target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 wps {
  17                         linux,code = <KEY_WPS_BUTTON>;
  18                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  19                         debounce-interval = <60>;
  20                 };
  21
  22                 reset {
  23                         linux,code = <KEY_RESTART>;
  24                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  25                         debounce-interval = <60>;
  26                 };
  27         };
  28
  29         // Pull up on boot - otherwise the reset button won't work
  30         reset-button {
  31                 gpio-hog;
  32                 output-high;
  33                 gpios = <11 GPIO_ACTIVE_LOW>;
  34                 line-name = "reset-button";
  35         };
  36 };
  37
  38 &uart {
  39         status = "okay";
  40 };
  41
  42 &pcie {
  43         status = "okay";
  44 };
  45
  46 &spi {
  47         status = "okay";
  48         num-cs = <1>;
  49
  50         flash@0 {
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <30000000>;
  54
  55                 partitions {
  56                         compatible = "fixed-partitions";
  57                         #address-cells = <1>;
  58                         #size-cells = <1>;
  59
  60                         partition@0 {
  61                                 label = "u-boot";
  62                                 reg = <0x000000 0x40000>;
  63                                 read-only;
  64                         };
  65
  66                         partition@40000 {
  67                                 label = "u-boot-env";
  68                                 reg = <0x040000 0x10000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@50000 {
  73                                 label = "devdata";
  74                                 reg = <0x050000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@60000 {
  79                                 label = "devconf";
  80                                 reg = <0x060000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@70000 {
  85                                 label = "misc";
  86                                 reg = <0x070000 0x10000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@80000 {
  91                                 compatible = "seama";
  92                                 label = "firmware";
  93                                 reg = <0x080000 0xf50000>;
  94                         };
  95
  96                         art: partition@fd0000 {
  97                                 label = "art";
  98                                 reg = <0xfd0000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@fe0000 {
 103                                 label = "reserved";
 104                                 reg = <0xfe0000 0x20000>;
 105                                 read-only;
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &mdio0 {
 112         status = "okay";
 113
 114         phy-mask = <0>;
 115
 116         phy0: ethernet-phy@0 {
 117                 reg = <0>;
 118                 qca,mib-poll-interval = <500>;
 119
 120                 qca,ar8327-initvals = <
 121                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 122                         0x10 0x81000080 /* POWER_ON_STRIP */
 123                         0x50 0xcc35cc35 /* LED_CTRL0 */
 124                         0x54 0xcb37cb37 /* LED_CTRL1 */
 125                         0x58 0x00000000 /* LED_CTRL2 */
 126                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 127                         0x7c 0x0000007e /* PORT0_STATUS */
 128                         >;
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134
 135         pll-data = <0x03000101 0x00000101 0x00001919>;
 136
 137         phy-mode = "sgmii";
 138         phy-handle = <&phy0>;
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         qca,no-eeprom;
 144 };