target/linux/brcm63xx/dts/vh4032n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Observa VH4032N";
   9         compatible = "observa,vh4032n", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&pinctrl 34 1>;
  25                         linux,code = <KEY_RESTART>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 wlan {
  30                         label = "wlan";
  31                         gpios = <&pinctrl 35 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 dsl_blue {
  41                         label = "VH4032N:blue:dsl";
  42                         gpios = <&pinctrl 2 1>;
  43                 };
  44                 dsl_red {
  45                         label = "VH4032N:red:dsl";
  46                         gpios = <&pinctrl 5 1>;
  47                 };
  48                 hspa_blue {
  49                         label = "VH4032N:blue:hspa";
  50                         gpios = <&pinctrl 11 1>;
  51                 };
  52                 hspa_red {
  53                         label = "VH4032N:red:hspa";
  54                         gpios = <&pinctrl 12 1>;
  55                 };
  56                 power_blue {
  57                         label = "VH4032N:blue:power";
  58                         gpios = <&pinctrl 22 0>;
  59                         default-state = "on";
  60                 };
  61                 power_red {
  62                         label = "VH4032N:red:power";
  63                         gpios = <&pinctrl 24 0>;
  64                 };
  65                 voice_blue {
  66                         label = "VH4032N:blue:voice";
  67                         gpios = <&pinctrl 25 1>;
  68                 };
  69                 voice_red {
  70                         label = "VH4032N:red:voice";
  71                         gpios = <&pinctrl 26 1>;
  72                 };
  73         };
  74 };
  75
  76 &pinctrl {
  77        pinctrl-names = "default";
  78        pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
  79                     &pinctrl_ephy2_led &pinctrl_ephy3_led>;
  80
  81         usb_hub_reset {
  82                 gpio-hog;
  83                 gpios = <27 0>;
  84                 output-high;
  85                 line-name = "usb-hub-reset-gpio";
  86         };
  87 };
  88
  89 &pflash {
  90         status = "ok";
  91
  92         partitions {
  93                 compatible = "fixed-partitions";
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96
  97                 cfe@0 {
  98                         label = "CFE";
  99                         reg = <0x0000000 0x0020000>;
 100                         read-only;
 101                 };
 102
 103                 linux@20000 {
 104                         label = "linux";
 105                         reg = <0x0020000 0x1fc0000>;
 106                         compatible = "brcm,bcm963xx-imagetag";
 107                 };
 108
 109                 nvram@1fe0000 {
 110                         label = "nvram";
 111                         reg = <0x1fe0000 0x020000>;
 112                 };
 113         };
 114 };
 115
 116 &uart0 {
 117         status = "ok";
 118 };