cpu_id                = 0x6328,
+@@ -1109,6 +1152,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_963281TAN,
++      &board_A4001N1,
+       &board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/bcm63xx/patches-4.19/531-board_AR-5387un.patch b/target/linux/bcm63xx/patches-4.19/531-board_AR-5387un.patch
new file mode 100644 (file)
index 0000000..f2af2c5
--- /dev/null
@@ -0,0 +1,97 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -93,6 +93,78 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5387un_fixups[] = {
++      { .offset = 2, .value = 0x05bb },
++      { .offset = 65, .value = 0x1204 },
++      { .offset = 78, .value = 0x0303 },
++      { .offset = 79, .value = 0x0202 },
++      { .offset = 80, .value = 0xff02 },
++      { .offset = 87, .value = 0x0315 },
++      { .offset = 88, .value = 0x0315 },
++      { .offset = 96, .value = 0x2048 },
++      { .offset = 97, .value = 0xff11 },
++      { .offset = 98, .value = 0x1567 },
++      { .offset = 99, .value = 0xfb24 },
++      { .offset = 100, .value = 0x3e3c },
++      { .offset = 101, .value = 0x4038 },
++      { .offset = 102, .value = 0xfe7f },
++      { .offset = 103, .value = 0x1279 },
++      { .offset = 112, .value = 0x2048 },
++      { .offset = 113, .value = 0xff03 },
++      { .offset = 114, .value = 0x154c },
++      { .offset = 115, .value = 0xfb27 },
++      { .offset = 116, .value = 0x3e3c },
++      { .offset = 117, .value = 0x4038 },
++      { .offset = 118, .value = 0xfe87 },
++      { .offset = 119, .value = 0x1233 },
++      { .offset = 203, .value = 0x2226 },
++};
++
++static struct board_info __initdata board_AR5387un = {
++      .name                                   = "96328A-1441N1",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5387un_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5387un_fixups),
++      },
++};
++
+ static struct board_info __initdata board_963281TAN = {
+       .name                           = "963281TAN",
+       .expected_cpu_id                = 0x6328,
+@@ -1151,6 +1223,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AR5387un,
+       &board_963281TAN,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.19/532-board_AR-5381u.patch b/target/linux/bcm63xx/patches-4.19/532-board_AR-5381u.patch
new file mode 100644 (file)
index 0000000..dc8efed
--- /dev/null
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -93,6 +93,60 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5381u_fixups[] = {
++      { .offset = 97, .value = 0xfee5 },
++      { .offset = 98, .value = 0x157c },
++      { .offset = 99, .value = 0xfae7 },
++      { .offset = 113, .value = 0xfefa },
++      { .offset = 114, .value = 0x15d6 },
++      { .offset = 115, .value = 0xfaf8 },
++};
++
++static struct board_info __initdata board_AR5381u = {
++      .name                                   = "96328A-1241N",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5381u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5387un_fixups[] = {
+       { .offset = 2, .value = 0x05bb },
+       { .offset = 65, .value = 0x1204 },
+@@ -1223,6 +1277,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+       &board_A4001N1,
+@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/533-board_rta770bw.patch b/target/linux/bcm63xx/patches-4.19/533-board_rta770bw.patch
new file mode 100644 (file)
index 0000000..d56df55
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -411,6 +411,20 @@ static struct board_info __initdata boar
+       .name                           = "96345GW2",
+       .expected_cpu_id                = 0x6345,
+ };
++
++static struct board_info __initdata board_rta770bw = {
++      .name                           = "RTA770BW",
++      .expected_cpu_id                = 0x6345,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+@@ -1291,6 +1305,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
++      &board_rta770bw,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
++      { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.19/534-board_hw556.patch b/target/linux/bcm63xx/patches-4.19/534-board_hw556.patch
new file mode 100644 (file)
index 0000000..cf55255
--- /dev/null
@@ -0,0 +1,123 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,6 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
++#include <linux/pci_ids.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HW556_C = {
++      .name                                   = "HW556_C",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0xeffe00,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++static struct board_info __initdata board_HW556_A = {
++      .name                                   = "HW556_A",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xf7e000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++static struct board_info __initdata board_HW556_B = {
++      .name                                   = "HW556_B",
++      .expected_cpu_id                        = 0x6358,
++
++      .has_pci                                = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 2,
++
++      .has_caldata                            = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
++                      .caldata_offset         = 0xefe000,
++                      .slot                   = 1,
++                      .endian_check           = 1,
++                      .led_pin                = 2,
++                      .led_active_high        = 1,
++              },
++      },
++
++      .has_enet1                              = 1,
++      .enet1 = {
++              .has_phy                        = 1,
++              .phy_id                         = 0,
++              .force_speed_100                = 1,
++              .force_duplex_full              = 1,
++      },
++};
++
+  /* T-Home Speedport W 303V Typ B */
+ static struct board_info __initdata board_spw303v = {
+       .name                   = "96358-502V",
+@@ -1341,6 +1428,9 @@ static const struct board_info __initcon
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
+       &board_HW553,
++      &board_HW556_A,
++      &board_HW556_B,
++      &board_HW556_C,
+       &board_spw303v,
+       &board_DVAG3810BN,
+ #endif
+@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
++      { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
++      { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
++      { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
+       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
+       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/bcm63xx/patches-4.19/535-board_rta770w.patch b/target/linux/bcm63xx/patches-4.19/535-board_rta770w.patch
new file mode 100644 (file)
index 0000000..c78e59e
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -426,6 +426,25 @@ static struct board_info __initdata boar
+               .force_duplex_full      = 1,
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ /*
+@@ -1393,6 +1412,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,
+@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
+       { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
++      { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.19/536-board_fast2704.patch b/target/linux/bcm63xx/patches-4.19/536-board_fast2704.patch
new file mode 100644 (file)
index 0000000..358e974
--- /dev/null
@@ -0,0 +1,74 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -341,6 +341,43 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_FAST2704V2 = {
++      .name                           = "F@ST2704V2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .has_usbd                       = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -1402,6 +1439,7 @@ static const struct board_info __initcon
+       &board_963281TAN,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
++      &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
++      { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.19/537-board_fast2504n.patch b/target/linux/bcm63xx/patches-4.19/537-board_fast2504n.patch
new file mode 100644 (file)
index 0000000..ff04407
--- /dev/null
@@ -0,0 +1,66 @@
+From: Max Staudt <openwrt.max@enpas.org>
+Date: Wed, 15 Jan 2014 18:51:13 +0000
+Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26)
+
+Signed-off-by: Max Staudt <openwrt.max@enpas.org>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_fast2504n = {
++      .name                           = "F@ST2504n",
++      .expected_cpu_id                = 0x6362,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6362 */
+ /*
+@@ -1495,6 +1530,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       &board_nb6,
++      &board_fast2504n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
++      { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/bcm63xx/patches-4.19/555-board_96318ref.patch b/target/linux/bcm63xx/patches-4.19/555-board_96318ref.patch
new file mode 100644 (file)
index 0000000..c9c532d
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -50,6 +50,55 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_3368 */
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++      .name                           = "96318REF",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_6318 */
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -1467,6 +1516,9 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       &board_cvg834g,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      &board_96318ref,
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+       &board_AR5381u,
+@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_3368
+       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++      { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
diff --git a/target/linux/bcm63xx/patches-4.19/556-board_96318ref_p300.patch b/target/linux/bcm63xx/patches-4.19/556-board_96318ref_p300.patch
new file mode 100644 (file)
index 0000000..f4ff4fd
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -96,6 +96,50 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_96318ref_p300 = {
++      .name                           = "96318REF_P300",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -1518,6 +1562,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
++      &board_96318ref_p300,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
++      { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
diff --git a/target/linux/bcm63xx/patches-4.19/557-board_bcm963269bhr.patch b/target/linux/bcm63xx/patches-4.19/557-board_bcm963269bhr.patch
new file mode 100644 (file)
index 0000000..d5af2f0
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++      .name                           = "963269BHR",
++      .expected_cpu_id                = 0x63268,
++
++      .has_pci                        = 1,
++
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++};
++#endif /* CONFIG_BCM63XX_CPU_63268 */
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -1634,6 +1678,9 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963269bhr,
++#endif
+ };
+ static struct of_device_id const bcm963xx_boards_dt[] = {
+@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.19/558-board_AR1004G.patch b/target/linux/bcm63xx/patches-4.19/558-board_AR1004G.patch
new file mode 100644 (file)
index 0000000..85521b4
--- /dev/null
@@ -0,0 +1,48 @@
+From: "mexit@o2.pl" <mexit@o2.pl>
+Date: Sun, 24 Nov 2013 21:33:38 +0000
+Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router
+
+Support for Asmax AR 1004g router
+
+Signed-off-by: Adrian Feliks <mexit@o2.pl>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -647,6 +647,21 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++      .name                           = "AR1004G",
++      .expected_cpu_id                = 0x6348,
++
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++      
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++};
++
+ /* BT Voyager 2110 */
+ static struct board_info __initdata board_V2110 = {
+@@ -1649,6 +1664,7 @@ static const struct board_info __initcon
+       &board_96348A_122,
+       &board_CPVA502plus,
+       &board_96348W3,
++      &board_96348gw_10_AR1004G,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
++      { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
+       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
+       { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
+       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/bcm63xx/patches-4.19/559-board_vw6339gu.patch b/target/linux/bcm63xx/patches-4.19/559-board_vw6339gu.patch
new file mode 100644 (file)
index 0000000..355bdb2
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_vw6339gu = {
++      .name                           = "VW6339GU",
++      .expected_cpu_id                = 0x63268,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN2",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN4",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 7,
++                              .name   = "WAN",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ /*
+@@ -1696,6 +1741,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963269bhr,
++      &board_vw6339gu,
+ #endif
+ };
+@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
++      { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.19/560-board_963268gu_p300.patch b/target/linux/bcm63xx/patches-4.19/560-board_963268gu_p300.patch
new file mode 100644 (file)
index 0000000..b8a2af4
--- /dev/null
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar
+  * known 63268/63269 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++      .name                           = "963268BU_P300",
++      .expected_cpu_id                = 0x63268,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_usbd                       = 1,
++
++      .usbd = {
++              .use_fullspeed          = 0,
++              .port_no                = 0,
++      },
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 17,
++                              .name   = "FE1",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "GbE2",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 0,
++                              .name   = "GbE3",
++                      },
++
++                      [5] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "GbE1",
++                      },
++
++                      [6] = {
++                              .used   = 1,
++                              .phy_id = 24,
++                              .name   = "GbE4",
++                      },
++
++                      [7] = {
++                              .used   = 1,
++                              .phy_id = 25,
++                              .name   = "GbE5",
++                      },
++              },
++      },
++};
++
+ static struct board_info __initdata board_963269bhr = {
+       .name                           = "963269BHR",
+       .expected_cpu_id                = 0x63268,
+@@ -1740,6 +1798,7 @@ static const struct board_info __initcon
+       &board_96368mvngr,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      &board_963268bu_p300,
+       &board_963269bhr,
+       &board_vw6339gu,
+ #endif
+@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++      { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/561-board_WAP-5813n.patch b/target/linux/bcm63xx/patches-4.19/561-board_WAP-5813n.patch
new file mode 100644 (file)
index 0000000..8b8b1ed
--- /dev/null
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -13,6 +13,8 @@
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/pci_ids.h>
++#include <linux/platform_data/b53.h>
++#include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar
+       .has_ohci0 = 1,
+       .has_ehci0 = 1,
+ };
++
++static struct sprom_fixup __initdata wap5813n_fixups[] = {
++      { .offset = 97, .value = 0xfeed },
++      { .offset = 98, .value = 0x15d1 },
++      { .offset = 99, .value = 0xfb0d },
++      { .offset = 113, .value = 0xfef7 },
++      { .offset = 114, .value = 0x15f7 },
++      { .offset = 115, .value = 0xfb1a },
++};
++
++static struct board_info __initdata board_WAP5813n = {
++      .name                           = "96369R-1231N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [4] = {
++                              .used = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name = "RGMII",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = wap5813n_fixups,
++              .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6368 */
+ /*
+@@ -1796,6 +1839,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963268bu_p300,
+@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++      { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.19/562-board_VR-3025u.patch b/target/linux/bcm63xx/patches-4.19/562-board_VR-3025u.patch
new file mode 100644 (file)
index 0000000..36014ea
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct sprom_fixup __initdata vr3025u_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025u = {
++      .name                                   = "96368M-1541N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3025u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -1839,6 +1892,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_VR3025u,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
++      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/563-board_VR-3025un.patch b/target/linux/bcm63xx/patches-4.19/563-board_VR-3025un.patch
new file mode 100644 (file)
index 0000000..a34b7a1
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vr3025un_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3025un = {
++      .name                                   = "96368M-1341N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3025un_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -1893,6 +1946,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_VR3025u,
++      &board_VR3025un,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
++      { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch b/target/linux/bcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch
new file mode 100644 (file)
index 0000000..9e06802
--- /dev/null
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3
+       { .offset = 115, .value = 0xfad9 },
+ };
++static struct board_info __initdata board_P870HW51A_V2 = {
++      .name                           = "P870HW-51a_v2",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+       .name                                   = "96368M-1541N",
+       .expected_cpu_id                = 0x6368,
+@@ -1945,6 +1987,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+       &board_WAP5813n,
+@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/bcm63xx/patches-4.19/565-board_hw520.patch b/target/linux/bcm63xx/patches-4.19/565-board_hw520.patch
new file mode 100644 (file)
index 0000000..517df7d
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HW520 = {
++      .name                           = "HW6358GW_B",
++      .expected_cpu_id                = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enet0                      = 1,
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM4318,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW553 = {
+       .name                           = "HW553",
+       .expected_cpu_id                = 0x6358,
+@@ -1971,6 +2001,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
++      &board_HW520,
+       &board_HW553,
+       &board_HW556_A,
+       &board_HW556_B,
+@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
+       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
++      { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
+       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
+       { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
+       { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/bcm63xx/patches-4.19/566-board_A4001N.patch b/target/linux/bcm63xx/patches-4.19/566-board_A4001N.patch
new file mode 100644 (file)
index 0000000..2dc61d5
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -349,6 +349,49 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_A4001N = {
++      .name                           = "96328dg2x2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43225,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ static struct board_info __initdata board_A4001N1 = {
+       .name                                   = "963281T_TEF",
+       .expected_cpu_id                        = 0x6328,
+@@ -1952,6 +1995,7 @@ static const struct board_info __initcon
+       &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
++      &board_A4001N,
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+       &board_FAST2704V2,
+@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++      { .compatible = "adb,a4001n", .data = &board_A4001N, },
+       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch
new file mode 100644 (file)
index 0000000..b7e155d
--- /dev/null
@@ -0,0 +1,93 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -142,6 +142,74 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe9d },
++      { .offset = 98, .value = 0x1854 },
++      { .offset = 99, .value = 0xfa59 },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfe79 },
++      { .offset = 114, .value = 0x17f5 },
++      { .offset = 115, .value = 0xfa47 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 162, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 170, .value = 0x2222 },
++      { .offset = 171, .value = 0x5555 },
++      { .offset = 172, .value = 0x5555 },
++      { .offset = 173, .value = 0x4444 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x5555 },
++      { .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++      .name                           = "AW5200B",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = dsl2751b_e1_fixups,
++              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_dsl_2751b_d1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++      { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch b/target/linux/bcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch
new file mode 100644 (file)
index 0000000..29263bc
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar
+       .has_ehci0 = 1,
+ };
++static struct board_info __initdata board_DGND3700v1_3800B = {
++      .name                           = "DGND3700v1_3800B",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used  = 1,
++                              .phy_id  = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name  = "RGMII",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2131,6 +2155,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       &board_96368mvwg,
+       &board_96368mvngr,
++      &board_DGND3700v1_3800B,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/569-board_homehub2a.patch b/target/linux/bcm63xx/patches-4.19/569-board_homehub2a.patch
new file mode 100644 (file)
index 0000000..9909994
--- /dev/null
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_homehub2a = {
++      .name                           = "HOMEHUB2A",
++      .expected_cpu_id                = 0x6358,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enet1                      = 1,
++      .enet1 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4322,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++      },
++};
++
+ static struct board_info __initdata board_HW520 = {
+       .name                           = "HW6358GW_B",
+       .expected_cpu_id                = 0x6358,
+@@ -2138,6 +2163,7 @@ static const struct board_info __initcon
+       &board_nb4_ser_r0,
+       &board_nb4_fxc_r1,
+       &board_ct6373_1,
++      &board_homehub2a,
+       &board_HW520,
+       &board_HW553,
+       &board_HW556_A,
+@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
+       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
+       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
++      { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
diff --git a/target/linux/bcm63xx/patches-4.19/570-board_HG655b.patch b/target/linux/bcm63xx/patches-4.19/570-board_HG655b.patch
new file mode 100644 (file)
index 0000000..7b4d1fc
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HG655b = {
++      .name                           = "HW65x",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0x7c0000,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2182,6 +2228,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_HG655b,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/571-board_fast2704n.patch b/target/linux/bcm63xx/patches-4.19/571-board_fast2704n.patch
new file mode 100644 (file)
index 0000000..fb84d8d
--- /dev/null
@@ -0,0 +1,64 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -210,6 +210,45 @@ static struct board_info __initdata boar
+               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
+       },
+ };
++
++static struct board_info __initdata board_FAST2704N = {
++      .name                           = "F@ST2704N",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ /*
+@@ -2153,6 +2192,7 @@ static const struct board_info __initcon
+       &board_96318ref,
+       &board_96318ref_p300,
+       &board_dsl_2751b_d1,
++      &board_FAST2704N,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
+@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
+       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
++      { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/bcm63xx/patches-4.19/572-board_VR-3026e.patch b/target/linux/bcm63xx/patches-4.19/572-board_VR-3026e.patch
new file mode 100644 (file)
index 0000000..dec8adf
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++      { .offset = 97, .value = 0xfeb3 },
++      { .offset = 98, .value = 0x1618 },
++      { .offset = 99, .value = 0xfab0 },
++      { .offset = 113, .value = 0xfed1 },
++      { .offset = 114, .value = 0x1609 },
++      { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++      .name                                   = "96368MT-1341N1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++
++      .has_enetsw                             = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vr3026e_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -2272,6 +2325,7 @@ static const struct board_info __initcon
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+       &board_VR3025un,
++      &board_VR3026e,
+       &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/bcm63xx/patches-4.19/573-board_R5010UNv2.patch b/target/linux/bcm63xx/patches-4.19/573-board_R5010UNv2.patch
new file mode 100644 (file)
index 0000000..ab3e6fe
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -623,6 +623,50 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_R5010UNV2 = {
++      .name                                   = "96328ang",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "Port 1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "Port 2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "Port 3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "Port 4",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++      },
++};
++
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ /*
+@@ -2256,6 +2300,7 @@ static const struct board_info __initcon
+       &board_A4001N1,
+       &board_dsl_274xb_f1,
+       &board_FAST2704V2,
++      &board_R5010UNV2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
+@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
++      { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
+       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/bcm63xx/patches-4.19/574-board_HG622.patch b/target/linux/bcm63xx/patches-4.19/574-board_HG622.patch
new file mode 100644 (file)
index 0000000..3a14751
--- /dev/null
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_HG622 = {
++      .name                           = "96368MVWG_hg622",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_caldata                    = 1,
++      .caldata = {
++              {
++                      .vendor                 = PCI_VENDOR_ID_RALINK,
++                      .caldata_offset         = 0xfa0000,
++                      .slot                   = 1,
++                      .eeprom                 = "rt2x00.eeprom",
++              },
++      },
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "port1",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "port2",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "port3",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "port4",
++                      },
++              },
++      },
++};
++
+ static struct sprom_fixup __initdata vr3025u_fixups[] = {
+       { .offset = 97, .value = 0xfeb3 },
+       { .offset = 98, .value = 0x1618 },
+@@ -2366,6 +2412,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
+       &board_VR3025u,
+@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+       { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
++      { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/bcm63xx/patches-4.19/575-board_EVG2000.patch b/target/linux/bcm63xx/patches-4.19/575-board_EVG2000.patch
new file mode 100644 (file)
index 0000000..1619376
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata EVG2000_fixups[] = {
++  { .offset = 219, .value = 0xec08 },
++};
++
++static struct board_info __initdata board_EVG2000 = {
++      .name                           = "96369PVG",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used = 1,
++                              .phy_id = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name = "RGMII",
++                      },
++              },
++      },
++      .use_fallback_sprom     = 1,
++      .fallback_sprom = {
++              .type                   = SPROM_BCM4322,
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++              .board_fixups           = EVG2000_fixups,
++              .num_board_fixups       = ARRAY_SIZE(EVG2000_fixups),
++      },
++};
++
+ static struct board_info __initdata board_HG655b = {
+       .name                           = "HW65x",
+       .expected_cpu_id                = 0x6368,
+@@ -2412,6 +2448,7 @@ static const struct board_info __initcon
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
++      &board_EVG2000,
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
+@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
++      { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/576-board_AV4202N.patch b/target/linux/bcm63xx/patches-4.19/576-board_AV4202N.patch
new file mode 100644 (file)
index 0000000..c61fcdd
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar
+  * known 6368 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_AV4202N = {
++      .name                           = "96368_Swiss_S1",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++      .use_fallback_sprom     = 1,
++      .fallback_sprom = {
++              .pci_bus                = 0,
++              .pci_dev                = 1,
++      },
++
++};
++
+ static struct board_info __initdata board_96368mvwg = {
+       .name                           = "96368MVWG",
+       .expected_cpu_id                = 0x6368,
+@@ -2445,6 +2490,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      &board_AV4202N,
+       &board_96368mvwg,
+       &board_96368mvngr,
+       &board_DGND3700v1_3800B,
+@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "adb,av4202n", .data = &board_AV4202N, },
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/bcm63xx/patches-4.19/577-board_VH4032N.patch b/target/linux/bcm63xx/patches-4.19/577-board_VH4032N.patch
new file mode 100644 (file)
index 0000000..baed99c
--- /dev/null
@@ -0,0 +1,125 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata vh4032n_fixups[] = {
++      { .offset = 2, .value = 0x04d2 },
++      { .offset = 4, .value = 0x4350 },
++      { .offset = 65, .value = 0x1300 },
++      { .offset = 68, .value = 0x0402 },
++      { .offset = 70, .value = 0x0090 },
++      { .offset = 71, .value = 0x4c19 },
++      { .offset = 72, .value = 0x2345 },
++      { .offset = 87, .value = 0x0315 },
++      { .offset = 88, .value = 0x0315 },
++      { .offset = 96, .value = 0x2048 },
++      { .offset = 97, .value = 0xfed7 },
++      { .offset = 98, .value = 0x15a6 },
++      { .offset = 99, .value = 0xfaee },
++      { .offset = 100, .value = 0x3e3a },
++      { .offset = 101, .value = 0x3a36 },
++      { .offset = 102, .value = 0xff7f },
++      { .offset = 103, .value = 0x11b9 },
++      { .offset = 104, .value = 0xfc53 },
++      { .offset = 105, .value = 0xffe6 },
++      { .offset = 106, .value = 0xfdd2 },
++      { .offset = 107, .value = 0xfe49 },
++      { .offset = 108, .value = 0xff6a },
++      { .offset = 109, .value = 0x136e },
++      { .offset = 110, .value = 0xfbed },
++      { .offset = 111, .value = 0x0000 },
++      { .offset = 112, .value = 0x2048 },
++      { .offset = 113, .value = 0xfee2 },
++      { .offset = 114, .value = 0x15e5 },
++      { .offset = 115, .value = 0xfaed },
++      { .offset = 116, .value = 0x3e3a },
++      { .offset = 117, .value = 0x3a36 },
++      { .offset = 118, .value = 0xffc8 },
++      { .offset = 119, .value = 0x12b8 },
++      { .offset = 120, .value = 0xfca1 },
++      { .offset = 121, .value = 0xff9b },
++      { .offset = 122, .value = 0x122a },
++      { .offset = 123, .value = 0xfcc8 },
++      { .offset = 124, .value = 0xff95 },
++      { .offset = 125, .value = 0x146b },
++      { .offset = 126, .value = 0xfbba },
++      { .offset = 127, .value = 0x0000 },
++      { .offset = 161, .value = 0x0000 },
++      { .offset = 162, .value = 0x0000 },
++      { .offset = 169, .value = 0x0000 },
++      { .offset = 170, .value = 0x0000 },
++      { .offset = 171, .value = 0x0000 },
++      { .offset = 172, .value = 0x0000 },
++      { .offset = 173, .value = 0x0000 },
++      { .offset = 174, .value = 0x0000 },
++      { .offset = 175, .value = 0x0000 },
++      { .offset = 176, .value = 0x0000 },
++      { .offset = 219, .value = 0x1108 },
++};
++
++static struct board_info __initdata board_VH4032N = {
++      .name                           = "VH4032N",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43222,
++              .pci_bus                        = 0,
++              .pci_dev                        = 1,
++              .board_fixups                   = vh4032n_fixups,
++              .num_board_fixups               = ARRAY_SIZE(vh4032n_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata wap5813n_fixups[] = {
+       { .offset = 97, .value = 0xfeed },
+       { .offset = 98, .value = 0x15d1 },
+@@ -2498,6 +2598,7 @@ static const struct board_info __initcon
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
++      &board_VH4032N,
+       &board_VR3025u,
+       &board_VR3025un,
+       &board_VR3026e,
+@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
+       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
+       { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
++      { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
+       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/bcm63xx/patches-4.19/578-board_R1000H.patch b/target/linux/bcm63xx/patches-4.19/578-board_R1000H.patch
new file mode 100644 (file)
index 0000000..f2b2e1e
--- /dev/null
@@ -0,0 +1,48 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar
+       },
+ };
++static struct board_info __initdata board_R1000H = {
++      .name                           = "R1000H",
++      .expected_cpu_id                = 0x6368,
++
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++
++      .has_enetsw                     = 1,
++      .enetsw = {
++              .used_ports = {
++                      [5] = {
++                              .used  = 1,
++                              .phy_id  = 0xff,
++                              .bypass_link = 1,
++                              .force_speed = 1000,
++                              .force_duplex_full = 1,
++                              .name  = "RGMII",
++                      },
++              },
++      },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+       .name                                   = "96368M-1541N",
+       .expected_cpu_id                = 0x6368,
+@@ -2598,6 +2621,7 @@ static const struct board_info __initcon
+       &board_HG622,
+       &board_HG655b,
+       &board_P870HW51A_V2,
++      &board_R1000H,
+       &board_VH4032N,
+       &board_VR3025u,
+       &board_VR3025un,
+@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++      { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
+       { .compatible = "adb,av4202n", .data = &board_AV4202N, },
+       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/bcm63xx/patches-4.19/579-board_AR-5315u.patch b/target/linux/bcm63xx/patches-4.19/579-board_AR-5315u.patch
new file mode 100644 (file)
index 0000000..0393d46
--- /dev/null
@@ -0,0 +1,86 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -143,6 +143,67 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5315u_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1255 },
++      { .offset = 97, .value = 0xfe55 },
++      { .offset = 98, .value = 0x171d },
++      { .offset = 99, .value = 0xfa42 },
++      { .offset = 113, .value = 0xfeb7 },
++      { .offset = 114, .value = 0x18cd },
++      { .offset = 115, .value = 0xfa4f },
++      { .offset = 162, .value = 0x6444 },
++      { .offset = 170, .value = 0x6444 },
++      { .offset = 172, .value = 0x6444 },
++};
++
++static struct board_info __initdata board_AR5315u = {
++      .name                           = "96318A-1441N1",
++      .expected_cpu_id                = 0x6318,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5315u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
+       { .offset = 96, .value = 0x2046 },
+       { .offset = 97, .value = 0xfe9d },
+@@ -2538,6 +2599,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_AR5315u,
+       &board_dsl_2751b_d1,
+       &board_FAST2704N,
+ #endif
+@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
+       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
+       { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
+ #endif
diff --git a/target/linux/bcm63xx/patches-4.19/580-board_AD1018.patch b/target/linux/bcm63xx/patches-4.19/580-board_AD1018.patch
new file mode 100644 (file)
index 0000000..a48ecf9
--- /dev/null
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -357,6 +357,73 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ad1018_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1256 },
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe69 },
++      { .offset = 98, .value = 0x1726 },
++      { .offset = 99, .value = 0xfa5c },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfea8 },
++      { .offset = 114, .value = 0x1978 },
++      { .offset = 115, .value = 0xfa26 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 171, .value = 0x2222 },
++      { .offset = 173, .value = 0x2222 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x2222 },
++      { .offset = 176, .value = 0x4444 },
++};
++
++static struct board_info __initdata board_AD1018 = {
++      .name                                   = "96328avngr",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "FIBRE",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "LAN3",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "LAN2",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ad1018_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5381u_fixups[] = {
+       { .offset = 97, .value = 0xfee5 },
+       { .offset = 98, .value = 0x157c },
+@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AD1018,
+       &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+       { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
+       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
++      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/bcm63xx/patches-4.19/598-board_sr102.patch b/target/linux/bcm63xx/patches-4.19/598-board_sr102.patch
new file mode 100644 (file)
index 0000000..c8db6c1
--- /dev/null
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_BSKYB_63168 = {
++      .name                           = "BSKYB_63168",
++      .expected_cpu_id                = 0x63268,
++
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 0,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 2,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++
++              },
++      },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ /*
+@@ -2762,6 +2805,7 @@ static const struct board_info __initcon
+       &board_963268bu_p300,
+       &board_963269bhr,
+       &board_vw6339gu,
++      &board_BSKYB_63168,
+ #endif
+ };
+@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++      { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
+       { },
diff --git a/target/linux/bcm63xx/patches-4.19/800-wl_exports.patch b/target/linux/bcm63xx/patches-4.19/800-wl_exports.patch
new file mode 100644 (file)
index 0000000..a2f1f26
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/nvram.c
++++ b/arch/mips/bcm63xx/nvram.c
+@@ -24,6 +24,12 @@
+ static struct bcm963xx_nvram nvram;
+ static int mac_addr_used;
++/*
++ * Required export for WL
++ */
++u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
++EXPORT_SYMBOL(nvram_buf);
++
+ void __init bcm63xx_nvram_init(void *addr)
+ {
+       u32 crc, expected_crc;
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/bcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch b/target/linux/bcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch
new file mode 100644 (file)
index 0000000..11a8353
--- /dev/null
@@ -0,0 +1,31 @@
+--- a/arch/mips/bcm63xx/sprom.c
++++ b/arch/mips/bcm63xx/sprom.c
+@@ -8,6 +8,7 @@
+  */
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+@@ -387,7 +388,19 @@ struct fallback_sprom_match {
+       struct ssb_sprom sprom;
+ };
+-static struct fallback_sprom_match fallback_sprom;
++struct fallback_sprom_match fallback_sprom;
++
++int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
++{
++      if (pci_bus != fallback_sprom.pci_bus ||
++          pci_slot != fallback_sprom.pci_dev)
++              pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
++                      fallback_sprom.pci_bus, fallback_sprom.pci_dev,
++                      pci_bus, pci_slot);
++      memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
++      return 0;
++}
++EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
+ #if defined(CONFIG_SSB_PCIHOST)
+ int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/bcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch b/target/linux/bcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch
new file mode 100644 (file)
index 0000000..2aca2f3
--- /dev/null
@@ -0,0 +1,30 @@
+From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
+From: Miguel GAIO <miguel.gaio@efixo.com>
+Date: Fri, 6 Jul 2012 14:12:33 +0200
+Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
+
+---
+ drivers/net/phy/rtl8367.c  |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/phy/rtl8367.c
++++ b/drivers/net/phy/rtl8367.c
+@@ -146,6 +146,10 @@
+ #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
+ #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
++#define RTL8367_PHY_AD_REG                    0x130f
++#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
++#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
++
+ #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
+ #define   RTL8367_DI_FORCE_MODE                       BIT(12)
+ #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
+@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
+       case RTL8367_EXTIF_MODE_RGMII_33V:
+               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
+               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
++              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
+               break;
+       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/bcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/bcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
new file mode 100644 (file)
index 0000000..7a3c2f0
--- /dev/null
@@ -0,0 +1,26 @@
+From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 6 Apr 2014 22:33:16 +0200
+Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
+
+Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
+it by ensuring we are always doing aligned copies.
+
+Should fix filename corruption in jffs2 with SMP.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ fs/jffs2/nodelist.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/fs/jffs2/nodelist.h
++++ b/fs/jffs2/nodelist.h
+@@ -259,7 +259,7 @@ struct jffs2_full_dirent
+       uint32_t ino; /* == zero for unlink */
+       unsigned int nhash;
+       unsigned char type;
+-      unsigned char name[0];
++      unsigned char name[0] __attribute__((aligned((sizeof(long)))));
+ };
+ /*
diff --git a/target/linux/bcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/bcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch
new file mode 100644 (file)
index 0000000..683221d
--- /dev/null
@@ -0,0 +1,13 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2232,6 +2232,10 @@ static int bcm_enetsw_open(struct net_de
+               rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
+               rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++              if (BCMCPU_IS_63268()) {
++                      rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
++                      rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
++              }
+               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+       }
diff --git a/target/linux/bcm63xx/profiles/default.mk b/target/linux/bcm63xx/profiles/default.mk
new file mode 100644 (file)
index 0000000..95cd67c
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2016 LEDE project
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+  NAME:=Default Profile
+  PACKAGES:=kmod-b43 wpad-basic
+  PRIORITY:=1
+endef
+
+define Profile/Default/description
+  Package set compatible with most boards.
+endef
+
+$(eval $(call Profile,Default))
diff --git a/target/linux/bcm63xx/smp/config-default b/target/linux/bcm63xx/smp/config-default
new file mode 100644 (file)
index 0000000..935e97f
--- /dev/null
@@ -0,0 +1,17 @@
+CONFIG_CPU_RMAP=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_TREE_RCU=y
+CONFIG_XPS=y
diff --git a/target/linux/bcm63xx/smp/target.mk b/target/linux/bcm63xx/smp/target.mk
new file mode 100644 (file)
index 0000000..b0ccf97
--- /dev/null
@@ -0,0 +1,8 @@
+BOARDNAME:=smp
+
+define Target/Description
+       Build firmware images for BCM63XX boards with SMP support.
+       Currently only BCM6362 and BCM6368 supported.
+endef
+
+
diff --git a/target/linux/brcm63xx/Makefile b/target/linux/brcm63xx/Makefile
deleted file mode 100644 (file)
index 2d31b66..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright (C) 2006-2019 OpenWrt.org
-# Copyright (C) 2016 LEDE project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=brcm63xx
-BOARDNAME:=Broadcom BCM63xx
-SUBTARGETS:=generic smp
-FEATURES:=squashfs usb atm pci pcmcia usbgadget
-KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER:=4.19
-MAINTAINER:=Jonas Gorski <jogo@openwrt.org>
-
-define Target/Description
-       Build firmware images for Broadcom based xDSL/routers
-       currently supports BCM6338, BCM6348 and BCM6358 based devices.
-       (e.g. Inventel Livebox, Siemens SE515, Neufbox 4)
-endef
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += swconfig kmod-gpio-button-hotplug
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds b/target/linux/brcm63xx/base-files/etc/board.d/01_leds
deleted file mode 100755 (executable)
index dd1c565..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
-actiontec,r1000h)
-       ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1"
-       ;;
-adb,a4001n)
-       ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
-       ;;
-adb,a4001n1)
-       ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0"
-       ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1"
-       ;;
-adb,av4202n)
-       ucidef_set_led_netdev "wlan0" "WLAN" "AV4202N:blue:wifi" "wlan0"
-       ;;
-bt,home-hub-2-a)
-       ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
-       ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
-       ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
-       ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
-       ;;
-comtrend,ar-5315u)
-       ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1"
-       ;;
-huawei,echolife-hg553)
-       ucidef_set_led_netdev "lan" "LAN" "HW553:blue:lan" "eth0"
-       ucidef_set_led_usbdev "usb1" "USB1" "HW553:red:hspa" "1-1"
-       ucidef_set_led_usbdev "usb2" "USB2" "HW553:blue:hspa" "1-2"
-       ;;
-huawei,echolife-hg556a-a|\
-huawei,echolife-hg556a-b|\
-huawei,echolife-hg556a-c)
-       ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
-       ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
-       ;;
-huawei,echolife-hg622)
-       ucidef_set_led_usbdev "usb" "USB" "HG622:green:usb" "1-2"
-       ;;
-huawei,echolife-hg655b)
-       ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
-       ;;
-inventel,livebox-1)
-       ucidef_set_led_netdev "lan" "LAN" "Livebox1:red:traffic" "eth0"
-       ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
-       ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
-       ;;
-netgear,dgnd3700-v1)
-       ucidef_set_led_netdev "lan" "LAN" "DGND3700v1_3800B:green:lan" "eth0.1"
-       ucidef_set_led_netdev "wan" "WAN" "DGND3700v1_3800B:green:inet" "eth0.2"
-       ucidef_set_led_netdev "wlan0" "WIFI2G" "DGND3700v1_3800B:green:wifi2g" "wlan0"
-       ucidef_set_led_netdev "wlan1" "WIFI5G" "DGND3700v1_3800B:blue:wifi5g" "wlan1"
-       ucidef_set_led_usbdev "usb1" "USB1" "DGND3700v1_3800B:green:usb-back" "1-1"
-       ucidef_set_led_usbdev "usb2" "USB2" "DGND3700v1_3800B:green:usb-front" "1-2"
-       ;;
-netgear,evg2000)
-       ucidef_set_led_netdev "lan" "LAN" "EVG2000:green:lan" "eth0"
-       ucidef_set_led_netdev "wan" "WAN" "EVG2000:green:wan" "eth1"
-       ucidef_set_led_netdev "wlan0" "WIFI" "EVG2000:green:wireless" "wlan0"
-       ucidef_set_led_usbdev "usb1" "USB1" "EVG2000:green:voip1" "1-1"
-       ucidef_set_led_usbdev "usb2" "USB2" "EVG2000:green:voip2" "1-2"
-       ;;
-nucom,r5010un-v2)
-       ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
-       ;;
-sagem,fast-2704n)
-       ucidef_set_led_netdev "wan" "WAN" "F@ST2704N:green:inet" "eth0.2"
-       ;;
-sagem,fast-2704-v2)
-       ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
-       ;;
-sercomm,ad1018-nor)
-       ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
-       ;;
-telsey,cpva502plus)
-       ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0"
-       ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network
deleted file mode 100755 (executable)
index 7fa1514..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2012-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
-actiontec,r1000h|\
-dynalink,rta770bw|\
-dynalink,rta770w|\
-netgear,cvg834g|\
-netgear,evg2000|\
-t-com,speedport-w-303v|\
-t-com,speedport-w-500v)
-       ucidef_set_interface_lan "eth0"
-       ;;
-adb,a4001n1|\
-adb,a4001n|\
-adb,av4202n|\
-brcm,bcm963281tan|\
-brcm,bcm96328avng|\
-brcm,bcm96368mvngr|\
-comtrend,ar-5381u|\
-comtrend,ar-5387un|\
-comtrend,vr-3025u|\
-comtrend,vr-3025un|\
-comtrend,vr-3026e|\
-d-link,dsl-274xb-f1|\
-d-link,dsl-275xb-d1|\
-huawei,echolife-hg622|\
-huawei,echolife-hg655b|\
-nucom,r5010un-v2|\
-sagem,fast-2504n|\
-sagem,fast-2704-v2|\
-zyxel,p870hw-51a-v2)
-       ucidef_add_switch "switch0" \
-               "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0"
-       ;;
-alcatel,rg100a|\
-belkin,f5d7633|\
-brcm,bcm96348gw|\
-brcm,bcm96348gw-10|\
-brcm,bcm96348gw-11|\
-brcm,bcm96358vw|\
-brcm,bcm96358vw2|\
-bt,voyager-2500v-bb|\
-davolink,dv-201amr|\
-d-link,dsl-2650u|\
-dynalink,rta1025w|\
-netgear,dg834gt-pn|\
-pirelli,agpf-s0|\
-sagem,fast-2404|\
-telsey,magic|\
-tp-link,td-w8900gb|\
-usrobotics,usr9108)
-       ucidef_set_interfaces_lan_wan "eth1" "eth0"
-       ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth1"
-       ;;
-asmax,ar-1004g|\
-brcm,bcm96338gw|\
-brcm,bcm96338w|\
-bt,voyager-2110|\
-comtrend,ct-5365|\
-comtrend,ct-536plus|\
-comtrend,ct-6373|\
-d-link,dsl-2640b-b|\
-d-link,dsl-2640u|\
-dynalink,rta1320|\
-netgear,dg834g-v4|\
-sagem,fast-2604|\
-telsey,cpva642)
-       ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-       ;;
-brcm,bcm963268bu-p300)
-       ucidef_add_switch "switch0" \
-               "0:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8t@eth0"
-       ;;
-brcm,bcm96368mvwg)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "4:lan" "5:lan" "8t@eth0"
-       ;;
-bt,home-hub-2-a|\
-d-link,dsl-274xb-c2|\
-huawei,echolife-hg553|\
-huawei,echolife-hg556a-a|\
-huawei,echolife-hg556a-b|\
-huawei,echolife-hg556a-c)
-       ucidef_add_switch "switch0" \
-               "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
-       ;;
-comtrend,ar-5315u|\
-observa,vh4032n|\
-sagem,fast-2704n)
-       ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
-       ;;
-comtrend,wap-5813n)
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
-       ;;
-d-link,dva-g3810bn-tl|\
-huawei,echolife-hg520v|\
-sfr,neufbox-4-foxconn-r1|\
-sfr,neufbox-4-sercomm-r0)
-       ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
-       ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth1"
-       ;;
-inteno,vg50)
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
-       ;;
-inventel,livebox-1|\
-telsey,cpva502plus)
-       ucidef_set_interfaces_lan_wan "eth0" "eth1"
-       ;;
-netgear,dgnd3700-v1)
-       ucidef_add_switch "switch0" \
-               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "8t@eth0"
-       ;;
-sercomm,ad1018-nor)
-       ucidef_add_switch "switch0" \
-               "1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
-       ;;
-sfr,neufbox-6-sercomm-r0)
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
-       ;;
-sky,sr102)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-       ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
-       ;;
-*)
-       ucidef_set_interfaces_lan_wan "eth1" "eth0"
-       ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
deleted file mode 100644 (file)
index 4b6d8d6..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007-2013 OpenWrt.org
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-set_state() {
-       case "$(board_name)" in
-       actiontec,r1000h)
-               status_led="R1000H:green:power"
-               ;;
-       adb,a4001n)
-               status_led="A4001N:green:power"
-               ;;
-       adb,a4001n1)
-               status_led="A4001N1:green:power"
-               ;;
-       adb,av4202n)
-               status_led="AV4202N:white:power"
-               ;;
-       asmax,ar-1004g)
-               status_led="AR1004G:green:power"
-               ;;
-       brcm,bcm963281tan)
-               status_led="963281TAN::power"
-               ;;
-       brcm,bcm96328avng)
-               status_led="96328avng::power"
-               ;;
-       brcm,bcm96348gw)
-               status_led="96348GW:green:power"
-               ;;
-       brcm,bcm96348gw-11)
-               status_led="96348GW-11:green:power"
-               ;;
-       bt,home-hub-2-a)
-               status_led="HOMEHUB2A:green:upgrading"
-               status_led2="HOMEHUB2A:blue:upgrading"
-               ;;
-       bt,voyager-2110)
-               status_led="V2110:power:green"
-               ;;
-       comtrend,ar-5315u)
-               status_led="AR-5315u:green:power"
-               ;;
-       comtrend,ar-5381u)
-               status_led="AR-5381u:green:power"
-               ;;
-       comtrend,ar-5387un)
-               status_led="AR-5387un:green:power"
-               ;;
-       comtrend,ct-536plus)
-               status_led="CT536_CT5621:green:power"
-               ;;
-       comtrend,vr-3025u)
-               status_led="VR-3025u:green:power"
-               ;;
-       comtrend,vr-3025un)
-               status_led="VR-3025un:green:power"
-               ;;
-       comtrend,vr-3026e)
-               status_led="VR-3026e:green:power"
-               ;;
-       comtrend,wap-5813n)
-               status_led="WAP-5813n:green:power"
-               ;;
-       d-link,dsl-2640b-b)
-               status_led="D-4P-W:green:power"
-               ;;
-       d-link,dsl-274xb-c2|\
-       d-link,dsl-274xb-f1)
-               status_led="dsl-274xb:green:power"
-               ;;
-       d-link,dsl-275xb-d1)
-               status_led="dsl-275xb:green:power"
-               ;;
-       dynalink,rta770bw)
-               status_led="RTA770BW:green:diag"
-               ;;
-       dynalink,rta770w)
-               status_led="RTA770W:green:diag"
-               ;;
-       huawei,echolife-hg520v)
-               status_led="HW520:green:net"
-               ;;
-       huawei,echolife-hg553)
-               status_led="HW553:blue:power"
-               ;;
-       huawei,echolife-hg556a-a|\
-       huawei,echolife-hg556a-b|\
-       huawei,echolife-hg556a-c)
-               status_led="HW556:red:power"
-               ;;
-       huawei,echolife-hg655b)
-               status_led="HW65x:green:power"
-               ;;
-       inventel,livebox-1)
-               status_led="Livebox1:red:adsl-fail-power"
-               ;;
-       netgear,cvg834g)
-               status_led="CVG834G:green:power"
-               ;;
-       netgear,dgnd3700-v1)
-               status_led="DGND3700v1_3800B:green:power"
-               ;;
-       netgear,evg2000)
-               status_led="EVG2000:green:power"
-               ;;
-       nucom,r5010un-v2)
-               status_led="R5010UNv2:green:power"
-               ;;
-       observa,vh4032n)
-               status_led="VH4032N:blue:power"
-               ;;
-       sagem,fast-2504n)
-               status_led="fast2504n:green:ok"
-               ;;
-       sagem,fast-2704n)
-               status_led2="F@ST2704N:red:power"
-               ;;
-       sagem,fast-2704-v2)
-               status_led="F@ST2704V2:green:power"
-               ;;
-       sercomm,ad1018-nor)
-               status_led="AD1018:green:power"
-               ;;
-       sky,sr102)
-               status_led="SR102:white:power"
-               status_led2="SR102:red:power"
-               ;;
-       t-com,speedport-w-303v)
-               status_led="spw303v:green:power+adsl"
-               ;;
-       t-com,speedport-w-500v)
-               status_led="SPW500V:green:power"
-               ;;
-       tecom,gw6200)
-               status_led="GW6200:green:line1"
-               status_led2="GW6200:green:tel"
-               ;;
-       telsey,cpva642)
-               status_led="CPVA642:green:power:"
-               ;;
-       zyxel,p870hw-51a-v2)
-               status_led="P870HW-51a:green:power"
-               ;;
-       esac
-
-       case "$1" in
-       preinit)
-               status_led_blink_preinit
-               ;;
-       failsafe)
-               status_led_blink_failsafe
-               ;;
-       preinit_regular)
-               status_led_blink_preinit_regular
-               ;;
-       done)
-               if [ "${status_led/power}" != "$status_led" ]; then
-                       status_led_on
-               else
-                       status_led_off
-               fi
-               ;;
-       esac
-}
diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644 (file)
index 0e92481..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-# Based on gabors ralink wisoc implementation.
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"rt2x00.eeprom" )
-       case $board in
-       huawei,echolife-hg556a-c)
-               caldata_extract "cal_data" 0x1fe00 0x200
-               ;;
-       huawei,echolife-hg622|\
-       huawei,echolife-hg655b)
-               caldata_extract "cal_data" 0x0 0x200
-               ;;
-       *)
-               caldata_die "board $board is not supported yet"
-               ;;
-       esac
-       ;;
-esac
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
deleted file mode 100644 (file)
index c33e56f..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2007 OpenWrt.org
-#
-#
-
-. /lib/functions.sh
-
-do_fixcrc() {
-       mtd fixtrx linux
-}
-
-case "$(board_name)" in
-       actiontec,r1000h|\
-       adb,a4001n|\
-       adb,a4001n1|\
-       brcm,bcm96328avng|\
-       brcm,bcm963281tan|\
-       bt,voyager-2110|\
-       bt,voyager-2500v-bb|\
-       comtrend,ar-5315u|\
-       comtrend,ar-5381u|\
-       comtrend,ar-5387un|\
-       comtrend,vr-3025u|\
-       comtrend,vr-3025un|\
-       comtrend,vr-3026e|\
-       comtrend,wap-5813n|\
-       comtrend,ct-6373|\
-       d-link,dsl-274xb-f1|\
-       dynalink,rta770bw|\
-       dynalink,rta770w|\
-       huawei,echolife-hg622|\
-       netgear,evg2000|\
-       nucom,r5010un-v2|\
-       observa,vh4032n|\
-       t-com,speedport-w-303v|\
-       telsey,cpva502plus|\
-       telsey,cpva642|\
-       telsey,magic|\
-       zyxel,p870hw-51a-v2)
-               do_fixcrc
-               ;;
-esac
diff --git a/target/linux/brcm63xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm63xx/base-files/lib/upgrade/platform.sh
deleted file mode 100644 (file)
index 5c9e2c2..0000000
+++ /dev/null
@@ -1,16 +0,0 @@
-PART_NAME=linux
-platform_check_image() {
-       [ "$#" -gt 1 ] && return 1
-       case "$(get_magic_word "$1")" in
-               3600|3700|3800)
-                       # 6348GW-11 boards use openwrt-96348GW-11-squashfs-cfe.bin files
-                       return 0
-                       ;;
-               *)
-                       echo "Invalid image type. Please use only .bin files"
-                       return 1
-                       ;;
-       esac
-}
-
-# use default for platform_do_upgrade()
diff --git a/target/linux/brcm63xx/config-4.14 b/target/linux/brcm63xx/config-4.14
deleted file mode 100644 (file)
index 2a00195..0000000
+++ /dev/null
@@ -1,281 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-CONFIG_BCMA_DRIVER_PCI=y
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LEDS_BCM6328=y
-CONFIG_LEDS_BCM6358=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PARSER_IMAGETAG=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM6318=y
-CONFIG_PINCTRL_BCM63268=y
-CONFIG_PINCTRL_BCM6328=y
-CONFIG_PINCTRL_BCM6348=y
-CONFIG_PINCTRL_BCM6358=y
-CONFIG_PINCTRL_BCM6362=y
-CONFIG_PINCTRL_BCM6368=y
-CONFIG_PINCTRL_BCM63XX=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SPI_DRIVER=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/brcm63xx/config-4.19 b/target/linux/brcm63xx/config-4.19
deleted file mode 100644 (file)
index 2a00195..0000000
+++ /dev/null
@@ -1,281 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
-# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-CONFIG_BCMA_DRIVER_PCI=y
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_LEDS_BCM6328=y
-CONFIG_LEDS_BCM6358=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PARSER_IMAGETAG=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM6318=y
-CONFIG_PINCTRL_BCM63268=y
-CONFIG_PINCTRL_BCM6328=y
-CONFIG_PINCTRL_BCM6348=y
-CONFIG_PINCTRL_BCM6358=y
-CONFIG_PINCTRL_BCM6362=y
-CONFIG_PINCTRL_BCM6368=y
-CONFIG_PINCTRL_BCM63XX=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SPI_DRIVER=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/brcm63xx/dts/bcm3368-netgear-cvg834g.dts b/target/linux/brcm63xx/dts/bcm3368-netgear-cvg834g.dts
deleted file mode 100644 (file)
index 2b25d00..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-/dts-v1/;
-
-#include "bcm3368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear CVG834G";
-       compatible = "netgear,cvg834g", "brcm,bcm3368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "CVG834G:green:power";
-                       gpios = <&gpio1 5 0>;
-                       default-state = "on";
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
-
-&uart1 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm3368.dtsi b/target/linux/brcm63xx/dts/bcm3368.dtsi
deleted file mode 100644 (file)
index 66cb6ab..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm3368";
-
-       aliases {
-               pflash = &pflash;
-               gpio0 = &gpio0;
-               gpio1 = &gpio1;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi0 = &lsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       pflash: nor@1e000000 {
-               compatible = "cfi-flash";
-               reg = <0x1e000000 0x2000000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               status = "disabled";
-       };
-
-       ubus@fff00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               periph_intc: interrupt-controller@fff8c00c {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0xfff8c00c 0x8>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               ext_intc0: interrupt-controller@fff8c014 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfff8c014 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <25>, <26>, <27>, <28>;
-               };
-
-               gpio1: gpio-controller@fff8c080 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xfff8c080 4>, <0xfff8c088 4>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ngpios = <8>;
-               };
-
-               gpio0: gpio-controller@fff8c084 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xfff8c084 4>, <0xfff8c08c 4>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-               };
-
-               uart0: serial@fff8c100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfff8c100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@fff8c120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfff8c120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <3>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@fff8c800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-spi";
-                       reg = <0xfff8c800 0x70c>;
-                       interrupts = <1>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm63168-sky-sr102.dts b/target/linux/brcm63xx/dts/bcm63168-sky-sr102.dts
deleted file mode 100644 (file)
index e47822a..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm63268.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "SKY SR102";
-       compatible = "sky,sr102", "brcm,bcm63168", "brcm,bcm63268";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 0>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan1_green {
-                       label = "SR102:green:lan1";
-                       gpios = <&pinctrl 1 1>;
-               };
-               power_red {
-                       label = "SR102:red:power";
-                       gpios = <&pinctrl 2 1>;
-               };
-               wifi_red {
-                       label = "SR102:red:wifi";
-                       gpios = <&pinctrl 3 1>;
-               };
-               inet_red {
-                       label = "SR102:red:inet";
-                       gpios = <&pinctrl 4 1>;
-               };
-               inet_white {
-                       label = "SR102:white:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_white {
-                       label = "SR102:white:power";
-                       gpios = <&pinctrl 6 0>;
-                       default-state = "on";
-               };
-               wifi_white {
-                       label = "SR102:white:wifi";
-                       gpios = <&pinctrl 8 0>;
-               };
-               lan2_red {
-                       label = "SR102:red:lan2";
-                       gpios = <&pinctrl 9 1>;
-               };
-               lan3_red {
-                       label = "SR102:red:lan3";
-                       gpios = <&pinctrl 10 1>;
-               };
-               lan4_red {
-                       label = "SR102:red:lan4";
-                       gpios = <&pinctrl 11 1>;
-               };
-               lan1_red {
-                       label = "SR102:red:lan1";
-                       gpios = <&pinctrl 12 1>;
-               };
-               lan2_green {
-                       label = "SR102:green:lan2";
-                       gpios = <&pinctrl 13 0>;
-               };
-               lan3_green {
-                       label = "SR102:green:lan3";
-                       gpios = <&pinctrl 14 1>;
-               };
-               lan4_green {
-                       label = "SR102:green:lan4";
-                       gpios = <&pinctrl 15 1>;
-               };
-               hd_white {
-                       label = "SR102:white:hd";
-                       gpios = <&pinctrl 18 0>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts b/target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref-p300.dts
deleted file mode 100644 (file)
index 4edab64..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96318REF_P300 reference board";
-       compatible = "brcm,bcm96318ref-p300", "brcm,bcm6318";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet {
-                       label = "96318REF_P300:green:inet";
-                       gpios = <&pinctrl 8 1>;
-               };
-
-               inet_fail {
-                       label = "96318REF_P300:red:inet-fail";
-                       gpios = <&pinctrl 9 1>;
-               };
-
-               post_failed {
-                       label = "96318REF_P300:red:post-failed";
-                       gpios = <&pinctrl 11 1>;
-               };
-
-               usb_pwron {
-                       label = "96318REF_P300::usb-pwron";
-                       gpios = <&pinctrl 13 1>;
-                       default-state = "on";
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <62500000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb_pwron>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref.dts b/target/linux/brcm63xx/dts/bcm6318-brcm-bcm96318ref.dts
deleted file mode 100644 (file)
index f6136b5..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96318REF reference board";
-       compatible = "brcm,bcm96318ref", "brcm,bcm6318";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet {
-                       label = "96318REF:green:inet";
-                       gpios = <&pinctrl 8 1>;
-               };
-
-               inet_fail {
-                       label = "96318REF:red:inet-fail";
-                       gpios = <&pinctrl 9 1>;
-               };
-
-               post_failed {
-                       label = "96318REF:red:post-failed";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <62500000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb_pwron>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts b/target/linux/brcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
deleted file mode 100644 (file)
index d1085e7..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend AR-5315u";
-       compatible = "comtrend,ar-5315u", "brcm,bcm6318";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 3 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               wps_green {
-                       label = "AR-5315u:green:wps";
-                       gpios = <&pinctrl 0 1>;
-               };
-               power_green {
-                       label = "AR-5315u:green:power";
-                       gpios = <&pinctrl 1 1>;
-                       default-state = "on";
-               };
-               usb_green {
-                       label = "AR-5315u:green:usb";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "AR-5315u:green:inet";
-                       gpios = <&pinctrl 8 1>;
-               };
-               inet_red {
-                       label = "AR-5315u:red:inet";
-                       gpios = <&pinctrl 9 1>;
-               };
-               dsl_green {
-                       label = "AR-5315u:green:dsl";
-                       gpios = <&pinctrl 10 1>;
-               };
-               power_red {
-                       label = "AR-5315u:red:power";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <62500000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0xfe0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@ff0000 {
-                               reg = <0xff0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
-                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts b/target/linux/brcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts
deleted file mode 100644 (file)
index cf5b296..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2750B/DSL-2751 rev D1";
-       compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&pinctrl 2 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "dsl-275xb:green:power";
-                       gpios = <&pinctrl 3 1>;
-                       default-state = "on";
-               };
-
-               inet_green {
-                       label = "dsl-275xb:green:inet";
-                       gpios = <&pinctrl 8 1>;
-               };
-
-               inet_red {
-                       label = "dsl-275xb:red:inet-fail";
-                       gpios = <&pinctrl 9 1>;
-               };
-
-               power_red {
-                       label = "dsl-275xb:red:post-failed";
-                       gpios = <&pinctrl 11 1>;
-               };
-
-               wps_blue {
-                       label = "dsl-275xb:blue:wps";
-                       gpios = <&pinctrl 16 1>;
-               };
-
-               dsl_green {
-                       label = "dsl-275xb:green:dsl";
-                       gpios = <&pinctrl 17 1>;
-               };
-
-               usb_green {
-                       /* not user controllable? */
-                       label = "dsl-275xb:green:usb";
-                       gpios = <&pinctrl 49 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <62500000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-
-       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
-                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318-sagem-fast-2704n.dts b/target/linux/brcm63xx/dts/bcm6318-sagem-fast-2704n.dts
deleted file mode 100644 (file)
index f09310e..0000000
+++ /dev/null
@@ -1,135 +0,0 @@
-/dts-v1/;
-
-#include "bcm6318.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sagem F@st 2704N";
-       compatible = "sagem,fast-2704n", "brcm,bcm6318";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 1 0>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               wps_green {
-                       label = "F@ST2704N:green:wps";
-                       gpios = <&pinctrl 2 1>;
-               };
-               lan1_green {
-                       label = "F@ST2704N:green:lan1";
-                       gpios = <&pinctrl 4 1>;
-               };
-               lan2_green {
-                       label = "F@ST2704N:green:lan2";
-                       gpios = <&pinctrl 5 1>;
-               };
-               lan3_green {
-                       label = "F@ST2704N:green:lan3";
-                       gpios = <&pinctrl 6 1>;
-               };
-               lan4_green {
-                       label = "F@ST2704N:green:lan4";
-                       gpios = <&pinctrl 7 1>;
-               };
-               inet_green {
-                       label = "F@ST2704N:green:inet";
-                       gpios = <&pinctrl 8 1>;
-               };
-               inet_red {
-                       label = "F@ST2704N:red:inet";
-                       gpios = <&pinctrl 9 1>;
-               };
-               dsl_green {
-                       label = "F@ST2704N:green:dsl";
-                       gpios = <&pinctrl 10 1>;
-               };
-               power_red {
-                       label = "F@ST2704N:red:power";
-                       gpios = <&pinctrl 11 1>;
-               };
-               power_green {
-                       label = "F@ST2704N:green:power";
-                       gpios = <&pinctrl 47 1>;
-                       default-state = "on";
-               };
-               usb_green {
-                       label = "F@ST2704N:green:usb";
-                       gpios = <&pinctrl 49 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <62500000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6318.dtsi b/target/linux/brcm63xx/dts/bcm6318.dtsi
deleted file mode 100644 (file)
index a902c1b..0000000
+++ /dev/null
@@ -1,200 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6318";
-
-       aliases {
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               spi1 = &hsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips3300", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6318-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <24>, <25>, <26>, <27>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x20>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               pinctrl: pin-controller@10000080 {
-                       compatible = "brcm,bcm6318-pinctrl";
-                       reg = <0x10000080 0x08>,
-                             <0x10000088 0x08>,
-                             <0x10000098 0x04>,
-                             <0x1000009c 0x0c>,
-                             <0x100000d4 0x18>;
-                       reg-names = "dirout", "dat", "mode", "mux", "pad";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&ext_intc>;
-                       interrupts = <0 0>, <1 0>;
-                       interrupt-names = "gpio33", "gpio34";
-
-                       pinctrl_ephy0_spd_led: ephy0_spd_led {
-                               function = "ephy0_spd_led";
-                               pins = "gpio0";
-                       };
-
-                       pinctrl_ephy1_spd_led: ephy1_spd_led {
-                               function = "ephy1_spd_led";
-                               pins = "gpio1";
-                       };
-
-                       pinctrl_ephy2_spd_led: ephy2_spd_led {
-                               function = "ephy2_spd_led";
-                               pins = "gpio2";
-                       };
-
-                       pinctrl_ephy3_spd_led: ephy3_spd_led {
-                               function = "ephy3_spd_led";
-                               pins = "gpio3";
-                       };
-
-                       pinctrl_ephy0_act_led: ephy0_act_led {
-                               function = "ephy0_act_led";
-                               pins = "gpio4";
-                       };
-
-                       pinctrl_ephy1_act_led: ephy1_act_led {
-                               function = "ephy1_act_led";
-                               pins = "gpio5";
-                       };
-
-                       pinctrl_ephy2_act_led: ephy2_act_led {
-                               function = "ephy2_act_led";
-                               pins = "gpio6";
-                       };
-
-                       pinctrl_ephy3_act_led: ephy3_act_led {
-                               function = "ephy3_act_led";
-                               pins = "gpio7";
-                       };
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio6";
-                               };
-
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio7";
-                               };
-                       };
-
-                       pinctrl_inet_act_led: inet_act_led {
-                               function = "inet_act_led";
-                               pins = "gpio8";
-                       };
-
-                       pinctrl_inet_fail_led: inet_fail_led {
-                               function = "inet_fail_led";
-                               pins = "gpio9";
-                       };
-
-                       pinctrl_dsl_led: dsl_led {
-                               function = "dsl_led";
-                               pins = "gpio10";
-                       };
-
-                       pinctrl_post_fail_led: post_fail_led {
-                               function = "post_fail_led";
-                               pins = "gpio11";
-                       };
-
-                       pinctrl_wlan_wps_led: wlan_wps_led {
-                               function = "wlan_wps_led";
-                               pins = "gpio12";
-                       };
-
-                       pinctrl_usb_pwron: usb_pwron {
-                               function = "usb_pwron";
-                               pins = "gpio13";
-                       };
-
-                       pinctrl_usb_device_led: usb_device_led {
-                               function = "usb_device_led";
-                               pins = "gpio13";
-                       };
-
-                       pinctrl_usb_active: usb_active {
-                               function = "usb_active";
-                               pins = "gpio40";
-                       };
-               };
-
-               uart0: serial@10000100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <28>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               leds: led-controller@10000200 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-leds";
-                       reg = <0x10000200 0x24>;
-                       status = "disabled";
-               };
-
-               hsspi: spi@10003000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-hsspi";
-                       reg = <0x10003000 0x600>;
-                       interrupts = <29>;
-                       /* clocks = <&clkctl 25>; */
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts b/target/linux/brcm63xx/dts/bcm63268-brcm-bcm963268bu-p300.dts
deleted file mode 100644 (file)
index b417688..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/dts-v1/;
-
-#include "bcm63268.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM963268BU_P300 reference board";
-       compatible = "brcm,bcm963268bu-p300", "brcm,bcm63268";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 32 0>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 33 0>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <20000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm63268-inteno-vg50.dts b/target/linux/brcm63xx/dts/bcm63268-inteno-vg50.dts
deleted file mode 100644 (file)
index dbbea13..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/dts-v1/;
-
-#include "bcm63268.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Inteno VG50";
-       compatible = "inteno,vg50", "brcm,bcm63268";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 32 0>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 34 0>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <20000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm63268.dtsi b/target/linux/brcm63xx/dts/bcm63268.dtsi
deleted file mode 100644 (file)
index 1b4b3e6..0000000
+++ /dev/null
@@ -1,250 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm63268";
-
-       aliases {
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi0 = &lsspi;
-               spi1 = &hsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <44>, <45>, <46>, <47>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x20>,
-                             <0x10000040 0x20>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>, <3>;
-               };
-
-               pinctrl: pin-controller@100000c0 {
-                       compatible = "brcm,bcm63268-pinctrl";
-                       reg = <0x100000c0 0x8>,
-                             <0x100000c8 0x8>,
-                             <0x100000d0 0x4>,
-                             <0x100000d8 0x4>,
-                             <0x100000dc 0x4>,
-                             <0x100000f8 0x4>;
-                       reg-names = "dirout", "dat", "led", "mode",
-                                   "ctrl", "basemode";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
-                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio0";
-                               };
-
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio1";
-                               };
-                       };
-
-                       pinctrl_hsspi_cs4: hsspi_cs4 {
-                               function = "hsspi_cs4";
-                               pins = "gpio16";
-                       };
-
-                       pinctrl_hsspi_cs5: hsspi_cs5 {
-                               function = "hsspi_cs5";
-                               pins = "gpio17";
-                       };
-
-                       pinctrl_hsspi_cs6: hsspi_cs6 {
-                               function = "hsspi_cs6";
-                               pins = "gpio8";
-                       };
-
-                       pinctrl_hsspi_cs7: hsspi_cs7 {
-                               function = "hsspi_cs7";
-                               pins = "gpio9";
-                       };
-
-                       pinctrl_adsl_spi: adsl_spi {
-                               pinctrl_adsl_spi_miso: adsl_spi_miso {
-                                       function = "adsl_spi_miso";
-                                       pins = "gpio18";
-                               };
-
-                               pinctrl_adsl_spi_mosi: adsl_spi_mosi {
-                                       function = "adsl_spi_mosi";
-                                       pins = "gpio19";
-                               };
-                       };
-
-                       pinctrl_vreq_clk: vreq_clk {
-                               function = "vreq_clk";
-                               pins = "gpio22";
-                       };
-
-                       pinctrl_pcie_clkreq_b: pcie_clkreq_b {
-                               function = "pcie_clkreq_b";
-                               pins = "gpio23";
-                       };
-
-                       pinctrl_robosw_led_clk: robosw_led_clk {
-                               function = "robosw_led_clk";
-                               pins = "gpio30";
-                       };
-
-                       pinctrl_robosw_led_data: robosw_led_data {
-                               function = "robosw_led_data";
-                               pins = "gpio31";
-                       };
-
-                       pinctrl_nand: nand {
-                               function = "nand";
-                               group = "nand_grp";
-                       };
-
-                       pinctrl_gpio35_alt: gpio35_alt {
-                               function = "gpio35_alt";
-                               pin = "gpio35";
-                       };
-
-                       pinctrl_dectpd: dectpd {
-                               function = "dectpd";
-                               group = "dectpd_grp";
-                       };
-
-                       pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
-                               function = "vdsl_phy_override_0";
-                               group = "vdsl_phy_override_0_grp";
-                       };
-
-                       pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
-                               function = "vdsl_phy_override_1";
-                               group = "vdsl_phy_override_1_grp";
-                       };
-
-                       pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
-                               function = "vdsl_phy_override_2";
-                               group = "vdsl_phy_override_2_grp";
-                       };
-
-                       pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
-                               function = "vdsl_phy_override_3";
-                               group = "vdsl_phy_override_3_grp";
-                       };
-
-                       pinctrl_dsl_gpio8: dsl_gpio8 {
-                               function = "dsl_gpio8";
-                               group = "dsl_gpio8";
-                       };
-
-                       pinctrl_dsl_gpio9: dsl_gpio9 {
-                               function = "dsl_gpio9";
-                               group = "dsl_gpio9";
-                       };
-               };
-
-               uart0: serial@10000180 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000180 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <5>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@100001a0 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x100001a0 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <34>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@10000800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-spi";
-                       reg = <0x10000800 0x70c>;
-                       interrupts = <80>;
-                       /* clocks = <&clkctl 15>; */
-               };
-
-               hsspi: spi@10001000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-hsspi";
-                       reg = <0x10001000 0x600>;
-                       interrupts = <6>;
-                       /* clocks = <&clkctl 16>; */
-               };
-
-               leds: led-controller@10001900 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-leds";
-                       reg = <0x10001900 0x24>;
-                       status = "disabled";
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts b/target/linux/brcm63xx/dts/bcm63269-brcm-bcm963269bhr.dts
deleted file mode 100644 (file)
index bcd2286..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-/dts-v1/;
-
-#include "bcm63268.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM963269BHR reference board";
-       compatible = "brcm,bcm963269bhr", "brcm,bcm63269", "brcm,bcm63268";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 32 0>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb1 {
-                       label = "963269BHR:green:usb1";
-                       gpios = <&pinctrl 9 1>;
-               };
-
-               usb2 {
-                       label = "963269BHR:green:usb2";
-                       gpios = <&pinctrl 10 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <20000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-adb-a4001n.dts b/target/linux/brcm63xx/dts/bcm6328-adb-a4001n.dts
deleted file mode 100644 (file)
index 814274b..0000000
+++ /dev/null
@@ -1,101 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "ADB P.DG A4001N";
-       compatible = "adb,a4001n", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_red {
-                       label = "A4001N:red:inet";
-                       gpios = <&pinctrl 1 0>;
-               };
-               power_red {
-                       label = "A4001N:red:power";
-                       gpios = <&pinctrl 4 0>;
-               };
-               power_green {
-                       label = "A4001N:green:power";
-                       gpios = <&pinctrl 8 0>;
-                       default-state = "on";
-               };
-               usb_green {
-                       label = "A4001N:green:usb";
-                       gpios = <&pinctrl 10 1>;
-               };
-               dsl_green {
-                       label = "A4001N:green:dsl";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-adb-a4001n1.dts b/target/linux/brcm63xx/dts/bcm6328-adb-a4001n1.dts
deleted file mode 100644 (file)
index e58f865..0000000
+++ /dev/null
@@ -1,132 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "ADB P.DG A4001N1";
-       compatible = "adb,a4001n1", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wlan";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_red {
-                       label = "A4001N1:red:inet";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "A4001N1:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "A4001N1:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               ppp_red {
-                       label = "A4001N1:red:ppp";
-                       gpios = <&pinctrl 5 1>;
-               };
-               usb_green {
-                       label = "A4001N1:green:3g";
-                       gpios = <&pinctrl 6 1>;
-               };
-               usb_red {
-                       label = "A4001N1:red:3g";
-                       gpios = <&pinctrl 7 1>;
-               };
-               power_red {
-                       label = "A4001N1:red:power";
-                       gpios = <&pinctrl 8 1>;
-               };
-               wlan_green {
-                       label = "A4001N1:green:wlan";
-                       gpios = <&pinctrl 9 1>;
-               };
-               wlan_red {
-                       label = "A4001N1:red:wlan";
-                       gpios = <&pinctrl 10 1>;
-               };
-               inet_green {
-                       label = "A4001N1:green:inet";
-                       gpios = <&pinctrl 11 1>;
-               };
-               eth_red {
-                       label = "A4001N1:red:eth";
-                       gpios = <&pinctrl 20 1>;
-               };
-               eth_green {
-                       label = "A4001N1:green:eth";
-                       gpios = <&pinctrl 31 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0xfe0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@ff0000 {
-                               reg = <0xff0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-brcm-bcm963281tan.dts b/target/linux/brcm63xx/dts/bcm6328-brcm-bcm963281tan.dts
deleted file mode 100644 (file)
index 6fbac7d..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom bcm963281TAN reference board";
-       compatible = "brcm,bcm963281tan", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet {
-                       label = "963281TAN::internet";
-                       gpios = <&pinctrl 1 1>;
-               };
-               power {
-                       label = "963281TAN::power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               inet_fail {
-                       label = "963281TAN::internet-fail";
-                       gpios = <&pinctrl 7 1>;
-               };
-               power_fail {
-                       label = "963281TAN::power-fail";
-                       gpios = <&pinctrl 8 1>;
-               };
-               wps {
-                       label = "963281TAN::wps";
-                       gpios = <&pinctrl 9 1>;
-               };
-               dsl {
-                       label = "963281TAN::dsl";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-brcm-bcm96328avng.dts b/target/linux/brcm63xx/dts/bcm6328-brcm-bcm96328avng.dts
deleted file mode 100644 (file)
index a0a6c9e..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96328avng reference board";
-       compatible = "brcm,bcm96328avng", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_fail {
-                       label = "96328avng::internet-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               dsl {
-                       label = "96328avng::dsl";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power {
-                       label = "96328avng::power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_fail {
-                       label = "96328avng::power-fail";
-                       gpios = <&pinctrl 8 1>;
-               };
-               wps {
-                       label = "96328avng::wps";
-                       gpios = <&pinctrl 9 1>;
-               };
-               inet {
-                       label = "96328avng::internet";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb_port1_device>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5381u.dts b/target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5381u.dts
deleted file mode 100644 (file)
index e336024..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend AR-5381u";
-       compatible = "comtrend,ar-5381u", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               alarm_red {
-                       label = "AR-5381u:red:alarm";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "AR-5381u:green:inet";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "AR-5381u:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0xfe0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@ff0000 {
-                               reg = <0xff0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5387un.dts b/target/linux/brcm63xx/dts/bcm6328-comtrend-ar-5387un.dts
deleted file mode 100644 (file)
index 209eda3..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend AR-5387un";
-       compatible = "comtrend,ar-5387un", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_red {
-                       label = "AR-5387un:red:inet";
-                       gpios = <&pinctrl 1 0>;
-               };
-               power_red {
-                       label = "AR-5387un:red:power";
-                       gpios = <&pinctrl 4 0>;
-               };
-               inet_green {
-                       label = "AR-5387un:green:inet";
-                       gpios = <&pinctrl 7 0>;
-               };
-               power_green {
-                       label = "AR-5387un:green:power";
-                       gpios = <&pinctrl 8 0>;
-                       default-state = "on";
-               };
-               dsl_green {
-                       label = "AR-5387un:green:dsl";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0xfe0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@ff0000 {
-                               reg = <0xff0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts b/target/linux/brcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts
deleted file mode 100644 (file)
index f3fab05..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2740B/DSL-2741B rev F1";
-       compatible = "d-link,dsl-274xb-f1", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_red {
-                       label = "dsl-274xb:red:internet";
-                       gpios = <&pinctrl 2 1>;
-               };
-               dsl_green {
-                       label = "dsl-274xb:green:dsl";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "dsl-274xb:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "dsl-274xb:red:power";
-                       gpios = <&pinctrl 8 1>;
-               };
-               wps_blue {
-                       label = "dsl-274xb:blue:wps";
-                       gpios = <&pinctrl 9 1>;
-               };
-               inet_green {
-                       label = "dsl-274xb:green:internet";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7c0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       cal_data@7d0000 {
-                               reg = <0x7d0000 0x010000>;
-                               label = "cal_data";
-                               read-only;
-                       };
-
-                       nvram@7e0000 {
-                               reg = <0x7e0000 0x020000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-nucom-r5010un-v2.dts b/target/linux/brcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
deleted file mode 100644 (file)
index 5084bd8..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "NuCom R5010UN v2";
-       compatible = "nucom,r5010un-v2", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_green {
-                       label = "R5010UNv2:green:inet";
-                       gpios = <&pinctrl 1 1>;
-               };
-               inet_fail_red {
-                       label = "R5010UNv2:red:inet-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               dsl_red {
-                       label = "R5010UNv2:green:dsl";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "R5010UNv2:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_fail_red {
-                       label = "R5010UNv2:red:power-fail";
-                       gpios = <&pinctrl 5 1>;
-               };
-               wps_green {
-                       label = "R5010UNv2:green:wps";
-                       gpios = <&pinctrl 10 1>;
-               };
-               usb_green {
-                       label = "R5010UNv2:green:usb";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts b/target/linux/brcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts
deleted file mode 100644 (file)
index d00d8fb..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sagem F@st 2704 V2";
-       compatible = "sagem,fast-2704-v2", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&pinctrl 15 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb_green {
-                       label = "F@ST2704V2:green:usb";
-                       gpios = <&pinctrl 1 1>;
-               };
-               inet_red {
-                       label = "F@ST2704V2:red:inet";
-                       gpios = <&pinctrl 2 1>;
-               };
-               dsl_green {
-                       label = "F@ST2704V2:green:dsl";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "F@ST2704V2:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "F@ST2704V2:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               wps_green {
-                       label = "F@ST2704V2:green:wps";
-                       gpios = <&pinctrl 10 1>;
-               };
-               inet_green {
-                       label = "F@ST2704V2:green:inet";
-                       gpios = <&pinctrl 11 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts b/target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts
deleted file mode 100644 (file)
index 36899a4..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/dts-v1/;
-
-#include "bcm6328.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sercomm AD1018 (SPI flash mod)";
-       compatible = "sercomm,ad1018-nor", "brcm,bcm6328";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&pinctrl 25 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 31 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl_leds: leds {
-               function = "led";
-               pins = "gpio0", "gpio1";
-       };
-};
-
-&leds {
-       status = "ok";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
-                    &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
-                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
-
-       brcm,serial-leds;
-       brcm,serial-shift-inv;
-       brcm,serial-dat-low;
-
-       inet_red@0 {
-               reg = <0>;
-               active-low;
-               label = "AD1018:red:internet";
-       };
-
-       inet_green@1 {
-               reg = <1>;
-               active-low;
-               label = "AD1018:green:internet";
-       };
-
-       power_green@8 {
-               reg = <8>;
-               active-low;
-               label = "AD1018:green:power";
-               default-state = "on";
-       };
-
-       adsl_green@10 {
-               reg = <10>;
-               active-low;
-               label = "AD1018:green:adsl";
-       };
-
-       adsl_red@11 {
-               reg = <11>;
-               active-low;
-               label = "AD1018:red:adsl";
-       };
-
-       phone_green@12 {
-               reg = <12>;
-               active-low;
-               label = "AD1018:green:phone";
-       };
-
-       wps_green@13 {
-               reg = <13>;
-               active-low;
-               label = "AD1018:green:wps";
-       };
-
-       wifi_green@14 {
-               reg = <14>;
-               active-low;
-               label = "AD1018:green:wifi";
-       };
-
-       usb_green@15 {
-               reg = <15>;
-               active-low;
-               label = "AD1018:green:usb";
-       };
-
-       ephy0_spd@17 {
-               reg = <17>;
-               brcm,hardware-controlled;
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <16666667>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6328.dtsi b/target/linux/brcm63xx/dts/bcm6328.dtsi
deleted file mode 100644 (file)
index d08b6ba..0000000
+++ /dev/null
@@ -1,199 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6328";
-
-       aliases {
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi1 = &hsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <24>, <25>, <26>, <27>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x10>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               pinctrl: pin-controller@10000080 {
-                       compatible = "brcm,bcm6328-pinctrl";
-                       reg = <0x10000080 0x8>,
-                             <0x10000088 0x8>,
-                             <0x10000098 0x4>,
-                             <0x1000009c 0xc>;
-                       reg-names = "dirout", "dat", "mode", "mux";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&ext_intc>;
-                       interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
-                       interrupt-names = "gpio12", "gpio15",
-                                         "gpio23", "gpio24";
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio6";
-                               };
-
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio7";
-                               };
-                       };
-
-                       pinctrl_inet_act_led: inet_act_led {
-                               function = "inet_act_led";
-                               pins = "gpio11";
-                       };
-
-                       pinctrl_pcie_clkreq: pcie_clkreq {
-                               function = "pcie_clkreq";
-                               pins = "gpio16";
-                       };
-
-                       pinctrl_ephy0_spd_led: ephy0_spd_led {
-                               function = "led";
-                               pins = "gpio17";
-                       };
-
-                       pinctrl_ephy1_spd_led: ephy1_spd_led {
-                               function = "led";
-                               pins = "gpio18";
-                       };
-
-                       pinctrl_ephy2_spd_led: ephy2_spd_led {
-                               function = "led";
-                               pins = "gpio19";
-                       };
-
-                       pinctrl_ephy3_spd_led: ephy3_spd_led {
-                               function = "led";
-                               pins = "gpio20";
-                       };
-
-                       pinctrl_ephy0_act_led: ephy0_act_led {
-                               function = "ephy0_act_led";
-                               pins = "gpio25";
-                       };
-
-                       pinctrl_ephy1_act_led: ephy1_act_led {
-                               function = "ephy1_act_led";
-                               pins = "gpio26";
-                       };
-
-                       pinctrl_ephy2_act_led: ephy2_act_led {
-                               function = "ephy2_act_led";
-                               pins = "gpio27";
-                       };
-
-                       pinctrl_ephy3_act_led: ephy3_act_led {
-                               function = "ephy3_act_led";
-                               pins = "gpio28";
-                       };
-
-                       pinctrl_hsspi_cs1: hsspi_cs1 {
-                               function = "hsspi_cs1";
-                               pins = "hsspi_cs1";
-                       };
-
-                       pinctrl_usb_port1_device: usb_port1_device {
-                               function = "usb_device_port";
-                               pins = "usb_port1";
-                       };
-
-                       pinctrl_usb_port1_host: usb_port1_host {
-                               function = "usb_host_port";
-                               pins = "usb_port1";
-                       };
-               };
-
-               uart0: serial@10000100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <28>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@10000120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <39>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               leds: led-controller@10000800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-leds";
-                       reg = <0x10000800 0x24>;
-                       status = "disabled";
-               };
-
-               hsspi: spi@10001000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-hsspi";
-                       reg = <0x10001000 0x600>;
-                       interrupts = <29>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338gw.dts b/target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338gw.dts
deleted file mode 100644 (file)
index 92363ec..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include "bcm6338.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96338GW reference board";
-       compatible = "brcm,bcm96338gw", "brcm,bcm6338";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96338GW:green:power";
-                       gpios = <&gpio0 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96338GW:green:stop";
-                       gpios = <&gpio0 1 1>;
-               };
-               dsl_green {
-                       label = "96338GW:green:adsl";
-                       gpios = <&gpio0 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96338GW:green:ppp-fail";
-                       gpios = <&gpio0 4 1>;
-               };
-               ses_green {
-                       label = "96338GW:green:ses";
-                       gpios = <&gpio0 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338w.dts b/target/linux/brcm63xx/dts/bcm6338-brcm-bcm96338w.dts
deleted file mode 100644 (file)
index 3f6e8c0..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include "bcm6338.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96338W reference board";
-       compatible = "brcm,bcm96338w", "brcm,bcm6338";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96338W:green:power";
-                       gpios = <&gpio0 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96338W:green:stop";
-                       gpios = <&gpio0 1 1>;
-               };
-               dsl_green {
-                       label = "96338W:green:adsl";
-                       gpios = <&gpio0 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96338W:green:ppp-fail";
-                       gpios = <&gpio0 4 1>;
-               };
-               ses_green {
-                       label = "96338W:green:ses";
-                       gpios = <&gpio0 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6338-d-link-dsl-2640u.dts b/target/linux/brcm63xx/dts/bcm6338-d-link-dsl-2640u.dts
deleted file mode 100644 (file)
index 8cf96a3..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-/dts-v1/;
-
-#include "bcm6338.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2640U/BRU/C";
-       compatible = "d-link,dsl-2640u", "brcm,bcm6338";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               green_power {
-                       label = "96338W2_E7T:green:power";
-                       gpios = <&gpio0 0 1>;
-                       default-state = "on";
-               };
-
-               green_stop {
-                       label = "96338W2_E7T:green:ppp";
-                       gpios = <&gpio0 4 1>;
-               };
-
-               green_adsl {
-                       label = "96338W2_E7T:green:ppp-fail";
-                       gpios = <&gpio0 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6338-dynalink-rta1320.dts b/target/linux/brcm63xx/dts/bcm6338-dynalink-rta1320.dts
deleted file mode 100644 (file)
index bac6056..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include "bcm6338.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Dynalink RTA1320";
-       compatible = "dynalink,rta1320", "brcm,bcm6338";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               green_power {
-                       label = "RTA1320_16M:green:power";
-                       gpios = <&gpio0 0 1>;
-                       default-state = "on";
-               };
-               green_stop {
-                       label = "RTA1320_16M:green:stop";
-                       gpios = <&gpio0 1 1>;
-               };
-               green_adsl {
-                       label = "RTA1320_16M:green:adsl";
-                       gpios = <&gpio0 3 1>;
-               };
-               green_ppp {
-                       label = "RTA1320_16M:green:ppp";
-                       gpios = <&gpio0 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6338.dtsi b/target/linux/brcm63xx/dts/bcm6338.dtsi
deleted file mode 100644 (file)
index 3d1c068..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6338";
-
-       aliases {
-               pflash = &pflash;
-               gpio0 = &gpio0;
-               serial0 = &uart0;
-               spi0 = &lsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips3300", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       pflash: nor@1fc00000 {
-               compatible = "cfi-flash";
-               reg = <0x1fc00000 0x400000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               status = "disabled";
-       };
-
-       ubus@fff00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               periph_intc: interrupt-controller@fffe000c {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0xfffe000c 0x8>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               ext_intc: interrupt-controller@fffe0014 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfffe0014 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <3>, <4>, <5>, <6>;
-               };
-
-               gpio0: gpio-controller@fffe0404 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xfffe0404 4>, <0xfffe040c 4>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ngpios = <8>;
-               };
-
-               uart0: serial@fffe0300 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfffe0300 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@fffe0c00 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6348-spi";
-                       reg = <0xfffe0c00 0x40>;
-                       interrupts = <1>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts b/target/linux/brcm63xx/dts/bcm6345-brcm-bcm96345gw2.dts
deleted file mode 100644 (file)
index 5aea2dd..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-/dts-v1/;
-
-#include "bcm6345.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96345GW2 reference board";
-       compatible = "brcm,bcm96345gw2", "brcm,bcm6345";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6345-dynalink-rta770bw.dts b/target/linux/brcm63xx/dts/bcm6345-dynalink-rta770bw.dts
deleted file mode 100644 (file)
index f678762..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/dts-v1/;
-
-#include "bcm6345.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Siemens Gigaset SE515";
-       compatible = "dynalink,rta770bw", "brcm,bcm6345";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb {
-                       label = "RTA770BW:green:usb";
-                       gpios = <&gpio0 7 1>;
-               };
-
-               adsl {
-                       label = "RTA770BW:green:adsl";
-                       gpios = <&gpio0 8 0>;
-               };
-
-               diag {
-                       label = "RTA770BW:green:diag";
-                       gpios = <&gpio0 10 1>;
-               };
-
-               wlan {
-                       label = "RTA770BW:green:wlan";
-                       gpios = <&gpio0 11 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6345-dynalink-rta770w.dts b/target/linux/brcm63xx/dts/bcm6345-dynalink-rta770w.dts
deleted file mode 100644 (file)
index ad0e7ce..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/dts-v1/;
-
-#include "bcm6345.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Dynalink RTA770W";
-       compatible = "dynalink,rta770w", "brcm,bcm6345";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb {
-                       label = "RTA770W:green:usb";
-                       gpios = <&gpio0 7 1>;
-               };
-
-               adsl {
-                       label = "RTA770W:green:adsl";
-                       gpios = <&gpio0 8 0>;
-               };
-
-               diag {
-                       label = "RTA770W:green:diag";
-                       gpios = <&gpio0 10 1>;
-               };
-
-               wlan {
-                       label = "RTA770W:green:wlan";
-                       gpios = <&gpio0 11 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6345.dtsi b/target/linux/brcm63xx/dts/bcm6345.dtsi
deleted file mode 100644 (file)
index 7d5f79b..0000000
+++ /dev/null
@@ -1,94 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6345";
-
-       aliases {
-               pflash = &pflash;
-               serial0 = &uart0;
-               gpio0 = &gpio0;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips32", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       pflash: nor@1fc00000 {
-               compatible = "cfi-flash";
-               reg = <0x1fc00000 0x400000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               status = "disabled";
-       };
-
-       ubus@fff00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-
-               periph_intc: interrupt-controller@fffe000c {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0xfffe000c 0x9>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               ext_intc: interrupt-controller@fffe0014 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfffe0014 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <3>, <4>, <5>, <6>;
-               };
-
-               uart0: serial@fffe0300 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfffe0300 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               gpio0: gpio-controller@fffe0404 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xfffe0404 4>, <0xfffe0408 4>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ngpios = <16>;
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-asmax-ar-1004g.dts b/target/linux/brcm63xx/dts/bcm6348-asmax-ar-1004g.dts
deleted file mode 100644 (file)
index bf7b4a3..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "ASMAX AR 1004g";
-       compatible = "asmax,ar-1004g", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "AR1004G:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               inet_green {
-                       label = "AR1004G:green:inet";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_red {
-                       label = "AR1004G:red:power";
-                       gpios = <&pinctrl 6 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_ext_mii &pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-belkin-f5d7633.dts b/target/linux/brcm63xx/dts/bcm6348-belkin-f5d7633.dts
deleted file mode 100644 (file)
index c39247d..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Belkin F5D7633";
-       compatible = "belkin,f5d7633", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 6 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW-10:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW-10:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW-10:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW-10:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW-10:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0x3c0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3e0000 {
-                       label = "nvram";
-                       reg = <0x3e0000 0x020000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts b/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-10.dts
deleted file mode 100644 (file)
index 014fd3f..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96348GW-10 reference board";
-       compatible = "brcm,bcm96348gw-10", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 6 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW-10:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW-10:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW-10:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW-10:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW-10:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts b/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts
deleted file mode 100644 (file)
index aeda3c2..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96348GW-11 reference board";
-       compatible = "brcm,bcm96348gw-11", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW-11:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW-11:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW-11:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW-11:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW-11:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw.dts b/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348gw.dts
deleted file mode 100644 (file)
index 61a0a3d..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96348GW reference board";
-       compatible = "brcm,bcm96348gw", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348r.dts b/target/linux/brcm63xx/dts/bcm6348-brcm-bcm96348r.dts
deleted file mode 100644 (file)
index 20c88c4..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom 96348R reference board";
-       compatible = "brcm,bcm96348r", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348R:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348R:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348R:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348R:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348R:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-bt-voyager-2110.dts b/target/linux/brcm63xx/dts/bcm6348-bt-voyager-2110.dts
deleted file mode 100644 (file)
index 1eac7e3..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "BT Voyager 2110";
-       compatible = "bt,voyager-2110", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "V2110:green:power";
-                       gpios = <&pinctrl 0 1>;
-               };
-               power_red {
-                       label = "V2110:red:power";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_green {
-                       label = "V2110:green:adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "V2110:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               wireless_green {
-                       label = "V2110:green:wireless";
-                       gpios = <&pinctrl 6 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts b/target/linux/brcm63xx/dts/bcm6348-bt-voyager-2500v-bb.dts
deleted file mode 100644 (file)
index 0975cff..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "BT Voyager 2500V";
-       compatible = "bt,voyager-2500v-bb", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 31 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "V2500V_BB:green:power";
-                       gpios = <&pinctrl 0 1>;
-               };
-               power_red {
-                       label = "V2500V_BB:red:power";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_green {
-                       label = "V2500V_BB:green:adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "V2500V_BB:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               wireless_green {
-                       label = "V2500V_BB:green:wireless";
-                       gpios = <&pinctrl 6 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-comtrend-ct-5365.dts b/target/linux/brcm63xx/dts/bcm6348-comtrend-ct-5365.dts
deleted file mode 100644 (file)
index 0d36aa2..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend CT-5365";
-       compatible = "comtrend,ct-5365", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348A-122:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               alarm_red {
-                       label = "96348A-122:red:alarm";
-                       gpios = <&pinctrl 2 1>;
-               };
-               wps_green {
-                       label = "96348A-122:green:wps";
-                       gpios = <&pinctrl 6 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-comtrend-ct-536plus.dts b/target/linux/brcm63xx/dts/bcm6348-comtrend-ct-536plus.dts
deleted file mode 100644 (file)
index ead9bc3..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend CT-536+/CT-5621T";
-       compatible = "comtrend,ct-536plus", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "CT536_CT5621:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               adsl_fail_green {
-                       label = "CT536_CT5621:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts b/target/linux/brcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts
deleted file mode 100644 (file)
index 4213822..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2640B rev B2";
-       compatible = "d-link,dsl-2640b-b", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 7 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "D-4P-W:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               status {
-                       label = "D-4P-W::status";
-                       gpios = <&pinctrl 3 1>;
-               };
-               inet_green {
-                       label = "D-4P-W:green:internet";
-                       gpios = <&pinctrl 4 1>;
-               };
-               inet_red {
-                       label = "D-4P-W:red:internet";
-                       gpios = <&pinctrl 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-davolink-dv-201amr.dts b/target/linux/brcm63xx/dts/bcm6348-davolink-dv-201amr.dts
deleted file mode 100644 (file)
index 6cafc89..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Davolink DV-201AMR";
-       compatible = "davolink,dv-201amr", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               backup@0 {
-                       label = "backup";
-                       reg = <0x000000 0x400000>;
-               };
-
-               cfe@400000 {
-                       label = "cfe";
-                       reg = <0x400000 0x010000>;
-                       read-only;
-               };
-
-               linux@410000 {
-                       label = "linux";
-                       reg = <0x410000 0x3f0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-dynalink-rta1025w.dts b/target/linux/brcm63xx/dts/bcm6348-dynalink-rta1025w.dts
deleted file mode 100644 (file)
index 122e049..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Dynalink RTA1025W";
-       compatible = "dynalink,rta1025w", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-inventel-livebox-1.dts b/target/linux/brcm63xx/dts/bcm6348-inventel-livebox-1.dts
deleted file mode 100644 (file)
index 6e80675..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Inventel Livebox 1";
-       compatible = "inventel,livebox-1", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               button1 {
-                       label = "1";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               button2 {
-                       label = "2";
-                       gpios = <&pinctrl 7 1>;
-                       linux,code = <BTN_2>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               red_adsl_fail {
-                       label = "Livebox1:red:adsl-fail-power";
-                       gpios = <&pinctrl 0 0>;
-                       default-state = "on";
-               };
-
-               red_adsl {
-                       label = "Livebox1:red:adsl";
-                       gpios = <&pinctrl 1 0>;
-               };
-
-               red_traffic {
-                       label = "Livebox1:red:traffic";
-                       gpios = <&pinctrl 2 0>;
-               };
-
-               red_phone {
-                       label = "Livebox1:red:phone";
-                       gpios = <&pinctrl 3 0>;
-               };
-
-               red_wifi {
-                       label = "Livebox1:red:wifi";
-                       gpios = <&pinctrl 4 0>;
-               };
-       };
-};
-
-&pflash {
-       reg = <0x1e400000 0x800000>;
-       status = "ok";
-
-       partitions {
-               compatible = "ecoscentric,redboot-fis-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-netgear-dg834g-v4.dts b/target/linux/brcm63xx/dts/bcm6348-netgear-dg834g-v4.dts
deleted file mode 100644 (file)
index 4ea096e..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear DG834G v4";
-       compatible = "netgear,dg834g-v4", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 6 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348W3:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               status {
-                       label = "96348W3:red:power";
-                       gpios = <&pinctrl 1 1>;
-               };
-               inet_green {
-                       label = "96348W3::adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_red {
-                       label = "96348W3::internet";
-                       gpios = <&pinctrl 3 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts b/target/linux/brcm63xx/dts/bcm6348-netgear-dg834gt-pn.dts
deleted file mode 100644 (file)
index f7e2032..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear DG834GT/PN";
-       compatible = "netgear,dg834gt-pn", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 6 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW-10:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW-10:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW-10:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW-10:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW-10:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-sagem-fast-2404.dts b/target/linux/brcm63xx/dts/bcm6348-sagem-fast-2404.dts
deleted file mode 100644 (file)
index 945fcc1..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sagem F@st 2404";
-       compatible = "sagem,fast-2404", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-sagem-fast-2604.dts b/target/linux/brcm63xx/dts/bcm6348-sagem-fast-2604.dts
deleted file mode 100644 (file)
index a2d2717..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sagem F@st 2604";
-       compatible = "sagem,fast-2604", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "F@ST2604:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "F@ST2604:red:power";
-                       gpios = <&pinctrl 1 1>;
-               };
-               inet_red {
-                       label = "F@ST2604:red:inet";
-                       gpios = <&pinctrl 4 1>;
-               };
-               wps_green {
-                       label = "F@ST2604:green:wps";
-                       gpios = <&pinctrl 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts b/target/linux/brcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts
deleted file mode 100644 (file)
index 8b0d1ca..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "T-Com Speedport W 500V";
-       compatible = "t-com,speedport-w-500v", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "SPW500V:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "SPW500V:red:power";
-                       gpios = <&pinctrl 1 1>;
-               };
-               ppp_green {
-                       label = "SPW500V:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               pstn_green {
-                       label = "SPW500V:green:pstn";
-                       gpios = <&pinctrl 28 1>;
-               };
-               voip_green {
-                       label = "SPW500V:green:voip";
-                       gpios = <&pinctrl 32 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-tecom-gw6000.dts b/target/linux/brcm63xx/dts/bcm6348-tecom-gw6000.dts
deleted file mode 100644 (file)
index 4822b04..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "TECOM GW6000";
-       compatible = "tecom,gw6000", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-tecom-gw6200.dts b/target/linux/brcm63xx/dts/bcm6348-tecom-gw6200.dts
deleted file mode 100644 (file)
index c86cbf9..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "TECOM GW6200";
-       compatible = "tecom,gw6200", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               line1_green {
-                       label = "GW6200:green:line1";
-                       gpios = <&pinctrl 4 1>;
-               };
-               line2_green {
-                       label = "GW6200:green:line2";
-                       gpios = <&pinctrl 5 1>;
-               };
-               line3_green {
-                       label = "GW6200:green:line3";
-                       gpios = <&pinctrl 6 1>;
-               };
-               tel_green {
-                       label = "GW6200:green:tel";
-                       gpios = <&pinctrl 7 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-telsey-cpva502plus.dts b/target/linux/brcm63xx/dts/bcm6348-telsey-cpva502plus.dts
deleted file mode 100644 (file)
index 71620bc..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Telsey CPVA502+";
-       compatible = "telsey,cpva502plus", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               phone_green {
-                       label = "CPVA502+:green:phone";
-                       gpios = <&pinctrl 0 1>;
-               };
-
-               link_amber {
-                       label = "CPVA502+:amber:link";
-                       gpios = <&pinctrl 5 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-telsey-magic.dts b/target/linux/brcm63xx/dts/bcm6348-telsey-magic.dts
deleted file mode 100644 (file)
index 1358ebe..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Alice W-Gate";
-       compatible = "telsey,magic", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power {
-                       label = "MAGIC:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-
-               stop {
-                       label = "MAGIC:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-
-               hpna {
-                       label = "MAGIC:green:hpna";
-                       gpios = <&pinctrl 4 1>;
-               };
-
-               status {
-                       label = "MAGIC:green:adsl";
-                       gpios = <&pinctrl 5 1>;
-               };
-
-               voip {
-                       label = "MAGIC:green:voip";
-                       gpios = <&pinctrl 22 1>;
-               };
-
-               wifi {
-                       label = "MAGIC:green:wifi";
-                       gpios = <&pinctrl 28 0>;
-               };
-
-               usb {
-                       label = "MAGIC:green:usb";
-                       gpios = <&pinctrl 35 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts b/target/linux/brcm63xx/dts/bcm6348-tp-link-td-w8900gb.dts
deleted file mode 100644 (file)
index be111ed..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "TP-Link TD-W8900GB";
-       compatible = "tp-link,td-w8900gb", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 33 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96348GW-11:green:power";
-                       gpios = <&pinctrl 0 1>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96348GW-11:green:stop";
-                       gpios = <&pinctrl 1 1>;
-               };
-               adsl_fail_green {
-                       label = "96348GW-11:green:adsl-fail";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96348GW-11:green:ppp";
-                       gpios = <&pinctrl 3 1>;
-               };
-               ppp_fail_green {
-                       label = "96348GW-11:green:ppp-fail";
-                       gpios = <&pinctrl 4 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0x3d0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3e0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348-usrobotics-usr9108.dts b/target/linux/brcm63xx/dts/bcm6348-usrobotics-usr9108.dts
deleted file mode 100644 (file)
index 366eaf3..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/dts-v1/;
-
-#include "bcm6348.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "USRobotics USR9108";
-       compatible = "usrobotics,usr9108", "brcm,bcm6348";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb {
-                       label = "96348GW-A::usb";
-                       gpios = <&pinctrl 0 1>;
-               };
-               dsl {
-                       label = "96348GW-A::adsl";
-                       gpios = <&pinctrl 3 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6348.dtsi b/target/linux/brcm63xx/dts/bcm6348.dtsi
deleted file mode 100644 (file)
index f3e17be..0000000
+++ /dev/null
@@ -1,153 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6348";
-
-       aliases {
-               pflash = &pflash;
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               spi0 = &lsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips3300", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       pflash: nor@1fc00000 {
-               compatible = "cfi-flash";
-               reg = <0x1fc00000 0x400000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               status = "disabled";
-       };
-
-       ubus@fff00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               periph_intc: interrupt-controller@fffe000c {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0xfffe000c 0x8>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               ext_intc: interrupt-controller@fffe0014 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfffe0014 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <3>, <4>, <5>, <6>;
-
-                       brcm,field-width = <5>;
-               };
-
-               pinctrl: pin-controller@fffe0400 {
-                       compatible = "brcm,bcm6348-pinctrl";
-                       reg = <0xfffe0400 0x8>,
-                             <0xfffe0408 0x8>,
-                             <0xfffe0418 0x4>;
-                       reg-names = "dirout", "dat", "mode";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&ext_intc>;
-                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
-                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
-
-                       pinctrl_ext_ephy: ext_ephy {
-                               function = "ext_ephy";
-                               groups = "group1", "group4";
-                       };
-
-                       pinctrl_mii_snoop: mii_snoop {
-                               function = "ext_ephy";
-                               groups = "group1", "group4";
-                       };
-
-                       pinctrl_legacy_led: legacy_led {
-                               function = "legacy_led";
-                               groups = "group4";
-                       };
-
-                       pinctrl_mii_pccard: mii_pccard {
-                               function = "mii_pccard";
-                               groups = "group1";
-                       };
-
-                       pinctrl_pci: pci {
-                               function = "pci";
-                               groups = "group2";
-                       };
-
-                       pinctrl_spi_master_uart: spi_master_uart {
-                               function = "spi_master_uart";
-                               groups = "group1";
-                       };
-
-                       pinctrl_ext_mii: ext_mii {
-                               function = "ext_mii";
-                               groups = "group0", "group3";
-                       };
-
-                       pinctrl_utopia: utopia {
-                               function = "utopia";
-                               groups = "group0", "group1", "group3";
-                       };
-               };
-
-               uart0: serial@fffe0300 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfffe0300 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@fffe0c00 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6348-spi";
-                       reg = <0xfffe0c00 0x40>;
-                       interrupts = <1>;
-                       /* clocks = <&clkctl 9>; */
-
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-alcatel-rg100a.dts b/target/linux/brcm63xx/dts/bcm6358-alcatel-rg100a.dts
deleted file mode 100644 (file)
index 22f50d5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Alcatel RG100A";
-       compatible = "alcatel,rg100a", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               stop_green {
-                       label = "96358VW2:green:stop";
-                       gpios = <&pinctrl 4 1>;
-               };
-               power_green {
-                       label = "96358VW2:green:power";
-                       gpios = <&pinctrl 5 1>;
-                       default-state = "on";
-               };
-               adsl_green {
-                       label = "96358VW2:green:adsl";
-                       gpios = <&pinctrl 22 1>;
-               };
-               ppp_fail_green {
-                       label = "96358VW2:green:ppp-fail";
-                       gpios = <&pinctrl 23 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw.dts b/target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw.dts
deleted file mode 100644 (file)
index 669d194..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96358VW reference board";
-       compatible = "brcm,bcm96358vw", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "96358VW:green:power";
-                       gpios = <&pinctrl 4 0>;
-                       default-state = "on";
-               };
-               stop_green {
-                       label = "96358VW:green:stop";
-                       gpios = <&pinctrl 5 0>;
-               };
-               adsl_fail_green {
-                       label = "96358VW:green:adsl-fail";
-                       gpios = <&pinctrl 15 1>;
-               };
-               ppp_green {
-                       label = "96358VW:green:ppp";
-                       gpios = <&pinctrl 22 1>;
-               };
-               ppp_fail_green {
-                       label = "96358VW:green:ppp-fail";
-                       gpios = <&pinctrl 23 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts b/target/linux/brcm63xx/dts/bcm6358-brcm-bcm96358vw2.dts
deleted file mode 100644 (file)
index a4a977e..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96358VW2 reference board";
