e2805c1d9ec5d8135847378e8e212c3f4afc819d
[openwrt/staging/wigyori.git] / target / linux / ipq40xx / image / Makefile
1 include $(TOPDIR)/rules.mk
2 include $(INCLUDE_DIR)/image.mk
3
4 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
5
6 define Device/Default
7 PROFILES := Default
8 KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
9 KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
10 KERNEL_PREFIX := $$(IMAGE_PREFIX)
11 KERNEL_LOADADDR := 0x80208000
12 SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
13 IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
14 IMAGE/sysupgrade.bin/squashfs :=
15 endef
16
17 define Device/FitImage
18 KERNEL_SUFFIX := -fit-uImage.itb
19 KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
20 KERNEL_NAME := Image
21 endef
22
23 define Device/FitImageLzma
24 KERNEL_SUFFIX := -fit-uImage.itb
25 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
26 KERNEL_NAME := Image
27 endef
28
29 define Device/FitzImage
30 KERNEL_SUFFIX := -fit-zImage.itb
31 KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
32 KERNEL_NAME := zImage
33 endef
34
35 define Device/UbiFit
36 KERNEL_IN_UBI := 1
37 IMAGES := nand-factory.ubi nand-sysupgrade.bin
38 IMAGE/nand-factory.ubi := append-ubi
39 IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
40 endef
41
42 define Device/DniImage
43 KERNEL_SUFFIX := -fit-uImage.itb
44 KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
45 KERNEL_NAME := Image
46 NETGEAR_BOARD_ID :=
47 NETGEAR_HW_ID :=
48 IMAGES := factory.img sysupgrade.bin
49 IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
50 IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
51 endef
52 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
53
54
55 define Device/8dev_jalapeno
56 $(call Device/FitImage)
57 $(call Device/UbiFit)
58 DEVICE_DTS := qcom-ipq4018-jalapeno
59 BLOCKSIZE := 128k
60 PAGESIZE := 2048
61 DEVICE_TITLE := 8devices Jalapeno
62 endef
63 TARGET_DEVICES += 8dev_jalapeno
64
65 define Device/alfa-network_ap120c-ac
66 $(call Device/FitImage)
67 $(call Device/UbiFit)
68 DEVICE_TITLE := ALFA Network AP120C-AC
69 DEVICE_DTS := qcom-ipq4018-ap120c-ac
70 DEVICE_PACKAGES := ipq-wifi-alfa-network_ap120c-ac kmod-usb-acm \
71 kmod-tpm-i2c-atmel uboot-envtools
72 BLOCKSIZE := 128k
73 PAGESIZE := 2048
74 IMAGE_SIZE := 65536k
75 IMAGES := nand-factory.bin nand-sysupgrade.bin
76 IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
77 endef
78 TARGET_DEVICES += alfa-network_ap120c-ac
79
80 define Device/asus_map-ac2200
81 $(call Device/FitImageLzma)
82 DEVICE_DTS := qcom-ipq4019-map-ac2200
83 DEVICE_TITLE := ASUS Lyra MAP-AC2200
84 IMAGES := sysupgrade.bin
85 DEVICE_PACKAGES := ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k
86 endef
87 TARGET_DEVICES += asus_map-ac2200
88
89 define Device/asus_rt-ac58u
90 $(call Device/FitImageLzma)
91 DEVICE_DTS := qcom-ipq4018-rt-ac58u
92 BLOCKSIZE := 128k
93 PAGESIZE := 2048
94 DTB_SIZE := 65536
95 DEVICE_TITLE := Asus RT-AC58U
96 IMAGE_SIZE := 20439364
97 FILESYSTEMS := squashfs
98 # Someone - in their infinite wisdom - decided to put the firmware
99 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
100 # Since u-boot works with strings we either need another fixup step
101 # to add a version... or we are very careful not to add '\0' into that
102 # string and call it a day.... Yeah, we do the latter!
