target/linux/brcm63xx/dts/wap-5813n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend WAP-5813n";
   9         compatible = "comtrend,wap-5813n", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 wlan {
  23                         label = "wlan";
  24                         gpios = <&pinctrl 32 1>;
  25                         linux,code = <KEY_WLAN>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 34 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 35 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 inet_green {
  48                         label = "WAP-5813n:green:inet";
  49                         gpios = <&pinctrl 5 0>;
  50                 };
  51                 power_green {
  52                         label = "WAP-5813n:green:power";
  53                         gpios = <&pinctrl 22 0>;
  54                         default-state = "on";
  55                 };
  56                 wps_green {
  57                         label = "WAP-5813n:green:wps";
  58                         gpios = <&pinctrl 23 1>;
  59                 };
  60                 power_red {
  61                         label = "WAP-5813n:red:power";
  62                         gpios = <&pinctrl 24 0>;
  63                 };
  64                 inet_red {
  65                         label = "WAP-5813n:red:inet";
  66                         gpios = <&pinctrl 31 0>;
  67                 };
  68         };
  69 };
  70
  71 &pflash {
  72         status = "ok";
  73
  74         partitions {
  75                 compatible = "fixed-partitions";
  76                 #address-cells = <1>;
  77                 #size-cells = <1>;
  78
  79                 cfe@0 {
  80                         label = "CFE";
  81                         reg = <0x000000 0x010000>;
  82                         read-only;
  83                 };
  84
  85                 linux@10000 {
  86                         label = "linux";
  87                         reg = <0x010000 0x7e0000>;
  88                         compatible = "brcm,bcm963xx-imagetag";
  89                 };
  90
  91                 nvram@7f0000 {
  92                         label = "nvram";
  93                         reg = <0x7f0000 0x010000>;
  94                 };
  95         };
  96 };
  97
  98 &lsspi {
  99         switch@0 {
 100                 compatible = "brcm,bcm53115";
 101                 reg = <0>;
 102                 spi-max-frequency = <781000>;
 103
 104                 lede,alias = "eth0";
 105
 106                 ports {
 107                         #address-cells = <1>;
 108                         #size-cells = <0>;
 109
 110                         lan@0 {
 111                                 reg = <0>;
 112                                 label = "lan4";
 113                         };
 114
 115                         lan@1 {
 116                                 reg = <1>;
 117                                 label = "lan3";
 118                         };
 119
 120                         lan@2 {
 121                                 reg = <2>;
 122                                 label = "lan2";
 123                         };
 124
 125                         lan@3 {
 126                                 reg = <3>;
 127                                 label = "lan1";
 128                         };
 129
 130                         wan@4 {
 131                                 reg = <4>;
 132                                 label = "wan";
 133                         };
 134
 135                         cpu@5 {
 136                                 reg = <5>;
 137                                 label = "cpu";
 138
 139                                 fixed-link {
 140                                         speed = <1000>;
 141                                         full-duplex;
 142                                         asym-pause;
 143                                         pause;
 144                                 };
 145                         };
 146                 };
 147         };
 148 };
 149
 150 &pinctrl {
 151         pinctrl-names = "default";
 152         pinctrl-0 = <&pinctrl_pci>;
 153 };
 154
 155 &uart0 {
 156         status = "ok";
 157 };