-       compatible = "brcm,bcm96358vw2", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               stop_green {
-                       label = "96358VW2:green:stop";
-                       gpios = <&pinctrl 4 1>;
-               };
-               power_green {
-                       label = "96358VW2:green:power";
-                       gpios = <&pinctrl 5 1>;
-                       default-state = "on";
-               };
-               adsl_green {
-                       label = "96358VW2:green:adsl";
-                       gpios = <&pinctrl 22 1>;
-               };
-               ppp_fail_green {
-                       label = "96358VW2:green:ppp-fail";
-                       gpios = <&pinctrl 23 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-bt-home-hub-2-a.dts b/target/linux/brcm63xx/dts/bcm6358-bt-home-hub-2-a.dts
deleted file mode 100644 (file)
index 351b294..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "BT Home Hub 2.0 Type A";
-       compatible = "bt,home-hub-2-a", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               phone {
-                       label = "phone";
-                       gpios = <&pinctrl 1 1>;
-                       linux,code = <KEY_PHONE>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 9 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 11 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&leds {
-       status = "ok";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_serial_led>;
-
-       led@0 {
-               reg = <0>;
-               active-low;
-               label = "HOMEHUB2A:red:power";
-       };
-
-       led@1 {
-               reg = <0>;
-               active-low;
-               label = "HOMEHUB2A:green:power";
-               default-state = "on";
-       };
-
-       led@2 {
-               reg = <2>;
-               active-low;
-               label = "HOMEHUB2A:blue:power";
-       };
-
-       led@3 {
-               reg = <3>;
-               active-low;
-               label = "HOMEHUB2A:red:broadband";
-       };
-
-       led@4 {
-               reg = <4>;
-               active-low;
-               label = "HOMEHUB2A:green:broadband";
-       };
-
-       led@5 {
-               reg = <5>;
-               active-low;
-               label = "HOMEHUB2A:blue:broadband";
-       };
-
-       led@6 {
-               reg = <6>;
-               active-low;
-               label = "HOMEHUB2A:red:wireless";
-       };
-
-       led@7 {
-               reg = <7>;
-               active-low;
-               label = "HOMEHUB2A:green:wireless";
-       };
-
-       led@8 {
-               reg = <8>;
-               active-low;
-               label = "HOMEHUB2A:blue:wireless";
-       };
-
-       led@9 {
-               reg = <9>;
-               active-low;
-               label = "HOMEHUB2A:red:phone";
-       };
-
-       led@10 {
-               reg = <10>;
-               active-low;
-               label = "HOMEHUB2A:green:phone";
-       };
-
-       led@11 {
-               reg = <11>;
-               active-low;
-               label = "HOMEHUB2A:blue:phone";
-       };
-
-       led@12 {
-               reg = <12>;
-               active-low;
-               label = "HOMEHUB2A:red:upgrading";
-       };
-
-       led@13 {
-               reg = <13>;
-               active-low;
-               label = "HOMEHUB2A:green:upgrading";
-       };
-
-       led@14 {
-               reg = <14>;
-               active-low;
-               label = "HOMEHUB2A:blue:upgrading";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-comtrend-ct-6373.dts b/target/linux/brcm63xx/dts/bcm6358-comtrend-ct-6373.dts
deleted file mode 100644 (file)
index c5e38ba..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend CT-6373";
-       compatible = "comtrend,ct-6373", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "CT6373-1:green:power";
-                       gpios = <&pinctrl 0 0>;
-                       default-state = "on";
-               };
-               usb_green {
-                       label = "CT6373-1:green:usb";
-                       gpios = <&pinctrl 3 1>;
-               };
-               wlan_green {
-                       label = "CT6373-1:green:wlan";
-                       gpios = <&pinctrl 9 1>;
-               };
-       };
-};
-
-&leds {
-       status = "ok";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_serial_led>;
-
-       led@0 {
-               reg = <0>;
-               active-low;
-               label = "CT6373-1:green:adsl";
-       };
-
-       led@1 {
-               reg = <1>;
-               active-low;
-               label = "CT6373-1:green:line";
-       };
-
-       led@2 {
-               reg = <2>;
-               active-low;
-               label = "CT6373-1:green:fxs1";
-       };
-
-       led@3 {
-               reg = <3>;
-               active-low;
-               label = "CT6373-1:green:fxs2";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-d-link-dsl-2650u.dts b/target/linux/brcm63xx/dts/bcm6358-d-link-dsl-2650u.dts
deleted file mode 100644 (file)
index c2dad26..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2650U";
-       compatible = "d-link,dsl-2650u", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               stop_green {
-                       label = "96358VW2:green:stop";
-                       gpios = <&pinctrl 4 1>;
-               };
-               power_green {
-                       label = "96358VW2:green:power";
-                       gpios = <&pinctrl 5 1>;
-                       default-state = "on";
-               };
-               adsl_green {
-                       label = "96358VW2:green:adsl";
-                       gpios = <&pinctrl 22 1>;
-               };
-               ppp_fail_green {
-                       label = "96358VW2:green:ppp-fail";
-                       gpios = <&pinctrl 23 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts b/target/linux/brcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts
deleted file mode 100644 (file)
index 6897378..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DSL-2740B/DSL-2741B rev C2/3";
-       compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_green {
-                       label = "dsl-274xb:green:internet";
-                       gpios = <&pinctrl 2 0>;
-               };
-               power_red {
-                       label = "dsl-274xb:red:power";
-                       gpios = <&pinctrl 4 1>;
-               };
-               power_green {
-                       label = "dsl-274xb:green:power";
-                       gpios = <&pinctrl 5 1>;
-                       default-state = "on";
-               };
-               dsl_green {
-                       label = "dsl-274xb:green:adsl";
-                       gpios = <&pinctrl 9 1>;
-               };
-               inet_red {
-                       label = "dsl-274xb:red:internet";
-                       gpios = <&pinctrl 10 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts b/target/linux/brcm63xx/dts/bcm6358-d-link-dva-g3810bn-tl.dts
deleted file mode 100644 (file)
index fcf112a..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "D-Link DVA-G3810BN/TL";
-       compatible = "d-link,dva-g3810bn-tl", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               voip {
-                       label = "DVAG3810BN::voip";
-                       gpios = <&pinctrl 1 0>;
-               };
-               power {
-                       label = "DVAG3810BN::power";
-                       gpios = <&pinctrl 4 0>;
-                       default-state = "on";
-               };
-               stop {
-                       label = "DVAG3810BN::stop";
-                       gpios = <&pinctrl 5 0>;
-               };
-               dsl {
-                       label = "DVAG3810BN::dsl";
-                       gpios = <&pinctrl 22 1>;
-               };
-               inet {
-                       label = "DVAG3810BN::internet";
-                       gpios = <&pinctrl 23 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg553.dts b/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg553.dts
deleted file mode 100644 (file)
index d230668..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG553";
-       compatible = "huawei,echolife-hg553", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&pinctrl 9 1>;
-                       linux,code = <KEY_RFKILL>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "HW553:blue:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "HW553:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               hspa_red {
-                       label = "HW553:red:hspa";
-                       gpios = <&pinctrl 12 1>;
-               };
-               hspa_blue {
-                       label = "HW553:blue:hspa";
-                       gpios = <&pinctrl 13 1>;
-               };
-               lan_red {
-                       label = "HW553:red:lan";
-                       gpios = <&pinctrl 22 1>;
-               };
-               lan_blue {
-                       label = "HW553:blue:lan";
-                       gpios = <&pinctrl 23 1>;
-               };
-               wifi_red {
-                       label = "HW553:red:wifi";
-                       gpios = <&pinctrl 25 1>;
-               };
-               dsl_red {
-                       label = "HW553:red:adsl";
-                       gpios = <&pinctrl 34 1>;
-               };
-               dsl_blue {
-                       label = "HW553:blue:adsl";
-                       gpios = <&pinctrl 35 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts b/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts
deleted file mode 100644 (file)
index 1827e8e..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG556a (version A)";
-       compatible = "huawei,echolife-hg556a-a", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               help {
-                       label = "help";
-                       gpios = <&pinctrl 8 1>;
-                       linux,code = <KEY_HELP>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 9 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               restart {
-                       label = "restart";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 11 1>;
-                       linux,code = <KEY_CONFIG>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               message_red {
-                       label = "HW556:red:message";
-                       gpios = <&pinctrl 0 1>;
-               };
-               hspa_red {
-                       label = "HW556:red:hspa";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_red {
-                       label = "HW556:red:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               power_red {
-                       label = "HW556:red:power";
-                       gpios = <&pinctrl 3 1>;
-                       default-state = "on";
-               };
-               all_red {
-                       label = "HW556:red:all";
-                       gpios = <&pinctrl 6 1>;
-                       default-state = "on";
-               };
-               lan1_green {
-                       label = "HW556:green:lan1";
-                       gpios = <&pinctrl 12 1>;
-               };
-               lan1_red {
-                       label = "HW556:red:lan1";
-                       gpios = <&pinctrl 13 1>;
-               };
-               lan2_green {
-                       label = "HW556:green:lan2";
-                       gpios = <&pinctrl 15 1>;
-               };
-               lan2_red {
-                       label = "HW556:red:lan2";
-                       gpios = <&pinctrl 22 1>;
-               };
-               lan3_green {
-                       label = "HW556:green:lan3";
-                       gpios = <&pinctrl 23 1>;
-               };
-               lan3_red {
-                       label = "HW556:red:lan3";
-                       gpios = <&pinctrl 26 1>;
-               };
-               lan4_green {
-                       label = "HW556:green:lan4";
-                       gpios = <&pinctrl 27 1>;
-               };
-               lan4_red {
-                       label = "HW556:red:lan4";
-                       gpios = <&pinctrl 28 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xec0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               cal_data@ee0000 {
-                       label = "cal_data";
-                       reg = <0xee0000 0x100000>;
-                       read-only;
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts b/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts
deleted file mode 100644 (file)
index fa804be..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG556a (version B)";
-       compatible = "huawei,echolife-hg556a-b", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               help {
-                       label = "help";
-                       gpios = <&pinctrl 8 1>;
-                       linux,code = <KEY_HELP>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 9 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               restart {
-                       label = "restart";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 11 1>;
-                       linux,code = <KEY_CONFIG>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               message_red {
-                       label = "HW556:red:message";
-                       gpios = <&pinctrl 0 1>;
-               };
-               hspa_red {
-                       label = "HW556:red:hspa";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_red {
-                       label = "HW556:red:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               power_red {
-                       label = "HW556:red:power";
-                       gpios = <&pinctrl 3 1>;
-                       default-state = "on";
-               };
-               all_red {
-                       label = "HW556:red:all";
-                       gpios = <&pinctrl 6 1>;
-                       default-state = "on";
-               };
-               lan1_green {
-                       label = "HW556:green:lan1";
-                       gpios = <&pinctrl 12 1>;
-               };
-               lan1_red {
-                       label = "HW556:red:lan1";
-                       gpios = <&pinctrl 13 1>;
-               };
-               lan2_green {
-                       label = "HW556:green:lan2";
-                       gpios = <&pinctrl 15 1>;
-               };
-               lan2_red {
-                       label = "HW556:red:lan2";
-                       gpios = <&pinctrl 22 1>;
-               };
-               lan3_green {
-                       label = "HW556:green:lan3";
-                       gpios = <&pinctrl 23 1>;
-               };
-               lan3_red {
-                       label = "HW556:red:lan3";
-                       gpios = <&pinctrl 26 1>;
-               };
-               lan4_green {
-                       label = "HW556:green:lan4";
-                       gpios = <&pinctrl 27 1>;
-               };
-               lan4_red {
-                       label = "HW556:red:lan4";
-                       gpios = <&pinctrl 28 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xec0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               cal_data@ee0000 {
-                       label = "cal_data";
-                       reg = <0xee0000 0x100000>;
-                       read-only;
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts b/target/linux/brcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts
deleted file mode 100644 (file)
index 5ed847b..0000000
+++ /dev/null
@@ -1,141 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG556a (version C)";
-       compatible = "huawei,echolife-hg556a-c", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               help {
-                       label = "help";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_HELP>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 9 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               restart {
-                       label = "restart";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 11 1>;
-                       linux,code = <KEY_CONFIG>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan1_green {
-                       label = "HW556:green:lan1";
-                       gpios = <&pinctrl 0 1>;
-               };
-               lan2_green {
-                       label = "HW556:green:lan2";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_red {
-                       label = "HW556:red:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               power_red {
-                       label = "HW556:red:power";
-                       gpios = <&pinctrl 3 1>;
-                       default-state = "on";
-               };
-               message_red {
-                       label = "HW556:red:message";
-                       gpios = <&pinctrl 12 1>;
-               };
-               lan1_red {
-                       label = "HW556:red:lan1";
-                       gpios = <&pinctrl 13 1>;
-               };
-               hspa_red {
-                       label = "HW556:red:hspa";
-                       gpios = <&pinctrl 15 1>;
-               };
-               lan2_red {
-                       label = "HW556:red:lan2";
-                       gpios = <&pinctrl 22 1>;
-               };
-               lan3_green {
-                       label = "HW556:green:lan3";
-                       gpios = <&pinctrl 23 1>;
-               };
-               lan3_red {
-                       label = "HW556:red:lan3";
-                       gpios = <&pinctrl 26 1>;
-               };
-               lan4_green {
-                       label = "HW556:green:lan4";
-                       gpios = <&pinctrl 27 1>;
-               };
-               lan4_red {
-                       label = "HW556:red:lan4";
-                       gpios = <&pinctrl 28 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xec0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               cal_data@ee0000 {
-                       label = "cal_data";
-                       reg = <0xee0000 0x100000>;
-                       read-only;
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-pirelli-a226g.dts b/target/linux/brcm63xx/dts/bcm6358-pirelli-a226g.dts
deleted file mode 100644 (file)
index 44e297c..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Pirelli A226G";
-       compatible = "pirelli,a226g", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               voip_red {
-                       label = "DWV-S0:red:VoIP";
-                       gpios = <&pinctrl 0 1>;
-               };
-               eth_red {
-                       label = "DWV-S0:red:ethernet";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_green {
-                       label = "DWV-S0:green:ADSL";
-                       gpios = <&pinctrl 2 1>;
-               };
-               usb_green {
-                       label = "DWV-S0:green:USB";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "DWV-S0:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "DWV-S0:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               inet_red {
-                       label = "DWV-S0:red:internet";
-                       gpios = <&pinctrl 6 1>;
-               };
-               inet_green {
-                       label = "DWV-S0:green:internet";
-                       gpios = <&pinctrl 7 1>;
-               };
-               eth_green {
-                       label = "DWV-S0:green:ethernet";
-                       gpios = <&pinctrl 8 1>;
-               };
-               voip_green {
-                       label = "DWV-S0:green:VoIP";
-                       gpios = <&pinctrl 9 1>;
-               };
-               wifi_red {
-                       label = "DWV-S0:red:wifi";
-                       gpios = <&pinctrl 10 1>;
-               };
-               usb_red {
-                       label = "DWV-S0:red:USB";
-                       gpios = <&pinctrl 11 1>;
-               };
-               dsl_red {
-                       label = "DWV-S0:red:ADSL";
-                       gpios = <&pinctrl 12 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts b/target/linux/brcm63xx/dts/bcm6358-pirelli-a226m-fwb.dts
deleted file mode 100644 (file)
index bb1cd29..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Pirelli A226M-FWB";
-       compatible = "pirelli,a226m-fwb", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               voip_red {
-                       label = "DWV-S0:red:VoIP";
-                       gpios = <&pinctrl 0 1>;
-               };
-               eth_red {
-                       label = "DWV-S0:red:ethernet";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_green {
-                       label = "DWV-S0:green:ADSL";
-                       gpios = <&pinctrl 2 1>;
-               };
-               usb_green {
-                       label = "DWV-S0:green:USB";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "DWV-S0:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "DWV-S0:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               inet_red {
-                       label = "DWV-S0:red:internet";
-                       gpios = <&pinctrl 6 1>;
-               };
-               inet_green {
-                       label = "DWV-S0:green:internet";
-                       gpios = <&pinctrl 7 1>;
-               };
-               eth_green {
-                       label = "DWV-S0:green:ethernet";
-                       gpios = <&pinctrl 8 1>;
-               };
-               voip_green {
-                       label = "DWV-S0:green:VoIP";
-                       gpios = <&pinctrl 9 1>;
-               };
-               wifi_red {
-                       label = "DWV-S0:red:wifi";
-                       gpios = <&pinctrl 10 1>;
-               };
-               usb_red {
-                       label = "DWV-S0:red:USB";
-                       gpios = <&pinctrl 11 1>;
-               };
-               dsl_red {
-                       label = "DWV-S0:red:ADSL";
-                       gpios = <&pinctrl 12 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-pirelli-a226m.dts b/target/linux/brcm63xx/dts/bcm6358-pirelli-a226m.dts
deleted file mode 100644 (file)
index e0a6b07..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Pirelli A226M";
-       compatible = "pirelli,a226m", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               voip_red {
-                       label = "DWV-S0:red:VoIP";
-                       gpios = <&pinctrl 0 1>;
-               };
-               eth_red {
-                       label = "DWV-S0:red:ethernet";
-                       gpios = <&pinctrl 1 1>;
-               };
-               dsl_green {
-                       label = "DWV-S0:green:ADSL";
-                       gpios = <&pinctrl 2 1>;
-               };
-               usb_green {
-                       label = "DWV-S0:green:USB";
-                       gpios = <&pinctrl 3 1>;
-               };
-               power_green {
-                       label = "DWV-S0:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "DWV-S0:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               inet_red {
-                       label = "DWV-S0:red:internet";
-                       gpios = <&pinctrl 6 1>;
-               };
-               inet_green {
-                       label = "DWV-S0:green:internet";
-                       gpios = <&pinctrl 7 1>;
-               };
-               eth_green {
-                       label = "DWV-S0:green:ethernet";
-                       gpios = <&pinctrl 8 1>;
-               };
-               voip_green {
-                       label = "DWV-S0:green:VoIP";
-                       gpios = <&pinctrl 9 1>;
-               };
-               wifi_red {
-                       label = "DWV-S0:red:wifi";
-                       gpios = <&pinctrl 10 1>;
-               };
-               usb_red {
-                       label = "DWV-S0:red:USB";
-                       gpios = <&pinctrl 11 1>;
-               };
-               dsl_red {
-                       label = "DWV-S0:red:ADSL";
-                       gpios = <&pinctrl 12 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-pirelli-agpf-s0.dts b/target/linux/brcm63xx/dts/bcm6358-pirelli-agpf-s0.dts
deleted file mode 100644 (file)
index 0b9c397..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Pirelli Alice Gate AGPF-S0";
-       compatible = "pirelli,agpf-s0", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "AGPF-S0:green:power";
-                       gpios = <&pinctrl 4 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "AGPF-S0:red:power";
-                       gpios = <&pinctrl 5 1>;
-               };
-               service_green {
-                       label = "AGPF-S0:green:service";
-                       gpios = <&pinctrl 6 1>;
-               };
-               service_red {
-                       label = "AGPF-S0:red:service";
-                       gpios = <&pinctrl 7 1>;
-               };
-               dsl_green {
-                       label = "AGPF-S0:green:adsl";
-                       gpios = <&pinctrl 9 1>;
-               };
-               dsl_red {
-                       label = "AGPF-S0:red:adsl";
-                       gpios = <&pinctrl 10 1>;
-               };
-               wifi_green {
-                       label = "AGPF-S0:green:wifi";
-                       gpios = <&pinctrl 22 1>;
-               };
-               wifi_red {
-                       label = "AGPF-S0:red:wifi";
-                       gpios = <&pinctrl 23 1>;
-               };
-               inet_red {
-                       label = "AGPF-S0:red:internet";
-                       gpios = <&pinctrl 24 1>;
-               };
-               inet_green {
-                       label = "AGPF-S0:green:internet";
-                       gpios = <&pinctrl 25 1>;
-               };
-               usr1_green {
-                       label = "AGPF-S0:green:usr1";
-                       gpios = <&pinctrl 26 1>;
-               };
-               usr1_red {
-                       label = "AGPF-S0:red:usr1";
-                       gpios = <&pinctrl 27 1>;
-               };
-               usr2_green {
-                       label = "AGPF-S0:green:usr2";
-                       gpios = <&pinctrl 29 1>;
-               };
-               usr2_red {
-                       label = "AGPF-S0:red:usr2";
-                       gpios = <&pinctrl 30 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts b/target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-foxconn-r1.dts
deleted file mode 100644 (file)
index de22658..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "SFR Neufbox 4 (Foxconn)";
-       compatible = "sfr,neufbox-4-foxconn-r1", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               service {
-                       label = "service";
-                       gpios = <&pinctrl 27 1>;
-                       linux,code = <BTN_0>;
-                       debounce-interval = <60>;
-               };
-
-               clip {
-                       label = "clip";
-                       gpios = <&pinctrl 31 1>;
-                       linux,code = <BTN_1>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               traffic_white {
-                       label = "NB4-FXC-r1:white:traffic";
-                       gpios = <&pinctrl 2 0>;
-               };
-               service_blue {
-                       label = "NB4-FXC-r1:blue:service";
-                       gpios = <&pinctrl 4 0>;
-               };
-               wifi_white {
-                       label = "NB4-FXC-r1:white:wifi";
-                       gpios = <&pinctrl 15 0>;
-               };
-               service_red {
-                       label = "NB4-FXC-r1:red:service";
-                       gpios = <&pinctrl 29 0>;
-               };
-               service_green {
-                       label = "NB4-FXC-r1:green:service";
-                       gpios = <&pinctrl 30 0>;
-               };
-       };
-};
-
-&leds {
-       status = "ok";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_serial_led>;
-
-       led@0 {
-               reg = <0>;
-               active-low;
-               label = "NB4-FXC-r1:white:alarm";
-       };
-
-       led@2 {
-               reg = <2>;
-               active-low;
-               label = "NB4-FXC-r1:white:tv";
-       };
-
-       led@3 {
-               reg = <3>;
-               active-low;
-               label = "NB4-FXC-r1:white:tel";
-       };
-
-       led@4 {
-               reg = <4>;
-               active-low;
-               label = "NB4-FXC-r1:white:adsl";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts b/target/linux/brcm63xx/dts/bcm6358-sfr-neufbox-4-sercomm-r0.dts
deleted file mode 100644 (file)
index db6c5f3..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "SFR Neufbox 4 (Sercomm)";
-       compatible = "sfr,neufbox-4-sercomm-r0", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               service {
-                       label = "service";
-                       gpios = <&pinctrl 27 1>;
-                       linux,code = <BTN_0>;
-                       debounce-interval = <60>;
-               };
-
-               clip {
-                       label = "clip";
-                       gpios = <&pinctrl 31 1>;
-                       linux,code = <BTN_1>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               traffic_white {
-                       label = "NB4-SER-r0:white:traffic";
-                       gpios = <&pinctrl 2 1>;
-               };
-               service_blue {
-                       label = "NB4-SER-r0:blue:service";
-                       gpios = <&pinctrl 4 1>;
-               };
-               wifi_white {
-                       label = "NB4-SER-r0:white:wifi";
-                       gpios = <&pinctrl 15 1>;
-               };
-               service_red {
-                       label = "NB4-SER-r0:red:service";
-                       gpios = <&pinctrl 29 1>;
-               };
-               service_green {
-                       label = "NB4-SER-r0:green:service";
-                       gpios = <&pinctrl 30 1>;
-               };
-       };
-};
-
-&leds {
-       status = "ok";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_serial_led>;
-
-       led@0 {
-               reg = <0>;
-               active-low;
-               label = "NB4-SER-r0:white:alarm";
-       };
-
-       led@2 {
-               reg = <2>;
-               active-low;
-               label = "NB4-SER-r0:white:tv";
-       };
-
-       led@3 {
-               reg = <3>;
-               active-low;
-               label = "NB4-SER-r0:white:tel";
-       };
-
-       led@4 {
-               reg = <4>;
-               active-low;
-               label = "NB4-SER-r0:white:adsl";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts b/target/linux/brcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts
deleted file mode 100644 (file)
index 4aed5f0..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "T-Com Speedport W 303V";
-       compatible = "t-com,speedport-w-303v", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 11 0>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               ses {
-                       label = "ses";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               ses_green {
-                       label = "spw303v:green:ses";
-                       gpios = <&pinctrl 0 1>;
-               };
-               power_adsl_red {
-                       label = "spw303v:red:power+adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "spw303v:green:ppp";
-                       gpios = <&pinctrl 5 1>;
-               };
-               power_adsl_green {
-                       label = "spw303v:green:power+adsl";
-                       gpios = <&pinctrl 22 1>;
-                       default-state = "on";
-               };
-               voip_green {
-                       label = "spw303v:green:voip";
-                       gpios = <&pinctrl 27 1>;
-               };
-               pots_green {
-                       label = "spw303v:green:pots";
-                       gpios = <&pinctrl 31 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358-telsey-cpva642.dts b/target/linux/brcm63xx/dts/bcm6358-telsey-cpva642.dts
deleted file mode 100644 (file)
index e422912..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Telsey CPVA642-type (CPA-ZNTE60T)";
-       compatible = "telsey,cpva642", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 37 0>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               eth_green {
-                       label = "CPVA642:green:ether";
-                       gpios = <&pinctrl 1 1>;
-               };
-               phone2_green {
-                       label = "CPVA642:green:phone2";
-                       gpios = <&pinctrl 2 1>;
-               };
-               usb_green {
-                       label = "CPVA642:green:usb";
-                       gpios = <&pinctrl 3 1>;
-               };
-               phone1_green {
-                       label = "CPVA642:green:phone1";
-                       gpios = <&pinctrl 4 1>;
-               };
-               wifi_red {
-                       label = "CPVA642:red:wifi";
-                       gpios = <&pinctrl 6 1>;
-               };
-               link_red {
-                       label = "CPVA642:red:link";
-                       gpios = <&pinctrl 9 1>;
-               };
-               link_green {
-                       label = "CPVA642:green:link";
-                       gpios = <&pinctrl 10 1>;
-               };
-               power_green {
-                       label = "CPVA642:green:power";
-                       gpios = <&pinctrl 11 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "CPVA642:red:power";
-                       gpios = <&pinctrl 14 1>;
-               };
-               wifi_green {
-                       label = "CPVA642:green:wifi";
-                       gpios = <&pinctrl 28 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6358.dtsi b/target/linux/brcm63xx/dts/bcm6358.dtsi
deleted file mode 100644 (file)
index a78cdef..0000000
+++ /dev/null
@@ -1,203 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6358";
-
-       aliases {
-               pflash = &pflash;
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi0 = &lsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       pflash: nor@1e000000 {
-               compatible = "cfi-flash";
-               reg = <0x1e000000 0x2000000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               status = "disabled";
-       };
-
-       ubus@fff00000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               periph_intc: interrupt-controller@fffe000c {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0xfffe000c 0x8>,
-                             <0xfffe0038 0x8>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>, <3>;
-               };
-
-               ext_intc0: interrupt-controller@fffe0014 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfffe0014 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <25>, <26>, <27>, <28>;
-               };
-
-               ext_intc1: interrupt-controller@fffe001c {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0xfffe001c 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <20>, <21>;
-               };
-
-               pinctrl: pin-controller@fffe0080 {
-                       compatible = "brcm,bcm6358-pinctrl";
-                       reg = <0xfffe0080 0x8>,
-                             <0xfffe0088 0x8>;
-                       reg-names = "dirout", "dat", "mode";
-                       brcm,gpiomode = <&gpiomode>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupts-extended = <&ext_intc1 0 0>,
-                                             <&ext_intc1 1 0>,
-                                             <&ext_intc0 0 0>,
-                                             <&ext_intc0 1 0>,
-                                             <&ext_intc0 2 0>,
-                                             <&ext_intc0 3 0>;
-                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
-                                         "gpio36", "gpio37";
-
-                       pinctrl_ebi_cs: ebi_cs {
-                               function = "ebi_cs";
-                               groups = "ebi_cs_grp";
-                       };
-
-                       pinctrl_uart1: uart1 {
-                               function = "uart1";
-                               groups = "uart1_grp";
-                       };
-
-                       pinctrl_serial_led: serial_led {
-                               function = "serial_led";
-                               groups = "serial_led_grp";
-                       };
-
-                       pinctrl_legacy_led: legacy_led {
-                               function = "legacy_led";
-                               groups = "legacy_led_grp";
-                       };
-
-                       pinctrl_led: led {
-                               function = "led";
-                               groups = "led_grp";
-                       };
-
-                       pinctrl_spi_cs_23: spi_cs {
-                               function = "spi_cs";
-                               groups = "spi_cs_grp";
-                       };
-
-                       pinctrl_utopia: utopia {
-                               function = "utopia";
-                               groups = "utopia_grp";
-                       };
-
-                       pinctrl_pwm_syn_clk: pwm_syn_clk {
-                               function = "pwm_syn_clk";
-                               groups = "pwm_syn_clk_grp";
-                       };
-
-                       pinctrl_sys_irq: sys_irq {
-                               function = "sys_irq";
-                               groups = "sys_irq_grp";
-                       };
-               };
-
-               gpiomode: gpiomode@fffe0098 {
-                       compatible = "brcm,bcm6358-gpiomode", "syscon";
-                       reg = <0xfffe0098 0x4>;
-               };
-
-               leds: led-controller@fffe00d0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-leds";
-                       reg = <0xfffe00d0 0x8>;
-                       status = "disabled";
-               };
-
-               uart0: serial@fffe0100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfffe0100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@fffe0120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0xfffe0120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <3>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@fffe0800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-spi";
-                       reg = <0xfffe0800 0x70c>;
-                       interrupts = <1>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts b/target/linux/brcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts
deleted file mode 100644 (file)
index 5809b6d..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/dts-v1/;
-
-#include "bcm6358.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG520v";
-       compatible = "huawei,echolife-hg520v", "brcm,bcm6359", "brcm,bcm6358";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 37 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_green {
-                       label = "HW520:green:net";
-                       gpios = <&pinctrl 32 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts b/target/linux/brcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts
deleted file mode 100644 (file)
index 4498272..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-/dts-v1/;
-
-#include "bcm6362.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "SFR Neufbox 6 (Sercomm)";
-       compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6361", "brcm,bcm6362";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               service {
-                       label = "service";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <BTN_0>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 12 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 25 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       switch {
-               compatible = "realtek,rtl8367";
-               gpio-sda = <&pinctrl 18 0>;
-               gpio-sck = <&pinctrl 20 0>;
-
-               realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <20000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0xfe0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@ff0000 {
-                               reg = <0xff0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6362-sagem-fast-2504n.dts b/target/linux/brcm63xx/dts/bcm6362-sagem-fast-2504n.dts
deleted file mode 100644 (file)
index db8ce73..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
-/dts-v1/;
-
-#include "bcm6362.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Sagem F@st 2504N";
-       compatible = "sagem,fast-2504n", "brcm,bcm6362";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 24 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 25 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_orange {
-                       label = "fast2504n:orange:power";
-                       gpios = <&pinctrl 2 1>;
-               };
-               power_green {
-                       label = "fast2504n:green:power";
-                       gpios = <&pinctrl 10 1>;
-                       default-state = "on";
-               };
-               inet_red {
-                       label = "fast2504n:red:internet";
-                       gpios = <&pinctrl 26 1>;
-               };
-               ok_green {
-                       label = "fast2504n:green:ok";
-                       gpios = <&pinctrl 28 1>;
-               };
-               ok_orange {
-                       label = "fast2504n:orange:ok";
-                       gpios = <&pinctrl 29 1>;
-               };
-               wlan_orangee {
-                       label = "fast2504n:orange:wlan";
-                       gpios = <&pinctrl 30 1>;
-               };
-       };
-};
-
-&hsspi {
-       status = "ok";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <20000000>;
-               spi-tx-bus-width = <2>;
-               spi-rx-bus-width = <2>;
-               reg = <0>;
-
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       cfe@0 {
-                               reg = <0x000000 0x010000>;
-                               label = "cfe";
-                               read-only;
-                       };
-
-                       linux@10000 {
-                               reg = <0x010000 0x7e0000>;
-                               label = "linux";
-                               compatible = "brcm,bcm963xx-imagetag";
-                       };
-
-                       nvram@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "nvram";
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6362.dtsi b/target/linux/brcm63xx/dts/bcm6362.dtsi
deleted file mode 100644 (file)
index 2ff5c52..0000000
+++ /dev/null
@@ -1,294 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6362";
-
-       aliases {
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi0 = &lsspi;
-               spi1 = &hsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <40>, <41>, <42>, <43>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x10>,
-                             <0x10000030 0x10>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>, <3>;
-               };
-
-               pinctrl: pin-controller@10000080 {
-                       compatible = "brcm,bcm6362-pinctrl";
-                       reg = <0x10000080 0x8>,
-                             <0x10000088 0x8>,
-                             <0x10000090 0x4>,
-                             <0x10000098 0x4>,
-                             <0x1000009c 0x4>,
-                             <0x100000b8 0x4>;
-                       reg-names = "dirout", "dat", "led",
-                                   "mode", "ctrl", "basemode";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&ext_intc>;
-                       interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
-                       interrupt-names = "gpio24", "gpio25",
-                                         "gpio26", "gpio27";
-
-                       pinctrl_usb_device_led: usb_device_led {
-                               function = "usb_device_led";
-                               pins = "gpio0";
-                       };
-
-                       pinctrl_sys_irq: sys_irq {
-                               function = "sys_irq";
-                               pins = "gpio1";
-                       };
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio2";
-                               };
-
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio3";
-                               };
-                       };
-
-                       pinctrl_robosw_led_data: robosw_led_data {
-                               function = "robosw_led_data";
-                               pins = "gpio4";
-                       };
-
-                       pinctrl_robosw_led_clk: robosw_led_clk {
-                               function = "robosw_led_clk";
-                               pins = "gpio5";
-                       };
-
-                       pinctrl_robosw_led0: robosw_led0 {
-                               function = "robosw_led0";
-                               pins = "gpio6";
-                       };
-
-                       pinctrl_robosw_led1: robosw_led1 {
-                               function = "robosw_led1";
-                               pins = "gpio7";
-                       };
-
-                       pinctrl_inet_led: inet_led {
-                               function = "inet_led";
-                               pins = "gpio8";
-                       };
-
-                       pinctrl_spi_cs2: spi_cs2 {
-                               function = "spi_cs2";
-                               pins = "gpio9";
-                       };
-
-                       pinctrl_spi_cs3: spi_cs3 {
-                               function = "spi_cs3";
-                               pins = "gpio10";
-                       };
-
-                       pinctrl_ntr_pulse: ntr_pulse {
-                               function = "ntr_pulse";
-                               pins = "gpio11";
-                       };
-
-                       pinctrl_uart1_scts: uart1_scts {
-                               function = "uart1_scts";
-                               pins = "gpio12";
-                       };
-
-                       pinctrl_uart1_srts: uart1_srts {
-                               function = "uart1_srts";
-                               pins = "gpio13";
-                       };
-
-
-                       pinctrl_uart1: uart1 {
-                               pinctrl_uart1_sdin: uart1_sdin {
-                                       function = "uart1_sdin";
-                                       pins = "gpio14";
-                               };
-
-                               pinctrl_uart1_sdout: uart1_sdout {
-                                       function = "uart1_sdout";
-                                       pins = "gpio15";
-                               };
-                       };
-
-                       pinctrl_adsl_spi: adsl_spi {
-                               pinctrl_adsl_spi_miso: adsl_spi_miso {
-                                       function = "adsl_spi_miso";
-                                       pins = "gpio16";
-                               };
-
-                               pinctrl_adsl_spi_mosi: adsl_spi_mosi {
-                                       function = "adsl_spi_mosi";
-                                       pins = "gpio17";
-                               };
-
-                               pinctrl_adsl_spi_clk: adsl_spi_clk {
-                                       function = "adsl_spi_clk";
-                                       pins = "gpio18";
-                               };
-
-                               pinctrl_adsl_spi_cs: adsl_spi_cs {
-                                       function = "adsl_spi_cs";
-                                       pins = "gpio19";
-                               };
-                       };
-
-                       pinctrl_ephy0_led: ephy0_led {
-                               function = "ephy0_led";
-                               pins = "gpio20";
-                       };
-
-                       pinctrl_ephy1_led: ephy1_led {
-                               function = "ephy1_led";
-                               pins = "gpio21";
-                       };
-
-                       pinctrl_ephy2_led: ephy2_led {
-                               function = "ephy2_led";
-                               pins = "gpio22";
-                       };
-
-                       pinctrl_ephy3_led: ephy3_led {
-                               function = "ephy3_led";
-                               pins = "gpio23";
-                       };
-
-                       pinctrl_ext_irq0: ext_irq0 {
-                               function = "ext_irq0";
-                               pins = "gpio24";
-                       };
-
-                       pinctrl_ext_irq1: ext_irq1 {
-                               function = "ext_irq1";
-                               pins = "gpio25";
-                       };
-
-                       pinctrl_ext_irq2: ext_irq2 {
-                               function = "ext_irq2";
-                               pins = "gpio26";
-                       };
-
-                       pinctrl_ext_irq3: ext_irq3 {
-                               function = "ext_irq3";
-                               pins = "gpio27";
-                       };
-
-                       pinctrl_nand: nand {
-                               function = "nand";
-                               group = "nand_grp";
-                       };
-               };
-
-               uart0: serial@10000100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <3>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@10000120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <4>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@10000800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-spi";
-                       reg = <0x10000800 0x70c>;
-                       interrupts = <2>;
-                       /* clocks = <&clkctl 15>; */
-               };
-
-               hsspi: spi@10001000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-hsspi";
-                       reg = <0x10001000 0x600>;
-                       interrupts = <5>;
-                       /* clocks = <&clkctl 16>; */
-               };
-
-               leds: led-controller@10001900 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-leds";
-                       reg = <0x10001900 0x24>;
-                       status = "disabled";
-               };
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-actiontec-r1000h.dts b/target/linux/brcm63xx/dts/bcm6368-actiontec-r1000h.dts
deleted file mode 100644 (file)
index 05198a1..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Actiontec R1000H";
-       compatible = "actiontec,r1000h", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_green {
-                       label = "R1000H:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-
-               usb_green {
-                       label = "R1000H:green:usb";
-                       gpios = <&pinctrl 21 1>;
-               };
-
-               power_green {
-                       label = "R1000H:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-
-               wps_green {
-                       label = "R1000H:green:wps";
-                       gpios = <&pinctrl 23 1>;
-               };
-
-               power_red {
-                       label = "R1000H:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-
-               wps_red {
-                       label = "R1000H:red:wps";
-                       gpios = <&pinctrl 30 1>;
-               };
-
-               inet_red {
-                       label = "R1000H:red:inet";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               CFE@0 {
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       reg = <0x020000 0x1fc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@1fe0000 {
-                       reg = <0x1fe0000 0x20000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
-
-&uart1 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-adb-av4202n.dts b/target/linux/brcm63xx/dts/bcm6368-adb-av4202n.dts
deleted file mode 100644 (file)
index df9dc71..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "ADB P.DG AV4202N";
-       compatible = "adb,av4202n", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_white {
-                       label = "AV4202N:white:power";
-                       gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "AV4202N:red:power";
-                       gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
-               };
-               wan_white {
-                       label = "AV4202N:white:wan";
-                       gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
-               };
-               wan_red {
-                       label = "AV4202N:red:wan";
-                       gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
-               };
-               phone_white {
-                       label = "AV4202N:white:phone";
-                       gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
-               };
-               phone_red {
-                       label = "AV4202N:red:phone";
-                       gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
-               };
-               wifi {
-                       label = "AV4202N:blue:wifi";
-                       gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xfc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts b/target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvngr.dts
deleted file mode 100644 (file)
index 3df1514..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96368MVNgr reference board";
-       compatible = "brcm,bcm96368mvngr", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "96368MVNgr:green:adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_fail_green {
-                       label = "96368MVNgr:green:inet-fail";
-                       gpios = <&pinctrl 3 0>;
-               };
-               inet_green {
-                       label = "96368MVNgr:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "96368MVNgr:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               wps_green {
-                       label = "96368MVNgr:green:wps";
-                       gpios = <&pinctrl 23 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts b/target/linux/brcm63xx/dts/bcm6368-brcm-bcm96368mvwg.dts
deleted file mode 100644 (file)
index 1004f88..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Broadcom BCM96368MVWG reference board";
-       compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "96368MVWG:green:adsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               ppp_green {
-                       label = "96368MVWG:green:ppp";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "96368MVWG:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               wps_green {
-                       label = "96368MVWG:green:wps";
-                       gpios = <&pinctrl 23 1>;
-               };
-               ppp_fail_red {
-                       label = "96368MVWG:red:ppp-fail";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "brcm,bcm963xx-cfe-nor-partitions";
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025u.dts b/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025u.dts
deleted file mode 100644 (file)
index 248ec1d..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend VR-3025u";
-       compatible = "comtrend,vr-3025u", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "VR-3025u:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "VR-3025u:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "VR-3025u:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "VR-3025u:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-               inet_red {
-                       label = "VR-3025u:red:inet";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x0000000 0x0020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x0020000 0x1fc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@1fe0000 {
-                       label = "nvram";
-                       reg = <0x1fe0000 0x020000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
-                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025un.dts b/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3025un.dts
deleted file mode 100644 (file)
index ac1f896..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend VR-3025un";
-       compatible = "comtrend,vr-3025un", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "VR-3025un:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "VR-3025un:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "VR-3025un:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "VR-3025un:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-               inet_red {
-                       label = "VR-3025un:red:inet";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
-                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3026e.dts b/target/linux/brcm63xx/dts/bcm6368-comtrend-vr-3026e.dts
deleted file mode 100644 (file)
index 8048d13..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend VR-3026e";
-       compatible = "comtrend,vr-3026e", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "VR-3026e:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "VR-3026e:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "VR-3026e:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "VR-3026e:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-               inet_red {
-                       label = "VR-3026e:red:inet";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
-                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg622.dts b/target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg622.dts
deleted file mode 100644 (file)
index 77ecc62..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG622";
-       compatible = "huawei,echolife-hg622", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "HG622:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "HG622:green:inet";
-                       gpios = <&pinctrl 5 1>;
-               };
-               usb_green {
-                       label = "HG622:green:usb";
-                       gpios = <&pinctrl 11 1>;
-               };
-               power_green {
-                       label = "HG622:green:power";
-                       gpios = <&pinctrl 22 1>;
-                       default-state = "on";
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0xf80000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               cal_data@fa0000 {
-                       label = "cal_data";
-                       reg = <0xfa0000 0x020000>;
-                       read-only;
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x020000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci_gnt0 &pinctrl_pci_req0
-                    &pinctrl_pci_intb &pinctrl_pci_gnt1
-                    &pinctrl_pci_req1>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts b/target/linux/brcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts
deleted file mode 100644 (file)
index 3f855bf..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Huawei EchoLife HG655b";
-       compatible = "huawei,echolife-hg655b", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 12 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 23 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "HW65x:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               internet_green {
-                       label = "HW65x:green:internet";
-                       gpios = <&pinctrl 5 1>;
-               };
-
-               usb_green {
-                       label = "HW65x:green:usb";
-                       gpios = <&pinctrl 14 1>;
-               };
-               power_green {
-                       label = "HW65x:green:power";
-                       gpios = <&pinctrl 22 1>;
-                       default-state = "on";
-               };
-               voip_green {
-                       label = "HW65x:green:voip";
-                       gpios = <&pinctrl 25 1>;
-               };
-               wps_green {
-                       label = "HW65x:green:wps";
-                       gpios = <&pinctrl 27 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0x770000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               board_data@790000 {
-                       label = "board_data";
-                       reg = <0x790000 0x030000>;
-               };
-
-               cal_data@7c0000 {
-                       label = "cal_data";
-                       reg = <0x7c0000 0x020000>;
-                       read-only;
-               };
-
-               nvram@7d0000 {
-                       label = "nvram";
-                       reg = <0x7e0000 0x020000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
-                    &pinctrl_ephy2_led &pinctrl_ephy3_led>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts b/target/linux/brcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts
deleted file mode 100644 (file)
index 0354d8e..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear DGND3700v1/DGND3800B";
-       compatible = "netgear,dgnd3700-v1", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 10 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 12 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_green {
-                       label = "DGND3700v1_3800B:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_red {
-                       label = "DGND3700v1_3800B:red:inet";
-                       gpios = <&pinctrl 4 1>;
-               };
-               inet_green {
-                       label = "DGND3700v1_3800B:green:inet";
-                       gpios = <&pinctrl 5 1>;
-               };
-               wps_green {
-                       label = "DGND3700v1_3800B:green:wps";
-                       gpios = <&pinctrl 11 1>;
-               };
-               usbfront_green {
-                       label = "DGND3700v1_3800B:green:usb-front";
-                       gpios = <&pinctrl 13 1>;
-               };
-               usbback_green {
-                       label = "DGND3700v1_3800B:green:usb-back";
-                       gpios = <&pinctrl 14 1>;
-               };
-               power_red {
-                       label = "DGND3700v1_3800B:red:power";
-                       gpios = <&pinctrl 22 1>;
-               };
-               lan_green {
-                       label = "DGND3700v1_3800B:green:lan";
-                       gpios = <&pinctrl 23 1>;
-               };
-               power_green {
-                       label = "DGND3700v1_3800B:green:power";
-                       gpios = <&pinctrl 24 1>;
-                       default-state = "on";
-               };
-               wifi2g_green {
-                       label = "DGND3700v1_3800B:green:wifi2g";
-                       gpios = <&pinctrl 26 1>;
-               };
-               wifi5g_blue {
-                       label = "DGND3700v1_3800B:blue:wifi5g";
-                       gpios = <&pinctrl 27 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x020000 0x1e20000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               board_data@1e40000 {
-                       label = "board_data";
-                       reg = <0x1e40000 0x1a0000>;
-                       read-only;
-               };
-
-               nvram@1fe0000 {
-                       label = "nvram";
-                       reg = <0x1fe0000 0x20000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&lsspi {
-       switch@1 {
-               compatible = "brcm,bcm53115";
-               reg = <1>;
-               spi-max-frequency = <781000>;
-
-               lede,alias = "eth0";
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       wan@0 {
-                               reg = <0>;
-                               label = "wan";
-                       };
-
-                       lan@1 {
-                               reg = <1>;
-                               label = "lan1";
-                       };
-
-                       lan@2 {
-                               reg = <2>;
-                               label = "lan2";
-                       };
-
-                       lan@3 {
-                               reg = <3>;
-                               label = "lan3";
-                       };
-
-                       lan@4 {
-                               reg = <4>;
-                               label = "lan4";
-                       };
-
-                       cpu@8 {
-                               reg = <8>;
-                               label = "cpu";
-
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                               };
-                       };
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-observa-vh4032n.dts b/target/linux/brcm63xx/dts/bcm6368-observa-vh4032n.dts
deleted file mode 100644 (file)
index 48f35b1..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Observa VH4032N";
-       compatible = "observa,vh4032n", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               dsl_blue {
-                       label = "VH4032N:blue:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               dsl_red {
-                       label = "VH4032N:red:dsl";
-                       gpios = <&pinctrl 5 1>;
-               };
-               hspa_blue {
-                       label = "VH4032N:blue:hspa";
-                       gpios = <&pinctrl 11 1>;
-               };
-               hspa_red {
-                       label = "VH4032N:red:hspa";
-                       gpios = <&pinctrl 12 1>;
-               };
-               power_blue {
-                       label = "VH4032N:blue:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "VH4032N:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-               voice_blue {
-                       label = "VH4032N:blue:voice";
-                       gpios = <&pinctrl 25 1>;
-               };
-               voice_red {
-                       label = "VH4032N:red:voice";
-                       gpios = <&pinctrl 26 1>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
-                   &pinctrl_ephy2_led &pinctrl_ephy3_led>;
-
-       usb_hub_reset {
-               gpio-hog;
-               gpios = <27 0>;
-               output-high;
-               line-name = "usb-hub-reset-gpio";
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x0000000 0x0020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x0020000 0x1fc0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@1fe0000 {
-                       label = "nvram";
-                       reg = <0x1fe0000 0x020000>;
-               };
-       };
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts b/target/linux/brcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts
deleted file mode 100644 (file)
index c123832..0000000
+++ /dev/null
@@ -1,98 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Zyxel P870HW-51a v2";
-       compatible = "zyxel,p870hw-51a-v2", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 36 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power_green {
-                       label = "P870HW-51a:green:power";
-                       gpios = <&pinctrl 0 0>;
-                       default-state = "on";
-               };
-               dsl_green {
-                       label = "P870HW-51a:green:dsl";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_green {
-                       label = "P870HW-51a:green:inet";
-                       gpios = <&pinctrl 22 1>;
-               };
-               wps_orange {
-                       label = "P870HW-51a:orange:wps";
-                       gpios = <&pinctrl 24 1>;
-               };
-               inet_red {
-                       label = "P870HW-51a:red:inet";
-                       gpios = <&pinctrl 33 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x3e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@3f0000 {
-                       label = "nvram";
-                       reg = <0x3f0000 0x010000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6368.dtsi b/target/linux/brcm63xx/dts/bcm6368.dtsi
deleted file mode 100644 (file)
index b834f9e..0000000
+++ /dev/null
@@ -1,319 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6368";
-
-       aliases {
-               pflash = &pflash;
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi0 = &lsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-
-               cpu@1 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <1>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc0: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <20>, <21>, <22>, <23>;
-               };
-
-               ext_intc1: interrupt-controller@1000001c {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x1000001c 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <24>, <25>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x10>,
-                             <0x10000030 0x10>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>, <3>;
-               };
-
-               pinctrl: pin-controller@10000080 {
-                       compatible = "brcm,bcm6368-pinctrl";
-                       reg = <0x10000080 0x8>,
-                             <0x10000088 0x8>,
-                             <0x10000098 0x4>;
-                       reg-names = "dirout", "dat", "mode";
-                       brcm,gpiobasemode = <&gpiobasemode>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupts-extended = <&ext_intc1 0 0>,
-                                             <&ext_intc1 1 0>,
-                                             <&ext_intc0 0 0>,
-                                             <&ext_intc0 1 0>,
-                                             <&ext_intc0 2 0>,
-                                             <&ext_intc0 3 0>;
-                       interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
-                                         "gpio36", "gpio37";
-
-                       pinctrl_analog_afe_0: analog_afe_0 {
-                               function = "analog_afe_0";
-                               pins = "gpio0";
-                       };
-
-                       pinctrl_analog_afe_1: analog_afe_1 {
-                               function = "analog_afe_1";
-                               pins = "gpio1";
-                       };
-
-                       pinctrl_sys_irq: sys_irq {
-                               function = "sys_irq";
-                               pins = "gpio2";
-                       };
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio3";
-                               };
-
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio4";
-                               };
-                       };
-
-                       pinctrl_inet_led: inet_led {
-                               function = "inet_led";
-                               pins = "gpio5";
-                       };
-
-                       pinctrl_ephy0_led: ephy0_led {
-                               function = "ephy0_led";
-                               pins = "gpio6";
-                       };
-
-                       pinctrl_ephy1_led: ephy1_led {
-                               function = "ephy1_led";
-                               pins = "gpio7";
-                       };
-
-                       pinctrl_ephy2_led: ephy2_led {
-                               function = "ephy2_led";
-                               pins = "gpio8";
-                       };
-
-                       pinctrl_ephy3_led: ephy3_led {
-                               function = "ephy3_led";
-                               pins = "gpio9";
-                       };
-
-                       pinctrl_robosw_led_data: robosw_led_data {
-                               function = "robosw_led_data";
-                               pins = "gpio10";
-                       };
-
-                       pinctrl_robosw_led_clk: robosw_led_clk {
-                               function = "robosw_led_clk";
-                               pins = "gpio11";
-                       };
-
-                       pinctrl_robosw_led0: robosw_led0 {
-                               function = "robosw_led0";
-                               pins = "gpio12";
-                       };
-
-                       pinctrl_robosw_led1: robosw_led1 {
-                               function = "robosw_led1";
-                               pins = "gpio13";
-                       };
-
-                       pinctrl_usb_device_led: usb_device_led {
-                               function = "usb_device_led";
-                               pins = "gpio14";
-                       };
-
-                       pinctrl_pci: pci {
-                               pinctrl_pci_req1: pci_req1 {
-                                       function = "pci_req1";
-                                       pins = "gpio16";
-                               };
-
-                               pinctrl_pci_gnt1: pci_gnt1 {
-                                       function = "pci_gnt1";
-                                       pins = "gpio17";
-                               };
-
-                               pinctrl_pci_intb: pci_intb {
-                                       function = "pci_intb";
-                                       pins = "gpio18";
-                               };
-
-                               pinctrl_pci_req0: pci_req0 {
-                                       function = "pci_req0";
-                                       pins = "gpio19";
-                               };
-
-                               pinctrl_pci_gnt0: pci_gnt0 {
-                                       function = "pci_gnt0";
-                                       pins = "gpio20";
-                               };
-                       };
-
-                       pinctrl_pcmcia: pcmcia {
-                               pinctrl_pcmcia_cd1: pcmcia_cd1 {
-                                       function = "pcmcia_cd1";
-                                       pins = "gpio22";
-                               };
-
-                               pinctrl_pcmcia_cd2: pcmcia_cd2 {
-                                       function = "pcmcia_cd2";
-                                       pins = "gpio23";
-                               };
-
-                               pinctrl_pcmcia_vs1: pcmcia_vs1 {
-                                       function = "pcmcia_vs1";
-                                       pins = "gpio24";
-                               };
-
-                               pinctrl_pcmcia_vs2: pcmcia_vs2 {
-                                       function = "pcmcia_vs2";
-                                       pins = "gpio25";
-                               };
-                       };
-
-                       pinctrl_ebi_cs2: ebi_cs2 {
-                               function = "ebi_cs2";
-                               pins = "gpio26";
-                       };
-
-                       pinctrl_ebi_cs3: ebi_cs3 {
-                               function = "ebi_cs2";
-                               pins = "gpio27";
-                       };
-
-                       pinctrl_spi_cs2: spi_cs2 {
-                               function = "spi_cs2";
-                               pins = "gpio28";
-                       };
-
-                       pinctrl_spi_cs3: spi_cs3 {
-                               function = "spi_cs3";
-                               pins = "gpio29";
-                       };
-
-                       pinctrl_spi_cs4: spi_cs4 {
-                               function = "spi_cs4";
-                               pins = "gpio30";
-                       };
-
-                       pinctrl_spi_cs5: spi_cs5 {
-                               function = "spi_cs5";
-                               pins = "gpio31";
-                       };
-
-                       pinctrl_uart1: uart1 {
-                               function = "uart1";
-                               group = "uart1_grp";
-                       };
-               };
-
-               gpiobasemode: gpiobasemode@100000b8 {
-                       compatible = "brcm,bcm6368-gpiobasemode", "syscon";
-                       reg = <0x100000b8 0x4>;
-               };
-
-               leds: led-controller@100000d0 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-leds";
-                       reg = <0x100000d0 0x8>;
-                       status = "disabled";
-               };
-
-               uart0: serial@10000100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <2>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@10000120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <3>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               lsspi: spi@10000800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6358-spi";
-                       reg = <0x10000800 0x70c>;
-                       interrupts = <1>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-
-       pflash: nor@18000000 {
-               compatible = "cfi-flash";
-               reg = <0x18000000 0x2000000>;
-               bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               status = "disabled";
-       };
-};
diff --git a/target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts b/target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts
deleted file mode 100644 (file)
index c6db272..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Comtrend WAP-5813n";
-       compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               wlan {
-                       label = "wlan";
-                       gpios = <&pinctrl 32 1>;
-                       linux,code = <KEY_WLAN>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 34 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 35 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               inet_green {
-                       label = "WAP-5813n:green:inet";
-                       gpios = <&pinctrl 5 0>;
-               };
-               power_green {
-                       label = "WAP-5813n:green:power";
-                       gpios = <&pinctrl 22 0>;
-                       default-state = "on";
-               };
-               wps_green {
-                       label = "WAP-5813n:green:wps";
-                       gpios = <&pinctrl 23 1>;
-               };
-               power_red {
-                       label = "WAP-5813n:red:power";
-                       gpios = <&pinctrl 24 0>;
-               };
-               inet_red {
-                       label = "WAP-5813n:red:inet";
-                       gpios = <&pinctrl 31 0>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x000000 0x010000>;
-                       read-only;
-               };
-
-               linux@10000 {
-                       label = "linux";
-                       reg = <0x010000 0x7e0000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               nvram@7f0000 {
-                       label = "nvram";
-                       reg = <0x7f0000 0x010000>;
-               };
-       };
-};
-
-&lsspi {
-       switch@0 {
-               compatible = "brcm,bcm53115";
-               reg = <0>;
-               spi-max-frequency = <781000>;
-
-               lede,alias = "eth0";
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       lan@0 {
-                               reg = <0>;
-                               label = "lan4";
-                       };
-
-                       lan@1 {
-                               reg = <1>;
-                               label = "lan3";
-                       };
-
-                       lan@2 {
-                               reg = <2>;
-                               label = "lan2";
-                       };
-
-                       lan@3 {
-                               reg = <3>;
-                               label = "lan1";
-                       };
-
-                       wan@4 {
-                               reg = <4>;
-                               label = "wan";
-                       };
-
-                       cpu@5 {
-                               reg = <5>;
-                               label = "cpu";
-
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                                       asym-pause;
-                                       pause;
-                               };
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/dts/bcm6369-netgear-evg2000.dts b/target/linux/brcm63xx/dts/bcm6369-netgear-evg2000.dts
deleted file mode 100644 (file)
index 93d4792..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
-/dts-v1/;
-
-#include "bcm6368.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear EVG2000";
-       compatible = "netgear,evg2000", "brcm,bcm6369", "brcm,bcm6368";
-
-       chosen {
-               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pinctrl 25 1>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&pinctrl 26 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               voip1_green {
-                       label = "EVG2000:green:voip1";
-                       gpios = <&pinctrl 14 1>;
-               };
-               voip2_green {
-                       label = "EVG2000:green:voip2";
-                       gpios = <&pinctrl 2 1>;
-               };
-               inet_red {
-                       label = "EVG2000:red:inet";
-                       gpios = <&pinctrl 4 1>;
-               };
-               inet_green {
-                       label = "EVG2000:green:inet";
-                       gpios = <&pinctrl 5 1>;
-               };
-               usb_green {
-                       label = "EVG2000:green:usb";
-                       gpios = <&pinctrl 15 1>;
-               };
-               power_green {
-                       label = "EVG2000:green:power";
-                       gpios = <&pinctrl 22 1>;
-                       default-state = "on";
-               };
-               power_red {
-                       label = "EVG2000:red:power";
-                       gpios = <&pinctrl 23 1>;
-               };
-               lan_green {
-                       label = "EVG2000:green:lan";
-                       gpios = <&pinctrl 24 1>;
-               };
-               wireless_green {
-                       label = "EVG2000:green:wireless";
-                       gpios = <&pinctrl 26 1>;
-               };
-               wan_green {
-                       label = "EVG2000:green:wan";
-                       gpios = <&pinctrl 27 1>;
-               };
-       };
-};
-
-&pflash {
-       status = "ok";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               cfe@0 {
-                       label = "CFE";
-                       reg = <0x00000000 0x00020000>;
-                       read-only;
-               };
-
-               linux@20000 {
-                       label = "linux";
-                       reg = <0x00020000 0x00f40000>;
-                       compatible = "brcm,bcm963xx-imagetag";
-               };
-
-               board_data@f60000 {
-                       label = "board_data";
-                       reg = <0x00f60000 0x00080000>;
-                       read-only;
-               };
-
-               nvram@fe0000 {
-                       label = "nvram";
-                       reg = <0x00fe0000 0x00020000>;
-               };
-       };
-};
-
-&pinctrl {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pci>;
-};
-
-&uart0 {
-       status = "ok";
-};
diff --git a/target/linux/brcm63xx/generic/target.mk b/target/linux/brcm63xx/generic/target.mk
deleted file mode 100644 (file)
index d43a37c..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-BOARDNAME:=generic
-
-define Target/Description
-       Build firmware images for BCM63XX boards without SMP support.
-endef
-
-
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
deleted file mode 100644 (file)
index cc1660a..0000000
+++ /dev/null
@@ -1,179 +0,0 @@
-#
-# Copyright (C) 2006-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-LOADADDR = 0x80010000          # RAM start + 64K
-KERNEL_ENTRY = $(LOADADDR)     # Newer kernels add a jmp to the kernel_entry at the start of the binary
-LOADER_ENTRY = 0x80a00000      # RAM start + 10M, for relocate
-RAMSIZE = 0x02000000           # 32MB
-LZMA_TEXT_START = 0x81800000   # 32MB - 8MB
-
-LOADER_MAKEOPTS= \
-               KDIR=$(KDIR) \
-               LOADADDR=$(LOADADDR) \
-               KERNEL_ENTRY=$(KERNEL_ENTRY) \
-               RAMSIZE=$(RAMSIZE) \
-               LZMA_TEXT_START=$(LZMA_TEXT_START) \
-
-RELOCATE_MAKEOPTS= \
-               CACHELINE_SIZE=16 \
-               KERNEL_ADDR=$(KERNEL_ENTRY) \
-               CROSS_COMPILE=$(TARGET_CROSS) \
-               LZMA_TEXT_START=$(LOADER_ENTRY)
-
-define Build/Compile
-       rm -rf $(KDIR)/relocate
-       $(CP) ../../generic/image/relocate $(KDIR)
-       $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
-endef
-
-### Kernel scripts ###
-define Build/hcs-initramfs
-       $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
-               --rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
-               --output_file=$@.hcs --ldaddress=$(LOADADDR)
-       mv $@.hcs $@
-endef
-
-define Build/loader-lzma
-       rm -rf $@.src
-       $(MAKE) -C lzma-loader \
-               $(LOADER_MAKEOPTS) \
-               PKG_BUILD_DIR="$@.src" \
-               TARGET_DIR="$(dir $@)" \
-               LOADER_DATA="$@" \
-               LOADER_NAME="$(notdir $@)" \
-               compile loader.$(1)
-       mv "$@.$(1)" "$@"
-       rm -rf $@.src
-endef
-
-define Build/lzma
-       # CFE is a LZMA nazi! It took me hours to find out the parameters!
-       # Also I think lzma has a bug cause it generates different output depending on
-       # if you use stdin / stdout or not. Use files instead of stdio here, cause
-       # otherwise CFE will complain and not boot the image.
-       $(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma
-       mv $@.lzma $@
-endef
-
-define Build/lzma-cfe
-       # Strip out the length, CFE doesn't like this
-       dd if=$@ of=$@.lzma.cfe bs=5 count=1
-       dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
-       mv $@.lzma.cfe $@
-endef
-
-define Build/relocate-kernel
-       # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
-       # kernel might get larger than that, so let CFE unpack and load at a
-       # higher address and make the kernel relocate itself to the expected
-       # location.
-       ( \
-               dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
-               perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
-               cat $@ \
-       ) > $@.relocate
-       mv $@.relocate $@
-endef
-
-### Image scripts ###
-define rootfspad/jffs2-128k
---align-rootfs
-endef
-define rootfspad/jffs2-64k
---align-rootfs
-endef
-define rootfspad/squashfs
-endef
-
-define Image/LimitName16
-$(shell expr substr "$(1)" 1 16)
-endef
-
-define Image/FileSystemStrip
-$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
-endef
-
-define Build/cfe-bin
-       $(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
-               --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
-               --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
-               --info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
-               --info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \
-               $(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
-               $(CFE_EXTRAS) $(1)
-endef
-
-define Build/cfe-old-bin
-       $(TOPDIR)/scripts/brcmImage.pl -t -p \
-               -o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
-               -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
-               -k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) \
-               $(CFE_EXTRAS)
-endef
-
-define Build/cfe-spw303v-bin
-       $(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
-               --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
-               --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
-               $(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
-               $(CFE_EXTRAS) $(1)
-endef
-
-define Build/spw303v-bin
-       $(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
-       mv $@.spw303v $@
-endef
-
-define Build/zyxel-bin
-       $(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
-       mv $@.zyxel $@
-endef
-
-define Build/redboot-bin
-       # Prepare kernel and rootfs
-       dd if=$(IMAGE_KERNEL) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
-       dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) bs=64k conv=sync
-       echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))
-       # Generate the scripted image
-       $(TOPDIR)/scripts/redboot-script.pl \
-               -k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
-               -r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) \
-               -a $(strip $(LOADER_ENTRY)) -f 0xbe430000 -l 0x7c0000 \
-               -s 0x1000 -t 20 -o $@.redbootscript
-       dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
-       cat \
-               "$@.redbootscript.padded" \
-               "$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
-               "$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))" \
-               > "$@"
-endef
-
-define Device/Default
-  PROFILES = Default $$(DEVICE_NAME)
-  KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
-  KERNEL_INITRAMFS_SUFFIX := .elf
-  DEVICE_DTS_DIR := ../dts
-  SOC = bcm$$(CFE_CHIP_ID)
-  DEVICE_DTS = $$(SOC)-$(subst _,-,$(1))
-endef
-
-ATH5K_PACKAGES := kmod-ath5k wpad-basic
-ATH9K_PACKAGES := kmod-ath9k wpad-basic
-B43_PACKAGES := kmod-b43 wpad-basic
-BRCMWL_PACKAGES := kmod-brcm-wl nas wlc
-RT28_PACKAGES := kmod-rt2800-pci wpad-basic
-RT61_PACKAGES := kmod-rt61-pci wpad-basic
-USB1_PACKAGES := kmod-usb-ohci kmod-usb-ledtrig-usbport
-USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
-
-include bcm63xx.mk
-
-$(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx/image/README.images-bcm63xx b/target/linux/brcm63xx/image/README.images-bcm63xx
deleted file mode 100644 (file)
index 91b6d01..0000000
+++ /dev/null
@@ -1,127 +0,0 @@
-The image neede to flash onto a Broadcom 63xx-series board depends on the
-board, method you are using to flash, and, for web-based flash, on the version
-of the Broadcom code your router uses.
-
-There are two major revisions of the Broadcom code as far as imagetags are
-concerned, before 3.08 and after 3.08, however there are some variations 
-within in that, either due to vendor differences or due to changes at 
-Broadcom (it's not clear yet which is the case).  In addtion Pirelli modified
-the Broadcom code, so Alice Gate models use a different imagetag than any 
-other vendor.
-
-The imagetag format for flashing via CFE is the same for almost all the 
-boards, and is the same for all images generated by the imagetag utility.
-Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
-
-The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
-and is known to be correct as the source code GPL and is available for reading.
-
-Broadcom code 2.21 is based on the BT Voyager firmware image I looked at.  It
-may in fact be BT Voyager-specific.  2.21 is actually more difficult to deal
-with the imagetag from 3.00 as it has three different CRC calculations in
-addtition to the header CRC.
-
-Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and 
-Tecom GW6000, and is the version of the flashing that was present before the
-imagetags were split by broadcom code version (early June 2009)
-
-3.04 is guessed to be the same as 3.00-3.02 based on available information
-
-Broadom 3.06 is thought to be the same as 3.00-3.02, however the only 3.06 
-this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
-which is known to be different due to vendor (Pirelli) modifications to the
-Broadcom code.
-
-Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
-versions, and has been tested on the Tecom GW6200.  This version introdec changes to
-the imagetag to deal with TR69 (a remote rouer management system developed by the
-DSL forum).  There is a field for vendor-specific information, that at least in some
-cases is not optional.  It is based on the hexedit of a neufbox4 firmware image, the
-information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
-GW6200 image.
-
-Some boards share the same tag format, but require vendor-specific fields in
-the board.  In that case the tagid is shared, but the filename of the generated
-image reflects the router for which the image was created.
-
-router        |method       | codever |filename
-+-------------+-------------+---------+---------------------------------------
-|any          |cfe+most web |   any   |openwrt-<board>-<fs>-cfe.bin
-|AGVoIP2+WiFi |cfe          |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
-|AGVoIP2+WiFi |web          |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
-|CT536        |web          |3.02     |openwrt-CT536_CT5621-<fs>-cfe.bin
-|CT5621       |web          |3.02     |openwrt-CT536_CT5621-<fs>-cfe.bin
-|DG834GT      |web          |3.02     |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
-|DG834PN      |web          |3.02     |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
-|DSL-2640B    |web          |3.10     |openwrt-DSL2640B-<fs>-cfe.bin
-|DSL-2740B    |web          |3.10     |openwrt-DSL2670B-<fs>-cfe.bin
-|F5D7633      |web          |3.10     |openwrt-F5D7633-<fs>-cfe.bin
-|F@ST2404     |web          |3.0X?    |openwrt-F@ST2404-cfe-<fs>-cfe.bin
-|F@ST2404     |web          |3.1X?    |openwrt-F@ST2404-<fs>-cfe.bin
-|GW6000       |web          |3.00     |openwrt-GW6000-<fs>-cfe.bin
-|GW6200       |web          |3.10     |openwrt-GW6200-<fs>-cfe.bin
-|Neufbox4     |web          |3.12     |openwrt-NEUFBOX4-<fs>-cfe.bin
-|TD8810A      |web          |3.06     |openwrt-TD8810-<fs>-cfe.bin
-|TD8810B      |web          |3.06     |openwrt-TD8810-<fs>-cfe.bin
-|TD8811A      |web          |3.06     |openwrt-TD8811-<fs>-cfe.bin
-|TD8811B      |web          |3.06     |openwrt-TD881-<fs>-cfe.bin
-|TD8900GB     |web          |3.06     |openwrt-TD8900DB<fs>-cfe.bin
-|USR9108      |web          |3.0X?    |openwrt-USR9108-<fs>-cfe.bin
-|V2091_BTR    |web          |2.21     |openwrt-V2091_BTR-<fs>-cfe.bin
-|V2091_ROI    |web          |2.21     |openwrt-V2091-<fs>-cfe.bin
-|V2091_WB     |web          |2.21     |openwrt-V2091-<fs>-cfe.bin
-|V210_BTR     |web          |2.21     |openwrt-V210_BTR-<fs>-cfe.bin
-|V210_ROI     |web          |2.21     |openwrt-V210-ROI_WB<fs>-cfe.bin
-|V210_WB      |web          |2.21     |openwrt-V210-ROI_WB<fs>-cfe.bin
-|V2110        |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
-|V2110_AA     |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
-|V2110_ROI    |web          |2.21     |openwrt-V2110-<fs>-cfe.bin
-|V2500V       |web          |2.21     |openwrt-V2500V<fs>-cfe.bin
-|V2500V_AA    |web          |2.21     |openwrt-V2500V-<fs>-cfe.bin
-|V2500V_SIP_CLUB |web       |2.21     |openwrt-V2500V-<fs>-cfe.bin
-
-Old imagetag routers
---------------------
-Davolink DV201AMR
-
-Redboot routers
----------------
-Inventel Livebox
-
-Known router->code versions
----------------------------
-
-Vendor                     |Model                                     |Code Ver
----------------------------+------------------------------------------+--------
-Belkin                     |F5D7633                                   |3.10
-British Telecom (BT)       |Voyager V2091_BTR                         |2.21
-British Telecom (BT)       |Voyager V2091_ROI                         |2.21
-British Telecom (BT)       |Voyager V2091_WB                          |2.21
-British Telecom (BT)       |Voyager V210_BTR                          |2.21
-British Telecom (BT)       |Voyager V210_ROI                          |2.21
-British Telecom (BT)       |Voyager V210_WB                           |2.21
-British Telecom (BT)       |Voyager V2110                             |2.21
-British Telecom (BT)       |Voyager V2110_AA                          |2.21
-British Telecom (BT)       |Voyager V2110_ROI                         |2.21
-British Telecom (BT)       |Voyager V220V                             |2.21
-British Telecom (BT)       |Voyager V2500V                            |2.21
-British Telecom (BT)       |Voyager V2500V_AA                         |2.21
-British Telecom (BT)       |Voyager V2500V_SIP_CLUB                   |2.21
-Comtrend                   |CT-5261                                   |3.02
-Comtrend                   |CT-536                                    |3.02
-D-Link                     |DSL-2640B                                 |3.10
-D-Link                     |DSL-2670B                                 |3.10
-NetGear                           |DG834GT                                   |3.02
-NetGear                           |DG834PN                                   |3.02
-Neuf Cegetel               |Neufbox 4                                 |3.12
-Pirelli                    |Alice Gate Wi-Fi (+VoIP models?)          |ag 3.06
-Sagem                     |F@ST2404                                  |?
-TP-Link                    |TD-8810A                                  |3.06
-TP-Link                           |TD-8810B                                  |3.06
-TP-Link                           |TD-8811A                                  |3.06
-TP-Link                           |TD-8811B                                  |3.06
-TP-Link                           |TD-W8900GB                                |3.06
-Tecom                      |GW6000                                    |3.00
-Tecom                      |GW6200                                    |3.10
-USR                       |9108                                      |?
-
diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk
deleted file mode 100644 (file)
index 265fa09..0000000
+++ /dev/null
@@ -1,1151 +0,0 @@
-
-#
-# BCM33XX/BCM63XX Profiles
-#
-
-define Device/bcm33xx
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs
-  IMAGES :=
-  HCS_MAGIC_BYTES :=
-  HCS_REV_MIN :=
-  HCS_REV_MAJ :=
-endef
-DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
-
-define Device/bcm63xx
-  FILESYSTEMS := squashfs jffs2-64k jffs2-128k
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | lzma-cfe
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
-  IMAGES := cfe.bin
-  IMAGE/cfe.bin := cfe-bin --pad $$$$(shell expr $$$$(FLASH_MB) / 2)
-  IMAGE/cfe-4M.bin := cfe-bin --pad 2
-  IMAGE/cfe-8M.bin := cfe-bin --pad 4
-  IMAGE/cfe-16M.bin := cfe-bin --pad 8
-  IMAGE/cfe-bc221.bin := cfe-bin --layoutver 5
-  IMAGE/cfe-old.bin := cfe-old-bin
-  IMAGE/sysupgrade.bin := cfe-bin
-  BLOCK_SIZE := 0x10000
-  IMAGE_OFFSET :=
-  FLASH_MB := 4
-  CFE_BOARD_ID :=
-  CFE_CHIP_ID :=
-  CFE_EXTRAS = --block-size $$(BLOCK_SIZE) --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCK_SIZE))
-endef
-DEVICE_VARS += BLOCK_SIZE FLASH_MB IMAGE_OFFSET
-DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
-
-define Device/bcm63xx_netgear
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := NETGEAR
-  IMAGES := factory.chk sysupgrade.bin
-  IMAGE/factory.chk := cfe-bin | netgear-chk
-  NETGEAR_BOARD_ID :=
-  NETGEAR_REGION :=
-endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
-
-define Device/bcm63xx_redboot
-  FILESYSTEMS := squashfs
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | gzip
-  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
-  IMAGES := redboot.bin
-  IMAGE/redboot.bin := redboot-bin
-  REDBOOT_PREFIX := $$(IMAGE_PREFIX)
-endef
-DEVICE_VARS += REDBOOT_PREFIX
-
-### Generic ###
-define Device/brcm_bcm963281tan
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 963281TAN
-  IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
-  CFE_BOARD_ID := 963281TAN
-  CFE_CHIP_ID := 6328
-endef
-TARGET_DEVICES += brcm_bcm963281tan
-
-define Device/brcm_bcm96328avng
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96328avng
-  IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
-  CFE_BOARD_ID := 96328avng
-  CFE_CHIP_ID := 6328
-endef
-TARGET_DEVICES += brcm_bcm96328avng
-
-define Device/brcm_bcm96338gw
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96338GW
-  CFE_BOARD_ID := 6338GW
-  CFE_CHIP_ID := 6338
-endef
-TARGET_DEVICES += brcm_bcm96338gw
-
-define Device/brcm_bcm96338w
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96338W
-  CFE_BOARD_ID := 6338W
-  CFE_CHIP_ID := 6338
-endef
-TARGET_DEVICES += brcm_bcm96338w
-
-define Device/brcm_bcm96345gw2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96345GW2
-  IMAGES += cfe-bc221.bin
-  CFE_BOARD_ID := 96345GW2
-  CFE_CHIP_ID := 6345
-  DEFAULT := n
-endef
-TARGET_DEVICES += brcm_bcm96345gw2
-
-define Device/brcm_bcm96348gw
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96348GW
-  IMAGES += cfe-bc221.bin
-  CFE_BOARD_ID := 96348GW
-  CFE_CHIP_ID := 6348
-endef
-TARGET_DEVICES += brcm_bcm96348gw
-
-define Device/brcm_bcm96348gw-10
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96348GW-10
-  CFE_BOARD_ID := 96348GW-10
-  CFE_CHIP_ID := 6348
-endef
-TARGET_DEVICES += brcm_bcm96348gw-10
-
-define Device/brcm_bcm96348gw-11
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96348GW-11
-  CFE_BOARD_ID := 96348GW-11
-  CFE_CHIP_ID := 6348
-endef
-TARGET_DEVICES += brcm_bcm96348gw-11
-
-define Device/brcm_bcm96348r
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96348R
-  CFE_BOARD_ID := 96348R
-  CFE_CHIP_ID := 6348
-endef
-TARGET_DEVICES += brcm_bcm96348r
-
-define Device/brcm_bcm96358vw
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96358VW
-  CFE_BOARD_ID := 96358VW
-  CFE_CHIP_ID := 6358
-endef
-TARGET_DEVICES += brcm_bcm96358vw
-
-define Device/brcm_bcm96358vw2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96358VW2
-  CFE_BOARD_ID := 96358VW2
-  CFE_CHIP_ID := 6358
-endef
-TARGET_DEVICES += brcm_bcm96358vw2
-
-define Device/brcm_bcm96368mvngr
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96368MVNgr
-  CFE_BOARD_ID := 96368MVNgr
-  CFE_CHIP_ID := 6368
-endef
-TARGET_DEVICES += brcm_bcm96368mvngr
-
-define Device/brcm_bcm96368mvwg
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Generic
-  DEVICE_MODEL := 96368MVWG
-  CFE_BOARD_ID := 96368MVWG
-  CFE_CHIP_ID := 6368
-endef
-TARGET_DEVICES += brcm_bcm96368mvwg
-
-### Actiontec ###
-define Device/actiontec_r1000h
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Actiontec
-  DEVICE_MODEL := R1000H
-  FILESYSTEMS := squashfs
-  CFE_BOARD_ID := 96368MVWG
-  CFE_CHIP_ID := 6368
-  FLASH_MB := 32
-  IMAGE_OFFSET := 0x20000
-  DEVICE_PACKAGES := $(USB2_PACKAGES) $(BRCMWL_PACKAGES)
-endef
-TARGET_DEVICES += actiontec_r1000h
-
-### ADB ###
-define Device/adb_a4001n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := ADB
-  DEVICE_MODEL := P.DG A4001N
-  CFE_BOARD_ID := 96328dg2x2
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
-endef
-TARGET_DEVICES += adb_a4001n
-
-define Device/adb_a4001n1
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := ADB
-  DEVICE_MODEL := P.DG A4001N1
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 963281T_TEF
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
-endef
-TARGET_DEVICES += adb_a4001n1
-
-define Device/adb_av4202n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := ADB
-  DEVICE_MODEL := P.DG AV4202N
-  IMAGE_OFFSET := 0x20000
-  CFE_BOARD_ID := 96368_Swiss_S1
-  CFE_CHIP_ID := 6368
-  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
-endef
-TARGET_DEVICES += adb_av4202n
-
-### Alcatel ###
-define Device/alcatel_rg100a
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Alcatel
-  DEVICE_MODEL := RG100A
-  CFE_BOARD_ID := 96358VW2
-  CFE_CHIP_ID := 6358
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(USB2_PACKAGES) $(B43_PACKAGES)
-endef
-TARGET_DEVICES += alcatel_rg100a
-
-### Asmax ###
-define Device/asmax_ar-1004g
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Asmax
-  DEVICE_MODEL := AR 1004g
-  CFE_BOARD_ID := 96348GW-10
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += asmax_ar-1004g
-
-### Belkin ###
-define Device/belkin_f5d7633
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Belkin
-  DEVICE_MODEL := F5D7633
-  CFE_BOARD_ID := 96348GW-10
-  CFE_CHIP_ID := 6348
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += belkin_f5d7633
-
-### Broadcom ###
-define Device/brcm_bcm96318ref
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Broadcom
-  DEVICE_MODEL := BCM96318REF reference board
-  IMAGES :=
-  CFE_BOARD_ID := 96318REF
-  CFE_CHIP_ID := 6318
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES) kmod-bcm63xx-udc
-endef
-TARGET_DEVICES += brcm_bcm96318ref
-
-define Device/brcm_bcm96318ref-p300
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Broadcom
-  DEVICE_MODEL := BCM96318REF_P300 reference board
-  IMAGES :=
-  CFE_BOARD_ID := 96318REF_P300
-  CFE_CHIP_ID := 6318
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES) kmod-bcm63xx-udc
-endef
-TARGET_DEVICES += brcm_bcm96318ref-p300
-
-define Device/brcm_bcm963268bu-p300
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Broadcom
-  DEVICE_MODEL := BCM963268BU_P300 reference board
-  IMAGES :=
-  CFE_BOARD_ID := 963268BU_P300
-  CFE_CHIP_ID := 63268
-  DEVICE_PACKAGES := $(USB2_PACKAGES) kmod-bcm63xx-udc
-endef
-TARGET_DEVICES += brcm_bcm963268bu-p300
-
-define Device/brcm_bcm963269bhr
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Broadcom
-  DEVICE_MODEL := BCM963269BHR reference board
-  IMAGES :=
-  CFE_BOARD_ID := 963269BHR
-  CFE_CHIP_ID := 63268
-  SOC := bcm63269
-  DEVICE_PACKAGES := $(USB2_PACKAGES) kmod-bcm63xx-udc
-endef
-TARGET_DEVICES += brcm_bcm963269bhr
-
-### BT ###
-define Device/bt_home-hub-2-a
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := BT
-  DEVICE_MODEL := Home Hub 2.0
-  DEVICE_VARIANT := A
-  CFE_BOARD_ID := HOMEHUB2A
-  CFE_CHIP_ID := 6358
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += bt_home-hub-2-a
-
-define Device/bt_voyager-2110
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := BT
-  DEVICE_MODEL := Voyager 2110
-  CFE_BOARD_ID := V2110
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --layoutver 5
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += bt_voyager-2110
-
-define Device/bt_voyager-2500v-bb
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := BT
-  DEVICE_MODEL := Voyager 2500V
-  CFE_BOARD_ID := V2500V_BB
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --layoutver 5
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += bt_voyager-2500v-bb
-
-### Comtrend ###
-define Device/comtrend_ar-5315u
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := AR-5315u
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96318A-1441N1
-  CFE_CHIP_ID := 6318
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_ar-5315u
-
-define Device/comtrend_ar-5381u
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := AR-5381u
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96328A-1241N
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_ar-5381u
-
-define Device/comtrend_ar-5387un
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := AR-5387un
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96328A-1441N1
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_ar-5387un
-
-define Device/comtrend_ct-536plus
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := CT-536+
-  DEVICE_ALT0_VENDOR := Comtrend
-  DEVICE_ALT0_MODEL := CT-5621
-  CFE_BOARD_ID := 96348GW-11
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += comtrend_ct-536plus
-
-define Device/comtrend_ct-5365
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := CT-5365
-  CFE_BOARD_ID := 96348A-122
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += comtrend_ct-5365
-
-define Device/comtrend_ct-6373
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := CT-6373
-  CFE_BOARD_ID := CT6373-1
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_ct-6373
-
-define Device/comtrend_vr-3025u
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := VR-3025u
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96368M-1541N
-  CFE_CHIP_ID := 6368
-  BLOCK_SIZE := 0x20000
-  FLASH_MB := 32
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_vr-3025u
-
-define Device/comtrend_vr-3025un
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := VR-3025un
-  CFE_BOARD_ID := 96368M-1341N
-  CFE_CHIP_ID := 6368
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_vr-3025un
-
-define Device/comtrend_vr-3026e
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := VR-3026e
-  CFE_BOARD_ID := 96368MT-1341N1
-  CFE_CHIP_ID := 6368
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_vr-3026e
-
-define Device/comtrend_wap-5813n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Comtrend
-  DEVICE_MODEL := WAP-5813n
-  CFE_BOARD_ID := 96369R-1231N
-  CFE_CHIP_ID := 6368
-  FLASH_MB := 8
-  SOC := bcm6369
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += comtrend_wap-5813n
-
-### D-Link ###
-define Device/d-link_dsl-2640b-b
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2640B
-  DEVICE_VARIANT := B2
-  CFE_BOARD_ID := D-4P-W
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += d-link_dsl-2640b-b
-
-define Device/d-link_dsl-2640u
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2640U
-  DEVICE_VARIANT := C1
-  DEVICE_ALT0_VENDOR := D-Link
-  DEVICE_ALT0_MODEL := DSL-2640U/BRU/C
-  CFE_BOARD_ID := 96338W2_E7T
-  CFE_CHIP_ID := 6338
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += d-link_dsl-2640u
-
-define Device/d-link_dsl-2650u
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2650U
-  CFE_BOARD_ID := 96358VW2
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dsl-2650u
-
-define Device/d-link_dsl-274xb-c2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2740B
-  DEVICE_VARIANT := C2
-  DEVICE_ALT0_VENDOR := D-Link
-  DEVICE_ALT0_MODEL := DSL-2741B
-  DEVICE_ALT0_VARIANT := C2
-  CFE_BOARD_ID := 96358GW
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dsl-274xb-c2
-
-define Device/d-link_dsl-274xb-c3
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2740B
-  DEVICE_VARIANT := C3
-  DEVICE_ALT0_VENDOR := D-Link
-  DEVICE_ALT0_MODEL := DSL-2741B
-  DEVICE_ALT0_VARIANT := C3
-  DEVICE_DTS := bcm6358-d-link-dsl-274xb-c2
-  CFE_BOARD_ID := AW4139
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dsl-274xb-c3
-
-define Device/d-link_dsl-274xb-f1
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2740B
-  DEVICE_VARIANT := F1
-  DEVICE_ALT0_VENDOR := D-Link
-  DEVICE_ALT0_MODEL := DSL-2741B
-  DEVICE_ALT0_VARIANT := F1
-  CFE_BOARD_ID := AW4339U
-  CFE_CHIP_ID := 6328
-  IMAGES := cfe-EU.bin cfe-AU.bin
-  IMAGE/cfe-AU.bin := cfe-bin --signature2 "4.06.01.AUF1" --pad 4
-  IMAGE/cfe-EU.bin := cfe-bin --signature2 "4.06.01.EUF1" --pad 4
-  DEVICE_PACKAGES := $(ATH9K_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dsl-274xb-f1
-
-define Device/d-link_dsl-275xb-d1
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DSL-2750B
-  DEVICE_VARIANT := D1
-  DEVICE_ALT0_VENDOR := D-Link
-  DEVICE_ALT0_MODEL := DSL-2751
-  DEVICE_ALT0_VARIANT := D1
-  CFE_BOARD_ID := AW5200B
-  CFE_CHIP_ID := 6318
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dsl-275xb-d1
-
-define Device/d-link_dva-g3810bn-tl
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DVA-G3810BN/TL
-  CFE_BOARD_ID := 96358VW
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += d-link_dva-g3810bn-tl
-
-### Davolink ###
-define Device/davolink_dv-201amr
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Davolink
-  DEVICE_MODEL := DV-201AMR
-  IMAGES := cfe-old.bin
-  CFE_BOARD_ID := DV201AMR
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += davolink_dv-201amr
-
-### Dynalink ###
-define Device/dynalink_rta770bw
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Dynalink
-  DEVICE_MODEL := RTA770BW
-  DEVICE_ALT0_VENDOR := Siemens
-  DEVICE_ALT0_MODEL := SE515
-  IMAGES =
-  CFE_BOARD_ID := RTA770BW
-  CFE_CHIP_ID := 6345
-  CFE_EXTRAS += --layoutver 5
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += dynalink_rta770bw
-
-define Device/dynalink_rta770w
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Dynalink
-  DEVICE_MODEL := RTA770W
-  IMAGES =
-  CFE_BOARD_ID := RTA770W
-  CFE_CHIP_ID := 6345
-  CFE_EXTRAS += --layoutver 5
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += dynalink_rta770w
-
-define Device/dynalink_rta1025w
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Dynalink
-  DEVICE_MODEL := RTA1025W
-  CFE_BOARD_ID := RTA1025W_16
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --layoutver 5
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += dynalink_rta1025w
-
-define Device/dynalink_rta1320
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Dynalink
-  DEVICE_MODEL := RTA1320
-  CFE_BOARD_ID := RTA1320_16M
-  CFE_CHIP_ID := 6338
-  CFE_EXTRAS += --layoutver 5
-  DEFAULT := n
-endef
-TARGET_DEVICES += dynalink_rta1320
-
-### Huawei ###
-define Device/huawei_echolife-hg520v
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG520v
-  CFE_BOARD_ID := HW6358GW_B
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG520v"
-  SOC := bcm6359
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg520v
-
-define Device/huawei_echolife-hg553
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG553
-  CFE_BOARD_ID := HW553
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG553" --tag-version 7
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg553
-
-define Device/huawei_echolife-hg556a-a
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG556a
-  DEVICE_VARIANT := A
-  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version A (Atheros)
-  CFE_BOARD_ID := HW556
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
-  IMAGE_OFFSET := 0x20000
-  DEVICE_PACKAGES := $(ATH9K_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg556a-a
-
-define Device/huawei_echolife-hg556a-b
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG556a
-  DEVICE_VARIANT := B
-  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version B (Atheros)
-  CFE_BOARD_ID := HW556
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(ATH9K_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg556a-b
-
-define Device/huawei_echolife-hg556a-c
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG556a
-  DEVICE_VARIANT := C
-  DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version C (Ralink)
-  CFE_BOARD_ID := HW556
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg556a-c
-
-define Device/huawei_echolife-hg622
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG622
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96368MVWG_hg622
-  CFE_CHIP_ID := 6368
-  CFE_EXTRAS += --tag-version 7
-  BLOCK_SIZE := 0x20000
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg622
-
-define Device/huawei_echolife-hg655b
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Huawei
-  DEVICE_MODEL := EchoLife HG655b
-  CFE_BOARD_ID := HW65x
-  CFE_CHIP_ID := 6368
-  CFE_EXTRAS += --tag-version 7
-  IMAGE_OFFSET := 0x20000
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(RT28_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += huawei_echolife-hg655b
-
-### Inteno ###
-define Device/inteno_vg50
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Inteno
-  DEVICE_MODEL := VG50 Multi-WAN CPE
-  IMAGES :=
-  CFE_BOARD_ID := VW6339GU
-  CFE_CHIP_ID := 63268
-  DEVICE_PACKAGES := $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += inteno_vg50
-
-### Inventel ###
-define Device/inventel_livebox-1
-  $(Device/bcm63xx_redboot)
-  DEVICE_VENDOR := Inventel
-  DEVICE_MODEL := Livebox 1
-  SOC := bcm6348
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB1_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += inventel_livebox-1
-
-### Netgear ###
-define Device/netgear_cvg834g
-  $(Device/bcm33xx)
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := CVG834G
-  SOC := bcm3368
-  HCS_MAGIC_BYTES := 0xa020
-  HCS_REV_MIN := 0001
-  HCS_REV_MAJ := 0022
-endef
-TARGET_DEVICES += netgear_cvg834g
-
-define Device/netgear_dg834gt-pn
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := DG834GT
-  DEVICE_ALT0_VENDOR := NETGEAR
-  DEVICE_ALT0_MODEL := DG834PN
-  CFE_BOARD_ID := 96348GW-10
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(ATH5K_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += netgear_dg834gt-pn
-
-define Device/netgear_dg834g-v4
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := NETGEAR
-  DEVICE_MODEL := DG834G
-  DEVICE_VARIANT := v4
-  IMAGES :=
-  CFE_BOARD_ID := 96348W3
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += netgear_dg834g-v4
-
-define Device/netgear_dgnd3700-v1
-  $(Device/bcm63xx_netgear)
-  DEVICE_MODEL := DGND3700
-  DEVICE_VARIANT := v1
-  CFE_BOARD_ID := 96368MVWG
-  CFE_CHIP_ID := 6368
-  BLOCK_SIZE := 0x20000
-  NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
-  NETGEAR_REGION := 1
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += netgear_dgnd3700-v1
-
-define Device/netgear_dgnd3800b
-  $(Device/bcm63xx_netgear)
-  DEVICE_MODEL := DGND3800B
-  DEVICE_DTS := bcm6368-netgear-dgnd3700-v1
-  CFE_BOARD_ID := 96368MVWG
-  CFE_CHIP_ID := 6368
-  BLOCK_SIZE := 0x20000
-  NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
-  NETGEAR_REGION := 1
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += netgear_dgnd3800b
-
-define Device/netgear_evg2000
-  $(Device/bcm63xx_netgear)
-  DEVICE_MODEL := EVG2000
-  CFE_BOARD_ID := 96369PVG
-  CFE_CHIP_ID := 6368
-  BLOCK_SIZE := 0x20000
-  NETGEAR_BOARD_ID := U12H154T90_NETGEAR
-  NETGEAR_REGION := 1
-  SOC := bcm6369
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += netgear_evg2000
-
-### NuCom ###
-define Device/nucom_r5010un-v2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := NuCom
-  DEVICE_MODEL := R5010UN
-  DEVICE_VARIANT := v2
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96328ang
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 16
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += nucom_r5010un-v2
-
-### Observa ###
-define Device/observa_vh4032n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Observa
-  DEVICE_MODEL := VH4032N
-  IMAGES += sysupgrade.bin
-  CFE_BOARD_ID := 96368VVW
-  CFE_CHIP_ID := 6368
-  BLOCK_SIZE := 0x20000
-  FLASH_MB := 32
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += observa_vh4032n
-
-### Pirelli ###
-define Device/pirelli_a226g
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Pirelli
-  DEVICE_MODEL := A226G
-  CFE_BOARD_ID := DWV-S0
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += pirelli_a226g
-
-define Device/pirelli_a226m
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Pirelli
-  DEVICE_MODEL := A226M
-  CFE_BOARD_ID := DWV-S0
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
-  DEVICE_PACKAGES := $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += pirelli_a226m
-
-define Device/pirelli_a226m-fwb
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Pirelli
-  DEVICE_MODEL := A226M-FWB
-  CFE_BOARD_ID := DWV-S0
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += pirelli_a226m-fwb
-
-define Device/pirelli_agpf-s0
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Pirelli
-  DEVICE_MODEL := Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
-  CFE_BOARD_ID := AGPF-S0
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --signature2 IMAGE --tag-version 8
-  BLOCK_SIZE := 0x20000
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += pirelli_agpf-s0
-
-### Sagem ###
-define Device/sagem_fast-2404
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sagemcom
-  DEVICE_MODEL := F@st 2404
-  CFE_BOARD_ID := F@ST2404
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += sagem_fast-2404
-
-define Device/sagem_fast-2504n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sagemcom
-  DEVICE_MODEL := F@st 2504N
-  CFE_BOARD_ID := F@ST2504n
-  CFE_CHIP_ID := 6362
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += sagem_fast-2504n
-
-define Device/sagem_fast-2604
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sagemcom
-  DEVICE_MODEL := F@st 2604
-  CFE_BOARD_ID := F@ST2604
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += sagem_fast-2604
-
-define Device/sagem_fast-2704n
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sagemcom
-  DEVICE_MODEL := F@st 2704N
-  CFE_BOARD_ID := F@ST2704N
-  CFE_CHIP_ID := 6318
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sagem_fast-2704n
-
-define Device/sagem_fast-2704-v2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sagemcom
-  DEVICE_MODEL := F@st 2704
-  DEVICE_VARIANT := V2
-  CFE_BOARD_ID := F@ST2704V2
-  CFE_CHIP_ID := 6328
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sagem_fast-2704-v2
-
-### Sercomm ###
-define Device/sercomm_ad1018-nor
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Sercomm
-  DEVICE_MODEL := AD1018
-  DEVICE_VARIANT := SPI flash mod
-  CFE_BOARD_ID := 96328avngr
-  CFE_CHIP_ID := 6328
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sercomm_ad1018-nor
-
-### SFR ###
-define Device/sfr_neufbox-4-sercomm-r0
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := SFR
-  DEVICE_MODEL := Neufbox 4
-  DEVICE_VARIANT := Sercomm
-  CFE_BOARD_ID := 96358VW
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sfr_neufbox-4-sercomm-r0
-
-define Device/sfr_neufbox-4-foxconn-r1
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := SFR
-  DEVICE_MODEL := Neufbox 4
-  DEVICE_VARIANT := Foxconn
-  CFE_BOARD_ID := 96358VW
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sfr_neufbox-4-foxconn-r1
-
-define Device/sfr_neufbox-6-sercomm-r0
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := SFR
-  DEVICE_MODEL := Neufbox 6
-  CFE_BOARD_ID := NB6-SER-r0
-  CFE_CHIP_ID := 6362
-  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
-  SOC := bcm6361
-  DEVICE_PACKAGES := $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sfr_neufbox-6-sercomm-r0
-
-define Device/sky_sr102
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := SKY
-  DEVICE_MODEL := SR102
-  CFE_BOARD_ID := BSKYB_63168
-  CFE_CHIP_ID := 63268
-  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
-  SOC := bcm63168
-  DEVICE_PACKAGES := $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += sky_sr102
-
-### T-Com ###
-define Device/t-com_speedport-w-303v
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := T-Com
-  DEVICE_MODEL := Speedport W 303V
-  IMAGES := factory.bin sysupgrade.bin
-  IMAGE/factory.bin := cfe-spw303v-bin --pad 4 | spw303v-bin | xor-image
-  IMAGE/sysupgrade.bin := cfe-spw303v-bin | spw303v-bin
-  CFE_BOARD_ID := 96358-502V
-  CFE_CHIP_ID := 6358
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += t-com_speedport-w-303v
-
-define Device/t-com_speedport-w-500v
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := T-Com
-  DEVICE_MODEL := Speedport W 500V
-  CFE_BOARD_ID := 96348GW
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += t-com_speedport-w-500v
-
-### Tecom ###
-define Device/tecom_gw6000
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Tecom
-  DEVICE_MODEL := GW6000
-  CFE_BOARD_ID := 96348GW
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(BRCMWL_PACKAGES) $(USB1_PACKAGES)
-endef
-TARGET_DEVICES += tecom_gw6000
-
-define Device/tecom_gw6200
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Tecom
-  DEVICE_MODEL := GW6200
-  CFE_BOARD_ID := 96348GW
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --rsa-signature "$(shell printf '\x99')"
-  DEVICE_PACKAGES := $(BRCMWL_PACKAGES) $(USB1_PACKAGES)
-endef
-TARGET_DEVICES += tecom_gw6200
-
-### Telsey ###
-define Device/telsey_cpva502plus
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Telsey
-  DEVICE_MODEL := CPVA502+
-  CFE_BOARD_ID := CPVA502+
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999"
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += telsey_cpva502plus
-
-define Device/telsey_cpva642
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Telsey
-  DEVICE_MODEL := CPVA642-type (CPA-ZNTE60T)
-  CFE_BOARD_ID := CPVA642
-  CFE_CHIP_ID := 6358
-  CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0"
-  FLASH_MB := 8
-  DEVICE_PACKAGES := $(RT63_PACKAGES) $(USB2_PACKAGES)
-endef
-TARGET_DEVICES += telsey_cpva642
-
-define Device/telsey_magic
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := Alice
-  DEVICE_MODEL := W-Gate
-  DEVICE_ALT0_VENDOR := Telsey
-  DEVICE_ALT0_MODEL := MAGIC
-  IMAGES :=
-  CFE_BOARD_ID := MAGIC
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(RT63_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += telsey_magic
-
-### TP-Link ###
-define Device/tp-link_td-w8900gb
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := TP-Link
-  DEVICE_MODEL := TD-W8900GB
-  CFE_BOARD_ID := 96348GW-11
-  CFE_CHIP_ID := 6348
-  CFE_EXTRAS += --rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')"
-  IMAGE_OFFSET := 0x20000
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += tp-link_td-w8900gb
-
-### USRobotics ###
-define Device/usrobotics_usr9108
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := USRobotics
-  DEVICE_MODEL := USR9108
-  CFE_BOARD_ID := 96348GW-A
-  CFE_CHIP_ID := 6348
-  DEVICE_PACKAGES := $(B43_PACKAGES) $(USB1_PACKAGES)
-  DEFAULT := n
-endef
-TARGET_DEVICES += usrobotics_usr9108
-
-### ZyXEL ###
-define Device/zyxel_p870hw-51a-v2
-  $(Device/bcm63xx)
-  DEVICE_VENDOR := ZyXEL
-  DEVICE_MODEL := P870HW-51a
-  DEVICE_VARIANT := v2
-  IMAGES := factory.bin
-  IMAGE/factory.bin := cfe-bin | zyxel-bin
-  CFE_BOARD_ID := 96368VVW
-  CFE_CHIP_ID := 6368
-  CFE_EXTRAS += --rsa-signature "ZyXEL" --signature "ZyXEL_0001"
-  DEVICE_PACKAGES := $(B43_PACKAGES)
-endef
-TARGET_DEVICES += zyxel_p870hw-51a-v2
diff --git a/target/linux/brcm63xx/image/lzma-loader/Makefile b/target/linux/brcm63xx/image/lzma-loader/Makefile
deleted file mode 100644 (file)
index 8d36691..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-LZMA_TEXT_START        := 0x80a00000
-LOADER         := loader.bin
-LOADER_NAME    := $(basename $(notdir $(LOADER)))
-LOADER_DATA    :=
-TARGET_DIR     :=
-FLASH_OFFS     :=
-FLASH_MAX      :=
-
-ifeq ($(TARGET_DIR),)
-TARGET_DIR     := $(KDIR)
-endif
-
-LOADER_BIN     := $(TARGET_DIR)/$(LOADER_NAME).bin
-LOADER_GZ      := $(TARGET_DIR)/$(LOADER_NAME).gz
-LOADER_ELF     := $(TARGET_DIR)/$(LOADER_NAME).elf
-
-PKG_NAME := lzma-loader
-PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
-
-.PHONY : loader-compile loader.bin loader.elf loader.gz
-
-$(PKG_BUILD_DIR)/.prepared:
-       mkdir $(PKG_BUILD_DIR)
-       $(CP) ./src/* $(PKG_BUILD_DIR)/
-       touch $@
-
-loader-compile: $(PKG_BUILD_DIR)/.prepared
-       $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
-               LZMA_TEXT_START=$(LZMA_TEXT_START) \
-               LOADER_DATA=$(LOADER_DATA) \
-               FLASH_OFFS=$(FLASH_OFFS) \
-               FLASH_MAX=$(FLASH_MAX) \
-               clean all
-
-loader.gz: $(PKG_BUILD_DIR)/loader.bin
-       gzip -nc9 $< > $(LOADER_GZ)
-
-loader.elf: $(PKG_BUILD_DIR)/loader.elf
-       $(CP) $< $(LOADER_ELF)
-
-loader.bin: $(PKG_BUILD_DIR)/loader.bin
-       $(CP) $< $(LOADER_BIN)
-
-download:
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: loader-compile
-
-install:
-
-clean:
-       rm -rf $(PKG_BUILD_DIR)
-
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.c
deleted file mode 100644 (file)
index cb83453..0000000
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
-  LzmaDecode.c
-  LZMA Decoder (optimized for Speed version)
-  
-  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this Code, expressly permits you to 
-  statically or dynamically link your Code (or bind by name) to the 
-  interfaces of this file without subjecting your linked Code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
-  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
-  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
-  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
-  { UpdateBit0(p); mi <<= 1; A0; } else \
-  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
-  
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
-  { int i = numLevels; res = 1; \
-  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
-  res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
-  unsigned char prop0;
-  if (size < LZMA_PROPERTIES_SIZE)
-    return LZMA_RESULT_DATA_ERROR;
-  prop0 = propsData[0];
-  if (prop0 >= (9 * 5 * 5))
-    return LZMA_RESULT_DATA_ERROR;
-  {
-    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
-    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
-    propsRes->lc = prop0;
-    /*
-    unsigned char remainder = (unsigned char)(prop0 / 9);
-    propsRes->lc = prop0 % 9;
-    propsRes->pb = remainder / 5;
-    propsRes->lp = remainder % 5;
-    */
-  }
-
-  #ifdef _LZMA_OUT_READ
-  {
-    int i;
-    propsRes->DictionarySize = 0;
-    for (i = 0; i < 4; i++)
-      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
-    if (propsRes->DictionarySize == 0)
-      propsRes->DictionarySize = 1;
-  }
-  #endif
-  return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *InCallback,
-    #else
-    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
-    #endif
-    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
-  CProb *p = vs->Probs;
-  SizeT nowPos = 0;
-  Byte previousByte = 0;
-  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
-  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
-  int lc = vs->Properties.lc;
-
-  #ifdef _LZMA_OUT_READ
-  
-  UInt32 Range = vs->Range;
-  UInt32 Code = vs->Code;
-  #ifdef _LZMA_IN_CB
-  const Byte *Buffer = vs->Buffer;
-  const Byte *BufferLim = vs->BufferLim;
-  #else
-  const Byte *Buffer = inStream;
-  const Byte *BufferLim = inStream + inSize;
-  #endif
-  int state = vs->State;
-  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
-  int len = vs->RemainLen;
-  UInt32 globalPos = vs->GlobalPos;
-  UInt32 distanceLimit = vs->DistanceLimit;
-
-  Byte *dictionary = vs->Dictionary;
-  UInt32 dictionarySize = vs->Properties.DictionarySize;
-  UInt32 dictionaryPos = vs->DictionaryPos;
-
-  Byte tempDictionary[4];
-
-  #ifndef _LZMA_IN_CB
-  *inSizeProcessed = 0;
-  #endif
-  *outSizeProcessed = 0;
-  if (len == kLzmaStreamWasFinishedId)
-    return LZMA_RESULT_OK;
-
-  if (dictionarySize == 0)
-  {
-    dictionary = tempDictionary;
-    dictionarySize = 1;
-    tempDictionary[0] = vs->TempDictionary[0];
-  }
-
-  if (len == kLzmaNeedInitId)
-  {
-    {
-      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
-      UInt32 i;
-      for (i = 0; i < numProbs; i++)
-        p[i] = kBitModelTotal >> 1; 
-      rep0 = rep1 = rep2 = rep3 = 1;
-      state = 0;
-      globalPos = 0;
-      distanceLimit = 0;
-      dictionaryPos = 0;
-      dictionary[dictionarySize - 1] = 0;
-      #ifdef _LZMA_IN_CB
-      RC_INIT;
-      #else
-      RC_INIT(inStream, inSize);
-      #endif
-    }
-    len = 0;
-  }
-  while(len != 0 && nowPos < outSize)
-  {
-    UInt32 pos = dictionaryPos - rep0;
-    if (pos >= dictionarySize)
-      pos += dictionarySize;
-    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
-    if (++dictionaryPos == dictionarySize)
-      dictionaryPos = 0;
-    len--;
-  }
-  if (dictionaryPos == 0)
-    previousByte = dictionary[dictionarySize - 1];
-  else
-    previousByte = dictionary[dictionaryPos - 1];
-
-  #else /* if !_LZMA_OUT_READ */
-
-  int state = 0;
-  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
-  int len = 0;
-  const Byte *Buffer;
-  const Byte *BufferLim;
-  UInt32 Range;
-  UInt32 Code;
-
-  #ifndef _LZMA_IN_CB
-  *inSizeProcessed = 0;
-  #endif
-  *outSizeProcessed = 0;
-
-  {
-    UInt32 i;
-    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
-    for (i = 0; i < numProbs; i++)
-      p[i] = kBitModelTotal >> 1;
-  }
-  
-  #ifdef _LZMA_IN_CB
-  RC_INIT;
-  #else
-  RC_INIT(inStream, inSize);
-  #endif
-
-  #endif /* _LZMA_OUT_READ */
-
-  while(nowPos < outSize)
-  {
-    CProb *prob;
-    UInt32 bound;
-    int posState = (int)(
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & posStateMask);
-
-    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
-    IfBit0(prob)
-    {
-      int symbol = 1;
-      UpdateBit0(prob)
-      prob = p + Literal + (LZMA_LIT_SIZE * 
-        (((
-        (nowPos 
-        #ifdef _LZMA_OUT_READ
-        + globalPos
-        #endif
-        )
-        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
-      if (state >= kNumLitStates)
-      {
-        int matchByte;
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        matchByte = dictionary[pos];
-        #else
-        matchByte = outStream[nowPos - rep0];
-        #endif
-        do
-        {
-          int bit;
-          CProb *probLit;
-          matchByte <<= 1;
-          bit = (matchByte & 0x100);
-          probLit = prob + 0x100 + bit + symbol;
-          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
-        }
-        while (symbol < 0x100);
-      }
-      while (symbol < 0x100)
-      {
-        CProb *probLit = prob + symbol;
-        RC_GET_BIT(probLit, symbol)
-      }
-      previousByte = (Byte)symbol;
-
-      outStream[nowPos++] = previousByte;
-      #ifdef _LZMA_OUT_READ
-      if (distanceLimit < dictionarySize)
-        distanceLimit++;
-
-      dictionary[dictionaryPos] = previousByte;
-      if (++dictionaryPos == dictionarySize)
-        dictionaryPos = 0;
-      #endif
-      if (state < 4) state = 0;
-      else if (state < 10) state -= 3;
-      else state -= 6;
-    }
-    else             
-    {
-      UpdateBit1(prob);
-      prob = p + IsRep + state;
-      IfBit0(prob)
-      {
-        UpdateBit0(prob);
-        rep3 = rep2;
-        rep2 = rep1;
-        rep1 = rep0;
-        state = state < kNumLitStates ? 0 : 3;
-        prob = p + LenCoder;
-      }
-      else
-      {
-        UpdateBit1(prob);
-        prob = p + IsRepG0 + state;
-        IfBit0(prob)
-        {
-          UpdateBit0(prob);
-          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
-          IfBit0(prob)
-          {
-            #ifdef _LZMA_OUT_READ
-            UInt32 pos;
-            #endif
-            UpdateBit0(prob);
-            
-            #ifdef _LZMA_OUT_READ
-            if (distanceLimit == 0)
-            #else
-            if (nowPos == 0)
-            #endif
-              return LZMA_RESULT_DATA_ERROR;
-            
-            state = state < kNumLitStates ? 9 : 11;
-            #ifdef _LZMA_OUT_READ
-            pos = dictionaryPos - rep0;
-            if (pos >= dictionarySize)
-              pos += dictionarySize;
-            previousByte = dictionary[pos];
-            dictionary[dictionaryPos] = previousByte;
-            if (++dictionaryPos == dictionarySize)
-              dictionaryPos = 0;
-            #else
-            previousByte = outStream[nowPos - rep0];
-            #endif
-            outStream[nowPos++] = previousByte;
-            #ifdef _LZMA_OUT_READ
-            if (distanceLimit < dictionarySize)
-              distanceLimit++;
-            #endif
-
-            continue;
-          }
-          else
-          {
-            UpdateBit1(prob);
-          }
-        }
-        else
-        {
-          UInt32 distance;
-          UpdateBit1(prob);
-          prob = p + IsRepG1 + state;
-          IfBit0(prob)
-          {
-            UpdateBit0(prob);
-            distance = rep1;
-          }
-          else 
-          {
-            UpdateBit1(prob);
-            prob = p + IsRepG2 + state;
-            IfBit0(prob)
-            {
-              UpdateBit0(prob);
-              distance = rep2;
-            }
-            else
-            {
-              UpdateBit1(prob);
-              distance = rep3;
-              rep3 = rep2;
-            }
-            rep2 = rep1;
-          }
-          rep1 = rep0;
-          rep0 = distance;
-        }
-        state = state < kNumLitStates ? 8 : 11;
-        prob = p + RepLenCoder;
-      }
-      {
-        int numBits, offset;
-        CProb *probLen = prob + LenChoice;
-        IfBit0(probLen)
-        {
-          UpdateBit0(probLen);
-          probLen = prob + LenLow + (posState << kLenNumLowBits);
-          offset = 0;
-          numBits = kLenNumLowBits;
-        }
-        else
-        {
-          UpdateBit1(probLen);
-          probLen = prob + LenChoice2;
-          IfBit0(probLen)
-          {
-            UpdateBit0(probLen);
-            probLen = prob + LenMid + (posState << kLenNumMidBits);
-            offset = kLenNumLowSymbols;
-            numBits = kLenNumMidBits;
-          }
-          else
-          {
-            UpdateBit1(probLen);
-            probLen = prob + LenHigh;
-            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-            numBits = kLenNumHighBits;
-          }
-        }
-        RangeDecoderBitTreeDecode(probLen, numBits, len);
-        len += offset;
-      }
-
-      if (state < 4)
-      {
-        int posSlot;
-        state += kNumLitStates;
-        prob = p + PosSlot +
-            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
-            kNumPosSlotBits);
-        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
-        if (posSlot >= kStartPosModelIndex)
-        {
-          int numDirectBits = ((posSlot >> 1) - 1);
-          rep0 = (2 | ((UInt32)posSlot & 1));
-          if (posSlot < kEndPosModelIndex)
-          {
-            rep0 <<= numDirectBits;
-            prob = p + SpecPos + rep0 - posSlot - 1;
-          }
-          else
-          {
-            numDirectBits -= kNumAlignBits;
-            do
-            {
-              RC_NORMALIZE
-              Range >>= 1;
-              rep0 <<= 1;
-              if (Code >= Range)
-              {
-                Code -= Range;
-                rep0 |= 1;
-              }
-            }
-            while (--numDirectBits != 0);
-            prob = p + Align;
-            rep0 <<= kNumAlignBits;
-            numDirectBits = kNumAlignBits;
-          }
-          {
-            int i = 1;
-            int mi = 1;
-            do
-            {
-              CProb *prob3 = prob + mi;
-              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
-              i <<= 1;
-            }
-            while(--numDirectBits != 0);
-          }
-        }
-        else
-          rep0 = posSlot;
-        if (++rep0 == (UInt32)(0))
-        {
-          /* it's for stream version */
-          len = kLzmaStreamWasFinishedId;
-          break;
-        }
-      }
-
-      len += kMatchMinLen;
-      #ifdef _LZMA_OUT_READ
-      if (rep0 > distanceLimit) 
-      #else
-      if (rep0 > nowPos)
-      #endif
-        return LZMA_RESULT_DATA_ERROR;
-
-      #ifdef _LZMA_OUT_READ
-      if (dictionarySize - distanceLimit > (UInt32)len)
-        distanceLimit += len;
-      else
-        distanceLimit = dictionarySize;
-      #endif
-
-      do
-      {
-        #ifdef _LZMA_OUT_READ
-        UInt32 pos = dictionaryPos - rep0;
-        if (pos >= dictionarySize)
-          pos += dictionarySize;
-        previousByte = dictionary[pos];
-        dictionary[dictionaryPos] = previousByte;
-        if (++dictionaryPos == dictionarySize)
-          dictionaryPos = 0;
-        #else
-        previousByte = outStream[nowPos - rep0];
-        #endif
-        len--;
-        outStream[nowPos++] = previousByte;
-      }
-      while(len != 0 && nowPos < outSize);
-    }
-  }
-  RC_NORMALIZE;
-
-  #ifdef _LZMA_OUT_READ
-  vs->Range = Range;
-  vs->Code = Code;
-  vs->DictionaryPos = dictionaryPos;
-  vs->GlobalPos = globalPos + (UInt32)nowPos;
-  vs->DistanceLimit = distanceLimit;
-  vs->Reps[0] = rep0;
-  vs->Reps[1] = rep1;
-  vs->Reps[2] = rep2;
-  vs->Reps[3] = rep3;
-  vs->State = state;
-  vs->RemainLen = len;
-  vs->TempDictionary[0] = tempDictionary[0];
-  #endif
-
-  #ifdef _LZMA_IN_CB
-  vs->Buffer = Buffer;
-  vs->BufferLim = BufferLim;
-  #else
-  *inSizeProcessed = (SizeT)(Buffer - inStream);
-  #endif
-  *outSizeProcessed = nowPos;
-  return LZMA_RESULT_OK;
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.h
deleted file mode 100644 (file)
index 2870eeb..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/* 
-  LzmaDecode.h
-  LZMA Decoder interface
-
-  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
-  http://www.7-zip.org/
-
-  LZMA SDK is licensed under two licenses:
-  1) GNU Lesser General Public License (GNU LGPL)
-  2) Common Public License (CPL)
-  It means that you can select one of these two licenses and 
-  follow rules of that license.
