enable start-stop-daemon by default, i want to use this to clean up a few init script...
[openwrt/staging/wigyori.git] / target / linux / adm5120-2.6 / files / include / asm-mips / mach-adm5120 / prom / routerboot.h
1 /*
2 * $Id$
3 *
4 * Mikrotik's RouterBOOT definitions
5 *
6 * Copyright (C) 2007 OpenWrt.org
7 * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the
21 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22 * Boston, MA 02110-1301, USA.
23 */
24
25 #ifndef _ROUTERBOOT_H
26 #define _ROUTERBOOT_H
27
28 #define RB_MAC_SIZE 6
29 #define RB_MAX_MAC_COUNT 6
30
31 struct rb_bios_settings {
32 u32 hs_offs; /* hard settings offset */
33 u32 hs_size; /* hard settings size */
34 u32 fw_offs; /* firmware offset */
35 u32 ss_offs; /* soft settings offset */
36 u32 ss_size; /* soft settings size */
37 };
38
39 struct rb_hard_settings {
40 char *name; /* board name */
41 char *bios_ver; /* BIOS version */
42 u32 mem_size; /* memory size in bytes */
43 u32 mac_count; /* number of mac addresses */
44 u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */
45 };
46
47 /*
48 * Magic numbers
49 */
50 #define RB_MAGIC_HARD 0x64726148 /* "Hard" */
51 #define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
52 #define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
53
54 #define RB_ID_TERMINATOR 0
55
56 /*
57 * ID values for Hardware settings
58 */
59 #define RB_ID_HARD_01 1
60 #define RB_ID_HARD_02 2
61 #define RB_ID_FLASH_INFO 3
62 #define RB_ID_MAC_ADDRESS_PACK 4
63 #define RB_ID_BOARD_NAME 5
64 #define RB_ID_BIOS_VERSION 6
65 #define RB_ID_HARD_07 7
66 #define RB_ID_SDRAM_TIMINGS 8
67 #define RB_ID_DEVICE_TIMINGS 9
68 #define RB_ID_SOFTWARE_ID 10
69 #define RB_ID_SERIAL_NUMBER 11
70 #define RB_ID_HARD_12 12
71 #define RB_ID_MEMORY_SIZE 13
72 #define RB_ID_MAC_ADDRESS_COUNT 14
73
74 /*
75 * ID values for Software settings
76 */
77 #define RB_ID_UART_SPEED 1
78 #define RB_ID_BOOT_DELAY 2
79 #define RB_ID_BOOT_DEVICE 3
80 #define RB_ID_BOOT_KEY 4
81 #define RB_ID_CPU_MODE 5
82 #define RB_ID_FW_VERSION 6
83 #define RB_ID_SOFT_07 7
84 #define RB_ID_SOFT_08 8
85 #define RB_ID_BOOT_PROTOCOL 9
86 #define RB_ID_SOFT_10 10
87 #define RB_ID_SOFT_11 11
88
89 /*
90 * UART_SPEED values
91 */
92 #define RB_UART_SPEED_115200 0
93 #define RB_UART_SPEED_57600 1
94 #define RB_UART_SPEED_38400 2
95 #define RB_UART_SPEED_19200 3
96 #define RB_UART_SPEED_9600 4
97 #define RB_UART_SPEED_4800 5
98 #define RB_UART_SPEED_2400 6
99 #define RB_UART_SPEED_1200 7
100
101 /*
102 * BOOT_DELAY values
103 */
104 #define RB_BOOT_DELAY_0SEC 0
105 #define RB_BOOT_DELAY_1SEC 1
106 #define RB_BOOT_DELAY_2SEC 2
107
108 /*
109 * BOOT_DEVICE values
110 */
111 #define RB_BOOT_DEVICE_ETHER 0
112 #define RB_BOOT_DEVICE_NANDETH 1
113 #define RB_BOOT_DEVICE_ETHONCE 2
114 #define RB_BOOT_DEVICE_NANDONLY 3
115
116 /*
117 * BOOT_KEY values
118 */
119 #define RB_BOOT_KEY_ANY 0
120 #define RB_BOOT_KEY_DEL 1
121
122 /*
123 * CPU_MODE values
124 */
125 #define RB_CPU_MODE_POWERSAVE 0
126 #define RB_CPU_MODE_REGULAR 1
127
128 /*
129 * BOOT_PROTOCOL values
130 */
131 #define RB_BOOT_PROTOCOL_BOOTP 0
132 #define RB_BOOT_PROTOCOL_DHCP 1
133
134 extern int routerboot_present(void) __init;
135 extern char *routerboot_get_boardname(void);
136
137 #endif /* _ROUTERBOOT_H */