package/base-files/files/bin/config_generate

   1 #!/bin/sh
   2
   3 CFG=/etc/board.json
   4
   5 . /usr/share/libubox/jshn.sh
   6
   7 [ -s $CFG ] || /bin/board_detect || exit 1
   8 [ -s /etc/config/network -a -s /etc/config/system ] && exit 0
   9
  10 generate_bridge() {
  11         local name=$1
  12         local macaddr=$2
  13         uci -q batch <<-EOF
  14                 set network.$name=device
  15                 set network.$name.name=$name
  16                 set network.$name.type=bridge
  17         EOF
  18         if [ -n "$macaddr" ]; then
  19                 uci -q batch <<-EOF
  20                         set network.$name.macaddr=$macaddr
  21                 EOF
  22         fi
  23 }
  24
  25 bridge_vlan_id=0
  26 generate_bridge_vlan() {
  27         local name=$1_vlan
  28         local device=$2
  29         local ports="$3"
  30         local vlan="$4"
  31         uci -q batch <<-EOF
  32                 set network.$name=bridge-vlan
  33                 set network.$name.device='$device'
  34                 set network.$name.vlan='$vlan'
  35                 set network.$name.ports='$ports'
  36         EOF
  37 }
  38
  39 generate_static_network() {
  40         uci -q batch <<-EOF
  41                 delete network.loopback
  42                 set network.loopback='interface'
  43                 set network.loopback.device='lo'
  44                 set network.loopback.proto='static'
  45                 set network.loopback.ipaddr='127.0.0.1'
  46                 set network.loopback.netmask='255.0.0.0'
  47         EOF
  48                 [ -e /proc/sys/net/ipv6 ] && {
  49                         uci -q batch <<-EOF
  50                                 delete network.globals
  51                                 set network.globals='globals'
  52                                 set network.globals.ula_prefix='auto'
  53                         EOF
  54                 }
  55
  56         if json_is_a dsl object; then
  57                 json_select dsl
  58                         if json_is_a atmbridge object; then
  59                                 json_select atmbridge
  60                                         local vpi vci encaps payload nameprefix
  61                                         json_get_vars vpi vci encaps payload nameprefix
  62                                         uci -q batch <<-EOF
  63                                                 delete network.atm
  64                                                 set network.atm='atm-bridge'
  65                                                 set network.atm.vpi='$vpi'
  66                                                 set network.atm.vci='$vci'
  67                                                 set network.atm.encaps='$encaps'
  68                                                 set network.atm.payload='$payload'
  69                                                 set network.atm.nameprefix='$nameprefix'
  70                                         EOF
  71                                 json_select ..
  72                         fi
  73
  74                         if json_is_a modem object; then
  75                                 json_select modem
  76                                         local type annex firmware tone xfer_mode
  77                                         json_get_vars type annex firmware tone xfer_mode
  78                                         uci -q batch <<-EOF
  79                                                 delete network.dsl
  80                                                 set network.dsl='dsl'
  81                                                 set network.dsl.annex='$annex'
  82                                                 set network.dsl.firmware='$firmware'
  83                                                 set network.dsl.tone='$tone'
  84                                                 set network.dsl.xfer_mode='$xfer_mode'
  85                                         EOF
  86                                 json_select ..
  87                         fi
  88                 json_select ..
  89         fi
  90 }
  91
  92 addr_offset=2
  93 generate_network() {
  94         local ports device macaddr protocol type ipaddr netmask vlan
  95         local bridge=$2
  96
  97         json_select network
  98                 json_select "$1"
  99                         json_get_vars device macaddr metric protocol ipaddr netmask vlan
 100                         json_get_values ports ports
 101                 json_select ..
 102         json_select ..