-
-  SPECIAL EXCEPTION:
-  Igor Pavlov, as the author of this code, expressly permits you to 
-  statically or dynamically link your code (or bind by name) to the 
-  interfaces of this file without subjecting your linked code to the 
-  terms of the CPL or GNU LGPL. Any modifications or additions 
-  to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs, 
-   but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
-  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
-  int lc;
-  int lp;
-  int pb;
-  #ifdef _LZMA_OUT_READ
-  UInt32 DictionarySize;
-  #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
-  CLzmaProperties Properties;
-  CProb *Probs;
-
-  #ifdef _LZMA_IN_CB
-  const unsigned char *Buffer;
-  const unsigned char *BufferLim;
-  #endif
-
-  #ifdef _LZMA_OUT_READ
-  unsigned char *Dictionary;
-  UInt32 Range;
-  UInt32 Code;
-  UInt32 DictionaryPos;
-  UInt32 GlobalPos;
-  UInt32 DistanceLimit;
-  UInt32 Reps[4];
-  int State;
-  int RemainLen;
-  unsigned char TempDictionary[4];
-  #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
-    #ifdef _LZMA_IN_CB
-    ILzmaInCallback *inCallback,
-    #else
-    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
-    #endif
-    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/LzmaTypes.h b/target/linux/brcm63xx/image/lzma-loader/src/LzmaTypes.h
deleted file mode 100644 (file)
index 9c27290..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-/* 
-LzmaTypes.h 
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif 
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif 
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif 
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/Makefile b/target/linux/brcm63xx/image/lzma-loader/src/Makefile
deleted file mode 100644 (file)
index 167bf64..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# Makefile for the LZMA compressed kernel loader for
-# Atheros AR7XXX/AR9XXX based boards
-#
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# Some parts of this file was based on the OpenWrt specific lzma-loader
-# for the BCM47xx and ADM5120 based boards:
-#      Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
-#      Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
-#      Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-#
-
-LOADADDR       :=
-LZMA_TEXT_START        := 0x80a00000
-LOADER_DATA    :=
-
-CC             := $(CROSS_COMPILE)gcc
-LD             := $(CROSS_COMPILE)ld
-OBJCOPY                := $(CROSS_COMPILE)objcopy
-OBJDUMP                := $(CROSS_COMPILE)objdump
-
-BIN_FLAGS      := -O binary -R .reginfo -R .note -R .comment -R .mdebug \
-                  -R .MIPS.abiflags -S
-
-CFLAGS         = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
-                 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
-                 -mno-abicalls -fno-pic -ffunction-sections -pipe \
-                 -ffreestanding -fhonour-copts \
-                 -mabi=32 -march=mips32 \
-                 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-CFLAGS         += -D_LZMA_PROB32
-
-ASFLAGS                = $(CFLAGS) -D__ASSEMBLY__
-
-LDFLAGS                = -static --gc-sections -no-warn-mismatch
-LDFLAGS                += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START)
-
-O_FORMAT       = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
-
-OBJECTS                := head.o loader.o cache.o board.o printf.o LzmaDecode.o
-
-ifneq ($(strip $(LOADER_DATA)),)
-OBJECTS                += data.o
-CFLAGS         += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
-endif
-
-
-all: loader.elf
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-%.o : %.c
-       $(CC) $(CFLAGS) -c -o $@ $<
-
-%.o : %.S
-       $(CC) $(ASFLAGS) -c -o $@ $<
-
-data.o: $(LOADER_DATA)
-       $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
-
-loader: $(OBJECTS)
-       $(LD) $(LDFLAGS) -o $@ $(OBJECTS)
-
-loader.bin: loader
-       $(OBJCOPY) $(BIN_FLAGS) $< $@
-
-loader2.o: loader.bin
-       $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
-
-loader.elf: loader2.o
-       $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
-
-mrproper: clean
-
-clean:
-       rm -f loader *.elf *.bin *.o
-
-
-
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/board.c b/target/linux/brcm63xx/image/lzma-loader/src/board.c
deleted file mode 100644 (file)
index 6a1b132..0000000
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * BCM63XX specific implementation parts
- *
- * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include "config.h"
-#include "cp0regdef.h"
-
-#define READREG(r)     *(volatile unsigned int *)(r)
-#define WRITEREG(r,v)  *(volatile unsigned int *)(r) = v
-
-#define UART_IR_REG    0x10
-#define UART_FIFO_REG  0x14
-
-unsigned long uart_base;
-
-static void wait_xfered(void)
-{
-        unsigned int val;
-
-        do {
-                val = READREG(uart_base + UART_IR_REG);
-                if (val & (1 << 5))
-                        break;
-        } while (1);
-}
-
-void board_putc(int ch)
-{
-       if (!uart_base)
-               return;
-
-       wait_xfered();
-        WRITEREG(uart_base + UART_FIFO_REG, ch);
-       wait_xfered();
-}
-
-#define PRID_IMP_BMIPS32_REV4  0x4000
-#define PRID_IMP_BMIPS32_REV8  0x8000
-#define PRID_IMP_BMIPS3300     0x9000
-#define PRID_IMP_BMIPS3300_ALT 0x9100
-#define PRID_IMP_BMIPS3300_BUG 0x0000
-#define PRID_IMP_BMIPS43XX     0xa000
-
-void board_init(void)
-{
-       unsigned long prid, chipid, chipid_reg;
-
-       prid = read_32bit_c0_register($15, 0);
-
-       switch (prid & 0xff00) {
-       case PRID_IMP_BMIPS32_REV4:
-       case PRID_IMP_BMIPS32_REV8:
-       case PRID_IMP_BMIPS3300_ALT:
-       case PRID_IMP_BMIPS3300_BUG:
-               chipid_reg = 0xfffe0000;
-               break;
-       case PRID_IMP_BMIPS3300:
-               if ((prid & 0xff) >= 0x33)
-                       chipid_reg = 0xb0000000;
-               else
-                       chipid_reg = 0xfffe0000;
-               break;
-       case PRID_IMP_BMIPS43XX:
-               if ((prid & 0xff) == 0x04)
-                       chipid_reg = 0xfff8c000;
-               else if ((prid & 0xff) == 0x70)
-                       return; /* FIXME: 0002a070 can be 6362 and 3380 */
-               else if ((prid & 0xff) >= 0x30)
-                       chipid_reg = 0xb0000000;
-               else
-                       chipid_reg = 0xfffe0000;
-               break;
-       default:
-               return;
-       }
-
-       chipid = READREG(chipid_reg);
-
-       switch (chipid >> 16) {
-       case 0x3368:
-       case 0x6318:
-       case 0x6328:
-       case 0x6358:
-       case 0x6362:
-       case 0x6368:
-       case 0x6369:
-               uart_base = chipid_reg + 0x100;
-               break;
-       case 0x6316:
-       case 0x6326:
-               uart_base = chipid_reg + 0x180;
-               break;
-       case 0x3380:
-               uart_base = chipid_reg + 0x200;
-               break;
-       case 0x6338:
-       case 0x6345:
-       case 0x6348:
-               uart_base = chipid_reg + 0x300;
-               break;
-       default:
-               return;
-       }
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/cache.c b/target/linux/brcm63xx/image/lzma-loader/src/cache.c
deleted file mode 100644 (file)
index 93751c3..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * The cache manipulation routine has been taken from the U-Boot project.
- *     (C) Copyright 2003
- *     Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cache.h"
-#include "cacheops.h"
-#include "config.h"
-#include "printf.h"
-
-#define cache_op(op,addr)                                              \
-       __asm__ __volatile__(                                           \
-       "       .set    push                                    \n"     \
-       "       .set    noreorder                               \n"     \
-       "       .set    mips3\n\t                               \n"     \
-       "       cache   %0, %1                                  \n"     \
-       "       .set    pop                                     \n"     \
-       :                                                               \
-       : "i" (op), "R" (*(unsigned char *)(addr)))
-
-void flush_cache(unsigned long start_addr, unsigned long size)
-{
-       unsigned long lsize = CONFIG_CACHELINE_SIZE;
-       unsigned long addr = start_addr & ~(lsize - 1);
-       unsigned long aend = (start_addr + size + (lsize - 1)) & ~(lsize - 1);
-
-       printf("blasting from 0x%08x to 0x%08x (0x%08x - 0x%08x)\n", start_addr, size, addr, aend);
-
-       while (1) {
-               cache_op(Hit_Writeback_Inv_D, addr);
-               cache_op(Hit_Invalidate_I, addr);
-               if (addr == aend)
-                       break;
-               addr += lsize;
-       }
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/cache.h b/target/linux/brcm63xx/image/lzma-loader/src/cache.h
deleted file mode 100644 (file)
index 506a235..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef __CACHE_H
-#define __CACHE_H
-
-void flush_cache(unsigned long start_addr, unsigned long size);
-
-#endif /* __CACHE_H */
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/cacheops.h b/target/linux/brcm63xx/image/lzma-loader/src/cacheops.h
deleted file mode 100644 (file)
index 70bcad7..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Cache operations for the cache instruction.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
- * (C) Copyright 1999 Silicon Graphics, Inc.
- */
-#ifndef        __ASM_CACHEOPS_H
-#define        __ASM_CACHEOPS_H
-
-/*
- * Cache Operations available on all MIPS processors with R4000-style caches
- */
-#define Index_Invalidate_I      0x00
-#define Index_Writeback_Inv_D   0x01
-#define Index_Load_Tag_I       0x04
-#define Index_Load_Tag_D       0x05
-#define Index_Store_Tag_I      0x08
-#define Index_Store_Tag_D      0x09
-#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I       0x00
-#else
-#define Hit_Invalidate_I       0x10
-#endif
-#define Hit_Invalidate_D       0x11
-#define Hit_Writeback_Inv_D    0x15
-
-/*
- * R4000-specific cacheops
- */
-#define Create_Dirty_Excl_D    0x0d
-#define Fill                   0x14
-#define Hit_Writeback_I                0x18
-#define Hit_Writeback_D                0x19
-
-/*
- * R4000SC and R4400SC-specific cacheops
- */
-#define Index_Invalidate_SI     0x02
-#define Index_Writeback_Inv_SD  0x03
-#define Index_Load_Tag_SI      0x06
-#define Index_Load_Tag_SD      0x07
-#define Index_Store_Tag_SI     0x0A
-#define Index_Store_Tag_SD     0x0B
-#define Create_Dirty_Excl_SD   0x0f
-#define Hit_Invalidate_SI      0x12
-#define Hit_Invalidate_SD      0x13
-#define Hit_Writeback_Inv_SD   0x17
-#define Hit_Writeback_SD       0x1b
-#define Hit_Set_Virtual_SI     0x1e
-#define Hit_Set_Virtual_SD     0x1f
-
-/*
- * R5000-specific cacheops
- */
-#define R5K_Page_Invalidate_S  0x17
-
-/*
- * RM7000-specific cacheops
- */
-#define Page_Invalidate_T      0x16
-
-/*
- * R10000-specific cacheops
- *
- * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
- * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
- */
-#define Index_Writeback_Inv_S  0x03
-#define Index_Load_Tag_S       0x07
-#define Index_Store_Tag_S      0x0B
-#define Hit_Invalidate_S       0x13
-#define Cache_Barrier          0x14
-#define Hit_Writeback_Inv_S    0x17
-#define Index_Load_Data_I      0x18
-#define Index_Load_Data_D      0x19
-#define Index_Load_Data_S      0x1b
-#define Index_Store_Data_I     0x1c
-#define Index_Store_Data_D     0x1d
-#define Index_Store_Data_S     0x1f
-
-#endif /* __ASM_CACHEOPS_H */
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/config.h b/target/linux/brcm63xx/image/lzma-loader/src/config.h
deleted file mode 100644 (file)
index ce391f8..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-#define CONFIG_ICACHE_SIZE     (32 * 1024)
-#define CONFIG_DCACHE_SIZE     (32 * 1024)
-#define CONFIG_CACHELINE_SIZE  16
-
-#ifndef CONFIG_FLASH_OFFS
-#define CONFIG_FLASH_OFFS      0
-#endif
-
-#ifndef CONFIG_FLASH_MAX
-#define CONFIG_FLASH_MAX       0
-#endif
-
-#ifndef CONFIG_FLASH_STEP
-#define CONFIG_FLASH_STEP      0x1000
-#endif
-
-#endif /* _CONFIG_H_ */
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/cp0regdef.h b/target/linux/brcm63xx/image/lzma-loader/src/cp0regdef.h
deleted file mode 100644 (file)
index 0d824f4..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
- *
- * Copyright (C) 2001, Monta Vista Software
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#ifndef _cp0regdef_h_
-#define _cp0regdef_h_
-
-#define CP0_INDEX $0
-#define CP0_RANDOM $1
-#define CP0_ENTRYLO0 $2
-#define CP0_ENTRYLO1 $3
-#define CP0_CONTEXT $4
-#define CP0_PAGEMASK $5
-#define CP0_WIRED $6
-#define CP0_BADVADDR $8
-#define CP0_COUNT $9
-#define CP0_ENTRYHI $10
-#define CP0_COMPARE $11
-#define CP0_STATUS $12
-#define CP0_CAUSE $13
-#define CP0_EPC $14
-#define CP0_PRID $15
-#define CP0_CONFIG $16
-#define CP0_LLADDR $17
-#define CP0_WATCHLO $18
-#define CP0_WATCHHI $19
-#define CP0_XCONTEXT $20
-#define CP0_FRAMEMASK $21
-#define CP0_DIAGNOSTIC $22
-#define CP0_PERFORMANCE $25
-#define CP0_ECC $26
-#define CP0_CACHEERR $27
-#define CP0_TAGLO $28
-#define CP0_TAGHI $29
-#define CP0_ERROREPC $30
-
-#define read_32bit_c0_register(reg,sel)                                        \
-({     int __res;                                                      \
-       if (sel == 0)                                                   \
-               __asm__ __volatile__(                                   \
-                       "mfc0\t%0, " #reg "\n\t"                        \
-                       : "=r" (__res));                                \
-       else                                                            \
-               __asm__ __volatile__(                                   \
-                       ".set\tmips32\n\t"                              \
-                       "mfc0\t%0, " #reg ", " #sel "\n\t"              \
-                       ".set mips0\n\t"                                \
-                       : "=r" (__res));                                \
-       __res;                                                          \
-})
-
-#endif
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/head.S b/target/linux/brcm63xx/image/lzma-loader/src/head.S
deleted file mode 100644 (file)
index 47a7c9b..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- *     Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- *     Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include "cp0regdef.h"
-#include "cacheops.h"
-#include "config.h"
-
-#define KSEG0          0x80000000
-
-       .macro  ehb
-       sll     zero, 3
-       .endm
-
-       .text
-
-LEAF(startup)
-       .set noreorder
-       .set mips32
-
-       mtc0    zero, CP0_WATCHLO       # clear watch registers
-       mtc0    zero, CP0_WATCHHI
-       mtc0    zero, CP0_CAUSE         # clear before writing status register
-
-       mfc0    t0, CP0_STATUS
-       li      t1, 0x1000001f
-       or      t0, t1
-       xori    t0, 0x1f
-       mtc0    t0, CP0_STATUS
-       ehb
-
-       mtc0    zero, CP0_COUNT
-       mtc0    zero, CP0_COMPARE
-       ehb
-
-       la      t0, __reloc_label       # get linked address of label
-       bal     __reloc_label           # branch and link to label to
-       nop                             # get actual address
-__reloc_label:
-       subu    t0, ra, t0              # get reloc_delta
-
-       beqz    t0, __reloc_done         # if delta is 0 we are in the right place
-       nop
-
-       /* Copy our code to the right place */
-       la      t1, _code_start         # get linked address of _code_start
-       la      t2, _code_end           # get linked address of _code_end
-       addu    t0, t0, t1              # calculate actual address of _code_start
-
-__reloc_copy:
-       lw      t3, 0(t0)
-       sw      t3, 0(t1)
-       add     t1, 4
-       blt     t1, t2, __reloc_copy
-       add     t0, 4
-
-       /* flush cache */
-       la      t0, _code_start
-       la      t1, _code_end
-
-       li      t2, ~(CONFIG_CACHELINE_SIZE - 1)
-       and     t0, t2
-       and     t1, t2
-       li      t2, CONFIG_CACHELINE_SIZE
-
-       b       __flush_check
-       nop
-
-__flush_line:
-       cache   Hit_Writeback_Inv_D, 0(t0)
-       cache   Hit_Invalidate_I, 0(t0)
-       add     t0, t2
-
-__flush_check:
-       bne     t0, t1, __flush_line
-       nop
-
-       sync
-
-__reloc_done:
-
-       /* clear bss */
-       la      t0, _bss_start
-       la      t1, _bss_end
-       b       __bss_check
-       nop
-
-__bss_fill:
-       sw      zero, 0(t0)
-       addi    t0, 4
-
-__bss_check:
-       bne     t0, t1, __bss_fill
-       nop
-
-       /* Setup new "C" stack */
-       la      sp, _stack
-
-       /* reserve stack space for a0-a3 registers */
-       subu    sp, 16
-
-       /* jump to the decompressor routine */
-       la      t0, loader_main
-       jr      t0
-       nop
-
-       .set reorder
-END(startup)
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/loader.c b/target/linux/brcm63xx/image/lzma-loader/src/loader.c
deleted file mode 100644 (file)
index 0848ce6..0000000
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- *     Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- *     Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
- *     Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * The image_header structure has been taken from the U-Boot project.
- *     (C) Copyright 2008 Semihalf
- *     (C) Copyright 2000-2005
- *     Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include "config.h"
-#include "cache.h"
-#include "printf.h"
-#include "LzmaDecode.h"
-
-#define KSEG0                  0x80000000
-#define KSEG1                  0xa0000000
-
-#define KSEG1ADDR(a)           ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#undef LZMA_DEBUG
-
-#ifdef LZMA_DEBUG
-#  define DBG(f, a...) printf(f, ## a)
-#else
-#  define DBG(f, a...) do {} while (0)
-#endif
-
-/* beyond the image end, size not known in advance */
-extern unsigned char workspace[];
-
-
-extern void board_init(void);
-
-static CLzmaDecoderState lzma_state;
-static unsigned char *lzma_data;
-static unsigned long lzma_datasize;
-static unsigned long lzma_outsize;
-static unsigned long kernel_la;
-
-static void halt(void)
-{
-       printf("\nSystem halted!\n");
-       for(;;);
-}
-
-static __inline__ unsigned char lzma_get_byte(void)
-{
-       unsigned char c;
-
-       lzma_datasize--;
-       c = *lzma_data++;
-
-       return c;
-}
-
-static int lzma_init_props(void)
-{
-       unsigned char props[LZMA_PROPERTIES_SIZE];
-       int res;
-       int i;
-
-       /* read lzma properties */
-       for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
-               props[i] = lzma_get_byte();
-
-       /* read the lower half of uncompressed size in the header */
-       lzma_outsize = ((SizeT) lzma_get_byte()) +
-                      ((SizeT) lzma_get_byte() << 8) +
-                      ((SizeT) lzma_get_byte() << 16) +
-                      ((SizeT) lzma_get_byte() << 24);
-
-       /* skip rest of the header (upper half of uncompressed size) */
-       for (i = 0; i < 4; i++)
-               lzma_get_byte();
-
-       res = LzmaDecodeProperties(&lzma_state.Properties, props,
-                                       LZMA_PROPERTIES_SIZE);
-       return res;
-}
-
-static int lzma_decompress(unsigned char *outStream)
-{
-       SizeT ip, op;
-       int ret;
-
-       lzma_state.Probs = (CProb *) workspace;
-
-       ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
-                        lzma_outsize, &op);
-
-       if (ret != LZMA_RESULT_OK) {
-               int i;
-
-               DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
-                   ret, lzma_data + ip, lzma_outsize, ip, op);
-
-               for (i = 0; i < 16; i++)
-                       DBG("%02x ", lzma_data[ip + i]);
-
-               DBG("\n");
-       }
-
-       return ret;
-}
-
-static void lzma_init_data(void)
-{
-       extern unsigned char _lzma_data_start[];
-       extern unsigned char _lzma_data_end[];
-
-       kernel_la = LOADADDR;
-       lzma_data = _lzma_data_start;
-       lzma_datasize = _lzma_data_end - _lzma_data_start;
-}
-
-void loader_main(unsigned long reg_a0, unsigned long reg_a1,
-                unsigned long reg_a2, unsigned long reg_a3)
-{
-       void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
-                             unsigned long);
-       int res;
-
-       board_init();
-
-       printf("\n\nOpenWrt kernel loader for BCM63XX\n");
-       printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
-       printf("Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>\n");
-
-       lzma_init_data();
-
-       res = lzma_init_props();
-       if (res != LZMA_RESULT_OK) {
-               printf("Incorrect LZMA stream properties!\n");
-               halt();
-       }
-
-       printf("Decompressing kernel... ");
-
-       res = lzma_decompress((unsigned char *) kernel_la);
-       if (res != LZMA_RESULT_OK) {
-               printf("failed, ");
-               switch (res) {
-               case LZMA_RESULT_DATA_ERROR:
-                       printf("data error!\n");
-                       break;
-               default:
-                       printf("unknown error %d!\n", res);
-               }
-               halt();
-       } else {
-               printf("done!\n");
-       }
-
-       flush_cache(kernel_la, lzma_outsize);
-
-       printf("Starting kernel at %08x...\n\n", kernel_la);
-
-       kernel_entry = (void *) kernel_la;
-       kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/loader.lds b/target/linux/brcm63xx/image/lzma-loader/src/loader.lds
deleted file mode 100644 (file)
index 01ff852..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
-       .text : {
-               _code_start = .;
-               *(.text)
-               *(.text.*)
-               *(.rodata)
-               *(.rodata.*)
-               *(.data.lzma)
-       }
-
-       . = ALIGN(32);
-       .data : {
-               *(.data)
-               *(.data.*)
-       }
-
-       . = ALIGN(32);
-       _code_end = .;
-
-       _bss_start = .;
-       .bss : {
-               *(.bss)
-               *(.bss.*)
-       }
-
-       . = ALIGN(32);
-       _bss_end = .;
-
-       . = . + 8192;
-       _stack = .;
-
-       workspace = .;
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/loader2.lds b/target/linux/brcm63xx/image/lzma-loader/src/loader2.lds
deleted file mode 100644 (file)
index db0bb46..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
-       .text : {
-               startup = .;
-               *(.text)
-               *(.text.*)
-               *(.data)
-               *(.data.*)
-       }
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/lzma-data.lds b/target/linux/brcm63xx/image/lzma-loader/src/lzma-data.lds
deleted file mode 100644 (file)
index abf756b..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
-       .data.lzma : {
-               _lzma_data_start = .;
-               *(.data)
-               _lzma_data_end = .;
-       }
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/printf.c b/target/linux/brcm63xx/image/lzma-loader/src/printf.c
deleted file mode 100644 (file)
index 7bb5a86..0000000
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include       "printf.h"
-
-extern void board_putc(int ch);
-
-/* this is the maximum width for a variable */
-#define                LP_MAX_BUF      256
-
-/* macros */
-#define                IsDigit(x)      ( ((x) >= '0') && ((x) <= '9') )
-#define                Ctod(x)         ( (x) - '0')
-
-/* forward declaration */
-static int PrintChar(char *, char, int, int);
-static int PrintString(char *, char *, int, int);
-static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
-
-/* private variable */
-static const char theFatalMsg[] = "fatal error in lp_Print!";
-
-/* -*-
- * A low level printf() function.
- */
-static void
-lp_Print(void (*output)(void *, char *, int),
-        void * arg,
-        char *fmt,
-        va_list ap)
-{
-
-#define        OUTPUT(arg, s, l)  \
-  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
-       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
-    } else { \
-      (*output)(arg, s, l); \
-    } \
-  }
-
-    char buf[LP_MAX_BUF];
-
-    char c;
-    char *s;
-    long int num;
-
-    int longFlag;
-    int negFlag;
-    int width;
-    int prec;
-    int ladjust;
-    char padc;
-
-    int length;
-
-    for(;;) {
-       {
-           /* scan for the next '%' */
-           char *fmtStart = fmt;
-           while ( (*fmt != '\0') && (*fmt != '%')) {
-               fmt ++;
-           }
-
-           /* flush the string found so far */
-           OUTPUT(arg, fmtStart, fmt-fmtStart);
-
-           /* are we hitting the end? */
-           if (*fmt == '\0') break;
-       }
-
-       /* we found a '%' */
-       fmt ++;
-
-       /* check for long */
-       if (*fmt == 'l') {
-           longFlag = 1;
-           fmt ++;
-       } else {
-           longFlag = 0;
-       }
-
-       /* check for other prefixes */
-       width = 0;
-       prec = -1;
-       ladjust = 0;
-       padc = ' ';
-
-       if (*fmt == '-') {
-           ladjust = 1;
-           fmt ++;
-       }
-
-       if (*fmt == '0') {
-           padc = '0';
-           fmt++;
-       }
-
-       if (IsDigit(*fmt)) {
-           while (IsDigit(*fmt)) {
-               width = 10 * width + Ctod(*fmt++);
-           }
-       }
-
-       if (*fmt == '.') {
-           fmt ++;
-           if (IsDigit(*fmt)) {
-               prec = 0;
-               while (IsDigit(*fmt)) {
-                   prec = prec*10 + Ctod(*fmt++);
-               }
-           }
-       }
-
-
-       /* check format flag */
-       negFlag = 0;
-       switch (*fmt) {
-        case 'b':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'd':
-        case 'D':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           if (num < 0) {
-               num = - num;
-               negFlag = 1;
-           }
-           length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'o':
-        case 'O':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'u':
-        case 'U':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'x':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'X':
-           if (longFlag) {
-               num = va_arg(ap, long int);
-           } else {
-               num = va_arg(ap, int);
-           }
-           length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 'c':
-           c = (char)va_arg(ap, int);
-           length = PrintChar(buf, c, width, ladjust);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case 's':
-           s = (char*)va_arg(ap, char *);
-           length = PrintString(buf, s, width, ladjust);
-           OUTPUT(arg, buf, length);
-           break;
-
-        case '\0':
-           fmt --;
-           break;
-
-        default:
-           /* output this char as it is */
-           OUTPUT(arg, fmt, 1);
-       }       /* switch (*fmt) */
-
-       fmt ++;
-    }          /* for(;;) */
-
-    /* special termination call */
-    OUTPUT(arg, "\0", 1);
-}
-
-
-/* --------------- local help functions --------------------- */
-static int
-PrintChar(char * buf, char c, int length, int ladjust)
-{
-    int i;
-
-    if (length < 1) length = 1;
-    if (ladjust) {
-       *buf = c;
-       for (i=1; i< length; i++) buf[i] = ' ';
-    } else {
-       for (i=0; i< length-1; i++) buf[i] = ' ';
-       buf[length - 1] = c;
-    }
-    return length;
-}
-
-static int
-PrintString(char * buf, char* s, int length, int ladjust)
-{
-    int i;
-    int len=0;
-    char* s1 = s;
-    while (*s1++) len++;
-    if (length < len) length = len;
-
-    if (ladjust) {
-       for (i=0; i< len; i++) buf[i] = s[i];
-       for (i=len; i< length; i++) buf[i] = ' ';
-    } else {
-       for (i=0; i< length-len; i++) buf[i] = ' ';
-       for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
-    }
-    return length;
-}
-
-static int
-PrintNum(char * buf, unsigned long u, int base, int negFlag,
-        int length, int ladjust, char padc, int upcase)
-{
-    /* algorithm :
-     *  1. prints the number from left to right in reverse form.
-     *  2. fill the remaining spaces with padc if length is longer than
-     *     the actual length
-     *     TRICKY : if left adjusted, no "0" padding.
-     *             if negtive, insert  "0" padding between "0" and number.
-     *  3. if (!ladjust) we reverse the whole string including paddings
-     *  4. otherwise we only reverse the actual string representing the num.
-     */
-
-    int actualLength =0;
-    char *p = buf;
-    int i;
-
-    do {
-       int tmp = u %base;
-       if (tmp <= 9) {
-           *p++ = '0' + tmp;
-       } else if (upcase) {
-           *p++ = 'A' + tmp - 10;
-       } else {
-           *p++ = 'a' + tmp - 10;
-       }
-       u /= base;
-    } while (u != 0);
-
-    if (negFlag) {
-       *p++ = '-';
-    }
-
-    /* figure out actual length and adjust the maximum length */
-    actualLength = p - buf;
-    if (length < actualLength) length = actualLength;
-
-    /* add padding */
-    if (ladjust) {
-       padc = ' ';
-    }
-    if (negFlag && !ladjust && (padc == '0')) {
-       for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
-       buf[length -1] = '-';
-    } else {
-       for (i = actualLength; i< length; i++) buf[i] = padc;
-    }
-
-
-    /* prepare to reverse the string */
-    {
-       int begin = 0;
-       int end;
-       if (ladjust) {
-           end = actualLength - 1;
-       } else {
-           end = length -1;
-       }
-
-       while (end > begin) {
-           char tmp = buf[begin];
-           buf[begin] = buf[end];
-           buf[end] = tmp;
-           begin ++;
-           end --;
-       }
-    }
-
-    /* adjust the string pointer */
-    return length;
-}
-
-static void printf_output(void *arg, char *s, int l)
-{
-    int i;
-
-    // special termination call
-    if ((l==1) && (s[0] == '\0')) return;
-
-    for (i=0; i< l; i++) {
-       board_putc(s[i]);
-       if (s[i] == '\n') board_putc('\r');
-    }
-}
-
-void printf(char *fmt, ...)
-{
-    va_list ap;
-    va_start(ap, fmt);
-    lp_Print(printf_output, 0, fmt, ap);
-    va_end(ap);
-}
diff --git a/target/linux/brcm63xx/image/lzma-loader/src/printf.h b/target/linux/brcm63xx/image/lzma-loader/src/printf.h
deleted file mode 100644 (file)
index 9b1c1df..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _printf_h_
-#define _printf_h_
-
-#include <stdarg.h>
-void printf(char *fmt, ...);
-
-#endif /* _printf_h_ */
diff --git a/target/linux/brcm63xx/modules.mk b/target/linux/brcm63xx/modules.mk
deleted file mode 100644 (file)
index 6f6aa38..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/pcmcia-bcm63xx
-  SUBMENU:=$(PCMCIA_MENU)
-  TITLE:=Broadcom BCM63xx PCMCIA support
-  DEPENDS:=@TARGET_brcm63xx +kmod-pcmcia-rsrc
-  KCONFIG:=CONFIG_PCMCIA_BCM63XX
-  FILES:=$(LINUX_DIR)/drivers/pcmcia/bcm63xx_pcmcia.ko
-  AUTOLOAD:=$(call AutoLoad,41,bcm63xx_pcmcia)
-endef
-
-define KernelPackage/pcmcia-bcm63xx/description
-  Kernel support for PCMCIA/CardBus controller on the BCM63xx SoC
-endef
-
-$(eval $(call KernelPackage,pcmcia-bcm63xx))
-
-define KernelPackage/bcm63xx-udc
-  SUBMENU:=$(USB_MENU)
-  TITLE:=Broadcom BCM63xx UDC support
-  DEPENDS:=@TARGET_brcm63xx +kmod-usb-gadget
-  KCONFIG:=CONFIG_USB_BCM63XX_UDC
-  FILES:= \
-       $(LINUX_DIR)/drivers/usb/gadget/udc/bcm63xx_udc.ko
-  AUTOLOAD:=$(call AutoLoad,51,bcm63xx_udc)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/bcm63xx-udc/description
-  Kernel support for the USB gadget (device) controller on the BCM63xx SoC
-endef
-
-$(eval $(call KernelPackage,bcm63xx-udc))
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch
deleted file mode 100644 (file)
index b6d755d..0000000
+++ /dev/null
@@ -1,210 +0,0 @@
-From e74caf41aec5338b8cbbd0a1483650848f16f532 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:23:47 +0200
-Subject: [PATCH V2 1/8] MIPS: BCM63XX: add clkdev lookup support
-
-Enable clkdev lookup support to allow us providing clocks under
-different names to devices more easily, so we don't need to care
-about clock name clashes anymore.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/Kconfig       |   1 +
- arch/mips/bcm63xx/clk.c | 150 +++++++++++++++++++++++++++++++++++++-----------
- 2 files changed, 116 insertions(+), 35 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -279,6 +279,7 @@ config BCM63XX
-       select GPIOLIB
-       select HAVE_CLK
-       select MIPS_L1_CACHE_SHIFT_4
-+      select CLKDEV_LOOKUP
-       help
-        Support for BCM63XX based boards
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -11,6 +11,7 @@
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/clk.h>
-+#include <linux/clkdev.h>
- #include <linux/delay.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
-@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns
- }
- EXPORT_SYMBOL_GPL(clk_round_rate);
--struct clk *clk_get(struct device *dev, const char *id)
--{
--      if (!strcmp(id, "enet0"))
--              return &clk_enet0;
--      if (!strcmp(id, "enet1"))
--              return &clk_enet1;
--      if (!strcmp(id, "enetsw"))
--              return &clk_enetsw;
--      if (!strcmp(id, "ephy"))
--              return &clk_ephy;
--      if (!strcmp(id, "usbh"))
--              return &clk_usbh;
--      if (!strcmp(id, "usbd"))
--              return &clk_usbd;
--      if (!strcmp(id, "spi"))
--              return &clk_spi;
--      if (!strcmp(id, "hsspi"))
--              return &clk_hsspi;
--      if (!strcmp(id, "xtm"))
--              return &clk_xtm;
--      if (!strcmp(id, "periph"))
--              return &clk_periph;
--      if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
--              return &clk_pcm;
--      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
--              return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
--              return &clk_pcie;
--      return ERR_PTR(-ENOENT);
--}
--
--EXPORT_SYMBOL(clk_get);
--
--void clk_put(struct clk *clk)
--{
--}
--
--EXPORT_SYMBOL(clk_put);
-+static struct clk_lookup bcm3368_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+};
-+
-+static struct clk_lookup bcm6328_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
-+static struct clk_lookup bcm6338_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6345_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6348_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+};
-+
-+static struct clk_lookup bcm6358_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-+      CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-+      CLKDEV_INIT(NULL, "ephy", &clk_ephy),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+};
-+
-+static struct clk_lookup bcm6362_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
-+};
-+
-+static struct clk_lookup bcm6368_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "xtm", &clk_xtm),
-+      CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
-+};
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put);
- static int __init bcm63xx_clk_init(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+              clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
-+              break;
-+      case BCM6338_CPU_ID:
-+              clkdev_add_table(bcm6338_clks, ARRAY_SIZE(bcm6338_clks));
-+              break;
-+      case BCM6345_CPU_ID:
-+              clkdev_add_table(bcm6345_clks, ARRAY_SIZE(bcm6345_clks));
-+              break;
-+      case BCM6348_CPU_ID:
-+              clkdev_add_table(bcm6348_clks, ARRAY_SIZE(bcm6348_clks));
-+              break;
-+      case BCM6358_CPU_ID:
-+              clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
-               break;
-       case BCM6362_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+              clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
-+              break;
-+      case BCM6368_CPU_ID:
-+              clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
-               break;
-       }
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch
deleted file mode 100644 (file)
index 2be6f4c..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From d0322bf7bebe87012b4f95c85be6b5ba0cb6f344 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:31:44 +0200
-Subject: [PATCH V2 2/8] MIPS: BCM63XX: provide periph clock as refclk for uart
-
-Add a lookup as "refclk" to describe its function for the uarts.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate);
- static struct clk_lookup bcm3368_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[]
- static struct clk_lookup bcm6328_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[]
- static struct clk_lookup bcm6338_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[]
- static struct clk_lookup bcm6345_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[]
- static struct clk_lookup bcm6348_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[]
- static struct clk_lookup bcm6358_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[]
- static struct clk_lookup bcm6362_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[]
- static struct clk_lookup bcm6368_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch
deleted file mode 100644 (file)
index 986732e..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8124706e6040b1cf0d2dd3a05759df6cec4bddfb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:32:37 +0200
-Subject: [PATCH V2 3/8] tty/bcm63xx_uart: use refclk for the expected clock
- name
-
-We now have the clock available under refclk, so use that.
-
-Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/tty/serial/bcm63xx_uart.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/bcm63xx_uart.c
-+++ b/drivers/tty/serial/bcm63xx_uart.c
-@@ -847,7 +847,7 @@ static int bcm_uart_probe(struct platfor
-               return -ENODEV;
-       clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
--                                clk_get(&pdev->dev, "periph");
-+                                clk_get(&pdev->dev, "refclk");
-       if (IS_ERR(clk))
-               return -ENODEV;
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch
deleted file mode 100644 (file)
index 2f82830..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 317f8659bba01b307cbe4e9902d4e3d333fd7164 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:39:17 +0200
-Subject: [PATCH V2 4/8] tty/bcm63xx_uart: allow naming clock in device tree
-
-Codify using a named clock for the refclk of the uart. This makes it
-easier if we might need to add a gating clock (like present on the
-BCM6345).
-
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++
- drivers/tty/serial/bcm63xx_uart.c                              | 6 ++++--
- 2 files changed, 10 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
-+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
-@@ -11,6 +11,11 @@ Required properties:
- - clocks: Clock driving the hardware; used to figure out the baud rate
-   divisor.
-+
-+Optional properties:
-+
-+- clock-names: Should be "refclk".
-+
- Example:
-       uart0: serial@14e00520 {
-@@ -19,6 +24,7 @@ Example:
-               interrupt-parent = <&periph_intc>;
-               interrupts = <2>;
-               clocks = <&periph_clk>;
-+              clock-names = "refclk";
-       };
-       clocks {
---- a/drivers/tty/serial/bcm63xx_uart.c
-+++ b/drivers/tty/serial/bcm63xx_uart.c
-@@ -846,8 +846,10 @@ static int bcm_uart_probe(struct platfor
-       if (!res_irq)
-               return -ENODEV;
--      clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
--                                clk_get(&pdev->dev, "refclk");
-+      clk = clk_get(&pdev->dev, "refclk");
-+      if (IS_ERR(clk) && pdev->dev.of_node)
-+              clk = of_clk_get(pdev->dev.of_node, 0);
-+
-       if (IS_ERR(clk))
-               return -ENODEV;
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch
deleted file mode 100644 (file)
index a69998d..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From cb86630379c8f3432c916d62045b5176f17f4123 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:57:21 +0200
-Subject: [PATCH V2 6/8] MIPS: BCM63XX: move the HSSPI PLL HZ into its own
- clock
-
-Split up the HSSPL clock into rate and a gate clock, to more closely
-match the actual hardware.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -248,6 +248,10 @@ static struct clk clk_hsspi = {
-       .set    = hsspi_set,
- };
-+/*
-+ * HSSPI PLL
-+ */
-+static struct clk clk_hsspi_pll;
- /*
-  * XTM clock
-@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void)
-               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-               break;
-       case BCM6328_CPU_ID:
--              clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
-               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
-               break;
-       case BCM6338_CPU_ID:
-@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void)
-               clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
-               break;
-       case BCM6362_CPU_ID:
--              clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-               clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
-               break;
-       case BCM6368_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch
deleted file mode 100644 (file)
index eb30b2d..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-From 6d43970a2eb1c7ee88caf7328d201f9c001262e9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:48:41 +0200
-Subject: [PATCH V2 7/8] MIPS: BCM63XX: provide enet clocks as "enet" to the
- ethernet devices
-
-Add lookups to provide the appropriate enetX clocks as just "enet" to
-the ethernet devices.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
- static struct clk_lookup bcm6328_clks[] = {
-@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6345_clks[] = {
-@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6348_clks[] = {
-@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[]
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet_misc),
- };
- static struct clk_lookup bcm6358_clks[] = {
-@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-+      CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
- static struct clk_lookup bcm6362_clks[] = {
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch
deleted file mode 100644 (file)
index b5b36e5..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-From b98027285bd1fa95da0645a4234a5fc1f1a83f92 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Feb 2017 11:59:52 +0100
-Subject: [PATCH V2 8/8] MIPS: BCM63XX: split out swpkt_sar/usb clocks
-
-Make the secondary switch clocks their own clocks. This allows proper
-enable reference counting between SAR/XTM and the main switch clocks,
-and controlling them individually from drivers.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 61 +++++++++++++++++++++++++++++++++++++++++--------
- 1 file changed, 51 insertions(+), 10 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -122,21 +122,56 @@ static struct clk clk_ephy = {
- };
- /*
-+ * Ethernet switch SAR clock
-+ */
-+static void swpkt_sar_set(struct clk *clk, int enable)
-+{
-+      if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_SWPKT_SAR_EN, enable);
-+      else
-+              return;
-+}
-+
-+static struct clk clk_swpkt_sar = {
-+      .set    = swpkt_sar_set,
-+};
-+
-+/*
-+ * Ethernet switch USB clock
-+ */
-+static void swpkt_usb_set(struct clk *clk, int enable)
-+{
-+      if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_SWPKT_USB_EN, enable);
-+      else
-+              return;
-+}
-+
-+static struct clk clk_swpkt_usb = {
-+      .set    = swpkt_usb_set,
-+};
-+
-+/*
-  * Ethernet switch clock
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
--      else if (BCMCPU_IS_6368())
--              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
--                              CKCTL_6368_SWPKT_USB_EN |
--                              CKCTL_6368_SWPKT_SAR_EN,
--                              enable);
--      else
-+      } else if (BCMCPU_IS_6368()) {
-+              if (enable) {
-+                      clk_enable_unlocked(&clk_swpkt_sar);
-+                      clk_enable_unlocked(&clk_swpkt_usb);
-+              } else {
-+                      clk_disable_unlocked(&clk_swpkt_usb);
-+                      clk_disable_unlocked(&clk_swpkt_sar);
-+              }
-+              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+      } else {
-               return;
-+      }
-       if (enable) {
-               /* reset switch core afer clock change */
-@@ -261,8 +296,12 @@ static void xtm_set(struct clk *clk, int
-       if (!BCMCPU_IS_6368())
-               return;
--      bcm_hwclock_set(CKCTL_6368_SAR_EN |
--                      CKCTL_6368_SWPKT_SAR_EN, enable);
-+      if (enable)
-+              clk_enable_unlocked(&clk_swpkt_sar);
-+      else
-+              clk_disable_unlocked(&clk_swpkt_sar);
-+
-+      bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
-       if (enable) {
-               /* reset sar core afer clock change */
-@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-       CLKDEV_INIT(NULL, "spi", &clk_spi),
-       CLKDEV_INIT(NULL, "pcm", &clk_pcm),
-+      CLKDEV_INIT(NULL, "swpkt_sar", &clk_swpkt_sar),
-+      CLKDEV_INIT(NULL, "swpkt_usb", &clk_swpkt_usb),
-       CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
-       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch
deleted file mode 100644 (file)
index b339580..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 71710bb6cbc82f411a4e5faafa0c3178e48e7137 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 30 May 2017 13:31:45 +0200
-Subject: [PATCH 3/6] bcm63xx_enet: do not rely on probe order
-
-Do not rely on the shared device being probed before the enet(sw)
-devices. This makes it easier to eventually move out the shared
-device as a dma controller driver (what it should be).
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 ++-------
- 1 file changed, 2 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1723,10 +1723,8 @@ static int bcm_enet_probe(struct platfor
-       const char *clk_name;
-       int i, ret;
--      /* stop if shared driver failed, assume driver->probe will be
--       * called in the same order we register devices (correct ?) */
-       if (!bcm_enet_shared_base[0])
--              return -ENODEV;
-+              return -EPROBE_DEFER;
-       res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-       res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-@@ -2701,11 +2699,8 @@ static int bcm_enetsw_probe(struct platf
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
--      /* stop if shared driver failed, assume driver->probe will be
--       * called in the same order we register devices (correct ?)
--       */
-       if (!bcm_enet_shared_base[0])
--              return -ENODEV;
-+              return -EPROBE_DEFER;
-       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       irq_rx = platform_get_irq(pdev, 0);
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch
deleted file mode 100644 (file)
index cf0971c..0000000
+++ /dev/null
@@ -1,150 +0,0 @@
-From 179a445ae4ef36ec44f4aea18e5f42d21334d186 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 25 Feb 2017 12:39:25 +0100
-Subject: [PATCH 4/6] bcm63xx_enet: use managed functions for clock/ioremap
-
-Use managed functions where possible to reduce the amount of resource
-handling on error and remove paths.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 54 +++++++---------------------
- 1 file changed, 12 insertions(+), 42 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1768,14 +1768,14 @@ static int bcm_enet_probe(struct platfor
-               clk_name = "enet1";
-       }
--      priv->mac_clk = clk_get(&pdev->dev, clk_name);
-+      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-               goto out;
-       }
-       ret = clk_prepare_enable(priv->mac_clk);
-       if (ret)
--              goto out_put_clk_mac;
-+              goto out;
-       /* initialize default and fetch platform data */
-       priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-@@ -1803,7 +1803,7 @@ static int bcm_enet_probe(struct platfor
-       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-               /* using internal PHY, enable clock */
--              priv->phy_clk = clk_get(&pdev->dev, "ephy");
-+              priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
-               if (IS_ERR(priv->phy_clk)) {
-                       ret = PTR_ERR(priv->phy_clk);
-                       priv->phy_clk = NULL;
-@@ -1811,7 +1811,7 @@ static int bcm_enet_probe(struct platfor
-               }
-               ret = clk_prepare_enable(priv->phy_clk);
-               if (ret)
--                      goto out_put_clk_phy;
-+                      goto out_disable_clk_mac;
-       }
-       /* do minimal hardware init to be able to probe mii bus */
-@@ -1908,14 +1908,8 @@ out_uninit_hw:
-       if (priv->phy_clk)
-               clk_disable_unprepare(priv->phy_clk);
--out_put_clk_phy:
--      if (priv->phy_clk)
--              clk_put(priv->phy_clk);
--
- out_disable_clk_mac:
-       clk_disable_unprepare(priv->mac_clk);
--out_put_clk_mac:
--      clk_put(priv->mac_clk);
- out:
-       free_netdev(dev);
-       return ret;
-@@ -1951,12 +1945,10 @@ static int bcm_enet_remove(struct platfo
-       }
-       /* disable hw block clocks */
--      if (priv->phy_clk) {
-+      if (priv->phy_clk)
-               clk_disable_unprepare(priv->phy_clk);
--              clk_put(priv->phy_clk);
--      }
-+
-       clk_disable_unprepare(priv->mac_clk);
--      clk_put(priv->mac_clk);
-       free_netdev(dev);
-       return 0;
-@@ -2739,26 +2731,20 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      if (!request_mem_region(res_mem->start, resource_size(res_mem),
--                              "bcm63xx_enetsw")) {
--              ret = -EBUSY;
-+      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
-+      if (IS_ERR(priv->base)) {
-+              ret = PTR_ERR(priv->base);
-               goto out;
-       }
--      priv->base = ioremap(res_mem->start, resource_size(res_mem));
--      if (priv->base == NULL) {
--              ret = -ENOMEM;
--              goto out_release_mem;
--      }
--
--      priv->mac_clk = clk_get(&pdev->dev, "enetsw");
-+      priv->mac_clk = devm_clk_get(&pdev->dev, "enetsw");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
--              goto out_unmap;
-+              goto out;
-       }
-       ret = clk_prepare_enable(priv->mac_clk);
-       if (ret)
--              goto out_put_clk;
-+              goto out;
-       priv->rx_chan = 0;
-       priv->tx_chan = 1;
-@@ -2790,15 +2776,6 @@ static int bcm_enetsw_probe(struct platf
- out_disable_clk:
-       clk_disable_unprepare(priv->mac_clk);
--
--out_put_clk:
--      clk_put(priv->mac_clk);
--
--out_unmap:
--      iounmap(priv->base);
--
--out_release_mem:
--      release_mem_region(res_mem->start, resource_size(res_mem));
- out:
-       free_netdev(dev);
-       return ret;
-@@ -2810,20 +2787,13 @@ static int bcm_enetsw_remove(struct plat
- {
-       struct bcm_enet_priv *priv;
-       struct net_device *dev;
--      struct resource *res;
-       /* stop netdevice */
-       dev = platform_get_drvdata(pdev);
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
--      /* release device resources */
--      iounmap(priv->base);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      release_mem_region(res->start, resource_size(res));
--
-       clk_disable_unprepare(priv->mac_clk);
--      clk_put(priv->mac_clk);
-       free_netdev(dev);
-       return 0;
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch
deleted file mode 100644 (file)
index 34fdd5c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 555baec974ede81e616ca88ac6d3fca09239368f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 18 Jul 2017 13:18:01 +0200
-Subject: [PATCH 5/6] bcm63xx_enet: drop unneeded NULL phy_clk check
-
-clk_disable and clk_unprepare are NULL-safe, so need to duplicate the
-NULL check of the functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1905,8 +1905,7 @@ out_free_mdio:
- out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
--      if (priv->phy_clk)
--              clk_disable_unprepare(priv->phy_clk);
-+      clk_disable_unprepare(priv->phy_clk);
- out_disable_clk_mac:
-       clk_disable_unprepare(priv->mac_clk);
-@@ -1945,9 +1944,7 @@ static int bcm_enet_remove(struct platfo
-       }
-       /* disable hw block clocks */
--      if (priv->phy_clk)
--              clk_disable_unprepare(priv->phy_clk);
--
-+      clk_disable_unprepare(priv->phy_clk);
-       clk_disable_unprepare(priv->mac_clk);
-       free_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch
deleted file mode 100644 (file)
index 41a6b57..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-From 77364ce98037972fb1c57d0ee0418eb1c2b26521 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 29 May 2017 13:11:14 +0200
-Subject: [PATCH 6/6] bcm63xx_enet: remove unneeded include
-
-We don't use anyhing from that file, so drop it.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -9,7 +9,6 @@
- #include <linux/platform_device.h>
- #include <bcm63xx_regs.h>
--#include <bcm63xx_irq.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_iudma.h>
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch b/target/linux/brcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch
deleted file mode 100644 (file)
index c489001..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 943b0832e0cf3afe5bd40ffb1885d06106122c5d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 16 Jul 2017 12:49:49 +0200
-Subject: [PATCH 1/4] bcm63xx_enet: just use "enet" as the clock name
-
-Now that we have the individual clocks available as "enet" we
-don't need to rely on the device id for them anymore.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1720,7 +1720,6 @@ static int bcm_enet_probe(struct platfor
-       struct bcm63xx_enet_platform_data *pd;
-       struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
-       struct mii_bus *bus;
--      const char *clk_name;
-       int i, ret;
-       if (!bcm_enet_shared_base[0])
-@@ -1761,14 +1760,12 @@ static int bcm_enet_probe(struct platfor
-       if (priv->mac_id == 0) {
-               priv->rx_chan = 0;
-               priv->tx_chan = 1;
--              clk_name = "enet0";
-       } else {
-               priv->rx_chan = 2;
-               priv->tx_chan = 3;
--              clk_name = "enet1";
-       }
--      priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
-+      priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-               goto out;
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch b/target/linux/brcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch
deleted file mode 100644 (file)
index f3ddd74..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-From b7d1d1f345bb3b25c360c1df812d98866e2ee7fb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 30 Sep 2017 13:50:03 +0200
-Subject: [PATCH 2/4] bcm63xx_enet: use platform data for dma channel numbers
-
-To reduce the reliance on device ids, pass the dma channel numbers to
-the enet devices as platform data.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-enet.c                          |  8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h |  4 ++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c          | 11 ++---------
- 3 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int uni
-               dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
-       }
-+      if (unit == 0) {
-+              dpd->rx_chan = 0;
-+              dpd->tx_chan = 1;
-+      } else {
-+              dpd->rx_chan = 2;
-+              dpd->tx_chan = 3;
-+      }
-+
-       ret = platform_device_register(pdev);
-       if (ret)
-               return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data {
-       /* DMA descriptor shift */
-       unsigned int dma_desc_shift;
-+
-+      /* dma channel ids */
-+      int rx_chan;
-+      int tx_chan;
- };
- /*
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1756,15 +1756,6 @@ static int bcm_enet_probe(struct platfor
-       priv->irq_tx = res_irq_tx->start;
-       priv->mac_id = pdev->id;
--      /* get rx & tx dma channel id for this mac */
--      if (priv->mac_id == 0) {
--              priv->rx_chan = 0;
--              priv->tx_chan = 1;
--      } else {
--              priv->rx_chan = 2;
--              priv->tx_chan = 3;
--      }
--
-       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
-@@ -1796,6 +1787,8 @@ static int bcm_enet_probe(struct platfor
-               priv->dma_chan_width = pd->dma_chan_width;
-               priv->dma_has_sram = pd->dma_has_sram;
-               priv->dma_desc_shift = pd->dma_desc_shift;
-+              priv->rx_chan = pd->rx_chan;
-+              priv->tx_chan = pd->tx_chan;
-       }
-       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch b/target/linux/brcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch
deleted file mode 100644 (file)
index a656e4f..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-From 8c61608e5dd2e15575c171ee9cd558ddc3b94962 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 17 Dec 2017 12:54:30 +0100
-Subject: [PATCH 3/4] bcm63xx_enet: remove pointless mac_id check
-
-Enabling the ephy clock for mac 1 is harmless, and the actual usage of
-the ephy is not restricted to mac 0, so we might as well remove the
-check.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1791,7 +1791,7 @@ static int bcm_enet_probe(struct platfor
-               priv->tx_chan = pd->tx_chan;
-       }
--      if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-+      if (priv->has_phy && !priv->use_external_mii) {
-               /* using internal PHY, enable clock */
-               priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
-               if (IS_ERR(priv->phy_clk)) {
diff --git a/target/linux/brcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch b/target/linux/brcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch
deleted file mode 100644 (file)
index cab9e5a..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From faea89cd893a1a7af81185f026a64dad603ef72f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 17 Dec 2017 12:58:12 +0100
-Subject: [PATCH 4/4] bcm63xx_enet: use platform device id directly for miibus
- name
-
-Directly use the platform device for generating the miibus name. This removes
-the last user of bcm_enet_priv::mac_id and we can remove the field.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 +--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 3 ---
- 2 files changed, 1 insertion(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1754,7 +1754,6 @@ static int bcm_enet_probe(struct platfor
-       dev->irq = priv->irq = res_irq->start;
-       priv->irq_rx = res_irq_rx->start;
-       priv->irq_tx = res_irq_tx->start;
--      priv->mac_id = pdev->id;
-       priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-       if (IS_ERR(priv->mac_clk)) {
-@@ -1822,7 +1821,7 @@ static int bcm_enet_probe(struct platfor
-               bus->priv = priv;
-               bus->read = bcm_enet_mdio_read_phylib;
-               bus->write = bcm_enet_mdio_write_phylib;
--              sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id);
-+              sprintf(bus->id, "%s-%d", pdev->name, pdev->id);
-               /* only probe bus where we think the PHY is, because
-                * the mdio read operation return 0 instead of 0xffff
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -193,9 +193,6 @@ struct bcm_enet_mib_counters {
- struct bcm_enet_priv {
--      /* mac id (from platform device id) */
--      int mac_id;
--
-       /* base remapped address of device */
-       void __iomem *base;
diff --git a/target/linux/brcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 3974b9b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index a9651d0..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -410,7 +410,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index 7ccb64c..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o
-+                 dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -39,6 +39,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -887,22 +888,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -916,14 +902,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/brcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 64ea473..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 8a532fe..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o usb-common.o
-+                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 6fc5551..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -881,6 +882,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
diff --git a/target/linux/brcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index f7311a8..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -13,11 +13,18 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index 7d0a35c..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 3db82bb..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -882,6 +883,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/brcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch
deleted file mode 100644 (file)
index 6a714eb..0000000
+++ /dev/null
@@ -1,481 +0,0 @@
-From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:29:43 +0200
-Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser
-
-Move the bcm963xx Image Tag parsing into its own partition parser. This
-Allows reusing the parser with different full flash parsers.
-
-While moving it, rename it to bcm963* to better reflect it isn't chip
-but board specific.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I tried to keep the code as-is, to keep the changes as small as
-possible.
-
-One side effect is that the partitions get renumbered, which means any
-root=/dev/mtdblock* will now point to the wrong mtd device. But since
-bcm963xx boards will require these hardcoded in the kernel commandline
-anyway this should b a non issue, as it can be easily updated.
-
-There is no such thing in the mips/bcm63xx defconfig, so nothing to update
-there.
-
- drivers/mtd/Kconfig                   |   1 +
- drivers/mtd/bcm63xxpart.c             | 155 ++----------------------
- drivers/mtd/parsers/Kconfig           |  11 ++
- drivers/mtd/parsers/Makefile          |   1 +
- drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++
- 5 files changed, 235 insertions(+), 147 deletions(-)
- create mode 100644 drivers/mtd/parsers/parser_imagetag.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -163,6 +163,7 @@ config MTD_BCM63XX_PARTS
-       tristate "BCM63XX CFE partitioning support"
-       depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-       select CRC32
-+      select MTD_PARSER_IMAGETAG
-       help
-         This provides partions parsing for BCM63xx devices with CFE
-         bootloaders.
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd
-       return 0;
- }
--static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
--      loff_t tag_offset, struct bcm_tag *buf)
--{
--      int ret;
--      size_t retlen;
--      u32 computed_crc;
--
--      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
--      if (ret)
--              return ret;
--
--      if (retlen != sizeof(*buf))
--              return -EIO;
--
--      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
--                              offsetof(struct bcm_tag, header_crc));
--      if (computed_crc == buf->header_crc) {
--              STR_NULL_TERMINATE(buf->board_id);
--              STR_NULL_TERMINATE(buf->tag_version);
--
--              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
--                      name, tag_offset, buf->tag_version, buf->board_id);
--
--              return 0;
--      }
--
--      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
--              name, tag_offset, buf->header_crc, computed_crc);
--      return 1;
--}
-+static const char * const bcm63xx_cfe_part_types[] = {
-+      "bcm963xx-imagetag",
-+      NULL,
-+};
- static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
-       const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
- {
--      /* CFE, NVRAM and global Linux are always present */
--      int nrparts = 3, curpart = 0;
--      struct bcm_tag *buf = NULL;
-       struct mtd_partition *parts;
--      int ret;
--      unsigned int rootfsaddr, kerneladdr, spareaddr;
--      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int nrparts = 3, curpart = 0;
-       unsigned int cfelen, nvramlen;
-       unsigned int cfe_erasesize;
-       int i;
--      bool rootfs_first = false;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
-                             BCM963XX_CFE_BLOCK_SIZE);
-@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti
-       nvramlen = nvram->psi_size * SZ_1K;
-       nvramlen = roundup(nvramlen, cfe_erasesize);
--      buf = vmalloc(sizeof(struct bcm_tag));
--      if (!buf)
--              return -ENOMEM;
--
--      /* Get the tag */
--      ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
--      if (!ret) {
--              STR_NULL_TERMINATE(buf->flash_image_start);
--              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
--                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid rootfs address: %*ph\n",
--                              (int)sizeof(buf->flash_image_start),
--                              buf->flash_image_start);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_address);
--              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
--                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid kernel address: %*ph\n",
--                              (int)sizeof(buf->kernel_address),
--                              buf->kernel_address);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_length);
--              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
--                      pr_err("invalid kernel length: %*ph\n",
--                              (int)sizeof(buf->kernel_length),
--                              buf->kernel_length);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->total_length);
--              if (kstrtouint(buf->total_length, 10, &totallen)) {
--                      pr_err("invalid total length: %*ph\n",
--                              (int)sizeof(buf->total_length),
--                              buf->total_length);
--                      goto invalid_tag;
--              }
--
--              kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
--              rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
--              spareaddr = roundup(totallen, master->erasesize) + cfelen;
--
--              if (rootfsaddr < kerneladdr) {
--                      /* default Broadcom layout */
--                      rootfslen = kerneladdr - rootfsaddr;
--                      rootfs_first = true;
--              } else {
--                      /* OpenWrt layout */
--                      rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
--              }
--      } else if (ret > 0) {
--invalid_tag:
--              kernellen = 0;
--              rootfslen = 0;
--              rootfsaddr = 0;
--              spareaddr = cfelen;
--      } else {
--              goto out;
--      }
--      sparelen = master->size - spareaddr - nvramlen;
--
--      /* Determine number of partitions */
--      if (rootfslen > 0)
--              nrparts++;
--
--      if (kernellen > 0)
--              nrparts++;
--
-       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
--      if (!parts) {
--              ret = -ENOMEM;
--              goto out;
--      }
-+      if (!parts)
-+              return -ENOMEM;
-       /* Start building partition list */
-       parts[curpart].name = "CFE";
-@@ -230,30 +124,6 @@ invalid_tag:
-       parts[curpart].size = cfelen;
-       curpart++;
--      if (kernellen > 0) {
--              int kernelpart = curpart;
--
--              if (rootfslen > 0 && rootfs_first)
--                      kernelpart++;
--              parts[kernelpart].name = "kernel";
--              parts[kernelpart].offset = kerneladdr;
--              parts[kernelpart].size = kernellen;
--              curpart++;
--      }
--
--      if (rootfslen > 0) {
--              int rootfspart = curpart;
--
--              if (kernellen > 0 && rootfs_first)
--                      rootfspart--;
--              parts[rootfspart].name = "rootfs";
--              parts[rootfspart].offset = rootfsaddr;
--              parts[rootfspart].size = rootfslen;
--              if (sparelen > 0  && !rootfs_first)
--                      parts[rootfspart].size += sparelen;
--              curpart++;
--      }
--
-       parts[curpart].name = "nvram";
-       parts[curpart].offset = master->size - nvramlen;
-       parts[curpart].size = nvramlen;
-@@ -263,22 +133,13 @@ invalid_tag:
-       parts[curpart].name = "linux";
-       parts[curpart].offset = cfelen;
-       parts[curpart].size = master->size - cfelen - nvramlen;
-+      parts[curpart].types = bcm63xx_cfe_part_types;
-       for (i = 0; i < nrparts; i++)
-               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-                       parts[i].name, parts[i].offset, parts[i].size);
--      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
--              sparelen);
--
-       *pparts = parts;
--      ret = 0;
--
--out:
--      vfree(buf);
--
--      if (ret)
--              return ret;
-       return nrparts;
- }
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,14 @@
-+config MTD_PARSER_IMAGETAG
-+      tristate "Parser for BCM963XX Image Tag format partitions"
-+      depends on BCM63XX || BMIPS || COMPILE_TEST
-+      select CRC32
-+      help
-+        Image Tag is the firmware header used by broadcom on their xDSL line
-+        of devices. It is used to describe the offsets and lengths of kernel
-+        and rootfs partitions.
-+        This driver adds support for parsing a partition with an Image Tag
-+        header and creates up to two partitions, kernel and rootfs.
-+
- config MTD_PARSER_TRX
-       tristate "Parser for TRX format partitions"
-       depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1 +1,2 @@
-+obj-$(CONFIG_MTD_PARSER_IMAGETAG)     += parser_imagetag.o
- obj-$(CONFIG_MTD_PARSER_TRX)          += parser_trx.o
---- /dev/null
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -0,0 +1,214 @@
-+/*
-+ * BCM63XX CFE image tag parser
-+ *
-+ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
-+ *                      Mike Albon <malbon@openwrt.org>
-+ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
-+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/bcm963xx_tag.h>
-+#include <linux/crc32.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sizes.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+/* Ensure strings read from flash structs are null terminated */
-+#define STR_NULL_TERMINATE(x) \
-+      do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
-+
-+static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
-+      loff_t tag_offset, struct bcm_tag *buf)
-+{
-+      int ret;
-+      size_t retlen;
-+      u32 computed_crc;
-+
-+      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
-+      if (ret)
-+              return ret;
-+
-+      if (retlen != sizeof(*buf))
-+              return -EIO;
-+
-+      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
-+                              offsetof(struct bcm_tag, header_crc));
-+      if (computed_crc == buf->header_crc) {
-+              STR_NULL_TERMINATE(buf->board_id);
-+              STR_NULL_TERMINATE(buf->tag_version);
-+
-+              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
-+                      name, tag_offset, buf->tag_version, buf->board_id);
-+
-+              return 0;
-+      }
-+
-+      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
-+              name, tag_offset, buf->header_crc, computed_crc);
-+      return -EINVAL;
-+}
-+
-+static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
-+                                      const struct mtd_partition **pparts,
-+                                      struct mtd_part_parser_data *data)
-+{
-+      /* CFE, NVRAM and global Linux are always present */
-+      int nrparts = 0, curpart = 0;
-+      struct bcm_tag *buf = NULL;
-+      struct mtd_partition *parts;
-+      int ret;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
-+      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int i;
-+      bool rootfs_first = false;
-+
-+      buf = vmalloc(sizeof(struct bcm_tag));
-+      if (!buf)
-+              return -ENOMEM;
-+
-+      /* Get the tag */
-+      ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
-+      if (!ret) {
-+              STR_NULL_TERMINATE(buf->flash_image_start);
-+              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
-+                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid rootfs address: %*ph\n",
-+                              (int)sizeof(buf->flash_image_start),
-+                              buf->flash_image_start);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_address);
-+              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
-+                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid kernel address: %*ph\n",
-+                              (int)sizeof(buf->kernel_address),
-+                              buf->kernel_address);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_length);
-+              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
-+                      pr_err("invalid kernel length: %*ph\n",
-+                              (int)sizeof(buf->kernel_length),
-+                              buf->kernel_length);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->total_length);
-+              if (kstrtouint(buf->total_length, 10, &totallen)) {
-+                      pr_err("invalid total length: %*ph\n",
-+                              (int)sizeof(buf->total_length),
-+                              buf->total_length);
-+                      goto out;
-+              }
-+
-+              /*
-+               * Addresses are flash absolute, so convert to partition
-+               * relative addresses. Assume either kernel or rootfs will
-+               * directly follow the image tag.
-+               */
-+              if (rootfsaddr < kerneladdr)
-+                      offset = rootfsaddr - sizeof(struct bcm_tag);
-+              else
-+                      offset = kerneladdr - sizeof(struct bcm_tag);
-+
-+              kerneladdr = kerneladdr - offset;
-+              rootfsaddr = rootfsaddr - offset;
-+              spareaddr = roundup(totallen, master->erasesize);
-+
-+              if (rootfsaddr < kerneladdr) {
-+                      /* default Broadcom layout */
-+                      rootfslen = kerneladdr - rootfsaddr;
-+                      rootfs_first = true;
-+              } else {
-+                      /* OpenWrt layout */
-+                      rootfsaddr = kerneladdr + kernellen;
-+                      rootfslen = spareaddr - rootfsaddr;
-+              }
-+      } else {
-+              goto out;
-+      }
-+      sparelen = master->size - spareaddr;
-+
-+      /* Determine number of partitions */
-+      if (rootfslen > 0)
-+              nrparts++;
-+
-+      if (kernellen > 0)
-+              nrparts++;
-+
-+      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-+      if (!parts) {
-+              ret = -ENOMEM;
-+              goto out;
-+      }
-+
-+      /* Start building partition list */
-+      if (kernellen > 0) {
-+              int kernelpart = curpart;
-+
-+              if (rootfslen > 0 && rootfs_first)
-+                      kernelpart++;
-+              parts[kernelpart].name = "kernel";
-+              parts[kernelpart].offset = kerneladdr;
-+              parts[kernelpart].size = kernellen;
-+              curpart++;
-+      }
-+
-+      if (rootfslen > 0) {
-+              int rootfspart = curpart;
-+
-+              if (kernellen > 0 && rootfs_first)
-+                      rootfspart--;
-+              parts[rootfspart].name = "rootfs";
-+              parts[rootfspart].offset = rootfsaddr;
-+              parts[rootfspart].size = rootfslen;
-+              if (sparelen > 0  && !rootfs_first)
-+                      parts[rootfspart].size += sparelen;
-+              curpart++;
-+      }
-+
-+      for (i = 0; i < nrparts; i++)
-+              pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-+                      parts[i].name, parts[i].offset, parts[i].size);
-+
-+      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
-+              sparelen);
-+
-+      *pparts = parts;
-+      ret = 0;
-+
-+out:
-+      vfree(buf);
-+
-+      if (ret)
-+              return ret;
-+
-+      return nrparts;
-+}
-+
-+static struct mtd_part_parser bcm963xx_imagetag_parser = {
-+      .parse_fn = bcm963xx_parse_imagetag_partitions,
-+      .name = "bcm963xx-imagetag",
-+};
-+module_mtd_part_parser(bcm963xx_imagetag_parser);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
-+MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/target/linux/brcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch b/target/linux/brcm63xx/patches-4.14/122-mtd-bcm63xxpart-add-of_match_table.patch
deleted file mode 100644 (file)
index 9b3f2c4..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 89cd5efa4a0d342b860a726bb1d382e4db4b96a4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:34:42 +0200
-Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -34,6 +34,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -172,9 +173,16 @@ out:
-       return ret;
- };
-+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
-+
- static struct mtd_part_parser bcm63xx_cfe_parser = {
-       .parse_fn = bcm63xx_parse_cfe_partitions,
-       .name = "bcm63xxpart",
-+      .of_match_table = parse_bcm63xx_cfe_match_table,
- };
- module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/target/linux/brcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/brcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch
deleted file mode 100644 (file)
index 04978b3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:37:12 +0200
-Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -24,6 +24,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- /* Ensure strings read from flash structs are null terminated */
- #define STR_NULL_TERMINATE(x) \
-@@ -200,9 +201,16 @@ out:
-       return nrparts;
- }
-+static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-imagetag" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
-+
- static struct mtd_part_parser bcm963xx_imagetag_parser = {
-       .parse_fn = bcm963xx_parse_imagetag_partitions,
-       .name = "bcm963xx-imagetag",
-+      .of_match_table = parse_bcm963xx_imagetag_match_table,
- };
- module_mtd_part_parser(bcm963xx_imagetag_parser);
diff --git a/target/linux/brcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/brcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch
deleted file mode 100644 (file)
index 53e8932..0000000
+++ /dev/null
@@ -1,226 +0,0 @@
-From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:07:42 +0200
-Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
-
-Setup directory and add a helper for bcm63xx pinctrl support.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/Kconfig                   |   1 +
- drivers/pinctrl/Makefile                  |   1 +
- drivers/pinctrl/bcm63xx/Kconfig           |   3 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
- 7 files changed, 163 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
- create mode 100644 drivers/pinctrl/bcm63xx/Makefile
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -351,6 +351,7 @@ config PINCTRL_RK805
- source "drivers/pinctrl/aspeed/Kconfig"
- source "drivers/pinctrl/bcm/Kconfig"
-+source "drivers/pinctrl/bcm63xx/Kconfig"
- source "drivers/pinctrl/berlin/Kconfig"
- source "drivers/pinctrl/freescale/Kconfig"
- source "drivers/pinctrl/intel/Kconfig"
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_RK805)  += pinctrl-r
- obj-$(CONFIG_ARCH_ASPEED)     += aspeed/
- obj-y                         += bcm/
-+obj-y                         += bcm63xx/
- obj-$(CONFIG_PINCTRL_BERLIN)  += berlin/
- obj-y                         += freescale/
- obj-$(CONFIG_X86)             += intel/
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -0,0 +1,3 @@
-+config PINCTRL_BCM63XX
-+      bool
-+      select GPIO_GENERIC
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/device.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of_irq.h>
-+
-+#include "pinctrl-bcm63xx.h"
-+#include "../core.h"
-+
-+#define BANK_SIZE     sizeof(u32)
-+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
-+
-+#ifdef CONFIG_OF
-+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
-+                               const struct of_phandle_args *gpiospec,
-+                               u32 *flags)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(gc);
-+      int pin = gpiospec->args[0];
-+
-+      if (gc != &base[pin / PINS_PER_BANK])
-+              return -EINVAL;
-+
-+      pin = pin % PINS_PER_BANK;
-+
-+      if (pin >= gc->ngpio)
-+              return -EINVAL;
-+
-+      if (flags)
-+              *flags = gpiospec->args[1];
-+
-+      return pin;
-+}
-+#endif
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(chip);
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      /* FIXME: this is ugly */
-+      sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
-+                            void __iomem *dirout, void __iomem *data,
-+                            size_t sz, int ngpio)
-+
-+{
-+      int banks, chips, i, ret = -EINVAL;
-+
-+      chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+      banks = sz / BANK_SIZE;
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+              int reg_offset;
-+              char *label;
-+
-+              label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
-+              if (!label)
-+                      return -ENOMEM;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              /* the registers are treated like a huge big endian register */
-+              reg_offset = (banks - i - 1) * BANK_SIZE;
-+
-+              ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
-+                               NULL, NULL, dirout + reg_offset, NULL,
-+                               BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+              if (ret)
-+                      return ret;
-+
-+              gc[i].request = gpiochip_generic_request;
-+              gc[i].free = gpiochip_generic_free;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc[i].to_irq = bcm63xx_gpio_to_irq;
-+
-+#ifdef CONFIG_OF
-+              gc[i].of_gpio_n_cells = 2;
-+              gc[i].of_xlate = bcm63xx_gpio_of_xlate;
-+#endif
-+
-+              gc[i].label = label;
-+              gc[i].ngpio = pins;
-+
-+              devm_gpiochip_add_data(dev, &gc[i], gc);
-+      }
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
-+                                  int ngpio)
-+{
-+      int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
-+      }
-+}
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio)
-+{
-+      struct pinctrl_dev *pctldev;
-+      struct resource *res;
-+      void __iomem *dirout, *data;
-+      size_t sz;
-+      int ret;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
-+      dirout = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(dirout))
-+              return ERR_CAST(dirout);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
-+      data = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(data))
-+              return ERR_CAST(data);
-+
-+      sz = resource_size(res);
-+
-+      ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
-+      if (ret)
-+              return ERR_PTR(ret);
-+
-+      pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
-+      if (IS_ERR(pctldev))
-+              return pctldev;
-+
-+      bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
-+
-+      dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
-+
-+      return pctldev;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-@@ -0,0 +1,14 @@
-+#ifndef __PINCTRL_BCM63XX
-+#define __PINCTRL_BCM63XX
-+
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/platform_device.h>
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio);
-+
-+#endif
diff --git a/target/linux/brcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 3a2a781..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:33:56 +0200
-Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6328 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-@@ -0,0 +1,61 @@
-+* Broadcom BCM6328 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6328-pinctrl".
-+- reg: Register specifies of dirout, dat, mode, mux registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6328-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0xc>;
-+      reg-names = "dirout", "dat", "mode", "mux";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led
-+gpio1         1       led
-+gpio2         2       led
-+gpio3         3       led
-+gpio4         4       led
-+gpio5         5       led
-+gpio6         6       led, serial_led_data
-+gpio7         7       led, serial_led_clk
-+gpio8         8       led
-+gpio9         9       led
-+gpio10                10      led
-+gpio11                11      led
-+gpio12                12      led
-+gpio13                13      led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led, pcie_clkreq
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      ephy0_act_led
-+gpio26                26      ephy1_act_led
-+gpio27                27      ephy2_act_led
-+gpio28                28      ephy3_act_led
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+hsspi_cs1     -       hsspi_cs1
-+usb_port1     -       usb_host_port, usb_device_port
diff --git a/target/linux/brcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/brcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
deleted file mode 100644 (file)
index 3c5f15b..0000000
+++ /dev/null
@@ -1,495 +0,0 @@
-From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:12:50 +0200
-Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
-
-Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
-GPIOs, as LEDs for the integrated LED controller, or various other
-functions. Its pincontrol mux registers also control other aspects, like
-switching the second USB port between host and device mode.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
- 3 files changed, 464 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -1,3 +1,10 @@
- config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+
-+config PINCTRL_BCM6328
-+      bool "BCM6328 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-@@ -0,0 +1,456 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6328_MUX_LO_REG    0x4
-+#define BCM6328_MUX_HI_REG    0x0
-+#define BCM6328_MUX_OTHER_REG 0x8
-+
-+#define BCM6328_NGPIO         32
-+
-+struct bcm6328_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6328_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6328_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio;
-+};
-+
-+static const struct pinctrl_pin_desc bcm6328_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+
-+      /*
-+       * No idea where they really are; so let's put them according
-+       * to their mux offsets.
-+       */
-+      PINCTRL_PIN(36, "hsspi_cs1"),
-+      PINCTRL_PIN(38, "usb_p2"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+
-+static unsigned hsspi_cs1_pins[] = { 36 };
-+static unsigned usb_port1_pins[] = { 38 };
-+
-+#define BCM6328_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6328_pingroup bcm6328_groups[] = {
-+      BCM6328_GROUP(gpio0),
-+      BCM6328_GROUP(gpio1),
-+      BCM6328_GROUP(gpio2),
-+      BCM6328_GROUP(gpio3),
-+      BCM6328_GROUP(gpio4),
-+      BCM6328_GROUP(gpio5),
-+      BCM6328_GROUP(gpio6),
-+      BCM6328_GROUP(gpio7),
-+      BCM6328_GROUP(gpio8),
-+      BCM6328_GROUP(gpio9),
-+      BCM6328_GROUP(gpio10),
-+      BCM6328_GROUP(gpio11),
-+      BCM6328_GROUP(gpio12),
-+      BCM6328_GROUP(gpio13),
-+      BCM6328_GROUP(gpio14),
-+      BCM6328_GROUP(gpio15),
-+      BCM6328_GROUP(gpio16),
-+      BCM6328_GROUP(gpio17),
-+      BCM6328_GROUP(gpio18),
-+      BCM6328_GROUP(gpio19),
-+      BCM6328_GROUP(gpio20),
-+      BCM6328_GROUP(gpio21),
-+      BCM6328_GROUP(gpio22),
-+      BCM6328_GROUP(gpio23),
-+      BCM6328_GROUP(gpio24),
-+      BCM6328_GROUP(gpio25),
-+      BCM6328_GROUP(gpio26),
-+      BCM6328_GROUP(gpio27),
-+      BCM6328_GROUP(gpio28),
-+      BCM6328_GROUP(gpio29),
-+      BCM6328_GROUP(gpio30),
-+      BCM6328_GROUP(gpio31),
-+
-+      BCM6328_GROUP(hsspi_cs1),
-+      BCM6328_GROUP(usb_port1),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const pcie_clkreq_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const hsspi_cs1_groups[] = {
-+      "hsspi_cs1"
-+};
-+
-+static const char * const usb_host_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+static const char * const usb_device_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+#define BCM6328_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6328_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6328_function bcm6328_funcs[] = {
-+      BCM6328_MODE_FUN(led),
-+      BCM6328_MUX_FUN(serial_led_data, 2),
-+      BCM6328_MUX_FUN(serial_led_clk, 2),
-+      BCM6328_MUX_FUN(inet_act_led, 1),
-+      BCM6328_MUX_FUN(pcie_clkreq, 2),
-+      BCM6328_MUX_FUN(ephy0_act_led, 1),
-+      BCM6328_MUX_FUN(ephy1_act_led, 1),
-+      BCM6328_MUX_FUN(ephy2_act_led, 1),
-+      BCM6328_MUX_FUN(ephy3_act_led, 1),
-+      BCM6328_MUX_FUN(hsspi_cs1, 2),
-+      BCM6328_MUX_FUN(usb_host_port, 1),
-+      BCM6328_MUX_FUN(usb_device_port, 2),
-+};
-+
-+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_groups);
-+}
-+
-+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6328_groups[group].name;
-+}
-+
-+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6328_groups[group].pins;
-+      *num_pins = bcm6328_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_funcs);
-+}
-+
-+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6328_funcs[selector].name;
-+}
-+
-+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6328_funcs[selector].groups;
-+      *num_groups = bcm6328_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      reg = __raw_readl(pctl->mux[pin / 16]);
-+      reg &= ~(3UL << ((pin % 16) * 2));
-+      reg |= mux << ((pin % 16) * 2);
-+      __raw_writel(reg, pctl->mux[pin / 16]);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
-+      const struct bcm6328_function *f = &bcm6328_funcs[selector];
-+
-+      bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6328_rmw_mux(pctl, offset, 0, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6328_pctl_ops = {
-+      .get_groups_count       = bcm6328_pinctrl_get_group_count,
-+      .get_group_name         = bcm6328_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6328_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6328_pmx_ops = {
-+      .get_functions_count    = bcm6328_pinctrl_get_func_count,
-+      .get_function_name      = bcm6328_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6328_pinctrl_get_groups,
-+      .set_mux                = bcm6328_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6328_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6328_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+      pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
-+      pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
-+      pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6328_pctl_ops;
-+      pctl->desc.pmxops = &bcm6328_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
-+      pctl->desc.pins = bcm6328_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               &pctl->gpio, BCM6328_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6328_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6328-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6328_pinctrl_driver = {
-+      .probe = bcm6328_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6328-pinctrl",
-+              .of_match_table = bcm6328_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 6bac903..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
-From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:35:45 +0200
-Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6348 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-@@ -0,0 +1,32 @@
-+* Broadcom BCM6348 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6348-pinctrl".
-+- reg: register Specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6348-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat", "mode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+group0                32-36   ext_mii, utopia, diag
-+group1                22-31   ext_ephy, mii_snoop, mii_pccard,
-+                      spi_master_uart, utopia, diag
-+group2                16-21   pci, diag
-+group3                8-15    ext_mii, utopia
-+group4                0-7     ext_ephy, mii_snoop, legacy_led, diag
diff --git a/target/linux/brcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/brcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
deleted file mode 100644 (file)
index b48723c..0000000
+++ /dev/null
@@ -1,431 +0,0 @@
-From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:14:13 +0200
-Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
-
-Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
-up to ten gpios into fourteen potential functions. It does not allow
-muxing individual pins. Some functions require more than one group to be
-muxed to the same function.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
- 3 files changed, 399 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6348
-+      bool "BCM6348 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
-+obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-@@ -0,0 +1,391 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6348_NGPIO         37
-+
-+#define MAX_GROUP             4
-+#define PINS_PER_GROUP                8
-+#define PIN_TO_GROUP(pin)     (MAX_GROUP - ((pin) / PINS_PER_GROUP))
-+#define GROUP_SHIFT(pin)      (PIN_TO_GROUP(pin) * 4)
-+#define GROUP_MASK(pin)               (0xf << GROUP_SHIFT(pin))
-+
-+struct bcm6348_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6348_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+      unsigned int value;
-+};
-+
-+struct bcm6348_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6348_PIN(a, b, group)              \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(group),    \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6348_pins[] = {
-+      BCM6348_PIN(0, "gpio0", 4),
-+      BCM6348_PIN(1, "gpio1", 4),
-+      BCM6348_PIN(2, "gpio2", 4),
-+      BCM6348_PIN(3, "gpio3", 4),
-+      BCM6348_PIN(4, "gpio4", 4),
-+      BCM6348_PIN(5, "gpio5", 4),
-+      BCM6348_PIN(6, "gpio6", 4),
-+      BCM6348_PIN(7, "gpio7", 4),
-+      BCM6348_PIN(8, "gpio8", 3),
-+      BCM6348_PIN(9, "gpio9", 3),
-+      BCM6348_PIN(10, "gpio10", 3),
-+      BCM6348_PIN(11, "gpio11", 3),
-+      BCM6348_PIN(12, "gpio12", 3),
-+      BCM6348_PIN(13, "gpio13", 3),
-+      BCM6348_PIN(14, "gpio14", 3),
-+      BCM6348_PIN(15, "gpio15", 3),
-+      BCM6348_PIN(16, "gpio16", 2),
-+      BCM6348_PIN(17, "gpio17", 2),
-+      BCM6348_PIN(18, "gpio18", 2),
-+      BCM6348_PIN(19, "gpio19", 2),
-+      BCM6348_PIN(20, "gpio20", 2),
-+      BCM6348_PIN(21, "gpio21", 2),
-+      BCM6348_PIN(22, "gpio22", 1),
-+      BCM6348_PIN(23, "gpio23", 1),
-+      BCM6348_PIN(24, "gpio24", 1),
-+      BCM6348_PIN(25, "gpio25", 1),
-+      BCM6348_PIN(26, "gpio26", 1),
-+      BCM6348_PIN(27, "gpio27", 1),
-+      BCM6348_PIN(28, "gpio28", 1),
-+      BCM6348_PIN(29, "gpio29", 1),
-+      BCM6348_PIN(30, "gpio30", 1),
-+      BCM6348_PIN(31, "gpio31", 1),
-+      BCM6348_PIN(32, "gpio32", 0),
-+      BCM6348_PIN(33, "gpio33", 0),
-+      BCM6348_PIN(34, "gpio34", 0),
-+      BCM6348_PIN(35, "gpio35", 0),
-+      BCM6348_PIN(36, "gpio36", 0),
-+};
-+
-+enum bcm6348_muxes {
-+      BCM6348_MUX_GPIO = 0,
-+      BCM6348_MUX_EXT_EPHY,
-+      BCM6348_MUX_MII_SNOOP,
-+      BCM6348_MUX_LEGACY_LED,
-+      BCM6348_MUX_MII_PCCARD,
-+      BCM6348_MUX_PCI,
-+      BCM6348_MUX_SPI_MASTER_UART,
-+      BCM6348_MUX_EXT_MII,
-+      BCM6348_MUX_UTOPIA,
-+      BCM6348_MUX_DIAG,
-+};
-+
-+static unsigned group0_pins[] = {
-+      32, 33, 34, 35, 36,
-+};
-+
-+static unsigned group1_pins[] = {
-+      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned group2_pins[] = {
-+      16, 17, 18, 19, 20, 21,
-+};
-+
-+static unsigned group3_pins[] = {
-+      8, 9, 10, 11, 12, 13, 14, 15,
-+};
-+
-+static unsigned group4_pins[] = {
-+      0, 1, 2, 3, 4, 5, 6, 7,
-+};
-+
-+#define BCM6348_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      } \
-+
-+static struct bcm6348_pingroup bcm6348_groups[] = {
-+      BCM6348_GROUP(group0),
-+      BCM6348_GROUP(group1),
-+      BCM6348_GROUP(group2),
-+      BCM6348_GROUP(group3),
-+      BCM6348_GROUP(group4),
-+};
-+
-+static const char * const ext_mii_groups[] = {
-+      "group0",
-+      "group3",
-+};
-+
-+static const char * const ext_ephy_groups[] = {
-+      "group1",
-+      "group4"
-+};
-+
-+static const char * const mii_snoop_groups[] = {
-+      "group1",
-+      "group4",
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "group4",
-+};
-+
-+static const char * const mii_pccard_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const pci_groups[] = {
-+      "group2",
-+};
-+
-+static const char * const spi_master_uart_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const utopia_groups[] = {
-+      "group0",
-+      "group1",
-+      "group3",
-+};
-+
-+static const char * const diag_groups[] = {
-+      "group0",
-+      "group1",
-+      "group2",
-+      "group4",
-+};
-+
-+#define BCM6348_FUN(n, f)                             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .value = BCM6348_MUX_##f,               \
-+      }
-+
-+static const struct bcm6348_function bcm6348_funcs[] = {
-+      BCM6348_FUN(ext_mii, EXT_MII),
-+      BCM6348_FUN(ext_ephy, EXT_EPHY),
-+      BCM6348_FUN(mii_snoop, MII_SNOOP),
-+      BCM6348_FUN(legacy_led, LEGACY_LED),
-+      BCM6348_FUN(mii_pccard, MII_PCCARD),
-+      BCM6348_FUN(pci, PCI),
-+      BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
-+      BCM6348_FUN(utopia, UTOPIA),
-+      BCM6348_FUN(diag, DIAG),
-+};
-+
-+static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_groups);
-+}
-+
-+static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6348_groups[group].name;
-+}
-+
-+static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6348_groups[group].pins;
-+      *num_pins = bcm6348_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_funcs);
-+}
-+
-+static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6348_funcs[selector].name;
-+}
-+
-+static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6348_funcs[selector].groups;
-+      *num_groups = bcm6348_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+
-+      reg = __raw_readl(pctl->mode);
-+      reg &= ~mask;
-+      reg |= val & mask;
-+      __raw_writel(reg, pctl->mode);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
-+      const struct bcm6348_function *f = &bcm6348_funcs[selector];
-+      u32 mask, val;
-+
-+      /*
-+       * pins n..(n+7) share the same group, so we only need to look at
-+       * the first pin.
