package/firmware/ipq-wifi/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/version.mk
   3
   4 PKG_NAME:=ipq-wifi
   5 PKG_RELEASE:=1
   6 PKG_FLAGS:=nonshared
   7
   8 include $(INCLUDE_DIR)/package.mk
   9
  10 define Build/Prepare
  11         mkdir -p $(PKG_BUILD_DIR)
  12 endef
  13
  14 define Build/Compile
  15 endef
  16
  17 #
  18 # This is intended to be used on an interim basis until device-specific
  19 # board data for new devices is available through the upstream compilation
  20 #
  21 # Please send a mail with your device-specific board files upstream.
  22 # You can find instructions and examples on the linux-wireless wiki:
  23 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
  24 #
  25
  26 ALLWIFIBOARDS:= \
  27         aruba_ap-303 \
  28         avm_fritzrepeater-1200 \
  29         ezviz_cs-w3-wd1200g-eup \
  30         linksys_ea8300 \
  31         qxwlan_e2600ac
  32
  33 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
  34
  35 define Package/ipq-wifi-default
  36   SUBMENU:=ath10k Board-Specific Overrides
  37   SECTION:=firmware
  38   CATEGORY:=Firmware
  39   DEPENDS:=@TARGET_ipq40xx
  40   TITLE:=Custom Board
  41 endef
  42
  43 define ipq-wifi-install-one-to
  44   $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
  45   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
  46 endef
  47
  48 # Note: .bin deprecated; supports existing boards
  49
  50 define ipq-wifi-install-one
  51   $(if $(filter $(suffix $(1)),.QCA4019 .qca4019 .bin),\
  52     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
  53   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
  54     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
  55   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
  56     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
  57     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
  58   )))
  59
  60 endef
  61 # Blank line required at end of above define due to foreach context
  62
  63 define generate-ipq-wifi-package
  64   define Package/ipq-wifi-$(1)
  65     $(call Package/ipq-wifi-default)
  66     TITLE:=board-2.bin Overrides for $(2)
  67     CONFLICTS:=$(PREV_BOARD)
  68   endef
  69
  70   define Package/ipq-wifi-$(1)/description
  71 The $(2) requires board-specific, reference ("cal") data
  72 that is not yet present in the upstream wireless firmware distribution.
  73
  74 This package supplies board-2.bin file(s) that, in the interim,
  75 overwrite those supplied by the ath10k-firmware-* packages.
  76
  77 This is package is only necessary for the $(2).
  78
  79 Do not install it for any other device!
  80   endef
  81
  82   define Package/ipq-wifi-$(1)/install-overlay
  83     $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
  84       $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
  85   endef
  86
  87   PREV_BOARD+=ipq-wifi-$(1)
  88 endef
  89
  90 # Add board name to ALLWIFIBOARDS
  91 # Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
  92 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
  93
  94 $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
  95 $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
  96 $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
  97 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
  98 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
  99
 100 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))