 103
 104         [ -n "$device" -o -n "$ports" ] || return
 105
 106         # Force bridge for "lan" as it may have other devices (e.g. wireless)
 107         # bridged
 108         [ "$1" = "lan" -a -z "$ports" ] && {
 109                 ports="$device"
 110         }
 111
 112         [ -n "$ports" -a -z "$bridge" ] && {
 113                 uci -q batch <<-EOF
 114                         add network device
 115                         set network.@device[-1].name='br-$1'
 116                         set network.@device[-1].type='bridge'
 117                 EOF
 118                 for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
 119                 [ -n "$macaddr" ] && {
 120                         for port in $ports; do
 121                                 uci -q batch <<-EOF
 122                                         add network device
 123                                         set network.@device[-1].name='$port'
 124                                         set network.@device[-1].macaddr='$macaddr'
 125                                 EOF
 126                         done
 127                 }
 128                 device=br-$1
 129                 type=
 130                 macaddr=""
 131         }
 132
 133         [ -n "$bridge" ] && {
 134                 [ -z "$ports" ] && ports="$device"
 135                 if [ -z "$vlan" ]; then
 136                         bridge_vlan_id=$((bridge_vlan_id + 1))
 137                         vlan=$bridge_vlan_id
 138                 fi
 139                 generate_bridge_vlan $1 $bridge "$ports" $vlan
 140                 device=$bridge.$vlan
 141                 type=""
 142         }
 143
 144         if [ -n "$macaddr" ]; then
 145                 uci -q batch <<-EOF
 146                         add network device
 147                         set network.@device[-1].name='$device'
 148                         set network.@device[-1].macaddr='$macaddr'
 149                 EOF
 150         fi
 151
 152         uci -q batch <<-EOF
 153                 delete network.$1
 154                 set network.$1='interface'
 155                 set network.$1.type='$type'
 156                 set network.$1.device='$device'
 157                 set network.$1.metric='$metric'
 158                 set network.$1.proto='none'
 159         EOF
 160
 161         case "$protocol" in
 162                 static)
 163                         local ipad
 164                         case "$1" in
 165                                 lan) ipad=${ipaddr:-"192.168.1.1"} ;;
 166                                 *) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
 167                         esac
 168
 169                         netm=${netmask:-"255.255.255.0"}
 170
 171                         uci -q batch <<-EOF
 172                                 set network.$1.proto='static'
 173                                 set network.$1.ipaddr='$ipad'
 174                                 set network.$1.netmask='$netm'
 175                         EOF
 176                         [ -e /proc/sys/net/ipv6 ] && uci set network.$1.ip6assign='60'
 177                 ;;
 178
 179                 dhcp)
 180                         # fixup IPv6 slave interface if parent is a bridge
 181                         [ "$type" = "bridge" ] && device="br-$1"
 182
 183                         uci set network.$1.proto='dhcp'
 184                         [ -e /proc/sys/net/ipv6 ] && {
 185                                 uci -q batch <<-EOF
 186                                         delete network.${1}6
 187                                         set network.${1}6='interface'
 188                                         set network.${1}6.device='$device'
 189                                         set network.${1}6.proto='dhcpv6'
 190                                 EOF
 191                         }
 192                 ;;
 193
 194                 pppoe)
 195                         uci -q batch <<-EOF
 196                                 set network.$1.proto='pppoe'
 197                                 set network.$1.username='username'
 198                                 set network.$1.password='password'
 199                         EOF
 200                         [ -e /proc/sys/net/ipv6 ] && {
 201                                 uci -q batch <<-EOF
 202                                         set network.$1.ipv6='1'
 203                                         delete network.${1}6
 204                                         set network.${1}6='interface'
 205                                         set network.${1}6.device='@${1}'
 206                                         set network.${1}6.proto='dhcpv6'
 207                                 EOF
 208                         }
 209                 ;;
 210
 211                 ncm|\
 212                 qmi|\
 213                 mbim)
 214                         uci -q batch <<-EOF
 215                                 set network.$1.proto='${protocol}'
 216                                 set network.$1.pdptype='ipv4'
 217                         EOF
 218                 ;;
 219         esac
 220 }
 221
 222 generate_switch_vlans_ports() {
 223         local switch="$1"
 224         local port ports role roles num attr val
 225
 226         #
 227         # autogenerate vlans
 228         #
 229
 230         if json_is_a roles array; then
 231                 json_get_keys roles roles
 232                 json_select roles
 233
 234                 for role in $roles; do
 235                         json_select "$role"
 236                                 json_get_vars ports
 237                         json_select ..
 238
 239                         uci -q batch <<-EOF
 240                                 add network switch_vlan
 241                                 set network.@switch_vlan[-1].device='$switch'
 242                                 set network.@switch_vlan[-1].vlan='$role'
 243                                 set network.@switch_vlan[-1].ports='$ports'
 244                         EOF
 245                 done
 246
 247                 json_select ..
 248         fi
 249
 250
 251         #
 252         # write port specific settings
 253         #
 254
 255         if json_is_a ports array; then
 256                 json_get_keys ports ports
 257                 json_select ports
 258
 259                 for port in $ports; do
 260                         json_select "$port"
 261                                 json_get_vars num
 262
 263                                 if json_is_a attr object; then
 264                                         json_get_keys attr attr
 265                                         json_select attr
 266                                                 uci -q batch <<-EOF
 267                                                         add network switch_port
 268                                                         set network.@switch_port[-1].device='$switch'
 269                                                         set network.@switch_port[-1].port=$num
 270                                                 EOF
 271
 272                                                 for attr in $attr; do
 273                                                         json_get_var val "$attr"
 274                                                         uci -q set network.@switch_port[-1].$attr="$val"
 275                                                 done
 276                                         json_select ..