-+       */
-+      mask = GROUP_MASK(grp->pins[0]);
-+      val = f->value << GROUP_SHIFT(grp->pins[0]);
-+
-+      bcm6348_rmw_mux(pctl, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      struct pin_desc *desc;
-+      u32 mask;
-+
-+      /* don't reconfigure if already muxed */
-+      desc = pin_desc_get(pctldev, offset);
-+      if (desc->mux_usecount)
-+              return 0;
-+
-+      mask = GROUP_MASK(offset);
-+
-+      /* disable all functions using this pin */
-+      bcm6348_rmw_mux(pctl, mask, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6348_pctl_ops = {
-+      .get_groups_count       = bcm6348_pinctrl_get_group_count,
-+      .get_group_name         = bcm6348_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6348_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6348_pmx_ops = {
-+      .get_functions_count    = bcm6348_pinctrl_get_func_count,
-+      .get_function_name      = bcm6348_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6348_pinctrl_get_groups,
-+      .set_mux                = bcm6348_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6348_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6348_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6348_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6348_pctl_ops;
-+      pctl->desc.pmxops = &bcm6348_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
-+      pctl->desc.pins = bcm6348_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6348_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6348_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6348-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6348_pinctrl_driver = {
-+      .probe = bcm6348_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6348-pinctrl",
-+              .of_match_table = bcm6348_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e8a7479..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:00 +0200
-Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6358 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-@@ -0,0 +1,44 @@
-+* Broadcom BCM6358 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6358-pinctrl".
-+- reg: Register specifiers of dirout, dat registers.
-+- reg-names: Must be "dirout", "dat".
-+- brcm,gpiomode: Phandle to the shared gpiomode register.
-+- gpio-controller: Identifies this node as a gpio-controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6358-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat";
-+      brcm,gpiomode = <&gpiomode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiomode: syscon@fffe0098 {
-+      compatible = "brcm,bcm6358-gpiomode", "syscon";
-+      reg = <0xfffe0098 0x4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+ebi_cs_grp    30-31           ebi_cs
-+uart1_grp     28-31           uart1
-+spi_cs_grp    32-33           spi_cs
-+async_modem_grp       12-15           async_modem
-+legacy_led_grp        9-15            legacy_led
-+serial_led_grp        6-7             serial_led
-+led_grp               0-3             led
-+utopia_grp    12-15, 22-31    utopia
-+pwm_syn_clk_grp       8               pwm_syn_clk
-+sys_irq_grp   5               sys_irq
diff --git a/target/linux/brcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/brcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
deleted file mode 100644 (file)
index 87dc741..0000000
+++ /dev/null
@@ -1,436 +0,0 @@
-From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:16:01 +0200
-Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
-
-Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
-functions onto the GPIO pins. It does not support configuring individual
-pins but only whole groups. These groups may overlap, and still require
-the directions to be set correctly in the GPIO register. In addition the
-functions register controls other, not directly mux related functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   8 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
- 3 files changed, 402 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6358
-+      bool "BCM6358 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
-+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-@@ -0,0 +1,393 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+/* GPIO_MODE register */
-+#define BCM6358_MODE_MUX_NONE         0
-+
-+/* overlays on gpio pins */
-+#define BCM6358_MODE_MUX_EBI_CS               BIT(5)
-+#define BCM6358_MODE_MUX_UART1                BIT(6)
-+#define BCM6358_MODE_MUX_SPI_CS               BIT(7)
-+#define BCM6358_MODE_MUX_ASYNC_MODEM  BIT(8)
-+#define BCM6358_MODE_MUX_LEGACY_LED   BIT(9)
-+#define BCM6358_MODE_MUX_SERIAL_LED   BIT(10)
-+#define BCM6358_MODE_MUX_LED          BIT(11)
-+#define BCM6358_MODE_MUX_UTOPIA               BIT(12)
-+#define BCM6358_MODE_MUX_CLKRST               BIT(13)
-+#define BCM6358_MODE_MUX_PWM_SYN_CLK  BIT(14)
-+#define BCM6358_MODE_MUX_SYS_IRQ      BIT(15)
-+
-+#define BCM6358_NGPIO                 40
-+
-+struct bcm6358_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+
-+      const u16 mode_val;
-+
-+      /* non-GPIO function muxes require the gpio direction to be set */
-+      const u16 direction;
-+};
-+
-+struct bcm6358_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+};
-+
-+struct bcm6358_pinctrl {
-+      struct device *dev;
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      struct regmap_field *overlays;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)              \
-+      {                                                       \
-+              .number = a,                                    \
-+              .name = b,                                      \
-+              .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |  \
-+                                   BCM6358_MODE_MUX_##bit2 |  \
-+                                   BCM6358_MODE_MUX_##bit3),  \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6358_pins[] = {
-+      BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
-+      PINCTRL_PIN(4, "gpio4"),
-+      BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
-+      BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
-+      BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
-+      BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+};
-+
-+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
-+
-+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
-+
-+static unsigned spi_cs_grp_pins[] = { 32, 33 };
-+
-+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
-+
-+static unsigned serial_led_grp_pins[] = { 6, 7 };
-+
-+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
-+
-+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
-+
-+static unsigned utopia_grp_pins[] = {
-+      12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
-+
-+static unsigned sys_irq_grp_pins[] = { 5 };
-+
-+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)                   \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+              .mode_val = BCM6358_MODE_MUX_##bit,             \
-+              .direction = dir,                               \
-+      }
-+
-+static const struct bcm6358_pingroup bcm6358_groups[] = {
-+      BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
-+      BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
-+      BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
-+      BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
-+      BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
-+      BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
-+};
-+
-+static const char * const ebi_cs_groups[] = {
-+      "ebi_cs_grp"
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp"
-+};
-+
-+static const char * const spi_cs_2_3_groups[] = {
-+      "spi_cs_2_3_grp"
-+};
-+
-+static const char * const async_modem_groups[] = {
-+      "async_modem_grp"
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "legacy_led_grp",
-+};
-+
-+static const char * const serial_led_groups[] = {
-+      "serial_led_grp",
-+};
-+
-+static const char * const led_groups[] = {
-+      "led_grp",
-+};
-+
-+static const char * const clkrst_groups[] = {
-+      "clkrst_grp",
-+};
-+
-+static const char * const pwm_syn_clk_groups[] = {
-+      "pwm_syn_clk_grp",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "sys_irq_grp",
-+};
-+
-+#define BCM6358_FUN(n)                                        \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+      }
-+
-+static const struct bcm6358_function bcm6358_funcs[] = {
-+      BCM6358_FUN(ebi_cs),
-+      BCM6358_FUN(uart1),
-+      BCM6358_FUN(spi_cs_2_3),
-+      BCM6358_FUN(async_modem),
-+      BCM6358_FUN(legacy_led),
-+      BCM6358_FUN(serial_led),
-+      BCM6358_FUN(led),
-+      BCM6358_FUN(clkrst),
-+      BCM6358_FUN(pwm_syn_clk),
-+      BCM6358_FUN(sys_irq),
-+};
-+
-+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_groups);
-+}
-+
-+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6358_groups[group].name;
-+}
-+
-+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6358_groups[group].pins;
-+      *num_pins = bcm6358_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_funcs);
-+}
-+
-+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6358_funcs[selector].name;
-+}
-+
-+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6358_funcs[selector].groups;
-+      *num_groups = bcm6358_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
-+      u32 val = grp->mode_val;
-+      u32 mask = val;
-+      unsigned pin;
-+
-+      for (pin = 0; pin < grp->num_pins; pin++)
-+              mask |= (unsigned long)bcm6358_pins[pin].drv_data;
-+
-+      regmap_field_update_bits(pctl->overlays, mask, val);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6358_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (grp->direction & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      u32 mask;
-+
-+      mask = (unsigned long)bcm6358_pins[offset].drv_data;
-+      if (!mask)
-+              return 0;
-+
-+      /* disable all functions using this pin */
-+      return regmap_field_update_bits(pctl->overlays, mask, 0);
-+}
-+
-+static struct pinctrl_ops bcm6358_pctl_ops = {
-+      .get_groups_count       = bcm6358_pinctrl_get_group_count,
-+      .get_group_name         = bcm6358_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6358_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6358_pmx_ops = {
-+      .get_functions_count    = bcm6358_pinctrl_get_func_count,
-+      .get_function_name      = bcm6358_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6358_pinctrl_get_groups,
-+      .set_mux                = bcm6358_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6358_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6358_pinctrl *pctl;
-+      struct regmap *mode;
-+      struct reg_field overlays = REG_FIELD(0, 0, 15);
-+
-+      if (pdev->dev.of_node)
-+              mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                     "brcm,gpiomode");
-+      else
-+              mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
-+
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
-+      if (IS_ERR(pctl->overlays))
-+              return PTR_ERR(pctl->overlays);
-+
-+      /* disable all muxes by default */
-+      regmap_field_write(pctl->overlays, 0);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6358_pctl_ops;
-+      pctl->desc.pmxops = &bcm6358_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
-+      pctl->desc.pins = bcm6358_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6358_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6358_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6358-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6358_pinctrl_driver = {
-+      .probe = bcm6358_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6358-pinctrl",
-+              .of_match_table = bcm6358_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 9fc424c..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:18 +0200
-Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6362 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6362 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl"
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6362-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000090 0x4>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0x4>,
-+            <0x100000b8 0x4>;
-+      reg-names = "dirout", "dat", "led",
-+                  "mode", "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, usb_device_led
-+gpio1         1               led, sys_irq
-+gpio2         2               led, serial_led_clk
-+gpio3         3               led, serial_led_data
-+gpio4         4               led, robosw_led_data
-+gpio5         5               led, robosw_led_clk
-+gpio6         6               led, robosw_led0
-+gpio7         7               led, robosw_led1
-+gpio8         8               led, inet_led
-+gpio9         9               led, spi_cs2
-+gpio10                10              led, spi_cs3
-+gpio11                11              led, ntr_pulse
-+gpio12                12              led, uart1_scts
-+gpio13                13              led, uart1_srts
-+gpio14                14              led, uart1_sdin
-+gpio15                15              led, uart1_sdout
-+gpio16                16              led, adsl_spi_miso
-+gpio17                17              led, adsl_spi_mosi
-+gpio18                18              led, adsl_spi_clk
-+gpio19                19              led, adsl_spi_cs
-+gpio20                20              led, ephy0_led
-+gpio21                21              led, ephy1_led
-+gpio22                22              led, ephy2_led
-+gpio23                23              led, ephy3_led
-+gpio24                24              ext_irq0
-+gpio25                25              ext_irq1
-+gpio26                26              ext_irq2
-+gpio27                27              ext_irq3
-+gpio28                28              -
-+gpio29                29              -
-+gpio30                30              -
-+gpio31                31              -
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+nand_grp      8, 12-23, 27    nand
diff --git a/target/linux/brcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/brcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
deleted file mode 100644 (file)
index 726a97f..0000000
+++ /dev/null
@@ -1,733 +0,0 @@
-From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:17:20 +0200
-Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
-
-Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
-GPIO pins to the LED controller, to be available by the integrated
-wifi, or other functions. It also supports overlay groups, of which
-only NAND is documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
- 3 files changed, 700 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-       select MFD_SYSCON
-+
-+config PINCTRL_BCM6362
-+      bool "BCM6362 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
-+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-@@ -0,0 +1,692 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6362_NGPIO 48
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND BIT(2)
-+
-+enum bcm6362_pinctrl_reg {
-+      BCM6362_LEDCTRL,
-+      BCM6362_MODE,
-+      BCM6362_CTRL,
-+      BCM6362_BASEMODE,
-+};
-+
-+struct bcm6362_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6362_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm6362_pinctrl_reg reg;
-+      u32 basemode_mask;
-+};
-+
-+struct bcm6362_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6362_PIN(a, b, mask)                       \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(mask),     \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6362_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
-+      BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
-+      BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
-+      BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
-+      BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
-+      BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
-+      BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
-+      BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
-+      BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
-+      BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
-+      BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
-+      BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+
-+static unsigned nand_grp_pins[] = {
-+      8, 12, 13, 14, 15, 16, 17,
-+      18, 19, 20, 21, 22, 23, 27,
-+};
-+
-+#define BCM6362_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6362_pingroup bcm6362_groups[] = {
-+      BCM6362_GROUP(gpio0),
-+      BCM6362_GROUP(gpio1),
-+      BCM6362_GROUP(gpio2),
-+      BCM6362_GROUP(gpio3),
-+      BCM6362_GROUP(gpio4),
-+      BCM6362_GROUP(gpio5),
-+      BCM6362_GROUP(gpio6),
-+      BCM6362_GROUP(gpio7),
-+      BCM6362_GROUP(gpio8),
-+      BCM6362_GROUP(gpio9),
-+      BCM6362_GROUP(gpio10),
-+      BCM6362_GROUP(gpio11),
-+      BCM6362_GROUP(gpio12),
-+      BCM6362_GROUP(gpio13),
-+      BCM6362_GROUP(gpio14),
-+      BCM6362_GROUP(gpio15),
-+      BCM6362_GROUP(gpio16),
-+      BCM6362_GROUP(gpio17),
-+      BCM6362_GROUP(gpio18),
-+      BCM6362_GROUP(gpio19),
-+      BCM6362_GROUP(gpio20),
-+      BCM6362_GROUP(gpio21),
-+      BCM6362_GROUP(gpio22),
-+      BCM6362_GROUP(gpio23),
-+      BCM6362_GROUP(gpio24),
-+      BCM6362_GROUP(gpio25),
-+      BCM6362_GROUP(gpio26),
-+      BCM6362_GROUP(gpio27),
-+      BCM6362_GROUP(gpio28),
-+      BCM6362_GROUP(gpio29),
-+      BCM6362_GROUP(gpio30),
-+      BCM6362_GROUP(gpio31),
-+      BCM6362_GROUP(gpio32),
-+      BCM6362_GROUP(gpio33),
-+      BCM6362_GROUP(gpio34),
-+      BCM6362_GROUP(gpio35),
-+      BCM6362_GROUP(gpio36),
-+      BCM6362_GROUP(gpio37),
-+      BCM6362_GROUP(gpio38),
-+      BCM6362_GROUP(gpio39),
-+      BCM6362_GROUP(gpio40),
-+      BCM6362_GROUP(gpio41),
-+      BCM6362_GROUP(gpio42),
-+      BCM6362_GROUP(gpio43),
-+      BCM6362_GROUP(gpio44),
-+      BCM6362_GROUP(gpio45),
-+      BCM6362_GROUP(gpio46),
-+      BCM6362_GROUP(gpio47),
-+      BCM6362_GROUP(nand_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const ntr_pulse_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio15",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const adsl_spi_clk_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_cs_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio21",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const ext_irq0_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const ext_irq1_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ext_irq2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ext_irq3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+#define BCM6362_LED_FUN(n)                            \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_LEDCTRL,                 \
-+      }
-+
-+#define BCM6362_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_MODE,                    \
-+      }
-+
-+#define BCM6362_CTRL_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_CTRL,                    \
-+      }
-+
-+#define BCM6362_BASEMODE_FUN(n, mask)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_BASEMODE,                \
-+              .basemode_mask = (mask),                \
-+      }
-+
-+static const struct bcm6362_function bcm6362_funcs[] = {
-+      BCM6362_LED_FUN(led),
-+      BCM6362_MODE_FUN(usb_device_led),
-+      BCM6362_MODE_FUN(sys_irq),
-+      BCM6362_MODE_FUN(serial_led_clk),
-+      BCM6362_MODE_FUN(serial_led_data),
-+      BCM6362_MODE_FUN(robosw_led_data),
-+      BCM6362_MODE_FUN(robosw_led_clk),
-+      BCM6362_MODE_FUN(robosw_led0),
-+      BCM6362_MODE_FUN(robosw_led1),
-+      BCM6362_MODE_FUN(inet_led),
-+      BCM6362_MODE_FUN(spi_cs2),
-+      BCM6362_MODE_FUN(spi_cs3),
-+      BCM6362_MODE_FUN(ntr_pulse),
-+      BCM6362_MODE_FUN(uart1_scts),
-+      BCM6362_MODE_FUN(uart1_srts),
-+      BCM6362_MODE_FUN(uart1_sdin),
-+      BCM6362_MODE_FUN(uart1_sdout),
-+      BCM6362_MODE_FUN(adsl_spi_miso),
-+      BCM6362_MODE_FUN(adsl_spi_mosi),
-+      BCM6362_MODE_FUN(adsl_spi_clk),
-+      BCM6362_MODE_FUN(adsl_spi_cs),
-+      BCM6362_MODE_FUN(ephy0_led),
-+      BCM6362_MODE_FUN(ephy1_led),
-+      BCM6362_MODE_FUN(ephy2_led),
-+      BCM6362_MODE_FUN(ephy3_led),
-+      BCM6362_MODE_FUN(ext_irq0),
-+      BCM6362_MODE_FUN(ext_irq1),
-+      BCM6362_MODE_FUN(ext_irq2),
-+      BCM6362_MODE_FUN(ext_irq3),
-+      BCM6362_CTRL_FUN(wifi),
-+      BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
-+};
-+
-+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_groups);
-+}
-+
-+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6362_groups[group].name;
-+}
-+
-+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6362_groups[group].pins;
-+      *num_pins = bcm6362_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_funcs);
-+}
-+
-+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6362_funcs[selector].name;
-+}
-+
-+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6362_funcs[selector].groups;
-+      *num_groups = bcm6362_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val & mask;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
-+      u32 mask = BIT(pin % 32);
-+
-+      if (desc->drv_data)
-+              bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
-+
-+      if (pin < 32) {
-+              /* base mode 0 => gpio 1 => mux function */
-+              bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else {
-+              /* ctrl reg 0 => wifi function 1 => gpio */
-+              bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
-+      const struct bcm6362_function *f = &bcm6362_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm6362_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM6362_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_MODE:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM6362_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->basemode_mask;
-+              val = f->basemode_mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm6362_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6362_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6362_pctl_ops = {
-+      .get_groups_count       = bcm6362_pinctrl_get_group_count,
-+      .get_group_name         = bcm6362_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6362_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6362_pmx_ops = {
-+      .get_functions_count    = bcm6362_pinctrl_get_func_count,
-+      .get_function_name      = bcm6362_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6362_pinctrl_get_groups,
-+      .set_mux                = bcm6362_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6362_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6362_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6362_pctl_ops;
-+      pctl->desc.pmxops = &bcm6362_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
-+      pctl->desc.pins = bcm6362_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6362_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6362_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6362-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6362_pinctrl_driver = {
-+      .probe = bcm6362_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6362-pinctrl",
-+              .of_match_table = bcm6362_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e0a698f..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:51 +0200
-Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6368 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-@@ -0,0 +1,67 @@
-+* Broadcom BCM6368 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6368-pinctrl".
-+- reg: Register specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- brcm,gpiobasemode: Phandle to the gpio basemode register.
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6368-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>;
-+      reg-names = "dirout", "dat", "mode";
-+      brcm,gpiobasemode = <&gpiobasemode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiobasemode: syscon@100000b8 {
-+      compatible = "brcm,bcm6368-gpiobasemode", "syscon";
-+      reg = <0x100000b8 4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       analog_afe0
-+gpio1         1       analog_afe1
-+gpio2         2       sys_irq
-+gpio3         3       serial_led_data
-+gpio4         4       serial_led_clk
-+gpio5         5       inet_led
-+gpio6         6       ephy0_led
-+gpio7         7       ephy1_led
-+gpio8         8       ephy2_led
-+gpio9         9       ephy3_led
-+gpio10                10      robosw_led_data
-+gpio11                11      robosw_led_clk
-+gpio12                12      robosw_led0
-+gpio13                13      robosw_led1
-+gpio14                14      usb_device_led
-+gpio15                15      -
-+gpio16                16      pci_req1
-+gpio17                17      pci_gnt1
-+gpio18                18      pci_intb
-+gpio19                19      pci_req0
-+gpio20                20      pci_gnt0
-+gpio21                21      -
-+gpio22                22      pcmcia_cd1
-+gpio23                23      pcmcia_cd2
-+gpio24                24      pcmcia_vs1
-+gpio25                25      pcmcia_vs2
-+gpio26                26      ebi_cs2
-+gpio27                27      ebi_cs3
-+gpio28                28      spi_cs2
-+gpio29                29      spi_cs3
-+gpio30                30      spi_cs4
-+gpio31                31      spi_cs5
-+uart1_grp     30-33   uart1
diff --git a/target/linux/brcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/brcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
deleted file mode 100644 (file)
index 6a9b9e0..0000000
+++ /dev/null
@@ -1,620 +0,0 @@
-From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:18:25 +0200
-Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
-
-Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
-GPIOs onto alternative functions. Not all are documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |  15 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
- 3 files changed, 589 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6368
-+      bool "BCM6368 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
-+
-+config PINCTRL_BCM63268
-+      bool "BCM63268 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
-+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-@@ -0,0 +1,573 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6368_NGPIO 38
-+
-+#define BCM6368_BASEMODE_MASK 0x7
-+#define BCM6368_BASEMODE_GPIO 0x0
-+#define BCM6368_BASEMODE_UART1        0x1
-+
-+struct bcm6368_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6368_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned dir_out:16;
-+      unsigned basemode:3;
-+};
-+
-+struct bcm6368_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      struct regmap_field *overlay;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6368_BASEMODE_PIN(a, b)            \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)true        \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6368_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      BCM6368_BASEMODE_PIN(30, "gpio30"),
-+      BCM6368_BASEMODE_PIN(31, "gpio31"),
-+      BCM6368_BASEMODE_PIN(32, "gpio32"),
-+      BCM6368_BASEMODE_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
-+
-+#define BCM6368_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6368_pingroup bcm6368_groups[] = {
-+      BCM6368_GROUP(gpio0),
-+      BCM6368_GROUP(gpio1),
-+      BCM6368_GROUP(gpio2),
-+      BCM6368_GROUP(gpio3),
-+      BCM6368_GROUP(gpio4),
-+      BCM6368_GROUP(gpio5),
-+      BCM6368_GROUP(gpio6),
-+      BCM6368_GROUP(gpio7),
-+      BCM6368_GROUP(gpio8),
-+      BCM6368_GROUP(gpio9),
-+      BCM6368_GROUP(gpio10),
-+      BCM6368_GROUP(gpio11),
-+      BCM6368_GROUP(gpio12),
-+      BCM6368_GROUP(gpio13),
-+      BCM6368_GROUP(gpio14),
-+      BCM6368_GROUP(gpio15),
-+      BCM6368_GROUP(gpio16),
-+      BCM6368_GROUP(gpio17),
-+      BCM6368_GROUP(gpio18),
-+      BCM6368_GROUP(gpio19),
-+      BCM6368_GROUP(gpio20),
-+      BCM6368_GROUP(gpio21),
-+      BCM6368_GROUP(gpio22),
-+      BCM6368_GROUP(gpio23),
-+      BCM6368_GROUP(gpio24),
-+      BCM6368_GROUP(gpio25),
-+      BCM6368_GROUP(gpio26),
-+      BCM6368_GROUP(gpio27),
-+      BCM6368_GROUP(gpio28),
-+      BCM6368_GROUP(gpio29),
-+      BCM6368_GROUP(gpio30),
-+      BCM6368_GROUP(gpio31),
-+      BCM6368_GROUP(uart1_grp),
-+};
-+
-+static const char * const analog_afe_0_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const analog_afe_1_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const pci_req1_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const pci_gnt1_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const pci_intb_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const pci_req0_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const pci_gnt0_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const pcmcia_cd1_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcmcia_cd2_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const pcmcia_vs1_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const pcmcia_vs2_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ebi_cs2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ebi_cs3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio29",
-+};
-+
-+static const char * const spi_cs4_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const spi_cs5_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp",
-+};
-+
-+#define BCM6368_FUN(n, out)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .dir_out = out,                         \
-+      }
-+
-+#define BCM6368_BASEMODE_FUN(n, val, out)             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .basemode = BCM6368_BASEMODE_##val,     \
-+              .dir_out = out,                         \
-+      }
-+
-+static const struct bcm6368_function bcm6368_funcs[] = {
-+      BCM6368_FUN(analog_afe_0, 1),
-+      BCM6368_FUN(analog_afe_1, 1),
-+      BCM6368_FUN(sys_irq, 1),
-+      BCM6368_FUN(serial_led_data, 1),
-+      BCM6368_FUN(serial_led_clk, 1),
-+      BCM6368_FUN(inet_led, 1),
-+      BCM6368_FUN(ephy0_led, 1),
-+      BCM6368_FUN(ephy1_led, 1),
-+      BCM6368_FUN(ephy2_led, 1),
-+      BCM6368_FUN(ephy3_led, 1),
-+      BCM6368_FUN(robosw_led_data, 1),
-+      BCM6368_FUN(robosw_led_clk, 1),
-+      BCM6368_FUN(robosw_led0, 1),
-+      BCM6368_FUN(robosw_led1, 1),
-+      BCM6368_FUN(usb_device_led, 1),
-+      BCM6368_FUN(pci_req1, 0),
-+      BCM6368_FUN(pci_gnt1, 0),
-+      BCM6368_FUN(pci_intb, 0),
-+      BCM6368_FUN(pci_req0, 0),
-+      BCM6368_FUN(pci_gnt0, 0),
-+      BCM6368_FUN(pcmcia_cd1, 0),
-+      BCM6368_FUN(pcmcia_cd2, 0),
-+      BCM6368_FUN(pcmcia_vs1, 0),
-+      BCM6368_FUN(pcmcia_vs2, 0),
-+      BCM6368_FUN(ebi_cs2, 1),
-+      BCM6368_FUN(ebi_cs3, 1),
-+      BCM6368_FUN(spi_cs2, 1),
-+      BCM6368_FUN(spi_cs3, 1),
-+      BCM6368_FUN(spi_cs4, 1),
-+      BCM6368_FUN(spi_cs5, 1),
-+      BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
-+};
-+
-+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_groups);
-+}
-+
-+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6368_groups[group].name;
-+}
-+
-+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6368_groups[group].pins;
-+      *num_pins = bcm6368_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_funcs);
-+}
-+
-+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6368_funcs[selector].name;
-+}
-+
-+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6368_funcs[selector].groups;
-+      *num_groups = bcm6368_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      u32 tmp;
-+
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= (val & mask);
-+      __raw_writel(tmp, reg);
-+}
-+
-+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
-+      const struct bcm6368_function *fun = &bcm6368_funcs[selector];
-+      unsigned long flags;
-+      int i, pin;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (fun->basemode) {
-+              u32 mask = 0;
-+
-+              for (i = 0; i < grp->num_pins; i++) {
-+                      pin = grp->pins[i];
-+                      if (pin < 32)
-+                              mask |= BIT(pin);
-+              }
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
-+              regmap_field_write(pctl->overlay, fun->basemode);
-+      } else {
-+              pin = grp->pins[0];
-+
-+              if (bcm6368_pins[pin].drv_data)
-+                      regmap_field_write(pctl->overlay,
-+                                         BCM6368_BASEMODE_GPIO);
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6368_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (fun->dir_out & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      unsigned long flags;
-+
-+      if (offset >= 32 && !bcm6368_pins[offset].drv_data)
-+              return 0;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      /* disable all functions using this pin */
-+      if (offset < 32)
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
-+
-+      if (bcm6368_pins[offset].drv_data)
-+              regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6368_pctl_ops = {
-+      .get_groups_count       = bcm6368_pinctrl_get_group_count,
-+      .get_group_name         = bcm6368_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6368_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6368_pmx_ops = {
-+      .get_functions_count    = bcm6368_pinctrl_get_func_count,
-+      .get_function_name      = bcm6368_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6368_pinctrl_get_groups,
-+      .set_mux                = bcm6368_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6368_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6368_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+      struct regmap *basemode;
-+      struct reg_field overlay = REG_FIELD(0, 0, 3);
-+
-+      if (pdev->dev.of_node)
-+              basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                         "brcm,gpiobasemode");
-+      else
-+              basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
-+
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
-+      if (IS_ERR(pctl->overlay))
-+              return PTR_ERR(pctl->overlay);
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6368_pctl_ops;
-+      pctl->desc.pmxops = &bcm6368_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
-+      pctl->desc.pins = bcm6368_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6368_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6368_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6368-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6368_pinctrl_driver = {
-+      .probe = bcm6368_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6368-pinctrl",
-+              .of_match_table = bcm6368_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/brcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
deleted file mode 100644 (file)
index ffe842f..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:37:08 +0200
-Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in the BCM63268
-family SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-@@ -0,0 +1,88 @@
-+* Broadcom BCM63268 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl".
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@100000c0 {
-+      compatible = "brcm,bcm63268-pinctrl";
-+      reg = <0x100000c0 0x8>,
-+            <0x100000c8 0x8>,
-+            <0x100000d0 0x4>,
-+            <0x100000d8 0x4>,
-+            <0x100000dc 0x4>,
-+            <0x100000f8 0x4>;
-+      reg-names = "dirout", "dat", "led", "mode",
-+                  "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, serial_led_clk
-+gpio1         1               led, serial_led_data
-+gpio2         2               led,
-+gpio3         3               led,
-+gpio4         4               led,
-+gpio5         5               led,
-+gpio6         6               led,
-+gpio7         7               led,
-+gpio8         8               led, hsspi_cs6
-+gpio9         9               led, hsspi_cs7
-+gpio10                10              led, uart1_scts
-+gpio11                11              led, uart1_srts
-+gpio12                12              led, uart1_sdin
-+gpio13                13              led, uart1_sdout
-+gpio14                14              led, ntr_pulse_in
-+gpio15                15              led, dsl_ntr_pulse_out
-+gpio16                16              led, hsspi_cs4
-+gpio17                17              led, hsspi_cs5
-+gpio18                18              led, adsl_spi_miso
-+gpio19                19              led, adsl_spi_mosi
-+gpio20                20              led,
-+gpio21                21              led,
-+gpio22                22              led, vreg_clk
-+gpio23                23              led, pcie_clkreq_b
-+gpio24                24              uart1_scts
-+gpio25                25              uart1_srts
-+gpio26                26              uart1_sdin
-+gpio27                27              uart1_sdout
-+gpio28                28              ntr_pulse_in
-+gpio29                29              dsl_ntr_pulse_out
-+gpio30                30              switch_led_clk
-+gpio31                31              switch_led_data
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+gpio48                48              wifi
-+gpio49                49              wifi
-+gpio50                50              wifi
-+gpio51                51              wifi
-+nand_grp      2-7,24-31       nand
-+dect_pd_grp   8-9             dect_pd
-+vdsl_phy0_grp 10-11           vdsl_phy0
-+vdsl_phy1_grp 12-13           vdsl_phy1
-+vdsl_phy2_grp 24-25           vdsl_phy2
-+vdsl_phy3_grp 26-27           vdsl_phy3
diff --git a/target/linux/brcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
deleted file mode 100644 (file)
index 089d14e..0000000
+++ /dev/null
@@ -1,736 +0,0 @@
-From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:19:12 +0200
-Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
-
-Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
-to different functions. Depending on the mux, these are either single
-pin configurations or whole pin groups.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Makefile           |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
- 2 files changed, 711 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
- obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
-+obj-$(CONFIG_PINCTRL_BCM63268)        += pinctrl-bcm63268.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-@@ -0,0 +1,710 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM63268_NGPIO                        52
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND                 BIT(2) /* GPIOs 2-7, 24-31 */
-+#define BASEMODE_GPIO35                       BIT(4) /* GPIO 35 */
-+#define BASEMODE_DECTPD                       BIT(5) /* GPIOs 8/9 */
-+#define BASEMODE_VDSL_PHY_0           BIT(6) /* GPIOs 10/11 */
-+#define BASEMODE_VDSL_PHY_1           BIT(7) /* GPIOs 12/13 */
-+#define BASEMODE_VDSL_PHY_2           BIT(8) /* GPIOs 24/25 */
-+#define BASEMODE_VDSL_PHY_3           BIT(9) /* GPIOs 26/27 */
-+
-+enum bcm63268_pinctrl_reg {
-+      BCM63268_LEDCTRL,
-+      BCM63268_MODE,
-+      BCM63268_CTRL,
-+      BCM63268_BASEMODE,
-+};
-+
-+struct bcm63268_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm63268_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm63268_pinctrl_reg reg;
-+      u32 mask;
-+};
-+
-+struct bcm63268_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM63268_PIN(a, b, basemode)                  \
-+      {                                               \
-+              .number = a,                            \
-+              .name = b,                              \
-+              .drv_data = (void *)(basemode)          \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm63268_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
-+      BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
-+      BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
-+      BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
-+      BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
-+      BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
-+      BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
-+      BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
-+      BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
-+      BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
-+      BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
-+      BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
-+      BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+      PINCTRL_PIN(50, "gpio50"),
-+      PINCTRL_PIN(51, "gpio51"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+static unsigned gpio50_pins[] = { 50 };
-+static unsigned gpio51_pins[] = { 51 };
-+
-+static unsigned nand_grp_pins[] = {
-+      2, 3, 4, 5, 6, 7, 24,
-+      25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned dectpd_grp_pins[] = { 8, 9 };
-+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
-+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
-+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
-+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
-+
-+#define BCM63268_GROUP(n)                                     \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm63268_pingroup bcm63268_groups[] = {
-+      BCM63268_GROUP(gpio0),
-+      BCM63268_GROUP(gpio1),
-+      BCM63268_GROUP(gpio2),
-+      BCM63268_GROUP(gpio3),
-+      BCM63268_GROUP(gpio4),
-+      BCM63268_GROUP(gpio5),
-+      BCM63268_GROUP(gpio6),
-+      BCM63268_GROUP(gpio7),
-+      BCM63268_GROUP(gpio8),
-+      BCM63268_GROUP(gpio9),
-+      BCM63268_GROUP(gpio10),
-+      BCM63268_GROUP(gpio11),
-+      BCM63268_GROUP(gpio12),
-+      BCM63268_GROUP(gpio13),
-+      BCM63268_GROUP(gpio14),
-+      BCM63268_GROUP(gpio15),
-+      BCM63268_GROUP(gpio16),
-+      BCM63268_GROUP(gpio17),
-+      BCM63268_GROUP(gpio18),
-+      BCM63268_GROUP(gpio19),
-+      BCM63268_GROUP(gpio20),
-+      BCM63268_GROUP(gpio21),
-+      BCM63268_GROUP(gpio22),
-+      BCM63268_GROUP(gpio23),
-+      BCM63268_GROUP(gpio24),
-+      BCM63268_GROUP(gpio25),
-+      BCM63268_GROUP(gpio26),
-+      BCM63268_GROUP(gpio27),
-+      BCM63268_GROUP(gpio28),
-+      BCM63268_GROUP(gpio29),
-+      BCM63268_GROUP(gpio30),
-+      BCM63268_GROUP(gpio31),
-+      BCM63268_GROUP(gpio32),
-+      BCM63268_GROUP(gpio33),
-+      BCM63268_GROUP(gpio34),
-+      BCM63268_GROUP(gpio35),
-+      BCM63268_GROUP(gpio36),
-+      BCM63268_GROUP(gpio37),
-+      BCM63268_GROUP(gpio38),
-+      BCM63268_GROUP(gpio39),
-+      BCM63268_GROUP(gpio40),
-+      BCM63268_GROUP(gpio41),
-+      BCM63268_GROUP(gpio42),
-+      BCM63268_GROUP(gpio43),
-+      BCM63268_GROUP(gpio44),
-+      BCM63268_GROUP(gpio45),
-+      BCM63268_GROUP(gpio46),
-+      BCM63268_GROUP(gpio47),
-+      BCM63268_GROUP(gpio48),
-+      BCM63268_GROUP(gpio49),
-+      BCM63268_GROUP(gpio50),
-+      BCM63268_GROUP(gpio51),
-+
-+      /* multi pin groups */
-+      BCM63268_GROUP(nand_grp),
-+      BCM63268_GROUP(dectpd_grp),
-+      BCM63268_GROUP(vdsl_phy0_grp),
-+      BCM63268_GROUP(vdsl_phy1_grp),
-+      BCM63268_GROUP(vdsl_phy2_grp),
-+      BCM63268_GROUP(vdsl_phy3_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const hsspi_cs4_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const hsspi_cs5_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const hsspi_cs6_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const hsspi_cs7_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio10",
-+      "gpio24",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio11",
-+      "gpio25",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio12",
-+      "gpio26",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio13",
-+      "gpio27",
-+};
-+
-+static const char * const ntr_pulse_in_groups[] = {
-+      "gpio14",
-+      "gpio28",
-+};
-+
-+static const char * const dsl_ntr_pulse_out_groups[] = {
-+      "gpio15",
-+      "gpio29",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const vreg_clk_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcie_clkreq_b_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const switch_led_clk_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const switch_led_data_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+      "gpio48",
-+      "gpio49",
-+      "gpio50",
-+      "gpio51",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+static const char * const dectpd_groups[] = {
-+      "dectpd_grp",
-+};
-+
-+static const char * const vdsl_phy_override_0_groups[] = {
-+      "vdsl_phy_override_0_grp",
-+};
-+
-+static const char * const vdsl_phy_override_1_groups[] = {
-+      "vdsl_phy_override_1_grp",
-+};
-+
-+static const char * const vdsl_phy_override_2_groups[] = {
-+      "vdsl_phy_override_2_grp",
-+};
-+
-+static const char * const vdsl_phy_override_3_groups[] = {
-+      "vdsl_phy_override_3_grp",
-+};
-+
-+#define BCM63268_LED_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_LEDCTRL,                \
-+      }
-+
-+#define BCM63268_MODE_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_MODE,                   \
-+      }
-+
-+#define BCM63268_CTRL_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_CTRL,                   \
-+      }
-+
-+#define BCM63268_BASEMODE_FUN(n, val)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_BASEMODE,               \
-+              .mask = val,                            \
-+      }
-+
-+static const struct bcm63268_function bcm63268_funcs[] = {
-+      BCM63268_LED_FUN(led),
-+      BCM63268_MODE_FUN(serial_led_clk),
-+      BCM63268_MODE_FUN(serial_led_data),
-+      BCM63268_MODE_FUN(hsspi_cs6),
-+      BCM63268_MODE_FUN(hsspi_cs7),
-+      BCM63268_MODE_FUN(uart1_scts),
-+      BCM63268_MODE_FUN(uart1_srts),
-+      BCM63268_MODE_FUN(uart1_sdin),
-+      BCM63268_MODE_FUN(uart1_sdout),
-+      BCM63268_MODE_FUN(ntr_pulse_in),
-+      BCM63268_MODE_FUN(dsl_ntr_pulse_out),
-+      BCM63268_MODE_FUN(hsspi_cs4),
-+      BCM63268_MODE_FUN(hsspi_cs5),
-+      BCM63268_MODE_FUN(adsl_spi_miso),
-+      BCM63268_MODE_FUN(adsl_spi_mosi),
-+      BCM63268_MODE_FUN(vreg_clk),
-+      BCM63268_MODE_FUN(pcie_clkreq_b),
-+      BCM63268_MODE_FUN(switch_led_clk),
-+      BCM63268_MODE_FUN(switch_led_data),
-+      BCM63268_CTRL_FUN(wifi),
-+      BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
-+      BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
-+};
-+
-+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_groups);
-+}
-+
-+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                 unsigned group)
-+{
-+      return bcm63268_groups[group].name;
-+}
-+
-+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                         unsigned group,
-+                                         const unsigned **pins,
-+                                         unsigned *num_pins)
-+{
-+      *pins = bcm63268_groups[group].pins;
-+      *num_pins = bcm63268_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_funcs);
-+}
-+
-+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                                unsigned selector)
-+{
-+      return bcm63268_funcs[selector].name;
-+}
-+
-+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                     unsigned selector,
-+                                     const char * const **groups,
-+                                     unsigned * const num_groups)
-+{
-+      *groups = bcm63268_funcs[selector].groups;
-+      *num_groups = bcm63268_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
-+                           u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
-+      u32 basemode = (unsigned long)desc->drv_data;
-+      u32 mask = BIT(pin % 32);
-+
-+      if (basemode)
-+              bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
-+
-+      if (pin < 32) {
-+              /* base mode: 0 => gpio, 1 => mux function */
-+              bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else if (pin < 52) {
-+              /* ctrl reg: 0 => wifi function, 1 => gpio */
-+              bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                  unsigned selector, unsigned group)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
-+      const struct bcm63268_function *f = &bcm63268_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm63268_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM63268_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_MODE:
-+              reg = pctl->mode;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM63268_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->mask;
-+              val = f->mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm63268_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                      struct pinctrl_gpio_range *range,
-+                                      unsigned offset)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm63268_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm63268_pctl_ops = {
-+      .get_groups_count       = bcm63268_pinctrl_get_group_count,
-+      .get_group_name         = bcm63268_pinctrl_get_group_name,
-+      .get_group_pins         = bcm63268_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm63268_pmx_ops = {
-+      .get_functions_count    = bcm63268_pinctrl_get_func_count,
-+      .get_function_name      = bcm63268_pinctrl_get_func_name,
-+      .get_function_groups    = bcm63268_pinctrl_get_groups,
-+      .set_mux                = bcm63268_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm63268_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm63268_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm63268_pctl_ops;
-+      pctl->desc.pmxops = &bcm63268_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
-+      pctl->desc.pins = bcm63268_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM63268_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm63268_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm63268-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm63268_pinctrl_driver = {
-+      .probe = bcm63268_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm63268-pinctrl",
-+              .of_match_table = bcm63268_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/brcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
deleted file mode 100644 (file)
index bbd3981..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Nov 2017 12:07:31 +0100
-Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
- controllers
-
-For dual role gpio and pincontrol controller, the device registration
-path is often:
-
-  pinctrl_register(...);
-  gpiochip_add_data(...);
-  gpiochip_add_pin_range(...);
-
-If the device tree node has any gpio-hogs, the code will try to apply them
-in the gpiochip_add_data step, but fail as they cannot be requested, as the
-ranges are missing. But we also cannot first add the pinranges, as the
-appropriate data structures are only initialized in gpiochip_add_data.
-
-To fix this, defer gpio-hogs to the time pin ranges get added instead of
-directly at chip request time, if the gpio-chip has a request method.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-
- drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
- drivers/gpio/gpiolib.c    |  5 +++--
- drivers/gpio/gpiolib.h    |  8 ++++++++
- 3 files changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -237,12 +237,15 @@ static struct gpio_desc *of_parse_own_gp
- /**
-  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
-  * @chip:     gpio chip to act on
-+ * @start:    first gpio to check
-+ * @num:      number of gpios to check
-  *
-- * This is only used by of_gpiochip_add to request/set GPIO initial
-- * configuration.
-+ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
-+ * gpiochip_add_pin_range to request/set GPIO initial configuration.
-  * It returns error if it fails otherwise 0 on success.
-  */
--static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num)
- {
-       struct gpio_desc *desc = NULL;
-       struct device_node *np;
-@@ -250,7 +253,7 @@ static int of_gpiochip_scan_gpios(struct
-       enum gpio_lookup_flags lflags;
-       enum gpiod_flags dflags;
-       unsigned int i;
--      int ret;
-+      int ret, hwgpio;
-       for_each_available_child_of_node(chip->of_node, np) {
-               if (!of_property_read_bool(np, "gpio-hog"))
-@@ -262,6 +265,10 @@ static int of_gpiochip_scan_gpios(struct
-                       if (IS_ERR(desc))
-                               break;
-+                      hwgpio = gpio_chip_hwgpio(desc);
-+                      if (hwgpio < start || hwgpio >= (start + num))
-+                              continue;
-+
-                       ret = gpiod_hog(desc, name, lflags, dflags);
-                       if (ret < 0) {
-                               of_node_put(np);
-@@ -499,12 +506,13 @@ int of_gpiochip_add(struct gpio_chip *ch
-       of_node_get(chip->of_node);
--      status = of_gpiochip_scan_gpios(chip);
--      if (status) {
--              of_node_put(chip->of_node);
--              gpiochip_remove_pin_ranges(chip);
-+      if (!chip->request) {
-+              status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
-+              if (status) {
-+                      of_node_put(chip->of_node);
-+                      gpiochip_remove_pin_ranges(chip);
-+              }
-       }
--
-       return status;
- }
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -1958,7 +1958,8 @@ int gpiochip_add_pingroup_range(struct g
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset,
-+                                    pin_range->range.npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
-@@ -2010,7 +2011,7 @@ int gpiochip_add_pin_range(struct gpio_c
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
---- a/drivers/gpio/gpiolib.h
-+++ b/drivers/gpio/gpiolib.h
-@@ -99,6 +99,8 @@ struct gpio_desc *of_get_named_gpiod_fla
-                  const char *list_name, int index, enum of_gpio_flags *flags);
- int of_gpiochip_add(struct gpio_chip *gc);
- void of_gpiochip_remove(struct gpio_chip *gc);
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num);
- #else
- static inline struct gpio_desc *of_find_gpio(struct device *dev,
-                                            const char *con_id,
-@@ -114,6 +116,12 @@ static inline struct gpio_desc *of_get_n
- }
- static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
- static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
-+static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
-+                                       unsigned int start,
-+                                       unsigned int num)
-+{
-+      return 0;
-+}
- #endif /* CONFIG_OF_GPIO */
- #ifdef CONFIG_ACPI
diff --git a/target/linux/brcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644 (file)
index e7ebb0b..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -678,6 +678,10 @@ int ehci_setup(struct usb_hcd *hcd)
-       /* cache this readonly data; minimize chip reads */
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      if (ehci->num_ports) {
-+              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+              ehci->hcs_params |= ehci->num_ports;
-+      }
-       ehci->sbrn = HCD_USB2;
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -62,6 +62,9 @@ static int ehci_platform_reset(struct us
-       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-+      if (pdata->num_ports && pdata->num_ports <= 15)
-+              ehci->num_ports = pdata->num_ports;
-+
-       if (pdata->pre_setup) {
-               retval = pdata->pre_setup(hcd);
-               if (retval < 0)
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -216,6 +216,7 @@ struct ehci_hcd {                  /* one per controlle
-       u32                     command;
-       /* SILICON QUIRKS */
-+      unsigned int            num_ports;
-       unsigned                no_selective_suspend:1;
-       unsigned                has_fsl_port_bug:1; /* FreeScale */
-       unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -42,6 +42,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
-       int             caps_offset;
-+      unsigned int    num_ports;
-       unsigned        has_tt:1;
-       unsigned        has_synopsys_hc_bug:1;
-       unsigned        big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/brcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644 (file)
index 90b1640..0000000
+++ /dev/null
@@ -1,484 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
-+obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,33 +12,21 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- #define HCS_OFFSET_128K                       0x20000
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -695,52 +683,6 @@ static const struct board_info __initcon
- };
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              pr_err("unable to fill SPROM for given bustype\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--      return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -785,137 +727,15 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+              board_early_setup(bcm963xx_boards[i]);
-               break;
-       }
--      /* bail out if board is not found, will complain later */
--      if (!board.name[0]) {
-+      /* warn if board is not found, will complain later */
-+      if (i == ARRAY_SIZE(bcm963xx_boards)) {
-               char name[17];
-               memcpy(name, board_name, 16);
-               name[16] = 0;
-               pr_err("unknown bcm963xx board: %s\n", name);
--              return;
--      }
--
--      /* setup pin multiplexing depending on board enabled device,
--       * this has to be done this early since PCI init is done
--       * inside arch_initcall */
--      val = 0;
--
--#ifdef CONFIG_PCI
--      if (board.has_pci) {
--              bcm63xx_pci_enabled = 1;
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G2_PCI;
-       }
--#endif
--
--      if (board.has_pccard) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
--      }
--
--      if (board.has_enet0 && !board.enet0.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      if (board.has_enet1 && !board.enet1.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--      if (!board.name[0])
--              panic("unable to detect bcm963xx board");
--      pr_info("board name: %s\n", board.name);
--
--      /* make sure we're running on expected cpu */
--      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--              panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--      .name                   = "leds-gpio",
--      .id                     = 0,
--      .dev.platform_data      = &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
--      if (board.has_pccard)
--              bcm63xx_pcmcia_register();
--
--      if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--              bcm63xx_enet_register(0, &board.enet0);
--
--      if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--              bcm63xx_enet_register(1, &board.enet1);
--
--      if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--              bcm63xx_enetsw_register(&board.enetsw);
--
--      if (board.has_usbd)
--              bcm63xx_usbd_register(&board.usbd);
--
--      if (board.has_ehci0)
--              bcm63xx_ehci_register();
--
--      if (board.has_ohci0)
--              bcm63xx_ohci_register();
--
--      /* Generate MAC address for WLAN and register our SPROM,
--       * do this after registering enet devices
--       */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err("failed to register fallback SPROM\n");
--      }
--#endif
--
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
--      bcm63xx_flash_register();
--
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
--
--      platform_device_register(&bcm63xx_gpio_leds);
--
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
--
--      return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,214 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+      u32 val;
-+
-+      memcpy(&board, target, sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_enetsw &&
-+          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+              bcm63xx_enetsw_register(&board.enetsw);
-+
-+      if (board.has_usbd)
-+              bcm63xx_usbd_register(&board.usbd);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      /* Generate MAC address for WLAN and register our SPROM,
-+       * do this after registering enet devices
-+       */
-+#ifdef CONFIG_SSB_PCIHOST
-+      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              if (ssb_arch_register_fallback_sprom(
-+                              &bcm63xx_get_fallback_sprom) < 0)
-+                      pr_err(PFX "failed to register fallback SPROM\n");
-+      }
-+#endif
-+
-+      bcm63xx_spi_register();
-+
-+      bcm63xx_hsspi_register();
-+
-+      bcm63xx_flash_register();
-+
-+      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+              gpio_request_one(board.ephy_reset_gpio,
-+                              board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+      return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/brcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644 (file)
index 7f9479b..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -727,7 +727,8 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              board_early_setup(bcm963xx_boards[i]);
-+              board_early_setup(bcm963xx_boards[i],
-+                                bcm63xx_nvram_get_mac_address);
-               break;
-       }
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
-       u32 val;
-       memcpy(&board, target, sizeof(board));
-+      board_get_mac_address = get_mac_address;
-+
-       /* setup pin multiplexing depending on board enabled device,
-        * this has to be done this early since PCI init is done
-        * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
-               bcm63xx_pcmcia_register();
-       if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+          !board_get_mac_address(board.enet0.mac_addr))
-               bcm63xx_enet_register(0, &board.enet0);
-       if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+          !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-       if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+          !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-       if (board.has_usbd)
-@@ -186,7 +190,7 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- #include <board_bcm963xx.h>
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.14/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-4.14/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index fe6c6d2..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -707,10 +707,20 @@ void __init board_prom_init(void)
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--      if (!memcmp(cfe, "cfe-v", 5))
--              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--      else
-+      if (strstarts(cfe, "cfe-")) {
-+              if(cfe[4] == 'v') {
-+                      if(cfe[5] == 'd')
-+                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+                      else if (cfe[10] > 0)
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+                      else
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+              } else {
-+                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+              }
-+      } else
-               strcpy(cfe_version, "unknown");
-       pr_info("CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-4.14/310-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-4.14/310-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index 0e4e759..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -2,6 +2,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -10,4 +12,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index bca6adb..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,6 +35,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-+ 
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -46,30 +48,6 @@
- #define STR_NULL_TERMINATE(x) \
-       do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_read_nvram(struct mtd_info *master,
-       struct bcm963xx_nvram *nvram)
- {
-@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
-       struct bcm963xx_nvram *nvram = NULL;
-       int ret;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/brcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/brcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644 (file)
index 7235d1f..0000000
+++ /dev/null
@@ -1,455 +0,0 @@
-From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 410 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+      compatible = "brcm,bcm6345-periph-intc";
-+      reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+      interrupt-controller;
-+      #interrupt-cells = <1>;
-+
-+      interrupt-parent = <&cpu_intc>;
-+      interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_PERIPH_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config DW_APB_ICTL
-       bool
-       select GENERIC_IRQ_CHIP
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
- obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)  += irq-metag.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,339 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE     IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE     0
-+#endif
-+
-+#define MAX_WORDS     4
-+#define MAX_PARENT_IRQS       2
-+#define IRQS_PER_WORD 32
-+
-+struct intc_block {
-+      int parent_irq;
-+      void __iomem *base;
-+      void __iomem *en_reg[MAX_WORDS];
-+      void __iomem *status_reg[MAX_WORDS];
-+      u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct intc_block block[MAX_PARENT_IRQS];
-+
-+      int num_words;
-+
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      struct intc_block *block;
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+              if (irq == data->block[idx].parent_irq)
-+                      block = &data->block[idx];
-+
-+      for (idx = 0; idx < data->num_words; idx++) {
-+              int base = idx * IRQS_PER_WORD;
-+              unsigned long pending;
-+              int hw_irq;
-+
-+              raw_spin_lock(&data->lock);
-+              pending = __raw_readl(block->en_reg[idx]) &
-+                        __raw_readl(block->status_reg[idx]);
-+              raw_spin_unlock(&data->lock);
-+
-+              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+                      int virq;
-+
-+                      virq  = irq_find_mapping(data->domain, base + hw_irq);
-+                      generic_handle_irq(virq);
-+              }
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+                                  bool enable)
-+{
-+      u32 val;
-+
-+      val = __raw_readl(block->en_reg[reg]);
-+      if (enable)
-+              val |= BIT(bit);
-+      else
-+              val &= ~BIT(bit);
-+      __raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+      unsigned int i, reg, bit;
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      unsigned int i, reg, bit;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (block->mask_cache[reg] & BIT(bit))
-+                      __bcm6345_periph_enable(block, reg, bit, true);
-+              else
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+                                     const struct cpumask *mask, bool force)
-+{
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      struct intc_data *priv = data->domain->host_data;
-+      unsigned int i, reg, bit;
-+      unsigned long flags;
-+      bool enabled;
-+      int cpu;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      /* we could route to more than one cpu, but performance
-+         suffers, so fix it to one.
-+       */
-+      cpu = cpumask_any_and(mask, cpu_online_mask);
-+      if (cpu >= nr_cpu_ids)
-+              return -EINVAL;
-+
-+      if (cpu >= MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      if (!priv->block[cpu].parent_irq)
-+              return -EINVAL;
-+
-+      raw_spin_lock_irqsave(&priv->lock, flags);
-+      enabled = !irqd_irq_masked(data);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (i == cpu) {
-+                      block->mask_cache[reg] |= BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, enabled);
-+              } else {
-+                      block->mask_cache[reg] &= ~BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+              }
-+      }
-+      raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+      return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+                            irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+      .xlate = irq_domain_xlate_onecell,
-+      .map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+                                           int num_blocks, int *irq,
-+                                           void __iomem **base, int num_words)
-+{
-+      struct intc_data *data;
-+      unsigned int i, w, status_offset;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      status_offset = num_words * sizeof(u32);
-+
-+      for (i = 0; i < num_blocks; i++) {
-+              struct intc_block *block = &data->block[i];
-+
-+              block->parent_irq = irq[i];
-+              block->base = base[i];
-+
-+              for (w = 0; w < num_words; w++) {
-+                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+                      block->en_reg[w] = base[i] + word_offset;
-+                      block->status_reg[w] = base[i] + status_offset;
-+                      block->status_reg[w] += word_offset;
-+
-+                      /* route all interrupts to line 0 by default */
-+                      if (i == 0)
-+                              block->mask_cache[w] = 0xffffffff;
-+              }
-+
-+              irq_set_handler_data(block->parent_irq, data);
-+              irq_set_chained_handler(block->parent_irq,
-+                                      bcm6345_periph_irq_handle);
-+      }
-+
-+      data->num_words = num_words;
-+
-+      data->chip.name = "bcm6345-periph-intc";
-+      data->chip.irq_mask = bcm6345_periph_irq_mask;
-+      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+      if (num_blocks > 1)
-+              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+                                           VIRQ_BASE,
-+                                           &bcm6345_periph_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -EINVAL;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+                                   void __iomem **base, int num_words)
-+{
-+      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+                                       struct device_node *parent)
-+{
-+      struct resource res;
-+      int num_irqs, ret = -EINVAL;
-+      int irqs[MAX_PARENT_IRQS] = { 0 };
-+      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+      int words = 0;
-+      int i;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              resource_size_t size;
-+
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i])
-+                      goto out_unmap;
-+
-+              if (of_address_to_resource(node, i, &res))
-+                      goto out_unmap;
-+
-+              size = resource_size(&res);
-+              switch (size) {
-+              case 8:
-+              case 16:
-+              case 32:
-+                      size = size / 8;
-+                      break;
-+              default:
-+                      goto out_unmap;
-+              }
-+
-+              if (words && words != size) {
-+                      ret = -EINVAL;
-+                      goto out_unmap;
-+              }
-+              words = size;
-+
-+              bases[i] = of_iomap(node, i);
-+              if (!bases[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+      if (!ret)
-+              return 0;
-+
-+out_unmap:
-+      for (i = 0; i < num_irqs; i++) {
-+              iounmap(bases[i]);
-+              irq_dispose_mapping(irqs[i]);
-+      }
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
-+              bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+                            int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/brcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/brcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644 (file)
index b5df035..0000000
+++ /dev/null
@@ -1,394 +0,0 @@
-From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 335 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
-+- reg: Specifies the base physical addresses and size of the registers.
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+      compatible = "brcm,bcm6345-ext-intc";
-+      interrupt-parent = <&periph_intc>;
-+      #interrupt-cells = <2>;
-+      reg = <0x10000018 0x4>;
-+      interrupt-controller;
-+      interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_EXT_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
-       bool
-       select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,301 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE             IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE             0
-+#endif
-+
-+#define MAX_IRQS              4
-+
-+#define EXTIRQ_CFG_SENSE      0
-+#define EXTIRQ_CFG_STAT               1
-+#define EXTIRQ_CFG_CLEAR      2
-+#define EXTIRQ_CFG_MASK               3
-+#define EXTIRQ_CFG_BOTHEDGE   4
-+#define EXTIRQ_CFG_LEVELSENSE 5
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+
-+      int parent_irq[MAX_IRQS];
-+      void __iomem *reg;
-+      int shift;
-+      unsigned int toggle_clear_on_ack:1;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_IRQS; idx++) {
-+              if (data->parent_irq[idx] != irq)
-+                      continue;
-+
-+              generic_handle_irq(irq_find_mapping(data->domain, idx));
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
-+                   priv->reg);
-+      if (priv->toggle_clear_on_ack)
-+              __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+                                   unsigned int flow_type)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      bool levelsense = 0, sense = 0, bothedge = 0;
-+      u32 reg;
-+
-+      flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+      if (flow_type == IRQ_TYPE_NONE)
-+              flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+      switch (flow_type) {
-+      case IRQ_TYPE_EDGE_BOTH:
-+              bothedge = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_RISING:
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_FALLING:
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_HIGH:
-+              levelsense = 1;
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_LOW:
-+              levelsense = 1;
-+              break;
-+
-+      default:
-+              pr_err("bogus flow type combination given!\n");
-+              return -EINVAL;
-+      }
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+
-+      if (levelsense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+      if (sense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
-+      if (bothedge)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+
-+      irqd_set_trigger_type(data, flow_type);
-+      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+              irq_set_handler_locked(data, handle_level_irq);
-+      else
-+              irq_set_handler_locked(data, handle_edge_irq);
-+
-+      return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+                              irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+      .xlate = irq_domain_xlate_twocell,
-+      .map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+                                        int num_irqs, int *irqs,
-+                                        void __iomem *reg, int shift,
-+                                        bool toggle_clear_on_ack)
-+{
-+      struct intc_data *data;
-+      unsigned int i;
-+      int start = VIRQ_BASE;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              data->parent_irq[i] = irqs[i];
-+
-+              irq_set_handler_data(irqs[i], data);
-+              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+      }
-+
-+      data->reg = reg;
-+      data->shift = shift;
-+      data->toggle_clear_on_ack = toggle_clear_on_ack;
-+
-+      data->chip.name = "bcm6345-ext-intc";
-+      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+      /*
-+       * If we have less than 4 irqs, this is the second controller on
-+       * bcm63xx. So increase the VIRQ start to not overlap with the first
-+       * one, but only do so if we actually use a non-zero start.
-+       *
-+       * This can be removed when bcm63xx has no legacy users anymore.
-+       */
-+      if (start && num_irqs < 4)
-+              start += 4;
-+
-+      data->domain = irq_domain_add_simple(node, num_irqs, start,
-+                                           &bcm6345_ext_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -ENOMEM;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+                                int shift)
-+{
-+      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+                                         struct device_node *parent)
-+{
-+      int num_irqs, ret = -EINVAL;
-+      unsigned i;
-+      void __iomem *base;
-+      int irqs[MAX_IRQS] = { 0 };
-+      u32 shift;
-+      bool toggle_clear_on_ack = false;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (!num_irqs || num_irqs > MAX_IRQS)
-+              return -EINVAL;
-+
-+      if (of_property_read_u32(node, "brcm,field-width", &shift))
-+              shift = 4;
-+
-+      /* on BCM6318 setting CLEAR seems to continuously mask interrupts */
-+      if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
-+              toggle_clear_on_ack = true;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      base = of_iomap(node, 0);
-+      if (!base)
-+              goto out_unmap;
-+
-+      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
-+                                    toggle_clear_on_ack);
-+      if (!ret)
-+              return 0;
-+out_unmap:
-+      iounmap(base);
-+
-+      for (i = 0; i < num_irqs; i++)
-+              irq_dispose_mapping(irqs[i]);
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/brcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/brcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644 (file)
index d04d89c..0000000
+++ /dev/null
@@ -1,695 +0,0 @@
-From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |   3 +
- arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 507 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -272,6 +272,9 @@ config BCM63XX
-       select SYNC_R4K
-       select DMA_NONCOHERENT
-       select IRQ_MIPS_CPU
-+      select BCM6345_EXT_IRQ
-+      select BCM6345_PERIPH_IRQ
-+      select IRQ_DOMAIN
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -11,7 +11,9 @@
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -19,544 +21,140 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--      if (irq < 4)
--              return ext_irq_cfg_reg1;
--      return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--      if (is_ext_irq_cascaded &&
--          intbit >= ext_irq_start && intbit <= ext_irq_end)
--              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--      else
--              do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--                                   const struct cpumask *m)
--{
--      bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--      if (m)
--              enable &= cpumask_test_cpu(cpu, m);
--      else if (irqd_affinity_was_set(d))
--              enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
--#endif
--      return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(int cpu)                             \
--{                                                                     \
--      u32 pending[width / 32];                                        \
--      unsigned int src, tgt;                                          \
--      bool irqs_pending = false;                                      \
--      static unsigned int i[2];                                       \
--      unsigned int *next = &i[cpu];                                   \
--      unsigned long flags;                                            \
--                                                                      \
--      /* read registers in reverse order */                           \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
--              u32 val;                                                \
--                                                                      \
--              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--              pending[--tgt] = val;                                   \
--                                                                      \
--              if (val)                                                \
--                      irqs_pending = true;                            \
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--                                                                      \
--      if (!irqs_pending)                                              \
--              return;                                                 \
--                                                                      \
--      while (1) {                                                     \
--              unsigned int to_call = *next;                           \
--                                                                      \
--              *next = (*next + 1) & (width - 1);                      \
--              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
--                      handle_internal(to_call);                       \
--                      break;                                          \
--              }                                                       \
--      }                                                               \
--}                                                                     \
--                                                                      \
--static void __internal_irq_mask_##width(struct irq_data *d)           \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              val &= ~(1 << bit);                                     \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}                                                                     \
--                                                                      \
--static void __internal_irq_unmask_##width(struct irq_data *d,         \
--                                        const struct cpumask *m)      \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              if (enable_irq_for_cpu(cpu, d, m))                      \
--                      val |= (1 << bit);                              \
--              else                                                    \
--                      val &= ~(1 << bit);                             \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--      u32 cause;
--
--      do {
--              cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--              if (!cause)
--                      break;
--
--              if (cause & CAUSEF_IP7)
--                      do_IRQ(7);
--              if (cause & CAUSEF_IP0)
--                      do_IRQ(0);
--              if (cause & CAUSEF_IP1)
--                      do_IRQ(1);
--              if (cause & CAUSEF_IP2)
--                      dispatch_internal(0);
--              if (is_ext_irq_cascaded) {
--                      if (cause & CAUSEF_IP3)
--                              dispatch_internal(1);
--              } else {
--                      if (cause & CAUSEF_IP3)
--                              do_IRQ(IRQ_EXT_0);
--                      if (cause & CAUSEF_IP4)
--                              do_IRQ(IRQ_EXT_1);
--                      if (cause & CAUSEF_IP5)
--                              do_IRQ(IRQ_EXT_2);
--                      if (cause & CAUSEF_IP6)
--                              do_IRQ(IRQ_EXT_3);
--              }
--      } while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--      internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--      internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--                                  NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--                                       unsigned int flow_type)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      int levelsense, sense, bothedge;
--      unsigned long flags;
--
--      flow_type &= IRQ_TYPE_SENSE_MASK;
--
--      if (flow_type == IRQ_TYPE_NONE)
--              flow_type = IRQ_TYPE_LEVEL_LOW;
--
--      levelsense = sense = bothedge = 0;
--      switch (flow_type) {
--      case IRQ_TYPE_EDGE_BOTH:
--              bothedge = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_RISING:
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_FALLING:
--              break;
--
--      case IRQ_TYPE_LEVEL_HIGH:
--              levelsense = 1;
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_LEVEL_LOW:
--              levelsense = 1;
--              break;
--
--      default:
--              pr_err("bogus flow type combination given !\n");
--              return -EINVAL;
--      }
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--      irq %= 4;
--
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6348_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              break;
--
--      case BCM3368_CPU_ID:
--      case BCM6328_CPU_ID:
--      case BCM6338_CPU_ID:
--      case BCM6345_CPU_ID:
--      case BCM6358_CPU_ID:
--      case BCM6362_CPU_ID:
--      case BCM6368_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--              break;
--      default:
--              BUG();
--      }
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      irqd_set_trigger_type(d, flow_type);
--      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--              irq_set_handler_locked(d, handle_level_irq);
--      else
--              irq_set_handler_locked(d, handle_edge_irq);
--
--      return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--                                       const struct cpumask *dest,
--                                       bool force)
--{
--      if (!irqd_irq_disabled(data))
--              internal_irq_unmask(data, dest);
--
--      return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--      .name           = "bcm63xx_ipic",
--      .irq_mask       = bcm63xx_internal_irq_mask,
--      .irq_unmask     = bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--      .name           = "bcm63xx_epic",
--      .irq_ack        = bcm63xx_external_irq_clear,
--
--      .irq_mask       = bcm63xx_external_irq_mask,
--      .irq_unmask     = bcm63xx_external_irq_unmask,
--
--      .irq_set_type   = bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip2",
--      .flags          = IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip3",
--      .flags          = IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_extirq",
--      .flags          = IRQF_NO_THREAD,
--};
--
--static void bcm63xx_init_irq(void)
-+void __init arch_init_irq(void)
- {
--      int irq_bits;
--
--      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+      void __iomem *periph_bases[2];
-+      void __iomem *ext_intc_bases[2];
-+      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+      int periph_irqs[2] = { 2, 3 };
-+      int ext_irqs[6];
-+
-+      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              periph_bases[0] += PERF_IRQMASK_3368_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6328_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+              periph_bases[0] += PERF_IRQMASK_6338_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+              periph_bases[0] += PERF_IRQMASK_6345_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+              periph_bases[0] += PERF_IRQMASK_6348_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 5;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--              irq_bits = 32;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--              irq_bits = 64;
-+              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
-               ext_irq_count = 6;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+              ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+              ext_shift = 4;
-               break;
-       default:
-               BUG();
-       }
--      if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal_32;
--              internal_irq_mask = __internal_irq_mask_32;
--              internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
--              dispatch_internal = __dispatch_internal_64;
--              internal_irq_mask = __internal_irq_mask_64;
--              internal_irq_unmask = __internal_irq_unmask_64;
--      }
--}
--
--void __init arch_init_irq(void)
--{
--      int i;
--
--      bcm63xx_init_irq();
-       mips_cpu_irq_init();
--      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--                                       handle_level_irq);
--
--      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--                                       handle_edge_irq);
--
--      if (!is_ext_irq_cascaded) {
--              for (i = 3; i < 3 + ext_irq_count; ++i)
--                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--      }
--
--      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--      if (is_ext_irq_cascaded) {
--              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--              bcm63xx_internal_irq_chip.irq_set_affinity =
--                      bcm63xx_internal_set_affinity;
--
--              cpumask_clear(irq_default_affinity);
--              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--      }
--#endif
-+      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
-+                               periph_width);
-+      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+      if (ext_irq_count > 4)
-+              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+                                    ext_shift);
- }
diff --git a/target/linux/brcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/brcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644 (file)
index e911f0e..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
-               periph_width = 1;
-               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--              ext_irq_count = 4;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+              ext_irq_count = 6;
-               ext_irqs[0] = BCM_6358_EXT_IRQ0;
-               ext_irqs[1] = BCM_6358_EXT_IRQ1;
-               ext_irqs[2] = BCM_6358_EXT_IRQ2;
-               ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6358_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -896,6 +896,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -244,6 +244,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
- /* for 6348 only */
diff --git a/target/linux/brcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644 (file)
index 07d3f9d..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- };
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+      return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
-@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_3368() \
-+      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644 (file)
index 57af836..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT                       12
-+#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
- #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/brcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/brcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644 (file)
index a05a4b3..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-       chipid_reg = 0;
-@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+              else if (varid == 3)
-+                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
-               break;
-       case BCM6338_CPU_ID:
-               bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -12,6 +12,8 @@
-  */
- #define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
-+#define BCM63281_CPU_ID               0x63281
-+#define BCM63283_CPU_ID               0x63283
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
-@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
-       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644 (file)
index 2efbf36..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6362_CPU_ID:
-               bcm63xx_regs_base = bcm6362_regs_base;
-               bcm63xx_irqs = bcm6362_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+              else if (varid == 2)
-+                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
-               break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -18,6 +18,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
-       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/brcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644 (file)
index 64bcd8f..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       case BCM6368_CPU_ID:
-+      case BCM6369_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
-+
-+              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+              bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,7 @@
- #define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-+#define BCM6369_CPU_ID                0x6369
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644 (file)
index 54900d7..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -42,7 +42,7 @@
-                                       BCM_CB_MEM_SIZE - 1)
- #define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
-                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/brcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644 (file)
index 05142a8..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,10 +41,10 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
--#define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
--                                      BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-+                                      BCM_PCIE_MEM_SIZE_6328 - 1)
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- static struct resource bcm_pcie_mem_resource = {
-       .name   = "bcm63xx PCIe memory space",
--      .start  = BCM_PCIE_MEM_BASE_PA,
--      .end    = BCM_PCIE_MEM_END_PA,
-+      .start  = 0,
-+      .end    = 0,
-       .flags  = IORESOURCE_MEM,
- };
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-       /* set bar0 to little endian */
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-       val |= BASEMASK_REMAP_EN;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-       register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      }
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644 (file)
index c38b431..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
--      u16 cpu_id = bcm63xx_get_cpu_id();
-+      u32 cpu_id = bcm63xx_get_cpu_id();
-       switch (cpu_id) {
-       case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
-       switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
-       return cpu_id;
- }
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--      const u16 cpu_id = bcm63xx_cpu_id;
-+      const u32 cpu_id = bcm63xx_cpu_id;
-       return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/brcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644 (file)
index 1809a3c..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -2,10 +2,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- #define IRQ_INTERNAL_BASE             8
--#define IRQ_EXTERNAL_BASE             100
-+#define NR_INTERNAL_IRQS              128
-+#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -2,7 +2,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 65ca976..0000000
+++ /dev/null
@@ -1,737 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+      bool "support 63268 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-+      select HW_HAS_PCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
-                       clk_disable_unlocked(&clk_swpkt_sar);
-               }
-               bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
-       } else {
-               return;
-       }
-@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-       else
-               return;
-@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
-       else
-               return;
-@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
--      else
--              /* BCMCPU_IS_6368 */
-+      else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_SPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_SPI_EN;
-+      else
-+              return;
-+
-       bcm_hwclock_set(mask, enable);
- }
-@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_HSSPI_EN;
-       else
-               return;
-@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
- };
-+static struct clk_lookup bcm63268_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM6368_CPU_ID:
-               clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
-               break;
-+      case BCM63268_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-+              clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
-+              break;
-       }
-       return 0;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- };
-+static const unsigned long bcm63268_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
-       return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
-               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
-       }
-+      case BCM63268_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+                              STRAPBUS_63268_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x3:
-+              case 0xe:
-+                      return 320000000;
-+              case 0xa:
-+                      return 333000000;
-+              case 0x2:
-+              case 0xb:
-+              case 0xf:
-+                      return 400000000;
-+              default:
-+                      return 0;
-+              }
-+      }
-       default:
-               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      bool long_chipid = false;
-       u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
-               case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
-                       break;
-+              case 0x80:
-+                      long_chipid = true;
-+                      /* fall-through */
-               default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-                       break;
-@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       }
-+
-       /*
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
--      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+      if (long_chipid) {
-+              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+      } else {
-+              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      }
-+
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
-               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-               bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-+      case BCM63168_CPU_ID:
-+      case BCM63169_CPU_ID:
-+      case BCM63268_CPU_ID:
-+      case BCM63269_CPU_ID:
-+              bcm63xx_regs_base = bcm63268_regs_base;
-+              bcm63xx_irqs = bcm63268_irqs;
-+
-+              bcm63xx_cpu_id = BCM63268_CPU_ID;
-+              break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-               break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               }
-+      case BCM63268_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       default:
-               return -EINVAL;
-       }
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
-       }
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368()) {
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
-               bcm63xx_spi_device.name = "bcm6358-spi",
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-       }
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
-               ext_irqs[5] = BCM_6368_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-+      case BCM63268_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+              ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+              ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+              ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+              ext_shift = 4;
-+              break;
-       default:
-               BUG();
-       }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -126,6 +126,20 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET   0
-+#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL    0
-+#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY   0
-+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI    0
-+#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
-+                               SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6368)
- };
-+static const u32 bcm63268_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
-@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-+      } else if (BCMCPU_IS_63268()) {
-+              reset_reg = PERF_SOFTRESET_63268_REG;
-+              bcm63xx_reset_bits = bcm63268_reset_bits;
-       }
-       return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -22,6 +22,10 @@
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- #define BCM6369_CPU_ID                0x6369
-+#define BCM63168_CPU_ID               0x63168
-+#define BCM63169_CPU_ID               0x63169
-+#define BCM63268_CPU_ID               0x63268
-+#define BCM63269_CPU_ID               0x63269
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
-               case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+              case BCM63268_CPU_ID:
-+#endif
-               break;
-       default:
-               unreachable();
-@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
-       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -574,6 +591,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE             (0xb0004180)
- #define BCM_6368_MISC_BASE            (0xdeadbeef)
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
-+#define BCM_63268_PERF_BASE           (0xb0000000)
-+#define BCM_63268_TIMER_BASE          (0xb0000080)
-+#define BCM_63268_WDT_BASE            (0xb000009c)
-+#define BCM_63268_UART0_BASE          (0xb0000180)
-+#define BCM_63268_UART1_BASE          (0xb00001a0)
-+#define BCM_63268_GPIO_BASE           (0xb00000c0)
-+#define BCM_63268_SPI_BASE            (0xb0000800)
-+#define BCM_63268_HSSPI_BASE          (0xb0001000)
-+#define BCM_63268_UDC0_BASE           (0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE         (0xb000c800)
-+#define BCM_63268_OHCI0_BASE          (0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
-+#define BCM_63268_USBD_BASE           (0xb0002400)
-+#define BCM_63268_MPI_BASE            (0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
-+#define BCM_63268_PCIE_BASE           (0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
-+#define BCM_63268_DSL_BASE            (0xdeadbeef)
-+#define BCM_63268_UBUS_BASE           (0xdeadbeef)
-+#define BCM_63268_ENET0_BASE          (0xdeadbeef)
-+#define BCM_63268_ENET1_BASE          (0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE                (0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
-+#define BCM_63268_ENETSW_BASE         (0xb0700000)
-+#define BCM_63268_EHCI0_BASE          (0xb0002500)
-+#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
-+#define BCM_63268_MEMC_BASE           (0xdeadbeef)
-+#define BCM_63268_DDR_BASE            (0xb0003000)
-+#define BCM_63268_M2M_BASE            (0xdeadbeef)
-+#define BCM_63268_ATM_BASE            (0xdeadbeef)
-+#define BCM_63268_XTM_BASE            (0xb0007000)
-+#define BCM_63268_XTMDMA_BASE         (0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_PCM_BASE            (0xb000b000)
-+#define BCM_63268_PCMDMA_BASE         (0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_RNG_BASE            (0xdeadbeef)
-+#define BCM_63268_MISC_BASE           (0xb0001800)
- extern const unsigned long *bcm63xx_regs_base;
-@@ -1042,6 +1105,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ            0
-+#define BCM_63268_ENET0_IRQ           0
-+#define BCM_63268_ENET1_IRQ           0
-+#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ          0
-+#define BCM_63268_ENET0_RXDMA_IRQ     0
-+#define BCM_63268_ENET0_TXDMA_IRQ     0
-+#define BCM_63268_ENET1_RXDMA_IRQ     0
-+#define BCM_63268_ENET1_TXDMA_IRQ     0
-+#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ             0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
-               return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-+      case BCM63268_CPU_ID:
-+              return 52;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT         12
-+#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT                       12
- #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
-@@ -212,6 +214,52 @@
-                                       CKCTL_6368_NAND_EN |            \
-                                       CKCTL_6368_IPSEC_EN)
-+#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
-+#define CKCTL_63268_VDSL_EN           (1 << 3)
-+#define CKCTL_63268_MIPS_EN           (1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
-+#define CKCTL_63268_DECT_EN           (1 << 6)
-+#define CKCTL_63268_FAP0_EN           (1 << 7)
-+#define CKCTL_63268_FAP1_EN           (1 << 8)
-+#define CKCTL_63268_SAR_EN            (1 << 9)
-+#define CKCTL_63268_ROBOSW_EN         (1 << 10)
-+#define CKCTL_63268_PCM_EN            (1 << 11)
-+#define CKCTL_63268_USBD_EN           (1 << 12)
-+#define CKCTL_63268_USBH_EN           (1 << 13)
-+#define CKCTL_63268_IPSEC_EN          (1 << 14)
-+#define CKCTL_63268_SPI_EN            (1 << 15)
-+#define CKCTL_63268_HSSPI_EN          (1 << 16)
-+#define CKCTL_63268_PCIE_EN           (1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
-+#define CKCTL_63268_GMAC_EN           (1 << 19)
-+#define CKCTL_63268_NAND_EN           (1 << 20)
-+#define CKCTL_63268_TBUS_EN           (1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
-+                                      CKCTL_63268_VDSL_AFE_EN |       \
-+                                      CKCTL_63268_VDSL_EN |           \
-+                                      CKCTL_63268_WLAN_OCP_EN |       \
-+                                      CKCTL_63268_DECT_EN |           \
-+                                      CKCTL_63268_FAP0_EN |           \
-+                                      CKCTL_63268_FAP1_EN |           \
-+                                      CKCTL_63268_SAR_EN |            \
-+                                      CKCTL_63268_ROBOSW_EN |         \
-+                                      CKCTL_63268_PCM_EN |            \
-+                                      CKCTL_63268_USBD_EN |           \
-+                                      CKCTL_63268_USBH_EN |           \
-+                                      CKCTL_63268_IPSEC_EN |          \
-+                                      CKCTL_63268_SPI_EN |            \
-+                                      CKCTL_63268_HSSPI_EN |          \
-+                                      CKCTL_63268_PCIE_EN |           \
-+                                      CKCTL_63268_PHYMIPS_EN |        \
-+                                      CKCTL_63268_GMAC_EN |           \
-+                                      CKCTL_63268_NAND_EN |           \
-+                                      CKCTL_63268_TBUS_EN |           \
-+                                      CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
-@@ -225,6 +273,7 @@
- #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-@@ -235,6 +284,7 @@
- #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-@@ -245,6 +295,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG_63268     0x18
- #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -275,6 +326,7 @@
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
-+#define PERF_SOFTRESET_63268_REG      0x10
- #define SOFTRESET_3368_SPI_MASK               (1 << 0)
- #define SOFTRESET_3368_ENET_MASK      (1 << 2)
-@@ -368,6 +420,26 @@
- #define SOFTRESET_6368_USBH_MASK      (1 << 12)
- #define SOFTRESET_6368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_63268_SPI_MASK      (1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
-+#define SOFTRESET_63268_SAR_MASK      (1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
-+#define SOFTRESET_63268_USBS_MASK     (1 << 5)
-+#define SOFTRESET_63268_USBH_MASK     (1 << 6)
-+#define SOFTRESET_63268_PCM_MASK      (1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
-+#define SOFTRESET_63268_DECT_MASK     (1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG           0x34
- #define MIPSPLLCTL_N1_SHIFT           20
-@@ -1367,6 +1439,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+#define MISC_STRAPBUS_63268_REG               0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT     21
-+#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
-               break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,7 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+              BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -284,7 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -305,6 +307,8 @@ bcm63xx_enetsw_register(const struct bcm
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      else if (BCMCPU_IS_63268())
-+              enetsw_pd.num_ports = ENETSW_PORTS_63268;
-       enetsw_pd.dma_has_sram = true;
-       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT       8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/brcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644 (file)
index e9f9e2b..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -137,7 +137,8 @@
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
- #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK)
-+                               SOFTRESET_63268_PCIE_CORE_MASK | \
-+                               SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -46,6 +46,11 @@
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-                                       BCM_PCIE_MEM_SIZE_6328 - 1)
-+#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
-+                                      BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
-       }
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 1b2cbfb..0000000
+++ /dev/null
@@ -1,697 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -19,6 +19,11 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_6318
-+      bool "support 6318 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
- {
-       u32 mask;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318())
-+              mask = CKCTL_6318_HSSPI_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
-+static struct clk_lookup bcm6318_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbh),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- static struct clk_lookup bcm6328_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "pcie", &clk_pcie),
- };
-+#define HSSPI_PLL_HZ_6318     250000000
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM3368_CPU_ID:
-               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-               break;
-+      case BCM6318_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
-+              clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
-               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
-       __GEN_CPU_IRQ_TABLE(3368)
- };
-+static const unsigned long bcm6318_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
-       return bcm63xx_memory_size;
- }
-+#define STRAP_OVERRIDE_BUS_REG                0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
-       u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
-       case BCM3368_CPU_ID:
-               return 300000000;
-+      case BCM6318_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+              pr_info("strap_override_bus = %08x\n", tmp);
-+
-+              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+              switch (mips_pll_fcvo) {
-+              case 0:
-+                      return 166000000;
-+              case 1:
-+                      return 400000000;
-+              case 2:
-+                      return 250000000;
-+              case 3:
-+                      return 333000000;
-+              };
-+      }
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
-+      if (BCMCPU_IS_6318()) {
-+              val = bcm_sdram_readl(SDRAM_CFG_REG);
-+              val = val & SDRAM_CFG_6318_SPACE_MASK;
-+              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+              return 1 << (val + 20);
-+      }
-+
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
-       switch (current_cpu_type()) {
-       case CPU_BMIPS3300:
-+              if ((read_c0_prid() & 0xff) >= 0x33) {
-+                      /* BCM6318 */
-+                      chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-+
-               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
-               /* fall-through */
-@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-+      case BCM6318_CPU_ID:
-+              bcm63xx_regs_base = bcm6318_regs_base;
-+              bcm63xx_irqs = bcm6318_irqs;
-+              break;
-       case BCM3368_CPU_ID:
-               bcm63xx_regs_base = bcm3368_regs_base;
-               bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
-       u32 val;
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              /* only support serial flash */
-+              return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
-               ext_irqs[3] = BCM_3368_EXT_IRQ3;
-               ext_shift = 4;
-               break;
-+      case BCM6318_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_6318_REG;
-+              periph_irq_count = 1;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+              ext_shift = 4;
-+              break;
-       case BCM6328_CPU_ID:
-               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -68,7 +68,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -44,6 +44,23 @@
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+
-+#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET    0
-+#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL     0
-+#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM     0
-+#define BCM6318_RESET_MPI     0
-+#define BCM6318_RESET_PCIE    \
-+                              (SOFTRESET_6318_PCIE_MASK |             \
-+                               SOFTRESET_6318_PCIE_CORE_MASK |        \
-+                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
- #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
-@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(3368)
- };
-+static const u32 bcm6318_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6328)
- };
-@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
-       if (BCMCPU_IS_3368()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm3368_reset_bits;
-+      } else if (BCMCPU_IS_6318()) {
-+              reset_reg = PERF_SOFTRESET_6318_REG;
-+              bcm63xx_reset_bits = bcm6318_reset_bits;
-       } else if (BCMCPU_IS_6328()) {
-               reset_reg = PERF_SOFTRESET_6328_REG;
-               bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM3368_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
-               bcm6348_a1_reboot();
-       pr_info("triggering watchdog soft-reset...\n");
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
-               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-       } else {
-               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID                0x3368
-+#define BCM6318_CPU_ID                0x6318
- #define BCM6328_CPU_ID                0x6328
- #define BCM63281_CPU_ID               0x63281
- #define BCM63283_CPU_ID               0x63283
-@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
-               case BCM3368_CPU_ID:
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+              case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
-               case BCM6328_CPU_ID:
- #endif
-@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
-       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE            (0xdeadbeef)
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6318_PERF_BASE            (0xb0000000)
-+#define BCM_6318_TIMER_BASE           (0xb0000040)
-+#define BCM_6318_WDT_BASE             (0xb0000068)
-+#define BCM_6318_UART0_BASE           (0xb0000100)
-+#define BCM_6318_UART1_BASE           (0xdeadbeef)
-+#define BCM_6318_GPIO_BASE            (0xb0000080)
-+#define BCM_6318_SPI_BASE             (0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE           (0xb0003000)
-+#define BCM_6318_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE          (0xb0006800)
-+#define BCM_6318_OHCI0_BASE           (0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
-+#define BCM_6318_USBD_BASE            (0xb0006000)
-+#define BCM_6318_MPI_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCIE_BASE            (0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6318_DSL_BASE             (0xdeadbeef)
-+#define BCM_6318_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6318_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6318_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE         (0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
-+#define BCM_6318_ENETSW_BASE          (0xb0080000)
-+#define BCM_6318_EHCI0_BASE           (0xb0005000)
-+#define BCM_6318_SDRAM_BASE           (0xb0004000)
-+#define BCM_6318_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6318_DDR_BASE             (0xdeadbeef)
-+#define BCM_6318_M2M_BASE             (0xdeadbeef)
-+#define BCM_6318_ATM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE          (0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_PCM_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_RNG_BASE             (0xdeadbeef)
-+#define BCM_6318_MISC_BASE            (0xb0000280)
-+#define BCM_6318_OTP_BASE             (0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE           (0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -775,6 +833,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ              0
-+#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ            0
-+#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ             0
-+#define BCM_6318_ENET0_IRQ            0
-+#define BCM_6318_ENET1_IRQ            0
-+#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ           0
-+#define BCM_6318_ENET0_RXDMA_IRQ      0
-+#define BCM_6318_ENET0_TXDMA_IRQ      0
-+#define BCM_6318_ENET1_RXDMA_IRQ      0
-+#define BCM_6318_ENET1_TXDMA_IRQ      0
-+#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ              0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -53,6 +53,39 @@
-                                        CKCTL_3368_EMUSB_EN | \
-                                        CKCTL_3368_USBU_EN)
-+#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
-+#define CKCTL_6318_USB_ASB_EN         (1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
-+#define CKCTL_6318_ADSL_EN            (1 << 11)
-+#define CKCTL_6318_SAR125_EN          (1 << 12)
-+#define CKCTL_6318_MIPS_EN            (1 << 13)
-+#define CKCTL_6318_PCIE_EN            (1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
-+#define CKCTL_6318_SDR_EN             (1 << 19)
-+#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN           (1 << 25)
-+#define CKCTL_6318_PCIE25_EN          (1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
-+                                      CKCTL_6318_ADSL_QPROC_EN |      \
-+                                      CKCTL_6318_ADSL_AFE_EN |        \
-+                                      CKCTL_6318_ADSL_EN |            \
-+                                      CKCTL_6318_SAR_EN  |            \
-+                                      CKCTL_6318_USB_EN |             \
-+                                      CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -260,12 +293,27 @@
-                                       CKCTL_63268_TBUS_EN |           \
-                                       CKCTL_63268_ROBOSW250_EN)
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG             0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
-+#define UB_CKCTL_6318_ARB_EN          (1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
-+#define UB_CKCTL_6318_SAR_EN          (1 << 7)
-+#define UB_CKCTL_6318_SDR_EN          (1 << 8)
-+#define UB_CKCTL_6318_USB_EN          (1 << 9)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
-+#define PERF_IRQMASK_6318_REG         0x20
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -277,6 +325,7 @@
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-+#define PERF_IRQSTAT_6318_REG         0x30
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -288,6 +337,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-+#define PERF_EXTIRQ_CFG_REG_6318      0x18
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -322,6 +372,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG            0x28
-+#define PERF_SOFTRESET_6318_REG               0x10
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
-@@ -335,6 +386,18 @@
- #define SOFTRESET_3368_USBS_MASK      (1 << 11)
- #define SOFTRESET_3368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_6318_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
-+#define SOFTRESET_6318_SAR_MASK               (1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
-+#define SOFTRESET_6318_USBS_MASK      (1 << 4)
-+#define SOFTRESET_6318_USBH_MASK      (1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
- #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
- #define SOFTRESET_6328_SAR_MASK               (1 << 2)
-@@ -506,8 +569,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
-+#define TIMER_IRQMASK_6318_REG                0x0
-+#define TIMER_IRQSTAT_6318_REG                0x4
-+#define IRQSTATMASK_TIMER0            (1 << 0)
-+#define IRQSTATMASK_TIMER1            (1 << 1)
-+#define IRQSTATMASK_TIMER2            (1 << 2)
-+#define IRQSTATMASK_TIMER3            (1 << 3)
-+#define IRQSTATMASK_WDT                       (1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
- #define TIMER_CTL0_REG                        0x4
- #define TIMER_CTL1_REG                        0x8
- #define TIMER_CTL2_REG                        0xC
-@@ -1254,6 +1326,8 @@
- #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT          13
- #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT    4
-+#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- #define SDRAM_MBASE_REG                       0xc
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
-               if (offset >= 0xfff00000)
-                       return 1;
-               break;
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
-               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
-       int i;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-               return 0;
-       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,8 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--              BCMCPU_IS_63268())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -285,8 +285,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--              !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -303,7 +303,7 @@ bcm63xx_enetsw_register(const struct bcm
-       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              return 50;
-       case BCM6328_CPU_ID:
-               return 32;
-       case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644 (file)
index e359311..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -29,7 +29,9 @@
-       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
-       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
-       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
--      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
-+      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
-+      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
-+      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
- #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
-@@ -43,6 +45,8 @@
- #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+#define BCM3368_RESET_PCIE_CORE       0
-+#define BCM3368_RESET_PCIE_HARD       0
- #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-@@ -55,11 +59,10 @@
- #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM     0
- #define BCM6318_RESET_MPI     0
--#define BCM6318_RESET_PCIE    \
--                              (SOFTRESET_6318_PCIE_MASK |             \
--                               SOFTRESET_6318_PCIE_CORE_MASK |        \
--                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
-@@ -71,11 +74,10 @@
- #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI     0
--#define BCM6328_RESET_PCIE    \
--                              (SOFTRESET_6328_PCIE_MASK |             \
--                               SOFTRESET_6328_PCIE_CORE_MASK |        \
--                               SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
- #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
-@@ -89,6 +91,8 @@
- #define BCM6338_RESET_MPI     0
- #define BCM6338_RESET_PCIE    0
- #define BCM6338_RESET_PCIE_EXT        0
-+#define BCM6338_RESET_PCIE_CORE       0
-+#define BCM6338_RESET_PCIE_HARD       0
- #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
-@@ -102,6 +106,8 @@
- #define BCM6348_RESET_MPI     0
- #define BCM6348_RESET_PCIE    0
- #define BCM6348_RESET_PCIE_EXT        0
-+#define BCM6348_RESET_PCIE_CORE       0
-+#define BCM6348_RESET_PCIE_HARD       0
- #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
-@@ -115,6 +121,8 @@
- #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6358_RESET_PCIE_CORE       0
-+#define BCM6358_RESET_PCIE_HARD       0
- #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET    0
-@@ -126,9 +134,10 @@
- #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI     0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD       0
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
-@@ -142,6 +151,8 @@
- #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM6368_RESET_PCIE_CORE       0
-+#define BCM6368_RESET_PCIE_HARD       0
- #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET   0
-@@ -153,10 +164,10 @@
- #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
--#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK | \
--                               SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
-       BCM63XX_RESET_MPI,
-       BCM63XX_RESET_PCIE,
-       BCM63XX_RESET_PCIE_EXT,
-+      BCM63XX_RESET_PCIE_CORE,
-+      BCM63XX_RESET_PCIE_HARD,
- };
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+              mdelay(10);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+      }
-       mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-       mdelay(10);
diff --git a/target/linux/brcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 3d9835d..0000000
+++ /dev/null
@@ -1,333 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+      u32 reg;
-+
-+      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+      if (enable)
-+              reg |= mask;
-+      else
-+              reg &= ~mask;
-+      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+      }
- }
- static struct clk clk_pcie = {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,6 +41,12 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
-+                                      BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1530,6 +1530,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
-+#define PCIE_SPECIFIC_REG             0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
-+
- #define PCIE_CONFIG2_REG              0x408
- #define CONFIG2_BAR1_SIZE_EN          1
- #define CONFIG2_BAR1_SIZE_MASK                0xf
-@@ -1575,7 +1586,54 @@
- #define PCIE_RC_INT_C                 (1 << 2)
- #define PCIE_RC_INT_D                 (1 << 3)
--#define PCIE_DEVICE_OFFSET            0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB      0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT     20
-+#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT      4
-+#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
-+#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN      1
-+
-+#define PCIE_HARD_DEBUG_REG           0x4204
-+#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
-+#define CPU_INT_PCIE_INTA             (1 << 1)
-+#define CPU_INT_PCIE_INTB             (1 << 2)
-+#define CPU_INT_PCIE_INTC             (1 << 3)
-+#define CPU_INT_PCIE_INTD             (1 << 4)
-+#define CPU_INT_PCIE_INTR             (1 << 5)
-+#define CPU_INT_PCIE_NMI              (1 << 6)
-+#define CPU_INT_PCIE_UBUS             (1 << 7)
-+#define CPU_INT_IPI                   (1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG                0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT                12
-+#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT         15
-+#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT         20
-+#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318               0x9000
-+#define PCIE_DEVICE_OFFSET_6328               0x8000
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
-@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- void __iomem *pci_iospace_start;
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
-       u32 val;
-       u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
-       mdelay(200);
- }
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
-       u32 val;
--      /* enable clock */
--      pcie_clk = clk_get(NULL, "pcie");
--      if (IS_ERR_OR_NULL(pcie_clk))
--              return -ENODEV;
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
--      clk_prepare_enable(pcie_clk);
-+      /* reset the PCIe core */
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+      mdelay(10);
-+      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+      val &= ~HARD_DEBUG_SERDES_IDDQ;
-+      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+      mdelay(200);
-+}
--      bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+      u32 val;
-       /* configure the PCIe bridge */
-       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
-       val |= OPT2_CFG_TYPE1_BD_SEL;
-       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+      /* set bar0 to little endian */
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+      val |= BASEMASK_REMAP_EN;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+      u32 val;
-+
-+      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+                      PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+             C2P_BASELIMIT_BASE_SHIFT;
-+
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+      /* set bar0 to little endian */
-+      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+                      PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+      u32 val;
-+
-+      /* enable clock */
-+      pcie_clk = clk_get(NULL, "pcie");
-+      if (IS_ERR_OR_NULL(pcie_clk))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(pcie_clk);
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+              bcm63xx_reset_pcie_gen1();
-+              bcm63xx_init_pcie_gen1();
-+      } else {
-+              bcm63xx_reset_pcie_gen2();
-+              bcm63xx_init_pcie_gen2();
-+      }
-+
-       /* setup class code as bridge */
-       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-       val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
-       val &= ~CONFIG2_BAR1_SIZE_MASK;
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
--      /* set bar0 to little endian */
--      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--      val |= BASEMASK_REMAP_EN;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
-       register_pci_controller(&bcm63xx_pcie_controller);
-       return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-       } else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
-       }
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644 (file)
index 298fffd..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+void __init bcm63xx_flash_detect(void)
-+{
-+      flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -17,6 +17,7 @@
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_flash.h>
- void __init prom_init(void)
- {
-@@ -52,6 +53,9 @@ void __init prom_init(void)
-       reg &= ~mask;
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
-+      /* detect and setup flash access */
-+      bcm63xx_flash_detect();
-+
-       /* do low level board init */
-       board_prom_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -8,6 +8,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644 (file)
index 329a156..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,6 +16,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/spi-nor.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+#define HSSPI_FLASH_CTRL_REG          0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK   0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
-+#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
-+#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
-+#define FLASH_CTRL_MB_EN              (1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
-       flash_type = bcm63xx_detect_flash_type();
-+
-+      /* ensure flash mapping has sane values */
-+      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+           BCMCPU_IS_63268())) {
-+              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+              if (val & FLASH_CTRL_MB_EN) {
-+                      /* cfe might configure non working dual-io mode */
-+                      val &= ~FLASH_CTRL_MB_EN;
-+                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+
-+                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+                      case FLASH_CTRL_ADDR_BYTES_3:
-+                              val |= SPINOR_OP_READ_FAST;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_4:
-+                              val |= SPINOR_OP_READ_FAST_4B;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_2:
-+                      default:
-+                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
-+                              return;
-+                      }
-+              } else {
-+                      /* ensure dummy bytes is set to 1 for _FAST reads */
-+                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
-+
-+                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
-+                              return;
-+
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+              }
-+
-+              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+      }
- }
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644 (file)
index a8eea5b..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+                              CKCTL_6318_ROBOSW025_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-       } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--      else if (BCMCPU_IS_6348())
-+      } else if (BCMCPU_IS_6348()) {
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--      else if (BCMCPU_IS_6368())
-+      } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--      else
-+      } else {
-               return;
-+      }
-       if (enable)
-               msleep(100);
diff --git a/target/linux/brcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644 (file)
index 92c37c1..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -682,6 +682,12 @@
- #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
-+#define GPIO_PINMUX_SEL0_6318         0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- #define GPIO_PINMUX_OTHR_REG          0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1000,6 +1006,7 @@
- #define USBH_PRIV_SWAP_6358_REG               0x0
- #define USBH_PRIV_SWAP_6368_REG               0x1c
-+#define USBH_PRIV_SWAP_6318_REG               0x0c
- #define USBH_PRIV_SWAP_USBD_SHIFT     6
- #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1025,6 +1032,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
-+
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+      }
-+#endif
- }
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
-       bool "support 6318 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644 (file)
index cdff8d5..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -587,6 +587,9 @@
- #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
- #define TIMER_CTL_ENABLE_MASK         (1 << 31)
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG         0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1534,6 +1537,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT     21
- #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+#define MISC_IDDQ_CTRL_6328_REG               0x48
-+#define MISC_IDDQ_CTRL_63268_REG      0x4c
-+
-+#define IDDQ_CTRL_63268_USBH          (1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
-       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+      u32 offset;
-+      u32 reg;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+              offset = MISC_IDDQ_CTRL_6328_REG;
-+      else if (BCMCPU_IS_63268())
-+              offset = MISC_IDDQ_CTRL_63268_REG;
-+      else
-+              return;
-+
-+      reg = bcm_misc_readl(offset);
-+      if (enable)
-+              reg &= ~mask;
-+      else
-+              reg |= mask;
-+      bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
-       } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-       } else if (BCMCPU_IS_63268()) {
-+              u32 reg;
-+
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+              if (enable)
-+                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+              else
-+                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
-       } else {
-               return;
-       }
diff --git a/target/linux/brcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644 (file)
index 41f48b9..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1034,11 +1034,18 @@
- #define USBH_PRIV_SETUP_6368_REG      0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT     5
-+#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
- #define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644 (file)
index 35c2ef6..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -40,6 +40,7 @@ struct board_info {
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
-+      unsigned int num_usbh_ports:2;
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
-  */
- int __init board_register_devices(void)
- {
-+      int usbh_ports = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -186,14 +188,21 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-+      if ((board.has_ohci0 || board.has_ehci0)) {
-+              usbh_ports = board.num_usbh_ports;
-+
-+              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+                      usbh_ports = 1;
-+      }
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-       if (board.has_ehci0)
--              bcm63xx_ehci_register();
-+              bcm63xx_ehci_register(usbh_ports);
-       if (board.has_ohci0)
--              bcm63xx_ohci_register();
-+              bcm63xx_ohci_register(usbh_ports);
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
-       },
- };
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-+      bcm63xx_ehci_pdata.num_ports = num_ports;       
-+
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-       ehci_resources[0].end = ehci_resources[0].start;
-       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-       .no_big_frame_no        = 1,
--      .num_ports              = 1,
-       .power_on               = bcm63xx_ohci_power_on,
-       .power_off              = bcm63xx_ohci_power_off,
-       .power_suspend          = bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
-       },
- };
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
-       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-               return -ENODEV;
-+      bcm63xx_ohci_pdata.num_ports = num_ports;
-+
-       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-       ohci_resources[0].end = ohci_resources[0].start;
-       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-4.14/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-4.14/351-set-board-usbh-ports.patch
deleted file mode 100644 (file)
index 531adc9..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -576,6 +576,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-       .leds = {
-               {
diff --git a/target/linux/brcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/brcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644 (file)
index 37d3ff7..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,12 +1,11 @@
- # SPDX-License-Identifier: GPL-2.0
--choice
--      prompt "Board support"
-+menu "Board support"
-       depends on BCM63XX
--      default BOARD_BCM963XX
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      default y
-        help
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -686,7 +686,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
-       unsigned int i;
-       u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -13,6 +13,8 @@
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -30,6 +32,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #define PFX   "board: "
- static struct board_info board;
-@@ -80,6 +84,15 @@ const char *board_get_name(void)
-       return board.name;
- }
-+void __init board_prom_init(void)
-+{
-+      /* detect bootloader */
-+      if (fw_arg3 == CFE_EPTSEAL)
-+              board_bcm963xx_init();
-+      else
-+              panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/brcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644 (file)
index 846f0b8..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
-       },
- };
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+      mtd_resources[0].start = start;
-+      mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
--              /* read base address of boot chip select (0) */
--              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--              val &= MPI_CSBASE_BASE_MASK;
--              mtd_resources[0].start = val;
--              mtd_resources[0].end = 0x1FFFFFFF;
-+              if (!mtd_resources[0].start) {
-+                      /* read base address of boot chip select (0) */
-+                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+                      val &= MPI_CSBASE_BASE_MASK;
-+
-+                      mtd_resources[0].start = val;
-+                      mtd_resources[0].end = 0x1FFFFFFF;
-+              }
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -10,6 +10,8 @@ enum {
- void bcm63xx_flash_detect(void);
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/brcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644 (file)
index 886fb2d..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-+                 sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -39,44 +39,6 @@
- static struct board_info board;
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -220,15 +183,10 @@ int __init board_register_devices(void)
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err(PFX "failed to register fallback SPROM\n");
--      }
--#endif
-+
-+      if (board_get_mac_address(mac) ||
-+          bcm63xx_register_fallback_sprom(mac))
-+              pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+{
-+      int ret = 0;
-+
-+#ifdef CONFIG_SSB_PCIHOST
-+      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#endif
-+      return ret;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FALLBACK_SPROM
-+#define __BCM63XX_FALLBACK_SPROM
-+
-+int bcm63xx_register_fallback_sprom(u8 *mac);
-+
-+#endif
diff --git a/target/linux/brcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/brcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644 (file)
index d0e37ef..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
- arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
--      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -184,8 +183,8 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(mac) ||
--          bcm63xx_register_fallback_sprom(mac))
-+      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
--      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+      u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -7,6 +7,7 @@
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-+#include <bcm63xx_fallback_sprom.h>
- /*
-  * flash mapping
-@@ -50,6 +51,9 @@ struct board_info {
-       /* External PHY reset GPIO flags from gpio.h */
-       unsigned long ephy_reset_gpio_flags;
-+
-+      /* fallback sprom config */
-+      struct fallback_sprom_data fallback_sprom;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/brcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
deleted file mode 100644 (file)
index f540eab..0000000
+++ /dev/null
@@ -1,140 +0,0 @@
-From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:52:56 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
-
-Some devices do not provide enough mac addresses to populate wifi in
-addition to ethernet.
