target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi_ac {
  17                         label = "ubnt:white:dome";
  18                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  19                         default-state = "off";
  20                         linux,default-trigger = "phy0tpt";
  21                 };
  22
  23                 wifi_n {
  24                         label = "ubnt:blue:dome";
  25                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  26                         default-state = "off";
  27                         linux,default-trigger = "phy1tpt";
  28                 };
  29
  30         };
  31
  32         keys {
  33                 compatible = "gpio-keys";
  34
  35                 reset {
  36                         label = "Reset button";
  37                         linux,code = <KEY_RESTART>;
  38                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42 };
  43
  44 &uart {
  45         status = "okay";
  46 };
  47
  48 &gpio {
  49         status = "okay";
  50 };
  51
  52 &pcie {
  53         status = "okay";
  54 };
  55
  56 &spi {
  57         status = "okay";
  58         num-cs = <1>;
  59
  60         flash@0 {
  61                 compatible = "jedec,spi-nor";
  62                 reg = <0>;
  63                 spi-max-frequency = <25000000>;
  64
  65                 partitions {
  66                         compatible = "fixed-partitions";
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69
  70                         partition@0 {
  71                                 label = "u-boot";
  72                                 reg = <0x000000 0x060000>;
  73                                 read-only;
  74                         };
  75
  76                         partition@60000 {
  77                                 label = "u-boot-env";
  78                                 reg = <0x060000 0x010000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@70000 {
  83                                 label = "firmware";
  84                                 reg = <0x070000 0x790000>;
  85                         };
  86
  87                         partition@800000 {
  88                                 label = "ubnt-airos";
  89                                 reg = <0x800000 0x790000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@f90000 {
  94                                 label = "bs";
  95                                 reg = <0xf90000 0x020000>;
  96                         };
  97
  98                         partition@fb0000 {
  99                                 label = "cfg";
 100                                 reg = <0xfb0000 0x040000>;
 101                                 read-only;
 102                         };
 103
 104                         eeprom: partition@ff0000 {
 105                                 label = "EEPROM";
 106                                 reg = <0xff0000 0x010000>;
 107                                 read-only;
 108                         };
 109                 };
 110         };
 111 };
 112
 113 &wmac {
 114         status = "okay";
 115         mtd-cal-data = <&eeprom 0x1000>;
 116         mtd-mac-address = <&eeprom 0x0>;
 117 };