target/linux/ath79/dts/qca9558_engenius_epg5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         model = "EnGenius EPG5000";
  11         compatible = "engenius,epg5000", "qca,qca9558";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "epg5000:amber:power";
  29                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wlan2g {
  34                         label = "epg5000:blue:wlan2g";
  35                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39                 wlan5g {
  40                         label = "epg5000:blue:wlan5g";
  41                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 wps_amber {
  46                         label = "epg5000:amber:wps";
  47                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wps_blue {
  51                         label = "epg5000:blue:wps";
  52                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys";
  58
  59                 reset {
  60                         label = "reset";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  63                         debounce-interval = <60>;
  64                 };
  65
  66                 wps {
  67                         label = "wps";
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73 };
  74
  75 &eth0 {
  76         status = "okay";
  77
  78         phy-handle = <&phy0>;
  79         pll-data = <0xa6000000 0x00000101 0x00001616>;
  80 };
  81
  82 &mdio0 {
  83         status = "okay";
  84
  85         phy0: ethernet-phy@0 {
  86                 reg = <0>;
  87
  88                 qca,ar8327-initvals = <
  89                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
  90                         0x7c 0x0000007e /* PORT0_STATUS */
  91                         >;
  92         };
  93 };
  94
  95 &pcie0 {
  96         status = "okay";
  97
  98         wifi@0,0 {
  99                 compatible = "pci168c,003c";
 100                 reg = <0x0000 0 0 0 0>;
 101         };
 102 };
 103
 104 &spi {
 105         status = "okay";
 106
 107         num-cs = <1>;
 108
 109         flash@0 {
 110                 compatible = "jedec,spi-nor";
 111                 reg = <0>;
 112                 spi-max-frequency = <25000000>;
 113
 114                 partitions {
 115                         compatible = "fixed-partitions";
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118
 119                         partition@0 {
 120                                 label = "u-boot";
 121                                 reg = <0x000000 0x030000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@30000 {
 126                                 label = "u-boot-env";
 127                                 reg = <0x030000 0x010000>;
 128                         };
 129
 130                         partition@40000 {
 131                                 compatible = "denx,uimage";
 132                                 label = "firmware";
 133                                 reg = <0x040000 0xe50000>;
 134                         };
 135
 136                         partition@790000 {
 137                                 label = "manufacture";
 138                                 reg = <0xe90000 0x100000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@ed0000 {
 143                                 label = "backup";
 144                                 reg = <0xf90000 0x010000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@fe0000 {
 149                                 label = "storage";
 150                                 reg = <0xfa0000 0x050000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@ff0000 {
 155                                 label = "art";
 156                                 reg = <0xff0000 0x010000>;
 157                                 read-only;
 158                         };
 159                 };
 160         };
 161 };
 162
 163 &uart {
 164         status = "okay";
 165 };
 166
 167 &usb_phy1 {
 168         status = "okay";
 169 };
 170
 171 &usb1 {
 172         status = "okay";
 173 };
 174
 175 &wmac {
 176         status = "okay";
 177
 178         qca,no-eeprom;
 179 };