package/firmware/ipq-wifi/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/version.mk
   3
   4 PKG_NAME:=ipq-wifi
   5 PKG_RELEASE:=1
   6 PKG_FLAGS:=nonshared
   7
   8 include $(INCLUDE_DIR)/package.mk
   9
  10 define Build/Prepare
  11         mkdir -p $(PKG_BUILD_DIR)
  12 endef
  13
  14 define Build/Compile
  15 endef
  16
  17 # Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
  18 # to generate the board-* files here.
  19 #
  20 # This is intended to be used on an interim basis until device-specific
  21 # board data for new devices is available through the upstream compilation
  22 #
  23 # Please send a mail with your device-specific board files upstream.
  24 # You can find instructions and examples on the linux-wireless wiki:
  25 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
  26
  27 ALLWIFIBOARDS:= \
  28         aruba_ap-303 \
  29         avm_fritzrepeater-1200 \
  30         dlink_dap2610 \
  31         engenius_emd1 \
  32         ezviz_cs-w3-wd1200g-eup \
  33         linksys_ea8300 \
  34         qxwlan_e2600ac
  35
  36 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
  37
  38 define Package/ipq-wifi-default
  39   SUBMENU:=ath10k Board-Specific Overrides
  40   SECTION:=firmware
  41   CATEGORY:=Firmware
  42   DEPENDS:=@TARGET_ipq40xx
  43   TITLE:=Custom Board
  44 endef
  45
  46 define ipq-wifi-install-one-to
  47   $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
  48   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
  49 endef
  50
  51 define ipq-wifi-install-one
  52   $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
  53     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
  54   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
  55     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
  56   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
  57     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
  58     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
  59   )))
  60
  61 endef
  62 # Blank line required at end of above define due to foreach context
  63
  64 define generate-ipq-wifi-package
  65   define Package/ipq-wifi-$(1)
  66     $(call Package/ipq-wifi-default)
  67     TITLE:=board-2.bin Overrides for $(2)
  68     CONFLICTS:=$(PREV_BOARD)
  69   endef
  70
  71   define Package/ipq-wifi-$(1)/description
  72 The $(2) requires board-specific, reference ("cal") data
  73 that is not yet present in the upstream wireless firmware distribution.
  74
  75 This package supplies board-2.bin file(s) that, in the interim,
  76 overwrite those supplied by the ath10k-firmware-* packages.
  77
  78 This is package is only necessary for the $(2).
  79
  80 Do not install it for any other device!
  81   endef
  82
  83   define Package/ipq-wifi-$(1)/install-overlay
  84     $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
  85       $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
  86   endef
  87
  88   PREV_BOARD+=ipq-wifi-$(1)
  89 endef
  90
  91 # Add board name to ALLWIFIBOARDS
  92 # Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
  93 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
  94
  95 $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
  96 $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
  97 $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
  98 $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
  99 $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
 100 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 101 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
 102
 103 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))