target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "NuCom R5010UN v2";
   9         compatible = "nucom,r5010un-v2", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16
  17         keys {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 23 1>;
  26                         linux,code = <KEY_RESTART>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&pinctrl 24 1>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                         debounce-interval = <60>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 inet_green {
  42                         label = "R5010UNv2:green:inet";
  43                         gpios = <&pinctrl 1 1>;
  44                 };
  45                 inet_fail_red {
  46                         label = "R5010UNv2:red:inet-fail";
  47                         gpios = <&pinctrl 2 1>;
  48                 };
  49                 dsl_red {
  50                         label = "R5010UNv2:green:dsl";
  51                         gpios = <&pinctrl 3 1>;
  52                 };
  53                 power_green {
  54                         label = "R5010UNv2:green:power";
  55                         gpios = <&pinctrl 4 1>;
  56                         default-state = "on";
  57                 };
  58                 power_fail_red {
  59                         label = "R5010UNv2:red:power-fail";
  60                         gpios = <&pinctrl 5 1>;
  61                 };
  62                 wps_green {
  63                         label = "R5010UNv2:green:wps";
  64                         gpios = <&pinctrl 10 1>;
  65                 };
  66                 usb_green {
  67                         label = "R5010UNv2:green:usb";
  68                         gpios = <&pinctrl 11 1>;
  69                 };
  70         };
  71 };
  72
  73 &hsspi {
  74         status = "ok";
  75
  76         flash@0 {
  77                 compatible = "jedec,spi-nor";
  78                 spi-max-frequency = <16666667>;
  79                 spi-tx-bus-width = <2>;
  80                 spi-rx-bus-width = <2>;
  81                 reg = <0>;
  82
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         cfe@0 {
  92                                 reg = <0x000000 0x010000>;
  93                                 label = "cfe";
  94                                 read-only;
  95                         };
  96
  97                         linux@10000 {
  98                                 reg = <0x010000 0x7e0000>;
  99                                 label = "linux";
 100                                 compatible = "brcm,bcm963xx-imagetag";
 101                         };
 102
 103                         nvram@7f0000 {
 104                                 reg = <0x7f0000 0x010000>;
 105                                 label = "nvram";
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &uart0 {
 112         status = "ok";
 113 };