-
-Use having pci enabled as a rough heuristic which boards should have it
-enabled.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
- arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -70,6 +70,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-+      .use_fallback_sprom             = 1,
-       .usbd = {
-               .use_fullspeed          = 0,
-@@ -219,6 +220,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -264,6 +266,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -316,6 +319,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -370,6 +374,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -420,6 +425,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -443,6 +449,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -461,6 +468,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-       .has_enet0                      = 1,
-@@ -483,6 +491,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -509,6 +518,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -561,6 +571,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -632,6 +643,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -183,8 +183,9 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
--          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-+      if (board.use_fallback_sprom &&
-+          (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+           bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -33,6 +33,7 @@ struct board_info {
-       unsigned int    has_usbd:1;
-       unsigned int    has_uart0:1;
-       unsigned int    has_uart1:1;
-+      unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/brcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
deleted file mode 100644 (file)
index 0c4a9be..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:58:38 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
-
-Different chips require different sprom contents, so prepare for
-supplying the appropriate sprom type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -22,7 +22,7 @@
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-       .country_code           = 0x0,
-@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
-       .boardflags_hi          = 0x0000,
- };
-+static struct ssb_sprom bcm63xx_sprom;
-+
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      switch (data->type) {
-+      case SPROM_DEFAULT:
-+              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_sprom));
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -3,8 +3,13 @@
- #include <linux/if_ether.h>
-+enum sprom_type {
-+      SPROM_DEFAULT, /* default fallback sprom */
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-+      enum sprom_type type;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/brcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
deleted file mode 100644 (file)
index 42502eb..0000000
+++ /dev/null
@@ -1,517 +0,0 @@
-From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:16:36 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
-
-Allow using raw sprom content as templates.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 482 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+
-+/* FIXME: use lib_sprom after submission upstream */
-+
-+/* Get the word-offset for a SSB_SPROM_XXX define. */
-+#define SPOFF(offset) ((offset) / sizeof(u16))
-+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-+#define SPEX16(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+                         in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+      SPEX16(_outvar, _offset, _mask, _shift)
-+
-+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)   \
-+      do {    \
-+              SPEX(_field[0], _offset +  0, _mask, _shift);   \
-+              SPEX(_field[1], _offset +  2, _mask, _shift);   \
-+              SPEX(_field[2], _offset +  4, _mask, _shift);   \
-+              SPEX(_field[3], _offset +  6, _mask, _shift);   \
-+              SPEX(_field[4], _offset +  8, _mask, _shift);   \
-+              SPEX(_field[5], _offset + 10, _mask, _shift);   \
-+              SPEX(_field[6], _offset + 12, _mask, _shift);   \
-+              SPEX(_field[7], _offset + 14, _mask, _shift);   \
-+      } while (0)
-+
-+
-+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
-+                             u16 mask, u16 shift)
-+{
-+      u16 v;
-+      u8 gain;
-+
-+      v = in[SPOFF(SSB_SPROM1_AGAIN)];
-+      gain = (v & mask) >> shift;
-+      if (gain == 0xFF)
-+              gain = 2; /* If unset use 2dBm */
-+      if (sprom_revision == 1) {
-+              /* Convert to Q5.2 */
-+              gain <<= 2;
-+      } else {
-+              /* Q5.2 Fractional part is stored in 0xC0 */
-+              gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
-+      }
-+
-+      return (s8)gain;
-+}
-+
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+      SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+      SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+      SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+      SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+           SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
-+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 loc[3];
-+
-+      if (out->revision == 3)                 /* rev 3 moved MAC */
-+              loc[0] = SSB_SPROM3_IL0MAC;
-+      else {
-+              loc[0] = SSB_SPROM1_IL0MAC;
-+              loc[1] = SSB_SPROM1_ET0MAC;
-+              loc[2] = SSB_SPROM1_ET1MAC;
-+      }
-+
-+      SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-+           SSB_SPROM1_ETHPHY_ET1A_SHIFT);
-+      SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
-+      SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
-+      SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 1)
-+              SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-+                   SSB_SPROM1_BINF_CCODE_SHIFT);
-+      SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
-+           SSB_SPROM1_BINF_ANTA_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-+           SSB_SPROM1_BINF_ANTBG_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
-+      SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
-+           SSB_SPROM1_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
-+           SSB_SPROM1_GPIOB_P3_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
-+           SSB_SPROM1_MAXPWR_A_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
-+      SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
-+           SSB_SPROM1_ITSSI_A_SHIFT);
-+      SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
-+      SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-+
-+      SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-+
-+      /* Extract the antenna gain values. */
-+      out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_BG,
-+                                                  SSB_SPROM1_AGAIN_BG_SHIFT);
-+      out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_A,
-+                                                  SSB_SPROM1_AGAIN_A_SHIFT);
-+      if (out->revision >= 2)
-+              sprom_extract_r23(out, in);
-+}
-+
-+/* Revs 4 5 and 8 have partially shared layout */
-+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
-+      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
-+      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
-+      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
-+
-+      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
-+      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
-+      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
-+      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
-+
-+      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
-+      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
-+      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
-+      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
-+
-+      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
-+      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
-+      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
-+      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 il0mac_offset;
-+
-+      if (out->revision == 4)
-+              il0mac_offset = SSB_SPROM4_IL0MAC;
-+      else
-+              il0mac_offset = SSB_SPROM5_IL0MAC;
-+
-+      SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
-+           SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-+      SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 4) {
-+              SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
-+      } else {
-+              SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
-+      }
-+      SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
-+           SSB_SPROM4_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-+           SSB_SPROM4_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
-+           SSB_SPROM4_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
-+           SSB_SPROM4_ITSSI_A_SHIFT);
-+      if (out->revision == 4) {
-+              SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+                   SSB_SPROM4_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+                   SSB_SPROM4_GPIOB_P3_SHIFT);
-+      } else {
-+              SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+                   SSB_SPROM5_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+                   SSB_SPROM5_GPIOB_P3_SHIFT);
-+      }
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
-+
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 4 stuff needed */
-+}
-+
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+      int i;
-+      u16 o;
-+      u16 pwr_info_offset[] = {
-+              SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
-+              SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-+      };
-+      BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+                      ARRAY_SIZE(out->core_pwr_info));
-+
-+      SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
-+      SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+      SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+      SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+      SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+      SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+           SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+           SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+           SSB_SPROM8_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+           SSB_SPROM8_ITSSI_A_SHIFT);
-+      SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+      SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+           SSB_SPROM8_MAXP_AL_SHIFT);
-+      SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+           SSB_SPROM8_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+           SSB_SPROM8_GPIOB_P3_SHIFT);
-+      SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+      SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+           SSB_SPROM8_TRI5G_SHIFT);
-+      SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+      SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+           SSB_SPROM8_TRI5GH_SHIFT);
-+      SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+      SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+           SSB_SPROM8_RXPO5G_SHIFT);
-+      SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+      SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+           SSB_SPROM8_RSSISMC2G_SHIFT);
-+      SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+           SSB_SPROM8_RSSISAV2G_SHIFT);
-+      SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+           SSB_SPROM8_BXA2G_SHIFT);
-+      SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+      SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+           SSB_SPROM8_RSSISMC5G_SHIFT);
-+      SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+           SSB_SPROM8_RSSISAV5G_SHIFT);
-+      SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+           SSB_SPROM8_BXA5G_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+      SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+      SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+      SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
-+
-+      /* Extract cores power info info */
-+      for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+              o = pwr_info_offset[i];
-+              SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_MAXP, 0);
-+
-+              SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
-+
-+              SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GH_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
-+
-+              SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
-+      }
-+
-+      /* Extract FEM info */
-+      SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
-+           SSB_SPROM8_LEDDC_ON_SHIFT);
-+      SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
-+           SSB_SPROM8_LEDDC_OFF_SHIFT);
-+
-+      SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
-+           SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
-+      SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
-+           SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
-+      SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
-+           SSB_SPROM8_TXRXC_SWITCH_SHIFT);
-+
-+      SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
-+
-+      SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
-+
-+      SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
-+           SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
-+      SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
-+           SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
-+      SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
-+      SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
-+      SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
-+      SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
-+      SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
-+      SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
-+           SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
-+
-+      SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
-+      SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
-+      SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
-+      SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
-+
-+      SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
-+           SSB_SPROM8_THERMAL_TRESH_SHIFT);
-+      SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
-+           SSB_SPROM8_THERMAL_OFFSET_SHIFT);
-+      SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
-+      SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
-+           SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
-+      SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 8 stuff needed */
-+}
-+
-+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
-+{
-+      memset(out, 0, sizeof(*out));
-+
-+      out->revision = in[size - 1] & 0x00FF;
-+      memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
-+      memset(out->et1mac, 0xFF, 6);
-+
-+      switch (out->revision) {
-+      case 1:
-+      case 2:
-+      case 3:
-+              sprom_extract_r123(out, in);
-+              break;
-+      case 4:
-+      case 5:
-+              sprom_extract_r45(out, in);
-+              break;
-+      case 8:
-+              sprom_extract_r8(out, in);
-+              break;
-+      default:
-+              pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+                       out->revision);
-+              out->revision = 1;
-+              sprom_extract_r123(out, in);
-+      }
-+
-+      if (out->boardflags_lo == 0xFFFF)
-+              out->boardflags_lo = 0;  /* per specs */
-+      if (out->boardflags_hi == 0xFFFF)
-+              out->boardflags_hi = 0;  /* per specs */
-+
-+      return 0;
-+}
-+
-+static __initdata u16 template_sprom[220];
- #endif
-+
- int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      u16 size = 0;
-+
-       switch (data->type) {
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
-+      if (size > 0)
-+              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/brcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/brcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
deleted file mode 100644 (file)
index 65c00b5..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:33:38 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
- ssb cards
-
-Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
- 2 files changed, 142 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
-+
-+static __initconst u16 bcm4306_sprom[] = {
-+      0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
-+      0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4318_sprom[] = {
-+      0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
-+      0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4321_sprom[] = {
-+      0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
-+      0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0004,
-+};
-+
-+static __initconst u16 bcm4322_sprom[] = {
-+      0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43222_sprom[] = {
-+      0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
- static struct ssb_sprom bcm63xx_sprom;
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
-       u16 size = 0;
-       switch (data->type) {
-+      case SPROM_BCM4306:
-+              memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-+              size = ARRAY_SIZE(bcm4306_sprom);
-+              break;
-+      case SPROM_BCM4318:
-+              memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
-+              size = ARRAY_SIZE(bcm4318_sprom);
-+              break;
-+      case SPROM_BCM4321:
-+              memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
-+              size = ARRAY_SIZE(bcm4321_sprom);
-+              break;
-+      case SPROM_BCM4322:
-+              memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
-+              size = ARRAY_SIZE(bcm4322_sprom);
-+              break;
-+      case SPROM_BCM43222:
-+              memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-+              size = ARRAY_SIZE(bcm43222_sprom);
-+              break;
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -5,6 +5,12 @@
- enum sprom_type {
-       SPROM_DEFAULT, /* default fallback sprom */
-+      /* SSB based */
-+      SPROM_BCM4306,
-+      SPROM_BCM4318,
-+      SPROM_BCM4321,
-+      SPROM_BCM4322,
-+      SPROM_BCM43222,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/brcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
deleted file mode 100644 (file)
index 416aa9d..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:48:26 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
-
-Similar to SSB, register a fallback sprom handler for BCMA.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig |  1 +
- arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
- 2 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -5,6 +5,7 @@ menu "Board support"
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      select BCMA
-       default y
-        help
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <board_bcm963xx.h>
-@@ -21,7 +22,7 @@
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-  */
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
--
-+#if defined (CONFIG_SSB_PCIHOST)
- static __initconst u16 bcm4306_sprom[] = {
-       0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-       0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0x0008,
- };
-+#endif /* CONFIG_SSB_PCIHOST */
- static struct ssb_sprom bcm63xx_sprom;
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+#if defined(CONFIG_SSB_PCIHOST)
-+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+#endif
-+
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
- /* FIXME: use lib_sprom after submission upstream */
-@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
- {
-       int ret = 0;
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
-       u16 size = 0;
-       switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
-       case SPROM_BCM4306:
-               memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-               size = ARRAY_SIZE(bcm4306_sprom);
-@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
-               memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
-@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
-+
-+#if defined(CONFIG_SSB_PCIHOST)
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
-+      if (ret)
-+              return ret;
-+
-+#endif
--      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
-+      if (ret)
-+              return ret;
- #endif
-       return ret;
- }
diff --git a/target/linux/brcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/brcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
deleted file mode 100644 (file)
index 5c0abb9..0000000
+++ /dev/null
@@ -1,303 +0,0 @@
-From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 30 Jul 2014 23:14:27 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
-
-Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
-BCM43228, and BCM4331.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
- 2 files changed, 264 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
- };
- #endif /* CONFIG_SSB_PCIHOST */
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+static __initconst u16 bcm4313_sprom[] = {
-+      0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
-+      0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0008,
-+};
-+
-+static __initconst u16 bcm43131_sprom[] = {
-+      0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
-+      0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43217_sprom[] = {
-+      0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x7a08,
-+};
-+
-+static __initconst u16 bcm43225_sprom[] = {
-+      0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
-+      0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43227_sprom[] = {
-+      0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43228_sprom[] = {
-+      0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
-+      0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
-+      0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
-+      0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
-+      0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
-+      0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xf008,
-+};
-+
-+static __initconst u16 bcm4331_sprom[] = {
-+      0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
-+      0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
-+      0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
-+      0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
-+      0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
-+      0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
-+      0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0009,
-+};
-+
-+#endif  /* CONFIG_BCMA_HOST_PCI */
-+
- static struct ssb_sprom bcm63xx_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
-@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
- #endif
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      case SPROM_BCM4313:
-+              memcpy(&template_sprom, &bcm4313_sprom,
-+                       sizeof(bcm4313_sprom));
-+              size = ARRAY_SIZE(bcm4313_sprom);
-+              break;
-+      case SPROM_BCM43131:
-+              memcpy(&template_sprom, &bcm43131_sprom,
-+                     sizeof(bcm43131_sprom));
-+              size = ARRAY_SIZE(bcm43131_sprom);
-+              break;
-+      case SPROM_BCM43217:
-+              memcpy(&template_sprom, &bcm43217_sprom,
-+                     sizeof(bcm43217_sprom));
-+              size = ARRAY_SIZE(bcm43217_sprom);
-+              break;
-+      case SPROM_BCM43225:
-+              memcpy(&template_sprom, &bcm43225_sprom,
-+                     sizeof(bcm43225_sprom));
-+              size = ARRAY_SIZE(bcm43225_sprom);
-+              break;
-+      case SPROM_BCM43227:
-+              memcpy(&template_sprom, &bcm43227_sprom,
-+                     sizeof(bcm43227_sprom));
-+              size = ARRAY_SIZE(bcm43227_sprom);
-+              break;
-+      case SPROM_BCM43228:
-+              memcpy(&template_sprom, &bcm43228_sprom,
-+                     sizeof(bcm43228_sprom));
-+              size = ARRAY_SIZE(bcm43228_sprom);
-+              break;
-+      case SPROM_BCM4331:
-+              memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
-+              size = ARRAY_SIZE(bcm4331_sprom);
-+              break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -11,6 +11,14 @@ enum sprom_type {
-       SPROM_BCM4321,
-       SPROM_BCM4322,
-       SPROM_BCM43222,
-+      /* BCMA based */
-+      SPROM_BCM4313,
-+      SPROM_BCM43131,
-+      SPROM_BCM43217,
-+      SPROM_BCM43225,
-+      SPROM_BCM43227,
-+      SPROM_BCM43228,
-+      SPROM_BCM4331,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/brcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
deleted file mode 100644 (file)
index 74c2846..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 19:12:33 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
- fixups
-
-Allow board_info files to supply fixups for the base sproms to adapt
-them to the actual used sprom contents in case they do not use the
-default ones.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
- .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
-       return 0;
- }
-+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
-+{
-+      unsigned int i;
-+
-+      for (i = 0; i < n; i++)
-+              sprom[fixups[i].offset] = fixups[i].value;
-+}
-+
- static __initdata u16 template_sprom[220];
- #endif
-@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
--      if (size > 0)
-+      if (size > 0) {
-+              sprom_apply_fixups(template_sprom, data->board_fixups,
-+                                 data->num_board_fixups);
-+
-               sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+      }
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -21,9 +21,17 @@ enum sprom_type {
-       SPROM_BCM4331,
- };
-+struct sprom_fixup {
-+      u16 offset;
-+      u16 value;
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+
-+      struct sprom_fixup *board_fixups;
-+      unsigned int num_board_fixups;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/brcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
deleted file mode 100644 (file)
index 40591e5..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 20:39:44 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
- fallback sprom
-
-Warn if the set pci bus/slot does not match the actual request.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
- #endif  /* CONFIG_BCMA_HOST_PCI */
--static struct ssb_sprom bcm63xx_sprom;
-+struct fallback_sprom_match {
-+      u8 pci_bus;
-+      u8 pci_dev;
-+      struct ssb_sprom sprom;
-+};
-+
-+static struct fallback_sprom_match fallback_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
-               break;
- #endif
-       case SPROM_DEFAULT:
--              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
--                     sizeof(bcm63xx_sprom));
-+              memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_default_sprom));
-               break;
-       default:
-               return -EINVAL;
-@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
-               sprom_apply_fixups(template_sprom, data->board_fixups,
-                                  data->num_board_fixups);
--              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+              sprom_extract(&fallback_sprom.sprom, template_sprom, size);
-       }
--      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
-+
-+      fallback_sprom.pci_bus = data->pci_bus;
-+      fallback_sprom.pci_dev = data->pci_dev;
- #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
- #if defined(CONFIG_SSB_PCIHOST)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -30,6 +30,9 @@ struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+      u8 pci_bus;
-+      u8 pci_dev;
-+
-       struct sprom_fixup *board_fixups;
-       unsigned int num_board_fixups;
- };
diff --git a/target/linux/brcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/brcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
deleted file mode 100644 (file)
index a491816..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:57:51 +0200
-Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
- arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/prom.c                |    6 ++++++
- 3 files changed, 44 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -2,6 +2,10 @@
- menu "Board support"
-       depends on BCM63XX
-+config BOARD_BCM63XX_DT
-+      bool "Device Tree boards (experimential)"
-+      select USE_OF
-+
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -10,11 +10,14 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/of_fdt.h>
-+#include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -125,8 +128,23 @@ void __init board_setup(void)
-       /* make sure we're running on expected cpu */
-       if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-               panic("unexpected CPU for bcm963xx board");
-+
-+#if CONFIG_OF
-+      if (initial_boot_params)
-+              __dt_setup_arch(initial_boot_params);
-+#endif
- }
-+#if CONFIG_OF
-+void __init device_tree_init(void)
-+{
-+      if (!initial_boot_params)
-+              return;
-+
-+      unflatten_and_copy_device_tree();
-+}
-+#endif
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+#if CONFIG_OF
-+static struct of_device_id of_ids[] = {
-+      { /* filled at runtime */ },
-+      { .compatible = "simple-bus" },
-+      { },
-+};
-+#endif
- /*
-  * third stage init callback, register all board devices.
-  */
-@@ -142,6 +167,15 @@ int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+#if CONFIG_OF
-+      if (of_have_populated_dt()) {
-+              snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
-+                       "brcm,bcm%x", bcm63xx_get_cpu_id());
-+
-+              of_platform_populate(NULL, of_ids, NULL, NULL);
-+      }
-+#endif
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -8,6 +8,7 @@
- #include <linux/init.h>
- #include <linux/bootmem.h>
-+#include <linux/of_fdt.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
- #include <asm/bmips.h>
-@@ -23,6 +24,11 @@ void __init prom_init(void)
- {
-       u32 reg, mask;
-+#if CONFIG_OF
-+      if (fw_passed_dtb)
-+              early_init_dt_verify((void *)fw_passed_dtb);
-+#endif
-+
-       bcm63xx_cpu_init();
-       /* stop any running watchdog */
diff --git a/target/linux/brcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/brcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
deleted file mode 100644 (file)
index 7069c23..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 26 Jun 2014 12:51:00 +0200
-Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
- by dtb
-
-Allow using the passed dtb's compatible property to match board_info
-structs instead of nvram's boardname field, which is not unique anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
- arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |    3 +++
- 3 files changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -695,6 +695,10 @@ static const struct board_info __initcon
- #endif
- };
-+static struct of_device_id const bcm963xx_boards_dt[] = {
-+      { },
-+};
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void)
-       char *board_name = NULL;
-       u32 val;
-       struct bcm_hcs *hcs;
-+      const struct of_device_id *board_match;
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void)
-       } else {
-               board_name = bcm63xx_nvram_get_name();
-       }
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(bcm963xx_boards_dt);
-+      if (board_match) {
-+              board_early_setup(board_match->data,
-+                                bcm63xx_nvram_get_mac_address);
-+
-+              return;
-+      }
-+
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -239,3 +239,21 @@ int __init board_register_devices(void)
-       return 0;
- }
-+
-+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
-+{
-+      const struct of_device_id *match;
-+      unsigned long dt_root;
-+
-+      if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
-+              return NULL;
-+
-+      dt_root = of_get_flat_dt_root();
-+
-+      for (match = m; match->compatible[0]; match++) {
-+              if (of_flat_dt_is_compatible(dt_root, match->compatible))
-+                      return match;
-+      }
-+
-+      return NULL;
-+}
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -1,11 +1,14 @@
- #ifndef __BOARD_COMMON_H
- #define __BOARD_COMMON_H
-+#include <linux/of.h>
- #include <board_bcm963xx.h>
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
-+
- #if defined(CONFIG_BOARD_BCM963XX)
- void board_bcm963xx_init(void);
- #else
diff --git a/target/linux/brcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/brcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
deleted file mode 100644 (file)
index 5dd4cba..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 21 Nov 2014 16:54:06 +0100
-Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
- list
-
-Populate the compatible to board_info list to allow dtbs to be used
-for known boards.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -696,6 +696,48 @@ static const struct board_info __initcon
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-+#ifdef CONFIG_OF
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+      { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+      { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-+      { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+      { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-+      { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-+      { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-+      { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-+      { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-+      { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+      { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-+      { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-+      { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+#endif
-+#endif /* CONFIG_OF */
-       { },
- };
diff --git a/target/linux/brcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch b/target/linux/brcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch
deleted file mode 100644 (file)
index 026eff3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -143,6 +143,18 @@ void __init device_tree_init(void)
-       unflatten_and_copy_device_tree();
- }
-+
-+int board_of_device_present(const char *alias)
-+{
-+      bool present;
-+      struct device_node *np;
-+
-+      np = of_find_node_by_path(alias);
-+      present = of_device_is_available(np);
-+      of_node_put(np);
-+
-+      return present;
-+}
- #endif
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
- static inline void board_bcm963xx_init(void) { }
- #endif
-+#if defined(CONFIG_OF)
-+int board_of_device_present(const char *alias);
-+#else
-+static inline void board_of_device_present(const char *alias)
-+{
-+      return 0;
-+}
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/brcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch
deleted file mode 100644 (file)
index 25384eb..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -23,6 +23,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+#include "boards/board_common.h"
-+
- static int flash_type;
- static struct mtd_partition mtd_partitions[] = {
-@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-+              /* don't register when already registered through from dtb */
-+              if (board_of_device_present("pflash"))
-+                      return 0;
-               if (!mtd_resources[0].start) {
-                       /* read base address of boot chip select (0) */
diff --git a/target/linux/brcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/brcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
deleted file mode 100644 (file)
index c5041a9..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Dec 2014 00:20:07 +0100
-Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -14,6 +14,8 @@
- #include <linux/irqchip.h>
- #include <linux/irqchip/irq-bcm6345-ext.h>
- #include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -21,6 +23,9 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
-+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
-+           mips_cpu_irq_of_init);
-+
- void __init arch_init_irq(void)
- {
-       void __iomem *periph_bases[2];
-@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
-       int periph_irqs[2] = { 2, 3 };
-       int ext_irqs[6];
-+#ifdef CONFIG_OF
-+      if (initial_boot_params) {
-+              irqchip_init();
-+              return;
-+      }
-+#endif
-+
-       periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/brcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
deleted file mode 100644 (file)
index e0fa439..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 19:55:32 +0100
-Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/gpio/Kconfig        |    8 +++
- drivers/gpio/Makefile       |    1 +
- drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 131 insertions(+)
- create mode 100644 drivers/gpio/gpio-bcm63xx.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -134,6 +134,13 @@ config GPIO_BCM_KONA
-       help
-         Turn on GPIO support for Broadcom "Kona" chips.
-+config GPIO_BCM63XX
-+      bool "Broadcom BCM63XX GPIO"
-+      depends on MIPS || COMPILE_TEST
-+      select GPIO_GENERIC
-+      help
-+        Turn on GPIO support for Broadcom BCM63XX xDSL chips.
-+
- config GPIO_BRCMSTB
-       tristate "BRCMSTB GPIO support"
-       default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79)     += gpio-ath79.o
- obj-$(CONFIG_GPIO_ASPEED)     += gpio-aspeed.o
- obj-$(CONFIG_GPIO_AXP209)     += gpio-axp209.o
- obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
-+obj-$(CONFIG_GPIO_BCM63XX)    += gpio-bcm63xx.o
- obj-$(CONFIG_GPIO_BD9571MWV)  += gpio-bd9571mwv.o
- obj-$(CONFIG_GPIO_BRCMSTB)    += gpio-brcmstb.o
- obj-$(CONFIG_GPIO_BT8XX)      += gpio-bt8xx.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm63xx.c
-@@ -0,0 +1,135 @@
-+/*
-+ * Driver for BCM63XX memory-mapped GPIO controllers, based on
-+ * Generic driver for memory-mapped GPIO controllers.
-+ *
-+ * Copyright 2008 MontaVista Software, Inc.
-+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
-+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/compiler.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/log2.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_gpio.h>
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      sprintf(irq_name, "gpio%d", gpio);
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_gpio_probe(struct platform_device *pdev)
-+{
-+      struct device *dev = &pdev->dev;
-+      struct resource *dat_r, *dirout_r;
-+      void __iomem *dat;
-+      void __iomem *dirout;
-+      unsigned long sz;
-+      int err;
-+      struct gpio_chip *gc;
-+      struct bgpio_pdata *pdata = dev_get_platdata(dev);
-+
-+      dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+      if (!dat_r || !dirout_r)
-+              return -EINVAL;
-+
-+      if (resource_size(dat_r) != resource_size(dirout_r))
-+              return -EINVAL;
-+
-+      sz = resource_size(dat_r);
-+
-+      dat = devm_ioremap_resource(dev, dat_r);
-+      if (IS_ERR(dat))
-+              return PTR_ERR(dat);
-+
-+      dirout = devm_ioremap_resource(dev, dirout_r);
-+      if (IS_ERR(dirout))
-+              return PTR_ERR(dirout);
-+
-+      gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-+      if (!gc)
-+              return -ENOMEM;
-+
-+      err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
-+                       BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+      if (err)
-+              return err;
-+
-+      platform_set_drvdata(pdev, gc);
-+
-+      if (dev->of_node) {
-+              int id = of_alias_get_id(dev->of_node, "gpio");
-+              u32 ngpios;
-+
-+              if (id >= 0)
-+                      gc->label = devm_kasprintf(dev, GFP_KERNEL,
-+                                                 "bcm63xx-gpio.%d", id);
-+
-+              if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
-+                      gc->ngpio = ngpios;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc->to_irq = bcm63xx_gpio_to_irq;
-+
-+      } else if (pdata) {
-+              gc->base = pdata->base;
-+              if (pdata->ngpio > 0)
-+                      gc->ngpio = pdata->ngpio;
-+      }
-+
-+      return gpiochip_add(gc);
-+}
-+
-+static int bcm63xx_gpio_remove(struct platform_device *pdev)
-+{
-+      struct gpio_chip *gc = platform_get_drvdata(pdev);
-+
-+      gpiochip_remove(gc);
-+      return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static struct of_device_id bcm63xx_gpio_of_match[] = {
-+      { .compatible = "brcm,bcm6345-gpio" },
-+      { },
-+};
-+#endif
-+
-+static struct platform_driver bcm63xx_gpio_driver = {
-+      .probe = bcm63xx_gpio_probe,
-+      .remove = bcm63xx_gpio_remove,
-+      .driver = {
-+              .name = "bcm63xx-gpio",
-+              .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
-+      },
-+};
-+
-+module_platform_driver(bcm63xx_gpio_driver);
-+
-+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/brcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
deleted file mode 100644 (file)
index fe56da0..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 23:58:54 +0100
-Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c |    2 +
- arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
- arch/mips/bcm63xx/setup.c |   3 -
- 3 files changed, 32 insertions(+), 118 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -188,6 +188,8 @@ int __init board_register_devices(void)
-       }
- #endif
-+      bcm63xx_gpio_init();
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -5,147 +5,62 @@
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- #include <linux/kernel.h>
- #include <linux/init.h>
--#include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
--#include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
--static u32 gpio_out_low_reg;
--
--static void bcm63xx_gpio_out_low_reg_init(void)
-+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6345_CPU_ID:
--              gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
--              break;
--      default:
--              gpio_out_low_reg = GPIO_DATA_LO_REG;
--              break;
--      }
--}
--
--static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
--static u32 gpio_out_low, gpio_out_high;
-+      struct resource res[2];
-+      struct bgpio_pdata pdata;
--static void bcm63xx_gpio_set(struct gpio_chip *chip,
--                           unsigned gpio, int val)
--{
--      u32 reg;
--      u32 mask;
--      u32 *v;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--              v = &gpio_out_low;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--              v = &gpio_out_high;
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      if (val)
--              *v |= mask;
--      else
--              *v &= ~mask;
--      bcm_gpio_writel(*v, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
--}
-+      memset(res, 0, sizeof(res));
-+      memset(&pdata, 0, sizeof(pdata));
--static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
--{
--      u32 reg;
--      u32 mask;
-+      res[0].flags = IORESOURCE_MEM;
-+      res[0].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[0].start += dir;
--      if (gpio >= chip->ngpio)
--              BUG();
-+      res[0].end = res[0].start + 3;
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
-+      res[1].flags = IORESOURCE_MEM;
-+      res[1].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[1].start += data;
--      return !!(bcm_gpio_readl(reg) & mask);
--}
-+      res[1].end = res[1].start + 3;
--static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
--                                    unsigned gpio, int dir)
--{
--      u32 reg;
--      u32 mask;
--      u32 tmp;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = GPIO_CTL_LO_REG;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_CTL_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      tmp = bcm_gpio_readl(reg);
--      if (dir == BCM63XX_GPIO_DIR_IN)
--              tmp &= ~mask;
--      else
--              tmp |= mask;
--      bcm_gpio_writel(tmp, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
-+      pdata.base = id * 32;
-+      pdata.ngpio = ngpio;
--      return 0;
-+      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
-+                                        &pdata, sizeof(pdata));
- }
--static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+int __init bcm63xx_gpio_init(void)
- {
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
--}
-+      int ngpio = bcm63xx_gpio_count();
-+      int data_low_reg;
--static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
--                                       unsigned gpio, int value)
--{
--      bcm63xx_gpio_set(chip, gpio, value);
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
--}
-+      if (BCMCPU_IS_6345())
-+              data_low_reg = GPIO_DATA_LO_REG_6345;
-+      else
-+              data_low_reg = GPIO_DATA_LO_REG;
-+      bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
--static struct gpio_chip bcm63xx_gpio_chip = {
--      .label                  = "bcm63xx-gpio",
--      .direction_input        = bcm63xx_gpio_direction_input,
--      .direction_output       = bcm63xx_gpio_direction_output,
--      .get                    = bcm63xx_gpio_get,
--      .set                    = bcm63xx_gpio_set,
--      .base                   = 0,
--};
-+      if (ngpio <= 32)
-+              return 0;
--int __init bcm63xx_gpio_init(void)
--{
--      bcm63xx_gpio_out_low_reg_init();
-+      bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
--      gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
--      if (!BCMCPU_IS_6345())
--              gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
--      bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
--      pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
-+      return 0;
--      return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
- }
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
- int __init bcm63xx_register_devices(void)
- {
--      /* register gpiochip */
--      bcm63xx_gpio_init();
--
-       return board_register_devices();
- }
diff --git a/target/linux/brcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
deleted file mode 100644 (file)
index c061ec4..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:21:59 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
- arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
- arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
- 5 files changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -55,7 +55,7 @@ static struct board_info __initdata boar
-       },
-       .ephy_reset_gpio                = 36,
--      .ephy_reset_gpio_flags          = GPIOF_INIT_HIGH,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -247,9 +247,10 @@ int __init board_register_devices(void)
-       platform_device_register(&bcm63xx_gpio_leds);
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
-+              bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
-+                                      board.ephy_reset_gpio_flags);
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -8,15 +8,23 @@
-  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
-+#include <asm/addrspace.h>
-+
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+static const char * const gpio_chip_labels[] = {
-+      "bcm63xx-gpio.0",
-+      "bcm63xx-gpio.1",
-+};
-+
- static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
-       struct resource res[2];
-@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
-       return 0;
- }
-+
-+static struct gpiod_lookup_table ephy_reset = {
-+      .dev_id = "bcm63xx_enet-0",
-+      .table = {
-+              { /* filled at runtime */ },
-+              { },
-+      },
-+};
-+
-+
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
-+{
-+      if (ephy_reset.table[0].chip_label)
-+              return;
-+
-+      ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
-+      ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
-+      ephy_reset.table[0].con_id = "reset";
-+      ephy_reset.table[0].flags = flags;
-+
-+      gpiod_add_lookup_table(&ephy_reset);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -3,9 +3,11 @@
- #define BCM63XX_GPIO_H
- #include <linux/init.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- int __init bcm63xx_gpio_init(void);
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/machine.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -50,8 +51,8 @@ struct board_info {
-       /* External PHY reset GPIO */
-       unsigned int ephy_reset_gpio;
--      /* External PHY reset GPIO flags from gpio.h */
--      unsigned long ephy_reset_gpio_flags;
-+      /* External PHY reset GPIO flags from gpio/machine.h */
-+      enum gpio_lookup_flags ephy_reset_gpio_flags;
-       /* fallback sprom config */
-       struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/brcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/brcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
deleted file mode 100644 (file)
index 6eb1bd0..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:26:50 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
-present in dtb
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/gpio.c |   7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -20,6 +20,8 @@
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+#include "boards/board_common.h"
-+
- static const char * const gpio_chip_labels[] = {
-       "bcm63xx-gpio.0",
-       "bcm63xx-gpio.1",
-@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
-       pdata.base = id * 32;
-       pdata.ngpio = ngpio;
--      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
--                                        &pdata, sizeof(pdata));
-+      if (!board_of_device_present("gpio0") &&
-+          !board_of_device_present("pinctrl"))
-+              platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
-+                                                2, &pdata, sizeof(pdata));
- }
- int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/brcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/brcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
deleted file mode 100644 (file)
index b571999..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:52:02 +0100
-Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
- ready gpio
-
-To prepare for a time when gpiobases don't need to be fixed anymore.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-pcmcia.c
-+++ b/arch/mips/bcm63xx/dev-pcmcia.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <asm/bootinfo.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cs.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -101,6 +102,14 @@ static const struct {
-       },
- };
-+static struct gpiod_lookup_table pcmcia_gpios_table = {
-+      .dev_id = "bcm63xx_pcmcia.0",
-+      .table = {
-+              GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
-+              { },
-+      },
-+};
-+
- int __init bcm63xx_pcmcia_register(void)
- {
-       int ret, i;
-@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6348_CPU_ID:
-               pd.ready_gpio = 22;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 22;
-               break;
-       case BCM6358_CPU_ID:
-               pd.ready_gpio = 18;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 18;
-               break;
-       default:
-               return -ENODEV;
-       }
-+      gpiod_add_lookup_table(&pcmcia_gpios_table);
-+
-       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
-       pcmcia_resources[0].end = pcmcia_resources[0].start +
-               RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/brcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
deleted file mode 100644 (file)
index 2534171..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:54:56 +0100
-Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
-
-Use the new named gpio instead of relying on the hardware gpio numbers
-matching the virtual gpio numbers.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
- drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/pcmcia/bcm63xx_pcmcia.c
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
-@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
-               stat |= SS_XVCARD;
-       stat |= SS_POWERON;
--      if (gpio_get_value(skt->pd->ready_gpio))
-+      if (gpiod_get_value(skt->ready_gpio))
-               stat |= SS_READY;
-       return stat;
-@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
-               goto err;
-       }
-+      /* get ready gpio */
-+      skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
-+      if (IS_ERR(skt->ready_gpio)) {
-+              ret = PTR_ERR(skt->ready_gpio);
-+              goto err;
-+      }
-+
-       /* resources are static */
-       sock->resource_ops = &pccard_static_ops;
-       sock->ops = &bcm63xx_pcmcia_operations;
---- a/drivers/pcmcia/bcm63xx_pcmcia.h
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/timer.h>
-+#include <linux/gpio/consumer.h>
- #include <pcmcia/ss.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
-       /* base address of io memory */
-       void __iomem *io_base;
-+
-+      /* ready gpio */
-+      struct gpio_desc *ready_gpio;
- };
- #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/brcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 5d4265f..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:38:05 +0200
-Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6318 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6318 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6318-pinctrl".
-+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
-+- gpio-controller: Identifies this node as a gpio controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6318-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>,
-+            <0x1000009c 0x0c>,
-+            <0x100000d4 0x18>;
-+      reg-names = "dirout", "dat", "mode", "mux", "pad";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led, ephy0_spd_led
-+gpio1         1       led, ephy1_spd_led
-+gpio2         2       led, ephy2_spd_led
-+gpio3         3       led, ephy3_spd_led
-+gpio4         4       led, ephy0_act_led
-+gpio5         5       led, ephy1_act_led
-+gpio6         6       led, ephy2_act_led, serial_led_data
-+gpio7         7       led, ephy3_act_led, serial_led_clk
-+gpio8         8       led, inet_act_led
-+gpio9         9       led, inet_fail_led
-+gpio10                10      led, dsl_led
-+gpio11                11      led, post_fail_led
-+gpio12                12      led, wlan_wps_led
-+gpio13                13      led, usb_pwron, usb_device_led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      -
-+gpio26                26      -
-+gpio27                27      -
-+gpio28                28      -
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+gpio32                32      -
-+gpio33                33      -
-+gpio34                34      -
-+gpio35                35      -
-+gpio36                36      -
-+gpio37                37      -
-+gpio38                38      -
-+gpio39                39      -
-+gpio40                40      usb_active
-+gpio41                41      -
-+gpio42                42      -
-+gpio43                43      -
-+gpio44                44      -
-+gpio45                45      -
-+gpio46                46      -
-+gpio47                47      -
-+gpio48                48      -
-+gpio49                49      -
diff --git a/target/linux/brcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
deleted file mode 100644 (file)
index 2a89dde..0000000
+++ /dev/null
@@ -1,609 +0,0 @@
-From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:20:39 +0200
-Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
-
-Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
-to different functions. BCM6318 is similar to BCM6328 with the addition
-of a pad register, and the GPIO meaning of the mux register changes
-based on the GPIO number.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
- 3 files changed, 572 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+config PINCTRL_BCM6318
-+      bool "BCM6318 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+
- config PINCTRL_BCM6328
-       bool "BCM6328 pincontrol driver" if COMPILE_TEST
-       select PINMUX
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-@@ -0,0 +1,564 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6318_NGPIO         50
-+
-+struct bcm6318_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6318_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6318_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+      void __iomem *pad[6];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+static const struct pinctrl_pin_desc bcm6318_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+
-+#define BCM6318_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6318_pingroup bcm6318_groups[] = {
-+      BCM6318_GROUP(gpio0),
-+      BCM6318_GROUP(gpio1),
-+      BCM6318_GROUP(gpio2),
-+      BCM6318_GROUP(gpio3),
-+      BCM6318_GROUP(gpio4),
-+      BCM6318_GROUP(gpio5),
-+      BCM6318_GROUP(gpio6),
-+      BCM6318_GROUP(gpio7),
-+      BCM6318_GROUP(gpio8),
-+      BCM6318_GROUP(gpio9),
-+      BCM6318_GROUP(gpio10),
-+      BCM6318_GROUP(gpio11),
-+      BCM6318_GROUP(gpio12),
-+      BCM6318_GROUP(gpio13),
-+      BCM6318_GROUP(gpio14),
-+      BCM6318_GROUP(gpio15),
-+      BCM6318_GROUP(gpio16),
-+      BCM6318_GROUP(gpio17),
-+      BCM6318_GROUP(gpio18),
-+      BCM6318_GROUP(gpio19),
-+      BCM6318_GROUP(gpio20),
-+      BCM6318_GROUP(gpio21),
-+      BCM6318_GROUP(gpio22),
-+      BCM6318_GROUP(gpio23),
-+      BCM6318_GROUP(gpio24),
-+      BCM6318_GROUP(gpio25),
-+      BCM6318_GROUP(gpio26),
-+      BCM6318_GROUP(gpio27),
-+      BCM6318_GROUP(gpio28),
-+      BCM6318_GROUP(gpio29),
-+      BCM6318_GROUP(gpio30),
-+      BCM6318_GROUP(gpio31),
-+      BCM6318_GROUP(gpio32),
-+      BCM6318_GROUP(gpio33),
-+      BCM6318_GROUP(gpio34),
-+      BCM6318_GROUP(gpio35),
-+      BCM6318_GROUP(gpio36),
-+      BCM6318_GROUP(gpio37),
-+      BCM6318_GROUP(gpio38),
-+      BCM6318_GROUP(gpio39),
-+      BCM6318_GROUP(gpio40),
-+      BCM6318_GROUP(gpio41),
-+      BCM6318_GROUP(gpio42),
-+      BCM6318_GROUP(gpio43),
-+      BCM6318_GROUP(gpio44),
-+      BCM6318_GROUP(gpio45),
-+      BCM6318_GROUP(gpio46),
-+      BCM6318_GROUP(gpio47),
-+      BCM6318_GROUP(gpio48),
-+      BCM6318_GROUP(gpio49),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const ephy0_spd_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const ephy1_spd_led_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const ephy2_spd_led_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const ephy3_spd_led_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const inet_fail_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const dsl_led_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const post_fail_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const wlan_wps_led_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const usb_pwron_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_active_groups[] = {
-+      "gpio40",
-+};
-+
-+#define BCM6318_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6318_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6318_function bcm6318_funcs[] = {
-+      BCM6318_MODE_FUN(led),
-+      BCM6318_MUX_FUN(ephy0_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy1_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy2_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy3_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy0_act_led, 1),
-+      BCM6318_MUX_FUN(ephy1_act_led, 1),
-+      BCM6318_MUX_FUN(ephy2_act_led, 1),
-+      BCM6318_MUX_FUN(ephy3_act_led, 1),
-+      BCM6318_MUX_FUN(serial_led_data, 3),
-+      BCM6318_MUX_FUN(serial_led_clk, 3),
-+      BCM6318_MUX_FUN(inet_act_led, 1),
-+      BCM6318_MUX_FUN(inet_fail_led, 1),
-+      BCM6318_MUX_FUN(dsl_led, 1),
-+      BCM6318_MUX_FUN(post_fail_led, 1),
-+      BCM6318_MUX_FUN(wlan_wps_led, 1),
-+      BCM6318_MUX_FUN(usb_pwron, 1),
-+      BCM6318_MUX_FUN(usb_device_led, 2),
-+      BCM6318_MUX_FUN(usb_active, 2),
-+};
-+
-+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_groups);
-+}
-+
-+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6318_groups[group].name;
-+}
-+
-+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6318_groups[group].pins;
-+      *num_pins = bcm6318_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_funcs);
-+}
-+
-+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6318_funcs[selector].name;
-+}
-+
-+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6318_funcs[selector].groups;
-+      *num_groups = bcm6318_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      if (pin < 48) {
-+              reg = __raw_readl(pctl->mux[pin / 16]);
-+              reg &= ~(3UL << ((pin % 16) * 2));
-+              reg |= mux << ((pin % 16) * 2);
-+              __raw_writel(reg, pctl->mux[pin / 16]);
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      reg = __raw_readl(pctl->pad[pin / 8]);
-+      reg &= ~(0xfUL << ((pin % 8) * 4));
-+      reg |= val << ((pin % 8) * 4);
-+      __raw_writel(reg, pctl->pad[pin / 8]);
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
-+      const struct bcm6318_function *f = &bcm6318_funcs[selector];
-+
-+      bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      if (offset < 13) {
-+              /* GPIOs 0-12 use mux 0 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 0);
-+      } else if (offset < 42) {
-+              /* GPIOs 13-41 use mux 3 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 3);
-+
-+              /* FIXME: revert to old value for non gpio? */
-+              bcm6318_set_pad(pctl, offset, 0);
-+      } else {
-+              /* no idea, really */
-+      }
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6318_pctl_ops = {
-+      .get_groups_count       = bcm6318_pinctrl_get_group_count,
-+      .get_group_name         = bcm6318_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6318_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6318_pmx_ops = {
-+      .get_functions_count    = bcm6318_pinctrl_get_func_count,
-+      .get_function_name      = bcm6318_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6318_pinctrl_get_groups,
-+      .set_mux                = bcm6318_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6318_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6318_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux, *pad;
-+      unsigned i;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
-+      pad = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(pad))
-+              return PTR_ERR(pad);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      for (i = 0; i < 3; i++)
-+              pctl->mux[i] = mux + (i * 4);
-+
-+      for (i = 0; i < 6; i++)
-+              pctl->pad[i] = pad + (i * 4);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6318_pctl_ops;
-+      pctl->desc.pmxops = &bcm6318_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
-+      pctl->desc.pins = bcm6318_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6318_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6318_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6318-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6318_pinctrl_driver = {
-+      .probe = bcm6318_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6318-pinctrl",
-+              .of_match_table = bcm6318_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch b/target/linux/brcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch
deleted file mode 100644 (file)
index 67c8cee..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6318
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6328
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6348
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6358
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6362
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6368
- config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM63268
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
deleted file mode 100644 (file)
index fe4dbe3..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 31 Jul 2017 20:10:36 +0200
-Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
-
----
- arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/brcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/brcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
deleted file mode 100644 (file)
index 03b8bfc..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 4 Feb 2017 12:58:50 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
-
-We now register them through DT, so no need to keep them here.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -27,9 +27,7 @@
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -236,10 +234,6 @@ int __init board_register_devices(void)
-            bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-uart.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_hsspi_device = {
--      .name           = "bcm63xx-hsspi",
--      .id             = 0,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_hsspi_register(void)
--{
--      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
--              !BCMCPU_IS_63268())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
--
--      return platform_device_register(&bcm63xx_hsspi_device);
--}
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ /dev/null
-@@ -1,60 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/export.h>
--#include <linux/platform_device.h>
--#include <linux/err.h>
--#include <linux/clk.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_spi_device = {
--      .id             = -1,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_spi_register(void)
--{
--      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
--
--      if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
--              bcm63xx_spi_device.name = "bcm6348-spi",
--              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
--      }
--
--      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
--              bcm63xx_spi_device.name = "bcm6358-spi",
--              spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
--      }
--
--      return platform_device_register(&bcm63xx_spi_device);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ /dev/null
-@@ -1,9 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_HSSPI_H
--#define BCM63XX_DEV_HSSPI_H
--
--#include <linux/types.h>
--
--int bcm63xx_hsspi_register(void);
--
--#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/brcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch
deleted file mode 100644 (file)
index e9d4481..0000000
+++ /dev/null
@@ -1,259 +0,0 @@
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ /dev/null
-@@ -1,76 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <bcm63xx_cpu.h>
--
--static struct resource uart0_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct resource uart1_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_uart_devices[] = {
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 0,
--              .num_resources  = ARRAY_SIZE(uart0_resources),
--              .resource       = uart0_resources,
--      },
--
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 1,
--              .num_resources  = ARRAY_SIZE(uart1_resources),
--              .resource       = uart1_resources,
--      }
--};
--
--int __init bcm63xx_uart_register(unsigned int id)
--{
--      if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
--              return -ENODEV;
--
--      if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6368()))
--              return -ENODEV;
--
--      if (id == 0) {
--              uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
--              uart0_resources[0].end = uart0_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
--      }
--
--      if (id == 1) {
--              uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
--              uart1_resources[0].end = uart1_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
--      }
--
--      return platform_device_register(&bcm63xx_uart_devices[id]);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
-+++ /dev/null
-@@ -1,7 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_UART_H_
--#define BCM63XX_DEV_UART_H_
--
--int bcm63xx_uart_register(unsigned int id);
--
--#endif /* BCM63XX_DEV_UART_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -32,8 +32,6 @@ struct board_info {
-       unsigned int    has_ohci0:1;
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
--      unsigned int    has_uart0:1;
--      unsigned int    has_uart1:1;
-       unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -20,7 +20,6 @@
- #include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_gpio.h>
-@@ -188,12 +187,6 @@ int __init board_register_devices(void)
-       bcm63xx_gpio_init();
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
-       if (board.has_pccard)
-               bcm63xx_pcmcia_register();
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,9 +35,6 @@ static struct board_info __initdata boar
-       .name                           = "CVG834G_E15R3921",
-       .expected_cpu_id                = 0x3368,
--      .has_uart0                      = 1,
--      .has_uart1                      = 1,
--
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-@@ -67,7 +64,6 @@ static struct board_info __initdata boar
-       .name                           = "96328avng",
-       .expected_cpu_id                = 0x6328,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-       .use_fallback_sprom             = 1,
-@@ -116,7 +112,6 @@ static struct board_info __initdata boar
-       .name                           = "96338GW",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -159,7 +154,6 @@ static struct board_info __initdata boar
-       .name                           = "96338W",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -204,8 +198,6 @@ static struct board_info __initdata boar
- static struct board_info __initdata board_96345gw2 = {
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
--
--      .has_uart0                      = 1,
- };
- #endif
-@@ -217,7 +209,6 @@ static struct board_info __initdata boar
-       .name                           = "96348R",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-@@ -262,7 +253,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-10",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -315,7 +305,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-11",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -370,7 +359,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -421,7 +409,6 @@ static struct board_info __initdata boar
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -466,7 +453,6 @@ static struct board_info __initdata boar
-       .name                           = "DV201AMR",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-@@ -487,7 +473,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-A",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -514,7 +499,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -567,7 +551,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW2",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -617,7 +600,6 @@ static struct board_info __initdata boar
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
diff --git a/target/linux/brcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/brcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
deleted file mode 100644 (file)
index e139426..0000000
+++ /dev/null
@@ -1,343 +0,0 @@
-From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Feb 2015 17:52:32 +0100
-Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
- 1 file changed, 262 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -43,14 +43,6 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
--      .leds = {
--              {
--                      .name           = "CVG834G:green:power",
--                      .gpio           = 37,
--                      .default_trigger= "default-on",
--              },
--      },
--
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
-@@ -72,35 +64,6 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
--
--      .leds = {
--              {
--                      .name           = "96328avng::ppp-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::power",
--                      .gpio           = 4,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "96328avng::power-fail",
--                      .gpio           = 8,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::wps",
--                      .gpio           = 9,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::ppp",
--                      .gpio           = 11,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -119,35 +82,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              }
--      },
- };
- static struct board_info __initdata board_96338w = {
-@@ -159,35 +93,6 @@ static struct board_info __initdata boar
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -217,36 +122,6 @@ static struct board_info __initdata boar
-               .has_phy                = 1,
-               .use_internal_phy       = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_10 = {
-@@ -270,35 +145,6 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_11 = {
-@@ -324,35 +170,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -374,35 +191,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -518,33 +306,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 15,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 4,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 5,
--              },
--      },
- };
- static struct board_info __initdata board_96358vw2 = {
-@@ -571,29 +332,6 @@ static struct board_info __initdata boar
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 5,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/brcm63xx/patches-4.14/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-4.14/400-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index c693ace..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
-       }
- };
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
-       int nulllen = 0;
-       int numslots;
-       unsigned long offset;
-+      unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-       static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (data && data->origin) {
-+              fis_origin = data->origin;
-+      } else {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
-                       goto out;
-               }
-               new_fl->img = &buf[i];
--              if (data && data->origin)
--                      buf[i].flash_base -= data->origin;
--              else
--                      buf[i].flash_base &= master->size-1;
-+              if (fis_origin)
-+                      buf[i].flash_base -= fis_origin;
-+
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644 (file)
index efefba4..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/bcm963xx_tag.h
-+++ b/include/linux/bcm963xx_tag.h
-@@ -92,8 +92,10 @@ struct bcm_tag {
-       __u32 rootfs_crc;
-       /* 224-227: CRC32 of kernel partition */
-       __u32 kernel_crc;
--      /* 228-235: Unused at present */
--      char reserved1[8];
-+      /* 228-231: Unused at present */
-+      char reserved1[4];
-+      /* 222-235: Openwrt: real rootfs length */
-+      __u32 real_rootfs_length;
-       /* 236-239: CRC32 of header excluding last 20 bytes */
-       __u32 header_crc;
-       /* 240-255: Unused at present */
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti
-               } else {
-                       /* OpenWrt layout */
-                       rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
-+                      rootfslen = buf->real_rootfs_length;
-+                      spareaddr = rootfsaddr + rootfslen;
-               }
-       } else {
-               goto out;
diff --git a/target/linux/brcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index 3604910..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1637,7 +1637,7 @@ static int bcm_enet_change_mtu(struct ne
-               return -EBUSY;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       /*
-        * setup maximum size before we get overflow mark in
diff --git a/target/linux/brcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index efd9763..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -652,6 +652,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/brcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644 (file)
index c9532e6..0000000
+++ /dev/null
@@ -1,269 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
-       struct bcm_enet_priv *priv;
-       struct sockaddr addr;
-       struct device *kdev;
--      struct phy_device *phydev;
-       int i, ret;
-       unsigned int size;
--      char phy_id[MII_BUS_ID_SIZE + 3];
-       void *p;
-       u32 val;
-@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
-       kdev = &priv->pdev->dev;
-       if (priv->has_phy) {
--              /* connect to PHY */
--              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--                       priv->mii_bus->id, priv->phy_id);
--
--              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--                                   PHY_INTERFACE_MODE_MII);
--
--              if (IS_ERR(phydev)) {
--                      dev_err(kdev, "could not attach to PHY\n");
--                      return PTR_ERR(phydev);
--              }
--
--              /* mask with MAC supported features */
--              phydev->supported &= (SUPPORTED_10baseT_Half |
--                                    SUPPORTED_10baseT_Full |
--                                    SUPPORTED_100baseT_Half |
--                                    SUPPORTED_100baseT_Full |
--                                    SUPPORTED_Autoneg |
--                                    SUPPORTED_Pause |
--                                    SUPPORTED_MII);
--              phydev->advertising = phydev->supported;
--
--              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--                      phydev->advertising |= SUPPORTED_Pause;
--              else
--                      phydev->advertising &= ~SUPPORTED_Pause;
--
--              phy_attached_info(phydev);
--
-+              /* Reset state */
-               priv->old_link = 0;
-               priv->old_duplex = -1;
-               priv->old_pause = -1;
--      } else {
--              phydev = NULL;
-       }
-       /* mask all interrupts and request them */
-@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
--              goto out_phy_disconnect;
-+              return ret;
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
-                         dev->name, dev);
-@@ -1086,8 +1054,8 @@ static int bcm_enet_open(struct net_devi
-       enet_dmac_writel(priv, priv->dma_chan_int_mask,
-                        ENETDMAC_IRMASK, priv->tx_chan);
--      if (phydev)
--              phy_start(phydev);
-+      if (priv->has_phy)
-+              phy_start(dev->phydev);
-       else
-               bcm_enet_adjust_link(dev);
-@@ -1128,10 +1096,6 @@ out_freeirq_rx:
- out_freeirq:
-       free_irq(dev->irq, dev);
--out_phy_disconnect:
--      if (phydev)
--              phy_disconnect(phydev);
--
-       return ret;
- }
-@@ -1236,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi
-       free_irq(priv->irq_rx, dev);
-       free_irq(dev->irq, dev);
--      /* release phy */
--      if (priv->has_phy)
--              phy_disconnect(dev->phydev);
--
-       return 0;
- }
-@@ -1805,14 +1765,49 @@ static int bcm_enet_probe(struct platfor
-       /* do minimal hardware init to be able to probe mii bus */
-       bcm_enet_hw_preinit(priv);
-+      spin_lock_init(&priv->rx_lock);
-+
-+      /* init rx timeout (used for oom) */
-+      init_timer(&priv->rx_timeout);
-+      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
-+      priv->rx_timeout.data = (unsigned long)dev;
-+
-+      /* init the mib update lock&work */
-+      mutex_init(&priv->mib_update_lock);
-+      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+      /* zero mib counters */
-+      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+              enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+      /* register netdevice */
-+      dev->netdev_ops = &bcm_enet_ops;
-+      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+      dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+      /* MTU range: 46 - 2028 */
-+      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+      SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+      ret = register_netdev(dev);
-+      if (ret)
-+              goto out_uninit_hw;
-+
-+      netif_carrier_off(dev);
-+      platform_set_drvdata(pdev, dev);
-+      priv->pdev = pdev;
-+      priv->net_dev = dev;
-       /* MII bus registration */
-       if (priv->has_phy) {
-+              struct phy_device *phydev;
-+              char phy_id[MII_BUS_ID_SIZE + 3];
-               priv->mii_bus = mdiobus_alloc();
-               if (!priv->mii_bus) {
-                       ret = -ENOMEM;
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-               bus = priv->mii_bus;
-@@ -1836,6 +1831,35 @@ static int bcm_enet_probe(struct platfor
-                       dev_err(&pdev->dev, "unable to register mdio bus\n");
-                       goto out_free_mdio;
-               }
-+
-+              /* connect to PHY */
-+              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+                       priv->mii_bus->id, priv->phy_id);
-+
-+              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+                                   PHY_INTERFACE_MODE_MII);
-+
-+              if (IS_ERR(phydev)) {
-+                      dev_err(&pdev->dev, "could not attach to PHY\n");
-+                      goto out_unregister_mdio;
-+              }
-+
-+              /* mask with MAC supported features */
-+              phydev->supported &= (SUPPORTED_10baseT_Half |
-+                                    SUPPORTED_10baseT_Full |
-+                                    SUPPORTED_100baseT_Half |
-+                                    SUPPORTED_100baseT_Full |
-+                                    SUPPORTED_Autoneg |
-+                                    SUPPORTED_Pause |
-+                                    SUPPORTED_MII);
-+              phydev->advertising = phydev->supported;
-+
-+              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+                      phydev->advertising |= SUPPORTED_Pause;
-+              else
-+                      phydev->advertising &= ~SUPPORTED_Pause;
-+
-+              phy_attached_info(phydev);
-       } else {
-               /* run platform code to initialize PHY device */
-@@ -1843,47 +1867,16 @@ static int bcm_enet_probe(struct platfor
-                   pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
-                                  bcm_enet_mdio_write_mii)) {
-                       dev_err(&pdev->dev, "unable to configure mdio bus\n");
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-       }
--      spin_lock_init(&priv->rx_lock);
--
--      /* init rx timeout (used for oom) */
--      init_timer(&priv->rx_timeout);
--      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
--      priv->rx_timeout.data = (unsigned long)dev;
--
--      /* init the mib update lock&work */
--      mutex_init(&priv->mib_update_lock);
--      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
--      /* zero mib counters */
--      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
--              enet_writel(priv, 0, ENET_MIB_REG(i));
--
--      /* register netdevice */
--      dev->netdev_ops = &bcm_enet_ops;
--      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
--      dev->ethtool_ops = &bcm_enet_ethtool_ops;
--      /* MTU range: 46 - 2028 */
--      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
--      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
--      SET_NETDEV_DEV(dev, &pdev->dev);
--
--      ret = register_netdev(dev);
--      if (ret)
--              goto out_unregister_mdio;
--
--      netif_carrier_off(dev);
--      platform_set_drvdata(pdev, dev);
--      priv->pdev = pdev;
--      priv->net_dev = dev;
--
-       return 0;
- out_unregister_mdio:
-+      if (dev->phydev)
-+              phy_disconnect(dev->phydev);
-+
-       if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
-@@ -1891,6 +1884,9 @@ out_free_mdio:
-       if (priv->mii_bus)
-               mdiobus_free(priv->mii_bus);
-+out_unregister_netdev:
-+      unregister_netdev(dev);
-+
- out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1921,6 +1917,7 @@ static int bcm_enet_remove(struct platfo
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->has_phy) {
-+              phy_disconnect(dev->phydev);
-               mdiobus_unregister(priv->mii_bus);
-               mdiobus_free(priv->mii_bus);
-       } else {
diff --git a/target/linux/brcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644 (file)
index 7bd1e51..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -968,6 +968,19 @@
- #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG              (0xb0)
- #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2192,6 +2192,18 @@ static int bcm_enetsw_open(struct net_de
-               priv->sw_port_link[i] = 0;
-       }
-+      /* enable external ports */
-+      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+              u8 rgmii_ctrl;
-+
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+
-+              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+      }
-+
-       /* reset mib */
-       val = enetsw_readb(priv, ENETSW_GMCR_REG);
-       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644 (file)
index a91494d..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -17,6 +17,9 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/spi-nor.h>
-+#include <linux/of.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
-       mtd_resources[0].end = end;
- }
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+      {
-+              .bus_num        = 0,
-+              .chip_select    = 0,
-+              .mode           = 0,
-+              .max_speed_hz   = 781000,
-+              .modalias       = "m25p80",
-+      },
-+};
-+
-+static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
-+                                             unsigned int new_hz)
-+{
-+      struct property *max_hz;
-+      __be32 *hz;
-+
-+      max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
-+      if (!max_hz)
-+              return;
-+
-+      max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
-+      if (!max_hz->name) {
-+              kfree(max_hz);
-+              return;
-+      }
-+
-+      max_hz->value = max_hz + 1;
-+      max_hz->length = sizeof(*hz);
-+
-+      hz = max_hz->value;
-+      *hz = cpu_to_be32(new_hz);
-+
-+      of_update_property(np, max_hz);
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6318_CPU_ID:
-               /* only support serial flash */
-+              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
-               return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6362_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-                       return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+              if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
-                       return BCM63XX_FLASH_TYPE_NAND;
-@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t
-               }
-       case BCM63268_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void)
- int __init bcm63xx_flash_register(void)
- {
-+      struct device_node *np;
-       u32 val;
-       switch (flash_type) {
-@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void)
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
--              pr_warn("unsupported serial flash detected\n");
--              return -ENODEV;
-+              np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
-+              if (np) {
-+                      bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
-+                      of_node_put(np);
-+                      return 0;
-+              } else {
-+                      return -ENODEV;
-+              }
-       case BCM63XX_FLASH_TYPE_NAND:
-               pr_warn("unsupported NAND flash detected\n");
-               return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -709,6 +709,7 @@
- #define GPIO_STRAPBUS_REG             0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND   0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1565,6 +1566,7 @@
- #define IDDQ_CTRL_63268_USBH          (1 << 4)
- #define MISC_STRAPBUS_6328_REG                0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644 (file)
index 16d47b4..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -31,6 +31,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- #include "board_common.h"
-@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      int i;
- #if CONFIG_OF
-       if (of_have_populated_dt()) {
-@@ -241,6 +243,10 @@ int __init board_register_devices(void)
-                                       board.ephy_reset_gpio_flags);
-       }
-+      /* register any fixups */
-+      for (i = 0; i < board.has_caldata; i++)
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
-+#include <pci_ath9k_fixup.h>
- /*
-  * flash mapping
-@@ -16,6 +17,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
-+struct ath9k_caldata {
-+      unsigned int    slot;
-+      u32             caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -33,6 +39,10 @@ struct board_info {
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
-       unsigned int    use_fallback_sprom:1;
-+      unsigned int    has_caldata:2;
-+
-+      /* wifi calibration data config */
-+      struct ath9k_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644 (file)
index 9fbfae4..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void)
-               return -ENODEV;
-       }
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+      return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
- int __init bcm63xx_flash_register(void);
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644 (file)
index c9d2ee1..0000000
+++ /dev/null
@@ -1,237 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 sprom.o
-+                 pci-ath9k-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,200 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+      u32 addr;
-+
-+      if (BCMCPU_IS_6328()) {
-+              addr = 0x18000000;
-+      } else {
-+              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              addr &= MPI_CSBASE_BASE_MASK;
-+      }
-+
-+      switch (bcm63xx_flash_get_type()) {
-+      case BCM63XX_FLASH_TYPE_PARALLEL:
-+              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+              return eeprom;
-+      case BCM63XX_FLASH_TYPE_SERIAL:
-+              /* the first megabyte is memory mapped */
-+              if (offset < 0x100000) {
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      return eeprom;
-+              }
-+
-+              if (BCMCPU_IS_6328()) {
-+                      /* we can change the memory mapped megabyte */
-+                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      bcm_hsspi_writel(0, 0x18);
-+                      return eeprom;
-+              }
-+              /* can't do anything here without talking to the SPI controller. */
-+      case BCM63XX_FLASH_TYPE_NAND:
-+      default:
-+              return NULL;
-+      }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+      void __iomem *mem;
-+      struct ath9k_platform_data *pdata = NULL;
-+      struct pci_dev *bridge = pci_upstream_bridge(dev);
-+      u16 *cal_data = NULL;
-+      u16 cmd;
-+      u32 bar0;
-+      u32 val;
-+      unsigned i;
-+
-+      for (i = 0; i < ath9k_num_fixups; i++) {
-+              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+              pdata = &ath9k_fixups[i].pdata;
-+              break;
-+      }
-+
-+      if (cal_data == NULL)
-+              return;
-+
-+      if (*cal_data != 0xa55a) {
-+              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              val = BCM_PCIE_MEM_BASE_PA_6328;
-+              break;
-+      case BCM6348_CPU_ID:
-+      case BCM6358_CPU_ID:
-+      case BCM6368_CPU_ID:
-+              val = BCM_PCI_MEM_BASE_PA;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      mem = ioremap(val, 0x10000);
-+      if (!mem) {
-+              pr_err("pci %s: ioremap error\n", pci_name(dev));
-+              return;
-+      }
-+
-+      if (bridge)
-+              pci_enable_device(bridge);
-+
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      /* set offset to first reg address */
-+      cal_data += 3;
-+      while(*cal_data != 0xffff) {
-+              u32 reg;
-+              reg = *cal_data++;
-+              val = *cal_data++;
-+              val |= (*cal_data++) << 16;
-+
-+              writel(val, mem + reg);
-+              udelay(100);
-+      }
-+
-+      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+      dev->vendor = val & 0xffff;
-+      dev->device = (val >> 16) & 0xffff;
-+
-+      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+      dev->revision = val & 0xff;
-+      dev->class = val >> 8; /* upper 3 bytes */
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+      if (bridge)
-+              pci_disable_device(bridge);
-+
-+      iounmap(mem);
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+              return;
-+
-+      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+      ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644 (file)
index 2076879..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check) __init;
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
- struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-+      unsigned int    endian_check:1;
- };
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-+      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -245,7 +245,8 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+                      board.caldata[i].endian_check);
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644 (file)
index bb111dc..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -246,7 +246,7 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
-               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check);
-+                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-       return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check)
-+      unsigned endian_check, int led_pin, bool led_active_high)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,8 @@ struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-       unsigned int    endian_check:1;
-+      int             led_pin;
-+      bool            led_active_high;
- };
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check) __init;
-+      unsigned endian_check, int led_pin, bool led_active_high) __init;
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index cc980a1..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 pci-ath9k-fixup.o sprom.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -32,6 +32,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include "board_common.h"
-@@ -244,9 +245,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -17,12 +18,16 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-       bool            led_active_high;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -45,7 +50,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644 (file)
index 58f1b13..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -332,6 +332,9 @@ struct bcm_enet_priv {
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-       int sw_port_link[ENETSW_MAX_PORT];
-+      /* platform device for associated switch */
-+      struct platform_device *b53_device;
-+
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1937,7 +1938,8 @@ static int bcm_enet_remove(struct platfo
-       return 0;
- }
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
-       .probe  = bcm_enet_probe,
-       .remove = bcm_enet_remove,
-       .driver = {
-@@ -1946,6 +1948,42 @@ struct platform_driver bcm63xx_enet_driv
-       },
- };
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+      .chip_id = 0x6300,
-+      .big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+      .name           = "b53-switch",
-+      .id             = -1,
-+      .dev            = {
-+              .platform_data = &bcm63xx_b53_pdata,
-+      },
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+      int ret;
-+
-+      bcm63xx_b53_pdata.regs = priv->base;
-+      bcm63xx_b53_pdata.enabled_ports = port_mask;
-+      bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+      ret = platform_device_register(&bcm63xx_b53_dev);
-+      if (!ret)
-+              priv->b53_device = &bcm63xx_b53_dev;
-+
-+      return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+      if (priv->b53_device)
-+              platform_device_unregister(&bcm63xx_b53_dev);
-+
-+      priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2204,29 +2242,6 @@ static int bcm_enetsw_open(struct net_de
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
--      /* reset mib */
--      val = enetsw_readb(priv, ENETSW_GMCR_REG);
--      val |= ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--      val &= ~ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--
--      /* force CPU port state */
--      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--      /* enable switch forward engine */
--      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--      val |= ENETSW_SWMODE_FWD_EN_MASK;
--      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--      /* enable jumbo on all ports */
--      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
-       /* initialize flow control buffer allocation */
-       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2685,6 +2700,9 @@ static int bcm_enetsw_probe(struct platf
-       struct bcm63xx_enetsw_platform_data *pd;
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
-+      unsigned i, num_ports = 0;
-+      u16 port_mask = BIT(8);
-+      u8 val;
-       if (!bcm_enet_shared_base[0])
-               return -EPROBE_DEFER;
-@@ -2767,6 +2785,43 @@ static int bcm_enetsw_probe(struct platf
-       priv->pdev = pdev;
-       priv->net_dev = dev;
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+              if (!port->used)
-+                      continue;
-+
-+              num_ports++;
-+              port_mask |= BIT(i);
-+      }
-+
-+      /* only register if there is more than one external port */
-+      if (num_ports > 1)
-+              bcmenet_switch_register(priv, port_mask);
-+
-       return 0;
- out_disable_clk:
-@@ -2788,6 +2843,9 @@ static int bcm_enetsw_remove(struct plat
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
-+      /* remove switch */
-+      bcmenet_switch_unregister(priv);
-+
-       clk_disable_unprepare(priv->mac_clk);
-       free_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644 (file)
index 6235c8c..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2744,9 +2744,9 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
--      if (IS_ERR(priv->base)) {
--              ret = PTR_ERR(priv->base);
-+      priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
-+      if (priv->base == NULL) {
-+              ret = -ENOMEM;
-               goto out;
-       }
diff --git a/target/linux/brcm63xx/patches-4.14/427-boards_probe_switch.patch b/target/linux/brcm63xx/patches-4.14/427-boards_probe_switch.patch
deleted file mode 100644 (file)
index 4b206a2..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -77,6 +77,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -90,6 +92,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -138,6 +142,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -162,6 +168,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -186,6 +194,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -208,6 +218,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -231,6 +243,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -252,6 +266,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -271,6 +287,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -298,6 +316,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -323,6 +343,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -348,6 +370,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -371,6 +395,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
diff --git a/target/linux/brcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch b/target/linux/brcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch
deleted file mode 100644 (file)
index dd63183..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -46,7 +46,7 @@ static struct board_info __initdata boar
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-  * known 6328 boards
-@@ -65,7 +65,7 @@ static struct board_info __initdata boar
-               .port_no                = 0,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-  * known 6338 boards
-@@ -98,7 +98,7 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-  * known 6345 boards
-@@ -108,7 +108,7 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-  * known 6348 boards
-@@ -295,7 +295,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-  * known 6358 boards
-@@ -403,7 +403,7 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-  * all boards
diff --git a/target/linux/brcm63xx/patches-4.14/500-board-D4PW.patch b/target/linux/brcm63xx/patches-4.14/500-board-D4PW.patch
deleted file mode 100644 (file)
index 456b2a4..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -295,6 +295,21 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -431,6 +446,7 @@ static const struct board_info __initcon
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.14/501-board-NB4.patch b/target/linux/brcm63xx/patches-4.14/501-board-NB4.patch
deleted file mode 100644 (file)
index 41c8a7e..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -418,6 +418,60 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -454,6 +508,8 @@ static const struct board_info __initcon
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_fxc_r1,
- #endif
- };
-@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+      { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-+      { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-4.14/502-board-96338W2_E7T.patch
deleted file mode 100644 (file)
index 69cc716..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -98,6 +98,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+      .name                           = "96338W2_E7T",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -487,6 +501,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-       &board_96338w,
-+      &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/brcm63xx/patches-4.14/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-4.14/503-board-CPVA642.patch
deleted file mode 100644 (file)
index 9e3c4e0..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -385,6 +385,25 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_CPVA642 = {
-+      .name                           = "CPVA642",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
-@@ -522,6 +541,7 @@ static const struct board_info __initcon
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_CPVA642,
-       &board_DWVS0,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644 (file)
index e78832e..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -452,6 +452,22 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+      .name                           = "AW4139",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_nb4_ser_r0 = {
-       .name                           = "NB4-SER-r0",
-       .expected_cpu_id                = 0x6358,
-@@ -543,6 +559,7 @@ static const struct board_info __initcon
-       &board_AGPFS0,
-       &board_CPVA642,
-       &board_DWVS0,
-+      &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
- #endif
-@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.14/505-board_spw500v.patch b/target/linux/brcm63xx/patches-4.14/505-board_spw500v.patch
deleted file mode 100644 (file)
index f5ca73d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -324,6 +324,36 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+      { .offset = 46, .value = 0x3046 },
-+      { .offset = 47, .value = 0x15a7 },
-+      { .offset = 48, .value = 0xfa89 },
-+      { .offset = 49, .value = 0xfe79 },
-+      { .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+      .name                           = "SPW500V",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4318,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = spw500v_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -551,6 +581,7 @@ static const struct board_info __initcon
-       &board_96348gw_a,
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-+      &board_spw500v,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-4.14/506-board_gw6200_gw6000.patch
deleted file mode 100644 (file)
index 77948d1..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -217,6 +217,48 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+static struct board_info __initdata board_gw6200 = {
-+      .name                           = "GW6200",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+      .name                           = "GW6000",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
-@@ -574,6 +616,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-       &board_96348gw,
-+      &board_gw6000,
-+      &board_gw6200,
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-+      { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+      { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-4.14/507-board-MAGIC.patch
deleted file mode 100644 (file)
index 3a88e01..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -396,6 +396,31 @@ static struct board_info __initdata boar
-               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+      .name                           = "MAGIC",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              /* it has BP_ENET_EXTERNAL_PHY */
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -626,6 +651,7 @@ static const struct board_info __initcon
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-       &board_spw500v,
-+      &board_96348sv,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/508-board_hw553.patch b/target/linux/brcm63xx/patches-4.14/508-board_hw553.patch
deleted file mode 100644 (file)
index e6e94f7..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -618,6 +618,32 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+      .name                           = "HW553",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -663,6 +689,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_HW553,
- #endif
- };
-@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.14/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-4.14/509-board_rta1320_16m.patch
deleted file mode 100644 (file)
index cfe5555..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -112,6 +112,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+      .name                           = "RTA1320_16M",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -660,6 +674,7 @@ static const struct board_info __initcon
-       &board_96338gw,
-       &board_96338w,
-       &board_96338w2_e7t,
-+      &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
-       { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/brcm63xx/patches-4.14/510-board_spw303v.patch b/target/linux/brcm63xx/patches-4.14/510-board_spw303v.patch
deleted file mode 100644 (file)
index 69432c9..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -658,6 +658,20 @@ static struct board_info __initdata boar
-               .pci_dev                        = 1,
-       },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+      .name                   = "96358-502V",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -705,6 +719,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_HW553,
-+      &board_spw303v,
- #endif
- };
-@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-4.14/511-board_V2500V.patch b/target/linux/brcm63xx/patches-4.14/511-board_V2500V.patch
deleted file mode 100644 (file)
index c77eb00..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -435,6 +435,26 @@ static struct board_info __initdata boar
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+      .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -707,6 +727,7 @@ static const struct board_info __initcon
-       &board_96348_D4PW,
-       &board_spw500v,
-       &board_96348sv,
-+      &board_V2500V_BB,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
-               val &= MPI_CSBASE_BASE_MASK;
-       }
-       boot_addr = (u8 *)KSEG1ADDR(val);
-+      pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+      /* Do an early check of CFE and then select bank 0 */
-+
-+      if (boot_addr == (u8 *)0xbf800000) {
-+              u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+                      pr_info("V2500V: nvram bank 0\n");
-+                      boot_addr = tmp_boot_addr;
-+              }
-+      }
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -21,6 +21,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_regs.h>
-@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
-                       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-                       val &= MPI_CSBASE_BASE_MASK;
-+                      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+                      /* Loading from CFE always uses Bank 0 */
-+                      if (!strcmp(board_get_name(), "V2500V_BB")) {
-+                              pr_info("V2500V: Start in Bank 0\n");
-+                              val = val + 0x400000; // Select Bank 0 start address
-+                      }
-+
-                       mtd_resources[0].start = val;
-                       mtd_resources[0].end = 0x1FFFFFFF;
-               }
diff --git a/target/linux/brcm63xx/patches-4.14/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-4.14/512-board_BTV2110.patch
deleted file mode 100644 (file)
index 4c14ea4..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -208,6 +208,24 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+      .name                           = "V2110",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -728,6 +746,7 @@ static const struct board_info __initcon
-       &board_spw500v,
-       &board_96348sv,
-       &board_V2500V_BB,
-+      &board_V2110,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/brcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/brcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
deleted file mode 100644 (file)
index f98e19d..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:55:52 +0100
-Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
-
----
- arch/mips/bcm63xx/boards/Kconfig         |    6 +
- arch/mips/bcm63xx/boards/Makefile        |    1 +
- arch/mips/bcm63xx/boards/board_common.c  |    2 +-
- arch/mips/bcm63xx/boards/board_common.h  |    6 +
- arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
- 5 files changed, 229 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -13,4 +13,10 @@ config BOARD_BCM963XX
-       default y
-        help
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+        Inventel Livebox boards using the RedBoot bootloader.
-+
- endmenu
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,2 +1,3 @@
- obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -54,7 +54,7 @@ void __init board_prom_init(void)
-       if (fw_arg3 == CFE_EPTSEAL)
-               board_bcm963xx_init();
-       else
--              panic("unsupported bootloader detected");
-+              board_livebox_init();
- }
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -24,4 +24,10 @@ static inline void board_of_device_prese
- }
- #endif
-+#if defined(CONFIG_BOARD_LIVEBOX)
-+void board_livebox_init(void);
-+#else
-+static inline void board_livebox_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <board_bcm963xx.h>
-+
-+#include "board_common.h"
-+
-+#define PFX   "board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+      .name                           = "Livebox-blue-5g",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+                .has_phy              = 1,
-+                .phy_id               = 31,
-+      },
-+
-+      .ephy_reset_gpio                = 6,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox_blue5g
-+#endif
-+};
-+
-+static struct of_device_id const livebox_boards_dt[] = {
-+      { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
-+      { }
-+};
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int livebox_get_mac_address(u8 *mac)
-+{
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
-+#define LIVEBOX_BOOT_ADDR             0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9           0x90
-+
-+void __init board_livebox_init(void)
-+{
-+      u32 val;
-+      u8 hw_version;
-+      const struct board_info *board;
-+      const struct of_device_id *board_match;
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(livebox_boards_dt);
-+      if (board_match) {
-+              board = board_match->data;
-+      } else {
-+              /* Get hardware version */
-+              val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+              val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+              bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+              hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+              hw_version &= LIVEBOX_GPIO_DETECT_MASK;
-+
-+              switch (hw_version) {
-+              case LIVEBOX_HW_BLUE5G_9:
-+                      printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              default:
-+                      printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
-+                             hw_version);
-+                      /* use default livebox configuration */
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              }
-+      }
-+
-+      /* use default livebox configuration */
-+      board_early_setup(board, livebox_get_mac_address);
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      if (val != LIVEBOX_BOOT_ADDR) {
-+              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+                      val, LIVEBOX_BOOT_ADDR);
-+              bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
-+      }
-+}
diff --git a/target/linux/brcm63xx/patches-4.14/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-4.14/514-board_ct536_ct5621.patch
deleted file mode 100644 (file)
index acb533d..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -226,6 +226,33 @@ static struct board_info __initdata boar
- };
-+static struct board_info __initdata board_ct536_ct5621 = {
-+      .name                           = "CT536_CT5621",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 0,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -747,6 +774,7 @@ static const struct board_info __initcon
-       &board_96348sv,
-       &board_V2500V_BB,
-       &board_V2110,
-+      &board_ct536_ct5621,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-+      { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/brcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch
deleted file mode 100644 (file)
index 9ccb29b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -626,6 +626,7 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-4.14/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-4.14/516-board_96348A-122.patch
deleted file mode 100644 (file)
index a6de00d..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -253,6 +253,30 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348A_122 = {
-+      .name                           = "96348A-122",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -776,6 +800,7 @@ static const struct board_info __initcon
-       &board_V2500V_BB,
-       &board_V2110,
-       &board_ct536_ct5621,
-+      &board_96348A_122,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
-       { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/brcm63xx/patches-4.14/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-4.14/519_board_CPVA502plus.patch
deleted file mode 100644 (file)
index 25e7f9f..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -225,6 +225,33 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_CPVA502plus = {
-+      .name                           = "CPVA502+",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+      },
-+
-+      .ephy_reset_gpio                = 4,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- static struct board_info __initdata board_ct536_ct5621 = {
-       .name                           = "CT536_CT5621",
-@@ -801,6 +828,7 @@ static const struct board_info __initcon
-       &board_V2110,
-       &board_ct536_ct5621,
-       &board_96348A_122,
-+      &board_CPVA502plus,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
-       { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644 (file)
index 17087b3..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -792,6 +792,58 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+      .name                           = "96368MVWG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port1",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0x12,
-+                              .name   = "port0",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 0x11,
-+                              .name   = "port3",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -843,6 +895,10 @@ static const struct board_info __initcon
-       &board_HW553,
-       &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_96368mvwg,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
-               bcm63xx_pci_enabled = 1;
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G2_PCI;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCI_REQ1 |
-+                              GPIO_MODE_6368_PCI_GNT1 |
-+                              GPIO_MODE_6368_PCI_INTB |
-+                              GPIO_MODE_6368_PCI_REQ0 |
-+                              GPIO_MODE_6368_PCI_GNT0;
-       }
- #endif
-       if (board.has_pccard) {
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+                              GPIO_MODE_6368_PCMCIA_CD2 |
-+                              GPIO_MODE_6368_PCMCIA_VS1 |
-+                              GPIO_MODE_6368_PCMCIA_VS2;
-       }
-       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644 (file)
index 03bda96..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -841,6 +841,45 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+      .name                           = "96368MVNgr",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -898,6 +937,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-+      &board_96368mvngr,
- #endif
- };
-@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644 (file)
index e482b20..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -64,6 +64,33 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/brcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644 (file)
index 522d999..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -92,6 +92,40 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+      .name                           = "963281TAN",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -918,6 +952,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644 (file)
index b91fff0..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -126,6 +126,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+      .name                           = "AW4339U",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor         = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset = 0x7d1000,
-+                      .slot           = 0,
-+                      .led_pin        = -1,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 1",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -953,6 +998,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.14/525-board_96348w3.patch b/target/linux/brcm63xx/patches-4.14/525-board_96348w3.patch
deleted file mode 100644 (file)
index 3a27db8..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -568,6 +568,24 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+      .name                           = "96348W3",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+};
-+
- static struct board_info __initdata board_96348_D4PW = {
-       .name                           = "D-4P-W",
-       .expected_cpu_id                = 0x6348,
-@@ -1028,6 +1046,7 @@ static const struct board_info __initcon
-       &board_ct536_ct5621,
-       &board_96348A_122,
-       &board_CPVA502plus,
-+      &board_96348W3,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/brcm63xx/patches-4.14/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-4.14/526-board_CT6373-1.patch
deleted file mode 100644 (file)
index 0cfcc17..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -874,6 +874,30 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_ct6373_1 = {
-+      .name                           = "CT6373-1",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1058,6 +1082,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
- #endif
-@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/brcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index 45e8717..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -937,6 +937,33 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -1085,6 +1112,7 @@ static const struct board_info __initcon
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.14/528-board_nb6.patch b/target/linux/brcm63xx/patches-4.14/528-board_nb6.patch
deleted file mode 100644 (file)
index b4de7cb..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -966,6 +966,32 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct board_info __initdata board_nb6 = {
-+      .name                           = "NB6",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name   = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
-  * known 6368 boards
-  */
-@@ -1115,6 +1141,10 @@ static const struct board_info __initcon
-       &board_DVAG3810BN,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/brcm63xx/patches-4.14/529-board_fast2604.patch b/target/linux/brcm63xx/patches-4.14/529-board_fast2604.patch
deleted file mode 100644 (file)
index 9e42c40..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -501,6 +501,22 @@ static struct board_info __initdata boar
-       .has_ehci0                      = 1,
- };
-+static struct board_info __initdata board_FAST2604 = {
-+      .name                                           = "F@ST2604",
-+      .expected_cpu_id                        = 0x6348,
-+
-+      .has_pci                                        = 1,
-+      .has_ohci0                                      = 1,
-+
-+      .has_enet1                                      = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -1112,6 +1128,7 @@ static const struct board_info __initcon
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-+      &board_FAST2604,
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/brcm63xx/patches-4.14/530-board_A4001N1.patch b/target/linux/brcm63xx/patches-4.14/530-board_A4001N1.patch
deleted file mode 100644 (file)
index 0cecd9c..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -127,6 +127,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N1 = {
-+      .name                                   = "963281T_TEF",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
-       .name                           = "AW4339U",
-       .expected_cpu_id                = 0x6328,
-@@ -1109,6 +1152,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_A4001N1,
-       &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/brcm63xx/patches-4.14/531-board_AR-5387un.patch b/target/linux/brcm63xx/patches-4.14/531-board_AR-5387un.patch
deleted file mode 100644 (file)
index f2af2c5..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,78 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+      { .offset = 2, .value = 0x05bb },
-+      { .offset = 65, .value = 0x1204 },
-+      { .offset = 78, .value = 0x0303 },
-+      { .offset = 79, .value = 0x0202 },
-+      { .offset = 80, .value = 0xff02 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xff11 },
-+      { .offset = 98, .value = 0x1567 },
-+      { .offset = 99, .value = 0xfb24 },
-+      { .offset = 100, .value = 0x3e3c },
-+      { .offset = 101, .value = 0x4038 },
-+      { .offset = 102, .value = 0xfe7f },
-+      { .offset = 103, .value = 0x1279 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xff03 },
-+      { .offset = 114, .value = 0x154c },
-+      { .offset = 115, .value = 0xfb27 },
-+      { .offset = 116, .value = 0x3e3c },
-+      { .offset = 117, .value = 0x4038 },
-+      { .offset = 118, .value = 0xfe87 },
-+      { .offset = 119, .value = 0x1233 },
-+      { .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+      .name                                   = "96328A-1441N1",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5387un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5387un_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
-       .name                           = "963281TAN",
-       .expected_cpu_id                = 0x6328,
-@@ -1151,6 +1223,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.14/532-board_AR-5381u.patch b/target/linux/brcm63xx/patches-4.14/532-board_AR-5381u.patch
deleted file mode 100644 (file)
index dc8efed..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,60 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+      { .offset = 97, .value = 0xfee5 },
-+      { .offset = 98, .value = 0x157c },
-+      { .offset = 99, .value = 0xfae7 },
-+      { .offset = 113, .value = 0xfefa },
-+      { .offset = 114, .value = 0x15d6 },
-+      { .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+      .name                                   = "96328A-1241N",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5381u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5387un_fixups[] = {
-       { .offset = 2, .value = 0x05bb },
-       { .offset = 65, .value = 0x1204 },
-@@ -1223,6 +1277,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-4.14/533-board_rta770bw.patch
deleted file mode 100644 (file)
index d56df55..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -411,6 +411,20 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+      .name                           = "RTA770BW",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1291,6 +1305,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-+      &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+      { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.14/534-board_hw556.patch b/target/linux/brcm63xx/patches-4.14/534-board_hw556.patch
deleted file mode 100644 (file)
index cf55255..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/pci_ids.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW556_C = {
-+      .name                                   = "HW556_C",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xeffe00,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_A = {
-+      .name                                   = "HW556_A",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xf7e000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_B = {
-+      .name                                   = "HW556_B",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xefe000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
-       .name                   = "96358-502V",
-@@ -1341,6 +1428,9 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-       &board_HW553,
-+      &board_HW556_A,
-+      &board_HW556_B,
-+      &board_HW556_C,
-       &board_spw303v,
-       &board_DVAG3810BN,
- #endif
-@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-+      { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-+      { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
-+      { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.14/535-board_rta770w.patch b/target/linux/brcm63xx/patches-4.14/535-board_rta770w.patch
deleted file mode 100644 (file)
index c78e59e..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -426,6 +426,25 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+      .name                           = "RTA770W",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1393,6 +1412,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-       &board_rta770bw,
-+      &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-       { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
-+      { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.14/536-board_fast2704.patch b/target/linux/brcm63xx/patches-4.14/536-board_fast2704.patch
deleted file mode 100644 (file)
index 358e974..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -341,6 +341,43 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+      .name                           = "F@ST2704V2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .has_usbd                       = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -1402,6 +1439,7 @@ static const struct board_info __initcon
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-+      &board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.14/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-4.14/537-board_fast2504n.patch
deleted file mode 100644 (file)
index b74274b..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Max Staudt <openwrt.max@enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max@enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+      .name                           = "F@ST2504n",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- /*
-@@ -1495,6 +1530,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6362
-       &board_nb6,
-+      &board_fast2504n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-4.14/555-board_96318ref.patch b/target/linux/brcm63xx/patches-4.14/555-board_96318ref.patch
deleted file mode 100644 (file)
index c9c532d..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -50,6 +50,55 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+      .name                           = "96318REF",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -1467,6 +1516,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
-       &board_cvg834g,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      &board_96318ref,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_AR5381u,
-@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_3368
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
diff --git a/target/linux/brcm63xx/patches-4.14/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-4.14/556-board_96318ref_p300.patch
deleted file mode 100644 (file)
index f4ff4fd..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -96,6 +96,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+      .name                           = "96318REF_P300",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1518,6 +1562,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-+      &board_96318ref_p300,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+      { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
diff --git a/target/linux/brcm63xx/patches-4.14/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-4.14/557-board_bcm963269bhr.patch
deleted file mode 100644 (file)
index d5af2f0..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+      .name                           = "963269BHR",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1634,6 +1678,9 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963269bhr,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.14/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-4.14/558-board_AR1004G.patch
deleted file mode 100644 (file)
index 3cf41b0..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From: "mexit@o2.pl" <mexit@o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit@o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -647,6 +647,21 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+      .name                           = "AR1004G",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- /* BT Voyager 2110 */
- static struct board_info __initdata board_V2110 = {
-@@ -1649,6 +1664,7 @@ static const struct board_info __initcon
-       &board_96348A_122,
-       &board_CPVA502plus,
-       &board_96348W3,
-+      &board_96348gw_10_AR1004G,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.14/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-4.14/559-board_vw6339gu.patch
deleted file mode 100644 (file)
index 355bdb2..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+      .name                           = "VW6339GU",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN2",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN4",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 7,
-+                              .name   = "WAN",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -1696,6 +1741,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963269bhr,
-+      &board_vw6339gu,
- #endif
- };
-@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+      { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.14/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-4.14/560-board_963268gu_p300.patch
deleted file mode 100644 (file)
index b8a2af4..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar
-  * known 63268/63269 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+      .name                           = "963268BU_P300",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 17,
-+                              .name   = "FE1",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "GbE2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0,
-+                              .name   = "GbE3",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "GbE1",
-+                      },
-+
-+                      [6] = {
-+                              .used   = 1,
-+                              .phy_id = 24,
-+                              .name   = "GbE4",
-+                      },
-+
-+                      [7] = {
-+                              .used   = 1,
-+                              .phy_id = 25,
-+                              .name   = "GbE5",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963269bhr = {
-       .name                           = "963269BHR",
-       .expected_cpu_id                = 0x63268,
-@@ -1740,6 +1798,7 @@ static const struct board_info __initcon
-       &board_96368mvngr,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
- #endif
-@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-4.14/561-board_WAP-5813n.patch
deleted file mode 100644 (file)
index 8b8b1ed..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -13,6 +13,8 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/pci_ids.h>
-+#include <linux/platform_data/b53.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+      { .offset = 97, .value = 0xfeed },
-+      { .offset = 98, .value = 0x15d1 },
-+      { .offset = 99, .value = 0xfb0d },
-+      { .offset = 113, .value = 0xfef7 },
-+      { .offset = 114, .value = 0x15f7 },
-+      { .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+      .name                           = "96369R-1231N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = wap5813n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -1796,6 +1839,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963268bu_p300,
-@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-4.14/562-board_VR-3025u.patch b/target/linux/brcm63xx/patches-4.14/562-board_VR-3025u.patch
deleted file mode 100644 (file)
index 36014ea..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+      .name                                   = "96368M-1541N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1839,6 +1892,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_VR3025u,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/563-board_VR-3025un.patch b/target/linux/brcm63xx/patches-4.14/563-board_VR-3025un.patch
deleted file mode 100644 (file)
index a34b7a1..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+      .name                                   = "96368M-1341N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1893,6 +1946,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_VR3025u,
-+      &board_VR3025un,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+      { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch b/target/linux/brcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch
deleted file mode 100644 (file)
index 9e06802..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3
-       { .offset = 115, .value = 0xfad9 },
- };
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+      .name                           = "P870HW-51a_v2",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -1945,6 +1987,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_WAP5813n,
-@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-4.14/565-board_hw520.patch b/target/linux/brcm63xx/patches-4.14/565-board_hw520.patch
deleted file mode 100644 (file)
index 517df7d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW520 = {
-+      .name                           = "HW6358GW_B",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1971,6 +2001,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-       &board_HW556_B,
-@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-+      { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-       { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/brcm63xx/patches-4.14/566-board_A4001N.patch b/target/linux/brcm63xx/patches-4.14/566-board_A4001N.patch
deleted file mode 100644 (file)
index 2dc61d5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N = {
-+      .name                           = "96328dg2x2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
-       .name                                   = "963281T_TEF",
-       .expected_cpu_id                        = 0x6328,
-@@ -1952,6 +1995,7 @@ static const struct board_info __initcon
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-+      &board_A4001N,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n", .data = &board_A4001N, },
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/brcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch b/target/linux/brcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch
deleted file mode 100644 (file)
index b7e155d..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -142,6 +142,74 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe9d },
-+      { .offset = 98, .value = 0x1854 },
-+      { .offset = 99, .value = 0xfa59 },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfe79 },
-+      { .offset = 114, .value = 0x17f5 },
-+      { .offset = 115, .value = 0xfa47 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 162, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 170, .value = 0x2222 },
-+      { .offset = 171, .value = 0x5555 },
-+      { .offset = 172, .value = 0x5555 },
-+      { .offset = 173, .value = 0x4444 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x5555 },
-+      { .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+      .name                           = "AW5200B",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = dsl2751b_e1_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_dsl_2751b_d1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch b/target/linux/brcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch
deleted file mode 100644 (file)
index 29263bc..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+      .name                           = "DGND3700v1_3800B",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2131,6 +2155,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_DGND3700v1_3800B,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/569-board_homehub2a.patch b/target/linux/brcm63xx/patches-4.14/569-board_homehub2a.patch
deleted file mode 100644 (file)
index 9909994..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_homehub2a = {
-+      .name                           = "HOMEHUB2A",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW520 = {
-       .name                           = "HW6358GW_B",
-       .expected_cpu_id                = 0x6358,
-@@ -2138,6 +2163,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_homehub2a,
-       &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
-+      { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-       { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
diff --git a/target/linux/brcm63xx/patches-4.14/570-board_HG655b.patch b/target/linux/brcm63xx/patches-4.14/570-board_HG655b.patch
deleted file mode 100644 (file)
index 7b4d1fc..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG655b = {
-+      .name                           = "HW65x",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0x7c0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2182,6 +2228,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/571-board_fast2704n.patch b/target/linux/brcm63xx/patches-4.14/571-board_fast2704n.patch
deleted file mode 100644 (file)
index fb84d8d..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -210,6 +210,45 @@ static struct board_info __initdata boar
-               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704N = {
-+      .name                           = "F@ST2704N",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -2153,6 +2192,7 @@ static const struct board_info __initcon
-       &board_96318ref,
-       &board_96318ref_p300,
-       &board_dsl_2751b_d1,
-+      &board_FAST2704N,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-+      { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/patches-4.14/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-4.14/572-board_VR-3026e.patch
deleted file mode 100644 (file)
index dec8adf..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3026e_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3026e = {
-+      .name                                   = "96368MT-1341N1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3026e_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2272,6 +2325,7 @@ static const struct board_info __initcon
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-+      &board_VR3026e,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-+      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/brcm63xx/patches-4.14/573-board_R5010UNv2.patch b/target/linux/brcm63xx/patches-4.14/573-board_R5010UNv2.patch
deleted file mode 100644 (file)
index ab3e6fe..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -623,6 +623,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_R5010UNV2 = {
-+      .name                                   = "96328ang",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -2256,6 +2300,7 @@ static const struct board_info __initcon
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-+      &board_R5010UNV2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.14/574-board_HG622.patch b/target/linux/brcm63xx/patches-4.14/574-board_HG622.patch
deleted file mode 100644 (file)
index 3a14751..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG622 = {
-+      .name                           = "96368MVWG_hg622",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xfa0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2366,6 +2412,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/brcm63xx/patches-4.14/575-board_EVG2000.patch b/target/linux/brcm63xx/patches-4.14/575-board_EVG2000.patch
deleted file mode 100644 (file)
index 1619376..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata EVG2000_fixups[] = {
-+  { .offset = 219, .value = 0xec08 },
-+};
-+
-+static struct board_info __initdata board_EVG2000 = {
-+      .name                           = "96369PVG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = EVG2000_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(EVG2000_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_HG655b = {
-       .name                           = "HW65x",
-       .expected_cpu_id                = 0x6368,
-@@ -2412,6 +2448,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_EVG2000,
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-+      { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/576-board_AV4202N.patch b/target/linux/brcm63xx/patches-4.14/576-board_AV4202N.patch
deleted file mode 100644 (file)
index c61fcdd..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar
-  * known 6368 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_AV4202N = {
-+      .name                           = "96368_Swiss_S1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+
-+};
-+
- static struct board_info __initdata board_96368mvwg = {
-       .name                           = "96368MVWG",
-       .expected_cpu_id                = 0x6368,
-@@ -2445,6 +2490,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_AV4202N,
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/brcm63xx/patches-4.14/577-board_VH4032N.patch b/target/linux/brcm63xx/patches-4.14/577-board_VH4032N.patch
deleted file mode 100644 (file)
index baed99c..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vh4032n_fixups[] = {
-+      { .offset = 2, .value = 0x04d2 },
-+      { .offset = 4, .value = 0x4350 },
-+      { .offset = 65, .value = 0x1300 },
-+      { .offset = 68, .value = 0x0402 },
-+      { .offset = 70, .value = 0x0090 },
-+      { .offset = 71, .value = 0x4c19 },
-+      { .offset = 72, .value = 0x2345 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xfed7 },
-+      { .offset = 98, .value = 0x15a6 },
-+      { .offset = 99, .value = 0xfaee },
-+      { .offset = 100, .value = 0x3e3a },
-+      { .offset = 101, .value = 0x3a36 },
-+      { .offset = 102, .value = 0xff7f },
-+      { .offset = 103, .value = 0x11b9 },
-+      { .offset = 104, .value = 0xfc53 },
-+      { .offset = 105, .value = 0xffe6 },
-+      { .offset = 106, .value = 0xfdd2 },
-+      { .offset = 107, .value = 0xfe49 },
-+      { .offset = 108, .value = 0xff6a },
-+      { .offset = 109, .value = 0x136e },
-+      { .offset = 110, .value = 0xfbed },
-+      { .offset = 111, .value = 0x0000 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xfee2 },
-+      { .offset = 114, .value = 0x15e5 },
-+      { .offset = 115, .value = 0xfaed },
-+      { .offset = 116, .value = 0x3e3a },
-+      { .offset = 117, .value = 0x3a36 },
-+      { .offset = 118, .value = 0xffc8 },
-+      { .offset = 119, .value = 0x12b8 },
-+      { .offset = 120, .value = 0xfca1 },
-+      { .offset = 121, .value = 0xff9b },
-+      { .offset = 122, .value = 0x122a },
-+      { .offset = 123, .value = 0xfcc8 },
-+      { .offset = 124, .value = 0xff95 },
-+      { .offset = 125, .value = 0x146b },
-+      { .offset = 126, .value = 0xfbba },
-+      { .offset = 127, .value = 0x0000 },
-+      { .offset = 161, .value = 0x0000 },
-+      { .offset = 162, .value = 0x0000 },
-+      { .offset = 169, .value = 0x0000 },
-+      { .offset = 170, .value = 0x0000 },
-+      { .offset = 171, .value = 0x0000 },
-+      { .offset = 172, .value = 0x0000 },
-+      { .offset = 173, .value = 0x0000 },
-+      { .offset = 174, .value = 0x0000 },
-+      { .offset = 175, .value = 0x0000 },
-+      { .offset = 176, .value = 0x0000 },
-+      { .offset = 219, .value = 0x1108 },
-+};
-+
-+static struct board_info __initdata board_VH4032N = {
-+      .name                           = "VH4032N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vh4032n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vh4032n_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2498,6 +2598,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_VR3026e,
-@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-+      { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.14/578-board_R1000H.patch b/target/linux/brcm63xx/patches-4.14/578-board_R1000H.patch
deleted file mode 100644 (file)
index f2b2e1e..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_R1000H = {
-+      .name                           = "R1000H",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -2598,6 +2621,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_R1000H,
-       &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
-       { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/brcm63xx/patches-4.14/579-board_AR-5315u.patch b/target/linux/brcm63xx/patches-4.14/579-board_AR-5315u.patch
deleted file mode 100644 (file)
index 0393d46..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -143,6 +143,67 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5315u_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1255 },
-+      { .offset = 97, .value = 0xfe55 },
-+      { .offset = 98, .value = 0x171d },
-+      { .offset = 99, .value = 0xfa42 },
-+      { .offset = 113, .value = 0xfeb7 },
-+      { .offset = 114, .value = 0x18cd },
-+      { .offset = 115, .value = 0xfa4f },
-+      { .offset = 162, .value = 0x6444 },
-+      { .offset = 170, .value = 0x6444 },
-+      { .offset = 172, .value = 0x6444 },
-+};
-+
-+static struct board_info __initdata board_AR5315u = {
-+      .name                           = "96318A-1441N1",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5315u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-       { .offset = 96, .value = 0x2046 },
-       { .offset = 97, .value = 0xfe9d },
-@@ -2538,6 +2599,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_AR5315u,
-       &board_dsl_2751b_d1,
-       &board_FAST2704N,
- #endif
-@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-       { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.14/580-board_AD1018.patch b/target/linux/brcm63xx/patches-4.14/580-board_AD1018.patch
deleted file mode 100644 (file)
index a48ecf9..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -357,6 +357,73 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ad1018_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1256 },
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe69 },
-+      { .offset = 98, .value = 0x1726 },
-+      { .offset = 99, .value = 0xfa5c },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfea8 },
-+      { .offset = 114, .value = 0x1978 },
-+      { .offset = 115, .value = 0xfa26 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 171, .value = 0x2222 },
-+      { .offset = 173, .value = 0x2222 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x2222 },
-+      { .offset = 176, .value = 0x4444 },
-+};
-+
-+static struct board_info __initdata board_AD1018 = {
-+      .name                                   = "96328avngr",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "FIBRE",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ad1018_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5381u_fixups[] = {
-       { .offset = 97, .value = 0xfee5 },
-       { .offset = 98, .value = 0x157c },
-@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AD1018,
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-       { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
-+      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.14/598-board_sr102.patch b/target/linux/brcm63xx/patches-4.14/598-board_sr102.patch
deleted file mode 100644 (file)
index c8db6c1..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_BSKYB_63168 = {
-+      .name                           = "BSKYB_63168",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 0,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -2762,6 +2805,7 @@ static const struct board_info __initcon
-       &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
-+      &board_BSKYB_63168,
- #endif
- };
-@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+      { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.14/800-wl_exports.patch b/target/linux/brcm63xx/patches-4.14/800-wl_exports.patch
deleted file mode 100644 (file)
index 5f5b1c2..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -24,6 +24,12 @@
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-+/*
-+ * Required export for WL
-+ */
-+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
-       u32 crc, expected_crc;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
diff --git a/target/linux/brcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch
deleted file mode 100644 (file)
index 11a8353..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -8,6 +8,7 @@
-  */
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
-@@ -387,7 +388,19 @@ struct fallback_sprom_match {
-       struct ssb_sprom sprom;
- };
--static struct fallback_sprom_match fallback_sprom;
-+struct fallback_sprom_match fallback_sprom;
-+
-+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
-+{
-+      if (pci_bus != fallback_sprom.pci_bus ||
-+          pci_slot != fallback_sprom.pci_dev)
-+              pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                      fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                      pci_bus, pci_slot);
-+      memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-+      return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/brcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644 (file)
index 2aca2f3..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
-+#define RTL8367_PHY_AD_REG                    0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE                       BIT(12)
- #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
-@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
-       case RTL8367_EXTIF_MODE_RGMII_33V:
-               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
-               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
-               break;
-       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/brcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/brcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
deleted file mode 100644 (file)
index 7a3c2f0..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 6 Apr 2014 22:33:16 +0200
-Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
-
-Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
-it by ensuring we are always doing aligned copies.
