target/linux/ath79/dts/qca9563_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8";
  17         };
  18
  19         aliases {
  20                 led-status = &system;
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 system: system {
  27                         label = "tp-link:green:system";
  28                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "heartbeat";
  30                 };
  31
  32                 usb {
  33                         label = "tp-link:green:usb";
  34                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                         trigger-sources = <&hub_port0>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 wifi_green {
  41                         label = "tp-link:green:wlan";
  42                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 wifi_wps {
  48                         label = "tp-link:green:wps";
  49                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  50                         default-state = "off";
  51                 };
  52
  53                 wan {
  54                         label = "tp-link:green:wan";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                 };
  58
  59                 lan1 {
  60                         label = "tp-link:green:lan1";
  61                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  62                         default-state = "off";
  63                 };
  64
  65                 lan2 {
  66                         label = "tp-link:green:lan2";
  67                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  68                         default-state = "off";
  69                 };
  70
  71                 lan3 {
  72                         label = "tp-link:green:lan3";
  73                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  74                         default-state = "off";
  75                 };
  76
  77                 lan4 {
  78                         label = "tp-link:green:lan4";
  79                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  80                         default-state = "off";
  81                 };
  82         };
  83
  84         keys {
  85                 compatible = "gpio-keys";
  86                 #address-cells = <1>;
  87                 #size-cells = <0>;
  88
  89                 reset {
  90                         label = "Reset button";
  91                         linux,code = <KEY_RESTART>;
  92                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  93                         debounce-interval = <60>;
  94                 };
  95
  96                 wifi {
  97                         label = "RFKILL button";
  98                         linux,code = <KEY_RFKILL>;
  99                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 100                         debounce-interval = <60>;
 101                 };
 102         };
 103
 104         gpio-export {
 105                 compatible = "gpio-export";
 106                 #size-cells = <0>;
 107
 108                 gpio_usb_power {
 109                         gpio-export,name = "tp-link:power:usb";
 110                         gpio-export,output = <1>;
 111                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 112                 };
 113         };
 114 };
 115
 116 &uart {
 117         status = "okay";
 118 };
 119
 120 &gpio {
 121         status = "okay";
 122 };
 123
 124 &usb_phy0 {
 125         status = "okay";
 126 };
 127
 128 &usb0 {
 129         status = "okay";
 130
 131         hub_port0: port@1 {
 132                 reg = <1>;
 133                 #trigger-source-cells = <0>;
 134         };
 135 };
 136
 137 &spi {
 138         status = "okay";
 139         num-cs = <1>;
 140
 141         flash@0 {
 142                 #address-cells = <1>;
 143                 #size-cells = <1>;
 144                 compatible = "jedec,spi-nor";
 145                 reg = <0>;
 146                 spi-max-frequency = <25000000>;
 147
 148                 partitions {
 149                         compatible = "fixed-partitions";
 150                         #address-cells = <1>;
 151                         #size-cells = <1>;
 152
 153                         partition@0 {
 154                                 label = "u-boot";
 155                                 reg = <0x000000 0x020000>;
 156                                 read-only;
 157                         };
 158
 159                         partition@20000 {
 160                                 label = "firmware";
 161                                 reg = <0x020000 0xf30000>;
 162                         };
 163
 164                         info: partition@f50000 {
 165                                 label = "product-info";
 166                                 reg = <0xf50000 0x020000>;
 167                                 read-only;
 168                         };
 169
 170                         partition@f70000 {
 171                                 label = "config";
 172                                 reg = <0xf70000 0x050000>;
 173                                 read-only;
 174                         };
 175
 176                         partition@fc0000 {
 177                                 label = "partition-table";
 178                                 reg = <0xfc0000 0x010000>;
 179                                 read-only;
 180                         };
 181
 182                         partition@fd0000 {
 183                                 label = "logs";
 184                                 reg = <0xfd0000 0x020000>;
 185                                 read-only;
 186                         };
 187
 188                         art: partition@ff0000 {
 189                                 label = "ART";
 190                                 reg = <0xff0000 0x010000>;
 191                                 read-only;
 192                         };
 193                 };
 194         };
 195 };
 196
 197 &mdio0 {
 198         status = "okay";
 199
 200         phy-mask = <0>;
 201         phy0: ethernet-phy@0 {
 202                 reg = <0>;
 203                 phy-mode = "sgmii";
 204
 205                 qca,ar8327-initvals = <
 206                     0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 207                     0x7c 0x0000007e /* PORT0_STATUS */
 208                 >;
 209         };
 210 };
 211
 212 &eth0 {
 213         status = "okay";
 214
 215         mtd-mac-address = <&info 0x8>;
 216         phy-handle = <&phy0>;
 217 };
 218
 219 &wmac {
 220         status = "okay";
 221         mtd-cal-data = <&art 0x1000>;
 222         mtd-mac-address = <&info 0x8>;
 223 };