103 UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
104 IMAGES := sysupgrade.bin
105 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
106 endef
107 TARGET_DEVICES += asus_rt-ac58u
108
109 define Device/avm_fritzbox-4040
110 $(call Device/FitImageLzma)
111 DEVICE_DTS := qcom-ipq4018-fritz4040
112 BOARD_NAME := fritz4040
113 DEVICE_TITLE := AVM Fritz!Box 4040
114 IMAGE_SIZE := 29753344
115 UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
116 UBOOT_PARTITION_SIZE := 524288
117 IMAGES = eva.bin sysupgrade.bin
118 IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
119 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
120 DEVICE_PACKAGES := fritz-tffs fritz-caldata
121 endef
122 TARGET_DEVICES += avm_fritzbox-4040
123
124 define Device/avm_fritzbox-7530
125 $(call Device/FitImageLzma)
126 DEVICE_DTS := qcom-ipq4019-fritzbox-7530
127 DEVICE_TITLE := AVM Fritz!Box 7530
128 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzbox-7530
129 IMAGES := sysupgrade.bin
130 endef
131 TARGET_DEVICES += avm_fritzbox-7530
132
133 define Device/compex_wpj428
134 $(call Device/FitImage)
135 DEVICE_DTS := qcom-ipq4028-wpj428
136 DEVICE_DTS_CONFIG := config@4
137 BLOCKSIZE := 64k
138 DEVICE_TITLE := Compex WPJ428
139 IMAGE_SIZE := 31232k
140 KERNEL_SIZE := 4096k
141 IMAGES = sysupgrade.bin
142 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
143 DEVICE_PACKAGES := kmod-gpio-beeper
144 endef
145 TARGET_DEVICES += compex_wpj428
146
147 define Device/engenius_eap1300
148 $(call Device/FitImage)
149 DEVICE_TITLE := EnGenius EAP1300
150 DEVICE_DTS_CONFIG := config@4
151 BOARD_NAME := eap1300
152 DEVICE_DTS := qcom-ipq4018-eap1300
153 KERNEL_SIZE := 5120k
154 IMAGE_SIZE := 25344k
155 IMAGES := sysupgrade.bin
156 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
157 DEVICE_PACKAGES := ipq-wifi-engenius_eap1300
158 endef
159 TARGET_DEVICES += engenius_eap1300
160
161 define Device/glinet_gl-b1300
162 $(call Device/FitImage)
163 DEVICE_TITLE := GL.iNet GL-B1300
164 BOARD_NAME := gl-b1300
165 DEVICE_DTS := qcom-ipq4029-gl-b1300
166 KERNEL_SIZE := 4096k
167 IMAGE_SIZE := 26624k
168 IMAGES := sysupgrade.bin
169 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
170 endef
171 TARGET_DEVICES += glinet_gl-b1300
172
173 define Device/linksys_ea6350v3
174 # The Linksys EA6350v3 has a uboot bootloader that does not
175 # support either booting lzma kernel images nor booting UBI
176 # partitions. This uboot, however, supports raw kernel images and
177 # gzipped images.
178 #
179 # As for the time of writing this, the device will boot the kernel
180 # from a fixed address with a fixed length of 3MiB. Also, the
181 # device has a hard-coded kernel command line that requieres the
182 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
183 # Oh... and the kernel partition overlaps with the rootfs
184 # partition (the same for alt_kernel and alt_rootfs).
185 #
186 # If you are planing re-partitioning the device, you may want to
187 # keep those details in mind:
188 # 1. The kernel adresses you should honor are 0x00000000 and
189 # 0x02800000 respectively.
190 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
191 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
192 # 4. The kernel command line from uboot is harcoded to boot with
193 # rootfs either in mtd11 or mtd13.
194 $(call Device/FitzImage)
195 DEVICE_TITLE := Linksys EA6350v3
196 DEVICE_DTS := qcom-ipq4018-ea6350v3
197 BLOCKSIZE := 128k
198 PAGESIZE := 2048
199 KERNEL_SIZE := 3145728
200 IMAGE_SIZE := 38797312
201 UBINIZE_OPTS := -E 5
202 IMAGES := factory.bin sysupgrade.bin
203 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$${KERNEL_SIZE} | append-ubi | linksys-image type=EA6350v3
204 DEVICE_PACKAGES := ipq-wifi-linksys_ea6350v3 uboot-envtools
205 endef
206 TARGET_DEVICES += linksys_ea6350v3
207
208 define Device/meraki_mr33
209 $(call Device/FitImage)
210 DEVICE_DTS := qcom-ipq4029-mr33
211 BLOCKSIZE := 131072
212 PAGESIZE := 2048
213 DEVICE_TITLE := Cisco Meraki MR33
214 IMAGES = sysupgrade.bin
215 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
216 endef
217 TARGET_DEVICES += meraki_mr33
218
219 define Device/netgear_ex61x0v2
220 $(call Device/DniImage)
221 DEVICE_DTS_CONFIG := config@4
222 NETGEAR_BOARD_ID := EX6150v2series
