target/linux/bcm27xx/patches-4.19/950-0784-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch

   1 From 0b3764707993123148b4e94d44ff282b111c8edb Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Mon, 6 Jan 2020 14:05:42 +0000
   4 Subject: [PATCH] pinctrl: bcm2835: Change init order for gpio hogs
   5
   6 pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio
   7 side is registered first, but this breaks gpio hogs (which are
   8 configured during gpiochip_add_data). Part of the hog initialisation
   9 is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't
  10 yet been registered this results in an -EPROBE_DEFER from which it can
  11 never recover.
  12
  13 Change the initialisation sequence to register the pinctrl driver
  14 first.
  15
  16 See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=260600
  17
  18 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  19 ---
  20  drivers/pinctrl/bcm/pinctrl-bcm2835.c | 34 +++++++++++++--------------
  21  1 file changed, 17 insertions(+), 17 deletions(-)
  22
  23 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
  24 +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
  25 @@ -1140,9 +1140,25 @@ static int bcm2835_pinctrl_probe(struct
  26                 raw_spin_lock_init(&pc->irq_lock[i]);
  27         }
  28
  29 +       match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
  30 +       if (match) {
  31 +               bcm2835_pinctrl_desc.confops =
  32 +                       (const struct pinconf_ops *)match->data;
  33 +       }
  34 +
  35 +       pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
  36 +       if (IS_ERR(pc->pctl_dev))
  37 +               return PTR_ERR(pc->pctl_dev);
  38 +
  39 +       pc->gpio_range = bcm2835_pinctrl_gpio_range;
  40 +       pc->gpio_range.base = pc->gpio_chip.base;
  41 +       pc->gpio_range.gc = &pc->gpio_chip;
  42 +       pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
  43 +
  44         err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc);
  45         if (err) {
  46                 dev_err(dev, "could not add GPIO chip\n");
  47 +               pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
  48                 return err;
  49         }
  50
  51 @@ -1150,6 +1166,7 @@ static int bcm2835_pinctrl_probe(struct
  52                                    0, handle_level_irq, IRQ_TYPE_NONE);
  53         if (err) {
  54                 dev_info(dev, "could not add irqchip\n");
  55 +               pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
  56                 return err;
  57         }
  58
  59 @@ -1172,23 +1189,6 @@ static int bcm2835_pinctrl_probe(struct
  60                                              bcm2835_gpio_irq_handler);
  61         }
  62
  63 -       match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
  64 -       if (match) {
  65 -               bcm2835_pinctrl_desc.confops =
  66 -                       (const struct pinconf_ops *)match->data;
  67 -       }
  68 -
  69 -       pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
  70 -       if (IS_ERR(pc->pctl_dev)) {
  71 -               gpiochip_remove(&pc->gpio_chip);
  72 -               return PTR_ERR(pc->pctl_dev);
  73 -       }
  74 -
  75 -       pc->gpio_range = bcm2835_pinctrl_gpio_range;
  76 -       pc->gpio_range.base = pc->gpio_chip.base;
  77 -       pc->gpio_range.gc = &pc->gpio_chip;
  78 -       pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
  79 -
  80         return 0;
  81  }
  82