enable start-stop-daemon by default, i want to use this to clean up a few init script...
[openwrt/staging/wigyori.git] / target / linux / ar7-2.6 / files / include / asm-mips / ar7 / ar7.h
1 /*
2 * $Id$
3 *
4 * Copyright (C) 2006, 2007 OpenWrt.org
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 */
20
21 #ifndef __AR7_H__
22 #define __AR7_H__
23
24 #include <linux/delay.h>
25 #include <asm/addrspace.h>
26 #include <asm/io.h>
27
28 #define AR7_REGS_BASE 0x08610000
29
30 #define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
31 #define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
32 #define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) // 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock)
33 #define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
34 #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
35 #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
36 #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1A00)
37 #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00)
38 #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1E00)
39 #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
40 #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800)
41
42 #define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
43 #define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
44 #define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
45
46 #define AR7_RESET_PEREPHERIAL 0x0
47 #define AR7_RESET_SOFTWARE 0x4
48 #define AR7_RESET_STATUS 0x8
49
50 #define AR7_RESET_BIT_CPMAC_LO 17
51 #define AR7_RESET_BIT_CPMAC_HI 21
52 #define AR7_RESET_BIT_MDIO 22
53 #define AR7_RESET_BIT_EPHY 26
54
55 /* GPIO control registers */
56 #define AR7_GPIO_INPUT 0x0
57 #define AR7_GPIO_OUTPUT 0x4
58 #define AR7_GPIO_DIR 0x8
59 #define AR7_GPIO_ENABLE 0xC
60
61 #define AR7_CHIP_7100 0x18
62 #define AR7_CHIP_7200 0x2b
63 #define AR7_CHIP_7300 0x05
64
65 /* Interrupts */
66 #define AR7_IRQ_UART0 15
67 #define AR7_IRQ_UART1 16
68
69 /* Clocks */
70 #define AR7_AFE_CLOCK 35328000
71 #define AR7_REF_CLOCK 25000000
72 #define AR7_XTAL_CLOCK 24000000
73
74 struct plat_cpmac_data {
75 int reset_bit;
76 int power_bit;
77 u32 phy_mask;
78 char dev_addr[6];
79 };
80
81 struct plat_dsl_data {
82 int reset_bit_dsl;
83 int reset_bit_sar;
84 };
85
86 extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
87
88 static inline u16 ar7_chip_id(void)
89 {
90 return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
91 }
92
93 static inline u8 ar7_chip_rev(void)
94 {
95 return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
96 }
97
98 static inline int ar7_cpu_freq(void)
99 {
100 return ar7_cpu_clock;
101 }
102
103 static inline int ar7_bus_freq(void)
104 {
105 return ar7_bus_clock;
106 }
107
108 static inline int ar7_vbus_freq(void)
109 {
110 return ar7_bus_clock / 2;
111 }
112 #define ar7_cpmac_freq ar7_vbus_freq
113
114 static inline int ar7_dsp_freq(void)
115 {
116 return ar7_dsp_clock;
117 }
118
119 static inline int ar7_has_high_cpmac(void)
120 {
121 u16 chip_id = ar7_chip_id();
122 switch (chip_id) {
123 case AR7_CHIP_7100:
124 case AR7_CHIP_7200:
125 return 0;
126 default:
127 return 1;
128 }
129 }
130 #define ar7_has_high_vlynq ar7_has_high_cpmac
131 #define ar7_has_second_uart ar7_has_high_cpmac
132
133 static inline void ar7_device_enable(u32 bit)
134 {
135 void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
136 writel(readl(reset_reg) | (1 << bit), reset_reg);
137 mdelay(20);
138 }
139
140 static inline void ar7_device_disable(u32 bit)
141 {
142 void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
143 writel(readl(reset_reg) & ~(1 << bit), reset_reg);
144 mdelay(20);
145 }
146
147 static inline void ar7_device_reset(u32 bit)
148 {
149 ar7_device_disable(bit);
150 ar7_device_enable(bit);
151 }
152
153 static inline void ar7_device_on(u32 bit)
154 {
155 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
156 writel(readl(power_reg) | (1 << bit), power_reg);
157 mdelay(20);
158 }
159
160 static inline void ar7_device_off(u32 bit)
161 {
162 void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
163 writel(readl(power_reg) & ~(1 << bit), power_reg);
164 mdelay(20);
165 }
166
167 #endif /* __AR7_H__ */