target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 encaps="llc"
  16 payload="bridged"
  17 lan_mac=""
  18 wan_mac=""
  19 interface_wan=""
  20
  21 board=$(lantiq_board_name)
  22
  23 case "$board" in
  24 # adm6996
  25 ARV4510PW)
  26         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  27         wan_mac=$(macaddr_add "$lan_mac" 1)
  28         ucidef_add_switch "switch0" \
  29                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  30         ;;
  31
  32 ARV4520PW)
  33         ucidef_add_switch "switch0" \
  34                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  35         ;;
  36
  37 ACMP252|GIGASX76X)
  38         ucidef_add_switch "switch0" \
  39                 "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
  40         ;;
  41
  42 # ar8316
  43 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
  44         ucidef_add_switch "switch0" \
  45                 "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
  46         ;;
  47
  48 # rtl8306g
  49 ARV7506PW11)
  50         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  51         ucidef_add_switch "switch0" \
  52                 "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
  53         ;;
  54
  55 # rtl8306g
  56 ARV7519PW)
  57         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  58         ucidef_add_switch "switch0" \
  59                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
  60         ;;
  61
  62 WBMR)
  63         ucidef_add_switch "switch0" \
  64                 "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
  65         ;;
  66
  67 VG3503J)
  68         ucidef_set_interface_lan 'eth0'
  69         ;;
  70
  71 ARV4518PWR01*)
  72         ucidef_set_interface_lan 'eth0'
  73         ;;
  74
  75 DGN3500*)
  76         ucidef_add_switch "switch0" \
  77                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  78         ;;
  79
  80 FRITZ7360SL)
  81         ucidef_add_switch "switch0" \
  82                 "4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
  83         ;;
  84
  85 H201L)
  86         ucidef_add_switch "switch0" \
  87                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
  88         ;;
  89
  90 #rtl8306g
  91 P2601HNFX)
  92         ucidef_add_switch "switch0" \
  93                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
  94         ;;
  95
  96 P2812HNUF*)
  97         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
  98         wan_mac=$(macaddr_add "$lan_mac" 1)
  99         ucidef_add_switch "switch0" \
 100                 "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
 101         ;;
 102
 103 TDW8970|TDW8980)
 104         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 105         ucidef_add_switch "switch0" \
 106                 "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 107         ;;
 108
 109 VR200v)
 110         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 111         ucidef_add_switch "switch0" \
 112                 "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 113         ;;
 114
 115 ARV7519RW22)
 116         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 117         ucidef_add_switch "switch0" \
 118                 "0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
 119         ;;
 120
 121 BTHOMEHUBV2B)
 122         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 123         wan_mac=$(macaddr_add "$lan_mac" 1)
 124         ucidef_add_switch "switch0" \
 125                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
 126         ;;
 127
 128 BTHOMEHUBV3A)
 129         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 130         wan_mac=$(macaddr_add "$lan_mac" 1)
 131         ucidef_set_interface_lan 'eth0'
 132         ;;
 133
 134 BTHOMEHUBV5A)
 135         wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
 136         ucidef_add_switch "switch0" \
 137                 "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
 138         ;;
 139
 140 VGV7519)
 141         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 142         ucidef_add_switch "switch0" \
 143                 "4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
 144         ;;
 145
 146 VGV7510KW22)
 147         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 148         ucidef_add_switch "switch0" \
 149                 "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 150         ;;
 151
 152 WBMR300)
 153         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 154         wan_mac="$lan_mac"
 155         ucidef_add_switch "switch0" \
 156                 "2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
 157         ;;
 158
 159 EASY80920NAND|EASY80920NOR)
 160         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 161         wan_mac=$(macaddr_add "$lan_mac" 1)
 162         ucidef_add_switch "switch0" \
 163                 "4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t@eth0"
 164         ;;
 165
 166 *)
 167         ucidef_set_interface_lan 'eth0'
 168         ;;
 169
 170 esac
 171
 172 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 173         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 174 fi
 175
 176 if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
 177         interface_wan="ptm0"
 178         ucidef_add_vdsl_modem "$annex" "av" "ptm"
 179 else
 180         interface_wan="nas0"
 181         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 182 fi
 183
 184 ucidef_set_interface_wan "$interface_wan" "pppoe"
 185
 186 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan "$lan_mac"
 187 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan "$wan_mac"
 188
 189 board_config_flush
 190
 191 exit 0