-
-Should fix filename corruption in jffs2 with SMP.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- fs/jffs2/nodelist.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -259,7 +259,7 @@ struct jffs2_full_dirent
-       uint32_t ino; /* == zero for unlink */
-       unsigned int nhash;
-       unsigned char type;
--      unsigned char name[0];
-+      unsigned char name[0] __attribute__((aligned((sizeof(long)))));
- };
- /*
diff --git a/target/linux/brcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/brcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch
deleted file mode 100644 (file)
index 2d990f7..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2239,6 +2239,10 @@ static int bcm_enetsw_open(struct net_de
-               rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-               rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              if (BCMCPU_IS_63268()) {
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
-+              }
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
diff --git a/target/linux/brcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-4.19/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 3974b9b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-4.19/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index 0bbf7c8..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -402,7 +402,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-4.19/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index d276e08..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o
-+                 dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -35,6 +35,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -879,22 +880,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -908,14 +894,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/brcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-4.19/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.19/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 64ea473..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-4.19/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 8a532fe..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o usb-common.o
-+                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.19/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 6fc5551..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -881,6 +882,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
diff --git a/target/linux/brcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.19/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index f7311a8..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -13,11 +13,18 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-4.19/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index 7d0a35c..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.19/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 3db82bb..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -882,6 +883,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-4.19/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/brcm63xx/patches-4.19/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch
deleted file mode 100644 (file)
index 6fd5cbb..0000000
+++ /dev/null
@@ -1,482 +0,0 @@
-From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:29:43 +0200
-Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser
-
-Move the bcm963xx Image Tag parsing into its own partition parser. This
-Allows reusing the parser with different full flash parsers.
-
-While moving it, rename it to bcm963* to better reflect it isn't chip
-but board specific.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I tried to keep the code as-is, to keep the changes as small as
-possible.
-
-One side effect is that the partitions get renumbered, which means any
-root=/dev/mtdblock* will now point to the wrong mtd device. But since
-bcm963xx boards will require these hardcoded in the kernel commandline
-anyway this should b a non issue, as it can be easily updated.
-
-There is no such thing in the mips/bcm63xx defconfig, so nothing to update
-there.
-
- drivers/mtd/Kconfig                   |   1 +
- drivers/mtd/bcm63xxpart.c             | 155 ++----------------------
- drivers/mtd/parsers/Kconfig           |  11 ++
- drivers/mtd/parsers/Makefile          |   1 +
- drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++
- 5 files changed, 235 insertions(+), 147 deletions(-)
- create mode 100644 drivers/mtd/parsers/parser_imagetag.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -162,6 +162,7 @@ config MTD_BCM63XX_PARTS
-       tristate "BCM63XX CFE partitioning support"
-       depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-       select CRC32
-+      select MTD_PARSER_IMAGETAG
-       help
-         This provides partions parsing for BCM63xx devices with CFE
-         bootloaders.
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd
-       return 0;
- }
--static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
--      loff_t tag_offset, struct bcm_tag *buf)
--{
--      int ret;
--      size_t retlen;
--      u32 computed_crc;
--
--      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
--      if (ret)
--              return ret;
--
--      if (retlen != sizeof(*buf))
--              return -EIO;
--
--      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
--                              offsetof(struct bcm_tag, header_crc));
--      if (computed_crc == buf->header_crc) {
--              STR_NULL_TERMINATE(buf->board_id);
--              STR_NULL_TERMINATE(buf->tag_version);
--
--              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
--                      name, tag_offset, buf->tag_version, buf->board_id);
--
--              return 0;
--      }
--
--      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
--              name, tag_offset, buf->header_crc, computed_crc);
--      return 1;
--}
-+static const char * const bcm63xx_cfe_part_types[] = {
-+      "bcm963xx-imagetag",
-+      NULL,
-+};
- static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
-       const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
- {
--      /* CFE, NVRAM and global Linux are always present */
--      int nrparts = 3, curpart = 0;
--      struct bcm_tag *buf = NULL;
-       struct mtd_partition *parts;
--      int ret;
--      unsigned int rootfsaddr, kerneladdr, spareaddr;
--      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int nrparts = 3, curpart = 0;
-       unsigned int cfelen, nvramlen;
-       unsigned int cfe_erasesize;
-       int i;
--      bool rootfs_first = false;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
-                             BCM963XX_CFE_BLOCK_SIZE);
-@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti
-       nvramlen = nvram->psi_size * SZ_1K;
-       nvramlen = roundup(nvramlen, cfe_erasesize);
--      buf = vmalloc(sizeof(struct bcm_tag));
--      if (!buf)
--              return -ENOMEM;
--
--      /* Get the tag */
--      ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
--      if (!ret) {
--              STR_NULL_TERMINATE(buf->flash_image_start);
--              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
--                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid rootfs address: %*ph\n",
--                              (int)sizeof(buf->flash_image_start),
--                              buf->flash_image_start);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_address);
--              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
--                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
--                      pr_err("invalid kernel address: %*ph\n",
--                              (int)sizeof(buf->kernel_address),
--                              buf->kernel_address);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->kernel_length);
--              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
--                      pr_err("invalid kernel length: %*ph\n",
--                              (int)sizeof(buf->kernel_length),
--                              buf->kernel_length);
--                      goto invalid_tag;
--              }
--
--              STR_NULL_TERMINATE(buf->total_length);
--              if (kstrtouint(buf->total_length, 10, &totallen)) {
--                      pr_err("invalid total length: %*ph\n",
--                              (int)sizeof(buf->total_length),
--                              buf->total_length);
--                      goto invalid_tag;
--              }
--
--              kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
--              rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
--              spareaddr = roundup(totallen, master->erasesize) + cfelen;
--
--              if (rootfsaddr < kerneladdr) {
--                      /* default Broadcom layout */
--                      rootfslen = kerneladdr - rootfsaddr;
--                      rootfs_first = true;
--              } else {
--                      /* OpenWrt layout */
--                      rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
--              }
--      } else if (ret > 0) {
--invalid_tag:
--              kernellen = 0;
--              rootfslen = 0;
--              rootfsaddr = 0;
--              spareaddr = cfelen;
--      } else {
--              goto out;
--      }
--      sparelen = master->size - spareaddr - nvramlen;
--
--      /* Determine number of partitions */
--      if (rootfslen > 0)
--              nrparts++;
--
--      if (kernellen > 0)
--              nrparts++;
--
-       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
--      if (!parts) {
--              ret = -ENOMEM;
--              goto out;
--      }
-+      if (!parts)
-+              return -ENOMEM;
-       /* Start building partition list */
-       parts[curpart].name = "CFE";
-@@ -230,30 +124,6 @@ invalid_tag:
-       parts[curpart].size = cfelen;
-       curpart++;
--      if (kernellen > 0) {
--              int kernelpart = curpart;
--
--              if (rootfslen > 0 && rootfs_first)
--                      kernelpart++;
--              parts[kernelpart].name = "kernel";
--              parts[kernelpart].offset = kerneladdr;
--              parts[kernelpart].size = kernellen;
--              curpart++;
--      }
--
--      if (rootfslen > 0) {
--              int rootfspart = curpart;
--
--              if (kernellen > 0 && rootfs_first)
--                      rootfspart--;
--              parts[rootfspart].name = "rootfs";
--              parts[rootfspart].offset = rootfsaddr;
--              parts[rootfspart].size = rootfslen;
--              if (sparelen > 0  && !rootfs_first)
--                      parts[rootfspart].size += sparelen;
--              curpart++;
--      }
--
-       parts[curpart].name = "nvram";
-       parts[curpart].offset = master->size - nvramlen;
-       parts[curpart].size = nvramlen;
-@@ -263,22 +133,13 @@ invalid_tag:
-       parts[curpart].name = "linux";
-       parts[curpart].offset = cfelen;
-       parts[curpart].size = master->size - cfelen - nvramlen;
-+      parts[curpart].types = bcm63xx_cfe_part_types;
-       for (i = 0; i < nrparts; i++)
-               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-                       parts[i].name, parts[i].offset, parts[i].size);
--      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
--              sparelen);
--
-       *pparts = parts;
--      ret = 0;
--
--out:
--      vfree(buf);
--
--      if (ret)
--              return ret;
-       return nrparts;
- }
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,14 @@
-+config MTD_PARSER_IMAGETAG
-+      tristate "Parser for BCM963XX Image Tag format partitions"
-+      depends on BCM63XX || BMIPS || COMPILE_TEST
-+      select CRC32
-+      help
-+        Image Tag is the firmware header used by broadcom on their xDSL line
-+        of devices. It is used to describe the offsets and lengths of kernel
-+        and rootfs partitions.
-+        This driver adds support for parsing a partition with an Image Tag
-+        header and creates up to two partitions, kernel and rootfs.
-+
- config MTD_PARSER_TRX
-       tristate "Parser for TRX format partitions"
-       depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1,2 +1,3 @@
-+obj-$(CONFIG_MTD_PARSER_IMAGETAG)     += parser_imagetag.o
- obj-$(CONFIG_MTD_PARSER_TRX)          += parser_trx.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)               += sharpslpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -0,0 +1,214 @@
-+/*
-+ * BCM63XX CFE image tag parser
-+ *
-+ * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
-+ *                      Mike Albon <malbon@openwrt.org>
-+ * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
-+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/bcm963xx_tag.h>
-+#include <linux/crc32.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/sizes.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+/* Ensure strings read from flash structs are null terminated */
-+#define STR_NULL_TERMINATE(x) \
-+      do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
-+
-+static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name,
-+      loff_t tag_offset, struct bcm_tag *buf)
-+{
-+      int ret;
-+      size_t retlen;
-+      u32 computed_crc;
-+
-+      ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
-+      if (ret)
-+              return ret;
-+
-+      if (retlen != sizeof(*buf))
-+              return -EIO;
-+
-+      computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
-+                              offsetof(struct bcm_tag, header_crc));
-+      if (computed_crc == buf->header_crc) {
-+              STR_NULL_TERMINATE(buf->board_id);
-+              STR_NULL_TERMINATE(buf->tag_version);
-+
-+              pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
-+                      name, tag_offset, buf->tag_version, buf->board_id);
-+
-+              return 0;
-+      }
-+
-+      pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
-+              name, tag_offset, buf->header_crc, computed_crc);
-+      return -EINVAL;
-+}
-+
-+static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master,
-+                                      const struct mtd_partition **pparts,
-+                                      struct mtd_part_parser_data *data)
-+{
-+      /* CFE, NVRAM and global Linux are always present */
-+      int nrparts = 0, curpart = 0;
-+      struct bcm_tag *buf = NULL;
-+      struct mtd_partition *parts;
-+      int ret;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr, offset;
-+      unsigned int rootfslen, kernellen, sparelen, totallen;
-+      int i;
-+      bool rootfs_first = false;
-+
-+      buf = vmalloc(sizeof(struct bcm_tag));
-+      if (!buf)
-+              return -ENOMEM;
-+
-+      /* Get the tag */
-+      ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf);
-+      if (!ret) {
-+              STR_NULL_TERMINATE(buf->flash_image_start);
-+              if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
-+                              rootfsaddr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid rootfs address: %*ph\n",
-+                              (int)sizeof(buf->flash_image_start),
-+                              buf->flash_image_start);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_address);
-+              if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
-+                              kerneladdr < BCM963XX_EXTENDED_SIZE) {
-+                      pr_err("invalid kernel address: %*ph\n",
-+                              (int)sizeof(buf->kernel_address),
-+                              buf->kernel_address);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->kernel_length);
-+              if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
-+                      pr_err("invalid kernel length: %*ph\n",
-+                              (int)sizeof(buf->kernel_length),
-+                              buf->kernel_length);
-+                      goto out;
-+              }
-+
-+              STR_NULL_TERMINATE(buf->total_length);
-+              if (kstrtouint(buf->total_length, 10, &totallen)) {
-+                      pr_err("invalid total length: %*ph\n",
-+                              (int)sizeof(buf->total_length),
-+                              buf->total_length);
-+                      goto out;
-+              }
-+
-+              /*
-+               * Addresses are flash absolute, so convert to partition
-+               * relative addresses. Assume either kernel or rootfs will
-+               * directly follow the image tag.
-+               */
-+              if (rootfsaddr < kerneladdr)
-+                      offset = rootfsaddr - sizeof(struct bcm_tag);
-+              else
-+                      offset = kerneladdr - sizeof(struct bcm_tag);
-+
-+              kerneladdr = kerneladdr - offset;
-+              rootfsaddr = rootfsaddr - offset;
-+              spareaddr = roundup(totallen, master->erasesize);
-+
-+              if (rootfsaddr < kerneladdr) {
-+                      /* default Broadcom layout */
-+                      rootfslen = kerneladdr - rootfsaddr;
-+                      rootfs_first = true;
-+              } else {
-+                      /* OpenWrt layout */
-+                      rootfsaddr = kerneladdr + kernellen;
-+                      rootfslen = spareaddr - rootfsaddr;
-+              }
-+      } else {
-+              goto out;
-+      }
-+      sparelen = master->size - spareaddr;
-+
-+      /* Determine number of partitions */
-+      if (rootfslen > 0)
-+              nrparts++;
-+
-+      if (kernellen > 0)
-+              nrparts++;
-+
-+      parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-+      if (!parts) {
-+              ret = -ENOMEM;
-+              goto out;
-+      }
-+
-+      /* Start building partition list */
-+      if (kernellen > 0) {
-+              int kernelpart = curpart;
-+
-+              if (rootfslen > 0 && rootfs_first)
-+                      kernelpart++;
-+              parts[kernelpart].name = "kernel";
-+              parts[kernelpart].offset = kerneladdr;
-+              parts[kernelpart].size = kernellen;
-+              curpart++;
-+      }
-+
-+      if (rootfslen > 0) {
-+              int rootfspart = curpart;
-+
-+              if (kernellen > 0 && rootfs_first)
-+                      rootfspart--;
-+              parts[rootfspart].name = "rootfs";
-+              parts[rootfspart].offset = rootfsaddr;
-+              parts[rootfspart].size = rootfslen;
-+              if (sparelen > 0  && !rootfs_first)
-+                      parts[rootfspart].size += sparelen;
-+              curpart++;
-+      }
-+
-+      for (i = 0; i < nrparts; i++)
-+              pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-+                      parts[i].name, parts[i].offset, parts[i].size);
-+
-+      pr_info("Spare partition is offset %x and length %x\n", spareaddr,
-+              sparelen);
-+
-+      *pparts = parts;
-+      ret = 0;
-+
-+out:
-+      vfree(buf);
-+
-+      if (ret)
-+              return ret;
-+
-+      return nrparts;
-+}
-+
-+static struct mtd_part_parser bcm963xx_imagetag_parser = {
-+      .parse_fn = bcm963xx_parse_imagetag_partitions,
-+      .name = "bcm963xx-imagetag",
-+};
-+module_mtd_part_parser(bcm963xx_imagetag_parser);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Daniel Dickinson <openwrt@cshore.neomailbox.net>");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com");
-+MODULE_DESCRIPTION("MTD parser for BCM963XX CFE Image Tag partitions");
diff --git a/target/linux/brcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch b/target/linux/brcm63xx/patches-4.19/122-mtd-bcm63xxpart-add-of_match_table.patch
deleted file mode 100644 (file)
index 9b3f2c4..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 89cd5efa4a0d342b860a726bb1d382e4db4b96a4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:34:42 +0200
-Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -34,6 +34,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -172,9 +173,16 @@ out:
-       return ret;
- };
-+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
-+
- static struct mtd_part_parser bcm63xx_cfe_parser = {
-       .parse_fn = bcm63xx_parse_cfe_partitions,
-       .name = "bcm63xxpart",
-+      .of_match_table = parse_bcm63xx_cfe_match_table,
- };
- module_mtd_part_parser(bcm63xx_cfe_parser);
diff --git a/target/linux/brcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/brcm63xx/patches-4.19/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch
deleted file mode 100644 (file)
index 04978b3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 28 Jun 2017 18:37:12 +0200
-Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -24,6 +24,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- /* Ensure strings read from flash structs are null terminated */
- #define STR_NULL_TERMINATE(x) \
-@@ -200,9 +201,16 @@ out:
-       return nrparts;
- }
-+static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = {
-+      { .compatible = "brcm,bcm963xx-imagetag" },
-+      {},
-+};
-+MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table);
-+
- static struct mtd_part_parser bcm963xx_imagetag_parser = {
-       .parse_fn = bcm963xx_parse_imagetag_partitions,
-       .name = "bcm963xx-imagetag",
-+      .of_match_table = parse_bcm963xx_imagetag_match_table,
- };
- module_mtd_part_parser(bcm963xx_imagetag_parser);
diff --git a/target/linux/brcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/brcm63xx/patches-4.19/130-pinctrl-add-bcm63xx-base-code.patch
deleted file mode 100644 (file)
index 19ea476..0000000
+++ /dev/null
@@ -1,226 +0,0 @@
-From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:07:42 +0200
-Subject: [PATCH 01/13] pinctrl: add bcm63xx base code
-
-Setup directory and add a helper for bcm63xx pinctrl support.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/Kconfig                   |   1 +
- drivers/pinctrl/Makefile                  |   1 +
- drivers/pinctrl/bcm63xx/Kconfig           |   3 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++
- drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h |  14 +++
- 7 files changed, 163 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/Kconfig
- create mode 100644 drivers/pinctrl/bcm63xx/Makefile
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -341,6 +341,7 @@ config PINCTRL_OCELOT
- source "drivers/pinctrl/actions/Kconfig"
- source "drivers/pinctrl/aspeed/Kconfig"
- source "drivers/pinctrl/bcm/Kconfig"
-+source "drivers/pinctrl/bcm63xx/Kconfig"
- source "drivers/pinctrl/berlin/Kconfig"
- source "drivers/pinctrl/freescale/Kconfig"
- source "drivers/pinctrl/intel/Kconfig"
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-
- obj-y                         += actions/
- obj-$(CONFIG_ARCH_ASPEED)     += aspeed/
- obj-y                         += bcm/
-+obj-y                         += bcm63xx/
- obj-$(CONFIG_PINCTRL_BERLIN)  += berlin/
- obj-y                         += freescale/
- obj-$(CONFIG_X86)             += intel/
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -0,0 +1,3 @@
-+config PINCTRL_BCM63XX
-+      bool
-+      select GPIO_GENERIC
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/device.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of_irq.h>
-+
-+#include "pinctrl-bcm63xx.h"
-+#include "../core.h"
-+
-+#define BANK_SIZE     sizeof(u32)
-+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
-+
-+#ifdef CONFIG_OF
-+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc,
-+                               const struct of_phandle_args *gpiospec,
-+                               u32 *flags)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(gc);
-+      int pin = gpiospec->args[0];
-+
-+      if (gc != &base[pin / PINS_PER_BANK])
-+              return -EINVAL;
-+
-+      pin = pin % PINS_PER_BANK;
-+
-+      if (pin >= gc->ngpio)
-+              return -EINVAL;
-+
-+      if (flags)
-+              *flags = gpiospec->args[1];
-+
-+      return pin;
-+}
-+#endif
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      struct gpio_chip *base = gpiochip_get_data(chip);
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      /* FIXME: this is ugly */
-+      sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base));
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc,
-+                            void __iomem *dirout, void __iomem *data,
-+                            size_t sz, int ngpio)
-+
-+{
-+      int banks, chips, i, ret = -EINVAL;
-+
-+      chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+      banks = sz / BANK_SIZE;
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+              int reg_offset;
-+              char *label;
-+
-+              label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i);
-+              if (!label)
-+                      return -ENOMEM;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              /* the registers are treated like a huge big endian register */
-+              reg_offset = (banks - i - 1) * BANK_SIZE;
-+
-+              ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset,
-+                               NULL, NULL, dirout + reg_offset, NULL,
-+                               BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+              if (ret)
-+                      return ret;
-+
-+              gc[i].request = gpiochip_generic_request;
-+              gc[i].free = gpiochip_generic_free;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc[i].to_irq = bcm63xx_gpio_to_irq;
-+
-+#ifdef CONFIG_OF
-+              gc[i].of_gpio_n_cells = 2;
-+              gc[i].of_xlate = bcm63xx_gpio_of_xlate;
-+#endif
-+
-+              gc[i].label = label;
-+              gc[i].ngpio = pins;
-+
-+              devm_gpiochip_add_data(dev, &gc[i], gc);
-+      }
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name,
-+                                  int ngpio)
-+{
-+      int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK);
-+
-+      for (i = 0; i < chips; i++) {
-+              int offset, pins;
-+
-+              offset = i * PINS_PER_BANK;
-+              pins = min_t(int, ngpio - offset, PINS_PER_BANK);
-+
-+              gpiochip_add_pin_range(&gc[i], name, 0, offset, pins);
-+      }
-+}
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio)
-+{
-+      struct pinctrl_dev *pctldev;
-+      struct resource *res;
-+      void __iomem *dirout, *data;
-+      size_t sz;
-+      int ret;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout");
-+      dirout = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(dirout))
-+              return ERR_CAST(dirout);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
-+      data = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(data))
-+              return ERR_CAST(data);
-+
-+      sz = resource_size(res);
-+
-+      ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio);
-+      if (ret)
-+              return ERR_PTR(ret);
-+
-+      pctldev = devm_pinctrl_register(&pdev->dev, desc, priv);
-+      if (IS_ERR(pctldev))
-+              return pctldev;
-+
-+      bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio);
-+
-+      dev_info(&pdev->dev, "registered at mmio %p\n", dirout);
-+
-+      return pctldev;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h
-@@ -0,0 +1,14 @@
-+#ifndef __PINCTRL_BCM63XX
-+#define __PINCTRL_BCM63XX
-+
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/platform_device.h>
-+
-+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev,
-+                                           struct pinctrl_desc *desc,
-+                                           void *priv, struct gpio_chip *gc,
-+                                           int ngpio);
-+
-+#endif
diff --git a/target/linux/brcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 3a2a781..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:33:56 +0200
-Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6328 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt      | 61 ++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt
-@@ -0,0 +1,61 @@
-+* Broadcom BCM6328 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6328-pinctrl".
-+- reg: Register specifies of dirout, dat, mode, mux registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6328-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0xc>;
-+      reg-names = "dirout", "dat", "mode", "mux";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led
-+gpio1         1       led
-+gpio2         2       led
-+gpio3         3       led
-+gpio4         4       led
-+gpio5         5       led
-+gpio6         6       led, serial_led_data
-+gpio7         7       led, serial_led_clk
-+gpio8         8       led
-+gpio9         9       led
-+gpio10                10      led
-+gpio11                11      led
-+gpio12                12      led
-+gpio13                13      led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led, pcie_clkreq
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      ephy0_act_led
-+gpio26                26      ephy1_act_led
-+gpio27                27      ephy2_act_led
-+gpio28                28      ephy3_act_led
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+hsspi_cs1     -       hsspi_cs1
-+usb_port1     -       usb_host_port, usb_device_port
diff --git a/target/linux/brcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/brcm63xx/patches-4.19/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch
deleted file mode 100644 (file)
index 3c5f15b..0000000
+++ /dev/null
@@ -1,495 +0,0 @@
-From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:12:50 +0200
-Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328
-
-Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
-GPIOs, as LEDs for the integrated LED controller, or various other
-functions. Its pincontrol mux registers also control other aspects, like
-switching the second USB port between host and device mode.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++
- 3 files changed, 464 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -1,3 +1,10 @@
- config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+
-+config PINCTRL_BCM6328
-+      bool "BCM6328 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c
-@@ -0,0 +1,456 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6328_MUX_LO_REG    0x4
-+#define BCM6328_MUX_HI_REG    0x0
-+#define BCM6328_MUX_OTHER_REG 0x8
-+
-+#define BCM6328_NGPIO         32
-+
-+struct bcm6328_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6328_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6328_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio;
-+};
-+
-+static const struct pinctrl_pin_desc bcm6328_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+
-+      /*
-+       * No idea where they really are; so let's put them according
-+       * to their mux offsets.
-+       */
-+      PINCTRL_PIN(36, "hsspi_cs1"),
-+      PINCTRL_PIN(38, "usb_p2"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+
-+static unsigned hsspi_cs1_pins[] = { 36 };
-+static unsigned usb_port1_pins[] = { 38 };
-+
-+#define BCM6328_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6328_pingroup bcm6328_groups[] = {
-+      BCM6328_GROUP(gpio0),
-+      BCM6328_GROUP(gpio1),
-+      BCM6328_GROUP(gpio2),
-+      BCM6328_GROUP(gpio3),
-+      BCM6328_GROUP(gpio4),
-+      BCM6328_GROUP(gpio5),
-+      BCM6328_GROUP(gpio6),
-+      BCM6328_GROUP(gpio7),
-+      BCM6328_GROUP(gpio8),
-+      BCM6328_GROUP(gpio9),
-+      BCM6328_GROUP(gpio10),
-+      BCM6328_GROUP(gpio11),
-+      BCM6328_GROUP(gpio12),
-+      BCM6328_GROUP(gpio13),
-+      BCM6328_GROUP(gpio14),
-+      BCM6328_GROUP(gpio15),
-+      BCM6328_GROUP(gpio16),
-+      BCM6328_GROUP(gpio17),
-+      BCM6328_GROUP(gpio18),
-+      BCM6328_GROUP(gpio19),
-+      BCM6328_GROUP(gpio20),
-+      BCM6328_GROUP(gpio21),
-+      BCM6328_GROUP(gpio22),
-+      BCM6328_GROUP(gpio23),
-+      BCM6328_GROUP(gpio24),
-+      BCM6328_GROUP(gpio25),
-+      BCM6328_GROUP(gpio26),
-+      BCM6328_GROUP(gpio27),
-+      BCM6328_GROUP(gpio28),
-+      BCM6328_GROUP(gpio29),
-+      BCM6328_GROUP(gpio30),
-+      BCM6328_GROUP(gpio31),
-+
-+      BCM6328_GROUP(hsspi_cs1),
-+      BCM6328_GROUP(usb_port1),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const pcie_clkreq_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const hsspi_cs1_groups[] = {
-+      "hsspi_cs1"
-+};
-+
-+static const char * const usb_host_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+static const char * const usb_device_port_groups[] = {
-+      "usb_port1",
-+};
-+
-+#define BCM6328_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6328_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6328_function bcm6328_funcs[] = {
-+      BCM6328_MODE_FUN(led),
-+      BCM6328_MUX_FUN(serial_led_data, 2),
-+      BCM6328_MUX_FUN(serial_led_clk, 2),
-+      BCM6328_MUX_FUN(inet_act_led, 1),
-+      BCM6328_MUX_FUN(pcie_clkreq, 2),
-+      BCM6328_MUX_FUN(ephy0_act_led, 1),
-+      BCM6328_MUX_FUN(ephy1_act_led, 1),
-+      BCM6328_MUX_FUN(ephy2_act_led, 1),
-+      BCM6328_MUX_FUN(ephy3_act_led, 1),
-+      BCM6328_MUX_FUN(hsspi_cs1, 2),
-+      BCM6328_MUX_FUN(usb_host_port, 1),
-+      BCM6328_MUX_FUN(usb_device_port, 2),
-+};
-+
-+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_groups);
-+}
-+
-+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6328_groups[group].name;
-+}
-+
-+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6328_groups[group].pins;
-+      *num_pins = bcm6328_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6328_funcs);
-+}
-+
-+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6328_funcs[selector].name;
-+}
-+
-+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6328_funcs[selector].groups;
-+      *num_groups = bcm6328_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      reg = __raw_readl(pctl->mux[pin / 16]);
-+      reg &= ~(3UL << ((pin % 16) * 2));
-+      reg |= mux << ((pin % 16) * 2);
-+      __raw_writel(reg, pctl->mux[pin / 16]);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6328_pingroup *grp = &bcm6328_groups[group];
-+      const struct bcm6328_function *f = &bcm6328_funcs[selector];
-+
-+      bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6328_rmw_mux(pctl, offset, 0, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6328_pctl_ops = {
-+      .get_groups_count       = bcm6328_pinctrl_get_group_count,
-+      .get_group_name         = bcm6328_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6328_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6328_pmx_ops = {
-+      .get_functions_count    = bcm6328_pinctrl_get_func_count,
-+      .get_function_name      = bcm6328_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6328_pinctrl_get_groups,
-+      .set_mux                = bcm6328_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6328_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6328_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+      pctl->mux[0] = mux + BCM6328_MUX_LO_REG;
-+      pctl->mux[1] = mux + BCM6328_MUX_HI_REG;
-+      pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6328_pctl_ops;
-+      pctl->desc.pmxops = &bcm6328_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6328_pins);
-+      pctl->desc.pins = bcm6328_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               &pctl->gpio, BCM6328_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6328_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6328-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6328_pinctrl_driver = {
-+      .probe = bcm6328_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6328-pinctrl",
-+              .of_match_table = bcm6328_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6328_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 6bac903..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
-From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:35:45 +0200
-Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6348 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt      | 32 ++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt
-@@ -0,0 +1,32 @@
-+* Broadcom BCM6348 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6348-pinctrl".
-+- reg: register Specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6348-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat", "mode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+group0                32-36   ext_mii, utopia, diag
-+group1                22-31   ext_ephy, mii_snoop, mii_pccard,
-+                      spi_master_uart, utopia, diag
-+group2                16-21   pci, diag
-+group3                8-15    ext_mii, utopia
-+group4                0-7     ext_ephy, mii_snoop, legacy_led, diag
diff --git a/target/linux/brcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/brcm63xx/patches-4.19/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch
deleted file mode 100644 (file)
index b48723c..0000000
+++ /dev/null
@@ -1,431 +0,0 @@
-From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:14:13 +0200
-Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348
-
-Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of
-up to ten gpios into fourteen potential functions. It does not allow
-muxing individual pins. Some functions require more than one group to be
-muxed to the same function.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++
- 3 files changed, 399 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -8,3 +8,10 @@ config PINCTRL_BCM6328
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6348
-+      bool "BCM6348 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
-+obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c
-@@ -0,0 +1,391 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/machine.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6348_NGPIO         37
-+
-+#define MAX_GROUP             4
-+#define PINS_PER_GROUP                8
-+#define PIN_TO_GROUP(pin)     (MAX_GROUP - ((pin) / PINS_PER_GROUP))
-+#define GROUP_SHIFT(pin)      (PIN_TO_GROUP(pin) * 4)
-+#define GROUP_MASK(pin)               (0xf << GROUP_SHIFT(pin))
-+
-+struct bcm6348_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6348_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+      unsigned int value;
-+};
-+
-+struct bcm6348_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6348_PIN(a, b, group)              \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(group),    \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6348_pins[] = {
-+      BCM6348_PIN(0, "gpio0", 4),
-+      BCM6348_PIN(1, "gpio1", 4),
-+      BCM6348_PIN(2, "gpio2", 4),
-+      BCM6348_PIN(3, "gpio3", 4),
-+      BCM6348_PIN(4, "gpio4", 4),
-+      BCM6348_PIN(5, "gpio5", 4),
-+      BCM6348_PIN(6, "gpio6", 4),
-+      BCM6348_PIN(7, "gpio7", 4),
-+      BCM6348_PIN(8, "gpio8", 3),
-+      BCM6348_PIN(9, "gpio9", 3),
-+      BCM6348_PIN(10, "gpio10", 3),
-+      BCM6348_PIN(11, "gpio11", 3),
-+      BCM6348_PIN(12, "gpio12", 3),
-+      BCM6348_PIN(13, "gpio13", 3),
-+      BCM6348_PIN(14, "gpio14", 3),
-+      BCM6348_PIN(15, "gpio15", 3),
-+      BCM6348_PIN(16, "gpio16", 2),
-+      BCM6348_PIN(17, "gpio17", 2),
-+      BCM6348_PIN(18, "gpio18", 2),
-+      BCM6348_PIN(19, "gpio19", 2),
-+      BCM6348_PIN(20, "gpio20", 2),
-+      BCM6348_PIN(21, "gpio21", 2),
-+      BCM6348_PIN(22, "gpio22", 1),
-+      BCM6348_PIN(23, "gpio23", 1),
-+      BCM6348_PIN(24, "gpio24", 1),
-+      BCM6348_PIN(25, "gpio25", 1),
-+      BCM6348_PIN(26, "gpio26", 1),
-+      BCM6348_PIN(27, "gpio27", 1),
-+      BCM6348_PIN(28, "gpio28", 1),
-+      BCM6348_PIN(29, "gpio29", 1),
-+      BCM6348_PIN(30, "gpio30", 1),
-+      BCM6348_PIN(31, "gpio31", 1),
-+      BCM6348_PIN(32, "gpio32", 0),
-+      BCM6348_PIN(33, "gpio33", 0),
-+      BCM6348_PIN(34, "gpio34", 0),
-+      BCM6348_PIN(35, "gpio35", 0),
-+      BCM6348_PIN(36, "gpio36", 0),
-+};
-+
-+enum bcm6348_muxes {
-+      BCM6348_MUX_GPIO = 0,
-+      BCM6348_MUX_EXT_EPHY,
-+      BCM6348_MUX_MII_SNOOP,
-+      BCM6348_MUX_LEGACY_LED,
-+      BCM6348_MUX_MII_PCCARD,
-+      BCM6348_MUX_PCI,
-+      BCM6348_MUX_SPI_MASTER_UART,
-+      BCM6348_MUX_EXT_MII,
-+      BCM6348_MUX_UTOPIA,
-+      BCM6348_MUX_DIAG,
-+};
-+
-+static unsigned group0_pins[] = {
-+      32, 33, 34, 35, 36,
-+};
-+
-+static unsigned group1_pins[] = {
-+      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned group2_pins[] = {
-+      16, 17, 18, 19, 20, 21,
-+};
-+
-+static unsigned group3_pins[] = {
-+      8, 9, 10, 11, 12, 13, 14, 15,
-+};
-+
-+static unsigned group4_pins[] = {
-+      0, 1, 2, 3, 4, 5, 6, 7,
-+};
-+
-+#define BCM6348_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      } \
-+
-+static struct bcm6348_pingroup bcm6348_groups[] = {
-+      BCM6348_GROUP(group0),
-+      BCM6348_GROUP(group1),
-+      BCM6348_GROUP(group2),
-+      BCM6348_GROUP(group3),
-+      BCM6348_GROUP(group4),
-+};
-+
-+static const char * const ext_mii_groups[] = {
-+      "group0",
-+      "group3",
-+};
-+
-+static const char * const ext_ephy_groups[] = {
-+      "group1",
-+      "group4"
-+};
-+
-+static const char * const mii_snoop_groups[] = {
-+      "group1",
-+      "group4",
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "group4",
-+};
-+
-+static const char * const mii_pccard_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const pci_groups[] = {
-+      "group2",
-+};
-+
-+static const char * const spi_master_uart_groups[] = {
-+      "group1",
-+};
-+
-+static const char * const utopia_groups[] = {
-+      "group0",
-+      "group1",
-+      "group3",
-+};
-+
-+static const char * const diag_groups[] = {
-+      "group0",
-+      "group1",
-+      "group2",
-+      "group4",
-+};
-+
-+#define BCM6348_FUN(n, f)                             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .value = BCM6348_MUX_##f,               \
-+      }
-+
-+static const struct bcm6348_function bcm6348_funcs[] = {
-+      BCM6348_FUN(ext_mii, EXT_MII),
-+      BCM6348_FUN(ext_ephy, EXT_EPHY),
-+      BCM6348_FUN(mii_snoop, MII_SNOOP),
-+      BCM6348_FUN(legacy_led, LEGACY_LED),
-+      BCM6348_FUN(mii_pccard, MII_PCCARD),
-+      BCM6348_FUN(pci, PCI),
-+      BCM6348_FUN(spi_master_uart, SPI_MASTER_UART),
-+      BCM6348_FUN(utopia, UTOPIA),
-+      BCM6348_FUN(diag, DIAG),
-+};
-+
-+static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_groups);
-+}
-+
-+static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6348_groups[group].name;
-+}
-+
-+static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6348_groups[group].pins;
-+      *num_pins = bcm6348_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6348_funcs);
-+}
-+
-+static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6348_funcs[selector].name;
-+}
-+
-+static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6348_funcs[selector].groups;
-+      *num_groups = bcm6348_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+
-+      reg = __raw_readl(pctl->mode);
-+      reg &= ~mask;
-+      reg |= val & mask;
-+      __raw_writel(reg, pctl->mode);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6348_pingroup *grp = &bcm6348_groups[group];
-+      const struct bcm6348_function *f = &bcm6348_funcs[selector];
-+      u32 mask, val;
-+
-+      /*
-+       * pins n..(n+7) share the same group, so we only need to look at
-+       * the first pin.
-+       */
-+      mask = GROUP_MASK(grp->pins[0]);
-+      val = f->value << GROUP_SHIFT(grp->pins[0]);
-+
-+      bcm6348_rmw_mux(pctl, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      struct pin_desc *desc;
-+      u32 mask;
-+
-+      /* don't reconfigure if already muxed */
-+      desc = pin_desc_get(pctldev, offset);
-+      if (desc->mux_usecount)
-+              return 0;
-+
-+      mask = GROUP_MASK(offset);
-+
-+      /* disable all functions using this pin */
-+      bcm6348_rmw_mux(pctl, mask, 0);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6348_pctl_ops = {
-+      .get_groups_count       = bcm6348_pinctrl_get_group_count,
-+      .get_group_name         = bcm6348_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6348_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6348_pmx_ops = {
-+      .get_functions_count    = bcm6348_pinctrl_get_func_count,
-+      .get_function_name      = bcm6348_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6348_pinctrl_get_groups,
-+      .set_mux                = bcm6348_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6348_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6348_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6348_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6348_pctl_ops;
-+      pctl->desc.pmxops = &bcm6348_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6348_pins);
-+      pctl->desc.pins = bcm6348_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6348_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6348_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6348-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6348_pinctrl_driver = {
-+      .probe = bcm6348_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6348-pinctrl",
-+              .of_match_table = bcm6348_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6348_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e8a7479..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:00 +0200
-Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6358 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt      | 44 ++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt
-@@ -0,0 +1,44 @@
-+* Broadcom BCM6358 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6358-pinctrl".
-+- reg: Register specifiers of dirout, dat registers.
-+- reg-names: Must be "dirout", "dat".
-+- brcm,gpiomode: Phandle to the shared gpiomode register.
-+- gpio-controller: Identifies this node as a gpio-controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@fffe0080 {
-+      compatible = "brcm,bcm6358-pinctrl";
-+      reg = <0xfffe0080 0x8>,
-+            <0xfffe0088 0x8>,
-+            <0xfffe0098 0x4>;
-+      reg-names = "dirout", "dat";
-+      brcm,gpiomode = <&gpiomode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiomode: syscon@fffe0098 {
-+      compatible = "brcm,bcm6358-gpiomode", "syscon";
-+      reg = <0xfffe0098 0x4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+ebi_cs_grp    30-31           ebi_cs
-+uart1_grp     28-31           uart1
-+spi_cs_grp    32-33           spi_cs
-+async_modem_grp       12-15           async_modem
-+legacy_led_grp        9-15            legacy_led
-+serial_led_grp        6-7             serial_led
-+led_grp               0-3             led
-+utopia_grp    12-15, 22-31    utopia
-+pwm_syn_clk_grp       8               pwm_syn_clk
-+sys_irq_grp   5               sys_irq
diff --git a/target/linux/brcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/brcm63xx/patches-4.19/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch
deleted file mode 100644 (file)
index 87dc741..0000000
+++ /dev/null
@@ -1,436 +0,0 @@
-From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:16:01 +0200
-Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
-
-Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
-functions onto the GPIO pins. It does not support configuring individual
-pins but only whole groups. These groups may overlap, and still require
-the directions to be set correctly in the GPIO register. In addition the
-functions register controls other, not directly mux related functions.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   8 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
- 3 files changed, 402 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -15,3 +15,11 @@ config PINCTRL_BCM6348
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6358
-+      bool "BCM6358 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
-+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
-@@ -0,0 +1,393 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+/* GPIO_MODE register */
-+#define BCM6358_MODE_MUX_NONE         0
-+
-+/* overlays on gpio pins */
-+#define BCM6358_MODE_MUX_EBI_CS               BIT(5)
-+#define BCM6358_MODE_MUX_UART1                BIT(6)
-+#define BCM6358_MODE_MUX_SPI_CS               BIT(7)
-+#define BCM6358_MODE_MUX_ASYNC_MODEM  BIT(8)
-+#define BCM6358_MODE_MUX_LEGACY_LED   BIT(9)
-+#define BCM6358_MODE_MUX_SERIAL_LED   BIT(10)
-+#define BCM6358_MODE_MUX_LED          BIT(11)
-+#define BCM6358_MODE_MUX_UTOPIA               BIT(12)
-+#define BCM6358_MODE_MUX_CLKRST               BIT(13)
-+#define BCM6358_MODE_MUX_PWM_SYN_CLK  BIT(14)
-+#define BCM6358_MODE_MUX_SYS_IRQ      BIT(15)
-+
-+#define BCM6358_NGPIO                 40
-+
-+struct bcm6358_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+
-+      const u16 mode_val;
-+
-+      /* non-GPIO function muxes require the gpio direction to be set */
-+      const u16 direction;
-+};
-+
-+struct bcm6358_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+};
-+
-+struct bcm6358_pinctrl {
-+      struct device *dev;
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      struct regmap_field *overlays;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3)              \
-+      {                                                       \
-+              .number = a,                                    \
-+              .name = b,                                      \
-+              .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 |  \
-+                                   BCM6358_MODE_MUX_##bit2 |  \
-+                                   BCM6358_MODE_MUX_##bit3),  \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6358_pins[] = {
-+      BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
-+      PINCTRL_PIN(4, "gpio4"),
-+      BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
-+      BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
-+      BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
-+      BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
-+      BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
-+      BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
-+      BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
-+      BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+};
-+
-+static unsigned ebi_cs_grp_pins[] = { 30, 31 };
-+
-+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
-+
-+static unsigned spi_cs_grp_pins[] = { 32, 33 };
-+
-+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
-+
-+static unsigned serial_led_grp_pins[] = { 6, 7 };
-+
-+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
-+
-+static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
-+
-+static unsigned utopia_grp_pins[] = {
-+      12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned pwm_syn_clk_grp_pins[] = { 8 };
-+
-+static unsigned sys_irq_grp_pins[] = { 5 };
-+
-+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir)                   \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+              .mode_val = BCM6358_MODE_MUX_##bit,             \
-+              .direction = dir,                               \
-+      }
-+
-+static const struct bcm6358_pingroup bcm6358_groups[] = {
-+      BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
-+      BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
-+      BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
-+      BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
-+      BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
-+      BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
-+      BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
-+      BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
-+};
-+
-+static const char * const ebi_cs_groups[] = {
-+      "ebi_cs_grp"
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp"
-+};
-+
-+static const char * const spi_cs_2_3_groups[] = {
-+      "spi_cs_2_3_grp"
-+};
-+
-+static const char * const async_modem_groups[] = {
-+      "async_modem_grp"
-+};
-+
-+static const char * const legacy_led_groups[] = {
-+      "legacy_led_grp",
-+};
-+
-+static const char * const serial_led_groups[] = {
-+      "serial_led_grp",
-+};
-+
-+static const char * const led_groups[] = {
-+      "led_grp",
-+};
-+
-+static const char * const clkrst_groups[] = {
-+      "clkrst_grp",
-+};
-+
-+static const char * const pwm_syn_clk_groups[] = {
-+      "pwm_syn_clk_grp",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "sys_irq_grp",
-+};
-+
-+#define BCM6358_FUN(n)                                        \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+      }
-+
-+static const struct bcm6358_function bcm6358_funcs[] = {
-+      BCM6358_FUN(ebi_cs),
-+      BCM6358_FUN(uart1),
-+      BCM6358_FUN(spi_cs_2_3),
-+      BCM6358_FUN(async_modem),
-+      BCM6358_FUN(legacy_led),
-+      BCM6358_FUN(serial_led),
-+      BCM6358_FUN(led),
-+      BCM6358_FUN(clkrst),
-+      BCM6358_FUN(pwm_syn_clk),
-+      BCM6358_FUN(sys_irq),
-+};
-+
-+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_groups);
-+}
-+
-+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6358_groups[group].name;
-+}
-+
-+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6358_groups[group].pins;
-+      *num_pins = bcm6358_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6358_funcs);
-+}
-+
-+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6358_funcs[selector].name;
-+}
-+
-+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6358_funcs[selector].groups;
-+      *num_groups = bcm6358_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
-+      u32 val = grp->mode_val;
-+      u32 mask = val;
-+      unsigned pin;
-+
-+      for (pin = 0; pin < grp->num_pins; pin++)
-+              mask |= (unsigned long)bcm6358_pins[pin].drv_data;
-+
-+      regmap_field_update_bits(pctl->overlays, mask, val);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6358_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (grp->direction & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      u32 mask;
-+
-+      mask = (unsigned long)bcm6358_pins[offset].drv_data;
-+      if (!mask)
-+              return 0;
-+
-+      /* disable all functions using this pin */
-+      return regmap_field_update_bits(pctl->overlays, mask, 0);
-+}
-+
-+static struct pinctrl_ops bcm6358_pctl_ops = {
-+      .get_groups_count       = bcm6358_pinctrl_get_group_count,
-+      .get_group_name         = bcm6358_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6358_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6358_pmx_ops = {
-+      .get_functions_count    = bcm6358_pinctrl_get_func_count,
-+      .get_function_name      = bcm6358_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6358_pinctrl_get_groups,
-+      .set_mux                = bcm6358_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6358_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6358_pinctrl *pctl;
-+      struct regmap *mode;
-+      struct reg_field overlays = REG_FIELD(0, 0, 15);
-+
-+      if (pdev->dev.of_node)
-+              mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                     "brcm,gpiomode");
-+      else
-+              mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
-+
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
-+      if (IS_ERR(pctl->overlays))
-+              return PTR_ERR(pctl->overlays);
-+
-+      /* disable all muxes by default */
-+      regmap_field_write(pctl->overlays, 0);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6358_pctl_ops;
-+      pctl->desc.pmxops = &bcm6358_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
-+      pctl->desc.pins = bcm6358_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6358_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6358_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6358-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6358_pinctrl_driver = {
-+      .probe = bcm6358_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6358-pinctrl",
-+              .of_match_table = bcm6358_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6358_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 9fc424c..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:18 +0200
-Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6362 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6362 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl"
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6362-pinctrl";
-+      reg = <0x10000080 0x8>,
-+            <0x10000088 0x8>,
-+            <0x10000090 0x4>,
-+            <0x10000098 0x4>,
-+            <0x1000009c 0x4>,
-+            <0x100000b8 0x4>;
-+      reg-names = "dirout", "dat", "led",
-+                  "mode", "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, usb_device_led
-+gpio1         1               led, sys_irq
-+gpio2         2               led, serial_led_clk
-+gpio3         3               led, serial_led_data
-+gpio4         4               led, robosw_led_data
-+gpio5         5               led, robosw_led_clk
-+gpio6         6               led, robosw_led0
-+gpio7         7               led, robosw_led1
-+gpio8         8               led, inet_led
-+gpio9         9               led, spi_cs2
-+gpio10                10              led, spi_cs3
-+gpio11                11              led, ntr_pulse
-+gpio12                12              led, uart1_scts
-+gpio13                13              led, uart1_srts
-+gpio14                14              led, uart1_sdin
-+gpio15                15              led, uart1_sdout
-+gpio16                16              led, adsl_spi_miso
-+gpio17                17              led, adsl_spi_mosi
-+gpio18                18              led, adsl_spi_clk
-+gpio19                19              led, adsl_spi_cs
-+gpio20                20              led, ephy0_led
-+gpio21                21              led, ephy1_led
-+gpio22                22              led, ephy2_led
-+gpio23                23              led, ephy3_led
-+gpio24                24              ext_irq0
-+gpio25                25              ext_irq1
-+gpio26                26              ext_irq2
-+gpio27                27              ext_irq3
-+gpio28                28              -
-+gpio29                29              -
-+gpio30                30              -
-+gpio31                31              -
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+nand_grp      8, 12-23, 27    nand
diff --git a/target/linux/brcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/brcm63xx/patches-4.19/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch
deleted file mode 100644 (file)
index 726a97f..0000000
+++ /dev/null
@@ -1,733 +0,0 @@
-From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:17:20 +0200
-Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362
-
-Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual
-GPIO pins to the LED controller, to be available by the integrated
-wifi, or other functions. It also supports overlay groups, of which
-only NAND is documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++
- 3 files changed, 700 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -23,3 +23,10 @@ config PINCTRL_BCM6358
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-       select MFD_SYSCON
-+
-+config PINCTRL_BCM6362
-+      bool "BCM6362 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
-+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c
-@@ -0,0 +1,692 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6362_NGPIO 48
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND BIT(2)
-+
-+enum bcm6362_pinctrl_reg {
-+      BCM6362_LEDCTRL,
-+      BCM6362_MODE,
-+      BCM6362_CTRL,
-+      BCM6362_BASEMODE,
-+};
-+
-+struct bcm6362_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6362_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm6362_pinctrl_reg reg;
-+      u32 basemode_mask;
-+};
-+
-+struct bcm6362_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6362_PIN(a, b, mask)                       \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)(mask),     \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6362_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      BCM6362_PIN(8, "gpio8", BASEMODE_NAND),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      BCM6362_PIN(12, "gpio12", BASEMODE_NAND),
-+      BCM6362_PIN(13, "gpio13", BASEMODE_NAND),
-+      BCM6362_PIN(14, "gpio14", BASEMODE_NAND),
-+      BCM6362_PIN(15, "gpio15", BASEMODE_NAND),
-+      BCM6362_PIN(16, "gpio16", BASEMODE_NAND),
-+      BCM6362_PIN(17, "gpio17", BASEMODE_NAND),
-+      BCM6362_PIN(18, "gpio18", BASEMODE_NAND),
-+      BCM6362_PIN(19, "gpio19", BASEMODE_NAND),
-+      BCM6362_PIN(20, "gpio20", BASEMODE_NAND),
-+      BCM6362_PIN(21, "gpio21", BASEMODE_NAND),
-+      BCM6362_PIN(22, "gpio22", BASEMODE_NAND),
-+      BCM6362_PIN(23, "gpio23", BASEMODE_NAND),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      BCM6362_PIN(27, "gpio27", BASEMODE_NAND),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+
-+static unsigned nand_grp_pins[] = {
-+      8, 12, 13, 14, 15, 16, 17,
-+      18, 19, 20, 21, 22, 23, 27,
-+};
-+
-+#define BCM6362_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6362_pingroup bcm6362_groups[] = {
-+      BCM6362_GROUP(gpio0),
-+      BCM6362_GROUP(gpio1),
-+      BCM6362_GROUP(gpio2),
-+      BCM6362_GROUP(gpio3),
-+      BCM6362_GROUP(gpio4),
-+      BCM6362_GROUP(gpio5),
-+      BCM6362_GROUP(gpio6),
-+      BCM6362_GROUP(gpio7),
-+      BCM6362_GROUP(gpio8),
-+      BCM6362_GROUP(gpio9),
-+      BCM6362_GROUP(gpio10),
-+      BCM6362_GROUP(gpio11),
-+      BCM6362_GROUP(gpio12),
-+      BCM6362_GROUP(gpio13),
-+      BCM6362_GROUP(gpio14),
-+      BCM6362_GROUP(gpio15),
-+      BCM6362_GROUP(gpio16),
-+      BCM6362_GROUP(gpio17),
-+      BCM6362_GROUP(gpio18),
-+      BCM6362_GROUP(gpio19),
-+      BCM6362_GROUP(gpio20),
-+      BCM6362_GROUP(gpio21),
-+      BCM6362_GROUP(gpio22),
-+      BCM6362_GROUP(gpio23),
-+      BCM6362_GROUP(gpio24),
-+      BCM6362_GROUP(gpio25),
-+      BCM6362_GROUP(gpio26),
-+      BCM6362_GROUP(gpio27),
-+      BCM6362_GROUP(gpio28),
-+      BCM6362_GROUP(gpio29),
-+      BCM6362_GROUP(gpio30),
-+      BCM6362_GROUP(gpio31),
-+      BCM6362_GROUP(gpio32),
-+      BCM6362_GROUP(gpio33),
-+      BCM6362_GROUP(gpio34),
-+      BCM6362_GROUP(gpio35),
-+      BCM6362_GROUP(gpio36),
-+      BCM6362_GROUP(gpio37),
-+      BCM6362_GROUP(gpio38),
-+      BCM6362_GROUP(gpio39),
-+      BCM6362_GROUP(gpio40),
-+      BCM6362_GROUP(gpio41),
-+      BCM6362_GROUP(gpio42),
-+      BCM6362_GROUP(gpio43),
-+      BCM6362_GROUP(gpio44),
-+      BCM6362_GROUP(gpio45),
-+      BCM6362_GROUP(gpio46),
-+      BCM6362_GROUP(gpio47),
-+      BCM6362_GROUP(nand_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const ntr_pulse_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio15",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const adsl_spi_clk_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_cs_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio21",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const ext_irq0_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const ext_irq1_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ext_irq2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ext_irq3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+#define BCM6362_LED_FUN(n)                            \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_LEDCTRL,                 \
-+      }
-+
-+#define BCM6362_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_MODE,                    \
-+      }
-+
-+#define BCM6362_CTRL_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_CTRL,                    \
-+      }
-+
-+#define BCM6362_BASEMODE_FUN(n, mask)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM6362_BASEMODE,                \
-+              .basemode_mask = (mask),                \
-+      }
-+
-+static const struct bcm6362_function bcm6362_funcs[] = {
-+      BCM6362_LED_FUN(led),
-+      BCM6362_MODE_FUN(usb_device_led),
-+      BCM6362_MODE_FUN(sys_irq),
-+      BCM6362_MODE_FUN(serial_led_clk),
-+      BCM6362_MODE_FUN(serial_led_data),
-+      BCM6362_MODE_FUN(robosw_led_data),
-+      BCM6362_MODE_FUN(robosw_led_clk),
-+      BCM6362_MODE_FUN(robosw_led0),
-+      BCM6362_MODE_FUN(robosw_led1),
-+      BCM6362_MODE_FUN(inet_led),
-+      BCM6362_MODE_FUN(spi_cs2),
-+      BCM6362_MODE_FUN(spi_cs3),
-+      BCM6362_MODE_FUN(ntr_pulse),
-+      BCM6362_MODE_FUN(uart1_scts),
-+      BCM6362_MODE_FUN(uart1_srts),
-+      BCM6362_MODE_FUN(uart1_sdin),
-+      BCM6362_MODE_FUN(uart1_sdout),
-+      BCM6362_MODE_FUN(adsl_spi_miso),
-+      BCM6362_MODE_FUN(adsl_spi_mosi),
-+      BCM6362_MODE_FUN(adsl_spi_clk),
-+      BCM6362_MODE_FUN(adsl_spi_cs),
-+      BCM6362_MODE_FUN(ephy0_led),
-+      BCM6362_MODE_FUN(ephy1_led),
-+      BCM6362_MODE_FUN(ephy2_led),
-+      BCM6362_MODE_FUN(ephy3_led),
-+      BCM6362_MODE_FUN(ext_irq0),
-+      BCM6362_MODE_FUN(ext_irq1),
-+      BCM6362_MODE_FUN(ext_irq2),
-+      BCM6362_MODE_FUN(ext_irq3),
-+      BCM6362_CTRL_FUN(wifi),
-+      BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
-+};
-+
-+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_groups);
-+}
-+
-+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6362_groups[group].name;
-+}
-+
-+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6362_groups[group].pins;
-+      *num_pins = bcm6362_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6362_funcs);
-+}
-+
-+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6362_funcs[selector].name;
-+}
-+
-+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6362_funcs[selector].groups;
-+      *num_groups = bcm6362_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val & mask;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
-+      u32 mask = BIT(pin % 32);
-+
-+      if (desc->drv_data)
-+              bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0);
-+
-+      if (pin < 32) {
-+              /* base mode 0 => gpio 1 => mux function */
-+              bcm6362_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm6362_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else {
-+              /* ctrl reg 0 => wifi function 1 => gpio */
-+              bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6362_pingroup *grp = &bcm6362_groups[group];
-+      const struct bcm6362_function *f = &bcm6362_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm6362_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM6362_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_MODE:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM6362_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM6362_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->basemode_mask;
-+              val = f->basemode_mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm6362_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm6362_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6362_pctl_ops = {
-+      .get_groups_count       = bcm6362_pinctrl_get_group_count,
-+      .get_group_name         = bcm6362_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6362_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6362_pmx_ops = {
-+      .get_functions_count    = bcm6362_pinctrl_get_func_count,
-+      .get_function_name      = bcm6362_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6362_pinctrl_get_groups,
-+      .set_mux                = bcm6362_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6362_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6362_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6362_pctl_ops;
-+      pctl->desc.pmxops = &bcm6362_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6362_pins);
-+      pctl->desc.pins = bcm6362_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6362_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6362_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6362-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6362_pinctrl_driver = {
-+      .probe = bcm6362_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6362-pinctrl",
-+              .of_match_table = bcm6362_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6362_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index e0a698f..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:36:51 +0200
-Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6368 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt      | 67 ++++++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt
-@@ -0,0 +1,67 @@
-+* Broadcom BCM6368 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6368-pinctrl".
-+- reg: Register specifiers of dirout, dat, mode registers.
-+- reg-names: Must be "dirout", "dat", "mode".
-+- brcm,gpiobasemode: Phandle to the gpio basemode register.
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6368-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>;
-+      reg-names = "dirout", "dat", "mode";
-+      brcm,gpiobasemode = <&gpiobasemode>;
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+gpiobasemode: syscon@100000b8 {
-+      compatible = "brcm,bcm6368-gpiobasemode", "syscon";
-+      reg = <0x100000b8 4>;
-+      native-endian;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       analog_afe0
-+gpio1         1       analog_afe1
-+gpio2         2       sys_irq
-+gpio3         3       serial_led_data
-+gpio4         4       serial_led_clk
-+gpio5         5       inet_led
-+gpio6         6       ephy0_led
-+gpio7         7       ephy1_led
-+gpio8         8       ephy2_led
-+gpio9         9       ephy3_led
-+gpio10                10      robosw_led_data
-+gpio11                11      robosw_led_clk
-+gpio12                12      robosw_led0
-+gpio13                13      robosw_led1
-+gpio14                14      usb_device_led
-+gpio15                15      -
-+gpio16                16      pci_req1
-+gpio17                17      pci_gnt1
-+gpio18                18      pci_intb
-+gpio19                19      pci_req0
-+gpio20                20      pci_gnt0
-+gpio21                21      -
-+gpio22                22      pcmcia_cd1
-+gpio23                23      pcmcia_cd2
-+gpio24                24      pcmcia_vs1
-+gpio25                25      pcmcia_vs2
-+gpio26                26      ebi_cs2
-+gpio27                27      ebi_cs3
-+gpio28                28      spi_cs2
-+gpio29                29      spi_cs3
-+gpio30                30      spi_cs4
-+gpio31                31      spi_cs5
-+uart1_grp     30-33   uart1
diff --git a/target/linux/brcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/brcm63xx/patches-4.19/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch
deleted file mode 100644 (file)
index 6a9b9e0..0000000
+++ /dev/null
@@ -1,620 +0,0 @@
-From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:18:25 +0200
-Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368
-
-Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
-GPIOs onto alternative functions. Not all are documented.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |  15 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++
- 3 files changed, 589 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -30,3 +30,18 @@ config PINCTRL_BCM6362
-       select PINCONF
-       select PINCTRL_BCM63XX
-       select GENERIC_PINCONF
-+
-+config PINCTRL_BCM6368
-+      bool "BCM6368 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+      select MFD_SYSCON
-+
-+config PINCTRL_BCM63268
-+      bool "BCM63268 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
-+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c
-@@ -0,0 +1,573 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/kernel.h>
-+#include <linux/gpio.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6368_NGPIO 38
-+
-+#define BCM6368_BASEMODE_MASK 0x7
-+#define BCM6368_BASEMODE_GPIO 0x0
-+#define BCM6368_BASEMODE_UART1        0x1
-+
-+struct bcm6368_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6368_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned dir_out:16;
-+      unsigned basemode:3;
-+};
-+
-+struct bcm6368_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      struct regmap_field *overlay;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM6368_BASEMODE_PIN(a, b)            \
-+      {                                       \
-+              .number = a,                    \
-+              .name = b,                      \
-+              .drv_data = (void *)true        \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm6368_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      BCM6368_BASEMODE_PIN(30, "gpio30"),
-+      BCM6368_BASEMODE_PIN(31, "gpio31"),
-+      BCM6368_BASEMODE_PIN(32, "gpio32"),
-+      BCM6368_BASEMODE_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 };
-+
-+#define BCM6368_GROUP(n)                              \
-+      {                                               \
-+              .name = #n,                             \
-+              .pins = n##_pins,                       \
-+              .num_pins = ARRAY_SIZE(n##_pins),       \
-+      }
-+
-+static struct bcm6368_pingroup bcm6368_groups[] = {
-+      BCM6368_GROUP(gpio0),
-+      BCM6368_GROUP(gpio1),
-+      BCM6368_GROUP(gpio2),
-+      BCM6368_GROUP(gpio3),
-+      BCM6368_GROUP(gpio4),
-+      BCM6368_GROUP(gpio5),
-+      BCM6368_GROUP(gpio6),
-+      BCM6368_GROUP(gpio7),
-+      BCM6368_GROUP(gpio8),
-+      BCM6368_GROUP(gpio9),
-+      BCM6368_GROUP(gpio10),
-+      BCM6368_GROUP(gpio11),
-+      BCM6368_GROUP(gpio12),
-+      BCM6368_GROUP(gpio13),
-+      BCM6368_GROUP(gpio14),
-+      BCM6368_GROUP(gpio15),
-+      BCM6368_GROUP(gpio16),
-+      BCM6368_GROUP(gpio17),
-+      BCM6368_GROUP(gpio18),
-+      BCM6368_GROUP(gpio19),
-+      BCM6368_GROUP(gpio20),
-+      BCM6368_GROUP(gpio21),
-+      BCM6368_GROUP(gpio22),
-+      BCM6368_GROUP(gpio23),
-+      BCM6368_GROUP(gpio24),
-+      BCM6368_GROUP(gpio25),
-+      BCM6368_GROUP(gpio26),
-+      BCM6368_GROUP(gpio27),
-+      BCM6368_GROUP(gpio28),
-+      BCM6368_GROUP(gpio29),
-+      BCM6368_GROUP(gpio30),
-+      BCM6368_GROUP(gpio31),
-+      BCM6368_GROUP(uart1_grp),
-+};
-+
-+static const char * const analog_afe_0_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const analog_afe_1_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const sys_irq_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const inet_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy0_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy1_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const ephy2_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const ephy3_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const robosw_led_data_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const robosw_led_clk_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const robosw_led0_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const robosw_led1_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio14",
-+};
-+
-+static const char * const pci_req1_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const pci_gnt1_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const pci_intb_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const pci_req0_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const pci_gnt0_groups[] = {
-+      "gpio20",
-+};
-+
-+static const char * const pcmcia_cd1_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcmcia_cd2_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const pcmcia_vs1_groups[] = {
-+      "gpio24",
-+};
-+
-+static const char * const pcmcia_vs2_groups[] = {
-+      "gpio25",
-+};
-+
-+static const char * const ebi_cs2_groups[] = {
-+      "gpio26",
-+};
-+
-+static const char * const ebi_cs3_groups[] = {
-+      "gpio27",
-+};
-+
-+static const char * const spi_cs2_groups[] = {
-+      "gpio28",
-+};
-+
-+static const char * const spi_cs3_groups[] = {
-+      "gpio29",
-+};
-+
-+static const char * const spi_cs4_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const spi_cs5_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const uart1_groups[] = {
-+      "uart1_grp",
-+};
-+
-+#define BCM6368_FUN(n, out)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .dir_out = out,                         \
-+      }
-+
-+#define BCM6368_BASEMODE_FUN(n, val, out)             \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .basemode = BCM6368_BASEMODE_##val,     \
-+              .dir_out = out,                         \
-+      }
-+
-+static const struct bcm6368_function bcm6368_funcs[] = {
-+      BCM6368_FUN(analog_afe_0, 1),
-+      BCM6368_FUN(analog_afe_1, 1),
-+      BCM6368_FUN(sys_irq, 1),
-+      BCM6368_FUN(serial_led_data, 1),
-+      BCM6368_FUN(serial_led_clk, 1),
-+      BCM6368_FUN(inet_led, 1),
-+      BCM6368_FUN(ephy0_led, 1),
-+      BCM6368_FUN(ephy1_led, 1),
-+      BCM6368_FUN(ephy2_led, 1),
-+      BCM6368_FUN(ephy3_led, 1),
-+      BCM6368_FUN(robosw_led_data, 1),
-+      BCM6368_FUN(robosw_led_clk, 1),
-+      BCM6368_FUN(robosw_led0, 1),
-+      BCM6368_FUN(robosw_led1, 1),
-+      BCM6368_FUN(usb_device_led, 1),
-+      BCM6368_FUN(pci_req1, 0),
-+      BCM6368_FUN(pci_gnt1, 0),
-+      BCM6368_FUN(pci_intb, 0),
-+      BCM6368_FUN(pci_req0, 0),
-+      BCM6368_FUN(pci_gnt0, 0),
-+      BCM6368_FUN(pcmcia_cd1, 0),
-+      BCM6368_FUN(pcmcia_cd2, 0),
-+      BCM6368_FUN(pcmcia_vs1, 0),
-+      BCM6368_FUN(pcmcia_vs2, 0),
-+      BCM6368_FUN(ebi_cs2, 1),
-+      BCM6368_FUN(ebi_cs3, 1),
-+      BCM6368_FUN(spi_cs2, 1),
-+      BCM6368_FUN(spi_cs3, 1),
-+      BCM6368_FUN(spi_cs4, 1),
-+      BCM6368_FUN(spi_cs5, 1),
-+      BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
-+};
-+
-+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_groups);
-+}
-+
-+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6368_groups[group].name;
-+}
-+
-+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6368_groups[group].pins;
-+      *num_pins = bcm6368_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6368_funcs);
-+}
-+
-+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6368_funcs[selector].name;
-+}
-+
-+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6368_funcs[selector].groups;
-+      *num_groups = bcm6368_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg,
-+                          u32 mask, u32 val)
-+{
-+      u32 tmp;
-+
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= (val & mask);
-+      __raw_writel(tmp, reg);
-+}
-+
-+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6368_pingroup *grp = &bcm6368_groups[group];
-+      const struct bcm6368_function *fun = &bcm6368_funcs[selector];
-+      unsigned long flags;
-+      int i, pin;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (fun->basemode) {
-+              u32 mask = 0;
-+
-+              for (i = 0; i < grp->num_pins; i++) {
-+                      pin = grp->pins[i];
-+                      if (pin < 32)
-+                              mask |= BIT(pin);
-+              }
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, mask, 0);
-+              regmap_field_write(pctl->overlay, fun->basemode);
-+      } else {
-+              pin = grp->pins[0];
-+
-+              if (bcm6368_pins[pin].drv_data)
-+                      regmap_field_write(pctl->overlay,
-+                                         BCM6368_BASEMODE_GPIO);
-+
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin));
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      for (pin = 0; pin < grp->num_pins; pin++) {
-+              int hw_gpio = bcm6368_pins[pin].number;
-+              struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
-+
-+              if (fun->dir_out & BIT(pin))
-+                      gc->direction_output(gc, hw_gpio % 32, 0);
-+              else
-+                      gc->direction_input(gc, hw_gpio % 32);
-+      }
-+
-+      return 0;
-+}
-+
-+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      unsigned long flags;
-+
-+      if (offset >= 32 && !bcm6368_pins[offset].drv_data)
-+              return 0;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      /* disable all functions using this pin */
-+      if (offset < 32)
-+              bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0);
-+
-+      if (bcm6368_pins[offset].drv_data)
-+              regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6368_pctl_ops = {
-+      .get_groups_count       = bcm6368_pinctrl_get_group_count,
-+      .get_group_name         = bcm6368_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6368_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6368_pmx_ops = {
-+      .get_functions_count    = bcm6368_pinctrl_get_func_count,
-+      .get_function_name      = bcm6368_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6368_pinctrl_get_groups,
-+      .set_mux                = bcm6368_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6368_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6368_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode;
-+      struct regmap *basemode;
-+      struct reg_field overlay = REG_FIELD(0, 0, 3);
-+
-+      if (pdev->dev.of_node)
-+              basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+                                                         "brcm,gpiobasemode");
-+      else
-+              basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8");
-+
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay);
-+      if (IS_ERR(pctl->overlay))
-+              return PTR_ERR(pctl->overlay);
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      /* disable all muxes by default */
-+      __raw_writel(0, pctl->mode);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6368_pctl_ops;
-+      pctl->desc.pmxops = &bcm6368_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6368_pins);
-+      pctl->desc.pins = bcm6368_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6368_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6368_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6368-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6368_pinctrl_driver = {
-+      .probe = bcm6368_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6368-pinctrl",
-+              .of_match_table = bcm6368_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6368_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/brcm63xx/patches-4.19/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch
deleted file mode 100644 (file)
index ffe842f..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:37:08 +0200
-Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in the BCM63268
-family SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt     | 88 ++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt
-@@ -0,0 +1,88 @@
-+* Broadcom BCM63268 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6362-pinctrl".
-+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers.
-+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode".
-+- gpio-controller: Identifies this node as a GPIO controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@100000c0 {
-+      compatible = "brcm,bcm63268-pinctrl";
-+      reg = <0x100000c0 0x8>,
-+            <0x100000c8 0x8>,
-+            <0x100000d0 0x4>,
-+            <0x100000d8 0x4>,
-+            <0x100000dc 0x4>,
-+            <0x100000f8 0x4>;
-+      reg-names = "dirout", "dat", "led", "mode",
-+                  "ctrl", "basemode";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+Available pins/groups and functions:
-+
-+name          pins            functions
-+-----------------------------------------------------------
-+gpio0         0               led, serial_led_clk
-+gpio1         1               led, serial_led_data
-+gpio2         2               led,
-+gpio3         3               led,
-+gpio4         4               led,
-+gpio5         5               led,
-+gpio6         6               led,
-+gpio7         7               led,
-+gpio8         8               led, hsspi_cs6
-+gpio9         9               led, hsspi_cs7
-+gpio10                10              led, uart1_scts
-+gpio11                11              led, uart1_srts
-+gpio12                12              led, uart1_sdin
-+gpio13                13              led, uart1_sdout
-+gpio14                14              led, ntr_pulse_in
-+gpio15                15              led, dsl_ntr_pulse_out
-+gpio16                16              led, hsspi_cs4
-+gpio17                17              led, hsspi_cs5
-+gpio18                18              led, adsl_spi_miso
-+gpio19                19              led, adsl_spi_mosi
-+gpio20                20              led,
-+gpio21                21              led,
-+gpio22                22              led, vreg_clk
-+gpio23                23              led, pcie_clkreq_b
-+gpio24                24              uart1_scts
-+gpio25                25              uart1_srts
-+gpio26                26              uart1_sdin
-+gpio27                27              uart1_sdout
-+gpio28                28              ntr_pulse_in
-+gpio29                29              dsl_ntr_pulse_out
-+gpio30                30              switch_led_clk
-+gpio31                31              switch_led_data
-+gpio32                32              wifi
-+gpio33                33              wifi
-+gpio34                34              wifi
-+gpio35                35              wifi
-+gpio36                36              wifi
-+gpio37                37              wifi
-+gpio38                38              wifi
-+gpio39                39              wifi
-+gpio40                40              wifi
-+gpio41                41              wifi
-+gpio42                42              wifi
-+gpio43                43              wifi
-+gpio44                44              wifi
-+gpio45                45              wifi
-+gpio46                46              wifi
-+gpio47                47              wifi
-+gpio48                48              wifi
-+gpio49                49              wifi
-+gpio50                50              wifi
-+gpio51                51              wifi
-+nand_grp      2-7,24-31       nand
-+dect_pd_grp   8-9             dect_pd
-+vdsl_phy0_grp 10-11           vdsl_phy0
-+vdsl_phy1_grp 12-13           vdsl_phy1
-+vdsl_phy2_grp 24-25           vdsl_phy2
-+vdsl_phy3_grp 26-27           vdsl_phy3
diff --git a/target/linux/brcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.19/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch
deleted file mode 100644 (file)
index 089d14e..0000000
+++ /dev/null
@@ -1,736 +0,0 @@
-From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:19:12 +0200
-Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268
-
-Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
-to different functions. Depending on the mux, these are either single
-pin configurations or whole pin groups.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Makefile           |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++
- 2 files changed, 711 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348)  += pinctrl
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
- obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
-+obj-$(CONFIG_PINCTRL_BCM63268)        += pinctrl-bcm63268.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c
-@@ -0,0 +1,710 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM63268_NGPIO                        52
-+
-+/* GPIO_BASEMODE register */
-+#define BASEMODE_NAND                 BIT(2) /* GPIOs 2-7, 24-31 */
-+#define BASEMODE_GPIO35                       BIT(4) /* GPIO 35 */
-+#define BASEMODE_DECTPD                       BIT(5) /* GPIOs 8/9 */
-+#define BASEMODE_VDSL_PHY_0           BIT(6) /* GPIOs 10/11 */
-+#define BASEMODE_VDSL_PHY_1           BIT(7) /* GPIOs 12/13 */
-+#define BASEMODE_VDSL_PHY_2           BIT(8) /* GPIOs 24/25 */
-+#define BASEMODE_VDSL_PHY_3           BIT(9) /* GPIOs 26/27 */
-+
-+enum bcm63268_pinctrl_reg {
-+      BCM63268_LEDCTRL,
-+      BCM63268_MODE,
-+      BCM63268_CTRL,
-+      BCM63268_BASEMODE,
-+};
-+
-+struct bcm63268_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm63268_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      enum bcm63268_pinctrl_reg reg;
-+      u32 mask;
-+};
-+
-+struct bcm63268_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *led;
-+      void __iomem *mode;
-+      void __iomem *ctrl;
-+      void __iomem *basemode;
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+#define BCM63268_PIN(a, b, basemode)                  \
-+      {                                               \
-+              .number = a,                            \
-+              .name = b,                              \
-+              .drv_data = (void *)(basemode)          \
-+      }
-+
-+static const struct pinctrl_pin_desc bcm63268_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      BCM63268_PIN(2, "gpio2", BASEMODE_NAND),
-+      BCM63268_PIN(3, "gpio3", BASEMODE_NAND),
-+      BCM63268_PIN(4, "gpio4", BASEMODE_NAND),
-+      BCM63268_PIN(5, "gpio5", BASEMODE_NAND),
-+      BCM63268_PIN(6, "gpio6", BASEMODE_NAND),
-+      BCM63268_PIN(7, "gpio7", BASEMODE_NAND),
-+      BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD),
-+      BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD),
-+      BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0),
-+      BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1),
-+      BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2),
-+      BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3),
-+      BCM63268_PIN(28, "gpio28", BASEMODE_NAND),
-+      BCM63268_PIN(29, "gpio29", BASEMODE_NAND),
-+      BCM63268_PIN(30, "gpio30", BASEMODE_NAND),
-+      BCM63268_PIN(31, "gpio31", BASEMODE_NAND),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+      PINCTRL_PIN(50, "gpio50"),
-+      PINCTRL_PIN(51, "gpio51"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+static unsigned gpio50_pins[] = { 50 };
-+static unsigned gpio51_pins[] = { 51 };
-+
-+static unsigned nand_grp_pins[] = {
-+      2, 3, 4, 5, 6, 7, 24,
-+      25, 26, 27, 28, 29, 30, 31,
-+};
-+
-+static unsigned dectpd_grp_pins[] = { 8, 9 };
-+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 };
-+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 };
-+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 };
-+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 };
-+
-+#define BCM63268_GROUP(n)                                     \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm63268_pingroup bcm63268_groups[] = {
-+      BCM63268_GROUP(gpio0),
-+      BCM63268_GROUP(gpio1),
-+      BCM63268_GROUP(gpio2),
-+      BCM63268_GROUP(gpio3),
-+      BCM63268_GROUP(gpio4),
-+      BCM63268_GROUP(gpio5),
-+      BCM63268_GROUP(gpio6),
-+      BCM63268_GROUP(gpio7),
-+      BCM63268_GROUP(gpio8),
-+      BCM63268_GROUP(gpio9),
-+      BCM63268_GROUP(gpio10),
-+      BCM63268_GROUP(gpio11),
-+      BCM63268_GROUP(gpio12),
-+      BCM63268_GROUP(gpio13),
-+      BCM63268_GROUP(gpio14),
-+      BCM63268_GROUP(gpio15),
-+      BCM63268_GROUP(gpio16),
-+      BCM63268_GROUP(gpio17),
-+      BCM63268_GROUP(gpio18),
-+      BCM63268_GROUP(gpio19),
-+      BCM63268_GROUP(gpio20),
-+      BCM63268_GROUP(gpio21),
-+      BCM63268_GROUP(gpio22),
-+      BCM63268_GROUP(gpio23),
-+      BCM63268_GROUP(gpio24),
-+      BCM63268_GROUP(gpio25),
-+      BCM63268_GROUP(gpio26),
-+      BCM63268_GROUP(gpio27),
-+      BCM63268_GROUP(gpio28),
-+      BCM63268_GROUP(gpio29),
-+      BCM63268_GROUP(gpio30),
-+      BCM63268_GROUP(gpio31),
-+      BCM63268_GROUP(gpio32),
-+      BCM63268_GROUP(gpio33),
-+      BCM63268_GROUP(gpio34),
-+      BCM63268_GROUP(gpio35),
-+      BCM63268_GROUP(gpio36),
-+      BCM63268_GROUP(gpio37),
-+      BCM63268_GROUP(gpio38),
-+      BCM63268_GROUP(gpio39),
-+      BCM63268_GROUP(gpio40),
-+      BCM63268_GROUP(gpio41),
-+      BCM63268_GROUP(gpio42),
-+      BCM63268_GROUP(gpio43),
-+      BCM63268_GROUP(gpio44),
-+      BCM63268_GROUP(gpio45),
-+      BCM63268_GROUP(gpio46),
-+      BCM63268_GROUP(gpio47),
-+      BCM63268_GROUP(gpio48),
-+      BCM63268_GROUP(gpio49),
-+      BCM63268_GROUP(gpio50),
-+      BCM63268_GROUP(gpio51),
-+
-+      /* multi pin groups */
-+      BCM63268_GROUP(nand_grp),
-+      BCM63268_GROUP(dectpd_grp),
-+      BCM63268_GROUP(vdsl_phy0_grp),
-+      BCM63268_GROUP(vdsl_phy1_grp),
-+      BCM63268_GROUP(vdsl_phy2_grp),
-+      BCM63268_GROUP(vdsl_phy3_grp),
-+};
-+
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const hsspi_cs4_groups[] = {
-+      "gpio16",
-+};
-+
-+static const char * const hsspi_cs5_groups[] = {
-+      "gpio17",
-+};
-+
-+static const char * const hsspi_cs6_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const hsspi_cs7_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const uart1_scts_groups[] = {
-+      "gpio10",
-+      "gpio24",
-+};
-+
-+static const char * const uart1_srts_groups[] = {
-+      "gpio11",
-+      "gpio25",
-+};
-+
-+static const char * const uart1_sdin_groups[] = {
-+      "gpio12",
-+      "gpio26",
-+};
-+
-+static const char * const uart1_sdout_groups[] = {
-+      "gpio13",
-+      "gpio27",
-+};
-+
-+static const char * const ntr_pulse_in_groups[] = {
-+      "gpio14",
-+      "gpio28",
-+};
-+
-+static const char * const dsl_ntr_pulse_out_groups[] = {
-+      "gpio15",
-+      "gpio29",
-+};
-+
-+static const char * const adsl_spi_miso_groups[] = {
-+      "gpio18",
-+};
-+
-+static const char * const adsl_spi_mosi_groups[] = {
-+      "gpio19",
-+};
-+
-+static const char * const vreg_clk_groups[] = {
-+      "gpio22",
-+};
-+
-+static const char * const pcie_clkreq_b_groups[] = {
-+      "gpio23",
-+};
-+
-+static const char * const switch_led_clk_groups[] = {
-+      "gpio30",
-+};
-+
-+static const char * const switch_led_data_groups[] = {
-+      "gpio31",
-+};
-+
-+static const char * const wifi_groups[] = {
-+      "gpio32",
-+      "gpio33",
-+      "gpio34",
-+      "gpio35",
-+      "gpio36",
-+      "gpio37",
-+      "gpio38",
-+      "gpio39",
-+      "gpio40",
-+      "gpio41",
-+      "gpio42",
-+      "gpio43",
-+      "gpio44",
-+      "gpio45",
-+      "gpio46",
-+      "gpio47",
-+      "gpio48",
-+      "gpio49",
-+      "gpio50",
-+      "gpio51",
-+};
-+
-+static const char * const nand_groups[] = {
-+      "nand_grp",
-+};
-+
-+static const char * const dectpd_groups[] = {
-+      "dectpd_grp",
-+};
-+
-+static const char * const vdsl_phy_override_0_groups[] = {
-+      "vdsl_phy_override_0_grp",
-+};
-+
-+static const char * const vdsl_phy_override_1_groups[] = {
-+      "vdsl_phy_override_1_grp",
-+};
-+
-+static const char * const vdsl_phy_override_2_groups[] = {
-+      "vdsl_phy_override_2_grp",
-+};
-+
-+static const char * const vdsl_phy_override_3_groups[] = {
-+      "vdsl_phy_override_3_grp",
-+};
-+
-+#define BCM63268_LED_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_LEDCTRL,                \
-+      }
-+
-+#define BCM63268_MODE_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_MODE,                   \
-+      }
-+
-+#define BCM63268_CTRL_FUN(n)                          \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_CTRL,                   \
-+      }
-+
-+#define BCM63268_BASEMODE_FUN(n, val)                 \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .reg = BCM63268_BASEMODE,               \
-+              .mask = val,                            \
-+      }
-+
-+static const struct bcm63268_function bcm63268_funcs[] = {
-+      BCM63268_LED_FUN(led),
-+      BCM63268_MODE_FUN(serial_led_clk),
-+      BCM63268_MODE_FUN(serial_led_data),
-+      BCM63268_MODE_FUN(hsspi_cs6),
-+      BCM63268_MODE_FUN(hsspi_cs7),
-+      BCM63268_MODE_FUN(uart1_scts),
-+      BCM63268_MODE_FUN(uart1_srts),
-+      BCM63268_MODE_FUN(uart1_sdin),
-+      BCM63268_MODE_FUN(uart1_sdout),
-+      BCM63268_MODE_FUN(ntr_pulse_in),
-+      BCM63268_MODE_FUN(dsl_ntr_pulse_out),
-+      BCM63268_MODE_FUN(hsspi_cs4),
-+      BCM63268_MODE_FUN(hsspi_cs5),
-+      BCM63268_MODE_FUN(adsl_spi_miso),
-+      BCM63268_MODE_FUN(adsl_spi_mosi),
-+      BCM63268_MODE_FUN(vreg_clk),
-+      BCM63268_MODE_FUN(pcie_clkreq_b),
-+      BCM63268_MODE_FUN(switch_led_clk),
-+      BCM63268_MODE_FUN(switch_led_data),
-+      BCM63268_CTRL_FUN(wifi),
-+      BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND),
-+      BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2),
-+      BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3),
-+};
-+
-+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_groups);
-+}
-+
-+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                 unsigned group)
-+{
-+      return bcm63268_groups[group].name;
-+}
-+
-+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                         unsigned group,
-+                                         const unsigned **pins,
-+                                         unsigned *num_pins)
-+{
-+      *pins = bcm63268_groups[group].pins;
-+      *num_pins = bcm63268_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm63268_funcs);
-+}
-+
-+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                                unsigned selector)
-+{
-+      return bcm63268_funcs[selector].name;
-+}
-+
-+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                     unsigned selector,
-+                                     const char * const **groups,
-+                                     unsigned * const num_groups)
-+{
-+      *groups = bcm63268_funcs[selector].groups;
-+      *num_groups = bcm63268_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg,
-+                           u32 mask, u32 val)
-+{
-+      unsigned long flags;
-+      u32 tmp;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      tmp = __raw_readl(reg);
-+      tmp &= ~mask;
-+      tmp |= val;
-+      __raw_writel(tmp, reg);
-+
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin)
-+{
-+      const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
-+      u32 basemode = (unsigned long)desc->drv_data;
-+      u32 mask = BIT(pin % 32);
-+
-+      if (basemode)
-+              bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0);
-+
-+      if (pin < 32) {
-+              /* base mode: 0 => gpio, 1 => mux function */
-+              bcm63268_rmw_mux(pctl, pctl->mode, mask, 0);
-+
-+              /* pins 0-23 might be muxed to led */
-+              if (pin < 24)
-+                      bcm63268_rmw_mux(pctl, pctl->led, mask, 0);
-+      } else if (pin < 52) {
-+              /* ctrl reg: 0 => wifi function, 1 => gpio */
-+              bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask);
-+      }
-+}
-+
-+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                  unsigned selector, unsigned group)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm63268_pingroup *grp = &bcm63268_groups[group];
-+      const struct bcm63268_function *f = &bcm63268_funcs[selector];
-+      unsigned i;
-+      void __iomem *reg;
-+      u32 val, mask;
-+
-+      for (i = 0; i < grp->num_pins; i++)
-+              bcm63268_set_gpio(pctl, grp->pins[i]);
-+
-+      switch (f->reg) {
-+      case BCM63268_LEDCTRL:
-+              reg = pctl->led;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_MODE:
-+              reg = pctl->mode;
-+              mask = BIT(grp->pins[0]);
-+              val = BIT(grp->pins[0]);
-+              break;
-+      case BCM63268_CTRL:
-+              reg = pctl->ctrl;
-+              mask = BIT(grp->pins[0]);
-+              val = 0;
-+              break;
-+      case BCM63268_BASEMODE:
-+              reg = pctl->basemode;
-+              mask = f->mask;
-+              val = f->mask;
-+              break;
-+      default:
-+              WARN_ON(1);
-+              return -EINVAL;
-+      }
-+
-+      bcm63268_rmw_mux(pctl, reg, mask, val);
-+
-+      return 0;
-+}
-+
-+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                      struct pinctrl_gpio_range *range,
-+                                      unsigned offset)
-+{
-+      struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      bcm63268_set_gpio(pctl, offset);
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm63268_pctl_ops = {
-+      .get_groups_count       = bcm63268_pinctrl_get_group_count,
-+      .get_group_name         = bcm63268_pinctrl_get_group_name,
-+      .get_group_pins         = bcm63268_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm63268_pmx_ops = {
-+      .get_functions_count    = bcm63268_pinctrl_get_func_count,
-+      .get_function_name      = bcm63268_pinctrl_get_func_name,
-+      .get_function_groups    = bcm63268_pinctrl_get_groups,
-+      .set_mux                = bcm63268_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm63268_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm63268_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *led, *mode, *ctrl, *basemode;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led");
-+      led = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(led))
-+              return PTR_ERR(led);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-+      ctrl = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(ctrl))
-+              return PTR_ERR(ctrl);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode");
-+      basemode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(basemode))
-+              return PTR_ERR(basemode);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->led = led;
-+      pctl->mode = mode;
-+      pctl->ctrl = ctrl;
-+      pctl->basemode = basemode;
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm63268_pctl_ops;
-+      pctl->desc.pmxops = &bcm63268_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm63268_pins);
-+      pctl->desc.pins = bcm63268_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM63268_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm63268_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm63268-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm63268_pinctrl_driver = {
-+      .probe = bcm63268_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm63268-pinctrl",
-+              .of_match_table = bcm63268_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm63268_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/brcm63xx/patches-4.19/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
deleted file mode 100644 (file)
index 13225be..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 26 Nov 2017 12:07:31 +0100
-Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol
- controllers
-
-For dual role gpio and pincontrol controller, the device registration
-path is often:
-
-  pinctrl_register(...);
-  gpiochip_add_data(...);
-  gpiochip_add_pin_range(...);
-
-If the device tree node has any gpio-hogs, the code will try to apply them
-in the gpiochip_add_data step, but fail as they cannot be requested, as the
-ranges are missing. But we also cannot first add the pinranges, as the
-appropriate data structures are only initialized in gpiochip_add_data.
-
-To fix this, defer gpio-hogs to the time pin ranges get added instead of
-directly at chip request time, if the gpio-chip has a request method.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-
- drivers/gpio/gpiolib-of.c | 20 +++++++++++++++-----
- drivers/gpio/gpiolib.c    |  5 +++--
- drivers/gpio/gpiolib.h    |  8 ++++++++
- 3 files changed, 26 insertions(+), 7 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -363,12 +363,15 @@ static struct gpio_desc *of_parse_own_gp
- /**
-  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
-  * @chip:     gpio chip to act on
-+ * @start:    first gpio to check
-+ * @num:      number of gpios to check
-  *
-- * This is only used by of_gpiochip_add to request/set GPIO initial
-- * configuration.
-+ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and
-+ * gpiochip_add_pin_range to request/set GPIO initial configuration.
-  * It returns error if it fails otherwise 0 on success.
-  */
--static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num)
- {
-       struct gpio_desc *desc = NULL;
-       struct device_node *np;
-@@ -376,7 +379,7 @@ static int of_gpiochip_scan_gpios(struct
-       enum gpio_lookup_flags lflags;
-       enum gpiod_flags dflags;
-       unsigned int i;
--      int ret;
-+      int ret, hwgpio;
-       for_each_available_child_of_node(chip->of_node, np) {
-               if (!of_property_read_bool(np, "gpio-hog"))
-@@ -388,6 +391,10 @@ static int of_gpiochip_scan_gpios(struct
-                       if (IS_ERR(desc))
-                               break;
-+                      hwgpio = gpio_chip_hwgpio(desc);
-+                      if (hwgpio < start || hwgpio >= (start + num))
-+                              continue;
-+
-                       ret = gpiod_hog(desc, name, lflags, dflags);
-                       if (ret < 0) {
-                               of_node_put(np);
-@@ -646,12 +653,13 @@ int of_gpiochip_add(struct gpio_chip *ch
-       of_node_get(chip->of_node);
--      status = of_gpiochip_scan_gpios(chip);
--      if (status) {
--              of_node_put(chip->of_node);
--              gpiochip_remove_pin_ranges(chip);
-+      if (!chip->request) {
-+              status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio);
-+              if (status) {
-+                      of_node_put(chip->of_node);
-+                      gpiochip_remove_pin_ranges(chip);
-+              }
-       }
--
-       return status;
- }
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -2205,7 +2205,8 @@ int gpiochip_add_pingroup_range(struct g
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset,
-+                                    pin_range->range.npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
-@@ -2262,7 +2263,7 @@ int gpiochip_add_pin_range(struct gpio_c
-       list_add_tail(&pin_range->node, &gdev->pin_ranges);
--      return 0;
-+      return of_gpiochip_scan_gpios(chip, gpio_offset, npins);
- }
- EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
---- a/drivers/gpio/gpiolib.h
-+++ b/drivers/gpio/gpiolib.h
-@@ -103,6 +103,8 @@ struct gpio_desc *of_get_named_gpiod_fla
-                  const char *list_name, int index, enum of_gpio_flags *flags);
- int of_gpiochip_add(struct gpio_chip *gc);
- void of_gpiochip_remove(struct gpio_chip *gc);
-+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start,
-+                         unsigned int num);
- #else
- static inline struct gpio_desc *of_find_gpio(struct device *dev,
-                                            const char *con_id,
-@@ -118,6 +120,12 @@ static inline struct gpio_desc *of_get_n
- }
- static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; }
- static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
-+static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip,
-+                                       unsigned int start,
-+                                       unsigned int num)
-+{
-+      return 0;
-+}
- #endif /* CONFIG_OF_GPIO */
- #ifdef CONFIG_ACPI
diff --git a/target/linux/brcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-4.19/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644 (file)
index 6425869..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -665,6 +665,10 @@ int ehci_setup(struct usb_hcd *hcd)
-       /* cache this readonly data; minimize chip reads */
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      if (ehci->num_ports) {
-+              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+              ehci->hcs_params |= ehci->num_ports;
-+      }
-       ehci->sbrn = HCD_USB2;
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -57,6 +57,9 @@ static int ehci_platform_reset(struct us
-       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-+      if (pdata->num_ports && pdata->num_ports <= 15)
-+              ehci->num_ports = pdata->num_ports;
-+
-       if (pdata->pre_setup) {
-               retval = pdata->pre_setup(hcd);
-               if (retval < 0)
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -203,6 +203,7 @@ struct ehci_hcd {                  /* one per controlle
-       u32                     command;
-       /* SILICON QUIRKS */
-+      unsigned int            num_ports;
-       unsigned                no_selective_suspend:1;
-       unsigned                has_fsl_port_bug:1; /* FreeScale */
-       unsigned                has_fsl_hs_errata:1;    /* Freescale HS quirk */
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -43,6 +43,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
-       int             caps_offset;
-+      unsigned int    num_ports;
-       unsigned        has_tt:1;
-       unsigned        has_synopsys_hc_bug:1;
-       unsigned        big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/brcm63xx/patches-4.19/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644 (file)
index 90b1640..0000000
+++ /dev/null
@@ -1,484 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
-+obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,33 +12,21 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- #define HCS_OFFSET_128K                       0x20000
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -695,52 +683,6 @@ static const struct board_info __initcon
- };
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              pr_err("unable to fill SPROM for given bustype\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--      return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -785,137 +727,15 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+              board_early_setup(bcm963xx_boards[i]);
-               break;
-       }
--      /* bail out if board is not found, will complain later */
--      if (!board.name[0]) {
-+      /* warn if board is not found, will complain later */
-+      if (i == ARRAY_SIZE(bcm963xx_boards)) {
-               char name[17];
-               memcpy(name, board_name, 16);
-               name[16] = 0;
-               pr_err("unknown bcm963xx board: %s\n", name);
--              return;
--      }
--
--      /* setup pin multiplexing depending on board enabled device,
--       * this has to be done this early since PCI init is done
--       * inside arch_initcall */
--      val = 0;
--
--#ifdef CONFIG_PCI
--      if (board.has_pci) {
--              bcm63xx_pci_enabled = 1;
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G2_PCI;
-       }
--#endif
--
--      if (board.has_pccard) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
--      }
--
--      if (board.has_enet0 && !board.enet0.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      if (board.has_enet1 && !board.enet1.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--      if (!board.name[0])
--              panic("unable to detect bcm963xx board");
--      pr_info("board name: %s\n", board.name);
--
--      /* make sure we're running on expected cpu */
--      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--              panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--      .name                   = "leds-gpio",
--      .id                     = 0,
--      .dev.platform_data      = &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
--      if (board.has_pccard)
--              bcm63xx_pcmcia_register();
--
--      if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--              bcm63xx_enet_register(0, &board.enet0);
--
--      if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--              bcm63xx_enet_register(1, &board.enet1);
--
--      if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--              bcm63xx_enetsw_register(&board.enetsw);
--
--      if (board.has_usbd)
--              bcm63xx_usbd_register(&board.usbd);
--
--      if (board.has_ehci0)
--              bcm63xx_ehci_register();
--
--      if (board.has_ohci0)
--              bcm63xx_ohci_register();
--
--      /* Generate MAC address for WLAN and register our SPROM,
--       * do this after registering enet devices
--       */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err("failed to register fallback SPROM\n");
--      }
--#endif
--
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
--      bcm63xx_flash_register();
--
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
--
--      platform_device_register(&bcm63xx_gpio_leds);
--
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
--
--      return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,214 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_gpio.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+      u32 val;
-+
-+      memcpy(&board, target, sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_enetsw &&
-+          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+              bcm63xx_enetsw_register(&board.enetsw);
-+
-+      if (board.has_usbd)
-+              bcm63xx_usbd_register(&board.usbd);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      /* Generate MAC address for WLAN and register our SPROM,
-+       * do this after registering enet devices
-+       */
-+#ifdef CONFIG_SSB_PCIHOST
-+      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              if (ssb_arch_register_fallback_sprom(
-+                              &bcm63xx_get_fallback_sprom) < 0)
-+                      pr_err(PFX "failed to register fallback SPROM\n");
-+      }
-+#endif
-+
-+      bcm63xx_spi_register();
-+
-+      bcm63xx_hsspi_register();
-+
-+      bcm63xx_flash_register();
-+
-+      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+              gpio_request_one(board.ephy_reset_gpio,
-+                              board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+      return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/brcm63xx/patches-4.19/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644 (file)
index 7f9479b..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -727,7 +727,8 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              board_early_setup(bcm963xx_boards[i]);
-+              board_early_setup(bcm963xx_boards[i],
-+                                bcm63xx_nvram_get_mac_address);
-               break;
-       }
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
-       u32 val;
-       memcpy(&board, target, sizeof(board));
-+      board_get_mac_address = get_mac_address;
-+
-       /* setup pin multiplexing depending on board enabled device,
-        * this has to be done this early since PCI init is done
-        * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
-               bcm63xx_pcmcia_register();
-       if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+          !board_get_mac_address(board.enet0.mac_addr))
-               bcm63xx_enet_register(0, &board.enet0);
-       if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+          !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-       if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+          !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-       if (board.has_usbd)
-@@ -186,7 +190,7 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- #include <board_bcm963xx.h>
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.19/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-4.19/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index fe6c6d2..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -707,10 +707,20 @@ void __init board_prom_init(void)
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--      if (!memcmp(cfe, "cfe-v", 5))
--              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--      else
-+      if (strstarts(cfe, "cfe-")) {
-+              if(cfe[4] == 'v') {
-+                      if(cfe[5] == 'd')
-+                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+                      else if (cfe[10] > 0)
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+                      else
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+              } else {
-+                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+              }
-+      } else
-               strcpy(cfe_version, "unknown");
-       pr_info("CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-4.19/310-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-4.19/310-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index 0e4e759..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -2,6 +2,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -10,4 +12,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-4.19/311-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index bca6adb..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,6 +35,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-+ 
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM963XX_CFE_BLOCK_SIZE               SZ_64K  /* always at least 64KiB */
-@@ -46,30 +48,6 @@
- #define STR_NULL_TERMINATE(x) \
-       do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_read_nvram(struct mtd_info *master,
-       struct bcm963xx_nvram *nvram)
- {
-@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions(
-       struct bcm963xx_nvram *nvram = NULL;
-       int ret;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       nvram = vzalloc(sizeof(*nvram));
diff --git a/target/linux/brcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/brcm63xx/patches-4.19/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644 (file)
index b75987e..0000000
+++ /dev/null
@@ -1,455 +0,0 @@
-From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 410 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+      compatible = "brcm,bcm6345-periph-intc";
-+      reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+      interrupt-controller;
-+      #interrupt-cells = <1>;
-+
-+      interrupt-parent = <&cpu_intc>;
-+      interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -129,6 +129,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_PERIPH_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config DW_APB_ICTL
-       bool
-       select GENERIC_IRQ_CHIP
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_CLPS711X_IRQCHIP)                += irq-clps711x.o
- obj-$(CONFIG_OMPIC)                   += irq-ompic.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,339 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE     IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE     0
-+#endif
-+
-+#define MAX_WORDS     4
-+#define MAX_PARENT_IRQS       2
-+#define IRQS_PER_WORD 32
-+
-+struct intc_block {
-+      int parent_irq;
-+      void __iomem *base;
-+      void __iomem *en_reg[MAX_WORDS];
-+      void __iomem *status_reg[MAX_WORDS];
-+      u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct intc_block block[MAX_PARENT_IRQS];
-+
-+      int num_words;
-+
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      struct intc_block *block;
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+              if (irq == data->block[idx].parent_irq)
-+                      block = &data->block[idx];
-+
-+      for (idx = 0; idx < data->num_words; idx++) {
-+              int base = idx * IRQS_PER_WORD;
-+              unsigned long pending;
-+              int hw_irq;
-+
-+              raw_spin_lock(&data->lock);
-+              pending = __raw_readl(block->en_reg[idx]) &
-+                        __raw_readl(block->status_reg[idx]);
-+              raw_spin_unlock(&data->lock);
-+
-+              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+                      int virq;
-+
-+                      virq  = irq_find_mapping(data->domain, base + hw_irq);
-+                      generic_handle_irq(virq);
-+              }
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+                                  bool enable)
-+{
-+      u32 val;
-+
-+      val = __raw_readl(block->en_reg[reg]);
-+      if (enable)
-+              val |= BIT(bit);
-+      else
-+              val &= ~BIT(bit);
-+      __raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+      unsigned int i, reg, bit;
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      unsigned int i, reg, bit;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (block->mask_cache[reg] & BIT(bit))
-+                      __bcm6345_periph_enable(block, reg, bit, true);
-+              else
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+                                     const struct cpumask *mask, bool force)
-+{
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      struct intc_data *priv = data->domain->host_data;
-+      unsigned int i, reg, bit;
-+      unsigned long flags;
-+      bool enabled;
-+      int cpu;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      /* we could route to more than one cpu, but performance
-+         suffers, so fix it to one.
