target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
  11         model = "TP-Link TL-WR902AC v1";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_power: power {
  29                         label = "tp-link:green:power";
  30                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  31                         default-state = "on";
  32                 };
  33
  34                 internet {
  35                         label = "tp-link:green:internet";
  36                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan2g {
  40                         label = "tp-link:green:wlan2g";
  41                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 usb {
  46                         label = "tp-link:green:usb";
  47                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  48                         trigger-sources = <&hub_port0>;
  49                         linux,default-trigger = "usbport";
  50                 };
  51
  52                 wps {
  53                         label = "tp-link:green:wps";
  54                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 lan {
  58                         label = "tp-link:green:lan";
  59                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset {
  67                         label = "Reset button";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 wps {
  73                         label = "WPS button";
  74                         linux,code = <KEY_WPS_BUTTON>;
  75                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 sw1 {
  79                         label = "Mode switch 1";
  80                         linux,code = <BTN_0>;
  81                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  82                 };
  83
  84                 sw2 {
  85                         label = "Mode switch 2";
  86                         linux,code = <BTN_1>;
  87                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  88                 };
  89         };
  90
  91         gpio-export {
  92                 compatible = "gpio-export";
  93
  94                 gpio_usb_power {
  95                         gpio-export,name = "tp-link:power:usb";
  96                         gpio-export,output = <1>;
  97                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  98                 };
  99         };
 100 };
 101
 102 &uart {
 103         status = "okay";
 104 };
 105
 106 &spi {
 107         status = "okay";
 108
 109         flash@0 {
 110                 compatible = "jedec,spi-nor";
 111                 reg = <0>;
 112                 spi-max-frequency = <25000000>;
 113
 114                 partitions {
 115                         compatible = "fixed-partitions";
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118
 119                         partition@0 {
 120                                 label = "u-boot";
 121                                 reg = <0x000000 0x020000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@20000 {
 126                                 compatible = "tplink,firmware";
 127                                 label = "firmware";
 128                                 reg = <0x020000 0x730000>;
 129                         };
 130
 131                         tplink: partition@750000 {
 132                                 label = "tplink";
 133                                 reg = <0x750000 0x0a0000>;
 134                                 read-only;
 135                         };
 136
 137                         art: partition@7f0000 {
 138                                 label = "art";
 139                                 reg = <0x7f0000 0x010000>;
 140                                 read-only;
 141                         };
 142                 };
 143         };
 144 };
 145
 146 &eth0 {
 147         status = "okay";
 148
 149         phy-handle = <&swphy4>;
 150
 151         mtd-mac-address = <&tplink 0x8>;
 152         mtd-mac-address-increment = <1>;
 153 };
 154
 155 &eth1 {
 156         compatible = "syscon", "simple-mfd";
 157 };
 158
 159 &wmac {
 160         status = "okay";
 161
 162         mtd-cal-data = <&art 0x1000>;
 163         mtd-mac-address = <&tplink 0x8>;
 164 };
 165
 166 &pcie0 {
 167         status = "okay";
 168
 169         wifi@0,0 {
 170                 compatible = "pci168c,0050";
 171                 reg = <0x0000 0 0 0 0>;
 172         };
 173 };
 174
 175 &usb_phy {
 176         status = "okay";
 177 };
 178
 179 &usb0 {
 180         #address-cells = <1>;
 181         #size-cells = <0>;
 182         status = "okay";
 183
 184         hub_port0: port@1 {
 185                 reg = <1>;
 186                 #trigger-source-cells = <0>;
 187         };
 188 };