target/linux/ath79/dts/qca9558_engenius_epg5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         model = "EnGenius EPG5000";
  11         compatible = "engenius,epg5000", "qca,qca9557";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power;
  19                 led-failsafe = &power;
  20                 led-running = &power;
  21                 led-upgrade = &power;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power: power {
  28                         label = "epg5000:amber:power";
  29                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wan {
  34                         label = "epg5000:blue:wan";
  35                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wlan2g {
  39                         label = "epg5000:blue:wlan2g";
  40                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  41                         linux,default-trigger = "phy1tpt";
  42                 };
  43
  44                 wlan5g {
  45                         label = "epg5000:blue:wlan5g";
  46                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "phy0tpt";
  48                 };
  49
  50                 wps {
  51                         label = "epg5000:blue:wps";
  52                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys-polled";
  58                 poll-interval = <20>;
  59
  60                 reset {
  61                         label = "reset";
  62                         linux,code = <KEY_RESTART>;
  63                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  64                         debounce-interval = <60>;
  65                 };
  66
  67                 wps {
  68                         label = "wps";
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  71                         debounce-interval = <60>;
  72                 };
  73         };
  74 };
  75
  76 &eth0 {
  77         status = "okay";
  78
  79         phy-handle = <&phy0>;
  80         pll-data = <0xa6000000 0x00000101 0x00001616>;
  81 };
  82
  83 &mdio0 {
  84         status = "okay";
  85
  86         phy0: ethernet-phy@0 {
  87                 reg = <0>;
  88
  89                 qca,ar8327-initvals = <
  90                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
  91                         0x7c 0x0000007e /* PORT0_STATUS */
  92                         >;
  93         };
  94 };
  95
  96 &pcie0 {
  97         status = "okay";
  98
  99         wifi@0,0 {
 100                 compatible = "pci168c,003c";
 101                 reg = <0x0000 0 0 0 0>;
 102         };
 103 };
 104
 105 &spi {
 106         status = "okay";
 107
 108         num-cs = <1>;
 109
 110         flash@0 {
 111                 compatible = "jedec,spi-nor";
 112                 reg = <0>;
 113                 spi-max-frequency = <25000000>;
 114
 115                 partitions {
 116                         compatible = "fixed-partitions";
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119
 120                         partition@0 {
 121                                 label = "u-boot";
 122                                 reg = <0x000000 0x030000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@30000 {
 127                                 label = "u-boot-env";
 128                                 reg = <0x030000 0x010000>;
 129                         };
 130
 131                         partition@40000 {
 132                                 compatible = "denx,uimage";
 133                                 label = "firmware";
 134                                 reg = <0x040000 0xe50000>;
 135                         };
 136
 137                         partition@790000 {
 138                                 label = "manufacture";
 139                                 reg = <0xe90000 0x100000>;
 140                                 read-only;
 141                         };
 142
 143                         partition@ed0000 {
 144                                 label = "backup";
 145                                 reg = <0xf90000 0x010000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@fe0000 {
 150                                 label = "storage";
 151                                 reg = <0xfa0000 0x050000>;
 152                                 read-only;
 153                         };
 154
 155                         partition@ff0000 {
 156                                 label = "art";
 157                                 reg = <0xff0000 0x010000>;
 158                                 read-only;
 159                         };
 160                 };
 161         };
 162 };
 163
 164 &uart {
 165         status = "okay";
 166 };
 167
 168 &usb_phy1 {
 169         status = "okay";
 170 };
 171
 172 &usb1 {
 173         status = "okay";
 174 };
 175
 176 &wmac {
 177         status = "okay";
 178
 179         qca,no-eeprom;
 180 };