target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9533.dtsi"
   7
   8 / {
   9         compatible = "glinet,ar300m", "qca,qca9533";
  10         model = "GL.iNet GL-AR300M";
  11
  12         keys {
  13                 compatible = "gpio-keys-polled";
  14                 poll-interval = <20>;
  15                 pinctrl-names = "default";
  16                 pinctrl-0 = <&jtag_disable_pins>;
  17
  18                 button0 {
  19                         label = "reset";
  20                         linux,code = <KEY_RESTART>;
  21                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 button1 {
  25                         label = "button right";
  26                         linux,code = <BTN_0>;
  27                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  28                 };
  29
  30                 button3 {
  31                         label = "button left";
  32                         linux,code = <BTN_1>;
  33                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 usb {
  41                         label = "gl-ar300m:green:usb";
  42                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  43                         trigger-sources = <&hub_port>;
  44                         linux,default-trigger = "usbport";
  45                 };
  46
  47                 wlan {
  48                         label = "gl-ar300m:green:wlan";
  49                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy0tpt";
  51                 };
  52
  53                 lan {
  54                         label = "gl-ar300m:green:lan";
  55                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 status {
  59                         label = "gl-ar300m:green:status";
  60                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63 };
  64
  65 &pcie0 {
  66         status = "okay";
  67 };
  68
  69 &uart {
  70         status = "okay";
  71 };
  72
  73 &usb0 {
  74         #address-cells = <1>;
  75         #size-cells = <0>;
  76         status = "okay";
  77
  78         hub_port: port@1 {
  79                 reg = <1>;
  80                 #trigger-source-cells = <0>;
  81         };
  82 };
  83
  84 &usb_phy {
  85         status = "okay";
  86 };
  87
  88 &eth0 {
  89         status = "okay";
  90         mtd-mac-address = <&art 0x0>;
  91         phy-handle = <&swphy4>;
  92 };
  93
  94 &eth1 {
  95         mtd-mac-address = <&art 0x6>;
  96 };
  97
  98 &wmac {
  99         status = "okay";
 100         mtd-cal-data = <&art 0x1000>;
 101         mtd-mac-address = <&art 0x1002>;
 102 };