brcm63xx: rename target to bcm63xx
[openwrt/staging/wigyori.git] / target / linux / brcm2708 / patches-4.19 / 950-0161-Revert-rtc-pcf8523-properly-handle-oscillator-stop-b.patch
1 From 0557d41d861b8c214b3472749482efdc71363dbb Mon Sep 17 00:00:00 2001
2 From: Phil Elwell <phil@raspberrypi.org>
3 Date: Mon, 29 Oct 2018 14:45:45 +0000
4 Subject: [PATCH] Revert "rtc: pcf8523: properly handle oscillator stop
5 bit"
6
7 This reverts commit ede44c908d44b166a5b6bd7caacd105c2ff5a70f.
8
9 See: https://github.com/raspberrypi/firmware/issues/1065
10
11 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
12 ---
13 drivers/rtc/rtc-pcf8523.c | 25 ++++++++++++++++++++++---
14 1 file changed, 22 insertions(+), 3 deletions(-)
15
16 --- a/drivers/rtc/rtc-pcf8523.c
17 +++ b/drivers/rtc/rtc-pcf8523.c
18 @@ -212,8 +212,28 @@ static int pcf8523_rtc_read_time(struct
19 if (err < 0)
20 return err;
21
22 - if (regs[0] & REG_SECONDS_OS)
23 - return -EINVAL;
24 + if (regs[0] & REG_SECONDS_OS) {
25 + /*
26 + * If the oscillator was stopped, try to clear the flag. Upon
27 + * power-up the flag is always set, but if we cannot clear it
28 + * the oscillator isn't running properly for some reason. The
29 + * sensible thing therefore is to return an error, signalling
30 + * that the clock cannot be assumed to be correct.
31 + */
32 +
33 + regs[0] &= ~REG_SECONDS_OS;
34 +
35 + err = pcf8523_write(client, REG_SECONDS, regs[0]);
36 + if (err < 0)
37 + return err;
38 +
39 + err = pcf8523_read(client, REG_SECONDS, &regs[0]);
40 + if (err < 0)
41 + return err;
42 +
43 + if (regs[0] & REG_SECONDS_OS)
44 + return -EAGAIN;
45 + }
46
47 tm->tm_sec = bcd2bin(regs[0] & 0x7f);
48 tm->tm_min = bcd2bin(regs[1] & 0x7f);
49 @@ -249,7 +269,6 @@ static int pcf8523_rtc_set_time(struct d
50 return err;
51
52 regs[0] = REG_SECONDS;
53 - /* This will purposely overwrite REG_SECONDS_OS */
54 regs[1] = bin2bcd(tm->tm_sec);
55 regs[2] = bin2bcd(tm->tm_min);
56 regs[3] = bin2bcd(tm->tm_hour);