target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
  11         model = "Buffalo WZR-HP-G450H";
  12
  13         keys {
  14                 compatible = "gpio-keys-polled";
  15                 poll-interval = <20>;
  16
  17                 usb {
  18                         linux,code = <BTN_2>;
  19                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  20                         debounce-interval = <60>;
  21                 };
  22
  23                 reset {
  24                         linux,code = <KEY_RESTART>;
  25                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 movie_engine {
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 aoss {
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40
  41                 router_off {
  42                         linux,code = <BTN_5>;
  43                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  44                         debounce-interval = <60>;
  45                 };
  46
  47         };
  48
  49         leds {
  50                 compatible = "gpio-leds";
  51                 security {
  52                         label = "buffalo:orange:security";
  53                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 diag {
  57                         label = "buffalo:red:diag";
  58                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61
  62         gpio-export {
  63                 compatible = "gpio-export";
  64                 #size-cells = <0>;
  65
  66                 gpio_usb_power {
  67                         gpio-export,name = "wzr-hp-g450h:usb-power";
  68                         gpio-export,output = <1>;
  69                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  70                 };
  71         };
  72 };
  73
  74 &mdio0 {
  75         status = "okay";
  76         phy-mask = <0x1>;
  77
  78         phy0: ethernet-phy@0 {
  79                 reg = <0>;
  80                 phy-mode = "rgmii";
  81         };
  82 };
  83
  84 &eth0 {
  85         status = "okay";
  86
  87         phy-mode = "rgmii";
  88         pll-data = <0x62000000 0 0>;
  89
  90         fixed-link {
  91                 speed = <1000>;
  92                 full-duplex;
  93         };
  94 };
  95
  96 &uart {
  97         status = "okay";
  98 };
  99
 100 &usb_phy {
 101         status = "okay";
 102 };
 103
 104 &usb {
 105         status = "okay";
 106 };
 107
 108 &pcie {
 109         status = "okay";
 110
 111         wifi@0,0 {
 112                 reg = <0x0000 0 0 0 0>;
 113                 qca,no-eeprom;
 114         };
 115 };