1ce8851a11d745c0e2bbd06de94592df0c1b6e67
[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / ar9331_embeddedwireless_dorin.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "ar9331.dtsi"
8
9 / {
10 model = "Embedded Wireless Dorin";
11 compatible = "embeddedwireless,dorin", "qca,ar9331";
12
13 aliases {
14 led-status = &status;
15 serial0 = &uart;
16 };
17
18 leds {
19 compatible = "gpio-leds";
20
21 status: status {
22 label = "dorin:green:status";
23 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
24 default-state = "off";
25 };
26 };
27
28 keys {
29 compatible = "gpio-keys-polled";
30 #address-cells = <1>;
31 #size-cells = <0>;
32 poll-interval = <100>;
33
34 wps {
35 label = "wps";
36 linux,code = <KEY_WPS_BUTTON>;
37 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
38 };
39
40 reset {
41 label = "reset";
42 linux,code = <KEY_RESTART>;
43 gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
44 };
45 };
46 };
47
48 &uart {
49 status = "okay";
50 };
51
52 &gpio {
53 status = "okay";
54 };
55
56 &usb {
57 dr_mode = "host";
58 status = "okay";
59 };
60
61 &usb_phy {
62 status = "okay";
63 };
64
65 &spi {
66 num-chipselects = <1>;
67 status = "okay";
68
69 spiflash {
70 #address-cells = <1>;
71 #size-cells = <1>;
72 compatible = "jedec,spi-nor";
73 spi-max-frequency = <104000000>;
74 reg = <0>;
75
76 partitions {
77 compatible = "fixed-partitions";
78 #address-cells = <1>;
79 #size-cells = <1>;
80
81 partition@0 {
82 label = "u-boot";
83 reg = <0x000000 0x040000>;
84 read-only;
85 };
86
87 partition@1 {
88 label = "u-boot-env";
89 reg = <0x040000 0x010000>;
90 };
91
92 partition@2 {
93 label = "firmware";
94 reg = <0x050000 0xfa0000>;
95 };
96
97 art: partition@3 {
98 label = "ART";
99 reg = <0xff0000 0x010000>;
100 read-only;
101 };
102 };
103 };
104 };
105
106 &eth1 {
107 status = "okay";
108
109 mtd-mac-address = <&art 0x1002>;
110 mtd-mac-address-increment = <0x40>;
111 };
112
113 &mdio1 {
114 status = "okay";
115 };
116
117 &wmac {
118 status = "okay";
119 mtd-cal-data = <&art 0x1000>;
120 mtd-mac-address = <&art 0x1002>;
121 };