223 NETGEAR_HW_ID := 29765285+16+0+128+2x2
224 endef
225
226 define Device/netgear_ex6100v2
227 $(call Device/netgear_ex61x0v2)
228 DEVICE_DTS := qcom-ipq4018-ex6100v2
229 DEVICE_TITLE := Netgear EX6100v2
230 endef
231 TARGET_DEVICES += netgear_ex6100v2
232
233 define Device/netgear_ex6150v2
234 $(call Device/netgear_ex61x0v2)
235 DEVICE_DTS := qcom-ipq4018-ex6150v2
236 DEVICE_TITLE := Netgear EX6150v2
237 endef
238 TARGET_DEVICES += netgear_ex6150v2
239
240 define Device/openmesh_a42
241 $(call Device/FitImageLzma)
242 DEVICE_DTS := qcom-ipq4018-a42
243 DEVICE_DTS_CONFIG := config@om.a42
244 BLOCKSIZE := 64k
245 DEVICE_TITLE := OpenMesh A42
246 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
247 IMAGE_SIZE := 15616k
248 IMAGES = factory.bin sysupgrade.bin
249 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
250 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
251 DEVICE_PACKAGES := uboot-envtools
252 endef
253 TARGET_DEVICES += openmesh_a42
254
255 define Device/openmesh_a62
256 $(call Device/FitImageLzma)
257 DEVICE_DTS := qcom-ipq4019-a62
258 DEVICE_DTS_CONFIG := config@om.a62
259 BLOCKSIZE := 64k
260 DEVICE_TITLE := OpenMesh A62
261 KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
262 IMAGE_SIZE := 15552k
263 IMAGES = factory.bin sysupgrade.bin
264 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
265 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
266 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
267 endef
268
269 TARGET_DEVICES += openmesh_a62
270
271 define Device/qcom_ap-dk01.1-c1
272 DEVICE_TITLE := QCA AP-DK01.1-C1
273 BOARD_NAME := ap-dk01.1-c1
274 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
275 KERNEL_INSTALL := 1
276 KERNEL_SIZE := 4096k
277 IMAGE_SIZE := 26624k
278 $(call Device/FitImage)
279 IMAGES := sysupgrade.bin
280 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
281 endef
282 TARGET_DEVICES += qcom_ap-dk01.1-c1
283
284 define Device/qcom_ap-dk04.1-c1
285 $(call Device/FitImage)
286 $(call Device/UbiFit)
287 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
288 KERNEL_INSTALL := 1
289 KERNEL_SIZE := 4048k
290 BLOCKSIZE := 128k
291 PAGESIZE := 2048
292 BOARD_NAME := ap-dk04.1-c1
293 DEVICE_TITLE := QCA AP-DK04.1-C1
294 endef
295 TARGET_DEVICES += qcom_ap-dk04.1-c1
296
297 define Device/qxwlan_e2600ac-c1
298 $(call Device/FitImage)
299 DEVICE_TITLE := Qxwlan E2600AC-C1 (nor flash)
300 BOARD_NAME := e2600ac-c1
301 DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c1
302 KERNEL_SIZE := 4096k
303 IMAGE_SIZE := 31232k
304 IMAGES := sysupgrade.bin
305 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
306 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
307 endef
308 TARGET_DEVICES += qxwlan_e2600ac-c1
309
310 define Device/qxwlan_e2600ac-c2
311 $(call Device/FitImage)
312 $(call Device/UbiFit)
313 DEVICE_DTS := qcom-ipq4019-qxwlan-e2600ac-c2
314 KERNEL_INSTALL := 1
315 BLOCKSIZE := 128k
316 PAGESIZE := 2048
317 DEVICE_TITLE := Qxwlan E2600AC-C2 (nornand flash)
318 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
319 endef
320 TARGET_DEVICES += qxwlan_e2600ac-c2
321
322 define Device/zyxel_nbg6617
323 $(call Device/FitImageLzma)
324 DEVICE_DTS := qcom-ipq4018-nbg6617
325 DEVICE_TITLE := ZyXEL NBG6617
326 ROOTFS_SIZE := 24960k
327 RAS_BOARD := NBG6617
328 RAS_ROOTFS_SIZE := 19840k
329 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
330 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
331 IMAGES := sysupgrade.bin factory.bin
332 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
333 # at least as large as the one of the initial firmware image (not the current
334 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
335 # this minimum-size. However, the larger image can be flashed both ways.
336 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
337 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
338 DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
339 endef
340 TARGET_DEVICES += zyxel_nbg6617
341
342 define Device/zyxel_wre6606
343 $(call Device/FitImage)
344 DEVICE_TITLE := ZyXEL WRE6606
345 DEVICE_DTS_CONFIG := config@4
346 DEVICE_DTS := qcom-ipq4018-wre6606
347 IMAGES := sysupgrade.bin
348 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
349 endef
350 TARGET_DEVICES += zyxel_wre6606
351
352 $(eval $(call BuildImage))