target/linux/brcm2708/patches-4.4/0146-FIXUP-Overlay-README-Restore-spaces-deleted-in-error.patch

   1 From d32795d2be55748552ddacd9b1e47efc61264a98 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Mon, 8 Feb 2016 12:53:44 +0000
   4 Subject: [PATCH 146/170] FIXUP: Overlay README - Restore spaces deleted in
   5  error
   6
   7 ---
   8  arch/arm/boot/dts/overlays/README | 6 +++---
   9  1 file changed, 3 insertions(+), 3 deletions(-)
  10
  11 --- a/arch/arm/boot/dts/overlays/README
  12 +++ b/arch/arm/boot/dts/overlays/README
  13 @@ -550,7 +550,7 @@ Info:   Configures a single PWM channel
  14               Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
  15            2) The onboard analogue audio output uses both PWM channels.
  16            3) So be careful mixing audio and PWM.
  17 -          4) Currently the clockmust have been enabled and configured
  18 +          4) Currently the clock must have been enabled and configured
  19               by other means.
  20  Load:   dtoverlay=pwm,<param>=<val>
  21  Params: pin                     Output pin (default 18) - see table
  22 @@ -569,7 +569,7 @@ Info:   Configures both PWM channels
  23               Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
  24            2) The onboard analogue audio output uses both PWM channels.
  25            3) So be careful mixing audio and PWM.
  26 -          4) Currently the clockmust have been enabled and configured
  27 +          4) Currently the clock must have been enabled and configured
  28               by other means.
  29  Load:   dtoverlay=pwm-2chan,<param>=<val>
  30  Params: pin                     Output pin (default 18) - see table
  31 @@ -753,7 +753,7 @@ Params: <None>
  32
  33  Name:   vga666
  34  Info:   Overlay for the Fen Logic VGA666 board
  35 -        This uses GPIOs 2-21 (sono I2C), and activates the output 2-3 seconds
  36 +        This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
  37          after the kernel has started.
  38  Load:   dtoverlay=vga666
  39  Params: <None>