ath79: add support for TP-Link TL-WA901ND v4 and v5

[openwrt/staging/stintel.git] / target / linux / ath79 / dts / tp9343_tplink_tl-wr94x.dtsi

diff --git a/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi b/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
index aeb552530890d87766e887741bf2c5cae36f5b32..ea30d3b311d1a8c09aad644bb299fd108440434e 100644 (file)
--- a/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
+++ b/target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
@@ -1,19 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "tp9343_tplink_tl-wx.dtsi"
 
 / {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               label-mac-device = &wmac;
-       };
-
        keys {
                compatible = "gpio-keys";
 
@@ -30,62 +19,3 @@
                };
        };
 };
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot:  partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x020000 0x3d0000>;
-                       };
-
-                       art: partition@3f0000 {
-                               label = "art";
-                               reg = <0x3f0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&swphy4>;
-
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <1>;
-};
-
-&eth1 {
-       status = "okay";
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
-};