 277                                 fi
 278                         json_select ..
 279                 done
 280
 281                 json_select ..
 282         fi
 283 }
 284
 285 generate_switch() {
 286         local key="$1"
 287         local vlans
 288
 289         json_select switch
 290         json_select "$key"
 291         json_get_vars enable reset blinkrate cpu_port \
 292                 ar8xxx_mib_type ar8xxx_mib_poll_interval
 293
 294         uci -q batch <<-EOF
 295                 add network switch
 296                 set network.@switch[-1].name='$key'
 297                 set network.@switch[-1].reset='$reset'
 298                 set network.@switch[-1].enable_vlan='$enable'
 299                 set network.@switch[-1].blinkrate='$blinkrate'
 300                 set network.@switch[-1].ar8xxx_mib_type='$ar8xxx_mib_type'
 301                 set network.@switch[-1].ar8xxx_mib_poll_interval='$ar8xxx_mib_poll_interval'
 302         EOF
 303
 304         generate_switch_vlans_ports "$1"
 305
 306         json_select ..
 307         json_select ..
 308 }
 309
 310 generate_static_system() {
 311         uci -q batch <<-EOF
 312                 delete system.@system[0]
 313                 add system system
 314                 set system.@system[-1].hostname='OpenWrt'
 315                 set system.@system[-1].timezone='UTC'
 316                 set system.@system[-1].ttylogin='0'
 317                 set system.@system[-1].log_size='64'
 318                 set system.@system[-1].urandom_seed='0'
 319
 320                 delete system.ntp
 321                 set system.ntp='timeserver'
 322                 set system.ntp.enabled='1'
 323                 set system.ntp.enable_server='0'
 324                 add_list system.ntp.server='0.openwrt.pool.ntp.org'
 325                 add_list system.ntp.server='1.openwrt.pool.ntp.org'
 326                 add_list system.ntp.server='2.openwrt.pool.ntp.org'
 327                 add_list system.ntp.server='3.openwrt.pool.ntp.org'
 328         EOF
 329
 330         if json_is_a system object; then
 331                 json_select system
 332                         local hostname
 333                         if json_get_var hostname hostname; then
 334                                 uci -q set "system.@system[-1].hostname=$hostname"
 335                         fi
 336
 337                         local compat_version
 338                         if json_get_var compat_version compat_version; then
 339                                 uci -q set "system.@system[-1].compat_version=$compat_version"
 340                         else
 341                                 uci -q set "system.@system[-1].compat_version=1.0"
 342                         fi
 343
 344                         if json_is_a ntpserver array; then
 345                                 local keys key
 346                                 json_get_keys keys ntpserver
 347                                 json_select ntpserver
 348                                         uci -q delete "system.ntp.server"
 349
 350                                         for key in $keys; do
 351                                                 local server
 352                                                 if json_get_var server "$key"; then
 353                                                         uci -q add_list "system.ntp.server=$server"
 354                                                 fi
 355                                         done
 356                                 json_select ..
 357                         fi
 358                 json_select ..
 359         fi
 360 }
 361
 362 generate_rssimon() {
 363         local key="$1"
 364         local cfg="rssid_$key"
 365         local refresh threshold
 366
 367         json_select rssimon
 368         json_select "$key"
 369         json_get_vars refresh threshold
 370         json_select ..
 371         json_select ..