-+       */
-+      cpu = cpumask_any_and(mask, cpu_online_mask);
-+      if (cpu >= nr_cpu_ids)
-+              return -EINVAL;
-+
-+      if (cpu >= MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      if (!priv->block[cpu].parent_irq)
-+              return -EINVAL;
-+
-+      raw_spin_lock_irqsave(&priv->lock, flags);
-+      enabled = !irqd_irq_masked(data);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (i == cpu) {
-+                      block->mask_cache[reg] |= BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, enabled);
-+              } else {
-+                      block->mask_cache[reg] &= ~BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+              }
-+      }
-+      raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+      return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+                            irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+      .xlate = irq_domain_xlate_onecell,
-+      .map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+                                           int num_blocks, int *irq,
-+                                           void __iomem **base, int num_words)
-+{
-+      struct intc_data *data;
-+      unsigned int i, w, status_offset;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      status_offset = num_words * sizeof(u32);
-+
-+      for (i = 0; i < num_blocks; i++) {
-+              struct intc_block *block = &data->block[i];
-+
-+              block->parent_irq = irq[i];
-+              block->base = base[i];
-+
-+              for (w = 0; w < num_words; w++) {
-+                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+                      block->en_reg[w] = base[i] + word_offset;
-+                      block->status_reg[w] = base[i] + status_offset;
-+                      block->status_reg[w] += word_offset;
-+
-+                      /* route all interrupts to line 0 by default */
-+                      if (i == 0)
-+                              block->mask_cache[w] = 0xffffffff;
-+              }
-+
-+              irq_set_handler_data(block->parent_irq, data);
-+              irq_set_chained_handler(block->parent_irq,
-+                                      bcm6345_periph_irq_handle);
-+      }
-+
-+      data->num_words = num_words;
-+
-+      data->chip.name = "bcm6345-periph-intc";
-+      data->chip.irq_mask = bcm6345_periph_irq_mask;
-+      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+      if (num_blocks > 1)
-+              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+                                           VIRQ_BASE,
-+                                           &bcm6345_periph_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -EINVAL;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+                                   void __iomem **base, int num_words)
-+{
-+      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+                                       struct device_node *parent)
-+{
-+      struct resource res;
-+      int num_irqs, ret = -EINVAL;
-+      int irqs[MAX_PARENT_IRQS] = { 0 };
-+      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+      int words = 0;
-+      int i;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              resource_size_t size;
-+
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i])
-+                      goto out_unmap;
-+
-+              if (of_address_to_resource(node, i, &res))
-+                      goto out_unmap;
-+
-+              size = resource_size(&res);
-+              switch (size) {
-+              case 8:
-+              case 16:
-+              case 32:
-+                      size = size / 8;
-+                      break;
-+              default:
-+                      goto out_unmap;
-+              }
-+
-+              if (words && words != size) {
-+                      ret = -EINVAL;
-+                      goto out_unmap;
-+              }
-+              words = size;
-+
-+              bases[i] = of_iomap(node, i);
-+              if (!bases[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+      if (!ret)
-+              return 0;
-+
-+out_unmap:
-+      for (i = 0; i < num_irqs; i++) {
-+              iounmap(bases[i]);
-+              irq_dispose_mapping(irqs[i]);
-+      }
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc",
-+              bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+                            int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/brcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/brcm63xx/patches-4.19/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644 (file)
index 4db80ef..0000000
+++ /dev/null
@@ -1,394 +0,0 @@
-From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 335 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc".
-+- reg: Specifies the base physical addresses and size of the registers.
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+      compatible = "brcm,bcm6345-ext-intc";
-+      interrupt-parent = <&periph_intc>;
-+      #interrupt-cells = <2>;
-+      reg = <0x10000018 0x4>;
-+      interrupt-controller;
-+      interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -129,6 +129,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_EXT_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
-       bool
-       select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP)                       += irq-mmp.o
- obj-$(CONFIG_IRQ_MXS)                 += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_CLPS711X_IRQCHIP)                += irq-clps711x.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,301 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE             IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE             0
-+#endif
-+
-+#define MAX_IRQS              4
-+
-+#define EXTIRQ_CFG_SENSE      0
-+#define EXTIRQ_CFG_STAT               1
-+#define EXTIRQ_CFG_CLEAR      2
-+#define EXTIRQ_CFG_MASK               3
-+#define EXTIRQ_CFG_BOTHEDGE   4
-+#define EXTIRQ_CFG_LEVELSENSE 5
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+
-+      int parent_irq[MAX_IRQS];
-+      void __iomem *reg;
-+      int shift;
-+      unsigned int toggle_clear_on_ack:1;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      unsigned int irq = irq_desc_get_irq(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_IRQS; idx++) {
-+              if (data->parent_irq[idx] != irq)
-+                      continue;
-+
-+              generic_handle_irq(irq_find_mapping(data->domain, idx));
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)),
-+                   priv->reg);
-+      if (priv->toggle_clear_on_ack)
-+              __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift));
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift);
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+                                   unsigned int flow_type)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      bool levelsense = 0, sense = 0, bothedge = 0;
-+      u32 reg;
-+
-+      flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+      if (flow_type == IRQ_TYPE_NONE)
-+              flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+      switch (flow_type) {
-+      case IRQ_TYPE_EDGE_BOTH:
-+              bothedge = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_RISING:
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_FALLING:
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_HIGH:
-+              levelsense = 1;
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_LOW:
-+              levelsense = 1;
-+              break;
-+
-+      default:
-+              pr_err("bogus flow type combination given!\n");
-+              return -EINVAL;
-+      }
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+
-+      if (levelsense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+      if (sense)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift));
-+      if (bothedge)
-+              reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+      else
-+              reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+
-+      irqd_set_trigger_type(data, flow_type);
-+      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+              irq_set_handler_locked(data, handle_level_irq);
-+      else
-+              irq_set_handler_locked(data, handle_edge_irq);
-+
-+      return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+                              irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+      .xlate = irq_domain_xlate_twocell,
-+      .map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+                                        int num_irqs, int *irqs,
-+                                        void __iomem *reg, int shift,
-+                                        bool toggle_clear_on_ack)
-+{
-+      struct intc_data *data;
-+      unsigned int i;
-+      int start = VIRQ_BASE;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              data->parent_irq[i] = irqs[i];
-+
-+              irq_set_handler_data(irqs[i], data);
-+              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+      }
-+
-+      data->reg = reg;
-+      data->shift = shift;
-+      data->toggle_clear_on_ack = toggle_clear_on_ack;
-+
-+      data->chip.name = "bcm6345-ext-intc";
-+      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+      /*
-+       * If we have less than 4 irqs, this is the second controller on
-+       * bcm63xx. So increase the VIRQ start to not overlap with the first
-+       * one, but only do so if we actually use a non-zero start.
-+       *
-+       * This can be removed when bcm63xx has no legacy users anymore.
-+       */
-+      if (start && num_irqs < 4)
-+              start += 4;
-+
-+      data->domain = irq_domain_add_simple(node, num_irqs, start,
-+                                           &bcm6345_ext_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -ENOMEM;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+                                int shift)
-+{
-+      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+                                         struct device_node *parent)
-+{
-+      int num_irqs, ret = -EINVAL;
-+      unsigned i;
-+      void __iomem *base;
-+      int irqs[MAX_IRQS] = { 0 };
-+      u32 shift;
-+      bool toggle_clear_on_ack = false;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (!num_irqs || num_irqs > MAX_IRQS)
-+              return -EINVAL;
-+
-+      if (of_property_read_u32(node, "brcm,field-width", &shift))
-+              shift = 4;
-+
-+      /* on BCM6318 setting CLEAR seems to continuously mask interrupts */
-+      if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc"))
-+              toggle_clear_on_ack = true;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      base = of_iomap(node, 0);
-+      if (!base)
-+              goto out_unmap;
-+
-+      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift,
-+                                    toggle_clear_on_ack);
-+      if (!ret)
-+              return 0;
-+out_unmap:
-+      iounmap(base);
-+
-+      for (i = 0; i < num_irqs; i++)
-+              irq_dispose_mapping(irqs[i]);
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/brcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/brcm63xx/patches-4.19/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644 (file)
index f0ffc65..0000000
+++ /dev/null
@@ -1,695 +0,0 @@
-From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |   3 +
- arch/mips/bcm63xx/irq.c | 612 +++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 507 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -283,6 +283,9 @@ config BCM63XX
-       select SYNC_R4K
-       select DMA_NONCOHERENT
-       select IRQ_MIPS_CPU
-+      select BCM6345_EXT_IRQ
-+      select BCM6345_PERIPH_IRQ
-+      select IRQ_DOMAIN
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -11,7 +11,9 @@
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -19,544 +21,140 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--      if (irq < 4)
--              return ext_irq_cfg_reg1;
--      return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--      if (is_ext_irq_cascaded &&
--          intbit >= ext_irq_start && intbit <= ext_irq_end)
--              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--      else
--              do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--                                   const struct cpumask *m)
--{
--      bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--      if (m)
--              enable &= cpumask_test_cpu(cpu, m);
--      else if (irqd_affinity_was_set(d))
--              enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d));
--#endif
--      return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(int cpu)                             \
--{                                                                     \
--      u32 pending[width / 32];                                        \
--      unsigned int src, tgt;                                          \
--      bool irqs_pending = false;                                      \
--      static unsigned int i[2];                                       \
--      unsigned int *next = &i[cpu];                                   \
--      unsigned long flags;                                            \
--                                                                      \
--      /* read registers in reverse order */                           \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
--              u32 val;                                                \
--                                                                      \
--              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--              pending[--tgt] = val;                                   \
--                                                                      \
--              if (val)                                                \
--                      irqs_pending = true;                            \
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--                                                                      \
--      if (!irqs_pending)                                              \
--              return;                                                 \
--                                                                      \
--      while (1) {                                                     \
--              unsigned int to_call = *next;                           \
--                                                                      \
--              *next = (*next + 1) & (width - 1);                      \
--              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
--                      handle_internal(to_call);                       \
--                      break;                                          \
--              }                                                       \
--      }                                                               \
--}                                                                     \
--                                                                      \
--static void __internal_irq_mask_##width(struct irq_data *d)           \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              val &= ~(1 << bit);                                     \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}                                                                     \
--                                                                      \
--static void __internal_irq_unmask_##width(struct irq_data *d,         \
--                                        const struct cpumask *m)      \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              if (enable_irq_for_cpu(cpu, d, m))                      \
--                      val |= (1 << bit);                              \
--              else                                                    \
--                      val &= ~(1 << bit);                             \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--      u32 cause;
--
--      do {
--              cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--              if (!cause)
--                      break;
--
--              if (cause & CAUSEF_IP7)
--                      do_IRQ(7);
--              if (cause & CAUSEF_IP0)
--                      do_IRQ(0);
--              if (cause & CAUSEF_IP1)
--                      do_IRQ(1);
--              if (cause & CAUSEF_IP2)
--                      dispatch_internal(0);
--              if (is_ext_irq_cascaded) {
--                      if (cause & CAUSEF_IP3)
--                              dispatch_internal(1);
--              } else {
--                      if (cause & CAUSEF_IP3)
--                              do_IRQ(IRQ_EXT_0);
--                      if (cause & CAUSEF_IP4)
--                              do_IRQ(IRQ_EXT_1);
--                      if (cause & CAUSEF_IP5)
--                              do_IRQ(IRQ_EXT_2);
--                      if (cause & CAUSEF_IP6)
--                              do_IRQ(IRQ_EXT_3);
--              }
--      } while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--      internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--      internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--                                  NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--                                       unsigned int flow_type)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      int levelsense, sense, bothedge;
--      unsigned long flags;
--
--      flow_type &= IRQ_TYPE_SENSE_MASK;
--
--      if (flow_type == IRQ_TYPE_NONE)
--              flow_type = IRQ_TYPE_LEVEL_LOW;
--
--      levelsense = sense = bothedge = 0;
--      switch (flow_type) {
--      case IRQ_TYPE_EDGE_BOTH:
--              bothedge = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_RISING:
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_FALLING:
--              break;
--
--      case IRQ_TYPE_LEVEL_HIGH:
--              levelsense = 1;
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_LEVEL_LOW:
--              levelsense = 1;
--              break;
--
--      default:
--              pr_err("bogus flow type combination given !\n");
--              return -EINVAL;
--      }
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--      irq %= 4;
--
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6348_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              break;
--
--      case BCM3368_CPU_ID:
--      case BCM6328_CPU_ID:
--      case BCM6338_CPU_ID:
--      case BCM6345_CPU_ID:
--      case BCM6358_CPU_ID:
--      case BCM6362_CPU_ID:
--      case BCM6368_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--              break;
--      default:
--              BUG();
--      }
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      irqd_set_trigger_type(d, flow_type);
--      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--              irq_set_handler_locked(d, handle_level_irq);
--      else
--              irq_set_handler_locked(d, handle_edge_irq);
--
--      return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--                                       const struct cpumask *dest,
--                                       bool force)
--{
--      if (!irqd_irq_disabled(data))
--              internal_irq_unmask(data, dest);
--
--      return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--      .name           = "bcm63xx_ipic",
--      .irq_mask       = bcm63xx_internal_irq_mask,
--      .irq_unmask     = bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--      .name           = "bcm63xx_epic",
--      .irq_ack        = bcm63xx_external_irq_clear,
--
--      .irq_mask       = bcm63xx_external_irq_mask,
--      .irq_unmask     = bcm63xx_external_irq_unmask,
--
--      .irq_set_type   = bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip2",
--      .flags          = IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip3",
--      .flags          = IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_extirq",
--      .flags          = IRQF_NO_THREAD,
--};
--
--static void bcm63xx_init_irq(void)
-+void __init arch_init_irq(void)
- {
--      int irq_bits;
--
--      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+      void __iomem *periph_bases[2];
-+      void __iomem *ext_intc_bases[2];
-+      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+      int periph_irqs[2] = { 2, 3 };
-+      int ext_irqs[6];
-+
-+      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              periph_bases[0] += PERF_IRQMASK_3368_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6328_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+              periph_bases[0] += PERF_IRQMASK_6338_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+              periph_bases[0] += PERF_IRQMASK_6345_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+              periph_bases[0] += PERF_IRQMASK_6348_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 5;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--              irq_bits = 32;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--              irq_bits = 64;
-+              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
-               ext_irq_count = 6;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+              ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+              ext_shift = 4;
-               break;
-       default:
-               BUG();
-       }
--      if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal_32;
--              internal_irq_mask = __internal_irq_mask_32;
--              internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
--              dispatch_internal = __dispatch_internal_64;
--              internal_irq_mask = __internal_irq_mask_64;
--              internal_irq_unmask = __internal_irq_unmask_64;
--      }
--}
--
--void __init arch_init_irq(void)
--{
--      int i;
--
--      bcm63xx_init_irq();
-       mips_cpu_irq_init();
--      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--                                       handle_level_irq);
--
--      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--                                       handle_edge_irq);
--
--      if (!is_ext_irq_cascaded) {
--              for (i = 3; i < 3 + ext_irq_count; ++i)
--                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--      }
--
--      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--      if (is_ext_irq_cascaded) {
--              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--              bcm63xx_internal_irq_chip.irq_set_affinity =
--                      bcm63xx_internal_set_affinity;
--
--              cpumask_clear(irq_default_affinity);
--              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--      }
--#endif
-+      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
-+                               periph_width);
-+      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+      if (ext_irq_count > 4)
-+              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+                                    ext_shift);
- }
diff --git a/target/linux/brcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/brcm63xx/patches-4.19/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644 (file)
index e911f0e..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -108,11 +108,14 @@ void __init arch_init_irq(void)
-               periph_width = 1;
-               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--              ext_irq_count = 4;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+              ext_irq_count = 6;
-               ext_irqs[0] = BCM_6358_EXT_IRQ0;
-               ext_irqs[1] = BCM_6358_EXT_IRQ1;
-               ext_irqs[2] = BCM_6358_EXT_IRQ2;
-               ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6358_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -896,6 +896,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -244,6 +244,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
- /* for 6348 only */
diff --git a/target/linux/brcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-4.19/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644 (file)
index 07d3f9d..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- };
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+      return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
-@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_3368() \
-+      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-4.19/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644 (file)
index 57af836..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT                       12
-+#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
- #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/brcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/brcm63xx/patches-4.19/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644 (file)
index a05a4b3..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-       chipid_reg = 0;
-@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+              else if (varid == 3)
-+                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
-               break;
-       case BCM6338_CPU_ID:
-               bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -12,6 +12,8 @@
-  */
- #define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
-+#define BCM63281_CPU_ID               0x63281
-+#define BCM63283_CPU_ID               0x63283
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
-@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
-       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-4.19/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644 (file)
index 2efbf36..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6362_CPU_ID:
-               bcm63xx_regs_base = bcm6362_regs_base;
-               bcm63xx_irqs = bcm6362_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+              else if (varid == 2)
-+                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
-               break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -18,6 +18,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
-       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/brcm63xx/patches-4.19/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644 (file)
index 64bcd8f..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       case BCM6368_CPU_ID:
-+      case BCM6369_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
-+
-+              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+              bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,7 @@
- #define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-+#define BCM6369_CPU_ID                0x6369
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-4.19/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644 (file)
index 54900d7..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -42,7 +42,7 @@
-                                       BCM_CB_MEM_SIZE - 1)
- #define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
-                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/brcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-4.19/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644 (file)
index 05142a8..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,10 +41,10 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
--#define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
--                                      BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-+                                      BCM_PCIE_MEM_SIZE_6328 - 1)
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- static struct resource bcm_pcie_mem_resource = {
-       .name   = "bcm63xx PCIe memory space",
--      .start  = BCM_PCIE_MEM_BASE_PA,
--      .end    = BCM_PCIE_MEM_END_PA,
-+      .start  = 0,
-+      .end    = 0,
-       .flags  = IORESOURCE_MEM,
- };
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-       /* set bar0 to little endian */
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-       val |= BASEMASK_REMAP_EN;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-       register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      }
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-4.19/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644 (file)
index c38b431..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
--      u16 cpu_id = bcm63xx_get_cpu_id();
-+      u32 cpu_id = bcm63xx_get_cpu_id();
-       switch (cpu_id) {
-       case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
-       switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c
-       return cpu_id;
- }
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--      const u16 cpu_id = bcm63xx_cpu_id;
-+      const u32 cpu_id = bcm63xx_cpu_id;
-       return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/brcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-4.19/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644 (file)
index 1809a3c..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -2,10 +2,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- #define IRQ_INTERNAL_BASE             8
--#define IRQ_EXTERNAL_BASE             100
-+#define NR_INTERNAL_IRQS              128
-+#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -2,7 +2,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.19/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 54ec472..0000000
+++ /dev/null
@@ -1,737 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+      bool "support 63268 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-+      select HW_HAS_PCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk,
-                       clk_disable_unlocked(&clk_swpkt_sar);
-               }
-               bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
-       } else {
-               return;
-       }
-@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-       else
-               return;
-@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
-       else
-               return;
-@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
--      else
--              /* BCMCPU_IS_6368 */
-+      else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_SPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_SPI_EN;
-+      else
-+              return;
-+
-       bcm_hwclock_set(mask, enable);
- }
-@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_HSSPI_EN;
-       else
-               return;
-@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
- };
-+static struct clk_lookup bcm63268_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbd),
-+      CLKDEV_INIT(NULL, "spi", &clk_spi),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM6368_CPU_ID:
-               clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
-               break;
-+      case BCM63268_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
-+              clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks));
-+              break;
-       }
-       return 0;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- };
-+static const unsigned long bcm63268_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
-       return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
-               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
-       }
-+      case BCM63268_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+                              STRAPBUS_63268_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x3:
-+              case 0xe:
-+                      return 320000000;
-+              case 0xa:
-+                      return 333000000;
-+              case 0x2:
-+              case 0xb:
-+              case 0xf:
-+                      return 400000000;
-+              default:
-+                      return 0;
-+              }
-+      }
-       default:
-               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      bool long_chipid = false;
-       u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
-               case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
-                       break;
-+              case 0x80:
-+                      long_chipid = true;
-+                      /* fall-through */
-               default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-                       break;
-@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       }
-+
-       /*
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
--      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+      if (long_chipid) {
-+              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+      } else {
-+              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      }
-+
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
-               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-               bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-+      case BCM63168_CPU_ID:
-+      case BCM63169_CPU_ID:
-+      case BCM63268_CPU_ID:
-+      case BCM63269_CPU_ID:
-+              bcm63xx_regs_base = bcm63268_regs_base;
-+              bcm63xx_irqs = bcm63268_irqs;
-+
-+              bcm63xx_cpu_id = BCM63268_CPU_ID;
-+              break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-               break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               }
-+      case BCM63268_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       default:
-               return -EINVAL;
-       }
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void)
-       }
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368()) {
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
-               bcm63xx_spi_device.name = "bcm6358-spi",
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-       }
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -149,6 +149,20 @@ void __init arch_init_irq(void)
-               ext_irqs[5] = BCM_6368_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-+      case BCM63268_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+              ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+              ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+              ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+              ext_shift = 4;
-+              break;
-       default:
-               BUG();
-       }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -126,6 +126,20 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET   0
-+#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL    0
-+#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY   0
-+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI    0
-+#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
-+                               SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6368)
- };
-+static const u32 bcm63268_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
-@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-+      } else if (BCMCPU_IS_63268()) {
-+              reset_reg = PERF_SOFTRESET_63268_REG;
-+              bcm63xx_reset_bits = bcm63268_reset_bits;
-       }
-       return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -22,6 +22,10 @@
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- #define BCM6369_CPU_ID                0x6369
-+#define BCM63168_CPU_ID               0x63168
-+#define BCM63169_CPU_ID               0x63169
-+#define BCM63268_CPU_ID               0x63268
-+#define BCM63269_CPU_ID               0x63269
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
-               case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+              case BCM63268_CPU_ID:
-+#endif
-               break;
-       default:
-               unreachable();
-@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
-       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -574,6 +591,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE             (0xb0004180)
- #define BCM_6368_MISC_BASE            (0xdeadbeef)
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
-+#define BCM_63268_PERF_BASE           (0xb0000000)
-+#define BCM_63268_TIMER_BASE          (0xb0000080)
-+#define BCM_63268_WDT_BASE            (0xb000009c)
-+#define BCM_63268_UART0_BASE          (0xb0000180)
-+#define BCM_63268_UART1_BASE          (0xb00001a0)
-+#define BCM_63268_GPIO_BASE           (0xb00000c0)
-+#define BCM_63268_SPI_BASE            (0xb0000800)
-+#define BCM_63268_HSSPI_BASE          (0xb0001000)
-+#define BCM_63268_UDC0_BASE           (0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE         (0xb000c800)
-+#define BCM_63268_OHCI0_BASE          (0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
-+#define BCM_63268_USBD_BASE           (0xb0002400)
-+#define BCM_63268_MPI_BASE            (0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
-+#define BCM_63268_PCIE_BASE           (0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
-+#define BCM_63268_DSL_BASE            (0xdeadbeef)
-+#define BCM_63268_UBUS_BASE           (0xdeadbeef)
-+#define BCM_63268_ENET0_BASE          (0xdeadbeef)
-+#define BCM_63268_ENET1_BASE          (0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE                (0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
-+#define BCM_63268_ENETSW_BASE         (0xb0700000)
-+#define BCM_63268_EHCI0_BASE          (0xb0002500)
-+#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
-+#define BCM_63268_MEMC_BASE           (0xdeadbeef)
-+#define BCM_63268_DDR_BASE            (0xb0003000)
-+#define BCM_63268_M2M_BASE            (0xdeadbeef)
-+#define BCM_63268_ATM_BASE            (0xdeadbeef)
-+#define BCM_63268_XTM_BASE            (0xb0007000)
-+#define BCM_63268_XTMDMA_BASE         (0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_PCM_BASE            (0xb000b000)
-+#define BCM_63268_PCMDMA_BASE         (0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_RNG_BASE            (0xdeadbeef)
-+#define BCM_63268_MISC_BASE           (0xb0001800)
- extern const unsigned long *bcm63xx_regs_base;
-@@ -1042,6 +1105,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ            0
-+#define BCM_63268_ENET0_IRQ           0
-+#define BCM_63268_ENET1_IRQ           0
-+#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ          0
-+#define BCM_63268_ENET0_RXDMA_IRQ     0
-+#define BCM_63268_ENET0_TXDMA_IRQ     0
-+#define BCM_63268_ENET1_RXDMA_IRQ     0
-+#define BCM_63268_ENET1_TXDMA_IRQ     0
-+#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ             0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio
-               return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-+      case BCM63268_CPU_ID:
-+              return 52;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,6 +10,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT         12
-+#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT                       12
- #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
-@@ -212,6 +214,52 @@
-                                       CKCTL_6368_NAND_EN |            \
-                                       CKCTL_6368_IPSEC_EN)
-+#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
-+#define CKCTL_63268_VDSL_EN           (1 << 3)
-+#define CKCTL_63268_MIPS_EN           (1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
-+#define CKCTL_63268_DECT_EN           (1 << 6)
-+#define CKCTL_63268_FAP0_EN           (1 << 7)
-+#define CKCTL_63268_FAP1_EN           (1 << 8)
-+#define CKCTL_63268_SAR_EN            (1 << 9)
-+#define CKCTL_63268_ROBOSW_EN         (1 << 10)
-+#define CKCTL_63268_PCM_EN            (1 << 11)
-+#define CKCTL_63268_USBD_EN           (1 << 12)
-+#define CKCTL_63268_USBH_EN           (1 << 13)
-+#define CKCTL_63268_IPSEC_EN          (1 << 14)
-+#define CKCTL_63268_SPI_EN            (1 << 15)
-+#define CKCTL_63268_HSSPI_EN          (1 << 16)
-+#define CKCTL_63268_PCIE_EN           (1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
-+#define CKCTL_63268_GMAC_EN           (1 << 19)
-+#define CKCTL_63268_NAND_EN           (1 << 20)
-+#define CKCTL_63268_TBUS_EN           (1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
-+                                      CKCTL_63268_VDSL_AFE_EN |       \
-+                                      CKCTL_63268_VDSL_EN |           \
-+                                      CKCTL_63268_WLAN_OCP_EN |       \
-+                                      CKCTL_63268_DECT_EN |           \
-+                                      CKCTL_63268_FAP0_EN |           \
-+                                      CKCTL_63268_FAP1_EN |           \
-+                                      CKCTL_63268_SAR_EN |            \
-+                                      CKCTL_63268_ROBOSW_EN |         \
-+                                      CKCTL_63268_PCM_EN |            \
-+                                      CKCTL_63268_USBD_EN |           \
-+                                      CKCTL_63268_USBH_EN |           \
-+                                      CKCTL_63268_IPSEC_EN |          \
-+                                      CKCTL_63268_SPI_EN |            \
-+                                      CKCTL_63268_HSSPI_EN |          \
-+                                      CKCTL_63268_PCIE_EN |           \
-+                                      CKCTL_63268_PHYMIPS_EN |        \
-+                                      CKCTL_63268_GMAC_EN |           \
-+                                      CKCTL_63268_NAND_EN |           \
-+                                      CKCTL_63268_TBUS_EN |           \
-+                                      CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
-@@ -225,6 +273,7 @@
- #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-@@ -235,6 +284,7 @@
- #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-@@ -245,6 +295,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG_63268     0x18
- #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -275,6 +326,7 @@
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
-+#define PERF_SOFTRESET_63268_REG      0x10
- #define SOFTRESET_3368_SPI_MASK               (1 << 0)
- #define SOFTRESET_3368_ENET_MASK      (1 << 2)
-@@ -368,6 +420,26 @@
- #define SOFTRESET_6368_USBH_MASK      (1 << 12)
- #define SOFTRESET_6368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_63268_SPI_MASK      (1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
-+#define SOFTRESET_63268_SAR_MASK      (1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
-+#define SOFTRESET_63268_USBS_MASK     (1 << 5)
-+#define SOFTRESET_63268_USBH_MASK     (1 << 6)
-+#define SOFTRESET_63268_PCM_MASK      (1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
-+#define SOFTRESET_63268_DECT_MASK     (1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG           0x34
- #define MIPSPLLCTL_N1_SHIFT           20
-@@ -1367,6 +1439,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+#define MISC_STRAPBUS_63268_REG               0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT     21
-+#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
-               break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -184,7 +184,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+              BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -292,7 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -313,6 +315,8 @@ bcm63xx_enetsw_register(const struct bcm
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      else if (BCMCPU_IS_63268())
-+              enetsw_pd.num_ports = ENETSW_PORTS_63268;
-       enetsw_pd.dma_has_sram = true;
-       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT       8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/brcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.19/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644 (file)
index e9f9e2b..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -137,7 +137,8 @@
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
- #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK)
-+                               SOFTRESET_63268_PCIE_CORE_MASK | \
-+                               SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -46,6 +46,11 @@
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-                                       BCM_PCIE_MEM_SIZE_6328 - 1)
-+#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
-+                                      BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
-       }
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.19/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644 (file)
index b6119e9..0000000
+++ /dev/null
@@ -1,697 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -19,6 +19,11 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_6318
-+      bool "support 6318 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -697,7 +697,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i
- {
-       u32 mask;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318())
-+              mask = CKCTL_6318_HSSPI_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
- };
-+static struct clk_lookup bcm6318_clks[] = {
-+      /* fixed rate clocks */
-+      CLKDEV_INIT(NULL, "periph", &clk_periph),
-+      CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      /* gated clocks */
-+      CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-+      CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-+      CLKDEV_INIT(NULL, "usbd", &clk_usbh),
-+      CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
-+      CLKDEV_INIT(NULL, "pcie", &clk_pcie),
-+};
-+
- static struct clk_lookup bcm6328_clks[] = {
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "pcie", &clk_pcie),
- };
-+#define HSSPI_PLL_HZ_6318     250000000
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void)
-       case BCM3368_CPU_ID:
-               clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
-               break;
-+      case BCM6318_CPU_ID:
-+              clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318;
-+              clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks));
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
-               clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
-       __GEN_CPU_IRQ_TABLE(3368)
- };
-+static const unsigned long bcm6318_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
-       return bcm63xx_memory_size;
- }
-+#define STRAP_OVERRIDE_BUS_REG                0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
-       u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
-       case BCM3368_CPU_ID:
-               return 300000000;
-+      case BCM6318_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+              pr_info("strap_override_bus = %08x\n", tmp);
-+
-+              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+              switch (mips_pll_fcvo) {
-+              case 0:
-+                      return 166000000;
-+              case 1:
-+                      return 400000000;
-+              case 2:
-+                      return 250000000;
-+              case 3:
-+                      return 333000000;
-+              };
-+      }
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
-+      if (BCMCPU_IS_6318()) {
-+              val = bcm_sdram_readl(SDRAM_CFG_REG);
-+              val = val & SDRAM_CFG_6318_SPACE_MASK;
-+              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+              return 1 << (val + 20);
-+      }
-+
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
-       switch (current_cpu_type()) {
-       case CPU_BMIPS3300:
-+              if ((read_c0_prid() & 0xff) >= 0x33) {
-+                      /* BCM6318 */
-+                      chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-+
-               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
-               /* fall-through */
-@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-+      case BCM6318_CPU_ID:
-+              bcm63xx_regs_base = bcm6318_regs_base;
-+              bcm63xx_irqs = bcm6318_irqs;
-+              break;
-       case BCM3368_CPU_ID:
-               bcm63xx_regs_base = bcm3368_regs_base;
-               bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
-       u32 val;
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              /* only support serial flash */
-+              return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -48,6 +48,19 @@ void __init arch_init_irq(void)
-               ext_irqs[3] = BCM_3368_EXT_IRQ3;
-               ext_shift = 4;
-               break;
-+      case BCM6318_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_6318_REG;
-+              periph_irq_count = 1;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+              ext_shift = 4;
-+              break;
-       case BCM6328_CPU_ID:
-               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -68,7 +68,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -44,6 +44,23 @@
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+
-+#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET    0
-+#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL     0
-+#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM     0
-+#define BCM6318_RESET_MPI     0
-+#define BCM6318_RESET_PCIE    \
-+                              (SOFTRESET_6318_PCIE_MASK |             \
-+                               SOFTRESET_6318_PCIE_CORE_MASK |        \
-+                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
- #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
-@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(3368)
- };
-+static const u32 bcm6318_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6328)
- };
-@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini
-       if (BCMCPU_IS_3368()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm3368_reset_bits;
-+      } else if (BCMCPU_IS_6318()) {
-+              reset_reg = PERF_SOFTRESET_6318_REG;
-+              bcm63xx_reset_bits = bcm6318_reset_bits;
-       } else if (BCMCPU_IS_6328()) {
-               reset_reg = PERF_SOFTRESET_6328_REG;
-               bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM3368_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
-               bcm6348_a1_reboot();
-       pr_info("triggering watchdog soft-reset...\n");
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
-               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-       } else {
-               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID                0x3368
-+#define BCM6318_CPU_ID                0x6318
- #define BCM6328_CPU_ID                0x6328
- #define BCM63281_CPU_ID               0x63281
- #define BCM63283_CPU_ID               0x63283
-@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c
-               case BCM3368_CPU_ID:
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+              case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
-               case BCM6328_CPU_ID:
- #endif
-@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
-       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -253,6 +261,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE            (0xdeadbeef)
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6318_PERF_BASE            (0xb0000000)
-+#define BCM_6318_TIMER_BASE           (0xb0000040)
-+#define BCM_6318_WDT_BASE             (0xb0000068)
-+#define BCM_6318_UART0_BASE           (0xb0000100)
-+#define BCM_6318_UART1_BASE           (0xdeadbeef)
-+#define BCM_6318_GPIO_BASE            (0xb0000080)
-+#define BCM_6318_SPI_BASE             (0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE           (0xb0003000)
-+#define BCM_6318_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE          (0xb0006800)
-+#define BCM_6318_OHCI0_BASE           (0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
-+#define BCM_6318_USBD_BASE            (0xb0006000)
-+#define BCM_6318_MPI_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCIE_BASE            (0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6318_DSL_BASE             (0xdeadbeef)
-+#define BCM_6318_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6318_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6318_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE         (0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
-+#define BCM_6318_ENETSW_BASE          (0xb0080000)
-+#define BCM_6318_EHCI0_BASE           (0xb0005000)
-+#define BCM_6318_SDRAM_BASE           (0xb0004000)
-+#define BCM_6318_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6318_DDR_BASE             (0xdeadbeef)
-+#define BCM_6318_M2M_BASE             (0xdeadbeef)
-+#define BCM_6318_ATM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE          (0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_PCM_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_RNG_BASE             (0xdeadbeef)
-+#define BCM_6318_MISC_BASE            (0xb0000280)
-+#define BCM_6318_OTP_BASE             (0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE           (0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -775,6 +833,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ              0
-+#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ            0
-+#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ             0
-+#define BCM_6318_ENET0_IRQ            0
-+#define BCM_6318_ENET1_IRQ            0
-+#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ           0
-+#define BCM_6318_ENET0_RXDMA_IRQ      0
-+#define BCM_6318_ENET0_TXDMA_IRQ      0
-+#define BCM_6318_ENET1_RXDMA_IRQ      0
-+#define BCM_6318_ENET1_TXDMA_IRQ      0
-+#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ              0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -53,6 +53,39 @@
-                                        CKCTL_3368_EMUSB_EN | \
-                                        CKCTL_3368_USBU_EN)
-+#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
-+#define CKCTL_6318_USB_ASB_EN         (1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
-+#define CKCTL_6318_ADSL_EN            (1 << 11)
-+#define CKCTL_6318_SAR125_EN          (1 << 12)
-+#define CKCTL_6318_MIPS_EN            (1 << 13)
-+#define CKCTL_6318_PCIE_EN            (1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
-+#define CKCTL_6318_SDR_EN             (1 << 19)
-+#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN           (1 << 25)
-+#define CKCTL_6318_PCIE25_EN          (1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
-+                                      CKCTL_6318_ADSL_QPROC_EN |      \
-+                                      CKCTL_6318_ADSL_AFE_EN |        \
-+                                      CKCTL_6318_ADSL_EN |            \
-+                                      CKCTL_6318_SAR_EN  |            \
-+                                      CKCTL_6318_USB_EN |             \
-+                                      CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -260,12 +293,27 @@
-                                       CKCTL_63268_TBUS_EN |           \
-                                       CKCTL_63268_ROBOSW250_EN)
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG             0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
-+#define UB_CKCTL_6318_ARB_EN          (1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
-+#define UB_CKCTL_6318_SAR_EN          (1 << 7)
-+#define UB_CKCTL_6318_SDR_EN          (1 << 8)
-+#define UB_CKCTL_6318_USB_EN          (1 << 9)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
-+#define PERF_IRQMASK_6318_REG         0x20
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -277,6 +325,7 @@
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-+#define PERF_IRQSTAT_6318_REG         0x30
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -288,6 +337,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-+#define PERF_EXTIRQ_CFG_REG_6318      0x18
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -322,6 +372,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG            0x28
-+#define PERF_SOFTRESET_6318_REG               0x10
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
-@@ -335,6 +386,18 @@
- #define SOFTRESET_3368_USBS_MASK      (1 << 11)
- #define SOFTRESET_3368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_6318_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
-+#define SOFTRESET_6318_SAR_MASK               (1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
-+#define SOFTRESET_6318_USBS_MASK      (1 << 4)
-+#define SOFTRESET_6318_USBH_MASK      (1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
- #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
- #define SOFTRESET_6328_SAR_MASK               (1 << 2)
-@@ -506,8 +569,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
-+#define TIMER_IRQMASK_6318_REG                0x0
-+#define TIMER_IRQSTAT_6318_REG                0x4
-+#define IRQSTATMASK_TIMER0            (1 << 0)
-+#define IRQSTATMASK_TIMER1            (1 << 1)
-+#define IRQSTATMASK_TIMER2            (1 << 2)
-+#define IRQSTATMASK_TIMER3            (1 << 3)
-+#define IRQSTATMASK_WDT                       (1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
- #define TIMER_CTL0_REG                        0x4
- #define TIMER_CTL1_REG                        0x8
- #define TIMER_CTL2_REG                        0xC
-@@ -1254,6 +1326,8 @@
- #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT          13
- #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT    4
-+#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- #define SDRAM_MBASE_REG                       0xc
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re
-               if (offset >= 0xfff00000)
-                       return 1;
-               break;
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
-               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
-       int i;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-               return 0;
-       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -184,8 +184,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--              BCMCPU_IS_63268())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -293,8 +293,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--              !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -311,7 +311,7 @@ bcm63xx_enetsw_register(const struct bcm
-       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              return 50;
-       case BCM6328_CPU_ID:
-               return 32;
-       case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-4.19/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644 (file)
index e359311..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -29,7 +29,9 @@
-       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
-       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
-       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
--      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
-+      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
-+      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
-+      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
- #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
-@@ -43,6 +45,8 @@
- #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+#define BCM3368_RESET_PCIE_CORE       0
-+#define BCM3368_RESET_PCIE_HARD       0
- #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-@@ -55,11 +59,10 @@
- #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM     0
- #define BCM6318_RESET_MPI     0
--#define BCM6318_RESET_PCIE    \
--                              (SOFTRESET_6318_PCIE_MASK |             \
--                               SOFTRESET_6318_PCIE_CORE_MASK |        \
--                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
-@@ -71,11 +74,10 @@
- #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI     0
--#define BCM6328_RESET_PCIE    \
--                              (SOFTRESET_6328_PCIE_MASK |             \
--                               SOFTRESET_6328_PCIE_CORE_MASK |        \
--                               SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
- #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
-@@ -89,6 +91,8 @@
- #define BCM6338_RESET_MPI     0
- #define BCM6338_RESET_PCIE    0
- #define BCM6338_RESET_PCIE_EXT        0
-+#define BCM6338_RESET_PCIE_CORE       0
-+#define BCM6338_RESET_PCIE_HARD       0
- #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
-@@ -102,6 +106,8 @@
- #define BCM6348_RESET_MPI     0
- #define BCM6348_RESET_PCIE    0
- #define BCM6348_RESET_PCIE_EXT        0
-+#define BCM6348_RESET_PCIE_CORE       0
-+#define BCM6348_RESET_PCIE_HARD       0
- #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
-@@ -115,6 +121,8 @@
- #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6358_RESET_PCIE_CORE       0
-+#define BCM6358_RESET_PCIE_HARD       0
- #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET    0
-@@ -126,9 +134,10 @@
- #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI     0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD       0
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
-@@ -142,6 +151,8 @@
- #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM6368_RESET_PCIE_CORE       0
-+#define BCM6368_RESET_PCIE_HARD       0
- #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET   0
-@@ -153,10 +164,10 @@
- #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
--#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK | \
--                               SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -15,6 +15,8 @@ enum bcm63xx_core_reset {
-       BCM63XX_RESET_MPI,
-       BCM63XX_RESET_PCIE,
-       BCM63XX_RESET_PCIE_EXT,
-+      BCM63XX_RESET_PCIE_CORE,
-+      BCM63XX_RESET_PCIE_HARD,
- };
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+              mdelay(10);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+      }
-       mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-       mdelay(10);
diff --git a/target/linux/brcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.19/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 3d9835d..0000000
+++ /dev/null
@@ -1,333 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+      u32 reg;
-+
-+      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+      if (enable)
-+              reg |= mask;
-+      else
-+              reg &= ~mask;
-+      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -362,12 +374,17 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+      }
- }
- static struct clk clk_pcie = {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,6 +41,12 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
-+                                      BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1530,6 +1530,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
-+#define PCIE_SPECIFIC_REG             0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
-+
- #define PCIE_CONFIG2_REG              0x408
- #define CONFIG2_BAR1_SIZE_EN          1
- #define CONFIG2_BAR1_SIZE_MASK                0xf
-@@ -1575,7 +1586,54 @@
- #define PCIE_RC_INT_C                 (1 << 2)
- #define PCIE_RC_INT_D                 (1 << 3)
--#define PCIE_DEVICE_OFFSET            0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB      0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT     20
-+#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT      4
-+#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
-+#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN      1
-+
-+#define PCIE_HARD_DEBUG_REG           0x4204
-+#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
-+#define CPU_INT_PCIE_INTA             (1 << 1)
-+#define CPU_INT_PCIE_INTB             (1 << 2)
-+#define CPU_INT_PCIE_INTC             (1 << 3)
-+#define CPU_INT_PCIE_INTD             (1 << 4)
-+#define CPU_INT_PCIE_INTR             (1 << 5)
-+#define CPU_INT_PCIE_NMI              (1 << 6)
-+#define CPU_INT_PCIE_UBUS             (1 << 7)
-+#define CPU_INT_IPI                   (1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG                0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT                12
-+#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT         15
-+#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT         20
-+#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318               0x9000
-+#define PCIE_DEVICE_OFFSET_6328               0x8000
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
-@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- void __iomem *pci_iospace_start;
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
-       u32 val;
-       u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
-       mdelay(200);
- }
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
-       u32 val;
--      /* enable clock */
--      pcie_clk = clk_get(NULL, "pcie");
--      if (IS_ERR_OR_NULL(pcie_clk))
--              return -ENODEV;
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
--      clk_prepare_enable(pcie_clk);
-+      /* reset the PCIe core */
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+      mdelay(10);
-+      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+      val &= ~HARD_DEBUG_SERDES_IDDQ;
-+      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+      mdelay(200);
-+}
--      bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+      u32 val;
-       /* configure the PCIe bridge */
-       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
-       val |= OPT2_CFG_TYPE1_BD_SEL;
-       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+      /* set bar0 to little endian */
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+      val |= BASEMASK_REMAP_EN;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+      u32 val;
-+
-+      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+                      PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+             C2P_BASELIMIT_BASE_SHIFT;
-+
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+      /* set bar0 to little endian */
-+      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+                      PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+      u32 val;
-+
-+      /* enable clock */
-+      pcie_clk = clk_get(NULL, "pcie");
-+      if (IS_ERR_OR_NULL(pcie_clk))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(pcie_clk);
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+              bcm63xx_reset_pcie_gen1();
-+              bcm63xx_init_pcie_gen1();
-+      } else {
-+              bcm63xx_reset_pcie_gen2();
-+              bcm63xx_init_pcie_gen2();
-+      }
-+
-       /* setup class code as bridge */
-       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-       val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
-       val &= ~CONFIG2_BAR1_SIZE_MASK;
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
--      /* set bar0 to little endian */
--      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--      val |= BASEMASK_REMAP_EN;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
-       register_pci_controller(&bcm63xx_pcie_controller);
-       return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-       } else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
-       }
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-4.19/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644 (file)
index 298fffd..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+void __init bcm63xx_flash_detect(void)
-+{
-+      flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -17,6 +17,7 @@
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_flash.h>
- void __init prom_init(void)
- {
-@@ -52,6 +53,9 @@ void __init prom_init(void)
-       reg &= ~mask;
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
-+      /* detect and setup flash access */
-+      bcm63xx_flash_detect();
-+
-       /* do low level board init */
-       board_prom_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -8,6 +8,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-4.19/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644 (file)
index 329a156..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,6 +16,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/spi-nor.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+#define HSSPI_FLASH_CTRL_REG          0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK   0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
-+#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
-+#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
-+#define FLASH_CTRL_MB_EN              (1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
-       flash_type = bcm63xx_detect_flash_type();
-+
-+      /* ensure flash mapping has sane values */
-+      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+           BCMCPU_IS_63268())) {
-+              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+              if (val & FLASH_CTRL_MB_EN) {
-+                      /* cfe might configure non working dual-io mode */
-+                      val &= ~FLASH_CTRL_MB_EN;
-+                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+
-+                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+                      case FLASH_CTRL_ADDR_BYTES_3:
-+                              val |= SPINOR_OP_READ_FAST;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_4:
-+                              val |= SPINOR_OP_READ_FAST_4B;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_2:
-+                      default:
-+                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
-+                              return;
-+                      }
-+              } else {
-+                      /* ensure dummy bytes is set to 1 for _FAST reads */
-+                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
-+
-+                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B)
-+                              return;
-+
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+              }
-+
-+              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+      }
- }
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-4.19/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644 (file)
index a8eea5b..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+                              CKCTL_6318_ROBOSW025_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-       } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -220,18 +224,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--      else if (BCMCPU_IS_6348())
-+      } else if (BCMCPU_IS_6348()) {
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--      else if (BCMCPU_IS_6368())
-+      } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--      else
-+      } else {
-               return;
-+      }
-       if (enable)
-               msleep(100);
diff --git a/target/linux/brcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-4.19/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644 (file)
index 92c37c1..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -682,6 +682,12 @@
- #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
-+#define GPIO_PINMUX_SEL0_6318         0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- #define GPIO_PINMUX_OTHR_REG          0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -1000,6 +1006,7 @@
- #define USBH_PRIV_SWAP_6358_REG               0x0
- #define USBH_PRIV_SWAP_6368_REG               0x1c
-+#define USBH_PRIV_SWAP_6318_REG               0x0c
- #define USBH_PRIV_SWAP_USBD_SHIFT     6
- #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1025,6 +1032,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
-+
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -125,6 +125,15 @@ void __init board_early_setup(const stru
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+      }
-+#endif
- }
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318
-       bool "support 6318 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-4.19/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644 (file)
index cdff8d5..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -587,6 +587,9 @@
- #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
- #define TIMER_CTL_ENABLE_MASK         (1 << 31)
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG         0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1534,6 +1537,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT     21
- #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+#define MISC_IDDQ_CTRL_6328_REG               0x48
-+#define MISC_IDDQ_CTRL_63268_REG      0x4c
-+
-+#define IDDQ_CTRL_63268_USBH          (1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask,
-       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+      u32 offset;
-+      u32 reg;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+              offset = MISC_IDDQ_CTRL_6328_REG;
-+      else if (BCMCPU_IS_63268())
-+              offset = MISC_IDDQ_CTRL_63268_REG;
-+      else
-+              return;
-+
-+      reg = bcm_misc_readl(offset);
-+      if (enable)
-+              reg &= ~mask;
-+      else
-+              reg |= mask;
-+      bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in
-       } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-       } else if (BCMCPU_IS_63268()) {
-+              u32 reg;
-+
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+              if (enable)
-+                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+              else
-+                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
-       } else {
-               return;
-       }
diff --git a/target/linux/brcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-4.19/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644 (file)
index 41f48b9..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1034,11 +1034,18 @@
- #define USBH_PRIV_SETUP_6368_REG      0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT     5
-+#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
- #define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-4.19/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644 (file)
index 35c2ef6..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -40,6 +40,7 @@ struct board_info {
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
-+      unsigned int num_usbh_ports:2;
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp
-  */
- int __init board_register_devices(void)
- {
-+      int usbh_ports = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -186,14 +188,21 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-+      if ((board.has_ohci0 || board.has_ehci0)) {
-+              usbh_ports = board.num_usbh_ports;
-+
-+              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+                      usbh_ports = 1;
-+      }
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-       if (board.has_ehci0)
--              bcm63xx_ehci_register();
-+              bcm63xx_ehci_register(usbh_ports);
-       if (board.has_ohci0)
--              bcm63xx_ohci_register();
-+              bcm63xx_ohci_register(usbh_ports);
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
-       },
- };
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-+      bcm63xx_ehci_pdata.num_ports = num_ports;       
-+
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-       ehci_resources[0].end = ehci_resources[0].start;
-       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-       .no_big_frame_no        = 1,
--      .num_ports              = 1,
-       .power_on               = bcm63xx_ohci_power_on,
-       .power_off              = bcm63xx_ohci_power_off,
-       .power_suspend          = bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
-       },
- };
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
-       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-               return -ENODEV;
-+      bcm63xx_ohci_pdata.num_ports = num_ports;
-+
-       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-       ohci_resources[0].end = ohci_resources[0].start;
-       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-4.19/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-4.19/351-set-board-usbh-ports.patch
deleted file mode 100644 (file)
index 531adc9..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -576,6 +576,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-       .leds = {
-               {
diff --git a/target/linux/brcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/brcm63xx/patches-4.19/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644 (file)
index deca226..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,11 +1,10 @@
- # SPDX-License-Identifier: GPL-2.0
--choice
--      prompt "Board support"
-+menu "Board support"
-       depends on BCM63XX
--      default BOARD_BCM963XX
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      default y
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -686,7 +686,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
-       unsigned int i;
-       u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -13,6 +13,8 @@
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -30,6 +32,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #define PFX   "board: "
- static struct board_info board;
-@@ -80,6 +84,15 @@ const char *board_get_name(void)
-       return board.name;
- }
-+void __init board_prom_init(void)
-+{
-+      /* detect bootloader */
-+      if (fw_arg3 == CFE_EPTSEAL)
-+              board_bcm963xx_init();
-+      else
-+              panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/brcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644 (file)
index 846f0b8..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
-       },
- };
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+      mtd_resources[0].start = start;
-+      mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
--              /* read base address of boot chip select (0) */
--              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--              val &= MPI_CSBASE_BASE_MASK;
--              mtd_resources[0].start = val;
--              mtd_resources[0].end = 0x1FFFFFFF;
-+              if (!mtd_resources[0].start) {
-+                      /* read base address of boot chip select (0) */
-+                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+                      val &= MPI_CSBASE_BASE_MASK;
-+
-+                      mtd_resources[0].start = val;
-+                      mtd_resources[0].end = 0x1FFFFFFF;
-+              }
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -10,6 +10,8 @@ enum {
- void bcm63xx_flash_detect(void);
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/brcm63xx/patches-4.19/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644 (file)
index 886fb2d..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-+                 sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -39,44 +39,6 @@
- static struct board_info board;
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -220,15 +183,10 @@ int __init board_register_devices(void)
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err(PFX "failed to register fallback SPROM\n");
--      }
--#endif
-+
-+      if (board_get_mac_address(mac) ||
-+          bcm63xx_register_fallback_sprom(mac))
-+              pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+{
-+      int ret = 0;
-+
-+#ifdef CONFIG_SSB_PCIHOST
-+      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#endif
-+      return ret;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FALLBACK_SPROM
-+#define __BCM63XX_FALLBACK_SPROM
-+
-+int bcm63xx_register_fallback_sprom(u8 *mac);
-+
-+#endif
diff --git a/target/linux/brcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/brcm63xx/patches-4.19/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch
deleted file mode 100644 (file)
index d0e37ef..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:43:49 +0200
-Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom
-
-Similar to ethernet setup, use a platform data struct for passing
-the mac. This eliminates the requirement to allocate an array on
-stack for the mac passed.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c                     | 6 ++----
- arch/mips/bcm63xx/sprom.c                                   | 8 ++++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h         | 4 ++++
- 4 files changed, 17 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
--      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -184,8 +183,8 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(mac) ||
--          bcm63xx_register_fallback_sprom(mac))
-+      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss
- }
- #endif
--int __init bcm63xx_register_fallback_sprom(u8 *mac)
-+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
--      memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FALLBACK_SPROM
- #define __BCM63XX_FALLBACK_SPROM
--int bcm63xx_register_fallback_sprom(u8 *mac);
-+#include <linux/if_ether.h>
-+
-+struct fallback_sprom_data {
-+      u8 mac_addr[ETH_ALEN];
-+};
-+
-+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -7,6 +7,7 @@
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-+#include <bcm63xx_fallback_sprom.h>
- /*
-  * flash mapping
-@@ -50,6 +51,9 @@ struct board_info {
-       /* External PHY reset GPIO flags from gpio.h */
-       unsigned long ephy_reset_gpio_flags;
-+
-+      /* fallback sprom config */
-+      struct fallback_sprom_data fallback_sprom;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/brcm63xx/patches-4.19/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch
deleted file mode 100644 (file)
index f540eab..0000000
+++ /dev/null
@@ -1,140 +0,0 @@
-From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:52:56 +0200
-Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
-
-Some devices do not provide enough mac addresses to populate wifi in
-addition to ethernet.
-
-Use having pci enabled as a rough heuristic which boards should have it
-enabled.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           | 12 ++++++++++++
- arch/mips/bcm63xx/boards/board_common.c             |  5 +++--
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  1 +
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -70,6 +70,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-+      .use_fallback_sprom             = 1,
-       .usbd = {
-               .use_fullspeed          = 0,
-@@ -219,6 +220,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -264,6 +266,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -316,6 +319,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -370,6 +374,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -420,6 +425,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -443,6 +449,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -461,6 +468,7 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-       .has_enet0                      = 1,
-@@ -483,6 +491,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -509,6 +518,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -561,6 +571,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
-@@ -632,6 +643,7 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-       .enet0 = {
-               .has_phy                = 1,
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -183,8 +183,9 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
--      if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
--          bcm63xx_register_fallback_sprom(&board.fallback_sprom))
-+      if (board.use_fallback_sprom &&
-+          (board_get_mac_address(board.fallback_sprom.mac_addr) ||
-+           bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -33,6 +33,7 @@ struct board_info {
-       unsigned int    has_usbd:1;
-       unsigned int    has_uart0:1;
-       unsigned int    has_uart1:1;
-+      unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/brcm63xx/patches-4.19/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch
deleted file mode 100644 (file)
index 0c4a9be..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:58:38 +0200
-Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom
-
-Different chips require different sprom contents, so prepare for
-supplying the appropriate sprom type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                   | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  5 +++++
- 2 files changed, 17 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -22,7 +22,7 @@
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-       .country_code           = 0x0,
-@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom =
-       .boardflags_hi          = 0x0000,
- };
-+static struct ssb_sprom bcm63xx_sprom;
-+
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      switch (data->type) {
-+      case SPROM_DEFAULT:
-+              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_sprom));
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -3,8 +3,13 @@
- #include <linux/if_ether.h>
-+enum sprom_type {
-+      SPROM_DEFAULT, /* default fallback sprom */
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-+      enum sprom_type type;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/brcm63xx/patches-4.19/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch
deleted file mode 100644 (file)
index 42502eb..0000000
+++ /dev/null
@@ -1,517 +0,0 @@
-From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:16:36 +0200
-Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms
-
-Allow using raw sprom content as templates.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 482 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+
-+/* FIXME: use lib_sprom after submission upstream */
-+
-+/* Get the word-offset for a SSB_SPROM_XXX define. */
-+#define SPOFF(offset) ((offset) / sizeof(u16))
-+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-+#define SPEX16(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift)       \
-+      out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+                         in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+      SPEX16(_outvar, _offset, _mask, _shift)
-+
-+#define SPEX_ARRAY8(_field, _offset, _mask, _shift)   \
-+      do {    \
-+              SPEX(_field[0], _offset +  0, _mask, _shift);   \
-+              SPEX(_field[1], _offset +  2, _mask, _shift);   \
-+              SPEX(_field[2], _offset +  4, _mask, _shift);   \
-+              SPEX(_field[3], _offset +  6, _mask, _shift);   \
-+              SPEX(_field[4], _offset +  8, _mask, _shift);   \
-+              SPEX(_field[5], _offset + 10, _mask, _shift);   \
-+              SPEX(_field[6], _offset + 12, _mask, _shift);   \
-+              SPEX(_field[7], _offset + 14, _mask, _shift);   \
-+      } while (0)
-+
-+
-+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
-+                             u16 mask, u16 shift)
-+{
-+      u16 v;
-+      u8 gain;
-+
-+      v = in[SPOFF(SSB_SPROM1_AGAIN)];
-+      gain = (v & mask) >> shift;
-+      if (gain == 0xFF)
-+              gain = 2; /* If unset use 2dBm */
-+      if (sprom_revision == 1) {
-+              /* Convert to Q5.2 */
-+              gain <<= 2;
-+      } else {
-+              /* Q5.2 Fractional part is stored in 0xC0 */
-+              gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
-+      }
-+
-+      return (s8)gain;
-+}
-+
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+      SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+      SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+      SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+      SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+           SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
-+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 loc[3];
-+
-+      if (out->revision == 3)                 /* rev 3 moved MAC */
-+              loc[0] = SSB_SPROM3_IL0MAC;
-+      else {
-+              loc[0] = SSB_SPROM1_IL0MAC;
-+              loc[1] = SSB_SPROM1_ET0MAC;
-+              loc[2] = SSB_SPROM1_ET1MAC;
-+      }
-+
-+      SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-+           SSB_SPROM1_ETHPHY_ET1A_SHIFT);
-+      SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
-+      SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
-+      SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 1)
-+              SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
-+                   SSB_SPROM1_BINF_CCODE_SHIFT);
-+      SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
-+           SSB_SPROM1_BINF_ANTA_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-+           SSB_SPROM1_BINF_ANTBG_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
-+      SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
-+           SSB_SPROM1_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
-+           SSB_SPROM1_GPIOB_P3_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
-+           SSB_SPROM1_MAXPWR_A_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
-+      SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
-+           SSB_SPROM1_ITSSI_A_SHIFT);
-+      SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
-+      SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-+
-+      SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-+
-+      /* Extract the antenna gain values. */
-+      out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_BG,
-+                                                  SSB_SPROM1_AGAIN_BG_SHIFT);
-+      out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
-+                                                  SSB_SPROM1_AGAIN_A,
-+                                                  SSB_SPROM1_AGAIN_A_SHIFT);
-+      if (out->revision >= 2)
-+              sprom_extract_r23(out, in);
-+}
-+
-+/* Revs 4 5 and 8 have partially shared layout */
-+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
-+{
-+      SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
-+      SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
-+           SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
-+      SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
-+      SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
-+           SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
-+
-+      SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
-+      SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
-+           SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
-+      SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
-+      SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
-+           SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
-+
-+      SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
-+      SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
-+           SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
-+      SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
-+      SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
-+           SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
-+
-+      SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
-+      SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
-+           SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
-+      SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
-+      SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
-+           SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
-+{
-+      u16 il0mac_offset;
-+
-+      if (out->revision == 4)
-+              il0mac_offset = SSB_SPROM4_IL0MAC;
-+      else
-+              il0mac_offset = SSB_SPROM5_IL0MAC;
-+
-+      SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
-+      SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
-+           SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-+      SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      if (out->revision == 4) {
-+              SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
-+      } else {
-+              SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
-+              SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
-+              SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+              SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+              SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-+              SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
-+      }
-+      SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
-+           SSB_SPROM4_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-+           SSB_SPROM4_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
-+           SSB_SPROM4_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
-+           SSB_SPROM4_ITSSI_A_SHIFT);
-+      if (out->revision == 4) {
-+              SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+                   SSB_SPROM4_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+                   SSB_SPROM4_GPIOB_P3_SHIFT);
-+      } else {
-+              SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+              SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+                   SSB_SPROM5_GPIOA_P1_SHIFT);
-+              SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+              SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+                   SSB_SPROM5_GPIOB_P3_SHIFT);
-+      }
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
-+           SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
-+           SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
-+
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 4 stuff needed */
-+}
-+
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+      int i;
-+      u16 o;
-+      u16 pwr_info_offset[] = {
-+              SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
-+              SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
-+      };
-+      BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
-+                      ARRAY_SIZE(out->core_pwr_info));
-+
-+      SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
-+      SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
-+      SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
-+      SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
-+      SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+      SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+      SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+      SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+      SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+           SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+      SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+           SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+      SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+      SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+           SSB_SPROM8_ITSSI_BG_SHIFT);
-+      SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+      SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+           SSB_SPROM8_ITSSI_A_SHIFT);
-+      SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+      SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+           SSB_SPROM8_MAXP_AL_SHIFT);
-+      SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+      SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+           SSB_SPROM8_GPIOA_P1_SHIFT);
-+      SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+      SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+           SSB_SPROM8_GPIOB_P3_SHIFT);
-+      SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+      SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+           SSB_SPROM8_TRI5G_SHIFT);
-+      SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+      SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+           SSB_SPROM8_TRI5GH_SHIFT);
-+      SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+      SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+           SSB_SPROM8_RXPO5G_SHIFT);
-+      SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+      SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+           SSB_SPROM8_RSSISMC2G_SHIFT);
-+      SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+           SSB_SPROM8_RSSISAV2G_SHIFT);
-+      SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+           SSB_SPROM8_BXA2G_SHIFT);
-+      SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+      SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+           SSB_SPROM8_RSSISMC5G_SHIFT);
-+      SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+           SSB_SPROM8_RSSISAV5G_SHIFT);
-+      SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+           SSB_SPROM8_BXA5G_SHIFT);
-+      SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+      SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+      SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+      SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+      SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+      SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+      SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+      SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+      SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+      SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+      SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+      SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+      SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+      SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+      SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+      /* Extract the antenna gain values. */
-+      SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
-+      SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
-+           SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
-+      SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
-+      SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
-+           SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
-+
-+      /* Extract cores power info info */
-+      for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
-+              o = pwr_info_offset[i];
-+              SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
-+                      SSB_SPROM8_2G_MAXP, 0);
-+
-+              SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
-+
-+              SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
-+              SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
-+                      SSB_SPROM8_5G_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GH_MAXP, 0);
-+              SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
-+                      SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
-+
-+              SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
-+              SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
-+      }
-+
-+      /* Extract FEM info */
-+      SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
-+      SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
-+      SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
-+      SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
-+      SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
-+              SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-+
-+      SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
-+           SSB_SPROM8_LEDDC_ON_SHIFT);
-+      SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
-+           SSB_SPROM8_LEDDC_OFF_SHIFT);
-+
-+      SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
-+           SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
-+      SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
-+           SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
-+      SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
-+           SSB_SPROM8_TXRXC_SWITCH_SHIFT);
-+
-+      SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
-+
-+      SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
-+      SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
-+
-+      SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
-+           SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
-+      SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
-+           SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
-+      SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
-+           SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
-+      SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
-+      SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
-+           SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
-+      SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
-+           SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
-+      SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
-+           SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
-+      SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
-+           SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
-+
-+      SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
-+      SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
-+      SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
-+      SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
-+
-+      SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
-+           SSB_SPROM8_THERMAL_TRESH_SHIFT);
-+      SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
-+           SSB_SPROM8_THERMAL_OFFSET_SHIFT);
-+      SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL,
-+           SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
-+      SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
-+           SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
-+      SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS,
-+           SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
-+      sprom_extract_r458(out, in);
-+
-+      /* TODO - get remaining rev 8 stuff needed */
-+}
-+
-+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size)
-+{
-+      memset(out, 0, sizeof(*out));
-+
-+      out->revision = in[size - 1] & 0x00FF;
-+      memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
-+      memset(out->et1mac, 0xFF, 6);
-+
-+      switch (out->revision) {
-+      case 1:
-+      case 2:
-+      case 3:
-+              sprom_extract_r123(out, in);
-+              break;
-+      case 4:
-+      case 5:
-+              sprom_extract_r45(out, in);
-+              break;
-+      case 8:
-+              sprom_extract_r8(out, in);
-+              break;
-+      default:
-+              pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
-+                       out->revision);
-+              out->revision = 1;
-+              sprom_extract_r123(out, in);
-+      }
-+
-+      if (out->boardflags_lo == 0xFFFF)
-+              out->boardflags_lo = 0;  /* per specs */
-+      if (out->boardflags_hi == 0xFFFF)
-+              out->boardflags_hi = 0;  /* per specs */
-+
-+      return 0;
-+}
-+
-+static __initdata u16 template_sprom[220];
- #endif
-+
- int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data)
- {
-       int ret = 0;
- #ifdef CONFIG_SSB_PCIHOST
-+      u16 size = 0;
-+
-       switch (data->type) {
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
-+      if (size > 0)
-+              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
diff --git a/target/linux/brcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/brcm63xx/patches-4.19/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch
deleted file mode 100644 (file)
index 65c00b5..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:33:38 +0200
-Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common
- ssb cards
-
-Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 136 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   6 +
- 2 files changed, 142 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
-+
-+static __initconst u16 bcm4306_sprom[] = {
-+      0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4,
-+      0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4318_sprom[] = {
-+      0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7,
-+      0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff,
-+      0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002,
-+};
-+
-+static __initconst u16 bcm4321_sprom[] = {
-+      0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000,
-+      0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36,
-+      0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0004,
-+};
-+
-+static __initconst u16 bcm4322_sprom[] = {
-+      0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43222_sprom[] = {
-+      0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000,
-+      0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
- static struct ssb_sprom bcm63xx_sprom;
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr
-       u16 size = 0;
-       switch (data->type) {
-+      case SPROM_BCM4306:
-+              memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-+              size = ARRAY_SIZE(bcm4306_sprom);
-+              break;
-+      case SPROM_BCM4318:
-+              memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom));
-+              size = ARRAY_SIZE(bcm4318_sprom);
-+              break;
-+      case SPROM_BCM4321:
-+              memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom));
-+              size = ARRAY_SIZE(bcm4321_sprom);
-+              break;
-+      case SPROM_BCM4322:
-+              memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom));
-+              size = ARRAY_SIZE(bcm4322_sprom);
-+              break;
-+      case SPROM_BCM43222:
-+              memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-+              size = ARRAY_SIZE(bcm43222_sprom);
-+              break;
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -5,6 +5,12 @@
- enum sprom_type {
-       SPROM_DEFAULT, /* default fallback sprom */
-+      /* SSB based */
-+      SPROM_BCM4306,
-+      SPROM_BCM4318,
-+      SPROM_BCM4321,
-+      SPROM_BCM4322,
-+      SPROM_BCM43222,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/brcm63xx/patches-4.19/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch
deleted file mode 100644 (file)
index 11153c1..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 22:48:26 +0200
-Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma
-
-Similar to SSB, register a fallback sprom handler for BCMA.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig |  1 +
- arch/mips/bcm63xx/sprom.c        | 40 +++++++++++++++++++++++++++++++++++-----
- 2 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -5,6 +5,7 @@ menu "Board support"
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      select BCMA
-       default y
- endmenu
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/bcma/bcma.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <board_bcm963xx.h>
-@@ -21,7 +22,7 @@
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-  */
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
- static __initconst struct ssb_sprom bcm63xx_default_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6
-       .boardflags_hi          = 0x0000,
- };
--
-+#if defined (CONFIG_SSB_PCIHOST)
- static __initconst u16 bcm4306_sprom[] = {
-       0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002,
-       0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[]
-       0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-       0xffff, 0xffff, 0xffff, 0x0008,
- };
-+#endif /* CONFIG_SSB_PCIHOST */
- static struct ssb_sprom bcm63xx_sprom;
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+#if defined(CONFIG_SSB_PCIHOST)
-+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
-               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss
-               return -EINVAL;
-       }
- }
-+#endif
-+
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
- /* FIXME: use lib_sprom after submission upstream */
-@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr
- {
-       int ret = 0;
--#ifdef CONFIG_SSB_PCIHOST
-+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI)
-       u16 size = 0;
-       switch (data->type) {
-+#if defined(CONFIG_SSB_PCIHOST)
-       case SPROM_BCM4306:
-               memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom));
-               size = ARRAY_SIZE(bcm4306_sprom);
-@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr
-               memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom));
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
-@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
-+
-+#if defined(CONFIG_SSB_PCIHOST)
-+      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom);
-+      if (ret)
-+              return ret;
-+
-+#endif
--      ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom);
-+      if (ret)
-+              return ret;
- #endif
-       return ret;
- }
diff --git a/target/linux/brcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/brcm63xx/patches-4.19/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch
deleted file mode 100644 (file)
index 5c0abb9..0000000
+++ /dev/null
@@ -1,303 +0,0 @@
-From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 30 Jul 2014 23:14:27 +0200
-Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates
-
-Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227,
-BCM43228, and BCM4331.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 256 +++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |   8 +
- 2 files changed, 264 insertions(+)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[]
- };
- #endif /* CONFIG_SSB_PCIHOST */
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+static __initconst u16 bcm4313_sprom[] = {
-+      0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201,
-+      0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000,
-+      0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0008,
-+};
-+
-+static __initconst u16 bcm43131_sprom[] = {
-+      0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202,
-+      0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43217_sprom[] = {
-+      0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x7a08,
-+};
-+
-+static __initconst u16 bcm43225_sprom[] = {
-+      0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555,
-+      0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43227_sprom[] = {
-+      0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415,
-+      0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666,
-+      0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0008,
-+};
-+
-+static __initconst u16 bcm43228_sprom[] = {
-+      0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202,
-+      0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215,
-+      0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c,
-+      0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000,
-+      0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446,
-+      0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888,
-+      0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333,
-+      0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xf008,
-+};
-+
-+static __initconst u16 bcm4331_sprom[] = {
-+      0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4,
-+      0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820,
-+      0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100,
-+      0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202,
-+      0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325,
-+      0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657,
-+      0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000,
-+      0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d,
-+      0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000,
-+      0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4,
-+      0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-+      0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
-+      0xffff, 0xffff, 0xffff, 0x0009,
-+};
-+
-+#endif  /* CONFIG_BCMA_HOST_PCI */
-+
- static struct ssb_sprom bcm63xx_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
-@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr
-               size = ARRAY_SIZE(bcm43222_sprom);
-               break;
- #endif
-+#if defined(CONFIG_BCMA_HOST_PCI)
-+      case SPROM_BCM4313:
-+              memcpy(&template_sprom, &bcm4313_sprom,
-+                       sizeof(bcm4313_sprom));
-+              size = ARRAY_SIZE(bcm4313_sprom);
-+              break;
-+      case SPROM_BCM43131:
-+              memcpy(&template_sprom, &bcm43131_sprom,
-+                     sizeof(bcm43131_sprom));
-+              size = ARRAY_SIZE(bcm43131_sprom);
-+              break;
-+      case SPROM_BCM43217:
-+              memcpy(&template_sprom, &bcm43217_sprom,
-+                     sizeof(bcm43217_sprom));
-+              size = ARRAY_SIZE(bcm43217_sprom);
-+              break;
-+      case SPROM_BCM43225:
-+              memcpy(&template_sprom, &bcm43225_sprom,
-+                     sizeof(bcm43225_sprom));
-+              size = ARRAY_SIZE(bcm43225_sprom);
-+              break;
-+      case SPROM_BCM43227:
-+              memcpy(&template_sprom, &bcm43227_sprom,
-+                     sizeof(bcm43227_sprom));
-+              size = ARRAY_SIZE(bcm43227_sprom);
-+              break;
-+      case SPROM_BCM43228:
-+              memcpy(&template_sprom, &bcm43228_sprom,
-+                     sizeof(bcm43228_sprom));
-+              size = ARRAY_SIZE(bcm43228_sprom);
-+              break;
-+      case SPROM_BCM4331:
-+              memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom));
-+              size = ARRAY_SIZE(bcm4331_sprom);
-+              break;
-+#endif
-       case SPROM_DEFAULT:
-               memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
-                      sizeof(bcm63xx_sprom));
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -11,6 +11,14 @@ enum sprom_type {
-       SPROM_BCM4321,
-       SPROM_BCM4322,
-       SPROM_BCM43222,
-+      /* BCMA based */
-+      SPROM_BCM4313,
-+      SPROM_BCM43131,
-+      SPROM_BCM43217,
-+      SPROM_BCM43225,
-+      SPROM_BCM43227,
-+      SPROM_BCM43228,
-+      SPROM_BCM4331,
- };
- struct fallback_sprom_data {
diff --git a/target/linux/brcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/brcm63xx/patches-4.19/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch
deleted file mode 100644 (file)
index 74c2846..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 19:12:33 +0200
-Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom
- fixups
-
-Allow board_info files to supply fixups for the base sproms to adapt
-them to the actual used sprom contents in case they do not use the
-default ones.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                                  | 14 +++++++++++++-
- .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h |  8 ++++++++
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro
-       return 0;
- }
-+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
-+{
-+      unsigned int i;
-+
-+      for (i = 0; i < n; i++)
-+              sprom[fixups[i].offset] = fixups[i].value;
-+}
-+
- static __initdata u16 template_sprom[220];
- #endif
-@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr
-               return -EINVAL;
-       }
--      if (size > 0)
-+      if (size > 0) {
-+              sprom_apply_fixups(template_sprom, data->board_fixups,
-+                                 data->num_board_fixups);
-+
-               sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+      }
-       memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
-       memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -21,9 +21,17 @@ enum sprom_type {
-       SPROM_BCM4331,
- };
-+struct sprom_fixup {
-+      u16 offset;
-+      u16 value;
-+};
-+
- struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+
-+      struct sprom_fixup *board_fixups;
-+      unsigned int num_board_fixups;
- };
- int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data);
diff --git a/target/linux/brcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/brcm63xx/patches-4.19/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch
deleted file mode 100644 (file)
index 40591e5..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
-From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 31 Jul 2014 20:39:44 +0200
-Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for
- fallback sprom
-
-Warn if the set pci bus/slot does not match the actual request.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/sprom.c                          | 31 ++++++++++++++++++----
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  3 +++
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] =
- #endif  /* CONFIG_BCMA_HOST_PCI */
--static struct ssb_sprom bcm63xx_sprom;
-+struct fallback_sprom_match {
-+      u8 pci_bus;
-+      u8 pci_dev;
-+      struct ssb_sprom sprom;
-+};
-+
-+static struct fallback_sprom_match fallback_sprom;
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc
- int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out)
- {
-       if (bus->hosttype == BCMA_HOSTTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              if (bus->host_pci->bus->number != fallback_sprom.pci_bus ||
-+                  PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev)
-+                      pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                              fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                              bus->host_pci->bus->number,
-+                              PCI_SLOT(bus->host_pci->devfn));
-+              memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-               return 0;
-       } else {
-               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr
-               break;
- #endif
-       case SPROM_DEFAULT:
--              memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom,
--                     sizeof(bcm63xx_sprom));
-+              memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom,
-+                     sizeof(bcm63xx_default_sprom));
-               break;
-       default:
-               return -EINVAL;
-@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr
-               sprom_apply_fixups(template_sprom, data->board_fixups,
-                                  data->num_board_fixups);
--              sprom_extract(&bcm63xx_sprom, template_sprom, size);
-+              sprom_extract(&fallback_sprom.sprom, template_sprom, size);
-       }
--      memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN);
--      memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN);
-+      memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN);
-+
-+      fallback_sprom.pci_bus = data->pci_bus;
-+      fallback_sprom.pci_dev = data->pci_dev;
- #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */
- #if defined(CONFIG_SSB_PCIHOST)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-@@ -30,6 +30,9 @@ struct fallback_sprom_data {
-       u8 mac_addr[ETH_ALEN];
-       enum sprom_type type;
-+      u8 pci_bus;
-+      u8 pci_dev;
-+
-       struct sprom_fixup *board_fixups;
-       unsigned int num_board_fixups;
- };
diff --git a/target/linux/brcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/brcm63xx/patches-4.19/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch
deleted file mode 100644 (file)
index a491816..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:57:51 +0200
-Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
- arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/prom.c                |    6 ++++++
- 3 files changed, 44 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -2,6 +2,10 @@
- menu "Board support"
-       depends on BCM63XX
-+config BOARD_BCM63XX_DT
-+      bool "Device Tree boards (experimential)"
-+      select USE_OF
-+
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -10,11 +10,14 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/of_fdt.h>
-+#include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <asm/bootinfo.h>
- #include <asm/fw/cfe/cfe_api.h>
-+#include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -125,8 +128,23 @@ void __init board_setup(void)
-       /* make sure we're running on expected cpu */
-       if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-               panic("unexpected CPU for bcm963xx board");
-+
-+#if CONFIG_OF
-+      if (initial_boot_params)
-+              __dt_setup_arch(initial_boot_params);
-+#endif
- }
-+#if CONFIG_OF
-+void __init device_tree_init(void)
-+{
-+      if (!initial_boot_params)
-+              return;
-+
-+      unflatten_and_copy_device_tree();
-+}
-+#endif
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+#if CONFIG_OF
-+static struct of_device_id of_ids[] = {
-+      { /* filled at runtime */ },
-+      { .compatible = "simple-bus" },
-+      { },
-+};
-+#endif
- /*
-  * third stage init callback, register all board devices.
-  */
-@@ -142,6 +167,15 @@ int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+#if CONFIG_OF
-+      if (of_have_populated_dt()) {
-+              snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible),
-+                       "brcm,bcm%x", bcm63xx_get_cpu_id());
-+
-+              of_platform_populate(NULL, of_ids, NULL, NULL);
-+      }
-+#endif
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -8,6 +8,7 @@
- #include <linux/init.h>
- #include <linux/bootmem.h>
-+#include <linux/of_fdt.h>
- #include <linux/smp.h>
- #include <asm/bootinfo.h>
- #include <asm/bmips.h>
-@@ -23,6 +24,11 @@ void __init prom_init(void)
- {
-       u32 reg, mask;
-+#if CONFIG_OF
-+      if (fw_passed_dtb)
-+              early_init_dt_verify((void *)fw_passed_dtb);
-+#endif
-+
-       bcm63xx_cpu_init();
-       /* stop any running watchdog */
diff --git a/target/linux/brcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/brcm63xx/patches-4.19/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch
deleted file mode 100644 (file)
index 7069c23..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 26 Jun 2014 12:51:00 +0200
-Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info
- by dtb
-
-Allow using the passed dtb's compatible property to match board_info
-structs instead of nvram's boardname field, which is not unique anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   15 +++++++++++++++
- arch/mips/bcm63xx/boards/board_common.c   |   18 ++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |    3 +++
- 3 files changed, 36 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -695,6 +695,10 @@ static const struct board_info __initcon
- #endif
- };
-+static struct of_device_id const bcm963xx_boards_dt[] = {
-+      { },
-+};
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void)
-       char *board_name = NULL;
-       u32 val;
-       struct bcm_hcs *hcs;
-+      const struct of_device_id *board_match;
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void)
-       } else {
-               board_name = bcm63xx_nvram_get_name();
-       }
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(bcm963xx_boards_dt);
-+      if (board_match) {
-+              board_early_setup(board_match->data,
-+                                bcm63xx_nvram_get_mac_address);
-+
-+              return;
-+      }
-+
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -239,3 +239,21 @@ int __init board_register_devices(void)
-       return 0;
- }
-+
-+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m)
-+{
-+      const struct of_device_id *match;
-+      unsigned long dt_root;
-+
-+      if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params)
-+              return NULL;
-+
-+      dt_root = of_get_flat_dt_root();
-+
-+      for (match = m; match->compatible[0]; match++) {
-+              if (of_flat_dt_is_compatible(dt_root, match->compatible))
-+                      return match;
-+      }
-+
-+      return NULL;
-+}
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -1,11 +1,14 @@
- #ifndef __BOARD_COMMON_H
- #define __BOARD_COMMON_H
-+#include <linux/of.h>
- #include <board_bcm963xx.h>
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *);
-+
- #if defined(CONFIG_BOARD_BCM963XX)
- void board_bcm963xx_init(void);
- #else
diff --git a/target/linux/brcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/brcm63xx/patches-4.19/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch
deleted file mode 100644 (file)
index 5dd4cba..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 21 Nov 2014 16:54:06 +0100
-Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info
- list
-
-Populate the compatible to board_info list to allow dtbs to be used
-for known boards.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -696,6 +696,48 @@ static const struct board_info __initcon
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-+#ifdef CONFIG_OF
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+      { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+      { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-+      { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+      { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-+      { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-+      { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-+      { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-+      { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-+      { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-+      { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+      { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-+      { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-+      { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-+      { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+#endif
-+#endif /* CONFIG_OF */
-       { },
- };
diff --git a/target/linux/brcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch b/target/linux/brcm63xx/patches-4.19/371_add_of_node_available_by_alias.patch
deleted file mode 100644 (file)
index 026eff3..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -143,6 +143,18 @@ void __init device_tree_init(void)
-       unflatten_and_copy_device_tree();
- }
-+
-+int board_of_device_present(const char *alias)
-+{
-+      bool present;
-+      struct device_node *np;
-+
-+      np = of_find_node_by_path(alias);
-+      present = of_device_is_available(np);
-+      of_node_put(np);
-+
-+      return present;
-+}
- #endif
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -15,4 +15,13 @@ void board_bcm963xx_init(void);
- static inline void board_bcm963xx_init(void) { }
- #endif
-+#if defined(CONFIG_OF)
-+int board_of_device_present(const char *alias);
-+#else
-+static inline void board_of_device_present(const char *alias)
-+{
-+      return 0;
-+}
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/brcm63xx/patches-4.19/372_dont_register_pflash_when_available_in_dtb.patch
deleted file mode 100644 (file)
index 25384eb..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -23,6 +23,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+#include "boards/board_common.h"
-+
- static int flash_type;
- static struct mtd_partition mtd_partitions[] = {
-@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-+              /* don't register when already registered through from dtb */
-+              if (board_of_device_present("pflash"))
-+                      return 0;
-               if (!mtd_resources[0].start) {
-                       /* read base address of boot chip select (0) */
diff --git a/target/linux/brcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/brcm63xx/patches-4.19/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch
deleted file mode 100644 (file)
index c5041a9..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Dec 2014 00:20:07 +0100
-Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -14,6 +14,8 @@
- #include <linux/irqchip.h>
- #include <linux/irqchip/irq-bcm6345-ext.h>
- #include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/of.h>
-+#include <linux/of_fdt.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -21,6 +23,9 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
-+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
-+           mips_cpu_irq_of_init);
-+
- void __init arch_init_irq(void)
- {
-       void __iomem *periph_bases[2];
-@@ -29,6 +34,13 @@ void __init arch_init_irq(void)
-       int periph_irqs[2] = { 2, 3 };
-       int ext_irqs[6];
-+#ifdef CONFIG_OF
-+      if (initial_boot_params) {
-+              irqchip_init();
-+              return;
-+      }
-+#endif
-+
-       periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
diff --git a/target/linux/brcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-4.19/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch
deleted file mode 100644 (file)
index 6307d56..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 19:55:32 +0100
-Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/gpio/Kconfig        |    8 +++
- drivers/gpio/Makefile       |    1 +
- drivers/gpio/gpio-bcm63xx.c |  135 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 131 insertions(+)
- create mode 100644 drivers/gpio/gpio-bcm63xx.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -151,6 +151,13 @@ config GPIO_BCM_KONA
-       help
-         Turn on GPIO support for Broadcom "Kona" chips.
-+config GPIO_BCM63XX
-+      bool "Broadcom BCM63XX GPIO"
-+      depends on MIPS || COMPILE_TEST
-+      select GPIO_GENERIC
-+      help
-+        Turn on GPIO support for Broadcom BCM63XX xDSL chips.
-+
- config GPIO_BRCMSTB
-       tristate "BRCMSTB GPIO support"
-       default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79)     += gpio-ath79.o
- obj-$(CONFIG_GPIO_ASPEED)     += gpio-aspeed.o
- obj-$(CONFIG_GPIO_RASPBERRYPI_EXP)    += gpio-raspberrypi-exp.o
- obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
-+obj-$(CONFIG_GPIO_BCM63XX)    += gpio-bcm63xx.o
- obj-$(CONFIG_GPIO_BD9571MWV)  += gpio-bd9571mwv.o
- obj-$(CONFIG_GPIO_BRCMSTB)    += gpio-brcmstb.o
- obj-$(CONFIG_GPIO_BT8XX)      += gpio-bt8xx.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm63xx.c
-@@ -0,0 +1,135 @@
-+/*
-+ * Driver for BCM63XX memory-mapped GPIO controllers, based on
-+ * Generic driver for memory-mapped GPIO controllers.
-+ *
-+ * Copyright 2008 MontaVista Software, Inc.
-+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
-+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
-+#include <linux/compiler.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/log2.h>
-+#include <linux/ioport.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_gpio.h>
-+
-+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      char irq_name[7]; /* "gpioXX" */
-+
-+      sprintf(irq_name, "gpio%d", gpio);
-+      return of_irq_get_byname(chip->of_node, irq_name);
-+}
-+
-+static int bcm63xx_gpio_probe(struct platform_device *pdev)
-+{
-+      struct device *dev = &pdev->dev;
-+      struct resource *dat_r, *dirout_r;
-+      void __iomem *dat;
-+      void __iomem *dirout;
-+      unsigned long sz;
-+      int err;
-+      struct gpio_chip *gc;
-+      struct bgpio_pdata *pdata = dev_get_platdata(dev);
-+
-+      dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+      if (!dat_r || !dirout_r)
-+              return -EINVAL;
-+
-+      if (resource_size(dat_r) != resource_size(dirout_r))
-+              return -EINVAL;
-+
-+      sz = resource_size(dat_r);
-+
-+      dat = devm_ioremap_resource(dev, dat_r);
-+      if (IS_ERR(dat))
-+              return PTR_ERR(dat);
-+
-+      dirout = devm_ioremap_resource(dev, dirout_r);
-+      if (IS_ERR(dirout))
-+              return PTR_ERR(dirout);
-+
-+      gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-+      if (!gc)
-+              return -ENOMEM;
-+
-+      err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL,
-+                       BGPIOF_BIG_ENDIAN_BYTE_ORDER);
-+      if (err)
-+              return err;
-+
-+      platform_set_drvdata(pdev, gc);
-+
-+      if (dev->of_node) {
-+              int id = of_alias_get_id(dev->of_node, "gpio");
-+              u32 ngpios;
-+
-+              if (id >= 0)
-+                      gc->label = devm_kasprintf(dev, GFP_KERNEL,
-+                                                 "bcm63xx-gpio.%d", id);
-+
-+              if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios))
-+                      gc->ngpio = ngpios;
-+
-+              if (of_get_property(dev->of_node, "interrupt-names", NULL))
-+                      gc->to_irq = bcm63xx_gpio_to_irq;
-+
-+      } else if (pdata) {
-+              gc->base = pdata->base;
-+              if (pdata->ngpio > 0)
-+                      gc->ngpio = pdata->ngpio;
-+      }
-+
-+      return gpiochip_add(gc);
-+}
-+
-+static int bcm63xx_gpio_remove(struct platform_device *pdev)
-+{
-+      struct gpio_chip *gc = platform_get_drvdata(pdev);
-+
-+      gpiochip_remove(gc);
-+      return 0;
-+}
-+
-+#ifdef CONFIG_OF
-+static struct of_device_id bcm63xx_gpio_of_match[] = {
-+      { .compatible = "brcm,bcm6345-gpio" },
-+      { },
-+};
-+#endif
-+
-+static struct platform_driver bcm63xx_gpio_driver = {
-+      .probe = bcm63xx_gpio_probe,
-+      .remove = bcm63xx_gpio_remove,
-+      .driver = {
-+              .name = "bcm63xx-gpio",
-+              .of_match_table = of_match_ptr(bcm63xx_gpio_of_match),
-+      },
-+};
-+
-+module_platform_driver(bcm63xx_gpio_driver);
-+
-+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers");
-+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/brcm63xx/patches-4.19/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch
deleted file mode 100644 (file)
index fe56da0..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 20 Feb 2015 23:58:54 +0100
-Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_common.c |    2 +
- arch/mips/bcm63xx/gpio.c  | 145 ++++++++++------------------------------------
- arch/mips/bcm63xx/setup.c |   3 -
- 3 files changed, 32 insertions(+), 118 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -188,6 +188,8 @@ int __init board_register_devices(void)
-       }
- #endif
-+      bcm63xx_gpio_init();
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -5,147 +5,62 @@
-  *
-  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
- #include <linux/kernel.h>
- #include <linux/init.h>
--#include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
--#include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
--static u32 gpio_out_low_reg;
--
--static void bcm63xx_gpio_out_low_reg_init(void)
-+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6345_CPU_ID:
--              gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
--              break;
--      default:
--              gpio_out_low_reg = GPIO_DATA_LO_REG;
--              break;
--      }
--}
--
--static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
--static u32 gpio_out_low, gpio_out_high;
-+      struct resource res[2];
-+      struct bgpio_pdata pdata;
--static void bcm63xx_gpio_set(struct gpio_chip *chip,
--                           unsigned gpio, int val)
--{
--      u32 reg;
--      u32 mask;
--      u32 *v;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--              v = &gpio_out_low;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--              v = &gpio_out_high;
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      if (val)
--              *v |= mask;
--      else
--              *v &= ~mask;
--      bcm_gpio_writel(*v, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
--}
-+      memset(res, 0, sizeof(res));
-+      memset(&pdata, 0, sizeof(pdata));
--static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
--{
--      u32 reg;
--      u32 mask;
-+      res[0].flags = IORESOURCE_MEM;
-+      res[0].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[0].start += dir;
--      if (gpio >= chip->ngpio)
--              BUG();
-+      res[0].end = res[0].start + 3;
--      if (gpio < 32) {
--              reg = gpio_out_low_reg;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_DATA_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
-+      res[1].flags = IORESOURCE_MEM;
-+      res[1].start = bcm63xx_regset_address(RSET_GPIO);
-+      res[1].start += data;
--      return !!(bcm_gpio_readl(reg) & mask);
--}
-+      res[1].end = res[1].start + 3;
--static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
--                                    unsigned gpio, int dir)
--{
--      u32 reg;
--      u32 mask;
--      u32 tmp;
--      unsigned long flags;
--
--      if (gpio >= chip->ngpio)
--              BUG();
--
--      if (gpio < 32) {
--              reg = GPIO_CTL_LO_REG;
--              mask = 1 << gpio;
--      } else {
--              reg = GPIO_CTL_HI_REG;
--              mask = 1 << (gpio - 32);
--      }
--
--      spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
--      tmp = bcm_gpio_readl(reg);
--      if (dir == BCM63XX_GPIO_DIR_IN)
--              tmp &= ~mask;
--      else
--              tmp |= mask;
--      bcm_gpio_writel(tmp, reg);
--      spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
-+      pdata.base = id * 32;
-+      pdata.ngpio = ngpio;
--      return 0;
-+      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
-+                                        &pdata, sizeof(pdata));
- }
--static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-+int __init bcm63xx_gpio_init(void)
- {
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
--}
-+      int ngpio = bcm63xx_gpio_count();
-+      int data_low_reg;
--static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
--                                       unsigned gpio, int value)
--{
--      bcm63xx_gpio_set(chip, gpio, value);
--      return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
--}
-+      if (BCMCPU_IS_6345())
-+              data_low_reg = GPIO_DATA_LO_REG_6345;
-+      else
-+              data_low_reg = GPIO_DATA_LO_REG;
-+      bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32));
--static struct gpio_chip bcm63xx_gpio_chip = {
--      .label                  = "bcm63xx-gpio",
--      .direction_input        = bcm63xx_gpio_direction_input,
--      .direction_output       = bcm63xx_gpio_direction_output,
--      .get                    = bcm63xx_gpio_get,
--      .set                    = bcm63xx_gpio_set,
--      .base                   = 0,
--};
-+      if (ngpio <= 32)
-+              return 0;
--int __init bcm63xx_gpio_init(void)
--{
--      bcm63xx_gpio_out_low_reg_init();
-+      bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32);
--      gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
--      if (!BCMCPU_IS_6345())
--              gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
--      bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
--      pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
-+      return 0;
--      return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
- }
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -164,9 +164,6 @@ void __init plat_mem_setup(void)
- int __init bcm63xx_register_devices(void)
- {
--      /* register gpiochip */
--      bcm63xx_gpio_init();
--
-       return board_register_devices();
- }
diff --git a/target/linux/brcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-4.19/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
deleted file mode 100644 (file)
index c061ec4..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:21:59 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio
-
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +-
- arch/mips/bcm63xx/boards/board_common.c            |    7 +++--
- arch/mips/bcm63xx/gpio.c                           |   32 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |    2 ++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    5 +--
- 5 files changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -55,7 +55,7 @@ static struct board_info __initdata boar
-       },
-       .ephy_reset_gpio                = 36,
--      .ephy_reset_gpio_flags          = GPIOF_INIT_HIGH,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -247,9 +247,10 @@ int __init board_register_devices(void)
-       platform_device_register(&bcm63xx_gpio_leds);
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) {
-+              bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio,
-+                                      board.ephy_reset_gpio_flags);
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -8,15 +8,23 @@
-  * Copyright (C) Jonas Gorski <jogo@openwrt.org>
-  */
-+#include <asm/addrspace.h>
-+
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio/driver.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+static const char * const gpio_chip_labels[] = {
-+      "bcm63xx-gpio.0",
-+      "bcm63xx-gpio.1",
-+};
-+
- static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio)
- {
-       struct resource res[2];
-@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void)
-       return 0;
- }
-+
-+static struct gpiod_lookup_table ephy_reset = {
-+      .dev_id = "bcm63xx_enet-0",
-+      .table = {
-+              { /* filled at runtime */ },
-+              { },
-+      },
-+};
-+
-+
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags)
-+{
-+      if (ephy_reset.table[0].chip_label)
-+              return;
-+
-+      ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32];
-+      ephy_reset.table[0].chip_hwnum = hw_gpio % 32;
-+      ephy_reset.table[0].con_id = "reset";
-+      ephy_reset.table[0].flags = flags;
-+
-+      gpiod_add_lookup_table(&ephy_reset);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -3,9 +3,11 @@
- #define BCM63XX_GPIO_H
- #include <linux/init.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cpu.h>
- int __init bcm63xx_gpio_init(void);
-+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio/machine.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -50,8 +51,8 @@ struct board_info {
-       /* External PHY reset GPIO */
-       unsigned int ephy_reset_gpio;
--      /* External PHY reset GPIO flags from gpio.h */
--      unsigned long ephy_reset_gpio_flags;
-+      /* External PHY reset GPIO flags from gpio/machine.h */
-+      enum gpio_lookup_flags ephy_reset_gpio_flags;
-       /* fallback sprom config */
-       struct fallback_sprom_data fallback_sprom;
diff --git a/target/linux/brcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/brcm63xx/patches-4.19/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch
deleted file mode 100644 (file)
index 6eb1bd0..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 17:26:50 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if
-present in dtb
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/gpio.c |   7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -20,6 +20,8 @@
- #include <bcm63xx_gpio.h>
- #include <bcm63xx_regs.h>
-+#include "boards/board_common.h"
-+
- static const char * const gpio_chip_labels[] = {
-       "bcm63xx-gpio.0",
-       "bcm63xx-gpio.1",
-@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one
-       pdata.base = id * 32;
-       pdata.ngpio = ngpio;
--      platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2,
--                                        &pdata, sizeof(pdata));
-+      if (!board_of_device_present("gpio0") &&
-+          !board_of_device_present("pinctrl"))
-+              platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res,
-+                                                2, &pdata, sizeof(pdata));
- }
- int __init bcm63xx_gpio_init(void)
diff --git a/target/linux/brcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/brcm63xx/patches-4.19/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch
deleted file mode 100644 (file)
index b571999..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:52:02 +0100
-Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia
- ready gpio
-
-To prepare for a time when gpiobases don't need to be fixed anymore.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-pcmcia.c |   13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-pcmcia.c
-+++ b/arch/mips/bcm63xx/dev-pcmcia.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <asm/bootinfo.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio/machine.h>
- #include <bcm63xx_cs.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -101,6 +102,14 @@ static const struct {
-       },
- };
-+static struct gpiod_lookup_table pcmcia_gpios_table = {
-+      .dev_id = "bcm63xx_pcmcia.0",
-+      .table = {
-+              GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH),
-+              { },
-+      },
-+};
-+
- int __init bcm63xx_pcmcia_register(void)
- {
-       int ret, i;
-@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void)
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6348_CPU_ID:
-               pd.ready_gpio = 22;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 22;
-               break;
-       case BCM6358_CPU_ID:
-               pd.ready_gpio = 18;
-+              pcmcia_gpios_table.table[0].chip_hwnum = 18;
-               break;
-       default:
-               return -ENODEV;
-       }
-+      gpiod_add_lookup_table(&pcmcia_gpios_table);
-+
-       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
-       pcmcia_resources[0].end = pcmcia_resources[0].start +
-               RSET_PCMCIA_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/brcm63xx/patches-4.19/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch
deleted file mode 100644 (file)
index 2534171..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 25 Mar 2015 13:54:56 +0100
-Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio
-
-Use the new named gpio instead of relying on the hardware gpio numbers
-matching the virtual gpio numbers.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/pcmcia/bcm63xx_pcmcia.c |    9 ++++++++-
- drivers/pcmcia/bcm63xx_pcmcia.h |    4 ++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/pcmcia/bcm63xx_pcmcia.c
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
-@@ -237,7 +237,7 @@ static unsigned int __get_socket_status(
-               stat |= SS_XVCARD;
-       stat |= SS_POWERON;
--      if (gpio_get_value(skt->pd->ready_gpio))
-+      if (gpiod_get_value(skt->ready_gpio))
-               stat |= SS_READY;
-       return stat;
-@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru
-               goto err;
-       }
-+      /* get ready gpio */
-+      skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN);
-+      if (IS_ERR(skt->ready_gpio)) {
-+              ret = PTR_ERR(skt->ready_gpio);
-+              goto err;
-+      }
-+
-       /* resources are static */
-       sock->resource_ops = &pccard_static_ops;
-       sock->ops = &bcm63xx_pcmcia_operations;
---- a/drivers/pcmcia/bcm63xx_pcmcia.h
-+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
-@@ -4,6 +4,7 @@
- #include <linux/types.h>
- #include <linux/timer.h>
-+#include <linux/gpio/consumer.h>
- #include <pcmcia/ss.h>
- #include <bcm63xx_dev_pcmcia.h>
-@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket {
-       /* base address of io memory */
-       void __iomem *io_base;
-+
-+      /* ready gpio */
-+      struct gpio_desc *ready_gpio;
- };
- #endif /* BCM63XX_PCMCIA_H_ */
diff --git a/target/linux/brcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/brcm63xx/patches-4.19/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch
deleted file mode 100644 (file)
index 5d4265f..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 27 Jul 2016 11:38:05 +0200
-Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding
- documentation
-
-Add binding documentation for the pincontrol core found in BCM6318 SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt      | 79 ++++++++++++++++++++++
- 1 file changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt
-@@ -0,0 +1,79 @@
-+* Broadcom BCM6318 pin controller
-+
-+Required properties:
-+- compatible: Must be "brcm,bcm6318-pinctrl".
-+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers.
-+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad".
-+- gpio-controller: Identifies this node as a gpio controller.
-+- #gpio-cells: Must be <2>.
