target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND v1";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <40000000>;
  25         };
  26
  27         keys {
  28                 compatible = "gpio-keys";
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36
  37                 qss {
  38                         label = "qss";
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                 };
  43         };
  44
  45         leds {
  46                 compatible = "gpio-leds";
  47
  48                 usb {
  49                         label = "tp-link:green:usb";
  50                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  51                         trigger-sources = <&hub_port>;
  52                         linux,default-trigger = "usbport";
  53                 };
  54
  55                 led_system: system {
  56                         label = "tp-link:green:system";
  57                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "heartbeat";
  59                 };
  60
  61                 qss {
  62                         label = "tp-link:green:qss";
  63                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  64                 };
  65
  66                 wlan {
  67                         label = "tp-link:green:wlan";
  68                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  69                         linux,default-trigger = "phy0tpt";
  70                 };
  71         };
  72
  73         rtl8366rb {
  74                 compatible = "realtek,rtl8366rb";
  75                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  76                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  77
  78                 resets = <&rst 8>;
  79                 reset-names = "switch";
  80         };
  81 };
  82
  83 &uart {
  84         status = "okay";
  85 };
  86
  87 &pll {
  88         clocks = <&extosc>;
  89 };
  90
  91 &usb {
  92         #address-cells = <1>;
  93         #size-cells = <0>;
  94         status = "okay";
  95
  96         hub_port: port@1 {
  97                 reg = <1>;
  98                 #trigger-source-cells = <0>;
  99         };
 100 };
 101
 102 &usb_phy {
 103         status = "okay";
 104 };
 105
 106 &spi {
 107         status = "okay";
 108
 109         num-cs = <1>;
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115                 m25p,fast-read;
 116
 117                 partitions {
 118                         compatible = "fixed-partitions";
 119                         #address-cells = <1>;
 120                         #size-cells = <1>;
 121
 122                         uboot: partition@0 {
 123                                 label = "u-boot";
 124                                 reg = <0x000000 0x020000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@20000 {
 129                                 compatible = "tplink,firmware";
 130                                 label = "firmware";
 131                                 reg = <0x020000 0x7D0000>;
 132                         };
 133
 134                         art: partition@7F0000 {
 135                                 label = "art";
 136                                 reg = <0x7F0000 0x010000>;
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &eth0 {
 144         status = "okay";
 145
 146         phy-mode = "rgmii";
 147         mtd-mac-address = <&uboot 0x1fc00>;
 148
 149         fixed-link {
 150                 speed = <1000>;
 151                 full-duplex;
 152         };
 153 };
 154
 155 &wmac {
 156         status = "okay";
 157
 158         mtd-cal-data = <&art 0x1000>;
 159         mtd-mac-address = <&uboot 0x1fc00>;
 160 };