target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts

   1 /dts-v1/;
   2
   3 #include "bcm6362.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "SFR Neufbox 6 (Sercomm)";
   9         compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6361", "brcm,bcm6362";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 service {
  23                         label = "service";
  24                         gpios = <&pinctrl 10 1>;
  25                         linux,code = <BTN_0>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 wlan {
  30                         label = "wlan";
  31                         gpios = <&pinctrl 12 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&pinctrl 24 1>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&pinctrl 25 1>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         switch {
  52                 compatible = "realtek,rtl8367";
  53                 gpio-sda = <&pinctrl 18 0>;
  54                 gpio-sck = <&pinctrl 20 0>;
  55
  56                 realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
  57         };
  58 };
  59
  60 &hsspi {
  61         status = "ok";
  62
  63         flash@0 {
  64                 compatible = "jedec,spi-nor";
  65                 spi-max-frequency = <20000000>;
  66                 spi-tx-bus-width = <2>;
  67                 spi-rx-bus-width = <2>;
  68                 reg = <0>;
  69
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         cfe@0 {
  79                                 reg = <0x000000 0x010000>;
  80                                 label = "cfe";
  81                                 read-only;
  82                         };
  83
  84                         linux@10000 {
  85                                 reg = <0x010000 0xfe0000>;
  86                                 label = "linux";
  87                                 compatible = "brcm,bcm963xx-imagetag";
  88                         };
  89
  90                         nvram@ff0000 {
  91                                 reg = <0xff0000 0x010000>;
  92                                 label = "nvram";
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &uart0 {
  99         status = "ok";
 100 };