-+
-+Example:
-+
-+pinctrl: pin-controller@10000080 {
-+      compatible = "brcm,bcm6318-pinctrl";
-+      reg = <0x10000080 0x08>,
-+            <0x10000088 0x08>,
-+            <0x10000098 0x04>,
-+            <0x1000009c 0x0c>,
-+            <0x100000d4 0x18>;
-+      reg-names = "dirout", "dat", "mode", "mux", "pad";
-+
-+      gpio-controller;
-+      #gpio-cells = <2>;
-+};
-+
-+
-+Available pins/groups and functions:
-+
-+name          pins    functions
-+-----------------------------------------------------------
-+gpio0         0       led, ephy0_spd_led
-+gpio1         1       led, ephy1_spd_led
-+gpio2         2       led, ephy2_spd_led
-+gpio3         3       led, ephy3_spd_led
-+gpio4         4       led, ephy0_act_led
-+gpio5         5       led, ephy1_act_led
-+gpio6         6       led, ephy2_act_led, serial_led_data
-+gpio7         7       led, ephy3_act_led, serial_led_clk
-+gpio8         8       led, inet_act_led
-+gpio9         9       led, inet_fail_led
-+gpio10                10      led, dsl_led
-+gpio11                11      led, post_fail_led
-+gpio12                12      led, wlan_wps_led
-+gpio13                13      led, usb_pwron, usb_device_led
-+gpio14                14      led
-+gpio15                15      led
-+gpio16                16      led
-+gpio17                17      led
-+gpio18                18      led
-+gpio19                19      led
-+gpio20                20      led
-+gpio21                21      led
-+gpio22                22      led
-+gpio23                23      led
-+gpio24                24      -
-+gpio25                25      -
-+gpio26                26      -
-+gpio27                27      -
-+gpio28                28      -
-+gpio29                29      -
-+gpio30                30      -
-+gpio31                31      -
-+gpio32                32      -
-+gpio33                33      -
-+gpio34                34      -
-+gpio35                35      -
-+gpio36                36      -
-+gpio37                37      -
-+gpio38                38      -
-+gpio39                39      -
-+gpio40                40      usb_active
-+gpio41                41      -
-+gpio42                42      -
-+gpio43                43      -
-+gpio44                44      -
-+gpio45                45      -
-+gpio46                46      -
-+gpio47                47      -
-+gpio48                48      -
-+gpio49                49      -
diff --git a/target/linux/brcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.19/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch
deleted file mode 100644 (file)
index 2a89dde..0000000
+++ /dev/null
@@ -1,609 +0,0 @@
-From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 24 Jun 2016 22:20:39 +0200
-Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318
-
-Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs
-to different functions. BCM6318 is similar to BCM6328 with the addition
-of a pad register, and the GPIO meaning of the mux register changes
-based on the GPIO number.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/pinctrl/bcm63xx/Kconfig           |   7 +
- drivers/pinctrl/bcm63xx/Makefile          |   1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++
- 3 files changed, 572 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-
---- a/drivers/pinctrl/bcm63xx/Kconfig
-+++ b/drivers/pinctrl/bcm63xx/Kconfig
-@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX
-       bool
-       select GPIO_GENERIC
-+config PINCTRL_BCM6318
-+      bool "BCM6318 pincontrol driver" if COMPILE_TEST
-+      select PINMUX
-+      select PINCONF
-+      select PINCTRL_BCM63XX
-+      select GENERIC_PINCONF
-+
- config PINCTRL_BCM6328
-       bool "BCM6328 pincontrol driver" if COMPILE_TEST
-       select PINMUX
---- a/drivers/pinctrl/bcm63xx/Makefile
-+++ b/drivers/pinctrl/bcm63xx/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
-+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c
-@@ -0,0 +1,564 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/spinlock.h>
-+#include <linux/bitops.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include "../core.h"
-+#include "../pinctrl-utils.h"
-+
-+#include "pinctrl-bcm63xx.h"
-+
-+#define BCM6318_NGPIO         50
-+
-+struct bcm6318_pingroup {
-+      const char *name;
-+      const unsigned * const pins;
-+      const unsigned num_pins;
-+};
-+
-+struct bcm6318_function {
-+      const char *name;
-+      const char * const *groups;
-+      const unsigned num_groups;
-+
-+      unsigned mode_val:1;
-+      unsigned mux_val:2;
-+};
-+
-+struct bcm6318_pinctrl {
-+      struct pinctrl_dev *pctldev;
-+      struct pinctrl_desc desc;
-+
-+      void __iomem *mode;
-+      void __iomem *mux[3];
-+      void __iomem *pad[6];
-+
-+      /* register access lock */
-+      spinlock_t lock;
-+
-+      struct gpio_chip gpio[2];
-+};
-+
-+static const struct pinctrl_pin_desc bcm6318_pins[] = {
-+      PINCTRL_PIN(0, "gpio0"),
-+      PINCTRL_PIN(1, "gpio1"),
-+      PINCTRL_PIN(2, "gpio2"),
-+      PINCTRL_PIN(3, "gpio3"),
-+      PINCTRL_PIN(4, "gpio4"),
-+      PINCTRL_PIN(5, "gpio5"),
-+      PINCTRL_PIN(6, "gpio6"),
-+      PINCTRL_PIN(7, "gpio7"),
-+      PINCTRL_PIN(8, "gpio8"),
-+      PINCTRL_PIN(9, "gpio9"),
-+      PINCTRL_PIN(10, "gpio10"),
-+      PINCTRL_PIN(11, "gpio11"),
-+      PINCTRL_PIN(12, "gpio12"),
-+      PINCTRL_PIN(13, "gpio13"),
-+      PINCTRL_PIN(14, "gpio14"),
-+      PINCTRL_PIN(15, "gpio15"),
-+      PINCTRL_PIN(16, "gpio16"),
-+      PINCTRL_PIN(17, "gpio17"),
-+      PINCTRL_PIN(18, "gpio18"),
-+      PINCTRL_PIN(19, "gpio19"),
-+      PINCTRL_PIN(20, "gpio20"),
-+      PINCTRL_PIN(21, "gpio21"),
-+      PINCTRL_PIN(22, "gpio22"),
-+      PINCTRL_PIN(23, "gpio23"),
-+      PINCTRL_PIN(24, "gpio24"),
-+      PINCTRL_PIN(25, "gpio25"),
-+      PINCTRL_PIN(26, "gpio26"),
-+      PINCTRL_PIN(27, "gpio27"),
-+      PINCTRL_PIN(28, "gpio28"),
-+      PINCTRL_PIN(29, "gpio29"),
-+      PINCTRL_PIN(30, "gpio30"),
-+      PINCTRL_PIN(31, "gpio31"),
-+      PINCTRL_PIN(32, "gpio32"),
-+      PINCTRL_PIN(33, "gpio33"),
-+      PINCTRL_PIN(34, "gpio34"),
-+      PINCTRL_PIN(35, "gpio35"),
-+      PINCTRL_PIN(36, "gpio36"),
-+      PINCTRL_PIN(37, "gpio37"),
-+      PINCTRL_PIN(38, "gpio38"),
-+      PINCTRL_PIN(39, "gpio39"),
-+      PINCTRL_PIN(40, "gpio40"),
-+      PINCTRL_PIN(41, "gpio41"),
-+      PINCTRL_PIN(42, "gpio42"),
-+      PINCTRL_PIN(43, "gpio43"),
-+      PINCTRL_PIN(44, "gpio44"),
-+      PINCTRL_PIN(45, "gpio45"),
-+      PINCTRL_PIN(46, "gpio46"),
-+      PINCTRL_PIN(47, "gpio47"),
-+      PINCTRL_PIN(48, "gpio48"),
-+      PINCTRL_PIN(49, "gpio49"),
-+};
-+
-+static unsigned gpio0_pins[] = { 0 };
-+static unsigned gpio1_pins[] = { 1 };
-+static unsigned gpio2_pins[] = { 2 };
-+static unsigned gpio3_pins[] = { 3 };
-+static unsigned gpio4_pins[] = { 4 };
-+static unsigned gpio5_pins[] = { 5 };
-+static unsigned gpio6_pins[] = { 6 };
-+static unsigned gpio7_pins[] = { 7 };
-+static unsigned gpio8_pins[] = { 8 };
-+static unsigned gpio9_pins[] = { 9 };
-+static unsigned gpio10_pins[] = { 10 };
-+static unsigned gpio11_pins[] = { 11 };
-+static unsigned gpio12_pins[] = { 12 };
-+static unsigned gpio13_pins[] = { 13 };
-+static unsigned gpio14_pins[] = { 14 };
-+static unsigned gpio15_pins[] = { 15 };
-+static unsigned gpio16_pins[] = { 16 };
-+static unsigned gpio17_pins[] = { 17 };
-+static unsigned gpio18_pins[] = { 18 };
-+static unsigned gpio19_pins[] = { 19 };
-+static unsigned gpio20_pins[] = { 20 };
-+static unsigned gpio21_pins[] = { 21 };
-+static unsigned gpio22_pins[] = { 22 };
-+static unsigned gpio23_pins[] = { 23 };
-+static unsigned gpio24_pins[] = { 24 };
-+static unsigned gpio25_pins[] = { 25 };
-+static unsigned gpio26_pins[] = { 26 };
-+static unsigned gpio27_pins[] = { 27 };
-+static unsigned gpio28_pins[] = { 28 };
-+static unsigned gpio29_pins[] = { 29 };
-+static unsigned gpio30_pins[] = { 30 };
-+static unsigned gpio31_pins[] = { 31 };
-+static unsigned gpio32_pins[] = { 32 };
-+static unsigned gpio33_pins[] = { 33 };
-+static unsigned gpio34_pins[] = { 34 };
-+static unsigned gpio35_pins[] = { 35 };
-+static unsigned gpio36_pins[] = { 36 };
-+static unsigned gpio37_pins[] = { 37 };
-+static unsigned gpio38_pins[] = { 38 };
-+static unsigned gpio39_pins[] = { 39 };
-+static unsigned gpio40_pins[] = { 40 };
-+static unsigned gpio41_pins[] = { 41 };
-+static unsigned gpio42_pins[] = { 42 };
-+static unsigned gpio43_pins[] = { 43 };
-+static unsigned gpio44_pins[] = { 44 };
-+static unsigned gpio45_pins[] = { 45 };
-+static unsigned gpio46_pins[] = { 46 };
-+static unsigned gpio47_pins[] = { 47 };
-+static unsigned gpio48_pins[] = { 48 };
-+static unsigned gpio49_pins[] = { 49 };
-+
-+#define BCM6318_GROUP(n)                                      \
-+      {                                                       \
-+              .name = #n,                                     \
-+              .pins = n##_pins,                               \
-+              .num_pins = ARRAY_SIZE(n##_pins),               \
-+      }
-+
-+static struct bcm6318_pingroup bcm6318_groups[] = {
-+      BCM6318_GROUP(gpio0),
-+      BCM6318_GROUP(gpio1),
-+      BCM6318_GROUP(gpio2),
-+      BCM6318_GROUP(gpio3),
-+      BCM6318_GROUP(gpio4),
-+      BCM6318_GROUP(gpio5),
-+      BCM6318_GROUP(gpio6),
-+      BCM6318_GROUP(gpio7),
-+      BCM6318_GROUP(gpio8),
-+      BCM6318_GROUP(gpio9),
-+      BCM6318_GROUP(gpio10),
-+      BCM6318_GROUP(gpio11),
-+      BCM6318_GROUP(gpio12),
-+      BCM6318_GROUP(gpio13),
-+      BCM6318_GROUP(gpio14),
-+      BCM6318_GROUP(gpio15),
-+      BCM6318_GROUP(gpio16),
-+      BCM6318_GROUP(gpio17),
-+      BCM6318_GROUP(gpio18),
-+      BCM6318_GROUP(gpio19),
-+      BCM6318_GROUP(gpio20),
-+      BCM6318_GROUP(gpio21),
-+      BCM6318_GROUP(gpio22),
-+      BCM6318_GROUP(gpio23),
-+      BCM6318_GROUP(gpio24),
-+      BCM6318_GROUP(gpio25),
-+      BCM6318_GROUP(gpio26),
-+      BCM6318_GROUP(gpio27),
-+      BCM6318_GROUP(gpio28),
-+      BCM6318_GROUP(gpio29),
-+      BCM6318_GROUP(gpio30),
-+      BCM6318_GROUP(gpio31),
-+      BCM6318_GROUP(gpio32),
-+      BCM6318_GROUP(gpio33),
-+      BCM6318_GROUP(gpio34),
-+      BCM6318_GROUP(gpio35),
-+      BCM6318_GROUP(gpio36),
-+      BCM6318_GROUP(gpio37),
-+      BCM6318_GROUP(gpio38),
-+      BCM6318_GROUP(gpio39),
-+      BCM6318_GROUP(gpio40),
-+      BCM6318_GROUP(gpio41),
-+      BCM6318_GROUP(gpio42),
-+      BCM6318_GROUP(gpio43),
-+      BCM6318_GROUP(gpio44),
-+      BCM6318_GROUP(gpio45),
-+      BCM6318_GROUP(gpio46),
-+      BCM6318_GROUP(gpio47),
-+      BCM6318_GROUP(gpio48),
-+      BCM6318_GROUP(gpio49),
-+};
-+
-+/* GPIO_MODE */
-+static const char * const led_groups[] = {
-+      "gpio0",
-+      "gpio1",
-+      "gpio2",
-+      "gpio3",
-+      "gpio4",
-+      "gpio5",
-+      "gpio6",
-+      "gpio7",
-+      "gpio8",
-+      "gpio9",
-+      "gpio10",
-+      "gpio11",
-+      "gpio12",
-+      "gpio13",
-+      "gpio14",
-+      "gpio15",
-+      "gpio16",
-+      "gpio17",
-+      "gpio18",
-+      "gpio19",
-+      "gpio20",
-+      "gpio21",
-+      "gpio22",
-+      "gpio23",
-+};
-+
-+/* PINMUX_SEL */
-+static const char * const ephy0_spd_led_groups[] = {
-+      "gpio0",
-+};
-+
-+static const char * const ephy1_spd_led_groups[] = {
-+      "gpio1",
-+};
-+
-+static const char * const ephy2_spd_led_groups[] = {
-+      "gpio2",
-+};
-+
-+static const char * const ephy3_spd_led_groups[] = {
-+      "gpio3",
-+};
-+
-+static const char * const ephy0_act_led_groups[] = {
-+      "gpio4",
-+};
-+
-+static const char * const ephy1_act_led_groups[] = {
-+      "gpio5",
-+};
-+
-+static const char * const ephy2_act_led_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const ephy3_act_led_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const serial_led_data_groups[] = {
-+      "gpio6",
-+};
-+
-+static const char * const serial_led_clk_groups[] = {
-+      "gpio7",
-+};
-+
-+static const char * const inet_act_led_groups[] = {
-+      "gpio8",
-+};
-+
-+static const char * const inet_fail_led_groups[] = {
-+      "gpio9",
-+};
-+
-+static const char * const dsl_led_groups[] = {
-+      "gpio10",
-+};
-+
-+static const char * const post_fail_led_groups[] = {
-+      "gpio11",
-+};
-+
-+static const char * const wlan_wps_led_groups[] = {
-+      "gpio12",
-+};
-+
-+static const char * const usb_pwron_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_device_led_groups[] = {
-+      "gpio13",
-+};
-+
-+static const char * const usb_active_groups[] = {
-+      "gpio40",
-+};
-+
-+#define BCM6318_MODE_FUN(n)                           \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mode_val = 1,                          \
-+      }
-+
-+#define BCM6318_MUX_FUN(n, mux)                               \
-+      {                                               \
-+              .name = #n,                             \
-+              .groups = n##_groups,                   \
-+              .num_groups = ARRAY_SIZE(n##_groups),   \
-+              .mux_val = mux,                         \
-+      }
-+
-+static const struct bcm6318_function bcm6318_funcs[] = {
-+      BCM6318_MODE_FUN(led),
-+      BCM6318_MUX_FUN(ephy0_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy1_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy2_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy3_spd_led, 1),
-+      BCM6318_MUX_FUN(ephy0_act_led, 1),
-+      BCM6318_MUX_FUN(ephy1_act_led, 1),
-+      BCM6318_MUX_FUN(ephy2_act_led, 1),
-+      BCM6318_MUX_FUN(ephy3_act_led, 1),
-+      BCM6318_MUX_FUN(serial_led_data, 3),
-+      BCM6318_MUX_FUN(serial_led_clk, 3),
-+      BCM6318_MUX_FUN(inet_act_led, 1),
-+      BCM6318_MUX_FUN(inet_fail_led, 1),
-+      BCM6318_MUX_FUN(dsl_led, 1),
-+      BCM6318_MUX_FUN(post_fail_led, 1),
-+      BCM6318_MUX_FUN(wlan_wps_led, 1),
-+      BCM6318_MUX_FUN(usb_pwron, 1),
-+      BCM6318_MUX_FUN(usb_device_led, 2),
-+      BCM6318_MUX_FUN(usb_active, 2),
-+};
-+
-+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_groups);
-+}
-+
-+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-+                                                unsigned group)
-+{
-+      return bcm6318_groups[group].name;
-+}
-+
-+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+                                        unsigned group, const unsigned **pins,
-+                                        unsigned *num_pins)
-+{
-+      *pins = bcm6318_groups[group].pins;
-+      *num_pins = bcm6318_groups[group].num_pins;
-+
-+      return 0;
-+}
-+
-+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
-+{
-+      return ARRAY_SIZE(bcm6318_funcs);
-+}
-+
-+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
-+                                               unsigned selector)
-+{
-+      return bcm6318_funcs[selector].name;
-+}
-+
-+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
-+                                    unsigned selector,
-+                                    const char * const **groups,
-+                                    unsigned * const num_groups)
-+{
-+      *groups = bcm6318_funcs[selector].groups;
-+      *num_groups = bcm6318_funcs[selector].num_groups;
-+
-+      return 0;
-+}
-+
-+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin,
-+                          u32 mode, u32 mux)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      if (pin < 32) {
-+              reg = __raw_readl(pctl->mode);
-+              reg &= ~BIT(pin);
-+              if (mode)
-+                      reg |= BIT(pin);
-+              __raw_writel(reg, pctl->mode);
-+      }
-+
-+      if (pin < 48) {
-+              reg = __raw_readl(pctl->mux[pin / 16]);
-+              reg &= ~(3UL << ((pin % 16) * 2));
-+              reg |= mux << ((pin % 16) * 2);
-+              __raw_writel(reg, pctl->mux[pin / 16]);
-+      }
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val)
-+{
-+      unsigned long flags;
-+      u32 reg;
-+
-+      spin_lock_irqsave(&pctl->lock, flags);
-+      reg = __raw_readl(pctl->pad[pin / 8]);
-+      reg &= ~(0xfUL << ((pin % 8) * 4));
-+      reg |= val << ((pin % 8) * 4);
-+      __raw_writel(reg, pctl->pad[pin / 8]);
-+      spin_unlock_irqrestore(&pctl->lock, flags);
-+}
-+
-+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
-+                                 unsigned selector, unsigned group)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+      const struct bcm6318_pingroup *grp = &bcm6318_groups[group];
-+      const struct bcm6318_function *f = &bcm6318_funcs[selector];
-+
-+      bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val);
-+
-+      return 0;
-+}
-+
-+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
-+                                     struct pinctrl_gpio_range *range,
-+                                     unsigned offset)
-+{
-+      struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
-+
-+      /* disable all functions using this pin */
-+      if (offset < 13) {
-+              /* GPIOs 0-12 use mux 0 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 0);
-+      } else if (offset < 42) {
-+              /* GPIOs 13-41 use mux 3 as GPIO function */
-+              bcm6318_rmw_mux(pctl, offset, 0, 3);
-+
-+              /* FIXME: revert to old value for non gpio? */
-+              bcm6318_set_pad(pctl, offset, 0);
-+      } else {
-+              /* no idea, really */
-+      }
-+
-+      return 0;
-+}
-+
-+static struct pinctrl_ops bcm6318_pctl_ops = {
-+      .get_groups_count       = bcm6318_pinctrl_get_group_count,
-+      .get_group_name         = bcm6318_pinctrl_get_group_name,
-+      .get_group_pins         = bcm6318_pinctrl_get_group_pins,
-+#ifdef CONFIG_OF
-+      .dt_node_to_map         = pinconf_generic_dt_node_to_map_pin,
-+      .dt_free_map            = pinctrl_utils_free_map,
-+#endif
-+};
-+
-+static struct pinmux_ops bcm6318_pmx_ops = {
-+      .get_functions_count    = bcm6318_pinctrl_get_func_count,
-+      .get_function_name      = bcm6318_pinctrl_get_func_name,
-+      .get_function_groups    = bcm6318_pinctrl_get_groups,
-+      .set_mux                = bcm6318_pinctrl_set_mux,
-+      .gpio_request_enable    = bcm6318_gpio_request_enable,
-+      .strict                 = true,
-+};
-+
-+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
-+{
-+      struct bcm6318_pinctrl *pctl;
-+      struct resource *res;
-+      void __iomem *mode, *mux, *pad;
-+      unsigned i;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode");
-+      mode = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mode))
-+              return PTR_ERR(mode);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux");
-+      mux = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(mux))
-+              return PTR_ERR(mux);
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad");
-+      pad = devm_ioremap_resource(&pdev->dev, res);
-+      if (IS_ERR(pad))
-+              return PTR_ERR(pad);
-+
-+      pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
-+      if (!pctl)
-+              return -ENOMEM;
-+
-+      spin_lock_init(&pctl->lock);
-+
-+      pctl->mode = mode;
-+
-+      for (i = 0; i < 3; i++)
-+              pctl->mux[i] = mux + (i * 4);
-+
-+      for (i = 0; i < 6; i++)
-+              pctl->pad[i] = pad + (i * 4);
-+
-+      pctl->desc.name = dev_name(&pdev->dev);
-+      pctl->desc.owner = THIS_MODULE;
-+      pctl->desc.pctlops = &bcm6318_pctl_ops;
-+      pctl->desc.pmxops = &bcm6318_pmx_ops;
-+
-+      pctl->desc.npins = ARRAY_SIZE(bcm6318_pins);
-+      pctl->desc.pins = bcm6318_pins;
-+
-+      platform_set_drvdata(pdev, pctl);
-+
-+      pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
-+                                               pctl->gpio, BCM6318_NGPIO);
-+      if (IS_ERR(pctl->pctldev))
-+              return PTR_ERR(pctl->pctldev);
-+
-+      return 0;
-+}
-+
-+static const struct of_device_id bcm6318_pinctrl_match[] = {
-+      { .compatible = "brcm,bcm6318-pinctrl", },
-+      { },
-+};
-+
-+static struct platform_driver bcm6318_pinctrl_driver = {
-+      .probe = bcm6318_pinctrl_probe,
-+      .driver = {
-+              .name = "bcm6318-pinctrl",
-+              .of_match_table = bcm6318_pinctrl_match,
-+      },
-+};
-+
-+builtin_platform_driver(bcm6318_pinctrl_driver);
diff --git a/target/linux/brcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch b/target/linux/brcm63xx/patches-4.19/383-bcm63xx_select_pinctrl.patch
deleted file mode 100644 (file)
index 67c8cee..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6318
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6328
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6348
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6358
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6362
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM6368
- config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+      select PINCTRL
-+      select PINCTRL_BCM63268
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/brcm63xx/patches-4.19/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch
deleted file mode 100644 (file)
index fe4dbe3..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 31 Jul 2017 20:10:36 +0200
-Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree
-
----
- arch/mips/bcm63xx/clk.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[]
-       /* fixed rate clocks */
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enet0", &clk_enet0),
-       CLKDEV_INIT(NULL, "enet1", &clk_enet1),
-@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000100.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000120.serial", "refclk", &clk_periph),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
-@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[]
-       CLKDEV_INIT(NULL, "periph", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
-+      CLKDEV_INIT("10000180.serial", "refclk", &clk_periph),
-+      CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph),
-       CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
-+      CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll),
-       /* gated clocks */
-       CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
-       CLKDEV_INIT(NULL, "usbh", &clk_usbh),
diff --git a/target/linux/brcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/brcm63xx/patches-4.19/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch
deleted file mode 100644 (file)
index 03b8bfc..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 4 Feb 2017 12:58:50 +0100
-Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers
-
-We now register them through DT, so no need to keep them here.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -27,9 +27,7 @@
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -236,10 +234,6 @@ int __init board_register_devices(void)
-            bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
-               pr_err(PFX "failed to register fallback SPROM\n");
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-uart.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_hsspi_device = {
--      .name           = "bcm63xx-hsspi",
--      .id             = 0,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_hsspi_register(void)
--{
--      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
--              !BCMCPU_IS_63268())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
--
--      return platform_device_register(&bcm63xx_hsspi_device);
--}
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ /dev/null
-@@ -1,60 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/export.h>
--#include <linux/platform_device.h>
--#include <linux/err.h>
--#include <linux/clk.h>
--
--#include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_regs.h>
--
--static struct resource spi_resources[] = {
--      {
--              .start          = -1, /* filled at runtime */
--              .end            = -1, /* filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              .start          = -1, /* filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_spi_device = {
--      .id             = -1,
--      .num_resources  = ARRAY_SIZE(spi_resources),
--      .resource       = spi_resources,
--};
--
--int __init bcm63xx_spi_register(void)
--{
--      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
--              return -ENODEV;
--
--      spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
--      spi_resources[0].end = spi_resources[0].start;
--      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
--
--      if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
--              bcm63xx_spi_device.name = "bcm6348-spi",
--              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
--      }
--
--      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
--              bcm63xx_spi_device.name = "bcm6358-spi",
--              spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
--      }
--
--      return platform_device_register(&bcm63xx_spi_device);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ /dev/null
-@@ -1,9 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_HSSPI_H
--#define BCM63XX_DEV_HSSPI_H
--
--#include <linux/types.h>
--
--int bcm63xx_hsspi_register(void);
--
--#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/brcm63xx/patches-4.19/391-MIPS-BCM63XX-do-not-register-uart.patch
deleted file mode 100644 (file)
index e9d4481..0000000
+++ /dev/null
@@ -1,259 +0,0 @@
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
--                 dev-rng.o dev-uart.o dev-wdt.o \
-+                 dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
-                  sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ /dev/null
-@@ -1,76 +0,0 @@
--/*
-- * This file is subject to the terms and conditions of the GNU General Public
-- * License.  See the file "COPYING" in the main directory of this archive
-- * for more details.
-- *
-- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- */
--
--#include <linux/init.h>
--#include <linux/kernel.h>
--#include <linux/platform_device.h>
--#include <bcm63xx_cpu.h>
--
--static struct resource uart0_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct resource uart1_resources[] = {
--      {
--              /* start & end filled at runtime */
--              .flags          = IORESOURCE_MEM,
--      },
--      {
--              /* start filled at runtime */
--              .flags          = IORESOURCE_IRQ,
--      },
--};
--
--static struct platform_device bcm63xx_uart_devices[] = {
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 0,
--              .num_resources  = ARRAY_SIZE(uart0_resources),
--              .resource       = uart0_resources,
--      },
--
--      {
--              .name           = "bcm63xx_uart",
--              .id             = 1,
--              .num_resources  = ARRAY_SIZE(uart1_resources),
--              .resource       = uart1_resources,
--      }
--};
--
--int __init bcm63xx_uart_register(unsigned int id)
--{
--      if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
--              return -ENODEV;
--
--      if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6368()))
--              return -ENODEV;
--
--      if (id == 0) {
--              uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
--              uart0_resources[0].end = uart0_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
--      }
--
--      if (id == 1) {
--              uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
--              uart1_resources[0].end = uart1_resources[0].start +
--                      RSET_UART_SIZE - 1;
--              uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
--      }
--
--      return platform_device_register(&bcm63xx_uart_devices[id]);
--}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
-+++ /dev/null
-@@ -1,7 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--#ifndef BCM63XX_DEV_UART_H_
--#define BCM63XX_DEV_UART_H_
--
--int bcm63xx_uart_register(unsigned int id);
--
--#endif /* BCM63XX_DEV_UART_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -32,8 +32,6 @@ struct board_info {
-       unsigned int    has_ohci0:1;
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
--      unsigned int    has_uart0:1;
--      unsigned int    has_uart1:1;
-       unsigned int    use_fallback_sprom:1;
-       /* ethernet config */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -20,7 +20,6 @@
- #include <asm/prom.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_gpio.h>
-@@ -188,12 +187,6 @@ int __init board_register_devices(void)
-       bcm63xx_gpio_init();
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
-       if (board.has_pccard)
-               bcm63xx_pcmcia_register();
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,9 +35,6 @@ static struct board_info __initdata boar
-       .name                           = "CVG834G_E15R3921",
-       .expected_cpu_id                = 0x3368,
--      .has_uart0                      = 1,
--      .has_uart1                      = 1,
--
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-@@ -67,7 +64,6 @@ static struct board_info __initdata boar
-       .name                           = "96328avng",
-       .expected_cpu_id                = 0x6328,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .has_usbd                       = 0,
-       .use_fallback_sprom             = 1,
-@@ -116,7 +112,6 @@ static struct board_info __initdata boar
-       .name                           = "96338GW",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -159,7 +154,6 @@ static struct board_info __initdata boar
-       .name                           = "96338W",
-       .expected_cpu_id                = 0x6338,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-               .force_speed_100        = 1,
-@@ -204,8 +198,6 @@ static struct board_info __initdata boar
- static struct board_info __initdata board_96345gw2 = {
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
--
--      .has_uart0                      = 1,
- };
- #endif
-@@ -217,7 +209,6 @@ static struct board_info __initdata boar
-       .name                           = "96348R",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-@@ -262,7 +253,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-10",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -315,7 +305,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-11",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -370,7 +359,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -421,7 +409,6 @@ static struct board_info __initdata boar
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -466,7 +453,6 @@ static struct board_info __initdata boar
-       .name                           = "DV201AMR",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_pci                        = 1,
-       .use_fallback_sprom             = 1,
-       .has_ohci0                      = 1,
-@@ -487,7 +473,6 @@ static struct board_info __initdata boar
-       .name                           = "96348GW-A",
-       .expected_cpu_id                = 0x6348,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -514,7 +499,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -567,7 +551,6 @@ static struct board_info __initdata boar
-       .name                           = "96358VW2",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -617,7 +600,6 @@ static struct board_info __initdata boar
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
--      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
diff --git a/target/linux/brcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/brcm63xx/patches-4.19/392-MIPS-BCM63XX-remove-leds-and-buttons.patch
deleted file mode 100644 (file)
index e139426..0000000
+++ /dev/null
@@ -1,343 +0,0 @@
-From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Feb 2015 17:52:32 +0100
-Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  262 -----------------------------
- 1 file changed, 262 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -43,14 +43,6 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
--      .leds = {
--              {
--                      .name           = "CVG834G:green:power",
--                      .gpio           = 37,
--                      .default_trigger= "default-on",
--              },
--      },
--
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
-@@ -72,35 +64,6 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
--
--      .leds = {
--              {
--                      .name           = "96328avng::ppp-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::power",
--                      .gpio           = 4,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "96328avng::power-fail",
--                      .gpio           = 8,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::wps",
--                      .gpio           = 9,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "96328avng::ppp",
--                      .gpio           = 11,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -119,35 +82,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              }
--      },
- };
- static struct board_info __initdata board_96338w = {
-@@ -159,35 +93,6 @@ static struct board_info __initdata boar
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ses",
--                      .gpio           = 5,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- #endif
-@@ -217,36 +122,6 @@ static struct board_info __initdata boar
-               .has_phy                = 1,
-               .use_internal_phy       = 1,
-       },
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_10 = {
-@@ -270,35 +145,6 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw_11 = {
-@@ -324,35 +170,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -374,35 +191,6 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 2,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 3,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 0,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 1,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -518,33 +306,6 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
--
--      .leds = {
--              {
--                      .name           = "adsl-fail",
--                      .gpio           = 15,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 4,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 5,
--              },
--      },
- };
- static struct board_info __initdata board_96358vw2 = {
-@@ -571,29 +332,6 @@ static struct board_info __initdata boar
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
--
--      .leds = {
--              {
--                      .name           = "adsl",
--                      .gpio           = 22,
--                      .active_low     = 1,
--              },
--              {
--                      .name           = "ppp-fail",
--                      .gpio           = 23,
--              },
--              {
--                      .name           = "power",
--                      .gpio           = 5,
--                      .active_low     = 1,
--                      .default_trigger = "default-on",
--              },
--              {
--                      .name           = "stop",
--                      .gpio           = 4,
--                      .active_low     = 1,
--              },
--      },
- };
- static struct board_info __initdata board_AGPFS0 = {
diff --git a/target/linux/brcm63xx/patches-4.19/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-4.19/400-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index c693ace..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio
-       }
- };
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
-       int nulllen = 0;
-       int numslots;
-       unsigned long offset;
-+      unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-       static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (data && data->origin) {
-+              fis_origin = data->origin;
-+      } else {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
-                       goto out;
-               }
-               new_fl->img = &buf[i];
--              if (data && data->origin)
--                      buf[i].flash_base -= data->origin;
--              else
--                      buf[i].flash_base &= master->size-1;
-+              if (fis_origin)
-+                      buf[i].flash_base -= fis_origin;
-+
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-4.19/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644 (file)
index efefba4..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/bcm963xx_tag.h
-+++ b/include/linux/bcm963xx_tag.h
-@@ -92,8 +92,10 @@ struct bcm_tag {
-       __u32 rootfs_crc;
-       /* 224-227: CRC32 of kernel partition */
-       __u32 kernel_crc;
--      /* 228-235: Unused at present */
--      char reserved1[8];
-+      /* 228-231: Unused at present */
-+      char reserved1[4];
-+      /* 222-235: Openwrt: real rootfs length */
-+      __u32 real_rootfs_length;
-       /* 236-239: CRC32 of header excluding last 20 bytes */
-       __u32 header_crc;
-       /* 240-255: Unused at present */
---- a/drivers/mtd/parsers/parser_imagetag.c
-+++ b/drivers/mtd/parsers/parser_imagetag.c
-@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti
-               } else {
-                       /* OpenWrt layout */
-                       rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
-+                      rootfslen = buf->real_rootfs_length;
-+                      spareaddr = rootfsaddr + rootfslen;
-               }
-       } else {
-               goto out;
diff --git a/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-4.19/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index c3b5778..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1634,7 +1634,7 @@ static int bcm_enet_change_mtu(struct ne
-               return -EBUSY;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       /*
-        * setup maximum size before we get overflow mark in
diff --git a/target/linux/brcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-4.19/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index efd9763..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -97,6 +97,8 @@ void __init board_early_setup(const stru
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -652,6 +652,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-4.19/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644 (file)
index e30bd5b..0000000
+++ /dev/null
@@ -1,265 +0,0 @@
-From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++--------------
- 1 file changed, 78 insertions(+), 80 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -867,10 +867,8 @@ static int bcm_enet_open(struct net_devi
-       struct bcm_enet_priv *priv;
-       struct sockaddr addr;
-       struct device *kdev;
--      struct phy_device *phydev;
-       int i, ret;
-       unsigned int size;
--      char phy_id[MII_BUS_ID_SIZE + 3];
-       void *p;
-       u32 val;
-@@ -878,40 +876,10 @@ static int bcm_enet_open(struct net_devi
-       kdev = &priv->pdev->dev;
-       if (priv->has_phy) {
--              /* connect to PHY */
--              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--                       priv->mii_bus->id, priv->phy_id);
--
--              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
--                                   PHY_INTERFACE_MODE_MII);
--
--              if (IS_ERR(phydev)) {
--                      dev_err(kdev, "could not attach to PHY\n");
--                      return PTR_ERR(phydev);
--              }
--
--              /* mask with MAC supported features */
--              phydev->supported &= (SUPPORTED_10baseT_Half |
--                                    SUPPORTED_10baseT_Full |
--                                    SUPPORTED_100baseT_Half |
--                                    SUPPORTED_100baseT_Full |
--                                    SUPPORTED_Autoneg |
--                                    SUPPORTED_Pause |
--                                    SUPPORTED_MII);
--              phydev->advertising = phydev->supported;
--
--              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--                      phydev->advertising |= SUPPORTED_Pause;
--              else
--                      phydev->advertising &= ~SUPPORTED_Pause;
--
--              phy_attached_info(phydev);
--
-+              /* Reset state */
-               priv->old_link = 0;
-               priv->old_duplex = -1;
-               priv->old_pause = -1;
--      } else {
--              phydev = NULL;
-       }
-       /* mask all interrupts and request them */
-@@ -921,7 +889,7 @@ static int bcm_enet_open(struct net_devi
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
--              goto out_phy_disconnect;
-+              return ret;
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
-                         dev->name, dev);
-@@ -1083,8 +1051,8 @@ static int bcm_enet_open(struct net_devi
-       enet_dmac_writel(priv, priv->dma_chan_int_mask,
-                        ENETDMAC_IRMASK, priv->tx_chan);
--      if (phydev)
--              phy_start(phydev);
-+      if (priv->has_phy)
-+              phy_start(dev->phydev);
-       else
-               bcm_enet_adjust_link(dev);
-@@ -1125,10 +1093,6 @@ out_freeirq_rx:
- out_freeirq:
-       free_irq(dev->irq, dev);
--out_phy_disconnect:
--      if (phydev)
--              phy_disconnect(phydev);
--
-       return ret;
- }
-@@ -1233,10 +1197,6 @@ static int bcm_enet_stop(struct net_devi
-       free_irq(priv->irq_rx, dev);
-       free_irq(dev->irq, dev);
--      /* release phy */
--      if (priv->has_phy)
--              phy_disconnect(dev->phydev);
--
-       return 0;
- }
-@@ -1802,14 +1762,47 @@ static int bcm_enet_probe(struct platfor
-       /* do minimal hardware init to be able to probe mii bus */
-       bcm_enet_hw_preinit(priv);
-+      spin_lock_init(&priv->rx_lock);
-+
-+      /* init rx timeout (used for oom) */
-+      timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
-+
-+      /* init the mib update lock&work */
-+      mutex_init(&priv->mib_update_lock);
-+      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
-+
-+      /* zero mib counters */
-+      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
-+              enet_writel(priv, 0, ENET_MIB_REG(i));
-+
-+      /* register netdevice */
-+      dev->netdev_ops = &bcm_enet_ops;
-+      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+
-+      dev->ethtool_ops = &bcm_enet_ethtool_ops;
-+      /* MTU range: 46 - 2028 */
-+      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
-+      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
-+      SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+      ret = register_netdev(dev);
-+      if (ret)
-+              goto out_uninit_hw;
-+
-+      netif_carrier_off(dev);
-+      platform_set_drvdata(pdev, dev);
-+      priv->pdev = pdev;
-+      priv->net_dev = dev;
-       /* MII bus registration */
-       if (priv->has_phy) {
-+              struct phy_device *phydev;
-+              char phy_id[MII_BUS_ID_SIZE + 3];
-               priv->mii_bus = mdiobus_alloc();
-               if (!priv->mii_bus) {
-                       ret = -ENOMEM;
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-               bus = priv->mii_bus;
-@@ -1833,6 +1826,35 @@ static int bcm_enet_probe(struct platfor
-                       dev_err(&pdev->dev, "unable to register mdio bus\n");
-                       goto out_free_mdio;
-               }
-+
-+              /* connect to PHY */
-+              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+                       priv->mii_bus->id, priv->phy_id);
-+
-+              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
-+                                   PHY_INTERFACE_MODE_MII);
-+
-+              if (IS_ERR(phydev)) {
-+                      dev_err(&pdev->dev, "could not attach to PHY\n");
-+                      goto out_unregister_mdio;
-+              }
-+
-+              /* mask with MAC supported features */
-+              phydev->supported &= (SUPPORTED_10baseT_Half |
-+                                    SUPPORTED_10baseT_Full |
-+                                    SUPPORTED_100baseT_Half |
-+                                    SUPPORTED_100baseT_Full |
-+                                    SUPPORTED_Autoneg |
-+                                    SUPPORTED_Pause |
-+                                    SUPPORTED_MII);
-+              phydev->advertising = phydev->supported;
-+
-+              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+                      phydev->advertising |= SUPPORTED_Pause;
-+              else
-+                      phydev->advertising &= ~SUPPORTED_Pause;
-+
-+              phy_attached_info(phydev);
-       } else {
-               /* run platform code to initialize PHY device */
-@@ -1840,45 +1862,16 @@ static int bcm_enet_probe(struct platfor
-                   pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
-                                  bcm_enet_mdio_write_mii)) {
-                       dev_err(&pdev->dev, "unable to configure mdio bus\n");
--                      goto out_uninit_hw;
-+                      goto out_unregister_netdev;
-               }
-       }
--      spin_lock_init(&priv->rx_lock);
--
--      /* init rx timeout (used for oom) */
--      timer_setup(&priv->rx_timeout, bcm_enet_refill_rx_timer, 0);
--
--      /* init the mib update lock&work */
--      mutex_init(&priv->mib_update_lock);
--      INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
--
--      /* zero mib counters */
--      for (i = 0; i < ENET_MIB_REG_COUNT; i++)
--              enet_writel(priv, 0, ENET_MIB_REG(i));
--
--      /* register netdevice */
--      dev->netdev_ops = &bcm_enet_ops;
--      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
--
--      dev->ethtool_ops = &bcm_enet_ethtool_ops;
--      /* MTU range: 46 - 2028 */
--      dev->min_mtu = ETH_ZLEN - ETH_HLEN;
--      dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
--      SET_NETDEV_DEV(dev, &pdev->dev);
--
--      ret = register_netdev(dev);
--      if (ret)
--              goto out_unregister_mdio;
--
--      netif_carrier_off(dev);
--      platform_set_drvdata(pdev, dev);
--      priv->pdev = pdev;
--      priv->net_dev = dev;
--
-       return 0;
- out_unregister_mdio:
-+      if (dev->phydev)
-+              phy_disconnect(dev->phydev);
-+
-       if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
-@@ -1886,6 +1879,9 @@ out_free_mdio:
-       if (priv->mii_bus)
-               mdiobus_free(priv->mii_bus);
-+out_unregister_netdev:
-+      unregister_netdev(dev);
-+
- out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
-@@ -1916,6 +1912,7 @@ static int bcm_enet_remove(struct platfo
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->has_phy) {
-+              phy_disconnect(dev->phydev);
-               mdiobus_unregister(priv->mii_bus);
-               mdiobus_free(priv->mii_bus);
-       } else {
diff --git a/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-4.19/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644 (file)
index 86940ae..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -968,6 +968,19 @@
- #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG              (0xb0)
- #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2185,6 +2185,18 @@ static int bcm_enetsw_open(struct net_de
-               priv->sw_port_link[i] = 0;
-       }
-+      /* enable external ports */
-+      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+              u8 rgmii_ctrl;
-+
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+
-+              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+      }
-+
-       /* reset mib */
-       val = enetsw_readb(priv, ENETSW_GMCR_REG);
-       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-4.19/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644 (file)
index a91494d..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -17,6 +17,9 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/mtd/spi-nor.h>
-+#include <linux/of.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas
-       mtd_resources[0].end = end;
- }
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+      {
-+              .bus_num        = 0,
-+              .chip_select    = 0,
-+              .mode           = 0,
-+              .max_speed_hz   = 781000,
-+              .modalias       = "m25p80",
-+      },
-+};
-+
-+static void bcm63xx_of_update_spi_flash_speed(struct device_node *np,
-+                                             unsigned int new_hz)
-+{
-+      struct property *max_hz;
-+      __be32 *hz;
-+
-+      max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL);
-+      if (!max_hz)
-+              return;
-+
-+      max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL);
-+      if (!max_hz->name) {
-+              kfree(max_hz);
-+              return;
-+      }
-+
-+      max_hz->value = max_hz + 1;
-+      max_hz->length = sizeof(*hz);
-+
-+      hz = max_hz->value;
-+      *hz = cpu_to_be32(new_hz);
-+
-+      of_update_property(np, max_hz);
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6318_CPU_ID:
-               /* only support serial flash */
-+              bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
-               return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6362_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-                       return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+              if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
-                       return BCM63XX_FLASH_TYPE_NAND;
-@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t
-               }
-       case BCM63268_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void)
- int __init bcm63xx_flash_register(void)
- {
-+      struct device_node *np;
-       u32 val;
-       switch (flash_type) {
-@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void)
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
--              pr_warn("unsupported serial flash detected\n");
--              return -ENODEV;
-+              np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor");
-+              if (np) {
-+                      bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz);
-+                      of_node_put(np);
-+                      return 0;
-+              } else {
-+                      return -ENODEV;
-+              }
-       case BCM63XX_FLASH_TYPE_NAND:
-               pr_warn("unsupported NAND flash detected\n");
-               return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -709,6 +709,7 @@
- #define GPIO_STRAPBUS_REG             0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND   0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1565,6 +1566,7 @@
- #define IDDQ_CTRL_63268_USBH          (1 << 4)
- #define MISC_STRAPBUS_6328_REG                0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-4.19/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644 (file)
index 16d47b4..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -31,6 +31,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- #include "board_common.h"
-@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      int i;
- #if CONFIG_OF
-       if (of_have_populated_dt()) {
-@@ -241,6 +243,10 @@ int __init board_register_devices(void)
-                                       board.ephy_reset_gpio_flags);
-       }
-+      /* register any fixups */
-+      for (i = 0; i < board.has_caldata; i++)
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
-+#include <pci_ath9k_fixup.h>
- /*
-  * flash mapping
-@@ -16,6 +17,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
-+struct ath9k_caldata {
-+      unsigned int    slot;
-+      u32             caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -33,6 +39,10 @@ struct board_info {
-       unsigned int    has_ehci0:1;
-       unsigned int    has_usbd:1;
-       unsigned int    use_fallback_sprom:1;
-+      unsigned int    has_caldata:2;
-+
-+      /* wifi calibration data config */
-+      struct ath9k_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-4.19/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
deleted file mode 100644 (file)
index 9fbfae4..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 13 Jan 2014 12:12:30 +0100
-Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void)
-               return -ENODEV;
-       }
- }
-+
-+int bcm63xx_flash_get_type(void)
-+{
-+      return flash_type;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre
- int __init bcm63xx_flash_register(void);
-+int bcm63xx_flash_get_type(void);
-+
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-4.19/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644 (file)
index c9d2ee1..0000000
+++ /dev/null
@@ -1,237 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 sprom.o
-+                 pci-ath9k-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,200 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <pci_ath9k_fixup.h>
-+
-+#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+struct ath9k_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+      u32 addr;
-+
-+      if (BCMCPU_IS_6328()) {
-+              addr = 0x18000000;
-+      } else {
-+              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              addr &= MPI_CSBASE_BASE_MASK;
-+      }
-+
-+      switch (bcm63xx_flash_get_type()) {
-+      case BCM63XX_FLASH_TYPE_PARALLEL:
-+              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+              return eeprom;
-+      case BCM63XX_FLASH_TYPE_SERIAL:
-+              /* the first megabyte is memory mapped */
-+              if (offset < 0x100000) {
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      return eeprom;
-+              }
-+
-+              if (BCMCPU_IS_6328()) {
-+                      /* we can change the memory mapped megabyte */
-+                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      bcm_hsspi_writel(0, 0x18);
-+                      return eeprom;
-+              }
-+              /* can't do anything here without talking to the SPI controller. */
-+      case BCM63XX_FLASH_TYPE_NAND:
-+      default:
-+              return NULL;
-+      }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+      void __iomem *mem;
-+      struct ath9k_platform_data *pdata = NULL;
-+      struct pci_dev *bridge = pci_upstream_bridge(dev);
-+      u16 *cal_data = NULL;
-+      u16 cmd;
-+      u32 bar0;
-+      u32 val;
-+      unsigned i;
-+
-+      for (i = 0; i < ath9k_num_fixups; i++) {
-+              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+              pdata = &ath9k_fixups[i].pdata;
-+              break;
-+      }
-+
-+      if (cal_data == NULL)
-+              return;
-+
-+      if (*cal_data != 0xa55a) {
-+              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              val = BCM_PCIE_MEM_BASE_PA_6328;
-+              break;
-+      case BCM6348_CPU_ID:
-+      case BCM6358_CPU_ID:
-+      case BCM6368_CPU_ID:
-+              val = BCM_PCI_MEM_BASE_PA;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      mem = ioremap(val, 0x10000);
-+      if (!mem) {
-+              pr_err("pci %s: ioremap error\n", pci_name(dev));
-+              return;
-+      }
-+
-+      if (bridge)
-+              pci_enable_device(bridge);
-+
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      /* set offset to first reg address */
-+      cal_data += 3;
-+      while(*cal_data != 0xffff) {
-+              u32 reg;
-+              reg = *cal_data++;
-+              val = *cal_data++;
-+              val |= (*cal_data++) << 16;
-+
-+              writel(val, mem + reg);
-+              udelay(100);
-+      }
-+
-+      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+      dev->vendor = val & 0xffff;
-+      dev->device = (val >> 16) & 0xffff;
-+
-+      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+      dev->revision = val & 0xff;
-+      dev->class = val >> 8; /* upper 3 bytes */
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+      if (bridge)
-+              pci_disable_device(bridge);
-+
-+      iounmap(mem);
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+              return;
-+
-+      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+      ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-4.19/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644 (file)
index 2076879..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check) __init;
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@
- struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-+      unsigned int    endian_check:1;
- };
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-+      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -245,7 +245,8 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+                      board.caldata[i].endian_check);
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-4.19/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644 (file)
index bb111dc..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -246,7 +246,7 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
-               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check);
-+                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-       return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check)
-+      unsigned endian_check, int led_pin, bool led_active_high)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -21,6 +21,8 @@ struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-       unsigned int    endian_check:1;
-+      int             led_pin;
-+      bool            led_active_high;
- };
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check) __init;
-+      unsigned endian_check, int led_pin, bool led_active_high) __init;
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-4.19/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index cc980a1..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -3,7 +3,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
-                  dev-rng.o dev-wdt.o \
-                  dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \
--                 pci-ath9k-fixup.o sprom.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -32,6 +32,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include "board_common.h"
-@@ -244,9 +245,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin, board.caldata[i].led_active_high);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -10,6 +10,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -17,12 +18,16 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-       bool            led_active_high;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -45,7 +50,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-4.19/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644 (file)
index 3f093cf..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -332,6 +332,9 @@ struct bcm_enet_priv {
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-       int sw_port_link[ENETSW_MAX_PORT];
-+      /* platform device for associated switch */
-+      struct platform_device *b53_device;
-+
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1932,7 +1933,8 @@ static int bcm_enet_remove(struct platfo
-       return 0;
- }
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
-       .probe  = bcm_enet_probe,
-       .remove = bcm_enet_remove,
-       .driver = {
-@@ -1941,6 +1943,42 @@ struct platform_driver bcm63xx_enet_driv
-       },
- };
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+      .chip_id = 0x6300,
-+      .big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+      .name           = "b53-switch",
-+      .id             = -1,
-+      .dev            = {
-+              .platform_data = &bcm63xx_b53_pdata,
-+      },
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+      int ret;
-+
-+      bcm63xx_b53_pdata.regs = priv->base;
-+      bcm63xx_b53_pdata.enabled_ports = port_mask;
-+      bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+      ret = platform_device_register(&bcm63xx_b53_dev);
-+      if (!ret)
-+              priv->b53_device = &bcm63xx_b53_dev;
-+
-+      return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+      if (priv->b53_device)
-+              platform_device_unregister(&bcm63xx_b53_dev);
-+
-+      priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2197,29 +2235,6 @@ static int bcm_enetsw_open(struct net_de
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
--      /* reset mib */
--      val = enetsw_readb(priv, ENETSW_GMCR_REG);
--      val |= ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--      val &= ~ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--
--      /* force CPU port state */
--      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--      /* enable switch forward engine */
--      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--      val |= ENETSW_SWMODE_FWD_EN_MASK;
--      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--      /* enable jumbo on all ports */
--      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
-       /* initialize flow control buffer allocation */
-       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2675,6 +2690,9 @@ static int bcm_enetsw_probe(struct platf
-       struct bcm63xx_enetsw_platform_data *pd;
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
-+      unsigned i, num_ports = 0;
-+      u16 port_mask = BIT(8);
-+      u8 val;
-       if (!bcm_enet_shared_base[0])
-               return -EPROBE_DEFER;
-@@ -2755,6 +2773,43 @@ static int bcm_enetsw_probe(struct platf
-       priv->pdev = pdev;
-       priv->net_dev = dev;
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+              if (!port->used)
-+                      continue;
-+
-+              num_ports++;
-+              port_mask |= BIT(i);
-+      }
-+
-+      /* only register if there is more than one external port */
-+      if (num_ports > 1)
-+              bcmenet_switch_register(priv, port_mask);
-+
-       return 0;
- out_disable_clk:
-@@ -2776,6 +2831,9 @@ static int bcm_enetsw_remove(struct plat
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
-+      /* remove switch */
-+      bcmenet_switch_unregister(priv);
-+
-       clk_disable_unprepare(priv->mac_clk);
-       free_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-4.19/424-bcm63xx_enet_no_request_mem_region.patch
deleted file mode 100644 (file)
index e956dea..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2734,9 +2734,9 @@ static int bcm_enetsw_probe(struct platf
-       if (ret)
-               goto out;
--      priv->base = devm_ioremap_resource(&pdev->dev, res_mem);
--      if (IS_ERR(priv->base)) {
--              ret = PTR_ERR(priv->base);
-+      priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem));
-+      if (priv->base == NULL) {
-+              ret = -ENOMEM;
-               goto out;
-       }
diff --git a/target/linux/brcm63xx/patches-4.19/427-boards_probe_switch.patch b/target/linux/brcm63xx/patches-4.19/427-boards_probe_switch.patch
deleted file mode 100644 (file)
index 4b206a2..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -77,6 +77,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -90,6 +92,8 @@ static struct board_info __initdata boar
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -138,6 +142,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -162,6 +168,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -186,6 +194,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -208,6 +218,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -231,6 +243,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -252,6 +266,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -271,6 +287,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -298,6 +316,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -323,6 +343,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -348,6 +370,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -371,6 +395,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
diff --git a/target/linux/brcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch b/target/linux/brcm63xx/patches-4.19/499-allow_better_context_for_board_patches.patch
deleted file mode 100644 (file)
index dd63183..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -46,7 +46,7 @@ static struct board_info __initdata boar
-       .ephy_reset_gpio                = 36,
-       .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-  * known 6328 boards
-@@ -65,7 +65,7 @@ static struct board_info __initdata boar
-               .port_no                = 0,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-  * known 6338 boards
-@@ -98,7 +98,7 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-  * known 6345 boards
-@@ -108,7 +108,7 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-  * known 6348 boards
-@@ -295,7 +295,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-  * known 6358 boards
-@@ -403,7 +403,7 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
--#endif
-+#endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-  * all boards
diff --git a/target/linux/brcm63xx/patches-4.19/500-board-D4PW.patch b/target/linux/brcm63xx/patches-4.19/500-board-D4PW.patch
deleted file mode 100644 (file)
index 456b2a4..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -295,6 +295,21 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -431,6 +446,7 @@ static const struct board_info __initcon
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.19/501-board-NB4.patch b/target/linux/brcm63xx/patches-4.19/501-board-NB4.patch
deleted file mode 100644 (file)
index 41c8a7e..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -418,6 +418,60 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -454,6 +508,8 @@ static const struct board_info __initcon
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_fxc_r1,
- #endif
- };
-@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-+      { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-+      { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-4.19/502-board-96338W2_E7T.patch
deleted file mode 100644 (file)
index 69cc716..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -98,6 +98,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+      .name                           = "96338W2_E7T",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -487,6 +501,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-       &board_96338w,
-+      &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
diff --git a/target/linux/brcm63xx/patches-4.19/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-4.19/503-board-CPVA642.patch
deleted file mode 100644 (file)
index 9e3c4e0..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -385,6 +385,25 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_CPVA642 = {
-+      .name                           = "CPVA642",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
-@@ -522,6 +541,7 @@ static const struct board_info __initcon
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_CPVA642,
-       &board_DWVS0,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-4.19/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644 (file)
index e78832e..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -452,6 +452,22 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+      .name                           = "AW4139",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_nb4_ser_r0 = {
-       .name                           = "NB4-SER-r0",
-       .expected_cpu_id                = 0x6358,
-@@ -543,6 +559,7 @@ static const struct board_info __initcon
-       &board_AGPFS0,
-       &board_CPVA642,
-       &board_DWVS0,
-+      &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
- #endif
-@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.19/505-board_spw500v.patch b/target/linux/brcm63xx/patches-4.19/505-board_spw500v.patch
deleted file mode 100644 (file)
index f5ca73d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -324,6 +324,36 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct sprom_fixup __initdata spw500v_fixups[] = {
-+      { .offset = 46, .value = 0x3046 },
-+      { .offset = 47, .value = 0x15a7 },
-+      { .offset = 48, .value = 0xfa89 },
-+      { .offset = 49, .value = 0xfe79 },
-+      { .offset = 57, .value = 0x6a49 },
-+};
-+
-+static struct board_info __initdata board_spw500v = {
-+      .name                           = "SPW500V",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4318,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = spw500v_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -551,6 +581,7 @@ static const struct board_info __initcon
-       &board_96348gw_a,
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-+      &board_spw500v,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-4.19/506-board_gw6200_gw6000.patch
deleted file mode 100644 (file)
index 77948d1..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -217,6 +217,48 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+static struct board_info __initdata board_gw6200 = {
-+      .name                           = "GW6200",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+      .name                           = "GW6000",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
-@@ -574,6 +616,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-       &board_96348gw,
-+      &board_gw6000,
-+      &board_gw6200,
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-+      { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-+      { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-4.19/507-board-MAGIC.patch
deleted file mode 100644 (file)
index 3a88e01..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -396,6 +396,31 @@ static struct board_info __initdata boar
-               .num_board_fixups       = ARRAY_SIZE(spw500v_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+      .name                           = "MAGIC",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              /* it has BP_ENET_EXTERNAL_PHY */
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -626,6 +651,7 @@ static const struct board_info __initcon
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-       &board_spw500v,
-+      &board_96348sv,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/508-board_hw553.patch b/target/linux/brcm63xx/patches-4.19/508-board_hw553.patch
deleted file mode 100644 (file)
index e6e94f7..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -618,6 +618,32 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
-       .num_usbh_ports                 = 2,
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+      .name                           = "HW553",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -663,6 +689,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_HW553,
- #endif
- };
-@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.19/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-4.19/509-board_rta1320_16m.patch
deleted file mode 100644 (file)
index cfe5555..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -112,6 +112,20 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+      .name                           = "RTA1320_16M",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6338 */
- /*
-@@ -660,6 +674,7 @@ static const struct board_info __initcon
-       &board_96338gw,
-       &board_96338w,
-       &board_96338w2_e7t,
-+      &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
-       { .compatible = "brcm,bcm96338w", .data = &board_96338w, },
-+      { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, },
-       { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
diff --git a/target/linux/brcm63xx/patches-4.19/510-board_spw303v.patch b/target/linux/brcm63xx/patches-4.19/510-board_spw303v.patch
deleted file mode 100644 (file)
index 69432c9..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -658,6 +658,20 @@ static struct board_info __initdata boar
-               .pci_dev                        = 1,
-       },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+      .name                   = "96358-502V",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -705,6 +719,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_HW553,
-+      &board_spw303v,
- #endif
- };
-@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
-       { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, },
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-+      { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch b/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch
deleted file mode 100644 (file)
index c77eb00..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -435,6 +435,26 @@ static struct board_info __initdata boar
-       .has_pccard                     = 1,
-       .has_ehci0                      = 1,
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+      .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
- /*
-@@ -707,6 +727,7 @@ static const struct board_info __initcon
-       &board_96348_D4PW,
-       &board_spw500v,
-       &board_96348sv,
-+      &board_V2500V_BB,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
-               val &= MPI_CSBASE_BASE_MASK;
-       }
-       boot_addr = (u8 *)KSEG1ADDR(val);
-+      pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+      /* Do an early check of CFE and then select bank 0 */
-+
-+      if (boot_addr == (u8 *)0xbf800000) {
-+              u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+                      pr_info("V2500V: nvram bank 0\n");
-+                      boot_addr = tmp_boot_addr;
-+              }
-+      }
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -21,6 +21,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_regs.h>
-@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
-                       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-                       val &= MPI_CSBASE_BASE_MASK;
-+                      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+                      /* Loading from CFE always uses Bank 0 */
-+                      if (!strcmp(board_get_name(), "V2500V_BB")) {
-+                              pr_info("V2500V: Start in Bank 0\n");
-+                              val = val + 0x400000; // Select Bank 0 start address
-+                      }
-+
-                       mtd_resources[0].start = val;
-                       mtd_resources[0].end = 0x1FFFFFFF;
-               }
diff --git a/target/linux/brcm63xx/patches-4.19/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-4.19/512-board_BTV2110.patch
deleted file mode 100644 (file)
index 4c14ea4..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -208,6 +208,24 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+      .name                           = "V2110",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -728,6 +746,7 @@ static const struct board_info __initcon
-       &board_spw500v,
-       &board_96348sv,
-       &board_V2500V_BB,
-+      &board_V2110,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+      { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/brcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/brcm63xx/patches-4.19/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch
deleted file mode 100644 (file)
index 53ea56b..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:55:52 +0100
-Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support
-
----
- arch/mips/bcm63xx/boards/Kconfig         |    6 +
- arch/mips/bcm63xx/boards/Makefile        |    1 +
- arch/mips/bcm63xx/boards/board_common.c  |    2 +-
- arch/mips/bcm63xx/boards/board_common.h  |    6 +
- arch/mips/bcm63xx/boards/board_livebox.c |  215 ++++++++++++++++++++++++++++++
- 5 files changed, 229 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -12,4 +12,10 @@ config BOARD_BCM963XX
-       select BCMA
-       default y
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+        Inventel Livebox boards using the RedBoot bootloader.
-+
- endmenu
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,2 +1,3 @@
- obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -54,7 +54,7 @@ void __init board_prom_init(void)
-       if (fw_arg3 == CFE_EPTSEAL)
-               board_bcm963xx_init();
-       else
--              panic("unsupported bootloader detected");
-+              board_livebox_init();
- }
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -24,4 +24,10 @@ static inline void board_of_device_prese
- }
- #endif
-+#if defined(CONFIG_BOARD_LIVEBOX)
-+void board_livebox_init(void);
-+#else
-+static inline void board_livebox_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/input.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <board_bcm963xx.h>
-+
-+#include "board_common.h"
-+
-+#define PFX   "board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+      .name                           = "Livebox-blue-5g",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+                .has_phy              = 1,
-+                .phy_id               = 31,
-+      },
-+
-+      .ephy_reset_gpio                = 6,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox_blue5g
-+#endif
-+};
-+
-+static struct of_device_id const livebox_boards_dt[] = {
-+      { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, },
-+      { }
-+};
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int livebox_get_mac_address(u8 *mac)
-+{
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
-+#define LIVEBOX_BOOT_ADDR             0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9           0x90
-+
-+void __init board_livebox_init(void)
-+{
-+      u32 val;
-+      u8 hw_version;
-+      const struct board_info *board;
-+      const struct of_device_id *board_match;
-+
-+      /* find board by compat */
-+      board_match = bcm63xx_match_board(livebox_boards_dt);
-+      if (board_match) {
-+              board = board_match->data;
-+      } else {
-+              /* Get hardware version */
-+              val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+              val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+              bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+              hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+              hw_version &= LIVEBOX_GPIO_DETECT_MASK;
-+
-+              switch (hw_version) {
-+              case LIVEBOX_HW_BLUE5G_9:
-+                      printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              default:
-+                      printk(KERN_INFO PFX "Unknown livebox version: %02x\n",
-+                             hw_version);
-+                      /* use default livebox configuration */
-+                      board = bcm963xx_boards[0];
-+                      break;
-+              }
-+      }
-+
-+      /* use default livebox configuration */
-+      board_early_setup(board, livebox_get_mac_address);
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      if (val != LIVEBOX_BOOT_ADDR) {
-+              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+                      val, LIVEBOX_BOOT_ADDR);
-+              bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff);
-+      }
-+}
diff --git a/target/linux/brcm63xx/patches-4.19/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-4.19/514-board_ct536_ct5621.patch
deleted file mode 100644 (file)
index acb533d..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -226,6 +226,33 @@ static struct board_info __initdata boar
- };
-+static struct board_info __initdata board_ct536_ct5621 = {
-+      .name                           = "CT536_CT5621",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 0,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -747,6 +774,7 @@ static const struct board_info __initcon
-       &board_96348sv,
-       &board_V2500V_BB,
-       &board_V2110,
-+      &board_ct536_ct5621,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-+      { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
diff --git a/target/linux/brcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-4.19/515-board_DWV-S0_fixes.patch
deleted file mode 100644 (file)
index 9ccb29b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -626,6 +626,7 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-4.19/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-4.19/516-board_96348A-122.patch
deleted file mode 100644 (file)
index a6de00d..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -253,6 +253,30 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348A_122 = {
-+      .name                           = "96348A-122",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -776,6 +800,7 @@ static const struct board_info __initcon
-       &board_V2500V_BB,
-       &board_V2110,
-       &board_ct536_ct5621,
-+      &board_96348A_122,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "bt,voyager-2110", .data = &board_V2110, },
-       { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
-       { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, },
-+      { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
-       { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
-       { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
diff --git a/target/linux/brcm63xx/patches-4.19/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-4.19/519_board_CPVA502plus.patch
deleted file mode 100644 (file)
index 25e7f9f..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -225,6 +225,33 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_CPVA502plus = {
-+      .name                           = "CPVA502+",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+      },
-+
-+      .ephy_reset_gpio                = 4,
-+      .ephy_reset_gpio_flags          = GPIO_ACTIVE_LOW,
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
- static struct board_info __initdata board_ct536_ct5621 = {
-       .name                           = "CT536_CT5621",
-@@ -801,6 +828,7 @@ static const struct board_info __initcon
-       &board_V2110,
-       &board_ct536_ct5621,
-       &board_96348A_122,
-+      &board_CPVA502plus,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
-+      { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
-       { .compatible = "telsey,magic", .data = &board_96348sv, },
-       { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
-       { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },
diff --git a/target/linux/brcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-4.19/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644 (file)
index 17087b3..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -792,6 +792,58 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+      .name                           = "96368MVWG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port1",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0x12,
-+                              .name   = "port0",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 0x11,
-+                              .name   = "port3",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6368 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -843,6 +895,10 @@ static const struct board_info __initcon
-       &board_HW553,
-       &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_96368mvwg,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
- #endif
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -81,12 +81,25 @@ void __init board_early_setup(const stru
-               bcm63xx_pci_enabled = 1;
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G2_PCI;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCI_REQ1 |
-+                              GPIO_MODE_6368_PCI_GNT1 |
-+                              GPIO_MODE_6368_PCI_INTB |
-+                              GPIO_MODE_6368_PCI_REQ0 |
-+                              GPIO_MODE_6368_PCI_GNT0;
-       }
- #endif
-       if (board.has_pccard) {
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+                              GPIO_MODE_6368_PCMCIA_CD2 |
-+                              GPIO_MODE_6368_PCMCIA_VS1 |
-+                              GPIO_MODE_6368_PCMCIA_VS2;
-       }
-       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-4.19/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644 (file)
index 03bda96..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -841,6 +841,45 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+      .name                           = "96368MVNgr",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -898,6 +937,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-+      &board_96368mvngr,
- #endif
- };
-@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-4.19/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644 (file)
index e482b20..0000000
+++ /dev/null
@@ -1,45 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -64,6 +64,33 @@ static struct board_info __initdata boar
-               .use_fullspeed          = 0,
-               .port_no                = 0,
-       },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
- };
- #endif /* CONFIG_BCM63XX_CPU_6328 */
diff --git a/target/linux/brcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-4.19/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644 (file)
index 522d999..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -92,6 +92,40 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+      .name                           = "963281TAN",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -918,6 +952,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-4.19/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644 (file)
index b91fff0..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -126,6 +126,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+      .name                           = "AW4339U",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor         = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset = 0x7d1000,
-+                      .slot           = 0,
-+                      .led_pin        = -1,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 1",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -953,6 +998,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.19/525-board_96348w3.patch b/target/linux/brcm63xx/patches-4.19/525-board_96348w3.patch
deleted file mode 100644 (file)
index 3a27db8..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -568,6 +568,24 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+      .name                           = "96348W3",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+};
-+
- static struct board_info __initdata board_96348_D4PW = {
-       .name                           = "D-4P-W",
-       .expected_cpu_id                = 0x6348,
-@@ -1028,6 +1046,7 @@ static const struct board_info __initcon
-       &board_ct536_ct5621,
-       &board_96348A_122,
-       &board_CPVA502plus,
-+      &board_96348W3,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
-       { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-+      { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
diff --git a/target/linux/brcm63xx/patches-4.19/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-4.19/526-board_CT6373-1.patch
deleted file mode 100644 (file)
index 0cfcc17..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -874,6 +874,30 @@ static struct board_info __initdata boar
-       .num_usbh_ports                 = 2,
- };
-+static struct board_info __initdata board_ct6373_1 = {
-+      .name                           = "CT6373-1",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1058,6 +1082,7 @@ static const struct board_info __initcon
-       &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-+      &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
- #endif
-@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-       { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, },
-       { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },
-+      { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
diff --git a/target/linux/brcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-4.19/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index 45e8717..0000000
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -937,6 +937,33 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+};
- #endif /* CONFIG_BCM63XX_CPU_6358 */
- /*
-@@ -1085,6 +1112,7 @@ static const struct board_info __initcon
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-+      { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.19/528-board_nb6.patch b/target/linux/brcm63xx/patches-4.19/528-board_nb6.patch
deleted file mode 100644 (file)
index b4de7cb..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -966,6 +966,32 @@ static struct board_info __initdata boar
- };
- #endif /* CONFIG_BCM63XX_CPU_6358 */
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct board_info __initdata board_nb6 = {
-+      .name                           = "NB6",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name   = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6362 */
-+
- /*
-  * known 6368 boards
-  */
-@@ -1115,6 +1141,10 @@ static const struct board_info __initcon
-       &board_DVAG3810BN,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/brcm63xx/patches-4.19/529-board_fast2604.patch b/target/linux/brcm63xx/patches-4.19/529-board_fast2604.patch
deleted file mode 100644 (file)
index 9e42c40..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -501,6 +501,22 @@ static struct board_info __initdata boar
-       .has_ehci0                      = 1,
- };
-+static struct board_info __initdata board_FAST2604 = {
-+      .name                                           = "F@ST2604",
-+      .expected_cpu_id                        = 0x6348,
-+
-+      .has_pci                                        = 1,
-+      .has_ohci0                                      = 1,
-+
-+      .has_enet1                                      = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -1112,6 +1128,7 @@ static const struct board_info __initcon
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-+      &board_FAST2604,
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, },
-       { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, },
-       { .compatible = "sagem,fast-2404", .data = &board_FAST2404, },
-+      { .compatible = "sagem,fast-2604", .data = &board_FAST2604, },
-       { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
-       { .compatible = "tecom,gw6000", .data = &board_gw6000, },
-       { .compatible = "tecom,gw6200", .data = &board_gw6200, },
diff --git a/target/linux/brcm63xx/patches-4.19/530-board_A4001N1.patch b/target/linux/brcm63xx/patches-4.19/530-board_A4001N1.patch
deleted file mode 100644 (file)
index 0cecd9c..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -127,6 +127,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N1 = {
-+      .name                                   = "963281T_TEF",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
-       .name                           = "AW4339U",
-       .expected_cpu_id                = 0x6328,
-@@ -1109,6 +1152,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_A4001N1,
-       &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
diff --git a/target/linux/brcm63xx/patches-4.19/531-board_AR-5387un.patch b/target/linux/brcm63xx/patches-4.19/531-board_AR-5387un.patch
deleted file mode 100644 (file)
index f2af2c5..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,78 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5387un_fixups[] = {
-+      { .offset = 2, .value = 0x05bb },
-+      { .offset = 65, .value = 0x1204 },
-+      { .offset = 78, .value = 0x0303 },
-+      { .offset = 79, .value = 0x0202 },
-+      { .offset = 80, .value = 0xff02 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xff11 },
-+      { .offset = 98, .value = 0x1567 },
-+      { .offset = 99, .value = 0xfb24 },
-+      { .offset = 100, .value = 0x3e3c },
-+      { .offset = 101, .value = 0x4038 },
-+      { .offset = 102, .value = 0xfe7f },
-+      { .offset = 103, .value = 0x1279 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xff03 },
-+      { .offset = 114, .value = 0x154c },
-+      { .offset = 115, .value = 0xfb27 },
-+      { .offset = 116, .value = 0x3e3c },
-+      { .offset = 117, .value = 0x4038 },
-+      { .offset = 118, .value = 0xfe87 },
-+      { .offset = 119, .value = 0x1233 },
-+      { .offset = 203, .value = 0x2226 },
-+};
-+
-+static struct board_info __initdata board_AR5387un = {
-+      .name                                   = "96328A-1441N1",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5387un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5387un_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
-       .name                           = "963281TAN",
-       .expected_cpu_id                = 0x6328,
-@@ -1151,6 +1223,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.19/532-board_AR-5381u.patch b/target/linux/brcm63xx/patches-4.19/532-board_AR-5381u.patch
deleted file mode 100644 (file)
index dc8efed..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -93,6 +93,60 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5381u_fixups[] = {
-+      { .offset = 97, .value = 0xfee5 },
-+      { .offset = 98, .value = 0x157c },
-+      { .offset = 99, .value = 0xfae7 },
-+      { .offset = 113, .value = 0xfefa },
-+      { .offset = 114, .value = 0x15d6 },
-+      { .offset = 115, .value = 0xfaf8 },
-+};
-+
-+static struct board_info __initdata board_AR5381u = {
-+      .name                                   = "96328A-1241N",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5381u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5381u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5387un_fixups[] = {
-       { .offset = 2, .value = 0x05bb },
-       { .offset = 65, .value = 0x1204 },
-@@ -1223,6 +1277,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-       &board_A4001N1,
-@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
-+      { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-4.19/533-board_rta770bw.patch
deleted file mode 100644 (file)
index d56df55..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -411,6 +411,20 @@ static struct board_info __initdata boar
-       .name                           = "96345GW2",
-       .expected_cpu_id                = 0x6345,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+      .name                           = "RTA770BW",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1291,6 +1305,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-+      &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-+      { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.19/534-board_hw556.patch b/target/linux/brcm63xx/patches-4.19/534-board_hw556.patch
deleted file mode 100644 (file)
index cf55255..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,7 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
-+#include <linux/pci_ids.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW556_C = {
-+      .name                                   = "HW556_C",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xeffe00,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_A = {
-+      .name                                   = "HW556_A",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xf7e000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+static struct board_info __initdata board_HW556_B = {
-+      .name                                   = "HW556_B",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 2,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xefe000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+                      .led_active_high        = 1,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
-       .name                   = "96358-502V",
-@@ -1341,6 +1428,9 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-       &board_HW553,
-+      &board_HW556_A,
-+      &board_HW556_B,
-+      &board_HW556_C,
-       &board_spw303v,
-       &board_DVAG3810BN,
- #endif
-@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-+      { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-+      { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
-+      { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, },
-       { .compatible = "pirelli,a226g", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-       { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, },
diff --git a/target/linux/brcm63xx/patches-4.19/535-board_rta770w.patch b/target/linux/brcm63xx/patches-4.19/535-board_rta770w.patch
deleted file mode 100644 (file)
index c78e59e..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -426,6 +426,25 @@ static struct board_info __initdata boar
-               .force_duplex_full      = 1,
-       },
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+      .name                           = "RTA770W",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- /*
-@@ -1393,6 +1412,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-       &board_rta770bw,
-+      &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
-       { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
-       { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
-+      { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.19/536-board_fast2704.patch b/target/linux/brcm63xx/patches-4.19/536-board_fast2704.patch
deleted file mode 100644 (file)
index 358e974..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Marcin Jurkowski <marcin1j@gmail.com>
-Date: Thu, 31 Oct 2013 22:33:10 +0000
-Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
- router
-
-This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
-router.
-It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
-modem equipped with 64 MiB RAM and 8 MiB flash.
-
-Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -341,6 +341,43 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704V2 = {
-+      .name                           = "F@ST2704V2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .has_usbd                       = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -1402,6 +1439,7 @@ static const struct board_info __initcon
-       &board_963281TAN,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-+      &board_FAST2704V2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.19/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-4.19/537-board_fast2504n.patch
deleted file mode 100644 (file)
index b74274b..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Max Staudt <openwrt.max@enpas.org>
-Date: Wed, 15 Jan 2014 18:51:13 +0000
-Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
-
-Signed-off-by: Max Staudt <openwrt.max@enpas.org>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_fast2504n = {
-+      .name                           = "F@ST2504n",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6362 */
- /*
-@@ -1495,6 +1530,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6362
-       &board_nb6,
-+      &board_fast2504n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-+      { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-4.19/555-board_96318ref.patch b/target/linux/brcm63xx/patches-4.19/555-board_96318ref.patch
deleted file mode 100644 (file)
index c9c532d..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -50,6 +50,55 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_3368 */
- /*
-+ * known 6318 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+static struct board_info __initdata board_96318ref = {
-+      .name                           = "96318REF",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_6318 */
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -1467,6 +1516,9 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_3368
-       &board_cvg834g,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      &board_96318ref,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_AR5381u,
-@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_3368
-       { .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+      { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
diff --git a/target/linux/brcm63xx/patches-4.19/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-4.19/556-board_96318ref_p300.patch
deleted file mode 100644 (file)
index f4ff4fd..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -96,6 +96,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96318ref_p300 = {
-+      .name                           = "96318REF_P300",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1518,6 +1562,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-+      &board_96318ref_p300,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-+      { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
diff --git a/target/linux/brcm63xx/patches-4.19/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-4.19/557-board_bcm963269bhr.patch
deleted file mode 100644 (file)
index d5af2f0..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-+ * known 63268/63269 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963269bhr = {
-+      .name                           = "963269BHR",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+};
-+#endif /* CONFIG_BCM63XX_CPU_63268 */
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -1634,6 +1678,9 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963269bhr,
-+#endif
- };
- static struct of_device_id const bcm963xx_boards_dt[] = {
-@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.19/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-4.19/558-board_AR1004G.patch
deleted file mode 100644 (file)
index 3cf41b0..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From: "mexit@o2.pl" <mexit@o2.pl>
-Date: Sun, 24 Nov 2013 21:33:38 +0000
-Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
-
-Support for Asmax AR 1004g router
-
-Signed-off-by: Adrian Feliks <mexit@o2.pl>
----
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -647,6 +647,21 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_96348gw_10_AR1004G = {
-+      .name                           = "AR1004G",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+};
-+
- /* BT Voyager 2110 */
- static struct board_info __initdata board_V2110 = {
-@@ -1649,6 +1664,7 @@ static const struct board_info __initcon
-       &board_96348A_122,
-       &board_CPVA502plus,
-       &board_96348W3,
-+      &board_96348gw_10_AR1004G,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-+      { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, },
-       { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-       { .compatible = "brcm,bcm96348r", .data = &board_96348r, },
-       { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
diff --git a/target/linux/brcm63xx/patches-4.19/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-4.19/559-board_vw6339gu.patch
deleted file mode 100644 (file)
index 355bdb2..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_vw6339gu = {
-+      .name                           = "VW6339GU",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN2",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN4",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 7,
-+                              .name   = "WAN",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -1696,6 +1741,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963269bhr,
-+      &board_vw6339gu,
- #endif
- };
-@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-+      { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.19/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-4.19/560-board_963268gu_p300.patch
deleted file mode 100644 (file)
index b8a2af4..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar
-  * known 63268/63269 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_63268
-+static struct board_info __initdata board_963268bu_p300 = {
-+      .name                           = "963268BU_P300",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .has_usbd                       = 1,
-+
-+      .usbd = {
-+              .use_fullspeed          = 0,
-+              .port_no                = 0,
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 17,
-+                              .name   = "FE1",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "GbE2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0,
-+                              .name   = "GbE3",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "GbE1",
-+                      },
-+
-+                      [6] = {
-+                              .used   = 1,
-+                              .phy_id = 24,
-+                              .name   = "GbE4",
-+                      },
-+
-+                      [7] = {
-+                              .used   = 1,
-+                              .phy_id = 25,
-+                              .name   = "GbE5",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963269bhr = {
-       .name                           = "963269BHR",
-       .expected_cpu_id                = 0x63268,
-@@ -1740,6 +1798,7 @@ static const struct board_info __initcon
-       &board_96368mvngr,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
- #endif
-@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-+      { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-4.19/561-board_WAP-5813n.patch
deleted file mode 100644 (file)
index 8b8b1ed..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -13,6 +13,8 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/pci_ids.h>
-+#include <linux/platform_data/b53.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct sprom_fixup __initdata wap5813n_fixups[] = {
-+      { .offset = 97, .value = 0xfeed },
-+      { .offset = 98, .value = 0x15d1 },
-+      { .offset = 99, .value = 0xfb0d },
-+      { .offset = 113, .value = 0xfef7 },
-+      { .offset = 114, .value = 0x15f7 },
-+      { .offset = 115, .value = 0xfb1a },
-+};
-+
-+static struct board_info __initdata board_WAP5813n = {
-+      .name                           = "96369R-1231N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = wap5813n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6368 */
- /*
-@@ -1796,6 +1839,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       &board_963268bu_p300,
-@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-4.19/562-board_VR-3025u.patch b/target/linux/brcm63xx/patches-4.19/562-board_VR-3025u.patch
deleted file mode 100644 (file)
index 36014ea..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct sprom_fixup __initdata vr3025u_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025u = {
-+      .name                                   = "96368M-1541N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1839,6 +1892,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_VR3025u,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6368
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-+      { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/563-board_VR-3025un.patch b/target/linux/brcm63xx/patches-4.19/563-board_VR-3025un.patch
deleted file mode 100644 (file)
index a34b7a1..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3025un_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3025un = {
-+      .name                                   = "96368M-1341N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3025un_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -1893,6 +1946,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_VR3025u,
-+      &board_VR3025un,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-+      { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch b/target/linux/brcm63xx/patches-4.19/564-board_P870HW-51a_v2.patch
deleted file mode 100644 (file)
index 9e06802..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3
-       { .offset = 115, .value = 0xfad9 },
- };
-+static struct board_info __initdata board_P870HW51A_V2 = {
-+      .name                           = "P870HW-51a_v2",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -1945,6 +1987,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_WAP5813n,
-@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-4.19/565-board_hw520.patch b/target/linux/brcm63xx/patches-4.19/565-board_hw520.patch
deleted file mode 100644 (file)
index 517df7d..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW520 = {
-+      .name                           = "HW6358GW_B",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM4318,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -1971,6 +2001,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-       &board_HW556_B,
-@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
-       { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
-       { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, },
-+      { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, },
-       { .compatible = "huawei,echolife-hg553", .data = &board_HW553, },
-       { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, },
-       { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, },
diff --git a/target/linux/brcm63xx/patches-4.19/566-board_A4001N.patch b/target/linux/brcm63xx/patches-4.19/566-board_A4001N.patch
deleted file mode 100644 (file)
index 2dc61d5..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -349,6 +349,49 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_A4001N = {
-+      .name                           = "96328dg2x2",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43225,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- static struct board_info __initdata board_A4001N1 = {
-       .name                                   = "963281T_TEF",
-       .expected_cpu_id                        = 0x6328,
-@@ -1952,6 +1995,7 @@ static const struct board_info __initcon
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-+      &board_A4001N,
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-+      { .compatible = "adb,a4001n", .data = &board_A4001N, },
-       { .compatible = "adb,a4001n1", .data = &board_A4001N1, },
-       { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
-       { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
diff --git a/target/linux/brcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch b/target/linux/brcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch
deleted file mode 100644 (file)
index b7e155d..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -142,6 +142,74 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe9d },
-+      { .offset = 98, .value = 0x1854 },
-+      { .offset = 99, .value = 0xfa59 },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfe79 },
-+      { .offset = 114, .value = 0x17f5 },
-+      { .offset = 115, .value = 0xfa47 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 162, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 170, .value = 0x2222 },
-+      { .offset = 171, .value = 0x5555 },
-+      { .offset = 172, .value = 0x5555 },
-+      { .offset = 173, .value = 0x4444 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x5555 },
-+      { .offset = 176, .value = 0x5555 },
-+};
-+
-+static struct board_info __initdata board_dsl_2751b_d1 = {
-+      .name                           = "AW5200B",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = dsl2751b_e1_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_dsl_2751b_d1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch b/target/linux/brcm63xx/patches-4.19/568-board_DGND3700v1_3800B.patch
deleted file mode 100644 (file)
index 29263bc..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar
-       .has_ehci0 = 1,
- };
-+static struct board_info __initdata board_DGND3700v1_3800B = {
-+      .name                           = "DGND3700v1_3800B",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2131,6 +2155,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-+      &board_DGND3700v1_3800B,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/569-board_homehub2a.patch b/target/linux/brcm63xx/patches-4.19/569-board_homehub2a.patch
deleted file mode 100644 (file)
index 9909994..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_homehub2a = {
-+      .name                           = "HOMEHUB2A",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+};
-+
- static struct board_info __initdata board_HW520 = {
-       .name                           = "HW6358GW_B",
-       .expected_cpu_id                = 0x6358,
-@@ -2138,6 +2163,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r0,
-       &board_nb4_fxc_r1,
-       &board_ct6373_1,
-+      &board_homehub2a,
-       &board_HW520,
-       &board_HW553,
-       &board_HW556_A,
-@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, },
-       { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, },
-       { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
-+      { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
-       { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, },
diff --git a/target/linux/brcm63xx/patches-4.19/570-board_HG655b.patch b/target/linux/brcm63xx/patches-4.19/570-board_HG655b.patch
deleted file mode 100644 (file)
index 7b4d1fc..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG655b = {
-+      .name                           = "HW65x",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0x7c0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2182,6 +2228,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/571-board_fast2704n.patch b/target/linux/brcm63xx/patches-4.19/571-board_fast2704n.patch
deleted file mode 100644 (file)
index fb84d8d..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -210,6 +210,45 @@ static struct board_info __initdata boar
-               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
-       },
- };
-+
-+static struct board_info __initdata board_FAST2704N = {
-+      .name                           = "F@ST2704N",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6318 */
- /*
-@@ -2153,6 +2192,7 @@ static const struct board_info __initcon
-       &board_96318ref,
-       &board_96318ref_p300,
-       &board_dsl_2751b_d1,
-+      &board_FAST2704N,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-+      { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       { .compatible = "adb,a4001n", .data = &board_A4001N, },
diff --git a/target/linux/brcm63xx/patches-4.19/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-4.19/572-board_VR-3026e.patch
deleted file mode 100644 (file)
index dec8adf..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vr3026e_fixups[] = {
-+      { .offset = 97, .value = 0xfeb3 },
-+      { .offset = 98, .value = 0x1618 },
-+      { .offset = 99, .value = 0xfab0 },
-+      { .offset = 113, .value = 0xfed1 },
-+      { .offset = 114, .value = 0x1609 },
-+      { .offset = 115, .value = 0xfad9 },
-+};
-+
-+static struct board_info __initdata board_VR3026e = {
-+      .name                                   = "96368MT-1341N1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_enetsw                             = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vr3026e_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vr3026e_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2272,6 +2325,7 @@ static const struct board_info __initcon
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-       &board_VR3025un,
-+      &board_VR3026e,
-       &board_WAP5813n,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
-@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-+      { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/brcm63xx/patches-4.19/573-board_R5010UNv2.patch b/target/linux/brcm63xx/patches-4.19/573-board_R5010UNv2.patch
deleted file mode 100644 (file)
index ab3e6fe..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -623,6 +623,50 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_R5010UNV2 = {
-+      .name                                   = "96328ang",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+      },
-+};
-+
- #endif /* CONFIG_BCM63XX_CPU_6328 */
- /*
-@@ -2256,6 +2300,7 @@ static const struct board_info __initcon
-       &board_A4001N1,
-       &board_dsl_274xb_f1,
-       &board_FAST2704V2,
-+      &board_R5010UNV2,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
-       { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-+      { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-4.19/574-board_HG622.patch b/target/linux/brcm63xx/patches-4.19/574-board_HG622.patch
deleted file mode 100644 (file)
index 3a14751..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HG622 = {
-+      .name                           = "96368MVWG_hg622",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xfa0000,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "port1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "port2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "port3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "port4",
-+                      },
-+              },
-+      },
-+};
-+
- static struct sprom_fixup __initdata vr3025u_fixups[] = {
-       { .offset = 97, .value = 0xfeb3 },
-       { .offset = 98, .value = 0x1618 },
-@@ -2366,6 +2412,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-       &board_VR3025u,
-@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
-       { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
-       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
-+      { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
diff --git a/target/linux/brcm63xx/patches-4.19/575-board_EVG2000.patch b/target/linux/brcm63xx/patches-4.19/575-board_EVG2000.patch
deleted file mode 100644 (file)
index 1619376..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata EVG2000_fixups[] = {
-+  { .offset = 219, .value = 0xec08 },
-+};
-+
-+static struct board_info __initdata board_EVG2000 = {
-+      .name                           = "96369PVG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name = "RGMII",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .type                   = SPROM_BCM4322,
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+              .board_fixups           = EVG2000_fixups,
-+              .num_board_fixups       = ARRAY_SIZE(EVG2000_fixups),
-+      },
-+};
-+
- static struct board_info __initdata board_HG655b = {
-       .name                           = "HW65x",
-       .expected_cpu_id                = 0x6368,
-@@ -2412,6 +2448,7 @@ static const struct board_info __initcon
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-+      &board_EVG2000,
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg622", .data = &board_HG622, },
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-+      { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/576-board_AV4202N.patch b/target/linux/brcm63xx/patches-4.19/576-board_AV4202N.patch
deleted file mode 100644 (file)
index c61fcdd..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar
-  * known 6368 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_AV4202N = {
-+      .name                           = "96368_Swiss_S1",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+      .use_fallback_sprom     = 1,
-+      .fallback_sprom = {
-+              .pci_bus                = 0,
-+              .pci_dev                = 1,
-+      },
-+
-+};
-+
- static struct board_info __initdata board_96368mvwg = {
-       .name                           = "96368MVWG",
-       .expected_cpu_id                = 0x6368,
-@@ -2445,6 +2490,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_AV4202N,
-       &board_96368mvwg,
-       &board_96368mvngr,
-       &board_DGND3700v1_3800B,
-@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
-       { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
diff --git a/target/linux/brcm63xx/patches-4.19/577-board_VH4032N.patch b/target/linux/brcm63xx/patches-4.19/577-board_VH4032N.patch
deleted file mode 100644 (file)
index baed99c..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata vh4032n_fixups[] = {
-+      { .offset = 2, .value = 0x04d2 },
-+      { .offset = 4, .value = 0x4350 },
-+      { .offset = 65, .value = 0x1300 },
-+      { .offset = 68, .value = 0x0402 },
-+      { .offset = 70, .value = 0x0090 },
-+      { .offset = 71, .value = 0x4c19 },
-+      { .offset = 72, .value = 0x2345 },
-+      { .offset = 87, .value = 0x0315 },
-+      { .offset = 88, .value = 0x0315 },
-+      { .offset = 96, .value = 0x2048 },
-+      { .offset = 97, .value = 0xfed7 },
-+      { .offset = 98, .value = 0x15a6 },
-+      { .offset = 99, .value = 0xfaee },
-+      { .offset = 100, .value = 0x3e3a },
-+      { .offset = 101, .value = 0x3a36 },
-+      { .offset = 102, .value = 0xff7f },
-+      { .offset = 103, .value = 0x11b9 },
-+      { .offset = 104, .value = 0xfc53 },
-+      { .offset = 105, .value = 0xffe6 },
-+      { .offset = 106, .value = 0xfdd2 },
-+      { .offset = 107, .value = 0xfe49 },
-+      { .offset = 108, .value = 0xff6a },
-+      { .offset = 109, .value = 0x136e },
-+      { .offset = 110, .value = 0xfbed },
-+      { .offset = 111, .value = 0x0000 },
-+      { .offset = 112, .value = 0x2048 },
-+      { .offset = 113, .value = 0xfee2 },
-+      { .offset = 114, .value = 0x15e5 },
-+      { .offset = 115, .value = 0xfaed },
-+      { .offset = 116, .value = 0x3e3a },
-+      { .offset = 117, .value = 0x3a36 },
-+      { .offset = 118, .value = 0xffc8 },
-+      { .offset = 119, .value = 0x12b8 },
-+      { .offset = 120, .value = 0xfca1 },
-+      { .offset = 121, .value = 0xff9b },
-+      { .offset = 122, .value = 0x122a },
-+      { .offset = 123, .value = 0xfcc8 },
-+      { .offset = 124, .value = 0xff95 },
-+      { .offset = 125, .value = 0x146b },
-+      { .offset = 126, .value = 0xfbba },
-+      { .offset = 127, .value = 0x0000 },
-+      { .offset = 161, .value = 0x0000 },
-+      { .offset = 162, .value = 0x0000 },
-+      { .offset = 169, .value = 0x0000 },
-+      { .offset = 170, .value = 0x0000 },
-+      { .offset = 171, .value = 0x0000 },
-+      { .offset = 172, .value = 0x0000 },
-+      { .offset = 173, .value = 0x0000 },
-+      { .offset = 174, .value = 0x0000 },
-+      { .offset = 175, .value = 0x0000 },
-+      { .offset = 176, .value = 0x0000 },
-+      { .offset = 219, .value = 0x1108 },
-+};
-+
-+static struct board_info __initdata board_VH4032N = {
-+      .name                           = "VH4032N",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43222,
-+              .pci_bus                        = 0,
-+              .pci_dev                        = 1,
-+              .board_fixups                   = vh4032n_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(vh4032n_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata wap5813n_fixups[] = {
-       { .offset = 97, .value = 0xfeed },
-       { .offset = 98, .value = 0x15d1 },
-@@ -2498,6 +2598,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-       &board_VR3026e,
-@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, },
-       { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, },
-       { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
-+      { .compatible = "observa,vh4032n", .data = &board_VH4032N, },
-       { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_63268
diff --git a/target/linux/brcm63xx/patches-4.19/578-board_R1000H.patch b/target/linux/brcm63xx/patches-4.19/578-board_R1000H.patch
deleted file mode 100644 (file)
index f2b2e1e..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_R1000H = {
-+      .name                           = "R1000H",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+      .enetsw = {
-+              .used_ports = {
-+                      [5] = {
-+                              .used  = 1,
-+                              .phy_id  = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name  = "RGMII",
-+                      },
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_VR3025u = {
-       .name                                   = "96368M-1541N",
-       .expected_cpu_id                = 0x6368,
-@@ -2598,6 +2621,7 @@ static const struct board_info __initcon
-       &board_HG622,
-       &board_HG655b,
-       &board_P870HW51A_V2,
-+      &board_R1000H,
-       &board_VH4032N,
-       &board_VR3025u,
-       &board_VR3025un,
-@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-+      { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
-       { .compatible = "adb,av4202n", .data = &board_AV4202N, },
-       { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
-       { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
diff --git a/target/linux/brcm63xx/patches-4.19/579-board_AR-5315u.patch b/target/linux/brcm63xx/patches-4.19/579-board_AR-5315u.patch
deleted file mode 100644 (file)
index 0393d46..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -143,6 +143,67 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ar5315u_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1255 },
-+      { .offset = 97, .value = 0xfe55 },
-+      { .offset = 98, .value = 0x171d },
-+      { .offset = 99, .value = 0xfa42 },
-+      { .offset = 113, .value = 0xfeb7 },
-+      { .offset = 114, .value = 0x18cd },
-+      { .offset = 115, .value = 0xfa4f },
-+      { .offset = 162, .value = 0x6444 },
-+      { .offset = 170, .value = 0x6444 },
-+      { .offset = 172, .value = 0x6444 },
-+};
-+
-+static struct board_info __initdata board_AR5315u = {
-+      .name                           = "96318A-1441N1",
-+      .expected_cpu_id                = 0x6318,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+      .num_usbh_ports                 = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "LAN4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ar5315u_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
-       { .offset = 96, .value = 0x2046 },
-       { .offset = 97, .value = 0xfe9d },
-@@ -2538,6 +2599,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6318
-       &board_96318ref,
-       &board_96318ref_p300,
-+      &board_AR5315u,
-       &board_dsl_2751b_d1,
-       &board_FAST2704N,
- #endif
-@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6318
-       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
-       { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
-+      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
-       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
-       { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, },
- #endif
diff --git a/target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch b/target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch
deleted file mode 100644 (file)
index a48ecf9..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -357,6 +357,73 @@ static struct board_info __initdata boar
-       },
- };
-+static struct sprom_fixup __initdata ad1018_fixups[] = {
-+      { .offset = 6, .value = 0x1c00 },
-+      { .offset = 65, .value = 0x1256 },
-+      { .offset = 96, .value = 0x2046 },
-+      { .offset = 97, .value = 0xfe69 },
-+      { .offset = 98, .value = 0x1726 },
-+      { .offset = 99, .value = 0xfa5c },
-+      { .offset = 112, .value = 0x2046 },
-+      { .offset = 113, .value = 0xfea8 },
-+      { .offset = 114, .value = 0x1978 },
-+      { .offset = 115, .value = 0xfa26 },
-+      { .offset = 161, .value = 0x2222 },
-+      { .offset = 169, .value = 0x2222 },
-+      { .offset = 171, .value = 0x2222 },
-+      { .offset = 173, .value = 0x2222 },
-+      { .offset = 174, .value = 0x4444 },
-+      { .offset = 175, .value = 0x2222 },
-+      { .offset = 176, .value = 0x4444 },
-+};
-+
-+static struct board_info __initdata board_AD1018 = {
-+      .name                                   = "96328avngr",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_pci                                = 1,
-+      .use_fallback_sprom                     = 1,
-+
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .num_usbh_ports                         = 1,
-+
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "FIBRE",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "LAN3",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "LAN2",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "LAN1",
-+                      },
-+              },
-+      },
-+
-+      .fallback_sprom = {
-+              .type                           = SPROM_BCM43217,
-+              .pci_bus                        = 1,
-+              .pci_dev                        = 0,
-+              .board_fixups                   = ad1018_fixups,
-+              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
-+      },
-+};
-+
- static struct sprom_fixup __initdata ar5381u_fixups[] = {
-       { .offset = 97, .value = 0xfee5 },
-       { .offset = 98, .value = 0x157c },
-@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_AD1018,
-       &board_AR5381u,
-       &board_AR5387un,
-       &board_963281TAN,
-@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
-       { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
-       { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
-+      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },
diff --git a/target/linux/brcm63xx/patches-4.19/598-board_sr102.patch b/target/linux/brcm63xx/patches-4.19/598-board_sr102.patch
deleted file mode 100644 (file)
index c8db6c1..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_BSKYB_63168 = {
-+      .name                           = "BSKYB_63168",
-+      .expected_cpu_id                = 0x63268,
-+
-+      .has_pci                        = 1,
-+      .use_fallback_sprom             = 0,
-+
-+      .has_ehci0                      = 1,
-+      .has_ohci0                      = 1,
-+      .num_usbh_ports                 = 2,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+
-+              },
-+      },
-+};
- #endif /* CONFIG_BCM63XX_CPU_63268 */
- /*
-@@ -2762,6 +2805,7 @@ static const struct board_info __initcon
-       &board_963268bu_p300,
-       &board_963269bhr,
-       &board_vw6339gu,
-+      &board_BSKYB_63168,
- #endif
- };
-@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x
-       { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
-       { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
-       { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
-+      { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
- #endif
- #endif /* CONFIG_OF */
-       { },
diff --git a/target/linux/brcm63xx/patches-4.19/800-wl_exports.patch b/target/linux/brcm63xx/patches-4.19/800-wl_exports.patch
deleted file mode 100644 (file)
index a2f1f26..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -24,6 +24,12 @@
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-+/*
-+ * Required export for WL
-+ */
-+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 };
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
-       u32 crc, expected_crc;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/brcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-4.19/801-ssb_export_fallback_sprom.patch
deleted file mode 100644 (file)
index 11a8353..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/bcm63xx/sprom.c
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -8,6 +8,7 @@
-  */
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
-@@ -387,7 +388,19 @@ struct fallback_sprom_match {
-       struct ssb_sprom sprom;
- };
--static struct fallback_sprom_match fallback_sprom;
-+struct fallback_sprom_match fallback_sprom;
-+
-+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out)
-+{
-+      if (pci_bus != fallback_sprom.pci_bus ||
-+          pci_slot != fallback_sprom.pci_dev)
-+              pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n",
-+                      fallback_sprom.pci_bus, fallback_sprom.pci_dev,
-+                      pci_bus, pci_slot);
-+      memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
-+      return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom);
- #if defined(CONFIG_SSB_PCIHOST)
- int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
diff --git a/target/linux/brcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-4.19/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644 (file)
index 2aca2f3..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
-+#define RTL8367_PHY_AD_REG                    0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE                       BIT(12)
- #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
-@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
-       case RTL8367_EXTIF_MODE_RGMII_33V:
-               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
-               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
-               break;
-       case RTL8367_EXTIF_MODE_TMII_MAC:
diff --git a/target/linux/brcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/brcm63xx/patches-4.19/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch
deleted file mode 100644 (file)
index 7a3c2f0..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 6 Apr 2014 22:33:16 +0200
-Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp
-
-Unligned memcpy_fromio randomly fails with an unaligned dst. Work around
-it by ensuring we are always doing aligned copies.
-
-Should fix filename corruption in jffs2 with SMP.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- fs/jffs2/nodelist.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/fs/jffs2/nodelist.h
-+++ b/fs/jffs2/nodelist.h
-@@ -259,7 +259,7 @@ struct jffs2_full_dirent
-       uint32_t ino; /* == zero for unlink */
-       unsigned int nhash;
-       unsigned char type;
--      unsigned char name[0];
-+      unsigned char name[0] __attribute__((aligned((sizeof(long)))));
- };
- /*
diff --git a/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/brcm63xx/patches-4.19/804-bcm63xx_enet_63268_rgmii_ports.patch
deleted file mode 100644 (file)
index 683221d..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2232,6 +2232,10 @@ static int bcm_enetsw_open(struct net_de
-               rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-               rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              if (BCMCPU_IS_63268()) {
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN;
-+                      rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN;
-+              }
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
diff --git a/target/linux/brcm63xx/profiles/default.mk b/target/linux/brcm63xx/profiles/default.mk
deleted file mode 100644 (file)
index 95cd67c..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2016 LEDE project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-  NAME:=Default Profile
-  PACKAGES:=kmod-b43 wpad-basic
-  PRIORITY:=1
-endef
-
-define Profile/Default/description
-  Package set compatible with most boards.
-endef
-
-$(eval $(call Profile,Default))
diff --git a/target/linux/brcm63xx/smp/config-default b/target/linux/brcm63xx/smp/config-default
deleted file mode 100644 (file)
index 935e97f..0000000
+++ /dev/null
@@ -1,17 +0,0 @@
-CONFIG_CPU_RMAP=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NR_CPUS=2
-CONFIG_PADATA=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_TREE_RCU=y
-CONFIG_XPS=y
diff --git a/target/linux/brcm63xx/smp/target.mk b/target/linux/brcm63xx/smp/target.mk
deleted file mode 100644 (file)
index b0ccf97..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-BOARDNAME:=smp
-
-define Target/Description
-       Build firmware images for BCM63XX boards with SMP support.
-       Currently only BCM6362 and BCM6368 supported.
-endef
-
-