 372
 373         uci -q batch <<-EOF
 374                 delete system.$cfg
 375                 set system.$cfg='rssid'
 376                 set system.$cfg.dev='$key'
 377                 set system.$cfg.refresh='$refresh'
 378                 set system.$cfg.threshold='$threshold'
 379         EOF
 380 }
 381
 382 generate_led() {
 383         local key="$1"
 384         local cfg="led_$key"
 385
 386         json_select led
 387         json_select "$key"
 388         json_get_vars name sysfs type trigger default
 389
 390         uci -q batch <<-EOF
 391                 delete system.$cfg
 392                 set system.$cfg='led'
 393                 set system.$cfg.name='$name'
 394                 set system.$cfg.sysfs='$sysfs'
 395                 set system.$cfg.trigger='$trigger'
 396                 set system.$cfg.default='$default'
 397         EOF
 398
 399         case "$type" in
 400                 gpio)
 401                         local gpio inverted
 402                         json_get_vars gpio inverted
 403                         uci -q batch <<-EOF
 404                                 set system.$cfg.trigger='gpio'
 405                                 set system.$cfg.gpio='$gpio'
 406                                 set system.$cfg.inverted='$inverted'
 407                         EOF
 408                 ;;
 409
 410                 netdev)
 411                         local device mode
 412                         json_get_vars device mode
 413                         uci -q batch <<-EOF
 414                                 set system.$cfg.trigger='netdev'
 415                                 set system.$cfg.mode='$mode'
 416                                 set system.$cfg.dev='$device'
 417                         EOF
 418                 ;;
 419
 420                 usb)
 421                         local device
 422                         json_get_vars device
 423                         uci -q batch <<-EOF
 424                                 set system.$cfg.trigger='usbdev'
 425                                 set system.$cfg.interval='50'
 426                                 set system.$cfg.dev='$device'
 427                         EOF
 428                 ;;
 429
 430                 usbport)
 431                         local ports port
 432                         json_get_values ports ports
 433                         uci set system.$cfg.trigger='usbport'
 434                         for port in $ports; do
 435                                 uci add_list system.$cfg.port=$port
 436                         done
 437                 ;;
 438
 439                 rssi)
 440                         local iface minq maxq offset factor
 441                         json_get_vars iface minq maxq offset factor
 442                         uci -q batch <<-EOF
 443                                 set system.$cfg.trigger='rssi'
 444                                 set system.$cfg.iface='rssid_$iface'
 445                                 set system.$cfg.minq='$minq'
 446                                 set system.$cfg.maxq='$maxq'
 447                                 set system.$cfg.offset='$offset'
 448                                 set system.$cfg.factor='$factor'
 449                         EOF
 450                 ;;
 451
 452                 switch)
 453                         local port_mask speed_mask mode
 454                         json_get_vars port_mask speed_mask mode
 455                         uci -q batch <<-EOF
 456                                 set system.$cfg.port_mask='$port_mask'
 457                                 set system.$cfg.speed_mask='$speed_mask'
 458                                 set system.$cfg.mode='$mode'
 459                         EOF
 460                 ;;
 461
 462                 portstate)
 463                         local port_state
 464                         json_get_vars port_state
 465                         uci -q batch <<-EOF
 466                                 set system.$cfg.port_state='$port_state'
 467                         EOF
 468                 ;;
 469
 470                 timer|oneshot)
 471                         local delayon delayoff
 472                         json_get_vars delayon delayoff
 473                         uci -q batch <<-EOF
 474                                 set system.$cfg.trigger='$type'
 475                                 set system.$cfg.delayon='$delayon'
 476                                 set system.$cfg.delayoff='$delayoff'
 477                         EOF
 478                 ;;
 479         esac
 480
 481         json_select ..
 482         json_select ..
 483 }
 484
 485 generate_gpioswitch() {
 486         local cfg="$1"
 487
 488         json_select gpioswitch
 489                 json_select "$cfg"
 490                         local name pin default
 491                         json_get_vars name pin default
 492                         uci -q batch <<-EOF
 493                                 delete system.$cfg
 494                                 set system.$cfg='gpio_switch'
 495                                 set system.$cfg.name='$name'
 496                                 set system.$cfg.gpio_pin='$pin'
 497                                 set system.$cfg.value='$default'
 498                         EOF
 499                 json_select ..
 500         json_select ..
 501 }
 502
 503 json_init
 504 json_load "$(cat ${CFG})"
 505
 506 umask 077
 507
 508 if [ ! -s /etc/config/network ]; then
 509         bridge_name=""
 510         touch /etc/config/network
 511         generate_static_network
 512
 513         json_get_vars bridge
 514         [ -n "$bridge" ] && {
 515                 json_select bridge
 516                 json_get_vars name macaddr
 517                 generate_bridge "$name" "$macaddr"
 518                 json_select ..
 519                 bridge_name=$name
 520         }
 521
 522         json_get_keys keys network
 523         for key in $keys; do generate_network $key $bridge_name; done
 524
 525         json_get_keys keys switch
 526         for key in $keys; do generate_switch $key; done
 527 fi
 528
 529 if [ ! -s /etc/config/system ]; then
 530         touch /etc/config/system
 531         generate_static_system
 532
 533         json_get_keys keys rssimon
 534         for key in $keys; do generate_rssimon $key; done
 535
 536         json_get_keys keys gpioswitch
 537         for key in $keys; do generate_gpioswitch $key; done
 538
 539         json_get_keys keys led
 540         for key in $keys; do generate_led $key; done
 541 fi
 542 uci commit